diff -Nru fastjet-3.0.3+dfsg/ChangeLog fastjet-3.0.6+dfsg/ChangeLog --- fastjet-3.0.3+dfsg/ChangeLog 2012-06-25 14:19:52.000000000 +0000 +++ fastjet-3.0.6+dfsg/ChangeLog 2013-10-28 16:09:45.000000000 +0000 @@ -1,3 +1,297 @@ +2013-10-29 Gavin SALAM + Matteo + + * NEWS: + Release of FastJet fastjet-3.0.6 + + * configure.ac: + * include/fastjet/config_win.h: + * Doxyfile: + * tex/fastjet-doc.tex: + changed version to 3.0.6 + +2013-10-28 Gavin Salam + + * plugins/D0RunIICone/ConeSplitMerge.hpp: + made ProtoJet_ET_seedET_order::operator() const, to fix compilation + issue under OS X 10.9 (Mavericks). + + * plugins/CDFCones/CDFcode/JetCluAlgorithm.cc: + included and switched abs -> std::abs to fix compilation + issue under OS X 10.9 (Mavericks). This and the above one reported + by David Grellscheid and Pere Mato Vila. + + * example/11-filter.cc: + * tools/MassDropTagger.cc: + * tools/JHTopTagger.cc: + fixed bugs where (! a==b) was being used instead of + (a!=b) in certain consistency checks. In the two taggers, this + should only affect whether a warning is produced when called with + algorithms other than Cambridge/Aachen. Reported by David + Grellscheid. + +2013-10-25 Gavin SALAM + Matteo + + * plugins/GridJet/fastjet/GridJetPlugin.hh: + added drap(), dphi(), rapmin() and rapmax() query functions to get + actual grid spacings. + + Merged 2013-10-28 from development trunk revision 3247. + +2013-09-16 Gregory Soyez + + * configure.ac: + * include/fastjet/config_win.h: + * Doxyfile: + * tex/fastjet-doc.tex: + changed version to 3.0.6-devel + +2013-09-16 Gregory Soyez + + * NEWS: + Release of FastJet fastjet-3.0.5 + + * configure.ac: + * include/fastjet/config_win.h: + * Doxyfile: + * tex/fastjet-doc.tex: + changed version to 3.0.5 + + * src/ClusterSequence_TiledN2.cc (_tiled_N2_cluster): + added a dummy initialisation of oldB.tile_index at the start of + two more routines so as to resolve a long-standing (worrying, but bogus) gcc + warning about uninitialised variables. (Taken from 3.1-devel trunk). + [extension of same fix mentioned 20 lines below] + +2013-09-15 Gavin Salam (later still) + + * NEWS: + drafted 3.0.5 NEWS + +2013-09-15 Gavin Salam (later) + + * example/fastjet_timing_plugins.cc (main): + added -etamax option back in, but it now prints a warning that + it's actually just setting a maximum rapidity. + +2013-09-15 Gavin Salam + + * regression-tests/nightly-check.pl: + merged revisions 3160 and 3184 from trunk to disable zetes and add + g++4.6 and 4.7 to checks + + * src/ClusterSequence_TiledN2.cc (_minheap_faster_tiled_N2_cluster): + added a dummy initialisation of oldB.tile_index at the start of + the routine so as to resolve a long-standing (worrying, but bogus) gcc + warning about uninitialised variables. (Taken from 3.1-devel trunk). + + * autogen.sh: + small fix for glibtool tests (added an "x" in front on `whereis + glibtool`). + +2013-09-15 Gavin Salam + + * include/fastjet/Selector.hh: + * include/fastjet/NNH.hh: + * include/fastjet/internal/ClusterSequence_N2.icc: + these files had guards without FASTJET_ in their name, as a result + of which the fjcore files had identical guards, causing a + conflict. the FASTJET_ tag has now been added. (Merge of rev.3202 + from trunk). + +2013-09-13 Gavin Salam + Matteo + + * regression-tests/test-all-algs.pl: + replaced -etamax -> -rapmax (following yesterday's change); + fixed an issue where bkgds & areas were giving problems when + running more than one strategy (to do with copies v. aliases in + foreach loops). + + updated checksums for background estimations with -rapmax option, + in light of yesterday's bugfix in fastjet_timing_plugins. Internal + program consistency should be OK given that the nightly check from + the night before last came out OK (and we haven't touched core + code since then). + + Also added some extra checksums for quick tests with 10 events. + + These changes merged from revisions 3189, 3192, 3199 from trunk + (2013-09-15, +some manual adjustment). + +2013-09-12 Gavin Salam + Matteo + + * example/fastjet_timing_plugins.cc: + replaced -etamax option with -rapmax and fixed bug that it was + acting only as an upper limit of rapidity. (Not a lower limit) + +2013-07-31 Gregory Soyez + + * example/data/Makefile.am (EXTRA_DIST): + added the missing boosted top event to the distribution + +2013-06-05 Gavin SALAM + + * switched version to 3.0.5-devel, and SISCone back to trunk + +2013-06-05 Gavin SALAM + Matteo + + * Release of FastJet fastjet-3.0.4, including SISCone 2.0.6 + +2013-06-05 Gavin SALAM + Matteo + + * example/fastjet_timing_plugins.cc: + fixed a couple of harmless errors in the messages + concerning missing plugins; added protection in case of null + extras for SISCone. Both brought in from trunk. + + * scripts/mkfjcore.sh: + DROP_CGAL gets renamed __FJCORE_DROP_CGAL (only in core). + also renamed a bunch of FASTJET_XXX (from autotools) -> + FJCORE_XXX + + Added the NNH headers, for those who wish to build their own algs. + + * include/fastjet/SharedPtr.hh: + replaced USETR1SHAREDPTR -> __FASTJET_USETR1SHAREDPTR + + * regression-tests/nightly-check.pl: + copied this across from rev.3127 of trunk + +2013-05-05 Matteo Cacciari + * scripts/mkfjcore.sh + added sed lines to remove a block beginning with #ifndef WIN32 + in fjcore.hh + + +2013-05-04 Gavin Salam + + * include/fastjet/ClusterSequence.hh: + * src/ClusterSequence_Delaunay.cc + moved inclusion of DynamicNearestNeighbours.hh from + ClusterSequence.hh (a forward definition is sufficient) to the + Delaunay file. + + * scripts/mkfjcore.sh + added renaming of fastjet:: in fastjet files; + moved more headers from internal headers to internal sources, to + reduce .hh file size (from 2200 lines to 1600 lines; cc file of + course grows to compensate). + + * include/fastjet/PseudoJet.hh: + added explicit fastjet:: to cast_if_derived call, to avoid + ambiguities when converting from fastjet to fjcore PseudoJets + (and vice versa), where it wasn't clear whether to use fastjet:: + or fjcore:: cast_if_derived. + +2013-05-03 Gavin SALAM + Matteo + + * include/fastjet/internal/SearchTree.hh: + renamed TRACK_DEPTH define as __FASTJET_SEARCHTREE_TRACK_DEPTH + + * scripts/mkfjcore.sh + added renaming of __FASTJET* definitions + +2013-04-29 Matteo Cacciari + Gregory + + * scripts/mkfjcore.sh + updated comment and enable plugin tags removals + +2013-04-07 Gavin SALAM + + * regression-tests/nightly-check.pl: + copied across latest version from trunk + +2013-04-06 Matteo Cacciari + + * include/fastjet/PseudoJet.hh: + * src/PseudoJet.cc: + in response to request from ATLAS, initialize PseudoJet::_rap to + a dummy value even though it's not necessary, in order to avoid + NaN's in ATLAS rigid NaN tests. + [ported from 3.1-devel, revs 3068/3069] + + +2013-04-06 Gavin Salam + + * configure.ac: + backported autotools changes needed for compatibility with + autoconf 2.69 + automake 1.13 + [manually ported from 3.1-devel, part of revs. 3065, 3066 & 3081] + + * switched SISCone back over to trunk (which also has autotools fixes) + +2013-04-05 Matteo Cacciari + + * include/fastjet/internal/SearchTree.hh (template): + a further fix for clang v1.1 (release 27) compilation + [ported from 3.1-devel, rev. 2886/2888] + + * doc/fastjet-doc.tex (section{Introduction}): + added a footnote about stopping the exclusive algorithm once it + reaches a predetermined number of jets. (Thanks to Giulia + Zanderighi for pointing out this omission). + [ported from 3.1-devel, rev. 2893] + + * src/ClusterSequence.cc (print_banner): + updated references in the banner + [ported from 3.1-devel, rev. 2898] + + * m4/CGAL.m4: + linked against gmp, gmpxx and mpfr if available (this provides a + more robust CGAL support as in some cases -lgmp has to be + explicitly included at link time) + [ported from 3.1-devel, rev. 3028] + + +2013-04-01 Matteo Cacciari + + * scripts/mkfjcore.sh *** ADDED *** + * scripts/preamble-fjcore.txt *** ADDED *** + * scripts/Makefile-fjcore.txt *** ADDED *** + Script, and text to be added to the resulting files, + to automatically extract fjcore.cc|.hh from the full + FastJet distibution. + With respect the the version currently in 3.1-devel, + mkfjcore.sh now also replaces the fastjet namespace with + the fjcore one. A note about this is added in preamble-fjcore.txt + + Also, mkfjcore.sh now copies the single-event.dat file to the fjcore + directory, together with a makefile copied from Makefile-fjcore, + and leaves the 01-basic.cc example there. + Finally, the preamble is also copied into a README file. + + + * src/ClusterSequenceStructure.cc + * src/CompositeJetStructure.cc + * src/PseudoJet.cc + * src/PseudoJetStructureBase.cc + * src/Selector.cc + * include/fastjet/ClusterSequenceStructure.cc + * include/fastjet/CompositeJetStructure.cc + * include/fastjet/PseudoJet.cc + * include/fastjet/PseudoJetStructureBase.cc + * include/fastjet/Selector.cc + addition of "ifndef __FJCORE__" and corresponding #endif's + to mark code to be excluded from fjcore.cc|hh + + * include/fastjet/internal/IsBase.hh + in cast_if_derived(), replaced a NULL with "0" to avoid having + to include cstdlib (breaks in fjcore otherwise. This modification + is consistent with the one already made in 3.1-devel) + + * src/ClosestPair2D.cc (closest_pair): + use std::swap instead of swap (i.e. make the namespace explicit + to avoid conflict with fastjet::swap in SharedPtr (only needed + because we are in the fastJet namespace) + [modification and comment backported from 3.1-devel] + +2012-06-26 Gavin SALAM + Matteo + Gregory + + * configure.ac: + * include/fastjet/config_win.h: + * Doxyfile: + * tex/fastjet-doc.tex: + changed version to 3.0.4-devel + 2012-06-25 Gavin SALAM + Gregory + Matteo * Release of FastJet fastjet-3.0.3 @@ -880,7 +1174,7 @@ reverted a misordered #endif and namespace } * include/fastjet/internal/IsBase.hh: - fised a typo in a class name in a doxygen comment + fixed a typo in a class name in a doxygen comment * src/genconfig.sh: added the FASTJET_ prefix for the GridJet plugin diff -Nru fastjet-3.0.3+dfsg/Doxyfile fastjet-3.0.6+dfsg/Doxyfile --- fastjet-3.0.3+dfsg/Doxyfile 2012-06-25 14:15:32.000000000 +0000 +++ fastjet-3.0.6+dfsg/Doxyfile 2013-10-28 16:07:59.000000000 +0000 @@ -31,7 +31,7 @@ # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 3.0.3 +PROJECT_NUMBER = 3.0.6 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) # base path where the generated documentation will be put. diff -Nru fastjet-3.0.3+dfsg/Makefile.in fastjet-3.0.6+dfsg/Makefile.in --- fastjet-3.0.3+dfsg/Makefile.in 2012-06-25 14:16:27.000000000 +0000 +++ fastjet-3.0.6+dfsg/Makefile.in 2013-10-28 16:10:54.000000000 +0000 @@ -165,7 +165,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -198,7 +197,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -211,7 +209,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -224,7 +221,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -260,6 +256,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ @@ -722,7 +719,7 @@ *.zip*) \ unzip $(distdir).zip ;;\ esac - chmod -R a-w $(distdir); chmod a+w $(distdir) + chmod -R a-w $(distdir); chmod u+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) diff -Nru fastjet-3.0.3+dfsg/NEWS fastjet-3.0.6+dfsg/NEWS --- fastjet-3.0.3+dfsg/NEWS 2012-06-25 14:13:54.000000000 +0000 +++ fastjet-3.0.6+dfsg/NEWS 2013-10-28 16:14:00.000000000 +0000 @@ -2,6 +2,31 @@ ------------------------- ================================================================ +Summary of changes from v3.0.5 -> v3.0.6: 2013-10-29 +================================================================ +This is a minor maintenance release. Main changes: +* fixed compilation issues for two plugins under OS X 10.9 (Mavericks) +* fixed incorrect warnings in JHTopTagger, MassDropTagger and an example +* GridJetPlugin now has extra enquiry functions + +================================================================ +Summary of changes from v3.0.4 -> v3.0.5: 2013-09-16 +================================================================ +This is a minor maintenance release. Main changes: +* modified include guards, to solve coexistence issue for fjcore +* resolved (bogus) compiler warning about uninitialised variables +* added an example event file that was missing from the distribution + +================================================================ +Summary of changes from v3.0.3 -> v3.0.4: 2013-06-05 +================================================================ + +This is a minor maintenance release. Changes include: +* dummy init of PseudoJet rapidity to avoid warnings with some configs. +* minor code structure adjustments to allow for release of fjcore +* inclusion of SISCone 2.0.6 + +================================================================ Summary of changes from v3.0.2 -> v3.0.3: 26/06/12 ================================================================ diff -Nru fastjet-3.0.3+dfsg/aclocal.m4 fastjet-3.0.6+dfsg/aclocal.m4 --- fastjet-3.0.3+dfsg/aclocal.m4 2012-06-25 14:16:22.000000000 +0000 +++ fastjet-3.0.6+dfsg/aclocal.m4 2013-10-28 16:10:49.000000000 +0000 @@ -13,8 +13,8 @@ m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],, -[m4_warning([this file was generated for autoconf 2.68. +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],, +[m4_warning([this file was generated for autoconf 2.63. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) @@ -406,18 +406,6 @@ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 8 - -# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. -AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) - # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, diff -Nru fastjet-3.0.3+dfsg/config.h.in fastjet-3.0.6+dfsg/config.h.in --- fastjet-3.0.3+dfsg/config.h.in 2012-06-25 14:16:40.000000000 +0000 +++ fastjet-3.0.6+dfsg/config.h.in 2013-10-28 16:11:07.000000000 +0000 @@ -91,9 +91,6 @@ /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME -/* Define to the home page for this package. */ -#undef PACKAGE_URL - /* Define to the version of this package. */ #undef PACKAGE_VERSION diff -Nru fastjet-3.0.3+dfsg/configure fastjet-3.0.6+dfsg/configure --- fastjet-3.0.3+dfsg/configure 2012-06-25 14:16:23.000000000 +0000 +++ fastjet-3.0.6+dfsg/configure 2013-10-28 16:10:51.000000000 +0000 @@ -1,22 +1,18 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.68 for FastJet 3.0.3. -# +# Generated by GNU Autoconf 2.63 for FastJet 3.0.6. # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software -# Foundation, Inc. -# -# +# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which @@ -24,15 +20,23 @@ alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; esac + fi + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + as_nl=' ' export as_nl @@ -40,13 +44,7 @@ as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else @@ -57,7 +55,7 @@ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; - case $arg in #( + case $arg in *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; @@ -80,6 +78,13 @@ } fi +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + # IFS # We need space, tab and new line, in precisely that order. Quoting is @@ -89,16 +94,15 @@ IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( +case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done IFS=$as_save_IFS ;; @@ -110,16 +114,12 @@ fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 + { (exit 1); exit 1; } fi -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' @@ -131,314 +131,330 @@ LANGUAGE=C export LANGUAGE +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + # CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +$as_unset CDPATH + if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST + if (eval ":") 2>/dev/null; then + as_have_required=yes else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac + as_have_required=no fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } + + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1 - - test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ - || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes +if as_func_success; then + : else - as_have_required=no + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : +if as_func_ret_success; then + : else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( + case $as_dir in /*) for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" done;; esac - as_found=false done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } IFS=$as_save_IFS - if test "x$CONFIG_SHELL" != x; then : - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. - # Preserve -v and -x to the replacement shell. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL - case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; - esac - exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} -fi + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, -$0: including any error possibly output before this -$0: message. Then install a modern shell, or manually run -$0: the script under such a shell if you do have one." - fi - exit 1 -fi fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 } -as_unset=as_fn_unset -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi -} # as_fn_mkdir_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' +if ( set x; as_func_ret_success y && test x = "$1" ); then + : else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append + exitcode=1 + echo positional parameters were not saved. +fi -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith +test $exitcode = 0) || { (exit 1); exit 1; } +( + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error +_ASEOF +}; then + break +fi -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : else - as_expr=false + exitcode=1 + echo as_func_success failed. fi -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : else - as_basename=false + exitcode=1 + echo as_func_ret_success failed. fi -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : else - as_dirname=false + exitcode=1 + echo positional parameters were not saved. fi -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell bug-autoconf@gnu.org about your system, + echo including any error possibly output before this message. + echo This can help us improve future autoconf versions. + echo Configuration will now proceed without shell functions. +} -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= @@ -455,7 +471,8 @@ s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the @@ -465,18 +482,29 @@ exit } + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( +case `echo -n x` in -n*) - case `echo 'xy\c'` in + case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; + *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then @@ -506,7 +534,7 @@ rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' + as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false @@ -525,10 +553,10 @@ if test -d "$1"; then test -d "$1/."; else - case $1 in #( + case $1 in -*)set "./$1";; esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' @@ -541,14 +569,161 @@ # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + +# Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} +case X$lt_ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac + +ECHO=${lt_ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then + # Yippee, $ECHO works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<_LT_EOF +$* +_LT_EOF + exit 0 +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +if test -z "$lt_ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if { echo_test_string=`eval $cmd`; } 2>/dev/null && + { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null + then + break + fi + done + fi + + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : + else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$ECHO" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + ECHO='print -r' + elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + ECHO='printf %s\n' + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + ECHO="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + ECHO=echo + fi + fi + fi + fi + fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +lt_ECHO=$ECHO +if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi -test -n "$DJDIR" || exec 7<&0 &1 + + + +exec 7<&0 &1 # Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` @@ -563,14 +738,14 @@ subdirs= MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='FastJet' PACKAGE_TARNAME='fastjet' -PACKAGE_VERSION='3.0.3' -PACKAGE_STRING='FastJet 3.0.3' +PACKAGE_VERSION='3.0.6' +PACKAGE_STRING='FastJet 3.0.6' PACKAGE_BUGREPORT='' -PACKAGE_URL='' ac_unique_file="src/JetDefinition.cc" # Factoring default headers for most tests. @@ -637,11 +812,9 @@ LIPO NMEDIT DSYMUTIL -MANIFEST_TOOL +lt_ECHO RANLIB -ac_ct_AR AR -DLLTOOL OBJDUMP NM ac_ct_DUMPBIN @@ -772,7 +945,6 @@ program_transform_name prefix exec_prefix -PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION @@ -809,7 +981,6 @@ with_pic enable_fast_install with_gnu_ld -with_sysroot enable_libtool_lock ' ac_precious_vars='build_alias @@ -889,9 +1060,8 @@ fi case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. @@ -936,7 +1106,8 @@ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -962,7 +1133,8 @@ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1166,7 +1338,8 @@ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1182,7 +1355,8 @@ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1212,17 +1386,17 @@ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" + -*) { $as_echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } eval $ac_envvar=\$ac_optarg export $ac_envvar ;; @@ -1231,7 +1405,7 @@ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac @@ -1239,13 +1413,15 @@ if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" + { $as_echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 + { (exit 1); exit 1; }; } ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi @@ -1268,7 +1444,8 @@ [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" + { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } done # There might be people who depend on the old broken behavior: `$host' @@ -1282,8 +1459,8 @@ if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used" >&2 + $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -1298,9 +1475,11 @@ ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" + { $as_echo "$as_me: error: working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" + { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } # Find the source files, if location was not specified. @@ -1339,11 +1518,13 @@ fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" + { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then @@ -1369,7 +1550,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures FastJet 3.0.3 to adapt to many kinds of systems. +\`configure' configures FastJet 3.0.6 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1383,7 +1564,7 @@ --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages + -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files @@ -1439,7 +1620,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of FastJet 3.0.3:";; + short | recursive ) echo "Configuration of FastJet 3.0.6:";; esac cat <<\_ACEOF @@ -1482,8 +1663,6 @@ --with-pic try to use only PIC/non-PIC objects [default=use both] --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-sysroot=DIR Search for dependent libraries within DIR - (or the compiler's sysroot if not specified). Some influential environment variables: CC C compiler command @@ -1491,7 +1670,7 @@ LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor CXX C++ compiler command @@ -1503,7 +1682,6 @@ Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. -Report bugs to the package provider. _ACEOF ac_status=$? fi @@ -1566,766 +1744,69 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -FastJet configure 3.0.3 -generated by GNU Autoconf 2.68 +FastJet configure 3.0.6 +generated by GNU Autoconf 2.63 -Copyright (C) 2010 Free Software Foundation, Inc. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval +It was created by FastJet $as_me 3.0.6, which was +generated by GNU Autoconf 2.63. Invocation command line was -} # ac_fn_c_try_compile + $ $0 $@ -# ac_fn_c_check_type LINENO TYPE VAR INCLUDES -# ------------------------------------------- -# Tests whether TYPE exists after having included INCLUDES, setting cache -# variable VAR accordingly. -ac_fn_c_check_type () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=no" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof ($2)) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof (($2))) - return 0; - ; - return 0; -} _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - eval "$3=yes" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_type - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () +exec 5>>config.log { - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` -} # ac_fn_c_try_cpp +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno +_ASUNAME -} # ac_fn_c_check_header_compile +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" +done +IFS=$as_save_IFS -# ac_fn_cxx_try_compile LINENO -# ---------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_cxx_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +} >&5 - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval +cat >&5 <<_ACEOF -} # ac_fn_cxx_try_compile -# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_c_check_header_mongrel () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval \${$3+:} false; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_header_compiler=yes -else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_mongrel - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_cxx_try_cpp LINENO -# ------------------------ -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_cxx_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_cxx_try_cpp - -# ac_fn_cxx_check_header_mongrel LINENO HEADER VAR INCLUDES -# --------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_cxx_check_header_mongrel () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval \${$3+:} false; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_header_compiler=yes -else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_cxx_check_header_mongrel - -# ac_fn_cxx_try_link LINENO -# ------------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_cxx_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_cxx_try_link - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func - -# ac_fn_fc_try_compile LINENO -# --------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_fc_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_fc_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_fc_try_compile - -# ac_fn_fc_try_link LINENO -# ------------------------ -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_fc_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_fc_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_fc_try_link -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by FastJet $as_me 3.0.3, which was -generated by GNU Autoconf 2.68. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## +## ----------- ## +## Core tests. ## +## ----------- ## _ACEOF @@ -2352,9 +1833,9 @@ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; 2) - as_fn_append ac_configure_args1 " '$ac_arg'" + ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else @@ -2370,13 +1851,13 @@ -* ) ac_must_keep_next=true ;; esac fi - as_fn_append ac_configure_args " '$ac_arg'" + ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac done done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there @@ -2388,9 +1869,11 @@ { echo - $as_echo "## ---------------- ## + cat <<\_ASBOX +## ---------------- ## ## Cache variables. ## -## ---------------- ##" +## ---------------- ## +_ASBOX echo # The following way of writing the cache mishandles newlines in values, ( @@ -2399,13 +1882,13 @@ case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; + *) $as_unset $ac_var ;; esac ;; esac done @@ -2424,9 +1907,11 @@ ) echo - $as_echo "## ----------------- ## + cat <<\_ASBOX +## ----------------- ## ## Output variables. ## -## ----------------- ##" +## ----------------- ## +_ASBOX echo for ac_var in $ac_subst_vars do @@ -2439,9 +1924,11 @@ echo if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## + cat <<\_ASBOX +## ------------------- ## ## File substitutions. ## -## ------------------- ##" +## ------------------- ## +_ASBOX echo for ac_var in $ac_subst_files do @@ -2455,9 +1942,11 @@ fi if test -s confdefs.h; then - $as_echo "## ----------- ## + cat <<\_ASBOX +## ----------- ## ## confdefs.h. ## -## ----------- ##" +## ----------- ## +_ASBOX echo cat confdefs.h echo @@ -2471,39 +1960,37 @@ exit $exit_status ' 0 for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h -$as_echo "/* confdefs.h */" > confdefs.h - # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF + cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF + cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF + cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF @@ -2512,12 +1999,7 @@ ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac + ac_site_file1=$CONFIG_SITE elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site @@ -2528,23 +2010,19 @@ for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 + if test -r "$ac_site_file"; then + { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } + . "$ac_site_file" fi done if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; @@ -2552,7 +2030,7 @@ esac fi else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 + { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi @@ -2567,11 +2045,11 @@ eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; @@ -2581,17 +2059,17 @@ ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 + { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 + { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 + { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 + { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac @@ -2603,20 +2081,43 @@ esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 + { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## + + + + + + + + + + + + + + + + + + + + + + + + ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -2645,7 +2146,9 @@ fi done if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 +$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } fi # These three variables are undocumented and unsupported, @@ -2671,10 +2174,10 @@ # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : +if test "${ac_cv_path_install+set}" = set; then $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -2682,11 +2185,11 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. @@ -2723,7 +2226,7 @@ ;; esac - done +done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir @@ -2739,7 +2242,7 @@ INSTALL=$ac_install_sh fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. @@ -2750,7 +2253,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 @@ -2761,11 +2264,15 @@ ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; + { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5 +$as_echo "$as_me: error: unsafe absolute working directory name" >&2;} + { (exit 1); exit 1; }; };; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; + { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5 +$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;} + { (exit 1); exit 1; }; };; esac # Do `set' in a subshell so we don't clobber the current shell's @@ -2787,8 +2294,11 @@ # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken -alias in your environment" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&5 +$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&2;} + { (exit 1); exit 1; }; } fi test "$2" = conftest.file @@ -2797,10 +2307,13 @@ # Ok. : else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! +Check your system clock" >&5 +$as_echo "$as_me: error: newly created file is older than distributed files! +Check your system clock" >&2;} + { (exit 1); exit 1; }; } fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +{ $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" @@ -2828,7 +2341,7 @@ am_missing_run="$MISSING --run " else am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 + { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi @@ -2849,9 +2362,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : +if test "${ac_cv_prog_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then @@ -2862,24 +2375,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 + { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -2889,9 +2402,9 @@ ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then @@ -2902,24 +2415,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -2928,7 +2441,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -2941,10 +2454,10 @@ fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : + if test "${ac_cv_path_mkdir+set}" = set; then $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -2952,7 +2465,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do + for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( @@ -2964,12 +2477,11 @@ esac done done - done +done IFS=$as_save_IFS fi - test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else @@ -2977,10 +2489,11 @@ # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. + test -d ./--version && rmdir ./--version MKDIR_P="$ac_install_sh -d" fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } mkdir_p="$MKDIR_P" @@ -2993,9 +2506,9 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : +if test "${ac_cv_prog_AWK+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then @@ -3006,24 +2519,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 + { $as_echo "$as_me:$LINENO: result: $AWK" >&5 $as_echo "$AWK" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -3031,11 +2544,11 @@ test -n "$AWK" && break done -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF @@ -3043,7 +2556,7 @@ all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; @@ -3053,11 +2566,11 @@ rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi @@ -3077,7 +2590,9 @@ am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } fi fi @@ -3093,7 +2608,7 @@ # Define the identity of the package. PACKAGE='fastjet' - VERSION='3.0.3' + VERSION='3.0.6' cat >>confdefs.h <<_ACEOF @@ -3128,7 +2643,7 @@ AMTAR=${AMTAR-"${am_missing_run}tar"} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a ustar tar archive" >&5 +{ $as_echo "$as_me:$LINENO: checking how to create a ustar tar archive" >&5 $as_echo_n "checking how to create a ustar tar archive... " >&6; } # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar plaintar pax cpio none' @@ -3201,13 +2716,13 @@ done rm -rf conftest.dir -if ${am_cv_prog_tar_ustar+:} false; then : +if test "${am_cv_prog_tar_ustar+set}" = set; then $as_echo_n "(cached) " >&6 else am_cv_prog_tar_ustar=$_am_tool fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_ustar" >&5 +{ $as_echo "$as_me:$LINENO: result: $am_cv_prog_tar_ustar" >&5 $as_echo "$am_cv_prog_tar_ustar" >&6; } @@ -3216,7 +2731,9 @@ if test "$prefix" = "$PWD"; then - as_fn_error $? "Installation into the build directory is not supported: use a different --prefix argument" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: Installation into the build directory is not supported: use a different --prefix argument" >&5 +$as_echo "$as_me: error: Installation into the build directory is not supported: use a different --prefix argument" >&2;} + { (exit 1); exit 1; }; } fi ac_config_headers="$ac_config_headers include/fastjet/config_raw.h:config.h.in" @@ -3239,7 +2756,7 @@ .PHONY: am__doit END # If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= @@ -3267,12 +2784,12 @@ fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : +if test "${enable_dependency_tracking+set}" = set; then enableval=$enable_dependency_tracking; fi @@ -3297,9 +2814,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -3310,24 +2827,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -3337,9 +2854,9 @@ ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then @@ -3350,24 +2867,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -3376,7 +2893,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -3390,9 +2907,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -3403,24 +2920,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -3430,9 +2947,9 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -3444,18 +2961,18 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then @@ -3474,10 +2991,10 @@ fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -3489,9 +3006,9 @@ do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -3502,24 +3019,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -3533,9 +3050,9 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then @@ -3546,24 +3063,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -3576,7 +3093,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -3587,37 +3104,57 @@ fi -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } +{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } # Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" +{ (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -3633,8 +3170,8 @@ # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } +{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: @@ -3650,17 +3187,17 @@ done rm -f $ac_rmfiles -if { { ac_try="$ac_link_default" +if { (ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 (eval "$ac_link_default") 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, @@ -3677,7 +3214,7 @@ # certainly right. break;; *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi @@ -3696,41 +3233,84 @@ else ac_file='' fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 + +{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +if test -z "$ac_file"; then + $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } +{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; }; } fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } + ac_exeext=$ac_cv_exeext +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } + fi + fi +fi +{ $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" +if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with @@ -3745,83 +3325,32 @@ esac done else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } +{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 + +rm -f conftest$ac_cv_exeext +{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : +if test "${ac_cv_objext+set}" = set; then $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -3833,17 +3362,17 @@ } _ACEOF rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in @@ -3856,23 +3385,31 @@ $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } +{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } fi + rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : +if test "${ac_cv_c_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -3886,16 +3423,37 @@ return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else - ac_compiler_gnu=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes @@ -3904,16 +3462,20 @@ fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : +if test "${ac_cv_prog_cc_g+set}" = set; then $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -3924,11 +3486,35 @@ return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -3939,12 +3525,36 @@ return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : else - ac_c_werror_flag=$ac_save_c_werror_flag + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -3955,17 +3565,42 @@ return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS @@ -3982,14 +3617,18 @@ CFLAGS= fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : +if test "${ac_cv_prog_cc_c89+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include @@ -4046,9 +3685,32 @@ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : + rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cc_c89=$ac_arg +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done @@ -4059,19 +3721,17 @@ # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 + { $as_echo "$as_me:$LINENO: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 + { $as_echo "$as_me:$LINENO: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac -if test "x$ac_cv_prog_cc_c89" != xno; then : -fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -4081,9 +3741,9 @@ depcc="$CC" am_compiler_list= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then @@ -4191,7 +3851,7 @@ fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type @@ -4212,14 +3872,14 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : + if test "${ac_cv_prog_CPP+set}" = set; then $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded @@ -4234,7 +3894,11 @@ # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include @@ -4243,34 +3907,78 @@ #endif Syntax error _ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.i conftest.$ac_ext + +rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then # Broken: success on invalid input. continue else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break fi -rm -f conftest.err conftest.i conftest.$ac_ext + +rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then break fi @@ -4282,7 +3990,7 @@ else ac_cv_prog_CPP=$CPP fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes @@ -4293,7 +4001,11 @@ # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include @@ -4302,40 +4014,87 @@ #endif Syntax error _ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.i conftest.$ac_ext + +rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then # Broken: success on invalid input. continue else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break fi -rm -f conftest.err conftest.i conftest.$ac_ext + +rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } +{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } fi ac_ext=c @@ -4345,9 +4104,9 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : +if test "${ac_cv_path_GREP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then @@ -4358,7 +4117,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do + for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue @@ -4378,7 +4137,7 @@ $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val + ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" @@ -4393,24 +4152,26 @@ $ac_path_GREP_found && break 3 done done - done +done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } fi else ac_cv_path_GREP=$GREP fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : +if test "${ac_cv_path_EGREP+set}" = set; then $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 @@ -4424,7 +4185,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do + for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue @@ -4444,7 +4205,7 @@ $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val + ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" @@ -4459,10 +4220,12 @@ $ac_path_EGREP_found && break 3 done done - done +done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } fi else ac_cv_path_EGREP=$EGREP @@ -4470,17 +4233,21 @@ fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : +if test "${ac_cv_header_stdc+set}" = set; then $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include @@ -4495,23 +4262,48 @@ return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else - ac_cv_header_stdc=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - + $EGREP "memchr" >/dev/null 2>&1; then + : else ac_cv_header_stdc=no fi @@ -4521,14 +4313,18 @@ if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - + $EGREP "free" >/dev/null 2>&1; then + : else ac_cv_header_stdc=no fi @@ -4538,10 +4334,14 @@ if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : + if test "$cross_compiling" = yes; then : else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include @@ -4568,33 +4368,118 @@ return 0; } _ACEOF -if ac_fn_c_try_run "$LINENO"; then : - +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : else - ac_cv_header_stdc=no + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi + fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then -$as_echo "#define STDC_HEADERS 1" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF @@ -4604,15 +4489,195 @@ done -ac_fn_c_check_type "$LINENO" "int" "ac_cv_type_int" "$ac_includes_default" -if test "x$ac_cv_type_int" = xyes; then : +{ $as_echo "$as_me:$LINENO: checking for int" >&5 +$as_echo_n "checking for int... " >&6; } +if test "${ac_cv_type_int+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_type_int=no +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if (sizeof (int)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if (sizeof ((int))) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_type_int=yes +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5 +$as_echo "$ac_cv_type_int" >&6; } + +{ $as_echo "$as_me:$LINENO: checking for long" >&5 +$as_echo_n "checking for long... " >&6; } +if test "${ac_cv_type_long+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_type_long=no +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if (sizeof (long)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if (sizeof ((long))) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_long=yes fi -ac_fn_c_check_type "$LINENO" "long" "ac_cv_type_long" "$ac_includes_default" -if test "x$ac_cv_type_long" = xyes; then : +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5 +$as_echo "$ac_cv_type_long" >&6; } USE_CUSTOM_FLAGS="yes" @@ -4637,9 +4702,9 @@ do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CXX+:} false; then : +if test "${ac_cv_prog_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then @@ -4650,24 +4715,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 + { $as_echo "$as_me:$LINENO: result: $CXX" >&5 $as_echo "$CXX" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -4681,9 +4746,9 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CXX+:} false; then : +if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CXX"; then @@ -4694,24 +4759,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CXX="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 $as_echo "$ac_ct_CXX" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -4724,7 +4789,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -4735,36 +4800,53 @@ fi fi # Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 +$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5 set X $ac_compile ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" +{ (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } -if ${ac_cv_cxx_compiler_gnu+:} false; then : +if test "${ac_cv_cxx_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -4778,16 +4860,37 @@ return 0; } _ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else - ac_compiler_gnu=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 $as_echo "$ac_cv_cxx_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GXX=yes @@ -4796,16 +4899,20 @@ fi ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 +{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 $as_echo_n "checking whether $CXX accepts -g... " >&6; } -if ${ac_cv_prog_cxx_g+:} false; then : +if test "${ac_cv_prog_cxx_g+set}" = set; then $as_echo_n "(cached) " >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -4816,11 +4923,35 @@ return 0; } _ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes else - CXXFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CXXFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -4831,12 +4962,36 @@ return 0; } _ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : else - ac_cxx_werror_flag=$ac_save_cxx_werror_flag + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -4847,17 +5002,42 @@ return 0; } _ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 $as_echo "$ac_cv_prog_cxx_g" >&6; } if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS @@ -4882,9 +5062,9 @@ depcc="$CXX" am_compiler_list= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CXX_dependencies_compiler_type+:} false; then : +if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then @@ -4992,7 +5172,7 @@ fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 +{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type @@ -5012,9 +5192,9 @@ cxx_dirname=$(dirname $CXX) # Extract the first word of "$cxx_progname", so it can be a program name with args. set dummy $cxx_progname; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_cxx_found+:} false; then : +if test "${ac_cv_prog_cxx_found+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$cxx_found"; then @@ -5025,14 +5205,14 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_cxx_found="yes" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS test -z "$ac_cv_prog_cxx_found" && ac_cv_prog_cxx_found="no.$cxx_dirname$PATH_SEPARATOR$PATH" @@ -5040,50 +5220,144 @@ fi cxx_found=$ac_cv_prog_cxx_found if test -n "$cxx_found"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cxx_found" >&5 + { $as_echo "$as_me:$LINENO: result: $cxx_found" >&5 $as_echo "$cxx_found" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$cxx_found" == "xno"; then - as_fn_error $? "No functional C++ compiler found" "$LINENO" 5 -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } + { { $as_echo "$as_me:$LINENO: error: No functional C++ compiler found" >&5 +$as_echo "$as_me: error: No functional C++ compiler found" >&2;} + { (exit 1); exit 1; }; } fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if ${ac_cv_path_SED+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + +done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + +{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if test "${ac_cv_path_SED+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + $as_unset ac_script || ac_script= + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do + for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue @@ -5103,7 +5377,7 @@ $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val + ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" @@ -5118,26 +5392,28 @@ $ac_path_SED_found && break 3 done done - done +done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;} + { (exit 1); exit 1; }; } fi else ac_cv_path_SED=$SED fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF @@ -5145,7 +5421,7 @@ all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; @@ -5155,11 +5431,11 @@ rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi @@ -5167,12 +5443,16 @@ AM_CXXFLAGS="" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : +if test "${ac_cv_header_stdc+set}" = set; then $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include @@ -5187,23 +5467,48 @@ return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else - ac_cv_header_stdc=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - + $EGREP "memchr" >/dev/null 2>&1; then + : else ac_cv_header_stdc=no fi @@ -5213,14 +5518,18 @@ if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - + $EGREP "free" >/dev/null 2>&1; then + : else ac_cv_header_stdc=no fi @@ -5230,10 +5539,14 @@ if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : + if test "$cross_compiling" = yes; then : else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include @@ -5260,22 +5573,51 @@ return 0; } _ACEOF -if ac_fn_c_try_run "$LINENO"; then : - +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : else - ac_cv_header_stdc=no + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi + fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then -$as_echo "#define STDC_HEADERS 1" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF fi @@ -5289,7 +5631,7 @@ CONFIG_LIBS_PLUGINS_STATIC="" # Check whether --enable-debug was given. -if test "${enable_debug+set}" = set; then : +if test "${enable_debug+set}" = set; then enableval=$enable_debug; ENABLE_DEBUG_FLAG="$enableval" else ENABLE_DEBUG_FLAG="yes" @@ -5298,7 +5640,7 @@ if [ "$ENABLE_DEBUG_FLAG" == "yes" ] ; then AM_CXXFLAGS=${AM_CXXFLAGS}" -g " - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CXX supports -Woverloaded-virtual flag" >&5 + { $as_echo "$as_me:$LINENO: checking if $CXX supports -Woverloaded-virtual flag" >&5 $as_echo_n "checking if $CXX supports -Woverloaded-virtual flag... " >&6; } SAVE_CXXFLAGS="$CXXFLAGS" CXXFLAGS="-Woverloaded-virtual" @@ -5309,15 +5651,40 @@ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main(void){ return 0;} _ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_overloaded_virtual_ok=yes else - ac_overloaded_virtual_ok=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_overloaded_virtual_ok=no fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -5326,7 +5693,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu CXXFLAGS="$SAVE_CXXFLAGS" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_overloaded_virtual_ok" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_overloaded_virtual_ok" >&5 $as_echo "$ac_overloaded_virtual_ok" >&6; } if [ "x${ac_overloaded_virtual_ok}" == "xyes" ]; then AM_CXXFLAGS=${AM_CXXFLAGS}" -Woverloaded-virtual " @@ -5334,7 +5701,7 @@ fi # Check whether --enable-extra-warnings was given. -if test "${enable_extra_warnings+set}" = set; then : +if test "${enable_extra_warnings+set}" = set; then enableval=$enable_extra_warnings; ENABLE_EXTRA_WARNINGS_FLAG="$enableval" else ENABLE_EXTRA_WARNINGS_FLAG="no" @@ -5345,7 +5712,7 @@ fi # Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then : +if test "${enable_shared+set}" = set; then enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; @@ -5377,12 +5744,146 @@ HAS_SHARED=${enable_shared} + for ac_header in execinfo.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "execinfo.h" "ac_cv_header_execinfo_h" "$ac_includes_default" -if test "x$ac_cv_header_execinfo_h" = xyes; then : +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +$as_echo_n "checking $ac_header usability... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +$as_echo_n "checking $ac_header presence... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + + ;; +esac +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + +fi +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then cat >>confdefs.h <<_ACEOF -#define HAVE_EXECINFO_H 1 +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi @@ -5390,14 +5891,19 @@ done -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5 + +{ $as_echo "$as_me:$LINENO: checking for cos in -lm" >&5 $as_echo_n "checking for cos in -lm... " >&6; } -if ${ac_cv_lib_m_cos+:} false; then : +if test "${ac_cv_lib_m_cos+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lm $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -5415,18 +5921,43 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_m_cos=yes else - ac_cv_lib_m_cos=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_m_cos=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_m_cos" >&5 $as_echo "$ac_cv_lib_m_cos" >&6; } -if test "x$ac_cv_lib_m_cos" = xyes; then : +if test "x$ac_cv_lib_m_cos" = x""yes; then cat >>confdefs.h <<_ACEOF #define HAVE_LIBM 1 _ACEOF @@ -5442,7 +5973,7 @@ CGAL_LIBS="" # Check whether --enable-cgal was given. -if test "${enable_cgal+set}" = set; then : +if test "${enable_cgal+set}" = set; then enableval=$enable_cgal; ENABLE_CGAL_FLAG="$enableval" else ENABLE_CGAL_FLAG="no" @@ -5454,10 +5985,10 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 +{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 $as_echo_n "checking how to run the C++ preprocessor... " >&6; } if test -z "$CXXCPP"; then - if ${ac_cv_prog_CXXCPP+:} false; then : + if test "${ac_cv_prog_CXXCPP+set}" = set; then $as_echo_n "(cached) " >&6 else # Double quotes because CXXCPP needs to be expanded @@ -5472,7 +6003,11 @@ # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include @@ -5481,34 +6016,78 @@ #endif Syntax error _ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + : else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.i conftest.$ac_ext + +rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then # Broken: success on invalid input. continue else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break fi -rm -f conftest.err conftest.i conftest.$ac_ext + +rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then break fi @@ -5520,7 +6099,7 @@ else ac_cv_prog_CXXCPP=$CXXCPP fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 +{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5 $as_echo "$CXXCPP" >&6; } ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes @@ -5531,7 +6110,11 @@ # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include @@ -5540,40 +6123,87 @@ #endif Syntax error _ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + : else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.i conftest.$ac_ext + +rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then # Broken: success on invalid input. continue else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break fi -rm -f conftest.err conftest.i conftest.$ac_ext + +rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } +{ { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } fi ac_ext=cpp @@ -5588,14 +6218,14 @@ acx_cgal_default_makefile=no # Check whether --with-cgalmakefile was given. -if test "${with_cgalmakefile+set}" = set; then : +if test "${with_cgalmakefile+set}" = set; then withval=$with_cgalmakefile; fi # Check whether --with-cgaldir was given. -if test "${with_cgaldir+set}" = set; then : +if test "${with_cgaldir+set}" = set; then withval=$with_cgaldir; fi @@ -5618,7 +6248,7 @@ esac if test "$acx_cgal_found" == no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking CGAL_MAKEFILE" >&5 + { $as_echo "$as_me:$LINENO: checking CGAL_MAKEFILE" >&5 $as_echo_n "checking CGAL_MAKEFILE... " >&6; } if test \! -z "$CGAL_MAKEFILE"; then @@ -5651,18 +6281,20 @@ done rm -f $tname - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } acx_cgal_found=yes else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: inexistent" >&5 + { $as_echo "$as_me:$LINENO: result: inexistent" >&5 $as_echo "inexistent" >&6; } if test "$acx_cgal_default_makefile" == no; then - as_fn_error $? "CGAL_MAKEFILE defined as $CGAL_MAKEFILE, but the makefile does not exist." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: CGAL_MAKEFILE defined as $CGAL_MAKEFILE, but the makefile does not exist." >&5 +$as_echo "$as_me: error: CGAL_MAKEFILE defined as $CGAL_MAKEFILE, but the makefile does not exist." >&2;} + { (exit 1); exit 1; }; } fi fi else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: not specified" >&5 + { $as_echo "$as_me:$LINENO: result: not specified" >&5 $as_echo "not specified" >&6; } fi fi @@ -5676,15 +6308,19 @@ ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C++ compiler accepts -frounding-math" >&5 + { $as_echo "$as_me:$LINENO: checking whether C++ compiler accepts -frounding-math" >&5 $as_echo_n "checking whether C++ compiler accepts -frounding-math... " >&6; } -if ${ax_cv_cxx_flags__frounding_math+:} false; then : +if test "${ax_cv_cxx_flags__frounding_math+set}" = set; then $as_echo_n "(cached) " >&6 else ax_save_FLAGS=$CXXFLAGS CXXFLAGS="-frounding-math" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -5695,17 +6331,38 @@ return 0; } _ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ax_cv_cxx_flags__frounding_math=yes else - ax_cv_cxx_flags__frounding_math=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ax_cv_cxx_flags__frounding_math=no fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext CXXFLAGS=$ax_save_FLAGS fi eval ax_check_compiler_flags=$ax_cv_cxx_flags__frounding_math -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_check_compiler_flags" >&5 +{ $as_echo "$as_me:$LINENO: result: $ax_check_compiler_flags" >&5 $as_echo "$ax_check_compiler_flags" >&6; } if test "x$ax_check_compiler_flags" = xyes; then ADDITIONAL_CGAL_FLAGS=${ADDITIONAL_CGAL_FLAGS}" -frounding-math" @@ -5732,7 +6389,7 @@ CGAL_LIBS="" if test \! -z "$with_cgaldir"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking CGAL in ${with_cgaldir}" >&5 + { $as_echo "$as_me:$LINENO: checking CGAL in ${with_cgaldir}" >&5 $as_echo_n "checking CGAL in ${with_cgaldir}... " >&6; } LDFLAGS="${LDFLAGS} -L${with_cgaldir}/lib -Wl,-rpath,${with_cgaldir}/lib" CXXFLAGS="${CXXFLAGS} -I${with_cgaldir}/include $ADDITIONAL_CGAL_FLAGS" @@ -5752,8 +6409,134 @@ ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - ac_fn_cxx_check_header_mongrel "$LINENO" "CGAL/Exact_predicates_inexact_constructions_kernel.h" "ac_cv_header_CGAL_Exact_predicates_inexact_constructions_kernel_h" "$ac_includes_default" -if test "x$ac_cv_header_CGAL_Exact_predicates_inexact_constructions_kernel_h" = xyes; then : + if test "${ac_cv_header_CGAL_Exact_predicates_inexact_constructions_kernel_h+set}" = set; then + { $as_echo "$as_me:$LINENO: checking for CGAL/Exact_predicates_inexact_constructions_kernel.h" >&5 +$as_echo_n "checking for CGAL/Exact_predicates_inexact_constructions_kernel.h... " >&6; } +if test "${ac_cv_header_CGAL_Exact_predicates_inexact_constructions_kernel_h+set}" = set; then + $as_echo_n "(cached) " >&6 +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_CGAL_Exact_predicates_inexact_constructions_kernel_h" >&5 +$as_echo "$ac_cv_header_CGAL_Exact_predicates_inexact_constructions_kernel_h" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:$LINENO: checking CGAL/Exact_predicates_inexact_constructions_kernel.h usability" >&5 +$as_echo_n "checking CGAL/Exact_predicates_inexact_constructions_kernel.h usability... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:$LINENO: checking CGAL/Exact_predicates_inexact_constructions_kernel.h presence" >&5 +$as_echo_n "checking CGAL/Exact_predicates_inexact_constructions_kernel.h presence... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in + yes:no: ) + { $as_echo "$as_me:$LINENO: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { $as_echo "$as_me:$LINENO: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: present but cannot be compiled" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: proceeding with the preprocessor's result" >&5 +$as_echo "$as_me: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: proceeding with the preprocessor's result" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: in the future, the compiler will take precedence" >&5 +$as_echo "$as_me: WARNING: CGAL/Exact_predicates_inexact_constructions_kernel.h: in the future, the compiler will take precedence" >&2;} + + ;; +esac +{ $as_echo "$as_me:$LINENO: checking for CGAL/Exact_predicates_inexact_constructions_kernel.h" >&5 +$as_echo_n "checking for CGAL/Exact_predicates_inexact_constructions_kernel.h... " >&6; } +if test "${ac_cv_header_CGAL_Exact_predicates_inexact_constructions_kernel_h+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_header_CGAL_Exact_predicates_inexact_constructions_kernel_h=$ac_header_preproc +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_CGAL_Exact_predicates_inexact_constructions_kernel_h" >&5 +$as_echo "$ac_cv_header_CGAL_Exact_predicates_inexact_constructions_kernel_h" >&6; } + +fi +if test "x$ac_cv_header_CGAL_Exact_predicates_inexact_constructions_kernel_h" = x""yes; then cgal_have_header=yes else cgal_have_header=no @@ -5776,14 +6559,18 @@ ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lCGAL" >&5 + { $as_echo "$as_me:$LINENO: checking for main in -lCGAL" >&5 $as_echo_n "checking for main in -lCGAL... " >&6; } -if ${ac_cv_lib_CGAL_main+:} false; then : +if test "${ac_cv_lib_CGAL_main+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lCGAL $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ @@ -5795,18 +6582,43 @@ return 0; } _ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_CGAL_main=yes else - ac_cv_lib_CGAL_main=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_CGAL_main=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_CGAL_main" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_CGAL_main" >&5 $as_echo "$ac_cv_lib_CGAL_main" >&6; } -if test "x$ac_cv_lib_CGAL_main" = xyes; then : +if test "x$ac_cv_lib_CGAL_main" = x""yes; then cgal_have_lib=yes else cgal_have_lib=no @@ -5820,6 +6632,195 @@ if test "$cgal_have_lib" == yes; then CGAL_LIBS=${CGAL_LIBS}" -lCGAL" + { $as_echo "$as_me:$LINENO: checking for main in -lmpfr" >&5 +$as_echo_n "checking for main in -lmpfr... " >&6; } +if test "${ac_cv_lib_mpfr_main+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lmpfr $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main () +{ +return main (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_mpfr_main=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_mpfr_main=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_mpfr_main" >&5 +$as_echo "$ac_cv_lib_mpfr_main" >&6; } +if test "x$ac_cv_lib_mpfr_main" = x""yes; then + CGAL_LIBS="$CGAL_LIBS -lmpfr" +fi + + { $as_echo "$as_me:$LINENO: checking for main in -lgmp" >&5 +$as_echo_n "checking for main in -lgmp... " >&6; } +if test "${ac_cv_lib_gmp_main+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lgmp $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main () +{ +return main (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_gmp_main=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_gmp_main=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_gmp_main" >&5 +$as_echo "$ac_cv_lib_gmp_main" >&6; } +if test "x$ac_cv_lib_gmp_main" = x""yes; then + CGAL_LIBS="$CGAL_LIBS -lgmp" +fi + + { $as_echo "$as_me:$LINENO: checking for main in -lgmpxx" >&5 +$as_echo_n "checking for main in -lgmpxx... " >&6; } +if test "${ac_cv_lib_gmpxx_main+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lgmpxx $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main () +{ +return main (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_gmpxx_main=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_gmpxx_main=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_gmpxx_main" >&5 +$as_echo "$ac_cv_lib_gmpxx_main" >&6; } +if test "x$ac_cv_lib_gmpxx_main" = x""yes; then + CGAL_LIBS="$CGAL_LIBS -lgmpxx" +fi + acx_cgal_found=yes fi @@ -5838,16 +6839,18 @@ fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking CGAL" >&5 +{ $as_echo "$as_me:$LINENO: checking CGAL" >&5 $as_echo_n "checking CGAL... " >&6; } if test "$acx_cgal_found" == yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; }; else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; }; - as_fn_error $? "CGAL explicitly requested and not found or not functional" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: CGAL explicitly requested and not found or not functional" >&5 +$as_echo "$as_me: error: CGAL explicitly requested and not found or not functional" >&2;} + { (exit 1); exit 1; }; } fi fi @@ -5860,7 +6863,7 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CXX supports -Wl,--enable-new-dtags flag" >&5 +{ $as_echo "$as_me:$LINENO: checking if $CXX supports -Wl,--enable-new-dtags flag" >&5 $as_echo_n "checking if $CXX supports -Wl,--enable-new-dtags flag... " >&6; } SAVE_CXXFLAGS="$CXXFLAGS" CXXFLAGS="-Werror -Wl,--enable-new-dtags" @@ -5870,17 +6873,46 @@ ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main(void){ return 0;} _ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_enable_new_dtags_ok=yes else - ac_enable_new_dtags_ok=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_enable_new_dtags_ok=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -5888,7 +6920,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu CXXFLAGS="$SAVE_CXXFLAGS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_enable_new_dtags_ok" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_enable_new_dtags_ok" >&5 $as_echo "$ac_enable_new_dtags_ok" >&6; } HAS_RUNPATH_SUPPORT="no" CONFIG_RUNPATH_FLAGS="" @@ -5937,10 +6969,22 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build all plugins" >&5 -$as_echo_n "checking whether to build all plugins... " >&6; } - # Check whether --enable-allplugins was given. -if test "${enable_allplugins+set}" = set; then : + + + + + + + + + + + + + { $as_echo "$as_me:$LINENO: checking whether to build all plugins" >&5 +$as_echo_n "checking whether to build all plugins... " >&6; } + # Check whether --enable-allplugins was given. +if test "${enable_allplugins+set}" = set; then enableval=$enable_allplugins; ENABLE_ALLPLUGINS="$enableval" else ENABLE_ALLPLUGINS="not set" @@ -5974,14 +7018,14 @@ DEFAULT_ENABLE_D0RUNICONE="no" DEFAULT_ENABLE_GRIDJET="no" fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_ALLPLUGINS" >&5 + { $as_echo "$as_me:$LINENO: result: $ENABLE_ALLPLUGINS" >&5 $as_echo "$ENABLE_ALLPLUGINS" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build all CXX plugins" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build all CXX plugins" >&5 $as_echo_n "checking whether to build all CXX plugins... " >&6; } # Check whether --enable-allcxxplugins was given. -if test "${enable_allcxxplugins+set}" = set; then : +if test "${enable_allcxxplugins+set}" = set; then enableval=$enable_allcxxplugins; ENABLE_ALLCXXPLUGINS="$enableval" else ENABLE_ALLCXXPLUGINS="not set" @@ -6013,18 +7057,20 @@ DEFAULT_ENABLE_D0RUNICONE="no" DEFAULT_ENABLE_GRIDJET="no" fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_ALLCXXPLUGINS" >&5 + { $as_echo "$as_me:$LINENO: result: $ENABLE_ALLCXXPLUGINS" >&5 $as_echo "$ENABLE_ALLCXXPLUGINS" >&6; } LIST_ALL_PLUGINS="" # Check whether --enable-monolithic was given. -if test "${enable_monolithic+set}" = set; then : +if test "${enable_monolithic+set}" = set; then enableval=$enable_monolithic; case "${enableval}" in yes) monolithic=yes ;; no) monolithic=no ;; - *) as_fn_error $? "bad value ${enableval} for --enable-monolithic" "$LINENO" 5 ;; + *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-monolithic" >&5 +$as_echo "$as_me: error: bad value ${enableval} for --enable-monolithic" >&2;} + { (exit 1); exit 1; }; } ;; esac else monolithic=yes @@ -6044,11 +7090,11 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build plugin SISCone" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build plugin SISCone" >&5 $as_echo_n "checking whether to build plugin SISCone... " >&6; } # Check whether --enable-siscone was given. -if test "${enable_siscone+set}" = set; then : +if test "${enable_siscone+set}" = set; then enableval=$enable_siscone; ENABLE_SISCONE="$enableval" else ENABLE_SISCONE="${DEFAULT_ENABLE_SISCONE}" @@ -6056,7 +7102,9 @@ if [ "x$ENABLE_SISCONE" == "xyes" ] ; then -$as_echo "#define ENABLE_PLUGIN_SISCONE /**/" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define ENABLE_PLUGIN_SISCONE /**/ +_ACEOF if [ "x$monolithic" != "xyes" ] ; then CONFIG_LIBS_PLUGINS=${CONFIG_LIBS_PLUGINS}" -lSISConePlugin " @@ -6082,7 +7130,7 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ENABLE_SISCONE}" >&5 + { $as_echo "$as_me:$LINENO: result: ${ENABLE_SISCONE}" >&5 $as_echo "${ENABLE_SISCONE}" >&6; } @@ -6091,11 +7139,11 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build plugin CDFCones" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build plugin CDFCones" >&5 $as_echo_n "checking whether to build plugin CDFCones... " >&6; } # Check whether --enable-cdfcones was given. -if test "${enable_cdfcones+set}" = set; then : +if test "${enable_cdfcones+set}" = set; then enableval=$enable_cdfcones; ENABLE_CDFCONES="$enableval" else ENABLE_CDFCONES="${DEFAULT_ENABLE_CDFCONES}" @@ -6103,7 +7151,9 @@ if [ "x$ENABLE_CDFCONES" == "xyes" ] ; then -$as_echo "#define ENABLE_PLUGIN_CDFCONES /**/" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define ENABLE_PLUGIN_CDFCONES /**/ +_ACEOF if [ "x$monolithic" != "xyes" ] ; then CONFIG_LIBS_PLUGINS=${CONFIG_LIBS_PLUGINS}" -lCDFConesPlugin " @@ -6128,18 +7178,18 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ENABLE_CDFCONES}" >&5 + { $as_echo "$as_me:$LINENO: result: ${ENABLE_CDFCONES}" >&5 $as_echo "${ENABLE_CDFCONES}" >&6; } ac_config_files="$ac_config_files plugins/CDFCones/CDFcode/Makefile" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build plugin PxCone" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build plugin PxCone" >&5 $as_echo_n "checking whether to build plugin PxCone... " >&6; } # Check whether --enable-pxcone was given. -if test "${enable_pxcone+set}" = set; then : +if test "${enable_pxcone+set}" = set; then enableval=$enable_pxcone; ENABLE_PXCONE="$enableval" else ENABLE_PXCONE="${DEFAULT_ENABLE_PXCONE}" @@ -6147,7 +7197,9 @@ if [ "x$ENABLE_PXCONE" == "xyes" ] ; then -$as_echo "#define ENABLE_PLUGIN_PXCONE /**/" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define ENABLE_PLUGIN_PXCONE /**/ +_ACEOF if [ "x$monolithic" != "xyes" ] ; then CONFIG_LIBS_PLUGINS=${CONFIG_LIBS_PLUGINS}" -lPxConePlugin " @@ -6172,16 +7224,16 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ENABLE_PXCONE}" >&5 + { $as_echo "$as_me:$LINENO: result: ${ENABLE_PXCONE}" >&5 $as_echo "${ENABLE_PXCONE}" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build plugin D0RunIICone" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build plugin D0RunIICone" >&5 $as_echo_n "checking whether to build plugin D0RunIICone... " >&6; } # Check whether --enable-d0runiicone was given. -if test "${enable_d0runiicone+set}" = set; then : +if test "${enable_d0runiicone+set}" = set; then enableval=$enable_d0runiicone; ENABLE_D0RUNIICONE="$enableval" else ENABLE_D0RUNIICONE="${DEFAULT_ENABLE_D0RUNIICONE}" @@ -6189,7 +7241,9 @@ if [ "x$ENABLE_D0RUNIICONE" == "xyes" ] ; then -$as_echo "#define ENABLE_PLUGIN_D0RUNIICONE /**/" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define ENABLE_PLUGIN_D0RUNIICONE /**/ +_ACEOF if [ "x$monolithic" != "xyes" ] ; then CONFIG_LIBS_PLUGINS=${CONFIG_LIBS_PLUGINS}" -lD0RunIIConePlugin " @@ -6214,16 +7268,16 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ENABLE_D0RUNIICONE}" >&5 + { $as_echo "$as_me:$LINENO: result: ${ENABLE_D0RUNIICONE}" >&5 $as_echo "${ENABLE_D0RUNIICONE}" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build plugin NestedDefs" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build plugin NestedDefs" >&5 $as_echo_n "checking whether to build plugin NestedDefs... " >&6; } # Check whether --enable-nesteddefs was given. -if test "${enable_nesteddefs+set}" = set; then : +if test "${enable_nesteddefs+set}" = set; then enableval=$enable_nesteddefs; ENABLE_NESTEDDEFS="$enableval" else ENABLE_NESTEDDEFS="${DEFAULT_ENABLE_NESTEDDEFS}" @@ -6231,7 +7285,9 @@ if [ "x$ENABLE_NESTEDDEFS" == "xyes" ] ; then -$as_echo "#define ENABLE_PLUGIN_NESTEDDEFS /**/" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define ENABLE_PLUGIN_NESTEDDEFS /**/ +_ACEOF if [ "x$monolithic" != "xyes" ] ; then CONFIG_LIBS_PLUGINS=${CONFIG_LIBS_PLUGINS}" -lNestedDefsPlugin " @@ -6256,16 +7312,16 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ENABLE_NESTEDDEFS}" >&5 + { $as_echo "$as_me:$LINENO: result: ${ENABLE_NESTEDDEFS}" >&5 $as_echo "${ENABLE_NESTEDDEFS}" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build plugin TrackJet" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build plugin TrackJet" >&5 $as_echo_n "checking whether to build plugin TrackJet... " >&6; } # Check whether --enable-trackjet was given. -if test "${enable_trackjet+set}" = set; then : +if test "${enable_trackjet+set}" = set; then enableval=$enable_trackjet; ENABLE_TRACKJET="$enableval" else ENABLE_TRACKJET="${DEFAULT_ENABLE_TRACKJET}" @@ -6273,7 +7329,9 @@ if [ "x$ENABLE_TRACKJET" == "xyes" ] ; then -$as_echo "#define ENABLE_PLUGIN_TRACKJET /**/" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define ENABLE_PLUGIN_TRACKJET /**/ +_ACEOF if [ "x$monolithic" != "xyes" ] ; then CONFIG_LIBS_PLUGINS=${CONFIG_LIBS_PLUGINS}" -lTrackJetPlugin " @@ -6298,16 +7356,16 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ENABLE_TRACKJET}" >&5 + { $as_echo "$as_me:$LINENO: result: ${ENABLE_TRACKJET}" >&5 $as_echo "${ENABLE_TRACKJET}" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build plugin ATLASCone" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build plugin ATLASCone" >&5 $as_echo_n "checking whether to build plugin ATLASCone... " >&6; } # Check whether --enable-atlascone was given. -if test "${enable_atlascone+set}" = set; then : +if test "${enable_atlascone+set}" = set; then enableval=$enable_atlascone; ENABLE_ATLASCONE="$enableval" else ENABLE_ATLASCONE="${DEFAULT_ENABLE_ATLASCONE}" @@ -6315,7 +7373,9 @@ if [ "x$ENABLE_ATLASCONE" == "xyes" ] ; then -$as_echo "#define ENABLE_PLUGIN_ATLASCONE /**/" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define ENABLE_PLUGIN_ATLASCONE /**/ +_ACEOF if [ "x$monolithic" != "xyes" ] ; then CONFIG_LIBS_PLUGINS=${CONFIG_LIBS_PLUGINS}" -lATLASConePlugin " @@ -6340,16 +7400,16 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ENABLE_ATLASCONE}" >&5 + { $as_echo "$as_me:$LINENO: result: ${ENABLE_ATLASCONE}" >&5 $as_echo "${ENABLE_ATLASCONE}" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build plugin CMSIterativeCone" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build plugin CMSIterativeCone" >&5 $as_echo_n "checking whether to build plugin CMSIterativeCone... " >&6; } # Check whether --enable-cmsiterativecone was given. -if test "${enable_cmsiterativecone+set}" = set; then : +if test "${enable_cmsiterativecone+set}" = set; then enableval=$enable_cmsiterativecone; ENABLE_CMSITERATIVECONE="$enableval" else ENABLE_CMSITERATIVECONE="${DEFAULT_ENABLE_CMSITERATIVECONE}" @@ -6357,7 +7417,9 @@ if [ "x$ENABLE_CMSITERATIVECONE" == "xyes" ] ; then -$as_echo "#define ENABLE_PLUGIN_CMSITERATIVECONE /**/" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define ENABLE_PLUGIN_CMSITERATIVECONE /**/ +_ACEOF if [ "x$monolithic" != "xyes" ] ; then CONFIG_LIBS_PLUGINS=${CONFIG_LIBS_PLUGINS}" -lCMSIterativeConePlugin " @@ -6382,16 +7444,16 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ENABLE_CMSITERATIVECONE}" >&5 + { $as_echo "$as_me:$LINENO: result: ${ENABLE_CMSITERATIVECONE}" >&5 $as_echo "${ENABLE_CMSITERATIVECONE}" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build plugin EECambridge" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build plugin EECambridge" >&5 $as_echo_n "checking whether to build plugin EECambridge... " >&6; } # Check whether --enable-eecambridge was given. -if test "${enable_eecambridge+set}" = set; then : +if test "${enable_eecambridge+set}" = set; then enableval=$enable_eecambridge; ENABLE_EECAMBRIDGE="$enableval" else ENABLE_EECAMBRIDGE="${DEFAULT_ENABLE_EECAMBRIDGE}" @@ -6399,7 +7461,9 @@ if [ "x$ENABLE_EECAMBRIDGE" == "xyes" ] ; then -$as_echo "#define ENABLE_PLUGIN_EECAMBRIDGE /**/" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define ENABLE_PLUGIN_EECAMBRIDGE /**/ +_ACEOF if [ "x$monolithic" != "xyes" ] ; then CONFIG_LIBS_PLUGINS=${CONFIG_LIBS_PLUGINS}" -lEECambridgePlugin " @@ -6424,16 +7488,16 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ENABLE_EECAMBRIDGE}" >&5 + { $as_echo "$as_me:$LINENO: result: ${ENABLE_EECAMBRIDGE}" >&5 $as_echo "${ENABLE_EECAMBRIDGE}" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build plugin Jade" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build plugin Jade" >&5 $as_echo_n "checking whether to build plugin Jade... " >&6; } # Check whether --enable-jade was given. -if test "${enable_jade+set}" = set; then : +if test "${enable_jade+set}" = set; then enableval=$enable_jade; ENABLE_JADE="$enableval" else ENABLE_JADE="${DEFAULT_ENABLE_JADE}" @@ -6441,7 +7505,9 @@ if [ "x$ENABLE_JADE" == "xyes" ] ; then -$as_echo "#define ENABLE_PLUGIN_JADE /**/" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define ENABLE_PLUGIN_JADE /**/ +_ACEOF if [ "x$monolithic" != "xyes" ] ; then CONFIG_LIBS_PLUGINS=${CONFIG_LIBS_PLUGINS}" -lJadePlugin " @@ -6466,16 +7532,16 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ENABLE_JADE}" >&5 + { $as_echo "$as_me:$LINENO: result: ${ENABLE_JADE}" >&5 $as_echo "${ENABLE_JADE}" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build plugin D0RunICone" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build plugin D0RunICone" >&5 $as_echo_n "checking whether to build plugin D0RunICone... " >&6; } # Check whether --enable-d0runicone was given. -if test "${enable_d0runicone+set}" = set; then : +if test "${enable_d0runicone+set}" = set; then enableval=$enable_d0runicone; ENABLE_D0RUNICONE="$enableval" else ENABLE_D0RUNICONE="${DEFAULT_ENABLE_D0RUNICONE}" @@ -6483,7 +7549,9 @@ if [ "x$ENABLE_D0RUNICONE" == "xyes" ] ; then -$as_echo "#define ENABLE_PLUGIN_D0RUNICONE /**/" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define ENABLE_PLUGIN_D0RUNICONE /**/ +_ACEOF if [ "x$monolithic" != "xyes" ] ; then CONFIG_LIBS_PLUGINS=${CONFIG_LIBS_PLUGINS}" -lD0RunIConePlugin " @@ -6508,16 +7576,16 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ENABLE_D0RUNICONE}" >&5 + { $as_echo "$as_me:$LINENO: result: ${ENABLE_D0RUNICONE}" >&5 $as_echo "${ENABLE_D0RUNICONE}" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build plugin GridJet" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build plugin GridJet" >&5 $as_echo_n "checking whether to build plugin GridJet... " >&6; } # Check whether --enable-gridjet was given. -if test "${enable_gridjet+set}" = set; then : +if test "${enable_gridjet+set}" = set; then enableval=$enable_gridjet; ENABLE_GRIDJET="$enableval" else ENABLE_GRIDJET="${DEFAULT_ENABLE_GRIDJET}" @@ -6525,7 +7593,9 @@ if [ "x$ENABLE_GRIDJET" == "xyes" ] ; then -$as_echo "#define ENABLE_PLUGIN_GRIDJET /**/" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define ENABLE_PLUGIN_GRIDJET /**/ +_ACEOF if [ "x$monolithic" != "xyes" ] ; then CONFIG_LIBS_PLUGINS=${CONFIG_LIBS_PLUGINS}" -lGridJetPlugin " @@ -6550,21 +7620,21 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ENABLE_GRIDJET}" >&5 + { $as_echo "$as_me:$LINENO: result: ${ENABLE_GRIDJET}" >&5 $as_echo "${ENABLE_GRIDJET}" >&6; } case `pwd` in *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 + { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac -macro_version='2.4' -macro_revision='1.3293' +macro_version='2.2.6b' +macro_revision='1.3017' @@ -6582,27 +7652,35 @@ # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +{ $as_echo "$as_me:$LINENO: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : +if test "${ac_cv_build+set}" = set; then $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +$as_echo "$as_me: error: invalid value of canonical build" >&2;} + { (exit 1); exit 1; }; };; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' @@ -6618,24 +7696,28 @@ case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +{ $as_echo "$as_me:$LINENO: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : +if test "${ac_cv_host+set}" = set; then $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +$as_echo "$as_me: error: invalid value of canonical host" >&2;} + { (exit 1); exit 1; }; };; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' @@ -6651,78 +7733,9 @@ case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -$as_echo_n "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case "$ECHO" in - printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -$as_echo "printf" >&6; } ;; - print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -$as_echo "print -r" >&6; } ;; - *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -$as_echo "cat" >&6; } ;; -esac - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } -if ${ac_cv_path_SED+:} false; then : +if test "${ac_cv_path_SED+set}" = set; then $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ @@ -6730,7 +7743,7 @@ ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} + $as_unset ac_script || ac_script= if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST @@ -6739,7 +7752,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do + for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue @@ -6759,7 +7772,7 @@ $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val + ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" @@ -6774,17 +7787,19 @@ $ac_path_SED_found && break 3 done done - done +done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;} + { (exit 1); exit 1; }; } fi else ac_cv_path_SED=$SED fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed @@ -6802,9 +7817,9 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } -if ${ac_cv_path_FGREP+:} false; then : +if test "${ac_cv_path_FGREP+set}" = set; then $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 @@ -6818,7 +7833,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do + for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue @@ -6838,7 +7853,7 @@ $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val + ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" @@ -6853,10 +7868,12 @@ $ac_path_FGREP_found && break 3 done done - done +done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then - as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } fi else ac_cv_path_FGREP=$FGREP @@ -6864,7 +7881,7 @@ fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" @@ -6890,7 +7907,7 @@ # Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : +if test "${with_gnu_ld+set}" = set; then withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no @@ -6899,7 +7916,7 @@ ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 + { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) @@ -6929,13 +7946,13 @@ ;; esac elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 + { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 + { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi -if ${lt_cv_path_LD+:} false; then : +if test "${lt_cv_path_LD+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$LD"; then @@ -6966,16 +7983,18 @@ LD="$lt_cv_path_LD" if test -n "$LD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 + { $as_echo "$as_me:$LINENO: result: $LD" >&5 $as_echo "$LD" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : +if test "${lt_cv_prog_gnu_ld+set}" = set; then $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. @@ -6988,7 +8007,7 @@ ;; esac fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld @@ -7000,9 +8019,9 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +{ $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if ${lt_cv_path_NM+:} false; then : +if test "${lt_cv_path_NM+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$NM"; then @@ -7049,23 +8068,20 @@ : ${lt_cv_path_NM=no} fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - if test -n "$ac_tool_prefix"; then - for ac_prog in dumpbin "link -dump" + if test -n "$ac_tool_prefix"; then + for ac_prog in "dumpbin -symbols" "link -dump -symbols" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DUMPBIN+:} false; then : +if test "${ac_cv_prog_DUMPBIN+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then @@ -7076,24 +8092,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 + { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -7103,13 +8119,13 @@ fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in dumpbin "link -dump" + for ac_prog in "dumpbin -symbols" "link -dump -symbols" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : +if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then @@ -7120,24 +8136,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -7150,7 +8166,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -7158,15 +8174,6 @@ fi fi - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols" - ;; - *) - DUMPBIN=: - ;; - esac - fi if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" @@ -7179,33 +8186,33 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } -if ${lt_cv_nm_interface+:} false; then : +if test "${lt_cv_nm_interface+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval echo "\"\$as_me:8196: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval echo "\"\$as_me:8199: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: output\"" >&5) + (eval echo "\"\$as_me:8202: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } # find the maximum length of command line arguments -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } -if ${lt_cv_sys_max_cmd_len+:} false; then : +if test "${lt_cv_sys_max_cmd_len+set}" = set; then $as_echo_n "(cached) " >&6 else i=0 @@ -7238,11 +8245,6 @@ lt_cv_sys_max_cmd_len=8192; ;; - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. @@ -7307,8 +8309,8 @@ # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && + while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ + = "XX$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` @@ -7328,10 +8330,10 @@ fi if test -n $lt_cv_sys_max_cmd_len ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 + { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 + { $as_echo "$as_me:$LINENO: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len @@ -7345,27 +8347,27 @@ : ${MV="mv -f"} : ${RM="rm -f"} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 +{ $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ + test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 +{ $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5 $as_echo "$xsi_shell" >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 +{ $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 $as_echo_n "checking whether the shell understands \"+=\"... " >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5 $as_echo "$lt_shell_append" >&6; } @@ -7400,88 +8402,14 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 -$as_echo_n "checking how to convert $build file names to $host format... " >&6; } -if ${lt_cv_to_host_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac - -fi - -to_host_file_cmd=$lt_cv_to_host_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 -$as_echo "$lt_cv_to_host_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 -$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } -if ${lt_cv_to_tool_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - #assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac - -fi - -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 -$as_echo "$lt_cv_to_tool_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } -if ${lt_cv_ld_reload_flag+:} false; then : +if test "${lt_cv_ld_reload_flag+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in @@ -7490,11 +8418,6 @@ esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - if test "$GCC" != yes; then - reload_cmds=false - fi - ;; darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' @@ -7515,9 +8438,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : +if test "${ac_cv_prog_OBJDUMP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then @@ -7528,24 +8451,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 + { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -7555,9 +8478,9 @@ ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : +if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then @@ -7568,24 +8491,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -7594,7 +8517,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -7614,9 +8537,9 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } -if ${lt_cv_deplibs_check_method+:} false; then : +if test "${lt_cv_deplibs_check_method+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' @@ -7658,18 +8581,16 @@ # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; -cegcc*) +cegcc) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' @@ -7699,10 +8620,6 @@ lt_cv_deplibs_check_method=pass_all ;; -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in @@ -7711,11 +8628,11 @@ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac @@ -7737,7 +8654,7 @@ ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu) lt_cv_deplibs_check_method=pass_all ;; @@ -7816,23 +8733,8 @@ esac fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` - fi - ;; - esac -fi - file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown @@ -7848,111 +8750,100 @@ - - - - - - - - - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DLLTOOL+:} false; then : +if test "${ac_cv_prog_AR+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_AR="${ac_tool_prefix}ar" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -$as_echo "$DLLTOOL" >&6; } +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:$LINENO: result: $AR" >&5 +$as_echo "$AR" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_ac_ct_AR="ar" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -$as_echo "$ac_ct_DLLTOOL" >&6; } +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" + if test "x$ac_ct_AR" = x; then + AR="false" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - DLLTOOL=$ac_ct_DLLTOOL + AR=$ac_ct_AR fi else - DLLTOOL="$ac_cv_prog_DLLTOOL" + AR="$ac_cv_prog_AR" fi -test -z "$DLLTOOL" && DLLTOOL=dlltool - - +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru @@ -7961,308 +8852,102 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 -$as_echo_n "checking how to associate runtime and link libraries... " >&6; } -if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 -$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - - - - if test -n "$ac_tool_prefix"; then - for ac_prog in ar - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : +if test "${ac_cv_prog_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi - test -n "$AR" && break - done fi -if test -z "$AR"; then - ac_ct_AR=$AR - for ac_prog in ar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AR+:} false; then : +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi - - test -n "$ac_ct_AR" && break -done - - if test "x$ac_ct_AR" = x; then - AR="false" + if test "x$ac_ct_STRIP" = x; then + STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - AR=$ac_ct_AR + STRIP=$ac_ct_STRIP fi +else + STRIP="$ac_cv_prog_STRIP" fi -: ${AR=ar} -: ${AR_FLAGS=cru} - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 -$as_echo_n "checking for archiver @FILE support... " >&6; } -if ${lt_cv_ar_at_file+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ar_at_file=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test "$ac_status" -eq 0; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test "$ac_status" -ne 0; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 -$as_echo "$lt_cv_ar_at_file" >&6; } - -if test "x$lt_cv_ar_at_file" = xno; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -test -z "$STRIP" && STRIP=: +test -z "$STRIP" && STRIP=: @@ -8272,9 +8957,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : +if test "${ac_cv_prog_RANLIB+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then @@ -8285,24 +8970,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 + { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -8312,9 +8997,9 @@ ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then @@ -8325,24 +9010,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -8351,7 +9036,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -8385,18 +9070,6 @@ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac - - - - - - @@ -8441,9 +9114,9 @@ # Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if ${lt_cv_sys_global_symbol_pipe+:} false; then : +if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then $as_echo_n "(cached) " >&6 else @@ -8504,8 +9177,8 @@ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= @@ -8541,7 +9214,6 @@ else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no @@ -8560,18 +9232,18 @@ int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then # Now try to grab the symbols. nlist=conftest.nm - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "$nlist"; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" @@ -8583,18 +9255,6 @@ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - #ifdef __cplusplus extern "C" { #endif @@ -8606,7 +9266,7 @@ cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ -LT_DLSYM_CONST struct { +const struct { const char *name; void *address; } @@ -8632,19 +9292,19 @@ _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext}; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext}; then pipe_works=yes fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&5 fi @@ -8674,28 +9334,13 @@ lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 + { $as_echo "$as_me:$LINENO: result: failed" >&5 $as_echo "failed" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 + { $as_echo "$as_me:$LINENO: result: ok" >&5 $as_echo "ok" >&6; } fi -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - - - - - - - - - @@ -8714,45 +9359,11 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 -$as_echo_n "checking for sysroot... " >&6; } - -# Check whether --with-sysroot was given. -if test "${with_sysroot+set}" = set; then : - withval=$with_sysroot; -else - with_sysroot=no -fi - - -lt_sysroot= -case ${with_sysroot} in #( - yes) - if test "$GCC" = yes; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 -$as_echo "${with_sysroot}" >&6; } - as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 - ;; -esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 -$as_echo "${lt_sysroot:-no}" >&6; } - - # Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then : +if test "${enable_libtool_lock+set}" = set; then enableval=$enable_libtool_lock; fi @@ -8764,11 +9375,11 @@ ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" @@ -8782,12 +9393,12 @@ ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + echo '#line 9396 "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) @@ -8821,11 +9432,11 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in @@ -8874,9 +9485,9 @@ # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 + { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if ${lt_cv_cc_needs_belf+:} false; then : +if test "${lt_cv_cc_needs_belf+set}" = set; then $as_echo_n "(cached) " >&6 else ac_ext=c @@ -8885,7 +9496,11 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -8896,13 +9511,38 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then lt_cv_cc_needs_belf=yes else - lt_cv_cc_needs_belf=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_cc_needs_belf=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -8910,7 +9550,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf @@ -8920,11 +9560,11 @@ sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in @@ -8944,132 +9584,15 @@ need_locks="$enable_libtool_lock" -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. -set dummy ${ac_tool_prefix}mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$MANIFEST_TOOL"; then - ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL -if test -n "$MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 -$as_echo "$MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_MANIFEST_TOOL"; then - ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL - # Extract the first word of "mt", so it can be a program name with args. -set dummy mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_MANIFEST_TOOL"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL -if test -n "$ac_ct_MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 -$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_MANIFEST_TOOL" = x; then - MANIFEST_TOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL - fi -else - MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" -fi - -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 -$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } -if ${lt_cv_path_mainfest_tool+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&5 - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 -$as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test "x$lt_cv_path_mainfest_tool" != xyes; then - MANIFEST_TOOL=: -fi - - - - - case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DSYMUTIL+:} false; then : +if test "${ac_cv_prog_DSYMUTIL+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$DSYMUTIL"; then @@ -9080,24 +9603,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 + { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 $as_echo "$DSYMUTIL" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -9107,9 +9630,9 @@ ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : +if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DSYMUTIL"; then @@ -9120,24 +9643,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 $as_echo "$ac_ct_DSYMUTIL" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -9146,7 +9669,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -9159,9 +9682,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_NMEDIT+:} false; then : +if test "${ac_cv_prog_NMEDIT+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$NMEDIT"; then @@ -9172,24 +9695,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 + { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5 $as_echo "$NMEDIT" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -9199,9 +9722,9 @@ ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : +if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_NMEDIT"; then @@ -9212,24 +9735,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 $as_echo "$ac_ct_NMEDIT" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -9238,7 +9761,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -9251,9 +9774,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_LIPO+:} false; then : +if test "${ac_cv_prog_LIPO+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$LIPO"; then @@ -9264,24 +9787,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 + { $as_echo "$as_me:$LINENO: result: $LIPO" >&5 $as_echo "$LIPO" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -9291,9 +9814,9 @@ ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_LIPO+:} false; then : +if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_LIPO"; then @@ -9304,24 +9827,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_LIPO="lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 $as_echo "$ac_ct_LIPO" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -9330,7 +9853,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -9343,9 +9866,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL+:} false; then : +if test "${ac_cv_prog_OTOOL+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$OTOOL"; then @@ -9356,24 +9879,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 + { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5 $as_echo "$OTOOL" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -9383,9 +9906,9 @@ ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : +if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL"; then @@ -9396,24 +9919,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL="otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 $as_echo "$ac_ct_OTOOL" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -9422,7 +9945,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -9435,9 +9958,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL64+:} false; then : +if test "${ac_cv_prog_OTOOL64+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$OTOOL64"; then @@ -9448,24 +9971,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 + { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5 $as_echo "$OTOOL64" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -9475,9 +9998,9 @@ ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : +if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL64"; then @@ -9488,24 +10011,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL64="otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 $as_echo "$ac_ct_OTOOL64" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -9514,7 +10037,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -9550,9 +10073,9 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 + { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } -if ${lt_cv_apple_cc_single_mod+:} false; then : +if test "${lt_cv_apple_cc_single_mod+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no @@ -9577,130 +10100,901 @@ rm -f conftest.* fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 + { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if ${lt_cv_ld_exported_symbols_list+:} false; then : +if test "${lt_cv_ld_exported_symbols_list+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + lt_cv_ld_exported_symbols_list=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_ld_exported_symbols_list=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + + +for ac_header in dlfcn.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +if test -z "$CXX"; then + if test -n "$CCC"; then + CXX=$CCC + else + if test -n "$ac_tool_prefix"; then + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CXX+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CXX"; then + ac_cv_prog_CXX="$CXX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CXX=$ac_cv_prog_CXX +if test -n "$CXX"; then + { $as_echo "$as_me:$LINENO: result: $CXX" >&5 +$as_echo "$CXX" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CXX" && break + done +fi +if test -z "$CXX"; then + ac_ct_CXX=$CXX + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CXX"; then + ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CXX="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_CXX=$ac_cv_prog_ac_ct_CXX +if test -n "$ac_ct_CXX"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 +$as_echo "$ac_ct_CXX" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CXX" && break +done + + if test "x$ac_ct_CXX" = x; then + CXX="g++" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CXX=$ac_ct_CXX + fi +fi + + fi +fi +# Provide some information about the compiler. +$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 +$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } +if test "${ac_cv_cxx_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 +$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GXX=yes +else + GXX= +fi +ac_test_CXXFLAGS=${CXXFLAGS+set} +ac_save_CXXFLAGS=$CXXFLAGS +{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 +$as_echo_n "checking whether $CXX accepts -g... " >&6; } +if test "${ac_cv_prog_cxx_g+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_save_cxx_werror_flag=$ac_cxx_werror_flag + ac_cxx_werror_flag=yes + ac_cv_prog_cxx_g=no + CXXFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cxx_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CXXFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cxx_werror_flag=$ac_save_cxx_werror_flag + CXXFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cxx_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cxx_werror_flag=$ac_save_cxx_werror_flag +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 +$as_echo "$ac_cv_prog_cxx_g" >&6; } +if test "$ac_test_CXXFLAGS" = set; then + CXXFLAGS=$ac_save_CXXFLAGS +elif test $ac_cv_prog_cxx_g = yes; then + if test "$GXX" = yes; then + CXXFLAGS="-g -O2" + else + CXXFLAGS="-g" + fi +else + if test "$GXX" = yes; then + CXXFLAGS="-O2" + else + CXXFLAGS= + fi +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +depcc="$CXX" am_compiler_list= + +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CXX_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CXX_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CXX_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } +CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then + am__fastdepCXX_TRUE= + am__fastdepCXX_FALSE='#' +else + am__fastdepCXX_TRUE='#' + am__fastdepCXX_FALSE= +fi + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +$as_echo_n "checking how to run the C++ preprocessor... " >&6; } +if test -z "$CXXCPP"; then + if test "${ac_cv_prog_CXXCPP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" + do + ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi + +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -int -main () -{ + # Passes both tests. +ac_preproc_ok=: +break +fi - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_ld_exported_symbols_list=yes -else - lt_cv_ld_exported_symbols_list=no +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" + + done + ac_cv_prog_CXXCPP=$CXXCPP fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 -$as_echo_n "checking for -force_load linker flag... " >&6; } -if ${lt_cv_ld_force_load+:} false; then : - $as_echo_n "(cached) " >&6 + CXXCPP=$ac_cv_prog_CXXCPP else - lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR cru libconftest.a conftest.o" >&5 - $AR cru libconftest.a conftest.o 2>&5 - echo "$RANLIB libconftest.a" >&5 - $RANLIB libconftest.a 2>&5 - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&5 - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM + ac_cv_prog_CXXCPP=$CXXCPP +fi +{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5 +$as_echo "$CXXCPP" >&6; } +ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. +continue fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 -$as_echo "$lt_cv_ld_force_load" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac -for ac_header in dlfcn.h -do : - ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -" -if test "x$ac_cv_header_dlfcn_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_DLFCN_H 1 +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include _ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. +ac_preproc_ok=: +break fi -done - +rm -f conftest.err conftest.$ac_ext +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +_lt_caught_CXX_error=yes; } +fi -func_stripname_cnf () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname_cnf +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +else + _lt_caught_CXX_error=yes +fi @@ -9717,7 +11011,7 @@ # Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : +if test "${enable_static+set}" = set; then enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; @@ -9749,7 +11043,7 @@ # Check whether --with-pic was given. -if test "${with_pic+set}" = set; then : +if test "${with_pic+set}" = set; then withval=$with_pic; pic_mode="$withval" else pic_mode=default @@ -9765,7 +11059,7 @@ # Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then : +if test "${enable_fast_install+set}" = set; then enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; @@ -9827,7 +11121,6 @@ - test -z "$LN_S" && LN_S="ln -s" @@ -9847,9 +11140,9 @@ setopt NO_GLOB_SUBST fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +{ $as_echo "$as_me:$LINENO: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } -if ${lt_cv_objdir+:} false; then : +if test "${lt_cv_objdir+set}" = set; then $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null @@ -9862,7 +11155,7 @@ fi rmdir .libs 2>/dev/null fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir @@ -9877,6 +11170,19 @@ + + + + + + + + + + + + + case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some @@ -9889,6 +11195,23 @@ ;; esac +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + # Global variables: ofile=libtool can_build_shared=yes @@ -9917,7 +11240,7 @@ *) break;; esac done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it @@ -9925,9 +11248,9 @@ case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 + { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in @@ -9978,10 +11301,10 @@ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 + { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -9991,9 +11314,9 @@ if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 + { $as_echo "$as_me:$LINENO: checking for file" >&5 $as_echo_n "checking for file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in @@ -10044,10 +11367,10 @@ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 + { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -10126,16 +11449,11 @@ lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then - case $cc_basename in - nvcc*) - lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; - *) - lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; - esac + lt_prog_compiler_no_builtin_flag=' -fno-builtin' - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no @@ -10151,15 +11469,15 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11472: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:11476: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes @@ -10168,7 +11486,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then @@ -10188,6 +11506,8 @@ lt_prog_compiler_pic= lt_prog_compiler_static= +{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' @@ -10235,12 +11555,6 @@ lt_prog_compiler_pic='-fno-common' ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag @@ -10283,13 +11597,6 @@ lt_prog_compiler_pic='-fPIC' ;; esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - lt_prog_compiler_pic='-Xcompiler -fPIC' - ;; - esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in @@ -10331,7 +11638,7 @@ lt_prog_compiler_static='-non_shared' ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) @@ -10352,13 +11659,7 @@ lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' @@ -10370,26 +11671,26 @@ # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + xl*) + # IBM XL C 8.0/Fortran 10.1 on PPC lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; esac ;; esac @@ -10420,7 +11721,7 @@ lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + f77* | f90* | f95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; @@ -10477,25 +11778,21 @@ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac +{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +$as_echo "$lt_prog_compiler_pic" >&6; } + + + + -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic=$lt_prog_compiler_pic -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -$as_echo "$lt_cv_prog_compiler_pic" >&6; } -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if ${lt_cv_prog_compiler_pic_works+:} false; then : +if test "${lt_cv_prog_compiler_pic_works+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no @@ -10511,15 +11808,15 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11811: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:11815: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes @@ -10528,7 +11825,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then @@ -10548,18 +11845,13 @@ - - - - - # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works+:} false; then : +if test "${lt_cv_prog_compiler_static_works+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no @@ -10572,7 +11864,7 @@ if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes @@ -10585,7 +11877,7 @@ LDFLAGS="$save_LDFLAGS" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then @@ -10600,9 +11892,9 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : +if test "${lt_cv_prog_compiler_c_o+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no @@ -10621,16 +11913,16 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11916: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:11920: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes @@ -10647,7 +11939,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } @@ -10655,9 +11947,9 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : +if test "${lt_cv_prog_compiler_c_o+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no @@ -10676,16 +11968,16 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11971: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:11975: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes @@ -10702,7 +11994,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } @@ -10711,7 +12003,7 @@ hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 + { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* @@ -10719,10 +12011,10 @@ touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 + { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi @@ -10735,7 +12027,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 + { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= @@ -10798,33 +12090,7 @@ esac ld_shlibs=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' @@ -10842,7 +12108,6 @@ fi supports_anon_versioning=no case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... @@ -10858,12 +12123,11 @@ ld_shlibs=no cat <<_LT_EOF 1>&2 -*** Warning: the GNU linker, at least up to release 2.19, is reported +*** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. _LT_EOF fi @@ -10899,12 +12163,10 @@ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='${wl}--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' @@ -10922,11 +12184,6 @@ fi ;; - haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - link_all_deplibs=yes - ;; - interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no @@ -10942,7 +12199,7 @@ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + gnu* | linux* | tpf* | k*bsd*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in @@ -10952,16 +12209,15 @@ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then - tmp_addflag=' $pic_flag' + tmp_addflag= tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -10972,17 +12228,13 @@ lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 @@ -10998,17 +12250,17 @@ fi case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) + xlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec= hardcode_libdir_flag_spec_ld='-rpath $libdir' - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac @@ -11022,8 +12274,8 @@ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -11041,8 +12293,8 @@ _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -11088,8 +12340,8 @@ *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -11129,10 +12381,8 @@ else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi @@ -11219,13 +12469,11 @@ allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -11236,34 +12484,54 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" - fi +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + - aix_libpath=$lt_cv_aix_libpath_ fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' @@ -11272,13 +12540,11 @@ else # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -11289,44 +12555,59 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" - fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -fi - aix_libpath=$lt_cv_aix_libpath_ fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - fi + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' @@ -11358,63 +12639,20 @@ # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - always_export_symbols=yes - file_list_spec='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, )='true' - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - old_postinstall_cmds='chmod 644 $oldlib' - postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - enable_shared_with_static_runtimes=yes - ;; - esac + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes=yes ;; darwin* | rhapsody*) @@ -11424,11 +12662,7 @@ hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - else - whole_archive_flag_spec='' - fi + whole_archive_flag_spec='' link_all_deplibs=yes allow_undefined_flag="$_lt_dar_allow_undefined" case $cc_basename in @@ -11436,7 +12670,7 @@ *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all + output_verbose_link_cmd=echo archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" @@ -11479,7 +12713,7 @@ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no @@ -11487,7 +12721,7 @@ hpux9*) if test "$GCC" = yes; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi @@ -11502,8 +12736,8 @@ ;; hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi @@ -11521,16 +12755,16 @@ ;; hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then + if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else @@ -11542,46 +12776,7 @@ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 -$as_echo_n "checking if $CC understands -b... " >&6; } -if ${lt_cv_prog_compiler__b+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler__b=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -b" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler__b=yes - fi - else - lt_cv_prog_compiler__b=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 -$as_echo "$lt_cv_prog_compiler__b" >&6; } - -if test x"$lt_cv_prog_compiler__b" = xyes; then - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -fi - + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi @@ -11609,39 +12804,52 @@ irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -if ${lt_cv_irix_exported_symbol+:} false; then : - $as_echo_n "(cached) " >&6 -else - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int foo (void) { return 0; } + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat >conftest.$ac_ext <<_ACEOF +int foo(void) {} _ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_irix_exported_symbol=yes +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + else - lt_cv_irix_exported_symbol=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -$as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test "$lt_cv_irix_exported_symbol" = yes; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' @@ -11703,17 +12911,17 @@ hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' @@ -11723,13 +12931,13 @@ osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' @@ -11742,9 +12950,9 @@ no_undefined_flag=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' - archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) @@ -11893,7 +13101,7 @@ fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no @@ -11930,52 +13138,46 @@ # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 + { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } - archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc=no + else + archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +$as_echo "$archive_cmds_need_lc" >&6; } ;; esac fi @@ -12138,7 +13340,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 + { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then @@ -12146,23 +13348,16 @@ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= @@ -12175,7 +13370,7 @@ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' + lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; @@ -12195,13 +13390,7 @@ if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([A-Za-z]:\),\1,g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` + sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi @@ -12289,7 +13478,7 @@ m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; @@ -12320,9 +13509,8 @@ need_version=no need_lib_prefix=no - case $GCC,$cc_basename in - yes,*) - # gcc + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ @@ -12343,83 +13531,36 @@ cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' ;; *) - # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' ;; esac + dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; @@ -12506,19 +13647,6 @@ hardcode_into_libs=yes ;; -haiku*) - version_type=linux - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. @@ -12561,10 +13689,8 @@ soname_spec='${libname}${release}${shared_ext}$major' ;; esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 ;; interix[3-9]*) @@ -12622,7 +13748,7 @@ ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -12631,17 +13757,16 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -12652,19 +13777,43 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then + shlibpath_overrides_runpath=yes fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir + +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install @@ -12676,9 +13825,8 @@ # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -12878,7 +14026,7 @@ dynamic_linker=no ;; esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no @@ -12980,12 +14128,7 @@ - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 + { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || @@ -13010,7 +14153,7 @@ # directories. hardcode_action=unsupported fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test "$hardcode_action" = relink || @@ -13055,14 +14198,18 @@ darwin*) # if libdl is installed we need to link against it - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 + { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : +if test "${ac_cv_lib_dl_dlopen+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -13080,18 +14227,43 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_dl_dlopen=yes else - ac_cv_lib_dl_dlopen=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else @@ -13101,21 +14273,109 @@ fi - ;; - - *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -if test "x$ac_cv_func_shl_load" = xyes; then : + ;; + + *) + { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 +$as_echo_n "checking for shl_load... " >&6; } +if test "${ac_cv_func_shl_load+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ +#define shl_load innocuous_shl_load + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef shl_load + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_shl_load || defined __stub___shl_load +choke me +#endif + +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_shl_load=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_shl_load=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +$as_echo "$ac_cv_func_shl_load" >&6; } +if test "x$ac_cv_func_shl_load" = x""yes; then lt_cv_dlopen="shl_load" else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 + { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } -if ${ac_cv_lib_dld_shl_load+:} false; then : +if test "${ac_cv_lib_dld_shl_load+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -13133,32 +14393,145 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_dld_shl_load=yes else - ac_cv_lib_dld_shl_load=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_shl_load=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = xyes; then : +if test "x$ac_cv_lib_dld_shl_load" = x""yes; then lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else - ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -if test "x$ac_cv_func_dlopen" = xyes; then : + { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 +$as_echo_n "checking for dlopen... " >&6; } +if test "${ac_cv_func_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define dlopen to an innocuous variant, in case declares dlopen. + For example, HP-UX 11i declares gettimeofday. */ +#define dlopen innocuous_dlopen + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef dlopen + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_dlopen || defined __stub___dlopen +choke me +#endif + +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +$as_echo "$ac_cv_func_dlopen" >&6; } +if test "x$ac_cv_func_dlopen" = x""yes; then lt_cv_dlopen="dlopen" else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 + { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : +if test "${ac_cv_lib_dl_dlopen+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -13176,28 +14549,57 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_dl_dlopen=yes else - ac_cv_lib_dl_dlopen=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 + { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } -if ${ac_cv_lib_svld_dlopen+:} false; then : +if test "${ac_cv_lib_svld_dlopen+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -13215,28 +14617,57 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_svld_dlopen=yes else - ac_cv_lib_svld_dlopen=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_svld_dlopen=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = xyes; then : +if test "x$ac_cv_lib_svld_dlopen" = x""yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 + { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } -if ${ac_cv_lib_dld_dld_link+:} false; then : +if test "${ac_cv_lib_dld_dld_link+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -13254,18 +14685,43 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_dld_dld_link=yes else - ac_cv_lib_dld_dld_link=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_dld_link=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = xyes; then : +if test "x$ac_cv_lib_dld_dld_link" = x""yes; then lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi @@ -13304,9 +14760,9 @@ save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 + { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self+:} false; then : +if test "${lt_cv_dlopen_self+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : @@ -13315,7 +14771,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" +#line 14774 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13356,13 +14812,7 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } +void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); @@ -13371,11 +14821,7 @@ if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else @@ -13384,11 +14830,11 @@ return status; } _LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -13405,14 +14851,14 @@ fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 + { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self_static+:} false; then : +if test "${lt_cv_dlopen_self_static+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : @@ -13421,7 +14867,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" +#line 14870 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -13462,13 +14908,7 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } +void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); @@ -13477,11 +14917,7 @@ if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else @@ -13490,11 +14926,11 @@ return status; } _LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -13511,7 +14947,7 @@ fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi @@ -13550,233 +14986,94 @@ striplib= old_striplib= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - fi - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi - - - - - - - - - - - - - # Report which library types will actually be built - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } - - - - -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 -$as_echo_n "checking how to run the C++ preprocessor... " >&6; } -if test -z "$CXXCPP"; then - if ${ac_cv_prog_CXXCPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } else - # Passes both tests. -ac_preproc_ok=: -break +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac fi -rm -f conftest.err conftest.i conftest.$ac_ext -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - done - ac_cv_prog_CXXCPP=$CXXCPP -fi - CXXCPP=$ac_cv_prog_CXXCPP -else - ac_cv_prog_CXXCPP=$CXXCPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 -$as_echo "$CXXCPP" >&6; } -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi + + + + + # Report which library types will actually be built + { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:$LINENO: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -else - _lt_caught_CXX_error=yes -fi +CC="$lt_save_CC" + ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' @@ -13803,8 +15100,6 @@ module_expsym_cmds_CXX= link_all_deplibs_CXX=unknown old_archive_cmds_CXX=$old_archive_cmds -reload_flag_CXX=$reload_flag -reload_cmds_CXX=$reload_cmds no_undefined_flag_CXX= whole_archive_flag_spec_CXX= enable_shared_with_static_runtimes_CXX=no @@ -13860,7 +15155,6 @@ # Allow CC to be a program name with arguments. lt_save_CC=$CC - lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX @@ -13878,7 +15172,6 @@ fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} - CFLAGS=$CXXFLAGS compiler=$CC compiler_CXX=$CC for cc_temp in $compiler""; do @@ -13889,7 +15182,7 @@ *) break;; esac done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` if test -n "$compiler"; then @@ -13907,7 +15200,7 @@ # Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : +if test "${with_gnu_ld+set}" = set; then withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no @@ -13916,7 +15209,7 @@ ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 + { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) @@ -13946,13 +15239,13 @@ ;; esac elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 + { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 + { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi -if ${lt_cv_path_LD+:} false; then : +if test "${lt_cv_path_LD+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$LD"; then @@ -13983,16 +15276,18 @@ LD="$lt_cv_path_LD" if test -n "$LD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 + { $as_echo "$as_me:$LINENO: result: $LD" >&5 $as_echo "$LD" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : +if test "${lt_cv_prog_gnu_ld+set}" = set; then $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. @@ -14005,7 +15300,7 @@ ;; esac fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld @@ -14018,8 +15313,8 @@ # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then - archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' @@ -14051,7 +15346,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else GXX=no @@ -14060,7 +15355,7 @@ fi # PORTME: fill in a description of your system's C++ link characteristics - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 + { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ld_shlibs_CXX=yes case $host_os in @@ -14161,13 +15456,11 @@ allow_undefined_flag_CXX='-berok' # Determine the default libpath from the value encoded in an empty # executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath__CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -14178,35 +15471,55 @@ return 0; } _ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX="/usr/lib:/lib" - fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -fi - aix_libpath=$lt_cv_aix_libpath__CXX fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' @@ -14215,13 +15528,11 @@ else # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath__CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -14232,44 +15543,59 @@ return 0; } _ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX="/usr/lib:/lib" - fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -fi - aix_libpath=$lt_cv_aix_libpath__CXX fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_CXX=' ${wl}-bernotok' allow_undefined_flag_CXX=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_CXX='$convenience' - fi + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_CXX='$convenience' archive_cmds_need_lc_CXX=yes # This is similar to how AIX traditionally builds its shared # libraries. @@ -14299,75 +15625,28 @@ ;; cygwin* | mingw* | pw32* | cegcc*) - case $GXX,$cc_basename in - ,cl* | no,cl*) - # Native MSVC - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec_CXX=' ' - allow_undefined_flag_CXX=unsupported - always_export_symbols_CXX=yes - file_list_spec_CXX='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' - enable_shared_with_static_runtimes_CXX=yes - # Don't use ranlib - old_postinstall_cmds_CXX='chmod 644 $oldlib' - postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # g++ - # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_CXX='-L$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' - allow_undefined_flag_CXX=unsupported - always_export_symbols_CXX=no - enable_shared_with_static_runtimes_CXX=yes - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs_CXX=no - fi - ;; - esac - ;; + # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_CXX='-L$libdir' + allow_undefined_flag_CXX=unsupported + always_export_symbols_CXX=no + enable_shared_with_static_runtimes_CXX=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs_CXX=no + fi + ;; darwin* | rhapsody*) @@ -14375,11 +15654,7 @@ hardcode_direct_CXX=no hardcode_automatic_CXX=yes hardcode_shlibpath_var_CXX=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - else - whole_archive_flag_spec_CXX='' - fi + whole_archive_flag_spec_CXX='' link_all_deplibs_CXX=yes allow_undefined_flag_CXX="$_lt_dar_allow_undefined" case $cc_basename in @@ -14387,7 +15662,7 @@ *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all + output_verbose_link_cmd=echo archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" @@ -14440,11 +15715,6 @@ gnu*) ;; - haiku*) - archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - link_all_deplibs_CXX=yes - ;; - hpux9*) hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: @@ -14469,11 +15739,11 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then - archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no @@ -14534,7 +15804,7 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then @@ -14544,10 +15814,10 @@ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) - archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) - archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi @@ -14577,7 +15847,7 @@ case $cc_basename in CC*) # SGI C++ - archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is @@ -14588,9 +15858,9 @@ *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' fi fi link_all_deplibs_CXX=yes @@ -14601,7 +15871,7 @@ inherit_rpath_CXX=yes ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler @@ -14619,7 +15889,7 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' @@ -14656,26 +15926,26 @@ pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in - *pgCC\ [1-5].* | *pgcpp\ [1-5].*) + *pgCC\ [1-5]* | *pgcpp\ [1-5]*) prelink_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' old_archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ $RANLIB $oldlib' archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; - *) # Version 6 and above use weak symbols + *) # Version 6 will use weak symbols archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; @@ -14683,7 +15953,7 @@ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ @@ -14702,9 +15972,9 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; - xl* | mpixl* | bgxl*) + xl*) # IBM XL 8.0 on PPC, with GNU ld hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' @@ -14724,13 +15994,13 @@ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' hardcode_libdir_flag_spec_CXX='-R$libdir' - whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object_CXX=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. - output_verbose_link_cmd='func_echo_all' + output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is @@ -14799,7 +16069,7 @@ export_dynamic_flag_spec_CXX='${wl}-E' whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi - output_verbose_link_cmd=func_echo_all + output_verbose_link_cmd=echo else ld_shlibs_CXX=no fi @@ -14834,15 +16104,15 @@ case $host in osf3*) allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ;; *) allow_undefined_flag_CXX=' -expect_unresolved \*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' hardcode_libdir_flag_spec_CXX='-rpath $libdir' ;; @@ -14858,17 +16128,17 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac @@ -14878,7 +16148,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # FIXME: insert proper C++ library support @@ -14914,7 +16184,7 @@ solaris*) case $cc_basename in - CC* | sunCC*) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ archive_cmds_need_lc_CXX=yes no_undefined_flag_CXX=' -zdefs' @@ -14935,7 +16205,7 @@ esac link_all_deplibs_CXX=yes - output_verbose_link_cmd='func_echo_all' + output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is @@ -14955,14 +16225,14 @@ if test "$GXX" = yes && test "$with_gnu_ld" = no; then no_undefined_flag_CXX=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. @@ -14973,7 +16243,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' fi hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' @@ -15027,10 +16297,6 @@ CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~ - '"$old_archive_cmds_CXX" - reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~ - '"$reload_cmds_CXX" ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' @@ -15064,7 +16330,7 @@ ;; esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 + { $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no @@ -15092,18 +16358,11 @@ }; _LT_EOF - -_lt_libdeps_save_CFLAGS=$CFLAGS -case "$CC $CFLAGS " in #( -*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -esac - -if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then # Parse the compiler output and extract the necessary # objects, libraries and library flags. @@ -15112,7 +16371,7 @@ pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in + case $p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. @@ -15121,22 +16380,13 @@ test $p = "-R"; then prev=$p continue + else + prev= fi - # Expand the sysroot to ease extracting the directories later. - if test -z "$prev"; then - case $p in - -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; - -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; - -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; - esac - fi - case $p in - =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; - esac if test "$pre_test_object_deps_done" = no; then - case ${prev} in - -L | -R) + case $p in + -L* | -R*) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. @@ -15156,10 +16406,8 @@ postdeps_CXX="${postdeps_CXX} ${prev}${p}" fi fi - prev= ;; - *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. @@ -15195,7 +16443,6 @@ fi $RM -f confest.$objext -CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken case $host_os in @@ -15231,7 +16478,7 @@ solaris*) case $cc_basename in - CC* | sunCC*) + CC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as @@ -15296,6 +16543,8 @@ lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX= +{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then @@ -15345,11 +16594,6 @@ # DJGPP does not support shared libraries at all lt_prog_compiler_pic_CXX= ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static_CXX= - ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. @@ -15399,11 +16643,6 @@ ;; esac ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_CXX='-DDLL_EXPORT' - ;; dgux*) case $cc_basename in ec++*) @@ -15460,7 +16699,7 @@ ;; esac ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler @@ -15493,8 +16732,8 @@ lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; - xlc* | xlC* | bgxl[cC]* | mpixl[cC]*) - # IBM XL 8.0, 9.0 on PPC and BlueGene + xlc* | xlC*) + # IBM XL 8.0 on PPC lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-qpic' lt_prog_compiler_static_CXX='-qstaticlink' @@ -15556,7 +16795,7 @@ ;; solaris*) case $cc_basename in - CC* | sunCC*) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' @@ -15621,25 +16860,18 @@ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" ;; esac +{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 +$as_echo "$lt_prog_compiler_pic_CXX" >&6; } + -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic_CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; } -lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } -if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then : +if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works_CXX=no @@ -15655,15 +16887,15 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16890: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:16894: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_CXX=yes @@ -15672,7 +16904,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then @@ -15689,15 +16921,13 @@ - - # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works_CXX+:} false; then : +if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works_CXX=no @@ -15710,7 +16940,7 @@ if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_CXX=yes @@ -15723,7 +16953,7 @@ LDFLAGS="$save_LDFLAGS" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then @@ -15735,9 +16965,9 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : +if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no @@ -15756,16 +16986,16 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16989: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:16993: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes @@ -15782,14 +17012,14 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : +if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no @@ -15808,16 +17038,16 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:17041: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:17045: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes @@ -15834,7 +17064,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } @@ -15843,7 +17073,7 @@ hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 + { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* @@ -15851,10 +17081,10 @@ touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 + { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi @@ -15864,41 +17094,33 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 + { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' case $host_os in aix[4-9]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global defined - # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) export_symbols_cmds_CXX="$ltdll_cmds" - ;; + ;; cygwin* | mingw* | cegcc*) - case $cc_basename in - cl*) ;; - *) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - ;; - esac - ;; + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; + ;; esac + exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 +{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no @@ -15926,52 +17148,46 @@ # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 + { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_CXX - pic_flag=$lt_prog_compiler_pic_CXX - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_CXX - allow_undefined_flag_CXX= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_CXX + pic_flag=$lt_prog_compiler_pic_CXX + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_CXX + allow_undefined_flag_CXX= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc_CXX=no - else - lt_cv_archive_cmds_need_lc_CXX=yes - fi - allow_undefined_flag_CXX=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; } - archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_CXX=no + else + archive_cmds_need_lc_CXX=yes + fi + allow_undefined_flag_CXX=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 +$as_echo "$archive_cmds_need_lc_CXX" >&6; } ;; esac fi @@ -16041,7 +17257,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 + { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } library_names_spec= @@ -16128,7 +17344,7 @@ m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; @@ -16159,9 +17375,8 @@ need_version=no need_lib_prefix=no - case $GCC,$cc_basename in - yes,*) - # gcc + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ @@ -16178,86 +17393,40 @@ $RM \$dlpath' shlibpath_overrides_runpath=yes - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; + case $host_os in cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; - *) - sys_lib_search_path_spec="$LIB" + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' ;; *) - # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' ;; esac + dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; @@ -16343,19 +17512,6 @@ hardcode_into_libs=yes ;; -haiku*) - version_type=linux - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. @@ -16398,10 +17554,8 @@ soname_spec='${libname}${release}${shared_ext}$major' ;; esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 ;; interix[3-9]*) @@ -16459,7 +17613,7 @@ ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -16468,17 +17622,16 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -16489,19 +17642,43 @@ return 0; } _ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then + shlibpath_overrides_runpath=yes fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir + +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install @@ -16513,9 +17690,8 @@ # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -16715,7 +17891,7 @@ dynamic_linker=no ;; esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no @@ -16766,9 +17942,7 @@ - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 + { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action_CXX= if test -n "$hardcode_libdir_flag_spec_CXX" || @@ -16793,7 +17967,7 @@ # directories. hardcode_action_CXX=unsupported fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 +{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 $as_echo "$hardcode_action_CXX" >&6; } if test "$hardcode_action_CXX" = relink || @@ -16815,7 +17989,6 @@ fi # test -n "$compiler" CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC @@ -16868,13 +18041,13 @@ ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_fc_compiler_gnu if test -n "$ac_tool_prefix"; then - for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 + for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_FC+:} false; then : +if test "${ac_cv_prog_FC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$FC"; then @@ -16885,24 +18058,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_FC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi FC=$ac_cv_prog_FC if test -n "$FC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FC" >&5 + { $as_echo "$as_me:$LINENO: result: $FC" >&5 $as_echo "$FC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -16912,13 +18085,13 @@ fi if test -z "$FC"; then ac_ct_FC=$FC - for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 + for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_FC+:} false; then : +if test "${ac_cv_prog_ac_ct_FC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_FC"; then @@ -16929,24 +18102,286 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_FC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_FC=$ac_cv_prog_ac_ct_FC +if test -n "$ac_ct_FC"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_FC" >&5 +$as_echo "$ac_ct_FC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_FC" && break +done + + if test "x$ac_ct_FC" = x; then + FC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + FC=$ac_ct_FC + fi +fi + + +# Provide some information about the compiler. +$as_echo "$as_me:$LINENO: checking for Fortran compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +rm -f a.out + +# If we don't use `.F' as extension, the preprocessor is not run on the +# input file. (Note that this only needs to work for GNU compilers.) +ac_save_ext=$ac_ext +ac_ext=F +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran compiler" >&5 +$as_echo_n "checking whether we are using the GNU Fortran compiler... " >&6; } +if test "${ac_cv_fc_compiler_gnu+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF + program main +#ifndef __GNUC__ + choke me +#endif + + end +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_fc_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_fc_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_fc_compiler_gnu" >&5 +$as_echo "$ac_cv_fc_compiler_gnu" >&6; } +ac_ext=$ac_save_ext +ac_test_FFLAGS=${FCFLAGS+set} +ac_save_FFLAGS=$FCFLAGS +FCFLAGS= +{ $as_echo "$as_me:$LINENO: checking whether $FC accepts -g" >&5 +$as_echo_n "checking whether $FC accepts -g... " >&6; } +if test "${ac_cv_prog_fc_g+set}" = set; then + $as_echo_n "(cached) " >&6 +else + FCFLAGS=-g +cat >conftest.$ac_ext <<_ACEOF + program main + + end +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_fc_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_fc_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_prog_fc_g=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_fc_g" >&5 +$as_echo "$ac_cv_prog_fc_g" >&6; } +if test "$ac_test_FFLAGS" = set; then + FCFLAGS=$ac_save_FFLAGS +elif test $ac_cv_prog_fc_g = yes; then + if test "x$ac_cv_fc_compiler_gnu" = xyes; then + FCFLAGS="-g -O2" + else + FCFLAGS="-g" + fi +else + if test "x$ac_cv_fc_compiler_gnu" = xyes; then + FCFLAGS="-O2" + else + FCFLAGS= + fi +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu +if test -n "$ac_tool_prefix"; then + for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_FC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$FC"; then + ac_cv_prog_FC="$FC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_FC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done +done +IFS=$as_save_IFS + +fi +fi +FC=$ac_cv_prog_FC +if test -n "$FC"; then + { $as_echo "$as_me:$LINENO: result: $FC" >&5 +$as_echo "$FC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$FC" && break done +fi +if test -z "$FC"; then + ac_ct_FC=$FC + for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_FC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_FC"; then + ac_cv_prog_ac_ct_FC="$ac_ct_FC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_FC="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done IFS=$as_save_IFS fi fi ac_ct_FC=$ac_cv_prog_ac_ct_FC if test -n "$ac_ct_FC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_FC" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_FC" >&5 $as_echo "$ac_ct_FC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -16959,7 +18394,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -16969,41 +18404,54 @@ # Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran compiler version" >&5 +$as_echo "$as_me:$LINENO: checking for Fortran compiler version" >&5 set X $ac_compile ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } rm -f a.out # If we don't use `.F' as extension, the preprocessor is not run on the # input file. (Note that this only needs to work for GNU compilers.) ac_save_ext=$ac_ext ac_ext=F -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Fortran compiler" >&5 +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran compiler" >&5 $as_echo_n "checking whether we are using the GNU Fortran compiler... " >&6; } -if ${ac_cv_fc_compiler_gnu+:} false; then : +if test "${ac_cv_fc_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else - cat > conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF program main #ifndef __GNUC__ choke me @@ -17011,44 +18459,86 @@ end _ACEOF -if ac_fn_fc_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_fc_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else - ac_compiler_gnu=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_fc_compiler_gnu=$ac_compiler_gnu fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_compiler_gnu" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_fc_compiler_gnu" >&5 $as_echo "$ac_cv_fc_compiler_gnu" >&6; } ac_ext=$ac_save_ext -ac_test_FCFLAGS=${FCFLAGS+set} -ac_save_FCFLAGS=$FCFLAGS +ac_test_FFLAGS=${FCFLAGS+set} +ac_save_FFLAGS=$FCFLAGS FCFLAGS= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $FC accepts -g" >&5 +{ $as_echo "$as_me:$LINENO: checking whether $FC accepts -g" >&5 $as_echo_n "checking whether $FC accepts -g... " >&6; } -if ${ac_cv_prog_fc_g+:} false; then : +if test "${ac_cv_prog_fc_g+set}" = set; then $as_echo_n "(cached) " >&6 else FCFLAGS=-g -cat > conftest.$ac_ext <<_ACEOF +cat >conftest.$ac_ext <<_ACEOF program main end _ACEOF -if ac_fn_fc_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_fc_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_fc_g=yes else - ac_cv_prog_fc_g=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_prog_fc_g=no fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_fc_g" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_fc_g" >&5 $as_echo "$ac_cv_prog_fc_g" >&6; } -if test "$ac_test_FCFLAGS" = set; then - FCFLAGS=$ac_save_FCFLAGS +if test "$ac_test_FFLAGS" = set; then + FCFLAGS=$ac_save_FFLAGS elif test $ac_cv_prog_fc_g = yes; then if test "x$ac_cv_fc_compiler_gnu" = xyes; then FCFLAGS="-g -O2" @@ -17069,16 +18559,18 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi + + + ac_ext=${ac_fc_srcext-f} ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_fc_compiler_gnu -if test -z "$FC" || test "X$FC" = "Xno"; then - _lt_disable_FC=yes -fi - archive_cmds_need_lc_FC=no allow_undefined_flag_FC= always_export_symbols_FC=no @@ -17096,8 +18588,6 @@ module_expsym_cmds_FC= link_all_deplibs_FC=unknown old_archive_cmds_FC=$old_archive_cmds -reload_flag_FC=$reload_flag -reload_cmds_FC=$reload_cmds no_undefined_flag_FC= whole_archive_flag_spec_FC= enable_shared_with_static_runtimes_FC=no @@ -17161,9 +18651,7 @@ # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS CC=${FC-"f95"} - CFLAGS=$FCFLAGS compiler=$CC GCC=$ac_cv_fc_compiler_gnu @@ -17176,16 +18664,16 @@ *) break;; esac done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` if test -n "$compiler"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 + { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 + { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test "$can_build_shared" = "no" && enable_shared=no @@ -17205,14 +18693,14 @@ fi ;; esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 + { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 + { $as_echo "$as_me:$LINENO: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } GCC_FC="$ac_cv_fc_compiler_gnu" @@ -17238,18 +18726,11 @@ end _LT_EOF - -_lt_libdeps_save_CFLAGS=$CFLAGS -case "$CC $CFLAGS " in #( -*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -esac - -if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then # Parse the compiler output and extract the necessary # objects, libraries and library flags. @@ -17258,7 +18739,7 @@ pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in + case $p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. @@ -17267,22 +18748,13 @@ test $p = "-R"; then prev=$p continue + else + prev= fi - # Expand the sysroot to ease extracting the directories later. - if test -z "$prev"; then - case $p in - -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; - -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; - -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; - esac - fi - case $p in - =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; - esac if test "$pre_test_object_deps_done" = no; then - case ${prev} in - -L | -R) + case $p in + -L* | -R*) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. @@ -17302,10 +18774,8 @@ postdeps_FC="${postdeps_FC} ${prev}${p}" fi fi - prev= ;; - *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. @@ -17341,7 +18811,6 @@ fi $RM -f confest.$objext -CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken @@ -17370,6 +18839,8 @@ lt_prog_compiler_pic_FC= lt_prog_compiler_static_FC= +{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl_FC='-Wl,' @@ -17417,12 +18888,6 @@ lt_prog_compiler_pic_FC='-fno-common' ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static_FC= - ;; - hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag @@ -17465,13 +18930,6 @@ lt_prog_compiler_pic_FC='-fPIC' ;; esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl_FC='-Xlinker ' - lt_prog_compiler_pic_FC='-Xcompiler -fPIC' - ;; - esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in @@ -17513,7 +18971,7 @@ lt_prog_compiler_static_FC='-non_shared' ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) @@ -17534,13 +18992,7 @@ lt_prog_compiler_pic_FC='--shared' lt_prog_compiler_static_FC='--static' ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl_FC='-Wl,-Wl,,' - lt_prog_compiler_pic_FC='-PIC' - lt_prog_compiler_static_FC='-Bstatic' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl_FC='-Wl,' @@ -17552,26 +19004,26 @@ # All Alpha code is PIC. lt_prog_compiler_static_FC='-non_shared' ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + xl*) + # IBM XL C 8.0/Fortran 10.1 on PPC lt_prog_compiler_wl_FC='-Wl,' lt_prog_compiler_pic_FC='-qpic' lt_prog_compiler_static_FC='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic_FC='-KPIC' - lt_prog_compiler_static_FC='-Bstatic' - lt_prog_compiler_wl_FC='' - ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic_FC='-KPIC' lt_prog_compiler_static_FC='-Bstatic' lt_prog_compiler_wl_FC='-Wl,' ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic_FC='-KPIC' + lt_prog_compiler_static_FC='-Bstatic' + lt_prog_compiler_wl_FC='' + ;; esac ;; esac @@ -17602,7 +19054,7 @@ lt_prog_compiler_pic_FC='-KPIC' lt_prog_compiler_static_FC='-Bstatic' case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + f77* | f90* | f95*) lt_prog_compiler_wl_FC='-Qoption ld ';; *) lt_prog_compiler_wl_FC='-Wl,';; @@ -17659,25 +19111,18 @@ lt_prog_compiler_pic_FC="$lt_prog_compiler_pic_FC" ;; esac +{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_FC" >&5 +$as_echo "$lt_prog_compiler_pic_FC" >&6; } + -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic_FC+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_FC=$lt_prog_compiler_pic_FC -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_FC" >&5 -$as_echo "$lt_cv_prog_compiler_pic_FC" >&6; } -lt_prog_compiler_pic_FC=$lt_cv_prog_compiler_pic_FC # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_FC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_FC works" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_FC works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_FC works... " >&6; } -if ${lt_cv_prog_compiler_pic_works_FC+:} false; then : +if test "${lt_cv_prog_compiler_pic_works_FC+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works_FC=no @@ -17693,15 +19138,15 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:19141: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:19145: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_FC=yes @@ -17710,7 +19155,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_FC" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_FC" >&5 $as_echo "$lt_cv_prog_compiler_pic_works_FC" >&6; } if test x"$lt_cv_prog_compiler_pic_works_FC" = xyes; then @@ -17727,15 +19172,13 @@ - - # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_FC eval lt_tmp_static_flag=\"$lt_prog_compiler_static_FC\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works_FC+:} false; then : +if test "${lt_cv_prog_compiler_static_works_FC+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works_FC=no @@ -17748,7 +19191,7 @@ if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_FC=yes @@ -17761,7 +19204,7 @@ LDFLAGS="$save_LDFLAGS" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_FC" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_FC" >&5 $as_echo "$lt_cv_prog_compiler_static_works_FC" >&6; } if test x"$lt_cv_prog_compiler_static_works_FC" = xyes; then @@ -17773,9 +19216,9 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o_FC+:} false; then : +if test "${lt_cv_prog_compiler_c_o_FC+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_FC=no @@ -17794,16 +19237,16 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:19240: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:19244: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_FC=yes @@ -17820,14 +19263,14 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_FC" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_FC" >&5 $as_echo "$lt_cv_prog_compiler_c_o_FC" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o_FC+:} false; then : +if test "${lt_cv_prog_compiler_c_o_FC+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_FC=no @@ -17846,16 +19289,16 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:19292: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:19296: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_FC=yes @@ -17872,7 +19315,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_FC" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_FC" >&5 $as_echo "$lt_cv_prog_compiler_c_o_FC" >&6; } @@ -17881,7 +19324,7 @@ hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_FC" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 + { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* @@ -17889,10 +19332,10 @@ touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 + { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi @@ -17902,7 +19345,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 + { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= @@ -17965,33 +19408,7 @@ esac ld_shlibs_FC=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' @@ -18009,7 +19426,6 @@ fi supports_anon_versioning=no case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... @@ -18025,12 +19441,11 @@ ld_shlibs_FC=no cat <<_LT_EOF 1>&2 -*** Warning: the GNU linker, at least up to release 2.19, is reported +*** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. _LT_EOF fi @@ -18066,12 +19481,10 @@ # _LT_TAGVAR(hardcode_libdir_flag_spec, FC) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_FC='-L$libdir' - export_dynamic_flag_spec_FC='${wl}--export-all-symbols' allow_undefined_flag_FC=unsupported always_export_symbols_FC=no enable_shared_with_static_runtimes_FC=yes - export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms_FC='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' @@ -18089,11 +19502,6 @@ fi ;; - haiku*) - archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - link_all_deplibs_FC=yes - ;; - interix[3-9]*) hardcode_direct_FC=no hardcode_shlibpath_var_FC=no @@ -18109,7 +19517,7 @@ archive_expsym_cmds_FC='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + gnu* | linux* | tpf* | k*bsd*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in @@ -18119,16 +19527,15 @@ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then - tmp_addflag=' $pic_flag' + tmp_addflag= tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -18139,17 +19546,13 @@ lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec_FC= tmp_sharedflag='--shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object_FC=yes - ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec_FC='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec_FC='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object_FC=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 @@ -18165,17 +19568,17 @@ fi case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) + xlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec_FC='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec_FC= hardcode_libdir_flag_spec_ld_FC='-rpath $libdir' - archive_cmds_FC='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + archive_cmds_FC='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds_FC='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac @@ -18189,8 +19592,8 @@ archive_cmds_FC='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -18208,8 +19611,8 @@ _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_FC=no fi @@ -18255,8 +19658,8 @@ *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs_FC=no fi @@ -18296,10 +19699,8 @@ else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds_FC='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds_FC='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_FC='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi @@ -18386,45 +19787,59 @@ allow_undefined_flag_FC='-berok' # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath__FC+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat > conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF program main end _ACEOF -if ac_fn_fc_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_fc_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath__FC=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath__FC"; then - lt_cv_aix_libpath__FC=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath__FC"; then - lt_cv_aix_libpath__FC="/usr/lib:/lib" - fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -fi - aix_libpath=$lt_cv_aix_libpath__FC fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_FC='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + archive_expsym_cmds_FC='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_FC='${wl}-R $libdir:/usr/lib:/lib' @@ -18433,55 +19848,64 @@ else # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath__FC+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat > conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF program main end _ACEOF -if ac_fn_fc_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_fc_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath__FC=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath__FC"; then - lt_cv_aix_libpath__FC=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath__FC"; then - lt_cv_aix_libpath__FC="/usr/lib:/lib" - fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -fi - aix_libpath=$lt_cv_aix_libpath__FC fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_FC=' ${wl}-bernotok' allow_undefined_flag_FC=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec_FC='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_FC='$convenience' - fi + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_FC='$convenience' archive_cmds_need_lc_FC=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' @@ -18513,63 +19937,20 @@ # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - hardcode_libdir_flag_spec_FC=' ' - allow_undefined_flag_FC=unsupported - always_export_symbols_FC=yes - file_list_spec_FC='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_FC='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds_FC='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, FC)='true' - enable_shared_with_static_runtimes_FC=yes - export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - old_postinstall_cmds_FC='chmod 644 $oldlib' - postlink_cmds_FC='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - hardcode_libdir_flag_spec_FC=' ' - allow_undefined_flag_FC=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_FC='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds_FC='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds_FC='lib -OUT:$oldlib$oldobjs$old_deplibs' - enable_shared_with_static_runtimes_FC=yes - ;; - esac + hardcode_libdir_flag_spec_FC=' ' + allow_undefined_flag_FC=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_FC='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds_FC='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds_FC='lib -OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path_FC='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes_FC=yes ;; darwin* | rhapsody*) @@ -18579,11 +19960,7 @@ hardcode_direct_FC=no hardcode_automatic_FC=yes hardcode_shlibpath_var_FC=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec_FC='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - else - whole_archive_flag_spec_FC='' - fi + whole_archive_flag_spec_FC='' link_all_deplibs_FC=yes allow_undefined_flag_FC="$_lt_dar_allow_undefined" case $cc_basename in @@ -18591,7 +19968,7 @@ *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all + output_verbose_link_cmd=echo archive_cmds_FC="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_FC="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_FC="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" @@ -18634,7 +20011,7 @@ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) - archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_FC='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec_FC='-R$libdir' hardcode_direct_FC=yes hardcode_shlibpath_var_FC=no @@ -18642,7 +20019,7 @@ hpux9*) if test "$GCC" = yes; then - archive_cmds_FC='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds_FC='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds_FC='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi @@ -18657,8 +20034,8 @@ ;; hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + archive_cmds_FC='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds_FC='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi @@ -18676,16 +20053,16 @@ ;; hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then + if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds_FC='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_FC='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_FC='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else @@ -18697,7 +20074,7 @@ archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi @@ -18725,40 +20102,52 @@ irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then - archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -if ${lt_cv_irix_exported_symbol+:} false; then : - $as_echo_n "(cached) " >&6 -else - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - cat > conftest.$ac_ext <<_ACEOF - - subroutine foo - end + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat >conftest.$ac_ext <<_ACEOF +int foo(void) {} _ACEOF -if ac_fn_fc_try_link "$LINENO"; then : - lt_cv_irix_exported_symbol=yes +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_fc_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + else - lt_cv_irix_exported_symbol=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -$as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test "$lt_cv_irix_exported_symbol" = yes; then - archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" else - archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc_FC='no' hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' @@ -18820,17 +20209,17 @@ hardcode_libdir_flag_spec_FC='-L$libdir' hardcode_minus_L_FC=yes allow_undefined_flag_FC=unsupported - archive_cmds_FC='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + archive_cmds_FC='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds_FC='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag_FC=' -expect_unresolved \*' - archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' fi archive_cmds_need_lc_FC='no' hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' @@ -18840,13 +20229,13 @@ osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_FC='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' else allow_undefined_flag_FC=' -expect_unresolved \*' - archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_FC='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec_FC='-rpath $libdir' @@ -18859,9 +20248,9 @@ no_undefined_flag_FC=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' - archive_cmds_FC='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds_FC='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) @@ -19010,7 +20399,7 @@ fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_FC" >&5 +{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_FC" >&5 $as_echo "$ld_shlibs_FC" >&6; } test "$ld_shlibs_FC" = no && can_build_shared=no @@ -19038,52 +20427,46 @@ # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 + { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc_FC+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_FC - pic_flag=$lt_prog_compiler_pic_FC - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_FC - allow_undefined_flag_FC= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_FC 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_FC + pic_flag=$lt_prog_compiler_pic_FC + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_FC + allow_undefined_flag_FC= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_FC 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds_FC 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc_FC=no - else - lt_cv_archive_cmds_need_lc_FC=yes - fi - allow_undefined_flag_FC=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_FC" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc_FC" >&6; } - archive_cmds_need_lc_FC=$lt_cv_archive_cmds_need_lc_FC + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_FC=no + else + archive_cmds_need_lc_FC=yes + fi + allow_undefined_flag_FC=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_FC" >&5 +$as_echo "$archive_cmds_need_lc_FC" >&6; } ;; esac fi @@ -19153,7 +20536,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 + { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } library_names_spec= @@ -19240,7 +20623,7 @@ m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; @@ -19271,9 +20654,8 @@ need_version=no need_lib_prefix=no - case $GCC,$cc_basename in - yes,*) - # gcc + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ @@ -19294,82 +20676,36 @@ cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' ;; *) - # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' ;; esac + dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; @@ -19455,19 +20791,6 @@ hardcode_into_libs=yes ;; -haiku*) - version_type=linux - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. @@ -19510,10 +20833,8 @@ soname_spec='${libname}${release}${shared_ext}$major' ;; esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 ;; interix[3-9]*) @@ -19571,7 +20892,7 @@ ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -19580,34 +20901,53 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : - $as_echo_n "(cached) " >&6 + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_FC\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_FC\"" + cat >conftest.$ac_ext <<_ACEOF + program main + + end +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_fc_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then + shlibpath_overrides_runpath=yes +fi + else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_FC\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_FC\"" - cat > conftest.$ac_ext <<_ACEOF - program main + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - end -_ACEOF -if ac_fn_fc_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir fi - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install @@ -19619,9 +20959,8 @@ # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -19821,7 +21160,7 @@ dynamic_linker=no ;; esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no @@ -19872,9 +21211,7 @@ - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 + { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action_FC= if test -n "$hardcode_libdir_flag_spec_FC" || @@ -19899,7 +21236,7 @@ # directories. hardcode_action_FC=unsupported fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_FC" >&5 +{ $as_echo "$as_me:$LINENO: result: $hardcode_action_FC" >&5 $as_echo "$hardcode_action_FC" >&6; } if test "$hardcode_action_FC" = relink || @@ -19921,8 +21258,7 @@ fi # test -n "$compiler" GCC=$lt_save_GCC - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS + CC="$lt_save_CC" fi # test "$_lt_disable_FC" != yes ac_ext=c @@ -19933,27 +21269,46 @@ if test "x$FC" == "x"; then - as_fn_error $? "Fortran compiler required to build PxCone but not found or not functional" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: Fortran compiler required to build PxCone but not found or not functional" >&5 +$as_echo "$as_me: error: Fortran compiler required to build PxCone but not found or not functional" >&2;} + { (exit 1); exit 1; }; } fi ac_ext=${ac_fc_srcext-f} ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_fc_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to get verbose linking output from $FC" >&5 +{ $as_echo "$as_me:$LINENO: checking how to get verbose linking output from $FC" >&5 $as_echo_n "checking how to get verbose linking output from $FC... " >&6; } -if ${ac_cv_prog_fc_v+:} false; then : +if test "${ac_cv_prog_fc_v+set}" = set; then $as_echo_n "(cached) " >&6 else - cat > conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF program main end _ACEOF -if ac_fn_fc_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_fc_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_fc_v= # Try some options frequently used verbose output for ac_verb in -v -verbose --verbose -V -\#\#\#; do - cat > conftest.$ac_ext <<_ACEOF + cat >conftest.$ac_ext <<_ACEOF program main end @@ -19963,18 +21318,17 @@ # 1 to this macro) to the Fortran compiler in order to get # "verbose" output that we can then parse for the Fortran linker # flags. -ac_save_FCFLAGS=$FCFLAGS +ac_save_FFLAGS=$FCFLAGS FCFLAGS="$FCFLAGS $ac_verb" eval "set x $ac_link" shift -$as_echo "$as_me:${as_lineno-$LINENO}: $*" >&5 +$as_echo "$as_me:$LINENO: $*" >&5 # gfortran 4.3 outputs lines setting COLLECT_GCC_OPTIONS, COMPILER_PATH, # LIBRARY_PATH; skip all such settings. ac_fc_v_output=`eval $ac_link 5>&1 2>&1 | - sed '/^Driving:/d; /^Configured with:/d; - '"/^[_$as_cr_Letters][_$as_cr_alnum]*=/d"` + grep -v 'Driving:' | grep -v "^[_$as_cr_Letters][_$as_cr_alnum]*="` $as_echo "$ac_fc_v_output" >&5 -FCFLAGS=$ac_save_FCFLAGS +FCFLAGS=$ac_save_FFLAGS rm -rf conftest* @@ -20003,9 +21357,9 @@ # Doubly-quoted arguments were reported for "PGF90/x86 Linux/x86 5.0-2". *-cmdline\ * | *-ignore\ * | *-def\ *) ac_fc_v_output=`echo $ac_fc_v_output | sed "\ - s/-cmdline *'[^']*'/ /g; s/-cmdline *\"[^\"]*\"/ /g - s/-ignore *'[^']*'/ /g; s/-ignore *\"[^\"]*\"/ /g - s/-def *'[^']*'/ /g; s/-def *\"[^\"]*\"/ /g"` ;; + s/-cmdline *'[^']*'/ /g; s/-cmdline *\"[^\"]*\"/ /g + s/-ignore *'[^']*'/ /g; s/-ignore *\"[^\"]*\"/ /g + s/-def *'[^']*'/ /g; s/-def *\"[^\"]*\"/ /g"` ;; # If we are using Cray Fortran then delete quotes. *cft90*) @@ -20016,35 +21370,39 @@ # look for -l* and *.a constructs in the output for ac_arg in $ac_fc_v_output; do case $ac_arg in - [\\/]*.a | ?:[\\/]*.a | -[lLRu]*) - ac_cv_prog_fc_v=$ac_verb - break 2 ;; + [\\/]*.a | ?:[\\/]*.a | -[lLRu]*) + ac_cv_prog_fc_v=$ac_verb + break 2 ;; esac done done if test -z "$ac_cv_prog_fc_v"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot determine how to obtain linking information from $FC" >&5 + { $as_echo "$as_me:$LINENO: WARNING: cannot determine how to obtain linking information from $FC" >&5 $as_echo "$as_me: WARNING: cannot determine how to obtain linking information from $FC" >&2;} fi else - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: compilation failed" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + { $as_echo "$as_me:$LINENO: WARNING: compilation failed" >&5 $as_echo "$as_me: WARNING: compilation failed" >&2;} fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_fc_v" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_fc_v" >&5 $as_echo "$ac_cv_prog_fc_v" >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran libraries of $FC" >&5 +{ $as_echo "$as_me:$LINENO: checking for Fortran libraries of $FC" >&5 $as_echo_n "checking for Fortran libraries of $FC... " >&6; } -if ${ac_cv_fc_libs+:} false; then : +if test "${ac_cv_fc_libs+set}" = set; then $as_echo_n "(cached) " >&6 else if test "x$FCLIBS" != "x"; then ac_cv_fc_libs="$FCLIBS" # Let the user override the test. else -cat > conftest.$ac_ext <<_ACEOF +cat >conftest.$ac_ext <<_ACEOF program main end @@ -20054,18 +21412,17 @@ # 1 to this macro) to the Fortran compiler in order to get # "verbose" output that we can then parse for the Fortran linker # flags. -ac_save_FCFLAGS=$FCFLAGS +ac_save_FFLAGS=$FCFLAGS FCFLAGS="$FCFLAGS $ac_cv_prog_fc_v" eval "set x $ac_link" shift -$as_echo "$as_me:${as_lineno-$LINENO}: $*" >&5 +$as_echo "$as_me:$LINENO: $*" >&5 # gfortran 4.3 outputs lines setting COLLECT_GCC_OPTIONS, COMPILER_PATH, # LIBRARY_PATH; skip all such settings. ac_fc_v_output=`eval $ac_link 5>&1 2>&1 | - sed '/^Driving:/d; /^Configured with:/d; - '"/^[_$as_cr_Letters][_$as_cr_alnum]*=/d"` + grep -v 'Driving:' | grep -v "^[_$as_cr_Letters][_$as_cr_alnum]*="` $as_echo "$ac_fc_v_output" >&5 -FCFLAGS=$ac_save_FCFLAGS +FCFLAGS=$ac_save_FFLAGS rm -rf conftest* @@ -20094,9 +21451,9 @@ # Doubly-quoted arguments were reported for "PGF90/x86 Linux/x86 5.0-2". *-cmdline\ * | *-ignore\ * | *-def\ *) ac_fc_v_output=`echo $ac_fc_v_output | sed "\ - s/-cmdline *'[^']*'/ /g; s/-cmdline *\"[^\"]*\"/ /g - s/-ignore *'[^']*'/ /g; s/-ignore *\"[^\"]*\"/ /g - s/-def *'[^']*'/ /g; s/-def *\"[^\"]*\"/ /g"` ;; + s/-cmdline *'[^']*'/ /g; s/-cmdline *\"[^\"]*\"/ /g + s/-ignore *'[^']*'/ /g; s/-ignore *\"[^\"]*\"/ /g + s/-def *'[^']*'/ /g; s/-def *\"[^\"]*\"/ /g"` ;; # If we are using Cray Fortran then delete quotes. *cft90*) @@ -20115,8 +21472,8 @@ shift ac_arg=$1 case $ac_arg in - [\\/]*.a | ?:[\\/]*.a) - ac_exists=false + [\\/]*.a | ?:[\\/]*.a) + ac_exists=false for ac_i in $ac_cv_fc_libs; do if test x"$ac_arg" = x"$ac_i"; then ac_exists=true @@ -20124,14 +21481,15 @@ fi done - if test x"$ac_exists" = xtrue; then : - + if test x"$ac_exists" = xtrue; then + : else ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" fi - ;; - -bI:*) - ac_exists=false + + ;; + -bI:*) + ac_exists=false for ac_i in $ac_cv_fc_libs; do if test x"$ac_arg" = x"$ac_i"; then ac_exists=true @@ -20139,8 +21497,8 @@ fi done - if test x"$ac_exists" = xtrue; then : - + if test x"$ac_exists" = xtrue; then + : else if test "$ac_compiler_gnu" = yes; then for ac_link_opt in $ac_arg; do @@ -20150,18 +21508,18 @@ ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" fi fi - ;; - # Ignore these flags. - -lang* | -lcrt*.o | -lc | -lgcc* | -lSystem | -libmil | -little \ - |-LANG:=* | -LIST:* | -LNO:* | -link) - ;; - -lkernel32) - test x"$CYGWIN" != xyes && ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" - ;; - -[LRuYz]) - # These flags, when seen by themselves, take an argument. - # We remove the space between option and argument and re-iterate - # unless we find an empty arg or a new option (starting with -) + + ;; + # Ignore these flags. + -lang* | -lcrt*.o | -lc | -lgcc* | -lSystem | -libmil | -LANG:=* | -LIST:* | -LNO:*) + ;; + -lkernel32) + test x"$CYGWIN" != xyes && ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" + ;; + -[LRuYz]) + # These flags, when seen by themselves, take an argument. + # We remove the space between option and argument and re-iterate + # unless we find an empty arg or a new option (starting with -) case $2 in "" | -*);; *) @@ -20170,10 +21528,10 @@ set X $ac_arg "$@" ;; esac - ;; - -YP,*) - for ac_j in `$as_echo "$ac_arg" | sed -e 's/-YP,/-L/;s/:/ -L/g'`; do - ac_exists=false + ;; + -YP,*) + for ac_j in `$as_echo "$ac_arg" | sed -e 's/-YP,/-L/;s/:/ -L/g'`; do + ac_exists=false for ac_i in $ac_cv_fc_libs; do if test x"$ac_j" = x"$ac_i"; then ac_exists=true @@ -20181,16 +21539,17 @@ fi done - if test x"$ac_exists" = xtrue; then : - + if test x"$ac_exists" = xtrue; then + : else ac_arg="$ac_arg $ac_j" - ac_cv_fc_libs="$ac_cv_fc_libs $ac_j" + ac_cv_fc_libs="$ac_cv_fc_libs $ac_j" fi - done - ;; - -[lLR]*) - ac_exists=false + + done + ;; + -[lLR]*) + ac_exists=false for ac_i in $ac_cv_fc_libs; do if test x"$ac_arg" = x"$ac_i"; then ac_exists=true @@ -20198,16 +21557,17 @@ fi done - if test x"$ac_exists" = xtrue; then : - + if test x"$ac_exists" = xtrue; then + : else ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" fi - ;; + + ;; -zallextract*| -zdefaultextract) ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" ;; - # Ignore everything else. + # Ignore everything else. esac done # restore positional arguments @@ -20219,9 +21579,9 @@ case `(uname -sr) 2>/dev/null` in "SunOS 5"*) ac_ld_run_path=`$as_echo "$ac_fc_v_output" | - sed -n 's,^.*LD_RUN_PATH *= *\(/[^ ]*\).*$,-R\1,p'` + sed -n 's,^.*LD_RUN_PATH *= *\(/[^ ]*\).*$,-R\1,p'` test "x$ac_ld_run_path" != x && - if test "$ac_compiler_gnu" = yes; then + if test "$ac_compiler_gnu" = yes; then for ac_link_opt in $ac_ld_run_path; do ac_cv_fc_libs="$ac_cv_fc_libs -Xlinker $ac_link_opt" done @@ -20233,7 +21593,7 @@ fi # test "x$[]_AC_LANG_PREFIX[]LIBS" = "x" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_libs" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_fc_libs" >&5 $as_echo "$ac_cv_fc_libs" >&6; } FCLIBS="$ac_cv_fc_libs" @@ -20267,7 +21627,7 @@ if [ "x$ENABLE_D0RUNIICONE" == "xyes" ] ; then # check if the compiler supports -fno-inline - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CXX supports -fno-inline" >&5 + { $as_echo "$as_me:$LINENO: checking if $CXX supports -fno-inline" >&5 $as_echo_n "checking if $CXX supports -fno-inline... " >&6; } SAVE_CXXFLAGS="$CXXFLAGS" CXXFLAGS="-Werror -fno-inline" @@ -20277,17 +21637,46 @@ ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main(void){ return 0;} _ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_support_no_inline=yes else - ac_support_no_inline=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_support_no_inline=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -20295,7 +21684,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu CXXFLAGS="$SAVE_CXXFLAGS" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_support_no_inline" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_support_no_inline" >&5 $as_echo "$ac_support_no_inline" >&6; } D0_CXXFLAGS="" @@ -20399,13 +21788,13 @@ case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; + *) $as_unset $ac_var ;; esac ;; esac done @@ -20413,8 +21802,8 @@ (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" @@ -20436,23 +21825,12 @@ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 + test "x$cache_file" != "x/dev/null" && + { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi + cat confcache >$cache_file else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 + { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi @@ -20466,15 +21844,14 @@ ac_libobjs= ac_ltlibobjs= -U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs @@ -20490,78 +21867,132 @@ fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${MONOLITHIC_PLUGINS_TRUE}" && test -z "${MONOLITHIC_PLUGINS_FALSE}"; then - as_fn_error $? "conditional \"MONOLITHIC_PLUGINS\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"MONOLITHIC_PLUGINS\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"MONOLITHIC_PLUGINS\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${BUILD_PLUGIN_SISCONE_TRUE}" && test -z "${BUILD_PLUGIN_SISCONE_FALSE}"; then - as_fn_error $? "conditional \"BUILD_PLUGIN_SISCONE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_PLUGIN_SISCONE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"BUILD_PLUGIN_SISCONE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${BUILD_PLUGIN_CDFCONES_TRUE}" && test -z "${BUILD_PLUGIN_CDFCONES_FALSE}"; then - as_fn_error $? "conditional \"BUILD_PLUGIN_CDFCONES\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_PLUGIN_CDFCONES\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"BUILD_PLUGIN_CDFCONES\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${BUILD_PLUGIN_PXCONE_TRUE}" && test -z "${BUILD_PLUGIN_PXCONE_FALSE}"; then - as_fn_error $? "conditional \"BUILD_PLUGIN_PXCONE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_PLUGIN_PXCONE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"BUILD_PLUGIN_PXCONE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${BUILD_PLUGIN_D0RUNIICONE_TRUE}" && test -z "${BUILD_PLUGIN_D0RUNIICONE_FALSE}"; then - as_fn_error $? "conditional \"BUILD_PLUGIN_D0RUNIICONE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_PLUGIN_D0RUNIICONE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"BUILD_PLUGIN_D0RUNIICONE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${BUILD_PLUGIN_NESTEDDEFS_TRUE}" && test -z "${BUILD_PLUGIN_NESTEDDEFS_FALSE}"; then - as_fn_error $? "conditional \"BUILD_PLUGIN_NESTEDDEFS\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_PLUGIN_NESTEDDEFS\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"BUILD_PLUGIN_NESTEDDEFS\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${BUILD_PLUGIN_TRACKJET_TRUE}" && test -z "${BUILD_PLUGIN_TRACKJET_FALSE}"; then - as_fn_error $? "conditional \"BUILD_PLUGIN_TRACKJET\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_PLUGIN_TRACKJET\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"BUILD_PLUGIN_TRACKJET\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${BUILD_PLUGIN_ATLASCONE_TRUE}" && test -z "${BUILD_PLUGIN_ATLASCONE_FALSE}"; then - as_fn_error $? "conditional \"BUILD_PLUGIN_ATLASCONE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_PLUGIN_ATLASCONE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"BUILD_PLUGIN_ATLASCONE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${BUILD_PLUGIN_CMSITERATIVECONE_TRUE}" && test -z "${BUILD_PLUGIN_CMSITERATIVECONE_FALSE}"; then - as_fn_error $? "conditional \"BUILD_PLUGIN_CMSITERATIVECONE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_PLUGIN_CMSITERATIVECONE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"BUILD_PLUGIN_CMSITERATIVECONE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${BUILD_PLUGIN_EECAMBRIDGE_TRUE}" && test -z "${BUILD_PLUGIN_EECAMBRIDGE_FALSE}"; then - as_fn_error $? "conditional \"BUILD_PLUGIN_EECAMBRIDGE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_PLUGIN_EECAMBRIDGE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"BUILD_PLUGIN_EECAMBRIDGE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${BUILD_PLUGIN_JADE_TRUE}" && test -z "${BUILD_PLUGIN_JADE_FALSE}"; then - as_fn_error $? "conditional \"BUILD_PLUGIN_JADE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_PLUGIN_JADE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"BUILD_PLUGIN_JADE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${BUILD_PLUGIN_D0RUNICONE_TRUE}" && test -z "${BUILD_PLUGIN_D0RUNICONE_FALSE}"; then - as_fn_error $? "conditional \"BUILD_PLUGIN_D0RUNICONE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_PLUGIN_D0RUNICONE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"BUILD_PLUGIN_D0RUNICONE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${BUILD_PLUGIN_GRIDJET_TRUE}" && test -z "${BUILD_PLUGIN_GRIDJET_FALSE}"; then - as_fn_error $? "conditional \"BUILD_PLUGIN_GRIDJET\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"BUILD_PLUGIN_GRIDJET\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"BUILD_PLUGIN_GRIDJET\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi -: "${CONFIG_STATUS=./config.status}" +: ${CONFIG_STATUS=./config.status} ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. @@ -20571,18 +22002,17 @@ debug=false ac_cs_recheck=false ac_cs_silent=false - SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which @@ -20590,15 +22020,23 @@ alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; esac + fi + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + as_nl=' ' export as_nl @@ -20606,13 +22044,7 @@ as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else @@ -20623,7 +22055,7 @@ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; - case $arg in #( + case $arg in *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; @@ -20646,6 +22078,13 @@ } fi +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + # IFS # We need space, tab and new line, in precisely that order. Quoting is @@ -20655,16 +22094,15 @@ IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( +case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done IFS=$as_save_IFS ;; @@ -20676,16 +22114,12 @@ fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 + { (exit 1); exit 1; } fi -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' @@ -20697,89 +22131,7 @@ LANGUAGE=C export LANGUAGE -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - +# Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr @@ -20793,12 +22145,8 @@ as_basename=false fi -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi +# Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ @@ -20818,25 +22166,76 @@ } s/.*/./; q'` -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits +# CDPATH. +$as_unset CDPATH + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( +case `echo -n x` in -n*) - case `echo 'xy\c'` in + case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; + *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then @@ -20865,56 +22264,8 @@ rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' + as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false @@ -20933,10 +22284,10 @@ if test -d "$1"; then test -d "$1/."; else - case $1 in #( + case $1 in -*)set "./$1";; esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' @@ -20951,19 +22302,13 @@ exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to +# Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by FastJet $as_me 3.0.3, which was -generated by GNU Autoconf 2.68. Invocation command line was +This file was extended by FastJet $as_me 3.0.6, which was +generated by GNU Autoconf 2.63. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -20995,15 +22340,13 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. +\`$as_me' instantiates files from templates according to the +current configuration. -Usage: $0 [OPTION]... [TAG]... +Usage: $0 [OPTION]... [FILE]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit - --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files @@ -21022,17 +22365,16 @@ Configuration commands: $config_commands -Report bugs to the package provider." +Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -FastJet config.status 3.0.3 -configured by $0, generated by GNU Autoconf 2.68, - with options \\"\$ac_cs_config\\" +FastJet config.status 3.0.6 +configured by $0, generated by GNU Autoconf 2.63, + with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" -Copyright (C) 2010 Free Software Foundation, Inc. +Copyright (C) 2008 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -21050,16 +22392,11 @@ while test $# != 0 do case $1 in - --*=?*) + --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; *) ac_option=$1 ac_optarg=$2 @@ -21073,29 +22410,27 @@ ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; esac - as_fn_append CONFIG_FILES " '$ac_optarg'" + CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" + CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; + { $as_echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; };; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ @@ -21103,10 +22438,11 @@ ac_cs_silent=: ;; # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; + -*) { $as_echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; - *) as_fn_append ac_config_targets " $1" + *) ac_config_targets="$ac_config_targets $1" ac_need_defaults=false ;; esac @@ -21158,257 +22494,231 @@ sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' -enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' -lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' -reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' -want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' -DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' -sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' -AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' -STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' -lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' -objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' -compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`' -predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`' -postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`' -predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`' -postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`' -compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`' -LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`' -LD_FC='`$ECHO "$LD_FC" | $SED "$delay_single_quote_subst"`' -reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`' -reload_flag_FC='`$ECHO "$reload_flag_FC" | $SED "$delay_single_quote_subst"`' -reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`' -reload_cmds_FC='`$ECHO "$reload_cmds_FC" | $SED "$delay_single_quote_subst"`' -old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' -old_archive_cmds_FC='`$ECHO "$old_archive_cmds_FC" | $SED "$delay_single_quote_subst"`' -compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`' -compiler_FC='`$ECHO "$compiler_FC" | $SED "$delay_single_quote_subst"`' -GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`' -GCC_FC='`$ECHO "$GCC_FC" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag_FC='`$ECHO "$lt_prog_compiler_no_builtin_flag_FC" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic_FC='`$ECHO "$lt_prog_compiler_pic_FC" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl_FC='`$ECHO "$lt_prog_compiler_wl_FC" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static_FC='`$ECHO "$lt_prog_compiler_static_FC" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o_FC='`$ECHO "$lt_cv_prog_compiler_c_o_FC" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc_FC='`$ECHO "$archive_cmds_need_lc_FC" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes_FC='`$ECHO "$enable_shared_with_static_runtimes_FC" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec_FC='`$ECHO "$export_dynamic_flag_spec_FC" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec_FC='`$ECHO "$whole_archive_flag_spec_FC" | $SED "$delay_single_quote_subst"`' -compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`' -compiler_needs_object_FC='`$ECHO "$compiler_needs_object_FC" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds_FC='`$ECHO "$old_archive_from_new_cmds_FC" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds_FC='`$ECHO "$old_archive_from_expsyms_cmds_FC" | $SED "$delay_single_quote_subst"`' -archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' -archive_cmds_FC='`$ECHO "$archive_cmds_FC" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds_FC='`$ECHO "$archive_expsym_cmds_FC" | $SED "$delay_single_quote_subst"`' -module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`' -module_cmds_FC='`$ECHO "$module_cmds_FC" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds_FC='`$ECHO "$module_expsym_cmds_FC" | $SED "$delay_single_quote_subst"`' -with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`' -with_gnu_ld_FC='`$ECHO "$with_gnu_ld_FC" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag_FC='`$ECHO "$allow_undefined_flag_FC" | $SED "$delay_single_quote_subst"`' -no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' -no_undefined_flag_FC='`$ECHO "$no_undefined_flag_FC" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_FC='`$ECHO "$hardcode_libdir_flag_spec_FC" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld_CXX='`$ECHO "$hardcode_libdir_flag_spec_ld_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld_FC='`$ECHO "$hardcode_libdir_flag_spec_ld_FC" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator_FC='`$ECHO "$hardcode_libdir_separator_FC" | $SED "$delay_single_quote_subst"`' -hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_direct_FC='`$ECHO "$hardcode_direct_FC" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute_FC='`$ECHO "$hardcode_direct_absolute_FC" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L_FC='`$ECHO "$hardcode_minus_L_FC" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var_FC='`$ECHO "$hardcode_shlibpath_var_FC" | $SED "$delay_single_quote_subst"`' -hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_automatic_FC='`$ECHO "$hardcode_automatic_FC" | $SED "$delay_single_quote_subst"`' -inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`' -inherit_rpath_FC='`$ECHO "$inherit_rpath_FC" | $SED "$delay_single_quote_subst"`' -link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`' -link_all_deplibs_FC='`$ECHO "$link_all_deplibs_FC" | $SED "$delay_single_quote_subst"`' -always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`' -always_export_symbols_FC='`$ECHO "$always_export_symbols_FC" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds_FC='`$ECHO "$export_symbols_cmds_FC" | $SED "$delay_single_quote_subst"`' -exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`' -exclude_expsyms_FC='`$ECHO "$exclude_expsyms_FC" | $SED "$delay_single_quote_subst"`' -include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`' -include_expsyms_FC='`$ECHO "$include_expsyms_FC" | $SED "$delay_single_quote_subst"`' -prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`' -prelink_cmds_FC='`$ECHO "$prelink_cmds_FC" | $SED "$delay_single_quote_subst"`' -postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`' -postlink_cmds_FC='`$ECHO "$postlink_cmds_FC" | $SED "$delay_single_quote_subst"`' -file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`' -file_list_spec_FC='`$ECHO "$file_list_spec_FC" | $SED "$delay_single_quote_subst"`' -hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_action_FC='`$ECHO "$hardcode_action_FC" | $SED "$delay_single_quote_subst"`' -compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`' -compiler_lib_search_dirs_FC='`$ECHO "$compiler_lib_search_dirs_FC" | $SED "$delay_single_quote_subst"`' -predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`' -predep_objects_FC='`$ECHO "$predep_objects_FC" | $SED "$delay_single_quote_subst"`' -postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`' -postdep_objects_FC='`$ECHO "$postdep_objects_FC" | $SED "$delay_single_quote_subst"`' -predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`' -predeps_FC='`$ECHO "$predeps_FC" | $SED "$delay_single_quote_subst"`' -postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`' -postdeps_FC='`$ECHO "$postdeps_FC" | $SED "$delay_single_quote_subst"`' -compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`' -compiler_lib_search_path_FC='`$ECHO "$compiler_lib_search_path_FC" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' +macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' +macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' +enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' +pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' +host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' +host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' +host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' +build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' +build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' +build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' +SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' +Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' +GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' +EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' +FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' +LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' +NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' +LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' +ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' +exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' +lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' +reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' +AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' +STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' +RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' +compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' +GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' +SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' +ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' +need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' +LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' +libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' +fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' +version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' +runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' +libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' +soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' +old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' +striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' +compiler_lib_search_dirs='`$ECHO "X$compiler_lib_search_dirs" | $Xsed -e "$delay_single_quote_subst"`' +predep_objects='`$ECHO "X$predep_objects" | $Xsed -e "$delay_single_quote_subst"`' +postdep_objects='`$ECHO "X$postdep_objects" | $Xsed -e "$delay_single_quote_subst"`' +predeps='`$ECHO "X$predeps" | $Xsed -e "$delay_single_quote_subst"`' +postdeps='`$ECHO "X$postdeps" | $Xsed -e "$delay_single_quote_subst"`' +compiler_lib_search_path='`$ECHO "X$compiler_lib_search_path" | $Xsed -e "$delay_single_quote_subst"`' +LD_CXX='`$ECHO "X$LD_CXX" | $Xsed -e "$delay_single_quote_subst"`' +LD_FC='`$ECHO "X$LD_FC" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_cmds_CXX='`$ECHO "X$old_archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_cmds_FC='`$ECHO "X$old_archive_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`' +compiler_CXX='`$ECHO "X$compiler_CXX" | $Xsed -e "$delay_single_quote_subst"`' +compiler_FC='`$ECHO "X$compiler_FC" | $Xsed -e "$delay_single_quote_subst"`' +GCC_CXX='`$ECHO "X$GCC_CXX" | $Xsed -e "$delay_single_quote_subst"`' +GCC_FC='`$ECHO "X$GCC_FC" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "X$lt_prog_compiler_no_builtin_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag_FC='`$ECHO "X$lt_prog_compiler_no_builtin_flag_FC" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_wl_CXX='`$ECHO "X$lt_prog_compiler_wl_CXX" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_wl_FC='`$ECHO "X$lt_prog_compiler_wl_FC" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_pic_CXX='`$ECHO "X$lt_prog_compiler_pic_CXX" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_pic_FC='`$ECHO "X$lt_prog_compiler_pic_FC" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_static_CXX='`$ECHO "X$lt_prog_compiler_static_CXX" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_static_FC='`$ECHO "X$lt_prog_compiler_static_FC" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o_CXX='`$ECHO "X$lt_cv_prog_compiler_c_o_CXX" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o_FC='`$ECHO "X$lt_cv_prog_compiler_c_o_FC" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds_need_lc_CXX='`$ECHO "X$archive_cmds_need_lc_CXX" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds_need_lc_FC='`$ECHO "X$archive_cmds_need_lc_FC" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes_CXX='`$ECHO "X$enable_shared_with_static_runtimes_CXX" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes_FC='`$ECHO "X$enable_shared_with_static_runtimes_FC" | $Xsed -e "$delay_single_quote_subst"`' +export_dynamic_flag_spec_CXX='`$ECHO "X$export_dynamic_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' +export_dynamic_flag_spec_FC='`$ECHO "X$export_dynamic_flag_spec_FC" | $Xsed -e "$delay_single_quote_subst"`' +whole_archive_flag_spec_CXX='`$ECHO "X$whole_archive_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' +whole_archive_flag_spec_FC='`$ECHO "X$whole_archive_flag_spec_FC" | $Xsed -e "$delay_single_quote_subst"`' +compiler_needs_object_CXX='`$ECHO "X$compiler_needs_object_CXX" | $Xsed -e "$delay_single_quote_subst"`' +compiler_needs_object_FC='`$ECHO "X$compiler_needs_object_FC" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_new_cmds_CXX='`$ECHO "X$old_archive_from_new_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_new_cmds_FC='`$ECHO "X$old_archive_from_new_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds_CXX='`$ECHO "X$old_archive_from_expsyms_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds_FC='`$ECHO "X$old_archive_from_expsyms_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds_CXX='`$ECHO "X$archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds_FC='`$ECHO "X$archive_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`' +archive_expsym_cmds_CXX='`$ECHO "X$archive_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +archive_expsym_cmds_FC='`$ECHO "X$archive_expsym_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`' +module_cmds_CXX='`$ECHO "X$module_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +module_cmds_FC='`$ECHO "X$module_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`' +module_expsym_cmds_CXX='`$ECHO "X$module_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +module_expsym_cmds_FC='`$ECHO "X$module_expsym_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`' +with_gnu_ld_CXX='`$ECHO "X$with_gnu_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`' +with_gnu_ld_FC='`$ECHO "X$with_gnu_ld_FC" | $Xsed -e "$delay_single_quote_subst"`' +allow_undefined_flag_CXX='`$ECHO "X$allow_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' +allow_undefined_flag_FC='`$ECHO "X$allow_undefined_flag_FC" | $Xsed -e "$delay_single_quote_subst"`' +no_undefined_flag_CXX='`$ECHO "X$no_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' +no_undefined_flag_FC='`$ECHO "X$no_undefined_flag_FC" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_CXX='`$ECHO "X$hardcode_libdir_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_FC='`$ECHO "X$hardcode_libdir_flag_spec_FC" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld_CXX='`$ECHO "X$hardcode_libdir_flag_spec_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld_FC='`$ECHO "X$hardcode_libdir_flag_spec_ld_FC" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_separator_CXX='`$ECHO "X$hardcode_libdir_separator_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_separator_FC='`$ECHO "X$hardcode_libdir_separator_FC" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct_CXX='`$ECHO "X$hardcode_direct_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct_FC='`$ECHO "X$hardcode_direct_FC" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct_absolute_CXX='`$ECHO "X$hardcode_direct_absolute_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct_absolute_FC='`$ECHO "X$hardcode_direct_absolute_FC" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_minus_L_CXX='`$ECHO "X$hardcode_minus_L_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_minus_L_FC='`$ECHO "X$hardcode_minus_L_FC" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_shlibpath_var_CXX='`$ECHO "X$hardcode_shlibpath_var_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_shlibpath_var_FC='`$ECHO "X$hardcode_shlibpath_var_FC" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_automatic_CXX='`$ECHO "X$hardcode_automatic_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_automatic_FC='`$ECHO "X$hardcode_automatic_FC" | $Xsed -e "$delay_single_quote_subst"`' +inherit_rpath_CXX='`$ECHO "X$inherit_rpath_CXX" | $Xsed -e "$delay_single_quote_subst"`' +inherit_rpath_FC='`$ECHO "X$inherit_rpath_FC" | $Xsed -e "$delay_single_quote_subst"`' +link_all_deplibs_CXX='`$ECHO "X$link_all_deplibs_CXX" | $Xsed -e "$delay_single_quote_subst"`' +link_all_deplibs_FC='`$ECHO "X$link_all_deplibs_FC" | $Xsed -e "$delay_single_quote_subst"`' +fix_srcfile_path_CXX='`$ECHO "X$fix_srcfile_path_CXX" | $Xsed -e "$delay_single_quote_subst"`' +fix_srcfile_path_FC='`$ECHO "X$fix_srcfile_path_FC" | $Xsed -e "$delay_single_quote_subst"`' +always_export_symbols_CXX='`$ECHO "X$always_export_symbols_CXX" | $Xsed -e "$delay_single_quote_subst"`' +always_export_symbols_FC='`$ECHO "X$always_export_symbols_FC" | $Xsed -e "$delay_single_quote_subst"`' +export_symbols_cmds_CXX='`$ECHO "X$export_symbols_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +export_symbols_cmds_FC='`$ECHO "X$export_symbols_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`' +exclude_expsyms_CXX='`$ECHO "X$exclude_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`' +exclude_expsyms_FC='`$ECHO "X$exclude_expsyms_FC" | $Xsed -e "$delay_single_quote_subst"`' +include_expsyms_CXX='`$ECHO "X$include_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`' +include_expsyms_FC='`$ECHO "X$include_expsyms_FC" | $Xsed -e "$delay_single_quote_subst"`' +prelink_cmds_CXX='`$ECHO "X$prelink_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +prelink_cmds_FC='`$ECHO "X$prelink_cmds_FC" | $Xsed -e "$delay_single_quote_subst"`' +file_list_spec_CXX='`$ECHO "X$file_list_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' +file_list_spec_FC='`$ECHO "X$file_list_spec_FC" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_action_CXX='`$ECHO "X$hardcode_action_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_action_FC='`$ECHO "X$hardcode_action_FC" | $Xsed -e "$delay_single_quote_subst"`' +compiler_lib_search_dirs_CXX='`$ECHO "X$compiler_lib_search_dirs_CXX" | $Xsed -e "$delay_single_quote_subst"`' +compiler_lib_search_dirs_FC='`$ECHO "X$compiler_lib_search_dirs_FC" | $Xsed -e "$delay_single_quote_subst"`' +predep_objects_CXX='`$ECHO "X$predep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`' +predep_objects_FC='`$ECHO "X$predep_objects_FC" | $Xsed -e "$delay_single_quote_subst"`' +postdep_objects_CXX='`$ECHO "X$postdep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`' +postdep_objects_FC='`$ECHO "X$postdep_objects_FC" | $Xsed -e "$delay_single_quote_subst"`' +predeps_CXX='`$ECHO "X$predeps_CXX" | $Xsed -e "$delay_single_quote_subst"`' +predeps_FC='`$ECHO "X$predeps_FC" | $Xsed -e "$delay_single_quote_subst"`' +postdeps_CXX='`$ECHO "X$postdeps_CXX" | $Xsed -e "$delay_single_quote_subst"`' +postdeps_FC='`$ECHO "X$postdeps_FC" | $Xsed -e "$delay_single_quote_subst"`' +compiler_lib_search_path_CXX='`$ECHO "X$compiler_lib_search_path_CXX" | $Xsed -e "$delay_single_quote_subst"`' +compiler_lib_search_path_FC='`$ECHO "X$compiler_lib_search_path_FC" | $Xsed -e "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - # Quote evaled strings. -for var in SHELL \ -ECHO \ -SED \ +for var in SED \ GREP \ EGREP \ FGREP \ @@ -21421,13 +22731,8 @@ OBJDUMP \ deplibs_check_method \ file_magic_cmd \ -file_magic_glob \ -want_nocaseglob \ -DLLTOOL \ -sharedlib_from_linklib_cmd \ AR \ AR_FLAGS \ -archiver_list_spec \ STRIP \ RANLIB \ CC \ @@ -21437,14 +22742,14 @@ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -nm_file_list_spec \ +SHELL \ +ECHO \ lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_pic \ lt_prog_compiler_wl \ +lt_prog_compiler_pic \ lt_prog_compiler_static \ lt_cv_prog_compiler_c_o \ need_locks \ -MANIFEST_TOOL \ DSYMUTIL \ NMEDIT \ LIPO \ @@ -21460,6 +22765,7 @@ hardcode_libdir_flag_spec \ hardcode_libdir_flag_spec_ld \ hardcode_libdir_separator \ +fix_srcfile_path \ exclude_expsyms \ include_expsyms \ file_list_spec \ @@ -21467,7 +22773,6 @@ libname_spec \ library_names_spec \ soname_spec \ -install_override_mode \ finish_eval \ old_striplib \ striplib \ @@ -21479,16 +22784,14 @@ compiler_lib_search_path \ LD_CXX \ LD_FC \ -reload_flag_CXX \ -reload_flag_FC \ compiler_CXX \ compiler_FC \ lt_prog_compiler_no_builtin_flag_CXX \ lt_prog_compiler_no_builtin_flag_FC \ -lt_prog_compiler_pic_CXX \ -lt_prog_compiler_pic_FC \ lt_prog_compiler_wl_CXX \ lt_prog_compiler_wl_FC \ +lt_prog_compiler_pic_CXX \ +lt_prog_compiler_pic_FC \ lt_prog_compiler_static_CXX \ lt_prog_compiler_static_FC \ lt_cv_prog_compiler_c_o_CXX \ @@ -21511,6 +22814,8 @@ hardcode_libdir_flag_spec_ld_FC \ hardcode_libdir_separator_CXX \ hardcode_libdir_separator_FC \ +fix_srcfile_path_CXX \ +fix_srcfile_path_FC \ exclude_expsyms_CXX \ exclude_expsyms_FC \ include_expsyms_CXX \ @@ -21529,9 +22834,9 @@ postdeps_FC \ compiler_lib_search_path_CXX \ compiler_lib_search_path_FC; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -21553,14 +22858,11 @@ module_expsym_cmds \ export_symbols_cmds \ prelink_cmds \ -postlink_cmds \ postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ sys_lib_dlsearch_path_spec \ -reload_cmds_CXX \ -reload_cmds_FC \ old_archive_cmds_CXX \ old_archive_cmds_FC \ old_archive_from_new_cmds_CXX \ @@ -21578,12 +22880,10 @@ export_symbols_cmds_CXX \ export_symbols_cmds_FC \ prelink_cmds_CXX \ -prelink_cmds_FC \ -postlink_cmds_CXX \ -postlink_cmds_FC; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in +prelink_cmds_FC; do + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -21591,6 +22891,12 @@ esac done +# Fix-up fallback echo if it was mangled by the above quoting rules. +case \$lt_ECHO in +*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` + ;; +esac + ac_aux_dir='$ac_aux_dir' xsi_shell='$xsi_shell' lt_shell_append='$lt_shell_append' @@ -21669,7 +22975,9 @@ "include/fastjet/Makefile") CONFIG_FILES="$CONFIG_FILES include/fastjet/Makefile" ;; "include/fastjet/internal/Makefile") CONFIG_FILES="$CONFIG_FILES include/fastjet/internal/Makefile" ;; - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; esac done @@ -21692,24 +23000,26 @@ # after its creation but before its name has been assigned to `$tmp'. $debug || { - tmp= ac_tmp= + tmp= trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 - trap 'as_fn_exit 1' 1 2 13 15 + trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" + test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp +} || +{ + $as_echo "$as_me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. @@ -21717,13 +23027,7 @@ if test -n "$CONFIG_FILES"; then -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi +ac_cr=' ' ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' @@ -21731,7 +23035,7 @@ ac_cs_awk_cr=$ac_cr fi -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +echo 'BEGIN {' >"$tmp/subs1.awk" && _ACEOF @@ -21740,18 +23044,24 @@ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } +ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -21759,7 +23069,7 @@ rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +cat >>"\$tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h @@ -21773,7 +23083,7 @@ t delim :nl h -s/\(.\{148\}\)..*/\1/ +s/\(.\{148\}\).*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p @@ -21787,7 +23097,7 @@ t nl :delim h -s/\(.\{148\}\)..*/\1/ +s/\(.\{148\}\).*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p @@ -21807,7 +23117,7 @@ rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && +cat >>"\$tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" @@ -21839,29 +23149,23 @@ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ + || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 +$as_echo "$as_me: error: could not setup config files machinery" >&2;} + { (exit 1); exit 1; }; } _ACEOF -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// s/^[^=]*=[ ]*$// }' fi @@ -21873,7 +23177,7 @@ # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || +cat >"$tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF @@ -21885,11 +23189,13 @@ # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then + ac_t=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_t"; then break elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} + { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -21974,7 +23280,9 @@ _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 +$as_echo "$as_me: error: could not setup config headers machinery" >&2;} + { (exit 1); exit 1; }; } fi # test -n "$CONFIG_HEADERS" @@ -21987,7 +23295,9 @@ esac case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 +$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} + { (exit 1); exit 1; }; };; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac @@ -22006,7 +23316,7 @@ for ac_f do case $ac_f in - -) ac_f="$ac_tmp/stdin";; + -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. @@ -22015,10 +23325,12 @@ [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" + ac_file_inputs="$ac_file_inputs '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't @@ -22029,7 +23341,7 @@ `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 + { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. @@ -22041,8 +23353,10 @@ esac case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + *:-:* | *:-) cat >"$tmp/stdin" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } ;; esac ;; esac @@ -22070,7 +23384,47 @@ q } s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } ac_builddir=. case "$ac_dir" in @@ -22127,6 +23481,7 @@ # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= + ac_sed_dataroot=' /datarootdir/ { p @@ -22136,11 +23491,12 @@ /@docdir@/p /@infodir@/p /@localedir@/p -/@mandir@/p' +/@mandir@/p +' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 + { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 @@ -22150,7 +23506,7 @@ s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; + s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF @@ -22178,24 +23534,27 @@ s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} +which seems to be undefined. Please make sure it is defined." >&2;} - rm -f "$ac_tmp/stdin" + rm -f "$tmp/stdin" case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + -) cat "$tmp/out" && rm -f "$tmp/out";; + *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } ;; :H) # @@ -22204,21 +23563,27 @@ if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" + } >"$tmp/config.h" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + mv "$tmp/config.h" "$ac_file" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } fi else $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ + || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 +$as_echo "$as_me: error: could not create -" >&2;} + { (exit 1); exit 1; }; } fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" @@ -22256,7 +23621,7 @@ s/.*/./; q'`/stamp-h$_am_stamp_count ;; - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 + :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac @@ -22289,12 +23654,14 @@ esac fi if test -z "$ac_prefix_conf_PKG" ; then - as_fn_error $? "no prefix for _PREFIX_PKG_CONFIG_H" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: no prefix for _PREFIX_PKG_CONFIG_H" >&5 +$as_echo "$as_me: error: no prefix for _PREFIX_PKG_CONFIG_H" >&2;} + { (exit 1); exit 1; }; } else if test ! -f "$ac_prefix_conf_INP" ; then if test -f "$srcdir/$ac_prefix_conf_INP" ; then ac_prefix_conf_INP="$srcdir/$ac_prefix_conf_INP" fi fi - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_prefix_conf_OUT - prefix $ac_prefix_conf_UPP for $ac_prefix_conf_INP defines" >&5 + { $as_echo "$as_me:$LINENO: creating $ac_prefix_conf_OUT - prefix $ac_prefix_conf_UPP for $ac_prefix_conf_INP defines" >&5 $as_echo "$as_me: creating $ac_prefix_conf_OUT - prefix $ac_prefix_conf_UPP for $ac_prefix_conf_INP defines" >&6;} if test -f $ac_prefix_conf_INP ; then echo "s/^#undef *\\([ABCDEFGHIJKLMNOPQRSTUVWXYZ_]\\)/#undef $ac_prefix_conf_UPP""_\\1/" > conftest.prefix @@ -22316,7 +23683,7 @@ echo '/* once:' $ac_prefix_conf_DEF '*/' >>$tmp/pconfig.h echo "#endif" >>$tmp/pconfig.h if cmp -s $ac_prefix_conf_OUT $tmp/pconfig.h 2>/dev/null; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_prefix_conf_OUT is unchanged" >&5 + { $as_echo "$as_me:$LINENO: $ac_prefix_conf_OUT is unchanged" >&5 $as_echo "$as_me: $ac_prefix_conf_OUT is unchanged" >&6;} else ac_dir=`$as_dirname -- "$ac_prefix_conf_OUT" || @@ -22342,13 +23709,55 @@ q } s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } rm -f "$ac_prefix_conf_OUT" mv $tmp/pconfig.h "$ac_prefix_conf_OUT" fi cp conftest.prefix _configs.sed else - as_fn_error $? "input file $ac_prefix_conf_INP does not exist - skip generating $ac_prefix_conf_OUT" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: input file $ac_prefix_conf_INP does not exist - skip generating $ac_prefix_conf_OUT" >&5 +$as_echo "$as_me: error: input file $ac_prefix_conf_INP does not exist - skip generating $ac_prefix_conf_OUT" >&2;} + { (exit 1); exit 1; }; } fi rm -f conftest.* fi @@ -22441,7 +23850,47 @@ q } s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p + { as_dir=$dirpart/$fdir + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done @@ -22469,8 +23918,7 @@ # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. +# 2006, 2007, 2008 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. @@ -22518,12 +23966,6 @@ # Whether or not to optimize for fast installation. fast_install=$enable_fast_install -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that protects backslashes. -ECHO=$lt_ECHO - # The host system. host_alias=$host_alias host=$host @@ -22573,11 +24015,9 @@ # turn newlines into spaces. NL2SP=$lt_lt_NL2SP -# convert \$build file names to \$host format. -to_host_file_cmd=$lt_cv_to_host_file_cmd - -# convert \$build files to toolchain format. -to_tool_file_cmd=$lt_cv_to_tool_file_cmd +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds # An object symbol dumper. OBJDUMP=$lt_OBJDUMP @@ -22585,30 +24025,13 @@ # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method -# Command to use when deplibs_check_method = "file_magic". +# Command to use when deplibs_check_method == "file_magic". file_magic_cmd=$lt_file_magic_cmd -# How to find potential files when deplibs_check_method = "file_magic". -file_magic_glob=$lt_file_magic_glob - -# Find potential files using nocaseglob when deplibs_check_method = "file_magic". -want_nocaseglob=$lt_want_nocaseglob - -# DLL creation program. -DLLTOOL=$lt_DLLTOOL - -# Command to associate shared and link libraries. -sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd - # The archiver. AR=$lt_AR - -# Flags to create an archive. AR_FLAGS=$lt_AR_FLAGS -# How to feed a file listing to the archiver. -archiver_list_spec=$lt_archiver_list_spec - # A symbol stripping program. STRIP=$lt_STRIP @@ -22617,9 +24040,6 @@ old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds -# Whether to use a lock for old archive extraction. -lock_old_archive_extraction=$lock_old_archive_extraction - # A C compiler. LTCC=$lt_CC @@ -22638,24 +24058,21 @@ # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix -# Specify filename containing input files for \$NM. -nm_file_list_spec=$lt_nm_file_list_spec - -# The root where to search for dependent libraries,and in which our libraries should be installed. -lt_sysroot=$lt_sysroot - # The name of the directory that contains temporary libtool files. objdir=$objdir +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that does not interpret backslashes. +ECHO=$lt_ECHO + # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks -# Manifest tool. -MANIFEST_TOOL=$lt_MANIFEST_TOOL - # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL @@ -22712,9 +24129,6 @@ # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec -# Permission mode override for installation of shared libraries. -install_override_mode=$lt_install_override_mode - # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds @@ -22754,10 +24168,6 @@ # The linker used to build libraries. LD=$lt_LD -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds @@ -22770,12 +24180,12 @@ # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static @@ -22862,6 +24272,9 @@ # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path + # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols @@ -22877,9 +24290,6 @@ # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds - # Specify filename containing input files. file_list_spec=$lt_file_list_spec @@ -22926,169 +24336,212 @@ # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) - if test x"$xsi_shell" = xyes; then - sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ -func_dirname ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_basename ()$/,/^} # func_basename /c\ -func_basename ()\ -{\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ -func_dirname_and_basename ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ -func_stripname ()\ -{\ -\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ -\ # positional parameters, so assign one to ordinary parameter first.\ -\ func_stripname_result=${3}\ -\ func_stripname_result=${func_stripname_result#"${1}"}\ -\ func_stripname_result=${func_stripname_result%"${2}"}\ -} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ -func_split_long_opt ()\ -{\ -\ func_split_long_opt_name=${1%%=*}\ -\ func_split_long_opt_arg=${1#*=}\ -} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ -func_split_short_opt ()\ -{\ -\ func_split_short_opt_arg=${1#??}\ -\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ -} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ -func_lo2o ()\ -{\ -\ case ${1} in\ -\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ -\ *) func_lo2o_result=${1} ;;\ -\ esac\ -} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_xform ()$/,/^} # func_xform /c\ -func_xform ()\ -{\ - func_xform_result=${1%.*}.lo\ -} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_arith ()$/,/^} # func_arith /c\ -func_arith ()\ -{\ - func_arith_result=$(( $* ))\ -} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_len ()$/,/^} # func_len /c\ -func_len ()\ -{\ - func_len_result=${#1}\ -} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - -fi - -if test x"$lt_shell_append" = xyes; then - sed -e '/^func_append ()$/,/^} # func_append /c\ -func_append ()\ -{\ - eval "${1}+=\\${2}"\ -} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ -func_append_quoted ()\ -{\ -\ func_quote_for_eval "${2}"\ -\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ -} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 -$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} -fi + case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} + +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} + +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $* )) +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} + +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; + esac +} + +# sed scripts: +my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[^=]*=//' + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` +} + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$@"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF +esac + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1+=\$2" +} +_LT_EOF + ;; + *) + cat << \_LT_EOF >> "$cfgfile" +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1=\$$1\$2" +} + +_LT_EOF + ;; + esac + + + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) - mv -f "$cfgfile" "$ofile" || + mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" @@ -23100,10 +24553,6 @@ # The linker used to build libraries. LD=$lt_LD_CXX -# How to create reloadable object files. -reload_flag=$lt_reload_flag_CXX -reload_cmds=$lt_reload_cmds_CXX - # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds_CXX @@ -23116,12 +24565,12 @@ # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_CXX - # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_CXX +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_CXX + # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_CXX @@ -23208,6 +24657,9 @@ # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_CXX +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path_CXX + # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols_CXX @@ -23223,9 +24675,6 @@ # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds_CXX -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds_CXX - # Specify filename containing input files. file_list_spec=$lt_file_list_spec_CXX @@ -23257,10 +24706,6 @@ # The linker used to build libraries. LD=$lt_LD_FC -# How to create reloadable object files. -reload_flag=$lt_reload_flag_FC -reload_cmds=$lt_reload_cmds_FC - # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds_FC @@ -23273,12 +24718,12 @@ # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_FC -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_FC - # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_FC +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_FC + # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_FC @@ -23365,6 +24810,9 @@ # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_FC +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path_FC + # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols_FC @@ -23380,9 +24828,6 @@ # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds_FC -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds_FC - # Specify filename containing input files. file_list_spec=$lt_file_list_spec_FC @@ -23413,12 +24858,15 @@ done # for ac_tag -as_fn_exit 0 +{ (exit 0); exit 0; } _ACEOF +chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } # configure is writing to config.log, and then calls config.status. @@ -23439,7 +24887,7 @@ exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 + $ac_cs_success || { (exit 1); exit 1; } fi # @@ -23483,7 +24931,7 @@ case $ac_arg in *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac - as_fn_append ac_sub_configure_args " '$ac_arg'" ;; + ac_sub_configure_args="$ac_sub_configure_args '$ac_arg'" ;; esac done @@ -23512,9 +24960,49 @@ test -d "$srcdir/$ac_dir" || continue ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)" - $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5 + $as_echo "$as_me:$LINENO: $ac_msg" >&5 $as_echo "$ac_msg" >&6 - as_dir="$ac_dir"; as_fn_mkdir_p + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } ac_builddir=. case "$ac_dir" in @@ -23561,7 +25049,7 @@ # This should be Cygnus configure. ac_sub_configure=$ac_aux_dir/configure else - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: no configuration information is in $ac_dir" >&5 + { $as_echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5 $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;} ac_sub_configure= fi @@ -23575,19 +25063,21 @@ ac_sub_cache_file=$ac_top_build_prefix$cache_file ;; esac - { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 + { $as_echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 $as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;} # The eval makes quoting arguments work. eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \ --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" || - as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5 +$as_echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;} + { (exit 1); exit 1; }; } fi cd "$ac_popdir" done fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 + { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi diff -Nru fastjet-3.0.3+dfsg/configure.ac fastjet-3.0.6+dfsg/configure.ac --- fastjet-3.0.3+dfsg/configure.ac 2012-06-25 14:15:32.000000000 +0000 +++ fastjet-3.0.6+dfsg/configure.ac 2013-10-28 16:07:59.000000000 +0000 @@ -1,4 +1,4 @@ -AC_INIT([FastJet],[3.0.3]) +AC_INIT([FastJet],[3.0.6]) AC_CONFIG_SRCDIR([src/JetDefinition.cc]) AM_INIT_AUTOMAKE(tar-ustar) @@ -14,7 +14,7 @@ dnl - the first macro needs to place the files in the correct dnl dir in order to have the correct -I options for the remote build dnl - see Makefile.am for distcleaning AX_PREFIX_CONFIG_H leftovers -AM_CONFIG_HEADER(include/fastjet/config_raw.h:config.h.in) +AC_CONFIG_HEADERS(include/fastjet/config_raw.h:config.h.in) AX_PREFIX_CONFIG_H(include/fastjet/config_auto.h,FASTJET,include/fastjet/config_raw.h) dnl check autoconf version @@ -24,7 +24,16 @@ dnl autoconf-2.61 (karnak) dnl autoconf-2.65 (ipht) dnl autoconf-2.68 (virtual&lpthe) -AC_PREREQ(2.59) +dnl +dnl 2013-03-30, updated and tested it works with +dnl autoconf-2.63 + automake 1.11 (tycho SLC6) +dnl autoconf-2.69 + automake 1.13 (gavin's laptop with macports) +dnl +dnl NB: it is broken on lxplus (SLC5, autoconf 2.59 + automake 1.9), +dnl but lxplus will soon migrate to SLC6. For now +dnl autogen can be run on lxplus6, links to automake-1.11 +dnl files replaced with copies and then used on lxplus5 +AC_PREREQ(2.63) dnl load our M4 macro directory dnl - this is recommended by latest versions of libtoolize diff -Nru fastjet-3.0.3+dfsg/debian/changelog fastjet-3.0.6+dfsg/debian/changelog --- fastjet-3.0.3+dfsg/debian/changelog 2013-12-02 12:53:59.000000000 +0000 +++ fastjet-3.0.6+dfsg/debian/changelog 2013-12-15 12:21:03.000000000 +0000 @@ -1,8 +1,12 @@ -fastjet (3.0.3+dfsg-1ubuntu1) trusty; urgency=low +fastjet (3.0.6+dfsg-1) unstable; urgency=medium - * Link fastjetplugins against gfortran, to avoid unresolved symbols. + * New upstream release. + * Bump Standards-Version to 3.9.4. + * Remove obsolte DM-Upload-Allowed field. + * Canonical VCS-* fields. + * libfastjetplugins links against gfortran. (Closes: #728156) - -- Dmitrijs Ledkovs Mon, 02 Dec 2013 12:44:36 +0000 + -- Lifeng Sun Sun, 15 Dec 2013 18:42:11 +0800 fastjet (3.0.3+dfsg-1) unstable; urgency=low diff -Nru fastjet-3.0.3+dfsg/debian/control fastjet-3.0.6+dfsg/debian/control --- fastjet-3.0.3+dfsg/debian/control 2013-12-02 12:53:59.000000000 +0000 +++ fastjet-3.0.6+dfsg/debian/control 2013-12-15 12:21:03.000000000 +0000 @@ -1,16 +1,14 @@ Source: fastjet Section: science Priority: optional -Maintainer: Ubuntu Developers -XSBC-Original-Maintainer: Debian Science Maintainers +Maintainer: Debian Science Maintainers Uploaders: Lifeng Sun -DM-Upload-Allowed: yes Build-Depends: debhelper (>= 7.0.50~), autotools-dev, dh-autoreconf, libsiscone-spherical-dev, gfortran Build-Depends-Indep: doxygen-latex, graphviz -Standards-Version: 3.9.3 +Standards-Version: 3.9.4 Homepage: http://fastjet.fr/ -Vcs-Git: git://git.debian.org/git/debian-science/packages/fastjet.git -Vcs-Browser: http://git.debian.org/?p=debian-science/packages/fastjet.git +Vcs-Git: git://anonscm.debian.org/debian-science/packages/fastjet.git +Vcs-Browser: http://anonscm.debian.org/gitweb/?p=debian-science/packages/fastjet.git Package: libfastjet0 Section: libs diff -Nru fastjet-3.0.3+dfsg/debian/patches/libfastjetplugins-links-gfortran.patch fastjet-3.0.6+dfsg/debian/patches/libfastjetplugins-links-gfortran.patch --- fastjet-3.0.3+dfsg/debian/patches/libfastjetplugins-links-gfortran.patch 1970-01-01 00:00:00.000000000 +0000 +++ fastjet-3.0.6+dfsg/debian/patches/libfastjetplugins-links-gfortran.patch 2013-12-15 12:21:03.000000000 +0000 @@ -0,0 +1,11 @@ +--- a/plugins/Makefile.am ++++ b/plugins/Makefile.am +@@ -38,7 +38,7 @@ + lib_LTLIBRARIES = libfastjetplugins.la + libfastjetplugins_la_SOURCES= + nodist_EXTRA_libfastjetplugins_la_SOURCES = dummy.cc +-libfastjetplugins_la_LIBADD = -lsiscone_spherical -lsiscone ++libfastjetplugins_la_LIBADD = -lsiscone_spherical -lsiscone -lgfortran + if BUILD_PLUGIN_SISCONE + libfastjetplugins_la_LIBADD += SISCone/libSISConePlugin.la + endif diff -Nru fastjet-3.0.3+dfsg/debian/patches/link-gfortran.patch fastjet-3.0.6+dfsg/debian/patches/link-gfortran.patch --- fastjet-3.0.3+dfsg/debian/patches/link-gfortran.patch 2013-12-02 12:53:59.000000000 +0000 +++ fastjet-3.0.6+dfsg/debian/patches/link-gfortran.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,13 +0,0 @@ -Description: link gfortran to avoide unresolved symbols when fastjetplugin is used -Author: Dmitrijs Ledkovs - ---- fastjet-3.0.3+dfsg.orig/plugins/PxCone/Makefile.am -+++ fastjet-3.0.3+dfsg/plugins/PxCone/Makefile.am -@@ -7,6 +7,7 @@ lib_LTLIBRARIES = libPxConePlugin.la - endif - libPxConePlugin_la_CXXFLAGS = $(AM_CXXFLAGS) -I$(srcdir) -I$(srcdir)/../../include - libPxConePlugin_la_SOURCES = pxcone.f PxConePlugin.cc -+libPxConePlugin_la_LIBADD = $(FLIBS) - - EXTRA_DIST = makefile.static pxcone.h - diff -Nru fastjet-3.0.3+dfsg/debian/patches/purge-plugins.patch fastjet-3.0.6+dfsg/debian/patches/purge-plugins.patch --- fastjet-3.0.3+dfsg/debian/patches/purge-plugins.patch 2013-05-06 04:09:21.000000000 +0000 +++ fastjet-3.0.6+dfsg/debian/patches/purge-plugins.patch 2013-12-15 12:21:03.000000000 +0000 @@ -58,7 +58,7 @@ noinst_LTLIBRARIES = libSISConePlugin.la --- a/configure.ac +++ b/configure.ac -@@ -252,9 +252,7 @@ +@@ -261,9 +261,7 @@ fi dnl SISCone @@ -69,7 +69,7 @@ AC_CONFIG_SUBDIRS(plugins/SISCone/siscone) dnl alternatively, to build SISCone directly from the FastJet build dnl system, comment out the previoous lines and uncomment the ones -@@ -263,10 +261,6 @@ +@@ -272,10 +270,6 @@ dnl AM_CONFIG_HEADER(config.siscone.in.h:plugins/SISCone/siscone/siscone/config.h.in) dnl AC_CONFIG_FILES(plugins/SISCone/siscone/Makefile plugins/SISCone/siscone/siscone/Makefile plugins/SISCone/siscone/siscone/spherical/Makefile plugins/SISCone/siscone/examples/Makefile plugins/SISCone/siscone/examples/events/Makefile) @@ -80,7 +80,7 @@ dnl PxCone ACX_CHECK_PLUGIN(PxCone, pxcone, PXCONE, no) -@@ -279,9 +273,6 @@ +@@ -288,9 +282,6 @@ dnl TrackJet ACX_CHECK_PLUGIN(TrackJet, trackjet, TRACKJET, no) diff -Nru fastjet-3.0.3+dfsg/debian/patches/series fastjet-3.0.6+dfsg/debian/patches/series --- fastjet-3.0.3+dfsg/debian/patches/series 2013-12-02 12:53:59.000000000 +0000 +++ fastjet-3.0.6+dfsg/debian/patches/series 2013-12-15 12:21:03.000000000 +0000 @@ -2,4 +2,4 @@ fortran-wrap.patch disable-rpath-by-default.patch libfastjetplugins-links-siscone.patch -link-gfortran.patch +libfastjetplugins-links-gfortran.patch diff -Nru fastjet-3.0.3+dfsg/doc/Makefile.in fastjet-3.0.6+dfsg/doc/Makefile.in --- fastjet-3.0.3+dfsg/doc/Makefile.in 2012-06-25 14:16:24.000000000 +0000 +++ fastjet-3.0.6+dfsg/doc/Makefile.in 2013-10-28 16:10:51.000000000 +0000 @@ -123,7 +123,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -156,7 +155,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -169,7 +167,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -182,7 +179,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -218,6 +214,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/doc/fastjet-doc.tex fastjet-3.0.6+dfsg/doc/fastjet-doc.tex --- fastjet-3.0.3+dfsg/doc/fastjet-doc.tex 2012-06-25 14:15:32.000000000 +0000 +++ fastjet-3.0.6+dfsg/doc/fastjet-doc.tex 2013-10-28 16:07:59.000000000 +0000 @@ -74,7 +74,7 @@ \title{\sf FastJet user manual% \\ \large (for version - 3.0.3% %%%-VERSION-NUMBER (do not remove this comment; used + 3.0.6% %%%-VERSION-NUMBER (do not remove this comment; used % for automatic version-number changes; version number must % stay one a single line) ) @@ -253,7 +253,12 @@ % One repeats this procedure until the smallest $d_{ij}$ or $d_{iB}$ is above some threshold $d_{\text{cut}}$; all particles/pseudojets that -are left are then that event's (non-beam) jets. +are left are then that event's (non-beam) jets.% +% +\footnote{One can also choose to have the exclusive algorithm stop + when it reaches a configuration with a predetermined number of + remaining particles/pseudojets, which then become the event's + (non-beam) jets.} In the ``inclusive'' formulation of the $k_t$ algorithm~\cite{ktincl}, the $d_{ij}$ and $d_{iB}$ distances are the same as above. diff -Nru fastjet-3.0.3+dfsg/doc/figs/Makefile.in fastjet-3.0.6+dfsg/doc/figs/Makefile.in --- fastjet-3.0.3+dfsg/doc/figs/Makefile.in 2012-06-25 14:16:24.000000000 +0000 +++ fastjet-3.0.6+dfsg/doc/figs/Makefile.in 2013-10-28 16:10:51.000000000 +0000 @@ -83,7 +83,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -116,7 +115,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -129,7 +127,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -142,7 +139,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -178,6 +174,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/example/11-filter.cc fastjet-3.0.6+dfsg/example/11-filter.cc --- fastjet-3.0.3+dfsg/example/11-filter.cc 2012-06-13 14:14:58.000000000 +0000 +++ fastjet-3.0.6+dfsg/example/11-filter.cc 2013-10-28 15:10:06.000000000 +0000 @@ -20,7 +20,7 @@ //---------------------------------------------------------------------- //STARTHEADER -// $Id: 11-filter.cc 2684 2011-11-14 07:41:44Z soyez $ +// $Id: 11-filter.cc 3249 2013-10-28 15:06:25Z salam $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -76,7 +76,7 @@ if (! j.has_pieces()) return _Rmax; vector pieces = j.pieces(); - if (! pieces.size()==2) return _Rmax; + if (pieces.size() != 2) return _Rmax; double deltaR = pieces[0].delta_R(pieces[1]); return min(_Rmax, _deltaR_factor * deltaR); diff -Nru fastjet-3.0.3+dfsg/example/Makefile.in fastjet-3.0.6+dfsg/example/Makefile.in --- fastjet-3.0.3+dfsg/example/Makefile.in 2012-06-25 14:16:24.000000000 +0000 +++ fastjet-3.0.6+dfsg/example/Makefile.in 2013-10-28 16:10:51.000000000 +0000 @@ -334,7 +334,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -367,7 +366,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -380,7 +378,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -393,7 +390,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -429,6 +425,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/example/data/Makefile.am fastjet-3.0.6+dfsg/example/data/Makefile.am --- fastjet-3.0.3+dfsg/example/data/Makefile.am 2012-06-13 14:14:57.000000000 +0000 +++ fastjet-3.0.6+dfsg/example/data/Makefile.am 2013-09-15 08:08:22.000000000 +0000 @@ -2,6 +2,7 @@ Pythia-Z2jets-lhc-pileup-1ev.dat \ Pythia-Zp2jets-lhc-pileup-1ev.dat \ Pythia-dijet-ptmin100-lhc-pileup-1ev.dat \ + boosted_top_event.dat \ cone-darktower.dat \ cone-midpoint-problem-ev1.dat \ cone-midpoint-problem-ev2.dat \ diff -Nru fastjet-3.0.3+dfsg/example/data/Makefile.in fastjet-3.0.6+dfsg/example/data/Makefile.in --- fastjet-3.0.3+dfsg/example/data/Makefile.in 2012-06-25 14:16:24.000000000 +0000 +++ fastjet-3.0.6+dfsg/example/data/Makefile.in 2013-10-28 16:10:51.000000000 +0000 @@ -83,7 +83,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -116,7 +115,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -129,7 +127,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -142,7 +139,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -178,6 +174,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ @@ -198,6 +195,7 @@ Pythia-Z2jets-lhc-pileup-1ev.dat \ Pythia-Zp2jets-lhc-pileup-1ev.dat \ Pythia-dijet-ptmin100-lhc-pileup-1ev.dat \ + boosted_top_event.dat \ cone-darktower.dat \ cone-midpoint-problem-ev1.dat \ cone-midpoint-problem-ev2.dat \ diff -Nru fastjet-3.0.3+dfsg/example/data/boosted_top_event.dat fastjet-3.0.6+dfsg/example/data/boosted_top_event.dat --- fastjet-3.0.3+dfsg/example/data/boosted_top_event.dat 1970-01-01 00:00:00.000000000 +0000 +++ fastjet-3.0.6+dfsg/example/data/boosted_top_event.dat 2012-06-13 14:14:57.000000000 +0000 @@ -0,0 +1,184 @@ +4.443040200515011 -1.981973158430801 2.158753358084194 5.32433279107086 +2.31363281944535 -2.854856843017854 1.791110323651392 4.090312994592358 +0.01301267338209194 -0.133370233930565 -0.03291498504702459 0.196265458264791 +41.87967864418528 -64.7568975159685 34.13107880903351 84.49948965847268 +1.462035851087643 -0.5543754046618723 15.66736994537819 15.74577980047033 +3.81328474115956 -1.764014878542591 41.95115869166183 42.16392113575152 +1.80264576954806 0.139407492062761 21.08149518058314 21.15934509981731 +-0.8104379501482175 -1.090410758265888 9.695906882584046 9.791623734265073 +0.5296238316503354 0.1242709116626073 2.676453477470296 2.734744533681396 +1.554676972131756 0.1336479642303049 13.85425971149097 13.94251103710739 +2.944543804549147 0.6146888409898388 16.3192867453129 16.59478171741923 +4.96704473466367 1.445805322364639 24.96693066144924 25.49762720067971 +3.311892749039903 1.132378386689272 25.6273081995232 25.86993391768005 +0.2341900487109569 -0.413694717646954 6.955913837221454 6.973536075340338 +1.012291542878725 0.3816698883009438 15.71021680072383 15.74804107760914 +-0.5625408042048496 0.5071548383753761 1.401982893381522 1.849866482943407 +-0.2125364625857298 -0.316844667162492 0.474515824466794 0.6246657855262792 +-0.3638152695953571 0.01414233480605764 0.3435152688701566 0.5196576573778598 +-4.616518220865635 2.80706334136682 3.118415962383696 6.239859211983818 +-0.4969691869516424 0.2735791036724811 0.2070311307625969 0.6187934940272515 +-46.93732138301196 28.56231215370209 30.20254678460782 62.6987330513065 +-14.22905975482471 8.471172375795181 8.60419266090682 18.66222157348129 +-265.3651936143328 157.9538734807837 153.5550398829999 344.9277158887576 +-0.3516091803351744 0.9765400194263832 255.7848209160422 255.786962314496 +0.8530140073585586 -0.9388928511227101 91.38261281478435 91.39152344350285 +0.5298148200515205 -0.1248896568179652 5.909706359396239 5.936363382502345 +-10.22607855096412 3.027932397376096 2.615821986160649 10.9818851476989 +-34.80987587865758 10.66962713224548 8.546491998186664 37.39826743431659 +-3.852828633481655 1.334537683485353 1.326545631234082 4.290044569030117 +-0.1160739520875922 0.2363036743615682 0.0395523368951245 0.2984904967061359 +-19.81782558547225 3.115999101659598 12.21941090308011 23.49019250540436 +-58.15941048081305 11.74060720434017 37.35772839460079 70.11403736479575 +7.329351331805678 -3.260261372929162 3.633583237668554 8.807374291485603 +5.594954869559254 -2.17048095602218 3.287905892790758 6.844290505056604 +1.92717525813373 -0.5071098420347419 0.5150985884649836 2.063000535188959 +3.257291213145361 -1.051022581674973 1.237060042095555 3.642031280353611 +0.7997813562337632 -0.6961647284216191 -3557.327295170386 3557.327576933335 +0.5072668497037492 0.06147117881228559 -847.2119534791813 847.2121190682756 +0.2875785566625523 -0.3114602363668867 -45.38089456470501 45.38307525937793 +0.4150136356080792 -0.09839262829566853 -28.1207461345506 28.12432684306926 +-0.04836126267013567 -0.1364481495178481 0.1067121683727987 0.2276492499717883 +-0.05748867649400144 -0.4333985307956431 -1.13460994234412 1.312295666260839 +0.5105463327613835 -0.04699005707825835 -1.23912200532808 1.428961135737637 +-0.00522471913641278 -0.957488764243671 -0.1630984221652092 0.9806287406841162 +0.04933786403272375 -0.08309246908103761 -0.1338773258754884 0.216197841175314 +0.4677401818349315 0.7004516034095006 -0.7232807114838797 1.454420880944213 +1.18320097729094 0.02474183359869694 -0.7391083233857811 1.402261605261369 +0.6396476046683334 -0.1339751544755916 0.05545119937632803 0.6705617201920808 +0.1260900656857863 0.1998505861256777 -0.3427659593259053 0.4390982227384174 +1.898757748042543 -0.2155219598180566 1.641162818184181 2.522821016561784 +-0.2042646882161427 -0.6399859361117544 -0.09957743048363632 0.6933264100224332 +2.096009636284185 -0.07917436013352976 0.7314895957699736 2.225776670809148 +1.477868229793751 -0.5065994735342938 0.1045632761783022 1.571588562679198 +0.3725900668961165 -0.1454001566899054 -0.044835418425202 0.4259748386471519 +4.64757514076924 -1.026307704665311 0.5925758002304669 4.821623091114677 +1.068641761038985 0.1311111465189505 -0.2049907002205174 1.104846739713213 +0.5757911735336797 -0.09939037137297581 0.1497717959484542 0.6191326975718341 +0.4431332941886462 0.2321257360103889 -0.08673302758098067 0.5253491145992439 +0.8473435256071397 -0.035341970600766 0.1941238586305205 0.881137879485319 +0.1875466667032828 0.1205562296197241 0.01585645786470233 0.2635123694395595 +0.3306117243255981 -0.2883617970344716 0.03311959640885747 0.4601881640337792 +1.66387323301705 -1.067866542894716 0.615886799928167 2.070779959172456 +4.809788246927025 -3.054258642818172 3.183425262781236 6.528014617142079 +1.073912064692242 -0.680158717253658 1.096879071186406 1.6847927127853 +1.807551638427001 -1.625625262691369 1.182048412593988 2.706539944356352 +2.261190711264925 -3.670802343013493 2.3018479606382 4.88935139798505 +1.461097789157922 -2.65316178521952 0.8676290230193422 3.153780923671918 +0.1344944914313315 -0.4399409087485336 8.361804289220341 8.375612665801802 +-0.1749831954154424 -0.5512534502494114 4.224913486268639 4.266599727704052 +-0.7685937918560832 -1.563990497049998 19.44375720648364 19.54429043944361 +0.06612515801528455 -0.09911203805847341 3.667329868406352 3.671918283570049 +-2.228412751906444 -5.455348855502769 77.48112581830409 77.71058038893329 +-0.169941740242372 -0.3587791949837179 5.437681514214051 5.453824580627341 +0.454374373509574 0.05554972600569225 1.798490167902031 1.920351448928503 +0.3094197332326363 -0.06075075113444701 2.906085777115471 2.926257912322491 +0.4730380307691027 0.01824450174413716 2.008388892562961 2.067835434595336 +2.24698590890178 0.8118129882793939 13.2179571581941 13.43286481817996 +9.156063457945823 2.493534515039197 45.85965205877013 46.83136896328659 +2.509473483971689 0.3112763884825697 22.70484422886101 22.84565125792055 +-2.249824958718415 0.2166789144003452 1.298315195724745 2.77075372943317 +-0.09644982615867842 0.1233671646256993 0.1839484957607515 0.276728523586686 +-0.1769747163690117 0.4550962613543642 0.1737227945158016 0.536742071731843 +-0.3676103717008425 -0.3273314841297764 0.611720533369146 0.7974741887547617 +-2.547191986153097 0.9134137025220355 1.565088203893118 3.129136059225127 +-0.5577929359108532 -0.1089676249770207 0.4571105006796545 0.7417388441202108 +-4.729238565467801 3.106960587234218 3.024973703021462 6.41785378367302 +-0.3151769296318855 0.3550587048778668 0.2998270671329233 0.5775110834150815 +-20.12600819094291 12.2570953839401 13.05145671091216 26.93791630453478 +-9.985150799240124 6.183063676643735 6.455084794698944 13.40223310572348 +-4.228090038933392 2.594955825488845 2.660229561480977 5.630770998162109 +0.5344124160429216 -0.3299365132378 2300.406411254331 2300.406501224197 +-0.2318035074141059 -0.4298413758365847 1119.639499082007 1119.639613724292 +-0.06574399467919553 0.02554751266698382 1196.24855726432 1196.248927306733 +-0.1305007537883574 -0.1744488020744108 141.4364290148715 141.4366612123974 +-0.1804198586505279 -0.3510464797405781 12.34902603573393 12.35612029613132 +-0.2560702651674466 0.1945327978526261 38.54484503842165 38.54642283826712 +0.02602943795653545 -0.2528868596146006 5.551076565307591 5.558647327741991 +0.11691835956163 0.02219327430608829 1.769354597499895 1.778836114098493 +0.3401359794291998 0.04906006809307201 12.16391626307594 12.16951838941488 +-5.811720317923788 1.929615336401205 1.450317897294059 6.293085920552362 +-42.03346288550063 13.41095691857489 10.74861478487461 45.41165012634043 +-16.46322320884539 5.067820391730215 4.12066416600568 17.71213919607131 +-39.61758005601186 11.82649722449571 10.17063876820883 42.57792924548828 +-50.88007111452495 15.78615454635955 13.50310194849381 54.95758631719995 +-7.268166229972278 2.352919016186602 1.562636726003156 7.798960287473954 +-13.62167657735284 4.471885401187711 3.977505224762266 14.8790658051092 +-0.6773639660763457 0.1981373064342463 0.3472899101597895 0.7988556824223582 +-15.75319814041399 5.468839898475453 9.493201008629027 19.18881305544809 +-16.84092795767703 5.661638803910262 9.704348315996091 20.24511952162018 +-7.036732766238922 2.371533071589002 4.703890324773707 8.791164935376912 +-2.995640589978655 0.4652182583940593 1.819740912879062 3.538534632750796 +-83.48526724301048 12.90343529745575 51.79036133138193 99.08858781690253 +65.10099234434752 -25.01320295433359 43.07073391670071 81.97030735172774 +55.36806830695215 -21.67267525229517 37.53762733112413 70.31657547171952 +13.44077391216175 -4.92299943658803 9.381538754666067 17.11499564711295 +15.49064359750093 -5.473866003760814 10.28686475668742 19.38408714936823 +11.26498535154006 -4.856400602183309 7.734695796768756 14.50207022627635 +2.43563147828344 -0.8074238435358505 1.986434082685191 3.248020029320748 +3.566298952230901 -1.901160269798776 2.567582040984415 4.789947361478026 +10.01552610111836 -4.930215174982475 4.512695205832837 12.04166444306837 +1.567020454381502 -0.5707829437517079 0.9156264968679643 1.90733787135226 +3.799111568819297 -1.330248269757968 1.242435905471528 4.214965709900323 +2.074557448108446 -0.7591248261850578 0.8727930466502813 2.379350036126211 +1.916208573722644 -0.9302085818760092 0.4628606512500023 2.18394205204248 +10.85919648484296 -4.273478839292884 3.854469259661105 12.29069496590336 +6.09400152621323 -2.139674625766228 2.649869194437251 6.982574642505767 +3.444390231489232 -1.338518243144055 1.383217830426753 3.948033221848366 +4.946313661553101 -1.871350816964277 1.950414765703251 5.638289641131697 +17.45172086081805 -6.559706274268344 6.652830135530008 19.7957236751073 +17.56804035824135 -6.264047152195905 6.283446007050177 19.7037766497224 +3.709830520356589 -1.524208095837985 1.184291592808911 4.184265666862605 +31.60010995467371 -11.6068347751881 11.80791229509892 35.68746484691274 +21.69762679792003 -8.135317440094839 8.184931864899461 24.57603970834958 +6.288598237742758 -2.285070327038908 2.284149886143755 7.071409667281733 +11.06420557462027 -3.68569899446528 4.556998725326356 12.52145116361465 +3.796273258852176 -1.131415715267631 1.451850390085518 4.221123231110666 +30.29521977803535 -10.03680298331034 12.03284716489185 34.10786780500648 +14.77184800174475 -5.135187529381257 5.531059804951163 16.5888440434953 +56.07476970904315 -18.82852402014037 21.27638516975571 62.86173049142004 +126.6826253728478 -42.63416550673878 46.94664994034838 141.6692126046987 +66.22658761205626 -21.88926079753906 24.83311289093274 74.03920326853034 +-0.08679377727366494 -0.1500488387729327 -148.6880422431407 148.6882087917421 +0.2140869302171618 -0.08853145553194997 -354.734226771748 354.7343298782444 +-0.07045196921125639 0.1909519550113888 -138.4076986444098 138.4079141153831 +-0.1709865071877684 -0.03980881571202469 -782.4918006285326 782.4918327700268 +0.007824973701787155 0.08049113253454615 -210.5599097558931 210.5599715431387 +-0.04196907760921853 -0.03001217700113126 -224.8684637552206 224.8685101862144 +-0.5134261045898311 -0.3489723039813059 -13.8290693732199 13.84369992263806 +0.03390833595264833 0.2909073132513144 -12.19695950366782 12.2012736121752 +0.003830532052432972 -0.3602721315008213 -6.203527125002652 6.215548186383533 +0.7435355983898936 0.02776871331515796 -13.00188949772757 13.02390980403084 +-0.1076183994760566 -0.3997131387439381 -2.864598492009522 2.897715758750942 +0.9330251448568652 -0.7332923016906336 -10.37674831899099 10.44531660512195 +0.1065109825890025 0.1237505985228431 -1.065326444286243 1.086765392273054 +0.1403039498841059 -0.07921516095894976 -0.8999706505169658 0.9248714487812696 +0.1205561640486976 -0.0364860555094228 -1.957276505040756 1.965964378751896 +0.3791749811523273 -1.176536291122374 -7.247983026795441 7.353961453004406 +0.2189345710770156 -0.04352185675946721 -1.647902216851593 1.668420754825612 +-0.3101263230654154 0.1078831784976782 -0.9719551025521203 1.035371248749906 +0.08439513247449035 -0.1515144475969636 -0.6950379861582834 0.7298196717812983 +0.1433301498366729 -0.01421458313049041 -0.3896698083761474 0.4368154601037836 +0.4346496564188642 -0.07926466473489044 -2.258084881454953 2.305131303777726 +-0.009287905088473256 -0.004226728696126833 -0.7439756130916003 0.7570228716435361 +0.5456053082650094 0.02614717368802677 -5.830291821653194 5.857379205168037 +-0.4538043647441131 -0.3349582054855738 -0.8840485298715818 1.057902164167854 +0.305913145412355 -0.3327090517957014 -1.266181141556176 1.351655515956405 +0.288655980658574 -1.222195367596255 0.06757256752114428 1.569854015036146 +-0.02745504257436318 -0.1608962840411786 0.09941146937768755 0.2339735759115773 +0.9140290244902491 0.1118862412996146 0.03181237678237547 1.047212989233468 +0.02892165894587684 -0.08598885633896038 -0.135257449912437 0.2144875484206004 +0.4739656846053932 0.3897150996736191 0.701807011961687 0.9419522342113051 +0.554323348334124 -0.2746821701584092 -0.04683236545916414 0.6359227346665541 +0.4258307831353415 -0.001066542204400223 0.5490320417474029 0.707805606535618 +0.5639947237539658 -0.1302300205144759 0.1815688852604248 0.6224925314091939 +1.556779588574816 0.07352542652733929 0.2121294886673563 1.579065350329579 +2.551665264209611 -0.3635240454871023 0.1497480257352126 2.585302578777349 +0.7937850713681196 0.6148810934035505 -0.4759501055854813 1.119902579003579 +0.2874446572470952 0.3533138965653799 0.0317182695472677 0.4774316432843398 +0.2671431840352267 0.008482282703567781 2.181812476498616 2.202263088938596 +2.236209987260169 -0.2860498550576693 21.54452557665043 21.66257744475586 +6.778143877219338 1.769154605722416 32.92085608448765 33.66160399035795 +2.312238582840707 0.4199937963612218 17.25467870431632 17.42109223530621 +6.988322668627594 -2.472619489299767 2.689565034079615 7.886934811266226 +26.90799549735106 -8.807748783031538 10.05361875946303 30.04515585341479 diff -Nru fastjet-3.0.3+dfsg/example/fastjet_timing_plugins.cc fastjet-3.0.6+dfsg/example/fastjet_timing_plugins.cc --- fastjet-3.0.3+dfsg/example/fastjet_timing_plugins.cc 2012-06-13 14:14:58.000000000 +0000 +++ fastjet-3.0.6+dfsg/example/fastjet_timing_plugins.cc 2013-09-15 20:14:26.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: fastjet_timing_plugins.cc 2806 2011-12-01 17:21:00Z salam $ +// $Id: fastjet_timing_plugins.cc 3209 2013-09-15 20:03:30Z salam $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -303,7 +303,11 @@ bool get_all_dij = cmdline.present("-get-all-dij"); bool get_all_yij = cmdline.present("-get-all-yij"); double subdcut = cmdline.double_val("-subdcut",-1.0); - double etamax = cmdline.double_val("-etamax",1.0e305); + double rapmax = cmdline.double_val("-rapmax",1.0e305); + if (cmdline.present("-etamax")) { + cerr << "WARNING: -etamax options actually sets maximum rapidity (and overrides -rapmax)\n"; + rapmax = cmdline.double_val("-etamax"); + } bool show_constituents = cmdline.present("-const"); bool massless = cmdline.present("-massless"); int nev = cmdline.int_val("-nev",1); @@ -413,7 +417,7 @@ max_iterations, overlap_threshold, sm_scale))); #else // FASTJET_ENABLE_PLUGIN_CDFCONES - is_unavailable("midpoint"); + is_unavailable("MidPoint"); #endif // FASTJET_ENABLE_PLUGIN_CDFCONES } if (all_algs || cmdline.present("-pxcone")) { @@ -423,7 +427,7 @@ ktR, min_jet_energy, overlap_threshold))); #else // FASTJET_ENABLE_PLUGIN_PXCONE - is_unavailable("pxcone"); + is_unavailable("PxCone"); #endif // FASTJET_ENABLE_PLUGIN_PXCONE } if (all_algs || cmdline.present("-jetclu")) { @@ -431,7 +435,7 @@ jet_defs.push_back( fj::JetDefinition( new fj::CDFJetCluPlugin ( ktR, overlap_threshold, seed_threshold))); #else // FASTJET_ENABLE_PLUGIN_CDFCONES - is_unavailable("pxcone"); + is_unavailable("JetClu"); #endif // FASTJET_ENABLE_PLUGIN_CDFCONES } if (all_algs || cmdline.present("-siscone") || cmdline.present("-sisconespheri")) { @@ -459,7 +463,7 @@ jet_defs.push_back( fj::JetDefinition(plugin)); } #else // FASTJET_ENABLE_PLUGIN_SISCONE - is_unavailable("siscone"); + is_unavailable("SISCone"); #endif // FASTJET_ENABLE_PLUGIN_SISCONE } if (all_algs || cmdline.present("-d0runiicone")) { @@ -509,7 +513,7 @@ #ifdef FASTJET_ENABLE_PLUGIN_D0RUNICONE jet_defs.push_back( fj::JetDefinition(new fj::D0RunIpre96ConePlugin(ktR, seed_threshold, overlap_threshold))); #else // FASTJET_ENABLE_PLUGIN_D0RUNICONE - is_unavailable("D0RunICone"); + is_unavailable("D0RunIpre96Cone"); #endif // FASTJET_ENABLE_PLUGIN_D0RUNICONE } if (all_algs || cmdline.present("-d0runicone")) { @@ -590,7 +594,7 @@ } } fj::PseudoJet psjet(fourvec); - if (abs(psjet.rap() < etamax)) {particles.push_back(psjet);} + if (abs(psjet.rap()) < rapmax) {particles.push_back(psjet);} } // add a fake underlying event which is very soft, uniformly distributed @@ -710,6 +714,8 @@ if (show_cones) { const fj::SISConeExtras * extras = dynamic_cast(clust_seq->extras()); + if (extras == 0) + throw fastjet::Error("extras object for SISCone was null (this can happen with certain area types)"); cout << "most ambiguous split (difference in squared dist) = " << extras->most_ambiguous_split() << endl; vector stable_cones(extras->stable_cones()); diff -Nru fastjet-3.0.3+dfsg/example/root/Makefile.in fastjet-3.0.6+dfsg/example/root/Makefile.in --- fastjet-3.0.3+dfsg/example/root/Makefile.in 2012-06-25 14:16:24.000000000 +0000 +++ fastjet-3.0.6+dfsg/example/root/Makefile.in 2013-10-28 16:10:51.000000000 +0000 @@ -83,7 +83,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -116,7 +115,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -129,7 +127,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -142,7 +139,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -178,6 +174,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/fortran_wrapper/Makefile.in fastjet-3.0.6+dfsg/fortran_wrapper/Makefile.in --- fastjet-3.0.3+dfsg/fortran_wrapper/Makefile.in 2012-06-25 14:16:24.000000000 +0000 +++ fastjet-3.0.6+dfsg/fortran_wrapper/Makefile.in 2013-10-28 16:10:51.000000000 +0000 @@ -83,7 +83,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -116,7 +115,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -129,7 +127,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -142,7 +139,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -178,6 +174,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/include/Makefile.in fastjet-3.0.6+dfsg/include/Makefile.in --- fastjet-3.0.3+dfsg/include/Makefile.in 2012-06-25 14:16:24.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/Makefile.in 2013-10-28 16:10:51.000000000 +0000 @@ -123,7 +123,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -156,7 +155,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -169,7 +167,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -182,7 +179,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -218,6 +214,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/include/fastjet/ClusterSequence.hh fastjet-3.0.6+dfsg/include/fastjet/ClusterSequence.hh --- fastjet-3.0.3+dfsg/include/fastjet/ClusterSequence.hh 2012-06-13 14:14:54.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/ClusterSequence.hh 2013-06-05 08:13:48.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: ClusterSequence.hh 2806 2011-12-01 17:21:00Z salam $ +// $Id: ClusterSequence.hh 3114 2013-05-04 08:46:00Z salam $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -32,7 +32,6 @@ #include #include -#include "fastjet/internal/DynamicNearestNeighbours.hh" #include "fastjet/PseudoJet.hh" #include #include @@ -50,8 +49,9 @@ FASTJET_BEGIN_NAMESPACE // defined in fastjet/internal/base.hh -// forward declaration +// forward declarations class ClusterSequenceStructure; +class DynamicNearestNeighbours; /// @ingroup basic_classes /// \class ClusterSequence diff -Nru fastjet-3.0.3+dfsg/include/fastjet/ClusterSequenceStructure.hh fastjet-3.0.6+dfsg/include/fastjet/ClusterSequenceStructure.hh --- fastjet-3.0.3+dfsg/include/fastjet/ClusterSequenceStructure.hh 2012-06-13 14:14:53.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/ClusterSequenceStructure.hh 2013-04-06 07:19:35.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: ClusterSequenceStructure.hh 2577 2011-09-13 15:11:38Z salam $ +// $Id: ClusterSequenceStructure.hh 3071 2013-04-01 12:52:46Z cacciari $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -95,9 +95,11 @@ /// pointer to it; otherwise throw an error virtual const ClusterSequence * validated_cs() const; +#ifndef __FJCORE__ /// if the jet has valid area information then return a pointer to /// the associated ClusterSequenceAreaBase object; otherwise throw an error virtual const ClusterSequenceAreaBase * validated_csab() const; +#endif // __FJCORE__ /// set the associated csw virtual void set_associated_cs(const ClusterSequence * new_cs){ @@ -236,6 +238,7 @@ // the following ones require a computation of the area in the // parent ClusterSequence (See ClusterSequenceAreaBase for details) //------------------------------------------------------------------ +#ifndef __FJCORE__ /// check if it has a defined area virtual bool has_area() const; @@ -257,6 +260,7 @@ /// throws an Error if there is no support for area in the parent CS virtual bool is_pure_ghost(const PseudoJet &reference) const; +#endif // __FJCORE__ //\} --- end of jet structure ------------------------------------- protected: diff -Nru fastjet-3.0.3+dfsg/include/fastjet/CompositeJetStructure.hh fastjet-3.0.6+dfsg/include/fastjet/CompositeJetStructure.hh --- fastjet-3.0.3+dfsg/include/fastjet/CompositeJetStructure.hh 2012-06-13 14:14:53.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/CompositeJetStructure.hh 2013-04-06 07:19:35.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: CompositeJetStructure.hh 2684 2011-11-14 07:41:44Z soyez $ +// $Id: CompositeJetStructure.hh 3071 2013-04-01 12:52:46Z cacciari $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -87,6 +87,7 @@ virtual std::vector pieces(const PseudoJet &jet) const; // area-related material +#ifndef __FJCORE__ /// check if it has a well-defined area virtual bool has_area() const; @@ -115,6 +116,7 @@ _area_4vector_ptr = area_4vector_ptr; } +#endif // __FJCORE__ protected: std::vector _pieces; ///< the pieces building the jet diff -Nru fastjet-3.0.3+dfsg/include/fastjet/Makefile.in fastjet-3.0.6+dfsg/include/fastjet/Makefile.in --- fastjet-3.0.3+dfsg/include/fastjet/Makefile.in 2012-06-25 14:16:24.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/Makefile.in 2013-10-28 16:10:51.000000000 +0000 @@ -149,7 +149,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -182,7 +181,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -195,7 +193,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -208,7 +205,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -244,6 +240,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/include/fastjet/NNH.hh fastjet-3.0.6+dfsg/include/fastjet/NNH.hh --- fastjet-3.0.3+dfsg/include/fastjet/NNH.hh 2012-06-25 13:41:23.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/NNH.hh 2013-09-15 08:08:22.000000000 +0000 @@ -1,8 +1,8 @@ -#ifndef __NNH_HH__ -#define __NNH_HH__ +#ifndef __FASTJET_NNH_HH__ +#define __FASTJET_NNH_HH__ //STARTHEADER -// $Id: NNH.hh 2891 2012-06-15 12:47:59Z soyez $ +// $Id: NNH.hh 3203 2013-09-15 07:49:50Z salam $ // // Copyright (c) 2009, Matteo Cacciari, Gavin Salam and Gregory Soyez // @@ -378,4 +378,4 @@ FASTJET_END_NAMESPACE // defined in fastjet/internal/base.hh -#endif // __NNH_HH__ +#endif // __FASTJET_NNH_HH__ diff -Nru fastjet-3.0.3+dfsg/include/fastjet/PseudoJet.hh fastjet-3.0.6+dfsg/include/fastjet/PseudoJet.hh --- fastjet-3.0.3+dfsg/include/fastjet/PseudoJet.hh 2012-06-13 14:14:54.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/PseudoJet.hh 2013-06-05 08:13:48.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: PseudoJet.hh 2728 2011-11-20 14:18:59Z salam $ +// $Id: PseudoJet.hh 3111 2013-05-04 08:17:27Z salam $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -51,9 +51,12 @@ /// default value for phi, meaning it (and rapidity) have yet to be calculated) const double pseudojet_invalid_phi = -100.0; +const double pseudojet_invalid_rap = -1e200; +#ifndef __FJCORE__ // forward definition class ClusterSequenceAreaBase; +#endif // __FJCORE__ /// @ingroup basic_classes /// \class PseudoJet @@ -72,6 +75,7 @@ // cases better than just having the default constructor for the // internal shared pointer: see PJtiming.cc and the notes therein) PseudoJet() : _px(0), _py(0), _pz(0), _E(0) {_finish_init(); _reset_indices();} + //PseudoJet() : _px(0), _py(0), _pz(0), _E(0), _phi(pseudojet_invalid_phi), _rap(pseudojet_invalid_rap), _kt2(0) {_reset_indices();} /// construct a pseudojet from explicit components PseudoJet(const double px, const double py, const double pz, const double E); @@ -250,7 +254,11 @@ // complex construct here that works also in such a case. As for // dynamic_cast, NULL is returned if L is not derived from // PseudoJet - const PseudoJet * pj = cast_if_derived(&some_four_vector); + // + // Note the explicit request for fastjet::cast_if_derived; when + // combining fastjet and fjcore, this avoids ambiguity in which of + // the two cast_if_derived calls to use. + const PseudoJet * pj = fastjet::cast_if_derived(&some_four_vector); if (pj){ (*this) = *pj; @@ -503,6 +511,7 @@ /// shorthand for validated_cluster_sequence() const ClusterSequence * validated_cs() const; +#ifndef __FJCORE__ /// if the jet has valid area information then return a pointer to /// the associated ClusterSequenceAreaBase object; otherwise throw an error inline const ClusterSequenceAreaBase * validated_cluster_sequence_area_base() const { @@ -511,6 +520,8 @@ /// shorthand for validated_cluster_sequence_area_base() const ClusterSequenceAreaBase * validated_csab() const; +#endif // __FJCORE__ + //\} //------------------------------------------------------------- @@ -717,6 +728,7 @@ // the following ones require a computation of the area in the // parent ClusterSequence (See ClusterSequenceAreaBase for details) //------------------------------------------------------------------ +#ifndef __FJCORE__ /// check if it has a defined area virtual bool has_area() const; @@ -738,6 +750,7 @@ /// throws an Error if there is no support for area in the parent CS virtual bool is_pure_ghost() const; +#endif // __FJCORE__ //\} --- end of jet structure ------------------------------------- diff -Nru fastjet-3.0.3+dfsg/include/fastjet/PseudoJetStructureBase.hh fastjet-3.0.6+dfsg/include/fastjet/PseudoJetStructureBase.hh --- fastjet-3.0.3+dfsg/include/fastjet/PseudoJetStructureBase.hh 2012-06-13 14:14:54.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/PseudoJetStructureBase.hh 2013-04-06 07:19:35.000000000 +0000 @@ -1,5 +1,8 @@ +#ifndef __FASTJET_PSEUDOJET_STRUCTURE_BASE_HH__ +#define __FASTJET_PSEUDOJET_STRUCTURE_BASE_HH__ + //STARTHEADER -// $Id: PseudoJetStructureBase.hh 2670 2011-11-11 17:01:06Z salam $ +// $Id: PseudoJetStructureBase.hh 3071 2013-04-01 12:52:46Z cacciari $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -27,9 +30,6 @@ //ENDHEADER -#ifndef __FASTJET_PSEUDOJET_STRUCTURE_BASE_HH__ -#define __FASTJET_PSEUDOJET_STRUCTURE_BASE_HH__ - #include "fastjet/internal/base.hh" #include @@ -39,7 +39,9 @@ class PseudoJet; class ClusterSequence; +#ifndef __FJCORE__ class ClusterSequenceAreaBase; +#endif // __FJCORE__ /// @ingroup extra_info /// \class PseudoJetStructureBase @@ -84,9 +86,11 @@ /// pointer to it; otherwise throw an error virtual const ClusterSequence * validated_cs() const; +#ifndef __FJCORE__ /// if the jet has valid area information then return a pointer to /// the associated ClusterSequenceAreaBase object; otherwise throw an error virtual const ClusterSequenceAreaBase * validated_csab() const; +#endif //\} @@ -202,6 +206,7 @@ // the following ones require a computation of the area in the // parent ClusterSequence (See ClusterSequenceAreaBase for details) //------------------------------------------------------------------ +#ifndef __FJCORE__ /// check if it has a defined area /// @@ -229,6 +234,7 @@ /// By default, throws an Error virtual bool is_pure_ghost(const PseudoJet &reference) const; +#endif // __FJCORE__ //\} --- end of jet structure ------------------------------------- }; diff -Nru fastjet-3.0.3+dfsg/include/fastjet/Selector.hh fastjet-3.0.6+dfsg/include/fastjet/Selector.hh --- fastjet-3.0.3+dfsg/include/fastjet/Selector.hh 2012-06-13 14:14:54.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/Selector.hh 2013-09-15 08:08:22.000000000 +0000 @@ -1,8 +1,8 @@ -#ifndef __SELECTOR_HH__ -#define __SELECTOR_HH__ +#ifndef __FASTJET_SELECTOR_HH__ +#define __FASTJET_SELECTOR_HH__ //STARTHEADER -// $Id: Selector.hh 2687 2011-11-14 11:17:51Z soyez $ +// $Id: Selector.hh 3203 2013-09-15 07:49:50Z salam $ // // Copyright (c) 2009-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -30,7 +30,9 @@ //ENDHEADER #include "fastjet/PseudoJet.hh" +#ifndef __FJCORE__ #include "fastjet/RangeDefinition.hh" // for initialisation from a RangeDefinition +#endif // __FJCORE__ #include #include @@ -149,6 +151,7 @@ Selector(SelectorWorker * worker_in) {_worker.reset(worker_in);} +#ifndef __FJCORE__ /// ctor from a RangeDefinition /// /// This is provided for backward compatibility and will be removed in @@ -159,6 +162,7 @@ /// the range has gone out of scope. We thus strongly advise against /// the direct use of this constructor. Selector(const RangeDefinition &range); +#endif // __FJCORE__ /// dummy virtual dtor virtual ~Selector(){} @@ -228,6 +232,7 @@ return validated_worker()->has_finite_area(); } +#ifndef __FJCORE__ /// returns the rapidity-phi area associated with the Selector /// (throws InvalidArea if the area does not make sense). /// @@ -247,6 +252,7 @@ /// case of a Monte Carlo area evaluation. /// double area(double ghost_area) const; +#endif // __FJCORE__ /// returns a (reference to) the underlying worker's shared pointer const SharedPtr & worker() const {return _worker;} @@ -454,13 +460,15 @@ /// select PseudoJet with 0 momentum Selector SelectorIsZero(); +#ifndef __FJCORE__ /// select objects that are (or are only made of) ghosts. /// PseudoJets for which has_area() are considered non-pure-ghost. Selector SelectorIsPureGhost(); +#endif // __FJCORE__ /// @} FASTJET_END_NAMESPACE // defined in fastjet/internal/base.hh -#endif // __SELECTOR_HH__ +#endif // __FASTJET_SELECTOR_HH__ diff -Nru fastjet-3.0.3+dfsg/include/fastjet/SharedPtr.hh fastjet-3.0.6+dfsg/include/fastjet/SharedPtr.hh --- fastjet-3.0.3+dfsg/include/fastjet/SharedPtr.hh 2012-06-13 14:14:53.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/SharedPtr.hh 2013-06-05 08:48:37.000000000 +0000 @@ -2,7 +2,7 @@ #define __FASTJET_SHARED_PTR_HH__ //STARTHEADER -// $Id: SharedPtr.hh 2680 2011-11-12 17:12:05Z soyez $ +// $Id: SharedPtr.hh 3129 2013-06-05 08:48:36Z salam $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -34,15 +34,15 @@ // for testing purposes, the following define makes it possible // for our SharedPtr simply to be derived from the STL TR1 one. -// #define USETR1SHAREDPTR +// #define __FASTJET_USETR1SHAREDPTR -#ifdef USETR1SHAREDPTR +#ifdef __FASTJET_USETR1SHAREDPTR #include -#endif // USETR1SHAREDPTR +#endif // __FASTJET_USETR1SHAREDPTR FASTJET_BEGIN_NAMESPACE // defined in fastjet/internal/base.hh -#ifdef USETR1SHAREDPTR +#ifdef __FASTJET_USETR1SHAREDPTR /// @ingroup advanced_usage /// \class SharedPtr @@ -77,7 +77,7 @@ }; -#else // USETR1SHAREDPTR +#else // __FASTJET_USETR1SHAREDPTR /** * @ingroup advanced_usage @@ -389,7 +389,7 @@ return t.get(); } -#endif // USETR1SHAREDPTR +#endif // __FASTJET_USETR1SHAREDPTR FASTJET_END_NAMESPACE // defined in fastjet/internal/base.hh diff -Nru fastjet-3.0.3+dfsg/include/fastjet/config_win.h fastjet-3.0.6+dfsg/include/fastjet/config_win.h --- fastjet-3.0.3+dfsg/include/fastjet/config_win.h 2012-06-25 14:15:32.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/config_win.h 2013-10-28 16:07:59.000000000 +0000 @@ -1,5 +1,5 @@ -#define FASTJET_PACKAGE_STRING "FastJet 3.0.3" -#define FASTJET_PACKAGE_VERSION "3.0.3" +#define FASTJET_PACKAGE_STRING "FastJet 3.0.6" +#define FASTJET_PACKAGE_VERSION "3.0.6" /* The ATLASCone plugin is disabled by default*/ #undef FASTJET_ENABLE_PLUGIN_ATLASCONE diff -Nru fastjet-3.0.3+dfsg/include/fastjet/internal/ClusterSequence_N2.icc fastjet-3.0.6+dfsg/include/fastjet/internal/ClusterSequence_N2.icc --- fastjet-3.0.3+dfsg/include/fastjet/internal/ClusterSequence_N2.icc 2012-06-13 14:14:53.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/internal/ClusterSequence_N2.icc 2013-09-15 08:08:22.000000000 +0000 @@ -1,6 +1,6 @@ // -*- C++ -*- -#ifndef __CLUSTERQUENCE_N2_ICC__ -#define __CLUSTERQUENCE_N2_ICC__ +#ifndef __FASTJET_CLUSTERQUENCE_N2_ICC__ +#define __FASTJET_CLUSTERQUENCE_N2_ICC__ #include "fastjet/ClusterSequence.hh" //STARTHEADER @@ -195,6 +195,6 @@ FASTJET_END_NAMESPACE -#endif // __CLUSTERQUENCE_N2_ICC__ +#endif // __FASTJET_CLUSTERQUENCE_N2_ICC__ diff -Nru fastjet-3.0.3+dfsg/include/fastjet/internal/IsBase.hh fastjet-3.0.6+dfsg/include/fastjet/internal/IsBase.hh --- fastjet-3.0.3+dfsg/include/fastjet/internal/IsBase.hh 2012-06-13 14:14:53.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/internal/IsBase.hh 2013-04-06 07:19:35.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: IsBase.hh 2622 2011-10-05 22:13:23Z soyez $ +// $Id: IsBase.hh 3071 2013-04-01 12:52:46Z cacciari $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -162,7 +162,7 @@ /// derived from B and NULL otherwise template B* cast_if_derived(D* d){ - return IsBaseAndDerived::value ? (B*)(d) : NULL; + return IsBaseAndDerived::value ? (B*)(d) : 0; } diff -Nru fastjet-3.0.3+dfsg/include/fastjet/internal/Makefile.in fastjet-3.0.6+dfsg/include/fastjet/internal/Makefile.in --- fastjet-3.0.3+dfsg/include/fastjet/internal/Makefile.in 2012-06-25 14:16:24.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/internal/Makefile.in 2013-10-28 16:10:51.000000000 +0000 @@ -110,7 +110,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -143,7 +142,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -156,7 +154,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -169,7 +166,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -205,6 +201,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/include/fastjet/internal/SearchTree.hh fastjet-3.0.6+dfsg/include/fastjet/internal/SearchTree.hh --- fastjet-3.0.3+dfsg/include/fastjet/internal/SearchTree.hh 2012-06-13 14:14:53.000000000 +0000 +++ fastjet-3.0.6+dfsg/include/fastjet/internal/SearchTree.hh 2013-05-03 15:47:48.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: SearchTree.hh 2577 2011-09-13 15:11:38Z salam $ +// $Id: SearchTree.hh 3107 2013-05-03 15:47:47Z salam $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -88,7 +88,7 @@ // tracking the depth may have some speed overhead -- so leave it // out for the time being... -#ifdef TRACK_DEPTH +#ifdef __FASTJET_SEARCHTREE_TRACK_DEPTH /// the max depth the tree has ever reached inline unsigned int max_depth() const {return _max_depth;}; #else @@ -128,7 +128,7 @@ unsigned int depth); -#ifdef TRACK_DEPTH +#ifdef __FASTJET_SEARCHTREE_TRACK_DEPTH unsigned int _max_depth; #endif @@ -188,7 +188,8 @@ public: // so that it can access out _node object; - friend class SearchTree::const_circulator; + // note: "class U" needed for clang (v1.1 branches/release_27) compilation + template friend class SearchTree::const_circulator; friend class SearchTree; circulator() : _node(NULL) {} @@ -339,7 +340,7 @@ // reserve space for the list of available nodes //_available_nodes.reserve(); -#ifdef TRACK_DEPTH +#ifdef __FASTJET_SEARCHTREE_TRACK_DEPTH _max_depth = 0; #endif @@ -389,7 +390,7 @@ unsigned int depth ) { -#ifdef TRACK_DEPTH +#ifdef __FASTJET_SEARCHTREE_TRACK_DEPTH // keep track of tree depth for checking things stay reasonable... _max_depth = max(depth, _max_depth); #endif @@ -564,11 +565,11 @@ Node * old_location = NULL; bool on_left = true; // (init not needed -- but soothes g++4) // work through tree until we reach its end -#ifdef TRACK_DEPTH +#ifdef __FASTJET_SEARCHTREE_TRACK_DEPTH unsigned int depth = 0; #endif while(location != NULL) { -#ifdef TRACK_DEPTH +#ifdef __FASTJET_SEARCHTREE_TRACK_DEPTH depth++; #endif old_location = location; @@ -576,7 +577,7 @@ if (on_left) {location = location->left;} else {location = location->right;} } -#ifdef TRACK_DEPTH +#ifdef __FASTJET_SEARCHTREE_TRACK_DEPTH _max_depth = max(depth, _max_depth); #endif // now create tree links diff -Nru fastjet-3.0.3+dfsg/ltmain.sh fastjet-3.0.6+dfsg/ltmain.sh --- fastjet-3.0.3+dfsg/ltmain.sh 2012-06-25 13:55:01.000000000 +0000 +++ fastjet-3.0.6+dfsg/ltmain.sh 2013-04-06 16:44:21.000000000 +0000 @@ -1,9 +1,9 @@ +# Generated from ltmain.m4sh. -# libtool (GNU libtool) 2.4 +# ltmain.sh (GNU libtool) 2.2.6b # Written by Gordon Matzigkeit , 1996 -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, -# 2007, 2008, 2009, 2010 Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. @@ -32,56 +32,50 @@ # # Provide generalized library-building support services. # -# --config show all configuration variables -# --debug enable verbose shell tracing -# -n, --dry-run display commands without modifying any files -# --features display basic configuration information and exit -# --mode=MODE use operation mode MODE -# --preserve-dup-deps don't remove duplicate dependency libraries -# --quiet, --silent don't print informational messages -# --no-quiet, --no-silent -# print informational messages (default) -# --tag=TAG use configuration variables from tag TAG -# -v, --verbose print more informational messages than default -# --no-verbose don't print the extra informational messages -# --version print version information -# -h, --help, --help-all print short, long, or detailed help message +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print informational messages (default) +# --version print version information +# -h, --help print short or long help message # # MODE must be one of the following: # -# clean remove files from the build directory -# compile compile a source file into a libtool object -# execute automatically set library path, then run a program -# finish complete the installation of libtool libraries -# install install libraries or executables -# link create a library or an executable -# uninstall remove libraries from an installed directory +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory # -# MODE-ARGS vary depending on the MODE. When passed as first option, -# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# MODE-ARGS vary depending on the MODE. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # -# host-triplet: $host -# shell: $SHELL -# compiler: $LTCC -# compiler flags: $LTCFLAGS -# linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.4 -# automake: $automake_version -# autoconf: $autoconf_version +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.2.6b +# automake: $automake_version +# autoconf: $autoconf_version # # Report bugs to . -# GNU libtool home page: . -# General help using GNU software: . -PROGRAM=libtool +PROGRAM=ltmain.sh PACKAGE=libtool -VERSION=2.4 +VERSION=2.2.6b TIMESTAMP="" -package_revision=1.3293 +package_revision=1.3017 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then @@ -97,15 +91,10 @@ BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' -} - # NLS nuisances: We save the old values to restore during execute mode. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES @@ -118,24 +107,15 @@ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done -LC_ALL=C -LANGUAGE=C -export LANGUAGE LC_ALL $lt_unset CDPATH -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" : ${CP="cp -f"} -test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${ECHO="echo"} : ${EGREP="/bin/grep -E"} : ${FGREP="/bin/grep -F"} : ${GREP="/bin/grep"} @@ -164,27 +144,6 @@ dirname="s,/[^/]*$,," basename="s,^.*/,," -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} # func_dirname may be replaced by extended shell implementation - - -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "${1}" | $SED "$basename"` -} # func_basename may be replaced by extended shell implementation - - # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: @@ -199,183 +158,33 @@ # those functions but instead duplicate the functionality here. func_dirname_and_basename () { - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi - func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` -} # func_dirname_and_basename may be replaced by extended shell implementation - - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname may be replaced by extended shell implementation - - -# These SED scripts presuppose an absolute path with a trailing slash. -pathcar='s,^/\([^/]*\).*$,\1,' -pathcdr='s,^/[^/]*,,' -removedotparts=':dotsl - s@/\./@/@g - t dotsl - s,/\.$,/,' -collapseslashes='s@/\{1,\}@/@g' -finalslash='s,/*$,/,' - -# func_normal_abspath PATH -# Remove doubled-up and trailing slashes, "." path components, -# and cancel out any ".." path components in PATH after making -# it an absolute path. -# value returned in "$func_normal_abspath_result" -func_normal_abspath () -{ - # Start from root dir and reassemble the path. - func_normal_abspath_result= - func_normal_abspath_tpath=$1 - func_normal_abspath_altnamespace= - case $func_normal_abspath_tpath in - "") - # Empty path, that just means $cwd. - func_stripname '' '/' "`pwd`" - func_normal_abspath_result=$func_stripname_result - return - ;; - # The next three entries are used to spot a run of precisely - # two leading slashes without using negated character classes; - # we take advantage of case's first-match behaviour. - ///*) - # Unusual form of absolute path, do nothing. - ;; - //*) - # Not necessarily an ordinary path; POSIX reserves leading '//' - # and for example Cygwin uses it to access remote file shares - # over CIFS/SMB, so we conserve a leading double slash if found. - func_normal_abspath_altnamespace=/ - ;; - /*) - # Absolute path, do nothing. - ;; - *) - # Relative path, prepend $cwd. - func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath - ;; - esac - # Cancel out all the simple stuff to save iterations. We also want - # the path to end with a slash for ease of parsing, so make sure - # there is one (and only one) here. - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` - while :; do - # Processed it all yet? - if test "$func_normal_abspath_tpath" = / ; then - # If we ascended to the root using ".." the result may be empty now. - if test -z "$func_normal_abspath_result" ; then - func_normal_abspath_result=/ - fi - break - fi - func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcar"` - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcdr"` - # Figure out what to do with it - case $func_normal_abspath_tcomponent in - "") - # Trailing empty path component, ignore it. - ;; - ..) - # Parent dir; strip last assembled component from result. - func_dirname "$func_normal_abspath_result" - func_normal_abspath_result=$func_dirname_result - ;; - *) - # Actual path component, append it. - func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent - ;; - esac - done - # Restore leading double-slash if one was found on entry. - func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` } -# func_relative_path SRCDIR DSTDIR -# generates a relative path from SRCDIR to DSTDIR, with a trailing -# slash if non-empty, suitable for immediately appending a filename -# without needing to append a separator. -# value returned in "$func_relative_path_result" -func_relative_path () -{ - func_relative_path_result= - func_normal_abspath "$1" - func_relative_path_tlibdir=$func_normal_abspath_result - func_normal_abspath "$2" - func_relative_path_tbindir=$func_normal_abspath_result - - # Ascend the tree starting from libdir - while :; do - # check if we have found a prefix of bindir - case $func_relative_path_tbindir in - $func_relative_path_tlibdir) - # found an exact match - func_relative_path_tcancelled= - break - ;; - $func_relative_path_tlibdir*) - # found a matching prefix - func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" - func_relative_path_tcancelled=$func_stripname_result - if test -z "$func_relative_path_result"; then - func_relative_path_result=. - fi - break - ;; - *) - func_dirname $func_relative_path_tlibdir - func_relative_path_tlibdir=${func_dirname_result} - if test "x$func_relative_path_tlibdir" = x ; then - # Have to descend all the way to the root! - func_relative_path_result=../$func_relative_path_result - func_relative_path_tcancelled=$func_relative_path_tbindir - break - fi - func_relative_path_result=../$func_relative_path_result - ;; - esac - done - - # Now calculate path; take care to avoid doubling-up slashes. - func_stripname '' '/' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - func_stripname '/' '/' "$func_relative_path_tcancelled" - if test "x$func_stripname_result" != x ; then - func_relative_path_result=${func_relative_path_result}/${func_stripname_result} - fi +# Generated shell functions inserted here. - # Normalisation. If bindir is libdir, return empty string, - # else relative path ending with a slash; either way, target - # file name can be directly appended. - if test ! -z "$func_relative_path_result"; then - func_stripname './' '' "$func_relative_path_result/" - func_relative_path_result=$func_stripname_result - fi -} +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" # The name of this program: +# In the unlikely event $progname began with a '-', it would play havoc with +# func_echo (imagine progname=-n), so we prepend ./ in that case: func_dirname_and_basename "$progpath" progname=$func_basename_result +case $progname in + -*) progname=./$progname ;; +esac # Make sure we have an absolute path for reexecution: case $progpath in @@ -406,15 +215,6 @@ # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' -# Sed substitution that turns a string into a regex matching for the -# string literally. -sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' - -# Sed substitution that converts a w32 file name or path -# which contains forward slashes, into one that contains -# (escaped) backslashes. A very naive implementation. -lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. @@ -443,7 +243,7 @@ # name if it has been set yet. func_echo () { - $ECHO "$progname: ${opt_mode+$opt_mode: }$*" + $ECHO "$progname${mode+: }$mode: $*" } # func_verbose arg... @@ -458,25 +258,18 @@ : } -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} - # func_error arg... # Echo program name prefixed message to standard error. func_error () { - $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 + $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { - $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 # bash bug again: : @@ -533,9 +326,9 @@ case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop - my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` done - my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do @@ -585,7 +378,7 @@ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi - $ECHO "$my_tmpdir" + $ECHO "X$my_tmpdir" | $Xsed } @@ -599,7 +392,7 @@ { case $1 in *[\\\`\"\$]*) - func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac @@ -626,7 +419,7 @@ { case $1 in *[\\\`\"]*) - my_arg=`$ECHO "$1" | $SED \ + my_arg=`$ECHO "X$1" | $Xsed \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; @@ -695,39 +488,15 @@ fi } -# func_tr_sh -# Turn $1 into a string suitable for a shell variable name. -# Result is stored in $func_tr_sh_result. All characters -# not in the set a-zA-Z0-9_ are replaced with '_'. Further, -# if $1 begins with a digit, a '_' is prepended as well. -func_tr_sh () -{ - case $1 in - [0-9]* | *[!a-zA-Z0-9_]*) - func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` - ;; - * ) - func_tr_sh_result=$1 - ;; - esac -} + + # func_version # Echo version message to standard output and exit. func_version () { - $opt_debug - - $SED -n '/(C)/!b go - :more - /\./!{ - N - s/\n# / / - b more - } - :go - /^# '$PROGRAM' (GNU /,/# warranty; / { + $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ @@ -740,28 +509,22 @@ # Echo short help message to standard output and exit. func_usage () { - $opt_debug - - $SED -n '/^# Usage:/,/^# *.*--help/ { + $SED -n '/^# Usage:/,/# -h/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" - echo + $ECHO $ECHO "run \`$progname --help | more' for full usage" exit $? } -# func_help [NOEXIT] -# Echo long help message to standard output and exit, -# unless 'noexit' is passed as argument. +# func_help +# Echo long help message to standard output and exit. func_help () { - $opt_debug - $SED -n '/^# Usage:/,/# Report bugs to/ { - :print s/^# // s/^# *$// s*\$progname*'$progname'* @@ -774,15 +537,8 @@ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ p - d - } - /^# .* home page:/b print - /^# General help using/b print - ' < "$progpath" - ret=$? - if test -z "$1"; then - exit $ret - fi + }' < "$progpath" + exit $? } # func_missing_arg argname @@ -790,106 +546,63 @@ # exit_cmd. func_missing_arg () { - $opt_debug - - func_error "missing argument for $1." + func_error "missing argument for $1" exit_cmd=exit } +exit_cmd=: -# func_split_short_opt shortopt -# Set func_split_short_opt_name and func_split_short_opt_arg shell -# variables after splitting SHORTOPT after the 2nd character. -func_split_short_opt () -{ - my_sed_short_opt='1s/^\(..\).*$/\1/;q' - my_sed_short_rest='1s/^..\(.*\)$/\1/;q' - - func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` - func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` -} # func_split_short_opt may be replaced by extended shell implementation - - -# func_split_long_opt longopt -# Set func_split_long_opt_name and func_split_long_opt_arg shell -# variables after splitting LONGOPT at the `=' sign. -func_split_long_opt () -{ - my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' - my_sed_long_arg='1s/^--[^=]*=//' - - func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` - func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` -} # func_split_long_opt may be replaced by extended shell implementation -exit_cmd=: +# Check that we have a working $ECHO. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then + # Yippee, $ECHO works! + : +else + # Restart under the correct shell, and then maybe $ECHO will work. + exec $SHELL "$progpath" --no-reexec ${1+"$@"} +fi +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null || echo $max_cmd_len` -} # func_len may be replaced by extended shell implementation - - -# func_lo2o object -func_lo2o () -{ - func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` -} # func_lo2o may be replaced by extended shell implementation - - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` -} # func_xform may be replaced by extended shell implementation - - # func_fatal_configuration arg... # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. @@ -923,16 +636,16 @@ # Display the features supported by this script. func_features () { - echo "host: $host" + $ECHO "host: $host" if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" + $ECHO "enable shared libraries" else - echo "disable shared libraries" + $ECHO "disable shared libraries" fi if test "$build_old_libs" = yes; then - echo "enable static libraries" + $ECHO "enable static libraries" else - echo "disable static libraries" + $ECHO "disable static libraries" fi exit $? @@ -979,204 +692,117 @@ esac } -# func_check_version_match -# Ensure that we are using m4 macros, and libtool script from the same -# release of libtool. -func_check_version_match () +# Parse options once, thoroughly. This comes as soon as possible in +# the script to make things like `libtool --version' happen quickly. { - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from an older release. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - fi - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -$progname: but the definition of this LT_INIT comes from revision $macro_revision. -$progname: You should recreate aclocal.m4 with macros from revision $package_revision -$progname: of $PACKAGE $VERSION and run autoconf again. -_LT_EOF - fi - - exit $EXIT_MISMATCH - fi -} - - -# Shorthand for --mode=foo, only valid as the first argument -case $1 in -clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; -compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; -execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; -finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; -install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; -link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; -uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; -esac - - - -# Option defaults: -opt_debug=: -opt_dry_run=false -opt_config=false -opt_preserve_dup_deps=false -opt_features=false -opt_finish=false -opt_help=false -opt_help_all=false -opt_silent=: -opt_verbose=: -opt_silent=false -opt_verbose=false + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac -# Parse options once, thoroughly. This comes as soon as possible in the -# script to make things like `--version' happen as quickly as we can. -{ - # this just eases exit handling - while test $# -gt 0; do + # Parse non-mode specific arguments: + while test "$#" -gt 0; do opt="$1" shift + case $opt in - --debug|-x) opt_debug='set -x' + --config) func_config ;; + + --debug) preserve_args="$preserve_args $opt" func_echo "enabling shell trace mode" + opt_debug='set -x' $opt_debug ;; - --dry-run|--dryrun|-n) - opt_dry_run=: - ;; - --config) - opt_config=: -func_config - ;; - --dlopen|-dlopen) - optarg="$1" - opt_dlopen="${opt_dlopen+$opt_dlopen -}$optarg" + + -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break + execute_dlfiles="$execute_dlfiles $1" shift ;; - --preserve-dup-deps) - opt_preserve_dup_deps=: - ;; - --features) - opt_features=: -func_features - ;; - --finish) - opt_finish=: -set dummy --mode finish ${1+"$@"}; shift - ;; - --help) - opt_help=: - ;; - --help-all) - opt_help_all=: -opt_help=': help-all' - ;; - --mode) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_mode="$optarg" -case $optarg in - # Valid mode arguments: - clean|compile|execute|finish|install|link|relink|uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $opt" - exit_cmd=exit - break - ;; -esac + + --dry-run | -n) opt_dry_run=: ;; + --features) func_features ;; + --finish) mode="finish" ;; + + --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break + case $1 in + # Valid mode arguments: + clean) ;; + compile) ;; + execute) ;; + finish) ;; + install) ;; + link) ;; + relink) ;; + uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; + esac + + mode="$1" shift ;; - --no-silent|--no-quiet) - opt_silent=false -func_append preserve_args " $opt" - ;; - --no-verbose) - opt_verbose=false -func_append preserve_args " $opt" - ;; - --silent|--quiet) + + --preserve-dup-deps) + opt_duplicate_deps=: ;; + + --quiet|--silent) preserve_args="$preserve_args $opt" opt_silent=: -func_append preserve_args " $opt" - opt_verbose=false ;; - --verbose|-v) - opt_verbose=: -func_append preserve_args " $opt" -opt_silent=false + + --verbose| -v) preserve_args="$preserve_args $opt" + opt_silent=false ;; - --tag) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_tag="$optarg" -func_append preserve_args " $opt $optarg" -func_enable_tag "$optarg" + + --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break + preserve_args="$preserve_args $opt $1" + func_enable_tag "$1" # tagname is set here shift ;; - -\?|-h) func_usage ;; - --help) func_help ;; - --version) func_version ;; - # Separate optargs to long options: - --*=*) - func_split_long_opt "$opt" - set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} + -dlopen=*|--mode=*|--tag=*) + func_opt_split "$opt" + set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} shift ;; - # Separate non-argument short options: - -\?*|-h*|-n*|-v*) - func_split_short_opt "$opt" - set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} - shift - ;; + -\?|-h) func_usage ;; + --help) opt_help=: ;; + --version) func_version ;; + + -*) func_fatal_help "unrecognized option \`$opt'" ;; - --) break ;; - -*) func_fatal_help "unrecognized option \`$opt'" ;; - *) set dummy "$opt" ${1+"$@"}; shift; break ;; + *) nonopt="$opt" + break + ;; esac done - # Validate options: - - # save first non-option argument - if test "$#" -gt 0; then - nonopt="$opt" - shift - fi - - # preserve --debug - test "$opt_debug" = : || func_append preserve_args " --debug" case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) @@ -1184,44 +810,82 @@ opt_duplicate_compiler_generated_deps=: ;; *) - opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + opt_duplicate_compiler_generated_deps=$opt_duplicate_deps ;; esac - $opt_help || { - # Sanity checks first: - func_check_version_match + # Having warned about all mis-specified options, bail out if + # anything was wrong. + $exit_cmd $EXIT_FAILURE +} - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - func_fatal_configuration "not configured to build any kind of library" +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF fi - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" + exit $EXIT_MISMATCH + fi +} - # Only execute mode is allowed to have -dlopen flags. - if test -n "$opt_dlopen" && test "$opt_mode" != execute; then - func_error "unrecognized option \`-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE - fi - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$progname --help --mode=$opt_mode' for more information." - } +## ----------- ## +## Main. ## +## ----------- ## +$opt_help || { + # Sanity checks first: + func_check_version_match - # Bail if the options were screwed - $exit_cmd $EXIT_FAILURE -} + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + test -z "$mode" && func_fatal_error "error: you must specify a MODE." + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$mode' for more information." +} -## ----------- ## -## Main. ## -## ----------- ## # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. @@ -1286,9 +950,12 @@ # temporary ltwrapper_script. func_ltwrapper_scriptname () { - func_dirname_and_basename "$1" "" "." - func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + func_ltwrapper_scriptname_result="" + if func_ltwrapper_executable_p "$1"; then + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + fi } # func_ltwrapper_p file @@ -1334,37 +1001,6 @@ } -# func_resolve_sysroot PATH -# Replace a leading = in PATH with a sysroot. Store the result into -# func_resolve_sysroot_result -func_resolve_sysroot () -{ - func_resolve_sysroot_result=$1 - case $func_resolve_sysroot_result in - =*) - func_stripname '=' '' "$func_resolve_sysroot_result" - func_resolve_sysroot_result=$lt_sysroot$func_stripname_result - ;; - esac -} - -# func_replace_sysroot PATH -# If PATH begins with the sysroot, replace it with = and -# store the result into func_replace_sysroot_result. -func_replace_sysroot () -{ - case "$lt_sysroot:$1" in - ?*:"$lt_sysroot"*) - func_stripname "$lt_sysroot" '' "$1" - func_replace_sysroot_result="=$func_stripname_result" - ;; - *) - # Including no sysroot. - func_replace_sysroot_result=$1 - ;; - esac -} - # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. @@ -1377,15 +1013,13 @@ if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do - func_append_quoted CC_quoted "$arg" + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) @@ -1396,13 +1030,11 @@ CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. - func_append_quoted CC_quoted "$arg" + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. @@ -1465,486 +1097,6 @@ } } - -################################################## -# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS # -################################################## - -# func_convert_core_file_wine_to_w32 ARG -# Helper function used by file name conversion functions when $build is *nix, -# and $host is mingw, cygwin, or some other w32 environment. Relies on a -# correctly configured wine environment available, with the winepath program -# in $build's $PATH. -# -# ARG is the $build file name to be converted to w32 format. -# Result is available in $func_convert_core_file_wine_to_w32_result, and will -# be empty on error (or when ARG is empty) -func_convert_core_file_wine_to_w32 () -{ - $opt_debug - func_convert_core_file_wine_to_w32_result="$1" - if test -n "$1"; then - # Unfortunately, winepath does not exit with a non-zero error code, so we - # are forced to check the contents of stdout. On the other hand, if the - # command is not found, the shell will set an exit code of 127 and print - # *an error message* to stdout. So we must check for both error code of - # zero AND non-empty stdout, which explains the odd construction: - func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null` - if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then - func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | - $SED -e "$lt_sed_naive_backslashify"` - else - func_convert_core_file_wine_to_w32_result= - fi - fi -} -# end: func_convert_core_file_wine_to_w32 - - -# func_convert_core_path_wine_to_w32 ARG -# Helper function used by path conversion functions when $build is *nix, and -# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly -# configured wine environment available, with the winepath program in $build's -# $PATH. Assumes ARG has no leading or trailing path separator characters. -# -# ARG is path to be converted from $build format to win32. -# Result is available in $func_convert_core_path_wine_to_w32_result. -# Unconvertible file (directory) names in ARG are skipped; if no directory names -# are convertible, then the result may be empty. -func_convert_core_path_wine_to_w32 () -{ - $opt_debug - # unfortunately, winepath doesn't convert paths, only file names - func_convert_core_path_wine_to_w32_result="" - if test -n "$1"; then - oldIFS=$IFS - IFS=: - for func_convert_core_path_wine_to_w32_f in $1; do - IFS=$oldIFS - func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" - if test -n "$func_convert_core_file_wine_to_w32_result" ; then - if test -z "$func_convert_core_path_wine_to_w32_result"; then - func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" - else - func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" - fi - fi - done - IFS=$oldIFS - fi -} -# end: func_convert_core_path_wine_to_w32 - - -# func_cygpath ARGS... -# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when -# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) -# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or -# (2), returns the Cygwin file name or path in func_cygpath_result (input -# file name or path is assumed to be in w32 format, as previously converted -# from $build's *nix or MSYS format). In case (3), returns the w32 file name -# or path in func_cygpath_result (input file name or path is assumed to be in -# Cygwin format). Returns an empty string on error. -# -# ARGS are passed to cygpath, with the last one being the file name or path to -# be converted. -# -# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH -# environment variable; do not put it in $PATH. -func_cygpath () -{ - $opt_debug - if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then - func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` - if test "$?" -ne 0; then - # on failure, ensure result is empty - func_cygpath_result= - fi - else - func_cygpath_result= - func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" - fi -} -#end: func_cygpath - - -# func_convert_core_msys_to_w32 ARG -# Convert file name or path ARG from MSYS format to w32 format. Return -# result in func_convert_core_msys_to_w32_result. -func_convert_core_msys_to_w32 () -{ - $opt_debug - # awkward: cmd appends spaces to result - func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | - $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` -} -#end: func_convert_core_msys_to_w32 - - -# func_convert_file_check ARG1 ARG2 -# Verify that ARG1 (a file name in $build format) was converted to $host -# format in ARG2. Otherwise, emit an error message, but continue (resetting -# func_to_host_file_result to ARG1). -func_convert_file_check () -{ - $opt_debug - if test -z "$2" && test -n "$1" ; then - func_error "Could not determine host file name corresponding to" - func_error " \`$1'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback: - func_to_host_file_result="$1" - fi -} -# end func_convert_file_check - - -# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH -# Verify that FROM_PATH (a path in $build format) was converted to $host -# format in TO_PATH. Otherwise, emit an error message, but continue, resetting -# func_to_host_file_result to a simplistic fallback value (see below). -func_convert_path_check () -{ - $opt_debug - if test -z "$4" && test -n "$3"; then - func_error "Could not determine the host path corresponding to" - func_error " \`$3'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback. This is a deliberately simplistic "conversion" and - # should not be "improved". See libtool.info. - if test "x$1" != "x$2"; then - lt_replace_pathsep_chars="s|$1|$2|g" - func_to_host_path_result=`echo "$3" | - $SED -e "$lt_replace_pathsep_chars"` - else - func_to_host_path_result="$3" - fi - fi -} -# end func_convert_path_check - - -# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG -# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT -# and appending REPL if ORIG matches BACKPAT. -func_convert_path_front_back_pathsep () -{ - $opt_debug - case $4 in - $1 ) func_to_host_path_result="$3$func_to_host_path_result" - ;; - esac - case $4 in - $2 ) func_append func_to_host_path_result "$3" - ;; - esac -} -# end func_convert_path_front_back_pathsep - - -################################################## -# $build to $host FILE NAME CONVERSION FUNCTIONS # -################################################## -# invoked via `$to_host_file_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# Result will be available in $func_to_host_file_result. - - -# func_to_host_file ARG -# Converts the file name ARG from $build format to $host format. Return result -# in func_to_host_file_result. -func_to_host_file () -{ - $opt_debug - $to_host_file_cmd "$1" -} -# end func_to_host_file - - -# func_to_tool_file ARG LAZY -# converts the file name ARG from $build format to toolchain format. Return -# result in func_to_tool_file_result. If the conversion in use is listed -# in (the comma separated) LAZY, no conversion takes place. -func_to_tool_file () -{ - $opt_debug - case ,$2, in - *,"$to_tool_file_cmd",*) - func_to_tool_file_result=$1 - ;; - *) - $to_tool_file_cmd "$1" - func_to_tool_file_result=$func_to_host_file_result - ;; - esac -} -# end func_to_tool_file - - -# func_convert_file_noop ARG -# Copy ARG to func_to_host_file_result. -func_convert_file_noop () -{ - func_to_host_file_result="$1" -} -# end func_convert_file_noop - - -# func_convert_file_msys_to_w32 ARG -# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_file_result. -func_convert_file_msys_to_w32 () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_to_host_file_result="$func_convert_core_msys_to_w32_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_w32 - - -# func_convert_file_cygwin_to_w32 ARG -# Convert file name ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_file_cygwin_to_w32 () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - # because $build is cygwin, we call "the" cygpath in $PATH; no need to use - # LT_CYGPATH in this case. - func_to_host_file_result=`cygpath -m "$1"` - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_cygwin_to_w32 - - -# func_convert_file_nix_to_w32 ARG -# Convert file name ARG from *nix to w32 format. Requires a wine environment -# and a working winepath. Returns result in func_to_host_file_result. -func_convert_file_nix_to_w32 () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - func_convert_core_file_wine_to_w32 "$1" - func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_w32 - - -# func_convert_file_msys_to_cygwin ARG -# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_file_msys_to_cygwin () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_cygpath -u "$func_convert_core_msys_to_w32_result" - func_to_host_file_result="$func_cygpath_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_cygwin - - -# func_convert_file_nix_to_cygwin ARG -# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed -# in a wine environment, working winepath, and LT_CYGPATH set. Returns result -# in func_to_host_file_result. -func_convert_file_nix_to_cygwin () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. - func_convert_core_file_wine_to_w32 "$1" - func_cygpath -u "$func_convert_core_file_wine_to_w32_result" - func_to_host_file_result="$func_cygpath_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_cygwin - - -############################################# -# $build to $host PATH CONVERSION FUNCTIONS # -############################################# -# invoked via `$to_host_path_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# The result will be available in $func_to_host_path_result. -# -# Path separators are also converted from $build format to $host format. If -# ARG begins or ends with a path separator character, it is preserved (but -# converted to $host format) on output. -# -# All path conversion functions are named using the following convention: -# file name conversion function : func_convert_file_X_to_Y () -# path conversion function : func_convert_path_X_to_Y () -# where, for any given $build/$host combination the 'X_to_Y' value is the -# same. If conversion functions are added for new $build/$host combinations, -# the two new functions must follow this pattern, or func_init_to_host_path_cmd -# will break. - - -# func_init_to_host_path_cmd -# Ensures that function "pointer" variable $to_host_path_cmd is set to the -# appropriate value, based on the value of $to_host_file_cmd. -to_host_path_cmd= -func_init_to_host_path_cmd () -{ - $opt_debug - if test -z "$to_host_path_cmd"; then - func_stripname 'func_convert_file_' '' "$to_host_file_cmd" - to_host_path_cmd="func_convert_path_${func_stripname_result}" - fi -} - - -# func_to_host_path ARG -# Converts the path ARG from $build format to $host format. Return result -# in func_to_host_path_result. -func_to_host_path () -{ - $opt_debug - func_init_to_host_path_cmd - $to_host_path_cmd "$1" -} -# end func_to_host_path - - -# func_convert_path_noop ARG -# Copy ARG to func_to_host_path_result. -func_convert_path_noop () -{ - func_to_host_path_result="$1" -} -# end func_convert_path_noop - - -# func_convert_path_msys_to_w32 ARG -# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_path_result. -func_convert_path_msys_to_w32 () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # Remove leading and trailing path separator characters from ARG. MSYS - # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; - # and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_msys_to_w32_result" - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_msys_to_w32 - - -# func_convert_path_cygwin_to_w32 ARG -# Convert path ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_path_cygwin_to_w32 () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_cygwin_to_w32 - - -# func_convert_path_nix_to_w32 ARG -# Convert path ARG from *nix to w32 format. Requires a wine environment and -# a working winepath. Returns result in func_to_host_file_result. -func_convert_path_nix_to_w32 () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_nix_to_w32 - - -# func_convert_path_msys_to_cygwin ARG -# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_path_msys_to_cygwin () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_msys_to_w32_result" - func_to_host_path_result="$func_cygpath_result" - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi -} -# end func_convert_path_msys_to_cygwin - - -# func_convert_path_nix_to_cygwin ARG -# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a -# a wine environment, working winepath, and LT_CYGPATH set. Returns result in -# func_to_host_file_result. -func_convert_path_nix_to_cygwin () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # Remove leading and trailing path separator characters from - # ARG. msys behavior is inconsistent here, cygpath turns them - # into '.;' and ';.', and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" - func_to_host_path_result="$func_cygpath_result" - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi -} -# end func_convert_path_nix_to_cygwin - - # func_mode_compile arg... func_mode_compile () { @@ -1985,12 +1137,12 @@ ;; -pie | -fpie | -fPIE) - func_append pie_flag " $arg" + pie_flag="$pie_flag $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) - func_append later " $arg" + later="$later $arg" continue ;; @@ -2011,14 +1163,15 @@ save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" - func_append_quoted lastarg "$arg" + func_quote_for_eval "$arg" + lastarg="$lastarg $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. - func_append base_compile " $lastarg" + base_compile="$base_compile $lastarg" continue ;; @@ -2034,7 +1187,8 @@ esac # case $arg_mode # Aesthetically quote the previous argument. - func_append_quoted base_compile "$lastarg" + func_quote_for_eval "$lastarg" + base_compile="$base_compile $func_quote_for_eval_result" done # for arg case $arg_mode in @@ -2059,7 +1213,7 @@ *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ - *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup) + *.[fF][09]? | *.for | *.java | *.obj | *.sx) func_xform "$libobj" libobj=$func_xform_result ;; @@ -2134,7 +1288,7 @@ # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then - output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} + output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= @@ -2165,16 +1319,17 @@ $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi - func_append removelist " $output_obj" + removelist="$removelist $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist - func_append removelist " $lockfile" + removelist="$removelist $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 - srcfile=$func_to_tool_file_result + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result @@ -2194,7 +1349,7 @@ if test -z "$output_obj"; then # Place PIC objects in $objdir - func_append command " -o $lobj" + command="$command -o $lobj" fi func_show_eval_locale "$command" \ @@ -2241,11 +1396,11 @@ command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then - func_append command " -o $obj" + command="$command -o $obj" fi # Suppress compiler output if we already did a PIC compilation. - func_append command "$suppress_output" + command="$command$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' @@ -2290,13 +1445,13 @@ } $opt_help || { - test "$opt_mode" = compile && func_mode_compile ${1+"$@"} +test "$mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. - case $opt_mode in + case $mode in "") # Generic help is extracted from the usage comments # at the start of this file. @@ -2327,11 +1482,10 @@ -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes - -prefer-pic try to build PIC objects only - -prefer-non-pic try to build non-PIC objects only + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking - -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. @@ -2384,7 +1538,7 @@ The following components of INSTALL-COMMAND are treated specially: - -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." @@ -2404,8 +1558,6 @@ -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible - -bindir BINDIR specify path to binaries directory (for systems where - libraries must be found in the PATH setting at runtime) -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) @@ -2434,11 +1586,6 @@ -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface - -Wc,FLAG - -Xcompiler FLAG pass linker-specific FLAG directly to the compiler - -Wl,FLAG - -Xlinker FLAG pass linker-specific FLAG directly to the linker - -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with \`-') are ignored. @@ -2472,44 +1619,18 @@ ;; *) - func_fatal_help "invalid operation mode \`$opt_mode'" + func_fatal_help "invalid operation mode \`$mode'" ;; esac - echo + $ECHO $ECHO "Try \`$progname --help' for more information about other modes." + + exit $? } -# Now that we've collected a possible --mode arg, show help if necessary -if $opt_help; then - if test "$opt_help" = :; then - func_mode_help - else - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - func_mode_help - done - } | sed -n '1p; 2,$s/^Usage:/ or: /p' - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - echo - func_mode_help - done - } | - sed '1d - /^When reporting/,/^Report/{ - H - d - } - $x - /information about other modes/d - /more detailed .*MODE/d - s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' - fi - exit $? -fi + # Now that we've collected a possible --mode arg, show help if necessary + $opt_help && func_mode_help # func_mode_execute arg... @@ -2522,16 +1643,13 @@ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. - for file in $opt_dlopen; do + for file in $execute_dlfiles; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" @@ -2553,7 +1671,7 @@ dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then - func_append dir "/$objdir" + dir="$dir/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" @@ -2594,7 +1712,7 @@ for file do case $file in - -* | *.la | *.lo ) ;; + -*) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then @@ -2610,7 +1728,8 @@ ;; esac # Quote arguments (to preserve shell metacharacters). - func_append_quoted args "$file" + func_quote_for_eval "$file" + args="$args $func_quote_for_eval_result" done if test "X$opt_dry_run" = Xfalse; then @@ -2635,66 +1754,29 @@ # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - echo "export $shlibpath_var" + $ECHO "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi -} - -test "$opt_mode" = execute && func_mode_execute ${1+"$@"} - - -# func_mode_finish arg... -func_mode_finish () -{ - $opt_debug - libs= - libdirs= - admincmds= - - for opt in "$nonopt" ${1+"$@"} - do - if test -d "$opt"; then - func_append libdirs " $opt" - - elif test -f "$opt"; then - if func_lalib_unsafe_p "$opt"; then - func_append libs " $opt" - else - func_warning "\`$opt' is not a valid libtool archive" - fi +} - else - func_fatal_error "invalid argument \`$opt'" - fi - done +test "$mode" = execute && func_mode_execute ${1+"$@"} - if test -n "$libs"; then - if test -n "$lt_sysroot"; then - sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` - sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" - else - sysroot_cmd= - fi - # Remove sysroot references - if $opt_dry_run; then - for lib in $libs; do - echo "removing references to $lt_sysroot and \`=' prefixes from $lib" - done - else - tmpdir=`func_mktempdir` - for lib in $libs; do - sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ - > $tmpdir/tmp-la - mv -f $tmpdir/tmp-la $lib - done - ${RM}r "$tmpdir" - fi - fi +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libdirs="$nonopt" + admincmds= if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. @@ -2704,7 +1786,7 @@ if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" - $opt_dry_run || eval "$cmds" || func_append admincmds " + $opt_dry_run || eval "$cmds" || admincmds="$admincmds $cmds" fi done @@ -2713,55 +1795,53 @@ # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - $ECHO " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $ECHO " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $ECHO " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - echo + $ECHO "X----------------------------------------------------------------------" | $Xsed + $ECHO "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + $ECHO + $ECHO "If you ever happen to want to link against installed libraries" + $ECHO "in a given directory, LIBDIR, you must either use libtool, and" + $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" + $ECHO "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" + $ECHO " during execution" + fi + if test -n "$runpath_var"; then + $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" + $ECHO " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" - echo "See any operating system documentation about shared libraries for" - case $host in - solaris2.[6789]|solaris2.1[0-9]) - echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" - echo "pages." - ;; - *) - echo "more information, such as the ld(1) and ld.so(8) manual pages." - ;; - esac - echo "----------------------------------------------------------------------" + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi + $ECHO + + $ECHO "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" + $ECHO "pages." + ;; + *) + $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + $ECHO "X----------------------------------------------------------------------" | $Xsed exit $EXIT_SUCCESS } -test "$opt_mode" = finish && func_mode_finish ${1+"$@"} +test "$mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... @@ -2772,7 +1852,7 @@ # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. - case $nonopt in *shtool*) :;; *) false;; esac; then + $ECHO "X$nonopt" | $GREP shtool >/dev/null; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " @@ -2786,12 +1866,7 @@ # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" - func_append install_prog "$func_quote_for_eval_result" - install_shared_prog=$install_prog - case " $install_prog " in - *[\\\ /]cp\ *) install_cp=: ;; - *) install_cp=false ;; - esac + install_prog="$install_prog$func_quote_for_eval_result" # We need to accept at least all the BSD install flags. dest= @@ -2801,12 +1876,10 @@ install_type= isdir=no stripme= - no_mode=: for arg do - arg2= if test -n "$dest"; then - func_append files " $dest" + files="$files $dest" dest=$arg continue fi @@ -2814,9 +1887,10 @@ case $arg in -d) isdir=yes ;; -f) - if $install_cp; then :; else - prev=$arg - fi + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac ;; -g | -m | -o) prev=$arg @@ -2830,10 +1904,6 @@ *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then - if test "x$prev" = x-m && test -n "$install_override_mode"; then - arg2=$install_override_mode - no_mode=false - fi prev= else dest=$arg @@ -2844,11 +1914,7 @@ # Aesthetically quote the argument. func_quote_for_eval "$arg" - func_append install_prog " $func_quote_for_eval_result" - if test -n "$arg2"; then - func_quote_for_eval "$arg2" - fi - func_append install_shared_prog " $func_quote_for_eval_result" + install_prog="$install_prog $func_quote_for_eval_result" done test -z "$install_prog" && \ @@ -2857,13 +1923,6 @@ test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" - if test -n "$install_override_mode" && $no_mode; then - if $install_cp; then :; else - func_quote_for_eval "$install_override_mode" - func_append install_shared_prog " -m $func_quote_for_eval_result" - fi - fi - if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" @@ -2918,13 +1977,10 @@ case $file in *.$libext) # Do the static libraries later. - func_append staticlibs " $file" + staticlibs="$staticlibs $file" ;; *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" @@ -2938,23 +1994,23 @@ if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; - *) func_append current_libdirs " $libdir" ;; + *) current_libdirs="$current_libdirs $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; - *) func_append future_libdirs " $libdir" ;; + *) future_libdirs="$future_libdirs $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" - func_append dir "$objdir" + dir="$dir$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that @@ -2967,9 +2023,9 @@ if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" @@ -2987,7 +2043,7 @@ test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. - func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in @@ -3027,7 +2083,7 @@ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. - test -n "$old_library" && func_append staticlibs " $dir/$old_library" + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ;; *.lo) @@ -3127,7 +2183,7 @@ if test -f "$lib"; then func_source "$lib" fi - libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no @@ -3146,7 +2202,7 @@ file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. - relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" @@ -3165,7 +2221,7 @@ } else # Install the binary that we compiled earlier. - file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi @@ -3224,7 +2280,7 @@ fi } -test "$opt_mode" = install && func_mode_install ${1+"$@"} +test "$mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p @@ -3267,22 +2323,6 @@ extern \"C\" { #endif -#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) -#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" -#endif - -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - /* External symbol declarations for the compiler. */\ " @@ -3292,11 +2332,10 @@ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. - progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for progfile in $progfiles; do - func_to_tool_file "$progfile" func_convert_file_msys_to_w32 - func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" - $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + func_verbose "extracting global C symbols from \`$progfile'" + $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then @@ -3332,7 +2371,7 @@ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in - *cygwin* | *mingw* | *cegcc* ) + *cygwin | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; @@ -3345,52 +2384,10 @@ func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" - case $host in - *cygwin* | *mingw* | *cegcc* ) - # if an import library, we need to obtain dlname - if func_win32_import_lib_p "$dlprefile"; then - func_tr_sh "$dlprefile" - eval "curr_lafile=\$libfile_$func_tr_sh_result" - dlprefile_dlbasename="" - if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then - # Use subshell, to avoid clobbering current variable values - dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` - if test -n "$dlprefile_dlname" ; then - func_basename "$dlprefile_dlname" - dlprefile_dlbasename="$func_basename_result" - else - # no lafile. user explicitly requested -dlpreopen . - $sharedlib_from_linklib_cmd "$dlprefile" - dlprefile_dlbasename=$sharedlib_from_linklib_result - fi - fi - $opt_dry_run || { - if test -n "$dlprefile_dlbasename" ; then - eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' - else - func_warning "Could not compute DLL name from $name" - eval '$ECHO ": $name " >> "$nlist"' - fi - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | - $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" - } - else # not an import lib - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - fi - ;; - *) - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - ;; - esac + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } done $opt_dry_run || { @@ -3418,19 +2415,36 @@ if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else - echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" fi - echo >> "$output_objdir/$my_dlsyms" "\ + $ECHO >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; -extern LT_DLSYM_CONST lt_dlsymlist +" + case $host in + *cygwin* | *mingw* | *cegcc* ) + $ECHO >> "$output_objdir/$my_dlsyms" "\ +/* DATA imports from DLLs on WIN32 con't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs. */" + lt_dlsym_const= ;; + *osf5*) + echo >> "$output_objdir/$my_dlsyms" "\ +/* This system does not cope well with relocations in const data */" + lt_dlsym_const= ;; + *) + lt_dlsym_const=const ;; + esac + + $ECHO >> "$output_objdir/$my_dlsyms" "\ +extern $lt_dlsym_const lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; -LT_DLSYM_CONST lt_dlsymlist +$lt_dlsym_const lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," @@ -3443,7 +2457,7 @@ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac - echo >> "$output_objdir/$my_dlsyms" "\ + $ECHO >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; @@ -3486,7 +2500,7 @@ for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; - *) func_append symtab_cflags " $arg" ;; + *) symtab_cflags="$symtab_cflags $arg" ;; esac done @@ -3501,16 +2515,16 @@ case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` fi ;; *) - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ;; esac ;; @@ -3524,8 +2538,8 @@ # really was required. # Nullify the symbol file. - compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi } @@ -3535,7 +2549,6 @@ # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. -# Despite the name, also deal with 64 bit binaries. func_win32_libid () { $opt_debug @@ -3546,11 +2559,9 @@ win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static - # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then - func_to_tool_file "$1" func_convert_file_msys_to_w32 - win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | $SED -n -e ' 1,100{ / I /{ @@ -3579,131 +2590,6 @@ $ECHO "$win32_libid_type" } -# func_cygming_dll_for_implib ARG -# -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib () -{ - $opt_debug - sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` -} - -# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs -# -# The is the core of a fallback implementation of a -# platform-specific function to extract the name of the -# DLL associated with the specified import library LIBNAME. -# -# SECTION_NAME is either .idata$6 or .idata$7, depending -# on the platform and compiler that created the implib. -# -# Echos the name of the DLL associated with the -# specified import library. -func_cygming_dll_for_implib_fallback_core () -{ - $opt_debug - match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` - $OBJDUMP -s --section "$1" "$2" 2>/dev/null | - $SED '/^Contents of section '"$match_literal"':/{ - # Place marker at beginning of archive member dllname section - s/.*/====MARK====/ - p - d - } - # These lines can sometimes be longer than 43 characters, but - # are always uninteresting - /:[ ]*file format pe[i]\{,1\}-/d - /^In archive [^:]*:/d - # Ensure marker is printed - /^====MARK====/p - # Remove all lines with less than 43 characters - /^.\{43\}/!d - # From remaining lines, remove first 43 characters - s/^.\{43\}//' | - $SED -n ' - # Join marker and all lines until next marker into a single line - /^====MARK====/ b para - H - $ b para - b - :para - x - s/\n//g - # Remove the marker - s/^====MARK====// - # Remove trailing dots and whitespace - s/[\. \t]*$// - # Print - /./p' | - # we now have a list, one entry per line, of the stringified - # contents of the appropriate section of all members of the - # archive which possess that section. Heuristic: eliminate - # all those which have a first or second character that is - # a '.' (that is, objdump's representation of an unprintable - # character.) This should work for all archives with less than - # 0x302f exports -- but will fail for DLLs whose name actually - # begins with a literal '.' or a single character followed by - # a '.'. - # - # Of those that remain, print the first one. - $SED -e '/^\./d;/^.\./d;q' -} - -# func_cygming_gnu_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is a GNU/binutils-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_gnu_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` - test -n "$func_cygming_gnu_implib_tmp" -} - -# func_cygming_ms_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is an MS-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_ms_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` - test -n "$func_cygming_ms_implib_tmp" -} - -# func_cygming_dll_for_implib_fallback ARG -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# -# This fallback implementation is for use when $DLLTOOL -# does not support the --identify-strict option. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib_fallback () -{ - $opt_debug - if func_cygming_gnu_implib_p "$1" ; then - # binutils import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` - elif func_cygming_ms_implib_p "$1" ; then - # ms-generated import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` - else - # unknown - sharedlib_from_linklib_result="" - fi -} # func_extract_an_archive dir oldlib @@ -3712,18 +2598,7 @@ $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" - if test "$lock_old_archive_extraction" = yes; then - lockfile=$f_ex_an_ar_oldlib.lock - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - fi - func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ - 'stat=$?; rm -f "$lockfile"; exit $stat' - if test "$lock_old_archive_extraction" = yes; then - $opt_dry_run || rm -f "$lockfile" - fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else @@ -3794,7 +2669,7 @@ darwin_file= darwin_files= for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ @@ -3809,30 +2684,25 @@ func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done func_extract_archives_result="$my_oldobjs" } -# func_emit_wrapper [arg=no] -# -# Emit a libtool wrapper script on stdout. -# Don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw -# wrapper executable. Must ONLY be called from within -# func_mode_link because it depends on a number of variables -# set therein. + +# func_emit_wrapper_part1 [arg=no] # -# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -# variable will take. If 'yes', then the emitted script -# will assume that the directory in which it is stored is -# the $objdir directory. This is a cygwin/mingw-specific -# behavior. -func_emit_wrapper () -{ - func_emit_wrapper_arg1=${1-no} +# Emit the first part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part1 () +{ + func_emit_wrapper_part1_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part1_arg1=$1 + fi $ECHO "\ #! $SHELL @@ -3848,6 +2718,7 @@ # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # Be Bourne compatible @@ -3878,132 +2749,31 @@ else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then - file=\"\$0\"" - - qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` - $ECHO "\ - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - ECHO=\"$qECHO\" - fi - -# Very basic option parsing. These options are (a) specific to -# the libtool wrapper, (b) are identical between the wrapper -# /script/ and the wrapper /executable/ which is used only on -# windows platforms, and (c) all begin with the string "--lt-" -# (application programs are unlikely to have options which match -# this pattern). -# -# There are only two supported options: --lt-debug and -# --lt-dump-script. There is, deliberately, no --lt-help. -# -# The first argument to this parsing function should be the -# script's $0 value, followed by "$@". -lt_option_debug= -func_parse_lt_options () -{ - lt_script_arg0=\$0 - shift - for lt_opt - do - case \"\$lt_opt\" in - --lt-debug) lt_option_debug=1 ;; - --lt-dump-script) - lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` - test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. - lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` - cat \"\$lt_dump_D/\$lt_dump_F\" - exit 0 - ;; - --lt-*) - \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 - exit 1 - ;; - esac - done - - # Print the debug banner immediately: - if test -n \"\$lt_option_debug\"; then - echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 - fi -} - -# Used when --lt-debug. Prints its arguments to stdout -# (redirection is the responsibility of the caller) -func_lt_dump_args () -{ - lt_dump_args_N=1; - for lt_arg - do - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" - lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` - done -} - -# Core function for launching the target application -func_exec_program_core () -{ -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2* | *-cegcc*) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; - - *) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir/\$program\" \${1+\"\$@\"} + ECHO=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$ECHO works! + : + else + # Restart under the correct shell, and then maybe \$ECHO will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ " - ;; - esac - $ECHO "\ - \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 - exit 1 -} - -# A function to encapsulate launching the target application -# Strips options in the --lt-* namespace from \$@ and -# launches target application with the remaining arguments. -func_exec_program () -{ - for lt_wr_arg - do - case \$lt_wr_arg in - --lt-*) ;; - *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; - esac - shift - done - func_exec_program_core \${1+\"\$@\"} -} - - # Parse options - func_parse_lt_options \"\$0\" \${1+\"\$@\"} + $ECHO "\ # Find the directory that this script lives in. - thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` while test -n \"\$file\"; do - destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then @@ -4013,13 +2783,30 @@ esac fi - file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` done +" +} +# end: func_emit_wrapper_part1 + +# func_emit_wrapper_part2 [arg=no] +# +# Emit the second part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part2 () +{ + func_emit_wrapper_part2_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part2_arg1=$1 + fi + + $ECHO "\ # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then @@ -4027,7 +2814,7 @@ fi # remove .libs from thisdir case \"\$thisdir\" in - *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi @@ -4082,18 +2869,6 @@ if test -f \"\$progdir/\$program\"; then" - # fixup the dll searchpath if we need to. - # - # Fix the DLL searchpath if we need to. Do this before prepending - # to shlibpath, because on Windows, both are PATH and uninstalled - # libraries must come first. - if test -n "$dllsearchpath"; then - $ECHO "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ @@ -4102,28 +2877,253 @@ # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` export $shlibpath_var " fi + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. - func_exec_program \${1+\"\$@\"} +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 - \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi -fi\ -" +fi\ +" +} +# end: func_emit_wrapper_part2 + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=no + if test -n "$1" ; then + func_emit_wrapper_arg1=$1 + fi + + # split this up so that func_emit_cwrapperexe_src + # can call each part independently. + func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" + func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" +} + + +# func_to_host_path arg +# +# Convert paths to host format when used with build tools. +# Intended for use with "native" mingw (where libtool itself +# is running under the msys shell), or in the following cross- +# build environments: +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# where wine is equipped with the `winepath' executable. +# In the native mingw case, the (msys) shell automatically +# converts paths for any non-msys applications it launches, +# but that facility isn't available from inside the cwrapper. +# Similar accommodations are necessary for $host mingw and +# $build cygwin. Calling this function does no harm for other +# $host/$build combinations not listed above. +# +# ARG is the path (on $build) that should be converted to +# the proper representation for $host. The result is stored +# in $func_to_host_path_result. +func_to_host_path () +{ + func_to_host_path_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + case $build in + *mingw* ) # actually, msys + # awkward: cmd appends spaces to result + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_path_tmp1=`( cmd //c echo "$1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_path_tmp1=`cygpath -w "$1"` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # Unfortunately, winepath does not exit with a non-zero + # error code, so we are forced to check the contents of + # stdout. On the other hand, if the command is not + # found, the shell will set an exit code of 127 and print + # *an error message* to stdout. So we must check for both + # error code of zero AND non-empty stdout, which explains + # the odd construction: + func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` + if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + else + # Allow warning below. + func_to_host_path_result="" + fi + ;; + esac + if test -z "$func_to_host_path_result" ; then + func_error "Could not determine host path corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_path_result="$1" + fi + ;; + esac + fi +} +# end: func_to_host_path + +# func_to_host_pathlist arg +# +# Convert pathlists to host format when used with build tools. +# See func_to_host_path(), above. This function supports the +# following $build/$host combinations (but does no harm for +# combinations not listed here): +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# +# Path separators are also converted from $build format to +# $host format. If ARG begins or ends with a path separator +# character, it is preserved (but converted to $host format) +# on output. +# +# ARG is a pathlist (on $build) that should be converted to +# the proper representation on $host. The result is stored +# in $func_to_host_pathlist_result. +func_to_host_pathlist () +{ + func_to_host_pathlist_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_to_host_pathlist_tmp2="$1" + # Once set for this call, this variable should not be + # reassigned. It is used in tha fallback case. + func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e 's|^:*||' -e 's|:*$||'` + case $build in + *mingw* ) # Actually, msys. + # Awkward: cmd appends spaces to result. + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # unfortunately, winepath doesn't convert pathlists + func_to_host_pathlist_result="" + func_to_host_pathlist_oldIFS=$IFS + IFS=: + for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do + IFS=$func_to_host_pathlist_oldIFS + if test -n "$func_to_host_pathlist_f" ; then + func_to_host_path "$func_to_host_pathlist_f" + if test -n "$func_to_host_path_result" ; then + if test -z "$func_to_host_pathlist_result" ; then + func_to_host_pathlist_result="$func_to_host_path_result" + else + func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" + fi + fi + fi + IFS=: + done + IFS=$func_to_host_pathlist_oldIFS + ;; + esac + if test -z "$func_to_host_pathlist_result" ; then + func_error "Could not determine the host path(s) corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This may break if $1 contains DOS-style drive + # specifications. The fix is not to complicate the expression + # below, but for the user to provide a working wine installation + # with winepath so that path translation in the cross-to-mingw + # case works properly. + lt_replace_pathsep_nix_to_dos="s|:|;|g" + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_replace_pathsep_nix_to_dos"` + fi + # Now, add the leading and trailing path separators back + case "$1" in + :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" + ;; + esac + case "$1" in + *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" + ;; + esac + ;; + esac + fi } - +# end: func_to_host_pathlist # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout @@ -4141,23 +3141,31 @@ This wrapper executable should never be moved out of the build directory. If it is, it will not operate correctly. + + Currently, it simply execs the wrapper *script* "$SHELL $output", + but could eventually absorb all of the scripts functionality and + exec $objdir/$outputname directly. */ EOF cat <<"EOF" -#ifdef _MSC_VER -# define _CRT_SECURE_NO_DEPRECATE 1 -#endif #include #include #ifdef _MSC_VER # include # include # include +# define setmode _setmode #else # include # include # ifdef __CYGWIN__ # include +# define HAVE_SETENV +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif # endif #endif #include @@ -4169,44 +3177,6 @@ #include #include -/* declarations of non-ANSI functions */ -#if defined(__MINGW32__) -# ifdef __STRICT_ANSI__ -int _putenv (const char *); -# endif -#elif defined(__CYGWIN__) -# ifdef __STRICT_ANSI__ -char *realpath (const char *, char *); -int putenv (char *); -int setenv (const char *, const char *, int); -# endif -/* #elif defined (other platforms) ... */ -#endif - -/* portability defines, excluding path handling macros */ -#if defined(_MSC_VER) -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -# define S_IXUSR _S_IEXEC -# ifndef _INTPTR_T_DEFINED -# define _INTPTR_T_DEFINED -# define intptr_t int -# endif -#elif defined(__MINGW32__) -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -#elif defined(__CYGWIN__) -# define HAVE_SETENV -# define FOPEN_WB "wb" -/* #elif defined (other platforms) ... */ -#endif - #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) @@ -4222,7 +3192,14 @@ # define S_IXGRP 0 #endif -/* path handling portability macros */ +#ifdef _MSC_VER +# define S_IXUSR _S_IEXEC +# define stat _stat +# ifndef _INTPTR_T_DEFINED +# define intptr_t int +# endif +#endif + #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' @@ -4253,6 +3230,10 @@ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ +#ifdef __CYGWIN__ +# define FOPEN_WB "wb" +#endif + #ifndef FOPEN_WB # define FOPEN_WB "w" #endif @@ -4265,13 +3246,22 @@ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) -#if defined(LT_DEBUGWRAPPER) -static int lt_debug = 1; +#undef LTWRAPPER_DEBUGPRINTF +#if defined DEBUGWRAPPER +# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args +static void +ltwrapper_debugprintf (const char *fmt, ...) +{ + va_list args; + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); +} #else -static int lt_debug = 0; +# define LTWRAPPER_DEBUGPRINTF(args) #endif -const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ +const char *program_name = NULL; void *xmalloc (size_t num); char *xstrdup (const char *string); @@ -4281,27 +3271,41 @@ int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); -void lt_debugprintf (const char *file, int line, const char *fmt, ...); -void lt_fatal (const char *file, int line, const char *message, ...); -static const char *nonnull (const char *s); -static const char *nonempty (const char *s); +void lt_fatal (const char *message, ...); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_opt_process_env_set (const char *arg); +void lt_opt_process_env_prepend (const char *arg); +void lt_opt_process_env_append (const char *arg); +int lt_split_name_value (const char *arg, char** name, char** value); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); -char **prepare_spawn (char **argv); -void lt_dump_script (FILE *f); + +static const char *script_text_part1 = +EOF + + func_emit_wrapper_part1 yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ "/' -e 's/$/\\n"/' + echo ";" + cat <"))); for (i = 0; i < newargc; i++) { - lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n", - i, nonnull (newargz[i])); + LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : ""))); } EOF @@ -4517,14 +3560,11 @@ mingw*) cat <<"EOF" /* execv doesn't actually work on mingw as expected on unix */ - newargz = prepare_spawn (newargz); rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); if (rval == -1) { /* failed to start process */ - lt_debugprintf (__FILE__, __LINE__, - "(main) failed to launch target \"%s\": %s\n", - lt_argv_zero, nonnull (strerror (errno))); + LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); return 127; } return rval; @@ -4546,7 +3586,7 @@ { void *p = (void *) malloc (num); if (!p) - lt_fatal (__FILE__, __LINE__, "memory exhausted"); + lt_fatal ("Memory exhausted"); return p; } @@ -4580,8 +3620,8 @@ { struct stat st; - lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n", - nonempty (path)); + LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); if ((!path) || (!*path)) return 0; @@ -4598,8 +3638,8 @@ int rval = 0; struct stat st; - lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", - nonempty (path)); + LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); if ((!path) || (!*path)) return 0; @@ -4625,8 +3665,8 @@ int tmp_len; char *concat_name; - lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", - nonempty (wrapper)); + LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", + wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; @@ -4679,8 +3719,7 @@ { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); + lt_fatal ("getcwd failed"); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); @@ -4705,8 +3744,7 @@ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); + lt_fatal ("getcwd failed"); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); @@ -4732,9 +3770,8 @@ int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { - lt_debugprintf (__FILE__, __LINE__, - "checking path component for symlinks: %s\n", - tmp_pathspec); + LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", + tmp_pathspec)); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) @@ -4756,9 +3793,8 @@ } else { - lt_fatal (__FILE__, __LINE__, - "error accessing file \"%s\": %s", - tmp_pathspec, nonnull (strerror (errno))); + char *errstr = strerror (errno); + lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); } } XFREE (tmp_pathspec); @@ -4771,8 +3807,7 @@ tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { - lt_fatal (__FILE__, __LINE__, - "could not follow symlinks for %s", pathspec); + lt_fatal ("Could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif @@ -4798,25 +3833,11 @@ return str; } -void -lt_debugprintf (const char *file, int line, const char *fmt, ...) -{ - va_list args; - if (lt_debug) - { - (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); - va_start (args, fmt); - (void) vfprintf (stderr, fmt, args); - va_end (args); - } -} - static void -lt_error_core (int exit_status, const char *file, - int line, const char *mode, +lt_error_core (int exit_status, const char *mode, const char *message, va_list ap) { - fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + fprintf (stderr, "%s: %s: ", program_name, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); @@ -4825,32 +3846,20 @@ } void -lt_fatal (const char *file, int line, const char *message, ...) +lt_fatal (const char *message, ...) { va_list ap; va_start (ap, message); - lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); va_end (ap); } -static const char * -nonnull (const char *s) -{ - return s ? s : "(null)"; -} - -static const char * -nonempty (const char *s) -{ - return (s && !*s) ? "(empty)" : nonnull (s); -} - void lt_setenv (const char *name, const char *value) { - lt_debugprintf (__FILE__, __LINE__, - "(lt_setenv) setting '%s' to '%s'\n", - nonnull (name), nonnull (value)); + LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", + (name ? name : ""), + (value ? value : ""))); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ @@ -4895,12 +3904,95 @@ return new_value; } +int +lt_split_name_value (const char *arg, char** name, char** value) +{ + const char *p; + int len; + if (!arg || !*arg) + return 1; + + p = strchr (arg, (int)'='); + + if (!p) + return 1; + + *value = xstrdup (++p); + + len = strlen (arg) - strlen (*value); + *name = XMALLOC (char, len); + strncpy (*name, arg, len-1); + (*name)[len - 1] = '\0'; + + return 0; +} + +void +lt_opt_process_env_set (const char *arg) +{ + char *name = NULL; + char *value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); + } + + lt_setenv (name, value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_prepend (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_append (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 1); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + void lt_update_exe_path (const char *name, const char *value) { - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); + LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + (name ? name : ""), + (value ? value : ""))); if (name && *name && value && *value) { @@ -4919,9 +4011,9 @@ void lt_update_lib_path (const char *name, const char *value) { - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); + LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + (name ? name : ""), + (value ? value : ""))); if (name && *name && value && *value) { @@ -4931,152 +4023,11 @@ } } -EOF - case $host_os in - mingw*) - cat <<"EOF" - -/* Prepares an argument vector before calling spawn(). - Note that spawn() does not by itself call the command interpreter - (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : - ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); - GetVersionEx(&v); - v.dwPlatformId == VER_PLATFORM_WIN32_NT; - }) ? "cmd.exe" : "command.com"). - Instead it simply concatenates the arguments, separated by ' ', and calls - CreateProcess(). We must quote the arguments since Win32 CreateProcess() - interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a - special way: - - Space and tab are interpreted as delimiters. They are not treated as - delimiters if they are surrounded by double quotes: "...". - - Unescaped double quotes are removed from the input. Their only effect is - that within double quotes, space and tab are treated like normal - characters. - - Backslashes not followed by double quotes are not special. - - But 2*n+1 backslashes followed by a double quote become - n backslashes followed by a double quote (n >= 0): - \" -> " - \\\" -> \" - \\\\\" -> \\" - */ -#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -char ** -prepare_spawn (char **argv) -{ - size_t argc; - char **new_argv; - size_t i; - - /* Count number of arguments. */ - for (argc = 0; argv[argc] != NULL; argc++) - ; - - /* Allocate new argument vector. */ - new_argv = XMALLOC (char *, argc + 1); - - /* Put quoted arguments into the new argument vector. */ - for (i = 0; i < argc; i++) - { - const char *string = argv[i]; - - if (string[0] == '\0') - new_argv[i] = xstrdup ("\"\""); - else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) - { - int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); - size_t length; - unsigned int backslashes; - const char *s; - char *quoted_string; - char *p; - - length = 0; - backslashes = 0; - if (quote_around) - length++; - for (s = string; *s != '\0'; s++) - { - char c = *s; - if (c == '"') - length += backslashes + 1; - length++; - if (c == '\\') - backslashes++; - else - backslashes = 0; - } - if (quote_around) - length += backslashes + 1; - - quoted_string = XMALLOC (char, length + 1); - - p = quoted_string; - backslashes = 0; - if (quote_around) - *p++ = '"'; - for (s = string; *s != '\0'; s++) - { - char c = *s; - if (c == '"') - { - unsigned int j; - for (j = backslashes + 1; j > 0; j--) - *p++ = '\\'; - } - *p++ = c; - if (c == '\\') - backslashes++; - else - backslashes = 0; - } - if (quote_around) - { - unsigned int j; - for (j = backslashes; j > 0; j--) - *p++ = '\\'; - *p++ = '"'; - } - *p = '\0'; - - new_argv[i] = quoted_string; - } - else - new_argv[i] = (char *) string; - } - new_argv[argc] = NULL; - - return new_argv; -} -EOF - ;; - esac - - cat <<"EOF" -void lt_dump_script (FILE* f) -{ -EOF - func_emit_wrapper yes | - $SED -e 's/\([\\"]\)/\\\1/g' \ - -e 's/^/ fputs ("/' -e 's/$/\\n", f);/' - cat <<"EOF" -} EOF } # end: func_emit_cwrapperexe_src -# func_win32_import_lib_p ARG -# True if ARG is an import lib, as indicated by $file_magic_cmd -func_win32_import_lib_p () -{ - $opt_debug - case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in - *import*) : ;; - *) false ;; - esac -} - # func_mode_link arg... func_mode_link () { @@ -5121,7 +4072,6 @@ new_inherited_linker_flags= avoid_version=no - bindir= dlfiles= dlprefiles= dlself=no @@ -5214,11 +4164,6 @@ esac case $prev in - bindir) - bindir="$arg" - prev= - continue - ;; dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. @@ -5250,9 +4195,9 @@ ;; *) if test "$prev" = dlfiles; then - func_append dlfiles " $arg" + dlfiles="$dlfiles $arg" else - func_append dlprefiles " $arg" + dlprefiles="$dlprefiles $arg" fi prev= continue @@ -5276,7 +4221,7 @@ *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; - *) func_append deplibs " $qarg.ltframework" # this is fixed later + *) deplibs="$deplibs $qarg.ltframework" # this is fixed later ;; esac ;; @@ -5295,7 +4240,7 @@ moreargs= for fil in `cat "$save_arg"` do -# func_append moreargs " $fil" +# moreargs="$moreargs $fil" arg=$fil # A libtool-controlled object. @@ -5324,7 +4269,7 @@ if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - func_append dlfiles " $pic_object" + dlfiles="$dlfiles $pic_object" prev= continue else @@ -5336,7 +4281,7 @@ # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. - func_append dlprefiles " $pic_object" + dlprefiles="$dlprefiles $pic_object" prev= fi @@ -5406,12 +4351,12 @@ if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; - *) func_append rpath " $arg" ;; + *) rpath="$rpath $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; - *) func_append xrpath " $arg" ;; + *) xrpath="$xrpath $arg" ;; esac fi prev= @@ -5423,28 +4368,28 @@ continue ;; weak) - func_append weak_libs " $arg" + weak_libs="$weak_libs $arg" prev= continue ;; xcclinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $qarg" + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) - func_append compiler_flags " $qarg" + compiler_flags="$compiler_flags $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $wl$qarg" + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" @@ -5480,11 +4425,6 @@ continue ;; - -bindir) - prev=bindir - continue - ;; - -dlopen) prev=dlfiles continue @@ -5535,16 +4475,15 @@ ;; -L*) - func_stripname "-L" '' "$arg" - if test -z "$func_stripname_result"; then + func_stripname '-L' '' "$arg" + dir=$func_stripname_result + if test -z "$dir"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; @@ -5556,30 +4495,24 @@ ;; esac case "$deplibs " in - *" -L$dir "* | *" $arg "*) - # Will only happen for absolute or sysroot arguments - ;; + *" -L$dir "*) ;; *) - # Preserve sysroot, but never include relative directories - case $dir in - [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; - *) func_append deplibs " -L$dir" ;; - esac - func_append lib_search_path " $dir" + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; - *) func_append dllsearchpath ":$dir";; + *) dllsearchpath="$dllsearchpath:$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; + *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac @@ -5589,7 +4522,7 @@ -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) # These systems don't actually have a C or math library (as such) continue ;; @@ -5603,7 +4536,7 @@ ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework - func_append deplibs " System.ltframework" + deplibs="$deplibs System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) @@ -5623,7 +4556,7 @@ ;; esac fi - func_append deplibs " $arg" + deplibs="$deplibs $arg" continue ;; @@ -5635,8 +4568,8 @@ # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. - -model|-arch|-isysroot|--sysroot) - func_append compiler_flags " $arg" + -model|-arch|-isysroot) + compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler @@ -5644,12 +4577,12 @@ ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) - func_append compiler_flags " $arg" + compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; - * ) func_append new_inherited_linker_flags " $arg" ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; esac continue ;; @@ -5716,17 +4649,13 @@ # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; - =*) - func_stripname '=' '' "$dir" - dir=$lt_sysroot$func_stripname_result - ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; - *) func_append xrpath " $dir" ;; + *) xrpath="$xrpath $dir" ;; esac continue ;; @@ -5779,8 +4708,8 @@ for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" - func_append arg " $func_quote_for_eval_result" - func_append compiler_flags " $func_quote_for_eval_result" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" @@ -5795,9 +4724,9 @@ for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" - func_append arg " $wl$func_quote_for_eval_result" - func_append compiler_flags " $wl$func_quote_for_eval_result" - func_append linker_flags " $func_quote_for_eval_result" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" + linker_flags="$linker_flags $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" @@ -5825,27 +4754,23 @@ arg="$func_quote_for_eval_result" ;; - # Flags to be passed through unchanged, with rationale: - # -64, -mips[0-9] enable 64-bit mode for the SGI compiler - # -r[0-9][0-9]* specify processor for the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler - # +DA*, +DD* enable 64-bit mode for the HP compiler - # -q* compiler args for the IBM compiler - # -m*, -t[45]*, -txscale* architecture-specific flags for GCC - # -F/path path to uninstalled frameworks, gcc on darwin - # -p, -pg, --coverage, -fprofile-* profiling flags for GCC - # @file GCC response files - # -tp=* Portland pgcc target processor selection - # --sysroot=* for sysroot support - # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -F/path gives path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC + # @file GCC response files -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ - -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" - func_append compiler_flags " $arg" + compiler_flags="$compiler_flags $arg" continue ;; @@ -5857,7 +4782,7 @@ *.$objext) # A standard object. - func_append objs " $arg" + objs="$objs $arg" ;; *.lo) @@ -5888,7 +4813,7 @@ if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - func_append dlfiles " $pic_object" + dlfiles="$dlfiles $pic_object" prev= continue else @@ -5900,7 +4825,7 @@ # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. - func_append dlprefiles " $pic_object" + dlprefiles="$dlprefiles $pic_object" prev= fi @@ -5945,25 +4870,24 @@ *.$libext) # An archive. - func_append deplibs " $arg" - func_append old_deplibs " $arg" + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" continue ;; *.la) # A libtool-controlled library. - func_resolve_sysroot "$arg" if test "$prev" = dlfiles; then # This library was specified with -dlopen. - func_append dlfiles " $func_resolve_sysroot_result" + dlfiles="$dlfiles $arg" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. - func_append dlprefiles " $func_resolve_sysroot_result" + dlprefiles="$dlprefiles $arg" prev= else - func_append deplibs " $func_resolve_sysroot_result" + deplibs="$deplibs $arg" fi continue ;; @@ -6001,7 +4925,7 @@ if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi @@ -6010,8 +4934,6 @@ func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" - func_to_tool_file "$output_objdir/" - tool_output_objdir=$func_to_tool_file_result # Create the object directory. func_mkdir_p "$output_objdir" @@ -6032,12 +4954,12 @@ # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - if $opt_preserve_dup_deps ; then + if $opt_duplicate_deps ; then case "$libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi - func_append libs " $deplib" + libs="$libs $deplib" done if test "$linkmode" = lib; then @@ -6050,9 +4972,9 @@ if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in - *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; esac - func_append pre_post_deps " $pre_post_dep" + pre_post_deps="$pre_post_deps $pre_post_dep" done fi pre_post_deps= @@ -6119,19 +5041,17 @@ for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= - func_resolve_sysroot "$lib" case $lib in - *.la) func_source "$func_resolve_sysroot_result" ;; + *.la) func_source "$lib" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do - func_basename "$deplib" - deplib_base=$func_basename_result + deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` case " $weak_libs " in *" $deplib_base "*) ;; - *) func_append deplibs " $deplib" ;; + *) deplibs="$deplibs $deplib" ;; esac done done @@ -6152,11 +5072,11 @@ compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else - func_append compiler_flags " $deplib" + compiler_flags="$compiler_flags $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; esac fi fi @@ -6241,7 +5161,7 @@ if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; esac fi fi @@ -6254,8 +5174,7 @@ test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" + newlib_search_path="$newlib_search_path $func_stripname_result" ;; prog) if test "$pass" = conv; then @@ -6269,8 +5188,7 @@ finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" + newlib_search_path="$newlib_search_path $func_stripname_result" ;; *) func_warning "\`-L' is ignored for archives/objects" @@ -6281,21 +5199,17 @@ -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result + dir=$func_stripname_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; - *) func_append xrpath " $dir" ;; + *) xrpath="$xrpath $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; - *.la) - func_resolve_sysroot "$deplib" - lib=$func_resolve_sysroot_result - ;; + *.la) lib="$deplib" ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" @@ -6313,7 +5227,7 @@ match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi @@ -6323,15 +5237,15 @@ ;; esac if test "$valid_a_lib" != yes; then - echo + $ECHO $ECHO "*** Warning: Trying to link with static lib archive $deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because the file extensions .$libext of this argument makes me believe" - echo "*** that it is just a static archive that I should not use here." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because the file extensions .$libext of this argument makes me believe" + $ECHO "*** that it is just a static archive that I should not use here." else - echo + $ECHO $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" @@ -6358,11 +5272,11 @@ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. - func_append newdlprefiles " $deplib" + newdlprefiles="$newdlprefiles $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else - func_append newdlfiles " $deplib" + newdlfiles="$newdlfiles $deplib" fi fi continue @@ -6404,20 +5318,20 @@ # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then - tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; - *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; esac done fi - dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && func_append dlfiles " $dlopen" - test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi if test "$pass" = conv; then @@ -6428,20 +5342,20 @@ func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. - func_append convenience " $ladir/$objdir/$old_library" - func_append old_convenience " $ladir/$objdir/$old_library" + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" - if $opt_preserve_dup_deps ; then + if $opt_duplicate_deps ; then case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi - func_append tmp_libs " $deplib" + tmp_libs="$tmp_libs $deplib" done continue fi # $pass = conv @@ -6449,15 +5363,9 @@ # Get the name of the library we link against. linklib= - if test -n "$old_library" && - { test "$prefer_static_libs" = yes || - test "$prefer_static_libs,$installed" = "built,no"; }; then - linklib=$old_library - else - for l in $old_library $library_names; do - linklib="$l" - done - fi + for l in $old_library $library_names; do + linklib="$l" + done if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi @@ -6474,9 +5382,9 @@ # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. - func_append dlprefiles " $lib $dependency_libs" + dlprefiles="$dlprefiles $lib $dependency_libs" else - func_append newdlfiles " $lib" + newdlfiles="$newdlfiles $lib" fi continue fi # $pass = dlopen @@ -6498,14 +5406,14 @@ # Find the relevant object directory and library name. if test "X$installed" = Xyes; then - if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else - dir="$lt_sysroot$libdir" - absdir="$lt_sysroot$libdir" + dir="$libdir" + absdir="$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else @@ -6513,12 +5421,12 @@ dir="$ladir" absdir="$abs_ladir" # Remove this search path later - func_append notinst_path " $abs_ladir" + notinst_path="$notinst_path $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later - func_append notinst_path " $abs_ladir" + notinst_path="$notinst_path $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" @@ -6529,46 +5437,20 @@ if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi - case "$host" in - # special handling for platforms with PE-DLLs. - *cygwin* | *mingw* | *cegcc* ) - # Linker will automatically link against shared library if both - # static and shared are present. Therefore, ensure we extract - # symbols from the import library if a shared library is present - # (otherwise, the dlopen module name will be incorrect). We do - # this by putting the import library name into $newdlprefiles. - # We recover the dlopen module name by 'saving' the la file - # name in a special purpose variable, and (later) extracting the - # dlname from the la file. - if test -n "$dlname"; then - func_tr_sh "$dir/$linklib" - eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" - func_append newdlprefiles " $dir/$linklib" - else - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - fi - ;; - * ) - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - func_append newdlprefiles " $dir/$dlname" - else - func_append newdlprefiles " $dir/$linklib" - fi - ;; - esac + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi fi # $pass = dlpreopen if test -z "$libdir"; then @@ -6586,7 +5468,7 @@ if test "$linkmode" = prog && test "$pass" != link; then - func_append newlib_search_path " $ladir" + newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" linkalldeplibs=no @@ -6599,8 +5481,7 @@ for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" + newlib_search_path="$newlib_search_path $func_stripname_result" ;; esac # Need to link against all dependency_libs? @@ -6611,12 +5492,12 @@ # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - if $opt_preserve_dup_deps ; then + if $opt_duplicate_deps ; then case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi - func_append tmp_libs " $deplib" + tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... @@ -6631,7 +5512,7 @@ # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; - *) func_append temp_rpath "$absdir:" ;; + *) temp_rpath="$temp_rpath$absdir:" ;; esac fi @@ -6643,7 +5524,7 @@ *) case "$compile_rpath " in *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; + *) compile_rpath="$compile_rpath $absdir" esac ;; esac @@ -6652,7 +5533,7 @@ *) case "$finalize_rpath " in *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; + *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac @@ -6677,12 +5558,12 @@ case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded - func_append notinst_deplibs " $lib" + notinst_deplibs="$notinst_deplibs $lib" need_relink=no ;; *) if test "$installed" = no; then - func_append notinst_deplibs " $lib" + notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi ;; @@ -6699,7 +5580,7 @@ fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then - echo + $ECHO if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else @@ -6717,7 +5598,7 @@ *) case "$compile_rpath " in *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; + *) compile_rpath="$compile_rpath $absdir" esac ;; esac @@ -6726,7 +5607,7 @@ *) case "$finalize_rpath " in *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; + *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac @@ -6780,7 +5661,7 @@ linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" - if test "$linkmode" = prog || test "$opt_mode" != relink; then + if test "$linkmode" = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= @@ -6802,9 +5683,9 @@ if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then - echo - echo "*** And there doesn't seem to be a static archive available" - echo "*** The link will probably fail, sorry" + $ECHO + $ECHO "*** And there doesn't seem to be a static archive available" + $ECHO "*** The link will probably fail, sorry" else add="$dir/$old_library" fi @@ -6836,7 +5717,7 @@ if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" + add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi @@ -6858,7 +5739,7 @@ if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; - *) func_append compile_shlibpath "$add_shlibpath:" ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then @@ -6872,13 +5753,13 @@ test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac fi fi fi - if test "$linkmode" = prog || test "$opt_mode" = relink; then + if test "$linkmode" = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= @@ -6892,7 +5773,7 @@ elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then @@ -6909,7 +5790,7 @@ if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" + add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi @@ -6944,21 +5825,21 @@ # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. - echo + $ECHO $ECHO "*** Warning: This system can not link to static lib archive $lib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then - echo "*** But as you try to build a module library, libtool will still create " - echo "*** a static module, that should work as long as the dlopening application" - echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + $ECHO "*** But as you try to build a module library, libtool will still create " + $ECHO "*** a static module, that should work as long as the dlopening application" + $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module @@ -6986,46 +5867,37 @@ temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; - *) func_append xrpath " $temp_xrpath";; + *) xrpath="$xrpath $temp_xrpath";; esac;; - *) func_append temp_deplibs " $libdir";; + *) temp_deplibs="$temp_deplibs $libdir";; esac done dependency_libs="$temp_deplibs" fi - func_append newlib_search_path " $absdir" + newlib_search_path="$newlib_search_path $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result";; - *) func_resolve_sysroot "$deplib" ;; - esac - if $opt_preserve_dup_deps ; then + if $opt_duplicate_deps ; then case "$tmp_libs " in - *" $func_resolve_sysroot_result "*) - func_append specialdeplibs " $func_resolve_sysroot_result" ;; + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi - func_append tmp_libs " $func_resolve_sysroot_result" + tmp_libs="$tmp_libs $deplib" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do - path= case $deplib in -L*) path="$deplib" ;; *.la) - func_resolve_sysroot "$deplib" - deplib=$func_resolve_sysroot_result func_dirname "$deplib" "" "." - dir=$func_dirname_result + dir="$func_dirname_result" # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; @@ -7052,8 +5924,8 @@ if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi - func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" - func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi @@ -7086,7 +5958,7 @@ compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else - compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" @@ -7103,7 +5975,7 @@ for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; - *) func_append lib_search_path " $dir" ;; + *) lib_search_path="$lib_search_path $dir" ;; esac done newlib_search_path= @@ -7161,10 +6033,10 @@ -L*) case " $tmp_libs " in *" $deplib "*) ;; - *) func_append tmp_libs " $deplib" ;; + *) tmp_libs="$tmp_libs $deplib" ;; esac ;; - *) func_append tmp_libs " $deplib" ;; + *) tmp_libs="$tmp_libs $deplib" ;; esac done eval $var=\"$tmp_libs\" @@ -7180,7 +6052,7 @@ ;; esac if test -n "$i" ; then - func_append tmp_libs " $i" + tmp_libs="$tmp_libs $i" fi done dependency_libs=$tmp_libs @@ -7221,7 +6093,7 @@ # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" - func_append objs "$old_deplibs" + objs="$objs$old_deplibs" ;; lib) @@ -7254,10 +6126,10 @@ if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else - echo + $ECHO $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" - func_append libobjs " $objs" + libobjs="$libobjs $objs" fi fi @@ -7322,7 +6194,7 @@ age="$number_minor" revision="$number_revision" ;; - freebsd-aout|freebsd-elf|qnx|sunos) + freebsd-aout|freebsd-elf|sunos) current="$number_major" revision="$number_minor" age="0" @@ -7455,7 +6327,7 @@ done # Make executables depend on our current version. - func_append verstring ":${current}.0" + verstring="$verstring:${current}.0" ;; qnx) @@ -7523,10 +6395,10 @@ fi func_generate_dlsyms "$libname" "$libname" "yes" - func_append libobjs " $symfileobj" + libobjs="$libobjs $symfileobj" test "X$libobjs" = "X " && libobjs= - if test "$opt_mode" != relink; then + if test "$mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= @@ -7542,7 +6414,7 @@ continue fi fi - func_append removelist " $p" + removelist="$removelist $p" ;; *) ;; esac @@ -7553,28 +6425,27 @@ # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - func_append oldlibs " $output_objdir/$libname.$libext" + oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do - # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` - # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` - # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` + # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` + # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do - func_replace_sysroot "$libdir" - func_append temp_xrpath " -R$func_replace_sysroot_result" + temp_xrpath="$temp_xrpath -R$libdir" case "$finalize_rpath " in *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then @@ -7588,7 +6459,7 @@ for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; - *) func_append dlfiles " $lib" ;; + *) dlfiles="$dlfiles $lib" ;; esac done @@ -7598,19 +6469,19 @@ for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; - *) func_append dlprefiles " $lib" ;; + *) dlprefiles="$dlprefiles $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework - func_append deplibs " System.ltframework" + deplibs="$deplibs System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. @@ -7627,7 +6498,7 @@ *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then - func_append deplibs " -lc" + deplibs="$deplibs -lc" fi ;; esac @@ -7676,7 +6547,7 @@ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" i="" ;; esac @@ -7687,21 +6558,21 @@ set dummy $deplib_matches; shift deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" else droppeddeps=yes - echo + $ECHO $ECHO "*** Warning: dynamic linker does not accept needed library $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which I believe you do not have" - echo "*** because a test_compile did reveal that the linker did not use it for" - echo "*** its dynamic dependency list that programs get resolved with at runtime." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which I believe you do not have" + $ECHO "*** because a test_compile did reveal that the linker did not use it for" + $ECHO "*** its dynamic dependency list that programs get resolved with at runtime." fi fi ;; *) - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" ;; esac done @@ -7719,7 +6590,7 @@ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" i="" ;; esac @@ -7730,29 +6601,29 @@ set dummy $deplib_matches; shift deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" else droppeddeps=yes - echo + $ECHO $ECHO "*** Warning: dynamic linker does not accept needed library $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because a test_compile did reveal that the linker did not use this one" - echo "*** as a dynamic dependency that programs can get resolved with at runtime." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because a test_compile did reveal that the linker did not use this one" + $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." fi fi else droppeddeps=yes - echo + $ECHO $ECHO "*** Warning! Library $i is needed by this library but I was not able to" - echo "*** make it link in! You will probably need to install it or some" - echo "*** library that it depends on before this library will be fully" - echo "*** functional. Installing it before continuing would be even better." + $ECHO "*** make it link in! You will probably need to install it or some" + $ECHO "*** library that it depends on before this library will be fully" + $ECHO "*** functional. Installing it before continuing would be even better." fi ;; *) - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" ;; esac done @@ -7769,27 +6640,15 @@ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` - if test -n "$file_magic_glob"; then - libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob` - else - libnameglob=$libname - fi - test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - if test "$want_nocaseglob" = yes; then - shopt -s nocaseglob - potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` - $nocaseglob - else - potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` - fi + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | @@ -7806,13 +6665,13 @@ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi @@ -7821,12 +6680,12 @@ fi if test -n "$a_deplib" ; then droppeddeps=yes - echo + $ECHO $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else @@ -7837,7 +6696,7 @@ ;; *) # Add a -L argument. - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" ;; esac done # Gone through all deplibs. @@ -7853,7 +6712,7 @@ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" a_deplib="" ;; esac @@ -7864,9 +6723,9 @@ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test - if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi @@ -7875,12 +6734,12 @@ fi if test -n "$a_deplib" ; then droppeddeps=yes - echo + $ECHO $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else @@ -7891,32 +6750,32 @@ ;; *) # Add a -L argument. - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" - tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ + -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` done fi - case $tmp_deplibs in - *[!\ \ ]*) - echo + if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | + $GREP . >/dev/null; then + $ECHO if test "X$deplibs_check_method" = "Xnone"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." + $ECHO "*** Warning: inter-library dependencies are not supported in this platform." else - echo "*** Warning: inter-library dependencies are not known to be supported." + $ECHO "*** Warning: inter-library dependencies are not known to be supported." fi - echo "*** All declared inter-library dependencies are being dropped." + $ECHO "*** All declared inter-library dependencies are being dropped." droppeddeps=yes - ;; - esac + fi ;; esac versuffix=$versuffix_save @@ -7928,23 +6787,23 @@ case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework - newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO + $ECHO "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." + $ECHO "*** a static module, that should work as long as the dlopening" + $ECHO "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" @@ -7954,16 +6813,16 @@ build_libtool_libs=no fi else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." + $ECHO "*** The inter-library dependencies that have been dropped here will be" + $ECHO "*** automatically added whenever a program is linked with this library" + $ECHO "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then - echo - echo "*** Since this library must not contain undefined symbols," - echo "*** because either the platform does not support them or" - echo "*** it was explicitly requested with -no-undefined," - echo "*** libtool will only create a static version of it." + $ECHO + $ECHO "*** Since this library must not contain undefined symbols," + $ECHO "*** because either the platform does not support them or" + $ECHO "*** it was explicitly requested with -no-undefined," + $ECHO "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module @@ -7980,9 +6839,9 @@ # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) - newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac @@ -7995,7 +6854,7 @@ *) case " $deplibs " in *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; + new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac @@ -8005,10 +6864,10 @@ -L*) case " $new_libs " in *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; + *) new_libs="$new_libs $deplib" ;; esac ;; - *) func_append new_libs " $deplib" ;; + *) new_libs="$new_libs $deplib" ;; esac done deplibs="$new_libs" @@ -8025,12 +6884,10 @@ hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" - test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then - func_replace_sysroot "$libdir" - libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else @@ -8039,18 +6896,18 @@ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - func_append dep_rpath " $flag" + dep_rpath="$dep_rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; + *) perm_rpath="$perm_rpath $libdir" ;; esac fi done @@ -8068,7 +6925,7 @@ # We should set the runpath_var. rpath= for dir in $perm_rpath; do - func_append rpath "$dir:" + rpath="$rpath$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi @@ -8076,7 +6933,7 @@ fi shlibpath="$finalize_shlibpath" - test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi @@ -8102,18 +6959,18 @@ linknames= for link do - func_append linknames " $link" + linknames="$linknames $link" done # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" - func_append delfiles " $export_symbols" + delfiles="$delfiles $export_symbols" fi orig_export_symbols= @@ -8144,45 +7001,13 @@ $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' - for cmd1 in $cmds; do + for cmd in $cmds; do IFS="$save_ifs" - # Take the normal branch if the nm_file_list_spec branch - # doesn't work or if tool conversion is not needed. - case $nm_file_list_spec~$to_tool_file_cmd in - *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) - try_normal_branch=yes - eval cmd=\"$cmd1\" - func_len " $cmd" - len=$func_len_result - ;; - *) - try_normal_branch=no - ;; - esac - if test "$try_normal_branch" = yes \ - && { test "$len" -lt "$max_cmd_len" \ - || test "$max_cmd_len" -le -1; } - then - func_show_eval "$cmd" 'exit $?' - skipped_export=false - elif test -n "$nm_file_list_spec"; then - func_basename "$output" - output_la=$func_basename_result - save_libobjs=$libobjs - save_output=$output - output=${output_objdir}/${output_la}.nm - func_to_tool_file "$output" - libobjs=$nm_file_list_spec$func_to_tool_file_result - func_append delfiles " $output" - func_verbose "creating $NM input file list: $output" - for obj in $save_libobjs; do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > "$output" - eval cmd=\"$cmd1\" + eval cmd=\"$cmd\" + func_len " $cmd" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then func_show_eval "$cmd" 'exit $?' - output=$save_output - libobjs=$save_libobjs skipped_export=false else # The command line is too long to execute in one step. @@ -8204,7 +7029,7 @@ if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then @@ -8216,7 +7041,7 @@ # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi @@ -8226,7 +7051,7 @@ case " $convenience " in *" $test_deplib "*) ;; *) - func_append tmp_deplibs " $test_deplib" + tmp_deplibs="$tmp_deplibs $test_deplib" ;; esac done @@ -8246,21 +7071,21 @@ test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $convenience - func_append libobjs " $func_extract_archives_result" + libobjs="$libobjs $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" - func_append linker_flags " $flag" + linker_flags="$linker_flags $flag" fi # Make a backup of the uninstalled library when relinking - if test "$opt_mode" = relink; then + if test "$mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi @@ -8305,8 +7130,7 @@ save_libobjs=$libobjs fi save_output=$output - func_basename "$output" - output_la=$func_basename_result + output_la=`$ECHO "X$output" | $Xsed -e "$basename"` # Clear the reloadable object creation command queue and # initialize k to one. @@ -8319,16 +7143,13 @@ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" - echo 'INPUT (' > $output + $ECHO 'INPUT (' > $output for obj in $save_libobjs do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output + $ECHO "$obj" >> $output done - echo ')' >> $output - func_append delfiles " $output" - func_to_tool_file "$output" - output=$func_to_tool_file_result + $ECHO ')' >> $output + delfiles="$delfiles $output" elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" @@ -8342,12 +7163,10 @@ fi for obj do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output + $ECHO "$obj" >> $output done - func_append delfiles " $output" - func_to_tool_file "$output" - output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + delfiles="$delfiles $output" + output=$firstobj\"$file_list_spec$output\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." @@ -8371,19 +7190,17 @@ # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. - reload_objs=$objlist - eval concat_cmds=\"$reload_cmds\" + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" else # All subsequent reloadable object files will link in # the last one created. - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext - objlist=" $obj" + objlist=$obj func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result @@ -8393,12 +7210,11 @@ # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi - func_append delfiles " $output" + delfiles="$delfiles $output" else output= @@ -8432,7 +7248,7 @@ lt_exit=$? # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test "$mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -8453,7 +7269,7 @@ if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then @@ -8465,7 +7281,7 @@ # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi @@ -8506,10 +7322,10 @@ # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $dlprefiles - func_append libobjs " $func_extract_archives_result" + libobjs="$libobjs $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi @@ -8525,7 +7341,7 @@ lt_exit=$? # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test "$mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -8537,7 +7353,7 @@ IFS="$save_ifs" # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test "$mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then @@ -8618,21 +7434,18 @@ if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` else gentop="$output_objdir/${obj}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi - # If we're not building shared, we need to use non_pic_objs - test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" - # Create the old-style object. - reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' @@ -8692,8 +7505,8 @@ case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac @@ -8704,14 +7517,14 @@ if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) - func_append compile_command " ${wl}-bind_at_load" - func_append finalize_command " ${wl}-bind_at_load" + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac @@ -8725,7 +7538,7 @@ *) case " $compile_deplibs " in *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; + new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac @@ -8735,17 +7548,17 @@ -L*) case " $new_libs " in *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; + *) new_libs="$new_libs $deplib" ;; esac ;; - *) func_append new_libs " $deplib" ;; + *) new_libs="$new_libs $deplib" ;; esac done compile_deplibs="$new_libs" - func_append compile_command " $compile_deplibs" - func_append finalize_command " $finalize_deplibs" + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. @@ -8753,7 +7566,7 @@ # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; esac done fi @@ -8772,18 +7585,18 @@ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" + rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; + *) perm_rpath="$perm_rpath $libdir" ;; esac fi case $host in @@ -8792,12 +7605,12 @@ case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; - *) func_append dllsearchpath ":$libdir";; + *) dllsearchpath="$dllsearchpath:$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; + *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac @@ -8823,18 +7636,18 @@ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" + rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; - *) func_append finalize_perm_rpath " $libdir" ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; esac fi done @@ -8848,8 +7661,8 @@ if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. - compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` - finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" @@ -8861,15 +7674,15 @@ wrappers_required=yes case $host in - *cegcc* | *mingw32ce*) - # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. - wrappers_required=no - ;; *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; + *cegcc) + # Disable wrappers for cegcc, we are cross compiling anyway. + wrappers_required=no + ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no @@ -8878,19 +7691,13 @@ esac if test "$wrappers_required" = no; then # Replace the output file specification. - compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' @@ -8913,7 +7720,7 @@ # We should set the runpath_var. rpath= for dir in $perm_rpath; do - func_append rpath "$dir:" + rpath="$rpath$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi @@ -8921,7 +7728,7 @@ # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do - func_append rpath "$dir:" + rpath="$rpath$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi @@ -8931,18 +7738,11 @@ # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - exit $EXIT_SUCCESS fi @@ -8957,7 +7757,7 @@ if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then - relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= @@ -8969,19 +7769,13 @@ fi # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' - if test -n "$postlink_cmds"; then - func_to_tool_file "$output_objdir/$outputname" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - # Now create the wrapper script. func_verbose "creating $output" @@ -8999,7 +7793,18 @@ fi done relink_command="(cd `pwd`; $relink_command)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $ECHO for shipping. + if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then + case $progpath in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; + *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + esac + qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. @@ -9079,7 +7884,7 @@ else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then - func_append oldobjs " $symfileobj" + oldobjs="$oldobjs $symfileobj" fi fi addlibs="$old_convenience" @@ -9087,10 +7892,10 @@ if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $addlibs - func_append oldobjs " $func_extract_archives_result" + oldobjs="$oldobjs $func_extract_archives_result" fi # Do each command in the archive commands. @@ -9101,10 +7906,10 @@ # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $dlprefiles - func_append oldobjs " $func_extract_archives_result" + oldobjs="$oldobjs $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have @@ -9120,9 +7925,9 @@ done | sort | sort -uc >/dev/null 2>&1); then : else - echo "copying selected object files to avoid basename conflicts..." + $ECHO "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= @@ -9146,9 +7951,9 @@ esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - func_append oldobjs " $gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" ;; - *) func_append oldobjs " $obj" ;; + *) oldobjs="$oldobjs $obj" ;; esac done fi @@ -9158,16 +7963,6 @@ len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds - elif test -n "$archiver_list_spec"; then - func_verbose "using command file archive linking..." - for obj in $oldobjs - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > $output_objdir/$libname.libcmd - func_to_tool_file "$output_objdir/$libname.libcmd" - oldobjs=" $archiver_list_spec$func_to_tool_file_result" - cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." @@ -9241,7 +8036,7 @@ done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi @@ -9264,19 +8059,9 @@ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" - func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" - ;; - -L*) - func_stripname -L '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -L$func_replace_sysroot_result" + newdependency_libs="$newdependency_libs $libdir/$name" ;; - -R*) - func_stripname -R '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -R$func_replace_sysroot_result" - ;; - *) func_append newdependency_libs " $deplib" ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; esac done dependency_libs="$newdependency_libs" @@ -9290,9 +8075,9 @@ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" - func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + newdlfiles="$newdlfiles $libdir/$name" ;; - *) func_append newdlfiles " $lib" ;; + *) newdlfiles="$newdlfiles $lib" ;; esac done dlfiles="$newdlfiles" @@ -9309,7 +8094,7 @@ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" - func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + newdlprefiles="$newdlprefiles $libdir/$name" ;; esac done @@ -9321,7 +8106,7 @@ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac - func_append newdlfiles " $abs" + newdlfiles="$newdlfiles $abs" done dlfiles="$newdlfiles" newdlprefiles= @@ -9330,33 +8115,15 @@ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac - func_append newdlprefiles " $abs" + newdlprefiles="$newdlprefiles $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin - # In fact, it would be nice if we could use this code for all target - # systems that can't hard-code library paths into their executables - # and that have no shared library path variable independent of PATH, - # but it turns out we can't easily determine that from inspecting - # libtool variables, so we have to hard-code the OSs to which it - # applies here; at the moment, that means platforms that use the PE - # object format with DLL files. See the long comment at the top of - # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) - # If a -bindir argument was supplied, place the dll there. - if test "x$bindir" != x ; - then - func_relative_path "$install_libdir" "$bindir" - tdlname=$func_relative_path_result$dlname - else - # Otherwise fall back on heuristic. - tdlname=../bin/$dlname - fi - ;; + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $ECHO > $output "\ # $outputname - a libtool library file @@ -9415,7 +8182,7 @@ exit $EXIT_SUCCESS } -{ test "$opt_mode" = link || test "$opt_mode" = relink; } && +{ test "$mode" = link || test "$mode" = relink; } && func_mode_link ${1+"$@"} @@ -9435,9 +8202,9 @@ for arg do case $arg in - -f) func_append RM " $arg"; rmforce=yes ;; - -*) func_append RM " $arg" ;; - *) func_append files " $arg" ;; + -f) RM="$RM $arg"; rmforce=yes ;; + -*) RM="$RM $arg" ;; + *) files="$files $arg" ;; esac done @@ -9446,23 +8213,24 @@ rmdirs= + origobjdir="$objdir" for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then - odir="$objdir" + objdir="$origobjdir" else - odir="$dir/$objdir" + objdir="$dir/$origobjdir" fi func_basename "$file" name="$func_basename_result" - test "$opt_mode" = uninstall && odir="$dir" + test "$mode" = uninstall && objdir="$dir" - # Remember odir for removal later, being careful to avoid duplicates - if test "$opt_mode" = clean; then + # Remember objdir for removal later, being careful to avoid duplicates + if test "$mode" = clean; then case " $rmdirs " in - *" $odir "*) ;; - *) func_append rmdirs " $odir" ;; + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; esac fi @@ -9488,17 +8256,18 @@ # Delete the libtool libraries and symlinks. for n in $library_names; do - func_append rmfiles " $odir/$n" + rmfiles="$rmfiles $objdir/$n" done - test -n "$old_library" && func_append rmfiles " $odir/$old_library" + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - case "$opt_mode" in + case "$mode" in clean) - case " $library_names " in + case " $library_names " in + # " " in the beginning catches empty $dlname *" $dlname "*) ;; - *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; esac - test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ;; uninstall) if test -n "$library_names"; then @@ -9526,19 +8295,19 @@ # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then - func_append rmfiles " $dir/$pic_object" + rmfiles="$rmfiles $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then - func_append rmfiles " $dir/$non_pic_object" + rmfiles="$rmfiles $dir/$non_pic_object" fi fi ;; *) - if test "$opt_mode" = clean ; then + if test "$mode" = clean ; then noexename=$name case $file in *.exe) @@ -9548,7 +8317,7 @@ noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe - func_append rmfiles " $file" + rmfiles="$rmfiles $file" ;; esac # Do a test to see if this is a libtool program. @@ -9557,7 +8326,7 @@ func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result - func_append rmfiles " $func_ltwrapper_scriptname_result" + rmfiles="$rmfiles $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename @@ -9565,12 +8334,12 @@ # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles - func_append rmfiles " $odir/$name $odir/${name}S.${objext}" + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then - func_append rmfiles " $odir/lt-$name" + rmfiles="$rmfiles $objdir/lt-$name" fi if test "X$noexename" != "X$name" ; then - func_append rmfiles " $odir/lt-${noexename}.c" + rmfiles="$rmfiles $objdir/lt-${noexename}.c" fi fi fi @@ -9578,6 +8347,7 @@ esac func_show_eval "$RM $rmfiles" 'exit_status=1' done + objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do @@ -9589,16 +8359,16 @@ exit $exit_status } -{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && +{ test "$mode" = uninstall || test "$mode" = clean; } && func_mode_uninstall ${1+"$@"} -test -z "$opt_mode" && { +test -z "$mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode \`$opt_mode'" + func_fatal_help "invalid operation mode \`$mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" diff -Nru fastjet-3.0.3+dfsg/m4/CGAL.m4 fastjet-3.0.6+dfsg/m4/CGAL.m4 --- fastjet-3.0.3+dfsg/m4/CGAL.m4 2012-06-13 14:14:56.000000000 +0000 +++ fastjet-3.0.6+dfsg/m4/CGAL.m4 2013-04-06 07:19:35.000000000 +0000 @@ -182,9 +182,9 @@ AC_LANG_POP(C++) if test "$cgal_have_lib" == yes; then CGAL_LIBS=${CGAL_LIBS}" -lCGAL" - dnl AC_CHECK_LIB(mpfr, main, [CGAL_LIBS="$CGAL_LIBS -lmpfr"]) - dnl AC_CHECK_LIB(gmp, main, [CGAL_LIBS="$CGAL_LIBS -lgmp"]) - dnl AC_CHECK_LIB(gmpxx, main, [CGAL_LIBS="$CGAL_LIBS -lgmpxx"]) + AC_CHECK_LIB(mpfr, main, [CGAL_LIBS="$CGAL_LIBS -lmpfr"]) + AC_CHECK_LIB(gmp, main, [CGAL_LIBS="$CGAL_LIBS -lgmp"]) + AC_CHECK_LIB(gmpxx, main, [CGAL_LIBS="$CGAL_LIBS -lgmpxx"]) dnl AC_CHECK_LIB(CGALcore++, main, [CGAL_LIBS="$CGAL_LIBS -lCGALcore++"]) dnl we can finally claim we've found CGAL! diff -Nru fastjet-3.0.3+dfsg/m4/libtool.m4 fastjet-3.0.6+dfsg/m4/libtool.m4 --- fastjet-3.0.3+dfsg/m4/libtool.m4 2012-06-25 13:55:01.000000000 +0000 +++ fastjet-3.0.6+dfsg/m4/libtool.m4 2013-04-06 16:44:21.000000000 +0000 @@ -1,8 +1,7 @@ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. +# 2006, 2007, 2008 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives @@ -11,8 +10,7 @@ m4_define([_LT_COPYING], [dnl # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. +# 2006, 2007, 2008 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. @@ -39,7 +37,7 @@ # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ]) -# serial 57 LT_INIT +# serial 56 LT_INIT # LT_PREREQ(VERSION) @@ -68,7 +66,6 @@ # ------------------ AC_DEFUN([LT_INIT], [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT -AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl AC_BEFORE([$0], [LTDL_INIT])dnl @@ -85,8 +82,6 @@ AC_REQUIRE([LTOBSOLETE_VERSION])dnl m4_require([_LT_PROG_LTMAIN])dnl -_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) - dnl Parse OPTIONS _LT_SET_OPTIONS([$0], [$1]) @@ -123,7 +118,7 @@ *) break;; esac done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ]) @@ -143,9 +138,6 @@ m4_defun([_LT_SETUP], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl - _LT_DECL([], [host_alias], [0], [The host system])dnl _LT_DECL([], [host], [0])dnl _LT_DECL([], [host_os], [0])dnl @@ -168,13 +160,10 @@ dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl -m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl m4_require([_LT_CMD_RELOAD])dnl m4_require([_LT_CHECK_MAGIC_METHOD])dnl -m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_WITH_SYSROOT])dnl _LT_CONFIG_LIBTOOL_INIT([ # See if we are running on zsh, and set the options which allow our @@ -190,6 +179,7 @@ _LT_CHECK_OBJDIR m4_require([_LT_TAG_COMPILER])dnl +_LT_PROG_ECHO_BACKSLASH case $host_os in aix3*) @@ -203,6 +193,23 @@ ;; esac +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + # Global variables: ofile=libtool can_build_shared=yes @@ -243,28 +250,6 @@ ])# _LT_SETUP -# _LT_PREPARE_SED_QUOTE_VARS -# -------------------------- -# Define a few sed substitution that help us do robust quoting. -m4_defun([_LT_PREPARE_SED_QUOTE_VARS], -[# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([["`\\]]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' -]) - # _LT_PROG_LTMAIN # --------------- # Note that this code is called both from `configure', and `config.status' @@ -423,7 +408,7 @@ # declaration there will have the same value as in `configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], -[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) +[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) # _LT_CONFIG_STATUS_DECLARATIONS @@ -433,7 +418,7 @@ # embedded single quotes properly. In configure, this macro expands # each variable declared with _LT_DECL (and _LT_TAGDECL) into: # -# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' +# ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) @@ -532,20 +517,12 @@ LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$[]1 -_LTECHO_EOF' -} - # Quote evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_quote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -556,9 +533,9 @@ # Double-quote double-evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_dquote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -566,38 +543,16 @@ esac done +# Fix-up fallback echo if it was mangled by the above quoting rules. +case \$lt_ECHO in +*'\\\[$]0 --fallback-echo"')dnl " + lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` + ;; +esac + _LT_OUTPUT_LIBTOOL_INIT ]) -# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) -# ------------------------------------ -# Generate a child script FILE with all initialization necessary to -# reuse the environment learned by the parent script, and make the -# file executable. If COMMENT is supplied, it is inserted after the -# `#!' sequence but before initialization text begins. After this -# macro, additional text can be appended to FILE to form the body of -# the child script. The macro ends with non-zero status if the -# file could not be fully written (such as if the disk is full). -m4_ifdef([AS_INIT_GENERATED], -[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], -[m4_defun([_LT_GENERATED_FILE_INIT], -[m4_require([AS_PREPARE])]dnl -[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl -[lt_write_fail=0 -cat >$1 <<_ASEOF || lt_write_fail=1 -#! $SHELL -# Generated by $as_me. -$2 -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$1 <<\_ASEOF || lt_write_fail=1 -AS_SHELL_SANITIZE -_AS_PREPARE -exec AS_MESSAGE_FD>&1 -_ASEOF -test $lt_write_fail = 0 && chmod +x $1[]dnl -m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT # LT_OUTPUT # --------- @@ -607,11 +562,20 @@ AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} AC_MSG_NOTICE([creating $CONFIG_LT]) -_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], -[# Run this file to recreate a libtool stub with the current configuration.]) +cat >"$CONFIG_LT" <<_LTEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate a libtool stub with the current configuration. -cat >>"$CONFIG_LT" <<\_LTEOF lt_cl_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AS_SHELL_SANITIZE +_AS_PREPARE + +exec AS_MESSAGE_FD>&1 exec AS_MESSAGE_LOG_FD>>config.log { echo @@ -637,7 +601,7 @@ m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) configured by $[0], generated by m4_PACKAGE_STRING. -Copyright (C) 2010 Free Software Foundation, Inc. +Copyright (C) 2008 Free Software Foundation, Inc. This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." @@ -682,13 +646,15 @@ # appending to config.log, which fails on DOS, as config.log is still kept # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. -lt_cl_success=: -test "$silent" = yes && - lt_config_lt_args="$lt_config_lt_args --quiet" -exec AS_MESSAGE_LOG_FD>/dev/null -$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false -exec AS_MESSAGE_LOG_FD>>config.log -$lt_cl_success || AS_EXIT(1) +if test "$no_create" != yes; then + lt_cl_success=: + test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" + exec AS_MESSAGE_LOG_FD>/dev/null + $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false + exec AS_MESSAGE_LOG_FD>>config.log + $lt_cl_success || AS_EXIT(1) +fi ])# LT_OUTPUT @@ -751,12 +717,15 @@ # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) - _LT_PROG_REPLACE_SHELLFNS + _LT_PROG_XSI_SHELLFNS - mv -f "$cfgfile" "$ofile" || + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ], @@ -862,13 +831,11 @@ AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_CXX], []) dnl AC_DEFUN([AC_LIBTOOL_F77], []) dnl AC_DEFUN([AC_LIBTOOL_FC], []) dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) -dnl AC_DEFUN([AC_LIBTOOL_RC], []) # _LT_TAG_COMPILER @@ -973,31 +940,6 @@ [lt_cv_ld_exported_symbols_list=no]) LDFLAGS="$save_LDFLAGS" ]) - AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], - [lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD - echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD - $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD - echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD - $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - ]) case $host_os in rhapsody* | darwin1.[[012]]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; @@ -1025,7 +967,7 @@ else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + if test "$DSYMUTIL" != ":"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= @@ -1045,11 +987,7 @@ _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='' - fi + _LT_TAGVAR(whole_archive_flag_spec, $1)='' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" case $cc_basename in @@ -1057,7 +995,7 @@ *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all + output_verbose_link_cmd=echo _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" @@ -1073,141 +1011,202 @@ fi ]) -# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) -# ---------------------------------- +# _LT_SYS_MODULE_PATH_AIX +# ----------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. -# Store the results from the different compilers for each TAGNAME. -# Allow to override them for all tags through lt_cv_aix_libpath. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl -if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], - [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ - lt_aix_libpath_sed='[ - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }]' - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi],[]) - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" - fi - ]) - aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) -fi +AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ])# _LT_SYS_MODULE_PATH_AIX # _LT_SHELL_INIT(ARG) # ------------------- m4_define([_LT_SHELL_INIT], -[m4_divert_text([M4SH-INIT], [$1 -])])# _LT_SHELL_INIT - +[ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +$1 +AC_DIVERT_POP +])# _LT_SHELL_INIT # _LT_PROG_ECHO_BACKSLASH # ----------------------- -# Find how we can fake an echo command that does not interpret backslash. -# In particular, with Autoconf 2.60 or later we add some code to the start -# of the generated configure script which will find a shell with a builtin -# printf (which we can use as an echo command). +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. m4_defun([_LT_PROG_ECHO_BACKSLASH], -[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -AC_MSG_CHECKING([how to print strings]) -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' +[_LT_SHELL_INIT([ +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$lt_ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +ECHO=${lt_ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then + # Yippee, $ECHO works! + : else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$[]1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} fi -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<_LT_EOF +[$]* +_LT_EOF + exit 0 +fi -case "$ECHO" in - printf*) AC_MSG_RESULT([printf]) ;; - print*) AC_MSG_RESULT([print -r]) ;; - *) AC_MSG_RESULT([cat]) ;; -esac +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -m4_ifdef([_AS_DETECT_SUGGESTED], -[_AS_DETECT_SUGGESTED([ - test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test "X`printf %s $ECHO`" = "X$ECHO" \ - || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) +if test -z "$lt_ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if { echo_test_string=`eval $cmd`; } 2>/dev/null && + { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null + then + break + fi + done + fi -_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) -_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) -])# _LT_PROG_ECHO_BACKSLASH + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : + else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + if test "X$ECHO" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + ECHO='print -r' + elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + ECHO='printf %s\n' + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + ECHO="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: -# _LT_WITH_SYSROOT -# ---------------- -AC_DEFUN([_LT_WITH_SYSROOT], -[AC_MSG_CHECKING([for sysroot]) -AC_ARG_WITH([sysroot], -[ --with-sysroot[=DIR] Search for dependent libraries within DIR - (or the compiler's sysroot if not specified).], -[], [with_sysroot=no]) - -dnl lt_sysroot will always be passed unquoted. We quote it here -dnl in case the user passed a directory name. -lt_sysroot= -case ${with_sysroot} in #( - yes) - if test "$GCC" = yes; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - AC_MSG_RESULT([${with_sysroot}]) - AC_MSG_ERROR([The sysroot must be an absolute path.]) - ;; -esac + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + ECHO=echo + fi + fi + fi + fi + fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +lt_ECHO=$ECHO +if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(lt_ECHO) +]) +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], + [An echo program that does not interpret backslashes]) +])# _LT_PROG_ECHO_BACKSLASH - AC_MSG_RESULT([${lt_sysroot:-no}]) -_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl -[dependent libraries, and in which our libraries should be installed.])]) # _LT_ENABLE_LOCK # --------------- @@ -1237,7 +1236,7 @@ ;; *-*-irix6*) # Find out which ABI we are using. - echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in @@ -1355,47 +1354,14 @@ ])# _LT_ENABLE_LOCK -# _LT_PROG_AR -# ----------- -m4_defun([_LT_PROG_AR], -[AC_CHECK_TOOLS(AR, [ar], false) -: ${AR=ar} -: ${AR_FLAGS=cru} -_LT_DECL([], [AR], [1], [The archiver]) -_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) - -AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], - [lt_cv_ar_at_file=no - AC_COMPILE_IFELSE([AC_LANG_PROGRAM], - [echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' - AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -eq 0; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -ne 0; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - ]) - ]) - -if test "x$lt_cv_ar_at_file" = xno; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi -_LT_DECL([], [archiver_list_spec], [1], - [How to feed a file listing to the archiver]) -])# _LT_PROG_AR - - # _LT_CMD_OLD_ARCHIVE # ------------------- m4_defun([_LT_CMD_OLD_ARCHIVE], -[_LT_PROG_AR +[AC_CHECK_TOOL(AR, ar, false) +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1]) AC_CHECK_TOOL(STRIP, strip, :) test -z "$STRIP" && STRIP=: @@ -1422,19 +1388,10 @@ esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac _LT_DECL([], [old_postinstall_cmds], [2]) _LT_DECL([], [old_postuninstall_cmds], [2]) _LT_TAGDECL([], [old_archive_cmds], [2], [Commands used to build an old-style archive]) -_LT_DECL([], [lock_old_archive_extraction], [0], - [Whether to use a lock for old archive extraction]) ])# _LT_CMD_OLD_ARCHIVE @@ -1459,15 +1416,15 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes @@ -1507,7 +1464,7 @@ if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes @@ -1570,11 +1527,6 @@ lt_cv_sys_max_cmd_len=8192; ;; - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. @@ -1639,8 +1591,8 @@ # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && + while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ + = "XX$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` @@ -1691,7 +1643,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -[#line $LINENO "configure" +[#line __oline__ "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -1732,13 +1684,7 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } +void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); @@ -1747,11 +1693,7 @@ if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else @@ -1927,16 +1869,16 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes @@ -2095,7 +2037,6 @@ m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ @@ -2104,23 +2045,16 @@ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= @@ -2133,7 +2067,7 @@ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' + lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; @@ -2153,13 +2087,7 @@ if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` + sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) @@ -2247,7 +2175,7 @@ m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; @@ -2278,9 +2206,8 @@ need_version=no need_lib_prefix=no - case $GCC,$cc_basename in - yes,*) - # gcc + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ @@ -2301,83 +2228,36 @@ cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH. + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' ;; *) - # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' ;; esac + dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; @@ -2464,19 +2344,6 @@ hardcode_into_libs=yes ;; -haiku*) - version_type=linux - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. @@ -2519,10 +2386,8 @@ soname_spec='${libname}${release}${shared_ext}$major' ;; esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 ;; interix[[3-9]]*) @@ -2580,7 +2445,7 @@ ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -2589,21 +2454,16 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], - [lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ - LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], - [lt_cv_shlibpath_overrides_runpath=yes])]) - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - ]) - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install @@ -2615,9 +2475,8 @@ # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -2849,8 +2708,6 @@ The last name is the one that the linker finds with -lNAME]]) _LT_DECL([], [soname_spec], [1], [[The coded name of the library, if different from the real name]]) -_LT_DECL([], [install_override_mode], [1], - [Permission mode override for installation of shared libraries]) _LT_DECL([], [postinstall_cmds], [2], [Command to use after installation of a shared archive]) _LT_DECL([], [postuninstall_cmds], [2], @@ -2963,7 +2820,6 @@ AC_REQUIRE([AC_CANONICAL_BUILD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PROG_ECHO_BACKSLASH])dnl AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], @@ -3085,11 +2941,6 @@ esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - if test "$GCC" != yes; then - reload_cmds=false - fi - ;; darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' @@ -3098,8 +2949,8 @@ fi ;; esac -_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl -_LT_TAGDECL([], [reload_cmds], [2])dnl +_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl +_LT_DECL([], [reload_cmds], [2])dnl ])# _LT_CMD_RELOAD @@ -3151,18 +3002,16 @@ # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; -cegcc*) +cegcc) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' @@ -3192,10 +3041,6 @@ lt_cv_deplibs_check_method=pass_all ;; -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in @@ -3204,11 +3049,11 @@ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac @@ -3230,7 +3075,7 @@ ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu) lt_cv_deplibs_check_method=pass_all ;; @@ -3308,21 +3153,6 @@ ;; esac ]) - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` - fi - ;; - esac -fi - file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown @@ -3330,11 +3160,7 @@ _LT_DECL([], [deplibs_check_method], [1], [Method to check whether dependent libraries are shared objects]) _LT_DECL([], [file_magic_cmd], [1], - [Command to use when deplibs_check_method = "file_magic"]) -_LT_DECL([], [file_magic_glob], [1], - [How to find potential files when deplibs_check_method = "file_magic"]) -_LT_DECL([], [want_nocaseglob], [1], - [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) + [Command to use when deplibs_check_method == "file_magic"]) ])# _LT_CHECK_MAGIC_METHOD @@ -3391,19 +3217,7 @@ NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols" - ;; - *) - DUMPBIN=: - ;; - esac - fi + AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) AC_SUBST([DUMPBIN]) if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" @@ -3416,13 +3230,13 @@ AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], [lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) cat conftest.out >&AS_MESSAGE_LOG_FD if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" @@ -3437,67 +3251,6 @@ dnl AC_DEFUN([AM_PROG_NM], []) dnl AC_DEFUN([AC_PROG_NM], []) -# _LT_CHECK_SHAREDLIB_FROM_LINKLIB -# -------------------------------- -# how to determine the name of the shared library -# associated with a specific link library. -# -- PORTME fill in with the dynamic library characteristics -m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], -[m4_require([_LT_DECL_EGREP]) -m4_require([_LT_DECL_OBJDUMP]) -m4_require([_LT_DECL_DLLTOOL]) -AC_CACHE_CHECK([how to associate runtime and link libraries], -lt_cv_sharedlib_from_linklib_cmd, -[lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" - ;; -esac -]) -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - -_LT_DECL([], [sharedlib_from_linklib_cmd], [1], - [Command to associate shared and link libraries]) -])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB - - -# _LT_PATH_MANIFEST_TOOL -# ---------------------- -# locate the manifest tool -m4_defun([_LT_PATH_MANIFEST_TOOL], -[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], - [lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&AS_MESSAGE_LOG_FD - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest*]) -if test "x$lt_cv_path_mainfest_tool" != xyes; then - MANIFEST_TOOL=: -fi -_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl -])# _LT_PATH_MANIFEST_TOOL - # LT_LIB_M # -------- @@ -3506,7 +3259,7 @@ [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in -*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) @@ -3534,12 +3287,7 @@ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then - case $cc_basename in - nvcc*) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; - *) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; - esac + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, @@ -3556,7 +3304,6 @@ m4_defun([_LT_CMD_GLOBAL_SYMBOLS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([LT_PATH_NM])dnl AC_REQUIRE([LT_PATH_LD])dnl m4_require([_LT_DECL_SED])dnl @@ -3624,8 +3371,8 @@ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= @@ -3661,7 +3408,6 @@ else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no @@ -3683,7 +3429,7 @@ if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" @@ -3695,18 +3441,6 @@ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT@&t@_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT@&t@_DLSYM_CONST -#else -# define LT@&t@_DLSYM_CONST const -#endif - #ifdef __cplusplus extern "C" { #endif @@ -3718,7 +3452,7 @@ cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ -LT@&t@_DLSYM_CONST struct { +const struct { const char *name; void *address; } @@ -3744,15 +3478,15 @@ _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi @@ -3785,13 +3519,6 @@ AC_MSG_RESULT(ok) fi -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], @@ -3802,8 +3529,6 @@ _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) -_LT_DECL([], [nm_file_list_spec], [1], - [Specify filename containing input files for $NM]) ]) # _LT_CMD_GLOBAL_SYMBOLS @@ -3815,6 +3540,7 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)= +AC_MSG_CHECKING([for $compiler option to produce PIC]) m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then @@ -3865,11 +3591,6 @@ # DJGPP does not support shared libraries at all _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. @@ -3919,12 +3640,6 @@ ;; esac ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; dgux*) case $cc_basename in ec++*) @@ -3981,7 +3696,7 @@ ;; esac ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler @@ -4014,8 +3729,8 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; - xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) - # IBM XL 8.0, 9.0 on PPC and BlueGene + xlc* | xlC*) + # IBM XL 8.0 on PPC _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' @@ -4077,7 +3792,7 @@ ;; solaris*) case $cc_basename in - CC* | sunCC*) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' @@ -4181,12 +3896,6 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; - hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag @@ -4229,13 +3938,6 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC' - ;; - esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in @@ -4278,7 +3980,7 @@ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) @@ -4299,13 +4001,7 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ;; - nagfor*) - # NAG Fortran compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' @@ -4317,26 +4013,26 @@ # All Alpha code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + xl*) + # IBM XL C 8.0/Fortran 10.1 on PPC _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='' - ;; *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; esac ;; esac @@ -4367,7 +4063,7 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + f77* | f90* | f95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; @@ -4424,11 +4120,9 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ;; esac - -AC_CACHE_CHECK([for $compiler option to produce PIC], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) -_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) +AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) # # Check to make sure the PIC flag actually works. @@ -4447,8 +4141,6 @@ _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], [Additional compiler flags for building library objects]) -_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], - [How to pass a linker flag through the compiler]) # # Check to make sure the static flag actually works. # @@ -4469,7 +4161,6 @@ m4_defun([_LT_LINKER_SHLIBS], [AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_DECL_SED])dnl @@ -4478,35 +4169,27 @@ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) m4_if([$1], [CXX], [ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global defined - # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; + ;; cygwin* | mingw* | cegcc*) - case $cc_basename in - cl*) ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - ;; - esac - ;; + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; + ;; esac + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ], [ runpath_var= _LT_TAGVAR(allow_undefined_flag, $1)= @@ -4569,33 +4252,7 @@ esac _LT_TAGVAR(ld_shlibs, $1)=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; - *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' @@ -4613,7 +4270,6 @@ fi supports_anon_versioning=no case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... @@ -4629,12 +4285,11 @@ _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 -*** Warning: the GNU linker, at least up to release 2.19, is reported +*** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. _LT_EOF fi @@ -4670,12 +4325,10 @@ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' @@ -4693,11 +4346,6 @@ fi ;; - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -4713,7 +4361,7 @@ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + gnu* | linux* | tpf* | k*bsd*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in @@ -4723,16 +4371,15 @@ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then - tmp_addflag=' $pic_flag' + tmp_addflag= tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -4743,17 +4390,13 @@ lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; - xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 @@ -4769,17 +4412,17 @@ fi case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) + xlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' - _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac @@ -4793,8 +4436,8 @@ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -4812,8 +4455,8 @@ _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -4859,8 +4502,8 @@ *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -4900,10 +4543,8 @@ else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi @@ -4990,9 +4631,9 @@ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' @@ -5001,19 +4642,14 @@ else # Determine the default libpath from the value encoded in an # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' @@ -5045,63 +4681,20 @@ # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; darwin* | rhapsody*) @@ -5139,7 +4732,7 @@ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -5147,7 +4740,7 @@ hpux9*) if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi @@ -5162,8 +4755,8 @@ ;; hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi @@ -5181,16 +4774,16 @@ ;; hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then + if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else @@ -5202,14 +4795,7 @@ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - m4_if($1, [], [ - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - _LT_LINKER_OPTION([if $CC understands -b], - _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], - [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi @@ -5237,34 +4823,19 @@ irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], - [lt_cv_irix_exported_symbol], - [save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - AC_LINK_IFELSE( - [AC_LANG_SOURCE( - [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], - [C++], [[int foo (void) { return 0; }]], - [Fortran 77], [[ - subroutine foo - end]], - [Fortran], [[ - subroutine foo - end]])])], - [lt_cv_irix_exported_symbol=yes], - [lt_cv_irix_exported_symbol=no]) - LDFLAGS="$save_LDFLAGS"]) - if test "$lt_cv_irix_exported_symbol" = yes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - fi + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + AC_LINK_IFELSE(int foo(void) {}, + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + ) + LDFLAGS="$save_LDFLAGS" else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' @@ -5326,17 +4897,17 @@ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' @@ -5346,13 +4917,13 @@ osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -5365,9 +4936,9 @@ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) @@ -5543,38 +5114,36 @@ # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. - AC_CACHE_CHECK([whether -lc should be explicitly linked in], - [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), - [$RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) - _LT_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) - then - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no - else - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - ]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) ;; esac fi @@ -5639,6 +5208,8 @@ to runtime path list]) _LT_TAGDECL([], [link_all_deplibs], [0], [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [fix_srcfile_path], [1], + [Fix the shell variable $srcfile for the compiler]) _LT_TAGDECL([], [always_export_symbols], [0], [Set to "yes" if exported symbols are required]) _LT_TAGDECL([], [export_symbols_cmds], [2], @@ -5649,8 +5220,6 @@ [Symbols that must always be exported]) _LT_TAGDECL([], [prelink_cmds], [2], [Commands necessary for linking programs (against libraries) with templates]) -_LT_TAGDECL([], [postlink_cmds], [2], - [Commands necessary for finishing linking programs]) _LT_TAGDECL([], [file_list_spec], [1], [Specify filename containing input files]) dnl FIXME: Not yet implemented @@ -5744,15 +5313,14 @@ ])# _LT_LANG_C_CONFIG -# _LT_LANG_CXX_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a C++ compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_CXX_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl +# _LT_PROG_CXX +# ------------ +# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ +# compiler, we have our own version here. +m4_defun([_LT_PROG_CXX], +[ +pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) +AC_PROG_CXX if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then @@ -5760,6 +5328,22 @@ else _lt_caught_CXX_error=yes fi +popdef([AC_MSG_ERROR]) +])# _LT_PROG_CXX + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([_LT_PROG_CXX], []) + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[AC_REQUIRE([_LT_PROG_CXX])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl AC_LANG_PUSH(C++) _LT_TAGVAR(archive_cmds_need_lc, $1)=no @@ -5781,8 +5365,6 @@ _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no @@ -5814,7 +5396,6 @@ # Allow CC to be a program name with arguments. lt_save_CC=$CC - lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX @@ -5832,7 +5413,6 @@ fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} - CFLAGS=$CXXFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) @@ -5854,8 +5434,8 @@ # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' @@ -5887,7 +5467,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else GXX=no @@ -5996,10 +5576,10 @@ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty # executable. - _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' @@ -6008,19 +5588,14 @@ else # Determine the default libpath from the value encoded in an # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared # libraries. @@ -6050,75 +5625,28 @@ ;; cygwin* | mingw* | pw32* | cegcc*) - case $GXX,$cc_basename in - ,cl* | no,cl*) - # Native MSVC - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # g++ - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; @@ -6160,11 +5688,6 @@ gnu*) ;; - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - hpux9*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: @@ -6189,11 +5712,11 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no @@ -6254,7 +5777,7 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then @@ -6264,10 +5787,10 @@ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi @@ -6297,7 +5820,7 @@ case $cc_basename in CC*) # SGI C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is @@ -6308,9 +5831,9 @@ *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes @@ -6321,7 +5844,7 @@ _LT_TAGVAR(inherit_rpath, $1)=yes ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler @@ -6339,7 +5862,7 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' @@ -6376,26 +5899,26 @@ pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in - *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; - *) # Version 6 and above use weak symbols + *) # Version 6 will use weak symbols _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; @@ -6403,7 +5926,7 @@ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ @@ -6422,9 +5945,9 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; - xl* | mpixl* | bgxl*) + xl*) # IBM XL 8.0 on PPC, with GNU ld _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' @@ -6444,13 +5967,13 @@ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. - output_verbose_link_cmd='func_echo_all' + output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is @@ -6519,7 +6042,7 @@ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi - output_verbose_link_cmd=func_echo_all + output_verbose_link_cmd=echo else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -6554,15 +6077,15 @@ case $host in osf3*) _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; @@ -6578,17 +6101,17 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac @@ -6598,7 +6121,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # FIXME: insert proper C++ library support @@ -6634,7 +6157,7 @@ solaris*) case $cc_basename in - CC* | sunCC*) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' @@ -6655,7 +6178,7 @@ esac _LT_TAGVAR(link_all_deplibs, $1)=yes - output_verbose_link_cmd='func_echo_all' + output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is @@ -6675,14 +6198,14 @@ if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. @@ -6693,7 +6216,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' @@ -6747,10 +6270,6 @@ CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ - '"$_LT_TAGVAR(old_archive_cmds, $1)" - _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ - '"$_LT_TAGVAR(reload_cmds, $1)" ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' @@ -6806,7 +6325,6 @@ fi # test -n "$compiler" CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC @@ -6821,29 +6339,6 @@ ])# _LT_LANG_CXX_CONFIG -# _LT_FUNC_STRIPNAME_CNF -# ---------------------- -# func_stripname_cnf prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# -# This function is identical to the (non-XSI) version of func_stripname, -# except this one can be used by m4 code that may be executed by configure, -# rather than the libtool script. -m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl -AC_REQUIRE([_LT_DECL_SED]) -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) -func_stripname_cnf () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname_cnf -])# _LT_FUNC_STRIPNAME_CNF - # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose @@ -6852,7 +6347,6 @@ # objects, libraries and library flags. m4_defun([_LT_SYS_HIDDEN_LIBDEPS], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl -AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl # Dependencies to place before and after the object being linked: _LT_TAGVAR(predep_objects, $1)= _LT_TAGVAR(postdep_objects, $1)= @@ -6903,13 +6397,6 @@ }; _LT_EOF ]) - -_lt_libdeps_save_CFLAGS=$CFLAGS -case "$CC $CFLAGS " in #( -*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -esac - dnl Parse the compiler output and extract the necessary dnl objects, libraries and library flags. if AC_TRY_EVAL(ac_compile); then @@ -6921,7 +6408,7 @@ pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in + case $p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. @@ -6930,22 +6417,13 @@ test $p = "-R"; then prev=$p continue + else + prev= fi - # Expand the sysroot to ease extracting the directories later. - if test -z "$prev"; then - case $p in - -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; - -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; - -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; - esac - fi - case $p in - =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; - esac if test "$pre_test_object_deps_done" = no; then - case ${prev} in - -L | -R) + case $p in + -L* | -R*) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. @@ -6965,10 +6443,8 @@ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" fi fi - prev= ;; - *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. @@ -7004,7 +6480,6 @@ fi $RM -f confest.$objext -CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken m4_if([$1], [CXX], @@ -7041,7 +6516,7 @@ solaris*) case $cc_basename in - CC* | sunCC*) + CC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as @@ -7085,16 +6560,32 @@ ])# _LT_SYS_HIDDEN_LIBDEPS +# _LT_PROG_F77 +# ------------ +# Since AC_PROG_F77 is broken, in that it returns the empty string +# if there is no fortran compiler, we have our own version here. +m4_defun([_LT_PROG_F77], +[ +pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) +AC_PROG_F77 +if test -z "$F77" || test "X$F77" = "Xno"; then + _lt_disable_F77=yes +fi +popdef([AC_MSG_ERROR]) +])# _LT_PROG_F77 + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([_LT_PROG_F77], []) + + # _LT_LANG_F77_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_F77_CONFIG], -[AC_LANG_PUSH(Fortran 77) -if test -z "$F77" || test "X$F77" = "Xno"; then - _lt_disable_F77=yes -fi +[AC_REQUIRE([_LT_PROG_F77])dnl +AC_LANG_PUSH(Fortran 77) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= @@ -7113,8 +6604,6 @@ _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no @@ -7154,9 +6643,7 @@ # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS CC=${F77-"f77"} - CFLAGS=$FFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) @@ -7210,24 +6697,38 @@ GCC=$lt_save_GCC CC="$lt_save_CC" - CFLAGS="$lt_save_CFLAGS" fi # test "$_lt_disable_F77" != yes AC_LANG_POP ])# _LT_LANG_F77_CONFIG +# _LT_PROG_FC +# ----------- +# Since AC_PROG_FC is broken, in that it returns the empty string +# if there is no fortran compiler, we have our own version here. +m4_defun([_LT_PROG_FC], +[ +pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) +AC_PROG_FC +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi +popdef([AC_MSG_ERROR]) +])# _LT_PROG_FC + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([_LT_PROG_FC], []) + + # _LT_LANG_FC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_FC_CONFIG], -[AC_LANG_PUSH(Fortran) - -if test -z "$FC" || test "X$FC" = "Xno"; then - _lt_disable_FC=yes -fi +[AC_REQUIRE([_LT_PROG_FC])dnl +AC_LANG_PUSH(Fortran) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= @@ -7246,8 +6747,6 @@ _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no @@ -7287,9 +6786,7 @@ # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS CC=${FC-"f95"} - CFLAGS=$FCFLAGS compiler=$CC GCC=$ac_cv_fc_compiler_gnu @@ -7345,8 +6842,7 @@ fi # test -n "$compiler" GCC=$lt_save_GCC - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS + CC="$lt_save_CC" fi # test "$_lt_disable_FC" != yes AC_LANG_POP @@ -7383,12 +6879,10 @@ _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS +lt_save_CC="$CC" lt_save_GCC=$GCC GCC=yes CC=${GCJ-"gcj"} -CFLAGS=$GCJFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" @@ -7398,8 +6892,6 @@ _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change @@ -7419,8 +6911,7 @@ AC_LANG_RESTORE GCC=$lt_save_GCC -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS +CC="$lt_save_CC" ])# _LT_LANG_GCJ_CONFIG @@ -7455,11 +6946,9 @@ # Allow CC to be a program name with arguments. lt_save_CC="$CC" -lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC= CC=${RC-"windres"} -CFLAGS= compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) @@ -7472,8 +6961,7 @@ GCC=$lt_save_GCC AC_LANG_RESTORE -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS +CC="$lt_save_CC" ])# _LT_LANG_RC_CONFIG @@ -7532,15 +7020,6 @@ AC_SUBST([OBJDUMP]) ]) -# _LT_DECL_DLLTOOL -# ---------------- -# Ensure DLLTOOL variable is set. -m4_defun([_LT_DECL_DLLTOOL], -[AC_CHECK_TOOL(DLLTOOL, dlltool, false) -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) -AC_SUBST([DLLTOOL]) -]) # _LT_DECL_SED # ------------ @@ -7634,8 +7113,8 @@ # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ + test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes @@ -7674,162 +7153,208 @@ ])# _LT_CHECK_SHELL_FEATURES -# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) -# ------------------------------------------------------ -# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and -# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. -m4_defun([_LT_PROG_FUNCTION_REPLACE], -[dnl { -sed -e '/^$1 ()$/,/^} # $1 /c\ -$1 ()\ -{\ -m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) -} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: -]) +# _LT_PROG_XSI_SHELLFNS +# --------------------- +# Bourne and XSI compatible variants of some useful shell functions. +m4_defun([_LT_PROG_XSI_SHELLFNS], +[case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} -# _LT_PROG_REPLACE_SHELLFNS -# ------------------------- -# Replace existing portable implementations of several shell functions with -# equivalent extended shell implementations where those features are available.. -m4_defun([_LT_PROG_REPLACE_SHELLFNS], -[if test x"$xsi_shell" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac]) - - _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl - func_basename_result="${1##*/}"]) - - _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}"]) +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} + +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} - _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"}]) +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $[*] )) +} - _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl - func_split_long_opt_name=${1%%=*} - func_split_long_opt_arg=${1#*=}]) +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} - _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl - func_split_short_opt_arg=${1#??} - func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" - _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac]) +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} - _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} - _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) +dnl func_dirname_and_basename +dnl A portable version of this function is already defined in general.m4sh +dnl so there is no need for it here. - _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) -fi +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; + esac +} -if test x"$lt_shell_append" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) +# sed scripts: +my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[[^=]]*=//' - _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl - func_quote_for_eval "${2}" -dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ - eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` +} - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` +} -if test x"$_lt_function_replace_fail" = x":"; then - AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) -fi -]) +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` +} -# _LT_PATH_CONVERSION_FUNCTIONS -# ----------------------------- -# Determine which file name conversion functions should be used by -# func_to_host_file (and, implicitly, by func_to_host_path). These are needed -# for certain cross-compile configurations and native mingw. -m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_MSG_CHECKING([how to convert $build file names to $host format]) -AC_CACHE_VAL(lt_cv_to_host_file_cmd, -[case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$[@]"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF esac -]) -to_host_file_cmd=$lt_cv_to_host_file_cmd -AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) -_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], - [0], [convert $build file names to $host format])dnl - -AC_MSG_CHECKING([how to convert $build file names to toolchain format]) -AC_CACHE_VAL(lt_cv_to_tool_file_cmd, -[#assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$[1]+=\$[2]" +} +_LT_EOF ;; -esac + *) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$[1]=\$$[1]\$[2]" +} + +_LT_EOF + ;; + esac ]) -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) -_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], - [0], [convert $build files to toolchain format])dnl -])# _LT_PATH_CONVERSION_FUNCTIONS diff -Nru fastjet-3.0.3+dfsg/m4/ltoptions.m4 fastjet-3.0.6+dfsg/m4/ltoptions.m4 --- fastjet-3.0.3+dfsg/m4/ltoptions.m4 2012-06-25 13:55:01.000000000 +0000 +++ fastjet-3.0.6+dfsg/m4/ltoptions.m4 2013-04-06 16:44:21.000000000 +0000 @@ -1,14 +1,13 @@ # Helper functions for option handling. -*- Autoconf -*- # -# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, -# Inc. +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. -# serial 7 ltoptions.m4 +# serial 6 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) @@ -126,7 +125,7 @@ [enable_win32_dll=yes case $host in -*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) @@ -134,13 +133,13 @@ esac test -z "$AS" && AS=as -_LT_DECL([], [AS], [1], [Assembler program])dnl +_LT_DECL([], [AS], [0], [Assembler program])dnl test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl +_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl ])# win32-dll AU_DEFUN([AC_LIBTOOL_WIN32_DLL], diff -Nru fastjet-3.0.3+dfsg/m4/ltversion.m4 fastjet-3.0.6+dfsg/m4/ltversion.m4 --- fastjet-3.0.3+dfsg/m4/ltversion.m4 2012-06-25 13:55:01.000000000 +0000 +++ fastjet-3.0.6+dfsg/m4/ltversion.m4 2013-04-06 16:44:21.000000000 +0000 @@ -7,17 +7,17 @@ # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. -# @configure_input@ +# Generated from ltversion.in. -# serial 3293 ltversion.m4 +# serial 3017 ltversion.m4 # This file is part of GNU Libtool -m4_define([LT_PACKAGE_VERSION], [2.4]) -m4_define([LT_PACKAGE_REVISION], [1.3293]) +m4_define([LT_PACKAGE_VERSION], [2.2.6b]) +m4_define([LT_PACKAGE_REVISION], [1.3017]) AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.4' -macro_revision='1.3293' +[macro_version='2.2.6b' +macro_revision='1.3017' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) diff -Nru fastjet-3.0.3+dfsg/m4/lt~obsolete.m4 fastjet-3.0.6+dfsg/m4/lt~obsolete.m4 --- fastjet-3.0.3+dfsg/m4/lt~obsolete.m4 2012-06-25 13:55:01.000000000 +0000 +++ fastjet-3.0.6+dfsg/m4/lt~obsolete.m4 2013-04-06 16:44:21.000000000 +0000 @@ -1,13 +1,13 @@ # lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # -# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. -# serial 5 lt~obsolete.m4 +# serial 4 lt~obsolete.m4 # These exist entirely to fool aclocal when bootstrapping libtool. # @@ -77,6 +77,7 @@ m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) @@ -89,10 +90,3 @@ m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) -m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) -m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) -m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) -m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) -m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) -m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) diff -Nru fastjet-3.0.3+dfsg/plugins/CMSIterativeCone/Makefile.in fastjet-3.0.6+dfsg/plugins/CMSIterativeCone/Makefile.in --- fastjet-3.0.3+dfsg/plugins/CMSIterativeCone/Makefile.in 2012-06-25 14:16:25.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/CMSIterativeCone/Makefile.in 2013-10-28 16:10:52.000000000 +0000 @@ -175,7 +175,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -208,7 +207,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -221,7 +219,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -234,7 +231,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -270,6 +266,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/CMSIterativeCone/fastjet/Makefile.in fastjet-3.0.6+dfsg/plugins/CMSIterativeCone/fastjet/Makefile.in --- fastjet-3.0.3+dfsg/plugins/CMSIterativeCone/fastjet/Makefile.in 2012-06-25 14:16:25.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/CMSIterativeCone/fastjet/Makefile.in 2013-10-28 16:10:52.000000000 +0000 @@ -110,7 +110,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -143,7 +142,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -156,7 +154,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -169,7 +166,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -205,6 +201,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/D0RunICone/Makefile.in fastjet-3.0.6+dfsg/plugins/D0RunICone/Makefile.in --- fastjet-3.0.3+dfsg/plugins/D0RunICone/Makefile.in 2012-06-25 14:16:25.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/D0RunICone/Makefile.in 2013-10-28 16:10:52.000000000 +0000 @@ -171,7 +171,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -204,7 +203,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -217,7 +215,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -230,7 +227,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -266,6 +262,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/D0RunICone/fastjet/Makefile.in fastjet-3.0.6+dfsg/plugins/D0RunICone/fastjet/Makefile.in --- fastjet-3.0.3+dfsg/plugins/D0RunICone/fastjet/Makefile.in 2012-06-25 14:16:25.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/D0RunICone/fastjet/Makefile.in 2013-10-28 16:10:52.000000000 +0000 @@ -110,7 +110,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -143,7 +142,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -156,7 +154,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -169,7 +166,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -205,6 +201,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/D0RunIICone/ConeSplitMerge.hpp fastjet-3.0.6+dfsg/plugins/D0RunIICone/ConeSplitMerge.hpp --- fastjet-3.0.3+dfsg/plugins/D0RunIICone/ConeSplitMerge.hpp 2012-06-13 14:14:51.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/D0RunIICone/ConeSplitMerge.hpp 2013-10-28 15:10:06.000000000 +0000 @@ -74,7 +74,7 @@ class ProtoJet_ET_seedET_order { public: - bool operator()(const ProtoJet & first, const ProtoJet & second) + bool operator()(const ProtoJet & first, const ProtoJet & second) const { if ( first.pT() > second.pT() ) return true; else diff -Nru fastjet-3.0.3+dfsg/plugins/D0RunIICone/Makefile.in fastjet-3.0.6+dfsg/plugins/D0RunIICone/Makefile.in --- fastjet-3.0.3+dfsg/plugins/D0RunIICone/Makefile.in 2012-06-25 14:16:25.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/D0RunIICone/Makefile.in 2013-10-28 16:10:52.000000000 +0000 @@ -172,7 +172,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -205,7 +204,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -218,7 +216,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -231,7 +228,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -267,6 +263,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/D0RunIICone/fastjet/Makefile.in fastjet-3.0.6+dfsg/plugins/D0RunIICone/fastjet/Makefile.in --- fastjet-3.0.3+dfsg/plugins/D0RunIICone/fastjet/Makefile.in 2012-06-25 14:16:25.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/D0RunIICone/fastjet/Makefile.in 2013-10-28 16:10:52.000000000 +0000 @@ -110,7 +110,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -143,7 +142,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -156,7 +154,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -169,7 +166,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -205,6 +201,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/EECambridge/Makefile.in fastjet-3.0.6+dfsg/plugins/EECambridge/Makefile.in --- fastjet-3.0.3+dfsg/plugins/EECambridge/Makefile.in 2012-06-25 14:16:25.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/EECambridge/Makefile.in 2013-10-28 16:10:52.000000000 +0000 @@ -172,7 +172,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -205,7 +204,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -218,7 +216,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -231,7 +228,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -267,6 +263,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/EECambridge/fastjet/Makefile.in fastjet-3.0.6+dfsg/plugins/EECambridge/fastjet/Makefile.in --- fastjet-3.0.3+dfsg/plugins/EECambridge/fastjet/Makefile.in 2012-06-25 14:16:25.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/EECambridge/fastjet/Makefile.in 2013-10-28 16:10:52.000000000 +0000 @@ -110,7 +110,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -143,7 +142,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -156,7 +154,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -169,7 +166,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -205,6 +201,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/GridJet/Makefile.in fastjet-3.0.6+dfsg/plugins/GridJet/Makefile.in --- fastjet-3.0.3+dfsg/plugins/GridJet/Makefile.in 2012-06-25 14:16:25.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/GridJet/Makefile.in 2013-10-28 16:10:53.000000000 +0000 @@ -170,7 +170,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -203,7 +202,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -216,7 +214,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -229,7 +226,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -265,6 +261,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/GridJet/fastjet/GridJetPlugin.hh fastjet-3.0.6+dfsg/plugins/GridJet/fastjet/GridJetPlugin.hh --- fastjet-3.0.3+dfsg/plugins/GridJet/fastjet/GridJetPlugin.hh 2012-06-13 14:14:52.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/GridJet/fastjet/GridJetPlugin.hh 2013-10-28 15:26:39.000000000 +0000 @@ -74,6 +74,15 @@ /// circular jet would give the same area. virtual double R() const; + /// returns the actual rapidity spacing of the grid + double drap() const {return _dy;} + /// returns the actual phi spacing of the grid + double dphi() const {return _dphi;} + /// returns the minimum rapidity of the grid + double rapmin() const {return _ymin;} + /// returns the maximum rapidity of the grid + double rapmax() const {return _ymax;} + private: void setup_grid(); diff -Nru fastjet-3.0.3+dfsg/plugins/GridJet/fastjet/Makefile.in fastjet-3.0.6+dfsg/plugins/GridJet/fastjet/Makefile.in --- fastjet-3.0.3+dfsg/plugins/GridJet/fastjet/Makefile.in 2012-06-25 14:16:25.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/GridJet/fastjet/Makefile.in 2013-10-28 16:10:53.000000000 +0000 @@ -110,7 +110,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -143,7 +142,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -156,7 +154,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -169,7 +166,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -205,6 +201,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/Jade/Makefile.in fastjet-3.0.6+dfsg/plugins/Jade/Makefile.in --- fastjet-3.0.3+dfsg/plugins/Jade/Makefile.in 2012-06-25 14:16:26.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/Jade/Makefile.in 2013-10-28 16:10:53.000000000 +0000 @@ -169,7 +169,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -202,7 +201,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -215,7 +213,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -228,7 +225,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -264,6 +260,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/Jade/fastjet/Makefile.in fastjet-3.0.6+dfsg/plugins/Jade/fastjet/Makefile.in --- fastjet-3.0.3+dfsg/plugins/Jade/fastjet/Makefile.in 2012-06-25 14:16:26.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/Jade/fastjet/Makefile.in 2013-10-28 16:10:53.000000000 +0000 @@ -110,7 +110,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -143,7 +142,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -156,7 +154,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -169,7 +166,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -205,6 +201,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/Makefile.in fastjet-3.0.6+dfsg/plugins/Makefile.in --- fastjet-3.0.3+dfsg/plugins/Makefile.in 2012-06-25 14:16:26.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/Makefile.in 2013-10-28 16:10:53.000000000 +0000 @@ -195,7 +195,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -228,7 +227,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -241,7 +239,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -254,7 +251,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -290,6 +286,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/NestedDefs/Makefile.in fastjet-3.0.6+dfsg/plugins/NestedDefs/Makefile.in --- fastjet-3.0.3+dfsg/plugins/NestedDefs/Makefile.in 2012-06-25 14:16:26.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/NestedDefs/Makefile.in 2013-10-28 16:10:53.000000000 +0000 @@ -171,7 +171,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -204,7 +203,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -217,7 +215,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -230,7 +227,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -266,6 +262,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/NestedDefs/fastjet/Makefile.in fastjet-3.0.6+dfsg/plugins/NestedDefs/fastjet/Makefile.in --- fastjet-3.0.3+dfsg/plugins/NestedDefs/fastjet/Makefile.in 2012-06-25 14:16:26.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/NestedDefs/fastjet/Makefile.in 2013-10-28 16:10:53.000000000 +0000 @@ -110,7 +110,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -143,7 +142,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -156,7 +154,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -169,7 +166,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -205,6 +201,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/PxCone/Makefile.in fastjet-3.0.6+dfsg/plugins/PxCone/Makefile.in --- fastjet-3.0.3+dfsg/plugins/PxCone/Makefile.in 2012-06-25 14:16:26.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/PxCone/Makefile.in 2013-10-28 16:10:53.000000000 +0000 @@ -177,7 +177,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -210,7 +209,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -223,7 +221,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -236,7 +233,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -272,6 +268,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/PxCone/fastjet/Makefile.in fastjet-3.0.6+dfsg/plugins/PxCone/fastjet/Makefile.in --- fastjet-3.0.3+dfsg/plugins/PxCone/fastjet/Makefile.in 2012-06-25 14:16:26.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/PxCone/fastjet/Makefile.in 2013-10-28 16:10:53.000000000 +0000 @@ -110,7 +110,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -143,7 +142,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -156,7 +154,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -169,7 +166,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -205,6 +201,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/Makefile.in fastjet-3.0.6+dfsg/plugins/SISCone/Makefile.in --- fastjet-3.0.3+dfsg/plugins/SISCone/Makefile.in 2012-06-25 14:16:26.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/Makefile.in 2013-10-28 16:10:53.000000000 +0000 @@ -171,7 +171,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -204,7 +203,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -217,7 +215,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -230,7 +227,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -266,6 +262,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/fastjet/Makefile.in fastjet-3.0.6+dfsg/plugins/SISCone/fastjet/Makefile.in --- fastjet-3.0.3+dfsg/plugins/SISCone/fastjet/Makefile.in 2012-06-25 14:16:26.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/fastjet/Makefile.in 2013-10-28 16:10:53.000000000 +0000 @@ -110,7 +110,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -143,7 +142,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -156,7 +154,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -169,7 +166,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -205,6 +201,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/AUTHORS fastjet-3.0.6+dfsg/plugins/SISCone/siscone/AUTHORS --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/AUTHORS 2012-06-13 14:15:01.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/AUTHORS 2013-05-03 15:47:10.000000000 +0000 @@ -6,11 +6,10 @@ France (2) PH-TH, CERN, CH-1211 Geneva 23, Switzerland; - Physics Department, Princeton University, Princeton NJ 08544, USA; LPTHE, UPMC (Univ. Paris 6), 75252 Paris cedex 05, France. phone : +33 69 08 40 11 +41 22 767 2462 email : soyez@fastjet.fr - salam@lpthe.jussieu.fr + gavin.salam@cern.ch diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/ChangeLog fastjet-3.0.6+dfsg/plugins/SISCone/siscone/ChangeLog --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/ChangeLog 2012-06-13 14:15:01.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/ChangeLog 2013-10-28 16:15:28.000000000 +0000 @@ -1,3 +1,51 @@ +2013-04-09 Gregory Soyez + + * Release of SISCone 2.0.6 + + * NEWS, doc/html/index.html + set the release date to April 9th + + * Doxyfile + Set version number to 2.0.6 + +2013-04-08 Gregory Soyez + + * doc/html/*.html: + * configure.ac: + switched version number to 2.0.6 + + * NEWS: + preparing for SISCone 2.0.6 + + * setversion.sh: minor fix (used bash instead of sh) + + * CHECKLIST: *** ADDED *** + helper checklist for the release process + +2013-04-06 Gavin Salam + + * configure.ac: + updated minimal required autotools version to 2.63 + +2013-02-05 Gavin Salam + + * autogen.sh: tried to be more tolerant of different libtool + versions (some take --version, others -V). Still have problems + on OS X 10.8 with macports , but autoreconf works fine. + + * configure.ac: + replaced AM_CONFIG_HEADER with with AC_CONFIG_HEADERS, following + error with autoconf 2.69 on OS X 10.8 with macports. + +2013-02-04 Gregory Soyez + + * siscone/Makefile.am: + do not install config.h + + * siscone/spherical/Makefile.am: + fixed directory for headers installation for the spherical + version of SISCone + 2012-01-17 Gregory Soyez * NEWS: diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/Doxyfile fastjet-3.0.6+dfsg/plugins/SISCone/siscone/Doxyfile --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/Doxyfile 2012-06-13 14:15:01.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/Doxyfile 2013-10-28 16:15:28.000000000 +0000 @@ -31,7 +31,7 @@ # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 2.0.5 +PROJECT_NUMBER = 2.0.6 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) # base path where the generated documentation will be put. diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/Makefile.in fastjet-3.0.6+dfsg/plugins/SISCone/siscone/Makefile.in --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/Makefile.in 2012-06-25 13:55:10.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/Makefile.in 2013-10-28 16:16:24.000000000 +0000 @@ -120,7 +120,6 @@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -144,7 +143,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -157,7 +155,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -170,7 +167,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -204,6 +200,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ @@ -523,7 +520,7 @@ *.zip*) \ unzip $(distdir).zip ;;\ esac - chmod -R a-w $(distdir); chmod a+w $(distdir) + chmod -R a-w $(distdir); chmod u+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/NEWS fastjet-3.0.6+dfsg/plugins/SISCone/siscone/NEWS --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/NEWS 2012-06-13 14:15:01.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/NEWS 2013-05-03 15:47:10.000000000 +0000 @@ -1,8 +1,14 @@ -This file contains the history of SISCone releases. For each of the, +This file contains the history of SISCone releases. For each one, we give a short summary of the important changes from the previous version. If you want to see a more detailed list of changes, please read the ChangeLog file. +SISCone version 2.0.6 (April 9 2013) +===================== +* Minor release fixing an issue concerning the installation of + configuration headers and bringing small updates in the autotools + build system (version to be included in FastJet>=3.0.4) + SISCone version 2.0.5 (January 17 2012) ===================== * Minor release bringing minor improvements to the build system diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/aclocal.m4 fastjet-3.0.6+dfsg/plugins/SISCone/siscone/aclocal.m4 --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/aclocal.m4 2012-06-25 13:52:06.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/aclocal.m4 2013-10-28 16:16:22.000000000 +0000 @@ -13,8 +13,8 @@ m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],, -[m4_warning([this file was generated for autoconf 2.68. +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],, +[m4_warning([this file was generated for autoconf 2.63. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) @@ -22,8 +22,7 @@ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. +# 2006, 2007, 2008 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives @@ -32,8 +31,7 @@ m4_define([_LT_COPYING], [dnl # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. +# 2006, 2007, 2008 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. @@ -60,7 +58,7 @@ # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ]) -# serial 57 LT_INIT +# serial 56 LT_INIT # LT_PREREQ(VERSION) @@ -89,7 +87,6 @@ # ------------------ AC_DEFUN([LT_INIT], [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT -AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl AC_BEFORE([$0], [LTDL_INIT])dnl @@ -106,8 +103,6 @@ AC_REQUIRE([LTOBSOLETE_VERSION])dnl m4_require([_LT_PROG_LTMAIN])dnl -_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) - dnl Parse OPTIONS _LT_SET_OPTIONS([$0], [$1]) @@ -144,7 +139,7 @@ *) break;; esac done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ]) @@ -164,9 +159,6 @@ m4_defun([_LT_SETUP], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl - _LT_DECL([], [host_alias], [0], [The host system])dnl _LT_DECL([], [host], [0])dnl _LT_DECL([], [host_os], [0])dnl @@ -189,13 +181,10 @@ dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl -m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl m4_require([_LT_CMD_RELOAD])dnl m4_require([_LT_CHECK_MAGIC_METHOD])dnl -m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_WITH_SYSROOT])dnl _LT_CONFIG_LIBTOOL_INIT([ # See if we are running on zsh, and set the options which allow our @@ -211,6 +200,7 @@ _LT_CHECK_OBJDIR m4_require([_LT_TAG_COMPILER])dnl +_LT_PROG_ECHO_BACKSLASH case $host_os in aix3*) @@ -224,6 +214,23 @@ ;; esac +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + # Global variables: ofile=libtool can_build_shared=yes @@ -264,28 +271,6 @@ ])# _LT_SETUP -# _LT_PREPARE_SED_QUOTE_VARS -# -------------------------- -# Define a few sed substitution that help us do robust quoting. -m4_defun([_LT_PREPARE_SED_QUOTE_VARS], -[# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([["`\\]]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' -]) - # _LT_PROG_LTMAIN # --------------- # Note that this code is called both from `configure', and `config.status' @@ -438,7 +423,7 @@ # declaration there will have the same value as in `configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], -[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) +[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) # _LT_CONFIG_STATUS_DECLARATIONS @@ -448,7 +433,7 @@ # embedded single quotes properly. In configure, this macro expands # each variable declared with _LT_DECL (and _LT_TAGDECL) into: # -# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' +# ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) @@ -547,20 +532,12 @@ LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$[]1 -_LTECHO_EOF' -} - # Quote evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_quote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -571,9 +548,9 @@ # Double-quote double-evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_dquote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -581,38 +558,16 @@ esac done +# Fix-up fallback echo if it was mangled by the above quoting rules. +case \$lt_ECHO in +*'\\\[$]0 --fallback-echo"')dnl " + lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` + ;; +esac + _LT_OUTPUT_LIBTOOL_INIT ]) -# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) -# ------------------------------------ -# Generate a child script FILE with all initialization necessary to -# reuse the environment learned by the parent script, and make the -# file executable. If COMMENT is supplied, it is inserted after the -# `#!' sequence but before initialization text begins. After this -# macro, additional text can be appended to FILE to form the body of -# the child script. The macro ends with non-zero status if the -# file could not be fully written (such as if the disk is full). -m4_ifdef([AS_INIT_GENERATED], -[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], -[m4_defun([_LT_GENERATED_FILE_INIT], -[m4_require([AS_PREPARE])]dnl -[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl -[lt_write_fail=0 -cat >$1 <<_ASEOF || lt_write_fail=1 -#! $SHELL -# Generated by $as_me. -$2 -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$1 <<\_ASEOF || lt_write_fail=1 -AS_SHELL_SANITIZE -_AS_PREPARE -exec AS_MESSAGE_FD>&1 -_ASEOF -test $lt_write_fail = 0 && chmod +x $1[]dnl -m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT # LT_OUTPUT # --------- @@ -622,11 +577,20 @@ AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} AC_MSG_NOTICE([creating $CONFIG_LT]) -_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], -[# Run this file to recreate a libtool stub with the current configuration.]) +cat >"$CONFIG_LT" <<_LTEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate a libtool stub with the current configuration. -cat >>"$CONFIG_LT" <<\_LTEOF lt_cl_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AS_SHELL_SANITIZE +_AS_PREPARE + +exec AS_MESSAGE_FD>&1 exec AS_MESSAGE_LOG_FD>>config.log { echo @@ -652,7 +616,7 @@ m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) configured by $[0], generated by m4_PACKAGE_STRING. -Copyright (C) 2010 Free Software Foundation, Inc. +Copyright (C) 2008 Free Software Foundation, Inc. This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." @@ -697,13 +661,15 @@ # appending to config.log, which fails on DOS, as config.log is still kept # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. -lt_cl_success=: -test "$silent" = yes && - lt_config_lt_args="$lt_config_lt_args --quiet" -exec AS_MESSAGE_LOG_FD>/dev/null -$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false -exec AS_MESSAGE_LOG_FD>>config.log -$lt_cl_success || AS_EXIT(1) +if test "$no_create" != yes; then + lt_cl_success=: + test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" + exec AS_MESSAGE_LOG_FD>/dev/null + $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false + exec AS_MESSAGE_LOG_FD>>config.log + $lt_cl_success || AS_EXIT(1) +fi ])# LT_OUTPUT @@ -766,12 +732,15 @@ # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + _LT_PROG_XSI_SHELLFNS - _LT_PROG_REPLACE_SHELLFNS + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) - mv -f "$cfgfile" "$ofile" || + mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ], @@ -877,13 +846,11 @@ AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_CXX], []) dnl AC_DEFUN([AC_LIBTOOL_F77], []) dnl AC_DEFUN([AC_LIBTOOL_FC], []) dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) -dnl AC_DEFUN([AC_LIBTOOL_RC], []) # _LT_TAG_COMPILER @@ -988,31 +955,6 @@ [lt_cv_ld_exported_symbols_list=no]) LDFLAGS="$save_LDFLAGS" ]) - AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], - [lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD - echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD - $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD - echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD - $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - ]) case $host_os in rhapsody* | darwin1.[[012]]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; @@ -1040,7 +982,7 @@ else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + if test "$DSYMUTIL" != ":"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= @@ -1060,11 +1002,7 @@ _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='' - fi + _LT_TAGVAR(whole_archive_flag_spec, $1)='' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" case $cc_basename in @@ -1072,7 +1010,7 @@ *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all + output_verbose_link_cmd=echo _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" @@ -1088,141 +1026,202 @@ fi ]) -# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) -# ---------------------------------- +# _LT_SYS_MODULE_PATH_AIX +# ----------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. -# Store the results from the different compilers for each TAGNAME. -# Allow to override them for all tags through lt_cv_aix_libpath. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl -if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], - [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ - lt_aix_libpath_sed='[ - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }]' - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi],[]) - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" - fi - ]) - aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) -fi +AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ])# _LT_SYS_MODULE_PATH_AIX # _LT_SHELL_INIT(ARG) # ------------------- m4_define([_LT_SHELL_INIT], -[m4_divert_text([M4SH-INIT], [$1 -])])# _LT_SHELL_INIT - +[ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +$1 +AC_DIVERT_POP +])# _LT_SHELL_INIT # _LT_PROG_ECHO_BACKSLASH # ----------------------- -# Find how we can fake an echo command that does not interpret backslash. -# In particular, with Autoconf 2.60 or later we add some code to the start -# of the generated configure script which will find a shell with a builtin -# printf (which we can use as an echo command). +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. m4_defun([_LT_PROG_ECHO_BACKSLASH], -[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -AC_MSG_CHECKING([how to print strings]) -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' +[_LT_SHELL_INIT([ +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$lt_ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +ECHO=${lt_ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then + # Yippee, $ECHO works! + : else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$[]1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} fi -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<_LT_EOF +[$]* +_LT_EOF + exit 0 +fi -case "$ECHO" in - printf*) AC_MSG_RESULT([printf]) ;; - print*) AC_MSG_RESULT([print -r]) ;; - *) AC_MSG_RESULT([cat]) ;; -esac +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -m4_ifdef([_AS_DETECT_SUGGESTED], -[_AS_DETECT_SUGGESTED([ - test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test "X`printf %s $ECHO`" = "X$ECHO" \ - || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) +if test -z "$lt_ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if { echo_test_string=`eval $cmd`; } 2>/dev/null && + { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null + then + break + fi + done + fi -_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) -_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) -])# _LT_PROG_ECHO_BACKSLASH + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : + else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" -# _LT_WITH_SYSROOT -# ---------------- -AC_DEFUN([_LT_WITH_SYSROOT], -[AC_MSG_CHECKING([for sysroot]) -AC_ARG_WITH([sysroot], -[ --with-sysroot[=DIR] Search for dependent libraries within DIR - (or the compiler's sysroot if not specified).], -[], [with_sysroot=no]) - -dnl lt_sysroot will always be passed unquoted. We quote it here -dnl in case the user passed a directory name. -lt_sysroot= -case ${with_sysroot} in #( - yes) - if test "$GCC" = yes; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - AC_MSG_RESULT([${with_sysroot}]) - AC_MSG_ERROR([The sysroot must be an absolute path.]) - ;; -esac + if test "X$ECHO" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + ECHO='print -r' + elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + ECHO='printf %s\n' + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + ECHO="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + ECHO=echo + fi + fi + fi + fi + fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +lt_ECHO=$ECHO +if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(lt_ECHO) +]) +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], + [An echo program that does not interpret backslashes]) +])# _LT_PROG_ECHO_BACKSLASH - AC_MSG_RESULT([${lt_sysroot:-no}]) -_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl -[dependent libraries, and in which our libraries should be installed.])]) # _LT_ENABLE_LOCK # --------------- @@ -1252,7 +1251,7 @@ ;; *-*-irix6*) # Find out which ABI we are using. - echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in @@ -1370,47 +1369,14 @@ ])# _LT_ENABLE_LOCK -# _LT_PROG_AR -# ----------- -m4_defun([_LT_PROG_AR], -[AC_CHECK_TOOLS(AR, [ar], false) -: ${AR=ar} -: ${AR_FLAGS=cru} -_LT_DECL([], [AR], [1], [The archiver]) -_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) - -AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], - [lt_cv_ar_at_file=no - AC_COMPILE_IFELSE([AC_LANG_PROGRAM], - [echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' - AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -eq 0; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -ne 0; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - ]) - ]) - -if test "x$lt_cv_ar_at_file" = xno; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi -_LT_DECL([], [archiver_list_spec], [1], - [How to feed a file listing to the archiver]) -])# _LT_PROG_AR - - # _LT_CMD_OLD_ARCHIVE # ------------------- m4_defun([_LT_CMD_OLD_ARCHIVE], -[_LT_PROG_AR +[AC_CHECK_TOOL(AR, ar, false) +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1]) AC_CHECK_TOOL(STRIP, strip, :) test -z "$STRIP" && STRIP=: @@ -1437,19 +1403,10 @@ esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac _LT_DECL([], [old_postinstall_cmds], [2]) _LT_DECL([], [old_postuninstall_cmds], [2]) _LT_TAGDECL([], [old_archive_cmds], [2], [Commands used to build an old-style archive]) -_LT_DECL([], [lock_old_archive_extraction], [0], - [Whether to use a lock for old archive extraction]) ])# _LT_CMD_OLD_ARCHIVE @@ -1474,15 +1431,15 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes @@ -1522,7 +1479,7 @@ if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes @@ -1585,11 +1542,6 @@ lt_cv_sys_max_cmd_len=8192; ;; - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. @@ -1654,8 +1606,8 @@ # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && + while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ + = "XX$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` @@ -1706,7 +1658,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -[#line $LINENO "configure" +[#line __oline__ "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -1747,13 +1699,7 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } +void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); @@ -1762,11 +1708,7 @@ if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else @@ -1942,16 +1884,16 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes @@ -2110,7 +2052,6 @@ m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ @@ -2119,23 +2060,16 @@ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= @@ -2148,7 +2082,7 @@ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' + lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; @@ -2168,13 +2102,7 @@ if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` + sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) @@ -2262,7 +2190,7 @@ m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; @@ -2293,9 +2221,8 @@ need_version=no need_lib_prefix=no - case $GCC,$cc_basename in - yes,*) - # gcc + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ @@ -2316,83 +2243,36 @@ cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH. + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' ;; *) - # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' ;; esac + dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; @@ -2479,19 +2359,6 @@ hardcode_into_libs=yes ;; -haiku*) - version_type=linux - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. @@ -2534,10 +2401,8 @@ soname_spec='${libname}${release}${shared_ext}$major' ;; esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 ;; interix[[3-9]]*) @@ -2595,7 +2460,7 @@ ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -2604,21 +2469,16 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], - [lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ - LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], - [lt_cv_shlibpath_overrides_runpath=yes])]) - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - ]) - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install @@ -2630,9 +2490,8 @@ # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -2864,8 +2723,6 @@ The last name is the one that the linker finds with -lNAME]]) _LT_DECL([], [soname_spec], [1], [[The coded name of the library, if different from the real name]]) -_LT_DECL([], [install_override_mode], [1], - [Permission mode override for installation of shared libraries]) _LT_DECL([], [postinstall_cmds], [2], [Command to use after installation of a shared archive]) _LT_DECL([], [postuninstall_cmds], [2], @@ -2978,7 +2835,6 @@ AC_REQUIRE([AC_CANONICAL_BUILD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PROG_ECHO_BACKSLASH])dnl AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], @@ -3100,11 +2956,6 @@ esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - if test "$GCC" != yes; then - reload_cmds=false - fi - ;; darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' @@ -3113,8 +2964,8 @@ fi ;; esac -_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl -_LT_TAGDECL([], [reload_cmds], [2])dnl +_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl +_LT_DECL([], [reload_cmds], [2])dnl ])# _LT_CMD_RELOAD @@ -3166,18 +3017,16 @@ # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; -cegcc*) +cegcc) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' @@ -3207,10 +3056,6 @@ lt_cv_deplibs_check_method=pass_all ;; -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in @@ -3219,11 +3064,11 @@ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac @@ -3245,7 +3090,7 @@ ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu) lt_cv_deplibs_check_method=pass_all ;; @@ -3323,21 +3168,6 @@ ;; esac ]) - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` - fi - ;; - esac -fi - file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown @@ -3345,11 +3175,7 @@ _LT_DECL([], [deplibs_check_method], [1], [Method to check whether dependent libraries are shared objects]) _LT_DECL([], [file_magic_cmd], [1], - [Command to use when deplibs_check_method = "file_magic"]) -_LT_DECL([], [file_magic_glob], [1], - [How to find potential files when deplibs_check_method = "file_magic"]) -_LT_DECL([], [want_nocaseglob], [1], - [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) + [Command to use when deplibs_check_method == "file_magic"]) ])# _LT_CHECK_MAGIC_METHOD @@ -3406,19 +3232,7 @@ NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols" - ;; - *) - DUMPBIN=: - ;; - esac - fi + AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) AC_SUBST([DUMPBIN]) if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" @@ -3431,13 +3245,13 @@ AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], [lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) cat conftest.out >&AS_MESSAGE_LOG_FD if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" @@ -3452,67 +3266,6 @@ dnl AC_DEFUN([AM_PROG_NM], []) dnl AC_DEFUN([AC_PROG_NM], []) -# _LT_CHECK_SHAREDLIB_FROM_LINKLIB -# -------------------------------- -# how to determine the name of the shared library -# associated with a specific link library. -# -- PORTME fill in with the dynamic library characteristics -m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], -[m4_require([_LT_DECL_EGREP]) -m4_require([_LT_DECL_OBJDUMP]) -m4_require([_LT_DECL_DLLTOOL]) -AC_CACHE_CHECK([how to associate runtime and link libraries], -lt_cv_sharedlib_from_linklib_cmd, -[lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" - ;; -esac -]) -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - -_LT_DECL([], [sharedlib_from_linklib_cmd], [1], - [Command to associate shared and link libraries]) -])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB - - -# _LT_PATH_MANIFEST_TOOL -# ---------------------- -# locate the manifest tool -m4_defun([_LT_PATH_MANIFEST_TOOL], -[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], - [lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&AS_MESSAGE_LOG_FD - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest*]) -if test "x$lt_cv_path_mainfest_tool" != xyes; then - MANIFEST_TOOL=: -fi -_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl -])# _LT_PATH_MANIFEST_TOOL - # LT_LIB_M # -------- @@ -3521,7 +3274,7 @@ [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in -*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) @@ -3549,12 +3302,7 @@ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then - case $cc_basename in - nvcc*) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; - *) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; - esac + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, @@ -3571,7 +3319,6 @@ m4_defun([_LT_CMD_GLOBAL_SYMBOLS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([LT_PATH_NM])dnl AC_REQUIRE([LT_PATH_LD])dnl m4_require([_LT_DECL_SED])dnl @@ -3639,8 +3386,8 @@ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= @@ -3676,7 +3423,6 @@ else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no @@ -3698,7 +3444,7 @@ if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" @@ -3710,18 +3456,6 @@ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT@&t@_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT@&t@_DLSYM_CONST -#else -# define LT@&t@_DLSYM_CONST const -#endif - #ifdef __cplusplus extern "C" { #endif @@ -3733,7 +3467,7 @@ cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ -LT@&t@_DLSYM_CONST struct { +const struct { const char *name; void *address; } @@ -3759,15 +3493,15 @@ _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi @@ -3800,13 +3534,6 @@ AC_MSG_RESULT(ok) fi -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], @@ -3817,8 +3544,6 @@ _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) -_LT_DECL([], [nm_file_list_spec], [1], - [Specify filename containing input files for $NM]) ]) # _LT_CMD_GLOBAL_SYMBOLS @@ -3830,6 +3555,7 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)= +AC_MSG_CHECKING([for $compiler option to produce PIC]) m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then @@ -3880,11 +3606,6 @@ # DJGPP does not support shared libraries at all _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. @@ -3934,12 +3655,6 @@ ;; esac ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; dgux*) case $cc_basename in ec++*) @@ -3996,7 +3711,7 @@ ;; esac ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler @@ -4029,8 +3744,8 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; - xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) - # IBM XL 8.0, 9.0 on PPC and BlueGene + xlc* | xlC*) + # IBM XL 8.0 on PPC _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' @@ -4092,7 +3807,7 @@ ;; solaris*) case $cc_basename in - CC* | sunCC*) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' @@ -4196,12 +3911,6 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; - hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag @@ -4244,13 +3953,6 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC' - ;; - esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in @@ -4293,7 +3995,7 @@ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) @@ -4314,13 +4016,7 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ;; - nagfor*) - # NAG Fortran compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' @@ -4332,26 +4028,26 @@ # All Alpha code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + xl*) + # IBM XL C 8.0/Fortran 10.1 on PPC _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='' - ;; *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; esac ;; esac @@ -4382,7 +4078,7 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + f77* | f90* | f95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; @@ -4439,11 +4135,9 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ;; esac - -AC_CACHE_CHECK([for $compiler option to produce PIC], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) -_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) +AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) # # Check to make sure the PIC flag actually works. @@ -4462,8 +4156,6 @@ _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], [Additional compiler flags for building library objects]) -_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], - [How to pass a linker flag through the compiler]) # # Check to make sure the static flag actually works. # @@ -4484,7 +4176,6 @@ m4_defun([_LT_LINKER_SHLIBS], [AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_DECL_SED])dnl @@ -4493,35 +4184,27 @@ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) m4_if([$1], [CXX], [ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global defined - # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; + ;; cygwin* | mingw* | cegcc*) - case $cc_basename in - cl*) ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - ;; - esac - ;; + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; + ;; esac + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ], [ runpath_var= _LT_TAGVAR(allow_undefined_flag, $1)= @@ -4584,33 +4267,7 @@ esac _LT_TAGVAR(ld_shlibs, $1)=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; - *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' @@ -4628,7 +4285,6 @@ fi supports_anon_versioning=no case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... @@ -4644,12 +4300,11 @@ _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 -*** Warning: the GNU linker, at least up to release 2.19, is reported +*** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. _LT_EOF fi @@ -4685,12 +4340,10 @@ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' @@ -4708,11 +4361,6 @@ fi ;; - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -4728,7 +4376,7 @@ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + gnu* | linux* | tpf* | k*bsd*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in @@ -4738,16 +4386,15 @@ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then - tmp_addflag=' $pic_flag' + tmp_addflag= tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -4758,17 +4405,13 @@ lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; - xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 @@ -4784,17 +4427,17 @@ fi case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) + xlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' - _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac @@ -4808,8 +4451,8 @@ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -4827,8 +4470,8 @@ _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -4874,8 +4517,8 @@ *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -4915,10 +4558,8 @@ else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi @@ -5005,9 +4646,9 @@ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' @@ -5016,19 +4657,14 @@ else # Determine the default libpath from the value encoded in an # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' @@ -5060,63 +4696,20 @@ # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; darwin* | rhapsody*) @@ -5154,7 +4747,7 @@ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -5162,7 +4755,7 @@ hpux9*) if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi @@ -5177,8 +4770,8 @@ ;; hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi @@ -5196,16 +4789,16 @@ ;; hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then + if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else @@ -5217,14 +4810,7 @@ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - m4_if($1, [], [ - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - _LT_LINKER_OPTION([if $CC understands -b], - _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], - [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi @@ -5252,34 +4838,19 @@ irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], - [lt_cv_irix_exported_symbol], - [save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - AC_LINK_IFELSE( - [AC_LANG_SOURCE( - [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], - [C++], [[int foo (void) { return 0; }]], - [Fortran 77], [[ - subroutine foo - end]], - [Fortran], [[ - subroutine foo - end]])])], - [lt_cv_irix_exported_symbol=yes], - [lt_cv_irix_exported_symbol=no]) - LDFLAGS="$save_LDFLAGS"]) - if test "$lt_cv_irix_exported_symbol" = yes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - fi + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + AC_LINK_IFELSE(int foo(void) {}, + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + ) + LDFLAGS="$save_LDFLAGS" else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' @@ -5341,17 +4912,17 @@ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' @@ -5361,13 +4932,13 @@ osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' @@ -5380,9 +4951,9 @@ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) @@ -5558,38 +5129,36 @@ # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. - AC_CACHE_CHECK([whether -lc should be explicitly linked in], - [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), - [$RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) - _LT_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) - then - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no - else - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - ]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) ;; esac fi @@ -5654,6 +5223,8 @@ to runtime path list]) _LT_TAGDECL([], [link_all_deplibs], [0], [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [fix_srcfile_path], [1], + [Fix the shell variable $srcfile for the compiler]) _LT_TAGDECL([], [always_export_symbols], [0], [Set to "yes" if exported symbols are required]) _LT_TAGDECL([], [export_symbols_cmds], [2], @@ -5664,8 +5235,6 @@ [Symbols that must always be exported]) _LT_TAGDECL([], [prelink_cmds], [2], [Commands necessary for linking programs (against libraries) with templates]) -_LT_TAGDECL([], [postlink_cmds], [2], - [Commands necessary for finishing linking programs]) _LT_TAGDECL([], [file_list_spec], [1], [Specify filename containing input files]) dnl FIXME: Not yet implemented @@ -5755,15 +5324,14 @@ ])# _LT_LANG_C_CONFIG -# _LT_LANG_CXX_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a C++ compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_CXX_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl +# _LT_PROG_CXX +# ------------ +# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ +# compiler, we have our own version here. +m4_defun([_LT_PROG_CXX], +[ +pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) +AC_PROG_CXX if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then @@ -5771,6 +5339,22 @@ else _lt_caught_CXX_error=yes fi +popdef([AC_MSG_ERROR]) +])# _LT_PROG_CXX + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([_LT_PROG_CXX], []) + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[AC_REQUIRE([_LT_PROG_CXX])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl AC_LANG_PUSH(C++) _LT_TAGVAR(archive_cmds_need_lc, $1)=no @@ -5792,8 +5376,6 @@ _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no @@ -5825,7 +5407,6 @@ # Allow CC to be a program name with arguments. lt_save_CC=$CC - lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX @@ -5843,7 +5424,6 @@ fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} - CFLAGS=$CXXFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) @@ -5865,8 +5445,8 @@ # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' @@ -5898,7 +5478,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else GXX=no @@ -6007,10 +5587,10 @@ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty # executable. - _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' @@ -6019,19 +5599,14 @@ else # Determine the default libpath from the value encoded in an # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared # libraries. @@ -6061,75 +5636,28 @@ ;; cygwin* | mingw* | pw32* | cegcc*) - case $GXX,$cc_basename in - ,cl* | no,cl*) - # Native MSVC - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # g++ - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; @@ -6171,11 +5699,6 @@ gnu*) ;; - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - hpux9*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: @@ -6200,11 +5723,11 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no @@ -6265,7 +5788,7 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then @@ -6275,10 +5798,10 @@ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi @@ -6308,7 +5831,7 @@ case $cc_basename in CC*) # SGI C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is @@ -6319,9 +5842,9 @@ *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes @@ -6332,7 +5855,7 @@ _LT_TAGVAR(inherit_rpath, $1)=yes ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler @@ -6350,7 +5873,7 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' @@ -6387,26 +5910,26 @@ pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in - *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; - *) # Version 6 and above use weak symbols + *) # Version 6 will use weak symbols _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; @@ -6414,7 +5937,7 @@ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ @@ -6433,9 +5956,9 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; - xl* | mpixl* | bgxl*) + xl*) # IBM XL 8.0 on PPC, with GNU ld _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' @@ -6455,13 +5978,13 @@ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. - output_verbose_link_cmd='func_echo_all' + output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is @@ -6530,7 +6053,7 @@ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi - output_verbose_link_cmd=func_echo_all + output_verbose_link_cmd=echo else _LT_TAGVAR(ld_shlibs, $1)=no fi @@ -6565,15 +6088,15 @@ case $host in osf3*) _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; @@ -6589,17 +6112,17 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac @@ -6609,7 +6132,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # FIXME: insert proper C++ library support @@ -6645,7 +6168,7 @@ solaris*) case $cc_basename in - CC* | sunCC*) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' @@ -6666,7 +6189,7 @@ esac _LT_TAGVAR(link_all_deplibs, $1)=yes - output_verbose_link_cmd='func_echo_all' + output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is @@ -6686,14 +6209,14 @@ if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. @@ -6704,7 +6227,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' @@ -6758,10 +6281,6 @@ CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ - '"$_LT_TAGVAR(old_archive_cmds, $1)" - _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ - '"$_LT_TAGVAR(reload_cmds, $1)" ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' @@ -6817,7 +6336,6 @@ fi # test -n "$compiler" CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC @@ -6832,29 +6350,6 @@ ])# _LT_LANG_CXX_CONFIG -# _LT_FUNC_STRIPNAME_CNF -# ---------------------- -# func_stripname_cnf prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# -# This function is identical to the (non-XSI) version of func_stripname, -# except this one can be used by m4 code that may be executed by configure, -# rather than the libtool script. -m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl -AC_REQUIRE([_LT_DECL_SED]) -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) -func_stripname_cnf () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname_cnf -])# _LT_FUNC_STRIPNAME_CNF - # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose @@ -6863,7 +6358,6 @@ # objects, libraries and library flags. m4_defun([_LT_SYS_HIDDEN_LIBDEPS], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl -AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl # Dependencies to place before and after the object being linked: _LT_TAGVAR(predep_objects, $1)= _LT_TAGVAR(postdep_objects, $1)= @@ -6914,13 +6408,6 @@ }; _LT_EOF ]) - -_lt_libdeps_save_CFLAGS=$CFLAGS -case "$CC $CFLAGS " in #( -*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -esac - dnl Parse the compiler output and extract the necessary dnl objects, libraries and library flags. if AC_TRY_EVAL(ac_compile); then @@ -6932,7 +6419,7 @@ pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in + case $p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. @@ -6941,22 +6428,13 @@ test $p = "-R"; then prev=$p continue + else + prev= fi - # Expand the sysroot to ease extracting the directories later. - if test -z "$prev"; then - case $p in - -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; - -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; - -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; - esac - fi - case $p in - =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; - esac if test "$pre_test_object_deps_done" = no; then - case ${prev} in - -L | -R) + case $p in + -L* | -R*) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. @@ -6976,10 +6454,8 @@ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" fi fi - prev= ;; - *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. @@ -7015,7 +6491,6 @@ fi $RM -f confest.$objext -CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken m4_if([$1], [CXX], @@ -7052,7 +6527,7 @@ solaris*) case $cc_basename in - CC* | sunCC*) + CC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as @@ -7096,16 +6571,32 @@ ])# _LT_SYS_HIDDEN_LIBDEPS +# _LT_PROG_F77 +# ------------ +# Since AC_PROG_F77 is broken, in that it returns the empty string +# if there is no fortran compiler, we have our own version here. +m4_defun([_LT_PROG_F77], +[ +pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) +AC_PROG_F77 +if test -z "$F77" || test "X$F77" = "Xno"; then + _lt_disable_F77=yes +fi +popdef([AC_MSG_ERROR]) +])# _LT_PROG_F77 + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([_LT_PROG_F77], []) + + # _LT_LANG_F77_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_F77_CONFIG], -[AC_LANG_PUSH(Fortran 77) -if test -z "$F77" || test "X$F77" = "Xno"; then - _lt_disable_F77=yes -fi +[AC_REQUIRE([_LT_PROG_F77])dnl +AC_LANG_PUSH(Fortran 77) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= @@ -7124,8 +6615,6 @@ _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no @@ -7165,9 +6654,7 @@ # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS CC=${F77-"f77"} - CFLAGS=$FFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) @@ -7221,24 +6708,38 @@ GCC=$lt_save_GCC CC="$lt_save_CC" - CFLAGS="$lt_save_CFLAGS" fi # test "$_lt_disable_F77" != yes AC_LANG_POP ])# _LT_LANG_F77_CONFIG +# _LT_PROG_FC +# ----------- +# Since AC_PROG_FC is broken, in that it returns the empty string +# if there is no fortran compiler, we have our own version here. +m4_defun([_LT_PROG_FC], +[ +pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) +AC_PROG_FC +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi +popdef([AC_MSG_ERROR]) +])# _LT_PROG_FC + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([_LT_PROG_FC], []) + + # _LT_LANG_FC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_FC_CONFIG], -[AC_LANG_PUSH(Fortran) - -if test -z "$FC" || test "X$FC" = "Xno"; then - _lt_disable_FC=yes -fi +[AC_REQUIRE([_LT_PROG_FC])dnl +AC_LANG_PUSH(Fortran) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= @@ -7257,8 +6758,6 @@ _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no @@ -7298,9 +6797,7 @@ # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS CC=${FC-"f95"} - CFLAGS=$FCFLAGS compiler=$CC GCC=$ac_cv_fc_compiler_gnu @@ -7356,8 +6853,7 @@ fi # test -n "$compiler" GCC=$lt_save_GCC - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS + CC="$lt_save_CC" fi # test "$_lt_disable_FC" != yes AC_LANG_POP @@ -7394,12 +6890,10 @@ _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS +lt_save_CC="$CC" lt_save_GCC=$GCC GCC=yes CC=${GCJ-"gcj"} -CFLAGS=$GCJFLAGS compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" @@ -7409,8 +6903,6 @@ _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) @@ -7426,8 +6918,7 @@ AC_LANG_RESTORE GCC=$lt_save_GCC -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS +CC="$lt_save_CC" ])# _LT_LANG_GCJ_CONFIG @@ -7462,11 +6953,9 @@ # Allow CC to be a program name with arguments. lt_save_CC="$CC" -lt_save_CFLAGS=$CFLAGS lt_save_GCC=$GCC GCC= CC=${RC-"windres"} -CFLAGS= compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) @@ -7479,8 +6968,7 @@ GCC=$lt_save_GCC AC_LANG_RESTORE -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS +CC="$lt_save_CC" ])# _LT_LANG_RC_CONFIG @@ -7539,15 +7027,6 @@ AC_SUBST([OBJDUMP]) ]) -# _LT_DECL_DLLTOOL -# ---------------- -# Ensure DLLTOOL variable is set. -m4_defun([_LT_DECL_DLLTOOL], -[AC_CHECK_TOOL(DLLTOOL, dlltool, false) -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) -AC_SUBST([DLLTOOL]) -]) # _LT_DECL_SED # ------------ @@ -7639,8 +7118,8 @@ # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ + test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes @@ -7679,177 +7158,222 @@ ])# _LT_CHECK_SHELL_FEATURES -# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) -# ------------------------------------------------------ -# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and -# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. -m4_defun([_LT_PROG_FUNCTION_REPLACE], -[dnl { -sed -e '/^$1 ()$/,/^} # $1 /c\ -$1 ()\ -{\ -m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) -} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: -]) +# _LT_PROG_XSI_SHELLFNS +# --------------------- +# Bourne and XSI compatible variants of some useful shell functions. +m4_defun([_LT_PROG_XSI_SHELLFNS], +[case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} -# _LT_PROG_REPLACE_SHELLFNS -# ------------------------- -# Replace existing portable implementations of several shell functions with -# equivalent extended shell implementations where those features are available.. -m4_defun([_LT_PROG_REPLACE_SHELLFNS], -[if test x"$xsi_shell" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac]) - - _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl - func_basename_result="${1##*/}"]) - - _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}"]) +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} - _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"}]) +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} - _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl - func_split_long_opt_name=${1%%=*} - func_split_long_opt_arg=${1#*=}]) +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} - _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl - func_split_short_opt_arg=${1#??} - func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} - _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac]) +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} - _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $[*] )) +} - _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} - _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) -fi +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" -if test x"$lt_shell_append" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} - _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl - func_quote_for_eval "${2}" -dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ - eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi +dnl func_dirname_and_basename +dnl A portable version of this function is already defined in general.m4sh +dnl so there is no need for it here. -if test x"$_lt_function_replace_fail" = x":"; then - AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) -fi -]) +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; + esac +} -# _LT_PATH_CONVERSION_FUNCTIONS -# ----------------------------- -# Determine which file name conversion functions should be used by -# func_to_host_file (and, implicitly, by func_to_host_path). These are needed -# for certain cross-compile configurations and native mingw. -m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_MSG_CHECKING([how to convert $build file names to $host format]) -AC_CACHE_VAL(lt_cv_to_host_file_cmd, -[case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; +# sed scripts: +my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[[^=]]*=//' + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` +} + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$[@]"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF esac -]) -to_host_file_cmd=$lt_cv_to_host_file_cmd -AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) -_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], - [0], [convert $build file names to $host format])dnl - -AC_MSG_CHECKING([how to convert $build file names to toolchain format]) -AC_CACHE_VAL(lt_cv_to_tool_file_cmd, -[#assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$[1]+=\$[2]" +} +_LT_EOF ;; -esac + *) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$[1]=\$$[1]\$[2]" +} + +_LT_EOF + ;; + esac ]) -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) -_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], - [0], [convert $build files to toolchain format])dnl -])# _LT_PATH_CONVERSION_FUNCTIONS # Helper functions for option handling. -*- Autoconf -*- # -# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, -# Inc. +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. -# serial 7 ltoptions.m4 +# serial 6 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) @@ -7964,7 +7488,7 @@ [enable_win32_dll=yes case $host in -*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) @@ -7972,13 +7496,13 @@ esac test -z "$AS" && AS=as -_LT_DECL([], [AS], [1], [Assembler program])dnl +_LT_DECL([], [AS], [0], [Assembler program])dnl test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl +_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl ])# win32-dll AU_DEFUN([AC_LIBTOOL_WIN32_DLL], @@ -8336,31 +7860,31 @@ # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. -# @configure_input@ +# Generated from ltversion.in. -# serial 3293 ltversion.m4 +# serial 3017 ltversion.m4 # This file is part of GNU Libtool -m4_define([LT_PACKAGE_VERSION], [2.4]) -m4_define([LT_PACKAGE_REVISION], [1.3293]) +m4_define([LT_PACKAGE_VERSION], [2.2.6b]) +m4_define([LT_PACKAGE_REVISION], [1.3017]) AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.4' -macro_revision='1.3293' +[macro_version='2.2.6b' +macro_revision='1.3017' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) # lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # -# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. -# serial 5 lt~obsolete.m4 +# serial 4 lt~obsolete.m4 # These exist entirely to fool aclocal when bootstrapping libtool. # @@ -8430,6 +7954,7 @@ m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) @@ -8442,13 +7967,6 @@ m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) -m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) -m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) -m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) -m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) -m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) -m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # @@ -8837,18 +8355,6 @@ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 8 - -# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. -AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) - # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/configure fastjet-3.0.6+dfsg/plugins/SISCone/siscone/configure --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/configure 2012-06-25 13:52:08.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/configure 2013-10-28 16:16:23.000000000 +0000 @@ -1,22 +1,18 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.68 for SISCone 2.0.5. -# +# Generated by GNU Autoconf 2.63 for SISCone 2.0.6. # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software -# Foundation, Inc. -# -# +# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which @@ -24,15 +20,23 @@ alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; esac + fi + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + as_nl=' ' export as_nl @@ -40,13 +44,7 @@ as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else @@ -57,7 +55,7 @@ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; - case $arg in #( + case $arg in *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; @@ -80,6 +78,13 @@ } fi +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + # IFS # We need space, tab and new line, in precisely that order. Quoting is @@ -89,16 +94,15 @@ IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( +case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done IFS=$as_save_IFS ;; @@ -110,16 +114,12 @@ fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 + { (exit 1); exit 1; } fi -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' @@ -131,263 +131,7 @@ LANGUAGE=C export LANGUAGE -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1 - - test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ - || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. - # Preserve -v and -x to the replacement shell. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL - case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; - esac - exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, -$0: including any error possibly output before this -$0: message. Then install a modern shell, or manually run -$0: the script under such a shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - +# Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr @@ -401,12 +145,8 @@ as_basename=false fi -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi +# Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ @@ -426,130 +166,565 @@ } s/.*/./; q'` -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits +# CDPATH. +$as_unset CDPATH - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no +fi - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 } -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi +exitcode=0 +if as_func_success; then + : else - as_ln_s='cp -p' + exitcode=1 + echo as_func_success failed. fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. fi -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' +if as_func_ret_success; then + : else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' + exitcode=1 + echo as_func_ret_success failed. fi -as_executable_p=$as_test_x -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi -SHELL=${CONFIG_SHELL-/bin/sh} +test \$exitcode = 0) || { (exit 1); exit 1; } +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + case $as_dir in + /*) + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS -test -n "$DJDIR" || exec 7<&0 &1 -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell bug-autoconf@gnu.org about your system, + echo including any error possibly output before this message. + echo This can help us improve future autoconf versions. + echo Configuration will now proceed without shell functions. +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$lt_ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac + +ECHO=${lt_ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then + # Yippee, $ECHO works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<_LT_EOF +$* +_LT_EOF + exit 0 +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +if test -z "$lt_ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if { echo_test_string=`eval $cmd`; } 2>/dev/null && + { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null + then + break + fi + done + fi + + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : + else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$ECHO" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + ECHO='print -r' + elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + ECHO='printf %s\n' + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + ECHO="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + ECHO=echo + fi + fi + fi + fi + fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +lt_ECHO=$ECHO +if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi + + + + +exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # @@ -563,14 +738,14 @@ subdirs= MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='SISCone' PACKAGE_TARNAME='siscone' -PACKAGE_VERSION='2.0.5' -PACKAGE_STRING='SISCone 2.0.5' +PACKAGE_VERSION='2.0.6' +PACKAGE_STRING='SISCone 2.0.6' PACKAGE_BUGREPORT='' -PACKAGE_URL='' ac_unique_file="siscone/siscone.cpp" # Factoring default headers for most tests. @@ -620,11 +795,9 @@ LIPO NMEDIT DSYMUTIL -MANIFEST_TOOL +lt_ECHO RANLIB -ac_ct_AR AR -DLLTOOL OBJDUMP NM ac_ct_DUMPBIN @@ -720,7 +893,6 @@ program_transform_name prefix exec_prefix -PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION @@ -738,7 +910,6 @@ with_pic enable_fast_install with_gnu_ld -with_sysroot enable_libtool_lock ' ac_precious_vars='build_alias @@ -816,9 +987,8 @@ fi case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. @@ -863,7 +1033,8 @@ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -889,7 +1060,8 @@ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1093,7 +1265,8 @@ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1109,7 +1282,8 @@ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1139,17 +1313,17 @@ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" + -*) { $as_echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } eval $ac_envvar=\$ac_optarg export $ac_envvar ;; @@ -1158,7 +1332,7 @@ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac @@ -1166,13 +1340,15 @@ if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" + { $as_echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 + { (exit 1); exit 1; }; } ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi @@ -1195,7 +1371,8 @@ [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" + { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } done # There might be people who depend on the old broken behavior: `$host' @@ -1209,8 +1386,8 @@ if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used" >&2 + $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -1225,9 +1402,11 @@ ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" + { $as_echo "$as_me: error: working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" + { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } # Find the source files, if location was not specified. @@ -1266,11 +1445,13 @@ fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" + { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then @@ -1296,7 +1477,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures SISCone 2.0.5 to adapt to many kinds of systems. +\`configure' configures SISCone 2.0.6 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1310,7 +1491,7 @@ --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages + -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files @@ -1366,7 +1547,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of SISCone 2.0.5:";; + short | recursive ) echo "Configuration of SISCone 2.0.6:";; esac cat <<\_ACEOF @@ -1389,8 +1570,6 @@ --with-pic try to use only PIC/non-PIC objects [default=use both] --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-sysroot=DIR Search for dependent libraries within DIR - (or the compiler's sysroot if not specified). Some influential environment variables: CC C compiler command @@ -1398,534 +1577,94 @@ LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor - CXX C++ compiler command - CXXFLAGS C++ compiler flags - CXXCPP C++ preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to the package provider. -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -SISCone configure 2.0.5 -generated by GNU Autoconf 2.68 - -Copyright (C) 2010 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_check_type LINENO TYPE VAR INCLUDES -# ------------------------------------------- -# Tests whether TYPE exists after having included INCLUDES, setting cache -# variable VAR accordingly. -ac_fn_c_check_type () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=no" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof ($2)) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof (($2))) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - eval "$3=yes" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_type - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile - -# ac_fn_cxx_try_compile LINENO -# ---------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_cxx_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_cxx_try_compile - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func - -# ac_fn_cxx_try_cpp LINENO -# ------------------------ -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_cxx_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + CXX C++ compiler command + CXXFLAGS C++ compiler flags + CXXCPP C++ preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. - ac_retval=1 +_ACEOF +ac_status=$? fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval -} # ac_fn_cxx_try_cpp +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. -# ac_fn_cxx_try_link LINENO -# ------------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_cxx_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - ac_retval=1 + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval -} # ac_fn_cxx_try_link +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +SISCone configure 2.0.6 +generated by GNU Autoconf 2.63 + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by SISCone $as_me 2.0.5, which was -generated by GNU Autoconf 2.68. Invocation command line was +It was created by SISCone $as_me 2.0.6, which was +generated by GNU Autoconf 2.63. Invocation command line was $ $0 $@ @@ -1961,8 +1700,8 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done + $as_echo "PATH: $as_dir" +done IFS=$as_save_IFS } >&5 @@ -1999,9 +1738,9 @@ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; 2) - as_fn_append ac_configure_args1 " '$ac_arg'" + ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else @@ -2017,13 +1756,13 @@ -* ) ac_must_keep_next=true ;; esac fi - as_fn_append ac_configure_args " '$ac_arg'" + ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac done done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there @@ -2035,9 +1774,11 @@ { echo - $as_echo "## ---------------- ## + cat <<\_ASBOX +## ---------------- ## ## Cache variables. ## -## ---------------- ##" +## ---------------- ## +_ASBOX echo # The following way of writing the cache mishandles newlines in values, ( @@ -2046,13 +1787,13 @@ case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; + *) $as_unset $ac_var ;; esac ;; esac done @@ -2071,9 +1812,11 @@ ) echo - $as_echo "## ----------------- ## + cat <<\_ASBOX +## ----------------- ## ## Output variables. ## -## ----------------- ##" +## ----------------- ## +_ASBOX echo for ac_var in $ac_subst_vars do @@ -2086,9 +1829,11 @@ echo if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## + cat <<\_ASBOX +## ------------------- ## ## File substitutions. ## -## ------------------- ##" +## ------------------- ## +_ASBOX echo for ac_var in $ac_subst_files do @@ -2102,9 +1847,11 @@ fi if test -s confdefs.h; then - $as_echo "## ----------- ## + cat <<\_ASBOX +## ----------- ## ## confdefs.h. ## -## ----------- ##" +## ----------- ## +_ASBOX echo cat confdefs.h echo @@ -2118,39 +1865,37 @@ exit $exit_status ' 0 for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h -$as_echo "/* confdefs.h */" > confdefs.h - # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF + cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF + cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF + cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF @@ -2159,12 +1904,7 @@ ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac + ac_site_file1=$CONFIG_SITE elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site @@ -2175,23 +1915,19 @@ for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 + if test -r "$ac_site_file"; then + { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } + . "$ac_site_file" fi done if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; @@ -2199,7 +1935,7 @@ esac fi else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 + { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi @@ -2214,11 +1950,11 @@ eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; @@ -2228,17 +1964,17 @@ ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 + { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 + { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 + { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 + { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac @@ -2250,20 +1986,43 @@ esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 + { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## + + + + + + + + + + + + + + + + + + + + + + + + ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -2292,7 +2051,9 @@ fi done if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 +$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } fi # These three variables are undocumented and unsupported, @@ -2318,10 +2079,10 @@ # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : +if test "${ac_cv_path_install+set}" = set; then $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -2329,11 +2090,11 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. @@ -2370,7 +2131,7 @@ ;; esac - done +done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir @@ -2386,7 +2147,7 @@ INSTALL=$ac_install_sh fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. @@ -2397,7 +2158,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 @@ -2408,11 +2169,15 @@ ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; + { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5 +$as_echo "$as_me: error: unsafe absolute working directory name" >&2;} + { (exit 1); exit 1; }; };; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; + { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5 +$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;} + { (exit 1); exit 1; }; };; esac # Do `set' in a subshell so we don't clobber the current shell's @@ -2434,8 +2199,11 @@ # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken -alias in your environment" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&5 +$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&2;} + { (exit 1); exit 1; }; } fi test "$2" = conftest.file @@ -2444,10 +2212,13 @@ # Ok. : else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! +Check your system clock" >&5 +$as_echo "$as_me: error: newly created file is older than distributed files! +Check your system clock" >&2;} + { (exit 1); exit 1; }; } fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +{ $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" @@ -2475,7 +2246,7 @@ am_missing_run="$MISSING --run " else am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 + { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi @@ -2496,9 +2267,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : +if test "${ac_cv_prog_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then @@ -2509,24 +2280,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 + { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -2536,9 +2307,9 @@ ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then @@ -2549,24 +2320,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -2575,7 +2346,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -2588,10 +2359,10 @@ fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : + if test "${ac_cv_path_mkdir+set}" = set; then $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -2599,7 +2370,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do + for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( @@ -2611,12 +2382,11 @@ esac done done - done +done IFS=$as_save_IFS fi - test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else @@ -2624,10 +2394,11 @@ # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. + test -d ./--version && rmdir ./--version MKDIR_P="$ac_install_sh -d" fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } mkdir_p="$MKDIR_P" @@ -2640,9 +2411,9 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : +if test "${ac_cv_prog_AWK+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then @@ -2653,24 +2424,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 + { $as_echo "$as_me:$LINENO: result: $AWK" >&5 $as_echo "$AWK" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -2678,11 +2449,11 @@ test -n "$AWK" && break done -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF @@ -2690,7 +2461,7 @@ all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; @@ -2700,11 +2471,11 @@ rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi @@ -2724,7 +2495,9 @@ am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } fi fi @@ -2740,7 +2513,7 @@ # Define the identity of the package. PACKAGE='siscone' - VERSION='2.0.5' + VERSION='2.0.6' cat >>confdefs.h <<_ACEOF @@ -2797,7 +2570,7 @@ .PHONY: am__doit END # If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= @@ -2825,12 +2598,12 @@ fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : +if test "${enable_dependency_tracking+set}" = set; then enableval=$enable_dependency_tracking; fi @@ -2855,9 +2628,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2868,24 +2641,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -2895,9 +2668,9 @@ ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then @@ -2908,24 +2681,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -2934,7 +2707,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -2948,9 +2721,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2961,24 +2734,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -2988,9 +2761,9 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -3002,18 +2775,18 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then @@ -3032,10 +2805,10 @@ fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -3047,9 +2820,9 @@ do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -3060,24 +2833,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 + { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -3091,9 +2864,9 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then @@ -3104,24 +2877,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -3134,7 +2907,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -3145,37 +2918,57 @@ fi -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } +{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } # Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" +{ (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -3191,8 +2984,8 @@ # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } +{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: @@ -3208,17 +3001,17 @@ done rm -f $ac_rmfiles -if { { ac_try="$ac_link_default" +if { (ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 (eval "$ac_link_default") 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, @@ -3235,7 +3028,7 @@ # certainly right. break;; *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi @@ -3254,41 +3047,84 @@ else ac_file='' fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 + +{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +if test -z "$ac_file"; then + $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } +{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; }; } fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } + ac_exeext=$ac_cv_exeext +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } + fi + fi +fi +{ $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" +if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with @@ -3303,83 +3139,32 @@ esac done else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } +{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 + +rm -f conftest$ac_cv_exeext +{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : +if test "${ac_cv_objext+set}" = set; then $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -3391,17 +3176,17 @@ } _ACEOF rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" +if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in @@ -3414,23 +3199,31 @@ $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } +{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } fi + rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : +if test "${ac_cv_c_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -3444,16 +3237,37 @@ return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else - ac_compiler_gnu=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes @@ -3462,16 +3276,20 @@ fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : +if test "${ac_cv_prog_cc_g+set}" = set; then $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -3482,11 +3300,35 @@ return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -3497,12 +3339,36 @@ return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : else - ac_c_werror_flag=$ac_save_c_werror_flag + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -3513,17 +3379,42 @@ return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS @@ -3540,14 +3431,18 @@ CFLAGS= fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : +if test "${ac_cv_prog_cc_c89+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include @@ -3604,9 +3499,32 @@ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : + rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cc_c89=$ac_arg +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done @@ -3617,19 +3535,17 @@ # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 + { $as_echo "$as_me:$LINENO: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 + { $as_echo "$as_me:$LINENO: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac -if test "x$ac_cv_prog_cc_c89" != xno; then : -fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -3639,9 +3555,9 @@ depcc="$CC" am_compiler_list= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then @@ -3749,7 +3665,7 @@ fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type @@ -3770,14 +3686,14 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : + if test "${ac_cv_prog_CPP+set}" = set; then $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded @@ -3792,7 +3708,11 @@ # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include @@ -3801,34 +3721,78 @@ #endif Syntax error _ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.i conftest.$ac_ext + +rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then # Broken: success on invalid input. continue else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break fi -rm -f conftest.err conftest.i conftest.$ac_ext + +rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then break fi @@ -3840,7 +3804,7 @@ else ac_cv_prog_CPP=$CPP fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes @@ -3851,7 +3815,11 @@ # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include @@ -3860,40 +3828,87 @@ #endif Syntax error _ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.i conftest.$ac_ext + +rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then # Broken: success on invalid input. continue else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. ac_preproc_ok=: break fi -rm -f conftest.err conftest.i conftest.$ac_ext + +rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } +{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } fi ac_ext=c @@ -3903,9 +3918,9 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : +if test "${ac_cv_path_GREP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then @@ -3916,7 +3931,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do + for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue @@ -3936,7 +3951,7 @@ $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val + ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" @@ -3951,24 +3966,26 @@ $ac_path_GREP_found && break 3 done done - done +done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } fi else ac_cv_path_GREP=$GREP fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : +if test "${ac_cv_path_EGREP+set}" = set; then $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 @@ -3982,7 +3999,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do + for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue @@ -4002,7 +4019,7 @@ $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val + ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" @@ -4017,10 +4034,12 @@ $ac_path_EGREP_found && break 3 done done - done +done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } fi else ac_cv_path_EGREP=$EGREP @@ -4028,17 +4047,21 @@ fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : +if test "${ac_cv_header_stdc+set}" = set; then $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include @@ -4053,23 +4076,48 @@ return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else - ac_cv_header_stdc=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - + $EGREP "memchr" >/dev/null 2>&1; then + : else ac_cv_header_stdc=no fi @@ -4079,14 +4127,18 @@ if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - + $EGREP "free" >/dev/null 2>&1; then + : else ac_cv_header_stdc=no fi @@ -4096,10 +4148,14 @@ if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : + if test "$cross_compiling" = yes; then : else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include @@ -4126,51 +4182,316 @@ return 0; } _ACEOF -if ac_fn_c_try_run "$LINENO"; then : +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF +fi + +done + + +{ $as_echo "$as_me:$LINENO: checking for int" >&5 +$as_echo_n "checking for int... " >&6; } +if test "${ac_cv_type_int+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_type_int=no +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if (sizeof (int)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if (sizeof ((int))) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_int=yes fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then -$as_echo "#define STDC_HEADERS 1" >>confdefs.h +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5 +$as_echo "$ac_cv_type_int" >&6; } + +{ $as_echo "$as_me:$LINENO: checking for long" >&5 +$as_echo_n "checking for long... " >&6; } +if test "${ac_cv_type_long+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_type_long=no +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if (sizeof (long)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if (sizeof ((long))) + return 0; + ; + return 0; +} _ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_type_long=yes fi -done - +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -ac_fn_c_check_type "$LINENO" "int" "ac_cv_type_int" "$ac_includes_default" -if test "x$ac_cv_type_int" = xyes; then : fi -ac_fn_c_check_type "$LINENO" "long" "ac_cv_type_long" "$ac_includes_default" -if test "x$ac_cv_type_long" = xyes; then : - +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5 +$as_echo "$ac_cv_type_long" >&6; } test "x${CXXFLAGS+yes}" = xyes || CXXFLAGS="-O3 -Wall -ffast-math" @@ -4189,9 +4510,9 @@ do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CXX+:} false; then : +if test "${ac_cv_prog_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then @@ -4202,24 +4523,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 + { $as_echo "$as_me:$LINENO: result: $CXX" >&5 $as_echo "$CXX" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -4233,9 +4554,9 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CXX+:} false; then : +if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CXX"; then @@ -4246,24 +4567,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CXX="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 $as_echo "$ac_ct_CXX" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -4276,7 +4597,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -4287,36 +4608,53 @@ fi fi # Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 +$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5 set X $ac_compile ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" +{ (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } -if ${ac_cv_cxx_compiler_gnu+:} false; then : +if test "${ac_cv_cxx_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -4330,16 +4668,37 @@ return 0; } _ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else - ac_compiler_gnu=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 $as_echo "$ac_cv_cxx_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GXX=yes @@ -4348,16 +4707,20 @@ fi ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 +{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 $as_echo_n "checking whether $CXX accepts -g... " >&6; } -if ${ac_cv_prog_cxx_g+:} false; then : +if test "${ac_cv_prog_cxx_g+set}" = set; then $as_echo_n "(cached) " >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -4368,11 +4731,35 @@ return 0; } _ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes else - CXXFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CXXFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -4383,12 +4770,36 @@ return 0; } _ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : else - ac_cxx_werror_flag=$ac_save_cxx_werror_flag + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -4399,17 +4810,42 @@ return 0; } _ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_prog_cxx_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 $as_echo "$ac_cv_prog_cxx_g" >&6; } if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS @@ -4434,9 +4870,9 @@ depcc="$CXX" am_compiler_list= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CXX_dependencies_compiler_type+:} false; then : +if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then @@ -4544,7 +4980,7 @@ fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 +{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type @@ -4559,23 +4995,115 @@ fi +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + +done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 + { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF @@ -4583,7 +5111,7 @@ all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; @@ -4593,22 +5121,26 @@ rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : +if test "${ac_cv_header_stdc+set}" = set; then $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include @@ -4623,23 +5155,48 @@ return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else - ac_cv_header_stdc=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no fi + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - + $EGREP "memchr" >/dev/null 2>&1; then + : else ac_cv_header_stdc=no fi @@ -4649,14 +5206,18 @@ if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - + $EGREP "free" >/dev/null 2>&1; then + : else ac_cv_header_stdc=no fi @@ -4666,10 +5227,14 @@ if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : + if test "$cross_compiling" = yes; then : else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include @@ -4696,22 +5261,51 @@ return 0; } _ACEOF -if ac_fn_c_try_run "$LINENO"; then : - +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : else - ac_cv_header_stdc=no + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi + fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then -$as_echo "#define STDC_HEADERS 1" >>confdefs.h +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF fi @@ -4719,7 +5313,7 @@ # Check whether --enable-debug was given. -if test "${enable_debug+set}" = set; then : +if test "${enable_debug+set}" = set; then enableval=$enable_debug; ENABLE_DEBUG_FLAG="$enableval" else ENABLE_DEBUG_FLAG="yes" @@ -4731,14 +5325,19 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5 + +{ $as_echo "$as_me:$LINENO: checking for cos in -lm" >&5 $as_echo_n "checking for cos in -lm... " >&6; } -if ${ac_cv_lib_m_cos+:} false; then : +if test "${ac_cv_lib_m_cos+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lm $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -4756,18 +5355,43 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_m_cos=yes else - ac_cv_lib_m_cos=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_m_cos=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_m_cos" >&5 $as_echo "$ac_cv_lib_m_cos" >&6; } -if test "x$ac_cv_lib_m_cos" = xyes; then : +if test "x$ac_cv_lib_m_cos" = x""yes; then cat >>confdefs.h <<_ACEOF #define HAVE_LIBM 1 _ACEOF @@ -4780,14 +5404,14 @@ case `pwd` in *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 + { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac -macro_version='2.4' -macro_revision='1.3293' +macro_version='2.2.6b' +macro_revision='1.3017' @@ -4805,27 +5429,35 @@ # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +{ $as_echo "$as_me:$LINENO: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : +if test "${ac_cv_build+set}" = set; then $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +$as_echo "$as_me: error: invalid value of canonical build" >&2;} + { (exit 1); exit 1; }; };; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' @@ -4841,24 +5473,28 @@ case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +{ $as_echo "$as_me:$LINENO: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : +if test "${ac_cv_host+set}" = set; then $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +$as_echo "$as_me: error: invalid value of canonical host" >&2;} + { (exit 1); exit 1; }; };; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' @@ -4874,78 +5510,9 @@ case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -$as_echo_n "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case "$ECHO" in - printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -$as_echo "printf" >&6; } ;; - print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -$as_echo "print -r" >&6; } ;; - *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -$as_echo "cat" >&6; } ;; -esac - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } -if ${ac_cv_path_SED+:} false; then : +if test "${ac_cv_path_SED+set}" = set; then $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ @@ -4953,7 +5520,7 @@ ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} + $as_unset ac_script || ac_script= if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST @@ -4962,7 +5529,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do + for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue @@ -4982,7 +5549,7 @@ $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val + ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" @@ -4997,17 +5564,19 @@ $ac_path_SED_found && break 3 done done - done +done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;} + { (exit 1); exit 1; }; } fi else ac_cv_path_SED=$SED fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed @@ -5025,9 +5594,9 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } -if ${ac_cv_path_FGREP+:} false; then : +if test "${ac_cv_path_FGREP+set}" = set; then $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 @@ -5041,7 +5610,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do + for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue @@ -5061,7 +5630,7 @@ $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val + ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" @@ -5076,10 +5645,12 @@ $ac_path_FGREP_found && break 3 done done - done +done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then - as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } fi else ac_cv_path_FGREP=$FGREP @@ -5087,7 +5658,7 @@ fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" @@ -5113,7 +5684,7 @@ # Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : +if test "${with_gnu_ld+set}" = set; then withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no @@ -5122,7 +5693,7 @@ ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 + { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) @@ -5152,13 +5723,13 @@ ;; esac elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 + { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 + { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi -if ${lt_cv_path_LD+:} false; then : +if test "${lt_cv_path_LD+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$LD"; then @@ -5189,16 +5760,18 @@ LD="$lt_cv_path_LD" if test -n "$LD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 + { $as_echo "$as_me:$LINENO: result: $LD" >&5 $as_echo "$LD" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : +if test "${lt_cv_prog_gnu_ld+set}" = set; then $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. @@ -5211,7 +5784,7 @@ ;; esac fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld @@ -5223,9 +5796,9 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +{ $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if ${lt_cv_path_NM+:} false; then : +if test "${lt_cv_path_NM+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$NM"; then @@ -5272,23 +5845,20 @@ : ${lt_cv_path_NM=no} fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - if test -n "$ac_tool_prefix"; then - for ac_prog in dumpbin "link -dump" + if test -n "$ac_tool_prefix"; then + for ac_prog in "dumpbin -symbols" "link -dump -symbols" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DUMPBIN+:} false; then : +if test "${ac_cv_prog_DUMPBIN+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then @@ -5299,24 +5869,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 + { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -5326,13 +5896,13 @@ fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in dumpbin "link -dump" + for ac_prog in "dumpbin -symbols" "link -dump -symbols" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : +if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then @@ -5343,24 +5913,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -5373,7 +5943,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -5381,15 +5951,6 @@ fi fi - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols" - ;; - *) - DUMPBIN=: - ;; - esac - fi if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" @@ -5402,33 +5963,33 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } -if ${lt_cv_nm_interface+:} false; then : +if test "${lt_cv_nm_interface+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval echo "\"\$as_me:5973: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval echo "\"\$as_me:5976: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: output\"" >&5) + (eval echo "\"\$as_me:5979: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } # find the maximum length of command line arguments -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } -if ${lt_cv_sys_max_cmd_len+:} false; then : +if test "${lt_cv_sys_max_cmd_len+set}" = set; then $as_echo_n "(cached) " >&6 else i=0 @@ -5461,11 +6022,6 @@ lt_cv_sys_max_cmd_len=8192; ;; - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. @@ -5530,8 +6086,8 @@ # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && + while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ + = "XX$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` @@ -5551,10 +6107,10 @@ fi if test -n $lt_cv_sys_max_cmd_len ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 + { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 + { $as_echo "$as_me:$LINENO: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len @@ -5568,27 +6124,27 @@ : ${MV="mv -f"} : ${RM="rm -f"} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 +{ $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ + test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 +{ $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5 $as_echo "$xsi_shell" >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 +{ $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 $as_echo_n "checking whether the shell understands \"+=\"... " >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5 $as_echo "$lt_shell_append" >&6; } @@ -5623,88 +6179,14 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 -$as_echo_n "checking how to convert $build file names to $host format... " >&6; } -if ${lt_cv_to_host_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac - -fi - -to_host_file_cmd=$lt_cv_to_host_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 -$as_echo "$lt_cv_to_host_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 -$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } -if ${lt_cv_to_tool_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - #assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac - -fi - -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 -$as_echo "$lt_cv_to_tool_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } -if ${lt_cv_ld_reload_flag+:} false; then : +if test "${lt_cv_ld_reload_flag+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in @@ -5713,11 +6195,6 @@ esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - if test "$GCC" != yes; then - reload_cmds=false - fi - ;; darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' @@ -5738,9 +6215,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : +if test "${ac_cv_prog_OBJDUMP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then @@ -5751,24 +6228,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 + { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -5778,9 +6255,9 @@ ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : +if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then @@ -5791,24 +6268,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -5817,7 +6294,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -5837,9 +6314,9 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } -if ${lt_cv_deplibs_check_method+:} false; then : +if test "${lt_cv_deplibs_check_method+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' @@ -5881,18 +6358,16 @@ # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; -cegcc*) +cegcc) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' @@ -5922,10 +6397,6 @@ lt_cv_deplibs_check_method=pass_all ;; -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in @@ -5934,11 +6405,11 @@ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac @@ -5960,7 +6431,7 @@ ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu) lt_cv_deplibs_check_method=pass_all ;; @@ -6039,182 +6510,16 @@ esac fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - - - - - - - - - - - - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -$as_echo "$DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -$as_echo "$ac_ct_DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - -test -z "$DLLTOOL" && DLLTOOL=dlltool - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 -$as_echo_n "checking how to associate runtime and link libraries... " >&6; } -if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 -$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO @@ -6223,13 +6528,11 @@ if test -n "$ac_tool_prefix"; then - for ac_prog in ar - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : +if test "${ac_cv_prog_AR+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$AR"; then @@ -6240,40 +6543,36 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_AR="${ac_tool_prefix}ar" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 + { $as_echo "$as_me:$LINENO: result: $AR" >&5 $as_echo "$AR" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi - test -n "$AR" && break - done fi -if test -z "$AR"; then +if test -z "$ac_cv_prog_AR"; then ac_ct_AR=$AR - for ac_prog in ar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AR+:} false; then : +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then @@ -6284,108 +6583,48 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_ac_ct_AR="ar" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 $as_echo "$ac_ct_AR" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi - - test -n "$ac_ct_AR" && break -done - if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi -fi - -: ${AR=ar} -: ${AR_FLAGS=cru} - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 -$as_echo_n "checking for archiver @FILE support... " >&6; } -if ${lt_cv_ar_at_file+:} false; then : - $as_echo_n "(cached) " >&6 else - lt_cv_ar_at_file=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ + AR="$ac_cv_prog_AR" +fi -int -main () -{ +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test "$ac_status" -eq 0; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test "$ac_status" -ne 0; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 -$as_echo "$lt_cv_ar_at_file" >&6; } -if test "x$lt_cv_ar_at_file" = xno; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi @@ -6396,9 +6635,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : +if test "${ac_cv_prog_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then @@ -6409,24 +6648,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 + { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -6436,9 +6675,9 @@ ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then @@ -6449,24 +6688,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -6475,7 +6714,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -6495,9 +6734,9 @@ if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : +if test "${ac_cv_prog_RANLIB+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then @@ -6508,24 +6747,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 + { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -6535,9 +6774,9 @@ ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then @@ -6548,24 +6787,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 + { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -6574,7 +6813,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -6608,18 +6847,6 @@ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac - - - - - - @@ -6664,9 +6891,9 @@ # Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if ${lt_cv_sys_global_symbol_pipe+:} false; then : +if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then $as_echo_n "(cached) " >&6 else @@ -6727,8 +6954,8 @@ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= @@ -6764,7 +6991,6 @@ else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no @@ -6783,18 +7009,18 @@ int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then # Now try to grab the symbols. nlist=conftest.nm - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "$nlist"; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" @@ -6806,18 +7032,6 @@ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - #ifdef __cplusplus extern "C" { #endif @@ -6829,7 +7043,7 @@ cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ -LT_DLSYM_CONST struct { +const struct { const char *name; void *address; } @@ -6855,19 +7069,19 @@ _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext}; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext}; then pipe_works=yes fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&5 fi @@ -6897,33 +7111,13 @@ lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 + { $as_echo "$as_me:$LINENO: result: failed" >&5 $as_echo "failed" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 + { $as_echo "$as_me:$LINENO: result: ok" >&5 $as_echo "ok" >&6; } fi -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - - - - - - - - - - - - - - @@ -6937,45 +7131,16 @@ -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 -$as_echo_n "checking for sysroot... " >&6; } -# Check whether --with-sysroot was given. -if test "${with_sysroot+set}" = set; then : - withval=$with_sysroot; -else - with_sysroot=no -fi -lt_sysroot= -case ${with_sysroot} in #( - yes) - if test "$GCC" = yes; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 -$as_echo "${with_sysroot}" >&6; } - as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 - ;; -esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 -$as_echo "${lt_sysroot:-no}" >&6; } # Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then : +if test "${enable_libtool_lock+set}" = set; then enableval=$enable_libtool_lock; fi @@ -6987,11 +7152,11 @@ ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" @@ -7005,12 +7170,12 @@ ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + echo '#line 7173 "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) @@ -7044,11 +7209,11 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in @@ -7097,9 +7262,9 @@ # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 + { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if ${lt_cv_cc_needs_belf+:} false; then : +if test "${lt_cv_cc_needs_belf+set}" = set; then $as_echo_n "(cached) " >&6 else ac_ext=c @@ -7108,7 +7273,11 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -7119,13 +7288,38 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then lt_cv_cc_needs_belf=yes else - lt_cv_cc_needs_belf=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_cc_needs_belf=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -7133,7 +7327,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf @@ -7143,11 +7337,11 @@ sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in @@ -7165,765 +7359,1419 @@ ;; esac -need_locks="$enable_libtool_lock" +need_locks="$enable_libtool_lock" + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_DSYMUTIL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_NMEDIT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. -set dummy ${ac_tool_prefix}mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : +if test "${ac_cv_prog_LIPO+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$MANIFEST_TOOL"; then - ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi -MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL -if test -n "$MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 -$as_echo "$MANIFEST_TOOL" >&6; } +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:$LINENO: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi -if test -z "$ac_cv_prog_MANIFEST_TOOL"; then - ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL - # Extract the first word of "mt", so it can be a program name with args. -set dummy mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : +if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_MANIFEST_TOOL"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi -ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL -if test -n "$ac_ct_MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 -$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_MANIFEST_TOOL" = x; then - MANIFEST_TOOL=":" + if test "x$ac_ct_LIPO" = x; then + LIPO=":" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + LIPO=$ac_ct_LIPO fi else - MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" -fi - -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 -$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } -if ${lt_cv_path_mainfest_tool+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&5 - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 -$as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test "x$lt_cv_path_mainfest_tool" != xyes; then - MANIFEST_TOOL=: + LIPO="$ac_cv_prog_LIPO" fi - - - - - - case $host_os in - rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DSYMUTIL+:} false; then : +if test "${ac_cv_prog_OTOOL+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -$as_echo "$DSYMUTIL" >&6; } +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : +if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 -$as_echo "$ac_ct_DSYMUTIL" >&6; } +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - DSYMUTIL=$ac_ct_DSYMUTIL + OTOOL=$ac_ct_OTOOL fi else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" + OTOOL="$ac_cv_prog_OTOOL" fi if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_NMEDIT+:} false; then : +if test "${ac_cv_prog_OTOOL64+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 -$as_echo "$NMEDIT" >&6; } +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if test "${lt_cv_apple_cc_single_mod+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if test "${lt_cv_ld_exported_symbols_list+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + lt_cv_ld_exported_symbols_list=yes else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_ld_exported_symbols_list=no fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : +{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + + +for ac_header in dlfcn.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + eval "$as_ac_Header=no" fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 -$as_echo "$ac_ct_NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" fi +done + + + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +if test -z "$CXX"; then + if test -n "$CCC"; then + CXX=$CCC + else if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_LIPO+:} false; then : +if test "${ac_cv_prog_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$LIPO"; then - ac_cv_prog_LIPO="$LIPO" # Let the user override the test. + if test -n "$CXX"; then + ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi -LIPO=$ac_cv_prog_LIPO -if test -n "$LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 -$as_echo "$LIPO" >&6; } +CXX=$ac_cv_prog_CXX +if test -n "$CXX"; then + { $as_echo "$as_me:$LINENO: result: $CXX" >&5 +$as_echo "$CXX" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi + test -n "$CXX" && break + done fi -if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. -set dummy lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +if test -z "$CXX"; then + ac_ct_CXX=$CXX + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_LIPO+:} false; then : +if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_LIPO"; then - ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. + if test -n "$ac_ct_CXX"; then + ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_LIPO="lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_ac_ct_CXX="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done - done +done IFS=$as_save_IFS fi fi -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -if test -n "$ac_ct_LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 -$as_echo "$ac_ct_LIPO" >&6; } +ac_ct_CXX=$ac_cv_prog_ac_ct_CXX +if test -n "$ac_ct_CXX"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 +$as_echo "$ac_ct_CXX" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_LIPO" = x; then - LIPO=":" + + test -n "$ac_ct_CXX" && break +done + + if test "x$ac_ct_CXX" = x; then + CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - LIPO=$ac_ct_LIPO + CXX=$ac_ct_CXX fi -else - LIPO="$ac_cv_prog_LIPO" fi - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL+:} false; then : + fi +fi +# Provide some information about the compiler. +$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 +$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } +if test "${ac_cv_cxx_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$OTOOL"; then - ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_compiler_gnu=no fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + fi -OTOOL=$ac_cv_prog_OTOOL -if test -n "$OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -$as_echo "$OTOOL" >&6; } +{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 +$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GXX=yes else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + GXX= fi +ac_test_CXXFLAGS=${CXXFLAGS+set} +ac_save_CXXFLAGS=$CXXFLAGS +{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 +$as_echo_n "checking whether $CXX accepts -g... " >&6; } +if test "${ac_cv_prog_cxx_g+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_save_cxx_werror_flag=$ac_cxx_werror_flag + ac_cxx_werror_flag=yes + ac_cv_prog_cxx_g=no + CXXFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +int +main () +{ -fi -if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cxx_g=yes else - if test -n "$ac_ct_OTOOL"; then - ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CXXFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL="otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cxx_werror_flag=$ac_save_cxx_werror_flag + CXXFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cxx_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -if test -n "$ac_ct_OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 -$as_echo "$ac_ct_OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - if test "x$ac_ct_OTOOL" = x; then - OTOOL=":" +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cxx_werror_flag=$ac_save_cxx_werror_flag +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 +$as_echo "$ac_cv_prog_cxx_g" >&6; } +if test "$ac_test_CXXFLAGS" = set; then + CXXFLAGS=$ac_save_CXXFLAGS +elif test $ac_cv_prog_cxx_g = yes; then + if test "$GXX" = yes; then + CXXFLAGS="-g -O2" else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL=$ac_ct_OTOOL + CXXFLAGS="-g" fi else - OTOOL="$ac_cv_prog_OTOOL" + if test "$GXX" = yes; then + CXXFLAGS="-O2" + else + CXXFLAGS= + fi fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL64+:} false; then : +depcc="$CXX" am_compiler_list= + +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$OTOOL64"; then - ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CXX_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi -done + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CXX_dependencies_compiler_type=$depmode + break + fi + fi done -IFS=$as_save_IFS + cd .. + rm -rf conftest.dir +else + am_cv_CXX_dependencies_compiler_type=none fi + fi -OTOOL64=$ac_cv_prog_OTOOL64 -if test -n "$OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 -$as_echo "$OTOOL64" >&6; } +{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } +CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then + am__fastdepCXX_TRUE= + am__fastdepCXX_FALSE='#' else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + am__fastdepCXX_TRUE='#' + am__fastdepCXX_FALSE= fi -fi -if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. -set dummy otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +$as_echo_n "checking how to run the C++ preprocessor... " >&6; } +if test -z "$CXXCPP"; then + if test "${ac_cv_prog_CXXCPP+set}" = set; then $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_OTOOL64"; then - ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" + do + ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -if test -n "$ac_ct_OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 -$as_echo "$ac_ct_OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL64" = x; then - OTOOL64=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; esac - OTOOL64=$ac_ct_OTOOL64 - fi +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + : else - OTOOL64="$ac_cv_prog_OTOOL64" -fi - - - - - - - - - - - - - - - - - - - - - - - - + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 -$as_echo_n "checking for -single_module linker flag... " >&6; } -if ${lt_cv_apple_cc_single_mod+:} false; then : - $as_echo_n "(cached) " >&6 + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue else - lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 -$as_echo "$lt_cv_apple_cc_single_mod" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 -$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if ${lt_cv_ld_exported_symbols_list+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int -main () -{ +rm -f conftest.err conftest.$ac_ext - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_ld_exported_symbols_list=yes -else - lt_cv_ld_exported_symbols_list=no +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" + + done + ac_cv_prog_CXXCPP=$CXXCPP fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 -$as_echo_n "checking for -force_load linker flag... " >&6; } -if ${lt_cv_ld_force_load+:} false; then : - $as_echo_n "(cached) " >&6 + CXXCPP=$ac_cv_prog_CXXCPP else - lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR cru libconftest.a conftest.o" >&5 - $AR cru libconftest.a conftest.o 2>&5 - echo "$RANLIB libconftest.a" >&5 - $RANLIB libconftest.a 2>&5 - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&5 - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - + ac_cv_prog_CXXCPP=$CXXCPP fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 -$as_echo "$lt_cv_ld_force_load" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac - -for ac_header in dlfcn.h -do : - ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -" -if test "x$ac_cv_header_dlfcn_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_DLFCN_H 1 +{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5 +$as_echo "$CXXCPP" >&6; } +ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error _ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. +continue fi -done +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +_lt_caught_CXX_error=yes; } +fi -func_stripname_cnf () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname_cnf +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +else + _lt_caught_CXX_error=yes +fi @@ -7940,7 +8788,7 @@ # Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then : +if test "${enable_shared+set}" = set; then enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; @@ -7971,7 +8819,7 @@ # Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : +if test "${enable_static+set}" = set; then enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; @@ -8003,7 +8851,7 @@ # Check whether --with-pic was given. -if test "${with_pic+set}" = set; then : +if test "${with_pic+set}" = set; then withval=$with_pic; pic_mode="$withval" else pic_mode=default @@ -8019,7 +8867,7 @@ # Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then : +if test "${enable_fast_install+set}" = set; then enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; @@ -8081,7 +8929,6 @@ - test -z "$LN_S" && LN_S="ln -s" @@ -8101,9 +8948,9 @@ setopt NO_GLOB_SUBST fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +{ $as_echo "$as_me:$LINENO: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } -if ${lt_cv_objdir+:} false; then : +if test "${lt_cv_objdir+set}" = set; then $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null @@ -8116,7 +8963,7 @@ fi rmdir .libs 2>/dev/null fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir @@ -8131,6 +8978,19 @@ + + + + + + + + + + + + + case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some @@ -8143,6 +9003,23 @@ ;; esac +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + # Global variables: ofile=libtool can_build_shared=yes @@ -8171,7 +9048,7 @@ *) break;; esac done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it @@ -8179,9 +9056,9 @@ case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 + { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in @@ -8232,10 +9109,10 @@ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 + { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -8245,9 +9122,9 @@ if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 + { $as_echo "$as_me:$LINENO: checking for file" >&5 $as_echo_n "checking for file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in @@ -8298,10 +9175,10 @@ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 + { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi @@ -8376,16 +9253,11 @@ lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then - case $cc_basename in - nvcc*) - lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; - *) - lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; - esac + lt_prog_compiler_no_builtin_flag=' -fno-builtin' - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no @@ -8401,15 +9273,15 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:9276: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:9280: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes @@ -8418,7 +9290,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then @@ -8438,6 +9310,8 @@ lt_prog_compiler_pic= lt_prog_compiler_static= +{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' @@ -8485,12 +9359,6 @@ lt_prog_compiler_pic='-fno-common' ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag @@ -8533,13 +9401,6 @@ lt_prog_compiler_pic='-fPIC' ;; esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - lt_prog_compiler_pic='-Xcompiler -fPIC' - ;; - esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in @@ -8581,7 +9442,7 @@ lt_prog_compiler_static='-non_shared' ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) @@ -8602,13 +9463,7 @@ lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' @@ -8620,26 +9475,26 @@ # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + xl*) + # IBM XL C 8.0/Fortran 10.1 on PPC lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; esac ;; esac @@ -8670,7 +9525,7 @@ lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + f77* | f90* | f95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; @@ -8727,25 +9582,21 @@ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac +{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +$as_echo "$lt_prog_compiler_pic" >&6; } + + + + -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic=$lt_prog_compiler_pic -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -$as_echo "$lt_cv_prog_compiler_pic" >&6; } -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if ${lt_cv_prog_compiler_pic_works+:} false; then : +if test "${lt_cv_prog_compiler_pic_works+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no @@ -8761,15 +9612,15 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:9615: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:9619: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes @@ -8778,7 +9629,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then @@ -8798,18 +9649,13 @@ - - - - - # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works+:} false; then : +if test "${lt_cv_prog_compiler_static_works+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no @@ -8822,7 +9668,7 @@ if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes @@ -8835,7 +9681,7 @@ LDFLAGS="$save_LDFLAGS" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then @@ -8850,9 +9696,9 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : +if test "${lt_cv_prog_compiler_c_o+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no @@ -8871,16 +9717,16 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:9720: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:9724: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes @@ -8897,7 +9743,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } @@ -8905,9 +9751,9 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : +if test "${lt_cv_prog_compiler_c_o+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no @@ -8926,16 +9772,16 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:9775: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:9779: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes @@ -8952,7 +9798,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } @@ -8961,7 +9807,7 @@ hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 + { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* @@ -8969,10 +9815,10 @@ touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 + { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi @@ -8985,7 +9831,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 + { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= @@ -9048,33 +9894,7 @@ esac ld_shlibs=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' @@ -9092,7 +9912,6 @@ fi supports_anon_versioning=no case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... @@ -9108,12 +9927,11 @@ ld_shlibs=no cat <<_LT_EOF 1>&2 -*** Warning: the GNU linker, at least up to release 2.19, is reported +*** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. _LT_EOF fi @@ -9149,12 +9967,10 @@ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='${wl}--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' @@ -9172,11 +9988,6 @@ fi ;; - haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - link_all_deplibs=yes - ;; - interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no @@ -9192,7 +10003,7 @@ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + gnu* | linux* | tpf* | k*bsd*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in @@ -9202,16 +10013,15 @@ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then - tmp_addflag=' $pic_flag' + tmp_addflag= tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; @@ -9222,17 +10032,13 @@ lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 @@ -9248,17 +10054,17 @@ fi case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) + xlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec= hardcode_libdir_flag_spec_ld='-rpath $libdir' - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac @@ -9272,8 +10078,8 @@ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; @@ -9291,8 +10097,8 @@ _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -9338,8 +10144,8 @@ *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -9379,10 +10185,8 @@ else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi @@ -9469,13 +10273,11 @@ allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -9486,34 +10288,54 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" - fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -fi - aix_libpath=$lt_cv_aix_libpath_ fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' @@ -9522,13 +10344,11 @@ else # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -9539,44 +10359,59 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" - fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -fi - aix_libpath=$lt_cv_aix_libpath_ fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - fi + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' @@ -9608,63 +10443,20 @@ # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - always_export_symbols=yes - file_list_spec='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, )='true' - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - old_postinstall_cmds='chmod 644 $oldlib' - postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - enable_shared_with_static_runtimes=yes - ;; - esac + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes=yes ;; darwin* | rhapsody*) @@ -9674,11 +10466,7 @@ hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - else - whole_archive_flag_spec='' - fi + whole_archive_flag_spec='' link_all_deplibs=yes allow_undefined_flag="$_lt_dar_allow_undefined" case $cc_basename in @@ -9686,7 +10474,7 @@ *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all + output_verbose_link_cmd=echo archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" @@ -9729,7 +10517,7 @@ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no @@ -9737,7 +10525,7 @@ hpux9*) if test "$GCC" = yes; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi @@ -9752,8 +10540,8 @@ ;; hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi @@ -9771,16 +10559,16 @@ ;; hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then + if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else @@ -9792,46 +10580,7 @@ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 -$as_echo_n "checking if $CC understands -b... " >&6; } -if ${lt_cv_prog_compiler__b+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler__b=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -b" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler__b=yes - fi - else - lt_cv_prog_compiler__b=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 -$as_echo "$lt_cv_prog_compiler__b" >&6; } - -if test x"$lt_cv_prog_compiler__b" = xyes; then - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -fi - + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi @@ -9859,39 +10608,52 @@ irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -if ${lt_cv_irix_exported_symbol+:} false; then : - $as_echo_n "(cached) " >&6 -else - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int foo (void) { return 0; } + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat >conftest.$ac_ext <<_ACEOF +int foo(void) {} _ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_irix_exported_symbol=yes +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + else - lt_cv_irix_exported_symbol=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -$as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test "$lt_cv_irix_exported_symbol" = yes; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' @@ -9953,17 +10715,17 @@ hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' @@ -9973,13 +10735,13 @@ osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' @@ -9992,9 +10754,9 @@ no_undefined_flag=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' - archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) @@ -10143,7 +10905,7 @@ fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no @@ -10180,52 +10942,46 @@ # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 + { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } - archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc=no + else + archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +$as_echo "$archive_cmds_need_lc" >&6; } ;; esac fi @@ -10388,7 +11144,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 + { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then @@ -10396,23 +11152,16 @@ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= @@ -10425,7 +11174,7 @@ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' + lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; @@ -10445,13 +11194,7 @@ if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([A-Za-z]:\),\1,g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` + sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi @@ -10539,7 +11282,7 @@ m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; @@ -10570,9 +11313,8 @@ need_version=no need_lib_prefix=no - case $GCC,$cc_basename in - yes,*) - # gcc + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ @@ -10593,83 +11335,36 @@ cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' ;; *) - # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' ;; esac + dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; @@ -10756,19 +11451,6 @@ hardcode_into_libs=yes ;; -haiku*) - version_type=linux - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. @@ -10811,10 +11493,8 @@ soname_spec='${libname}${release}${shared_ext}$major' ;; esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 ;; interix[3-9]*) @@ -10872,7 +11552,7 @@ ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -10881,17 +11561,16 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -10902,19 +11581,43 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then + shlibpath_overrides_runpath=yes fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir + +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install @@ -10926,9 +11629,8 @@ # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -11128,7 +11830,7 @@ dynamic_linker=no ;; esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no @@ -11230,12 +11932,7 @@ - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 + { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || @@ -11260,7 +11957,7 @@ # directories. hardcode_action=unsupported fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test "$hardcode_action" = relink || @@ -11305,14 +12002,18 @@ darwin*) # if libdl is installed we need to link against it - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 + { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : +if test "${ac_cv_lib_dl_dlopen+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -11330,18 +12031,43 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_dl_dlopen=yes else - ac_cv_lib_dl_dlopen=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else @@ -11354,18 +12080,106 @@ ;; *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -if test "x$ac_cv_func_shl_load" = xyes; then : + { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 +$as_echo_n "checking for shl_load... " >&6; } +if test "${ac_cv_func_shl_load+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ +#define shl_load innocuous_shl_load + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef shl_load + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_shl_load || defined __stub___shl_load +choke me +#endif + +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_shl_load=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_shl_load=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +$as_echo "$ac_cv_func_shl_load" >&6; } +if test "x$ac_cv_func_shl_load" = x""yes; then lt_cv_dlopen="shl_load" else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 + { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } -if ${ac_cv_lib_dld_shl_load+:} false; then : +if test "${ac_cv_lib_dld_shl_load+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -11383,32 +12197,145 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_dld_shl_load=yes else - ac_cv_lib_dld_shl_load=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_shl_load=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = xyes; then : +if test "x$ac_cv_lib_dld_shl_load" = x""yes; then lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else - ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -if test "x$ac_cv_func_dlopen" = xyes; then : + { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 +$as_echo_n "checking for dlopen... " >&6; } +if test "${ac_cv_func_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define dlopen to an innocuous variant, in case declares dlopen. + For example, HP-UX 11i declares gettimeofday. */ +#define dlopen innocuous_dlopen + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef dlopen + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_dlopen || defined __stub___dlopen +choke me +#endif + +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +$as_echo "$ac_cv_func_dlopen" >&6; } +if test "x$ac_cv_func_dlopen" = x""yes; then lt_cv_dlopen="dlopen" else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 + { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : +if test "${ac_cv_lib_dl_dlopen+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -11426,28 +12353,57 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_dl_dlopen=yes else - ac_cv_lib_dl_dlopen=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 + { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } -if ${ac_cv_lib_svld_dlopen+:} false; then : +if test "${ac_cv_lib_svld_dlopen+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -11465,28 +12421,57 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_svld_dlopen=yes else - ac_cv_lib_svld_dlopen=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_svld_dlopen=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = xyes; then : +if test "x$ac_cv_lib_svld_dlopen" = x""yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 + { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } -if ${ac_cv_lib_dld_dld_link+:} false; then : +if test "${ac_cv_lib_dld_dld_link+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -11504,18 +12489,43 @@ return 0; } _ACEOF -if ac_fn_c_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then ac_cv_lib_dld_dld_link=yes else - ac_cv_lib_dld_dld_link=no + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_dld_link=no fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = xyes; then : +if test "x$ac_cv_lib_dld_dld_link" = x""yes; then lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi @@ -11554,9 +12564,9 @@ save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 + { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self+:} false; then : +if test "${lt_cv_dlopen_self+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : @@ -11565,7 +12575,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" +#line 12578 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11606,13 +12616,7 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } +void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); @@ -11621,11 +12625,7 @@ if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else @@ -11634,11 +12634,11 @@ return status; } _LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -11655,14 +12655,14 @@ fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 + { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self_static+:} false; then : +if test "${lt_cv_dlopen_self_static+set}" = set; then $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : @@ -11671,7 +12671,7 @@ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" +#line 12674 "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -11712,13 +12712,7 @@ # endif #endif -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } +void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); @@ -11727,11 +12721,7 @@ if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else @@ -11740,11 +12730,11 @@ return status; } _LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -11761,7 +12751,7 @@ fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi @@ -11800,12 +12790,12 @@ striplib= old_striplib= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough @@ -11814,15 +12804,15 @@ if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 + { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi ;; *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } ;; esac @@ -11840,12 +12830,12 @@ # Report which library types will actually be built - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 + { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 + { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test "$can_build_shared" = "no" && enable_shared=no @@ -11866,14 +12856,14 @@ fi ;; esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 + { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 + { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 + { $as_echo "$as_me:$LINENO: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } @@ -11888,145 +12878,6 @@ CC="$lt_save_CC" - if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 -$as_echo_n "checking how to run the C++ preprocessor... " >&6; } -if test -z "$CXXCPP"; then - if ${ac_cv_prog_CXXCPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CXXCPP=$CXXCPP - -fi - CXXCPP=$ac_cv_prog_CXXCPP -else - ac_cv_prog_CXXCPP=$CXXCPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 -$as_echo "$CXXCPP" >&6; } -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -else - _lt_caught_CXX_error=yes -fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' @@ -12053,8 +12904,6 @@ module_expsym_cmds_CXX= link_all_deplibs_CXX=unknown old_archive_cmds_CXX=$old_archive_cmds -reload_flag_CXX=$reload_flag -reload_cmds_CXX=$reload_cmds no_undefined_flag_CXX= whole_archive_flag_spec_CXX= enable_shared_with_static_runtimes_CXX=no @@ -12110,7 +12959,6 @@ # Allow CC to be a program name with arguments. lt_save_CC=$CC - lt_save_CFLAGS=$CFLAGS lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX @@ -12128,7 +12976,6 @@ fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} - CFLAGS=$CXXFLAGS compiler=$CC compiler_CXX=$CC for cc_temp in $compiler""; do @@ -12139,7 +12986,7 @@ *) break;; esac done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` if test -n "$compiler"; then @@ -12157,7 +13004,7 @@ # Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : +if test "${with_gnu_ld+set}" = set; then withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no @@ -12166,7 +13013,7 @@ ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 + { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) @@ -12196,13 +13043,13 @@ ;; esac elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 + { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 + { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi -if ${lt_cv_path_LD+:} false; then : +if test "${lt_cv_path_LD+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$LD"; then @@ -12233,16 +13080,18 @@ LD="$lt_cv_path_LD" if test -n "$LD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 + { $as_echo "$as_me:$LINENO: result: $LD" >&5 $as_echo "$LD" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : +if test "${lt_cv_prog_gnu_ld+set}" = set; then $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. @@ -12255,7 +13104,7 @@ ;; esac fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld @@ -12268,8 +13117,8 @@ # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then - archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' @@ -12301,7 +13150,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else GXX=no @@ -12310,7 +13159,7 @@ fi # PORTME: fill in a description of your system's C++ link characteristics - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 + { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ld_shlibs_CXX=yes case $host_os in @@ -12411,13 +13260,11 @@ allow_undefined_flag_CXX='-berok' # Determine the default libpath from the value encoded in an empty # executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath__CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -12428,35 +13275,55 @@ return 0; } _ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX="/usr/lib:/lib" - fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -fi - aix_libpath=$lt_cv_aix_libpath__CXX fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' @@ -12465,13 +13332,11 @@ else # Determine the default libpath from the value encoded in an # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath__CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -12482,44 +13347,59 @@ return 0; } _ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX="/usr/lib:/lib" - fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -fi - aix_libpath=$lt_cv_aix_libpath__CXX fi +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_CXX=' ${wl}-bernotok' allow_undefined_flag_CXX=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_CXX='$convenience' - fi + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_CXX='$convenience' archive_cmds_need_lc_CXX=yes # This is similar to how AIX traditionally builds its shared # libraries. @@ -12549,75 +13429,28 @@ ;; cygwin* | mingw* | pw32* | cegcc*) - case $GXX,$cc_basename in - ,cl* | no,cl*) - # Native MSVC - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec_CXX=' ' - allow_undefined_flag_CXX=unsupported - always_export_symbols_CXX=yes - file_list_spec_CXX='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' - enable_shared_with_static_runtimes_CXX=yes - # Don't use ranlib - old_postinstall_cmds_CXX='chmod 644 $oldlib' - postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # g++ - # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_CXX='-L$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' - allow_undefined_flag_CXX=unsupported - always_export_symbols_CXX=no - enable_shared_with_static_runtimes_CXX=yes - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs_CXX=no - fi - ;; - esac - ;; + # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_CXX='-L$libdir' + allow_undefined_flag_CXX=unsupported + always_export_symbols_CXX=no + enable_shared_with_static_runtimes_CXX=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs_CXX=no + fi + ;; darwin* | rhapsody*) @@ -12625,11 +13458,7 @@ hardcode_direct_CXX=no hardcode_automatic_CXX=yes hardcode_shlibpath_var_CXX=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - else - whole_archive_flag_spec_CXX='' - fi + whole_archive_flag_spec_CXX='' link_all_deplibs_CXX=yes allow_undefined_flag_CXX="$_lt_dar_allow_undefined" case $cc_basename in @@ -12637,7 +13466,7 @@ *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all + output_verbose_link_cmd=echo archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" @@ -12690,11 +13519,6 @@ gnu*) ;; - haiku*) - archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - link_all_deplibs_CXX=yes - ;; - hpux9*) hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: @@ -12719,11 +13543,11 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then - archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no @@ -12784,7 +13608,7 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then @@ -12794,10 +13618,10 @@ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) - archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) - archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi @@ -12827,7 +13651,7 @@ case $cc_basename in CC*) # SGI C++ - archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is @@ -12838,9 +13662,9 @@ *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' fi fi link_all_deplibs_CXX=yes @@ -12851,7 +13675,7 @@ inherit_rpath_CXX=yes ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler @@ -12869,7 +13693,7 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' @@ -12906,26 +13730,26 @@ pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in - *pgCC\ [1-5].* | *pgcpp\ [1-5].*) + *pgCC\ [1-5]* | *pgcpp\ [1-5]*) prelink_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' old_archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ $RANLIB $oldlib' archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; - *) # Version 6 and above use weak symbols + *) # Version 6 will use weak symbols archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; @@ -12933,7 +13757,7 @@ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ @@ -12952,9 +13776,9 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; - xl* | mpixl* | bgxl*) + xl*) # IBM XL 8.0 on PPC, with GNU ld hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' @@ -12974,13 +13798,13 @@ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' hardcode_libdir_flag_spec_CXX='-R$libdir' - whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object_CXX=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. - output_verbose_link_cmd='func_echo_all' + output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is @@ -13049,7 +13873,7 @@ export_dynamic_flag_spec_CXX='${wl}-E' whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi - output_verbose_link_cmd=func_echo_all + output_verbose_link_cmd=echo else ld_shlibs_CXX=no fi @@ -13084,15 +13908,15 @@ case $host in osf3*) allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ;; *) allow_undefined_flag_CXX=' -expect_unresolved \*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' hardcode_libdir_flag_spec_CXX='-rpath $libdir' ;; @@ -13108,17 +13932,17 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac @@ -13128,7 +13952,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # FIXME: insert proper C++ library support @@ -13164,7 +13988,7 @@ solaris*) case $cc_basename in - CC* | sunCC*) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ archive_cmds_need_lc_CXX=yes no_undefined_flag_CXX=' -zdefs' @@ -13185,7 +14009,7 @@ esac link_all_deplibs_CXX=yes - output_verbose_link_cmd='func_echo_all' + output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is @@ -13205,14 +14029,14 @@ if test "$GXX" = yes && test "$with_gnu_ld" = no; then no_undefined_flag_CXX=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. @@ -13223,7 +14047,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' fi hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' @@ -13277,10 +14101,6 @@ CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~ - '"$old_archive_cmds_CXX" - reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~ - '"$reload_cmds_CXX" ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' @@ -13314,7 +14134,7 @@ ;; esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 + { $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no @@ -13342,18 +14162,11 @@ }; _LT_EOF - -_lt_libdeps_save_CFLAGS=$CFLAGS -case "$CC $CFLAGS " in #( -*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -esac - -if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then # Parse the compiler output and extract the necessary # objects, libraries and library flags. @@ -13362,7 +14175,7 @@ pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in + case $p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. @@ -13371,22 +14184,13 @@ test $p = "-R"; then prev=$p continue + else + prev= fi - # Expand the sysroot to ease extracting the directories later. - if test -z "$prev"; then - case $p in - -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; - -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; - -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; - esac - fi - case $p in - =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; - esac if test "$pre_test_object_deps_done" = no; then - case ${prev} in - -L | -R) + case $p in + -L* | -R*) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. @@ -13406,10 +14210,8 @@ postdeps_CXX="${postdeps_CXX} ${prev}${p}" fi fi - prev= ;; - *.lto.$objext) ;; # Ignore GCC LTO objects *.$objext) # This assumes that the test object file only shows up # once in the compiler output. @@ -13445,7 +14247,6 @@ fi $RM -f confest.$objext -CFLAGS=$_lt_libdeps_save_CFLAGS # PORTME: override above test on systems where it is broken case $host_os in @@ -13481,7 +14282,7 @@ solaris*) case $cc_basename in - CC* | sunCC*) + CC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as @@ -13546,6 +14347,8 @@ lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX= +{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then @@ -13595,11 +14398,6 @@ # DJGPP does not support shared libraries at all lt_prog_compiler_pic_CXX= ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static_CXX= - ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. @@ -13649,11 +14447,6 @@ ;; esac ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_CXX='-DDLL_EXPORT' - ;; dgux*) case $cc_basename in ec++*) @@ -13710,7 +14503,7 @@ ;; esac ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) + linux* | k*bsd*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler @@ -13743,8 +14536,8 @@ lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; - xlc* | xlC* | bgxl[cC]* | mpixl[cC]*) - # IBM XL 8.0, 9.0 on PPC and BlueGene + xlc* | xlC*) + # IBM XL 8.0 on PPC lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-qpic' lt_prog_compiler_static_CXX='-qstaticlink' @@ -13806,7 +14599,7 @@ ;; solaris*) case $cc_basename in - CC* | sunCC*) + CC*) # Sun C++ 4.2, 5.x and Centerline C++ lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' @@ -13871,25 +14664,18 @@ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" ;; esac +{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 +$as_echo "$lt_prog_compiler_pic_CXX" >&6; } + -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic_CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; } -lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } -if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then : +if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works_CXX=no @@ -13905,15 +14691,15 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:14694: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:14698: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_CXX=yes @@ -13922,7 +14708,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then @@ -13939,15 +14725,13 @@ - - # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works_CXX+:} false; then : +if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works_CXX=no @@ -13960,7 +14744,7 @@ if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_CXX=yes @@ -13973,7 +14757,7 @@ LDFLAGS="$save_LDFLAGS" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then @@ -13985,9 +14769,9 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : +if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no @@ -14006,16 +14790,16 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:14793: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:14797: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes @@ -14032,14 +14816,14 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : +if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no @@ -14058,16 +14842,16 @@ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval echo "\"\$as_me:14845: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 + echo "$as_me:14849: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes @@ -14084,7 +14868,7 @@ $RM conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } @@ -14093,7 +14877,7 @@ hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 + { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* @@ -14101,10 +14885,10 @@ touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 + { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi @@ -14114,41 +14898,33 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 + { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' case $host_os in aix[4-9]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global defined - # symbols, whereas GNU nm marks them as "W". if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) export_symbols_cmds_CXX="$ltdll_cmds" - ;; + ;; cygwin* | mingw* | cegcc*) - case $cc_basename in - cl*) ;; - *) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - ;; - esac - ;; + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; + ;; esac + exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 +{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no @@ -14176,52 +14952,46 @@ # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 + { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_CXX - pic_flag=$lt_prog_compiler_pic_CXX - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_CXX - allow_undefined_flag_CXX= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_CXX + pic_flag=$lt_prog_compiler_pic_CXX + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_CXX + allow_undefined_flag_CXX= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc_CXX=no - else - lt_cv_archive_cmds_need_lc_CXX=yes - fi - allow_undefined_flag_CXX=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; } - archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_CXX=no + else + archive_cmds_need_lc_CXX=yes + fi + allow_undefined_flag_CXX=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 +$as_echo "$archive_cmds_need_lc_CXX" >&6; } ;; esac fi @@ -14291,7 +15061,7 @@ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 + { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } library_names_spec= @@ -14378,7 +15148,7 @@ m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; @@ -14409,9 +15179,8 @@ need_version=no need_lib_prefix=no - case $GCC,$cc_basename in - yes,*) - # gcc + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ @@ -14432,82 +15201,36 @@ cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" + sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' ;; *) - # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' ;; esac + dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; @@ -14593,19 +15316,6 @@ hardcode_into_libs=yes ;; -haiku*) - version_type=linux - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. @@ -14648,10 +15358,8 @@ soname_spec='${libname}${release}${shared_ext}$major' ;; esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 ;; interix[3-9]*) @@ -14709,7 +15417,7 @@ ;; # This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) +linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -14718,17 +15426,16 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int @@ -14739,19 +15446,43 @@ return 0; } _ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then + shlibpath_overrides_runpath=yes fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir + +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install @@ -14763,9 +15494,8 @@ # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -14965,7 +15695,7 @@ dynamic_linker=no ;; esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no @@ -15016,9 +15746,7 @@ - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 + { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action_CXX= if test -n "$hardcode_libdir_flag_spec_CXX" || @@ -15043,7 +15771,7 @@ # directories. hardcode_action_CXX=unsupported fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 +{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 $as_echo "$hardcode_action_CXX" >&6; } if test "$hardcode_action_CXX" = relink || @@ -15065,7 +15793,6 @@ fi # test -n "$compiler" CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC @@ -15132,13 +15859,13 @@ case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; + *) $as_unset $ac_var ;; esac ;; esac done @@ -15146,8 +15873,8 @@ (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" @@ -15169,23 +15896,12 @@ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 + test "x$cache_file" != "x/dev/null" && + { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi + cat confcache >$cache_file else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 + { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi @@ -15199,15 +15915,14 @@ ac_libobjs= ac_ltlibobjs= -U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs @@ -15223,26 +15938,41 @@ fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } fi -: "${CONFIG_STATUS=./config.status}" +: ${CONFIG_STATUS=./config.status} ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. @@ -15252,18 +15982,17 @@ debug=false ac_cs_recheck=false ac_cs_silent=false - SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which @@ -15271,15 +16000,23 @@ alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; esac + fi + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + as_nl=' ' export as_nl @@ -15287,13 +16024,7 @@ as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else @@ -15304,7 +16035,7 @@ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; - case $arg in #( + case $arg in *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; @@ -15327,6 +16058,13 @@ } fi +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + # IFS # We need space, tab and new line, in precisely that order. Quoting is @@ -15336,16 +16074,15 @@ IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( +case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done IFS=$as_save_IFS ;; @@ -15357,16 +16094,12 @@ fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 + { (exit 1); exit 1; } fi -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' @@ -15378,89 +16111,7 @@ LANGUAGE=C export LANGUAGE -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - +# Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr @@ -15474,12 +16125,8 @@ as_basename=false fi -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi +# Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ @@ -15499,103 +16146,106 @@ } s/.*/./; q'` -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits +# CDPATH. +$as_unset CDPATH + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( +case `echo -n x` in -n*) - case `echo 'xy\c'` in + case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; + *) ECHO_C='\c';; esac;; *) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null -} # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' + as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false @@ -15614,10 +16264,10 @@ if test -d "$1"; then test -d "$1/."; else - case $1 in #( + case $1 in -*)set "./$1";; esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' @@ -15632,19 +16282,13 @@ exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to +# Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by SISCone $as_me 2.0.5, which was -generated by GNU Autoconf 2.68. Invocation command line was +This file was extended by SISCone $as_me 2.0.6, which was +generated by GNU Autoconf 2.63. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -15676,15 +16320,13 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. +\`$as_me' instantiates files from templates according to the +current configuration. -Usage: $0 [OPTION]... [TAG]... +Usage: $0 [OPTION]... [FILE]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit - --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files @@ -15703,17 +16345,16 @@ Configuration commands: $config_commands -Report bugs to the package provider." +Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -SISCone config.status 2.0.5 -configured by $0, generated by GNU Autoconf 2.68, - with options \\"\$ac_cs_config\\" +SISCone config.status 2.0.6 +configured by $0, generated by GNU Autoconf 2.63, + with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" -Copyright (C) 2010 Free Software Foundation, Inc. +Copyright (C) 2008 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -15731,16 +16372,11 @@ while test $# != 0 do case $1 in - --*=?*) + --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; *) ac_option=$1 ac_optarg=$2 @@ -15754,29 +16390,27 @@ ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; esac - as_fn_append CONFIG_FILES " '$ac_optarg'" + CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" + CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; + { $as_echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; };; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ @@ -15784,10 +16418,11 @@ ac_cs_silent=: ;; # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; + -*) { $as_echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; - *) as_fn_append ac_config_targets " $1" + *) ac_config_targets="$ac_config_targets $1" ac_need_defaults=false ;; esac @@ -15838,208 +16473,184 @@ sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' -macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' -lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' -reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' -want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' -DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' -sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' -AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' -STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' -lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' -objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' -compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`' -predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`' -postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`' -predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`' -postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`' -compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`' -LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`' -reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`' -reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`' -old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' -compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`' -GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' -compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`' -archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' -module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`' -with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' -no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld_CXX='`$ECHO "$hardcode_libdir_flag_spec_ld_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`' -inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`' -link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`' -always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`' -exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`' -include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`' -prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`' -postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`' -file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`' -hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`' -compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`' -predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`' -postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`' -predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`' -postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`' -compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`' +macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' +macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' +enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' +pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' +host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' +host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' +host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' +build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' +build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' +build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' +SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' +Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' +GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' +EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' +FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' +LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' +NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' +LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' +ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' +exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' +lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' +reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' +AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' +STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' +RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' +compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' +GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' +SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' +ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' +need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' +LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' +libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' +fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' +version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' +runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' +libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' +soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' +old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' +striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' +compiler_lib_search_dirs='`$ECHO "X$compiler_lib_search_dirs" | $Xsed -e "$delay_single_quote_subst"`' +predep_objects='`$ECHO "X$predep_objects" | $Xsed -e "$delay_single_quote_subst"`' +postdep_objects='`$ECHO "X$postdep_objects" | $Xsed -e "$delay_single_quote_subst"`' +predeps='`$ECHO "X$predeps" | $Xsed -e "$delay_single_quote_subst"`' +postdeps='`$ECHO "X$postdeps" | $Xsed -e "$delay_single_quote_subst"`' +compiler_lib_search_path='`$ECHO "X$compiler_lib_search_path" | $Xsed -e "$delay_single_quote_subst"`' +LD_CXX='`$ECHO "X$LD_CXX" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_cmds_CXX='`$ECHO "X$old_archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +compiler_CXX='`$ECHO "X$compiler_CXX" | $Xsed -e "$delay_single_quote_subst"`' +GCC_CXX='`$ECHO "X$GCC_CXX" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "X$lt_prog_compiler_no_builtin_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_wl_CXX='`$ECHO "X$lt_prog_compiler_wl_CXX" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_pic_CXX='`$ECHO "X$lt_prog_compiler_pic_CXX" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_static_CXX='`$ECHO "X$lt_prog_compiler_static_CXX" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o_CXX='`$ECHO "X$lt_cv_prog_compiler_c_o_CXX" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds_need_lc_CXX='`$ECHO "X$archive_cmds_need_lc_CXX" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes_CXX='`$ECHO "X$enable_shared_with_static_runtimes_CXX" | $Xsed -e "$delay_single_quote_subst"`' +export_dynamic_flag_spec_CXX='`$ECHO "X$export_dynamic_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' +whole_archive_flag_spec_CXX='`$ECHO "X$whole_archive_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' +compiler_needs_object_CXX='`$ECHO "X$compiler_needs_object_CXX" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_new_cmds_CXX='`$ECHO "X$old_archive_from_new_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds_CXX='`$ECHO "X$old_archive_from_expsyms_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds_CXX='`$ECHO "X$archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +archive_expsym_cmds_CXX='`$ECHO "X$archive_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +module_cmds_CXX='`$ECHO "X$module_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +module_expsym_cmds_CXX='`$ECHO "X$module_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +with_gnu_ld_CXX='`$ECHO "X$with_gnu_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`' +allow_undefined_flag_CXX='`$ECHO "X$allow_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' +no_undefined_flag_CXX='`$ECHO "X$no_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_CXX='`$ECHO "X$hardcode_libdir_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld_CXX='`$ECHO "X$hardcode_libdir_flag_spec_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_separator_CXX='`$ECHO "X$hardcode_libdir_separator_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct_CXX='`$ECHO "X$hardcode_direct_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct_absolute_CXX='`$ECHO "X$hardcode_direct_absolute_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_minus_L_CXX='`$ECHO "X$hardcode_minus_L_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_shlibpath_var_CXX='`$ECHO "X$hardcode_shlibpath_var_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_automatic_CXX='`$ECHO "X$hardcode_automatic_CXX" | $Xsed -e "$delay_single_quote_subst"`' +inherit_rpath_CXX='`$ECHO "X$inherit_rpath_CXX" | $Xsed -e "$delay_single_quote_subst"`' +link_all_deplibs_CXX='`$ECHO "X$link_all_deplibs_CXX" | $Xsed -e "$delay_single_quote_subst"`' +fix_srcfile_path_CXX='`$ECHO "X$fix_srcfile_path_CXX" | $Xsed -e "$delay_single_quote_subst"`' +always_export_symbols_CXX='`$ECHO "X$always_export_symbols_CXX" | $Xsed -e "$delay_single_quote_subst"`' +export_symbols_cmds_CXX='`$ECHO "X$export_symbols_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +exclude_expsyms_CXX='`$ECHO "X$exclude_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`' +include_expsyms_CXX='`$ECHO "X$include_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`' +prelink_cmds_CXX='`$ECHO "X$prelink_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' +file_list_spec_CXX='`$ECHO "X$file_list_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_action_CXX='`$ECHO "X$hardcode_action_CXX" | $Xsed -e "$delay_single_quote_subst"`' +compiler_lib_search_dirs_CXX='`$ECHO "X$compiler_lib_search_dirs_CXX" | $Xsed -e "$delay_single_quote_subst"`' +predep_objects_CXX='`$ECHO "X$predep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`' +postdep_objects_CXX='`$ECHO "X$postdep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`' +predeps_CXX='`$ECHO "X$predeps_CXX" | $Xsed -e "$delay_single_quote_subst"`' +postdeps_CXX='`$ECHO "X$postdeps_CXX" | $Xsed -e "$delay_single_quote_subst"`' +compiler_lib_search_path_CXX='`$ECHO "X$compiler_lib_search_path_CXX" | $Xsed -e "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - # Quote evaled strings. -for var in SHELL \ -ECHO \ -SED \ +for var in SED \ GREP \ EGREP \ FGREP \ @@ -16052,13 +16663,8 @@ OBJDUMP \ deplibs_check_method \ file_magic_cmd \ -file_magic_glob \ -want_nocaseglob \ -DLLTOOL \ -sharedlib_from_linklib_cmd \ AR \ AR_FLAGS \ -archiver_list_spec \ STRIP \ RANLIB \ CC \ @@ -16068,14 +16674,14 @@ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -nm_file_list_spec \ +SHELL \ +ECHO \ lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_pic \ lt_prog_compiler_wl \ +lt_prog_compiler_pic \ lt_prog_compiler_static \ lt_cv_prog_compiler_c_o \ need_locks \ -MANIFEST_TOOL \ DSYMUTIL \ NMEDIT \ LIPO \ @@ -16091,6 +16697,7 @@ hardcode_libdir_flag_spec \ hardcode_libdir_flag_spec_ld \ hardcode_libdir_separator \ +fix_srcfile_path \ exclude_expsyms \ include_expsyms \ file_list_spec \ @@ -16098,7 +16705,6 @@ libname_spec \ library_names_spec \ soname_spec \ -install_override_mode \ finish_eval \ old_striplib \ striplib \ @@ -16109,11 +16715,10 @@ postdeps \ compiler_lib_search_path \ LD_CXX \ -reload_flag_CXX \ compiler_CXX \ lt_prog_compiler_no_builtin_flag_CXX \ -lt_prog_compiler_pic_CXX \ lt_prog_compiler_wl_CXX \ +lt_prog_compiler_pic_CXX \ lt_prog_compiler_static_CXX \ lt_cv_prog_compiler_c_o_CXX \ export_dynamic_flag_spec_CXX \ @@ -16125,6 +16730,7 @@ hardcode_libdir_flag_spec_CXX \ hardcode_libdir_flag_spec_ld_CXX \ hardcode_libdir_separator_CXX \ +fix_srcfile_path_CXX \ exclude_expsyms_CXX \ include_expsyms_CXX \ file_list_spec_CXX \ @@ -16134,9 +16740,9 @@ predeps_CXX \ postdeps_CXX \ compiler_lib_search_path_CXX; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -16158,13 +16764,11 @@ module_expsym_cmds \ export_symbols_cmds \ prelink_cmds \ -postlink_cmds \ postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ sys_lib_dlsearch_path_spec \ -reload_cmds_CXX \ old_archive_cmds_CXX \ old_archive_from_new_cmds_CXX \ old_archive_from_expsyms_cmds_CXX \ @@ -16173,11 +16777,10 @@ module_cmds_CXX \ module_expsym_cmds_CXX \ export_symbols_cmds_CXX \ -prelink_cmds_CXX \ -postlink_cmds_CXX; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in +prelink_cmds_CXX; do + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" @@ -16185,6 +16788,12 @@ esac done +# Fix-up fallback echo if it was mangled by the above quoting rules. +case \$lt_ECHO in +*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` + ;; +esac + ac_aux_dir='$ac_aux_dir' xsi_shell='$xsi_shell' lt_shell_append='$lt_shell_append' @@ -16224,7 +16833,9 @@ "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; "examples/events/Makefile") CONFIG_FILES="$CONFIG_FILES examples/events/Makefile" ;; - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; esac done @@ -16247,24 +16858,26 @@ # after its creation but before its name has been assigned to `$tmp'. $debug || { - tmp= ac_tmp= + tmp= trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 - trap 'as_fn_exit 1' 1 2 13 15 + trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" + test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp +} || +{ + $as_echo "$as_me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. @@ -16272,13 +16885,7 @@ if test -n "$CONFIG_FILES"; then -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi +ac_cr=' ' ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' @@ -16286,7 +16893,7 @@ ac_cs_awk_cr=$ac_cr fi -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +echo 'BEGIN {' >"$tmp/subs1.awk" && _ACEOF @@ -16295,18 +16902,24 @@ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } +ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -16314,7 +16927,7 @@ rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +cat >>"\$tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h @@ -16328,7 +16941,7 @@ t delim :nl h -s/\(.\{148\}\)..*/\1/ +s/\(.\{148\}\).*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p @@ -16342,7 +16955,7 @@ t nl :delim h -s/\(.\{148\}\)..*/\1/ +s/\(.\{148\}\).*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p @@ -16362,7 +16975,7 @@ rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && +cat >>"\$tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" @@ -16394,29 +17007,23 @@ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ + || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 +$as_echo "$as_me: error: could not setup config files machinery" >&2;} + { (exit 1); exit 1; }; } _ACEOF -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// s/^[^=]*=[ ]*$// }' fi @@ -16428,7 +17035,7 @@ # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || +cat >"$tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF @@ -16440,11 +17047,13 @@ # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then + ac_t=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_t"; then break elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} + { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -16529,7 +17138,9 @@ _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 +$as_echo "$as_me: error: could not setup config headers machinery" >&2;} + { (exit 1); exit 1; }; } fi # test -n "$CONFIG_HEADERS" @@ -16542,7 +17153,9 @@ esac case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 +$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} + { (exit 1); exit 1; }; };; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac @@ -16561,7 +17174,7 @@ for ac_f do case $ac_f in - -) ac_f="$ac_tmp/stdin";; + -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. @@ -16570,10 +17183,12 @@ [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" + ac_file_inputs="$ac_file_inputs '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't @@ -16584,7 +17199,7 @@ `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 + { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. @@ -16596,8 +17211,10 @@ esac case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + *:-:* | *:-) cat >"$tmp/stdin" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } ;; esac ;; esac @@ -16625,7 +17242,47 @@ q } s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } ac_builddir=. case "$ac_dir" in @@ -16682,6 +17339,7 @@ # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= + ac_sed_dataroot=' /datarootdir/ { p @@ -16691,11 +17349,12 @@ /@docdir@/p /@infodir@/p /@localedir@/p -/@mandir@/p' +/@mandir@/p +' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 + { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 @@ -16705,7 +17364,7 @@ s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; + s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF @@ -16733,24 +17392,27 @@ s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} +which seems to be undefined. Please make sure it is defined." >&2;} - rm -f "$ac_tmp/stdin" + rm -f "$tmp/stdin" case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + -) cat "$tmp/out" && rm -f "$tmp/out";; + *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } ;; :H) # @@ -16759,21 +17421,27 @@ if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" + } >"$tmp/config.h" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + mv "$tmp/config.h" "$ac_file" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } fi else $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ + || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 +$as_echo "$as_me: error: could not create -" >&2;} + { (exit 1); exit 1; }; } fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" @@ -16811,7 +17479,7 @@ s/.*/./; q'`/stamp-h$_am_stamp_count ;; - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 + :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac @@ -16906,7 +17574,47 @@ q } s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p + { as_dir=$dirpart/$fdir + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done @@ -16934,8 +17642,7 @@ # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. +# 2006, 2007, 2008 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. @@ -16983,12 +17690,6 @@ # Whether or not to optimize for fast installation. fast_install=$enable_fast_install -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that protects backslashes. -ECHO=$lt_ECHO - # The host system. host_alias=$host_alias host=$host @@ -17038,11 +17739,9 @@ # turn newlines into spaces. NL2SP=$lt_lt_NL2SP -# convert \$build file names to \$host format. -to_host_file_cmd=$lt_cv_to_host_file_cmd - -# convert \$build files to toolchain format. -to_tool_file_cmd=$lt_cv_to_tool_file_cmd +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds # An object symbol dumper. OBJDUMP=$lt_OBJDUMP @@ -17050,30 +17749,13 @@ # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method -# Command to use when deplibs_check_method = "file_magic". +# Command to use when deplibs_check_method == "file_magic". file_magic_cmd=$lt_file_magic_cmd -# How to find potential files when deplibs_check_method = "file_magic". -file_magic_glob=$lt_file_magic_glob - -# Find potential files using nocaseglob when deplibs_check_method = "file_magic". -want_nocaseglob=$lt_want_nocaseglob - -# DLL creation program. -DLLTOOL=$lt_DLLTOOL - -# Command to associate shared and link libraries. -sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd - # The archiver. AR=$lt_AR - -# Flags to create an archive. AR_FLAGS=$lt_AR_FLAGS -# How to feed a file listing to the archiver. -archiver_list_spec=$lt_archiver_list_spec - # A symbol stripping program. STRIP=$lt_STRIP @@ -17082,9 +17764,6 @@ old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds -# Whether to use a lock for old archive extraction. -lock_old_archive_extraction=$lock_old_archive_extraction - # A C compiler. LTCC=$lt_CC @@ -17103,24 +17782,21 @@ # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix -# Specify filename containing input files for \$NM. -nm_file_list_spec=$lt_nm_file_list_spec - -# The root where to search for dependent libraries,and in which our libraries should be installed. -lt_sysroot=$lt_sysroot - # The name of the directory that contains temporary libtool files. objdir=$objdir +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that does not interpret backslashes. +ECHO=$lt_ECHO + # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks -# Manifest tool. -MANIFEST_TOOL=$lt_MANIFEST_TOOL - # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL @@ -17177,9 +17853,6 @@ # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec -# Permission mode override for installation of shared libraries. -install_override_mode=$lt_install_override_mode - # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds @@ -17219,10 +17892,6 @@ # The linker used to build libraries. LD=$lt_LD -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds @@ -17235,12 +17904,12 @@ # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static @@ -17327,6 +17996,9 @@ # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path + # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols @@ -17342,9 +18014,6 @@ # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds - # Specify filename containing input files. file_list_spec=$lt_file_list_spec @@ -17391,169 +18060,212 @@ # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} + +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} + +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $* )) +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} + +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; + esac +} + +# sed scripts: +my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[^=]*=//' + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` +} + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$@"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF +esac + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1+=\$2" +} +_LT_EOF + ;; + *) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1=\$$1\$2" +} + +_LT_EOF + ;; + esac - if test x"$xsi_shell" = xyes; then - sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ -func_dirname ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_basename ()$/,/^} # func_basename /c\ -func_basename ()\ -{\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ -func_dirname_and_basename ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ -func_stripname ()\ -{\ -\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ -\ # positional parameters, so assign one to ordinary parameter first.\ -\ func_stripname_result=${3}\ -\ func_stripname_result=${func_stripname_result#"${1}"}\ -\ func_stripname_result=${func_stripname_result%"${2}"}\ -} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ -func_split_long_opt ()\ -{\ -\ func_split_long_opt_name=${1%%=*}\ -\ func_split_long_opt_arg=${1#*=}\ -} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ -func_split_short_opt ()\ -{\ -\ func_split_short_opt_arg=${1#??}\ -\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ -} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ -func_lo2o ()\ -{\ -\ case ${1} in\ -\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ -\ *) func_lo2o_result=${1} ;;\ -\ esac\ -} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_xform ()$/,/^} # func_xform /c\ -func_xform ()\ -{\ - func_xform_result=${1%.*}.lo\ -} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_arith ()$/,/^} # func_arith /c\ -func_arith ()\ -{\ - func_arith_result=$(( $* ))\ -} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_len ()$/,/^} # func_len /c\ -func_len ()\ -{\ - func_len_result=${#1}\ -} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - -fi - -if test x"$lt_shell_append" = xyes; then - sed -e '/^func_append ()$/,/^} # func_append /c\ -func_append ()\ -{\ - eval "${1}+=\\${2}"\ -} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ -func_append_quoted ()\ -{\ -\ func_quote_for_eval "${2}"\ -\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ -} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 -$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} -fi + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) - mv -f "$cfgfile" "$ofile" || + mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" @@ -17565,10 +18277,6 @@ # The linker used to build libraries. LD=$lt_LD_CXX -# How to create reloadable object files. -reload_flag=$lt_reload_flag_CXX -reload_cmds=$lt_reload_cmds_CXX - # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds_CXX @@ -17581,12 +18289,12 @@ # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_CXX - # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_CXX +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_CXX + # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_CXX @@ -17673,6 +18381,9 @@ # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_CXX +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path_CXX + # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols_CXX @@ -17688,9 +18399,6 @@ # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds_CXX -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds_CXX - # Specify filename containing input files. file_list_spec=$lt_file_list_spec_CXX @@ -17720,12 +18428,15 @@ done # for ac_tag -as_fn_exit 0 +{ (exit 0); exit 0; } _ACEOF +chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } # configure is writing to config.log, and then calls config.status. @@ -17746,10 +18457,10 @@ exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 + $ac_cs_success || { (exit 1); exit 1; } fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 + { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/configure.ac fastjet-3.0.6+dfsg/plugins/SISCone/siscone/configure.ac --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/configure.ac 2012-06-13 14:15:01.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/configure.ac 2013-10-28 16:15:28.000000000 +0000 @@ -1,12 +1,12 @@ -AC_INIT([SISCone], [2.0.5]) +AC_INIT([SISCone], [2.0.6]) AC_CONFIG_SRCDIR([siscone/siscone.cpp]) AM_INIT_AUTOMAKE dnl uncomment the following line if you want to use autoheader -AM_CONFIG_HEADER(siscone/config.h:config.h.in) +AC_CONFIG_HEADERS(siscone/config.h:config.h.in) dnl and also uncomment the call to autoheader in autogen.sh dnl check autoconf version -AC_PREREQ(2.57) +AC_PREREQ(2.63) dnl check basic types AC_CHECK_TYPE(int) diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/examples/Makefile.in fastjet-3.0.6+dfsg/plugins/SISCone/siscone/examples/Makefile.in --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/examples/Makefile.in 2012-06-25 13:55:10.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/examples/Makefile.in 2013-10-28 16:16:23.000000000 +0000 @@ -163,7 +163,6 @@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -187,7 +186,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -200,7 +198,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -213,7 +210,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -247,6 +243,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/examples/events/Makefile.in fastjet-3.0.6+dfsg/plugins/SISCone/siscone/examples/events/Makefile.in --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/examples/events/Makefile.in 2012-06-25 13:55:10.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/examples/events/Makefile.in 2013-10-28 16:16:23.000000000 +0000 @@ -65,7 +65,6 @@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -89,7 +88,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -102,7 +100,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -115,7 +112,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -149,6 +145,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/ltmain.sh fastjet-3.0.6+dfsg/plugins/SISCone/siscone/ltmain.sh --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/ltmain.sh 2012-06-25 13:55:08.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/ltmain.sh 2013-04-06 16:44:29.000000000 +0000 @@ -1,9 +1,9 @@ +# Generated from ltmain.m4sh. -# libtool (GNU libtool) 2.4 +# ltmain.sh (GNU libtool) 2.2.6b # Written by Gordon Matzigkeit , 1996 -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, -# 2007, 2008, 2009, 2010 Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. @@ -32,56 +32,50 @@ # # Provide generalized library-building support services. # -# --config show all configuration variables -# --debug enable verbose shell tracing -# -n, --dry-run display commands without modifying any files -# --features display basic configuration information and exit -# --mode=MODE use operation mode MODE -# --preserve-dup-deps don't remove duplicate dependency libraries -# --quiet, --silent don't print informational messages -# --no-quiet, --no-silent -# print informational messages (default) -# --tag=TAG use configuration variables from tag TAG -# -v, --verbose print more informational messages than default -# --no-verbose don't print the extra informational messages -# --version print version information -# -h, --help, --help-all print short, long, or detailed help message +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print informational messages (default) +# --version print version information +# -h, --help print short or long help message # # MODE must be one of the following: # -# clean remove files from the build directory -# compile compile a source file into a libtool object -# execute automatically set library path, then run a program -# finish complete the installation of libtool libraries -# install install libraries or executables -# link create a library or an executable -# uninstall remove libraries from an installed directory +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory # -# MODE-ARGS vary depending on the MODE. When passed as first option, -# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# MODE-ARGS vary depending on the MODE. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # -# host-triplet: $host -# shell: $SHELL -# compiler: $LTCC -# compiler flags: $LTCFLAGS -# linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.4 -# automake: $automake_version -# autoconf: $autoconf_version +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.2.6b +# automake: $automake_version +# autoconf: $autoconf_version # # Report bugs to . -# GNU libtool home page: . -# General help using GNU software: . -PROGRAM=libtool +PROGRAM=ltmain.sh PACKAGE=libtool -VERSION=2.4 +VERSION=2.2.6b TIMESTAMP="" -package_revision=1.3293 +package_revision=1.3017 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then @@ -97,15 +91,10 @@ BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' -} - # NLS nuisances: We save the old values to restore during execute mode. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES @@ -118,24 +107,15 @@ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done -LC_ALL=C -LANGUAGE=C -export LANGUAGE LC_ALL $lt_unset CDPATH -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" : ${CP="cp -f"} -test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${ECHO="echo"} : ${EGREP="/bin/grep -E"} : ${FGREP="/bin/grep -F"} : ${GREP="/bin/grep"} @@ -164,27 +144,6 @@ dirname="s,/[^/]*$,," basename="s,^.*/,," -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} # func_dirname may be replaced by extended shell implementation - - -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "${1}" | $SED "$basename"` -} # func_basename may be replaced by extended shell implementation - - # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: @@ -199,183 +158,33 @@ # those functions but instead duplicate the functionality here. func_dirname_and_basename () { - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi - func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` -} # func_dirname_and_basename may be replaced by extended shell implementation - - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname may be replaced by extended shell implementation - - -# These SED scripts presuppose an absolute path with a trailing slash. -pathcar='s,^/\([^/]*\).*$,\1,' -pathcdr='s,^/[^/]*,,' -removedotparts=':dotsl - s@/\./@/@g - t dotsl - s,/\.$,/,' -collapseslashes='s@/\{1,\}@/@g' -finalslash='s,/*$,/,' - -# func_normal_abspath PATH -# Remove doubled-up and trailing slashes, "." path components, -# and cancel out any ".." path components in PATH after making -# it an absolute path. -# value returned in "$func_normal_abspath_result" -func_normal_abspath () -{ - # Start from root dir and reassemble the path. - func_normal_abspath_result= - func_normal_abspath_tpath=$1 - func_normal_abspath_altnamespace= - case $func_normal_abspath_tpath in - "") - # Empty path, that just means $cwd. - func_stripname '' '/' "`pwd`" - func_normal_abspath_result=$func_stripname_result - return - ;; - # The next three entries are used to spot a run of precisely - # two leading slashes without using negated character classes; - # we take advantage of case's first-match behaviour. - ///*) - # Unusual form of absolute path, do nothing. - ;; - //*) - # Not necessarily an ordinary path; POSIX reserves leading '//' - # and for example Cygwin uses it to access remote file shares - # over CIFS/SMB, so we conserve a leading double slash if found. - func_normal_abspath_altnamespace=/ - ;; - /*) - # Absolute path, do nothing. - ;; - *) - # Relative path, prepend $cwd. - func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath - ;; - esac - # Cancel out all the simple stuff to save iterations. We also want - # the path to end with a slash for ease of parsing, so make sure - # there is one (and only one) here. - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` - while :; do - # Processed it all yet? - if test "$func_normal_abspath_tpath" = / ; then - # If we ascended to the root using ".." the result may be empty now. - if test -z "$func_normal_abspath_result" ; then - func_normal_abspath_result=/ - fi - break - fi - func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcar"` - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcdr"` - # Figure out what to do with it - case $func_normal_abspath_tcomponent in - "") - # Trailing empty path component, ignore it. - ;; - ..) - # Parent dir; strip last assembled component from result. - func_dirname "$func_normal_abspath_result" - func_normal_abspath_result=$func_dirname_result - ;; - *) - # Actual path component, append it. - func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent - ;; - esac - done - # Restore leading double-slash if one was found on entry. - func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` } -# func_relative_path SRCDIR DSTDIR -# generates a relative path from SRCDIR to DSTDIR, with a trailing -# slash if non-empty, suitable for immediately appending a filename -# without needing to append a separator. -# value returned in "$func_relative_path_result" -func_relative_path () -{ - func_relative_path_result= - func_normal_abspath "$1" - func_relative_path_tlibdir=$func_normal_abspath_result - func_normal_abspath "$2" - func_relative_path_tbindir=$func_normal_abspath_result - - # Ascend the tree starting from libdir - while :; do - # check if we have found a prefix of bindir - case $func_relative_path_tbindir in - $func_relative_path_tlibdir) - # found an exact match - func_relative_path_tcancelled= - break - ;; - $func_relative_path_tlibdir*) - # found a matching prefix - func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" - func_relative_path_tcancelled=$func_stripname_result - if test -z "$func_relative_path_result"; then - func_relative_path_result=. - fi - break - ;; - *) - func_dirname $func_relative_path_tlibdir - func_relative_path_tlibdir=${func_dirname_result} - if test "x$func_relative_path_tlibdir" = x ; then - # Have to descend all the way to the root! - func_relative_path_result=../$func_relative_path_result - func_relative_path_tcancelled=$func_relative_path_tbindir - break - fi - func_relative_path_result=../$func_relative_path_result - ;; - esac - done - - # Now calculate path; take care to avoid doubling-up slashes. - func_stripname '' '/' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - func_stripname '/' '/' "$func_relative_path_tcancelled" - if test "x$func_stripname_result" != x ; then - func_relative_path_result=${func_relative_path_result}/${func_stripname_result} - fi +# Generated shell functions inserted here. - # Normalisation. If bindir is libdir, return empty string, - # else relative path ending with a slash; either way, target - # file name can be directly appended. - if test ! -z "$func_relative_path_result"; then - func_stripname './' '' "$func_relative_path_result/" - func_relative_path_result=$func_stripname_result - fi -} +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" # The name of this program: +# In the unlikely event $progname began with a '-', it would play havoc with +# func_echo (imagine progname=-n), so we prepend ./ in that case: func_dirname_and_basename "$progpath" progname=$func_basename_result +case $progname in + -*) progname=./$progname ;; +esac # Make sure we have an absolute path for reexecution: case $progpath in @@ -406,15 +215,6 @@ # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' -# Sed substitution that turns a string into a regex matching for the -# string literally. -sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' - -# Sed substitution that converts a w32 file name or path -# which contains forward slashes, into one that contains -# (escaped) backslashes. A very naive implementation. -lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. @@ -443,7 +243,7 @@ # name if it has been set yet. func_echo () { - $ECHO "$progname: ${opt_mode+$opt_mode: }$*" + $ECHO "$progname${mode+: }$mode: $*" } # func_verbose arg... @@ -458,25 +258,18 @@ : } -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} - # func_error arg... # Echo program name prefixed message to standard error. func_error () { - $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 + $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { - $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 # bash bug again: : @@ -533,9 +326,9 @@ case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop - my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` done - my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do @@ -585,7 +378,7 @@ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi - $ECHO "$my_tmpdir" + $ECHO "X$my_tmpdir" | $Xsed } @@ -599,7 +392,7 @@ { case $1 in *[\\\`\"\$]*) - func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac @@ -626,7 +419,7 @@ { case $1 in *[\\\`\"]*) - my_arg=`$ECHO "$1" | $SED \ + my_arg=`$ECHO "X$1" | $Xsed \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; @@ -695,39 +488,15 @@ fi } -# func_tr_sh -# Turn $1 into a string suitable for a shell variable name. -# Result is stored in $func_tr_sh_result. All characters -# not in the set a-zA-Z0-9_ are replaced with '_'. Further, -# if $1 begins with a digit, a '_' is prepended as well. -func_tr_sh () -{ - case $1 in - [0-9]* | *[!a-zA-Z0-9_]*) - func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` - ;; - * ) - func_tr_sh_result=$1 - ;; - esac -} + + # func_version # Echo version message to standard output and exit. func_version () { - $opt_debug - - $SED -n '/(C)/!b go - :more - /\./!{ - N - s/\n# / / - b more - } - :go - /^# '$PROGRAM' (GNU /,/# warranty; / { + $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ @@ -740,28 +509,22 @@ # Echo short help message to standard output and exit. func_usage () { - $opt_debug - - $SED -n '/^# Usage:/,/^# *.*--help/ { + $SED -n '/^# Usage:/,/# -h/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" - echo + $ECHO $ECHO "run \`$progname --help | more' for full usage" exit $? } -# func_help [NOEXIT] -# Echo long help message to standard output and exit, -# unless 'noexit' is passed as argument. +# func_help +# Echo long help message to standard output and exit. func_help () { - $opt_debug - $SED -n '/^# Usage:/,/# Report bugs to/ { - :print s/^# // s/^# *$// s*\$progname*'$progname'* @@ -774,15 +537,8 @@ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ p - d - } - /^# .* home page:/b print - /^# General help using/b print - ' < "$progpath" - ret=$? - if test -z "$1"; then - exit $ret - fi + }' < "$progpath" + exit $? } # func_missing_arg argname @@ -790,106 +546,63 @@ # exit_cmd. func_missing_arg () { - $opt_debug - - func_error "missing argument for $1." + func_error "missing argument for $1" exit_cmd=exit } +exit_cmd=: -# func_split_short_opt shortopt -# Set func_split_short_opt_name and func_split_short_opt_arg shell -# variables after splitting SHORTOPT after the 2nd character. -func_split_short_opt () -{ - my_sed_short_opt='1s/^\(..\).*$/\1/;q' - my_sed_short_rest='1s/^..\(.*\)$/\1/;q' - - func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` - func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` -} # func_split_short_opt may be replaced by extended shell implementation - - -# func_split_long_opt longopt -# Set func_split_long_opt_name and func_split_long_opt_arg shell -# variables after splitting LONGOPT at the `=' sign. -func_split_long_opt () -{ - my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' - my_sed_long_arg='1s/^--[^=]*=//' - - func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` - func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` -} # func_split_long_opt may be replaced by extended shell implementation -exit_cmd=: +# Check that we have a working $ECHO. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then + # Yippee, $ECHO works! + : +else + # Restart under the correct shell, and then maybe $ECHO will work. + exec $SHELL "$progpath" --no-reexec ${1+"$@"} +fi +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null || echo $max_cmd_len` -} # func_len may be replaced by extended shell implementation - - -# func_lo2o object -func_lo2o () -{ - func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` -} # func_lo2o may be replaced by extended shell implementation - - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` -} # func_xform may be replaced by extended shell implementation - - # func_fatal_configuration arg... # Echo program name prefixed message to standard error, followed by # a configuration failure hint, and exit. @@ -923,16 +636,16 @@ # Display the features supported by this script. func_features () { - echo "host: $host" + $ECHO "host: $host" if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" + $ECHO "enable shared libraries" else - echo "disable shared libraries" + $ECHO "disable shared libraries" fi if test "$build_old_libs" = yes; then - echo "enable static libraries" + $ECHO "enable static libraries" else - echo "disable static libraries" + $ECHO "disable static libraries" fi exit $? @@ -979,204 +692,117 @@ esac } -# func_check_version_match -# Ensure that we are using m4 macros, and libtool script from the same -# release of libtool. -func_check_version_match () +# Parse options once, thoroughly. This comes as soon as possible in +# the script to make things like `libtool --version' happen quickly. { - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from an older release. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - fi - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -$progname: but the definition of this LT_INIT comes from revision $macro_revision. -$progname: You should recreate aclocal.m4 with macros from revision $package_revision -$progname: of $PACKAGE $VERSION and run autoconf again. -_LT_EOF - fi - - exit $EXIT_MISMATCH - fi -} - - -# Shorthand for --mode=foo, only valid as the first argument -case $1 in -clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; -compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; -execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; -finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; -install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; -link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; -uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; -esac - - - -# Option defaults: -opt_debug=: -opt_dry_run=false -opt_config=false -opt_preserve_dup_deps=false -opt_features=false -opt_finish=false -opt_help=false -opt_help_all=false -opt_silent=: -opt_verbose=: -opt_silent=false -opt_verbose=false + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac -# Parse options once, thoroughly. This comes as soon as possible in the -# script to make things like `--version' happen as quickly as we can. -{ - # this just eases exit handling - while test $# -gt 0; do + # Parse non-mode specific arguments: + while test "$#" -gt 0; do opt="$1" shift + case $opt in - --debug|-x) opt_debug='set -x' + --config) func_config ;; + + --debug) preserve_args="$preserve_args $opt" func_echo "enabling shell trace mode" + opt_debug='set -x' $opt_debug ;; - --dry-run|--dryrun|-n) - opt_dry_run=: - ;; - --config) - opt_config=: -func_config - ;; - --dlopen|-dlopen) - optarg="$1" - opt_dlopen="${opt_dlopen+$opt_dlopen -}$optarg" + + -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break + execute_dlfiles="$execute_dlfiles $1" shift ;; - --preserve-dup-deps) - opt_preserve_dup_deps=: - ;; - --features) - opt_features=: -func_features - ;; - --finish) - opt_finish=: -set dummy --mode finish ${1+"$@"}; shift - ;; - --help) - opt_help=: - ;; - --help-all) - opt_help_all=: -opt_help=': help-all' - ;; - --mode) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_mode="$optarg" -case $optarg in - # Valid mode arguments: - clean|compile|execute|finish|install|link|relink|uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $opt" - exit_cmd=exit - break - ;; -esac + + --dry-run | -n) opt_dry_run=: ;; + --features) func_features ;; + --finish) mode="finish" ;; + + --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break + case $1 in + # Valid mode arguments: + clean) ;; + compile) ;; + execute) ;; + finish) ;; + install) ;; + link) ;; + relink) ;; + uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; + esac + + mode="$1" shift ;; - --no-silent|--no-quiet) - opt_silent=false -func_append preserve_args " $opt" - ;; - --no-verbose) - opt_verbose=false -func_append preserve_args " $opt" - ;; - --silent|--quiet) + + --preserve-dup-deps) + opt_duplicate_deps=: ;; + + --quiet|--silent) preserve_args="$preserve_args $opt" opt_silent=: -func_append preserve_args " $opt" - opt_verbose=false ;; - --verbose|-v) - opt_verbose=: -func_append preserve_args " $opt" -opt_silent=false + + --verbose| -v) preserve_args="$preserve_args $opt" + opt_silent=false ;; - --tag) - test $# = 0 && func_missing_arg $opt && break - optarg="$1" - opt_tag="$optarg" -func_append preserve_args " $opt $optarg" -func_enable_tag "$optarg" + + --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break + preserve_args="$preserve_args $opt $1" + func_enable_tag "$1" # tagname is set here shift ;; - -\?|-h) func_usage ;; - --help) func_help ;; - --version) func_version ;; - # Separate optargs to long options: - --*=*) - func_split_long_opt "$opt" - set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} + -dlopen=*|--mode=*|--tag=*) + func_opt_split "$opt" + set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} shift ;; - # Separate non-argument short options: - -\?*|-h*|-n*|-v*) - func_split_short_opt "$opt" - set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} - shift - ;; + -\?|-h) func_usage ;; + --help) opt_help=: ;; + --version) func_version ;; + + -*) func_fatal_help "unrecognized option \`$opt'" ;; - --) break ;; - -*) func_fatal_help "unrecognized option \`$opt'" ;; - *) set dummy "$opt" ${1+"$@"}; shift; break ;; + *) nonopt="$opt" + break + ;; esac done - # Validate options: - - # save first non-option argument - if test "$#" -gt 0; then - nonopt="$opt" - shift - fi - - # preserve --debug - test "$opt_debug" = : || func_append preserve_args " --debug" case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) @@ -1184,44 +810,82 @@ opt_duplicate_compiler_generated_deps=: ;; *) - opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + opt_duplicate_compiler_generated_deps=$opt_duplicate_deps ;; esac - $opt_help || { - # Sanity checks first: - func_check_version_match + # Having warned about all mis-specified options, bail out if + # anything was wrong. + $exit_cmd $EXIT_FAILURE +} - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - func_fatal_configuration "not configured to build any kind of library" +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF fi - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" + exit $EXIT_MISMATCH + fi +} - # Only execute mode is allowed to have -dlopen flags. - if test -n "$opt_dlopen" && test "$opt_mode" != execute; then - func_error "unrecognized option \`-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE - fi - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$progname --help --mode=$opt_mode' for more information." - } +## ----------- ## +## Main. ## +## ----------- ## +$opt_help || { + # Sanity checks first: + func_check_version_match - # Bail if the options were screwed - $exit_cmd $EXIT_FAILURE -} + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + test -z "$mode" && func_fatal_error "error: you must specify a MODE." + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$mode' for more information." +} -## ----------- ## -## Main. ## -## ----------- ## # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. @@ -1286,9 +950,12 @@ # temporary ltwrapper_script. func_ltwrapper_scriptname () { - func_dirname_and_basename "$1" "" "." - func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + func_ltwrapper_scriptname_result="" + if func_ltwrapper_executable_p "$1"; then + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + fi } # func_ltwrapper_p file @@ -1334,37 +1001,6 @@ } -# func_resolve_sysroot PATH -# Replace a leading = in PATH with a sysroot. Store the result into -# func_resolve_sysroot_result -func_resolve_sysroot () -{ - func_resolve_sysroot_result=$1 - case $func_resolve_sysroot_result in - =*) - func_stripname '=' '' "$func_resolve_sysroot_result" - func_resolve_sysroot_result=$lt_sysroot$func_stripname_result - ;; - esac -} - -# func_replace_sysroot PATH -# If PATH begins with the sysroot, replace it with = and -# store the result into func_replace_sysroot_result. -func_replace_sysroot () -{ - case "$lt_sysroot:$1" in - ?*:"$lt_sysroot"*) - func_stripname "$lt_sysroot" '' "$1" - func_replace_sysroot_result="=$func_stripname_result" - ;; - *) - # Including no sysroot. - func_replace_sysroot_result=$1 - ;; - esac -} - # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. @@ -1377,15 +1013,13 @@ if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do - func_append_quoted CC_quoted "$arg" + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) @@ -1396,13 +1030,11 @@ CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. - func_append_quoted CC_quoted "$arg" + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. @@ -1465,486 +1097,6 @@ } } - -################################################## -# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS # -################################################## - -# func_convert_core_file_wine_to_w32 ARG -# Helper function used by file name conversion functions when $build is *nix, -# and $host is mingw, cygwin, or some other w32 environment. Relies on a -# correctly configured wine environment available, with the winepath program -# in $build's $PATH. -# -# ARG is the $build file name to be converted to w32 format. -# Result is available in $func_convert_core_file_wine_to_w32_result, and will -# be empty on error (or when ARG is empty) -func_convert_core_file_wine_to_w32 () -{ - $opt_debug - func_convert_core_file_wine_to_w32_result="$1" - if test -n "$1"; then - # Unfortunately, winepath does not exit with a non-zero error code, so we - # are forced to check the contents of stdout. On the other hand, if the - # command is not found, the shell will set an exit code of 127 and print - # *an error message* to stdout. So we must check for both error code of - # zero AND non-empty stdout, which explains the odd construction: - func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null` - if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then - func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | - $SED -e "$lt_sed_naive_backslashify"` - else - func_convert_core_file_wine_to_w32_result= - fi - fi -} -# end: func_convert_core_file_wine_to_w32 - - -# func_convert_core_path_wine_to_w32 ARG -# Helper function used by path conversion functions when $build is *nix, and -# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly -# configured wine environment available, with the winepath program in $build's -# $PATH. Assumes ARG has no leading or trailing path separator characters. -# -# ARG is path to be converted from $build format to win32. -# Result is available in $func_convert_core_path_wine_to_w32_result. -# Unconvertible file (directory) names in ARG are skipped; if no directory names -# are convertible, then the result may be empty. -func_convert_core_path_wine_to_w32 () -{ - $opt_debug - # unfortunately, winepath doesn't convert paths, only file names - func_convert_core_path_wine_to_w32_result="" - if test -n "$1"; then - oldIFS=$IFS - IFS=: - for func_convert_core_path_wine_to_w32_f in $1; do - IFS=$oldIFS - func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" - if test -n "$func_convert_core_file_wine_to_w32_result" ; then - if test -z "$func_convert_core_path_wine_to_w32_result"; then - func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" - else - func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" - fi - fi - done - IFS=$oldIFS - fi -} -# end: func_convert_core_path_wine_to_w32 - - -# func_cygpath ARGS... -# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when -# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) -# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or -# (2), returns the Cygwin file name or path in func_cygpath_result (input -# file name or path is assumed to be in w32 format, as previously converted -# from $build's *nix or MSYS format). In case (3), returns the w32 file name -# or path in func_cygpath_result (input file name or path is assumed to be in -# Cygwin format). Returns an empty string on error. -# -# ARGS are passed to cygpath, with the last one being the file name or path to -# be converted. -# -# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH -# environment variable; do not put it in $PATH. -func_cygpath () -{ - $opt_debug - if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then - func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` - if test "$?" -ne 0; then - # on failure, ensure result is empty - func_cygpath_result= - fi - else - func_cygpath_result= - func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" - fi -} -#end: func_cygpath - - -# func_convert_core_msys_to_w32 ARG -# Convert file name or path ARG from MSYS format to w32 format. Return -# result in func_convert_core_msys_to_w32_result. -func_convert_core_msys_to_w32 () -{ - $opt_debug - # awkward: cmd appends spaces to result - func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | - $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` -} -#end: func_convert_core_msys_to_w32 - - -# func_convert_file_check ARG1 ARG2 -# Verify that ARG1 (a file name in $build format) was converted to $host -# format in ARG2. Otherwise, emit an error message, but continue (resetting -# func_to_host_file_result to ARG1). -func_convert_file_check () -{ - $opt_debug - if test -z "$2" && test -n "$1" ; then - func_error "Could not determine host file name corresponding to" - func_error " \`$1'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback: - func_to_host_file_result="$1" - fi -} -# end func_convert_file_check - - -# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH -# Verify that FROM_PATH (a path in $build format) was converted to $host -# format in TO_PATH. Otherwise, emit an error message, but continue, resetting -# func_to_host_file_result to a simplistic fallback value (see below). -func_convert_path_check () -{ - $opt_debug - if test -z "$4" && test -n "$3"; then - func_error "Could not determine the host path corresponding to" - func_error " \`$3'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback. This is a deliberately simplistic "conversion" and - # should not be "improved". See libtool.info. - if test "x$1" != "x$2"; then - lt_replace_pathsep_chars="s|$1|$2|g" - func_to_host_path_result=`echo "$3" | - $SED -e "$lt_replace_pathsep_chars"` - else - func_to_host_path_result="$3" - fi - fi -} -# end func_convert_path_check - - -# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG -# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT -# and appending REPL if ORIG matches BACKPAT. -func_convert_path_front_back_pathsep () -{ - $opt_debug - case $4 in - $1 ) func_to_host_path_result="$3$func_to_host_path_result" - ;; - esac - case $4 in - $2 ) func_append func_to_host_path_result "$3" - ;; - esac -} -# end func_convert_path_front_back_pathsep - - -################################################## -# $build to $host FILE NAME CONVERSION FUNCTIONS # -################################################## -# invoked via `$to_host_file_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# Result will be available in $func_to_host_file_result. - - -# func_to_host_file ARG -# Converts the file name ARG from $build format to $host format. Return result -# in func_to_host_file_result. -func_to_host_file () -{ - $opt_debug - $to_host_file_cmd "$1" -} -# end func_to_host_file - - -# func_to_tool_file ARG LAZY -# converts the file name ARG from $build format to toolchain format. Return -# result in func_to_tool_file_result. If the conversion in use is listed -# in (the comma separated) LAZY, no conversion takes place. -func_to_tool_file () -{ - $opt_debug - case ,$2, in - *,"$to_tool_file_cmd",*) - func_to_tool_file_result=$1 - ;; - *) - $to_tool_file_cmd "$1" - func_to_tool_file_result=$func_to_host_file_result - ;; - esac -} -# end func_to_tool_file - - -# func_convert_file_noop ARG -# Copy ARG to func_to_host_file_result. -func_convert_file_noop () -{ - func_to_host_file_result="$1" -} -# end func_convert_file_noop - - -# func_convert_file_msys_to_w32 ARG -# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_file_result. -func_convert_file_msys_to_w32 () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_to_host_file_result="$func_convert_core_msys_to_w32_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_w32 - - -# func_convert_file_cygwin_to_w32 ARG -# Convert file name ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_file_cygwin_to_w32 () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - # because $build is cygwin, we call "the" cygpath in $PATH; no need to use - # LT_CYGPATH in this case. - func_to_host_file_result=`cygpath -m "$1"` - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_cygwin_to_w32 - - -# func_convert_file_nix_to_w32 ARG -# Convert file name ARG from *nix to w32 format. Requires a wine environment -# and a working winepath. Returns result in func_to_host_file_result. -func_convert_file_nix_to_w32 () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - func_convert_core_file_wine_to_w32 "$1" - func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_w32 - - -# func_convert_file_msys_to_cygwin ARG -# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_file_msys_to_cygwin () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_cygpath -u "$func_convert_core_msys_to_w32_result" - func_to_host_file_result="$func_cygpath_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_cygwin - - -# func_convert_file_nix_to_cygwin ARG -# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed -# in a wine environment, working winepath, and LT_CYGPATH set. Returns result -# in func_to_host_file_result. -func_convert_file_nix_to_cygwin () -{ - $opt_debug - func_to_host_file_result="$1" - if test -n "$1"; then - # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. - func_convert_core_file_wine_to_w32 "$1" - func_cygpath -u "$func_convert_core_file_wine_to_w32_result" - func_to_host_file_result="$func_cygpath_result" - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_cygwin - - -############################################# -# $build to $host PATH CONVERSION FUNCTIONS # -############################################# -# invoked via `$to_host_path_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# The result will be available in $func_to_host_path_result. -# -# Path separators are also converted from $build format to $host format. If -# ARG begins or ends with a path separator character, it is preserved (but -# converted to $host format) on output. -# -# All path conversion functions are named using the following convention: -# file name conversion function : func_convert_file_X_to_Y () -# path conversion function : func_convert_path_X_to_Y () -# where, for any given $build/$host combination the 'X_to_Y' value is the -# same. If conversion functions are added for new $build/$host combinations, -# the two new functions must follow this pattern, or func_init_to_host_path_cmd -# will break. - - -# func_init_to_host_path_cmd -# Ensures that function "pointer" variable $to_host_path_cmd is set to the -# appropriate value, based on the value of $to_host_file_cmd. -to_host_path_cmd= -func_init_to_host_path_cmd () -{ - $opt_debug - if test -z "$to_host_path_cmd"; then - func_stripname 'func_convert_file_' '' "$to_host_file_cmd" - to_host_path_cmd="func_convert_path_${func_stripname_result}" - fi -} - - -# func_to_host_path ARG -# Converts the path ARG from $build format to $host format. Return result -# in func_to_host_path_result. -func_to_host_path () -{ - $opt_debug - func_init_to_host_path_cmd - $to_host_path_cmd "$1" -} -# end func_to_host_path - - -# func_convert_path_noop ARG -# Copy ARG to func_to_host_path_result. -func_convert_path_noop () -{ - func_to_host_path_result="$1" -} -# end func_convert_path_noop - - -# func_convert_path_msys_to_w32 ARG -# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_path_result. -func_convert_path_msys_to_w32 () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # Remove leading and trailing path separator characters from ARG. MSYS - # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; - # and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_msys_to_w32_result" - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_msys_to_w32 - - -# func_convert_path_cygwin_to_w32 ARG -# Convert path ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_path_cygwin_to_w32 () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_cygwin_to_w32 - - -# func_convert_path_nix_to_w32 ARG -# Convert path ARG from *nix to w32 format. Requires a wine environment and -# a working winepath. Returns result in func_to_host_file_result. -func_convert_path_nix_to_w32 () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_nix_to_w32 - - -# func_convert_path_msys_to_cygwin ARG -# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_path_msys_to_cygwin () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_msys_to_w32_result" - func_to_host_path_result="$func_cygpath_result" - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi -} -# end func_convert_path_msys_to_cygwin - - -# func_convert_path_nix_to_cygwin ARG -# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a -# a wine environment, working winepath, and LT_CYGPATH set. Returns result in -# func_to_host_file_result. -func_convert_path_nix_to_cygwin () -{ - $opt_debug - func_to_host_path_result="$1" - if test -n "$1"; then - # Remove leading and trailing path separator characters from - # ARG. msys behavior is inconsistent here, cygpath turns them - # into '.;' and ';.', and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" - func_to_host_path_result="$func_cygpath_result" - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi -} -# end func_convert_path_nix_to_cygwin - - # func_mode_compile arg... func_mode_compile () { @@ -1985,12 +1137,12 @@ ;; -pie | -fpie | -fPIE) - func_append pie_flag " $arg" + pie_flag="$pie_flag $arg" continue ;; -shared | -static | -prefer-pic | -prefer-non-pic) - func_append later " $arg" + later="$later $arg" continue ;; @@ -2011,14 +1163,15 @@ save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" - func_append_quoted lastarg "$arg" + func_quote_for_eval "$arg" + lastarg="$lastarg $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$lastarg" lastarg=$func_stripname_result # Add the arguments to base_compile. - func_append base_compile " $lastarg" + base_compile="$base_compile $lastarg" continue ;; @@ -2034,7 +1187,8 @@ esac # case $arg_mode # Aesthetically quote the previous argument. - func_append_quoted base_compile "$lastarg" + func_quote_for_eval "$lastarg" + base_compile="$base_compile $func_quote_for_eval_result" done # for arg case $arg_mode in @@ -2059,7 +1213,7 @@ *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ - *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup) + *.[fF][09]? | *.for | *.java | *.obj | *.sx) func_xform "$libobj" libobj=$func_xform_result ;; @@ -2134,7 +1288,7 @@ # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then - output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} + output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= @@ -2165,16 +1319,17 @@ $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi - func_append removelist " $output_obj" + removelist="$removelist $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist - func_append removelist " $lockfile" + removelist="$removelist $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 - srcfile=$func_to_tool_file_result + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result @@ -2194,7 +1349,7 @@ if test -z "$output_obj"; then # Place PIC objects in $objdir - func_append command " -o $lobj" + command="$command -o $lobj" fi func_show_eval_locale "$command" \ @@ -2241,11 +1396,11 @@ command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then - func_append command " -o $obj" + command="$command -o $obj" fi # Suppress compiler output if we already did a PIC compilation. - func_append command "$suppress_output" + command="$command$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' @@ -2290,13 +1445,13 @@ } $opt_help || { - test "$opt_mode" = compile && func_mode_compile ${1+"$@"} +test "$mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. - case $opt_mode in + case $mode in "") # Generic help is extracted from the usage comments # at the start of this file. @@ -2327,11 +1482,10 @@ -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes - -prefer-pic try to build PIC objects only - -prefer-non-pic try to build non-PIC objects only + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking - -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. @@ -2384,7 +1538,7 @@ The following components of INSTALL-COMMAND are treated specially: - -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." @@ -2404,8 +1558,6 @@ -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible - -bindir BINDIR specify path to binaries directory (for systems where - libraries must be found in the PATH setting at runtime) -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) @@ -2434,11 +1586,6 @@ -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface - -Wc,FLAG - -Xcompiler FLAG pass linker-specific FLAG directly to the compiler - -Wl,FLAG - -Xlinker FLAG pass linker-specific FLAG directly to the linker - -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) All other options (arguments beginning with \`-') are ignored. @@ -2472,44 +1619,18 @@ ;; *) - func_fatal_help "invalid operation mode \`$opt_mode'" + func_fatal_help "invalid operation mode \`$mode'" ;; esac - echo + $ECHO $ECHO "Try \`$progname --help' for more information about other modes." + + exit $? } -# Now that we've collected a possible --mode arg, show help if necessary -if $opt_help; then - if test "$opt_help" = :; then - func_mode_help - else - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - func_mode_help - done - } | sed -n '1p; 2,$s/^Usage:/ or: /p' - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - echo - func_mode_help - done - } | - sed '1d - /^When reporting/,/^Report/{ - H - d - } - $x - /information about other modes/d - /more detailed .*MODE/d - s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' - fi - exit $? -fi + # Now that we've collected a possible --mode arg, show help if necessary + $opt_help && func_mode_help # func_mode_execute arg... @@ -2522,16 +1643,13 @@ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. - for file in $opt_dlopen; do + for file in $execute_dlfiles; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" @@ -2553,7 +1671,7 @@ dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then - func_append dir "/$objdir" + dir="$dir/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" @@ -2594,7 +1712,7 @@ for file do case $file in - -* | *.la | *.lo ) ;; + -*) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then @@ -2610,7 +1728,8 @@ ;; esac # Quote arguments (to preserve shell metacharacters). - func_append_quoted args "$file" + func_quote_for_eval "$file" + args="$args $func_quote_for_eval_result" done if test "X$opt_dry_run" = Xfalse; then @@ -2635,66 +1754,29 @@ # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - echo "export $shlibpath_var" + $ECHO "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi -} - -test "$opt_mode" = execute && func_mode_execute ${1+"$@"} - - -# func_mode_finish arg... -func_mode_finish () -{ - $opt_debug - libs= - libdirs= - admincmds= - - for opt in "$nonopt" ${1+"$@"} - do - if test -d "$opt"; then - func_append libdirs " $opt" - - elif test -f "$opt"; then - if func_lalib_unsafe_p "$opt"; then - func_append libs " $opt" - else - func_warning "\`$opt' is not a valid libtool archive" - fi +} - else - func_fatal_error "invalid argument \`$opt'" - fi - done +test "$mode" = execute && func_mode_execute ${1+"$@"} - if test -n "$libs"; then - if test -n "$lt_sysroot"; then - sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` - sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" - else - sysroot_cmd= - fi - # Remove sysroot references - if $opt_dry_run; then - for lib in $libs; do - echo "removing references to $lt_sysroot and \`=' prefixes from $lib" - done - else - tmpdir=`func_mktempdir` - for lib in $libs; do - sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ - > $tmpdir/tmp-la - mv -f $tmpdir/tmp-la $lib - done - ${RM}r "$tmpdir" - fi - fi +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libdirs="$nonopt" + admincmds= if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. @@ -2704,7 +1786,7 @@ if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" - $opt_dry_run || eval "$cmds" || func_append admincmds " + $opt_dry_run || eval "$cmds" || admincmds="$admincmds $cmds" fi done @@ -2713,55 +1795,53 @@ # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - $ECHO " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $ECHO " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $ECHO " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - echo + $ECHO "X----------------------------------------------------------------------" | $Xsed + $ECHO "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + $ECHO + $ECHO "If you ever happen to want to link against installed libraries" + $ECHO "in a given directory, LIBDIR, you must either use libtool, and" + $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" + $ECHO "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" + $ECHO " during execution" + fi + if test -n "$runpath_var"; then + $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" + $ECHO " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" - echo "See any operating system documentation about shared libraries for" - case $host in - solaris2.[6789]|solaris2.1[0-9]) - echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" - echo "pages." - ;; - *) - echo "more information, such as the ld(1) and ld.so(8) manual pages." - ;; - esac - echo "----------------------------------------------------------------------" + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi + $ECHO + + $ECHO "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" + $ECHO "pages." + ;; + *) + $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + $ECHO "X----------------------------------------------------------------------" | $Xsed exit $EXIT_SUCCESS } -test "$opt_mode" = finish && func_mode_finish ${1+"$@"} +test "$mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... @@ -2772,7 +1852,7 @@ # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. - case $nonopt in *shtool*) :;; *) false;; esac; then + $ECHO "X$nonopt" | $GREP shtool >/dev/null; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " @@ -2786,12 +1866,7 @@ # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" - func_append install_prog "$func_quote_for_eval_result" - install_shared_prog=$install_prog - case " $install_prog " in - *[\\\ /]cp\ *) install_cp=: ;; - *) install_cp=false ;; - esac + install_prog="$install_prog$func_quote_for_eval_result" # We need to accept at least all the BSD install flags. dest= @@ -2801,12 +1876,10 @@ install_type= isdir=no stripme= - no_mode=: for arg do - arg2= if test -n "$dest"; then - func_append files " $dest" + files="$files $dest" dest=$arg continue fi @@ -2814,9 +1887,10 @@ case $arg in -d) isdir=yes ;; -f) - if $install_cp; then :; else - prev=$arg - fi + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac ;; -g | -m | -o) prev=$arg @@ -2830,10 +1904,6 @@ *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then - if test "x$prev" = x-m && test -n "$install_override_mode"; then - arg2=$install_override_mode - no_mode=false - fi prev= else dest=$arg @@ -2844,11 +1914,7 @@ # Aesthetically quote the argument. func_quote_for_eval "$arg" - func_append install_prog " $func_quote_for_eval_result" - if test -n "$arg2"; then - func_quote_for_eval "$arg2" - fi - func_append install_shared_prog " $func_quote_for_eval_result" + install_prog="$install_prog $func_quote_for_eval_result" done test -z "$install_prog" && \ @@ -2857,13 +1923,6 @@ test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" - if test -n "$install_override_mode" && $no_mode; then - if $install_cp; then :; else - func_quote_for_eval "$install_override_mode" - func_append install_shared_prog " -m $func_quote_for_eval_result" - fi - fi - if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" @@ -2918,13 +1977,10 @@ case $file in *.$libext) # Do the static libraries later. - func_append staticlibs " $file" + staticlibs="$staticlibs $file" ;; *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" @@ -2938,23 +1994,23 @@ if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; - *) func_append current_libdirs " $libdir" ;; + *) current_libdirs="$current_libdirs $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; - *) func_append future_libdirs " $libdir" ;; + *) future_libdirs="$future_libdirs $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" - func_append dir "$objdir" + dir="$dir$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that @@ -2967,9 +2023,9 @@ if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" @@ -2987,7 +2043,7 @@ test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. - func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in @@ -3027,7 +2083,7 @@ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. - test -n "$old_library" && func_append staticlibs " $dir/$old_library" + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ;; *.lo) @@ -3127,7 +2183,7 @@ if test -f "$lib"; then func_source "$lib" fi - libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no @@ -3146,7 +2202,7 @@ file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. - relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" @@ -3165,7 +2221,7 @@ } else # Install the binary that we compiled earlier. - file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi @@ -3224,7 +2280,7 @@ fi } -test "$opt_mode" = install && func_mode_install ${1+"$@"} +test "$mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p @@ -3267,22 +2323,6 @@ extern \"C\" { #endif -#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) -#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" -#endif - -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - /* External symbol declarations for the compiler. */\ " @@ -3292,11 +2332,10 @@ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. - progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for progfile in $progfiles; do - func_to_tool_file "$progfile" func_convert_file_msys_to_w32 - func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" - $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + func_verbose "extracting global C symbols from \`$progfile'" + $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then @@ -3332,7 +2371,7 @@ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in - *cygwin* | *mingw* | *cegcc* ) + *cygwin | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; @@ -3345,52 +2384,10 @@ func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" - case $host in - *cygwin* | *mingw* | *cegcc* ) - # if an import library, we need to obtain dlname - if func_win32_import_lib_p "$dlprefile"; then - func_tr_sh "$dlprefile" - eval "curr_lafile=\$libfile_$func_tr_sh_result" - dlprefile_dlbasename="" - if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then - # Use subshell, to avoid clobbering current variable values - dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` - if test -n "$dlprefile_dlname" ; then - func_basename "$dlprefile_dlname" - dlprefile_dlbasename="$func_basename_result" - else - # no lafile. user explicitly requested -dlpreopen . - $sharedlib_from_linklib_cmd "$dlprefile" - dlprefile_dlbasename=$sharedlib_from_linklib_result - fi - fi - $opt_dry_run || { - if test -n "$dlprefile_dlbasename" ; then - eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' - else - func_warning "Could not compute DLL name from $name" - eval '$ECHO ": $name " >> "$nlist"' - fi - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | - $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" - } - else # not an import lib - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - fi - ;; - *) - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - ;; - esac + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } done $opt_dry_run || { @@ -3418,19 +2415,36 @@ if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else - echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" fi - echo >> "$output_objdir/$my_dlsyms" "\ + $ECHO >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; -extern LT_DLSYM_CONST lt_dlsymlist +" + case $host in + *cygwin* | *mingw* | *cegcc* ) + $ECHO >> "$output_objdir/$my_dlsyms" "\ +/* DATA imports from DLLs on WIN32 con't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs. */" + lt_dlsym_const= ;; + *osf5*) + echo >> "$output_objdir/$my_dlsyms" "\ +/* This system does not cope well with relocations in const data */" + lt_dlsym_const= ;; + *) + lt_dlsym_const=const ;; + esac + + $ECHO >> "$output_objdir/$my_dlsyms" "\ +extern $lt_dlsym_const lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; -LT_DLSYM_CONST lt_dlsymlist +$lt_dlsym_const lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," @@ -3443,7 +2457,7 @@ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac - echo >> "$output_objdir/$my_dlsyms" "\ + $ECHO >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; @@ -3486,7 +2500,7 @@ for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; - *) func_append symtab_cflags " $arg" ;; + *) symtab_cflags="$symtab_cflags $arg" ;; esac done @@ -3501,16 +2515,16 @@ case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` fi ;; *) - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ;; esac ;; @@ -3524,8 +2538,8 @@ # really was required. # Nullify the symbol file. - compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi } @@ -3535,7 +2549,6 @@ # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. -# Despite the name, also deal with 64 bit binaries. func_win32_libid () { $opt_debug @@ -3546,11 +2559,9 @@ win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static - # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then - func_to_tool_file "$1" func_convert_file_msys_to_w32 - win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | $SED -n -e ' 1,100{ / I /{ @@ -3579,131 +2590,6 @@ $ECHO "$win32_libid_type" } -# func_cygming_dll_for_implib ARG -# -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib () -{ - $opt_debug - sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` -} - -# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs -# -# The is the core of a fallback implementation of a -# platform-specific function to extract the name of the -# DLL associated with the specified import library LIBNAME. -# -# SECTION_NAME is either .idata$6 or .idata$7, depending -# on the platform and compiler that created the implib. -# -# Echos the name of the DLL associated with the -# specified import library. -func_cygming_dll_for_implib_fallback_core () -{ - $opt_debug - match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` - $OBJDUMP -s --section "$1" "$2" 2>/dev/null | - $SED '/^Contents of section '"$match_literal"':/{ - # Place marker at beginning of archive member dllname section - s/.*/====MARK====/ - p - d - } - # These lines can sometimes be longer than 43 characters, but - # are always uninteresting - /:[ ]*file format pe[i]\{,1\}-/d - /^In archive [^:]*:/d - # Ensure marker is printed - /^====MARK====/p - # Remove all lines with less than 43 characters - /^.\{43\}/!d - # From remaining lines, remove first 43 characters - s/^.\{43\}//' | - $SED -n ' - # Join marker and all lines until next marker into a single line - /^====MARK====/ b para - H - $ b para - b - :para - x - s/\n//g - # Remove the marker - s/^====MARK====// - # Remove trailing dots and whitespace - s/[\. \t]*$// - # Print - /./p' | - # we now have a list, one entry per line, of the stringified - # contents of the appropriate section of all members of the - # archive which possess that section. Heuristic: eliminate - # all those which have a first or second character that is - # a '.' (that is, objdump's representation of an unprintable - # character.) This should work for all archives with less than - # 0x302f exports -- but will fail for DLLs whose name actually - # begins with a literal '.' or a single character followed by - # a '.'. - # - # Of those that remain, print the first one. - $SED -e '/^\./d;/^.\./d;q' -} - -# func_cygming_gnu_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is a GNU/binutils-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_gnu_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` - test -n "$func_cygming_gnu_implib_tmp" -} - -# func_cygming_ms_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is an MS-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_ms_implib_p () -{ - $opt_debug - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` - test -n "$func_cygming_ms_implib_tmp" -} - -# func_cygming_dll_for_implib_fallback ARG -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# -# This fallback implementation is for use when $DLLTOOL -# does not support the --identify-strict option. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib_fallback () -{ - $opt_debug - if func_cygming_gnu_implib_p "$1" ; then - # binutils import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` - elif func_cygming_ms_implib_p "$1" ; then - # ms-generated import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` - else - # unknown - sharedlib_from_linklib_result="" - fi -} # func_extract_an_archive dir oldlib @@ -3712,18 +2598,7 @@ $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" - if test "$lock_old_archive_extraction" = yes; then - lockfile=$f_ex_an_ar_oldlib.lock - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - fi - func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ - 'stat=$?; rm -f "$lockfile"; exit $stat' - if test "$lock_old_archive_extraction" = yes; then - $opt_dry_run || rm -f "$lockfile" - fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else @@ -3794,7 +2669,7 @@ darwin_file= darwin_files= for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ @@ -3809,30 +2684,25 @@ func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done func_extract_archives_result="$my_oldobjs" } -# func_emit_wrapper [arg=no] -# -# Emit a libtool wrapper script on stdout. -# Don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw -# wrapper executable. Must ONLY be called from within -# func_mode_link because it depends on a number of variables -# set therein. + +# func_emit_wrapper_part1 [arg=no] # -# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -# variable will take. If 'yes', then the emitted script -# will assume that the directory in which it is stored is -# the $objdir directory. This is a cygwin/mingw-specific -# behavior. -func_emit_wrapper () -{ - func_emit_wrapper_arg1=${1-no} +# Emit the first part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part1 () +{ + func_emit_wrapper_part1_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part1_arg1=$1 + fi $ECHO "\ #! $SHELL @@ -3848,6 +2718,7 @@ # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # Be Bourne compatible @@ -3878,132 +2749,31 @@ else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then - file=\"\$0\"" - - qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` - $ECHO "\ - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - ECHO=\"$qECHO\" - fi - -# Very basic option parsing. These options are (a) specific to -# the libtool wrapper, (b) are identical between the wrapper -# /script/ and the wrapper /executable/ which is used only on -# windows platforms, and (c) all begin with the string "--lt-" -# (application programs are unlikely to have options which match -# this pattern). -# -# There are only two supported options: --lt-debug and -# --lt-dump-script. There is, deliberately, no --lt-help. -# -# The first argument to this parsing function should be the -# script's $0 value, followed by "$@". -lt_option_debug= -func_parse_lt_options () -{ - lt_script_arg0=\$0 - shift - for lt_opt - do - case \"\$lt_opt\" in - --lt-debug) lt_option_debug=1 ;; - --lt-dump-script) - lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` - test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. - lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` - cat \"\$lt_dump_D/\$lt_dump_F\" - exit 0 - ;; - --lt-*) - \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 - exit 1 - ;; - esac - done - - # Print the debug banner immediately: - if test -n \"\$lt_option_debug\"; then - echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 - fi -} - -# Used when --lt-debug. Prints its arguments to stdout -# (redirection is the responsibility of the caller) -func_lt_dump_args () -{ - lt_dump_args_N=1; - for lt_arg - do - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" - lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` - done -} - -# Core function for launching the target application -func_exec_program_core () -{ -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2* | *-cegcc*) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; - - *) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir/\$program\" \${1+\"\$@\"} + ECHO=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$ECHO works! + : + else + # Restart under the correct shell, and then maybe \$ECHO will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ " - ;; - esac - $ECHO "\ - \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 - exit 1 -} - -# A function to encapsulate launching the target application -# Strips options in the --lt-* namespace from \$@ and -# launches target application with the remaining arguments. -func_exec_program () -{ - for lt_wr_arg - do - case \$lt_wr_arg in - --lt-*) ;; - *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; - esac - shift - done - func_exec_program_core \${1+\"\$@\"} -} - - # Parse options - func_parse_lt_options \"\$0\" \${1+\"\$@\"} + $ECHO "\ # Find the directory that this script lives in. - thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` while test -n \"\$file\"; do - destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then @@ -4013,13 +2783,30 @@ esac fi - file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` done +" +} +# end: func_emit_wrapper_part1 + +# func_emit_wrapper_part2 [arg=no] +# +# Emit the second part of a libtool wrapper script on stdout. +# For more information, see the description associated with +# func_emit_wrapper(), below. +func_emit_wrapper_part2 () +{ + func_emit_wrapper_part2_arg1=no + if test -n "$1" ; then + func_emit_wrapper_part2_arg1=$1 + fi + + $ECHO "\ # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then @@ -4027,7 +2814,7 @@ fi # remove .libs from thisdir case \"\$thisdir\" in - *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi @@ -4082,18 +2869,6 @@ if test -f \"\$progdir/\$program\"; then" - # fixup the dll searchpath if we need to. - # - # Fix the DLL searchpath if we need to. Do this before prepending - # to shlibpath, because on Windows, both are PATH and uninstalled - # libraries must come first. - if test -n "$dllsearchpath"; then - $ECHO "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ @@ -4102,28 +2877,253 @@ # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` export $shlibpath_var " fi + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. - func_exec_program \${1+\"\$@\"} +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 - \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi -fi\ -" +fi\ +" +} +# end: func_emit_wrapper_part2 + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=no + if test -n "$1" ; then + func_emit_wrapper_arg1=$1 + fi + + # split this up so that func_emit_cwrapperexe_src + # can call each part independently. + func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" + func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" +} + + +# func_to_host_path arg +# +# Convert paths to host format when used with build tools. +# Intended for use with "native" mingw (where libtool itself +# is running under the msys shell), or in the following cross- +# build environments: +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# where wine is equipped with the `winepath' executable. +# In the native mingw case, the (msys) shell automatically +# converts paths for any non-msys applications it launches, +# but that facility isn't available from inside the cwrapper. +# Similar accommodations are necessary for $host mingw and +# $build cygwin. Calling this function does no harm for other +# $host/$build combinations not listed above. +# +# ARG is the path (on $build) that should be converted to +# the proper representation for $host. The result is stored +# in $func_to_host_path_result. +func_to_host_path () +{ + func_to_host_path_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + case $build in + *mingw* ) # actually, msys + # awkward: cmd appends spaces to result + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_path_tmp1=`( cmd //c echo "$1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_path_tmp1=`cygpath -w "$1"` + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # Unfortunately, winepath does not exit with a non-zero + # error code, so we are forced to check the contents of + # stdout. On the other hand, if the command is not + # found, the shell will set an exit code of 127 and print + # *an error message* to stdout. So we must check for both + # error code of zero AND non-empty stdout, which explains + # the odd construction: + func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` + if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then + func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ + $SED -e "$lt_sed_naive_backslashify"` + else + # Allow warning below. + func_to_host_path_result="" + fi + ;; + esac + if test -z "$func_to_host_path_result" ; then + func_error "Could not determine host path corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_path_result="$1" + fi + ;; + esac + fi +} +# end: func_to_host_path + +# func_to_host_pathlist arg +# +# Convert pathlists to host format when used with build tools. +# See func_to_host_path(), above. This function supports the +# following $build/$host combinations (but does no harm for +# combinations not listed here): +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# +# Path separators are also converted from $build format to +# $host format. If ARG begins or ends with a path separator +# character, it is preserved (but converted to $host format) +# on output. +# +# ARG is a pathlist (on $build) that should be converted to +# the proper representation on $host. The result is stored +# in $func_to_host_pathlist_result. +func_to_host_pathlist () +{ + func_to_host_pathlist_result="$1" + if test -n "$1" ; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_to_host_pathlist_tmp2="$1" + # Once set for this call, this variable should not be + # reassigned. It is used in tha fallback case. + func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e 's|^:*||' -e 's|:*$||'` + case $build in + *mingw* ) # Actually, msys. + # Awkward: cmd appends spaces to result. + lt_sed_strip_trailing_spaces="s/[ ]*\$//" + func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # unfortunately, winepath doesn't convert pathlists + func_to_host_pathlist_result="" + func_to_host_pathlist_oldIFS=$IFS + IFS=: + for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do + IFS=$func_to_host_pathlist_oldIFS + if test -n "$func_to_host_pathlist_f" ; then + func_to_host_path "$func_to_host_pathlist_f" + if test -n "$func_to_host_path_result" ; then + if test -z "$func_to_host_pathlist_result" ; then + func_to_host_pathlist_result="$func_to_host_path_result" + else + func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" + fi + fi + fi + IFS=: + done + IFS=$func_to_host_pathlist_oldIFS + ;; + esac + if test -z "$func_to_host_pathlist_result" ; then + func_error "Could not determine the host path(s) corresponding to" + func_error " '$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This may break if $1 contains DOS-style drive + # specifications. The fix is not to complicate the expression + # below, but for the user to provide a working wine installation + # with winepath so that path translation in the cross-to-mingw + # case works properly. + lt_replace_pathsep_nix_to_dos="s|:|;|g" + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_replace_pathsep_nix_to_dos"` + fi + # Now, add the leading and trailing path separators back + case "$1" in + :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" + ;; + esac + case "$1" in + *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" + ;; + esac + ;; + esac + fi } - +# end: func_to_host_pathlist # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout @@ -4141,23 +3141,31 @@ This wrapper executable should never be moved out of the build directory. If it is, it will not operate correctly. + + Currently, it simply execs the wrapper *script* "$SHELL $output", + but could eventually absorb all of the scripts functionality and + exec $objdir/$outputname directly. */ EOF cat <<"EOF" -#ifdef _MSC_VER -# define _CRT_SECURE_NO_DEPRECATE 1 -#endif #include #include #ifdef _MSC_VER # include # include # include +# define setmode _setmode #else # include # include # ifdef __CYGWIN__ # include +# define HAVE_SETENV +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif # endif #endif #include @@ -4169,44 +3177,6 @@ #include #include -/* declarations of non-ANSI functions */ -#if defined(__MINGW32__) -# ifdef __STRICT_ANSI__ -int _putenv (const char *); -# endif -#elif defined(__CYGWIN__) -# ifdef __STRICT_ANSI__ -char *realpath (const char *, char *); -int putenv (char *); -int setenv (const char *, const char *, int); -# endif -/* #elif defined (other platforms) ... */ -#endif - -/* portability defines, excluding path handling macros */ -#if defined(_MSC_VER) -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -# define S_IXUSR _S_IEXEC -# ifndef _INTPTR_T_DEFINED -# define _INTPTR_T_DEFINED -# define intptr_t int -# endif -#elif defined(__MINGW32__) -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -#elif defined(__CYGWIN__) -# define HAVE_SETENV -# define FOPEN_WB "wb" -/* #elif defined (other platforms) ... */ -#endif - #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) @@ -4222,7 +3192,14 @@ # define S_IXGRP 0 #endif -/* path handling portability macros */ +#ifdef _MSC_VER +# define S_IXUSR _S_IEXEC +# define stat _stat +# ifndef _INTPTR_T_DEFINED +# define intptr_t int +# endif +#endif + #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' @@ -4253,6 +3230,10 @@ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ +#ifdef __CYGWIN__ +# define FOPEN_WB "wb" +#endif + #ifndef FOPEN_WB # define FOPEN_WB "w" #endif @@ -4265,13 +3246,22 @@ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) -#if defined(LT_DEBUGWRAPPER) -static int lt_debug = 1; +#undef LTWRAPPER_DEBUGPRINTF +#if defined DEBUGWRAPPER +# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args +static void +ltwrapper_debugprintf (const char *fmt, ...) +{ + va_list args; + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); +} #else -static int lt_debug = 0; +# define LTWRAPPER_DEBUGPRINTF(args) #endif -const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ +const char *program_name = NULL; void *xmalloc (size_t num); char *xstrdup (const char *string); @@ -4281,27 +3271,41 @@ int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); -void lt_debugprintf (const char *file, int line, const char *fmt, ...); -void lt_fatal (const char *file, int line, const char *message, ...); -static const char *nonnull (const char *s); -static const char *nonempty (const char *s); +void lt_fatal (const char *message, ...); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_opt_process_env_set (const char *arg); +void lt_opt_process_env_prepend (const char *arg); +void lt_opt_process_env_append (const char *arg); +int lt_split_name_value (const char *arg, char** name, char** value); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); -char **prepare_spawn (char **argv); -void lt_dump_script (FILE *f); + +static const char *script_text_part1 = +EOF + + func_emit_wrapper_part1 yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ "/' -e 's/$/\\n"/' + echo ";" + cat <"))); for (i = 0; i < newargc; i++) { - lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n", - i, nonnull (newargz[i])); + LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : ""))); } EOF @@ -4517,14 +3560,11 @@ mingw*) cat <<"EOF" /* execv doesn't actually work on mingw as expected on unix */ - newargz = prepare_spawn (newargz); rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); if (rval == -1) { /* failed to start process */ - lt_debugprintf (__FILE__, __LINE__, - "(main) failed to launch target \"%s\": %s\n", - lt_argv_zero, nonnull (strerror (errno))); + LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); return 127; } return rval; @@ -4546,7 +3586,7 @@ { void *p = (void *) malloc (num); if (!p) - lt_fatal (__FILE__, __LINE__, "memory exhausted"); + lt_fatal ("Memory exhausted"); return p; } @@ -4580,8 +3620,8 @@ { struct stat st; - lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n", - nonempty (path)); + LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); if ((!path) || (!*path)) return 0; @@ -4598,8 +3638,8 @@ int rval = 0; struct stat st; - lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", - nonempty (path)); + LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", + path ? (*path ? path : "EMPTY!") : "NULL!")); if ((!path) || (!*path)) return 0; @@ -4625,8 +3665,8 @@ int tmp_len; char *concat_name; - lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", - nonempty (wrapper)); + LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", + wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; @@ -4679,8 +3719,7 @@ { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); + lt_fatal ("getcwd failed"); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); @@ -4705,8 +3744,7 @@ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); + lt_fatal ("getcwd failed"); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); @@ -4732,9 +3770,8 @@ int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { - lt_debugprintf (__FILE__, __LINE__, - "checking path component for symlinks: %s\n", - tmp_pathspec); + LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", + tmp_pathspec)); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) @@ -4756,9 +3793,8 @@ } else { - lt_fatal (__FILE__, __LINE__, - "error accessing file \"%s\": %s", - tmp_pathspec, nonnull (strerror (errno))); + char *errstr = strerror (errno); + lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); } } XFREE (tmp_pathspec); @@ -4771,8 +3807,7 @@ tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { - lt_fatal (__FILE__, __LINE__, - "could not follow symlinks for %s", pathspec); + lt_fatal ("Could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif @@ -4798,25 +3833,11 @@ return str; } -void -lt_debugprintf (const char *file, int line, const char *fmt, ...) -{ - va_list args; - if (lt_debug) - { - (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); - va_start (args, fmt); - (void) vfprintf (stderr, fmt, args); - va_end (args); - } -} - static void -lt_error_core (int exit_status, const char *file, - int line, const char *mode, +lt_error_core (int exit_status, const char *mode, const char *message, va_list ap) { - fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + fprintf (stderr, "%s: %s: ", program_name, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); @@ -4825,32 +3846,20 @@ } void -lt_fatal (const char *file, int line, const char *message, ...) +lt_fatal (const char *message, ...) { va_list ap; va_start (ap, message); - lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); va_end (ap); } -static const char * -nonnull (const char *s) -{ - return s ? s : "(null)"; -} - -static const char * -nonempty (const char *s) -{ - return (s && !*s) ? "(empty)" : nonnull (s); -} - void lt_setenv (const char *name, const char *value) { - lt_debugprintf (__FILE__, __LINE__, - "(lt_setenv) setting '%s' to '%s'\n", - nonnull (name), nonnull (value)); + LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", + (name ? name : ""), + (value ? value : ""))); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ @@ -4895,12 +3904,95 @@ return new_value; } +int +lt_split_name_value (const char *arg, char** name, char** value) +{ + const char *p; + int len; + if (!arg || !*arg) + return 1; + + p = strchr (arg, (int)'='); + + if (!p) + return 1; + + *value = xstrdup (++p); + + len = strlen (arg) - strlen (*value); + *name = XMALLOC (char, len); + strncpy (*name, arg, len-1); + (*name)[len - 1] = '\0'; + + return 0; +} + +void +lt_opt_process_env_set (const char *arg) +{ + char *name = NULL; + char *value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); + } + + lt_setenv (name, value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_prepend (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + +void +lt_opt_process_env_append (const char *arg) +{ + char *name = NULL; + char *value = NULL; + char *new_value = NULL; + + if (lt_split_name_value (arg, &name, &value) != 0) + { + XFREE (name); + XFREE (value); + lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); + } + + new_value = lt_extend_str (getenv (name), value, 1); + lt_setenv (name, new_value); + XFREE (new_value); + XFREE (name); + XFREE (value); +} + void lt_update_exe_path (const char *name, const char *value) { - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); + LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + (name ? name : ""), + (value ? value : ""))); if (name && *name && value && *value) { @@ -4919,9 +4011,9 @@ void lt_update_lib_path (const char *name, const char *value) { - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); + LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + (name ? name : ""), + (value ? value : ""))); if (name && *name && value && *value) { @@ -4931,152 +4023,11 @@ } } -EOF - case $host_os in - mingw*) - cat <<"EOF" - -/* Prepares an argument vector before calling spawn(). - Note that spawn() does not by itself call the command interpreter - (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : - ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); - GetVersionEx(&v); - v.dwPlatformId == VER_PLATFORM_WIN32_NT; - }) ? "cmd.exe" : "command.com"). - Instead it simply concatenates the arguments, separated by ' ', and calls - CreateProcess(). We must quote the arguments since Win32 CreateProcess() - interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a - special way: - - Space and tab are interpreted as delimiters. They are not treated as - delimiters if they are surrounded by double quotes: "...". - - Unescaped double quotes are removed from the input. Their only effect is - that within double quotes, space and tab are treated like normal - characters. - - Backslashes not followed by double quotes are not special. - - But 2*n+1 backslashes followed by a double quote become - n backslashes followed by a double quote (n >= 0): - \" -> " - \\\" -> \" - \\\\\" -> \\" - */ -#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -char ** -prepare_spawn (char **argv) -{ - size_t argc; - char **new_argv; - size_t i; - - /* Count number of arguments. */ - for (argc = 0; argv[argc] != NULL; argc++) - ; - - /* Allocate new argument vector. */ - new_argv = XMALLOC (char *, argc + 1); - - /* Put quoted arguments into the new argument vector. */ - for (i = 0; i < argc; i++) - { - const char *string = argv[i]; - - if (string[0] == '\0') - new_argv[i] = xstrdup ("\"\""); - else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) - { - int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); - size_t length; - unsigned int backslashes; - const char *s; - char *quoted_string; - char *p; - - length = 0; - backslashes = 0; - if (quote_around) - length++; - for (s = string; *s != '\0'; s++) - { - char c = *s; - if (c == '"') - length += backslashes + 1; - length++; - if (c == '\\') - backslashes++; - else - backslashes = 0; - } - if (quote_around) - length += backslashes + 1; - - quoted_string = XMALLOC (char, length + 1); - - p = quoted_string; - backslashes = 0; - if (quote_around) - *p++ = '"'; - for (s = string; *s != '\0'; s++) - { - char c = *s; - if (c == '"') - { - unsigned int j; - for (j = backslashes + 1; j > 0; j--) - *p++ = '\\'; - } - *p++ = c; - if (c == '\\') - backslashes++; - else - backslashes = 0; - } - if (quote_around) - { - unsigned int j; - for (j = backslashes; j > 0; j--) - *p++ = '\\'; - *p++ = '"'; - } - *p = '\0'; - - new_argv[i] = quoted_string; - } - else - new_argv[i] = (char *) string; - } - new_argv[argc] = NULL; - - return new_argv; -} -EOF - ;; - esac - - cat <<"EOF" -void lt_dump_script (FILE* f) -{ -EOF - func_emit_wrapper yes | - $SED -e 's/\([\\"]\)/\\\1/g' \ - -e 's/^/ fputs ("/' -e 's/$/\\n", f);/' - cat <<"EOF" -} EOF } # end: func_emit_cwrapperexe_src -# func_win32_import_lib_p ARG -# True if ARG is an import lib, as indicated by $file_magic_cmd -func_win32_import_lib_p () -{ - $opt_debug - case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in - *import*) : ;; - *) false ;; - esac -} - # func_mode_link arg... func_mode_link () { @@ -5121,7 +4072,6 @@ new_inherited_linker_flags= avoid_version=no - bindir= dlfiles= dlprefiles= dlself=no @@ -5214,11 +4164,6 @@ esac case $prev in - bindir) - bindir="$arg" - prev= - continue - ;; dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. @@ -5250,9 +4195,9 @@ ;; *) if test "$prev" = dlfiles; then - func_append dlfiles " $arg" + dlfiles="$dlfiles $arg" else - func_append dlprefiles " $arg" + dlprefiles="$dlprefiles $arg" fi prev= continue @@ -5276,7 +4221,7 @@ *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; - *) func_append deplibs " $qarg.ltframework" # this is fixed later + *) deplibs="$deplibs $qarg.ltframework" # this is fixed later ;; esac ;; @@ -5295,7 +4240,7 @@ moreargs= for fil in `cat "$save_arg"` do -# func_append moreargs " $fil" +# moreargs="$moreargs $fil" arg=$fil # A libtool-controlled object. @@ -5324,7 +4269,7 @@ if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - func_append dlfiles " $pic_object" + dlfiles="$dlfiles $pic_object" prev= continue else @@ -5336,7 +4281,7 @@ # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. - func_append dlprefiles " $pic_object" + dlprefiles="$dlprefiles $pic_object" prev= fi @@ -5406,12 +4351,12 @@ if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; - *) func_append rpath " $arg" ;; + *) rpath="$rpath $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; - *) func_append xrpath " $arg" ;; + *) xrpath="$xrpath $arg" ;; esac fi prev= @@ -5423,28 +4368,28 @@ continue ;; weak) - func_append weak_libs " $arg" + weak_libs="$weak_libs $arg" prev= continue ;; xcclinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $qarg" + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) - func_append compiler_flags " $qarg" + compiler_flags="$compiler_flags $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $wl$qarg" + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" @@ -5480,11 +4425,6 @@ continue ;; - -bindir) - prev=bindir - continue - ;; - -dlopen) prev=dlfiles continue @@ -5535,16 +4475,15 @@ ;; -L*) - func_stripname "-L" '' "$arg" - if test -z "$func_stripname_result"; then + func_stripname '-L' '' "$arg" + dir=$func_stripname_result + if test -z "$dir"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; @@ -5556,30 +4495,24 @@ ;; esac case "$deplibs " in - *" -L$dir "* | *" $arg "*) - # Will only happen for absolute or sysroot arguments - ;; + *" -L$dir "*) ;; *) - # Preserve sysroot, but never include relative directories - case $dir in - [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; - *) func_append deplibs " -L$dir" ;; - esac - func_append lib_search_path " $dir" + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; - *) func_append dllsearchpath ":$dir";; + *) dllsearchpath="$dllsearchpath:$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; + *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac @@ -5589,7 +4522,7 @@ -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) # These systems don't actually have a C or math library (as such) continue ;; @@ -5603,7 +4536,7 @@ ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework - func_append deplibs " System.ltframework" + deplibs="$deplibs System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) @@ -5623,7 +4556,7 @@ ;; esac fi - func_append deplibs " $arg" + deplibs="$deplibs $arg" continue ;; @@ -5635,8 +4568,8 @@ # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. - -model|-arch|-isysroot|--sysroot) - func_append compiler_flags " $arg" + -model|-arch|-isysroot) + compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler @@ -5644,12 +4577,12 @@ ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) - func_append compiler_flags " $arg" + compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; - * ) func_append new_inherited_linker_flags " $arg" ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; esac continue ;; @@ -5716,17 +4649,13 @@ # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; - =*) - func_stripname '=' '' "$dir" - dir=$lt_sysroot$func_stripname_result - ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; - *) func_append xrpath " $dir" ;; + *) xrpath="$xrpath $dir" ;; esac continue ;; @@ -5779,8 +4708,8 @@ for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" - func_append arg " $func_quote_for_eval_result" - func_append compiler_flags " $func_quote_for_eval_result" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" @@ -5795,9 +4724,9 @@ for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" - func_append arg " $wl$func_quote_for_eval_result" - func_append compiler_flags " $wl$func_quote_for_eval_result" - func_append linker_flags " $func_quote_for_eval_result" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" + linker_flags="$linker_flags $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" @@ -5825,27 +4754,23 @@ arg="$func_quote_for_eval_result" ;; - # Flags to be passed through unchanged, with rationale: - # -64, -mips[0-9] enable 64-bit mode for the SGI compiler - # -r[0-9][0-9]* specify processor for the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler - # +DA*, +DD* enable 64-bit mode for the HP compiler - # -q* compiler args for the IBM compiler - # -m*, -t[45]*, -txscale* architecture-specific flags for GCC - # -F/path path to uninstalled frameworks, gcc on darwin - # -p, -pg, --coverage, -fprofile-* profiling flags for GCC - # @file GCC response files - # -tp=* Portland pgcc target processor selection - # --sysroot=* for sysroot support - # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -F/path gives path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC + # @file GCC response files -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ - -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" - func_append compiler_flags " $arg" + compiler_flags="$compiler_flags $arg" continue ;; @@ -5857,7 +4782,7 @@ *.$objext) # A standard object. - func_append objs " $arg" + objs="$objs $arg" ;; *.lo) @@ -5888,7 +4813,7 @@ if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - func_append dlfiles " $pic_object" + dlfiles="$dlfiles $pic_object" prev= continue else @@ -5900,7 +4825,7 @@ # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. - func_append dlprefiles " $pic_object" + dlprefiles="$dlprefiles $pic_object" prev= fi @@ -5945,25 +4870,24 @@ *.$libext) # An archive. - func_append deplibs " $arg" - func_append old_deplibs " $arg" + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" continue ;; *.la) # A libtool-controlled library. - func_resolve_sysroot "$arg" if test "$prev" = dlfiles; then # This library was specified with -dlopen. - func_append dlfiles " $func_resolve_sysroot_result" + dlfiles="$dlfiles $arg" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. - func_append dlprefiles " $func_resolve_sysroot_result" + dlprefiles="$dlprefiles $arg" prev= else - func_append deplibs " $func_resolve_sysroot_result" + deplibs="$deplibs $arg" fi continue ;; @@ -6001,7 +4925,7 @@ if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi @@ -6010,8 +4934,6 @@ func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" - func_to_tool_file "$output_objdir/" - tool_output_objdir=$func_to_tool_file_result # Create the object directory. func_mkdir_p "$output_objdir" @@ -6032,12 +4954,12 @@ # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - if $opt_preserve_dup_deps ; then + if $opt_duplicate_deps ; then case "$libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi - func_append libs " $deplib" + libs="$libs $deplib" done if test "$linkmode" = lib; then @@ -6050,9 +4972,9 @@ if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in - *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; esac - func_append pre_post_deps " $pre_post_dep" + pre_post_deps="$pre_post_deps $pre_post_dep" done fi pre_post_deps= @@ -6119,19 +5041,17 @@ for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= - func_resolve_sysroot "$lib" case $lib in - *.la) func_source "$func_resolve_sysroot_result" ;; + *.la) func_source "$lib" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do - func_basename "$deplib" - deplib_base=$func_basename_result + deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` case " $weak_libs " in *" $deplib_base "*) ;; - *) func_append deplibs " $deplib" ;; + *) deplibs="$deplibs $deplib" ;; esac done done @@ -6152,11 +5072,11 @@ compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else - func_append compiler_flags " $deplib" + compiler_flags="$compiler_flags $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; esac fi fi @@ -6241,7 +5161,7 @@ if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; esac fi fi @@ -6254,8 +5174,7 @@ test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" + newlib_search_path="$newlib_search_path $func_stripname_result" ;; prog) if test "$pass" = conv; then @@ -6269,8 +5188,7 @@ finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" + newlib_search_path="$newlib_search_path $func_stripname_result" ;; *) func_warning "\`-L' is ignored for archives/objects" @@ -6281,21 +5199,17 @@ -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result + dir=$func_stripname_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; - *) func_append xrpath " $dir" ;; + *) xrpath="$xrpath $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; - *.la) - func_resolve_sysroot "$deplib" - lib=$func_resolve_sysroot_result - ;; + *.la) lib="$deplib" ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" @@ -6313,7 +5227,7 @@ match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi @@ -6323,15 +5237,15 @@ ;; esac if test "$valid_a_lib" != yes; then - echo + $ECHO $ECHO "*** Warning: Trying to link with static lib archive $deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because the file extensions .$libext of this argument makes me believe" - echo "*** that it is just a static archive that I should not use here." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because the file extensions .$libext of this argument makes me believe" + $ECHO "*** that it is just a static archive that I should not use here." else - echo + $ECHO $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" @@ -6358,11 +5272,11 @@ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. - func_append newdlprefiles " $deplib" + newdlprefiles="$newdlprefiles $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else - func_append newdlfiles " $deplib" + newdlfiles="$newdlfiles $deplib" fi fi continue @@ -6404,20 +5318,20 @@ # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then - tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; - *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; esac done fi - dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && func_append dlfiles " $dlopen" - test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi if test "$pass" = conv; then @@ -6428,20 +5342,20 @@ func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. - func_append convenience " $ladir/$objdir/$old_library" - func_append old_convenience " $ladir/$objdir/$old_library" + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" - if $opt_preserve_dup_deps ; then + if $opt_duplicate_deps ; then case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi - func_append tmp_libs " $deplib" + tmp_libs="$tmp_libs $deplib" done continue fi # $pass = conv @@ -6449,15 +5363,9 @@ # Get the name of the library we link against. linklib= - if test -n "$old_library" && - { test "$prefer_static_libs" = yes || - test "$prefer_static_libs,$installed" = "built,no"; }; then - linklib=$old_library - else - for l in $old_library $library_names; do - linklib="$l" - done - fi + for l in $old_library $library_names; do + linklib="$l" + done if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi @@ -6474,9 +5382,9 @@ # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. - func_append dlprefiles " $lib $dependency_libs" + dlprefiles="$dlprefiles $lib $dependency_libs" else - func_append newdlfiles " $lib" + newdlfiles="$newdlfiles $lib" fi continue fi # $pass = dlopen @@ -6498,14 +5406,14 @@ # Find the relevant object directory and library name. if test "X$installed" = Xyes; then - if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else - dir="$lt_sysroot$libdir" - absdir="$lt_sysroot$libdir" + dir="$libdir" + absdir="$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else @@ -6513,12 +5421,12 @@ dir="$ladir" absdir="$abs_ladir" # Remove this search path later - func_append notinst_path " $abs_ladir" + notinst_path="$notinst_path $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later - func_append notinst_path " $abs_ladir" + notinst_path="$notinst_path $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" @@ -6529,46 +5437,20 @@ if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi - case "$host" in - # special handling for platforms with PE-DLLs. - *cygwin* | *mingw* | *cegcc* ) - # Linker will automatically link against shared library if both - # static and shared are present. Therefore, ensure we extract - # symbols from the import library if a shared library is present - # (otherwise, the dlopen module name will be incorrect). We do - # this by putting the import library name into $newdlprefiles. - # We recover the dlopen module name by 'saving' the la file - # name in a special purpose variable, and (later) extracting the - # dlname from the la file. - if test -n "$dlname"; then - func_tr_sh "$dir/$linklib" - eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" - func_append newdlprefiles " $dir/$linklib" - else - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - fi - ;; - * ) - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - func_append newdlprefiles " $dir/$dlname" - else - func_append newdlprefiles " $dir/$linklib" - fi - ;; - esac + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi fi # $pass = dlpreopen if test -z "$libdir"; then @@ -6586,7 +5468,7 @@ if test "$linkmode" = prog && test "$pass" != link; then - func_append newlib_search_path " $ladir" + newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" linkalldeplibs=no @@ -6599,8 +5481,7 @@ for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" + newlib_search_path="$newlib_search_path $func_stripname_result" ;; esac # Need to link against all dependency_libs? @@ -6611,12 +5492,12 @@ # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - if $opt_preserve_dup_deps ; then + if $opt_duplicate_deps ; then case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi - func_append tmp_libs " $deplib" + tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... @@ -6631,7 +5512,7 @@ # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; - *) func_append temp_rpath "$absdir:" ;; + *) temp_rpath="$temp_rpath$absdir:" ;; esac fi @@ -6643,7 +5524,7 @@ *) case "$compile_rpath " in *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; + *) compile_rpath="$compile_rpath $absdir" esac ;; esac @@ -6652,7 +5533,7 @@ *) case "$finalize_rpath " in *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; + *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac @@ -6677,12 +5558,12 @@ case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded - func_append notinst_deplibs " $lib" + notinst_deplibs="$notinst_deplibs $lib" need_relink=no ;; *) if test "$installed" = no; then - func_append notinst_deplibs " $lib" + notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi ;; @@ -6699,7 +5580,7 @@ fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then - echo + $ECHO if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else @@ -6717,7 +5598,7 @@ *) case "$compile_rpath " in *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; + *) compile_rpath="$compile_rpath $absdir" esac ;; esac @@ -6726,7 +5607,7 @@ *) case "$finalize_rpath " in *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; + *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac @@ -6780,7 +5661,7 @@ linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" - if test "$linkmode" = prog || test "$opt_mode" != relink; then + if test "$linkmode" = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= @@ -6802,9 +5683,9 @@ if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then - echo - echo "*** And there doesn't seem to be a static archive available" - echo "*** The link will probably fail, sorry" + $ECHO + $ECHO "*** And there doesn't seem to be a static archive available" + $ECHO "*** The link will probably fail, sorry" else add="$dir/$old_library" fi @@ -6836,7 +5717,7 @@ if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" + add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi @@ -6858,7 +5739,7 @@ if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; - *) func_append compile_shlibpath "$add_shlibpath:" ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then @@ -6872,13 +5753,13 @@ test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac fi fi fi - if test "$linkmode" = prog || test "$opt_mode" = relink; then + if test "$linkmode" = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= @@ -6892,7 +5773,7 @@ elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then @@ -6909,7 +5790,7 @@ if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" + add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi @@ -6944,21 +5825,21 @@ # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. - echo + $ECHO $ECHO "*** Warning: This system can not link to static lib archive $lib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then - echo "*** But as you try to build a module library, libtool will still create " - echo "*** a static module, that should work as long as the dlopening application" - echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + $ECHO "*** But as you try to build a module library, libtool will still create " + $ECHO "*** a static module, that should work as long as the dlopening application" + $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module @@ -6986,46 +5867,37 @@ temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; - *) func_append xrpath " $temp_xrpath";; + *) xrpath="$xrpath $temp_xrpath";; esac;; - *) func_append temp_deplibs " $libdir";; + *) temp_deplibs="$temp_deplibs $libdir";; esac done dependency_libs="$temp_deplibs" fi - func_append newlib_search_path " $absdir" + newlib_search_path="$newlib_search_path $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result";; - *) func_resolve_sysroot "$deplib" ;; - esac - if $opt_preserve_dup_deps ; then + if $opt_duplicate_deps ; then case "$tmp_libs " in - *" $func_resolve_sysroot_result "*) - func_append specialdeplibs " $func_resolve_sysroot_result" ;; + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi - func_append tmp_libs " $func_resolve_sysroot_result" + tmp_libs="$tmp_libs $deplib" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do - path= case $deplib in -L*) path="$deplib" ;; *.la) - func_resolve_sysroot "$deplib" - deplib=$func_resolve_sysroot_result func_dirname "$deplib" "" "." - dir=$func_dirname_result + dir="$func_dirname_result" # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; @@ -7052,8 +5924,8 @@ if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi - func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" - func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi @@ -7086,7 +5958,7 @@ compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else - compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" @@ -7103,7 +5975,7 @@ for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; - *) func_append lib_search_path " $dir" ;; + *) lib_search_path="$lib_search_path $dir" ;; esac done newlib_search_path= @@ -7161,10 +6033,10 @@ -L*) case " $tmp_libs " in *" $deplib "*) ;; - *) func_append tmp_libs " $deplib" ;; + *) tmp_libs="$tmp_libs $deplib" ;; esac ;; - *) func_append tmp_libs " $deplib" ;; + *) tmp_libs="$tmp_libs $deplib" ;; esac done eval $var=\"$tmp_libs\" @@ -7180,7 +6052,7 @@ ;; esac if test -n "$i" ; then - func_append tmp_libs " $i" + tmp_libs="$tmp_libs $i" fi done dependency_libs=$tmp_libs @@ -7221,7 +6093,7 @@ # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" - func_append objs "$old_deplibs" + objs="$objs$old_deplibs" ;; lib) @@ -7254,10 +6126,10 @@ if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else - echo + $ECHO $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" - func_append libobjs " $objs" + libobjs="$libobjs $objs" fi fi @@ -7322,7 +6194,7 @@ age="$number_minor" revision="$number_revision" ;; - freebsd-aout|freebsd-elf|qnx|sunos) + freebsd-aout|freebsd-elf|sunos) current="$number_major" revision="$number_minor" age="0" @@ -7455,7 +6327,7 @@ done # Make executables depend on our current version. - func_append verstring ":${current}.0" + verstring="$verstring:${current}.0" ;; qnx) @@ -7523,10 +6395,10 @@ fi func_generate_dlsyms "$libname" "$libname" "yes" - func_append libobjs " $symfileobj" + libobjs="$libobjs $symfileobj" test "X$libobjs" = "X " && libobjs= - if test "$opt_mode" != relink; then + if test "$mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= @@ -7542,7 +6414,7 @@ continue fi fi - func_append removelist " $p" + removelist="$removelist $p" ;; *) ;; esac @@ -7553,28 +6425,27 @@ # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - func_append oldlibs " $output_objdir/$libname.$libext" + oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do - # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` - # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` - # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` + # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` + # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do - func_replace_sysroot "$libdir" - func_append temp_xrpath " -R$func_replace_sysroot_result" + temp_xrpath="$temp_xrpath -R$libdir" case "$finalize_rpath " in *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then @@ -7588,7 +6459,7 @@ for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; - *) func_append dlfiles " $lib" ;; + *) dlfiles="$dlfiles $lib" ;; esac done @@ -7598,19 +6469,19 @@ for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; - *) func_append dlprefiles " $lib" ;; + *) dlprefiles="$dlprefiles $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework - func_append deplibs " System.ltframework" + deplibs="$deplibs System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. @@ -7627,7 +6498,7 @@ *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then - func_append deplibs " -lc" + deplibs="$deplibs -lc" fi ;; esac @@ -7676,7 +6547,7 @@ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" i="" ;; esac @@ -7687,21 +6558,21 @@ set dummy $deplib_matches; shift deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" else droppeddeps=yes - echo + $ECHO $ECHO "*** Warning: dynamic linker does not accept needed library $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which I believe you do not have" - echo "*** because a test_compile did reveal that the linker did not use it for" - echo "*** its dynamic dependency list that programs get resolved with at runtime." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which I believe you do not have" + $ECHO "*** because a test_compile did reveal that the linker did not use it for" + $ECHO "*** its dynamic dependency list that programs get resolved with at runtime." fi fi ;; *) - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" ;; esac done @@ -7719,7 +6590,7 @@ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" i="" ;; esac @@ -7730,29 +6601,29 @@ set dummy $deplib_matches; shift deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" else droppeddeps=yes - echo + $ECHO $ECHO "*** Warning: dynamic linker does not accept needed library $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because a test_compile did reveal that the linker did not use this one" - echo "*** as a dynamic dependency that programs can get resolved with at runtime." + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because a test_compile did reveal that the linker did not use this one" + $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." fi fi else droppeddeps=yes - echo + $ECHO $ECHO "*** Warning! Library $i is needed by this library but I was not able to" - echo "*** make it link in! You will probably need to install it or some" - echo "*** library that it depends on before this library will be fully" - echo "*** functional. Installing it before continuing would be even better." + $ECHO "*** make it link in! You will probably need to install it or some" + $ECHO "*** library that it depends on before this library will be fully" + $ECHO "*** functional. Installing it before continuing would be even better." fi ;; *) - func_append newdeplibs " $i" + newdeplibs="$newdeplibs $i" ;; esac done @@ -7769,27 +6640,15 @@ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` - if test -n "$file_magic_glob"; then - libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob` - else - libnameglob=$libname - fi - test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - if test "$want_nocaseglob" = yes; then - shopt -s nocaseglob - potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` - $nocaseglob - else - potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` - fi + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | @@ -7806,13 +6665,13 @@ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi @@ -7821,12 +6680,12 @@ fi if test -n "$a_deplib" ; then droppeddeps=yes - echo + $ECHO $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else @@ -7837,7 +6696,7 @@ ;; *) # Add a -L argument. - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" ;; esac done # Gone through all deplibs. @@ -7853,7 +6712,7 @@ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" a_deplib="" ;; esac @@ -7864,9 +6723,9 @@ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test - if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi @@ -7875,12 +6734,12 @@ fi if test -n "$a_deplib" ; then droppeddeps=yes - echo + $ECHO $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" + $ECHO "*** I have the capability to make that library automatically link in when" + $ECHO "*** you link to this library. But I can only do this if you have a" + $ECHO "*** shared version of the library, which you do not appear to have" + $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else @@ -7891,32 +6750,32 @@ ;; *) # Add a -L argument. - func_append newdeplibs " $a_deplib" + newdeplibs="$newdeplibs $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" - tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ + -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` done fi - case $tmp_deplibs in - *[!\ \ ]*) - echo + if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | + $GREP . >/dev/null; then + $ECHO if test "X$deplibs_check_method" = "Xnone"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." + $ECHO "*** Warning: inter-library dependencies are not supported in this platform." else - echo "*** Warning: inter-library dependencies are not known to be supported." + $ECHO "*** Warning: inter-library dependencies are not known to be supported." fi - echo "*** All declared inter-library dependencies are being dropped." + $ECHO "*** All declared inter-library dependencies are being dropped." droppeddeps=yes - ;; - esac + fi ;; esac versuffix=$versuffix_save @@ -7928,23 +6787,23 @@ case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework - newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO + $ECHO "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." + $ECHO "*** a static module, that should work as long as the dlopening" + $ECHO "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + $ECHO + $ECHO "*** However, this would only work if libtool was able to extract symbol" + $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" + $ECHO "*** not find such a program. So, this module is probably useless." + $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" @@ -7954,16 +6813,16 @@ build_libtool_libs=no fi else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." + $ECHO "*** The inter-library dependencies that have been dropped here will be" + $ECHO "*** automatically added whenever a program is linked with this library" + $ECHO "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then - echo - echo "*** Since this library must not contain undefined symbols," - echo "*** because either the platform does not support them or" - echo "*** it was explicitly requested with -no-undefined," - echo "*** libtool will only create a static version of it." + $ECHO + $ECHO "*** Since this library must not contain undefined symbols," + $ECHO "*** because either the platform does not support them or" + $ECHO "*** it was explicitly requested with -no-undefined," + $ECHO "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module @@ -7980,9 +6839,9 @@ # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) - newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac @@ -7995,7 +6854,7 @@ *) case " $deplibs " in *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; + new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac @@ -8005,10 +6864,10 @@ -L*) case " $new_libs " in *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; + *) new_libs="$new_libs $deplib" ;; esac ;; - *) func_append new_libs " $deplib" ;; + *) new_libs="$new_libs $deplib" ;; esac done deplibs="$new_libs" @@ -8025,12 +6884,10 @@ hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" - test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then - func_replace_sysroot "$libdir" - libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else @@ -8039,18 +6896,18 @@ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - func_append dep_rpath " $flag" + dep_rpath="$dep_rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; + *) perm_rpath="$perm_rpath $libdir" ;; esac fi done @@ -8068,7 +6925,7 @@ # We should set the runpath_var. rpath= for dir in $perm_rpath; do - func_append rpath "$dir:" + rpath="$rpath$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi @@ -8076,7 +6933,7 @@ fi shlibpath="$finalize_shlibpath" - test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi @@ -8102,18 +6959,18 @@ linknames= for link do - func_append linknames " $link" + linknames="$linknames $link" done # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" - func_append delfiles " $export_symbols" + delfiles="$delfiles $export_symbols" fi orig_export_symbols= @@ -8144,45 +7001,13 @@ $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' - for cmd1 in $cmds; do + for cmd in $cmds; do IFS="$save_ifs" - # Take the normal branch if the nm_file_list_spec branch - # doesn't work or if tool conversion is not needed. - case $nm_file_list_spec~$to_tool_file_cmd in - *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) - try_normal_branch=yes - eval cmd=\"$cmd1\" - func_len " $cmd" - len=$func_len_result - ;; - *) - try_normal_branch=no - ;; - esac - if test "$try_normal_branch" = yes \ - && { test "$len" -lt "$max_cmd_len" \ - || test "$max_cmd_len" -le -1; } - then - func_show_eval "$cmd" 'exit $?' - skipped_export=false - elif test -n "$nm_file_list_spec"; then - func_basename "$output" - output_la=$func_basename_result - save_libobjs=$libobjs - save_output=$output - output=${output_objdir}/${output_la}.nm - func_to_tool_file "$output" - libobjs=$nm_file_list_spec$func_to_tool_file_result - func_append delfiles " $output" - func_verbose "creating $NM input file list: $output" - for obj in $save_libobjs; do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > "$output" - eval cmd=\"$cmd1\" + eval cmd=\"$cmd\" + func_len " $cmd" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then func_show_eval "$cmd" 'exit $?' - output=$save_output - libobjs=$save_libobjs skipped_export=false else # The command line is too long to execute in one step. @@ -8204,7 +7029,7 @@ if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then @@ -8216,7 +7041,7 @@ # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi @@ -8226,7 +7051,7 @@ case " $convenience " in *" $test_deplib "*) ;; *) - func_append tmp_deplibs " $test_deplib" + tmp_deplibs="$tmp_deplibs $test_deplib" ;; esac done @@ -8246,21 +7071,21 @@ test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $convenience - func_append libobjs " $func_extract_archives_result" + libobjs="$libobjs $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" - func_append linker_flags " $flag" + linker_flags="$linker_flags $flag" fi # Make a backup of the uninstalled library when relinking - if test "$opt_mode" = relink; then + if test "$mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi @@ -8305,8 +7130,7 @@ save_libobjs=$libobjs fi save_output=$output - func_basename "$output" - output_la=$func_basename_result + output_la=`$ECHO "X$output" | $Xsed -e "$basename"` # Clear the reloadable object creation command queue and # initialize k to one. @@ -8319,16 +7143,13 @@ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" - echo 'INPUT (' > $output + $ECHO 'INPUT (' > $output for obj in $save_libobjs do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output + $ECHO "$obj" >> $output done - echo ')' >> $output - func_append delfiles " $output" - func_to_tool_file "$output" - output=$func_to_tool_file_result + $ECHO ')' >> $output + delfiles="$delfiles $output" elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" @@ -8342,12 +7163,10 @@ fi for obj do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output + $ECHO "$obj" >> $output done - func_append delfiles " $output" - func_to_tool_file "$output" - output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + delfiles="$delfiles $output" + output=$firstobj\"$file_list_spec$output\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." @@ -8371,19 +7190,17 @@ # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. - reload_objs=$objlist - eval concat_cmds=\"$reload_cmds\" + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" else # All subsequent reloadable object files will link in # the last one created. - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext - objlist=" $obj" + objlist=$obj func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result @@ -8393,12 +7210,11 @@ # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi - func_append delfiles " $output" + delfiles="$delfiles $output" else output= @@ -8432,7 +7248,7 @@ lt_exit=$? # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test "$mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -8453,7 +7269,7 @@ if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then @@ -8465,7 +7281,7 @@ # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi @@ -8506,10 +7322,10 @@ # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $dlprefiles - func_append libobjs " $func_extract_archives_result" + libobjs="$libobjs $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi @@ -8525,7 +7341,7 @@ lt_exit=$? # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test "$mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) @@ -8537,7 +7353,7 @@ IFS="$save_ifs" # Restore the uninstalled library and exit - if test "$opt_mode" = relink; then + if test "$mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then @@ -8618,21 +7434,18 @@ if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` else gentop="$output_objdir/${obj}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi - # If we're not building shared, we need to use non_pic_objs - test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" - # Create the old-style object. - reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' @@ -8692,8 +7505,8 @@ case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac @@ -8704,14 +7517,14 @@ if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) - func_append compile_command " ${wl}-bind_at_load" - func_append finalize_command " ${wl}-bind_at_load" + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac @@ -8725,7 +7538,7 @@ *) case " $compile_deplibs " in *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; + new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac @@ -8735,17 +7548,17 @@ -L*) case " $new_libs " in *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; + *) new_libs="$new_libs $deplib" ;; esac ;; - *) func_append new_libs " $deplib" ;; + *) new_libs="$new_libs $deplib" ;; esac done compile_deplibs="$new_libs" - func_append compile_command " $compile_deplibs" - func_append finalize_command " $finalize_deplibs" + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. @@ -8753,7 +7566,7 @@ # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; esac done fi @@ -8772,18 +7585,18 @@ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" + rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; + *) perm_rpath="$perm_rpath $libdir" ;; esac fi case $host in @@ -8792,12 +7605,12 @@ case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; - *) func_append dllsearchpath ":$libdir";; + *) dllsearchpath="$dllsearchpath:$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; + *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac @@ -8823,18 +7636,18 @@ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" + rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; - *) func_append finalize_perm_rpath " $libdir" ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; esac fi done @@ -8848,8 +7661,8 @@ if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. - compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` - finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" @@ -8861,15 +7674,15 @@ wrappers_required=yes case $host in - *cegcc* | *mingw32ce*) - # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. - wrappers_required=no - ;; *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; + *cegcc) + # Disable wrappers for cegcc, we are cross compiling anyway. + wrappers_required=no + ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no @@ -8878,19 +7691,13 @@ esac if test "$wrappers_required" = no; then # Replace the output file specification. - compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' @@ -8913,7 +7720,7 @@ # We should set the runpath_var. rpath= for dir in $perm_rpath; do - func_append rpath "$dir:" + rpath="$rpath$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi @@ -8921,7 +7728,7 @@ # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do - func_append rpath "$dir:" + rpath="$rpath$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi @@ -8931,18 +7738,11 @@ # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - exit $EXIT_SUCCESS fi @@ -8957,7 +7757,7 @@ if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then - relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= @@ -8969,19 +7769,13 @@ fi # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' - if test -n "$postlink_cmds"; then - func_to_tool_file "$output_objdir/$outputname" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - # Now create the wrapper script. func_verbose "creating $output" @@ -8999,7 +7793,18 @@ fi done relink_command="(cd `pwd`; $relink_command)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $ECHO for shipping. + if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then + case $progpath in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; + *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + esac + qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. @@ -9079,7 +7884,7 @@ else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then - func_append oldobjs " $symfileobj" + oldobjs="$oldobjs $symfileobj" fi fi addlibs="$old_convenience" @@ -9087,10 +7892,10 @@ if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $addlibs - func_append oldobjs " $func_extract_archives_result" + oldobjs="$oldobjs $func_extract_archives_result" fi # Do each command in the archive commands. @@ -9101,10 +7906,10 @@ # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_extract_archives $gentop $dlprefiles - func_append oldobjs " $func_extract_archives_result" + oldobjs="$oldobjs $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have @@ -9120,9 +7925,9 @@ done | sort | sort -uc >/dev/null 2>&1); then : else - echo "copying selected object files to avoid basename conflicts..." + $ECHO "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" - func_append generated " $gentop" + generated="$generated $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= @@ -9146,9 +7951,9 @@ esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - func_append oldobjs " $gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" ;; - *) func_append oldobjs " $obj" ;; + *) oldobjs="$oldobjs $obj" ;; esac done fi @@ -9158,16 +7963,6 @@ len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds - elif test -n "$archiver_list_spec"; then - func_verbose "using command file archive linking..." - for obj in $oldobjs - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > $output_objdir/$libname.libcmd - func_to_tool_file "$output_objdir/$libname.libcmd" - oldobjs=" $archiver_list_spec$func_to_tool_file_result" - cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." @@ -9241,7 +8036,7 @@ done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi @@ -9264,19 +8059,9 @@ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" - func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" - ;; - -L*) - func_stripname -L '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -L$func_replace_sysroot_result" + newdependency_libs="$newdependency_libs $libdir/$name" ;; - -R*) - func_stripname -R '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -R$func_replace_sysroot_result" - ;; - *) func_append newdependency_libs " $deplib" ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; esac done dependency_libs="$newdependency_libs" @@ -9290,9 +8075,9 @@ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" - func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + newdlfiles="$newdlfiles $libdir/$name" ;; - *) func_append newdlfiles " $lib" ;; + *) newdlfiles="$newdlfiles $lib" ;; esac done dlfiles="$newdlfiles" @@ -9309,7 +8094,7 @@ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" - func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + newdlprefiles="$newdlprefiles $libdir/$name" ;; esac done @@ -9321,7 +8106,7 @@ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac - func_append newdlfiles " $abs" + newdlfiles="$newdlfiles $abs" done dlfiles="$newdlfiles" newdlprefiles= @@ -9330,33 +8115,15 @@ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac - func_append newdlprefiles " $abs" + newdlprefiles="$newdlprefiles $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin - # In fact, it would be nice if we could use this code for all target - # systems that can't hard-code library paths into their executables - # and that have no shared library path variable independent of PATH, - # but it turns out we can't easily determine that from inspecting - # libtool variables, so we have to hard-code the OSs to which it - # applies here; at the moment, that means platforms that use the PE - # object format with DLL files. See the long comment at the top of - # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) - # If a -bindir argument was supplied, place the dll there. - if test "x$bindir" != x ; - then - func_relative_path "$install_libdir" "$bindir" - tdlname=$func_relative_path_result$dlname - else - # Otherwise fall back on heuristic. - tdlname=../bin/$dlname - fi - ;; + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $ECHO > $output "\ # $outputname - a libtool library file @@ -9415,7 +8182,7 @@ exit $EXIT_SUCCESS } -{ test "$opt_mode" = link || test "$opt_mode" = relink; } && +{ test "$mode" = link || test "$mode" = relink; } && func_mode_link ${1+"$@"} @@ -9435,9 +8202,9 @@ for arg do case $arg in - -f) func_append RM " $arg"; rmforce=yes ;; - -*) func_append RM " $arg" ;; - *) func_append files " $arg" ;; + -f) RM="$RM $arg"; rmforce=yes ;; + -*) RM="$RM $arg" ;; + *) files="$files $arg" ;; esac done @@ -9446,23 +8213,24 @@ rmdirs= + origobjdir="$objdir" for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then - odir="$objdir" + objdir="$origobjdir" else - odir="$dir/$objdir" + objdir="$dir/$origobjdir" fi func_basename "$file" name="$func_basename_result" - test "$opt_mode" = uninstall && odir="$dir" + test "$mode" = uninstall && objdir="$dir" - # Remember odir for removal later, being careful to avoid duplicates - if test "$opt_mode" = clean; then + # Remember objdir for removal later, being careful to avoid duplicates + if test "$mode" = clean; then case " $rmdirs " in - *" $odir "*) ;; - *) func_append rmdirs " $odir" ;; + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; esac fi @@ -9488,17 +8256,18 @@ # Delete the libtool libraries and symlinks. for n in $library_names; do - func_append rmfiles " $odir/$n" + rmfiles="$rmfiles $objdir/$n" done - test -n "$old_library" && func_append rmfiles " $odir/$old_library" + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - case "$opt_mode" in + case "$mode" in clean) - case " $library_names " in + case " $library_names " in + # " " in the beginning catches empty $dlname *" $dlname "*) ;; - *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; esac - test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ;; uninstall) if test -n "$library_names"; then @@ -9526,19 +8295,19 @@ # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then - func_append rmfiles " $dir/$pic_object" + rmfiles="$rmfiles $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then - func_append rmfiles " $dir/$non_pic_object" + rmfiles="$rmfiles $dir/$non_pic_object" fi fi ;; *) - if test "$opt_mode" = clean ; then + if test "$mode" = clean ; then noexename=$name case $file in *.exe) @@ -9548,7 +8317,7 @@ noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe - func_append rmfiles " $file" + rmfiles="$rmfiles $file" ;; esac # Do a test to see if this is a libtool program. @@ -9557,7 +8326,7 @@ func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result - func_append rmfiles " $func_ltwrapper_scriptname_result" + rmfiles="$rmfiles $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename @@ -9565,12 +8334,12 @@ # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles - func_append rmfiles " $odir/$name $odir/${name}S.${objext}" + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then - func_append rmfiles " $odir/lt-$name" + rmfiles="$rmfiles $objdir/lt-$name" fi if test "X$noexename" != "X$name" ; then - func_append rmfiles " $odir/lt-${noexename}.c" + rmfiles="$rmfiles $objdir/lt-${noexename}.c" fi fi fi @@ -9578,6 +8347,7 @@ esac func_show_eval "$RM $rmfiles" 'exit_status=1' done + objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do @@ -9589,16 +8359,16 @@ exit $exit_status } -{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && +{ test "$mode" = uninstall || test "$mode" = clean; } && func_mode_uninstall ${1+"$@"} -test -z "$opt_mode" && { +test -z "$mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode \`$opt_mode'" + func_fatal_help "invalid operation mode \`$mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/siscone/Makefile.am fastjet-3.0.6+dfsg/plugins/SISCone/siscone/siscone/Makefile.am --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/siscone/Makefile.am 2012-06-13 14:15:00.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/siscone/Makefile.am 2013-04-06 07:19:37.000000000 +0000 @@ -28,4 +28,4 @@ vicinity.h # Don't distribute config.h. Note that it'll be accessible through -I. -nodist_include_HEADERS = config.h +nodist_noinst_HEADERS = config.h diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/siscone/Makefile.in fastjet-3.0.6+dfsg/plugins/SISCone/siscone/siscone/Makefile.in --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/siscone/Makefile.in 2012-06-25 13:55:10.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/siscone/Makefile.in 2013-10-28 16:16:24.000000000 +0000 @@ -67,7 +67,7 @@ am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" \ +am__installdirs = "$(DESTDIR)$(libdir)" \ "$(DESTDIR)$(sisconeincludedir)" LTLIBRARIES = $(lib_LTLIBRARIES) libsiscone_la_LIBADD = @@ -97,7 +97,7 @@ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive -HEADERS = $(nodist_include_HEADERS) $(sisconeinclude_HEADERS) +HEADERS = $(nodist_noinst_HEADERS) $(sisconeinclude_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ @@ -151,7 +151,6 @@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -175,7 +174,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -188,7 +186,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -201,7 +198,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -235,6 +231,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ @@ -281,7 +278,7 @@ # Don't distribute config.h. Note that it'll be accessible through -I. -nodist_include_HEADERS = config.h +nodist_noinst_HEADERS = config.h all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive @@ -413,26 +410,6 @@ clean-libtool: -rm -rf .libs _libs -install-nodist_includeHEADERS: $(nodist_include_HEADERS) - @$(NORMAL_INSTALL) - test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" - @list='$(nodist_include_HEADERS)'; test -n "$(includedir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ - $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ - done - -uninstall-nodist_includeHEADERS: - @$(NORMAL_UNINSTALL) - @list='$(nodist_include_HEADERS)'; test -n "$(includedir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(includedir)" && rm -f $$files install-sisconeincludeHEADERS: $(sisconeinclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(sisconeincludedir)" || $(MKDIR_P) "$(DESTDIR)$(sisconeincludedir)" @@ -652,7 +629,7 @@ all-am: Makefile $(LTLIBRARIES) $(HEADERS) config.h installdirs: installdirs-recursive installdirs-am: - for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(sisconeincludedir)"; do \ + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(sisconeincludedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive @@ -703,8 +680,7 @@ info-am: -install-data-am: install-nodist_includeHEADERS \ - install-sisconeincludeHEADERS +install-data-am: install-sisconeincludeHEADERS install-dvi: install-dvi-recursive @@ -750,8 +726,7 @@ ps-am: -uninstall-am: uninstall-libLTLIBRARIES uninstall-nodist_includeHEADERS \ - uninstall-sisconeincludeHEADERS +uninstall-am: uninstall-libLTLIBRARIES uninstall-sisconeincludeHEADERS .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ ctags-recursive install-am install-strip tags-recursive @@ -764,16 +739,14 @@ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ - install-info-am install-libLTLIBRARIES install-man \ - install-nodist_includeHEADERS install-pdf install-pdf-am \ - install-ps install-ps-am install-sisconeincludeHEADERS \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am uninstall-libLTLIBRARIES \ - uninstall-nodist_includeHEADERS \ - uninstall-sisconeincludeHEADERS + install-info-am install-libLTLIBRARIES install-man install-pdf \ + install-pdf-am install-ps install-ps-am \ + install-sisconeincludeHEADERS install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags tags-recursive uninstall uninstall-am \ + uninstall-libLTLIBRARIES uninstall-sisconeincludeHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/siscone/siscone.cpp fastjet-3.0.6+dfsg/plugins/SISCone/siscone/siscone/siscone.cpp --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/siscone/siscone.cpp 2012-06-13 14:15:00.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/siscone/siscone.cpp 2013-10-28 16:15:28.000000000 +0000 @@ -20,15 +20,15 @@ // along with this program; if not, write to the Free Software // // Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA // // // -// $Revision:: 325 $// -// $Date:: 2011-11-25 12:41:17 +0100 (Fri, 25 Nov 2011) $// +// $Revision:: 341 $// +// $Date:: 2013-04-08 12:21:06 +0200 (Mon, 08 Apr 2013) $// /////////////////////////////////////////////////////////////////////////////// //#ifdef HAVE_CONFIG_H #include "config.h" //#else //#define PACKAGE_NAME "SISCone" -//#define VERSION "1.4.0-devel" +//#define VERSION "2.0.6" //#warning "No config.h file available, using preset values" //#endif diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/siscone/spherical/Makefile.am fastjet-3.0.6+dfsg/plugins/SISCone/siscone/siscone/spherical/Makefile.am --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/siscone/spherical/Makefile.am 2012-06-13 14:15:00.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/siscone/spherical/Makefile.am 2013-04-06 07:19:37.000000000 +0000 @@ -15,7 +15,7 @@ # install the SISCone headers sisconeincludedir = $(includedir)/siscone/spherical -include_HEADERS = geom_2d.h\ +sisconeinclude_HEADERS = geom_2d.h\ hash.h\ momentum.h\ protocones.h\ diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/siscone/spherical/Makefile.in fastjet-3.0.6+dfsg/plugins/SISCone/siscone/siscone/spherical/Makefile.in --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/siscone/spherical/Makefile.in 2012-06-25 13:55:10.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/siscone/spherical/Makefile.in 2013-10-28 16:16:24.000000000 +0000 @@ -36,7 +36,7 @@ build_triplet = @build@ host_triplet = @host@ subdir = siscone/spherical -DIST_COMMON = README $(include_HEADERS) $(srcdir)/Makefile.am \ +DIST_COMMON = README $(sisconeinclude_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac @@ -67,7 +67,8 @@ am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" +am__installdirs = "$(DESTDIR)$(libdir)" \ + "$(DESTDIR)$(sisconeincludedir)" LTLIBRARIES = $(lib_LTLIBRARIES) libsiscone_spherical_la_LIBADD = am_libsiscone_spherical_la_OBJECTS = \ @@ -99,7 +100,7 @@ $(LDFLAGS) -o $@ SOURCES = $(libsiscone_spherical_la_SOURCES) DIST_SOURCES = $(libsiscone_spherical_la_SOURCES) -HEADERS = $(include_HEADERS) +HEADERS = $(sisconeinclude_HEADERS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) @@ -122,7 +123,6 @@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -146,7 +146,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -159,7 +158,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -172,7 +170,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -206,6 +203,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ @@ -239,7 +237,7 @@ # install the SISCone headers sisconeincludedir = $(includedir)/siscone/spherical -include_HEADERS = geom_2d.h\ +sisconeinclude_HEADERS = geom_2d.h\ hash.h\ momentum.h\ protocones.h\ @@ -404,26 +402,26 @@ clean-libtool: -rm -rf .libs _libs -install-includeHEADERS: $(include_HEADERS) +install-sisconeincludeHEADERS: $(sisconeinclude_HEADERS) @$(NORMAL_INSTALL) - test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" - @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + test -z "$(sisconeincludedir)" || $(MKDIR_P) "$(DESTDIR)$(sisconeincludedir)" + @list='$(sisconeinclude_HEADERS)'; test -n "$(sisconeincludedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ - echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ - $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sisconeincludedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(sisconeincludedir)" || exit $$?; \ done -uninstall-includeHEADERS: +uninstall-sisconeincludeHEADERS: @$(NORMAL_UNINSTALL) - @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + @list='$(sisconeinclude_HEADERS)'; test -n "$(sisconeincludedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(includedir)" && rm -f $$files + echo " ( cd '$(DESTDIR)$(sisconeincludedir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(sisconeincludedir)" && rm -f $$files ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ @@ -511,7 +509,7 @@ check: check-am all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: - for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \ + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(sisconeincludedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am @@ -562,7 +560,7 @@ info-am: -install-data-am: install-includeHEADERS +install-data-am: install-sisconeincludeHEADERS install-dvi: install-dvi-am @@ -608,7 +606,7 @@ ps-am: -uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES +uninstall-am: uninstall-libLTLIBRARIES uninstall-sisconeincludeHEADERS .MAKE: install-am install-strip @@ -618,14 +616,14 @@ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-includeHEADERS install-info \ - install-info-am install-libLTLIBRARIES install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags uninstall uninstall-am uninstall-includeHEADERS \ - uninstall-libLTLIBRARIES + install-html-am install-info install-info-am \ + install-libLTLIBRARIES install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-sisconeincludeHEADERS \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags uninstall uninstall-am \ + uninstall-libLTLIBRARIES uninstall-sisconeincludeHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. diff -Nru fastjet-3.0.3+dfsg/plugins/SISCone/siscone/siscone/spherical/siscone.cpp fastjet-3.0.6+dfsg/plugins/SISCone/siscone/siscone/spherical/siscone.cpp --- fastjet-3.0.3+dfsg/plugins/SISCone/siscone/siscone/spherical/siscone.cpp 2012-06-13 14:15:00.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/SISCone/siscone/siscone/spherical/siscone.cpp 2013-10-28 16:15:28.000000000 +0000 @@ -22,15 +22,15 @@ // along with this program; if not, write to the Free Software // // Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA // // // -// $Revision:: 325 $// -// $Date:: 2011-11-25 12:41:17 +0100 (Fri, 25 Nov 2011) $// +// $Revision:: 341 $// +// $Date:: 2013-04-08 12:21:06 +0200 (Mon, 08 Apr 2013) $// /////////////////////////////////////////////////////////////////////////////// //#ifdef HAVE_CONFIG_H #include //#else //#define PACKAGE_NAME "SISCone" -//#define VERSION "1.4.0-devel" +//#define VERSION "2.0.6" //#warning "No config.h file available, using preset values" //#endif diff -Nru fastjet-3.0.3+dfsg/plugins/TrackJet/Makefile.in fastjet-3.0.6+dfsg/plugins/TrackJet/Makefile.in --- fastjet-3.0.3+dfsg/plugins/TrackJet/Makefile.in 2012-06-25 14:16:26.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/TrackJet/Makefile.in 2013-10-28 16:10:54.000000000 +0000 @@ -171,7 +171,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -204,7 +203,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -217,7 +215,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -230,7 +227,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -266,6 +262,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/plugins/TrackJet/fastjet/Makefile.in fastjet-3.0.6+dfsg/plugins/TrackJet/fastjet/Makefile.in --- fastjet-3.0.3+dfsg/plugins/TrackJet/fastjet/Makefile.in 2012-06-25 14:16:26.000000000 +0000 +++ fastjet-3.0.6+dfsg/plugins/TrackJet/fastjet/Makefile.in 2013-10-28 16:10:54.000000000 +0000 @@ -110,7 +110,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -143,7 +142,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -156,7 +154,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -169,7 +166,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -205,6 +201,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/src/ClosestPair2D.cc fastjet-3.0.6+dfsg/src/ClosestPair2D.cc --- fastjet-3.0.3+dfsg/src/ClosestPair2D.cc 2012-06-13 14:14:56.000000000 +0000 +++ fastjet-3.0.6+dfsg/src/ClosestPair2D.cc 2013-04-06 07:19:35.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: ClosestPair2D.cc 2577 2011-09-13 15:11:38Z salam $ +// $Id: ClosestPair2D.cc 3071 2013-04-01 12:52:46Z cacciari $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -182,7 +182,7 @@ ID1 = _heap->minloc(); ID2 = _ID(_points[ID1].neighbour); distance2 = _points[ID1].neighbour_dist2; - if (ID1 > ID2) swap(ID1,ID2); + if (ID1 > ID2) std::swap(ID1,ID2); } diff -Nru fastjet-3.0.3+dfsg/src/ClusterSequence.cc fastjet-3.0.6+dfsg/src/ClusterSequence.cc --- fastjet-3.0.3+dfsg/src/ClusterSequence.cc 2012-06-25 14:33:07.000000000 +0000 +++ fastjet-3.0.6+dfsg/src/ClusterSequence.cc 2013-04-06 07:19:35.000000000 +0000 @@ -1,7 +1,7 @@ //STARTHEADER -// $Id: ClusterSequence.cc 2896 2012-06-25 14:33:07Z salam $ +// $Id: ClusterSequence.cc 3079 2013-04-05 20:42:21Z cacciari $ // -// Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez +// Copyright (c) 2005-2013, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // //---------------------------------------------------------------------- // This file is part of FastJet. @@ -384,10 +384,10 @@ (*ostr) << "# M. Cacciari, G.P. Salam and G. Soyez \n"; (*ostr) << "# A software package for jet finding and analysis at colliders \n"; (*ostr) << "# http://fastjet.fr \n"; - (*ostr) << "# \n"; + (*ostr) << "# \n"; (*ostr) << "# Please cite EPJC72(2012)1896 [arXiv:1111.6097] if you use this package\n"; (*ostr) << "# for scientific work and optionally PLB641(2006)57 [hep-ph/0512210]. \n"; - (*ostr) << "# \n"; + (*ostr) << "# \n"; (*ostr) << "# FastJet is provided without warranty under the terms of the GNU GPLv2.\n"; (*ostr) << "# It uses T. Chan's closest pair algorithm, S. Fortune's Voronoi code"; #ifndef DROP_CGAL diff -Nru fastjet-3.0.3+dfsg/src/ClusterSequenceStructure.cc fastjet-3.0.6+dfsg/src/ClusterSequenceStructure.cc --- fastjet-3.0.3+dfsg/src/ClusterSequenceStructure.cc 2012-06-13 14:14:56.000000000 +0000 +++ fastjet-3.0.6+dfsg/src/ClusterSequenceStructure.cc 2013-04-06 07:19:35.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: ClusterSequenceStructure.cc 2577 2011-09-13 15:11:38Z salam $ +// $Id: ClusterSequenceStructure.cc 3071 2013-04-01 12:52:46Z cacciari $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -30,7 +30,9 @@ #include "fastjet/Error.hh" #include "fastjet/PseudoJet.hh" #include "fastjet/ClusterSequence.hh" +#ifndef __FJCORE__ #include "fastjet/ClusterSequenceAreaBase.hh" +#endif // __FJCORE__ #include FASTJET_BEGIN_NAMESPACE // defined in fastjet/internal/base.hh @@ -254,6 +256,7 @@ // associated ClusterSequence (See ClusterSequenceAreaBase for details) //---------------------------------------------------------------------- +#ifndef __FJCORE__ // if possible, return a valid ClusterSequenceAreaBase pointer; otherwise // throw an error const ClusterSequenceAreaBase * ClusterSequenceStructure::validated_csab() const { @@ -262,7 +265,6 @@ return csab; } - // check if it has a defined area bool ClusterSequenceStructure::has_area() const{ if (! has_associated_cluster_sequence()) return false; @@ -294,6 +296,8 @@ return validated_csab()->is_pure_ghost(reference); } +#endif // __FJCORE__ + FASTJET_END_NAMESPACE diff -Nru fastjet-3.0.3+dfsg/src/ClusterSequence_Delaunay.cc fastjet-3.0.6+dfsg/src/ClusterSequence_Delaunay.cc --- fastjet-3.0.3+dfsg/src/ClusterSequence_Delaunay.cc 2012-06-13 14:14:56.000000000 +0000 +++ fastjet-3.0.6+dfsg/src/ClusterSequence_Delaunay.cc 2013-06-05 08:13:48.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: ClusterSequence_Delaunay.cc 2577 2011-09-13 15:11:38Z salam $ +// $Id: ClusterSequence_Delaunay.cc 3114 2013-05-04 08:46:00Z salam $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -30,6 +30,7 @@ #include "fastjet/Error.hh" #include "fastjet/PseudoJet.hh" #include "fastjet/ClusterSequence.hh" +#include "fastjet/internal/DynamicNearestNeighbours.hh" #include #include #include diff -Nru fastjet-3.0.3+dfsg/src/ClusterSequence_TiledN2.cc fastjet-3.0.6+dfsg/src/ClusterSequence_TiledN2.cc --- fastjet-3.0.3+dfsg/src/ClusterSequence_TiledN2.cc 2012-06-13 14:14:56.000000000 +0000 +++ fastjet-3.0.6+dfsg/src/ClusterSequence_TiledN2.cc 2013-10-28 15:10:06.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: ClusterSequence_TiledN2.cc 2696 2011-11-15 09:42:59Z soyez $ +// $Id: ClusterSequence_TiledN2.cc 3213 2013-09-16 06:59:06Z soyez $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -273,7 +273,7 @@ TiledJet * briefjets = new TiledJet[n]; TiledJet * jetA = briefjets, * jetB; TiledJet oldB; - + oldB.tile_index=0; // prevents a gcc warning // will be used quite deep inside loops, but declare it here so that // memory (de)allocation gets done only once @@ -516,7 +516,7 @@ TiledJet * briefjets = new TiledJet[n]; TiledJet * jetA = briefjets, * jetB; TiledJet oldB; - + oldB.tile_index=0; // prevents a gcc warning // will be used quite deep inside loops, but declare it here so that // memory (de)allocation gets done only once @@ -733,6 +733,7 @@ TiledJet * briefjets = new TiledJet[n]; TiledJet * jetA = briefjets, * jetB; TiledJet oldB; + oldB.tile_index=0; // prevents a gcc warning // will be used quite deep inside loops, but declare it here so that diff -Nru fastjet-3.0.3+dfsg/src/CompositeJetStructure.cc fastjet-3.0.6+dfsg/src/CompositeJetStructure.cc --- fastjet-3.0.3+dfsg/src/CompositeJetStructure.cc 2012-06-13 14:14:56.000000000 +0000 +++ fastjet-3.0.6+dfsg/src/CompositeJetStructure.cc 2013-04-06 07:19:35.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: CompositeJetStructure.cc 2696 2011-11-15 09:42:59Z soyez $ +// $Id: CompositeJetStructure.cc 3071 2013-04-01 12:52:46Z cacciari $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -44,6 +44,8 @@ CompositeJetStructure::CompositeJetStructure(const std::vector & initial_pieces, const JetDefinition::Recombiner * recombiner) : _pieces(initial_pieces){ + +#ifndef __FJCORE__ // deal with area support (cache the area if needed) //-------------------------------------------------- // check if all the pieces have area, in which case store it @@ -67,6 +69,10 @@ } else { _area_4vector_ptr = 0; } +#else + if (recombiner){}; // ugly trick to prevent a gcc warning + _area_4vector_ptr = 0; +#endif } @@ -114,6 +120,7 @@ } +#ifndef __FJCORE__ // area-related material // check if it has a well-defined area @@ -166,6 +173,7 @@ return true; } +#endif // __FJCORE__ FASTJET_END_NAMESPACE // defined in fastjet/internal/base.hh diff -Nru fastjet-3.0.3+dfsg/src/Makefile.in fastjet-3.0.6+dfsg/src/Makefile.in --- fastjet-3.0.3+dfsg/src/Makefile.in 2012-06-25 14:16:27.000000000 +0000 +++ fastjet-3.0.6+dfsg/src/Makefile.in 2013-10-28 16:10:54.000000000 +0000 @@ -157,7 +157,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -190,7 +189,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -203,7 +201,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -216,7 +213,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -252,6 +248,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/src/PseudoJet.cc fastjet-3.0.6+dfsg/src/PseudoJet.cc --- fastjet-3.0.3+dfsg/src/PseudoJet.cc 2012-06-13 14:14:56.000000000 +0000 +++ fastjet-3.0.6+dfsg/src/PseudoJet.cc 2013-04-06 16:40:24.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: PseudoJet.cc 2687 2011-11-14 11:17:51Z soyez $ +// $Id: PseudoJet.cc 3083 2013-04-06 12:15:17Z cacciari $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -30,7 +30,9 @@ #include "fastjet/Error.hh" #include "fastjet/PseudoJet.hh" #include "fastjet/ClusterSequence.hh" +#ifndef __FJCORE__ #include "fastjet/ClusterSequenceAreaBase.hh" +#endif // __FJCORE__ #include "fastjet/CompositeJetStructure.hh" #include #include @@ -66,6 +68,14 @@ void PseudoJet::_finish_init () { _kt2 = this->px()*this->px() + this->py()*this->py(); _phi = pseudojet_invalid_phi; + // strictly speaking, _rap does not need initialising, because + // it's never used as long as _phi == pseudojet_invalid_phi + // (and gets set when _phi is requested). However ATLAS + // 2013-03-28 complained that they sometimes have NaN's in + // _rap and this interferes with some of their internal validation. + // So we initialise it; penalty is about 0.3ns per PseudoJet out of about + // 10ns total initialisation time (on a intel Core i7 2.7GHz) + _rap = pseudojet_invalid_rap; } //---------------------------------------------------------------------- @@ -667,6 +677,8 @@ // associated ClusterSequence (See ClusterSequenceAreaBase for details) //---------------------------------------------------------------------- +#ifndef __FJCORE__ + //---------------------------------------------------------------------- // if possible, return a valid ClusterSequenceAreaBase pointer; otherwise // throw an error @@ -714,6 +726,7 @@ return validated_structure_ptr()->is_pure_ghost(*this); } +#endif // __FJCORE__ //---------------------------------------------------------------------- // diff -Nru fastjet-3.0.3+dfsg/src/PseudoJetStructureBase.cc fastjet-3.0.6+dfsg/src/PseudoJetStructureBase.cc --- fastjet-3.0.3+dfsg/src/PseudoJetStructureBase.cc 2012-06-13 14:14:56.000000000 +0000 +++ fastjet-3.0.6+dfsg/src/PseudoJetStructureBase.cc 2013-04-06 07:19:35.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: PseudoJetStructureBase.cc 2682 2011-11-12 23:35:47Z soyez $ +// $Id: PseudoJetStructureBase.cc 3071 2013-04-01 12:52:46Z cacciari $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -31,7 +31,9 @@ #include "fastjet/Error.hh" #include "fastjet/PseudoJet.hh" #include "fastjet/ClusterSequence.hh" +#ifndef __FJCORE__ #include "fastjet/ClusterSequenceAreaBase.hh" +#endif // __FJCORE__ using namespace std; @@ -73,6 +75,7 @@ throw Error("This PseudoJet structure is not associated with a valid ClusterSequence"); } +#ifndef __FJCORE__ // if the jet has valid area information then return a pointer to // the associated ClusterSequenceAreaBase object; otherwise throw an error // @@ -80,6 +83,7 @@ const ClusterSequenceAreaBase * PseudoJetStructureBase::validated_csab() const{ throw Error("This PseudoJet structure is not associated with a valid cluster sequence with area"); } +#endif //------------------------------------------------------------- @@ -192,6 +196,7 @@ // the following ones require a computation of the area in the // parent ClusterSequence (See ClusterSequenceAreaBase for details) //------------------------------------------------------------------ +#ifndef __FJCORE__ // return the jet (scalar) area. // @@ -221,5 +226,6 @@ bool PseudoJetStructureBase::is_pure_ghost(const PseudoJet & /*reference*/) const{ throw Error("This PseudoJet structure has no implementation for is_pure_ghost"); } +#endif // __FJCORE__ FASTJET_END_NAMESPACE diff -Nru fastjet-3.0.3+dfsg/src/Selector.cc fastjet-3.0.6+dfsg/src/Selector.cc --- fastjet-3.0.3+dfsg/src/Selector.cc 2012-06-13 14:14:56.000000000 +0000 +++ fastjet-3.0.6+dfsg/src/Selector.cc 2013-04-06 07:19:35.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: Selector.cc 2687 2011-11-14 11:17:51Z soyez $ +// $Id: Selector.cc 3071 2013-04-01 12:52:46Z cacciari $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -30,7 +30,9 @@ #include #include #include "fastjet/Selector.hh" +#ifndef __FJCORE__ #include "fastjet/GhostedAreaSpec.hh" // for area support +#endif // __FJCORE__ using namespace std; @@ -130,6 +132,7 @@ } } +#ifndef __FJCORE__ // area using default ghost area double Selector::area() const{ return area(gas::def_ghost_area); @@ -152,6 +155,7 @@ // check what passes the selection return ghost_spec.ghost_area() * ((*this)(ghosts)).size(); } +#endif // __FJCORE__ //---------------------------------------------------------------------- @@ -1339,6 +1343,7 @@ //---------------------------------------------------------------------- +#ifndef __FJCORE__ /// helper for selecting the pure ghost class SW_IsPureGhost : public SelectorWorker { public: @@ -1364,7 +1369,6 @@ return Selector(new SW_IsPureGhost()); } - //---------------------------------------------------------------------- // Selector and workers for obtaining a Selector from an old // RangeDefinition @@ -1419,6 +1423,7 @@ Selector::Selector(const RangeDefinition &range) { _worker.reset(new SW_RangeDefinition(range)); } +#endif // __FJCORE__ // operators applying directly on a Selector diff -Nru fastjet-3.0.3+dfsg/tools/JHTopTagger.cc fastjet-3.0.6+dfsg/tools/JHTopTagger.cc --- fastjet-3.0.3+dfsg/tools/JHTopTagger.cc 2012-06-13 14:14:49.000000000 +0000 +++ fastjet-3.0.6+dfsg/tools/JHTopTagger.cc 2013-10-28 15:10:06.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: JHTopTagger.cc 2689 2011-11-14 14:51:06Z soyez $ +// $Id: JHTopTagger.cc 3249 2013-10-28 15:06:25Z salam $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -67,7 +67,7 @@ // warn if the jet has not been clustered with a Cambridge/Aachen // algorithm - if (! jet.validated_cs()->jet_def().jet_algorithm() == cambridge_algorithm) + if (jet.validated_cs()->jet_def().jet_algorithm() != cambridge_algorithm) _warnings_nonca.warn("JHTopTagger should only be applied on jets from a Cambridge/Aachen clustering; use it with other algorithms at your own risk."); diff -Nru fastjet-3.0.3+dfsg/tools/Makefile.in fastjet-3.0.6+dfsg/tools/Makefile.in --- fastjet-3.0.3+dfsg/tools/Makefile.in 2012-06-25 14:16:27.000000000 +0000 +++ fastjet-3.0.6+dfsg/tools/Makefile.in 2013-10-28 16:10:54.000000000 +0000 @@ -179,7 +179,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -212,7 +211,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -225,7 +223,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -238,7 +235,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -274,6 +270,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/tools/MassDropTagger.cc fastjet-3.0.6+dfsg/tools/MassDropTagger.cc --- fastjet-3.0.3+dfsg/tools/MassDropTagger.cc 2012-06-13 14:14:49.000000000 +0000 +++ fastjet-3.0.6+dfsg/tools/MassDropTagger.cc 2013-10-28 15:10:06.000000000 +0000 @@ -1,5 +1,5 @@ //STARTHEADER -// $Id: MassDropTagger.cc 2732 2011-11-21 17:28:31Z soyez $ +// $Id: MassDropTagger.cc 3249 2013-10-28 15:06:25Z salam $ // // Copyright (c) 2005-2011, Matteo Cacciari, Gavin P. Salam and Gregory Soyez // @@ -57,7 +57,7 @@ // issue a warning if the jet is not obtained through a C/A // clustering if ((! j.has_associated_cluster_sequence()) || - (! j.validated_cs()->jet_def().jet_algorithm() == cambridge_algorithm)) + (j.validated_cs()->jet_def().jet_algorithm() != cambridge_algorithm)) _warnings_nonca.warn("MassDropTagger should only be applied on jets from a Cambridge/Aachen clustering; use it with other algorithms at your own risk."); diff -Nru fastjet-3.0.3+dfsg/tools/fastjet/Makefile.in fastjet-3.0.6+dfsg/tools/fastjet/Makefile.in --- fastjet-3.0.3+dfsg/tools/fastjet/Makefile.in 2012-06-25 14:16:27.000000000 +0000 +++ fastjet-3.0.6+dfsg/tools/fastjet/Makefile.in 2013-10-28 16:10:54.000000000 +0000 @@ -123,7 +123,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -156,7 +155,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -169,7 +167,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -182,7 +179,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -218,6 +214,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ diff -Nru fastjet-3.0.3+dfsg/tools/fastjet/tools/Makefile.in fastjet-3.0.6+dfsg/tools/fastjet/tools/Makefile.in --- fastjet-3.0.3+dfsg/tools/fastjet/tools/Makefile.in 2012-06-25 14:16:27.000000000 +0000 +++ fastjet-3.0.6+dfsg/tools/fastjet/tools/Makefile.in 2013-10-28 16:10:54.000000000 +0000 @@ -110,7 +110,6 @@ D0_CXXFLAGS = @D0_CXXFLAGS@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ @@ -143,7 +142,6 @@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ NM = @NM@ NMEDIT = @NMEDIT@ @@ -156,7 +154,6 @@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -169,7 +166,6 @@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ @@ -205,6 +201,7 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@