diff -Nru flatzebra-0.1.5/COPYING flatzebra-0.1.6/COPYING
--- flatzebra-0.1.5/COPYING 2001-12-28 17:09:39.000000000 +0000
+++ flatzebra-0.1.6/COPYING 2012-07-08 03:02:46.000000000 +0000
@@ -1,8 +1,8 @@
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
@@ -15,7 +15,7 @@
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
+the GNU Lesser General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
@@ -55,7 +55,7 @@
The precise terms and conditions for copying, distribution and
modification follow.
-
+
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
@@ -110,7 +110,7 @@
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
-
+
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
@@ -168,7 +168,7 @@
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
-
+
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
@@ -225,7 +225,7 @@
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
-
+
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
@@ -278,7 +278,7 @@
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
-
+
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
@@ -303,17 +303,16 @@
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
- Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
@@ -336,5 +335,5 @@
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
+library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License.
diff -Nru flatzebra-0.1.5/Makefile.am flatzebra-0.1.6/Makefile.am
--- flatzebra-0.1.5/Makefile.am 2009-02-27 02:17:20.000000000 +0000
+++ flatzebra-0.1.6/Makefile.am 2010-12-31 06:26:50.000000000 +0000
@@ -1,4 +1,4 @@
-# $Id: Makefile.am,v 1.3 2009/02/27 02:17:20 sarrazip Exp $
+# $Id: Makefile.am,v 1.4 2010/12/31 06:26:50 sarrazip Exp $
SUBDIRS = src
@@ -33,7 +33,7 @@
EXTRA_DIST = \
bootstrap \
autogen.sh \
- $(PACKAGE)-$(API).spec \
+ $(PACKAGE).spec \
$(M4_MACROS) \
ltmain.sh
#
diff -Nru flatzebra-0.1.5/Makefile.in flatzebra-0.1.6/Makefile.in
--- flatzebra-0.1.5/Makefile.in 2010-05-13 03:20:37.000000000 +0000
+++ flatzebra-0.1.6/Makefile.in 2012-07-14 03:41:48.000000000 +0000
@@ -15,7 +15,7 @@
@SET_MAKE@
-# $Id: Makefile.am,v 1.3 2009/02/27 02:17:20 sarrazip Exp $
+# $Id: Makefile.am,v 1.4 2010/12/31 06:26:50 sarrazip Exp $
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
@@ -39,9 +39,9 @@
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/flatzebra-0.1.pc.in \
- $(srcdir)/flatzebra-0.1.spec.in $(top_srcdir)/configure \
- AUTHORS COPYING ChangeLog INSTALL NEWS THANKS TODO \
- config.guess config.sub depcomp install-sh ltmain.sh missing
+ $(srcdir)/flatzebra.spec.in $(top_srcdir)/configure AUTHORS \
+ COPYING ChangeLog INSTALL NEWS THANKS TODO config.guess \
+ config.sub depcomp install-sh ltmain.sh missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/macros/ac_compile_warnings.m4 \
$(top_srcdir)/macros/libtool.m4 \
@@ -57,7 +57,7 @@
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES = flatzebra-0.1.spec flatzebra-0.1.pc
+CONFIG_CLEAN_FILES = flatzebra.spec flatzebra-0.1.pc
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
@@ -155,6 +155,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
@@ -178,6 +179,7 @@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MINVER_SDL = @MINVER_SDL@
MINVER_SDL_IMAGE = @MINVER_SDL_IMAGE@
MINVER_SDL_MIXER = @MINVER_SDL_MIXER@
@@ -196,6 +198,7 @@
PACKAGE_SUMMARY_EN = @PACKAGE_SUMMARY_EN@
PACKAGE_SUMMARY_FR = @PACKAGE_SUMMARY_FR@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
@@ -212,6 +215,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -245,7 +249,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -282,7 +285,7 @@
EXTRA_DIST = \
bootstrap \
autogen.sh \
- $(PACKAGE)-$(API).spec \
+ $(PACKAGE).spec \
$(M4_MACROS) \
ltmain.sh
@@ -340,7 +343,7 @@
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
-flatzebra-0.1.spec: $(top_builddir)/config.status $(srcdir)/flatzebra-0.1.spec.in
+flatzebra.spec: $(top_builddir)/config.status $(srcdir)/flatzebra.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
flatzebra-0.1.pc: $(top_builddir)/config.status $(srcdir)/flatzebra-0.1.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
diff -Nru flatzebra-0.1.5/NEWS flatzebra-0.1.6/NEWS
--- flatzebra-0.1.5/NEWS 2010-05-17 00:34:09.000000000 +0000
+++ flatzebra-0.1.6/NEWS 2012-07-14 03:11:49.000000000 +0000
@@ -1,3 +1,16 @@
+2012-07-14: Version 0.1.6 released
+
+ Joystick class now supports two sticks, as well as the two
+ trigger buttons. D-pad support dropped.
+ Fixed bug with Joystick::getYAxisValue().
+ Added squaredLength() and dotProduct() to Couple and RCouple.
+ PixmapArray constructor does not require fixed array size anymore;
+ the internal vector now resizes as needed.
+ Put new FSF address in GPL copyright notices.
+ Small fixes to compile under Visual C++ on Win32.
+ RPM spec file rewritten using Fedora template.
+ (RPM spec file now compatible with /usr/lib64 directory.)
+
2010-05-16: Version 0.1.5 released
Added support for toggling between full screen mode and
diff -Nru flatzebra-0.1.5/README flatzebra-0.1.6/README
--- flatzebra-0.1.5/README 2010-05-12 02:02:27.000000000 +0000
+++ flatzebra-0.1.6/README 2012-07-14 03:41:27.000000000 +0000
@@ -1,6 +1,6 @@
flatzebra - A generic game engine for 2D double-buffering animation
-Copyright (C) 2001-2010 Pierre Sarrazin
+Copyright (C) 2001-2012 Pierre Sarrazin
This program is free software distributed under the GNU GPL.
See the file COPYING.
diff -Nru flatzebra-0.1.5/aclocal.m4 flatzebra-0.1.6/aclocal.m4
--- flatzebra-0.1.5/aclocal.m4 2010-05-13 03:20:34.000000000 +0000
+++ flatzebra-0.1.6/aclocal.m4 2012-07-14 03:41:47.000000000 +0000
@@ -13,8 +13,8 @@
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
-[m4_warning([this file was generated for autoconf 2.63.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically `autoreconf'.])])
@@ -53,10 +53,12 @@
fi
fi
+ as_save_PATH="$PATH"
if test "x$prefix" != xNONE; then
PATH="$prefix/bin:$prefix/usr/bin:$PATH"
fi
AC_PATH_PROG(SDL_CONFIG, sdl-config, no, [$PATH])
+ PATH="$as_save_PATH"
min_sdl_version=ifelse([$1], ,0.11.0,$1)
AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
no_sdl=""
diff -Nru flatzebra-0.1.5/configure flatzebra-0.1.6/configure
--- flatzebra-0.1.5/configure 2010-05-13 03:20:38.000000000 +0000
+++ flatzebra-0.1.6/configure 2012-07-14 03:41:49.000000000 +0000
@@ -1,18 +1,22 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63.
+# Generated by GNU Autoconf 2.68.
+#
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
@@ -20,23 +24,15 @@
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
esac
-
fi
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
as_nl='
'
export as_nl
@@ -44,7 +40,13 @@
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
@@ -55,7 +57,7 @@
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
- case $arg in
+ case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
@@ -78,13 +80,6 @@
}
fi
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
@@ -94,15 +89,16 @@
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
+as_myself=
+case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
IFS=$as_save_IFS
;;
@@ -114,12 +110,16 @@
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
+ exit 1
fi
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
@@ -131,7 +131,263 @@
LANGUAGE=C
export LANGUAGE
-# Required to use basename.
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ # Preserve -v and -x to the replacement shell.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+ export CONFIG_SHELL
+ case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+ esac
+ exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
@@ -145,8 +401,12 @@
as_basename=false
fi
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
-# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
@@ -166,564 +426,129 @@
}
s/.*/./; q'`
-# CDPATH.
-$as_unset CDPATH
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
-if test "x$CONFIG_SHELL" = x; then
- if (eval ":") 2>/dev/null; then
- as_have_required=yes
-else
- as_have_required=no
-fi
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
- if test $as_have_required = yes && (eval ":
-(as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
}
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
fi
-
-if as_func_ret_success; then
- :
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
else
- exitcode=1
- echo as_func_ret_success failed.
+ as_ln_s='cp -p'
fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
fi
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
else
- exitcode=1
- echo positional parameters were not saved.
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
fi
+as_executable_p=$as_test_x
-test \$exitcode = 0) || { (exit 1); exit 1; }
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-(
- as_lineno_1=\$LINENO
- as_lineno_2=\$LINENO
- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
- :
-else
- as_candidate_shells=
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- case $as_dir in
- /*)
- for as_base in sh bash ksh sh5; do
- as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
- done;;
- esac
-done
-IFS=$as_save_IFS
-
-
- for as_shell in $as_candidate_shells $SHELL; do
- # Try only shells that exist, to save several forks.
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { ("$as_shell") 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-_ASEOF
-}; then
- CONFIG_SHELL=$as_shell
- as_have_required=yes
- if { "$as_shell" 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-(as_func_return () {
- (exit $1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
- break
-fi
-
-fi
-
- done
-
- if test "x$CONFIG_SHELL" != x; then
- for as_var in BASH_ENV ENV
- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- done
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-fi
-
-
- if test $as_have_required = no; then
- echo This script requires a shell more modern than all the
- echo shells that I found on your system. Please install a
- echo modern shell, or manually run the script under such a
- echo shell if you do have one.
- { (exit 1); exit 1; }
-fi
-
-
-fi
-
-fi
-
-
-
-(eval "as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0") || {
- echo No shell found that supports shell functions.
- echo Please tell bug-autoconf@gnu.org about your system,
- echo including any error possibly output before this message.
- echo This can help us improve future autoconf versions.
- echo Configuration will now proceed without shell functions.
-}
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-
-
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$lt_ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
- ;;
-esac
-
-ECHO=${lt_ECHO-echo}
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
- # Yippee, $ECHO works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<_LT_EOF
-$*
-_LT_EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
- if test "X${echo_test_string+set}" != Xset; then
- # find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
- then
- break
- fi
- done
- fi
-
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
- else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
-
- if test "X$ECHO" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- ECHO='print -r'
- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
- else
- # Try using printf.
- ECHO='printf %s\n'
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- ECHO="$CONFIG_SHELL $0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$CONFIG_SHELL $0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "$0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
- else
- # Oops. We lost completely, so just stick with echo.
- ECHO=echo
- fi
- fi
- fi
- fi
- fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
- lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+SHELL=${CONFIG_SHELL-/bin/sh}
-
-exec 7<&0 &1
+test -n "$DJDIR" || exec 7<&0 &1
# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
@@ -738,7 +563,6 @@
subdirs=
MFLAGS=
MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
# Identity of this package.
PACKAGE_NAME=
@@ -746,6 +570,7 @@
PACKAGE_VERSION=
PACKAGE_STRING=
PACKAGE_BUGREPORT=
+PACKAGE_URL=
ac_unique_file="src/flatzebra/GameEngine.h"
# Factoring default headers for most tests.
@@ -798,9 +623,11 @@
LIPO
NMEDIT
DSYMUTIL
-lt_ECHO
+MANIFEST_TOOL
RANLIB
+ac_ct_AR
AR
+DLLTOOL
OBJDUMP
LN_S
NM
@@ -903,6 +730,7 @@
program_transform_name
prefix
exec_prefix
+PACKAGE_URL
PACKAGE_BUGREPORT
PACKAGE_STRING
PACKAGE_VERSION
@@ -919,6 +747,7 @@
with_pic
enable_fast_install
with_gnu_ld
+with_sysroot
enable_libtool_lock
with_sdl_prefix
with_sdl_exec_prefix
@@ -999,8 +828,9 @@
fi
case $ac_option in
- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *) ac_optarg=yes ;;
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
@@ -1045,8 +875,7 @@
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1072,8 +901,7 @@
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1277,8 +1105,7 @@
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1294,8 +1121,7 @@
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1325,17 +1151,17 @@
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
;;
*=*)
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
@@ -1344,7 +1170,7 @@
$as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
$as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
;;
esac
@@ -1352,15 +1178,13 @@
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { $as_echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "missing argument to $ac_option"
fi
if test -n "$ac_unrecognized_opts"; then
case $enable_option_checking in
no) ;;
- fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
- { (exit 1); exit 1; }; } ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
*) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
esac
fi
@@ -1383,8 +1207,7 @@
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
- { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
done
# There might be people who depend on the old broken behavior: `$host'
@@ -1398,8 +1221,8 @@
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
+ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used" >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
@@ -1414,11 +1237,9 @@
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- { $as_echo "$as_me: error: working directory cannot be determined" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "pwd does not report name of working directory"
# Find the source files, if location was not specified.
@@ -1457,13 +1278,11 @@
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
- { (exit 1); exit 1; }; }
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1503,7 +1322,7 @@
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
+ -q, --quiet, --silent do not print \`checking ...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
@@ -1580,6 +1399,8 @@
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-sysroot=DIR Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).
--with-sdl-prefix=PFX Prefix where SDL is installed (optional)
--with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)
@@ -1589,7 +1410,7 @@
LDFLAGS linker flags, e.g. -L if you have libraries in a
nonstandard directory
LIBS libraries to pass to the linker, e.g. -l
- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if
you have headers in a nonstandard directory
CC C compiler command
CFLAGS C compiler flags
@@ -1599,6 +1420,7 @@
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
+Report bugs to the package provider.
_ACEOF
ac_status=$?
fi
@@ -1662,21 +1484,406 @@
if $ac_init_version; then
cat <<\_ACEOF
configure
-generated by GNU Autoconf 2.63
+generated by GNU Autoconf 2.68
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
exit
fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_compile
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case declares $2.
+ For example, HP-UX 11i declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer to if __STDC__ is defined, since
+ exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include
+#else
+# include
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_cpp
+
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by $as_me, which was
-generated by GNU Autoconf 2.63. Invocation command line was
+generated by GNU Autoconf 2.68. Invocation command line was
$ $0 $@
@@ -1712,8 +1919,8 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
-done
+ $as_echo "PATH: $as_dir"
+ done
IFS=$as_save_IFS
} >&5
@@ -1750,9 +1957,9 @@
ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ as_fn_append ac_configure_args1 " '$ac_arg'"
if test $ac_must_keep_next = true; then
ac_must_keep_next=false # Got value, back to normal.
else
@@ -1768,13 +1975,13 @@
-* ) ac_must_keep_next=true ;;
esac
fi
- ac_configure_args="$ac_configure_args '$ac_arg'"
+ as_fn_append ac_configure_args " '$ac_arg'"
;;
esac
done
done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
@@ -1786,11 +1993,9 @@
{
echo
- cat <<\_ASBOX
-## ---------------- ##
+ $as_echo "## ---------------- ##
## Cache variables. ##
-## ---------------- ##
-_ASBOX
+## ---------------- ##"
echo
# The following way of writing the cache mishandles newlines in values,
(
@@ -1799,13 +2004,13 @@
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) $as_unset $ac_var ;;
+ *) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
@@ -1824,11 +2029,9 @@
)
echo
- cat <<\_ASBOX
-## ----------------- ##
+ $as_echo "## ----------------- ##
## Output variables. ##
-## ----------------- ##
-_ASBOX
+## ----------------- ##"
echo
for ac_var in $ac_subst_vars
do
@@ -1841,11 +2044,9 @@
echo
if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------------- ##
+ $as_echo "## ------------------- ##
## File substitutions. ##
-## ------------------- ##
-_ASBOX
+## ------------------- ##"
echo
for ac_var in $ac_subst_files
do
@@ -1859,11 +2060,9 @@
fi
if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
+ $as_echo "## ----------- ##
## confdefs.h. ##
-## ----------- ##
-_ASBOX
+## ----------- ##"
echo
cat confdefs.h
echo
@@ -1877,46 +2076,53 @@
exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -f -r conftest* confdefs.h
+$as_echo "/* confdefs.h */" > confdefs.h
+
# Predefined preprocessor variables.
cat >>confdefs.h <<_ACEOF
#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
# Let the site file select an alternate cache file if it wants to.
# Prefer an explicitly selected file to automatically selected ones.
ac_site_file1=NONE
ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then
- ac_site_file1=$CONFIG_SITE
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
elif test "x$prefix" != xNONE; then
ac_site_file1=$prefix/share/config.site
ac_site_file2=$prefix/etc/config.site
@@ -1927,19 +2133,23 @@
for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
test "x$ac_site_file" = xNONE && continue
- if test -r "$ac_site_file"; then
- { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
fi
done
if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
$as_echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . "$cache_file";;
@@ -1947,7 +2157,7 @@
esac
fi
else
- { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
$as_echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
@@ -1962,11 +2172,11 @@
eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
ac_cache_corrupted=: ;;
,set)
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
@@ -1976,17 +2186,17 @@
ac_old_val_w=`echo x $ac_old_val`
ac_new_val_w=`echo x $ac_new_val`
if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
ac_cache_corrupted=:
else
- { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
eval $ac_var=\$ac_old_val
fi
- { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
@@ -1998,35 +2208,20 @@
esac
case " $ac_configure_args " in
*" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
esac
fi
done
if $ac_cache_corrupted; then
- { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -2055,9 +2250,7 @@
fi
done
if test -z "$ac_aux_dir"; then
- { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
fi
# These three variables are undocumented and unsupported,
@@ -2083,10 +2276,10 @@
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
$as_echo_n "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
+if ${ac_cv_path_install+:} false; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2094,11 +2287,11 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
/etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
/usr/ucb/* ) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
@@ -2135,7 +2328,7 @@
;;
esac
-done
+ done
IFS=$as_save_IFS
rm -rf conftest.one conftest.two conftest.dir
@@ -2151,7 +2344,7 @@
INSTALL=$ac_install_sh
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
$as_echo "$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
@@ -2162,7 +2355,7 @@
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
$as_echo_n "checking whether build environment is sane... " >&6; }
# Just in case
sleep 1
@@ -2173,15 +2366,11 @@
'
case `pwd` in
*[\\\"\#\$\&\'\`$am_lf]*)
- { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5
-$as_echo "$as_me: error: unsafe absolute working directory name" >&2;}
- { (exit 1); exit 1; }; };;
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
esac
case $srcdir in
*[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5
-$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;}
- { (exit 1); exit 1; }; };;
+ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
esac
# Do `set' in a subshell so we don't clobber the current shell's
@@ -2203,11 +2392,8 @@
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
- { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&5
-$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+alias in your environment" "$LINENO" 5
fi
test "$2" = conftest.file
@@ -2216,13 +2402,10 @@
# Ok.
:
else
- { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-Check your system clock" >&5
-$as_echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
@@ -2250,7 +2433,7 @@
am_missing_run="$MISSING --run "
else
am_missing_run=
- { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
@@ -2271,9 +2454,9 @@
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
+if ${ac_cv_prog_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$STRIP"; then
@@ -2284,24 +2467,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
$as_echo "$STRIP" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2311,9 +2494,9 @@
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_STRIP"; then
@@ -2324,24 +2507,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
$as_echo "$ac_ct_STRIP" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2350,7 +2533,7 @@
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
@@ -2363,10 +2546,10 @@
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
if test -z "$MKDIR_P"; then
- if test "${ac_cv_path_mkdir+set}" = set; then
+ if ${ac_cv_path_mkdir+:} false; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2374,7 +2557,7 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
+ for ac_prog in mkdir gmkdir; do
for ac_exec_ext in '' $ac_executable_extensions; do
{ test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
@@ -2386,11 +2569,12 @@
esac
done
done
-done
+ done
IFS=$as_save_IFS
fi
+ test -d ./--version && rmdir ./--version
if test "${ac_cv_path_mkdir+set}" = set; then
MKDIR_P="$ac_cv_path_mkdir -p"
else
@@ -2398,11 +2582,10 @@
# value for MKDIR_P within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the value is a relative name.
- test -d ./--version && rmdir ./--version
MKDIR_P="$ac_install_sh -d"
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
$as_echo "$MKDIR_P" >&6; }
mkdir_p="$MKDIR_P"
@@ -2415,9 +2598,9 @@
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then
+if ${ac_cv_prog_AWK+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AWK"; then
@@ -2428,24 +2611,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
- { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
$as_echo "$AWK" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2453,11 +2636,11 @@
test -n "$AWK" && break
done
-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
$as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
@@ -2465,7 +2648,7 @@
all:
@echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
case `${MAKE-make} -f conftest.make 2>/dev/null` in
*@@@%%%=?*=@@@%%%*)
eval ac_cv_prog_make_${ac_make}_set=yes;;
@@ -2475,11 +2658,11 @@
rm -f conftest.make
fi
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:$LINENO: result: yes" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
SET_MAKE=
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
@@ -2499,9 +2682,7 @@
am__isrc=' -I$(srcdir)'
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
- { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
fi
fi
@@ -2517,7 +2698,7 @@
# Define the identity of the package.
PACKAGE=flatzebra
- VERSION=0.1.5
+ VERSION=0.1.6
cat >>confdefs.h <<_ACEOF
@@ -2561,8 +2742,8 @@
RELEASE=`echo $VERSION | cut -d . -f 3`;
PACKAGE_FULL_NAME="FlatZebra"
-PACKAGE_SUMMARY_EN="Generic Game Engine library for 2D double-buffering animation"
-PACKAGE_SUMMARY_FR="Moteur générique de jeu vidéo 2D à double tampon"
+PACKAGE_SUMMARY_EN="Small Engine for 2D video games like BurgerSpace"
+PACKAGE_SUMMARY_FR="Petit moteur pour jeux vidéo 2D comme BurgerSpace"
@@ -2589,9 +2770,9 @@
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then
+if ${ac_cv_prog_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CXX"; then
@@ -2602,24 +2783,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
CXX=$ac_cv_prog_CXX
if test -n "$CXX"; then
- { $as_echo "$as_me:$LINENO: result: $CXX" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
$as_echo "$CXX" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2633,9 +2814,9 @@
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CXX"; then
@@ -2646,24 +2827,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CXX="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
if test -n "$ac_ct_CXX"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
$as_echo "$ac_ct_CXX" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2676,7 +2857,7 @@
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
@@ -2687,48 +2868,31 @@
fi
fi
# Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
set X $ac_compile
ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -V >&5") 2>&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -2744,8 +2908,8 @@
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
-{ $as_echo "$as_me:$LINENO: checking for C++ compiler default output file name" >&5
-$as_echo_n "checking for C++ compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C++ compiler works" >&5
+$as_echo_n "checking whether the C++ compiler works... " >&6; }
ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
# The possible output files:
@@ -2761,17 +2925,17 @@
done
rm -f $ac_rmfiles
-if { (ac_try="$ac_link_default"
+if { { ac_try="$ac_link_default"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link_default") 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
# Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
# in a Makefile. We should not override ac_cv_exeext if it was cached,
@@ -2788,7 +2952,7 @@
# certainly right.
break;;
*.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
then :; else
ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
fi
@@ -2807,84 +2971,41 @@
else
ac_file=''
fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-if test -z "$ac_file"; then
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: C++ compiler cannot create executables
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C++ compiler cannot create executables
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5
-$as_echo_n "checking whether the C++ compiler works... " >&6; }
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot run C++ compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot run C++ compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }; }
- fi
- fi
-fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+as_fn_error 77 "C++ compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler default output file name" >&5
+$as_echo_n "checking for C++ compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
$as_echo_n "checking for suffix of executables... " >&6; }
-if { (ac_try="$ac_link"
+if { { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link") 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
# If both `conftest.exe' and `conftest' are `present' (well, observable)
# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
# work properly (i.e., refer to `conftest.exe'), while it won't with
@@ -2899,32 +3020,83 @@
esac
done
else
- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }; }
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
fi
-
-rm -f conftest$ac_cv_exeext
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
$as_echo "$ac_cv_exeext" >&6; }
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
-{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C++ compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
$as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then
+if ${ac_cv_objext+:} false; then :
$as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -2936,17 +3108,17 @@
}
_ACEOF
rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
+if { { ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
(eval "$ac_compile") 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
for ac_file in conftest.o conftest.obj conftest.*; do
test -f "$ac_file" || continue;
case $ac_file in
@@ -2959,31 +3131,23 @@
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }; }
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
fi
-
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
$as_echo "$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
$as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -2997,37 +3161,16 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+if ac_fn_cxx_try_compile "$LINENO"; then :
ac_compiler_gnu=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
+ ac_compiler_gnu=no
fi
-
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
if test $ac_compiler_gnu = yes; then
GXX=yes
@@ -3036,20 +3179,16 @@
fi
ac_test_CXXFLAGS=${CXXFLAGS+set}
ac_save_CXXFLAGS=$CXXFLAGS
-{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
$as_echo_n "checking whether $CXX accepts -g... " >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then
+if ${ac_cv_prog_cxx_g+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_save_cxx_werror_flag=$ac_cxx_werror_flag
ac_cxx_werror_flag=yes
ac_cv_prog_cxx_g=no
CXXFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -3060,35 +3199,11 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+if ac_fn_cxx_try_compile "$LINENO"; then :
ac_cv_prog_cxx_g=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CXXFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ CXXFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -3099,36 +3214,12 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+else
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
CXXFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -3139,42 +3230,17 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+if ac_fn_cxx_try_compile "$LINENO"; then :
ac_cv_prog_cxx_g=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
fi
-
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cxx_werror_flag=$ac_save_cxx_werror_flag
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
$as_echo "$ac_cv_prog_cxx_g" >&6; }
if test "$ac_test_CXXFLAGS" = set; then
CXXFLAGS=$ac_save_CXXFLAGS
@@ -3208,7 +3274,7 @@
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
$as_echo_n "checking for style of include used by $am_make... " >&6; }
am__include="#"
am__quote=
@@ -3236,12 +3302,12 @@
fi
-{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
$as_echo "$_am_result" >&6; }
rm -f confinc confmf
# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
+if test "${enable_dependency_tracking+set}" = set; then :
enableval=$enable_dependency_tracking;
fi
@@ -3261,9 +3327,9 @@
depcc="$CXX" am_compiler_list=
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
+if ${am_cv_CXX_dependencies_compiler_type+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -3371,7 +3437,7 @@
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
@@ -3386,13 +3452,13 @@
fi
-{ $as_echo "$as_me:$LINENO: checking maximum warning verbosity option" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking maximum warning verbosity option" >&5
$as_echo_n "checking maximum warning verbosity option... " >&6; }
if test -n "$CXX"
then
if test "$GXX" = "yes"
then
- ac_compile_warnings_opt='-Wall'
+ ac_compile_warnings_opt='-W -Wall'
fi
CXXFLAGS="$CXXFLAGS $ac_compile_warnings_opt"
ac_compile_warnings_msg="$ac_compile_warnings_opt for C++"
@@ -3402,12 +3468,12 @@
then
if test "$GCC" = "yes"
then
- ac_compile_warnings_opt='-Wall'
+ ac_compile_warnings_opt='-W -Wall'
fi
CFLAGS="$CFLAGS $ac_compile_warnings_opt"
ac_compile_warnings_msg="$ac_compile_warnings_msg $ac_compile_warnings_opt for C"
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_compile_warnings_msg" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_compile_warnings_msg" >&5
$as_echo "$ac_compile_warnings_msg" >&6; }
unset ac_compile_warnings_msg
unset ac_compile_warnings_opt
@@ -3420,7 +3486,7 @@
# Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then
+if test "${enable_static+set}" = set; then :
enableval=$enable_static; p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
@@ -3457,14 +3523,14 @@
case `pwd` in
*\ * | *\ *)
- { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
esac
-macro_version='2.2.6b'
-macro_revision='1.3017'
+macro_version='2.4'
+macro_revision='1.3293'
@@ -3482,35 +3548,27 @@
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-{ $as_echo "$as_me:$LINENO: checking build system type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
$as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then
+if ${ac_cv_build+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_build_alias=$build_alias
test "x$ac_build_alias" = x &&
ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
- { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
$as_echo "$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-$as_echo "$as_me: error: invalid value of canonical build" >&2;}
- { (exit 1); exit 1; }; };;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
@@ -3526,28 +3584,24 @@
case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-{ $as_echo "$as_me:$LINENO: checking host system type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
$as_echo_n "checking host system type... " >&6; }
-if test "${ac_cv_host+set}" = set; then
+if ${ac_cv_host+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "x$host_alias" = x; then
ac_cv_host=$ac_cv_build
else
ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
$as_echo "$ac_cv_host" >&6; }
case $ac_cv_host in
*-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-$as_echo "$as_me: error: invalid value of canonical host" >&2;}
- { (exit 1); exit 1; }; };;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
esac
host=$ac_cv_host
ac_save_IFS=$IFS; IFS='-'
@@ -3563,6 +3617,75 @@
case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO ""
+}
+
+case "$ECHO" in
+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -3571,9 +3694,9 @@
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
@@ -3584,24 +3707,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { $as_echo "$as_me:$LINENO: result: $CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -3611,9 +3734,9 @@
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
@@ -3624,24 +3747,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="gcc"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
$as_echo "$ac_ct_CC" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -3650,7 +3773,7 @@
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
@@ -3664,9 +3787,9 @@
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
@@ -3677,24 +3800,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { $as_echo "$as_me:$LINENO: result: $CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -3704,9 +3827,9 @@
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
@@ -3718,18 +3841,18 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
if test $ac_prog_rejected = yes; then
@@ -3748,10 +3871,10 @@
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { $as_echo "$as_me:$LINENO: result: $CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -3763,9 +3886,9 @@
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if ${ac_cv_prog_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
@@ -3776,24 +3899,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { $as_echo "$as_me:$LINENO: result: $CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -3807,9 +3930,9 @@
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
@@ -3820,24 +3943,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
$as_echo "$ac_ct_CC" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -3850,7 +3973,7 @@
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
@@ -3861,62 +3984,42 @@
fi
-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }; }
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
# Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
set X $ac_compile
ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -V >&5") 2>&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
+if ${ac_cv_c_compiler_gnu+:} false; then :
$as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -3930,37 +4033,16 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
ac_compiler_gnu=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
+ ac_compiler_gnu=no
fi
-
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
$as_echo "$ac_cv_c_compiler_gnu" >&6; }
if test $ac_compiler_gnu = yes; then
GCC=yes
@@ -3969,20 +4051,16 @@
fi
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
+if ${ac_cv_prog_cc_g+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_save_c_werror_flag=$ac_c_werror_flag
ac_c_werror_flag=yes
ac_cv_prog_cc_g=no
CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -3993,35 +4071,11 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_prog_cc_g=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -4032,82 +4086,33 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
+if ac_fn_c_try_compile "$LINENO"; then :
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cc_g=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int
+main ()
+{
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
fi
-
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_c_werror_flag=$ac_save_c_werror_flag
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
$as_echo "$ac_cv_prog_cc_g" >&6; }
if test "$ac_test_CFLAGS" = set; then
CFLAGS=$ac_save_CFLAGS
@@ -4124,18 +4129,14 @@
CFLAGS=
fi
fi
-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
+if ${ac_cv_prog_cc_c89+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_cv_prog_cc_c89=no
ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
#include
@@ -4192,32 +4193,9 @@
-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_prog_cc_c89=$ac_arg
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
fi
-
rm -f core conftest.err conftest.$ac_objext
test "x$ac_cv_prog_cc_c89" != "xno" && break
done
@@ -4228,17 +4206,19 @@
# AC_CACHE_VAL
case "x$ac_cv_prog_cc_c89" in
x)
- { $as_echo "$as_me:$LINENO: result: none needed" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
$as_echo "none needed" >&6; } ;;
xno)
- { $as_echo "$as_me:$LINENO: result: unsupported" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
$as_echo "unsupported" >&6; } ;;
*)
CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+fi
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
@@ -4248,9 +4228,9 @@
depcc="$CC" am_compiler_list=
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -4358,7 +4338,7 @@
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
@@ -4373,9 +4353,9 @@
fi
-{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${ac_cv_path_SED+set}" = set; then
+if ${ac_cv_path_SED+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
@@ -4383,7 +4363,7 @@
ac_script="$ac_script$as_nl$ac_script"
done
echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
- $as_unset ac_script || ac_script=
+ { ac_script=; unset ac_script;}
if test -z "$SED"; then
ac_path_SED_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
@@ -4392,7 +4372,7 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in sed gsed; do
+ for ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
@@ -4412,7 +4392,7 @@
$as_echo '' >> "conftest.nl"
"$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_SED_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_SED="$ac_path_SED"
@@ -4427,19 +4407,17 @@
$ac_path_SED_found && break 3
done
done
-done
+ done
IFS=$as_save_IFS
if test -z "$ac_cv_path_SED"; then
- { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5
-$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
fi
else
ac_cv_path_SED=$SED
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
$as_echo "$ac_cv_path_SED" >&6; }
SED="$ac_cv_path_SED"
rm -f conftest.sed
@@ -4457,9 +4435,9 @@
-{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
+if ${ac_cv_path_GREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$GREP"; then
@@ -4470,7 +4448,7 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
+ for ac_prog in grep ggrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
@@ -4490,7 +4468,7 @@
$as_echo 'GREP' >> "conftest.nl"
"$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_GREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_GREP="$ac_path_GREP"
@@ -4505,26 +4483,24 @@
$ac_path_GREP_found && break 3
done
done
-done
+ done
IFS=$as_save_IFS
if test -z "$ac_cv_path_GREP"; then
- { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_GREP=$GREP
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
$as_echo "$ac_cv_path_GREP" >&6; }
GREP="$ac_cv_path_GREP"
-{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
$as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
+if ${ac_cv_path_EGREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
@@ -4538,7 +4514,7 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
+ for ac_prog in egrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
@@ -4558,7 +4534,7 @@
$as_echo 'EGREP' >> "conftest.nl"
"$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_EGREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_EGREP="$ac_path_EGREP"
@@ -4573,12 +4549,10 @@
$ac_path_EGREP_found && break 3
done
done
-done
+ done
IFS=$as_save_IFS
if test -z "$ac_cv_path_EGREP"; then
- { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_EGREP=$EGREP
@@ -4586,14 +4560,14 @@
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
$as_echo "$ac_cv_path_EGREP" >&6; }
EGREP="$ac_cv_path_EGREP"
-{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
$as_echo_n "checking for fgrep... " >&6; }
-if test "${ac_cv_path_FGREP+set}" = set; then
+if ${ac_cv_path_FGREP+:} false; then :
$as_echo_n "(cached) " >&6
else
if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
@@ -4607,7 +4581,7 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in fgrep; do
+ for ac_prog in fgrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
@@ -4627,7 +4601,7 @@
$as_echo 'FGREP' >> "conftest.nl"
"$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_FGREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_FGREP="$ac_path_FGREP"
@@ -4642,12 +4616,10 @@
$ac_path_FGREP_found && break 3
done
done
-done
+ done
IFS=$as_save_IFS
if test -z "$ac_cv_path_FGREP"; then
- { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_FGREP=$FGREP
@@ -4655,7 +4627,7 @@
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
$as_echo "$ac_cv_path_FGREP" >&6; }
FGREP="$ac_cv_path_FGREP"
@@ -4681,7 +4653,7 @@
# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
+if test "${with_gnu_ld+set}" = set; then :
withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
else
with_gnu_ld=no
@@ -4690,7 +4662,7 @@
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
case $host in
*-*-mingw*)
@@ -4720,13 +4692,13 @@
;;
esac
elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
- { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
$as_echo_n "checking for non-GNU ld... " >&6; }
fi
-if test "${lt_cv_path_LD+set}" = set; then
+if ${lt_cv_path_LD+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
@@ -4757,18 +4729,16 @@
LD="$lt_cv_path_LD"
if test -n "$LD"; then
- { $as_echo "$as_me:$LINENO: result: $LD" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
$as_echo "$LD" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
- { (exit 1); exit 1; }; }
-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
+if ${lt_cv_prog_gnu_ld+:} false; then :
$as_echo_n "(cached) " >&6
else
# I'd rather use --version here, but apparently some GNU lds only accept -v.
@@ -4781,7 +4751,7 @@
;;
esac
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
$as_echo "$lt_cv_prog_gnu_ld" >&6; }
with_gnu_ld=$lt_cv_prog_gnu_ld
@@ -4793,9 +4763,9 @@
-{ $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
-if test "${lt_cv_path_NM+set}" = set; then
+if ${lt_cv_path_NM+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$NM"; then
@@ -4842,20 +4812,23 @@
: ${lt_cv_path_NM=no}
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
$as_echo "$lt_cv_path_NM" >&6; }
if test "$lt_cv_path_NM" != "no"; then
NM="$lt_cv_path_NM"
else
# Didn't find any BSD compatible name lister, look for dumpbin.
- if test -n "$ac_tool_prefix"; then
- for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in dumpbin "link -dump"
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DUMPBIN+set}" = set; then
+if ${ac_cv_prog_DUMPBIN+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$DUMPBIN"; then
@@ -4866,24 +4839,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
DUMPBIN=$ac_cv_prog_DUMPBIN
if test -n "$DUMPBIN"; then
- { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
$as_echo "$DUMPBIN" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -4893,13 +4866,13 @@
fi
if test -z "$DUMPBIN"; then
ac_ct_DUMPBIN=$DUMPBIN
- for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+ for ac_prog in dumpbin "link -dump"
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_DUMPBIN"; then
@@ -4910,24 +4883,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
if test -n "$ac_ct_DUMPBIN"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
$as_echo "$ac_ct_DUMPBIN" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -4940,7 +4913,7 @@
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
@@ -4948,6 +4921,15 @@
fi
fi
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
if test "$DUMPBIN" != ":"; then
NM="$DUMPBIN"
@@ -4960,44 +4942,44 @@
-{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
$as_echo_n "checking the name lister ($NM) interface... " >&6; }
-if test "${lt_cv_nm_interface+set}" = set; then
+if ${lt_cv_nm_interface+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_nm_interface="BSD nm"
echo "int some_variable = 0;" > conftest.$ac_ext
- (eval echo "\"\$as_me:4970: $ac_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
(eval "$ac_compile" 2>conftest.err)
cat conftest.err >&5
- (eval echo "\"\$as_me:4973: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
(eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
cat conftest.err >&5
- (eval echo "\"\$as_me:4976: output\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
cat conftest.out >&5
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
fi
rm -f conftest*
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
$as_echo "$lt_cv_nm_interface" >&6; }
-{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
$as_echo_n "checking whether ln -s works... " >&6; }
LN_S=$as_ln_s
if test "$LN_S" = "ln -s"; then
- { $as_echo "$as_me:$LINENO: result: yes" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
$as_echo "no, using $LN_S" >&6; }
fi
# find the maximum length of command line arguments
-{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
$as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+if ${lt_cv_sys_max_cmd_len+:} false; then :
$as_echo_n "(cached) " >&6
else
i=0
@@ -5030,6 +5012,11 @@
lt_cv_sys_max_cmd_len=8192;
;;
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
@@ -5094,8 +5081,8 @@
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
@@ -5115,10 +5102,10 @@
fi
if test -n $lt_cv_sys_max_cmd_len ; then
- { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: none" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
$as_echo "none" >&6; }
fi
max_cmd_len=$lt_cv_sys_max_cmd_len
@@ -5132,27 +5119,27 @@
: ${MV="mv -f"}
: ${RM="rm -f"}
-{ $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
# Try some XSI features
xsi_shell=no
( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,, \
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
&& eval 'test $(( 1 + 1 )) -eq 2 \
&& test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
&& xsi_shell=yes
-{ $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
$as_echo "$xsi_shell" >&6; }
-{ $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
lt_shell_append=no
( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
>/dev/null 2>&1 \
&& lt_shell_append=yes
-{ $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
$as_echo "$lt_shell_append" >&6; }
@@ -5187,14 +5174,88 @@
-{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
$as_echo_n "checking for $LD option to reload object files... " >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then
+if ${lt_cv_ld_reload_flag+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_ld_reload_flag='-r'
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
$as_echo "$lt_cv_ld_reload_flag" >&6; }
reload_flag=$lt_cv_ld_reload_flag
case $reload_flag in
@@ -5203,6 +5264,11 @@
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
darwin*)
if test "$GCC" = yes; then
reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
@@ -5223,9 +5289,9 @@
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ac_tool_prefix}objdump; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then
+if ${ac_cv_prog_OBJDUMP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$OBJDUMP"; then
@@ -5236,24 +5302,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
OBJDUMP=$ac_cv_prog_OBJDUMP
if test -n "$OBJDUMP"; then
- { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
$as_echo "$OBJDUMP" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -5263,9 +5329,9 @@
ac_ct_OBJDUMP=$OBJDUMP
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_OBJDUMP"; then
@@ -5276,24 +5342,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_OBJDUMP="objdump"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
if test -n "$ac_ct_OBJDUMP"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
$as_echo "$ac_ct_OBJDUMP" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -5302,7 +5368,7 @@
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
@@ -5322,9 +5388,9 @@
-{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
$as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then
+if ${lt_cv_deplibs_check_method+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_file_magic_cmd='$MAGIC_CMD'
@@ -5366,16 +5432,18 @@
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
-cegcc)
+cegcc*)
# use the weaker test based on 'objdump'. See mingw*.
lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -5405,6 +5473,10 @@
lt_cv_deplibs_check_method=pass_all
;;
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case $host_cpu in
@@ -5413,11 +5485,11 @@
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
;;
hppa*64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
;;
*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
esac
@@ -5439,7 +5511,7 @@
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
lt_cv_deplibs_check_method=pass_all
;;
@@ -5518,8 +5590,23 @@
esac
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -5535,12 +5622,166 @@
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DLLTOOL" = x; then
+ DLLTOOL="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DLLTOOL=$ac_ct_DLLTOOL
+ fi
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+ for ac_prog in ar
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then
+if ${ac_cv_prog_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AR"; then
@@ -5551,36 +5792,40 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AR="${ac_tool_prefix}ar"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
AR=$ac_cv_prog_AR
if test -n "$AR"; then
- { $as_echo "$as_me:$LINENO: result: $AR" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
$as_echo "$AR" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
+ test -n "$AR" && break
+ done
fi
-if test -z "$ac_cv_prog_AR"; then
+if test -z "$AR"; then
ac_ct_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+ for ac_prog in ar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_AR"; then
@@ -5591,48 +5836,108 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_AR="ar"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
ac_ct_AR=$ac_cv_prog_ac_ct_AR
if test -n "$ac_ct_AR"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
$as_echo "$ac_ct_AR" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
+
+ test -n "$ac_ct_AR" && break
+done
+
if test "x$ac_ct_AR" = x; then
AR="false"
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
AR=$ac_ct_AR
fi
-else
- AR="$ac_cv_prog_AR"
fi
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ar_at_file=no
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
@@ -5643,9 +5948,9 @@
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
+if ${ac_cv_prog_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$STRIP"; then
@@ -5656,24 +5961,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
$as_echo "$STRIP" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -5683,9 +5988,9 @@
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_STRIP"; then
@@ -5696,24 +6001,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
$as_echo "$ac_ct_STRIP" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -5722,7 +6027,7 @@
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
@@ -5742,9 +6047,9 @@
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
+if ${ac_cv_prog_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$RANLIB"; then
@@ -5755,24 +6060,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
RANLIB=$ac_cv_prog_RANLIB
if test -n "$RANLIB"; then
- { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
$as_echo "$RANLIB" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -5782,9 +6087,9 @@
ac_ct_RANLIB=$RANLIB
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_RANLIB"; then
@@ -5795,24 +6100,24 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_RANLIB="ranlib"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
if test -n "$ac_ct_RANLIB"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
$as_echo "$ac_ct_RANLIB" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -5821,7 +6126,7 @@
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
@@ -5855,276 +6160,24 @@
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Define system-specific variables.
case $host_os in
-aix*)
- symcode='[BCDT]'
- ;;
-cygwin* | mingw* | pw32* | cegcc*)
- symcode='[ABCDGISTW]'
- ;;
-hpux*)
- if test "$host_cpu" = ia64; then
- symcode='[ABCDEGRST]'
- fi
- ;;
-irix* | nonstopux*)
- symcode='[BCDEGRST]'
- ;;
-osf*)
- symcode='[BCDEGQRST]'
- ;;
-solaris*)
- symcode='[BDRT]'
- ;;
-sco3.2v5*)
- symcode='[DT]'
- ;;
-sysv4.2uw2*)
- symcode='[DT]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[ABDT]'
- ;;
-sysv4)
- symcode='[DFNSTU]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[ABCDGIRSTW]' ;;
-esac
-
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
esac
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
-
- # Write the raw and C identifiers.
- if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
- # Also find C++ and __fastcall symbols from MSVC++,
- # which start with @ or ?.
- lt_cv_sys_global_symbol_pipe="$AWK '"\
-" {last_section=section; section=\$ 3};"\
-" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-" \$ 0!~/External *\|/{next};"\
-" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-" ' prfx=^$ac_symprfx"
- else
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
- fi
-
- # Check to see that the pipe works correctly.
- pipe_works=no
- rm -f conftest*
- cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
- # Make sure that we snagged all the symbols we need.
- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<_LT_EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-_LT_EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
- cat <<_LT_EOF >> conftest.$ac_ext
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- void *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[] =
-{
- { "@PROGRAM@", (void *) 0 },
-_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
- cat <<\_LT_EOF >> conftest.$ac_ext
- {0, (void *) 0}
-};
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&5
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- fi
- rm -rf conftest* conftst*
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- { $as_echo "$as_me:$LINENO: result: failed" >&5
-$as_echo "failed" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: ok" >&5
-$as_echo "ok" >&6; }
-fi
@@ -6148,690 +6201,281 @@
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval=$enable_libtool_lock;
-fi
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line 6182 "configure"' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
- ;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*|s390*-*tpf*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-int
-main ()
-{
+# Allow CC to be a program name with arguments.
+compiler=$CC
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- lt_cv_cc_needs_belf=yes
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- lt_cv_cc_needs_belf=no
-fi
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-$as_echo "$lt_cv_cc_needs_belf" >&6; }
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *)
- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
- LD="${LD-ld} -64"
- fi
- ;;
- esac
- ;;
- esac
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
fi
- rm -rf conftest*
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
;;
esac
-need_locks="$enable_libtool_lock"
-
-
- case $host_os in
- rhapsody* | darwin*)
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$DSYMUTIL"; then
- ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-DSYMUTIL=$ac_cv_prog_DSYMUTIL
-if test -n "$DSYMUTIL"; then
- { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
-$as_echo "$DSYMUTIL" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-fi
-if test -z "$ac_cv_prog_DSYMUTIL"; then
- ac_ct_DSYMUTIL=$DSYMUTIL
- # Extract the first word of "dsymutil", so it can be a program name with args.
-set dummy dsymutil; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_DSYMUTIL"; then
- ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-fi
-fi
-ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
-if test -n "$ac_ct_DSYMUTIL"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
-$as_echo "$ac_ct_DSYMUTIL" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
- if test "x$ac_ct_DSYMUTIL" = x; then
- DSYMUTIL=":"
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- DSYMUTIL=$ac_ct_DSYMUTIL
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
-else
- DSYMUTIL="$ac_cv_prog_DSYMUTIL"
-fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
-set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NMEDIT+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$NMEDIT"; then
- ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
+ # Check to see that the pipe works correctly.
+ pipe_works=no
-fi
-fi
-NMEDIT=$ac_cv_prog_NMEDIT
-if test -n "$NMEDIT"; then
- { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5
-$as_echo "$NMEDIT" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
-fi
-if test -z "$ac_cv_prog_NMEDIT"; then
- ac_ct_NMEDIT=$NMEDIT
- # Extract the first word of "nmedit", so it can be a program name with args.
-set dummy nmedit; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_NMEDIT"; then
- ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_NMEDIT="nmedit"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
+#ifdef __cplusplus
+extern "C" {
+#endif
-fi
-fi
-ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
-if test -n "$ac_ct_NMEDIT"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
-$as_echo "$ac_ct_NMEDIT" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
- if test "x$ac_ct_NMEDIT" = x; then
- NMEDIT=":"
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- NMEDIT=$ac_ct_NMEDIT
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
fi
-else
- NMEDIT="$ac_cv_prog_NMEDIT"
-fi
+ rm -rf conftest* conftst*
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
-set dummy ${ac_tool_prefix}lipo; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_LIPO+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$LIPO"; then
- ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
fi
done
-done
-IFS=$as_save_IFS
fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
fi
-LIPO=$ac_cv_prog_LIPO
-if test -n "$LIPO"; then
- { $as_echo "$as_me:$LINENO: result: $LIPO" >&5
-$as_echo "$LIPO" >&6; }
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
fi
-
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+ nm_file_list_spec='@'
fi
-if test -z "$ac_cv_prog_LIPO"; then
- ac_ct_LIPO=$LIPO
- # Extract the first word of "lipo", so it can be a program name with args.
-set dummy lipo; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_LIPO"; then
- ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_LIPO="lipo"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-fi
-fi
-ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
-if test -n "$ac_ct_LIPO"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5
-$as_echo "$ac_ct_LIPO" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
- if test "x$ac_ct_LIPO" = x; then
- LIPO=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- LIPO=$ac_ct_LIPO
- fi
-else
- LIPO="$ac_cv_prog_LIPO"
-fi
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}otool; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OTOOL"; then
- ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-fi
-fi
-OTOOL=$ac_cv_prog_OTOOL
-if test -n "$OTOOL"; then
- { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-fi
-if test -z "$ac_cv_prog_OTOOL"; then
- ac_ct_OTOOL=$OTOOL
- # Extract the first word of "otool", so it can be a program name with args.
-set dummy otool; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_OTOOL"; then
- ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_OTOOL="otool"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-fi
-fi
-ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
-if test -n "$ac_ct_OTOOL"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5
-$as_echo "$ac_ct_OTOOL" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
- if test "x$ac_ct_OTOOL" = x; then
- OTOOL=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- OTOOL=$ac_ct_OTOOL
- fi
-else
- OTOOL="$ac_cv_prog_OTOOL"
-fi
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
-set dummy ${ac_tool_prefix}otool64; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL64+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OTOOL64"; then
- ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-fi
-fi
-OTOOL64=$ac_cv_prog_OTOOL64
-if test -n "$OTOOL64"; then
- { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5
-$as_echo "$OTOOL64" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-fi
-if test -z "$ac_cv_prog_OTOOL64"; then
- ac_ct_OTOOL64=$OTOOL64
- # Extract the first word of "otool64", so it can be a program name with args.
-set dummy otool64; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_OTOOL64"; then
- ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_OTOOL64="otool64"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-IFS=$as_save_IFS
-fi
-fi
-ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
-if test -n "$ac_ct_OTOOL64"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5
-$as_echo "$ac_ct_OTOOL64" >&6; }
-else
- { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
- if test "x$ac_ct_OTOOL64" = x; then
- OTOOL64=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- OTOOL64=$ac_ct_OTOOL64
- fi
-else
- OTOOL64="$ac_cv_prog_OTOOL64"
-fi
@@ -6845,63 +6489,179 @@
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+ withval=$with_sysroot;
+else
+ with_sysroot=no
+fi
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+ as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+ ;;
+esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
+fi
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
- { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
-$as_echo_n "checking for -single_module linker flag... " >&6; }
-if test "${lt_cv_apple_cc_single_mod+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
- # By default we will add the -single_module flag. You can override
- # by either setting the environment variable LT_MULTI_MODULE
- # non-empty at configure time, or by adding -multi_module to the
- # link flags.
- rm -rf libconftest.dylib*
- echo "int foo(void){return 1;}" > conftest.c
- echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&5
- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
- -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
- _lt_result=$?
- if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
- lt_cv_apple_cc_single_mod=yes
- else
- cat conftest.err >&5
- fi
- rm -rf libconftest.dylib*
- rm -f conftest.*
- fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
-$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
- { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
-$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
$as_echo_n "(cached) " >&6
else
- lt_cv_ld_exported_symbols_list=no
- save_LDFLAGS=$LDFLAGS
- echo "_main" > conftest.sym
- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -6912,934 +6672,699 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- lt_cv_ld_exported_symbols_list=yes
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_cc_needs_belf=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- lt_cv_ld_exported_symbols_list=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
-
+ lt_cv_cc_needs_belf=no
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
-$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
- case $host_os in
- rhapsody* | darwin1.[012])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
- darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- darwin*) # darwin 5.x on
- # if running on 10.5 or later, the deployment target defaults
- # to the OS version, if on x86, and 10.4, the deployment
- # target defaults to 10.4. Don't you love it?
- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
- 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[012]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- 10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- esac
- ;;
- esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
- _lt_dar_single_mod='$single_module'
- fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
- else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- if test "$DSYMUTIL" != ":"; then
- _lt_dsymutil='~$DSYMUTIL $lib || :'
- else
- _lt_dsymutil=
- fi
- ;;
- esac
-
-ac_ext=c
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer to if __STDC__ is defined, since
- # exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include
-#else
-# include
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- # Broken: fails on valid input.
-continue
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
-rm -f conftest.err conftest.$ac_ext
+need_locks="$enable_libtool_lock"
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ if test -n "$MANIFEST_TOOL"; then
+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- # Passes both tests.
-ac_preproc_ok=:
-break
fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
- done
- ac_cv_prog_CPP=$CPP
fi
- CPP=$ac_cv_prog_CPP
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+ # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer to if __STDC__ is defined, since
- # exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include
-#else
-# include
-#endif
- Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
+ if test -n "$ac_ct_MANIFEST_TOOL"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- # Broken: fails on valid input.
-continue
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
+ if test "x$ac_ct_MANIFEST_TOOL" = x; then
+ MANIFEST_TOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then
- # Broken: success on invalid input.
-continue
+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+ fi
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }; }
+ lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&5
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include
-#include
-#include
-#include
-int
-main ()
-{
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_header_stdc=yes
+
+ case $host_os in
+ rhapsody* | darwin*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ if test -n "$DSYMUTIL"; then
+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- ac_cv_header_stdc=no
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DSYMUTIL"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
else
- ac_cv_header_stdc=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
-rm -f conftest*
+ if test "x$ac_ct_DSYMUTIL" = x; then
+ DSYMUTIL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DSYMUTIL=$ac_ct_DSYMUTIL
+ fi
+else
+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
fi
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NMEDIT"; then
+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
else
- ac_cv_header_stdc=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
-rm -f conftest*
+
fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_NMEDIT"; then
+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include
-#include
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
+ if test "x$ac_ct_NMEDIT" = x; then
+ NMEDIT=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
+ NMEDIT=$ac_ct_NMEDIT
+ fi
else
- $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+ NMEDIT="$ac_cv_prog_NMEDIT"
fi
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+ ac_ct_LIPO=$LIPO
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
$as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- eval "$as_ac_Header=yes"
+ if test -n "$ac_ct_LIPO"; then
+ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_LIPO="lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- eval "$as_ac_Header=no"
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'`
- if test "x$as_val" = x""yes; then
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+ if test "x$ac_ct_LIPO" = x; then
+ LIPO=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ LIPO=$ac_ct_LIPO
+ fi
+else
+ LIPO="$ac_cv_prog_LIPO"
fi
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL"; then
+ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
done
+ done
+IFS=$as_save_IFS
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
-for ac_header in dlfcn.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+ ac_ct_OTOOL=$OTOOL
+ # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
$as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- eval "$as_ac_Header=yes"
+ if test -n "$ac_ct_OTOOL"; then
+ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OTOOL="otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- eval "$as_ac_Header=no"
fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_Header'}
- $as_echo "$as_val"'`
- if test "x$as_val" = x""yes; then
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
-done
-
-
-
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -z "$CXX"; then
- if test -n "$CCC"; then
- CXX=$CCC
+ if test "x$ac_ct_OTOOL" = x; then
+ OTOOL=":"
else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL=$ac_ct_OTOOL
+ fi
+else
+ OTOOL="$ac_cv_prog_OTOOL"
+fi
+
if test -n "$ac_tool_prefix"; then
- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then
+if ${ac_cv_prog_OTOOL64+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$CXX"; then
- ac_cv_prog_CXX="$CXX" # Let the user override the test.
+ if test -n "$OTOOL64"; then
+ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
- { $as_echo "$as_me:$LINENO: result: $CXX" >&5
-$as_echo "$CXX" >&6; }
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
- test -n "$CXX" && break
- done
fi
-if test -z "$CXX"; then
- ac_ct_CXX=$CXX
- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+if test -z "$ac_cv_prog_OTOOL64"; then
+ ac_ct_OTOOL64=$OTOOL64
+ # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -n "$ac_ct_CXX"; then
- ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+ if test -n "$ac_ct_OTOOL64"; then
+ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CXX="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ ac_cv_prog_ac_ct_OTOOL64="otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-$as_echo "$ac_ct_CXX" >&6; }
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
-
- test -n "$ac_ct_CXX" && break
-done
-
- if test "x$ac_ct_CXX" = x; then
- CXX="g++"
+ if test "x$ac_ct_OTOOL64" = x; then
+ OTOOL64=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
- CXX=$ac_ct_CXX
+ OTOOL64=$ac_ct_OTOOL64
fi
+else
+ OTOOL64="$ac_cv_prog_OTOOL64"
fi
- fi
-fi
-# Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -v >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_compiler_gnu=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GXX=yes
-else
- GXX=
-fi
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-$as_echo_n "checking whether $CXX accepts -g... " >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_save_cxx_werror_flag=$ac_cxx_werror_flag
- ac_cxx_werror_flag=yes
- ac_cv_prog_cxx_g=no
- CXXFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-int
-main ()
-{
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cxx_g=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- CXXFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-int
-main ()
-{
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
- ac_cxx_werror_flag=$ac_save_cxx_werror_flag
- CXXFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -7850,210 +7375,105 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- ac_cv_prog_cxx_g=yes
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_ld_exported_symbols_list=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ lt_cv_ld_exported_symbols_list=no
fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-$as_echo "$ac_cv_prog_cxx_g" >&6; }
-if test "$ac_test_CXXFLAGS" = set; then
- CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
- if test "$GXX" = yes; then
- CXXFLAGS="-g -O2"
- else
- CXXFLAGS="-g"
- fi
-else
- if test "$GXX" = yes; then
- CXXFLAGS="-O2"
- else
- CXXFLAGS=
- fi
fi
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-depcc="$CXX" am_compiler_list=
-
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CXX_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- am__universal=false
- case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
+ lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
+ echo "$RANLIB libconftest.a" >&5
+ $RANLIB libconftest.a 2>&5
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
+ lt_cv_ld_force_load=yes
else
- break
- fi
- ;;
- msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CXX_dependencies_compiler_type=$depmode
- break
+ cat conftest.err >&5
fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CXX_dependencies_compiler_type=none
-fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
-CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[012]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
- am__fastdepCXX_TRUE=
- am__fastdepCXX_FALSE='#'
-else
- am__fastdepCXX_TRUE='#'
- am__fastdepCXX_FALSE=
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
fi
-
-
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
-if test -z "$CXXCPP"; then
- if test "${ac_cv_prog_CXXCPP+set}" = set; then
+if test -z "$CPP"; then
+ if ${ac_cv_prog_CPP+:} false; then :
$as_echo_n "(cached) " >&6
else
- # Double quotes because CXXCPP needs to be expanded
- for CXXCPP in "$CXX -E" "/lib/cpp"
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
do
ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
+for ac_c_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
@@ -8061,11 +7481,7 @@
# exists even on freestanding compilers.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#ifdef __STDC__
# include
@@ -8074,93 +7490,49 @@
#endif
Syntax error
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_cpp "$LINENO"; then :
+else
# Broken: fails on valid input.
continue
fi
-
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
+if ac_fn_c_try_cpp "$LINENO"; then :
# Broken: success on invalid input.
continue
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
# Passes both tests.
ac_preproc_ok=:
break
fi
-
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
break
fi
done
- ac_cv_prog_CXXCPP=$CXXCPP
+ ac_cv_prog_CPP=$CPP
fi
- CXXCPP=$ac_cv_prog_CXXCPP
+ CPP=$ac_cv_prog_CPP
else
- ac_cv_prog_CXXCPP=$CXXCPP
+ ac_cv_prog_CPP=$CPP
fi
-{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5
-$as_echo "$CXXCPP" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
+for ac_c_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
@@ -8168,11 +7540,7 @@
# exists even on freestanding compilers.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#ifdef __STDC__
# include
@@ -8181,95 +7549,201 @@
#endif
Syntax error
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_cpp "$LINENO"; then :
+else
# Broken: fails on valid input.
continue
fi
-
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null && {
- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- }; then
+if ac_fn_c_try_cpp "$LINENO"; then :
# Broken: success on invalid input.
continue
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
# Passes both tests.
ac_preproc_ok=:
break
fi
-
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
else
- { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-_lt_caught_CXX_error=yes; }
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
fi
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- _lt_caught_CXX_error=yes
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+#include
+#include
+#include
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+#include
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
fi
+done
+
+
+
+func_stripname_cnf ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname_cnf
+
@@ -8285,7 +7759,7 @@
# Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
+if test "${enable_shared+set}" = set; then :
enableval=$enable_shared; p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
@@ -8318,7 +7792,7 @@
# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then
+if test "${with_pic+set}" = set; then :
withval=$with_pic; pic_mode="$withval"
else
pic_mode=default
@@ -8334,7 +7808,7 @@
# Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
+if test "${enable_fast_install+set}" = set; then :
enableval=$enable_fast_install; p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
@@ -8396,6 +7870,7 @@
+
test -z "$LN_S" && LN_S="ln -s"
@@ -8415,9 +7890,9 @@
setopt NO_GLOB_SUBST
fi
-{ $as_echo "$as_me:$LINENO: checking for objdir" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
$as_echo_n "checking for objdir... " >&6; }
-if test "${lt_cv_objdir+set}" = set; then
+if ${lt_cv_objdir+:} false; then :
$as_echo_n "(cached) " >&6
else
rm -f .libs 2>/dev/null
@@ -8430,7 +7905,7 @@
fi
rmdir .libs 2>/dev/null
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
$as_echo "$lt_cv_objdir" >&6; }
objdir=$lt_cv_objdir
@@ -8445,19 +7920,6 @@
-
-
-
-
-
-
-
-
-
-
-
-
-
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
@@ -8470,23 +7932,6 @@
;;
esac
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
# Global variables:
ofile=libtool
can_build_shared=yes
@@ -8515,7 +7960,7 @@
*) break;;
esac
done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
# Only perform the check for file, if the check method requires it
@@ -8523,9 +7968,9 @@
case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
$as_echo_n "(cached) " >&6
else
case $MAGIC_CMD in
@@ -8576,10 +8021,10 @@
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -8589,9 +8034,9 @@
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
- { $as_echo "$as_me:$LINENO: checking for file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
$as_echo_n "checking for file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
$as_echo_n "(cached) " >&6
else
case $MAGIC_CMD in
@@ -8642,10 +8087,10 @@
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -8724,11 +8169,16 @@
lt_prog_compiler_no_builtin_flag=
if test "$GCC" = yes; then
- lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+ case $cc_basename in
+ nvcc*)
+ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+ *)
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+ esac
- { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_rtti_exceptions=no
@@ -8744,15 +8194,15 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:8747: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:8751: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_rtti_exceptions=yes
@@ -8761,7 +8211,7 @@
$RM conftest*
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
@@ -8781,8 +8231,6 @@
lt_prog_compiler_pic=
lt_prog_compiler_static=
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
if test "$GCC" = yes; then
lt_prog_compiler_wl='-Wl,'
@@ -8830,6 +8278,12 @@
lt_prog_compiler_pic='-fno-common'
;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static=
+ ;;
+
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
@@ -8872,6 +8326,13 @@
lt_prog_compiler_pic='-fPIC'
;;
esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ lt_prog_compiler_wl='-Xlinker '
+ lt_prog_compiler_pic='-Xcompiler -fPIC'
+ ;;
+ esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
@@ -8913,7 +8374,7 @@
lt_prog_compiler_static='-non_shared'
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
case $cc_basename in
# old Intel for x86_64 which still supported -KPIC.
ecc*)
@@ -8934,7 +8395,13 @@
lt_prog_compiler_pic='--shared'
lt_prog_compiler_static='--static'
;;
- pgcc* | pgf77* | pgf90* | pgf95*)
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
lt_prog_compiler_wl='-Wl,'
@@ -8946,25 +8413,25 @@
# All Alpha code is PIC.
lt_prog_compiler_static='-non_shared'
;;
- xl*)
- # IBM XL C 8.0/Fortran 10.1 on PPC
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-qpic'
lt_prog_compiler_static='-qstaticlink'
;;
*)
case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
+ *Sun\ F* | *Sun*Fortran*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_wl=''
;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ *Sun\ C*)
+ # Sun C 5.9
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl=''
+ lt_prog_compiler_wl='-Wl,'
;;
esac
;;
@@ -8996,7 +8463,7 @@
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
case $cc_basename in
- f77* | f90* | f95*)
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
lt_prog_compiler_wl='-Qoption ld ';;
*)
lt_prog_compiler_wl='-Wl,';;
@@ -9053,21 +8520,25 @@
lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
;;
esac
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-$as_echo "$lt_prog_compiler_pic" >&6; }
-
-
-
-
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
#
# Check to make sure the PIC flag actually works.
#
if test -n "$lt_prog_compiler_pic"; then
- { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_pic_works=no
@@ -9083,15 +8554,15 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:9086: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:9090: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_pic_works=yes
@@ -9100,7 +8571,7 @@
$RM conftest*
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
@@ -9120,13 +8591,18 @@
+
+
+
+
+
#
# Check to make sure the static flag actually works.
#
wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works+set}" = set; then
+if ${lt_cv_prog_compiler_static_works+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_static_works=no
@@ -9139,7 +8615,7 @@
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_static_works=yes
@@ -9152,7 +8628,7 @@
LDFLAGS="$save_LDFLAGS"
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
if test x"$lt_cv_prog_compiler_static_works" = xyes; then
@@ -9167,9 +8643,9 @@
- { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+if ${lt_cv_prog_compiler_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_c_o=no
@@ -9188,16 +8664,16 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:9191: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:9195: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o=yes
@@ -9214,7 +8690,7 @@
$RM conftest*
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
@@ -9222,9 +8698,9 @@
- { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+if ${lt_cv_prog_compiler_c_o+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_c_o=no
@@ -9243,16 +8719,16 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:9246: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:9250: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o=yes
@@ -9269,7 +8745,7 @@
$RM conftest*
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
@@ -9278,7 +8754,7 @@
hard_links="nottested"
if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
$as_echo_n "checking if we can lock with hard links... " >&6; }
hard_links=yes
$RM conftest*
@@ -9286,10 +8762,10 @@
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
$as_echo "$hard_links" >&6; }
if test "$hard_links" = no; then
- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
need_locks=warn
fi
@@ -9302,7 +8778,7 @@
- { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
runpath_var=
@@ -9365,7 +8841,33 @@
esac
ld_shlibs=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+ *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -9383,6 +8885,7 @@
fi
supports_anon_versioning=no
case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
*\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -9398,11 +8901,12 @@
ld_shlibs=no
cat <<_LT_EOF 1>&2
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
_LT_EOF
fi
@@ -9438,10 +8942,12 @@
# _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
+ export_dynamic_flag_spec='${wl}--export-all-symbols'
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -9459,6 +8965,11 @@
fi
;;
+ haiku*)
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs=yes
+ ;;
+
interix[3-9]*)
hardcode_direct=no
hardcode_shlibpath_var=no
@@ -9474,7 +8985,7 @@
archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- gnu* | linux* | tpf* | k*bsd*-gnu)
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
if test "$host_os" = linux-dietlibc; then
case $cc_basename in
@@ -9484,15 +8995,16 @@
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
&& test "$tmp_diet" = no
then
- tmp_addflag=
+ tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@@ -9503,13 +9015,17 @@
lf95*) # Lahey Fortran 8.1
whole_archive_flag_spec=
tmp_sharedflag='--shared' ;;
- xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ ;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
compiler_needs_object=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
@@ -9525,17 +9041,17 @@
fi
case $cc_basename in
- xlf*)
+ xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
hardcode_libdir_flag_spec=
hardcode_libdir_flag_spec_ld='-rpath $libdir'
- archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
if test "x$supports_anon_versioning" = xyes; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
@@ -9549,8 +9065,8 @@
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
@@ -9568,8 +9084,8 @@
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -9615,8 +9131,8 @@
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -9656,8 +9172,10 @@
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
@@ -9744,11 +9262,13 @@
allow_undefined_flag='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -9759,54 +9279,34 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
+if ac_fn_c_try_link "$LINENO"; then :
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
fi
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
fi
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ aix_libpath=$lt_cv_aix_libpath_
+fi
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
@@ -9815,11 +9315,13 @@
else
# Determine the default libpath from the value encoded in an
# empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -9830,59 +9332,44 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
+if ac_fn_c_try_link "$LINENO"; then :
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
fi
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_="/usr/lib:/lib"
+ fi
fi
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ aix_libpath=$lt_cv_aix_libpath_
+fi
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
no_undefined_flag=' ${wl}-bernotok'
allow_undefined_flag=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec='$convenience'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ fi
archive_cmds_need_lc=yes
# This is similar to how AIX traditionally builds its shared libraries.
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
@@ -9914,20 +9401,63 @@
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_from_new_cmds='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
- enable_shared_with_static_runtimes=yes
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ file_list_spec='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ old_postinstall_cmds='chmod 644 $oldlib'
+ postlink_cmds='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ enable_shared_with_static_runtimes=yes
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -9937,7 +9467,11 @@
hardcode_direct=no
hardcode_automatic=yes
hardcode_shlibpath_var=unsupported
- whole_archive_flag_spec=''
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ else
+ whole_archive_flag_spec=''
+ fi
link_all_deplibs=yes
allow_undefined_flag="$_lt_dar_allow_undefined"
case $cc_basename in
@@ -9945,7 +9479,7 @@
*) _lt_dar_can_shared=$GCC ;;
esac
if test "$_lt_dar_can_shared" = "yes"; then
- output_verbose_link_cmd=echo
+ output_verbose_link_cmd=func_echo_all
archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -9988,7 +9522,7 @@
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | dragonfly*)
- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
@@ -9996,7 +9530,7 @@
hpux9*)
if test "$GCC" = yes; then
- archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
@@ -10011,8 +9545,8 @@
;;
hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -10030,16 +9564,16 @@
;;
hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
case $host_cpu in
hppa*64*)
archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
@@ -10051,7 +9585,46 @@
archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler__b=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -b"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler__b=yes
+ fi
+ else
+ lt_cv_prog_compiler__b=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
;;
esac
fi
@@ -10079,52 +9652,39 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
- cat >conftest.$ac_ext <<_ACEOF
-int foo(void) {}
+ # This should be the same for all languages, so no per-tag cache variable.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int foo (void) { return 0; }
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_irix_exported_symbol=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
+ lt_cv_irix_exported_symbol=no
fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
fi
archive_cmds_need_lc='no'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
@@ -10186,17 +9746,17 @@
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
- archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
fi
archive_cmds_need_lc='no'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
@@ -10206,13 +9766,13 @@
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
@@ -10225,9 +9785,9 @@
no_undefined_flag=' -z defs'
if test "$GCC" = yes; then
wlarc='${wl}'
- archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
@@ -10376,7 +9936,7 @@
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
$as_echo "$ld_shlibs" >&6; }
test "$ld_shlibs" = no && can_build_shared=no
@@ -10413,46 +9973,52 @@
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
- $RM conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl
- pic_flag=$lt_prog_compiler_pic
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag
- allow_undefined_flag=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
(eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc=no
- else
- archive_cmds_need_lc=yes
- fi
- allow_undefined_flag=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $RM conftest*
- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-$as_echo "$archive_cmds_need_lc" >&6; }
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+ lt_cv_archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
;;
esac
fi
@@ -10615,7 +10181,7 @@
- { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
$as_echo_n "checking dynamic linker characteristics... " >&6; }
if test "$GCC" = yes; then
@@ -10623,16 +10189,23 @@
darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
*) lt_awk_arg="/^libraries:/" ;;
esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
# Ok, now we have the path, separated by spaces, we can step through it
# and add multilib dir if necessary.
lt_tmp_lt_search_path_spec=
@@ -10645,7 +10218,7 @@
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
BEGIN {RS=" "; FS="/|\n";} {
lt_foo="";
lt_count=0;
@@ -10665,7 +10238,13 @@
if (lt_foo != "") { lt_freq[lt_foo]++; }
if (lt_freq[lt_foo] == 1) { print lt_foo; }
}'`
- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi
@@ -10753,7 +10332,7 @@
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
@@ -10784,8 +10363,9 @@
need_version=no
need_lib_prefix=no
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
@@ -10806,36 +10386,83 @@
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
;;
esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
;;
*)
+ # Assume MSVC wrapper
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
;;
esac
- dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
@@ -10922,6 +10549,19 @@
hardcode_into_libs=yes
;;
+haiku*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
@@ -10964,8 +10604,10 @@
soname_spec='${libname}${release}${shared_ext}$major'
;;
esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
;;
interix[3-9]*)
@@ -11023,7 +10665,7 @@
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -11032,16 +10674,17 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
+
# Some binutils ld are patched to set DT_RUNPATH
- save_LDFLAGS=$LDFLAGS
- save_libdir=$libdir
- eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
- LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -11052,43 +10695,19 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
- shlibpath_overrides_runpath=yes
+if ac_fn_c_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
fi
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
fi
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS=$save_LDFLAGS
- libdir=$save_libdir
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
@@ -11100,8 +10719,9 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -11301,7 +10921,7 @@
dynamic_linker=no
;;
esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
$as_echo "$dynamic_linker" >&6; }
test "$dynamic_linker" = no && can_build_shared=no
@@ -11403,7 +11023,12 @@
- { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" ||
@@ -11428,7 +11053,7 @@
# directories.
hardcode_action=unsupported
fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
$as_echo "$hardcode_action" >&6; }
if test "$hardcode_action" = relink ||
@@ -11473,111 +11098,15 @@
darwin*)
# if libdl is installed we need to link against it
- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_lib_dl_dlopen=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dl_dlopen=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
-
-fi
-
- ;;
-
- *)
- { $as_echo "$as_me:$LINENO: checking for shl_load" >&5
-$as_echo_n "checking for shl_load... " >&6; }
-if test "${ac_cv_func_shl_load+set}" = set; then
+if ${ac_cv_lib_dl_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-/* Define shl_load to an innocuous variant, in case declares shl_load.
- For example, HP-UX 11i declares gettimeofday. */
-#define shl_load innocuous_shl_load
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shl_load (); below.
- Prefer to if __STDC__ is defined, since
- exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include
-#else
-# include
-#endif
-
-#undef shl_load
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
@@ -11585,72 +11114,51 @@
#ifdef __cplusplus
extern "C"
#endif
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_shl_load || defined __stub___shl_load
-choke me
-#endif
-
+char dlopen ();
int
main ()
{
-return shl_load ();
+return dlopen ();
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_func_shl_load=yes
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_shl_load=no
+ ac_cv_lib_dl_dlopen=no
fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-$as_echo "$ac_cv_func_shl_load" >&6; }
-if test "x$ac_cv_func_shl_load" = x""yes; then
+
+ ;;
+
+ *)
+ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
lt_cv_dlopen="shl_load"
else
- { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
$as_echo_n "checking for shl_load in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+if ${ac_cv_lib_dld_shl_load+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
@@ -11668,145 +11176,32 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
+if ac_fn_c_try_link "$LINENO"; then :
ac_cv_lib_dld_shl_load=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dld_shl_load=no
+ ac_cv_lib_dld_shl_load=no
fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test "x$ac_cv_lib_dld_shl_load" = x""yes; then
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
else
- { $as_echo "$as_me:$LINENO: checking for dlopen" >&5
-$as_echo_n "checking for dlopen... " >&6; }
-if test "${ac_cv_func_dlopen+set}" = set; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define dlopen to an innocuous variant, in case declares dlopen.
- For example, HP-UX 11i declares gettimeofday. */
-#define dlopen innocuous_dlopen
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char dlopen (); below.
- Prefer to if __STDC__ is defined, since
- exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include
-#else
-# include
-#endif
-
-#undef dlopen
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_dlopen || defined __stub___dlopen
-choke me
-#endif
-
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- ac_cv_func_dlopen=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_func_dlopen=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-$as_echo "$ac_cv_func_dlopen" >&6; }
-if test "x$ac_cv_func_dlopen" = x""yes; then
+ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
lt_cv_dlopen="dlopen"
else
- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+if ${ac_cv_lib_dl_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
@@ -11824,57 +11219,28 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
+if ac_fn_c_try_link "$LINENO"; then :
ac_cv_lib_dl_dlopen=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dl_dlopen=no
+ ac_cv_lib_dl_dlopen=no
fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
- { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
$as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+if ${ac_cv_lib_svld_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lsvld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
@@ -11892,57 +11258,28 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
+if ac_fn_c_try_link "$LINENO"; then :
ac_cv_lib_svld_dlopen=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_svld_dlopen=no
+ ac_cv_lib_svld_dlopen=no
fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test "x$ac_cv_lib_svld_dlopen" = x""yes; then
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
else
- { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
$as_echo_n "checking for dld_link in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+if ${ac_cv_lib_dld_dld_link+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
@@ -11960,43 +11297,18 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
+if ac_fn_c_try_link "$LINENO"; then :
ac_cv_lib_dld_dld_link=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dld_dld_link=no
+ ac_cv_lib_dld_dld_link=no
fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test "x$ac_cv_lib_dld_dld_link" = x""yes; then
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
fi
@@ -12035,9 +11347,9 @@
save_LIBS="$LIBS"
LIBS="$lt_cv_dlopen_libs $LIBS"
- { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
$as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then
+if ${lt_cv_dlopen_self+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "$cross_compiling" = yes; then :
@@ -12046,7 +11358,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12049 "configure"
+#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12087,7 +11399,13 @@
# endif
#endif
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -12096,7 +11414,11 @@
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
/* dlclose (self); */
}
else
@@ -12105,11 +11427,11 @@
return status;
}
_LT_EOF
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
(eval $ac_link) 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -12126,14 +11448,14 @@
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
$as_echo "$lt_cv_dlopen_self" >&6; }
if test "x$lt_cv_dlopen_self" = xyes; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then
+if ${lt_cv_dlopen_self_static+:} false; then :
$as_echo_n "(cached) " >&6
else
if test "$cross_compiling" = yes; then :
@@ -12142,7 +11464,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12145 "configure"
+#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12183,7 +11505,13 @@
# endif
#endif
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -12192,7 +11520,11 @@
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
/* dlclose (self); */
}
else
@@ -12201,11 +11533,11 @@
return status;
}
_LT_EOF
- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
(eval $ac_link) 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -12222,7 +11554,7 @@
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
$as_echo "$lt_cv_dlopen_self_static" >&6; }
fi
@@ -12261,12 +11593,12 @@
striplib=
old_striplib=
-{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
$as_echo_n "checking whether stripping libraries is possible... " >&6; }
if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- { $as_echo "$as_me:$LINENO: result: yes" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
# FIXME - insert some real tests, host_os isn't really good enough
@@ -12275,15 +11607,15 @@
if test -n "$STRIP" ; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
- { $as_echo "$as_me:$LINENO: result: yes" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
;;
*)
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
;;
esac
@@ -12300,55 +11632,194 @@
- # Report which library types will actually be built
- { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
- { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
-$as_echo "$can_build_shared" >&6; }
+ # Report which library types will actually be built
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+CC="$lt_save_CC"
+
+ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+ if ${ac_cv_prog_CXXCPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CXXCPP needs to be expanded
+ for CXXCPP in "$CXX -E" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer to if __STDC__ is defined, since
+ # exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include
+#else
+# include
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
- { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-$as_echo_n "checking whether to build shared libraries... " >&6; }
- test "$can_build_shared" = "no" && enable_shared=no
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
- # On AIX, shared libraries and static libraries use the same namespace, and
- # are all built from PIC.
- case $host_os in
- aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
- aix[4-9]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
- esac
- { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
-$as_echo "$enable_shared" >&6; }
+ done
+ ac_cv_prog_CXXCPP=$CXXCPP
- { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-$as_echo_n "checking whether to build static libraries... " >&6; }
- # Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
- { $as_echo "$as_me:$LINENO: result: $enable_static" >&5
-$as_echo "$enable_static" >&6; }
+fi
+ CXXCPP=$ac_cv_prog_CXXCPP
+else
+ ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer to if __STDC__ is defined, since
+ # exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include
+#else
+# include
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
fi
+
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-CC="$lt_save_CC"
-
+else
+ _lt_caught_CXX_error=yes
+fi
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
@@ -12375,6 +11846,8 @@
module_expsym_cmds_CXX=
link_all_deplibs_CXX=unknown
old_archive_cmds_CXX=$old_archive_cmds
+reload_flag_CXX=$reload_flag
+reload_cmds_CXX=$reload_cmds
no_undefined_flag_CXX=
whole_archive_flag_spec_CXX=
enable_shared_with_static_runtimes_CXX=no
@@ -12430,6 +11903,7 @@
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
lt_save_LD=$LD
lt_save_GCC=$GCC
GCC=$GXX
@@ -12447,6 +11921,7 @@
fi
test -z "${LDCXX+set}" || LD=$LDCXX
CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
compiler=$CC
compiler_CXX=$CC
for cc_temp in $compiler""; do
@@ -12457,7 +11932,7 @@
*) break;;
esac
done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
if test -n "$compiler"; then
@@ -12475,7 +11950,7 @@
# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
+if test "${with_gnu_ld+set}" = set; then :
withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
else
with_gnu_ld=no
@@ -12484,7 +11959,7 @@
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
case $host in
*-*-mingw*)
@@ -12514,13 +11989,13 @@
;;
esac
elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
- { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
$as_echo_n "checking for non-GNU ld... " >&6; }
fi
-if test "${lt_cv_path_LD+set}" = set; then
+if ${lt_cv_path_LD+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
@@ -12551,18 +12026,16 @@
LD="$lt_cv_path_LD"
if test -n "$LD"; then
- { $as_echo "$as_me:$LINENO: result: $LD" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
$as_echo "$LD" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
- { (exit 1); exit 1; }; }
-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
+if ${lt_cv_prog_gnu_ld+:} false; then :
$as_echo_n "(cached) " >&6
else
# I'd rather use --version here, but apparently some GNU lds only accept -v.
@@ -12575,7 +12048,7 @@
;;
esac
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
$as_echo "$lt_cv_prog_gnu_ld" >&6; }
with_gnu_ld=$lt_cv_prog_gnu_ld
@@ -12588,8 +12061,8 @@
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
if test "$with_gnu_ld" = yes; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
@@ -12621,7 +12094,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
GXX=no
@@ -12630,7 +12103,7 @@
fi
# PORTME: fill in a description of your system's C++ link characteristics
- { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
ld_shlibs_CXX=yes
case $host_os in
@@ -12731,11 +12204,13 @@
allow_undefined_flag_CXX='-berok'
# Determine the default libpath from the value encoded in an empty
# executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath__CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -12746,55 +12221,35 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
+if ac_fn_cxx_try_link "$LINENO"; then :
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
fi
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+ fi
fi
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ aix_libpath=$lt_cv_aix_libpath__CXX
+fi
hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
@@ -12803,11 +12258,13 @@
else
# Determine the default libpath from the value encoded in an
# empty executable.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath__CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -12818,59 +12275,44 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
+if ac_fn_cxx_try_link "$LINENO"; then :
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
fi
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath__CXX"; then
+ lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+ fi
fi
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+ aix_libpath=$lt_cv_aix_libpath__CXX
+fi
hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
no_undefined_flag_CXX=' ${wl}-bernotok'
allow_undefined_flag_CXX=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec_CXX='$convenience'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec_CXX='$convenience'
+ fi
archive_cmds_need_lc_CXX=yes
# This is similar to how AIX traditionally builds its shared
# libraries.
@@ -12900,28 +12342,75 @@
;;
cygwin* | mingw* | pw32* | cegcc*)
- # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec_CXX='-L$libdir'
- allow_undefined_flag_CXX=unsupported
- always_export_symbols_CXX=no
- enable_shared_with_static_runtimes_CXX=yes
-
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs_CXX=no
- fi
- ;;
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec_CXX=' '
+ allow_undefined_flag_CXX=unsupported
+ always_export_symbols_CXX=yes
+ file_list_spec_CXX='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
+ enable_shared_with_static_runtimes_CXX=yes
+ # Don't use ranlib
+ old_postinstall_cmds_CXX='chmod 644 $oldlib'
+ postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec_CXX='-L$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
+ allow_undefined_flag_CXX=unsupported
+ always_export_symbols_CXX=no
+ enable_shared_with_static_runtimes_CXX=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs_CXX=no
+ fi
+ ;;
+ esac
+ ;;
darwin* | rhapsody*)
@@ -12929,7 +12418,11 @@
hardcode_direct_CXX=no
hardcode_automatic_CXX=yes
hardcode_shlibpath_var_CXX=unsupported
- whole_archive_flag_spec_CXX=''
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ else
+ whole_archive_flag_spec_CXX=''
+ fi
link_all_deplibs_CXX=yes
allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
case $cc_basename in
@@ -12937,7 +12430,7 @@
*) _lt_dar_can_shared=$GCC ;;
esac
if test "$_lt_dar_can_shared" = "yes"; then
- output_verbose_link_cmd=echo
+ output_verbose_link_cmd=func_echo_all
archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -12990,6 +12483,11 @@
gnu*)
;;
+ haiku*)
+ archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ link_all_deplibs_CXX=yes
+ ;;
+
hpux9*)
hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
hardcode_libdir_separator_CXX=:
@@ -13014,11 +12512,11 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test "$GXX" = yes; then
- archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
@@ -13079,7 +12577,7 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test "$GXX" = yes; then
@@ -13089,10 +12587,10 @@
archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
@@ -13122,7 +12620,7 @@
case $cc_basename in
CC*)
# SGI C++
- archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
@@ -13133,9 +12631,9 @@
*)
if test "$GXX" = yes; then
if test "$with_gnu_ld" = no; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
fi
fi
link_all_deplibs_CXX=yes
@@ -13146,7 +12644,7 @@
inherit_rpath_CXX=yes
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -13164,7 +12662,7 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
@@ -13201,26 +12699,26 @@
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
- *pgCC\ [1-5]* | *pgcpp\ [1-5]*)
+ *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
prelink_cmds_CXX='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
old_archive_cmds_CXX='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
$RANLIB $oldlib'
archive_cmds_CXX='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
archive_expsym_cmds_CXX='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
;;
- *) # Version 6 will use weak symbols
+ *) # Version 6 and above use weak symbols
archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
;;
@@ -13228,7 +12726,7 @@
hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
- whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
;;
cxx*)
# Compaq C++
@@ -13247,9 +12745,9 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
;;
- xl*)
+ xl* | mpixl* | bgxl*)
# IBM XL 8.0 on PPC, with GNU ld
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
@@ -13269,13 +12767,13 @@
archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
hardcode_libdir_flag_spec_CXX='-R$libdir'
- whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
compiler_needs_object_CXX=yes
# Not sure whether something based on
# $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
# would be better.
- output_verbose_link_cmd='echo'
+ output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
@@ -13344,7 +12842,7 @@
export_dynamic_flag_spec_CXX='${wl}-E'
whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
fi
- output_verbose_link_cmd=echo
+ output_verbose_link_cmd=func_echo_all
else
ld_shlibs_CXX=no
fi
@@ -13379,15 +12877,15 @@
case $host in
osf3*)
allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
;;
*)
allow_undefined_flag_CXX=' -expect_unresolved \*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
$RM $lib.exp'
hardcode_libdir_flag_spec_CXX='-rpath $libdir'
;;
@@ -13403,17 +12901,17 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
case $host in
osf3*)
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
;;
*)
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
;;
esac
@@ -13423,7 +12921,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
# FIXME: insert proper C++ library support
@@ -13459,7 +12957,7 @@
solaris*)
case $cc_basename in
- CC*)
+ CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
archive_cmds_need_lc_CXX=yes
no_undefined_flag_CXX=' -zdefs'
@@ -13480,7 +12978,7 @@
esac
link_all_deplibs_CXX=yes
- output_verbose_link_cmd='echo'
+ output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
@@ -13500,14 +12998,14 @@
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
- archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
# g++ 2.7 appears to require `-G' NOT `-shared' on this
# platform.
@@ -13518,7 +13016,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
fi
hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
@@ -13572,6 +13070,10 @@
CC*)
archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
+ '"$old_archive_cmds_CXX"
+ reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
+ '"$reload_cmds_CXX"
;;
*)
archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
@@ -13605,7 +13107,7 @@
;;
esac
- { $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
$as_echo "$ld_shlibs_CXX" >&6; }
test "$ld_shlibs_CXX" = no && can_build_shared=no
@@ -13633,11 +13135,18 @@
};
_LT_EOF
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+esac
+
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
@@ -13646,7 +13155,7 @@
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
- case $p in
+ case ${prev}${p} in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
@@ -13655,13 +13164,22 @@
test $p = "-R"; then
prev=$p
continue
- else
- prev=
fi
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
+ case ${prev} in
+ -L | -R)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
@@ -13681,8 +13199,10 @@
postdeps_CXX="${postdeps_CXX} ${prev}${p}"
fi
fi
+ prev=
;;
+ *.lto.$objext) ;; # Ignore GCC LTO objects
*.$objext)
# This assumes that the test object file only shows up
# once in the compiler output.
@@ -13718,6 +13238,7 @@
fi
$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
# PORTME: override above test on systems where it is broken
case $host_os in
@@ -13753,7 +13274,7 @@
solaris*)
case $cc_basename in
- CC*)
+ CC* | sunCC*)
# The more standards-conforming stlport4 library is
# incompatible with the Cstd library. Avoid specifying
# it if it's in CXXFLAGS. Ignore libCrun as
@@ -13818,8 +13339,6 @@
lt_prog_compiler_pic_CXX=
lt_prog_compiler_static_CXX=
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
# C++ specific cases for pic, static, wl, etc.
if test "$GXX" = yes; then
@@ -13869,6 +13388,11 @@
# DJGPP does not support shared libraries at all
lt_prog_compiler_pic_CXX=
;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static_CXX=
+ ;;
interix[3-9]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
@@ -13918,6 +13442,11 @@
;;
esac
;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+ ;;
dgux*)
case $cc_basename in
ec++*)
@@ -13974,7 +13503,7 @@
;;
esac
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
case $cc_basename in
KCC*)
# KAI C++ Compiler
@@ -14007,8 +13536,8 @@
lt_prog_compiler_pic_CXX=
lt_prog_compiler_static_CXX='-non_shared'
;;
- xlc* | xlC*)
- # IBM XL 8.0 on PPC
+ xlc* | xlC* | bgxl[cC]* | mpixl[cC]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_pic_CXX='-qpic'
lt_prog_compiler_static_CXX='-qstaticlink'
@@ -14070,7 +13599,7 @@
;;
solaris*)
case $cc_basename in
- CC*)
+ CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
lt_prog_compiler_pic_CXX='-KPIC'
lt_prog_compiler_static_CXX='-Bstatic'
@@ -14135,18 +13664,25 @@
lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
;;
esac
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
-
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; }
+lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX
#
# Check to make sure the PIC flag actually works.
#
if test -n "$lt_prog_compiler_pic_CXX"; then
- { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then
+if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_pic_works_CXX=no
@@ -14162,15 +13698,15 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14165: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:14169: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_pic_works_CXX=yes
@@ -14179,7 +13715,7 @@
$RM conftest*
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
@@ -14196,13 +13732,15 @@
+
+
#
# Check to make sure the static flag actually works.
#
wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then
+if ${lt_cv_prog_compiler_static_works_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_static_works_CXX=no
@@ -14215,7 +13753,7 @@
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_static_works_CXX=yes
@@ -14228,7 +13766,7 @@
LDFLAGS="$save_LDFLAGS"
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
@@ -14240,9 +13778,9 @@
- { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_c_o_CXX=no
@@ -14261,16 +13799,16 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14264: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:14268: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o_CXX=yes
@@ -14287,14 +13825,14 @@
$RM conftest*
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
- { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_c_o_CXX=no
@@ -14313,16 +13851,16 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14316: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:14320: \$? = $ac_status" >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
lt_cv_prog_compiler_c_o_CXX=yes
@@ -14339,7 +13877,7 @@
$RM conftest*
fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
@@ -14348,7 +13886,7 @@
hard_links="nottested"
if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
$as_echo_n "checking if we can lock with hard links... " >&6; }
hard_links=yes
$RM conftest*
@@ -14356,10 +13894,10 @@
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
$as_echo "$hard_links" >&6; }
if test "$hard_links" = no; then
- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
need_locks=warn
fi
@@ -14369,33 +13907,41 @@
- { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
case $host_os in
aix[4-9]*)
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global defined
+ # symbols, whereas GNU nm marks them as "W".
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
export_symbols_cmds_CXX="$ltdll_cmds"
- ;;
+ ;;
cygwin* | mingw* | cegcc*)
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
+ case $cc_basename in
+ cl*) ;;
+ *)
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+ ;;
+ esac
+ ;;
*)
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
+ ;;
esac
- exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
$as_echo "$ld_shlibs_CXX" >&6; }
test "$ld_shlibs_CXX" = no && can_build_shared=no
@@ -14423,46 +13969,52 @@
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
- $RM conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl_CXX
- pic_flag=$lt_prog_compiler_pic_CXX
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
- allow_undefined_flag_CXX=
- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl_CXX
+ pic_flag=$lt_prog_compiler_pic_CXX
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+ allow_undefined_flag_CXX=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
(eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
- then
- archive_cmds_need_lc_CXX=no
- else
- archive_cmds_need_lc_CXX=yes
- fi
- allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $RM conftest*
- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-$as_echo "$archive_cmds_need_lc_CXX" >&6; }
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc_CXX=no
+ else
+ lt_cv_archive_cmds_need_lc_CXX=yes
+ fi
+ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; }
+ archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX
;;
esac
fi
@@ -14532,7 +14084,7 @@
- { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
$as_echo_n "checking dynamic linker characteristics... " >&6; }
library_names_spec=
@@ -14619,7 +14171,7 @@
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
@@ -14650,8 +14202,9 @@
need_version=no
need_lib_prefix=no
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
@@ -14672,36 +14225,82 @@
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
;;
esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
;;
*)
+ # Assume MSVC wrapper
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
;;
esac
- dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
@@ -14787,6 +14386,19 @@
hardcode_into_libs=yes
;;
+haiku*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
@@ -14829,8 +14441,10 @@
soname_spec='${libname}${release}${shared_ext}$major'
;;
esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
;;
interix[3-9]*)
@@ -14888,7 +14502,7 @@
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -14897,16 +14511,17 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
+
# Some binutils ld are patched to set DT_RUNPATH
- save_LDFLAGS=$LDFLAGS
- save_libdir=$libdir
- eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
- LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -14917,43 +14532,19 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then
- shlibpath_overrides_runpath=yes
+if ac_fn_cxx_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
fi
-
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
fi
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS=$save_LDFLAGS
- libdir=$save_libdir
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
@@ -14965,8 +14556,9 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -15166,7 +14758,7 @@
dynamic_linker=no
;;
esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
$as_echo "$dynamic_linker" >&6; }
test "$dynamic_linker" = no && can_build_shared=no
@@ -15217,7 +14809,9 @@
- { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
hardcode_action_CXX=
if test -n "$hardcode_libdir_flag_spec_CXX" ||
@@ -15242,7 +14836,7 @@
# directories.
hardcode_action_CXX=unsupported
fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
$as_echo "$hardcode_action_CXX" >&6; }
if test "$hardcode_action_CXX" = relink ||
@@ -15264,6 +14858,7 @@
fi # test -n "$compiler"
CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
LDCXX=$LD
LD=$lt_save_LD
GCC=$lt_save_GCC
@@ -15315,7 +14910,7 @@
# Check whether --with-sdl-prefix was given.
-if test "${with_sdl_prefix+set}" = set; then
+if test "${with_sdl_prefix+set}" = set; then :
withval=$with_sdl_prefix; sdl_prefix="$withval"
else
sdl_prefix=""
@@ -15323,14 +14918,14 @@
# Check whether --with-sdl-exec-prefix was given.
-if test "${with_sdl_exec_prefix+set}" = set; then
+if test "${with_sdl_exec_prefix+set}" = set; then :
withval=$with_sdl_exec_prefix; sdl_exec_prefix="$withval"
else
sdl_exec_prefix=""
fi
# Check whether --enable-sdltest was given.
-if test "${enable_sdltest+set}" = set; then
+if test "${enable_sdltest+set}" = set; then :
enableval=$enable_sdltest;
else
enable_sdltest=yes
@@ -15350,14 +14945,15 @@
fi
fi
+ as_save_PATH="$PATH"
if test "x$prefix" != xNONE; then
PATH="$prefix/bin:$prefix/usr/bin:$PATH"
fi
# Extract the first word of "sdl-config", so it can be a program name with args.
set dummy sdl-config; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_SDL_CONFIG+set}" = set; then
+if ${ac_cv_path_SDL_CONFIG+:} false; then :
$as_echo_n "(cached) " >&6
else
case $SDL_CONFIG in
@@ -15370,14 +14966,14 @@
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_path_SDL_CONFIG="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
test -z "$ac_cv_path_SDL_CONFIG" && ac_cv_path_SDL_CONFIG="no"
@@ -15386,16 +14982,17 @@
fi
SDL_CONFIG=$ac_cv_path_SDL_CONFIG
if test -n "$SDL_CONFIG"; then
- { $as_echo "$as_me:$LINENO: result: $SDL_CONFIG" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SDL_CONFIG" >&5
$as_echo "$SDL_CONFIG" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
+ PATH="$as_save_PATH"
min_sdl_version=1.2.4
- { $as_echo "$as_me:$LINENO: checking for SDL - version >= $min_sdl_version" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SDL - version >= $min_sdl_version" >&5
$as_echo_n "checking for SDL - version >= $min_sdl_version... " >&6; }
no_sdl=""
if test "$SDL_CONFIG" = "no" ; then
@@ -15418,14 +15015,10 @@
CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
LIBS="$LIBS $SDL_LIBS"
rm -f conf.sdltest
- if test "$cross_compiling" = yes; then
+ if test "$cross_compiling" = yes; then :
echo $ac_n "cross compiling; assumed OK... $ac_c"
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
@@ -15486,53 +15079,26 @@
_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_run "$LINENO"; then :
-( exit $ac_status )
-no_sdl=yes
+else
+ no_sdl=yes
fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
fi
-
CFLAGS="$ac_save_CFLAGS"
CXXFLAGS="$ac_save_CXXFLAGS"
LIBS="$ac_save_LIBS"
fi
fi
if test "x$no_sdl" = x ; then
- { $as_echo "$as_me:$LINENO: result: yes" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
:
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
if test "$SDL_CONFIG" = "no" ; then
echo "*** The sdl-config script installed by SDL could not be found"
@@ -15547,11 +15113,7 @@
CFLAGS="$CFLAGS $SDL_CFLAGS"
CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
LIBS="$LIBS $SDL_LIBS"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
@@ -15570,27 +15132,7 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
+if ac_fn_c_try_link "$LINENO"; then :
echo "*** The test program compiled, but did not run. This usually means"
echo "*** that the run-time linker is not finding SDL or finding the wrong"
echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
@@ -15601,18 +15143,13 @@
echo "*** If you have an old version installed, it is best to remove it, although"
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** The test program failed to compile or link. See the file config.log for the"
echo "*** exact error that occured. This usually means SDL was incorrectly installed"
echo "*** or that you have moved SDL since it was installed. In the latter case, you"
echo "*** may want to edit the sdl-config script: $SDL_CONFIG"
fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
CFLAGS="$ac_save_CFLAGS"
CXXFLAGS="$ac_save_CXXFLAGS"
LIBS="$ac_save_LIBS"
@@ -15635,14 +15172,12 @@
# AM_PATH_SDL does not stop if SDL is not found; therefore:
if test "_$SDL_LIBS" = _; then
- { { $as_echo "$as_me:$LINENO: error: SDL not found" >&5
-$as_echo "$as_me: error: SDL not found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "SDL not found" "$LINENO" 5
fi
# We also need the SDL_image and SDL_mixer libraries:
- { $as_echo "$as_me:$LINENO: checking for SDL_image library (>= 1.2.0)" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SDL_image library (>= 1.2.0)" >&5
$as_echo_n "checking for SDL_image library (>= 1.2.0)... " >&6; }
old_CFLAGS="$CFLAGS"
@@ -15653,11 +15188,7 @@
LIBS="$SDL_LIBS -lSDL_image"
# echo "{Using CFLAGS='$CFLAGS' LDFLAGS='$LDFLAGS' LIBS='$LIBS'}"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
@@ -15678,47 +15209,19 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
+if ac_fn_c_try_link "$LINENO"; then :
- { $as_echo "$as_me:$LINENO: result: found" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: found" >&5
$as_echo "found" >&6; }
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- { { $as_echo "$as_me:$LINENO: error: could not link with SDL_image.
-You can get it at http://www.libsdl.org/projects/SDL_image/" >&5
-$as_echo "$as_me: error: could not link with SDL_image.
-You can get it at http://www.libsdl.org/projects/SDL_image/" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "could not link with SDL_image.
+You can get it at http://www.libsdl.org/projects/SDL_image/" "$LINENO" 5
fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
CFLAGS="$old_CFLAGS"
unset old_CFLAGS
@@ -15729,7 +15232,7 @@
- { $as_echo "$as_me:$LINENO: checking for SDL_mixer" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SDL_mixer" >&5
$as_echo_n "checking for SDL_mixer... " >&6; }
ac_ext=c
@@ -15745,11 +15248,7 @@
# Darwin seems to require main(int, char *[]) instead of main():
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include
@@ -15772,54 +15271,23 @@
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
+if ac_fn_c_try_link "$LINENO"; then :
- { $as_echo "$as_me:$LINENO: result: found" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: found" >&5
$as_echo "found" >&6; }
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- { { $as_echo "$as_me:$LINENO: error: SDL_mixer not found
+ as_fn_error $? "SDL_mixer not found
SDL_mixer 1.2.4 or later is needed.
See http://www.libsdl.org/projects/SDL_mixer/
- " >&5
-$as_echo "$as_me: error: SDL_mixer not found
-
- SDL_mixer 1.2.4 or later is needed.
- See http://www.libsdl.org/projects/SDL_mixer/
- " >&2;}
- { (exit 1); exit 1; }; }
+ " "$LINENO" 5
fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
CFLAGS="$old_CFLAGS"
LIBS="$old_LIBS"
ac_ext=c
@@ -15845,7 +15313,7 @@
-ac_config_files="$ac_config_files Makefile flatzebra-0.1.spec flatzebra-0.1.pc src/Makefile src/flatzebra/Makefile"
+ac_config_files="$ac_config_files Makefile flatzebra.spec flatzebra-0.1.pc src/Makefile src/flatzebra/Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
@@ -15874,13 +15342,13 @@
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) $as_unset $ac_var ;;
+ *) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
@@ -15888,8 +15356,8 @@
(set) 2>&1 |
case $as_nl`(ac_space=' '; set) 2>&1` in #(
*${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
@@ -15911,12 +15379,23 @@
:end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
- test "x$cache_file" != "x/dev/null" &&
- { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
$as_echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
else
- { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
@@ -15966,14 +15445,15 @@
ac_libobjs=
ac_ltlibobjs=
+U=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
# 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
# will be set to the directory where LIBOBJS objects are built.
- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
@@ -15989,41 +15469,26 @@
fi
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
-: ${CONFIG_STATUS=./config.status}
+: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
@@ -16033,17 +15498,18 @@
debug=false
ac_cs_recheck=false
ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
@@ -16051,23 +15517,15 @@
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
esac
-
fi
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
as_nl='
'
export as_nl
@@ -16075,7 +15533,13 @@
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
@@ -16086,7 +15550,7 @@
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
- case $arg in
+ case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
@@ -16109,13 +15573,6 @@
}
fi
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
@@ -16125,15 +15582,16 @@
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
+as_myself=
+case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
IFS=$as_save_IFS
;;
@@ -16145,12 +15603,16 @@
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
+ exit 1
fi
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
@@ -16162,7 +15624,89 @@
LANGUAGE=C
export LANGUAGE
-# Required to use basename.
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
@@ -16176,8 +15720,12 @@
as_basename=false
fi
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
-# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
@@ -16197,106 +15745,103 @@
}
s/.*/./; q'`
-# CDPATH.
-$as_unset CDPATH
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
+case `echo -n x` in #(((((
-n*)
- case `echo 'x\c'` in
+ case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
else
- as_expr=false
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
+} # as_fn_mkdir_p
if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
+ as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
@@ -16315,10 +15860,10 @@
if test -d "$1"; then
test -d "$1/.";
else
- case $1 in
+ case $1 in #(
-*)set "./$1";;
esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
???[sx]*):;;*)false;;esac;fi
'\'' sh
'
@@ -16333,13 +15878,19 @@
exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-# Save the log message, to keep $[0] and so on meaningful, and to
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by $as_me, which was
-generated by GNU Autoconf 2.63. Invocation command line was
+generated by GNU Autoconf 2.68. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -16367,13 +15918,15 @@
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
-Usage: $0 [OPTION]... [FILE]...
+Usage: $0 [OPTION]... [TAG]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
-q, --quiet, --silent
do not print progress messages
-d, --debug don't remove temporary files
@@ -16387,16 +15940,17 @@
Configuration commands:
$config_commands
-Report bugs to ."
+Report bugs to the package provider."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
config.status
-configured by $0, generated by GNU Autoconf 2.63,
- with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.68,
+ with options \\"\$ac_cs_config\\"
-Copyright (C) 2008 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
@@ -16414,11 +15968,16 @@
while test $# != 0
do
case $1 in
- --*=*)
+ --*=?*)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
*)
ac_option=$1
ac_optarg=$2
@@ -16432,14 +15991,17 @@
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
$as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
esac
- CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
--he | --h | --help | --hel | -h )
$as_echo "$ac_cs_usage"; exit ;;
@@ -16448,11 +16010,10 @@
ac_cs_silent=: ;;
# This is an error.
- -*) { $as_echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
- *) ac_config_targets="$ac_config_targets $1"
+ *) as_fn_append ac_config_targets " $1"
ac_need_defaults=false ;;
esac
@@ -16503,184 +16064,208 @@
sed_quote_subst='$sed_quote_subst'
double_quote_subst='$double_quote_subst'
delay_variable_subst='$delay_variable_subst'
-enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
-macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
-macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
-pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
-enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
-host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
-host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
-host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
-build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
-build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
-build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
-SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
-Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
-GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
-EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
-FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
-LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
-NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
-LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
-max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
-ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
-exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
-lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
-lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
-lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
-reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
-reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
-deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
-file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
-AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
-AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
-RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
-old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
-CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
-GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
-SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
-ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
-MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
-need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
-DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
-NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
-LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
-libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
-shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
-export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
-allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
-inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
-link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
-fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
-always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
-export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
-variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
-need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
-version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
-runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
-libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
-soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
-old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
-striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_lib_search_dirs='`$ECHO "X$compiler_lib_search_dirs" | $Xsed -e "$delay_single_quote_subst"`'
-predep_objects='`$ECHO "X$predep_objects" | $Xsed -e "$delay_single_quote_subst"`'
-postdep_objects='`$ECHO "X$postdep_objects" | $Xsed -e "$delay_single_quote_subst"`'
-predeps='`$ECHO "X$predeps" | $Xsed -e "$delay_single_quote_subst"`'
-postdeps='`$ECHO "X$postdeps" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_lib_search_path='`$ECHO "X$compiler_lib_search_path" | $Xsed -e "$delay_single_quote_subst"`'
-LD_CXX='`$ECHO "X$LD_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_cmds_CXX='`$ECHO "X$old_archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_CXX='`$ECHO "X$compiler_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-GCC_CXX='`$ECHO "X$GCC_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "X$lt_prog_compiler_no_builtin_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_wl_CXX='`$ECHO "X$lt_prog_compiler_wl_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_pic_CXX='`$ECHO "X$lt_prog_compiler_pic_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_static_CXX='`$ECHO "X$lt_prog_compiler_static_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o_CXX='`$ECHO "X$lt_cv_prog_compiler_c_o_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds_need_lc_CXX='`$ECHO "X$archive_cmds_need_lc_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes_CXX='`$ECHO "X$enable_shared_with_static_runtimes_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-export_dynamic_flag_spec_CXX='`$ECHO "X$export_dynamic_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-whole_archive_flag_spec_CXX='`$ECHO "X$whole_archive_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_needs_object_CXX='`$ECHO "X$compiler_needs_object_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_new_cmds_CXX='`$ECHO "X$old_archive_from_new_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds_CXX='`$ECHO "X$old_archive_from_expsyms_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds_CXX='`$ECHO "X$archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-archive_expsym_cmds_CXX='`$ECHO "X$archive_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-module_cmds_CXX='`$ECHO "X$module_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-module_expsym_cmds_CXX='`$ECHO "X$module_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-with_gnu_ld_CXX='`$ECHO "X$with_gnu_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-allow_undefined_flag_CXX='`$ECHO "X$allow_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-no_undefined_flag_CXX='`$ECHO "X$no_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_CXX='`$ECHO "X$hardcode_libdir_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_ld_CXX='`$ECHO "X$hardcode_libdir_flag_spec_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_separator_CXX='`$ECHO "X$hardcode_libdir_separator_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct_CXX='`$ECHO "X$hardcode_direct_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct_absolute_CXX='`$ECHO "X$hardcode_direct_absolute_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_minus_L_CXX='`$ECHO "X$hardcode_minus_L_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_shlibpath_var_CXX='`$ECHO "X$hardcode_shlibpath_var_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_automatic_CXX='`$ECHO "X$hardcode_automatic_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-inherit_rpath_CXX='`$ECHO "X$inherit_rpath_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-link_all_deplibs_CXX='`$ECHO "X$link_all_deplibs_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-fix_srcfile_path_CXX='`$ECHO "X$fix_srcfile_path_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-always_export_symbols_CXX='`$ECHO "X$always_export_symbols_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-export_symbols_cmds_CXX='`$ECHO "X$export_symbols_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-exclude_expsyms_CXX='`$ECHO "X$exclude_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-include_expsyms_CXX='`$ECHO "X$include_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-prelink_cmds_CXX='`$ECHO "X$prelink_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-file_list_spec_CXX='`$ECHO "X$file_list_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_action_CXX='`$ECHO "X$hardcode_action_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_lib_search_dirs_CXX='`$ECHO "X$compiler_lib_search_dirs_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-predep_objects_CXX='`$ECHO "X$predep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-postdep_objects_CXX='`$ECHO "X$postdep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-predeps_CXX='`$ECHO "X$predeps_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-postdeps_CXX='`$ECHO "X$postdeps_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_lib_search_path_CXX='`$ECHO "X$compiler_lib_search_path_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`'
+predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`'
+postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`'
+reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`'
+reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld_CXX='`$ECHO "$hardcode_libdir_flag_spec_ld_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`'
LTCC='$LTCC'
LTCFLAGS='$LTCFLAGS'
compiler='$compiler_DEFAULT'
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
# Quote evaled strings.
-for var in SED \
+for var in SHELL \
+ECHO \
+SED \
GREP \
EGREP \
FGREP \
@@ -16693,8 +16278,13 @@
OBJDUMP \
deplibs_check_method \
file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
AR \
AR_FLAGS \
+archiver_list_spec \
STRIP \
RANLIB \
CC \
@@ -16704,14 +16294,14 @@
lt_cv_sys_global_symbol_to_cdecl \
lt_cv_sys_global_symbol_to_c_name_address \
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-SHELL \
-ECHO \
+nm_file_list_spec \
lt_prog_compiler_no_builtin_flag \
-lt_prog_compiler_wl \
lt_prog_compiler_pic \
+lt_prog_compiler_wl \
lt_prog_compiler_static \
lt_cv_prog_compiler_c_o \
need_locks \
+MANIFEST_TOOL \
DSYMUTIL \
NMEDIT \
LIPO \
@@ -16727,7 +16317,6 @@
hardcode_libdir_flag_spec \
hardcode_libdir_flag_spec_ld \
hardcode_libdir_separator \
-fix_srcfile_path \
exclude_expsyms \
include_expsyms \
file_list_spec \
@@ -16735,6 +16324,7 @@
libname_spec \
library_names_spec \
soname_spec \
+install_override_mode \
finish_eval \
old_striplib \
striplib \
@@ -16745,10 +16335,11 @@
postdeps \
compiler_lib_search_path \
LD_CXX \
+reload_flag_CXX \
compiler_CXX \
lt_prog_compiler_no_builtin_flag_CXX \
-lt_prog_compiler_wl_CXX \
lt_prog_compiler_pic_CXX \
+lt_prog_compiler_wl_CXX \
lt_prog_compiler_static_CXX \
lt_cv_prog_compiler_c_o_CXX \
export_dynamic_flag_spec_CXX \
@@ -16760,7 +16351,6 @@
hardcode_libdir_flag_spec_CXX \
hardcode_libdir_flag_spec_ld_CXX \
hardcode_libdir_separator_CXX \
-fix_srcfile_path_CXX \
exclude_expsyms_CXX \
include_expsyms_CXX \
file_list_spec_CXX \
@@ -16770,9 +16360,9 @@
predeps_CXX \
postdeps_CXX \
compiler_lib_search_path_CXX; do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -16794,11 +16384,13 @@
module_expsym_cmds \
export_symbols_cmds \
prelink_cmds \
+postlink_cmds \
postinstall_cmds \
postuninstall_cmds \
finish_cmds \
sys_lib_search_path_spec \
sys_lib_dlsearch_path_spec \
+reload_cmds_CXX \
old_archive_cmds_CXX \
old_archive_from_new_cmds_CXX \
old_archive_from_expsyms_cmds_CXX \
@@ -16807,10 +16399,11 @@
module_cmds_CXX \
module_expsym_cmds_CXX \
export_symbols_cmds_CXX \
-prelink_cmds_CXX; do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+prelink_cmds_CXX \
+postlink_cmds_CXX; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -16818,12 +16411,6 @@
esac
done
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
- ;;
-esac
-
ac_aux_dir='$ac_aux_dir'
xsi_shell='$xsi_shell'
lt_shell_append='$lt_shell_append'
@@ -16857,14 +16444,12 @@
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
"libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "flatzebra-0.1.spec") CONFIG_FILES="$CONFIG_FILES flatzebra-0.1.spec" ;;
+ "flatzebra.spec") CONFIG_FILES="$CONFIG_FILES flatzebra.spec" ;;
"flatzebra-0.1.pc") CONFIG_FILES="$CONFIG_FILES flatzebra-0.1.pc" ;;
"src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
"src/flatzebra/Makefile") CONFIG_FILES="$CONFIG_FILES src/flatzebra/Makefile" ;;
- *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
@@ -16886,26 +16471,24 @@
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
- tmp=
+ tmp= ac_tmp=
trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
+ trap 'as_fn_exit 1' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
{
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
+ test -d "$tmp"
} ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
-} ||
-{
- $as_echo "$as_me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
@@ -16913,7 +16496,13 @@
if test -n "$CONFIG_FILES"; then
-ac_cr='
'
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
ac_cs_awk_cr='\\r'
@@ -16921,7 +16510,7 @@
ac_cs_awk_cr=$ac_cr
fi
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
_ACEOF
@@ -16930,24 +16519,18 @@
echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
echo "_ACEOF"
} >conf$$subs.sh ||
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
. ./conf$$subs.sh ||
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
@@ -16955,7 +16538,7 @@
rm -f conf$$subs.sh
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
_ACEOF
sed -n '
h
@@ -16969,7 +16552,7 @@
t delim
:nl
h
-s/\(.\{148\}\).*/\1/
+s/\(.\{148\}\)..*/\1/
t more1
s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
p
@@ -16983,7 +16566,7 @@
t nl
:delim
h
-s/\(.\{148\}\).*/\1/
+s/\(.\{148\}\)..*/\1/
t more2
s/["\\]/\\&/g; s/^/"/; s/$/"/
p
@@ -17003,7 +16586,7 @@
rm -f conf$$subs.awk
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
_ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
for (key in S) S_is_set[key] = 1
FS = ""
@@ -17035,23 +16618,29 @@
sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
else
cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
- || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
-$as_echo "$as_me: error: could not setup config files machinery" >&2;}
- { (exit 1); exit 1; }; }
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
_ACEOF
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
s/^[^=]*=[ ]*$//
}'
fi
@@ -17069,9 +16658,7 @@
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
- :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
-$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
- { (exit 1); exit 1; }; };;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
@@ -17090,7 +16677,7 @@
for ac_f
do
case $ac_f in
- -) ac_f="$tmp/stdin";;
+ -) ac_f="$ac_tmp/stdin";;
*) # Look for the file first in the build tree, then in the source tree
# (if the path is not absolute). The absolute path cannot be DOS-style,
# because $ac_f cannot contain `:'.
@@ -17099,12 +16686,10 @@
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
- { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
- { (exit 1); exit 1; }; };;
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
- ac_file_inputs="$ac_file_inputs '$ac_f'"
+ as_fn_append ac_file_inputs " '$ac_f'"
done
# Let's still pretend it is `configure' which instantiates (i.e., don't
@@ -17115,7 +16700,7 @@
`' by configure.'
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
$as_echo "$as_me: creating $ac_file" >&6;}
fi
# Neutralize special characters interpreted by sed in replacement strings.
@@ -17127,10 +16712,8 @@
esac
case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin" \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; } ;;
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
@@ -17158,47 +16741,7 @@
q
}
s/.*/./; q'`
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
+ as_dir="$ac_dir"; as_fn_mkdir_p
ac_builddir=.
case "$ac_dir" in
@@ -17255,7 +16798,6 @@
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
-
ac_sed_dataroot='
/datarootdir/ {
p
@@ -17265,12 +16807,11 @@
/@docdir@/p
/@infodir@/p
/@localedir@/p
-/@mandir@/p
-'
+/@mandir@/p'
case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
@@ -17280,7 +16821,7 @@
s&@infodir@&$infodir&g
s&@localedir@&$localedir&g
s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
+ s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF
@@ -17308,31 +16849,28 @@
s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
- { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
+which seems to be undefined. Please make sure it is defined" >&2;}
- rm -f "$tmp/stdin"
+ rm -f "$ac_tmp/stdin"
case $ac_file in
- -) cat "$tmp/out" && rm -f "$tmp/out";;
- *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
esac \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
;;
- :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
$as_echo "$as_me: executing $ac_file commands" >&6;}
;;
esac
@@ -17427,47 +16965,7 @@
q
}
s/.*/./; q'`
- { as_dir=$dirpart/$fdir
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
@@ -17495,7 +16993,8 @@
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
+# Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is part of GNU Libtool.
@@ -17543,6 +17042,12 @@
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
# The host system.
host_alias=$host_alias
host=$host
@@ -17592,9 +17097,11 @@
# turn newlines into spaces.
NL2SP=$lt_lt_NL2SP
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
# An object symbol dumper.
OBJDUMP=$lt_OBJDUMP
@@ -17602,13 +17109,30 @@
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method
-# Command to use when deplibs_check_method == "file_magic".
+# Command to use when deplibs_check_method = "file_magic".
file_magic_cmd=$lt_file_magic_cmd
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
# The archiver.
AR=$lt_AR
+
+# Flags to create an archive.
AR_FLAGS=$lt_AR_FLAGS
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
# A symbol stripping program.
STRIP=$lt_STRIP
@@ -17617,6 +17141,9 @@
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
# A C compiler.
LTCC=$lt_CC
@@ -17635,14 +17162,14 @@
# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
-# An echo program that does not interpret backslashes.
-ECHO=$lt_ECHO
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
# Used to examine libraries when file_magic_cmd begins with "file".
MAGIC_CMD=$MAGIC_CMD
@@ -17650,6 +17177,9 @@
# Must we lock files when doing compilation?
need_locks=$lt_need_locks
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
DSYMUTIL=$lt_DSYMUTIL
@@ -17706,6 +17236,9 @@
# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
# Command to use after installation of a shared archive.
postinstall_cmds=$lt_postinstall_cmds
@@ -17745,6 +17278,10 @@
# The linker used to build libraries.
LD=$lt_LD
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds
@@ -17757,12 +17294,12 @@
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static
@@ -17849,9 +17386,6 @@
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols
@@ -17867,6 +17401,9 @@
# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
# Specify filename containing input files.
file_list_spec=$lt_file_list_spec
@@ -17913,212 +17450,169 @@
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
-
- case $xsi_shell in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
-}
-
-# func_basename file
-func_basename ()
-{
- func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=${1%%=*}
- func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=$(( $* ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=${#1}
-}
-
-_LT_EOF
- ;;
- *) # Bourne compatible functions.
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-}
-
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
- esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[^=]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=`expr "$@"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
-esac
-
-case $lt_shell_append in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "$1+=\$2"
-}
-_LT_EOF
- ;;
- *)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "$1=\$$1\$2"
-}
-
-_LT_EOF
- ;;
- esac
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+ if test x"$xsi_shell" = xyes; then
+ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\ case ${1} in\
+\ */*) func_dirname_result="${1%/*}${2}" ;;\
+\ * ) func_dirname_result="${3}" ;;\
+\ esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\ func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\ case ${1} in\
+\ */*) func_dirname_result="${1%/*}${2}" ;;\
+\ * ) func_dirname_result="${3}" ;;\
+\ esac\
+\ func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\ # positional parameters, so assign one to ordinary parameter first.\
+\ func_stripname_result=${3}\
+\ func_stripname_result=${func_stripname_result#"${1}"}\
+\ func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\ func_split_long_opt_name=${1%%=*}\
+\ func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\ func_split_short_opt_arg=${1#??}\
+\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\ case ${1} in\
+\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\ *) func_lo2o_result=${1} ;;\
+\ esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+ func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+ func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+ func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+ sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+ eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\ func_quote_for_eval "${2}"\
+\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
- mv -f "$cfgfile" "$ofile" ||
+ mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
@@ -18130,6 +17624,10 @@
# The linker used to build libraries.
LD=$lt_LD_CXX
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_CXX
+reload_cmds=$lt_reload_cmds_CXX
+
# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds_CXX
@@ -18142,12 +17640,12 @@
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_CXX
-
# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_CXX
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_CXX
@@ -18234,9 +17732,6 @@
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_CXX
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path_CXX
-
# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols_CXX
@@ -18252,6 +17747,9 @@
# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds_CXX
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_CXX
+
# Specify filename containing input files.
file_list_spec=$lt_file_list_spec_CXX
@@ -18281,15 +17779,12 @@
done # for ac_tag
-{ (exit 0); exit 0; }
+as_fn_exit 0
_ACEOF
-chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
test $ac_write_fail = 0 ||
- { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
# configure is writing to config.log, and then calls config.status.
@@ -18310,10 +17805,10 @@
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
+ $ac_cs_success || as_fn_exit 1
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
- { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
fi
diff -Nru flatzebra-0.1.5/configure.ac flatzebra-0.1.6/configure.ac
--- flatzebra-0.1.5/configure.ac 2010-05-12 02:04:25.000000000 +0000
+++ flatzebra-0.1.6/configure.ac 2012-07-14 03:32:09.000000000 +0000
@@ -1,17 +1,17 @@
-# $Id: configure.ac,v 1.14 2010/05/12 02:04:25 sarrazip Exp $
+# $Id: configure.ac,v 1.19 2012/07/06 04:36:47 sarrazip Exp $
# configure.ac for the FlatZebra library
AC_PREREQ(2.54)
AC_INIT(src/flatzebra/GameEngine.h)
-AM_INIT_AUTOMAKE(flatzebra, 0.1.5)
+AM_INIT_AUTOMAKE(flatzebra, 0.1.6)
API=`echo $VERSION | cut -d . -f -2`; AC_SUBST(API)
RELEASE=`echo $VERSION | cut -d . -f 3`; AC_SUBST(RELEASE)
PACKAGE_FULL_NAME="FlatZebra"
-PACKAGE_SUMMARY_EN="Generic Game Engine library for 2D double-buffering animation"
-PACKAGE_SUMMARY_FR="Moteur générique de jeu vidéo 2D à double tampon"
+PACKAGE_SUMMARY_EN="Small Engine for 2D video games like BurgerSpace"
+PACKAGE_SUMMARY_FR="Petit moteur pour jeux vidéo 2D comme BurgerSpace"
AC_SUBST(PACKAGE_FULL_NAME)
AC_SUBST(PACKAGE_SUMMARY_EN)
AC_SUBST(PACKAGE_SUMMARY_FR)
@@ -72,7 +72,7 @@
AC_CONFIG_FILES([
Makefile
- flatzebra-0.1.spec
+ flatzebra.spec
flatzebra-0.1.pc
src/Makefile
src/flatzebra/Makefile
diff -Nru flatzebra-0.1.5/debian/changelog flatzebra-0.1.6/debian/changelog
--- flatzebra-0.1.5/debian/changelog 2012-02-29 07:30:27.000000000 +0000
+++ flatzebra-0.1.6/debian/changelog 2013-01-22 13:54:14.000000000 +0000
@@ -1,9 +1,31 @@
-flatzebra (0.1.5-4build1) precise; urgency=low
+flatzebra (0.1.6-2) unstable; urgency=low
- * No-change rebuild against current pkgbinarymangler to fix broken
- md5sums. (see LP #875466)
+ * Remove libflatzebra-0.1-2.symbols and go back to using shlibs instead.
- -- Martin Pitt Wed, 29 Feb 2012 08:30:27 +0100
+ -- Markus Koschany Tue, 22 Jan 2013 16:52:05 +0100
+
+flatzebra (0.1.6-1) unstable; urgency=low
+
+ * [bde9c69] Imported Upstream version 0.1.6.
+ * [e682fbb] Use dh to simplify debian/rules.
+ * [70066c4] Bump Standards-Version to 3.9.4.
+ * debian/control:
+ - Bump compat level to 9 and require debhelper >=9.
+ - Add myself to Uploaders.
+ - Replace build-dependency on autotools_dev with dh-autoreconf.
+ - Remove chrpath from build-depends. The library rpath works anyway.
+ - Change priority from extra to optional.
+ * debian/rules:
+ - Build with --parallel and autoreconf.
+ - Build with hardening=+all.
+ * [ffd0fee] Add libflatzebra .install files.
+ * [ce43b50] Add Multiarch support.
+ * [91e418e] Revise package description which was interchanged.
+ * [eff0ce6] Add Multi-Arch: same.
+ * [df7f75a] Remove *.dirs files, we don't need them.
+ * [5d7a532] Update debian/copyright to copyright format 1.0.
+
+ -- Markus Koschany Thu, 20 Dec 2012 20:14:25 +0100
flatzebra (0.1.5-4) unstable; urgency=low
diff -Nru flatzebra-0.1.5/debian/compat flatzebra-0.1.6/debian/compat
--- flatzebra-0.1.5/debian/compat 2011-05-23 21:45:25.000000000 +0000
+++ flatzebra-0.1.6/debian/compat 2012-12-28 21:50:39.000000000 +0000
@@ -1 +1 @@
-8
+9
diff -Nru flatzebra-0.1.5/debian/control flatzebra-0.1.6/debian/control
--- flatzebra-0.1.5/debian/control 2011-05-23 21:45:25.000000000 +0000
+++ flatzebra-0.1.6/debian/control 2013-01-12 00:08:58.000000000 +0000
@@ -1,32 +1,42 @@
Source: flatzebra
-Priority: extra
+Priority: optional
Maintainer: Debian Games Team
-Build-Depends: debhelper (>= 8), autotools-dev, libsdl1.2-dev, libsdl-image1.2-dev, libsdl-mixer1.2-dev, chrpath, pkg-config
-Standards-Version: 3.9.1
+Uploaders: Markus Koschany
+Build-Depends:
+ debhelper (>= 9),
+ dh-autoreconf,
+ libsdl-image1.2-dev,
+ libsdl-mixer1.2-dev,
+ libsdl1.2-dev,
+ pkg-config
+Standards-Version: 3.9.4
Section: libs
Homepage: http://sarrazip.com/dev/burgerspace.html
-Vcs-git: git://git.debian.org/git/pkg-games/flatzebra.git
-Vcs-Browser: http://git.debian.org/?p=pkg-games/flatzebra.git
+Vcs-git: git://anonscm.debian.org/pkg-games/flatzebra.git
+Vcs-Browser: http://anonscm.debian.org/gitweb/?p=pkg-games/flatzebra.git;a=summary
-Package: libflatzebra-dev
-Section: libdevel
+Package: libflatzebra-0.1-2
+Pre-Depends: ${misc:Pre-Depends}
Architecture: any
-Depends: ${misc:Depends}, libflatzebra-0.1-2 (= ${binary:Version})
-Conflicts: libgengameng-dev
-Description: Generic Game Engine library development files
- flatzebra is a simple, generic C++ game engine library supporting 2D
+Multi-Arch: same
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Conflicts: libgengameng4c2a
+Replaces: libgengameng4c2a
+Description: Generic Game Engine library
+ flatzebra is a simple generic C++ game engine library supporting 2D
double-buffering.
.
You should install this package if you need to run packages which use
flatzebra.
-Package: libflatzebra-0.1-2
+Package: libflatzebra-dev
+Section: libdevel
Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Conflicts: libgengameng4c2a
-Replaces: libgengameng4c2a
-Description: Generic Game Engine library
- flatzebra is a simple generic C++ game engine library supporting 2D
+Multi-Arch: same
+Depends: libflatzebra-0.1-2 (= ${binary:Version}), ${misc:Depends}
+Conflicts: libgengameng-dev
+Description: Generic Game Engine library development files
+ flatzebra is a simple, generic C++ game engine library supporting 2D
double-buffering.
.
Install this package if you wish to compile programs which use
diff -Nru flatzebra-0.1.5/debian/copyright flatzebra-0.1.6/debian/copyright
--- flatzebra-0.1.5/debian/copyright 2011-05-23 21:45:25.000000000 +0000
+++ flatzebra-0.1.6/debian/copyright 2012-12-28 21:50:39.000000000 +0000
@@ -1,34 +1,32 @@
-This package was debianized by Francois Marier on
-Thu, 01 Nov 2007 17:54:31 +1300.
-
-It was downloaded from http://sarrazip.com/dev/burgerspace.html
-
-Upstream Author:
-
- Pierre Sarrazin
-
-Copyright:
-
- Copyright (C) 2001-2004 Pierre Sarrazin
-
-License:
-
- This package is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This package is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this package; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-
-On Debian systems, the complete text of the GNU General
-Public License can be found in `/usr/share/common-licenses/GPL-2'.
-
-The Debian packaging is copyright 2007, Francois Marier
-and is licensed under the GPL, see above.
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: FlatZebra
+Upstream-Contact: Pierre Sarrazin
+Source: http://sarrazip.com/dev/burgerspace.html
+
+Files: *
+Copyright: 2001-2012 Pierre Sarrazin
+License: GPL-2+
+
+Files: debian/*
+Copyright: 2007-2011 Francois Marier
+ 2011 Felix Geyer
+ 2012 Markus Koschany
+License: GPL-2+
+
+License: GPL-2+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+ .
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+ .
+ You should have received a copy of the GNU General Public License
+ along with this package; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ .
+ On Debian systems, the complete text of the GNU General
+ Public License version 2 can be found in `/usr/share/common-licenses/GPL-2'.
diff -Nru flatzebra-0.1.5/debian/libflatzebra-0.1-2.dirs flatzebra-0.1.6/debian/libflatzebra-0.1-2.dirs
--- flatzebra-0.1.5/debian/libflatzebra-0.1-2.dirs 2011-05-23 21:45:25.000000000 +0000
+++ flatzebra-0.1.6/debian/libflatzebra-0.1-2.dirs 1970-01-01 00:00:00.000000000 +0000
@@ -1 +0,0 @@
-usr/lib
diff -Nru flatzebra-0.1.5/debian/libflatzebra-0.1-2.install flatzebra-0.1.6/debian/libflatzebra-0.1-2.install
--- flatzebra-0.1.5/debian/libflatzebra-0.1-2.install 1970-01-01 00:00:00.000000000 +0000
+++ flatzebra-0.1.6/debian/libflatzebra-0.1-2.install 2012-12-28 21:50:39.000000000 +0000
@@ -0,0 +1 @@
+usr/lib/*/libflatzebra*.so.*
diff -Nru flatzebra-0.1.5/debian/libflatzebra-dev.dirs flatzebra-0.1.6/debian/libflatzebra-dev.dirs
--- flatzebra-0.1.5/debian/libflatzebra-dev.dirs 2011-05-23 21:45:25.000000000 +0000
+++ flatzebra-0.1.6/debian/libflatzebra-dev.dirs 1970-01-01 00:00:00.000000000 +0000
@@ -1,3 +0,0 @@
-usr/lib
-usr/lib/pkgconfig
-usr/include/flatzebra
diff -Nru flatzebra-0.1.5/debian/libflatzebra-dev.install flatzebra-0.1.6/debian/libflatzebra-dev.install
--- flatzebra-0.1.5/debian/libflatzebra-dev.install 1970-01-01 00:00:00.000000000 +0000
+++ flatzebra-0.1.6/debian/libflatzebra-dev.install 2012-12-28 21:50:39.000000000 +0000
@@ -0,0 +1,3 @@
+usr/include/flatzebra-*/flatzebra/*.h usr/include/flatzebra
+usr/lib/*/*.so
+usr/lib/*/pkgconfig/*
diff -Nru flatzebra-0.1.5/debian/rules flatzebra-0.1.6/debian/rules
--- flatzebra-0.1.5/debian/rules 2011-05-23 21:46:31.000000000 +0000
+++ flatzebra-0.1.6/debian/rules 2012-12-28 21:50:39.000000000 +0000
@@ -1,96 +1,10 @@
#!/usr/bin/make -f
-# -*- makefile -*-
-# Sample debian/rules that uses debhelper.
-# This file was originally written by Joey Hess and Craig Small.
-# As a special exception, when this file is copied by dh-make into a
-# dh-make output file, you may use that output file without restriction.
-# This special exception was added by Craig Small in version 0.37 of dh-make.
-
-# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
+export DH_OPTIONS
+export DEB_BUILD_MAINT_OPTIONS = hardening=+all
+%:
+ dh $@ --parallel --with autoreconf
-# These are used for cross-compiling and for saving the configure script
-# from having to guess our platform (since we know it already)
-DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-
-
-# option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so
-version=`ls src/.libs/lib*.so.* | \
-# awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'`
-major=`ls src/.libs/lib*.so.* | \
-# awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'`
-
-config.status: configure
- dh_testdir
- # Add here commands to configure the package.
-ifneq "$(wildcard /usr/share/misc/config.sub)" ""
- cp -f /usr/share/misc/config.sub config.sub
-endif
-ifneq "$(wildcard /usr/share/misc/config.guess)" ""
- cp -f /usr/share/misc/config.guess config.guess
-endif
- ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info CFLAGS="$(CFLAGS)"
-
-
-build: build-stamp
-build-stamp: config.status
- dh_testdir
-
- # Add here commands to compile the package.
- $(MAKE)
-
- touch $@
-
-clean:
- dh_testdir
- dh_testroot
- rm -f build-stamp
-
- # Add here commands to clean up after the build process.
- [ ! -f Makefile ] || $(MAKE) distclean
- rm -f config.sub config.guess
-
- dh_clean
-
-install: build
- dh_testdir
- dh_testroot
- dh_prep
- dh_installdirs
-
- # Add here commands to install the package into debian/tmp
- $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
-
- chrpath -d $(CURDIR)/debian/tmp/usr/lib/libflatzebra*so*
-
- mv $(CURDIR)/debian/tmp/usr/include/flatzebra-*/flatzebra/*.h $(CURDIR)/debian/libflatzebra-dev/usr/include/flatzebra/
- mv $(CURDIR)/debian/tmp/usr/lib/pkgconfig/* $(CURDIR)/debian/libflatzebra-dev/usr/lib/pkgconfig/
- mv $(CURDIR)/debian/tmp/usr/lib/*.so $(CURDIR)/debian/libflatzebra-dev/usr/lib/
- mv $(CURDIR)/debian/tmp/usr/lib/libflatzebra*so.* $(CURDIR)/debian/libflatzebra-0.1-2/usr/lib/
-
-
-# Build architecture-independent files here.
-binary-indep: build install
-# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: build install
- dh_testdir
- dh_testroot
+override_dh_installchangelogs:
dh_installchangelogs NEWS
- dh_installdocs
- dh_link
- dh_strip
- dh_compress
- dh_fixperms
- dh_makeshlibs
- dh_installdeb
- dh_shlibdeps
- dh_gencontrol
- dh_md5sums
- dh_builddeb
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install
diff -Nru flatzebra-0.1.5/debian/watch flatzebra-0.1.6/debian/watch
--- flatzebra-0.1.5/debian/watch 2011-05-23 21:45:25.000000000 +0000
+++ flatzebra-0.1.6/debian/watch 2012-12-28 21:50:39.000000000 +0000
@@ -1,2 +1,2 @@
version=3
-http://sarrazip.com/dev/burgerspace.html flatzebra-(.*)\.tar\.gz
+http://sarrazip.com/dev/burgerspace.html flatzebra-(.*)\.tar\.gz debian uupdate
diff -Nru flatzebra-0.1.5/flatzebra-0.1.spec flatzebra-0.1.6/flatzebra-0.1.spec
--- flatzebra-0.1.5/flatzebra-0.1.spec 2010-05-13 03:20:46.000000000 +0000
+++ flatzebra-0.1.6/flatzebra-0.1.spec 1970-01-01 00:00:00.000000000 +0000
@@ -1,82 +0,0 @@
-# $Id: flatzebra-0.1.spec.in,v 1.3 2009/02/27 02:17:20 sarrazip Exp $
-# RPM specification file.
-
-# Release number can be specified with rpm --define 'rel SOMETHING' ...
-# If no such --define is used, the release number is 1.
-#
-# Source archive's extension can be specified with rpm --define 'srcext .foo'
-# where .foo is the source archive's actual extension.
-# To compile an RPM from a .bz2 source archive, give the command
-# rpmbuild -ta --define 'srcext .bz2' flatzebra-0.1.5.tar.bz2
-#
-%if %{?rel:0}%{!?rel:1}
-%define rel 1
-%endif
-%if %{?srcext:0}%{!?srcext:1}
-%define srcext .gz
-%endif
-
-Summary: A generic game engine for 2D double-buffering animation
-Name: flatzebra
-Version: 0.1.5
-Release: %{rel}
-License: GPL
-Group: Amusements/Games
-Source: %{name}-%{version}.tar%{srcext}
-URL: http://sarrazip.com/dev/burgerspace.html
-Prefix: /usr
-BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
-BuildRequires: SDL-devel >= 1.2.4
-BuildRequires: SDL_image-devel >= 1.2.2
-BuildRequires: SDL_mixer-devel >= 1.2.4
-Requires: SDL >= 1.2.4
-Requires: SDL_image >= 1.2.2
-Requires: SDL_mixer >= 1.2.4
-
-%description
-Generic Game Engine library used by BurgerSpace et al.
-
-%description -l fr
-Moteur de jeu générique utilisé par BurgerSpace et al.
-
-%package devel
-Summary: C++ header files for the flatzebra library
-Group: Development/Libraries
-Requires: flatzebra = 0.1.5
-
-%description devel
-C++ header files for the flatzebra library.
-
-%description -l fr devel
-En-têtes C++ pour la librairie flatzebra.
-
-
-%prep
-%setup -q
-
-%build
-%configure
-make %{?_smp_mflags}
-
-%install
-rm -fR "$RPM_BUILD_ROOT"
-make install DESTDIR="$RPM_BUILD_ROOT" INSTALL="%{__install} -p"
-
-%clean
-rm -fR $RPM_BUILD_ROOT
-
-%post -p /sbin/ldconfig
-
-%postun -p /sbin/ldconfig
-
-%files
-%defattr(-, root, root)
-%{_libdir}/lib*.so.*
-%doc %{_defaultdocdir}/*
-
-%files devel
-%defattr(-, root, root)
-%{_includedir}/*
-%{_libdir}/lib*.so
-%{_prefix}/lib/lib*.la
-%{_libdir}/pkgconfig/*
diff -Nru flatzebra-0.1.5/flatzebra-0.1.spec.in flatzebra-0.1.6/flatzebra-0.1.spec.in
--- flatzebra-0.1.5/flatzebra-0.1.spec.in 2009-02-27 02:17:20.000000000 +0000
+++ flatzebra-0.1.6/flatzebra-0.1.spec.in 1970-01-01 00:00:00.000000000 +0000
@@ -1,82 +0,0 @@
-# $Id: flatzebra-0.1.spec.in,v 1.3 2009/02/27 02:17:20 sarrazip Exp $
-# RPM specification file.
-
-# Release number can be specified with rpm --define 'rel SOMETHING' ...
-# If no such --define is used, the release number is 1.
-#
-# Source archive's extension can be specified with rpm --define 'srcext .foo'
-# where .foo is the source archive's actual extension.
-# To compile an RPM from a .bz2 source archive, give the command
-# rpmbuild -ta --define 'srcext .bz2' @PACKAGE@-@VERSION@.tar.bz2
-#
-%if %{?rel:0}%{!?rel:1}
-%define rel 1
-%endif
-%if %{?srcext:0}%{!?srcext:1}
-%define srcext .gz
-%endif
-
-Summary: A generic game engine for 2D double-buffering animation
-Name: @PACKAGE@
-Version: @VERSION@
-Release: %{rel}
-License: GPL
-Group: Amusements/Games
-Source: %{name}-%{version}.tar%{srcext}
-URL: http://sarrazip.com/dev/burgerspace.html
-Prefix: /usr
-BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
-BuildRequires: SDL-devel >= @MINVER_SDL@
-BuildRequires: SDL_image-devel >= @MINVER_SDL_IMAGE@
-BuildRequires: SDL_mixer-devel >= @MINVER_SDL_MIXER@
-Requires: SDL >= @MINVER_SDL@
-Requires: SDL_image >= @MINVER_SDL_IMAGE@
-Requires: SDL_mixer >= @MINVER_SDL_MIXER@
-
-%description
-Generic Game Engine library used by BurgerSpace et al.
-
-%description -l fr
-Moteur de jeu générique utilisé par BurgerSpace et al.
-
-%package devel
-Summary: C++ header files for the @PACKAGE@ library
-Group: Development/Libraries
-Requires: @PACKAGE@ = @VERSION@
-
-%description devel
-C++ header files for the @PACKAGE@ library.
-
-%description -l fr devel
-En-têtes C++ pour la librairie @PACKAGE@.
-
-
-%prep
-%setup -q
-
-%build
-%configure
-make %{?_smp_mflags}
-
-%install
-rm -fR "$RPM_BUILD_ROOT"
-make install DESTDIR="$RPM_BUILD_ROOT" INSTALL="%{__install} -p"
-
-%clean
-rm -fR $RPM_BUILD_ROOT
-
-%post -p /sbin/ldconfig
-
-%postun -p /sbin/ldconfig
-
-%files
-%defattr(-, root, root)
-%{_libdir}/lib*.so.*
-%doc %{_defaultdocdir}/*
-
-%files devel
-%defattr(-, root, root)
-%{_includedir}/*
-%{_libdir}/lib*.so
-%{_prefix}/lib/lib*.la
-%{_libdir}/pkgconfig/*
diff -Nru flatzebra-0.1.5/flatzebra.spec flatzebra-0.1.6/flatzebra.spec
--- flatzebra-0.1.5/flatzebra.spec 1970-01-01 00:00:00.000000000 +0000
+++ flatzebra-0.1.6/flatzebra.spec 2012-07-14 03:41:55.000000000 +0000
@@ -0,0 +1,74 @@
+Name: flatzebra
+Version: 0.1.6
+Release: 1%{?dist}
+Summary: Small Engine for 2D video games like BurgerSpace
+Summary(fr): Petit moteur pour jeux vidéo 2D comme BurgerSpace
+
+Group: Development/Libraries
+License: GPLv2+
+URL: http://sarrazip.com/dev/burgerspace.html
+Source0: http://sarrazip.com/dev/%{name}-%{version}.tar.gz
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+
+BuildRequires: SDL-devel >= 1.2.4
+BuildRequires: SDL_image-devel >= 1.2.2
+BuildRequires: SDL_mixer-devel >= 1.2.4
+
+%description
+Small game engine library required by BurgerSpace and other games.
+
+%description -l fr
+Petit moteur de jeu requis par BurgerSpace et autres jeux.
+
+
+%package devel
+Summary: C++ header files for the flatzebra library
+Summary(fr): En-têtes C++ pour la librairie flatzebra.
+Group: Development/Libraries
+Requires: %{name} = %{version}-%{release}
+
+%description devel
+C++ header files to develop with the flatzebra library.
+
+%description -l fr devel
+En-têtes C++ pour développer avec la librairie flatzebra.
+
+
+%prep
+%setup -q
+
+
+%build
+%configure
+make %{?_smp_mflags}
+
+
+%install
+rm -rf $RPM_BUILD_ROOT
+make install DESTDIR=$RPM_BUILD_ROOT
+
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+
+%post -p /sbin/ldconfig
+
+%postun -p /sbin/ldconfig
+
+
+%files
+%defattr(-,root,root,-)
+%{_libdir}/lib*.so.*
+%doc %{_defaultdocdir}/*
+
+
+%files devel
+%defattr(-,root,root,-)
+%{_includedir}/*
+%{_libdir}/lib*.so
+%{_libdir}/lib*.la
+%{_libdir}/pkgconfig/*
+
+
+%changelog
diff -Nru flatzebra-0.1.5/flatzebra.spec.in flatzebra-0.1.6/flatzebra.spec.in
--- flatzebra-0.1.5/flatzebra.spec.in 1970-01-01 00:00:00.000000000 +0000
+++ flatzebra-0.1.6/flatzebra.spec.in 2012-07-14 03:39:04.000000000 +0000
@@ -0,0 +1,74 @@
+Name: @PACKAGE@
+Version: @VERSION@
+Release: 1%{?dist}
+Summary: @PACKAGE_SUMMARY_EN@
+Summary(fr): @PACKAGE_SUMMARY_FR@
+
+Group: Development/Libraries
+License: GPLv2+
+URL: http://sarrazip.com/dev/burgerspace.html
+Source0: http://sarrazip.com/dev/%{name}-%{version}.tar.gz
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+
+BuildRequires: SDL-devel >= @MINVER_SDL@
+BuildRequires: SDL_image-devel >= @MINVER_SDL_IMAGE@
+BuildRequires: SDL_mixer-devel >= @MINVER_SDL_MIXER@
+
+%description
+Small game engine library required by BurgerSpace and other games.
+
+%description -l fr
+Petit moteur de jeu requis par BurgerSpace et autres jeux.
+
+
+%package devel
+Summary: C++ header files for the @PACKAGE@ library
+Summary(fr): En-têtes C++ pour la librairie @PACKAGE@.
+Group: Development/Libraries
+Requires: %{name} = %{version}-%{release}
+
+%description devel
+C++ header files to develop with the @PACKAGE@ library.
+
+%description -l fr devel
+En-têtes C++ pour développer avec la librairie @PACKAGE@.
+
+
+%prep
+%setup -q
+
+
+%build
+%configure
+make %{?_smp_mflags}
+
+
+%install
+rm -rf $RPM_BUILD_ROOT
+make install DESTDIR=$RPM_BUILD_ROOT
+
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+
+%post -p /sbin/ldconfig
+
+%postun -p /sbin/ldconfig
+
+
+%files
+%defattr(-,root,root,-)
+%{_libdir}/lib*.so.*
+%doc %{_defaultdocdir}/*
+
+
+%files devel
+%defattr(-,root,root,-)
+%{_includedir}/*
+%{_libdir}/lib*.so
+%{_libdir}/lib*.la
+%{_libdir}/pkgconfig/*
+
+
+%changelog
diff -Nru flatzebra-0.1.5/ltmain.sh flatzebra-0.1.6/ltmain.sh
--- flatzebra-0.1.5/ltmain.sh 2010-05-12 01:45:07.000000000 +0000
+++ flatzebra-0.1.6/ltmain.sh 2012-07-06 04:35:07.000000000 +0000
@@ -1,9 +1,9 @@
-# Generated from ltmain.m4sh.
-# ltmain.sh (GNU libtool) 2.2.6b
+# libtool (GNU libtool) 2.4
# Written by Gordon Matzigkeit , 1996
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
@@ -32,50 +32,56 @@
#
# Provide generalized library-building support services.
#
-# --config show all configuration variables
-# --debug enable verbose shell tracing
-# -n, --dry-run display commands without modifying any files
-# --features display basic configuration information and exit
-# --mode=MODE use operation mode MODE
-# --preserve-dup-deps don't remove duplicate dependency libraries
-# --quiet, --silent don't print informational messages
-# --tag=TAG use configuration variables from tag TAG
-# -v, --verbose print informational messages (default)
-# --version print version information
-# -h, --help print short or long help message
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --no-quiet, --no-silent
+# print informational messages (default)
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print more informational messages than default
+# --no-verbose don't print the extra informational messages
+# --version print version information
+# -h, --help, --help-all print short, long, or detailed help message
#
# MODE must be one of the following:
#
-# clean remove files from the build directory
-# compile compile a source file into a libtool object
-# execute automatically set library path, then run a program
-# finish complete the installation of libtool libraries
-# install install libraries or executables
-# link create a library or an executable
-# uninstall remove libraries from an installed directory
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
#
-# MODE-ARGS vary depending on the MODE.
+# MODE-ARGS vary depending on the MODE. When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
#
# When reporting a bug, please describe a test case to reproduce it and
# include the following information:
#
-# host-triplet: $host
-# shell: $SHELL
-# compiler: $LTCC
-# compiler flags: $LTCFLAGS
-# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool) 2.2.6b
-# automake: $automake_version
-# autoconf: $autoconf_version
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.4
+# automake: $automake_version
+# autoconf: $autoconf_version
#
# Report bugs to .
+# GNU libtool home page: .
+# General help using GNU software: .
-PROGRAM=ltmain.sh
+PROGRAM=libtool
PACKAGE=libtool
-VERSION=2.2.6b
+VERSION=2.4
TIMESTAMP=""
-package_revision=1.3017
+package_revision=1.3293
# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -91,10 +97,15 @@
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
# NLS nuisances: We save the old values to restore during execute mode.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
lt_user_locale=
lt_safe_locale=
for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
@@ -107,15 +118,24 @@
lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
fi"
done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
$lt_unset CDPATH
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
: ${CP="cp -f"}
-: ${ECHO="echo"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
: ${EGREP="/bin/grep -E"}
: ${FGREP="/bin/grep -F"}
: ${GREP="/bin/grep"}
@@ -144,6 +164,27 @@
dirname="s,/[^/]*$,,"
basename="s,^.*/,,"
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
# func_dirname_and_basename file append nondir_replacement
# perform func_basename and func_dirname in a single function
# call:
@@ -158,33 +199,183 @@
# those functions but instead duplicate the functionality here.
func_dirname_and_basename ()
{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+ s@/\./@/@g
+ t dotsl
+ s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+# value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test "$func_normal_abspath_tpath" = / ; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result" ; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
}
-# Generated shell functions inserted here.
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+# value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=${func_dirname_result}
+ if test "x$func_relative_path_tlibdir" = x ; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test "x$func_stripname_result" != x ; then
+ func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+ fi
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
+ # Normalisation. If bindir is libdir, return empty string,
+ # else relative path ending with a slash; either way, target
+ # file name can be directly appended.
+ if test ! -z "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result/"
+ func_relative_path_result=$func_stripname_result
+ fi
+}
# The name of this program:
-# In the unlikely event $progname began with a '-', it would play havoc with
-# func_echo (imagine progname=-n), so we prepend ./ in that case:
func_dirname_and_basename "$progpath"
progname=$func_basename_result
-case $progname in
- -*) progname=./$progname ;;
-esac
# Make sure we have an absolute path for reexecution:
case $progpath in
@@ -215,6 +406,15 @@
# Same as above, but do not quote variable references.
double_quote_subst='s/\(["`\\]\)/\\\1/g'
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
# Re-`\' parameter expansions in output of double_quote_subst that were
# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
# in input to double_quote_subst, that '$' was protected from expansion.
@@ -243,7 +443,7 @@
# name if it has been set yet.
func_echo ()
{
- $ECHO "$progname${mode+: }$mode: $*"
+ $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
}
# func_verbose arg...
@@ -258,18 +458,25 @@
:
}
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
# func_error arg...
# Echo program name prefixed message to standard error.
func_error ()
{
- $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
}
# func_warning arg...
# Echo program name prefixed warning message to standard error.
func_warning ()
{
- $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
# bash bug again:
:
@@ -326,9 +533,9 @@
case $my_directory_path in */*) ;; *) break ;; esac
# ...otherwise throw away the child directory and loop
- my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
done
- my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
save_mkdir_p_IFS="$IFS"; IFS=':'
for my_dir in $my_dir_list; do
@@ -378,7 +585,7 @@
func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
fi
- $ECHO "X$my_tmpdir" | $Xsed
+ $ECHO "$my_tmpdir"
}
@@ -392,7 +599,7 @@
{
case $1 in
*[\\\`\"\$]*)
- func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
*)
func_quote_for_eval_unquoted_result="$1" ;;
esac
@@ -419,7 +626,7 @@
{
case $1 in
*[\\\`\"]*)
- my_arg=`$ECHO "X$1" | $Xsed \
+ my_arg=`$ECHO "$1" | $SED \
-e "$double_quote_subst" -e "$sed_double_backslash"` ;;
*)
my_arg="$1" ;;
@@ -488,15 +695,39 @@
fi
}
-
-
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
# func_version
# Echo version message to standard output and exit.
func_version ()
{
- $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+ $opt_debug
+
+ $SED -n '/(C)/!b go
+ :more
+ /\./!{
+ N
+ s/\n# / /
+ b more
+ }
+ :go
+ /^# '$PROGRAM' (GNU /,/# warranty; / {
s/^# //
s/^# *$//
s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
@@ -509,22 +740,28 @@
# Echo short help message to standard output and exit.
func_usage ()
{
- $SED -n '/^# Usage:/,/# -h/ {
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/^# *.*--help/ {
s/^# //
s/^# *$//
s/\$progname/'$progname'/
p
}' < "$progpath"
- $ECHO
+ echo
$ECHO "run \`$progname --help | more' for full usage"
exit $?
}
-# func_help
-# Echo long help message to standard output and exit.
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
func_help ()
{
+ $opt_debug
+
$SED -n '/^# Usage:/,/# Report bugs to/ {
+ :print
s/^# //
s/^# *$//
s*\$progname*'$progname'*
@@ -537,8 +774,15 @@
s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
p
- }' < "$progpath"
- exit $?
+ d
+ }
+ /^# .* home page:/b print
+ /^# General help using/b print
+ ' < "$progpath"
+ ret=$?
+ if test -z "$1"; then
+ exit $ret
+ fi
}
# func_missing_arg argname
@@ -546,63 +790,106 @@
# exit_cmd.
func_missing_arg ()
{
- func_error "missing argument for $1"
+ $opt_debug
+
+ func_error "missing argument for $1."
exit_cmd=exit
}
-exit_cmd=:
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+ my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+ my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+ my_sed_long_arg='1s/^--[^=]*=//'
+
+ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+exit_cmd=:
-# Check that we have a working $ECHO.
-if test "X$1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X$1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
- # Yippee, $ECHO works!
- :
-else
- # Restart under the correct shell, and then maybe $ECHO will work.
- exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-if test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat </dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
# func_fatal_configuration arg...
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
@@ -636,16 +923,16 @@
# Display the features supported by this script.
func_features ()
{
- $ECHO "host: $host"
+ echo "host: $host"
if test "$build_libtool_libs" = yes; then
- $ECHO "enable shared libraries"
+ echo "enable shared libraries"
else
- $ECHO "disable shared libraries"
+ echo "disable shared libraries"
fi
if test "$build_old_libs" = yes; then
- $ECHO "enable static libraries"
+ echo "enable static libraries"
else
- $ECHO "disable static libraries"
+ echo "disable static libraries"
fi
exit $?
@@ -692,117 +979,204 @@
esac
}
-# Parse options once, thoroughly. This comes as soon as possible in
-# the script to make things like `libtool --version' happen quickly.
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+esac
- # Shorthand for --mode=foo, only valid as the first argument
- case $1 in
- clean|clea|cle|cl)
- shift; set dummy --mode clean ${1+"$@"}; shift
- ;;
- compile|compil|compi|comp|com|co|c)
- shift; set dummy --mode compile ${1+"$@"}; shift
- ;;
- execute|execut|execu|exec|exe|ex|e)
- shift; set dummy --mode execute ${1+"$@"}; shift
- ;;
- finish|finis|fini|fin|fi|f)
- shift; set dummy --mode finish ${1+"$@"}; shift
- ;;
- install|instal|insta|inst|ins|in|i)
- shift; set dummy --mode install ${1+"$@"}; shift
- ;;
- link|lin|li|l)
- shift; set dummy --mode link ${1+"$@"}; shift
- ;;
- uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
- shift; set dummy --mode uninstall ${1+"$@"}; shift
- ;;
- esac
- # Parse non-mode specific arguments:
- while test "$#" -gt 0; do
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly. This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+ # this just eases exit handling
+ while test $# -gt 0; do
opt="$1"
shift
-
case $opt in
- --config) func_config ;;
-
- --debug) preserve_args="$preserve_args $opt"
+ --debug|-x) opt_debug='set -x'
func_echo "enabling shell trace mode"
- opt_debug='set -x'
$opt_debug
;;
-
- -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
- execute_dlfiles="$execute_dlfiles $1"
- shift
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
;;
-
- --dry-run | -n) opt_dry_run=: ;;
- --features) func_features ;;
- --finish) mode="finish" ;;
-
- --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
- case $1 in
- # Valid mode arguments:
- clean) ;;
- compile) ;;
- execute) ;;
- finish) ;;
- install) ;;
- link) ;;
- relink) ;;
- uninstall) ;;
-
- # Catch anything else as an error
- *) func_error "invalid argument for $opt"
- exit_cmd=exit
- break
- ;;
- esac
-
- mode="$1"
+ --config)
+ opt_config=:
+func_config
+ ;;
+ --dlopen|-dlopen)
+ optarg="$1"
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
shift
;;
-
--preserve-dup-deps)
- opt_duplicate_deps=: ;;
-
- --quiet|--silent) preserve_args="$preserve_args $opt"
- opt_silent=:
+ opt_preserve_dup_deps=:
;;
-
- --verbose| -v) preserve_args="$preserve_args $opt"
+ --features)
+ opt_features=:
+func_features
+ ;;
+ --finish)
+ opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ --help)
+ opt_help=:
+ ;;
+ --help-all)
+ opt_help_all=:
+opt_help=': help-all'
+ ;;
+ --mode)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_mode="$optarg"
+case $optarg in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+esac
+ shift
+ ;;
+ --no-silent|--no-quiet)
opt_silent=false
+func_append preserve_args " $opt"
;;
-
- --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
- preserve_args="$preserve_args $opt $1"
- func_enable_tag "$1" # tagname is set here
+ --no-verbose)
+ opt_verbose=false
+func_append preserve_args " $opt"
+ ;;
+ --silent|--quiet)
+ opt_silent=:
+func_append preserve_args " $opt"
+ opt_verbose=false
+ ;;
+ --verbose|-v)
+ opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+ ;;
+ --tag)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
shift
;;
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+ --version) func_version ;;
+
# Separate optargs to long options:
- -dlopen=*|--mode=*|--tag=*)
- func_opt_split "$opt"
- set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
+ --*=*)
+ func_split_long_opt "$opt"
+ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
shift
;;
- -\?|-h) func_usage ;;
- --help) opt_help=: ;;
- --version) func_version ;;
-
- -*) func_fatal_help "unrecognized option \`$opt'" ;;
-
- *) nonopt="$opt"
- break
+ # Separate non-argument short options:
+ -\?*|-h*|-n*|-v*)
+ func_split_short_opt "$opt"
+ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+ *) set dummy "$opt" ${1+"$@"}; shift; break ;;
esac
done
+ # Validate options:
+
+ # save first non-option argument
+ if test "$#" -gt 0; then
+ nonopt="$opt"
+ shift
+ fi
+
+ # preserve --debug
+ test "$opt_debug" = : || func_append preserve_args " --debug"
case $host in
*cygwin* | *mingw* | *pw32* | *cegcc*)
@@ -810,82 +1184,44 @@
opt_duplicate_compiler_generated_deps=:
;;
*)
- opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
;;
esac
- # Having warned about all mis-specified options, bail out if
- # anything was wrong.
- $exit_cmd $EXIT_FAILURE
-}
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
-# func_check_version_match
-# Ensure that we are using m4 macros, and libtool script from the same
-# release of libtool.
-func_check_version_match ()
-{
- if test "$package_revision" != "$macro_revision"; then
- if test "$VERSION" != "$macro_version"; then
- if test -z "$macro_version"; then
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from an older release.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
- else
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
- fi
- else
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
fi
- exit $EXIT_MISMATCH
- fi
-}
-
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
-## ----------- ##
-## Main. ##
-## ----------- ##
-
-$opt_help || {
- # Sanity checks first:
- func_check_version_match
-
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- func_fatal_configuration "not configured to build any kind of library"
- fi
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
- test -z "$mode" && func_fatal_error "error: you must specify a MODE."
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$opt_mode' for more information."
+ }
- # Darwin sucks
- eval std_shrext=\"$shrext_cmds\"
+ # Bail if the options were screwed
+ $exit_cmd $EXIT_FAILURE
+}
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- func_error "unrecognized option \`-dlopen'"
- $ECHO "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$progname --help --mode=$mode' for more information."
-}
+## ----------- ##
+## Main. ##
+## ----------- ##
# func_lalib_p file
# True iff FILE is a libtool `.la' library or `.lo' object file.
@@ -950,12 +1286,9 @@
# temporary ltwrapper_script.
func_ltwrapper_scriptname ()
{
- func_ltwrapper_scriptname_result=""
- if func_ltwrapper_executable_p "$1"; then
- func_dirname_and_basename "$1" "" "."
- func_stripname '' '.exe' "$func_basename_result"
- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
- fi
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
}
# func_ltwrapper_p file
@@ -1001,6 +1334,37 @@
}
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot. Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+ func_resolve_sysroot_result=$1
+ case $func_resolve_sysroot_result in
+ =*)
+ func_stripname '=' '' "$func_resolve_sysroot_result"
+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+ ;;
+ esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+ case "$lt_sysroot:$1" in
+ ?*:"$lt_sysroot"*)
+ func_stripname "$lt_sysroot" '' "$1"
+ func_replace_sysroot_result="=$func_stripname_result"
+ ;;
+ *)
+ # Including no sysroot.
+ func_replace_sysroot_result=$1
+ ;;
+ esac
+}
+
# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
@@ -1013,13 +1377,15 @@
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
- func_quote_for_eval "$arg"
- CC_quoted="$CC_quoted $func_quote_for_eval_result"
+ func_append_quoted CC_quoted "$arg"
done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
case $@ in
# Blanks in the command may have been stripped by the calling shell,
# but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
# Blanks at the start of $base_compile will cause this to fail
# if we don't check for them as well.
*)
@@ -1030,11 +1396,13 @@
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
- func_quote_for_eval "$arg"
- CC_quoted="$CC_quoted $func_quote_for_eval_result"
+ func_append_quoted CC_quoted "$arg"
done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
case "$@ " in
- " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
# The compiler in the base compile command matches
# the one in the tagged configuration.
# Assume this is the tagged configuration we want.
@@ -1097,6 +1465,486 @@
}
}
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+ $opt_debug
+ func_convert_core_file_wine_to_w32_result="$1"
+ if test -n "$1"; then
+ # Unfortunately, winepath does not exit with a non-zero error code, so we
+ # are forced to check the contents of stdout. On the other hand, if the
+ # command is not found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both error code of
+ # zero AND non-empty stdout, which explains the odd construction:
+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ func_convert_core_file_wine_to_w32_result=
+ fi
+ fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+ $opt_debug
+ # unfortunately, winepath doesn't convert paths, only file names
+ func_convert_core_path_wine_to_w32_result=""
+ if test -n "$1"; then
+ oldIFS=$IFS
+ IFS=:
+ for func_convert_core_path_wine_to_w32_f in $1; do
+ IFS=$oldIFS
+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+ if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -z "$func_convert_core_path_wine_to_w32_result"; then
+ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ else
+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+ fi
+ fi
+ done
+ IFS=$oldIFS
+ fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+ $opt_debug
+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+ if test "$?" -ne 0; then
+ # on failure, ensure result is empty
+ func_cygpath_result=
+ fi
+ else
+ func_cygpath_result=
+ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format. Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+ $opt_debug
+ # awkward: cmd appends spaces to result
+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+ $opt_debug
+ if test -z "$2" && test -n "$1" ; then
+ func_error "Could not determine host file name corresponding to"
+ func_error " \`$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_file_result="$1"
+ fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+ $opt_debug
+ if test -z "$4" && test -n "$3"; then
+ func_error "Could not determine the host path corresponding to"
+ func_error " \`$3'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This is a deliberately simplistic "conversion" and
+ # should not be "improved". See libtool.info.
+ if test "x$1" != "x$2"; then
+ lt_replace_pathsep_chars="s|$1|$2|g"
+ func_to_host_path_result=`echo "$3" |
+ $SED -e "$lt_replace_pathsep_chars"`
+ else
+ func_to_host_path_result="$3"
+ fi
+ fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+ $opt_debug
+ case $4 in
+ $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ ;;
+ esac
+ case $4 in
+ $2 ) func_append func_to_host_path_result "$3"
+ ;;
+ esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+ $opt_debug
+ $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result. If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+ $opt_debug
+ case ,$2, in
+ *,"$to_tool_file_cmd",*)
+ func_to_tool_file_result=$1
+ ;;
+ *)
+ $to_tool_file_cmd "$1"
+ func_to_tool_file_result=$func_to_host_file_result
+ ;;
+ esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+ func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+ # LT_CYGPATH in this case.
+ func_to_host_file_result=`cygpath -m "$1"`
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format. Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_file_wine_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+ func_convert_core_file_wine_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format. If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+# file name conversion function : func_convert_file_X_to_Y ()
+# path conversion function : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same. If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+ $opt_debug
+ if test -z "$to_host_path_cmd"; then
+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+ to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+ $opt_debug
+ func_init_to_host_path_cmd
+ $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+ func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from ARG. MSYS
+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+ # and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format. Requires a wine environment and
+# a working winepath. Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
# func_mode_compile arg...
func_mode_compile ()
{
@@ -1137,12 +1985,12 @@
;;
-pie | -fpie | -fPIE)
- pie_flag="$pie_flag $arg"
+ func_append pie_flag " $arg"
continue
;;
-shared | -static | -prefer-pic | -prefer-non-pic)
- later="$later $arg"
+ func_append later " $arg"
continue
;;
@@ -1163,15 +2011,14 @@
save_ifs="$IFS"; IFS=','
for arg in $args; do
IFS="$save_ifs"
- func_quote_for_eval "$arg"
- lastarg="$lastarg $func_quote_for_eval_result"
+ func_append_quoted lastarg "$arg"
done
IFS="$save_ifs"
func_stripname ' ' '' "$lastarg"
lastarg=$func_stripname_result
# Add the arguments to base_compile.
- base_compile="$base_compile $lastarg"
+ func_append base_compile " $lastarg"
continue
;;
@@ -1187,8 +2034,7 @@
esac # case $arg_mode
# Aesthetically quote the previous argument.
- func_quote_for_eval "$lastarg"
- base_compile="$base_compile $func_quote_for_eval_result"
+ func_append_quoted base_compile "$lastarg"
done # for arg
case $arg_mode in
@@ -1213,7 +2059,7 @@
*.[cCFSifmso] | \
*.ada | *.adb | *.ads | *.asm | \
*.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
- *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+ *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
func_xform "$libobj"
libobj=$func_xform_result
;;
@@ -1288,7 +2134,7 @@
# Calculate the filename of the output object if compiler does
# not support -o with -c
if test "$compiler_c_o" = no; then
- output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
lockfile="$output_obj.lock"
else
output_obj=
@@ -1319,17 +2165,16 @@
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
- removelist="$removelist $output_obj"
+ func_append removelist " $output_obj"
$ECHO "$srcfile" > "$lockfile"
fi
$opt_dry_run || $RM $removelist
- removelist="$removelist $lockfile"
+ func_append removelist " $lockfile"
trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
- if test -n "$fix_srcfile_path"; then
- eval srcfile=\"$fix_srcfile_path\"
- fi
+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+ srcfile=$func_to_tool_file_result
func_quote_for_eval "$srcfile"
qsrcfile=$func_quote_for_eval_result
@@ -1349,7 +2194,7 @@
if test -z "$output_obj"; then
# Place PIC objects in $objdir
- command="$command -o $lobj"
+ func_append command " -o $lobj"
fi
func_show_eval_locale "$command" \
@@ -1396,11 +2241,11 @@
command="$base_compile $qsrcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
- command="$command -o $obj"
+ func_append command " -o $obj"
fi
# Suppress compiler output if we already did a PIC compilation.
- command="$command$suppress_output"
+ func_append command "$suppress_output"
func_show_eval_locale "$command" \
'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
@@ -1445,13 +2290,13 @@
}
$opt_help || {
-test "$mode" = compile && func_mode_compile ${1+"$@"}
+ test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
}
func_mode_help ()
{
# We need to display help for each of the modes.
- case $mode in
+ case $opt_mode in
"")
# Generic help is extracted from the usage comments
# at the start of this file.
@@ -1482,10 +2327,11 @@
-o OUTPUT-FILE set the output file name to OUTPUT-FILE
-no-suppress do not suppress compiler output for multiple passes
- -prefer-pic try to building PIC objects only
- -prefer-non-pic try to building non-PIC objects only
+ -prefer-pic try to build PIC objects only
+ -prefer-non-pic try to build non-PIC objects only
-shared do not build a \`.o' file suitable for static linking
-static only build a \`.o' file suitable for static linking
+ -Wc,FLAG pass FLAG directly to the compiler
COMPILE-COMMAND is a command to be used in creating a \`standard' object file
from the given SOURCEFILE.
@@ -1538,7 +2384,7 @@
The following components of INSTALL-COMMAND are treated specially:
- -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
The rest of the components are interpreted as arguments to that command (only
BSD-compatible install options are recognized)."
@@ -1558,6 +2404,8 @@
-all-static do not do any dynamic linking at all
-avoid-version do not add a version suffix if possible
+ -bindir BINDIR specify path to binaries directory (for systems where
+ libraries must be found in the PATH setting at runtime)
-dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
@@ -1586,6 +2434,11 @@
-version-info CURRENT[:REVISION[:AGE]]
specify library version info [each variable defaults to 0]
-weak LIBNAME declare that the target provides the LIBNAME interface
+ -Wc,FLAG
+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
+ -Wl,FLAG
+ -Xlinker FLAG pass linker-specific FLAG directly to the linker
+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
All other options (arguments beginning with \`-') are ignored.
@@ -1619,18 +2472,44 @@
;;
*)
- func_fatal_help "invalid operation mode \`$mode'"
+ func_fatal_help "invalid operation mode \`$opt_mode'"
;;
esac
- $ECHO
+ echo
$ECHO "Try \`$progname --help' for more information about other modes."
-
- exit $?
}
- # Now that we've collected a possible --mode arg, show help if necessary
- $opt_help && func_mode_help
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+ if test "$opt_help" = :; then
+ func_mode_help
+ else
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ func_mode_help
+ done
+ } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ echo
+ func_mode_help
+ done
+ } |
+ sed '1d
+ /^When reporting/,/^Report/{
+ H
+ d
+ }
+ $x
+ /information about other modes/d
+ /more detailed .*MODE/d
+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+ fi
+ exit $?
+fi
# func_mode_execute arg...
@@ -1643,13 +2522,16 @@
func_fatal_help "you must specify a COMMAND"
# Handle -dlopen flags immediately.
- for file in $execute_dlfiles; do
+ for file in $opt_dlopen; do
test -f "$file" \
|| func_fatal_help "\`$file' is not a file"
dir=
case $file in
*.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
|| func_fatal_help "\`$lib' is not a valid libtool archive"
@@ -1671,7 +2553,7 @@
dir="$func_dirname_result"
if test -f "$dir/$objdir/$dlname"; then
- dir="$dir/$objdir"
+ func_append dir "/$objdir"
else
if test ! -f "$dir/$dlname"; then
func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
@@ -1712,7 +2594,7 @@
for file
do
case $file in
- -*) ;;
+ -* | *.la | *.lo ) ;;
*)
# Do a test to see if this is really a libtool program.
if func_ltwrapper_script_p "$file"; then
@@ -1728,8 +2610,7 @@
;;
esac
# Quote arguments (to preserve shell metacharacters).
- func_quote_for_eval "$file"
- args="$args $func_quote_for_eval_result"
+ func_append_quoted args "$file"
done
if test "X$opt_dry_run" = Xfalse; then
@@ -1754,29 +2635,66 @@
# Display what would be done.
if test -n "$shlibpath_var"; then
eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
- $ECHO "export $shlibpath_var"
+ echo "export $shlibpath_var"
fi
$ECHO "$cmd$args"
exit $EXIT_SUCCESS
fi
}
-test "$mode" = execute && func_mode_execute ${1+"$@"}
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $opt_debug
+ libs=
+ libdirs=
+ admincmds=
+
+ for opt in "$nonopt" ${1+"$@"}
+ do
+ if test -d "$opt"; then
+ func_append libdirs " $opt"
+
+ elif test -f "$opt"; then
+ if func_lalib_unsafe_p "$opt"; then
+ func_append libs " $opt"
+ else
+ func_warning "\`$opt' is not a valid libtool archive"
+ fi
+
+ else
+ func_fatal_error "invalid argument \`$opt'"
+ fi
+ done
+ if test -n "$libs"; then
+ if test -n "$lt_sysroot"; then
+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+ else
+ sysroot_cmd=
+ fi
-# func_mode_finish arg...
-func_mode_finish ()
-{
- $opt_debug
- libdirs="$nonopt"
- admincmds=
+ # Remove sysroot references
+ if $opt_dry_run; then
+ for lib in $libs; do
+ echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ done
+ else
+ tmpdir=`func_mktempdir`
+ for lib in $libs; do
+ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ > $tmpdir/tmp-la
+ mv -f $tmpdir/tmp-la $lib
+ done
+ ${RM}r "$tmpdir"
+ fi
+ fi
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for dir
- do
- libdirs="$libdirs $dir"
- done
-
for libdir in $libdirs; do
if test -n "$finish_cmds"; then
# Do each command in the finish commands.
@@ -1786,7 +2704,7 @@
if test -n "$finish_eval"; then
# Do the single finish_eval.
eval cmds=\"$finish_eval\"
- $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+ $opt_dry_run || eval "$cmds" || func_append admincmds "
$cmds"
fi
done
@@ -1795,53 +2713,55 @@
# Exit here if they wanted silent mode.
$opt_silent && exit $EXIT_SUCCESS
- $ECHO "X----------------------------------------------------------------------" | $Xsed
- $ECHO "Libraries have been installed in:"
- for libdir in $libdirs; do
- $ECHO " $libdir"
- done
- $ECHO
- $ECHO "If you ever happen to want to link against installed libraries"
- $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
- $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
- $ECHO "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable"
- $ECHO " during execution"
- fi
- if test -n "$runpath_var"; then
- $ECHO " - add LIBDIR to the \`$runpath_var' environment variable"
- $ECHO " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ echo "----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
- $ECHO " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
- $ECHO " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- $ECHO
+ $ECHO " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ echo
- $ECHO "See any operating system documentation about shared libraries for"
- case $host in
- solaris2.[6789]|solaris2.1[0-9])
- $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
- $ECHO "pages."
- ;;
- *)
- $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
- ;;
- esac
- $ECHO "X----------------------------------------------------------------------" | $Xsed
+ echo "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ echo "pages."
+ ;;
+ *)
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ echo "----------------------------------------------------------------------"
+ fi
exit $EXIT_SUCCESS
}
-test "$mode" = finish && func_mode_finish ${1+"$@"}
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
# func_mode_install arg...
@@ -1852,7 +2772,7 @@
# install_prog (especially on Windows NT).
if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
# Allow the use of GNU shtool's install command.
- $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+ case $nonopt in *shtool*) :;; *) false;; esac; then
# Aesthetically quote it.
func_quote_for_eval "$nonopt"
install_prog="$func_quote_for_eval_result "
@@ -1866,7 +2786,12 @@
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
func_quote_for_eval "$arg"
- install_prog="$install_prog$func_quote_for_eval_result"
+ func_append install_prog "$func_quote_for_eval_result"
+ install_shared_prog=$install_prog
+ case " $install_prog " in
+ *[\\\ /]cp\ *) install_cp=: ;;
+ *) install_cp=false ;;
+ esac
# We need to accept at least all the BSD install flags.
dest=
@@ -1876,10 +2801,12 @@
install_type=
isdir=no
stripme=
+ no_mode=:
for arg
do
+ arg2=
if test -n "$dest"; then
- files="$files $dest"
+ func_append files " $dest"
dest=$arg
continue
fi
@@ -1887,10 +2814,9 @@
case $arg in
-d) isdir=yes ;;
-f)
- case " $install_prog " in
- *[\\\ /]cp\ *) ;;
- *) prev=$arg ;;
- esac
+ if $install_cp; then :; else
+ prev=$arg
+ fi
;;
-g | -m | -o)
prev=$arg
@@ -1904,6 +2830,10 @@
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
+ if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ arg2=$install_override_mode
+ no_mode=false
+ fi
prev=
else
dest=$arg
@@ -1914,7 +2844,11 @@
# Aesthetically quote the argument.
func_quote_for_eval "$arg"
- install_prog="$install_prog $func_quote_for_eval_result"
+ func_append install_prog " $func_quote_for_eval_result"
+ if test -n "$arg2"; then
+ func_quote_for_eval "$arg2"
+ fi
+ func_append install_shared_prog " $func_quote_for_eval_result"
done
test -z "$install_prog" && \
@@ -1923,6 +2857,13 @@
test -n "$prev" && \
func_fatal_help "the \`$prev' option requires an argument"
+ if test -n "$install_override_mode" && $no_mode; then
+ if $install_cp; then :; else
+ func_quote_for_eval "$install_override_mode"
+ func_append install_shared_prog " -m $func_quote_for_eval_result"
+ fi
+ fi
+
if test -z "$files"; then
if test -z "$dest"; then
func_fatal_help "no file or destination specified"
@@ -1977,10 +2918,13 @@
case $file in
*.$libext)
# Do the static libraries later.
- staticlibs="$staticlibs $file"
+ func_append staticlibs " $file"
;;
*.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
|| func_fatal_help "\`$file' is not a valid libtool archive"
@@ -1994,23 +2938,23 @@
if test "X$destdir" = "X$libdir"; then
case "$current_libdirs " in
*" $libdir "*) ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
+ *) func_append current_libdirs " $libdir" ;;
esac
else
# Note the libdir as a future libdir.
case "$future_libdirs " in
*" $libdir "*) ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
+ *) func_append future_libdirs " $libdir" ;;
esac
fi
func_dirname "$file" "/" ""
dir="$func_dirname_result"
- dir="$dir$objdir"
+ func_append dir "$objdir"
if test -n "$relink_command"; then
# Determine the prefix the user has applied to our future dir.
- inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
# Don't allow the user to place us outside of our expected
# location b/c this prevents finding dependent libraries that
@@ -2023,9 +2967,9 @@
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
- relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
else
- relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
fi
func_warning "relinking \`$file'"
@@ -2043,7 +2987,7 @@
test -n "$relink_command" && srcname="$realname"T
# Install the shared library and build the symlinks.
- func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
+ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
'exit $?'
tstripme="$stripme"
case $host_os in
@@ -2083,7 +3027,7 @@
func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
# Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
;;
*.lo)
@@ -2183,7 +3127,7 @@
if test -f "$lib"; then
func_source "$lib"
fi
- libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
if test -n "$libdir" && test ! -f "$libfile"; then
func_warning "\`$lib' has not been installed in \`$libdir'"
finalize=no
@@ -2202,7 +3146,7 @@
file="$func_basename_result"
outputname="$tmpdir/$file"
# Replace the output file specification.
- relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
$opt_silent || {
func_quote_for_expand "$relink_command"
@@ -2221,7 +3165,7 @@
}
else
# Install the binary that we compiled earlier.
- file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
fi
fi
@@ -2280,7 +3224,7 @@
fi
}
-test "$mode" = install && func_mode_install ${1+"$@"}
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
# func_generate_dlsyms outputname originator pic_p
@@ -2323,6 +3267,22 @@
extern \"C\" {
#endif
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
/* External symbol declarations for the compiler. */\
"
@@ -2332,10 +3292,11 @@
$opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
# Add our own program objects to the symbol list.
- progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
for progfile in $progfiles; do
- func_verbose "extracting global C symbols from \`$progfile'"
- $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
done
if test -n "$exclude_expsyms"; then
@@ -2371,7 +3332,7 @@
eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
case $host in
- *cygwin | *mingw* | *cegcc* )
+ *cygwin* | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
;;
@@ -2384,10 +3345,52 @@
func_verbose "extracting global C symbols from \`$dlprefile'"
func_basename "$dlprefile"
name="$func_basename_result"
- $opt_dry_run || {
- eval '$ECHO ": $name " >> "$nlist"'
- eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
- }
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ # if an import library, we need to obtain dlname
+ if func_win32_import_lib_p "$dlprefile"; then
+ func_tr_sh "$dlprefile"
+ eval "curr_lafile=\$libfile_$func_tr_sh_result"
+ dlprefile_dlbasename=""
+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+ # Use subshell, to avoid clobbering current variable values
+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+ if test -n "$dlprefile_dlname" ; then
+ func_basename "$dlprefile_dlname"
+ dlprefile_dlbasename="$func_basename_result"
+ else
+ # no lafile. user explicitly requested -dlpreopen .
+ $sharedlib_from_linklib_cmd "$dlprefile"
+ dlprefile_dlbasename=$sharedlib_from_linklib_result
+ fi
+ fi
+ $opt_dry_run || {
+ if test -n "$dlprefile_dlbasename" ; then
+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+ else
+ func_warning "Could not compute DLL name from $name"
+ eval '$ECHO ": $name " >> "$nlist"'
+ fi
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+ }
+ else # not an import lib
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ fi
+ ;;
+ *)
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ ;;
+ esac
done
$opt_dry_run || {
@@ -2415,36 +3418,19 @@
if test -f "$nlist"S; then
eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
else
- $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
fi
- $ECHO >> "$output_objdir/$my_dlsyms" "\
+ echo >> "$output_objdir/$my_dlsyms" "\
/* The mapping between symbol names and symbols. */
typedef struct {
const char *name;
void *address;
} lt_dlsymlist;
-"
- case $host in
- *cygwin* | *mingw* | *cegcc* )
- $ECHO >> "$output_objdir/$my_dlsyms" "\
-/* DATA imports from DLLs on WIN32 con't be const, because
- runtime relocations are performed -- see ld's documentation
- on pseudo-relocs. */"
- lt_dlsym_const= ;;
- *osf5*)
- echo >> "$output_objdir/$my_dlsyms" "\
-/* This system does not cope well with relocations in const data */"
- lt_dlsym_const= ;;
- *)
- lt_dlsym_const=const ;;
- esac
-
- $ECHO >> "$output_objdir/$my_dlsyms" "\
-extern $lt_dlsym_const lt_dlsymlist
+extern LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[];
-$lt_dlsym_const lt_dlsymlist
+LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[] =
{\
{ \"$my_originator\", (void *) 0 },"
@@ -2457,7 +3443,7 @@
eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
;;
esac
- $ECHO >> "$output_objdir/$my_dlsyms" "\
+ echo >> "$output_objdir/$my_dlsyms" "\
{0, (void *) 0}
};
@@ -2500,7 +3486,7 @@
for arg in $LTCFLAGS; do
case $arg in
-pie | -fpie | -fPIE) ;;
- *) symtab_cflags="$symtab_cflags $arg" ;;
+ *) func_append symtab_cflags " $arg" ;;
esac
done
@@ -2515,16 +3501,16 @@
case $host in
*cygwin* | *mingw* | *cegcc* )
if test -f "$output_objdir/$my_outputname.def"; then
- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
else
- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
fi
;;
*)
- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
;;
esac
;;
@@ -2538,8 +3524,8 @@
# really was required.
# Nullify the symbol file.
- compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
fi
}
@@ -2549,6 +3535,7 @@
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
func_win32_libid ()
{
$opt_debug
@@ -2559,9 +3546,11 @@
win32_libid_type="x86 archive import"
;;
*ar\ archive*) # could be an import, or static
+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
- $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
- win32_nmres=`eval $NM -f posix -A $1 |
+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
$SED -n -e '
1,100{
/ I /{
@@ -2590,6 +3579,131 @@
$ECHO "$win32_libid_type"
}
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+ $opt_debug
+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+ $opt_debug
+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+ $SED '/^Contents of section '"$match_literal"':/{
+ # Place marker at beginning of archive member dllname section
+ s/.*/====MARK====/
+ p
+ d
+ }
+ # These lines can sometimes be longer than 43 characters, but
+ # are always uninteresting
+ /:[ ]*file format pe[i]\{,1\}-/d
+ /^In archive [^:]*:/d
+ # Ensure marker is printed
+ /^====MARK====/p
+ # Remove all lines with less than 43 characters
+ /^.\{43\}/!d
+ # From remaining lines, remove first 43 characters
+ s/^.\{43\}//' |
+ $SED -n '
+ # Join marker and all lines until next marker into a single line
+ /^====MARK====/ b para
+ H
+ $ b para
+ b
+ :para
+ x
+ s/\n//g
+ # Remove the marker
+ s/^====MARK====//
+ # Remove trailing dots and whitespace
+ s/[\. \t]*$//
+ # Print
+ /./p' |
+ # we now have a list, one entry per line, of the stringified
+ # contents of the appropriate section of all members of the
+ # archive which possess that section. Heuristic: eliminate
+ # all those which have a first or second character that is
+ # a '.' (that is, objdump's representation of an unprintable
+ # character.) This should work for all archives with less than
+ # 0x302f exports -- but will fail for DLLs whose name actually
+ # begins with a literal '.' or a single character followed by
+ # a '.'.
+ #
+ # Of those that remain, print the first one.
+ $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+ $opt_debug
+ if func_cygming_gnu_implib_p "$1" ; then
+ # binutils import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+ elif func_cygming_ms_implib_p "$1" ; then
+ # ms-generated import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+ else
+ # unknown
+ sharedlib_from_linklib_result=""
+ fi
+}
# func_extract_an_archive dir oldlib
@@ -2598,7 +3712,18 @@
$opt_debug
f_ex_an_ar_dir="$1"; shift
f_ex_an_ar_oldlib="$1"
- func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+ if test "$lock_old_archive_extraction" = yes; then
+ lockfile=$f_ex_an_ar_oldlib.lock
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ fi
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+ 'stat=$?; rm -f "$lockfile"; exit $stat'
+ if test "$lock_old_archive_extraction" = yes; then
+ $opt_dry_run || rm -f "$lockfile"
+ fi
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
:
else
@@ -2669,7 +3794,7 @@
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
$LIPO -create -output "$darwin_file" $darwin_files
done # $darwin_filelist
$RM -rf unfat-$$
@@ -2684,25 +3809,30 @@
func_extract_an_archive "$my_xdir" "$my_xabs"
;;
esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
done
func_extract_archives_result="$my_oldobjs"
}
-
-# func_emit_wrapper_part1 [arg=no]
+# func_emit_wrapper [arg=no]
#
-# Emit the first part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part1 ()
-{
- func_emit_wrapper_part1_arg1=no
- if test -n "$1" ; then
- func_emit_wrapper_part1_arg1=$1
- fi
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=${1-no}
$ECHO "\
#! $SHELL
@@ -2718,7 +3848,6 @@
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
# Be Bourne compatible
@@ -2749,31 +3878,132 @@
else
# When we are sourced in execute mode, \$file and \$ECHO are already set.
if test \"\$libtool_execute_magic\" != \"$magic\"; then
- ECHO=\"$qecho\"
- file=\"\$0\"
- # Make sure echo works.
- if test \"X\$1\" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
- elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
- # Yippee, \$ECHO works!
- :
- else
- # Restart under the correct shell, and then maybe \$ECHO will work.
- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
- fi
- fi\
+ file=\"\$0\""
+
+ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+ $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+ ECHO=\"$qECHO\"
+ fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+ lt_script_arg0=\$0
+ shift
+ for lt_opt
+ do
+ case \"\$lt_opt\" in
+ --lt-debug) lt_option_debug=1 ;;
+ --lt-dump-script)
+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+ cat \"\$lt_dump_D/\$lt_dump_F\"
+ exit 0
+ ;;
+ --lt-*)
+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ # Print the debug banner immediately:
+ if test -n \"\$lt_option_debug\"; then
+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+ lt_dump_args_N=1;
+ for lt_arg
+ do
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+ done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
"
- $ECHO "\
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+ for lt_wr_arg
+ do
+ case \$lt_wr_arg in
+ --lt-*) ;;
+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+ esac
+ shift
+ done
+ func_exec_program_core \${1+\"\$@\"}
+}
+
+ # Parse options
+ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
# Find the directory that this script lives in.
- thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
test \"x\$thisdir\" = \"x\$file\" && thisdir=.
# Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
while test -n \"\$file\"; do
- destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
# If there was a directory component, then change thisdir.
if test \"x\$destdir\" != \"x\$file\"; then
@@ -2783,30 +4013,13 @@
esac
fi
- file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
done
-"
-}
-# end: func_emit_wrapper_part1
-
-# func_emit_wrapper_part2 [arg=no]
-#
-# Emit the second part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part2 ()
-{
- func_emit_wrapper_part2_arg1=no
- if test -n "$1" ; then
- func_emit_wrapper_part2_arg1=$1
- fi
-
- $ECHO "\
# Usually 'no', except on cygwin/mingw when embedded into
# the cwrapper.
- WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
# special case for '.'
if test \"\$thisdir\" = \".\"; then
@@ -2814,7 +4027,7 @@
fi
# remove .libs from thisdir
case \"\$thisdir\" in
- *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
$objdir ) thisdir=. ;;
esac
fi
@@ -2869,6 +4082,18 @@
if test -f \"\$progdir/\$program\"; then"
+ # fixup the dll searchpath if we need to.
+ #
+ # Fix the DLL searchpath if we need to. Do this before prepending
+ # to shlibpath, because on Windows, both are PATH and uninstalled
+ # libraries must come first.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
# Export our shlibpath_var if we have one.
if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
$ECHO "\
@@ -2877,253 +4102,28 @@
# Some systems cannot cope with colon-terminated $shlibpath_var
# The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
export $shlibpath_var
"
fi
- # fixup the dll searchpath if we need to.
- if test -n "$dllsearchpath"; then
- $ECHO "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
$ECHO "\
if test \"\$libtool_execute_magic\" != \"$magic\"; then
# Run the actual program with our arguments.
-"
- case $host in
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2* | *-cegcc*)
- $ECHO "\
- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
- ;;
-
- *)
- $ECHO "\
- exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
- ;;
- esac
- $ECHO "\
- \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
- exit 1
+ func_exec_program \${1+\"\$@\"}
fi
else
# The program doesn't exist.
\$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
\$ECHO \"This script is just a wrapper for \$program.\" 1>&2
- $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
- exit 1
- fi
-fi\
-"
-}
-# end: func_emit_wrapper_part2
-
-
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable. Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
-#
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take. If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory. This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
-{
- func_emit_wrapper_arg1=no
- if test -n "$1" ; then
- func_emit_wrapper_arg1=$1
- fi
-
- # split this up so that func_emit_cwrapperexe_src
- # can call each part independently.
- func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
- func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
-}
-
-
-# func_to_host_path arg
-#
-# Convert paths to host format when used with build tools.
-# Intended for use with "native" mingw (where libtool itself
-# is running under the msys shell), or in the following cross-
-# build environments:
-# $build $host
-# mingw (msys) mingw [e.g. native]
-# cygwin mingw
-# *nix + wine mingw
-# where wine is equipped with the `winepath' executable.
-# In the native mingw case, the (msys) shell automatically
-# converts paths for any non-msys applications it launches,
-# but that facility isn't available from inside the cwrapper.
-# Similar accommodations are necessary for $host mingw and
-# $build cygwin. Calling this function does no harm for other
-# $host/$build combinations not listed above.
-#
-# ARG is the path (on $build) that should be converted to
-# the proper representation for $host. The result is stored
-# in $func_to_host_path_result.
-func_to_host_path ()
-{
- func_to_host_path_result="$1"
- if test -n "$1" ; then
- case $host in
- *mingw* )
- lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
- case $build in
- *mingw* ) # actually, msys
- # awkward: cmd appends spaces to result
- lt_sed_strip_trailing_spaces="s/[ ]*\$//"
- func_to_host_path_tmp1=`( cmd //c echo "$1" |\
- $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
- func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
- $SED -e "$lt_sed_naive_backslashify"`
- ;;
- *cygwin* )
- func_to_host_path_tmp1=`cygpath -w "$1"`
- func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
- $SED -e "$lt_sed_naive_backslashify"`
- ;;
- * )
- # Unfortunately, winepath does not exit with a non-zero
- # error code, so we are forced to check the contents of
- # stdout. On the other hand, if the command is not
- # found, the shell will set an exit code of 127 and print
- # *an error message* to stdout. So we must check for both
- # error code of zero AND non-empty stdout, which explains
- # the odd construction:
- func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
- if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
- func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
- $SED -e "$lt_sed_naive_backslashify"`
- else
- # Allow warning below.
- func_to_host_path_result=""
- fi
- ;;
- esac
- if test -z "$func_to_host_path_result" ; then
- func_error "Could not determine host path corresponding to"
- func_error " '$1'"
- func_error "Continuing, but uninstalled executables may not work."
- # Fallback:
- func_to_host_path_result="$1"
- fi
- ;;
- esac
- fi
-}
-# end: func_to_host_path
-
-# func_to_host_pathlist arg
-#
-# Convert pathlists to host format when used with build tools.
-# See func_to_host_path(), above. This function supports the
-# following $build/$host combinations (but does no harm for
-# combinations not listed here):
-# $build $host
-# mingw (msys) mingw [e.g. native]
-# cygwin mingw
-# *nix + wine mingw
-#
-# Path separators are also converted from $build format to
-# $host format. If ARG begins or ends with a path separator
-# character, it is preserved (but converted to $host format)
-# on output.
-#
-# ARG is a pathlist (on $build) that should be converted to
-# the proper representation on $host. The result is stored
-# in $func_to_host_pathlist_result.
-func_to_host_pathlist ()
-{
- func_to_host_pathlist_result="$1"
- if test -n "$1" ; then
- case $host in
- *mingw* )
- lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
- # Remove leading and trailing path separator characters from
- # ARG. msys behavior is inconsistent here, cygpath turns them
- # into '.;' and ';.', and winepath ignores them completely.
- func_to_host_pathlist_tmp2="$1"
- # Once set for this call, this variable should not be
- # reassigned. It is used in tha fallback case.
- func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
- $SED -e 's|^:*||' -e 's|:*$||'`
- case $build in
- *mingw* ) # Actually, msys.
- # Awkward: cmd appends spaces to result.
- lt_sed_strip_trailing_spaces="s/[ ]*\$//"
- func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
- $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
- func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
- $SED -e "$lt_sed_naive_backslashify"`
- ;;
- *cygwin* )
- func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
- func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
- $SED -e "$lt_sed_naive_backslashify"`
- ;;
- * )
- # unfortunately, winepath doesn't convert pathlists
- func_to_host_pathlist_result=""
- func_to_host_pathlist_oldIFS=$IFS
- IFS=:
- for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
- IFS=$func_to_host_pathlist_oldIFS
- if test -n "$func_to_host_pathlist_f" ; then
- func_to_host_path "$func_to_host_pathlist_f"
- if test -n "$func_to_host_path_result" ; then
- if test -z "$func_to_host_pathlist_result" ; then
- func_to_host_pathlist_result="$func_to_host_path_result"
- else
- func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
- fi
- fi
- fi
- IFS=:
- done
- IFS=$func_to_host_pathlist_oldIFS
- ;;
- esac
- if test -z "$func_to_host_pathlist_result" ; then
- func_error "Could not determine the host path(s) corresponding to"
- func_error " '$1'"
- func_error "Continuing, but uninstalled executables may not work."
- # Fallback. This may break if $1 contains DOS-style drive
- # specifications. The fix is not to complicate the expression
- # below, but for the user to provide a working wine installation
- # with winepath so that path translation in the cross-to-mingw
- # case works properly.
- lt_replace_pathsep_nix_to_dos="s|:|;|g"
- func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
- $SED -e "$lt_replace_pathsep_nix_to_dos"`
- fi
- # Now, add the leading and trailing path separators back
- case "$1" in
- :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
- ;;
- esac
- case "$1" in
- *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
- ;;
- esac
- ;;
- esac
+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
fi
+fi\
+"
}
-# end: func_to_host_pathlist
+
# func_emit_cwrapperexe_src
# emit the source code for a wrapper executable on stdout
@@ -3141,31 +4141,23 @@
This wrapper executable should never be moved out of the build directory.
If it is, it will not operate correctly.
-
- Currently, it simply execs the wrapper *script* "$SHELL $output",
- but could eventually absorb all of the scripts functionality and
- exec $objdir/$outputname directly.
*/
EOF
cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
#include
#include
#ifdef _MSC_VER
# include
# include
# include
-# define setmode _setmode
#else
# include
# include
# ifdef __CYGWIN__
# include
-# define HAVE_SETENV
-# ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-# endif
# endif
#endif
#include
@@ -3177,6 +4169,44 @@
#include
#include
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+# define _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
#if defined(PATH_MAX)
# define LT_PATHMAX PATH_MAX
#elif defined(MAXPATHLEN)
@@ -3192,14 +4222,7 @@
# define S_IXGRP 0
#endif
-#ifdef _MSC_VER
-# define S_IXUSR _S_IEXEC
-# define stat _stat
-# ifndef _INTPTR_T_DEFINED
-# define intptr_t int
-# endif
-#endif
-
+/* path handling portability macros */
#ifndef DIR_SEPARATOR
# define DIR_SEPARATOR '/'
# define PATH_SEPARATOR ':'
@@ -3230,10 +4253,6 @@
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
#endif /* PATH_SEPARATOR_2 */
-#ifdef __CYGWIN__
-# define FOPEN_WB "wb"
-#endif
-
#ifndef FOPEN_WB
# define FOPEN_WB "w"
#endif
@@ -3246,22 +4265,13 @@
if (stale) { free ((void *) stale); stale = 0; } \
} while (0)
-#undef LTWRAPPER_DEBUGPRINTF
-#if defined DEBUGWRAPPER
-# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
-static void
-ltwrapper_debugprintf (const char *fmt, ...)
-{
- va_list args;
- va_start (args, fmt);
- (void) vfprintf (stderr, fmt, args);
- va_end (args);
-}
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
#else
-# define LTWRAPPER_DEBUGPRINTF(args)
+static int lt_debug = 0;
#endif
-const char *program_name = NULL;
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
void *xmalloc (size_t num);
char *xstrdup (const char *string);
@@ -3271,41 +4281,27 @@
int make_executable (const char *path);
int check_executable (const char *path);
char *strendzap (char *str, const char *pat);
-void lt_fatal (const char *message, ...);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
void lt_setenv (const char *name, const char *value);
char *lt_extend_str (const char *orig_value, const char *add, int to_end);
-void lt_opt_process_env_set (const char *arg);
-void lt_opt_process_env_prepend (const char *arg);
-void lt_opt_process_env_append (const char *arg);
-int lt_split_name_value (const char *arg, char** name, char** value);
void lt_update_exe_path (const char *name, const char *value);
void lt_update_lib_path (const char *name, const char *value);
-
-static const char *script_text_part1 =
-EOF
-
- func_emit_wrapper_part1 yes |
- $SED -e 's/\([\\"]\)/\\\1/g' \
- -e 's/^/ "/' -e 's/$/\\n"/'
- echo ";"
- cat <")));
+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+ nonnull (lt_argv_zero));
for (i = 0; i < newargc; i++)
{
- LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "")));
+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+ i, nonnull (newargz[i]));
}
EOF
@@ -3560,11 +4517,14 @@
mingw*)
cat <<"EOF"
/* execv doesn't actually work on mingw as expected on unix */
+ newargz = prepare_spawn (newargz);
rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
if (rval == -1)
{
/* failed to start process */
- LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) failed to launch target \"%s\": %s\n",
+ lt_argv_zero, nonnull (strerror (errno)));
return 127;
}
return rval;
@@ -3586,7 +4546,7 @@
{
void *p = (void *) malloc (num);
if (!p)
- lt_fatal ("Memory exhausted");
+ lt_fatal (__FILE__, __LINE__, "memory exhausted");
return p;
}
@@ -3620,8 +4580,8 @@
{
struct stat st;
- LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n",
- path ? (*path ? path : "EMPTY!") : "NULL!"));
+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+ nonempty (path));
if ((!path) || (!*path))
return 0;
@@ -3638,8 +4598,8 @@
int rval = 0;
struct stat st;
- LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n",
- path ? (*path ? path : "EMPTY!") : "NULL!"));
+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+ nonempty (path));
if ((!path) || (!*path))
return 0;
@@ -3665,8 +4625,8 @@
int tmp_len;
char *concat_name;
- LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n",
- wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+ nonempty (wrapper));
if ((wrapper == NULL) || (*wrapper == '\0'))
return NULL;
@@ -3719,7 +4679,8 @@
{
/* empty path: current directory */
if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
tmp_len = strlen (tmp);
concat_name =
XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
@@ -3744,7 +4705,8 @@
}
/* Relative path | not found in path: prepend cwd */
if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal ("getcwd failed");
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
tmp_len = strlen (tmp);
concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
memcpy (concat_name, tmp, tmp_len);
@@ -3770,8 +4732,9 @@
int has_symlinks = 0;
while (strlen (tmp_pathspec) && !has_symlinks)
{
- LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
- tmp_pathspec));
+ lt_debugprintf (__FILE__, __LINE__,
+ "checking path component for symlinks: %s\n",
+ tmp_pathspec);
if (lstat (tmp_pathspec, &s) == 0)
{
if (S_ISLNK (s.st_mode) != 0)
@@ -3793,8 +4756,9 @@
}
else
{
- char *errstr = strerror (errno);
- lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+ lt_fatal (__FILE__, __LINE__,
+ "error accessing file \"%s\": %s",
+ tmp_pathspec, nonnull (strerror (errno)));
}
}
XFREE (tmp_pathspec);
@@ -3807,7 +4771,8 @@
tmp_pathspec = realpath (pathspec, buf);
if (tmp_pathspec == 0)
{
- lt_fatal ("Could not follow symlinks for %s", pathspec);
+ lt_fatal (__FILE__, __LINE__,
+ "could not follow symlinks for %s", pathspec);
}
return xstrdup (tmp_pathspec);
#endif
@@ -3833,11 +4798,25 @@
return str;
}
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+ va_list args;
+ if (lt_debug)
+ {
+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+ }
+}
+
static void
-lt_error_core (int exit_status, const char *mode,
+lt_error_core (int exit_status, const char *file,
+ int line, const char *mode,
const char *message, va_list ap)
{
- fprintf (stderr, "%s: %s: ", program_name, mode);
+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
vfprintf (stderr, message, ap);
fprintf (stderr, ".\n");
@@ -3846,20 +4825,32 @@
}
void
-lt_fatal (const char *message, ...)
+lt_fatal (const char *file, int line, const char *message, ...)
{
va_list ap;
va_start (ap, message);
- lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
va_end (ap);
}
+static const char *
+nonnull (const char *s)
+{
+ return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+ return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
void
lt_setenv (const char *name, const char *value)
{
- LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
- (name ? name : ""),
- (value ? value : "")));
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_setenv) setting '%s' to '%s'\n",
+ nonnull (name), nonnull (value));
{
#ifdef HAVE_SETENV
/* always make a copy, for consistency with !HAVE_SETENV */
@@ -3904,95 +4895,12 @@
return new_value;
}
-int
-lt_split_name_value (const char *arg, char** name, char** value)
-{
- const char *p;
- int len;
- if (!arg || !*arg)
- return 1;
-
- p = strchr (arg, (int)'=');
-
- if (!p)
- return 1;
-
- *value = xstrdup (++p);
-
- len = strlen (arg) - strlen (*value);
- *name = XMALLOC (char, len);
- strncpy (*name, arg, len-1);
- (*name)[len - 1] = '\0';
-
- return 0;
-}
-
-void
-lt_opt_process_env_set (const char *arg)
-{
- char *name = NULL;
- char *value = NULL;
-
- if (lt_split_name_value (arg, &name, &value) != 0)
- {
- XFREE (name);
- XFREE (value);
- lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
- }
-
- lt_setenv (name, value);
- XFREE (name);
- XFREE (value);
-}
-
-void
-lt_opt_process_env_prepend (const char *arg)
-{
- char *name = NULL;
- char *value = NULL;
- char *new_value = NULL;
-
- if (lt_split_name_value (arg, &name, &value) != 0)
- {
- XFREE (name);
- XFREE (value);
- lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
- }
-
- new_value = lt_extend_str (getenv (name), value, 0);
- lt_setenv (name, new_value);
- XFREE (new_value);
- XFREE (name);
- XFREE (value);
-}
-
-void
-lt_opt_process_env_append (const char *arg)
-{
- char *name = NULL;
- char *value = NULL;
- char *new_value = NULL;
-
- if (lt_split_name_value (arg, &name, &value) != 0)
- {
- XFREE (name);
- XFREE (value);
- lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
- }
-
- new_value = lt_extend_str (getenv (name), value, 1);
- lt_setenv (name, new_value);
- XFREE (new_value);
- XFREE (name);
- XFREE (value);
-}
-
void
lt_update_exe_path (const char *name, const char *value)
{
- LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
- (name ? name : ""),
- (value ? value : "")));
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
if (name && *name && value && *value)
{
@@ -4011,9 +4919,9 @@
void
lt_update_lib_path (const char *name, const char *value)
{
- LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
- (name ? name : ""),
- (value ? value : "")));
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
if (name && *name && value && *value)
{
@@ -4023,11 +4931,152 @@
}
}
+EOF
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+ Note that spawn() does not by itself call the command interpreter
+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+ GetVersionEx(&v);
+ v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+ }) ? "cmd.exe" : "command.com").
+ Instead it simply concatenates the arguments, separated by ' ', and calls
+ CreateProcess(). We must quote the arguments since Win32 CreateProcess()
+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+ special way:
+ - Space and tab are interpreted as delimiters. They are not treated as
+ delimiters if they are surrounded by double quotes: "...".
+ - Unescaped double quotes are removed from the input. Their only effect is
+ that within double quotes, space and tab are treated like normal
+ characters.
+ - Backslashes not followed by double quotes are not special.
+ - But 2*n+1 backslashes followed by a double quote become
+ n backslashes followed by a double quote (n >= 0):
+ \" -> "
+ \\\" -> \"
+ \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+ size_t argc;
+ char **new_argv;
+ size_t i;
+
+ /* Count number of arguments. */
+ for (argc = 0; argv[argc] != NULL; argc++)
+ ;
+
+ /* Allocate new argument vector. */
+ new_argv = XMALLOC (char *, argc + 1);
+
+ /* Put quoted arguments into the new argument vector. */
+ for (i = 0; i < argc; i++)
+ {
+ const char *string = argv[i];
+
+ if (string[0] == '\0')
+ new_argv[i] = xstrdup ("\"\"");
+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+ {
+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+ size_t length;
+ unsigned int backslashes;
+ const char *s;
+ char *quoted_string;
+ char *p;
+
+ length = 0;
+ backslashes = 0;
+ if (quote_around)
+ length++;
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ length += backslashes + 1;
+ length++;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ length += backslashes + 1;
+
+ quoted_string = XMALLOC (char, length + 1);
+
+ p = quoted_string;
+ backslashes = 0;
+ if (quote_around)
+ *p++ = '"';
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ {
+ unsigned int j;
+ for (j = backslashes + 1; j > 0; j--)
+ *p++ = '\\';
+ }
+ *p++ = c;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ {
+ unsigned int j;
+ for (j = backslashes; j > 0; j--)
+ *p++ = '\\';
+ *p++ = '"';
+ }
+ *p = '\0';
+
+ new_argv[i] = quoted_string;
+ }
+ else
+ new_argv[i] = (char *) string;
+ }
+ new_argv[argc] = NULL;
+
+ return new_argv;
+}
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+ func_emit_wrapper yes |
+ $SED -e 's/\([\\"]\)/\\\1/g' \
+ -e 's/^/ fputs ("/' -e 's/$/\\n", f);/'
+ cat <<"EOF"
+}
EOF
}
# end: func_emit_cwrapperexe_src
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+ $opt_debug
+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+ *import*) : ;;
+ *) false ;;
+ esac
+}
+
# func_mode_link arg...
func_mode_link ()
{
@@ -4072,6 +5121,7 @@
new_inherited_linker_flags=
avoid_version=no
+ bindir=
dlfiles=
dlprefiles=
dlself=no
@@ -4164,6 +5214,11 @@
esac
case $prev in
+ bindir)
+ bindir="$arg"
+ prev=
+ continue
+ ;;
dlfiles|dlprefiles)
if test "$preload" = no; then
# Add the symbol object into the linking commands.
@@ -4195,9 +5250,9 @@
;;
*)
if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
+ func_append dlfiles " $arg"
else
- dlprefiles="$dlprefiles $arg"
+ func_append dlprefiles " $arg"
fi
prev=
continue
@@ -4221,7 +5276,7 @@
*-*-darwin*)
case "$deplibs " in
*" $qarg.ltframework "*) ;;
- *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+ *) func_append deplibs " $qarg.ltframework" # this is fixed later
;;
esac
;;
@@ -4240,7 +5295,7 @@
moreargs=
for fil in `cat "$save_arg"`
do
-# moreargs="$moreargs $fil"
+# func_append moreargs " $fil"
arg=$fil
# A libtool-controlled object.
@@ -4269,7 +5324,7 @@
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
+ func_append dlfiles " $pic_object"
prev=
continue
else
@@ -4281,7 +5336,7 @@
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
+ func_append dlprefiles " $pic_object"
prev=
fi
@@ -4351,12 +5406,12 @@
if test "$prev" = rpath; then
case "$rpath " in
*" $arg "*) ;;
- *) rpath="$rpath $arg" ;;
+ *) func_append rpath " $arg" ;;
esac
else
case "$xrpath " in
*" $arg "*) ;;
- *) xrpath="$xrpath $arg" ;;
+ *) func_append xrpath " $arg" ;;
esac
fi
prev=
@@ -4368,28 +5423,28 @@
continue
;;
weak)
- weak_libs="$weak_libs $arg"
+ func_append weak_libs " $arg"
prev=
continue
;;
xcclinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $qarg"
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $qarg"
prev=
func_append compile_command " $qarg"
func_append finalize_command " $qarg"
continue
;;
xcompiler)
- compiler_flags="$compiler_flags $qarg"
+ func_append compiler_flags " $qarg"
prev=
func_append compile_command " $qarg"
func_append finalize_command " $qarg"
continue
;;
xlinker)
- linker_flags="$linker_flags $qarg"
- compiler_flags="$compiler_flags $wl$qarg"
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $wl$qarg"
prev=
func_append compile_command " $wl$qarg"
func_append finalize_command " $wl$qarg"
@@ -4425,6 +5480,11 @@
continue
;;
+ -bindir)
+ prev=bindir
+ continue
+ ;;
+
-dlopen)
prev=dlfiles
continue
@@ -4475,15 +5535,16 @@
;;
-L*)
- func_stripname '-L' '' "$arg"
- dir=$func_stripname_result
- if test -z "$dir"; then
+ func_stripname "-L" '' "$arg"
+ if test -z "$func_stripname_result"; then
if test "$#" -gt 0; then
func_fatal_error "require no space between \`-L' and \`$1'"
else
func_fatal_error "need path for \`-L' option"
fi
fi
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -4495,24 +5556,30 @@
;;
esac
case "$deplibs " in
- *" -L$dir "*) ;;
+ *" -L$dir "* | *" $arg "*)
+ # Will only happen for absolute or sysroot arguments
+ ;;
*)
- deplibs="$deplibs -L$dir"
- lib_search_path="$lib_search_path $dir"
+ # Preserve sysroot, but never include relative directories
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+ *) func_append deplibs " -L$dir" ;;
+ esac
+ func_append lib_search_path " $dir"
;;
esac
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$dir:"*) ;;
::) dllsearchpath=$dir;;
- *) dllsearchpath="$dllsearchpath:$dir";;
+ *) func_append dllsearchpath ":$dir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
::) dllsearchpath=$testbindir;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
+ *) func_append dllsearchpath ":$testbindir";;
esac
;;
esac
@@ -4522,7 +5589,7 @@
-l*)
if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
# These systems don't actually have a C or math library (as such)
continue
;;
@@ -4536,7 +5603,7 @@
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
- deplibs="$deplibs System.ltframework"
+ func_append deplibs " System.ltframework"
continue
;;
*-*-sco3.2v5* | *-*-sco5v6*)
@@ -4556,7 +5623,7 @@
;;
esac
fi
- deplibs="$deplibs $arg"
+ func_append deplibs " $arg"
continue
;;
@@ -4568,8 +5635,8 @@
# Tru64 UNIX uses -model [arg] to determine the layout of C++
# classes, name mangling, and exception handling.
# Darwin uses the -arch flag to determine output architecture.
- -model|-arch|-isysroot)
- compiler_flags="$compiler_flags $arg"
+ -model|-arch|-isysroot|--sysroot)
+ func_append compiler_flags " $arg"
func_append compile_command " $arg"
func_append finalize_command " $arg"
prev=xcompiler
@@ -4577,12 +5644,12 @@
;;
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
- compiler_flags="$compiler_flags $arg"
+ func_append compiler_flags " $arg"
func_append compile_command " $arg"
func_append finalize_command " $arg"
case "$new_inherited_linker_flags " in
*" $arg "*) ;;
- * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
esac
continue
;;
@@ -4649,13 +5716,17 @@
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
+ =*)
+ func_stripname '=' '' "$dir"
+ dir=$lt_sysroot$func_stripname_result
+ ;;
*)
func_fatal_error "only absolute run-paths are allowed"
;;
esac
case "$xrpath " in
*" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
+ *) func_append xrpath " $dir" ;;
esac
continue
;;
@@ -4708,8 +5779,8 @@
for flag in $args; do
IFS="$save_ifs"
func_quote_for_eval "$flag"
- arg="$arg $wl$func_quote_for_eval_result"
- compiler_flags="$compiler_flags $func_quote_for_eval_result"
+ func_append arg " $func_quote_for_eval_result"
+ func_append compiler_flags " $func_quote_for_eval_result"
done
IFS="$save_ifs"
func_stripname ' ' '' "$arg"
@@ -4724,9 +5795,9 @@
for flag in $args; do
IFS="$save_ifs"
func_quote_for_eval "$flag"
- arg="$arg $wl$func_quote_for_eval_result"
- compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
- linker_flags="$linker_flags $func_quote_for_eval_result"
+ func_append arg " $wl$func_quote_for_eval_result"
+ func_append compiler_flags " $wl$func_quote_for_eval_result"
+ func_append linker_flags " $func_quote_for_eval_result"
done
IFS="$save_ifs"
func_stripname ' ' '' "$arg"
@@ -4754,23 +5825,27 @@
arg="$func_quote_for_eval_result"
;;
- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
- # -r[0-9][0-9]* specifies the processor on the SGI compiler
- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
- # +DA*, +DD* enable 64-bit mode on the HP compiler
- # -q* pass through compiler args for the IBM compiler
- # -m*, -t[45]*, -txscale* pass through architecture-specific
- # compiler args for GCC
- # -F/path gives path to uninstalled frameworks, gcc on darwin
- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
- # @file GCC response files
+ # Flags to be passed through unchanged, with rationale:
+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
+ # -r[0-9][0-9]* specify processor for the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+ # +DA*, +DD* enable 64-bit mode for the HP compiler
+ # -q* compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+ # -F/path path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # @file GCC response files
+ # -tp=* Portland pgcc target processor selection
+ # --sysroot=* for sysroot support
+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+ -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
func_quote_for_eval "$arg"
arg="$func_quote_for_eval_result"
func_append compile_command " $arg"
func_append finalize_command " $arg"
- compiler_flags="$compiler_flags $arg"
+ func_append compiler_flags " $arg"
continue
;;
@@ -4782,7 +5857,7 @@
*.$objext)
# A standard object.
- objs="$objs $arg"
+ func_append objs " $arg"
;;
*.lo)
@@ -4813,7 +5888,7 @@
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- dlfiles="$dlfiles $pic_object"
+ func_append dlfiles " $pic_object"
prev=
continue
else
@@ -4825,7 +5900,7 @@
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
- dlprefiles="$dlprefiles $pic_object"
+ func_append dlprefiles " $pic_object"
prev=
fi
@@ -4870,24 +5945,25 @@
*.$libext)
# An archive.
- deplibs="$deplibs $arg"
- old_deplibs="$old_deplibs $arg"
+ func_append deplibs " $arg"
+ func_append old_deplibs " $arg"
continue
;;
*.la)
# A libtool-controlled library.
+ func_resolve_sysroot "$arg"
if test "$prev" = dlfiles; then
# This library was specified with -dlopen.
- dlfiles="$dlfiles $arg"
+ func_append dlfiles " $func_resolve_sysroot_result"
prev=
elif test "$prev" = dlprefiles; then
# The library was specified with -dlpreopen.
- dlprefiles="$dlprefiles $arg"
+ func_append dlprefiles " $func_resolve_sysroot_result"
prev=
else
- deplibs="$deplibs $arg"
+ func_append deplibs " $func_resolve_sysroot_result"
fi
continue
;;
@@ -4925,7 +6001,7 @@
if test -n "$shlibpath_var"; then
# get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
else
shlib_search_path=
fi
@@ -4934,6 +6010,8 @@
func_dirname "$output" "/" ""
output_objdir="$func_dirname_result$objdir"
+ func_to_tool_file "$output_objdir/"
+ tool_output_objdir=$func_to_tool_file_result
# Create the object directory.
func_mkdir_p "$output_objdir"
@@ -4954,12 +6032,12 @@
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
for deplib in $deplibs; do
- if $opt_duplicate_deps ; then
+ if $opt_preserve_dup_deps ; then
case "$libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
- libs="$libs $deplib"
+ func_append libs " $deplib"
done
if test "$linkmode" = lib; then
@@ -4972,9 +6050,9 @@
if $opt_duplicate_compiler_generated_deps; then
for pre_post_dep in $predeps $postdeps; do
case "$pre_post_deps " in
- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
esac
- pre_post_deps="$pre_post_deps $pre_post_dep"
+ func_append pre_post_deps " $pre_post_dep"
done
fi
pre_post_deps=
@@ -5041,17 +6119,19 @@
for lib in $dlprefiles; do
# Ignore non-libtool-libs
dependency_libs=
+ func_resolve_sysroot "$lib"
case $lib in
- *.la) func_source "$lib" ;;
+ *.la) func_source "$func_resolve_sysroot_result" ;;
esac
# Collect preopened libtool deplibs, except any this library
# has declared as weak libs
for deplib in $dependency_libs; do
- deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+ func_basename "$deplib"
+ deplib_base=$func_basename_result
case " $weak_libs " in
*" $deplib_base "*) ;;
- *) deplibs="$deplibs $deplib" ;;
+ *) func_append deplibs " $deplib" ;;
esac
done
done
@@ -5072,11 +6152,11 @@
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- compiler_flags="$compiler_flags $deplib"
+ func_append compiler_flags " $deplib"
if test "$linkmode" = lib ; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
esac
fi
fi
@@ -5161,7 +6241,7 @@
if test "$linkmode" = lib ; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
esac
fi
fi
@@ -5174,7 +6254,8 @@
test "$pass" = conv && continue
newdependency_libs="$deplib $newdependency_libs"
func_stripname '-L' '' "$deplib"
- newlib_search_path="$newlib_search_path $func_stripname_result"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
;;
prog)
if test "$pass" = conv; then
@@ -5188,7 +6269,8 @@
finalize_deplibs="$deplib $finalize_deplibs"
fi
func_stripname '-L' '' "$deplib"
- newlib_search_path="$newlib_search_path $func_stripname_result"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
;;
*)
func_warning "\`-L' is ignored for archives/objects"
@@ -5199,17 +6281,21 @@
-R*)
if test "$pass" = link; then
func_stripname '-R' '' "$deplib"
- dir=$func_stripname_result
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
# Make sure the xrpath contains only unique directories.
case "$xrpath " in
*" $dir "*) ;;
- *) xrpath="$xrpath $dir" ;;
+ *) func_append xrpath " $dir" ;;
esac
fi
deplibs="$deplib $deplibs"
continue
;;
- *.la) lib="$deplib" ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ lib=$func_resolve_sysroot_result
+ ;;
*.$libext)
if test "$pass" = conv; then
deplibs="$deplib $deplibs"
@@ -5227,7 +6313,7 @@
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
- if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
valid_a_lib=yes
fi
@@ -5237,15 +6323,15 @@
;;
esac
if test "$valid_a_lib" != yes; then
- $ECHO
+ echo
$ECHO "*** Warning: Trying to link with static lib archive $deplib."
- $ECHO "*** I have the capability to make that library automatically link in when"
- $ECHO "*** you link to this library. But I can only do this if you have a"
- $ECHO "*** shared version of the library, which you do not appear to have"
- $ECHO "*** because the file extensions .$libext of this argument makes me believe"
- $ECHO "*** that it is just a static archive that I should not use here."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because the file extensions .$libext of this argument makes me believe"
+ echo "*** that it is just a static archive that I should not use here."
else
- $ECHO
+ echo
$ECHO "*** Warning: Linking the shared library $output against the"
$ECHO "*** static library $deplib is not portable!"
deplibs="$deplib $deplibs"
@@ -5272,11 +6358,11 @@
if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
- newdlprefiles="$newdlprefiles $deplib"
+ func_append newdlprefiles " $deplib"
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- newdlfiles="$newdlfiles $deplib"
+ func_append newdlfiles " $deplib"
fi
fi
continue
@@ -5318,20 +6404,20 @@
# Convert "-framework foo" to "foo.ltframework"
if test -n "$inherited_linker_flags"; then
- tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
case " $new_inherited_linker_flags " in
*" $tmp_inherited_linker_flag "*) ;;
- *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
esac
done
fi
- dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan" ||
{ test "$linkmode" != prog && test "$linkmode" != lib; }; then
- test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+ test -n "$dlopen" && func_append dlfiles " $dlopen"
+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
fi
if test "$pass" = conv; then
@@ -5342,20 +6428,20 @@
func_fatal_error "cannot find name of link library for \`$lib'"
fi
# It is a libtool convenience library, so add in its objects.
- convenience="$convenience $ladir/$objdir/$old_library"
- old_convenience="$old_convenience $ladir/$objdir/$old_library"
+ func_append convenience " $ladir/$objdir/$old_library"
+ func_append old_convenience " $ladir/$objdir/$old_library"
elif test "$linkmode" != prog && test "$linkmode" != lib; then
func_fatal_error "\`$lib' is not a convenience library"
fi
tmp_libs=
for deplib in $dependency_libs; do
deplibs="$deplib $deplibs"
- if $opt_duplicate_deps ; then
+ if $opt_preserve_dup_deps ; then
case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
- tmp_libs="$tmp_libs $deplib"
+ func_append tmp_libs " $deplib"
done
continue
fi # $pass = conv
@@ -5363,9 +6449,15 @@
# Get the name of the library we link against.
linklib=
- for l in $old_library $library_names; do
- linklib="$l"
- done
+ if test -n "$old_library" &&
+ { test "$prefer_static_libs" = yes ||
+ test "$prefer_static_libs,$installed" = "built,no"; }; then
+ linklib=$old_library
+ else
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ fi
if test -z "$linklib"; then
func_fatal_error "cannot find name of link library for \`$lib'"
fi
@@ -5382,9 +6474,9 @@
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
# bomb out in the load deplibs phase.
- dlprefiles="$dlprefiles $lib $dependency_libs"
+ func_append dlprefiles " $lib $dependency_libs"
else
- newdlfiles="$newdlfiles $lib"
+ func_append newdlfiles " $lib"
fi
continue
fi # $pass = dlopen
@@ -5406,14 +6498,14 @@
# Find the relevant object directory and library name.
if test "X$installed" = Xyes; then
- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
func_warning "library \`$lib' was moved."
dir="$ladir"
absdir="$abs_ladir"
libdir="$abs_ladir"
else
- dir="$libdir"
- absdir="$libdir"
+ dir="$lt_sysroot$libdir"
+ absdir="$lt_sysroot$libdir"
fi
test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
@@ -5421,12 +6513,12 @@
dir="$ladir"
absdir="$abs_ladir"
# Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
+ func_append notinst_path " $abs_ladir"
else
dir="$ladir/$objdir"
absdir="$abs_ladir/$objdir"
# Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
+ func_append notinst_path " $abs_ladir"
fi
fi # $installed = yes
func_stripname 'lib' '.la' "$laname"
@@ -5437,20 +6529,46 @@
if test -z "$libdir" && test "$linkmode" = prog; then
func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
fi
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- newdlprefiles="$newdlprefiles $dir/$old_library"
- # Keep a list of preopened convenience libraries to check
- # that they are being used correctly in the link pass.
- test -z "$libdir" && \
- dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
- # Otherwise, use the dlname, so that lt_dlopen finds it.
- elif test -n "$dlname"; then
- newdlprefiles="$newdlprefiles $dir/$dlname"
- else
- newdlprefiles="$newdlprefiles $dir/$linklib"
- fi
+ case "$host" in
+ # special handling for platforms with PE-DLLs.
+ *cygwin* | *mingw* | *cegcc* )
+ # Linker will automatically link against shared library if both
+ # static and shared are present. Therefore, ensure we extract
+ # symbols from the import library if a shared library is present
+ # (otherwise, the dlopen module name will be incorrect). We do
+ # this by putting the import library name into $newdlprefiles.
+ # We recover the dlopen module name by 'saving' the la file
+ # name in a special purpose variable, and (later) extracting the
+ # dlname from the la file.
+ if test -n "$dlname"; then
+ func_tr_sh "$dir/$linklib"
+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+ func_append newdlprefiles " $dir/$linklib"
+ else
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ fi
+ ;;
+ * )
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ func_append newdlprefiles " $dir/$dlname"
+ else
+ func_append newdlprefiles " $dir/$linklib"
+ fi
+ ;;
+ esac
fi # $pass = dlpreopen
if test -z "$libdir"; then
@@ -5468,7 +6586,7 @@
if test "$linkmode" = prog && test "$pass" != link; then
- newlib_search_path="$newlib_search_path $ladir"
+ func_append newlib_search_path " $ladir"
deplibs="$lib $deplibs"
linkalldeplibs=no
@@ -5481,7 +6599,8 @@
for deplib in $dependency_libs; do
case $deplib in
-L*) func_stripname '-L' '' "$deplib"
- newlib_search_path="$newlib_search_path $func_stripname_result"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
;;
esac
# Need to link against all dependency_libs?
@@ -5492,12 +6611,12 @@
# or/and link against static libraries
newdependency_libs="$deplib $newdependency_libs"
fi
- if $opt_duplicate_deps ; then
+ if $opt_preserve_dup_deps ; then
case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
- tmp_libs="$tmp_libs $deplib"
+ func_append tmp_libs " $deplib"
done # for deplib
continue
fi # $linkmode = prog...
@@ -5512,7 +6631,7 @@
# Make sure the rpath contains only unique directories.
case "$temp_rpath:" in
*"$absdir:"*) ;;
- *) temp_rpath="$temp_rpath$absdir:" ;;
+ *) func_append temp_rpath "$absdir:" ;;
esac
fi
@@ -5524,7 +6643,7 @@
*)
case "$compile_rpath " in
*" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
+ *) func_append compile_rpath " $absdir" ;;
esac
;;
esac
@@ -5533,7 +6652,7 @@
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
+ *) func_append finalize_rpath " $libdir" ;;
esac
;;
esac
@@ -5558,12 +6677,12 @@
case $host in
*cygwin* | *mingw* | *cegcc*)
# No point in relinking DLLs because paths are not encoded
- notinst_deplibs="$notinst_deplibs $lib"
+ func_append notinst_deplibs " $lib"
need_relink=no
;;
*)
if test "$installed" = no; then
- notinst_deplibs="$notinst_deplibs $lib"
+ func_append notinst_deplibs " $lib"
need_relink=yes
fi
;;
@@ -5580,7 +6699,7 @@
fi
done
if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
- $ECHO
+ echo
if test "$linkmode" = prog; then
$ECHO "*** Warning: Linking the executable $output against the loadable module"
else
@@ -5598,7 +6717,7 @@
*)
case "$compile_rpath " in
*" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
+ *) func_append compile_rpath " $absdir" ;;
esac
;;
esac
@@ -5607,7 +6726,7 @@
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
+ *) func_append finalize_rpath " $libdir" ;;
esac
;;
esac
@@ -5661,7 +6780,7 @@
linklib=$newlib
fi # test -n "$old_archive_from_expsyms_cmds"
- if test "$linkmode" = prog || test "$mode" != relink; then
+ if test "$linkmode" = prog || test "$opt_mode" != relink; then
add_shlibpath=
add_dir=
add=
@@ -5683,9 +6802,9 @@
if test "X$dlopenmodule" != "X$lib"; then
$ECHO "*** Warning: lib $linklib is a module, not a shared library"
if test -z "$old_library" ; then
- $ECHO
- $ECHO "*** And there doesn't seem to be a static archive available"
- $ECHO "*** The link will probably fail, sorry"
+ echo
+ echo "*** And there doesn't seem to be a static archive available"
+ echo "*** The link will probably fail, sorry"
else
add="$dir/$old_library"
fi
@@ -5717,7 +6836,7 @@
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ func_append add_dir " -L$inst_prefix_dir$libdir"
;;
esac
fi
@@ -5739,7 +6858,7 @@
if test -n "$add_shlibpath"; then
case :$compile_shlibpath: in
*":$add_shlibpath:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
esac
fi
if test "$linkmode" = prog; then
@@ -5753,13 +6872,13 @@
test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
esac
fi
fi
fi
- if test "$linkmode" = prog || test "$mode" = relink; then
+ if test "$linkmode" = prog || test "$opt_mode" = relink; then
add_shlibpath=
add_dir=
add=
@@ -5773,7 +6892,7 @@
elif test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
esac
add="-l$name"
elif test "$hardcode_automatic" = yes; then
@@ -5790,7 +6909,7 @@
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
- add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ func_append add_dir " -L$inst_prefix_dir$libdir"
;;
esac
fi
@@ -5825,21 +6944,21 @@
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
- $ECHO
+ echo
$ECHO "*** Warning: This system can not link to static lib archive $lib."
- $ECHO "*** I have the capability to make that library automatically link in when"
- $ECHO "*** you link to this library. But I can only do this if you have a"
- $ECHO "*** shared version of the library, which you do not appear to have."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
if test "$module" = yes; then
- $ECHO "*** But as you try to build a module library, libtool will still create "
- $ECHO "*** a static module, that should work as long as the dlopening application"
- $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ echo "*** But as you try to build a module library, libtool will still create "
+ echo "*** a static module, that should work as long as the dlopening application"
+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
- $ECHO
- $ECHO "*** However, this would only work if libtool was able to extract symbol"
- $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $ECHO "*** not find such a program. So, this module is probably useless."
- $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
build_libtool_libs=module
@@ -5867,37 +6986,46 @@
temp_xrpath=$func_stripname_result
case " $xrpath " in
*" $temp_xrpath "*) ;;
- *) xrpath="$xrpath $temp_xrpath";;
+ *) func_append xrpath " $temp_xrpath";;
esac;;
- *) temp_deplibs="$temp_deplibs $libdir";;
+ *) func_append temp_deplibs " $libdir";;
esac
done
dependency_libs="$temp_deplibs"
fi
- newlib_search_path="$newlib_search_path $absdir"
+ func_append newlib_search_path " $absdir"
# Link against this library
test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
# ... and its dependency_libs
tmp_libs=
for deplib in $dependency_libs; do
newdependency_libs="$deplib $newdependency_libs"
- if $opt_duplicate_deps ; then
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result";;
+ *) func_resolve_sysroot "$deplib" ;;
+ esac
+ if $opt_preserve_dup_deps ; then
case "$tmp_libs " in
- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ *" $func_resolve_sysroot_result "*)
+ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
esac
fi
- tmp_libs="$tmp_libs $deplib"
+ func_append tmp_libs " $func_resolve_sysroot_result"
done
if test "$link_all_deplibs" != no; then
# Add the search paths of all dependency libraries
for deplib in $dependency_libs; do
+ path=
case $deplib in
-L*) path="$deplib" ;;
*.la)
+ func_resolve_sysroot "$deplib"
+ deplib=$func_resolve_sysroot_result
func_dirname "$deplib" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
@@ -5924,8 +7052,8 @@
if test -z "$darwin_install_name"; then
darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
fi
- compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
- linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
+ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
path=
fi
fi
@@ -5958,7 +7086,7 @@
compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
else
- compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
fi
fi
dependency_libs="$newdependency_libs"
@@ -5975,7 +7103,7 @@
for dir in $newlib_search_path; do
case "$lib_search_path " in
*" $dir "*) ;;
- *) lib_search_path="$lib_search_path $dir" ;;
+ *) func_append lib_search_path " $dir" ;;
esac
done
newlib_search_path=
@@ -6033,10 +7161,10 @@
-L*)
case " $tmp_libs " in
*" $deplib "*) ;;
- *) tmp_libs="$tmp_libs $deplib" ;;
+ *) func_append tmp_libs " $deplib" ;;
esac
;;
- *) tmp_libs="$tmp_libs $deplib" ;;
+ *) func_append tmp_libs " $deplib" ;;
esac
done
eval $var=\"$tmp_libs\"
@@ -6052,7 +7180,7 @@
;;
esac
if test -n "$i" ; then
- tmp_libs="$tmp_libs $i"
+ func_append tmp_libs " $i"
fi
done
dependency_libs=$tmp_libs
@@ -6093,7 +7221,7 @@
# Now set the variables for building old libraries.
build_libtool_libs=no
oldlibs="$output"
- objs="$objs$old_deplibs"
+ func_append objs "$old_deplibs"
;;
lib)
@@ -6126,10 +7254,10 @@
if test "$deplibs_check_method" != pass_all; then
func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
else
- $ECHO
+ echo
$ECHO "*** Warning: Linking the shared library $output against the non-libtool"
$ECHO "*** objects $objs is not portable!"
- libobjs="$libobjs $objs"
+ func_append libobjs " $objs"
fi
fi
@@ -6194,7 +7322,7 @@
age="$number_minor"
revision="$number_revision"
;;
- freebsd-aout|freebsd-elf|sunos)
+ freebsd-aout|freebsd-elf|qnx|sunos)
current="$number_major"
revision="$number_minor"
age="0"
@@ -6327,7 +7455,7 @@
done
# Make executables depend on our current version.
- verstring="$verstring:${current}.0"
+ func_append verstring ":${current}.0"
;;
qnx)
@@ -6395,10 +7523,10 @@
fi
func_generate_dlsyms "$libname" "$libname" "yes"
- libobjs="$libobjs $symfileobj"
+ func_append libobjs " $symfileobj"
test "X$libobjs" = "X " && libobjs=
- if test "$mode" != relink; then
+ if test "$opt_mode" != relink; then
# Remove our outputs, but don't remove object files since they
# may have been created when compiling PIC objects.
removelist=
@@ -6414,7 +7542,7 @@
continue
fi
fi
- removelist="$removelist $p"
+ func_append removelist " $p"
;;
*) ;;
esac
@@ -6425,27 +7553,28 @@
# Now set the variables for building old libraries.
if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
- oldlibs="$oldlibs $output_objdir/$libname.$libext"
+ func_append oldlibs " $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
- oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
fi
# Eliminate all temporary directories.
#for path in $notinst_path; do
- # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
- # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
- # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
#done
if test -n "$xrpath"; then
# If the user specified any rpath flags, then add them.
temp_xrpath=
for libdir in $xrpath; do
- temp_xrpath="$temp_xrpath -R$libdir"
+ func_replace_sysroot "$libdir"
+ func_append temp_xrpath " -R$func_replace_sysroot_result"
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
+ *) func_append finalize_rpath " $libdir" ;;
esac
done
if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
@@ -6459,7 +7588,7 @@
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
*" $lib "*) ;;
- *) dlfiles="$dlfiles $lib" ;;
+ *) func_append dlfiles " $lib" ;;
esac
done
@@ -6469,19 +7598,19 @@
for lib in $old_dlprefiles; do
case "$dlprefiles " in
*" $lib "*) ;;
- *) dlprefiles="$dlprefiles $lib" ;;
+ *) func_append dlprefiles " $lib" ;;
esac
done
if test "$build_libtool_libs" = yes; then
if test -n "$rpath"; then
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
# these systems don't actually have a c library (as such)!
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C library is in the System framework
- deplibs="$deplibs System.ltframework"
+ func_append deplibs " System.ltframework"
;;
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
@@ -6498,7 +7627,7 @@
*)
# Add libc to deplibs on all other systems if necessary.
if test "$build_libtool_need_lc" = "yes"; then
- deplibs="$deplibs -lc"
+ func_append deplibs " -lc"
fi
;;
esac
@@ -6547,7 +7676,7 @@
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
i=""
;;
esac
@@ -6558,21 +7687,21 @@
set dummy $deplib_matches; shift
deplib_match=$1
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
else
droppeddeps=yes
- $ECHO
+ echo
$ECHO "*** Warning: dynamic linker does not accept needed library $i."
- $ECHO "*** I have the capability to make that library automatically link in when"
- $ECHO "*** you link to this library. But I can only do this if you have a"
- $ECHO "*** shared version of the library, which I believe you do not have"
- $ECHO "*** because a test_compile did reveal that the linker did not use it for"
- $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which I believe you do not have"
+ echo "*** because a test_compile did reveal that the linker did not use it for"
+ echo "*** its dynamic dependency list that programs get resolved with at runtime."
fi
fi
;;
*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
;;
esac
done
@@ -6590,7 +7719,7 @@
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
i=""
;;
esac
@@ -6601,29 +7730,29 @@
set dummy $deplib_matches; shift
deplib_match=$1
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
else
droppeddeps=yes
- $ECHO
+ echo
$ECHO "*** Warning: dynamic linker does not accept needed library $i."
- $ECHO "*** I have the capability to make that library automatically link in when"
- $ECHO "*** you link to this library. But I can only do this if you have a"
- $ECHO "*** shared version of the library, which you do not appear to have"
- $ECHO "*** because a test_compile did reveal that the linker did not use this one"
- $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because a test_compile did reveal that the linker did not use this one"
+ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
fi
fi
else
droppeddeps=yes
- $ECHO
+ echo
$ECHO "*** Warning! Library $i is needed by this library but I was not able to"
- $ECHO "*** make it link in! You will probably need to install it or some"
- $ECHO "*** library that it depends on before this library will be fully"
- $ECHO "*** functional. Installing it before continuing would be even better."
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
fi
;;
*)
- newdeplibs="$newdeplibs $i"
+ func_append newdeplibs " $i"
;;
esac
done
@@ -6640,15 +7769,27 @@
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
;;
esac
fi
if test -n "$a_deplib" ; then
libname=`eval "\\$ECHO \"$libname_spec\""`
+ if test -n "$file_magic_glob"; then
+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+ else
+ libnameglob=$libname
+ fi
+ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ if test "$want_nocaseglob" = yes; then
+ shopt -s nocaseglob
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ $nocaseglob
+ else
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ fi
for potent_lib in $potential_libs; do
# Follow soft links.
if ls -lLd "$potent_lib" 2>/dev/null |
@@ -6665,13 +7806,13 @@
potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
case $potliblink in
[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
esac
done
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
$SED -e 10q |
$EGREP "$file_magic_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
break 2
fi
@@ -6680,12 +7821,12 @@
fi
if test -n "$a_deplib" ; then
droppeddeps=yes
- $ECHO
+ echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
- $ECHO "*** I have the capability to make that library automatically link in when"
- $ECHO "*** you link to this library. But I can only do this if you have a"
- $ECHO "*** shared version of the library, which you do not appear to have"
- $ECHO "*** because I did check the linker path looking for a file starting"
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
if test -z "$potlib" ; then
$ECHO "*** with $libname but no candidates were found. (...for file magic test)"
else
@@ -6696,7 +7837,7 @@
;;
*)
# Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
;;
esac
done # Gone through all deplibs.
@@ -6712,7 +7853,7 @@
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
;;
esac
@@ -6723,9 +7864,9 @@
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
potlib="$potent_lib" # see symlink-check above in file_magic test
- if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
$EGREP "$match_pattern_regex" > /dev/null; then
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
a_deplib=""
break 2
fi
@@ -6734,12 +7875,12 @@
fi
if test -n "$a_deplib" ; then
droppeddeps=yes
- $ECHO
+ echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
- $ECHO "*** I have the capability to make that library automatically link in when"
- $ECHO "*** you link to this library. But I can only do this if you have a"
- $ECHO "*** shared version of the library, which you do not appear to have"
- $ECHO "*** because I did check the linker path looking for a file starting"
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
if test -z "$potlib" ; then
$ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
else
@@ -6750,32 +7891,32 @@
;;
*)
# Add a -L argument.
- newdeplibs="$newdeplibs $a_deplib"
+ func_append newdeplibs " $a_deplib"
;;
esac
done # Gone through all deplibs.
;;
none | unknown | *)
newdeplibs=""
- tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
- -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
for i in $predeps $postdeps ; do
# can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
done
fi
- if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' |
- $GREP . >/dev/null; then
- $ECHO
+ case $tmp_deplibs in
+ *[!\ \ ]*)
+ echo
if test "X$deplibs_check_method" = "Xnone"; then
- $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
+ echo "*** Warning: inter-library dependencies are not supported in this platform."
else
- $ECHO "*** Warning: inter-library dependencies are not known to be supported."
+ echo "*** Warning: inter-library dependencies are not known to be supported."
fi
- $ECHO "*** All declared inter-library dependencies are being dropped."
+ echo "*** All declared inter-library dependencies are being dropped."
droppeddeps=yes
- fi
+ ;;
+ esac
;;
esac
versuffix=$versuffix_save
@@ -6787,23 +7928,23 @@
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library with the System framework
- newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
;;
esac
if test "$droppeddeps" = yes; then
if test "$module" = yes; then
- $ECHO
- $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
+ echo
+ echo "*** Warning: libtool could not satisfy all declared inter-library"
$ECHO "*** dependencies of module $libname. Therefore, libtool will create"
- $ECHO "*** a static module, that should work as long as the dlopening"
- $ECHO "*** application is linked with the -dlopen flag."
+ echo "*** a static module, that should work as long as the dlopening"
+ echo "*** application is linked with the -dlopen flag."
if test -z "$global_symbol_pipe"; then
- $ECHO
- $ECHO "*** However, this would only work if libtool was able to extract symbol"
- $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
- $ECHO "*** not find such a program. So, this module is probably useless."
- $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
@@ -6813,16 +7954,16 @@
build_libtool_libs=no
fi
else
- $ECHO "*** The inter-library dependencies that have been dropped here will be"
- $ECHO "*** automatically added whenever a program is linked with this library"
- $ECHO "*** or is declared to -dlopen it."
+ echo "*** The inter-library dependencies that have been dropped here will be"
+ echo "*** automatically added whenever a program is linked with this library"
+ echo "*** or is declared to -dlopen it."
if test "$allow_undefined" = no; then
- $ECHO
- $ECHO "*** Since this library must not contain undefined symbols,"
- $ECHO "*** because either the platform does not support them or"
- $ECHO "*** it was explicitly requested with -no-undefined,"
- $ECHO "*** libtool will only create a static version of it."
+ echo
+ echo "*** Since this library must not contain undefined symbols,"
+ echo "*** because either the platform does not support them or"
+ echo "*** it was explicitly requested with -no-undefined,"
+ echo "*** libtool will only create a static version of it."
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
build_libtool_libs=module
@@ -6839,9 +7980,9 @@
# Time to change all our "foo.ltframework" stuff back to "-framework foo"
case $host in
*-*-darwin*)
- newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
- new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
- deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
;;
esac
@@ -6854,7 +7995,7 @@
*)
case " $deplibs " in
*" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
+ func_append new_libs " -L$path/$objdir" ;;
esac
;;
esac
@@ -6864,10 +8005,10 @@
-L*)
case " $new_libs " in
*" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
done
deplibs="$new_libs"
@@ -6884,10 +8025,12 @@
hardcode_libdirs=
dep_rpath=
rpath="$finalize_rpath"
- test "$mode" != relink && rpath="$compile_rpath$rpath"
+ test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
for libdir in $rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
+ func_replace_sysroot "$libdir"
+ libdir=$func_replace_sysroot_result
if test -z "$hardcode_libdirs"; then
hardcode_libdirs="$libdir"
else
@@ -6896,18 +8039,18 @@
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- dep_rpath="$dep_rpath $flag"
+ func_append dep_rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
+ *) func_append perm_rpath " $libdir" ;;
esac
fi
done
@@ -6925,7 +8068,7 @@
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
- rpath="$rpath$dir:"
+ func_append rpath "$dir:"
done
eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
fi
@@ -6933,7 +8076,7 @@
fi
shlibpath="$finalize_shlibpath"
- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
if test -n "$shlibpath"; then
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
fi
@@ -6959,18 +8102,18 @@
linknames=
for link
do
- linknames="$linknames $link"
+ func_append linknames " $link"
done
# Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
test "X$libobjs" = "X " && libobjs=
delfiles=
if test -n "$export_symbols" && test -n "$include_expsyms"; then
$opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
export_symbols="$output_objdir/$libname.uexp"
- delfiles="$delfiles $export_symbols"
+ func_append delfiles " $export_symbols"
fi
orig_export_symbols=
@@ -7001,13 +8144,45 @@
$opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
+ for cmd1 in $cmds; do
IFS="$save_ifs"
- eval cmd=\"$cmd\"
- func_len " $cmd"
- len=$func_len_result
- if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ # Take the normal branch if the nm_file_list_spec branch
+ # doesn't work or if tool conversion is not needed.
+ case $nm_file_list_spec~$to_tool_file_cmd in
+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+ try_normal_branch=yes
+ eval cmd=\"$cmd1\"
+ func_len " $cmd"
+ len=$func_len_result
+ ;;
+ *)
+ try_normal_branch=no
+ ;;
+ esac
+ if test "$try_normal_branch" = yes \
+ && { test "$len" -lt "$max_cmd_len" \
+ || test "$max_cmd_len" -le -1; }
+ then
+ func_show_eval "$cmd" 'exit $?'
+ skipped_export=false
+ elif test -n "$nm_file_list_spec"; then
+ func_basename "$output"
+ output_la=$func_basename_result
+ save_libobjs=$libobjs
+ save_output=$output
+ output=${output_objdir}/${output_la}.nm
+ func_to_tool_file "$output"
+ libobjs=$nm_file_list_spec$func_to_tool_file_result
+ func_append delfiles " $output"
+ func_verbose "creating $NM input file list: $output"
+ for obj in $save_libobjs; do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > "$output"
+ eval cmd=\"$cmd1\"
func_show_eval "$cmd" 'exit $?'
+ output=$save_output
+ libobjs=$save_libobjs
skipped_export=false
else
# The command line is too long to execute in one step.
@@ -7029,7 +8204,7 @@
if test -n "$export_symbols" && test -n "$include_expsyms"; then
tmp_export_symbols="$export_symbols"
test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
- $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
@@ -7041,7 +8216,7 @@
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
@@ -7051,7 +8226,7 @@
case " $convenience " in
*" $test_deplib "*) ;;
*)
- tmp_deplibs="$tmp_deplibs $test_deplib"
+ func_append tmp_deplibs " $test_deplib"
;;
esac
done
@@ -7071,21 +8246,21 @@
test "X$libobjs" = "X " && libobjs=
else
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $convenience
- libobjs="$libobjs $func_extract_archives_result"
+ func_append libobjs " $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
fi
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
- linker_flags="$linker_flags $flag"
+ func_append linker_flags " $flag"
fi
# Make a backup of the uninstalled library when relinking
- if test "$mode" = relink; then
+ if test "$opt_mode" = relink; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
fi
@@ -7130,7 +8305,8 @@
save_libobjs=$libobjs
fi
save_output=$output
- output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
+ func_basename "$output"
+ output_la=$func_basename_result
# Clear the reloadable object creation command queue and
# initialize k to one.
@@ -7143,13 +8319,16 @@
if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
output=${output_objdir}/${output_la}.lnkscript
func_verbose "creating GNU ld script: $output"
- $ECHO 'INPUT (' > $output
+ echo 'INPUT (' > $output
for obj in $save_libobjs
do
- $ECHO "$obj" >> $output
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
done
- $ECHO ')' >> $output
- delfiles="$delfiles $output"
+ echo ')' >> $output
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$func_to_tool_file_result
elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
output=${output_objdir}/${output_la}.lnk
func_verbose "creating linker input file list: $output"
@@ -7163,10 +8342,12 @@
fi
for obj
do
- $ECHO "$obj" >> $output
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
done
- delfiles="$delfiles $output"
- output=$firstobj\"$file_list_spec$output\"
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
else
if test -n "$save_libobjs"; then
func_verbose "creating reloadable object files..."
@@ -7190,17 +8371,19 @@
# command to the queue.
if test "$k" -eq 1 ; then
# The first file doesn't have a previous command to add.
- eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+ reload_objs=$objlist
+ eval concat_cmds=\"$reload_cmds\"
else
# All subsequent reloadable object files will link in
# the last one created.
- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
fi
last_robj=$output_objdir/$output_la-${k}.$objext
func_arith $k + 1
k=$func_arith_result
output=$output_objdir/$output_la-${k}.$objext
- objlist=$obj
+ objlist=" $obj"
func_len " $last_robj"
func_arith $len0 + $func_len_result
len=$func_arith_result
@@ -7210,11 +8393,12 @@
# reloadable object file. All subsequent reloadable object
# files will link in the last one created.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
if test -n "$last_robj"; then
eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
fi
- delfiles="$delfiles $output"
+ func_append delfiles " $output"
else
output=
@@ -7248,7 +8432,7 @@
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$mode" = relink; then
+ if test "$opt_mode" = relink; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
@@ -7269,7 +8453,7 @@
if test -n "$export_symbols" && test -n "$include_expsyms"; then
tmp_export_symbols="$export_symbols"
test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
- $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
if test -n "$orig_export_symbols"; then
@@ -7281,7 +8465,7 @@
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
@@ -7322,10 +8506,10 @@
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
- libobjs="$libobjs $func_extract_archives_result"
+ func_append libobjs " $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
@@ -7341,7 +8525,7 @@
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$mode" = relink; then
+ if test "$opt_mode" = relink; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
@@ -7353,7 +8537,7 @@
IFS="$save_ifs"
# Restore the uninstalled library and exit
- if test "$mode" = relink; then
+ if test "$opt_mode" = relink; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
if test -n "$convenience"; then
@@ -7434,18 +8618,21 @@
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
else
gentop="$output_objdir/${obj}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $convenience
reload_conv_objs="$reload_objs $func_extract_archives_result"
fi
fi
+ # If we're not building shared, we need to use non_pic_objs
+ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
# Create the old-style object.
- reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
output="$obj"
func_execute_cmds "$reload_cmds" 'exit $?'
@@ -7505,8 +8692,8 @@
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library is the System framework
- compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
- finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
;;
esac
@@ -7517,14 +8704,14 @@
if test "$tagname" = CXX ; then
case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
10.[0123])
- compile_command="$compile_command ${wl}-bind_at_load"
- finalize_command="$finalize_command ${wl}-bind_at_load"
+ func_append compile_command " ${wl}-bind_at_load"
+ func_append finalize_command " ${wl}-bind_at_load"
;;
esac
fi
# Time to change all our "foo.ltframework" stuff back to "-framework foo"
- compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
- finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
;;
esac
@@ -7538,7 +8725,7 @@
*)
case " $compile_deplibs " in
*" -L$path/$objdir "*)
- new_libs="$new_libs -L$path/$objdir" ;;
+ func_append new_libs " -L$path/$objdir" ;;
esac
;;
esac
@@ -7548,17 +8735,17 @@
-L*)
case " $new_libs " in
*" $deplib "*) ;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
;;
- *) new_libs="$new_libs $deplib" ;;
+ *) func_append new_libs " $deplib" ;;
esac
done
compile_deplibs="$new_libs"
- compile_command="$compile_command $compile_deplibs"
- finalize_command="$finalize_command $finalize_deplibs"
+ func_append compile_command " $compile_deplibs"
+ func_append finalize_command " $finalize_deplibs"
if test -n "$rpath$xrpath"; then
# If the user specified any rpath flags, then add them.
@@ -7566,7 +8753,7 @@
# This is the magic to use -rpath.
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir" ;;
+ *) func_append finalize_rpath " $libdir" ;;
esac
done
fi
@@ -7585,18 +8772,18 @@
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
+ func_append rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
+ *) func_append perm_rpath " $libdir" ;;
esac
fi
case $host in
@@ -7605,12 +8792,12 @@
case :$dllsearchpath: in
*":$libdir:"*) ;;
::) dllsearchpath=$libdir;;
- *) dllsearchpath="$dllsearchpath:$libdir";;
+ *) func_append dllsearchpath ":$libdir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
::) dllsearchpath=$testbindir;;
- *) dllsearchpath="$dllsearchpath:$testbindir";;
+ *) func_append dllsearchpath ":$testbindir";;
esac
;;
esac
@@ -7636,18 +8823,18 @@
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- rpath="$rpath $flag"
+ func_append rpath " $flag"
fi
elif test -n "$runpath_var"; then
case "$finalize_perm_rpath " in
*" $libdir "*) ;;
- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+ *) func_append finalize_perm_rpath " $libdir" ;;
esac
fi
done
@@ -7661,8 +8848,8 @@
if test -n "$libobjs" && test "$build_old_libs" = yes; then
# Transform all the library objects into standard objects.
- compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
- finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
fi
func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
@@ -7674,15 +8861,15 @@
wrappers_required=yes
case $host in
+ *cegcc* | *mingw32ce*)
+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
*cygwin* | *mingw* )
if test "$build_libtool_libs" != yes; then
wrappers_required=no
fi
;;
- *cegcc)
- # Disable wrappers for cegcc, we are cross compiling anyway.
- wrappers_required=no
- ;;
*)
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
wrappers_required=no
@@ -7691,13 +8878,19 @@
esac
if test "$wrappers_required" = no; then
# Replace the output file specification.
- compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
link_command="$compile_command$compile_rpath"
# We have no uninstalled library dependencies, so finalize right now.
exit_status=0
func_show_eval "$link_command" 'exit_status=$?'
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
# Delete the generated files.
if test -f "$output_objdir/${outputname}S.${objext}"; then
func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
@@ -7720,7 +8913,7 @@
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
- rpath="$rpath$dir:"
+ func_append rpath "$dir:"
done
compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
@@ -7728,7 +8921,7 @@
# We should set the runpath_var.
rpath=
for dir in $finalize_perm_rpath; do
- rpath="$rpath$dir:"
+ func_append rpath "$dir:"
done
finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
@@ -7738,11 +8931,18 @@
# We don't need to create a wrapper script.
link_command="$compile_var$compile_command$compile_rpath"
# Replace the output file specification.
- link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
# Delete the old output file.
$opt_dry_run || $RM $output
# Link the executable and exit
func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
exit $EXIT_SUCCESS
fi
@@ -7757,7 +8957,7 @@
if test "$fast_install" != no; then
link_command="$finalize_var$compile_command$finalize_rpath"
if test "$fast_install" = yes; then
- relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
else
# fast_install is set to needless
relink_command=
@@ -7769,13 +8969,19 @@
fi
# Replace the output file specification.
- link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
# Delete the old output files.
$opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
func_show_eval "$link_command" 'exit $?'
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output_objdir/$outputname"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
# Now create the wrapper script.
func_verbose "creating $output"
@@ -7793,18 +8999,7 @@
fi
done
relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
- fi
-
- # Quote $ECHO for shipping.
- if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
- case $progpath in
- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
- esac
- qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
- else
- qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
fi
# Only actually do things if not in dry run mode.
@@ -7884,7 +9079,7 @@
else
oldobjs="$old_deplibs $non_pic_objects"
if test "$preload" = yes && test -f "$symfileobj"; then
- oldobjs="$oldobjs $symfileobj"
+ func_append oldobjs " $symfileobj"
fi
fi
addlibs="$old_convenience"
@@ -7892,10 +9087,10 @@
if test -n "$addlibs"; then
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $addlibs
- oldobjs="$oldobjs $func_extract_archives_result"
+ func_append oldobjs " $func_extract_archives_result"
fi
# Do each command in the archive commands.
@@ -7906,10 +9101,10 @@
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
- oldobjs="$oldobjs $func_extract_archives_result"
+ func_append oldobjs " $func_extract_archives_result"
fi
# POSIX demands no paths to be encoded in archives. We have
@@ -7925,9 +9120,9 @@
done | sort | sort -uc >/dev/null 2>&1); then
:
else
- $ECHO "copying selected object files to avoid basename conflicts..."
+ echo "copying selected object files to avoid basename conflicts..."
gentop="$output_objdir/${outputname}x"
- generated="$generated $gentop"
+ func_append generated " $gentop"
func_mkdir_p "$gentop"
save_oldobjs=$oldobjs
oldobjs=
@@ -7951,9 +9146,9 @@
esac
done
func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
- oldobjs="$oldobjs $gentop/$newobj"
+ func_append oldobjs " $gentop/$newobj"
;;
- *) oldobjs="$oldobjs $obj" ;;
+ *) func_append oldobjs " $obj" ;;
esac
done
fi
@@ -7963,6 +9158,16 @@
len=$func_len_result
if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
cmds=$old_archive_cmds
+ elif test -n "$archiver_list_spec"; then
+ func_verbose "using command file archive linking..."
+ for obj in $oldobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > $output_objdir/$libname.libcmd
+ func_to_tool_file "$output_objdir/$libname.libcmd"
+ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+ cmds=$old_archive_cmds
else
# the command line is too long to link in one step, link in parts
func_verbose "using piecewise archive linking..."
@@ -8036,7 +9241,7 @@
done
# Quote the link command for shipping.
relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
if test "$hardcode_automatic" = yes ; then
relink_command=
fi
@@ -8059,9 +9264,19 @@
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
test -z "$libdir" && \
func_fatal_error "\`$deplib' is not a valid libtool archive"
- newdependency_libs="$newdependency_libs $libdir/$name"
+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ -L*)
+ func_stripname -L '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -L$func_replace_sysroot_result"
;;
- *) newdependency_libs="$newdependency_libs $deplib" ;;
+ -R*)
+ func_stripname -R '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -R$func_replace_sysroot_result"
+ ;;
+ *) func_append newdependency_libs " $deplib" ;;
esac
done
dependency_libs="$newdependency_libs"
@@ -8075,9 +9290,9 @@
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
func_fatal_error "\`$lib' is not a valid libtool archive"
- newdlfiles="$newdlfiles $libdir/$name"
+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
;;
- *) newdlfiles="$newdlfiles $lib" ;;
+ *) func_append newdlfiles " $lib" ;;
esac
done
dlfiles="$newdlfiles"
@@ -8094,7 +9309,7 @@
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
func_fatal_error "\`$lib' is not a valid libtool archive"
- newdlprefiles="$newdlprefiles $libdir/$name"
+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
;;
esac
done
@@ -8106,7 +9321,7 @@
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
- newdlfiles="$newdlfiles $abs"
+ func_append newdlfiles " $abs"
done
dlfiles="$newdlfiles"
newdlprefiles=
@@ -8115,15 +9330,33 @@
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
- newdlprefiles="$newdlprefiles $abs"
+ func_append newdlprefiles " $abs"
done
dlprefiles="$newdlprefiles"
fi
$RM $output
# place dlname in correct position for cygwin
+ # In fact, it would be nice if we could use this code for all target
+ # systems that can't hard-code library paths into their executables
+ # and that have no shared library path variable independent of PATH,
+ # but it turns out we can't easily determine that from inspecting
+ # libtool variables, so we have to hard-code the OSs to which it
+ # applies here; at the moment, that means platforms that use the PE
+ # object format with DLL files. See the long comment at the top of
+ # tests/bindir.at for full details.
tdlname=$dlname
case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+ # If a -bindir argument was supplied, place the dll there.
+ if test "x$bindir" != x ;
+ then
+ func_relative_path "$install_libdir" "$bindir"
+ tdlname=$func_relative_path_result$dlname
+ else
+ # Otherwise fall back on heuristic.
+ tdlname=../bin/$dlname
+ fi
+ ;;
esac
$ECHO > $output "\
# $outputname - a libtool library file
@@ -8182,7 +9415,7 @@
exit $EXIT_SUCCESS
}
-{ test "$mode" = link || test "$mode" = relink; } &&
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
func_mode_link ${1+"$@"}
@@ -8202,9 +9435,9 @@
for arg
do
case $arg in
- -f) RM="$RM $arg"; rmforce=yes ;;
- -*) RM="$RM $arg" ;;
- *) files="$files $arg" ;;
+ -f) func_append RM " $arg"; rmforce=yes ;;
+ -*) func_append RM " $arg" ;;
+ *) func_append files " $arg" ;;
esac
done
@@ -8213,24 +9446,23 @@
rmdirs=
- origobjdir="$objdir"
for file in $files; do
func_dirname "$file" "" "."
dir="$func_dirname_result"
if test "X$dir" = X.; then
- objdir="$origobjdir"
+ odir="$objdir"
else
- objdir="$dir/$origobjdir"
+ odir="$dir/$objdir"
fi
func_basename "$file"
name="$func_basename_result"
- test "$mode" = uninstall && objdir="$dir"
+ test "$opt_mode" = uninstall && odir="$dir"
- # Remember objdir for removal later, being careful to avoid duplicates
- if test "$mode" = clean; then
+ # Remember odir for removal later, being careful to avoid duplicates
+ if test "$opt_mode" = clean; then
case " $rmdirs " in
- *" $objdir "*) ;;
- *) rmdirs="$rmdirs $objdir" ;;
+ *" $odir "*) ;;
+ *) func_append rmdirs " $odir" ;;
esac
fi
@@ -8256,18 +9488,17 @@
# Delete the libtool libraries and symlinks.
for n in $library_names; do
- rmfiles="$rmfiles $objdir/$n"
+ func_append rmfiles " $odir/$n"
done
- test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
- case "$mode" in
+ case "$opt_mode" in
clean)
- case " $library_names " in
- # " " in the beginning catches empty $dlname
+ case " $library_names " in
*" $dlname "*) ;;
- *) rmfiles="$rmfiles $objdir/$dlname" ;;
+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
esac
- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
;;
uninstall)
if test -n "$library_names"; then
@@ -8295,19 +9526,19 @@
# Add PIC object to the list of files to remove.
if test -n "$pic_object" &&
test "$pic_object" != none; then
- rmfiles="$rmfiles $dir/$pic_object"
+ func_append rmfiles " $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
if test -n "$non_pic_object" &&
test "$non_pic_object" != none; then
- rmfiles="$rmfiles $dir/$non_pic_object"
+ func_append rmfiles " $dir/$non_pic_object"
fi
fi
;;
*)
- if test "$mode" = clean ; then
+ if test "$opt_mode" = clean ; then
noexename=$name
case $file in
*.exe)
@@ -8317,7 +9548,7 @@
noexename=$func_stripname_result
# $file with .exe has already been added to rmfiles,
# add $file without .exe
- rmfiles="$rmfiles $file"
+ func_append rmfiles " $file"
;;
esac
# Do a test to see if this is a libtool program.
@@ -8326,7 +9557,7 @@
func_ltwrapper_scriptname "$file"
relink_command=
func_source $func_ltwrapper_scriptname_result
- rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+ func_append rmfiles " $func_ltwrapper_scriptname_result"
else
relink_command=
func_source $dir/$noexename
@@ -8334,12 +9565,12 @@
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
if test "$fast_install" = yes && test -n "$relink_command"; then
- rmfiles="$rmfiles $objdir/lt-$name"
+ func_append rmfiles " $odir/lt-$name"
fi
if test "X$noexename" != "X$name" ; then
- rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+ func_append rmfiles " $odir/lt-${noexename}.c"
fi
fi
fi
@@ -8347,7 +9578,6 @@
esac
func_show_eval "$RM $rmfiles" 'exit_status=1'
done
- objdir="$origobjdir"
# Try to remove the ${objdir}s in the directories where we deleted files
for dir in $rmdirs; do
@@ -8359,16 +9589,16 @@
exit $exit_status
}
-{ test "$mode" = uninstall || test "$mode" = clean; } &&
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
func_mode_uninstall ${1+"$@"}
-test -z "$mode" && {
+test -z "$opt_mode" && {
help="$generic_help"
func_fatal_help "you must specify a MODE"
}
test -z "$exec_cmd" && \
- func_fatal_help "invalid operation mode \`$mode'"
+ func_fatal_help "invalid operation mode \`$opt_mode'"
if test -n "$exec_cmd"; then
eval exec "$exec_cmd"
diff -Nru flatzebra-0.1.5/macros/ac_compile_warnings.m4 flatzebra-0.1.6/macros/ac_compile_warnings.m4
--- flatzebra-0.1.5/macros/ac_compile_warnings.m4 2009-02-14 06:14:58.000000000 +0000
+++ flatzebra-0.1.6/macros/ac_compile_warnings.m4 2012-07-14 03:16:53.000000000 +0000
@@ -15,7 +15,7 @@
then
if test "$GXX" = "yes"
then
- ac_compile_warnings_opt='-Wall'
+ ac_compile_warnings_opt='-W -Wall'
fi
CXXFLAGS="$CXXFLAGS $ac_compile_warnings_opt"
ac_compile_warnings_msg="$ac_compile_warnings_opt for C++"
@@ -25,7 +25,7 @@
then
if test "$GCC" = "yes"
then
- ac_compile_warnings_opt='-Wall'
+ ac_compile_warnings_opt='-W -Wall'
fi
CFLAGS="$CFLAGS $ac_compile_warnings_opt"
ac_compile_warnings_msg="$ac_compile_warnings_msg $ac_compile_warnings_opt for C"
diff -Nru flatzebra-0.1.5/macros/libtool.m4 flatzebra-0.1.6/macros/libtool.m4
--- flatzebra-0.1.5/macros/libtool.m4 2010-05-12 01:45:07.000000000 +0000
+++ flatzebra-0.1.6/macros/libtool.m4 2012-07-06 04:35:07.000000000 +0000
@@ -1,7 +1,8 @@
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
+# Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is free software; the Free Software Foundation gives
@@ -10,7 +11,8 @@
m4_define([_LT_COPYING], [dnl
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
+# Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is part of GNU Libtool.
@@ -37,7 +39,7 @@
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
])
-# serial 56 LT_INIT
+# serial 57 LT_INIT
# LT_PREREQ(VERSION)
@@ -66,6 +68,7 @@
# ------------------
AC_DEFUN([LT_INIT],
[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
AC_BEFORE([$0], [LTDL_INIT])dnl
@@ -82,6 +85,8 @@
AC_REQUIRE([LTOBSOLETE_VERSION])dnl
m4_require([_LT_PROG_LTMAIN])dnl
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
dnl Parse OPTIONS
_LT_SET_OPTIONS([$0], [$1])
@@ -118,7 +123,7 @@
*) break;;
esac
done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
])
@@ -138,6 +143,9 @@
m4_defun([_LT_SETUP],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
_LT_DECL([], [host_alias], [0], [The host system])dnl
_LT_DECL([], [host], [0])dnl
_LT_DECL([], [host_os], [0])dnl
@@ -160,10 +168,13 @@
dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
m4_require([_LT_CMD_RELOAD])dnl
m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
m4_require([_LT_CMD_OLD_ARCHIVE])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
_LT_CONFIG_LIBTOOL_INIT([
# See if we are running on zsh, and set the options which allow our
@@ -179,7 +190,6 @@
_LT_CHECK_OBJDIR
m4_require([_LT_TAG_COMPILER])dnl
-_LT_PROG_ECHO_BACKSLASH
case $host_os in
aix3*)
@@ -193,23 +203,6 @@
;;
esac
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
# Global variables:
ofile=libtool
can_build_shared=yes
@@ -250,6 +243,28 @@
])# _LT_SETUP
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
# _LT_PROG_LTMAIN
# ---------------
# Note that this code is called both from `configure', and `config.status'
@@ -408,7 +423,7 @@
# declaration there will have the same value as in `configure'. VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
# _LT_CONFIG_STATUS_DECLARATIONS
@@ -418,7 +433,7 @@
# embedded single quotes properly. In configure, this macro expands
# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
#
-# ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`'
+# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`'
m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
[m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
@@ -517,12 +532,20 @@
LTCFLAGS='$LTCFLAGS'
compiler='$compiler_DEFAULT'
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
# Quote evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_quote_varnames); do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -533,9 +556,9 @@
# Double-quote double-evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_dquote_varnames); do
- case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -543,16 +566,38 @@
esac
done
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\[$]0 --fallback-echo"')dnl "
- lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
- ;;
-esac
-
_LT_OUTPUT_LIBTOOL_INIT
])
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable. If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins. After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script. The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
# LT_OUTPUT
# ---------
@@ -562,20 +607,11 @@
AC_DEFUN([LT_OUTPUT],
[: ${CONFIG_LT=./config.lt}
AC_MSG_NOTICE([creating $CONFIG_LT])
-cat >"$CONFIG_LT" <<_LTEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate a libtool stub with the current configuration.
-
-lt_cl_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_LTEOF
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
cat >>"$CONFIG_LT" <<\_LTEOF
-AS_SHELL_SANITIZE
-_AS_PREPARE
-
-exec AS_MESSAGE_FD>&1
+lt_cl_silent=false
exec AS_MESSAGE_LOG_FD>>config.log
{
echo
@@ -601,7 +637,7 @@
m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
configured by $[0], generated by m4_PACKAGE_STRING.
-Copyright (C) 2008 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."
@@ -646,15 +682,13 @@
# appending to config.log, which fails on DOS, as config.log is still kept
# open by configure. Here we exec the FD to /dev/null, effectively closing
# config.log, so it can be properly (re)opened and appended to by config.lt.
-if test "$no_create" != yes; then
- lt_cl_success=:
- test "$silent" = yes &&
- lt_config_lt_args="$lt_config_lt_args --quiet"
- exec AS_MESSAGE_LOG_FD>/dev/null
- $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
- exec AS_MESSAGE_LOG_FD>>config.log
- $lt_cl_success || AS_EXIT(1)
-fi
+lt_cl_success=:
+test "$silent" = yes &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
])# LT_OUTPUT
@@ -717,15 +751,12 @@
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
- sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
- _LT_PROG_XSI_SHELLFNS
+ _LT_PROG_REPLACE_SHELLFNS
- sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" ||
+ mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
],
@@ -831,11 +862,13 @@
AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
dnl AC_DEFUN([AC_LIBTOOL_F77], [])
dnl AC_DEFUN([AC_LIBTOOL_FC], [])
dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
# _LT_TAG_COMPILER
@@ -940,6 +973,31 @@
[lt_cv_ld_exported_symbols_list=no])
LDFLAGS="$save_LDFLAGS"
])
+ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+ [lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+ ])
case $host_os in
rhapsody* | darwin1.[[012]])
_lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -967,7 +1025,7 @@
else
_lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
fi
- if test "$DSYMUTIL" != ":"; then
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
@@ -987,7 +1045,11 @@
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
case $cc_basename in
@@ -995,7 +1057,7 @@
*) _lt_dar_can_shared=$GCC ;;
esac
if test "$_lt_dar_can_shared" = "yes"; then
- output_verbose_link_cmd=echo
+ output_verbose_link_cmd=func_echo_all
_LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
_LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
_LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -1011,203 +1073,142 @@
fi
])
-# _LT_SYS_MODULE_PATH_AIX
-# -----------------------
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
# Links a minimal program and checks the executable
# for the system default hardcoded library path. In most cases,
# this is /usr/lib:/lib, but when the MPI compilers are used
# the location of the communication and MPI libs are included too.
# If we don't find anything, use the default library path according
# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
m4_defun([_LT_SYS_MODULE_PATH_AIX],
[m4_require([_LT_DECL_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+ lt_aix_libpath_sed='[
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }]'
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi],[])
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+ fi
+ ])
+ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
])# _LT_SYS_MODULE_PATH_AIX
# _LT_SHELL_INIT(ARG)
# -------------------
m4_define([_LT_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
- [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_SHELL_INIT
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
# _LT_PROG_ECHO_BACKSLASH
# -----------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[_LT_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$lt_ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
- ;;
-esac
-
-ECHO=${lt_ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X[$]1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
- # Yippee, $ECHO works!
- :
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
else
- # Restart under the correct shell.
- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<_LT_EOF
-[$]*
-_LT_EOF
- exit 0
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
fi
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
- if test "X${echo_test_string+set}" != Xset; then
- # find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
- { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
- then
- break
- fi
- done
- fi
-
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
- else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
-
- if test "X$ECHO" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- ECHO='print -r'
- elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
- else
- # Try using printf.
- ECHO='printf %s\n'
- if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
- if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
- if test "$prev" != 'sed 50q "[$]0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
- else
- # Oops. We lost completely, so just stick with echo.
- ECHO=echo
- fi
- fi
- fi
- fi
- fi
-fi
+case "$ECHO" in
+ printf*) AC_MSG_RESULT([printf]) ;;
+ print*) AC_MSG_RESULT([print -r]) ;;
+ *) AC_MSG_RESULT([cat]) ;;
+esac
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
- lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test "X`printf %s $ECHO`" = "X$ECHO" \
+ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
-AC_SUBST(lt_ECHO)
-])
_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1],
- [An echo program that does not interpret backslashes])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
])# _LT_PROG_ECHO_BACKSLASH
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[ --with-sysroot[=DIR] Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted. We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ AC_MSG_RESULT([${with_sysroot}])
+ AC_MSG_ERROR([The sysroot must be an absolute path.])
+ ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
+
# _LT_ENABLE_LOCK
# ---------------
m4_defun([_LT_ENABLE_LOCK],
@@ -1236,7 +1237,7 @@
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
if test "$lt_cv_prog_gnu_ld" = yes; then
case `/usr/bin/file conftest.$ac_objext` in
@@ -1354,14 +1355,47 @@
])# _LT_ENABLE_LOCK
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+ [lt_cv_ar_at_file=no
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+ ])
+ ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+ [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
# _LT_CMD_OLD_ARCHIVE
# -------------------
m4_defun([_LT_CMD_OLD_ARCHIVE],
-[AC_CHECK_TOOL(AR, ar, false)
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1])
+[_LT_PROG_AR
AC_CHECK_TOOL(STRIP, strip, :)
test -z "$STRIP" && STRIP=:
@@ -1388,10 +1422,19 @@
esac
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
_LT_DECL([], [old_postinstall_cmds], [2])
_LT_DECL([], [old_postuninstall_cmds], [2])
_LT_TAGDECL([], [old_archive_cmds], [2],
[Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+ [Whether to use a lock for old archive extraction])
])# _LT_CMD_OLD_ARCHIVE
@@ -1416,15 +1459,15 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
@@ -1464,7 +1507,7 @@
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&AS_MESSAGE_LOG_FD
- $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
@@ -1527,6 +1570,11 @@
lt_cv_sys_max_cmd_len=8192;
;;
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
@@ -1591,8 +1639,8 @@
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
- = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
@@ -1643,7 +1691,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-[#line __oline__ "configure"
+[#line $LINENO "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -1684,7 +1732,13 @@
# endif
#endif
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -1693,7 +1747,11 @@
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
/* dlclose (self); */
}
else
@@ -1869,16 +1927,16 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
@@ -2037,6 +2095,7 @@
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_OBJDUMP])dnl
m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
m4_if([$1],
[], [
@@ -2045,16 +2104,23 @@
darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
*) lt_awk_arg="/^libraries:/" ;;
esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
# Ok, now we have the path, separated by spaces, we can step through it
# and add multilib dir if necessary.
lt_tmp_lt_search_path_spec=
@@ -2067,7 +2133,7 @@
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
- lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
BEGIN {RS=" "; FS="/|\n";} {
lt_foo="";
lt_count=0;
@@ -2087,7 +2153,13 @@
if (lt_foo != "") { lt_freq[[lt_foo]]++; }
if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
}'`
- sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi])
@@ -2175,7 +2247,7 @@
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
@@ -2206,8 +2278,9 @@
need_version=no
need_lib_prefix=no
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
@@ -2228,36 +2301,83 @@
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
;;
esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
;;
*)
+ # Assume MSVC wrapper
library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
;;
esac
- dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
@@ -2344,6 +2464,19 @@
hardcode_into_libs=yes
;;
+haiku*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
@@ -2386,8 +2519,10 @@
soname_spec='${libname}${release}${shared_ext}$major'
;;
esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
;;
interix[[3-9]]*)
@@ -2445,7 +2580,7 @@
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
@@ -2454,16 +2589,21 @@
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
+
# Some binutils ld are patched to set DT_RUNPATH
- save_LDFLAGS=$LDFLAGS
- save_libdir=$libdir
- eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
- LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
- [shlibpath_overrides_runpath=yes])])
- LDFLAGS=$save_LDFLAGS
- libdir=$save_libdir
+ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+ [lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [lt_cv_shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+ ])
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
@@ -2475,8 +2615,9 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -2708,6 +2849,8 @@
The last name is the one that the linker finds with -lNAME]])
_LT_DECL([], [soname_spec], [1],
[[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+ [Permission mode override for installation of shared libraries])
_LT_DECL([], [postinstall_cmds], [2],
[Command to use after installation of a shared archive])
_LT_DECL([], [postuninstall_cmds], [2],
@@ -2820,6 +2963,7 @@
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
AC_ARG_WITH([gnu-ld],
[AS_HELP_STRING([--with-gnu-ld],
@@ -2941,6 +3085,11 @@
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
darwin*)
if test "$GCC" = yes; then
reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
@@ -2949,8 +3098,8 @@
fi
;;
esac
-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_DECL([], [reload_cmds], [2])dnl
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
])# _LT_CMD_RELOAD
@@ -3002,16 +3151,18 @@
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
-cegcc)
+cegcc*)
# use the weaker test based on 'objdump'. See mingw*.
lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -3041,6 +3192,10 @@
lt_cv_deplibs_check_method=pass_all
;;
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case $host_cpu in
@@ -3049,11 +3204,11 @@
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
;;
hppa*64*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
;;
*)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
esac
@@ -3075,7 +3230,7 @@
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
lt_cv_deplibs_check_method=pass_all
;;
@@ -3153,6 +3308,21 @@
;;
esac
])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -3160,7 +3330,11 @@
_LT_DECL([], [deplibs_check_method], [1],
[Method to check whether dependent libraries are shared objects])
_LT_DECL([], [file_magic_cmd], [1],
- [Command to use when deplibs_check_method == "file_magic"])
+ [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+ [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
])# _LT_CHECK_MAGIC_METHOD
@@ -3217,7 +3391,19 @@
NM="$lt_cv_path_NM"
else
# Didn't find any BSD compatible name lister, look for dumpbin.
- AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
AC_SUBST([DUMPBIN])
if test "$DUMPBIN" != ":"; then
NM="$DUMPBIN"
@@ -3230,13 +3416,13 @@
AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
[lt_cv_nm_interface="BSD nm"
echo "int some_variable = 0;" > conftest.$ac_ext
- (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
(eval "$ac_compile" 2>conftest.err)
cat conftest.err >&AS_MESSAGE_LOG_FD
- (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
(eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
cat conftest.err >&AS_MESSAGE_LOG_FD
- (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
cat conftest.out >&AS_MESSAGE_LOG_FD
if $GREP 'External.*some_variable' conftest.out > /dev/null; then
lt_cv_nm_interface="MS dumpbin"
@@ -3251,6 +3437,67 @@
dnl AC_DEFUN([AM_PROG_NM], [])
dnl AC_DEFUN([AC_PROG_NM], [])
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+ [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+ [lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
# LT_LIB_M
# --------
@@ -3259,7 +3506,7 @@
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
# These system don't have libm, or don't need it
;;
*-ncr-sysv4.3*)
@@ -3287,7 +3534,12 @@
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
if test "$GCC" = yes; then
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ case $cc_basename in
+ nvcc*)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+ esac
_LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
lt_cv_prog_compiler_rtti_exceptions,
@@ -3304,6 +3556,7 @@
m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([LT_PATH_NM])dnl
AC_REQUIRE([LT_PATH_LD])dnl
m4_require([_LT_DECL_SED])dnl
@@ -3371,8 +3624,8 @@
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
@@ -3408,6 +3661,7 @@
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
# Check to see that the pipe works correctly.
pipe_works=no
@@ -3429,7 +3683,7 @@
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
@@ -3441,6 +3695,18 @@
if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT@&t@_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -3452,7 +3718,7 @@
cat <<_LT_EOF >> conftest.$ac_ext
/* The mapping between symbol names and symbols. */
-const struct {
+LT@&t@_DLSYM_CONST struct {
const char *name;
void *address;
}
@@ -3478,15 +3744,15 @@
_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
LIBS="conftstm.$ac_objext"
CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
pipe_works=yes
fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
else
echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
fi
@@ -3519,6 +3785,13 @@
AC_MSG_RESULT(ok)
fi
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
[Take the output of nm and produce a listing of raw symbols and C names])
_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
@@ -3529,6 +3802,8 @@
_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
[lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
[Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+ [Specify filename containing input files for $NM])
]) # _LT_CMD_GLOBAL_SYMBOLS
@@ -3540,7 +3815,6 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)=
-AC_MSG_CHECKING([for $compiler option to produce PIC])
m4_if([$1], [CXX], [
# C++ specific cases for pic, static, wl, etc.
if test "$GXX" = yes; then
@@ -3591,6 +3865,11 @@
# DJGPP does not support shared libraries at all
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
interix[[3-9]]*)
# Interix 3.x gcc -fpic/-fPIC options generate broken code.
# Instead, we relocate shared libraries at runtime.
@@ -3640,6 +3919,12 @@
;;
esac
;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
dgux*)
case $cc_basename in
ec++*)
@@ -3696,7 +3981,7 @@
;;
esac
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
case $cc_basename in
KCC*)
# KAI C++ Compiler
@@ -3729,8 +4014,8 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- xlc* | xlC*)
- # IBM XL 8.0 on PPC
+ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
@@ -3792,7 +4077,7 @@
;;
solaris*)
case $cc_basename in
- CC*)
+ CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -3896,6 +4181,12 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+
hpux*)
# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
# PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
@@ -3938,6 +4229,13 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC'
+ ;;
+ esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
@@ -3980,7 +4278,7 @@
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
case $cc_basename in
# old Intel for x86_64 which still supported -KPIC.
ecc*)
@@ -4001,7 +4299,13 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
;;
- pgcc* | pgf77* | pgf90* | pgf95*)
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@@ -4013,25 +4317,25 @@
# All Alpha code is PIC.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- xl*)
- # IBM XL C 8.0/Fortran 10.1 on PPC
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
;;
*)
case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
+ *Sun\ F* | *Sun*Fortran*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ *Sun\ C*)
+ # Sun C 5.9
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
;;
esac
;;
@@ -4063,7 +4367,7 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
case $cc_basename in
- f77* | f90* | f95*)
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
@@ -4120,9 +4424,11 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
;;
esac
-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
- [How to pass a linker flag through the compiler])
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
#
# Check to make sure the PIC flag actually works.
@@ -4141,6 +4447,8 @@
_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
[Additional compiler flags for building library objects])
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
#
# Check to make sure the static flag actually works.
#
@@ -4161,6 +4469,7 @@
m4_defun([_LT_LINKER_SHLIBS],
[AC_REQUIRE([LT_PATH_LD])dnl
AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_DECL_SED])dnl
@@ -4169,27 +4478,35 @@
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
m4_if([$1], [CXX], [
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
case $host_os in
aix[[4-9]]*)
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global defined
+ # symbols, whereas GNU nm marks them as "W".
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
_LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
_LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
- ;;
+ ;;
cygwin* | mingw* | cegcc*)
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
+ case $cc_basename in
+ cl*) ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+ ;;
+ esac
+ ;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
+ ;;
esac
- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
], [
runpath_var=
_LT_TAGVAR(allow_undefined_flag, $1)=
@@ -4252,7 +4569,33 @@
esac
_LT_TAGVAR(ld_shlibs, $1)=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
@@ -4270,6 +4613,7 @@
fi
supports_anon_versioning=no
case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
@@ -4285,11 +4629,12 @@
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
_LT_EOF
fi
@@ -4325,10 +4670,12 @@
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -4346,6 +4693,11 @@
fi
;;
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -4361,7 +4713,7 @@
_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- gnu* | linux* | tpf* | k*bsd*-gnu)
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
if test "$host_os" = linux-dietlibc; then
case $cc_basename in
@@ -4371,15 +4723,16 @@
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
&& test "$tmp_diet" = no
then
- tmp_addflag=
+ tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@@ -4390,13 +4743,17 @@
lf95*) # Lahey Fortran 8.1
_LT_TAGVAR(whole_archive_flag_spec, $1)=
tmp_sharedflag='--shared' ;;
- xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ ;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
@@ -4412,17 +4769,17 @@
fi
case $cc_basename in
- xlf*)
+ xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
_LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
if test "x$supports_anon_versioning" = xyes; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
@@ -4436,8 +4793,8 @@
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
@@ -4455,8 +4812,8 @@
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4502,8 +4859,8 @@
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4543,8 +4900,10 @@
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
else
_LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
fi
@@ -4631,9 +4990,9 @@
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
- _LT_SYS_MODULE_PATH_AIX
+ _LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -4642,14 +5001,19 @@
else
# Determine the default libpath from the value encoded in an
# empty executable.
- _LT_SYS_MODULE_PATH_AIX
+ _LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
# This is similar to how AIX traditionally builds its shared libraries.
_LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
@@ -4681,20 +5045,63 @@
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
- # FIXME: Should let the user specify the lib program.
- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
- _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -4732,7 +5139,7 @@
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | dragonfly*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -4740,7 +5147,7 @@
hpux9*)
if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
@@ -4755,8 +5162,8 @@
;;
hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -4774,16 +5181,16 @@
;;
hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
@@ -4795,7 +5202,14 @@
_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ m4_if($1, [], [
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ _LT_LINKER_OPTION([if $CC understands -b],
+ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
;;
esac
fi
@@ -4823,19 +5237,34 @@
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
- AC_LINK_IFELSE(int foo(void) {},
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
- )
- LDFLAGS="$save_LDFLAGS"
+ # This should be the same for all languages, so no per-tag cache variable.
+ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+ [lt_cv_irix_exported_symbol],
+ [save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ AC_LINK_IFELSE(
+ [AC_LANG_SOURCE(
+ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+ [C++], [[int foo (void) { return 0; }]],
+ [Fortran 77], [[
+ subroutine foo
+ end]],
+ [Fortran], [[
+ subroutine foo
+ end]])])],
+ [lt_cv_irix_exported_symbol=yes],
+ [lt_cv_irix_exported_symbol=no])
+ LDFLAGS="$save_LDFLAGS"])
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -4897,17 +5326,17 @@
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
_LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -4917,13 +5346,13 @@
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -4936,9 +5365,9 @@
_LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
if test "$GCC" = yes; then
wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
@@ -5114,36 +5543,38 @@
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
- $RM conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
- _LT_TAGVAR(allow_undefined_flag, $1)=
- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
- then
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- else
- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- fi
- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $RM conftest*
- AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
+ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+ [$RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ ])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
;;
esac
fi
@@ -5208,8 +5639,6 @@
to runtime path list])
_LT_TAGDECL([], [link_all_deplibs], [0],
[Whether libtool must link a program against all its dependency libraries])
-_LT_TAGDECL([], [fix_srcfile_path], [1],
- [Fix the shell variable $srcfile for the compiler])
_LT_TAGDECL([], [always_export_symbols], [0],
[Set to "yes" if exported symbols are required])
_LT_TAGDECL([], [export_symbols_cmds], [2],
@@ -5220,6 +5649,8 @@
[Symbols that must always be exported])
_LT_TAGDECL([], [prelink_cmds], [2],
[Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+ [Commands necessary for finishing linking programs])
_LT_TAGDECL([], [file_list_spec], [1],
[Specify filename containing input files])
dnl FIXME: Not yet implemented
@@ -5313,37 +5744,22 @@
])# _LT_LANG_C_CONFIG
-# _LT_PROG_CXX
-# ------------
-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
-# compiler, we have our own version here.
-m4_defun([_LT_PROG_CXX],
-[
-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
-AC_PROG_CXX
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_PROG_CXXCPP
-else
- _lt_caught_CXX_error=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_CXX
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_CXX], [])
-
-
# _LT_LANG_CXX_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a C++ compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
# the compiler configuration to `libtool'.
m4_defun([_LT_LANG_CXX_CONFIG],
-[AC_REQUIRE([_LT_PROG_CXX])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
AC_LANG_PUSH(C++)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
@@ -5365,6 +5781,8 @@
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -5396,6 +5814,7 @@
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
lt_save_LD=$LD
lt_save_GCC=$GCC
GCC=$GXX
@@ -5413,6 +5832,7 @@
fi
test -z "${LDCXX+set}" || LD=$LDCXX
CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
@@ -5434,8 +5854,8 @@
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
if test "$with_gnu_ld" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5467,7 +5887,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
GXX=no
@@ -5576,10 +5996,10 @@
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an empty
# executable.
- _LT_SYS_MODULE_PATH_AIX
+ _LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -5588,14 +6008,19 @@
else
# Determine the default libpath from the value encoded in an
# empty executable.
- _LT_SYS_MODULE_PATH_AIX
+ _LT_SYS_MODULE_PATH_AIX([$1])
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
# This is similar to how AIX traditionally builds its shared
# libraries.
@@ -5625,28 +6050,75 @@
;;
cygwin* | mingw* | pw32* | cegcc*)
- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
darwin* | rhapsody*)
_LT_DARWIN_LINKER_FEATURES($1)
;;
@@ -5688,6 +6160,11 @@
gnu*)
;;
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
hpux9*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -5712,11 +6189,11 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test "$GXX" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
@@ -5777,7 +6254,7 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test "$GXX" = yes; then
@@ -5787,10 +6264,10 @@
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
@@ -5820,7 +6297,7 @@
case $cc_basename in
CC*)
# SGI C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
@@ -5831,9 +6308,9 @@
*)
if test "$GXX" = yes; then
if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
fi
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
@@ -5844,7 +6321,7 @@
_LT_TAGVAR(inherit_rpath, $1)=yes
;;
- linux* | k*bsd*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -5862,7 +6339,7 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5899,26 +6376,26 @@
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
- *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
_LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
- compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
_LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
$RANLIB $oldlib'
_LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
;;
- *) # Version 6 will use weak symbols
+ *) # Version 6 and above use weak symbols
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
;;
@@ -5926,7 +6403,7 @@
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
;;
cxx*)
# Compaq C++
@@ -5945,9 +6422,9 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
;;
- xl*)
+ xl* | mpixl* | bgxl*)
# IBM XL 8.0 on PPC, with GNU ld
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5967,13 +6444,13 @@
_LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
# Not sure whether something based on
# $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
# would be better.
- output_verbose_link_cmd='echo'
+ output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
@@ -6042,7 +6519,7 @@
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
_LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
fi
- output_verbose_link_cmd=echo
+ output_verbose_link_cmd=func_echo_all
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -6077,15 +6554,15 @@
case $host in
osf3*)
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
;;
*)
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
;;
@@ -6101,17 +6578,17 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
case $host in
osf3*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
;;
esac
@@ -6121,7 +6598,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
# FIXME: insert proper C++ library support
@@ -6157,7 +6634,7 @@
solaris*)
case $cc_basename in
- CC*)
+ CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
@@ -6178,7 +6655,7 @@
esac
_LT_TAGVAR(link_all_deplibs, $1)=yes
- output_verbose_link_cmd='echo'
+ output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
@@ -6198,14 +6675,14 @@
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
_LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
# g++ 2.7 appears to require `-G' NOT `-shared' on this
# platform.
@@ -6216,7 +6693,7 @@
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
@@ -6270,6 +6747,10 @@
CC*)
_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+ '"$_LT_TAGVAR(reload_cmds, $1)"
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
@@ -6325,6 +6806,7 @@
fi # test -n "$compiler"
CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
LDCXX=$LD
LD=$lt_save_LD
GCC=$lt_save_GCC
@@ -6339,6 +6821,29 @@
])# _LT_LANG_CXX_CONFIG
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
@@ -6347,6 +6852,7 @@
# objects, libraries and library flags.
m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
# Dependencies to place before and after the object being linked:
_LT_TAGVAR(predep_objects, $1)=
_LT_TAGVAR(postdep_objects, $1)=
@@ -6397,6 +6903,13 @@
};
_LT_EOF
])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+esac
+
dnl Parse the compiler output and extract the necessary
dnl objects, libraries and library flags.
if AC_TRY_EVAL(ac_compile); then
@@ -6408,7 +6921,7 @@
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
- case $p in
+ case ${prev}${p} in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
@@ -6417,13 +6930,22 @@
test $p = "-R"; then
prev=$p
continue
- else
- prev=
fi
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
+ case ${prev} in
+ -L | -R)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
@@ -6443,8 +6965,10 @@
_LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
fi
fi
+ prev=
;;
+ *.lto.$objext) ;; # Ignore GCC LTO objects
*.$objext)
# This assumes that the test object file only shows up
# once in the compiler output.
@@ -6480,6 +7004,7 @@
fi
$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
# PORTME: override above test on systems where it is broken
m4_if([$1], [CXX],
@@ -6516,7 +7041,7 @@
solaris*)
case $cc_basename in
- CC*)
+ CC* | sunCC*)
# The more standards-conforming stlport4 library is
# incompatible with the Cstd library. Avoid specifying
# it if it's in CXXFLAGS. Ignore libCrun as
@@ -6560,32 +7085,16 @@
])# _LT_SYS_HIDDEN_LIBDEPS
-# _LT_PROG_F77
-# ------------
-# Since AC_PROG_F77 is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_F77],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
-AC_PROG_F77
-if test -z "$F77" || test "X$F77" = "Xno"; then
- _lt_disable_F77=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_F77
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_F77], [])
-
-
# _LT_LANG_F77_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to `libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
-[AC_REQUIRE([_LT_PROG_F77])dnl
-AC_LANG_PUSH(Fortran 77)
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+ _lt_disable_F77=yes
+fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
@@ -6604,6 +7113,8 @@
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6643,7 +7154,9 @@
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
CC=${F77-"f77"}
+ CFLAGS=$FFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
@@ -6697,38 +7210,24 @@
GCC=$lt_save_GCC
CC="$lt_save_CC"
+ CFLAGS="$lt_save_CFLAGS"
fi # test "$_lt_disable_F77" != yes
AC_LANG_POP
])# _LT_LANG_F77_CONFIG
-# _LT_PROG_FC
-# -----------
-# Since AC_PROG_FC is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_FC],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
-AC_PROG_FC
-if test -z "$FC" || test "X$FC" = "Xno"; then
- _lt_disable_FC=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_FC
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_FC], [])
-
-
# _LT_LANG_FC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to `libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
-[AC_REQUIRE([_LT_PROG_FC])dnl
-AC_LANG_PUSH(Fortran)
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+ _lt_disable_FC=yes
+fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
@@ -6747,6 +7246,8 @@
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6786,7 +7287,9 @@
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
CC=${FC-"f95"}
+ CFLAGS=$FCFLAGS
compiler=$CC
GCC=$ac_cv_fc_compiler_gnu
@@ -6842,7 +7345,8 @@
fi # test -n "$compiler"
GCC=$lt_save_GCC
- CC="$lt_save_CC"
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
fi # test "$_lt_disable_FC" != yes
AC_LANG_POP
@@ -6879,10 +7383,12 @@
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=yes
CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_TAGVAR(LD, $1)="$LD"
@@ -6892,6 +7398,8 @@
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -6911,7 +7419,8 @@
AC_LANG_RESTORE
GCC=$lt_save_GCC
-CC="$lt_save_CC"
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GCJ_CONFIG
@@ -6946,9 +7455,11 @@
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=
CC=${RC-"windres"}
+CFLAGS=
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
@@ -6961,7 +7472,8 @@
GCC=$lt_save_GCC
AC_LANG_RESTORE
-CC="$lt_save_CC"
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_RC_CONFIG
@@ -7020,6 +7532,15 @@
AC_SUBST([OBJDUMP])
])
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
# _LT_DECL_SED
# ------------
@@ -7113,8 +7634,8 @@
# Try some XSI features
xsi_shell=no
( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,, \
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
&& eval 'test $(( 1 + 1 )) -eq 2 \
&& test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
&& xsi_shell=yes
@@ -7153,208 +7674,162 @@
])# _LT_CHECK_SHELL_FEATURES
-# _LT_PROG_XSI_SHELLFNS
-# ---------------------
-# Bourne and XSI compatible variants of some useful shell functions.
-m4_defun([_LT_PROG_XSI_SHELLFNS],
-[case $xsi_shell in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
-}
-
-# func_basename file
-func_basename ()
-{
- func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=${1%%=*}
- func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=$(( $[*] ))
-}
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+])
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=${#1}
-}
-_LT_EOF
- ;;
- *) # Bourne compatible functions.
- cat << \_LT_EOF >> "$cfgfile"
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac])
+
+ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+ func_basename_result="${1##*/}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"])
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-}
+ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}])
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
+ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+ func_split_long_opt_name=${1%%=*}
+ func_split_long_opt_arg=${1#*=}])
-dnl func_dirname_and_basename
-dnl A portable version of this function is already defined in general.m4sh
-dnl so there is no need for it here.
+ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "X${3}" \
- | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
- esac
-}
+ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac])
-# sed scripts:
-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[[^=]]*=//'
+ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
-# func_opt_split
-func_opt_split ()
-{
- func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
- func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
+ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
-# func_lo2o object
-func_lo2o ()
-{
- func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
+ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
+fi
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
-}
+if test x"$lt_shell_append" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=`expr "$[@]"`
-}
+ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+ func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
-_LT_EOF
-esac
+if test x"$_lt_function_replace_fail" = x":"; then
+ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
-case $lt_shell_append in
- yes)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "$[1]+=\$[2]"
-}
-_LT_EOF
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
;;
- *)
- cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "$[1]=\$$[1]\$[2]"
-}
-
-_LT_EOF
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
;;
- esac
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+ [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+ [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
diff -Nru flatzebra-0.1.5/macros/ltoptions.m4 flatzebra-0.1.6/macros/ltoptions.m4
--- flatzebra-0.1.5/macros/ltoptions.m4 2010-05-12 01:45:07.000000000 +0000
+++ flatzebra-0.1.6/macros/ltoptions.m4 2012-07-06 04:35:07.000000000 +0000
@@ -1,13 +1,14 @@
# Helper functions for option handling. -*- Autoconf -*-
#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 6 ltoptions.m4
+# serial 7 ltoptions.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
@@ -125,7 +126,7 @@
[enable_win32_dll=yes
case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
@@ -133,13 +134,13 @@
esac
test -z "$AS" && AS=as
-_LT_DECL([], [AS], [0], [Assembler program])dnl
+_LT_DECL([], [AS], [1], [Assembler program])dnl
test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
])# win32-dll
AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
diff -Nru flatzebra-0.1.5/macros/ltversion.m4 flatzebra-0.1.6/macros/ltversion.m4
--- flatzebra-0.1.5/macros/ltversion.m4 2010-05-12 01:45:08.000000000 +0000
+++ flatzebra-0.1.6/macros/ltversion.m4 2012-07-06 04:35:08.000000000 +0000
@@ -7,17 +7,17 @@
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# Generated from ltversion.in.
+# @configure_input@
-# serial 3017 ltversion.m4
+# serial 3293 ltversion.m4
# This file is part of GNU Libtool
-m4_define([LT_PACKAGE_VERSION], [2.2.6b])
-m4_define([LT_PACKAGE_REVISION], [1.3017])
+m4_define([LT_PACKAGE_VERSION], [2.4])
+m4_define([LT_PACKAGE_REVISION], [1.3293])
AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.2.6b'
-macro_revision='1.3017'
+[macro_version='2.4'
+macro_revision='1.3293'
_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
_LT_DECL(, macro_revision, 0)
])
diff -Nru flatzebra-0.1.5/macros/lt~obsolete.m4 flatzebra-0.1.6/macros/lt~obsolete.m4
--- flatzebra-0.1.5/macros/lt~obsolete.m4 2010-05-12 01:45:08.000000000 +0000
+++ flatzebra-0.1.6/macros/lt~obsolete.m4 2012-07-06 04:35:08.000000000 +0000
@@ -1,13 +1,13 @@
# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
# Written by Scott James Remnant, 2004.
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 4 lt~obsolete.m4
+# serial 5 lt~obsolete.m4
# These exist entirely to fool aclocal when bootstrapping libtool.
#
@@ -77,7 +77,6 @@
m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
-m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])])
m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
@@ -90,3 +89,10 @@
m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
diff -Nru flatzebra-0.1.5/src/Makefile.am flatzebra-0.1.6/src/Makefile.am
--- flatzebra-0.1.5/src/Makefile.am 2003-04-26 04:19:06.000000000 +0000
+++ flatzebra-0.1.6/src/Makefile.am 2012-07-06 04:36:47.000000000 +0000
@@ -1,4 +1,4 @@
-# $Id: Makefile.am,v 1.1 2003/04/26 04:19:06 sarrazip Exp $
+# $Id: Makefile.am,v 1.3 2012/07/06 04:36:47 sarrazip Exp $
SUBDIRS = flatzebra
diff -Nru flatzebra-0.1.5/src/Makefile.in flatzebra-0.1.6/src/Makefile.in
--- flatzebra-0.1.5/src/Makefile.in 2010-05-13 03:20:36.000000000 +0000
+++ flatzebra-0.1.6/src/Makefile.in 2012-07-14 03:41:48.000000000 +0000
@@ -15,7 +15,7 @@
@SET_MAKE@
-# $Id: Makefile.am,v 1.1 2003/04/26 04:19:06 sarrazip Exp $
+# $Id: Makefile.am,v 1.3 2012/07/06 04:36:47 sarrazip Exp $
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
@@ -115,6 +115,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
@@ -138,6 +139,7 @@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MINVER_SDL = @MINVER_SDL@
MINVER_SDL_IMAGE = @MINVER_SDL_IMAGE@
MINVER_SDL_MIXER = @MINVER_SDL_MIXER@
@@ -156,6 +158,7 @@
PACKAGE_SUMMARY_EN = @PACKAGE_SUMMARY_EN@
PACKAGE_SUMMARY_FR = @PACKAGE_SUMMARY_FR@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
@@ -172,6 +175,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -205,7 +209,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
diff -Nru flatzebra-0.1.5/src/flatzebra/Couple.h flatzebra-0.1.6/src/flatzebra/Couple.h
--- flatzebra-0.1.5/src/flatzebra/Couple.h 2010-04-25 01:15:57.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/Couple.h 2010-06-05 20:50:42.000000000 +0000
@@ -1,4 +1,4 @@
-/* $Id: Couple.h,v 1.2 2010/04/25 01:15:57 sarrazip Exp $
+/* $Id: Couple.h,v 1.3 2010/06/05 20:50:42 sarrazip Exp $
Couple.h - Class representing a couple of integers.
flatzebra - Generic 2D Game Engine library
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#ifndef _H_Couple
@@ -72,6 +72,10 @@
/* Returns true iff one or both components differ from zero.
*/
+ int squaredLength() const;
+ /* Returns the square of the length of the vector represented by the couple.
+ */
+
double length() const;
/* Returns the length of the vector represented by the couple.
*/
@@ -91,6 +95,10 @@
friend bool operator == (const Couple &c1, const Couple &c2);
friend bool operator != (const Couple &c1, const Couple &c2);
+ int dotProduct(const Couple &c) const;
+ /* Returns the scalar product of this couple with the given one.
+ */
+
};
@@ -228,9 +236,21 @@
}
+inline int Couple::squaredLength() const
+{
+ return x * x + y * y;
+}
+
+
inline double Couple::length() const
{
- return sqrt(double(x) * x + double(y) * y);
+ return hypot(x, y);
+}
+
+
+inline int Couple::dotProduct(const Couple &c) const
+{
+ return x * c.x + y * c.y;
}
diff -Nru flatzebra-0.1.5/src/flatzebra/GameEngine.cpp flatzebra-0.1.6/src/flatzebra/GameEngine.cpp
--- flatzebra-0.1.5/src/flatzebra/GameEngine.cpp 2010-05-10 04:23:31.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/GameEngine.cpp 2012-07-14 03:16:03.000000000 +0000
@@ -1,8 +1,8 @@
-/* $Id: GameEngine.cpp,v 1.13 2010/05/02 02:30:14 sarrazip Exp $
+/* $Id: GameEngine.cpp,v 1.15 2010/08/15 02:16:11 sarrazip Exp $
GameEngine.cpp - Abstract class representing an SDL Game Engine.
flatzebra - Generic 2D Game Engine library
- Copyright (C) 1999-2010 Pierre Sarrazin
+ Copyright (C) 1999-2012 Pierre Sarrazin
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#include
@@ -92,6 +92,7 @@
GameEngine::~GameEngine()
{
SDL_FreeSurface(fixedWidthFontPixmap);
+ SDL_FreeSurface(theSDLScreen);
SDL_Quit();
}
diff -Nru flatzebra-0.1.5/src/flatzebra/GameEngine.h flatzebra-0.1.6/src/flatzebra/GameEngine.h
--- flatzebra-0.1.5/src/flatzebra/GameEngine.h 2010-05-10 04:23:38.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/GameEngine.h 2012-07-14 03:15:57.000000000 +0000
@@ -1,8 +1,8 @@
-/* $Id: GameEngine.h,v 1.13 2010/05/10 04:23:38 sarrazip Exp $
+/* $Id: GameEngine.h,v 1.14 2010/06/05 20:50:42 sarrazip Exp $
GameEngine.h - Abstract class representing an SDL Game Engine.
flatzebra - Generic 2D Game Engine library
- Copyright (C) 1999-2010 Pierre Sarrazin
+ Copyright (C) 1999-2012 Pierre Sarrazin
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#ifndef _H_GameEngine
@@ -263,7 +263,7 @@
inline
-bool
+bool
GameEngine::inFullScreenMode() const
{
return usingFullScreen;
diff -Nru flatzebra-0.1.5/src/flatzebra/Joystick.cpp flatzebra-0.1.6/src/flatzebra/Joystick.cpp
--- flatzebra-0.1.5/src/flatzebra/Joystick.cpp 2010-05-02 02:57:30.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/Joystick.cpp 2012-07-14 03:16:18.000000000 +0000
@@ -1,8 +1,8 @@
-/* $Id: Joystick.cpp,v 1.2 2010/05/02 02:57:30 sarrazip Exp $
+/* $Id: Joystick.cpp,v 1.7 2012/07/06 04:28:45 sarrazip Exp $
Joystick.cpp - Joystick or game pad encapsulation.
flatzebra - Generic 2D Game Engine library
- Copyright (C) 1999-2010 Pierre Sarrazin
+ Copyright (C) 1999-2012 Pierre Sarrazin
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#include "Joystick.h"
@@ -30,9 +30,12 @@
Joystick::Joystick()
: joystick(NULL),
joystickButtons(),
- xAxis(0),
- yAxis(0)
+ xAxis(),
+ yAxis()
{
+ xAxis[0] = xAxis[1] = 0;
+ yAxis[0] = yAxis[1] = 0;
+
if (SDL_Init(SDL_INIT_JOYSTICK) == 0 && SDL_NumJoysticks() > 0)
{
joystick = SDL_JoystickOpen(0);
@@ -70,7 +73,7 @@
return false;
if (buttonNumber < 0 || buttonNumber >= static_cast(joystickButtons.size()))
return false;
- return SDL_JoystickGetButton(joystick, buttonNumber);
+ return SDL_JoystickGetButton(joystick, buttonNumber) != 0;
}
@@ -82,27 +85,34 @@
int
-Joystick::getXAxisDisplacement() const
+Joystick::getXAxisDisplacement(int stickNumber) const
{
- if (xAxis < -AXIS_THRESHOLD)
+ if (xAxis[stickNumber] < -AXIS_THRESHOLD)
return -1;
- if (xAxis > +AXIS_THRESHOLD)
+ if (xAxis[stickNumber] > +AXIS_THRESHOLD)
return +1;
return 0;
}
int
-Joystick::getYAxisDisplacement() const
+Joystick::getYAxisDisplacement(int stickNumber) const
{
- if (yAxis < -AXIS_THRESHOLD)
+ if (yAxis[stickNumber] < -AXIS_THRESHOLD)
return -1;
- if (yAxis > +AXIS_THRESHOLD)
+ if (yAxis[stickNumber] > +AXIS_THRESHOLD)
return +1;
return 0;
}
+int
+Joystick::getTriggerValue(int triggerNumber) const
+{
+ return SDL_JoystickGetAxis(joystick, triggerNumber);
+}
+
+
void
Joystick::update()
{
@@ -113,15 +123,11 @@
for (size_t i = joystickButtons.size(); i--; )
joystickButtons[static_cast(i)] = (getButton(i) != 0);
- // First check the D-pad, then the main joystick.
- // The player has the choice of using one or the other.
-
- int dpadAxis = SDL_JoystickGetAxis(joystick, SECONDARY_X);
- xAxis = (abs(dpadAxis) >= 32767 ? dpadAxis : SDL_JoystickGetAxis(joystick, MAIN_X));
-
- dpadAxis = SDL_JoystickGetAxis(joystick, SECONDARY_Y);
- yAxis = (abs(dpadAxis) >= 32767 ? dpadAxis : SDL_JoystickGetAxis(joystick, MAIN_Y));
-
// Update joystick button states.
SDL_JoystickUpdate();
-}
\ No newline at end of file
+
+ xAxis[0] = SDL_JoystickGetAxis(joystick, MAIN_X);
+ yAxis[0] = SDL_JoystickGetAxis(joystick, MAIN_Y);
+ xAxis[1] = SDL_JoystickGetAxis(joystick, SECONDARY_X);
+ yAxis[1] = SDL_JoystickGetAxis(joystick, SECONDARY_Y);
+}
diff -Nru flatzebra-0.1.5/src/flatzebra/Joystick.h flatzebra-0.1.6/src/flatzebra/Joystick.h
--- flatzebra-0.1.5/src/flatzebra/Joystick.h 2010-05-16 01:50:19.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/Joystick.h 2012-07-14 03:16:14.000000000 +0000
@@ -1,8 +1,8 @@
-/* $Id: Joystick.h,v 1.4 2010/05/16 01:50:19 sarrazip Exp $
+/* $Id: Joystick.h,v 1.9 2012/07/06 04:28:45 sarrazip Exp $
Joystick.h - Joystick or game pad encapsulation.
flatzebra - Generic 2D Game Engine library
- Copyright (C) 1999-2010 Pierre Sarrazin
+ Copyright (C) 1999-2012 Pierre Sarrazin
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#ifndef _H_Joystick
@@ -38,27 +38,40 @@
{
public:
- // These button numbers are specific to the Xbox 360 USB controller.
+ /* These button numbers are specific to the Xbox 360 USB controller.
+ See: http://en.wikipedia.org/wiki/Xbox_360_Controller
+ On GNU/Linux, this command can normally be used to see the button
+ and joystick numbers: jstest /dev/input/js0
+ */
enum
{
A_BTN = 0,
B_BTN = 1,
- Y_BTN = 3,
X_BTN = 2,
- START_BTN = 6,
- BACK_BTN = 10
+ Y_BTN = 3,
+ START_BTN = 7,
+ BACK_BTN = 6,
};
- // These axis numbers are specific to the Xbox 360 USB controller.
+ /* These axis numbers are specific to the Xbox 360 USB controller.
+ */
enum
{
// Main joystick.
MAIN_X = 0,
MAIN_Y = 1,
- // D-pad.
- SECONDARY_X = 6,
- SECONDARY_Y = 7
+ // Secondary joystick.
+ SECONDARY_X = 3,
+ SECONDARY_Y = 4
+ };
+
+ /* These trigger numbers are specific to the Xbox 360 USB controller.
+ */
+ enum
+ {
+ LT = 2, // Left Trigger
+ RT = 5, // Right Trigger
};
/* Asks SDL to open joystick number zero.
@@ -92,22 +105,28 @@
bool buttonJustPressed(int buttonNumber) const;
/* Returns value between -32768 (left) and 32767 (right).
+ stickNumber must be 0 (main joystick) or 1 (secondary joystick).
*/
- int getXAxisValue() const { return xAxis; }
+ int getXAxisValue(int stickNumber = 0) const { return xAxis[stickNumber]; }
/* Returns -1 if joystick is near the leftmost position,
+1 if it is near the rightmost position, or 0 otherwise.
*/
- int getXAxisDisplacement() const;
+ int getXAxisDisplacement(int stickNumber = 0) const;
/* Returns value between -32768 (up) and 32767 (down).
*/
- int getYAxisValue() const { return xAxis; }
+ int getYAxisValue(int stickNumber = 0) const { return yAxis[stickNumber]; }
/* Returns -1 if joystick is near the highest position,
+1 if it is near the lowest position, or 0 otherwise.
*/
- int getYAxisDisplacement() const;
+ int getYAxisDisplacement(int stickNumber = 0) const;
+
+ /* Returns value between -32768 (not pressed) and 32767 (fully pressed).
+ triggerNumber must be LT or RT (see previous enum).
+ */
+ int getTriggerValue(int triggerNumber) const;
/* Asks SDL to update the joystick state.
Also remembers the previous state of the buttons, which
@@ -130,8 +149,8 @@
SDL_Joystick *joystick;
std::vector joystickButtons; // previous state of buttons
- Sint16 xAxis; // -32768..32767
- Sint16 yAxis; // -32768..32767
+ Sint16 xAxis[2]; // -32768..32767
+ Sint16 yAxis[2]; // -32768..32767
// Forbidden operations:
Joystick(const Joystick &);
diff -Nru flatzebra-0.1.5/src/flatzebra/KeyState.h flatzebra-0.1.6/src/flatzebra/KeyState.h
--- flatzebra-0.1.5/src/flatzebra/KeyState.h 2010-05-12 01:44:16.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/KeyState.h 2010-06-05 20:50:42.000000000 +0000
@@ -1,4 +1,4 @@
-/* $Id: KeyState.h,v 1.3 2010/05/12 01:44:16 sarrazip Exp $
+/* $Id: KeyState.h,v 1.4 2010/06/05 20:50:42 sarrazip Exp $
KeyState.h - Representation of the state of a keyboard key
flatzebra - Generic 2D Game Engine library
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#ifndef _H_KeyState
diff -Nru flatzebra-0.1.5/src/flatzebra/Makefile.am flatzebra-0.1.6/src/flatzebra/Makefile.am
--- flatzebra-0.1.5/src/flatzebra/Makefile.am 2010-05-02 02:56:34.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/Makefile.am 2012-07-08 02:57:14.000000000 +0000
@@ -1,4 +1,4 @@
-# $Id: Makefile.am,v 1.3 2010/05/02 02:56:34 sarrazip Exp $
+# $Id: Makefile.am,v 1.7 2012/07/08 02:57:14 sarrazip Exp $
# Makefile.am
lib_LTLIBRARIES = libflatzebra-0.1.la
@@ -7,6 +7,7 @@
libflatzebra_0_1_la_SOURCES = \
Couple.h \
+ RCouple.cpp \
RCouple.h \
GameEngine.cpp \
GameEngine.h \
@@ -46,4 +47,3 @@
KeyState.h
MAINTAINERCLEANFILES = Makefile.in
-
diff -Nru flatzebra-0.1.5/src/flatzebra/Makefile.in flatzebra-0.1.6/src/flatzebra/Makefile.in
--- flatzebra-0.1.5/src/flatzebra/Makefile.in 2010-05-13 03:20:36.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/Makefile.in 2012-07-14 03:41:48.000000000 +0000
@@ -15,7 +15,7 @@
@SET_MAKE@
-# $Id: Makefile.am,v 1.3 2010/05/02 02:56:34 sarrazip Exp $
+# $Id: Makefile.am,v 1.7 2012/07/08 02:57:14 sarrazip Exp $
# Makefile.am
@@ -80,7 +80,8 @@
LTLIBRARIES = $(lib_LTLIBRARIES)
am__DEPENDENCIES_1 =
libflatzebra_0_1_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
-am_libflatzebra_0_1_la_OBJECTS = libflatzebra_0_1_la-GameEngine.lo \
+am_libflatzebra_0_1_la_OBJECTS = libflatzebra_0_1_la-RCouple.lo \
+ libflatzebra_0_1_la-GameEngine.lo \
libflatzebra_0_1_la-PixmapArray.lo \
libflatzebra_0_1_la-PixmapLoadError.lo \
libflatzebra_0_1_la-Sprite.lo libflatzebra_0_1_la-RSprite.lo \
@@ -140,6 +141,7 @@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
@@ -163,6 +165,7 @@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
MINVER_SDL = @MINVER_SDL@
MINVER_SDL_IMAGE = @MINVER_SDL_IMAGE@
MINVER_SDL_MIXER = @MINVER_SDL_MIXER@
@@ -181,6 +184,7 @@
PACKAGE_SUMMARY_EN = @PACKAGE_SUMMARY_EN@
PACKAGE_SUMMARY_FR = @PACKAGE_SUMMARY_FR@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
@@ -197,6 +201,7 @@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -230,7 +235,6 @@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
@@ -250,6 +254,7 @@
libflatzebra_0_1_la_LDFLAGS = -version-info 2:0:0 -no-undefined
libflatzebra_0_1_la_SOURCES = \
Couple.h \
+ RCouple.cpp \
RCouple.h \
GameEngine.cpp \
GameEngine.h \
@@ -366,6 +371,7 @@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libflatzebra_0_1_la-Joystick.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libflatzebra_0_1_la-PixmapArray.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libflatzebra_0_1_la-PixmapLoadError.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libflatzebra_0_1_la-RCouple.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libflatzebra_0_1_la-RSprite.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libflatzebra_0_1_la-SoundMixer.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libflatzebra_0_1_la-Sprite.Plo@am__quote@
@@ -391,6 +397,13 @@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $<
+libflatzebra_0_1_la-RCouple.lo: RCouple.cpp
+@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libflatzebra_0_1_la_CXXFLAGS) $(CXXFLAGS) -MT libflatzebra_0_1_la-RCouple.lo -MD -MP -MF $(DEPDIR)/libflatzebra_0_1_la-RCouple.Tpo -c -o libflatzebra_0_1_la-RCouple.lo `test -f 'RCouple.cpp' || echo '$(srcdir)/'`RCouple.cpp
+@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libflatzebra_0_1_la-RCouple.Tpo $(DEPDIR)/libflatzebra_0_1_la-RCouple.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='RCouple.cpp' object='libflatzebra_0_1_la-RCouple.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libflatzebra_0_1_la_CXXFLAGS) $(CXXFLAGS) -c -o libflatzebra_0_1_la-RCouple.lo `test -f 'RCouple.cpp' || echo '$(srcdir)/'`RCouple.cpp
+
libflatzebra_0_1_la-GameEngine.lo: GameEngine.cpp
@am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libflatzebra_0_1_la_CXXFLAGS) $(CXXFLAGS) -MT libflatzebra_0_1_la-GameEngine.lo -MD -MP -MF $(DEPDIR)/libflatzebra_0_1_la-GameEngine.Tpo -c -o libflatzebra_0_1_la-GameEngine.lo `test -f 'GameEngine.cpp' || echo '$(srcdir)/'`GameEngine.cpp
@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libflatzebra_0_1_la-GameEngine.Tpo $(DEPDIR)/libflatzebra_0_1_la-GameEngine.Plo
diff -Nru flatzebra-0.1.5/src/flatzebra/PixmapArray.cpp flatzebra-0.1.6/src/flatzebra/PixmapArray.cpp
--- flatzebra-0.1.5/src/flatzebra/PixmapArray.cpp 2010-04-25 01:15:57.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/PixmapArray.cpp 2012-07-14 03:14:17.000000000 +0000
@@ -1,8 +1,8 @@
-/* $Id: PixmapArray.cpp,v 1.2 2010/04/25 01:15:57 sarrazip Exp $
+/* $Id: PixmapArray.cpp,v 1.4 2012/03/28 02:55:45 sarrazip Exp $
PixmapArray.cpp - Object containing an array of Pixmaps.
flatzebra - Generic 2D Game Engine library
- Copyright (C) 1999, 2000, 2001 Pierre Sarrazin
+ Copyright (C) 1999-2012 Pierre Sarrazin
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#include
@@ -28,28 +28,39 @@
using namespace flatzebra;
-PixmapArray::PixmapArray(size_t numImages)
- : images(numImages, NULL),
+PixmapArray::PixmapArray(size_t)
+ : images(),
imageSize(0, 0)
{
- assert(numImages > 0);
}
PixmapArray::~PixmapArray()
{
+ freeImages();
+}
+
+
+void
+PixmapArray::freeImages()
+{
for (vector::iterator it = images.begin();
it != images.end(); it++)
SDL_FreeSurface(*it);
+
+ images.clear();
}
void
PixmapArray::setArrayElement(size_t i, SDL_Surface *image)
{
- assert(i < images.size());
+ assert(i < 10000); // sanity check
assert(image != NULL);
+ if (i >= images.size())
+ images.resize(i + 1, NULL);
+
images[i] = image;
}
diff -Nru flatzebra-0.1.5/src/flatzebra/PixmapArray.h flatzebra-0.1.6/src/flatzebra/PixmapArray.h
--- flatzebra-0.1.5/src/flatzebra/PixmapArray.h 2010-04-25 01:15:57.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/PixmapArray.h 2012-07-14 03:14:30.000000000 +0000
@@ -1,8 +1,8 @@
-/* $Id: PixmapArray.h,v 1.2 2010/04/25 01:15:57 sarrazip Exp $
+/* $Id: PixmapArray.h,v 1.5 2012/07/08 02:57:14 sarrazip Exp $
PixmapArray.h - Object containing an array of Pixmaps.
flatzebra - Generic 2D Game Engine library
- Copyright (C) 1999, 2000, 2001 Pierre Sarrazin
+ Copyright (C) 1999-2012 Pierre Sarrazin
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#ifndef _H_PixmapArray
@@ -40,37 +40,39 @@
{
public:
- PixmapArray(size_t numImages);
- /* Creates a pixmap array capable of containing 'numImages' images.
- 'numImages' must be positive.
+ /* Creates a pixmap array.
This object is the owner of the pixmaps, and the destructor will
take care of freeing them.
+ The argument is ignored.
+ setArrayElement() will grow the internal vector as needed.
*/
+ PixmapArray(size_t = 0);
+ /* Calls freeImages().
+ */
~PixmapArray();
- /* Calls freePixmaps().
+
+ /* Destroys the images and frees the resources taken by the pixmaps.
*/
+ void freeImages();
- SDL_Surface *getImage(size_t i) const;
- size_t getNumImages() const;
/* Returns the pixmap of the image at index 'i' of the
arrays given to the constructor of this object.
'i' must be lower than the value returned by getNumImages().
- This method must not be called if freePixmaps() has been called
- on this object.
*/
+ SDL_Surface *getImage(size_t i) const;
+ size_t getNumImages() const;
- void setArrayElement(size_t i, SDL_Surface *image);
- /* 'i' must be a valid index in the array.
- 'image' must not be null.
+ /* 'image' must not be null.
*/
+ void setArrayElement(size_t i, SDL_Surface *image);
- void setImageSize(Couple size);
- Couple getImageSize() const;
/* Sets or gets the size in pixels of the images in the pixmap array.
All images in the array are assumed to be of the same size.
Neither size.x nor size.y are allowed to be zero.
*/
+ void setImageSize(Couple size);
+ Couple getImageSize() const;
private:
@@ -78,7 +80,7 @@
Couple imageSize; // size in pixels of the images; all assumed same size
- /* Forbidden operations:
+ /* Forbidden operations:
*/
PixmapArray(const PixmapArray &x);
PixmapArray &operator = (const PixmapArray &x);
diff -Nru flatzebra-0.1.5/src/flatzebra/PixmapLoadError.cpp flatzebra-0.1.6/src/flatzebra/PixmapLoadError.cpp
--- flatzebra-0.1.5/src/flatzebra/PixmapLoadError.cpp 2010-04-25 01:17:13.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/PixmapLoadError.cpp 2010-06-05 20:50:42.000000000 +0000
@@ -1,4 +1,4 @@
-/* $Id: PixmapLoadError.cpp,v 1.1 2003/04/26 04:19:06 sarrazip Exp $
+/* $Id: PixmapLoadError.cpp,v 1.2 2010/06/05 20:50:42 sarrazip Exp $
PixmapLoadError.cpp - Exception describing an error when loading a pixmap
flatzebra - Generic 2D Game Engine library
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#include
diff -Nru flatzebra-0.1.5/src/flatzebra/PixmapLoadError.h flatzebra-0.1.6/src/flatzebra/PixmapLoadError.h
--- flatzebra-0.1.5/src/flatzebra/PixmapLoadError.h 2010-04-25 01:15:57.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/PixmapLoadError.h 2010-06-05 20:50:42.000000000 +0000
@@ -1,4 +1,4 @@
-/* $Id: PixmapLoadError.h,v 1.2 2010/04/25 01:15:57 sarrazip Exp $
+/* $Id: PixmapLoadError.h,v 1.3 2010/06/05 20:50:42 sarrazip Exp $
PixmapLoadError.h - Exception describing an error when loading a pixmap
flatzebra - Generic 2D Game Engine library
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#ifndef _H_PixmapLoadError
diff -Nru flatzebra-0.1.5/src/flatzebra/RCouple.cpp flatzebra-0.1.6/src/flatzebra/RCouple.cpp
--- flatzebra-0.1.5/src/flatzebra/RCouple.cpp 1970-01-01 00:00:00.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/RCouple.cpp 2012-07-14 03:16:11.000000000 +0000
@@ -0,0 +1,77 @@
+/* $Id: RCouple.cpp,v 1.2 2012/07/06 04:28:45 sarrazip Exp $
+ RCouple.h - Class representing a couple of integers.
+
+ flatzebra - Generic 2D Game Engine library
+ Copyright (C) 1999-2012 Pierre Sarrazin
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
+*/
+
+#include
+
+using namespace flatzebra;
+
+
+const double RCouple::tolerance = 0.0001;
+
+
+bool
+RCouple::rectangleCollision(const RCouple &pos1,
+ const RCouple &size1,
+ const RCouple &pos2,
+ const RCouple &size2)
+{
+ if (pos1.x + size1.x <= pos2.x) // s1 at the left of s2
+ return false;
+ if (pos1.y + size1.y <= pos2.y) // s1 above s2
+ return false;
+ if (pos2.x + size2.x <= pos1.x) // s1 at the right of s2
+ return false;
+ if (pos2.y + size2.y <= pos1.y) // s1 below s2
+ return false;
+ return true;
+}
+
+
+RCouple
+RCouple::getClosestPointOnSegment(const RCouple &segStart,
+ const RCouple &segEnd) const
+{
+ assert(segStart != segEnd); // this condition avoids division by zero
+ RCouple seg = segEnd - segStart;
+ RCouple c = *this - segStart;
+ double t = seg.dotProduct(c) / seg.dotProduct(seg); // project pt on segment
+ if (t < 0.0)
+ t = 0.0;
+ else if (t > 1.0)
+ t = 1.0;
+ return segStart + t * seg;
+}
+
+
+bool
+RCouple::isOnSegment(const RCouple &segStart,
+ const RCouple &segEnd) const
+{
+ assert(segStart != segEnd); // this condition avoids division by zero
+ RCouple seg = segEnd - segStart;
+ RCouple c = *this - segStart;
+ double t = seg.dotProduct(c) / seg.dotProduct(seg); // project pt on segment
+ if (t < 0.0 || t > 1.0)
+ return false;
+ RCouple proj = segStart + t * seg;
+ return proj == *this;
+}
diff -Nru flatzebra-0.1.5/src/flatzebra/RCouple.h flatzebra-0.1.6/src/flatzebra/RCouple.h
--- flatzebra-0.1.5/src/flatzebra/RCouple.h 2010-04-25 01:15:57.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/RCouple.h 2012-07-14 03:16:09.000000000 +0000
@@ -1,8 +1,8 @@
-/* $Id: RCouple.h,v 1.3 2010/04/25 01:15:57 sarrazip Exp $
+/* $Id: RCouple.h,v 1.6 2012/07/06 04:28:45 sarrazip Exp $
RCouple.h - Class representing a couple of integers.
flatzebra - Generic 2D Game Engine library
- Copyright (C) 1999-2003 Pierre Sarrazin
+ Copyright (C) 1999-2012 Pierre Sarrazin
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#ifndef _H_RCouple
@@ -25,6 +25,7 @@
#include
+#include
#include
@@ -84,10 +85,25 @@
/* Returns true iff one or both components differ from zero.
*/
+ double squaredLength() const;
+ /* Returns the square of the length of the vector represented by the RCouple.
+ */
+
double length() const;
/* Returns the length of the vector represented by the RCouple.
*/
+ RCouple normalize() const;
+ /* Returns a vector with the same direction as this one, but of length 1.
+ If this vector is the origin, the origin is returned.
+ */
+
+ RCouple setLength(double newLength) const;
+ /* Returns a vector with the same direction as this one, but of the
+ specified length.
+ If this vector is the origin, the origin is returned.
+ */
+
Couple round() const;
/* Returns an integer couple created from the rounded values of
this floating point couple.
@@ -118,6 +134,70 @@
friend bool operator == (const RCouple &c1, const RCouple &c2);
friend bool operator != (const RCouple &c1, const RCouple &c2);
+ static bool rectangleCollision(const RCouple &pos1,
+ const RCouple &rect1,
+ const RCouple &pos2,
+ const RCouple &size2);
+ /* Indicates if the two specified rectangles collide.
+ They collide if they have an intersection that has a non-zero surface.
+ pos1 and pos2 must be the upper-left coordinates of the rectangles.
+ */
+
+ double dotProduct(const RCouple &c) const;
+ /* Returns the scalar product of this couple with the given one.
+ */
+
+ RCouple project(const RCouple &c) const;
+ /* Returns the projection of vector 'c' on this vector.
+ This vector must not be zero. (See isZero() and isNonZero().)
+ */
+
+ RCouple getClosestPointOnSegment(const RCouple &segStart,
+ const RCouple &segEnd) const;
+ /* Returns the point on the given segment that is closest to this point.
+ segStart and segEnd give the end points of the segment, and must not
+ be equal.
+ If the projection of *this on the segment lies "before" segStart,
+ then segStart is returned; if the projection lies "after" segEnd,
+ then segEnd is returned.
+ */
+
+ bool isOnSegment(const RCouple &segStart,
+ const RCouple &segEnd) const;
+ /* Return true if this point lies on the given segment.
+ segStart and segEnd give the end points of the segment, and must not
+ be equal.
+ */
+
+ static const double tolerance;
+ /* Tolerance used in floating point comparisons when determining
+ if two values are "extremely" close.
+ */
+
+ bool safeEqual(const RCouple &c) const;
+ /* Indicates if this vector is "extremely" close to 'c'.
+ */
+
+ static bool safeEqual(double a, double b);
+ /* Indicates if the two numbers are "extremely" close.
+ */
+
+ static bool safeLower(double a, double b);
+ /* Indicates if the two numbers are a < b and not "extremely" close.
+ */
+
+ static bool safeLowerOrEqual(double a, double b);
+ /* Indicates if a < b or the two numbers are "extremely" close.
+ */
+
+ static bool safeGreater(double a, double b);
+ /* Indicates if the two numbers are a > b and not "extremely" close.
+ */
+
+ static bool safeGreaterOrEqual(double a, double b);
+ /* Indicates if a > b or the two numbers are "extremely" close.
+ */
+
};
@@ -269,12 +349,34 @@
}
+inline double RCouple::squaredLength() const
+{
+ return x * x + y * y;
+}
+
+
inline double RCouple::length() const
{
return hypot(x, y);
}
+inline RCouple RCouple::normalize() const
+{
+ if (isZero())
+ return RCouple();
+ return *this / length();
+}
+
+
+inline RCouple RCouple::setLength(double newLength) const
+{
+ if (isZero())
+ return RCouple();
+ return *this / length() * newLength;
+}
+
+
inline Couple RCouple::round() const
{
return Couple(
@@ -294,6 +396,55 @@
}
+inline double RCouple::dotProduct(const RCouple &c) const
+{
+ return x * c.x + y * c.y;
+}
+
+
+inline RCouple RCouple::project(const RCouple &c) const
+{
+ assert(isNonZero());
+ return (dotProduct(c) / dotProduct(*this)) * *this;
+}
+
+
+inline bool RCouple::safeEqual(const RCouple &c) const
+{
+ return fabs(x - c.x) < tolerance && fabs(y - c.y) < tolerance;
+}
+
+
+inline bool RCouple::safeEqual(double a, double b)
+{
+ return fabs(a - b) < tolerance;
+}
+
+
+inline bool RCouple::safeLower(double a, double b)
+{
+ return !safeEqual(a, b) && a < b;
+}
+
+
+inline bool RCouple::safeLowerOrEqual(double a, double b)
+{
+ return safeEqual(a, b) || a < b;
+}
+
+
+inline bool RCouple::safeGreater(double a, double b)
+{
+ return !safeEqual(a, b) && a > b;
+}
+
+
+inline bool RCouple::safeGreaterOrEqual(double a, double b)
+{
+ return safeEqual(a, b) || a > b;
+}
+
+
} // namespace flatzebra
diff -Nru flatzebra-0.1.5/src/flatzebra/RSprite.cpp flatzebra-0.1.6/src/flatzebra/RSprite.cpp
--- flatzebra-0.1.5/src/flatzebra/RSprite.cpp 2010-05-16 01:50:19.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/RSprite.cpp 2010-07-31 05:29:45.000000000 +0000
@@ -1,4 +1,4 @@
-/* $Id: RSprite.cpp,v 1.3 2010/05/16 01:50:19 sarrazip Exp $
+/* $Id: RSprite.cpp,v 1.5 2010/07/31 05:29:45 sarrazip Exp $
RSprite.cpp - Sprite with floating point coordinates in a 2D game.
flatzebra - Generic 2D Game Engine library
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#include
@@ -81,16 +81,7 @@
const RCouple &pos2 = s2.getPos() + s2.collBoxPos;
const RCouple &size2 = s2.collBoxSize;
- if (pos1.x + size1.x <= pos2.x) // s1 at the left of s2
- return false;
- if (pos1.y + size1.y <= pos2.y) // s1 above s2
- return false;
- if (pos2.x + size2.x <= pos1.x) // s1 at the right of s2
- return false;
- if (pos2.y + size2.y <= pos1.y) // s1 below s2
- return false;
-
- return true;
+ return RCouple::rectangleCollision(pos1, size1, pos2, size2);
}
diff -Nru flatzebra-0.1.5/src/flatzebra/RSprite.h flatzebra-0.1.6/src/flatzebra/RSprite.h
--- flatzebra-0.1.5/src/flatzebra/RSprite.h 2010-04-25 01:15:57.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/RSprite.h 2010-07-31 05:29:45.000000000 +0000
@@ -1,4 +1,4 @@
-/* $Id: RSprite.h,v 1.2 2010/04/25 01:15:57 sarrazip Exp $
+/* $Id: RSprite.h,v 1.4 2010/07/31 05:29:45 sarrazip Exp $
RSprite.h - Sprite with floating point coordinates in a 2D game.
flatzebra - Generic 2D Game Engine library
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#ifndef _H_RSprite
@@ -88,7 +88,16 @@
*/
RCouple getCenterPos() const;
- /* Returns the position of the center of this sprite.
+ /* Returns the position of the center of this sprite.
+ */
+
+ void setCenterPos(const RCouple &c);
+ /* Sets the (top-left) position so that 'c' becomes the center position.
+ */
+
+ RCouple getLowerLeftPos() const;
+ /* Returns the position of the lower left corner of the rectangle
+ that contains the sprite.
*/
RCouple getLowerRightPos() const;
@@ -139,7 +148,7 @@
'currentPixmapIndex' is initially zero.
*/
-
+
long *values; // array
size_t numUserValues;
@@ -245,6 +254,22 @@
}
inline
+void
+RSprite::setCenterPos(const RCouple &c)
+{
+ pos = c - size / 2;
+}
+
+
+inline
+RCouple
+RSprite::getLowerLeftPos() const
+{
+ return RCouple(pos.x, pos.y + size.y);
+}
+
+
+inline
RCouple
RSprite::getLowerRightPos() const
{
diff -Nru flatzebra-0.1.5/src/flatzebra/SoundMixer.cpp flatzebra-0.1.6/src/flatzebra/SoundMixer.cpp
--- flatzebra-0.1.5/src/flatzebra/SoundMixer.cpp 2010-05-16 01:50:19.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/SoundMixer.cpp 2010-12-31 02:20:44.000000000 +0000
@@ -1,4 +1,4 @@
-/* $Id: SoundMixer.cpp,v 1.4 2010/05/16 01:50:19 sarrazip Exp $
+/* $Id: SoundMixer.cpp,v 1.7 2010/12/31 02:20:44 sarrazip Exp $
SoundMixer.cpp - Sound mixer based on the SDL_mixer library
flatzebra - Generic 2D Game Engine library
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#include "SoundMixer.h"
@@ -28,7 +28,13 @@
SoundMixer::SoundMixer(int numChannels) throw(Error)
{
- if (Mix_OpenAudio(11025, AUDIO_U8, 1, 128) == -1)
+ int chunksize;
+ #ifdef _MSC_VER
+ chunksize = 512;
+ #else
+ chunksize = 128;
+ #endif
+ if (Mix_OpenAudio(11025, AUDIO_U8, 1, chunksize) == -1)
throw Error("SoundMixer(): " + string(Mix_GetError()));
Mix_AllocateChannels(numChannels);
diff -Nru flatzebra-0.1.5/src/flatzebra/SoundMixer.h flatzebra-0.1.6/src/flatzebra/SoundMixer.h
--- flatzebra-0.1.5/src/flatzebra/SoundMixer.h 2010-05-16 01:50:19.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/SoundMixer.h 2010-06-05 20:50:42.000000000 +0000
@@ -1,4 +1,4 @@
-/* $Id: SoundMixer.h,v 1.4 2010/05/16 01:50:19 sarrazip Exp $
+/* $Id: SoundMixer.h,v 1.5 2010/06/05 20:50:42 sarrazip Exp $
SoundMixer.h - Sound mixer based on the SDL_mixer library
flatzebra - Generic 2D Game Engine library
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#ifndef _H_SoundMixer
diff -Nru flatzebra-0.1.5/src/flatzebra/Sprite.cpp flatzebra-0.1.6/src/flatzebra/Sprite.cpp
--- flatzebra-0.1.5/src/flatzebra/Sprite.cpp 2010-05-16 01:50:19.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/Sprite.cpp 2010-12-31 02:20:44.000000000 +0000
@@ -1,4 +1,4 @@
-/* $Id: Sprite.cpp,v 1.4 2010/05/16 01:50:19 sarrazip Exp $
+/* $Id: Sprite.cpp,v 1.6 2010/12/31 02:20:44 sarrazip Exp $
Sprite.cpp - Sprite in a 2D game.
flatzebra - Generic 2D Game Engine library
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#include
@@ -46,7 +46,7 @@
///////////////////////////////////////////////////////////////////////////////
-uint32_t Sprite::idGenerator = 0;
+Uint32 Sprite::idGenerator = 0;
Sprite::Sprite(const PixmapArray &pixmapArray,
diff -Nru flatzebra-0.1.5/src/flatzebra/Sprite.h flatzebra-0.1.6/src/flatzebra/Sprite.h
--- flatzebra-0.1.5/src/flatzebra/Sprite.h 2010-04-25 01:15:58.000000000 +0000
+++ flatzebra-0.1.6/src/flatzebra/Sprite.h 2010-12-31 02:20:44.000000000 +0000
@@ -1,4 +1,4 @@
-/* $Id: Sprite.h,v 1.3 2010/04/25 01:15:58 sarrazip Exp $
+/* $Id: Sprite.h,v 1.7 2010/12/31 02:20:44 sarrazip Exp $
Sprite.h - Sprite in a 2D game.
flatzebra - Generic 2D Game Engine library
@@ -16,8 +16,8 @@
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA.
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
*/
#ifndef _H_Sprite
@@ -26,7 +26,6 @@
#include
#include
-#include
#include
@@ -91,6 +90,15 @@
/* Returns the position of the center of this sprite.
*/
+ void setCenterPos(const Couple &c);
+ /* Sets the (top-left) position so that 'c' becomes the center position.
+ */
+
+ Couple getLowerLeftPos() const;
+ /* Returns the position of the lower left corner of the rectangle
+ that contains the sprite.
+ */
+
Couple getLowerRightPos() const;
/* Returns the position of the lower right corner of the rectangle
that contains the sprite.
@@ -139,7 +147,7 @@
'currentPixmapIndex' is initially zero.
*/
-
+
long *values; // array
size_t numUserValues;
@@ -150,7 +158,10 @@
It is assumed that the top left corner of the setting is (0, 0).
*/
- uint32_t getId() const;
+ Uint32 getId() const;
+ /* Returns the unique instance ID of this sprite over a single
+ program execution.
+ */
protected: // data became protected with version 0.1 @sarrazip 20010203
@@ -172,9 +183,9 @@
// position of collision box w.r.t. to top left corner of sprite
Couple collBoxSize;
- uint32_t id; // unique instance ID over a single program execution
+ Uint32 id; // unique instance ID over a single program execution
- static uint32_t idGenerator; // used to generate 'id' field in each object
+ static Uint32 idGenerator; // used to generate 'id' field in each object
private:
/* Forbidden operations:
@@ -251,6 +262,20 @@
}
inline
+void
+Sprite::setCenterPos(const Couple &c)
+{
+ pos = c - size / 2;
+}
+
+inline
+Couple
+Sprite::getLowerLeftPos() const
+{
+ return Couple(pos.x, pos.y + size.y);
+}
+
+inline
Couple
Sprite::getLowerRightPos() const
{
@@ -384,7 +409,7 @@
}
inline
-uint32_t
+Uint32
Sprite::getId() const
{
return id;