diff -Nru fmtools-2.0.4/aclocal.m4 fmtools-2.0.5/aclocal.m4 --- fmtools-2.0.4/aclocal.m4 2010-05-01 18:53:03.000000000 +0000 +++ fmtools-2.0.5/aclocal.m4 2010-11-24 13:28:23.000000000 +0000 @@ -1,7 +1,7 @@ -# generated automatically by aclocal 1.10.2 -*- Autoconf -*- +# generated automatically by aclocal 1.10.3 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,8 +13,8 @@ m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],, -[m4_warning([this file was generated for autoconf 2.65. +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],, +[m4_warning([this file was generated for autoconf 2.67. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) @@ -34,7 +34,7 @@ [am__api_version='1.10' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.10.2], [], +m4_if([$1], [1.10.3], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -50,7 +50,7 @@ # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.10.2])dnl +[AM_AUTOMAKE_VERSION([1.10.3])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) @@ -143,14 +143,14 @@ Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 9 +# serial 10 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, @@ -207,6 +207,16 @@ if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and @@ -224,7 +234,17 @@ done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested @@ -234,19 +254,23 @@ break fi ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; none) break ;; esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message @@ -310,59 +334,61 @@ # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -#serial 4 +#serial 5 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[# Autoconf 2.62 quotes --file arguments for eval, but not when files -# are listed without --file. Let's play safe and only enable the eval -# if we detect the quoting. -case $CONFIG_FILES in -*\'*) eval set x "$CONFIG_FILES" ;; -*) set x $CONFIG_FILES ;; -esac -shift -for mf -do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" +[{ + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done done -done +} ])# _AM_OUTPUT_DEPENDENCY_COMMANDS @@ -382,7 +408,7 @@ # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2008 Free Software Foundation, Inc. +# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -456,8 +482,8 @@ AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. diff -Nru fmtools-2.0.4/configure fmtools-2.0.5/configure --- fmtools-2.0.4/configure 2010-05-01 18:53:05.000000000 +0000 +++ fmtools-2.0.5/configure 2010-11-24 13:28:24.000000000 +0000 @@ -1,13 +1,13 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.65 for fmtools 2.0.3. +# Generated by GNU Autoconf 2.67 for fmtools 2.0.5. # # Report bugs to . # # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. +# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software +# Foundation, Inc. # # # This configure script is free software; the Free Software Foundation @@ -318,7 +318,7 @@ test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p @@ -358,19 +358,19 @@ fi # as_fn_arith -# as_fn_error ERROR [LINENO LOG_FD] -# --------------------------------- +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with status $?, using 1 if that was 0. +# script with STATUS, using 1 if that was 0. as_fn_error () { - as_status=$?; test $as_status -eq 0 && as_status=1 - if test "$3"; then - as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi - $as_echo "$as_me: error: $1" >&2 + $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error @@ -532,7 +532,7 @@ exec 6>&1 # Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` @@ -551,8 +551,8 @@ # Identity of this package. PACKAGE_NAME='fmtools' PACKAGE_TARNAME='fmtools' -PACKAGE_VERSION='2.0.3' -PACKAGE_STRING='fmtools 2.0.3' +PACKAGE_VERSION='2.0.5' +PACKAGE_STRING='fmtools 2.0.5' PACKAGE_BUGREPORT='blp@cs.stanford.edu' PACKAGE_URL='' @@ -711,8 +711,9 @@ fi case $ac_option in - *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *) ac_optarg=yes ;; + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. @@ -757,7 +758,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid feature name: $ac_useropt" + as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -783,7 +784,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid feature name: $ac_useropt" + as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -987,7 +988,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid package name: $ac_useropt" + as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1003,7 +1004,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid package name: $ac_useropt" + as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1033,8 +1034,8 @@ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) as_fn_error "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information." + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" ;; *=*) @@ -1042,7 +1043,7 @@ # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error "invalid variable name: \`$ac_envvar'" ;; + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; @@ -1060,13 +1061,13 @@ if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error "missing argument to $ac_option" + as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; - fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi @@ -1089,7 +1090,7 @@ [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac - as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' @@ -1103,8 +1104,8 @@ if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 + $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used" >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -1119,9 +1120,9 @@ ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error "working directory cannot be determined" + as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error "pwd does not report name of working directory" + as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. @@ -1160,11 +1161,11 @@ fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then @@ -1190,7 +1191,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures fmtools 2.0.3 to adapt to many kinds of systems. +\`configure' configures fmtools 2.0.5 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1204,7 +1205,7 @@ --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages + -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files @@ -1256,7 +1257,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of fmtools 2.0.3:";; + short | recursive ) echo "Configuration of fmtools 2.0.5:";; esac cat <<\_ACEOF @@ -1342,10 +1343,10 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -fmtools configure 2.0.3 -generated by GNU Autoconf 2.65 +fmtools configure 2.0.5 +generated by GNU Autoconf 2.67 -Copyright (C) 2009 Free Software Foundation, Inc. +Copyright (C) 2010 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF @@ -1397,8 +1398,8 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by fmtools $as_me 2.0.3, which was -generated by GNU Autoconf 2.65. Invocation command line was +It was created by fmtools $as_me 2.0.5, which was +generated by GNU Autoconf 2.67. Invocation command line was $ $0 $@ @@ -1508,11 +1509,9 @@ { echo - cat <<\_ASBOX -## ---------------- ## + $as_echo "## ---------------- ## ## Cache variables. ## -## ---------------- ## -_ASBOX +## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( @@ -1546,11 +1545,9 @@ ) echo - cat <<\_ASBOX -## ----------------- ## + $as_echo "## ----------------- ## ## Output variables. ## -## ----------------- ## -_ASBOX +## ----------------- ##" echo for ac_var in $ac_subst_vars do @@ -1563,11 +1560,9 @@ echo if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------------- ## + $as_echo "## ------------------- ## ## File substitutions. ## -## ------------------- ## -_ASBOX +## ------------------- ##" echo for ac_var in $ac_subst_files do @@ -1581,11 +1576,9 @@ fi if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## + $as_echo "## ----------- ## ## confdefs.h. ## -## ----------- ## -_ASBOX +## ----------- ##" echo cat confdefs.h echo @@ -1640,7 +1633,12 @@ ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then - ac_site_file1=$CONFIG_SITE + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site @@ -1655,7 +1653,11 @@ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5 ; } fi done @@ -1731,7 +1733,7 @@ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## @@ -1746,16 +1748,22 @@ ac_aux_dir= for ac_dir in build-aux "$srcdir"/build-aux; do - for ac_t in install-sh install.sh shtool; do - if test -f "$ac_dir/$ac_t"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/$ac_t -c" - break 2 - fi - done + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi done if test -z "$ac_aux_dir"; then - as_fn_error "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5 + as_fn_error $? "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5 fi # These three variables are undocumented and unsupported, @@ -1886,7 +1894,7 @@ # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". - as_fn_error "ls -t appears to fail. Make sure there is not a broken + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi @@ -1896,7 +1904,7 @@ # Ok. : else - as_fn_error "newly created file is older than distributed files! + as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 @@ -1924,6 +1932,108 @@ $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi +install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then @@ -2018,7 +2128,7 @@ $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF @@ -2026,7 +2136,7 @@ all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; @@ -2060,7 +2170,7 @@ am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then - as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi @@ -2076,7 +2186,7 @@ # Define the identity of the package. PACKAGE='fmtools' - VERSION='2.0.3' + VERSION='2.0.5' cat >>confdefs.h <<_ACEOF @@ -2104,108 +2214,6 @@ MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} -install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. @@ -2520,8 +2528,8 @@ test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "no acceptable C compiler found in \$PATH -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5 ; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 @@ -2635,9 +2643,8 @@ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ as_fn_set_status 77 -as_fn_error "C compiler cannot create executables -See \`config.log' for more details." "$LINENO" 5; }; } +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5 ; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } @@ -2679,8 +2686,8 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5 ; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 @@ -2737,9 +2744,9 @@ else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot run C compiled programs. +as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. -See \`config.log' for more details." "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5 ; } fi fi fi @@ -2790,8 +2797,8 @@ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot compute suffix of object files: cannot compile -See \`config.log' for more details." "$LINENO" 5; } +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5 ; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi @@ -3103,6 +3110,11 @@ if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and @@ -3120,7 +3132,17 @@ done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested @@ -3130,19 +3152,23 @@ break fi ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; none) break ;; esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message @@ -3304,6 +3330,7 @@ ac_libobjs= ac_ltlibobjs= +U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' @@ -3319,11 +3346,11 @@ if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error "conditional \"AMDEP\" was never defined. + as_fn_error $? "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error "conditional \"am__fastdepCC\" was never defined. + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi @@ -3473,19 +3500,19 @@ (unset CDPATH) >/dev/null 2>&1 && unset CDPATH -# as_fn_error ERROR [LINENO LOG_FD] -# --------------------------------- +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with status $?, using 1 if that was 0. +# script with STATUS, using 1 if that was 0. as_fn_error () { - as_status=$?; test $as_status -eq 0 && as_status=1 - if test "$3"; then - as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi - $as_echo "$as_me: error: $1" >&2 + $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error @@ -3681,7 +3708,7 @@ test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p @@ -3734,8 +3761,8 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by fmtools $as_me 2.0.3, which was -generated by GNU Autoconf 2.65. Invocation command line was +This file was extended by fmtools $as_me 2.0.5, which was +generated by GNU Autoconf 2.67. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -3791,11 +3818,11 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -fmtools config.status 2.0.3 -configured by $0, generated by GNU Autoconf 2.65, +fmtools config.status 2.0.5 +configured by $0, generated by GNU Autoconf 2.67, with options \\"\$ac_cs_config\\" -Copyright (C) 2009 Free Software Foundation, Inc. +Copyright (C) 2010 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -3813,11 +3840,16 @@ while test $# != 0 do case $1 in - --*=*) + --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; *) ac_option=$1 ac_optarg=$2 @@ -3839,6 +3871,7 @@ $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; @@ -3849,7 +3882,7 @@ ac_cs_silent=: ;; # This is an error. - -*) as_fn_error "unrecognized option: \`$1' + -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" @@ -3909,7 +3942,7 @@ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "atlocal") CONFIG_FILES="$CONFIG_FILES atlocal" ;; - *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;; esac done @@ -3946,7 +3979,7 @@ { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") -} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. @@ -3963,7 +3996,7 @@ fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\r' + ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi @@ -3977,18 +4010,18 @@ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -4077,20 +4110,28 @@ else cat fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ - || as_fn_error "could not setup config files machinery" "$LINENO" 5 + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// s/^[^=]*=[ ]*$// }' fi @@ -4108,7 +4149,7 @@ esac case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac @@ -4136,7 +4177,7 @@ [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" @@ -4163,7 +4204,7 @@ case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin" \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac @@ -4300,22 +4341,22 @@ $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 +which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} +which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out" && rm -f "$tmp/out";; *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; @@ -4326,27 +4367,28 @@ case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || # Autoconf 2.62 quotes --file arguments for eval, but not when files -# are listed without --file. Let's play safe and only enable the eval -# if we detect the quoting. -case $CONFIG_FILES in -*\'*) eval set x "$CONFIG_FILES" ;; -*) set x $CONFIG_FILES ;; -esac -shift -for mf -do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ @@ -4369,28 +4411,28 @@ q } s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ @@ -4413,16 +4455,17 @@ q } s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done done -done +} ;; "./atconfig":C) cat >./atconfig <>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit $? + $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 diff -Nru fmtools-2.0.4/configure.ac fmtools-2.0.5/configure.ac --- fmtools-2.0.4/configure.ac 2010-05-01 18:51:32.000000000 +0000 +++ fmtools-2.0.5/configure.ac 2010-11-24 13:27:46.000000000 +0000 @@ -1,4 +1,4 @@ -AC_INIT([fmtools], [2.0.3], [blp@cs.stanford.edu]) +AC_INIT([fmtools], [2.0.5], [blp@cs.stanford.edu]) AC_CONFIG_AUX_DIR([build-aux]) AM_INIT_AUTOMAKE([foreign]) AC_PREREQ([2.59]) diff -Nru fmtools-2.0.4/cscope.files fmtools-2.0.5/cscope.files --- fmtools-2.0.4/cscope.files 2009-12-13 20:52:02.000000000 +0000 +++ fmtools-2.0.5/cscope.files 1970-01-01 00:00:00.000000000 +0000 @@ -1,5 +0,0 @@ -./fm.c -./fmscan.c -./fmlib.h -./fmlib.c -./.#fmscan.c Binary files /tmp/uGAZcP3e1X/fmtools-2.0.4/cscope.in.out and /tmp/OOyYA_kmCw/fmtools-2.0.5/cscope.in.out differ diff -Nru fmtools-2.0.4/cscope.out fmtools-2.0.5/cscope.out --- fmtools-2.0.4/cscope.out 2009-12-13 20:52:02.000000000 +0000 +++ fmtools-2.0.5/cscope.out 1970-01-01 00:00:00.000000000 +0000 @@ -1,2619 +0,0 @@ -cscope 15 $HOME/debian/fmtools/fmtools.git -q 0000000182 0000014649 - @fm.c - -20  - ~ - -21  - ~<”șo.h -> - -22  - ~<Ądio.h -> - -23  - ~ - -24  - ~<ĄdboȚ.h -> - -25  - ~<Ądšt.h -> - -26  - ~<Ądlib.h -> - -27  - ~ - -28  - ~ - -29  - ~<Ąršg.h -> - -30  - ~ - -32  - ~"fmlib.h -" - -34  - #DEFAULT_DEVICE - "/dev/żdio0" - - ) - -37 - $țamp -( -łrûÁ -) - -39  -łrûÁ - < 0.0 ? 0.0 :…ercent > 100.0 ? 100.0 :…ercent; - -40 - } -} - -43 - $cÚv”t_time - (cÚĄ * -Ąršg -) - -45 ià( - `Ąrcmp -( -Ąršg -, "forever") == 0 || - -46 - `Ąrcmp -( -Ąršg -, "-") == 0 || - -47 - `©oi -( -Ąršg -) < 0) - -49 ià( - `Ąrcmp -( -Ąršg -, "none") == 0 || - -50 - `Ąrcmp -( -Ąršg -, "0") == 0) - -54  -wÜktime -[80+1]; - -55  -š‰ime -; - -56 cÚĄ * -suffix -; - -58 -suffix - = -Ąršg - + - `Ąr„n -(string, "0123456789"); - -60 - `Ąșęy -( -wÜktime -, -Ąršg -, -suffix - - string); - -61 -wÜktime -[ -suffix - - -Ąršg -] = '\0'; - -62 -š‰ime - = - `©oi -( -wÜktime -); - -64 * -suffix -) - -70 -š‰ime - *= 60; - -73 -š‰ime - *= 60 * 60; - -76 -š‰ime - *= 24 * 60 * 60; - -82  -š‰ime -; - -84 - } -} - -89 - $fÜm©_time - (* -bufăr -, cÚĄ * -Ąršg -) - -91 ià( - `Ąrcmp -( -Ąršg -, "forever") == 0 || - -92 - `Ąrcmp -( -Ąršg -, "-") == 0 || - -93 - `©oi -( -Ąršg -) < 0) - -94 - `Ąręy -( -bufăr -, "forever"); - -95 ià( - `Ąrcmp -( -Ąršg -, "none") == 0 || - -96 - `Ąrcmp -( -Ąršg -, "0") == 0) - -97 - `Ąręy -( -bufăr -, "none"); - -100  -wÜktime -[80+1]; - -101 cÚĄ * -suffix -; - -102 * -fÜm© -; - -103  -št_time -; - -105 -suffix - = -Ąršg - + - `Ąr„n -(string, "0123456789"); - -106 - `Ąșęy -( -wÜktime -, -Ąršg -, -suffix - - string); - -107 -wÜktime -[ -suffix - - -Ąršg -] = '\0'; - -108 -št_time - = - `©oi -( -wÜktime -); - -110 * -suffix -) - -113 -fÜm© - = "%d minute(s)"; - -116 -fÜm© - = "%d hour(s)"; - -119 -fÜm© - = "%d day(s)"; - -124 -fÜm© - = "%d second(s)"; - -128 - `„rštf -( -bufăr -, -fÜm© -, -št_time -); - -131  -bufăr -; - -132 - } -} - -135 - $maybe_Š“p -(cÚĄ * -wa™_time -) - -137  -mes§ge -[80+1]; - -138  -št_wa™_time -; - -140 -št_wa™_time - = - `cÚv”t_time -( -wa™_time -); - -142 ià( -št_wa™_time - > 0) - -144 - `Žštf -("S˕šg fÜ %s\n", - `fÜm©_time -( -mes§ge -, -wa™_time -)); - -145 - `Š“p -( -št_wa™_time -); - -146 } ià( -št_wa™_time - == 0) - -148 - `Žštf -("Sleeping forever...CTRL-Cƒxits\n"); - -150 - `·uŁ -(); - -152 - } -} - -155 - $u§ge -() - -157 - `Žštf -("fmtoȚ fm v”siÚ %s\n\n", -VERSION -); - -158 - `Žštf -("usage: %s [-h] [-o] [-q] [-d ] [-t ] " - -160 -Žogżm_Çme -); - -161 - `Žštf -("A small controller for Video for Linux„adio devices.\n\n"); - -162 - `Žštf -(" -h displayhis help\n"); - -163 - `Žštf -(" -o override frequency„ange†imits of card\n"); - -164 - `Žštf -(" -q quiet mode\n"); - -165 - `Žštf -(" -d select device (default: /dev/radio0)\n"); - -166 - `Žštf -(" -t selectuner (default: 0)\n"); - -167 - `Žštf -(" -T