diff -Nru gtkterm-0.99.7+git9d63182/aclocal.m4 gtkterm-1.0.1/aclocal.m4 --- gtkterm-0.99.7+git9d63182/aclocal.m4 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/aclocal.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,1651 +0,0 @@ -# generated automatically by aclocal 1.15.1 -*- Autoconf -*- - -# Copyright (C) 1996-2017 Free Software Foundation, Inc. - -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, -[m4_warning([this file was generated for autoconf 2.69. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically 'autoreconf'.])]) - - -dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml]) -# serial 42 IT_PROG_INTLTOOL -AC_DEFUN([IT_PROG_INTLTOOL], [ -AC_PREREQ([2.50])dnl -AC_REQUIRE([AM_NLS])dnl - -case "$am__api_version" in - 1.[01234]) - AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) - ;; - *) - ;; -esac - -INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` -INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` -INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` -if test -n "$1"; then - AC_MSG_CHECKING([for intltool >= $1]) - AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) - test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || - AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) -fi - -AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update]) -AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge]) -AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract]) -if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then - AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.]) -fi - -if test -z "$AM_DEFAULT_VERBOSITY"; then - AM_DEFAULT_VERBOSITY=1 -fi -AC_SUBST([AM_DEFAULT_VERBOSITY]) - -INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))' -INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))' -INTLTOOL__v_MERGE_0='@echo " ITMRG " [$]@;' -AC_SUBST(INTLTOOL_V_MERGE) -AC_SUBST(INTLTOOL__v_MERGE_) -AC_SUBST(INTLTOOL__v_MERGE_0) - -INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))' -intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))' -intltool__v_merge_options_0='-q' -AC_SUBST(INTLTOOL_V_MERGE_OPTIONS) -AC_SUBST(intltool__v_merge_options_) -AC_SUBST(intltool__v_merge_options_0) - - INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' -INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< [$]@' - INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' -INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' -if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then - INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< [$]@' -else - INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.[$][$]RANDOM && mkdir [$][$]_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u [$][$]_it_tmp_dir $< [$]@ && rmdir [$][$]_it_tmp_dir' -fi - INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' - -_IT_SUBST(INTLTOOL_DESKTOP_RULE) -_IT_SUBST(INTLTOOL_DIRECTORY_RULE) -_IT_SUBST(INTLTOOL_KEYS_RULE) -_IT_SUBST(INTLTOOL_PROP_RULE) -_IT_SUBST(INTLTOOL_OAF_RULE) -_IT_SUBST(INTLTOOL_PONG_RULE) -_IT_SUBST(INTLTOOL_SERVER_RULE) -_IT_SUBST(INTLTOOL_SHEET_RULE) -_IT_SUBST(INTLTOOL_SOUNDLIST_RULE) -_IT_SUBST(INTLTOOL_UI_RULE) -_IT_SUBST(INTLTOOL_XAM_RULE) -_IT_SUBST(INTLTOOL_KBD_RULE) -_IT_SUBST(INTLTOOL_XML_RULE) -_IT_SUBST(INTLTOOL_XML_NOMERGE_RULE) -_IT_SUBST(INTLTOOL_CAVES_RULE) -_IT_SUBST(INTLTOOL_SCHEMAS_RULE) -_IT_SUBST(INTLTOOL_THEME_RULE) -_IT_SUBST(INTLTOOL_SERVICE_RULE) -_IT_SUBST(INTLTOOL_POLICY_RULE) - -# Check the gettext tools to make sure they are GNU -AC_PATH_PROG(XGETTEXT, xgettext) -AC_PATH_PROG(MSGMERGE, msgmerge) -AC_PATH_PROG(MSGFMT, msgfmt) -AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) -if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then - AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) -fi -xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" -mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" -mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" -if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then - AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) -fi - -AC_PATH_PROG(INTLTOOL_PERL, perl) -if test -z "$INTLTOOL_PERL"; then - AC_MSG_ERROR([perl not found]) -fi -AC_MSG_CHECKING([for perl >= 5.8.1]) -$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 -if test $? -ne 0; then - AC_MSG_ERROR([perl 5.8.1 is required for intltool]) -else - IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"` - AC_MSG_RESULT([$IT_PERL_VERSION]) -fi -if test "x$2" != "xno-xml"; then - AC_MSG_CHECKING([for XML::Parser]) - if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then - AC_MSG_RESULT([ok]) - else - AC_MSG_ERROR([XML::Parser perl module is required for intltool]) - fi -fi - -# Substitute ALL_LINGUAS so we can use it in po/Makefile -AC_SUBST(ALL_LINGUAS) - -IT_PO_SUBDIR([po]) - -]) - - -# IT_PO_SUBDIR(DIRNAME) -# --------------------- -# All po subdirs have to be declared with this macro; the subdir "po" is -# declared by IT_PROG_INTLTOOL. -# -AC_DEFUN([IT_PO_SUBDIR], -[AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. -dnl -dnl The following CONFIG_COMMANDS should be executed at the very end -dnl of config.status. -AC_CONFIG_COMMANDS_PRE([ - AC_CONFIG_COMMANDS([$1/stamp-it], [ - if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" > /dev/null ]; then - AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.]) - fi - rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" - >"$1/stamp-it.tmp" - [sed '/^#/d - s/^[[].*] *// - /^[ ]*$/d - '"s|^| $ac_top_srcdir/|" \ - "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" - ] - [sed '/^POTFILES =/,/[^\\]$/ { - /^POTFILES =/!d - r $1/POTFILES - } - ' "$1/Makefile.in" >"$1/Makefile"] - rm -f "$1/Makefile.tmp" - mv "$1/stamp-it.tmp" "$1/stamp-it" - ]) -])dnl -]) - -# _IT_SUBST(VARIABLE) -# ------------------- -# Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST -# -AC_DEFUN([_IT_SUBST], -[ -AC_SUBST([$1]) -m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) -] -) - -# deprecated macros -AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL]) -# A hint is needed for aclocal from Automake <= 1.9.4: -# AC_DEFUN([AC_PROG_INTLTOOL], ...) - - -# nls.m4 serial 5 (gettext-0.18) -dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014, 2016 Free Software -dnl Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -AC_PREREQ([2.50]) - -AC_DEFUN([AM_NLS], -[ - AC_MSG_CHECKING([whether NLS is requested]) - dnl Default is enabled NLS - AC_ARG_ENABLE([nls], - [ --disable-nls do not use Native Language Support], - USE_NLS=$enableval, USE_NLS=yes) - AC_MSG_RESULT([$USE_NLS]) - AC_SUBST([USE_NLS]) -]) - -dnl pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -dnl serial 11 (pkg-config-0.29) -dnl -dnl Copyright © 2004 Scott James Remnant . -dnl Copyright © 2012-2015 Dan Nicholson -dnl -dnl This program is free software; you can redistribute it and/or modify -dnl it under the terms of the GNU General Public License as published by -dnl the Free Software Foundation; either version 2 of the License, or -dnl (at your option) any later version. -dnl -dnl This program is distributed in the hope that it will be useful, but -dnl WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl General Public License for more details. -dnl -dnl You should have received a copy of the GNU General Public License -dnl along with this program; if not, write to the Free Software -dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -dnl 02111-1307, USA. -dnl -dnl As a special exception to the GNU General Public License, if you -dnl distribute this file as part of a program that contains a -dnl configuration script generated by Autoconf, you may include it under -dnl the same distribution terms that you use for the rest of that -dnl program. - -dnl PKG_PREREQ(MIN-VERSION) -dnl ----------------------- -dnl Since: 0.29 -dnl -dnl Verify that the version of the pkg-config macros are at least -dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's -dnl installed version of pkg-config, this checks the developer's version -dnl of pkg.m4 when generating configure. -dnl -dnl To ensure that this macro is defined, also add: -dnl m4_ifndef([PKG_PREREQ], -dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])]) -dnl -dnl See the "Since" comment for each macro you use to see what version -dnl of the macros you require. -m4_defun([PKG_PREREQ], -[m4_define([PKG_MACROS_VERSION], [0.29]) -m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, - [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) -])dnl PKG_PREREQ - -dnl PKG_PROG_PKG_CONFIG([MIN-VERSION]) -dnl ---------------------------------- -dnl Since: 0.16 -dnl -dnl Search for the pkg-config tool and set the PKG_CONFIG variable to -dnl first found in the path. Checks that the version of pkg-config found -dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is -dnl used since that's the first version where most current features of -dnl pkg-config existed. -AC_DEFUN([PKG_PROG_PKG_CONFIG], -[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) -m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) -m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) -AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) -AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) -AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=m4_default([$1], [0.9.0]) - AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - PKG_CONFIG="" - fi -fi[]dnl -])dnl PKG_PROG_PKG_CONFIG - -dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -dnl ------------------------------------------------------------------- -dnl Since: 0.18 -dnl -dnl Check to see whether a particular set of modules exists. Similar to -dnl PKG_CHECK_MODULES(), but does not set variables or print errors. -dnl -dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -dnl only at the first occurence in configure.ac, so if the first place -dnl it's called might be skipped (such as if it is within an "if", you -dnl have to call PKG_CHECK_EXISTS manually -AC_DEFUN([PKG_CHECK_EXISTS], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -if test -n "$PKG_CONFIG" && \ - AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then - m4_default([$2], [:]) -m4_ifvaln([$3], [else - $3])dnl -fi]) - -dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -dnl --------------------------------------------- -dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting -dnl pkg_failed based on the result. -m4_define([_PKG_CONFIG], -[if test -n "$$1"; then - pkg_cv_[]$1="$$1" - elif test -n "$PKG_CONFIG"; then - PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes ], - [pkg_failed=yes]) - else - pkg_failed=untried -fi[]dnl -])dnl _PKG_CONFIG - -dnl _PKG_SHORT_ERRORS_SUPPORTED -dnl --------------------------- -dnl Internal check to see if pkg-config supports short errors. -AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi[]dnl -])dnl _PKG_SHORT_ERRORS_SUPPORTED - - -dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -dnl [ACTION-IF-NOT-FOUND]) -dnl -------------------------------------------------------------- -dnl Since: 0.4.0 -dnl -dnl Note that if there is a possibility the first call to -dnl PKG_CHECK_MODULES might not happen, you should be sure to include an -dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -AC_DEFUN([PKG_CHECK_MODULES], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl -AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl - -pkg_failed=no -AC_MSG_CHECKING([for $1]) - -_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) -_PKG_CONFIG([$1][_LIBS], [libs], [$2]) - -m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS -and $1[]_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details.]) - -if test $pkg_failed = yes; then - AC_MSG_RESULT([no]) - _PKG_SHORT_ERRORS_SUPPORTED - if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` - else - $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD - - m4_default([$4], [AC_MSG_ERROR( -[Package requirements ($2) were not met: - -$$1_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -_PKG_TEXT])[]dnl - ]) -elif test $pkg_failed = untried; then - AC_MSG_RESULT([no]) - m4_default([$4], [AC_MSG_FAILURE( -[The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -_PKG_TEXT - -To get pkg-config, see .])[]dnl - ]) -else - $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS - $1[]_LIBS=$pkg_cv_[]$1[]_LIBS - AC_MSG_RESULT([yes]) - $3 -fi[]dnl -])dnl PKG_CHECK_MODULES - - -dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -dnl [ACTION-IF-NOT-FOUND]) -dnl --------------------------------------------------------------------- -dnl Since: 0.29 -dnl -dnl Checks for existence of MODULES and gathers its build flags with -dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags -dnl and VARIABLE-PREFIX_LIBS from --libs. -dnl -dnl Note that if there is a possibility the first call to -dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to -dnl include an explicit call to PKG_PROG_PKG_CONFIG in your -dnl configure.ac. -AC_DEFUN([PKG_CHECK_MODULES_STATIC], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -_save_PKG_CONFIG=$PKG_CONFIG -PKG_CONFIG="$PKG_CONFIG --static" -PKG_CHECK_MODULES($@) -PKG_CONFIG=$_save_PKG_CONFIG[]dnl -])dnl PKG_CHECK_MODULES_STATIC - - -dnl PKG_INSTALLDIR([DIRECTORY]) -dnl ------------------------- -dnl Since: 0.27 -dnl -dnl Substitutes the variable pkgconfigdir as the location where a module -dnl should install pkg-config .pc files. By default the directory is -dnl $libdir/pkgconfig, but the default can be changed by passing -dnl DIRECTORY. The user can override through the --with-pkgconfigdir -dnl parameter. -AC_DEFUN([PKG_INSTALLDIR], -[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) -m4_pushdef([pkg_description], - [pkg-config installation directory @<:@]pkg_default[@:>@]) -AC_ARG_WITH([pkgconfigdir], - [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],, - [with_pkgconfigdir=]pkg_default) -AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) -m4_popdef([pkg_default]) -m4_popdef([pkg_description]) -])dnl PKG_INSTALLDIR - - -dnl PKG_NOARCH_INSTALLDIR([DIRECTORY]) -dnl -------------------------------- -dnl Since: 0.27 -dnl -dnl Substitutes the variable noarch_pkgconfigdir as the location where a -dnl module should install arch-independent pkg-config .pc files. By -dnl default the directory is $datadir/pkgconfig, but the default can be -dnl changed by passing DIRECTORY. The user can override through the -dnl --with-noarch-pkgconfigdir parameter. -AC_DEFUN([PKG_NOARCH_INSTALLDIR], -[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) -m4_pushdef([pkg_description], - [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@]) -AC_ARG_WITH([noarch-pkgconfigdir], - [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],, - [with_noarch_pkgconfigdir=]pkg_default) -AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) -m4_popdef([pkg_default]) -m4_popdef([pkg_description]) -])dnl PKG_NOARCH_INSTALLDIR - - -dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, -dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -dnl ------------------------------------------- -dnl Since: 0.28 -dnl -dnl Retrieves the value of the pkg-config variable for the given module. -AC_DEFUN([PKG_CHECK_VAR], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl - -_PKG_CONFIG([$1], [variable="][$3]["], [$2]) -AS_VAR_COPY([$1], [pkg_cv_][$1]) - -AS_VAR_IF([$1], [""], [$5], [$4])dnl -])dnl PKG_CHECK_VAR - -# Copyright (C) 2002-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.15' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.15.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.15.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to -# '$srcdir', '$srcdir/..', or '$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is '.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl -# Expand $ac_aux_dir to an absolute path. -am_aux_dir=`cd "$ac_aux_dir" && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ([2.52])dnl - m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], - [$1], [CXX], [depcc="$CXX" am_compiler_list=], - [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], - [$1], [UPC], [depcc="$UPC" am_compiler_list=], - [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES. -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE([dependency-tracking], [dnl -AS_HELP_STRING( - [--enable-dependency-tracking], - [do not reject slow dependency extractors]) -AS_HELP_STRING( - [--disable-dependency-tracking], - [speeds up one-time build])]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -AC_SUBST([am__nodep])dnl -_AM_SUBST_NOTMAKE([am__nodep])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[{ - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each '.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. -m4_define([AC_PROG_CC], -m4_defn([AC_PROG_CC]) -[_AM_PROG_CC_C_O -]) - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.65])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[AC_DIAGNOSE([obsolete], - [$0: two- and three-arguments forms are deprecated.]) -m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if( - m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), - [ok:ok],, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) - AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) -AM_MISSING_PROG([AUTOCONF], [autoconf]) -AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) -AM_MISSING_PROG([AUTOHEADER], [autoheader]) -AM_MISSING_PROG([MAKEINFO], [makeinfo]) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target (and possibly the TAP driver). The -# system "awk" is bad on some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES([CC])], - [m4_define([AC_PROG_CC], - m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES([CXX])], - [m4_define([AC_PROG_CXX], - m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES([OBJC])], - [m4_define([AC_PROG_OBJC], - m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], - [_AM_DEPENDENCIES([OBJCXX])], - [m4_define([AC_PROG_OBJCXX], - m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl -]) -AC_REQUIRE([AM_SILENT_RULES])dnl -dnl The testsuite driver may need to know about EXEEXT, so add the -dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This -dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) - fi -fi -dnl The trailing newline in this macro's definition is deliberate, for -dnl backward compatibility and to allow trailing 'dnl'-style comments -dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. -]) - -dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -dnl mangled by Autoconf and run in a shell conditional statement. -m4_define([_AC_COMPILER_EXEEXT], -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST([install_sh])]) - -# Copyright (C) 2003-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it is modern enough. -# If it is, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - AC_MSG_WARN(['missing' script is too old or missing]) -fi -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# -------------------- -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) - -# _AM_SET_OPTIONS(OPTIONS) -# ------------------------ -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Copyright (C) 1999-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_CC_C_O -# --------------- -# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC -# to automatically call this. -AC_DEFUN([_AM_PROG_CC_C_O], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([compile])dnl -AC_LANG_PUSH([C])dnl -AC_CACHE_CHECK( - [whether $CC understands -c and -o together], - [am_cv_prog_cc_c_o], - [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i]) -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -AC_LANG_POP([C])]) - -# For backward compatibility. -AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_RUN_LOG(COMMAND) -# ------------------- -# Run COMMAND, save the exit status in ac_status, and log it. -# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) -AC_DEFUN([AM_RUN_LOG], -[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD - ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - (exit $ac_status); }]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken - alias in your environment]) - fi - if test "$[2]" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT([yes]) -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi -AC_CONFIG_COMMANDS_PRE( - [AC_MSG_CHECKING([that generated files are newer than configure]) - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - AC_MSG_RESULT([done])]) -rm -f conftest.file -]) - -# Copyright (C) 2009-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# ("yes" being less verbose, "no" or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], [dnl -AS_HELP_STRING( - [--enable-silent-rules], - [less verbose build output (undo: "make V=1")]) -AS_HELP_STRING( - [--disable-silent-rules], - [verbose build output (undo: "make V=0")])dnl -]) -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -dnl -dnl A few 'make' implementations (e.g., NonStop OS and NextStep) -dnl do not support nested variable expansions. -dnl See automake bug#9928 and bug#10237. -am_make=${MAKE-make} -AC_CACHE_CHECK([whether $am_make supports nested variables], - [am_cv_make_support_nested_variables], - [if AS_ECHO([['TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi]) -if test $am_cv_make_support_nested_variables = yes; then - dnl Using '$V' instead of '$(V)' breaks IRIX make. - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AC_SUBST([AM_V])dnl -AM_SUBST_NOTMAKE([AM_V])dnl -AC_SUBST([AM_DEFAULT_V])dnl -AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) - -# Copyright (C) 2001-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor 'install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in "make install-strip", and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# AM_SUBST_NOTMAKE(VARIABLE) -# -------------------------- -# Public sister of _AM_SUBST_NOTMAKE. -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004-2017 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of 'v7', 'ustar', or 'pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -# -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AC_SUBST([AMTAR], ['$${TAR-tar}']) - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' - -m4_if([$1], [v7], - [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - - [m4_case([$1], - [ustar], - [# The POSIX 1988 'ustar' format is defined with fixed-size fields. - # There is notably a 21 bits limit for the UID and the GID. In fact, - # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 - # and bug#13588). - am_max_uid=2097151 # 2^21 - 1 - am_max_gid=$am_max_uid - # The $UID and $GID variables are not portable, so we need to resort - # to the POSIX-mandated id(1) utility. Errors in the 'id' calls - # below are definitely unexpected, so allow the users to see them - # (that is, avoid stderr redirection). - am_uid=`id -u || echo unknown` - am_gid=`id -g || echo unknown` - AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) - if test $am_uid -le $am_max_uid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi - AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) - if test $am_gid -le $am_max_gid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi], - - [pax], - [], - - [m4_fatal([Unknown tar format])]) - - AC_MSG_CHECKING([how to create a $1 tar archive]) - - # Go ahead even if we have the value already cached. We do so because we - # need to set the values for the 'am__tar' and 'am__untar' variables. - _am_tools=${am_cv_prog_tar_$1-$_am_tools} - - for _am_tool in $_am_tools; do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works. - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi - done - rm -rf conftest.dir - - AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) - AC_MSG_RESULT([$am_cv_prog_tar_$1])]) - -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - diff -Nru gtkterm-0.99.7+git9d63182/AUTHORS gtkterm-1.0.1/AUTHORS --- gtkterm-0.99.7+git9d63182/AUTHORS 2017-11-17 16:09:56.000000000 +0000 +++ gtkterm-1.0.1/AUTHORS 1970-01-01 00:00:00.000000000 +0000 @@ -1,3 +0,0 @@ -Julien Schmitt - -Zach Davis diff -Nru gtkterm-0.99.7+git9d63182/autogen.sh gtkterm-1.0.1/autogen.sh --- gtkterm-0.99.7+git9d63182/autogen.sh 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/autogen.sh 1970-01-01 00:00:00.000000000 +0000 @@ -1,22 +0,0 @@ -#!/bin/sh -# Run this to generate all the initial makefiles, etc. - -topdir=`dirname $0` -test -z "$topdir" && topdir=. - -PKG_NAME="GtkTerm" - -(test -f $topdir/src/gtkterm.c) || { - echo -n "**Error**: Directory "\`$topdir\'" does not look like the" - echo " top-level $PKG_NAME directory" - exit 1 -} - -# Check for gnome-autogen.sh existance -which gnome-autogen.sh || { - echo "You need to install gnome-common from GNOME Git (or from" - echo "your OS vendor's package manager)." - exit 1 -} - -USE_GNOME3_MACROS=1 . gnome-autogen.sh diff -Nru gtkterm-0.99.7+git9d63182/ChangeLog gtkterm-1.0.1/ChangeLog --- gtkterm-0.99.7+git9d63182/ChangeLog 2017-11-17 16:09:56.000000000 +0000 +++ gtkterm-1.0.1/ChangeLog 1970-01-01 00:00:00.000000000 +0000 @@ -1,93 +0,0 @@ -2010-11-10 gettextize - - * Released gtkterm 0.99.7 **-&&&-2011 - Added software support for RS485 - see README (thanks to Marc Le Douarain) - Updated many of the GTK widgets - Cleaned up auto-crlf stuff - Overhauled build system - Support for arbitrary baud rates - Added logging functionality (thanks to Brian Beattie) - Many many bugfixes - - * Released gtkterm 0.99.6 16-aug-2010 - Maintainership changed to https://fedorahosted.org/released/gtkterm - Bugfixes : - Several code cleanup changes - Fixed sendhex methods - Additions : - Made CR/LF configurable - Added scrollback and scrollbar capabilities - - * Released gtkterm 0.99.5 13-nov-2005 - Bugfixes version : - Backspace key now works and sends \b (thanks to Sebastien Bacher) - Print all messages in UTF8 format (thanks to Bús József) - Fixed segfault in case of local buffer overflow (thanks to Brett Foster) - Added hungarian translation (thanks to Bús József) - Allow user to change the port manually to an unlisted port device - - * Released gtkterm 0.99.4 06-sep-2003 - New version with VTE widget - New CR/LF Auto fonctionality - Many hacks from Seb (sebastien.bacher@laposte.net) - - * Released gtkterm 0.99.2 09-mar-2003 - Changed all source files for internationalisation - New i18n.* source files to print UTF-8 strings in all terminals - First translation in French - Moved from automake 1.4 to 1.6 (needed for gettext) - - * Released gtkterm 0.99.1 21-feb-2003 - If no serial port is found in /dev, display an error box - Possible segfault fixed in port configuration window - - * Released gtkterm 0.99.0 16-feb-2003 - gtkterm now behaves more like a real ASCII terminal (SUPPR and - \b are OK. - new "macros" functionality - fixed major bug (memory management in config file) - - * Released gtkterm 0.98.6 13-feb-2003 - bugfixes - possible to send breaks - - * Released gtkterm 0.98.5 05-feb-2003 - nice icons in the menu - new hexadecimal separator : space - font saved in the configuration - lots of bugfixes !! - - * Released gtkterm 0.98.4 11-jan-2003 - hexadecimal display - possibility to send hexadecimal raw data - - * Released gtkterm 0.98.3 07-jan-2003 - configuration file ~/.gtktermrc - CRLF bug fixed - - * Released gtkterm 0.98.2 14-oct-2002 - local echo in configuration menu and in command line - manpage from Debian maintainer Sebastien Bacher added to source tree - few bugfixes - - * Released gtkterm 0.98 - moved to GTK+ 2.0 - command line options - bug fixes - faster file transfer - - * Released gtkterm 0.97 - control signals control - - * Released gtkterm 0.96 - Wait for a special char after CR is now working !! - - * Released gtkterm 0.95 - CR delay is now working !! - many bug fixes - - * Released gtkterm 0.91 - bug fixes - - * Released gtkterm 0.9 - first working release diff -Nru gtkterm-0.99.7+git9d63182/.circleci/config.yml gtkterm-1.0.1/.circleci/config.yml --- gtkterm-0.99.7+git9d63182/.circleci/config.yml 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/.circleci/config.yml 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,20 @@ +version: 2 +jobs: + build: + docker: + - image: debian:buster + steps: + - checkout + - run: + name: Installdeps + command: apt update && apt install -y build-essential meson libgtk-3-dev libvte-2.91-dev gettext libgudev-1.0-dev + - run: + name: Configure + command: meson build + - run: + name: Build + command: ninja -C build + - run: + name: Install + command: ninja -C build install + diff -Nru gtkterm-0.99.7+git9d63182/compile gtkterm-1.0.1/compile --- gtkterm-0.99.7+git9d63182/compile 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/compile 1970-01-01 00:00:00.000000000 +0000 @@ -1,347 +0,0 @@ -#! /bin/sh -# Wrapper for compilers which do not understand '-c -o'. - -scriptversion=2012-10-14.11; # UTC - -# Copyright (C) 1999-2014 Free Software Foundation, Inc. -# Written by Tom Tromey . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# This file is maintained in Automake, please report -# bugs to or send patches to -# . - -nl=' -' - -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent tools from complaining about whitespace usage. -IFS=" "" $nl" - -file_conv= - -# func_file_conv build_file lazy -# Convert a $build file to $host form and store it in $file -# Currently only supports Windows hosts. If the determined conversion -# type is listed in (the comma separated) LAZY, no conversion will -# take place. -func_file_conv () -{ - file=$1 - case $file in - / | /[!/]*) # absolute file, and not a UNC file - if test -z "$file_conv"; then - # lazily determine how to convert abs files - case `uname -s` in - MINGW*) - file_conv=mingw - ;; - CYGWIN*) - file_conv=cygwin - ;; - *) - file_conv=wine - ;; - esac - fi - case $file_conv/,$2, in - *,$file_conv,*) - ;; - mingw/*) - file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` - ;; - cygwin/*) - file=`cygpath -m "$file" || echo "$file"` - ;; - wine/*) - file=`winepath -w "$file" || echo "$file"` - ;; - esac - ;; - esac -} - -# func_cl_dashL linkdir -# Make cl look for libraries in LINKDIR -func_cl_dashL () -{ - func_file_conv "$1" - if test -z "$lib_path"; then - lib_path=$file - else - lib_path="$lib_path;$file" - fi - linker_opts="$linker_opts -LIBPATH:$file" -} - -# func_cl_dashl library -# Do a library search-path lookup for cl -func_cl_dashl () -{ - lib=$1 - found=no - save_IFS=$IFS - IFS=';' - for dir in $lib_path $LIB - do - IFS=$save_IFS - if $shared && test -f "$dir/$lib.dll.lib"; then - found=yes - lib=$dir/$lib.dll.lib - break - fi - if test -f "$dir/$lib.lib"; then - found=yes - lib=$dir/$lib.lib - break - fi - if test -f "$dir/lib$lib.a"; then - found=yes - lib=$dir/lib$lib.a - break - fi - done - IFS=$save_IFS - - if test "$found" != yes; then - lib=$lib.lib - fi -} - -# func_cl_wrapper cl arg... -# Adjust compile command to suit cl -func_cl_wrapper () -{ - # Assume a capable shell - lib_path= - shared=: - linker_opts= - for arg - do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - eat=1 - case $2 in - *.o | *.[oO][bB][jJ]) - func_file_conv "$2" - set x "$@" -Fo"$file" - shift - ;; - *) - func_file_conv "$2" - set x "$@" -Fe"$file" - shift - ;; - esac - ;; - -I) - eat=1 - func_file_conv "$2" mingw - set x "$@" -I"$file" - shift - ;; - -I*) - func_file_conv "${1#-I}" mingw - set x "$@" -I"$file" - shift - ;; - -l) - eat=1 - func_cl_dashl "$2" - set x "$@" "$lib" - shift - ;; - -l*) - func_cl_dashl "${1#-l}" - set x "$@" "$lib" - shift - ;; - -L) - eat=1 - func_cl_dashL "$2" - ;; - -L*) - func_cl_dashL "${1#-L}" - ;; - -static) - shared=false - ;; - -Wl,*) - arg=${1#-Wl,} - save_ifs="$IFS"; IFS=',' - for flag in $arg; do - IFS="$save_ifs" - linker_opts="$linker_opts $flag" - done - IFS="$save_ifs" - ;; - -Xlinker) - eat=1 - linker_opts="$linker_opts $2" - ;; - -*) - set x "$@" "$1" - shift - ;; - *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) - func_file_conv "$1" - set x "$@" -Tp"$file" - shift - ;; - *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) - func_file_conv "$1" mingw - set x "$@" "$file" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift - done - if test -n "$linker_opts"; then - linker_opts="-link$linker_opts" - fi - exec "$@" $linker_opts - exit 1 -} - -eat= - -case $1 in - '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: compile [--help] [--version] PROGRAM [ARGS] - -Wrapper for compilers which do not understand '-c -o'. -Remove '-o dest.o' from ARGS, run PROGRAM with the remaining -arguments, and rename the output as expected. - -If you are trying to build a whole package this is not the -right script to run: please start by reading the file 'INSTALL'. - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "compile $scriptversion" - exit $? - ;; - cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) - func_cl_wrapper "$@" # Doesn't return... - ;; -esac - -ofile= -cfile= - -for arg -do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - # So we strip '-o arg' only if arg is an object. - eat=1 - case $2 in - *.o | *.obj) - ofile=$2 - ;; - *) - set x "$@" -o "$2" - shift - ;; - esac - ;; - *.c) - cfile=$1 - set x "$@" "$1" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift -done - -if test -z "$ofile" || test -z "$cfile"; then - # If no '-o' option was seen then we might have been invoked from a - # pattern rule where we don't need one. That is ok -- this is a - # normal compilation that the losing compiler can handle. If no - # '.c' file was seen then we are probably linking. That is also - # ok. - exec "$@" -fi - -# Name of file we expect compiler to create. -cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` - -# Create the lock directory. -# Note: use '[/\\:.-]' here to ensure that we don't use the same name -# that we are using for the .o file. Also, base the name on the expected -# object file name, since that is what matters with a parallel build. -lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d -while true; do - if mkdir "$lockdir" >/dev/null 2>&1; then - break - fi - sleep 1 -done -# FIXME: race condition here if user kills between mkdir and trap. -trap "rmdir '$lockdir'; exit 1" 1 2 15 - -# Run the compile. -"$@" -ret=$? - -if test -f "$cofile"; then - test "$cofile" = "$ofile" || mv "$cofile" "$ofile" -elif test -f "${cofile}bj"; then - test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" -fi - -rmdir "$lockdir" -exit $ret - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru gtkterm-0.99.7+git9d63182/config.h.in gtkterm-1.0.1/config.h.in --- gtkterm-0.99.7+git9d63182/config.h.in 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/config.h.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,61 +0,0 @@ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* GETTEXT package name */ -#undef GETTEXT_PACKAGE - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_LINUX_SERIAL_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Version number of package */ -#undef VERSION diff -Nru gtkterm-0.99.7+git9d63182/configure gtkterm-1.0.1/configure --- gtkterm-0.99.7+git9d63182/configure 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/configure 1970-01-01 00:00:00.000000000 +0000 @@ -1,6513 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for GtkTerm 1.0. -# -# Report bugs to . -# -# -# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Use a proper internal environment variable to ensure we don't fall - # into an infinite loop, continuously re-executing ourselves. - if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then - _as_can_reexec=no; export _as_can_reexec; - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -as_fn_exit 255 - fi - # We don't want this to propagate to other subprocesses. - { _as_can_reexec=; unset _as_can_reexec;} -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1 -test -x / || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - export CONFIG_SHELL - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -exit 255 -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: https://github.com/Jeija/gtkterm about your system, -$0: including any error possibly output before this -$0: message. Then install a modern shell, or manually run -$0: the script under such a shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # If we had to re-execute with $CONFIG_SHELL, we're ensured to have - # already done that, so ensure we don't try to do so again and fall - # in an infinite loop. This has already happened in practice. - _as_can_reexec=no; export _as_can_reexec - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='GtkTerm' -PACKAGE_TARNAME='gtkterm' -PACKAGE_VERSION='1.0' -PACKAGE_STRING='GtkTerm 1.0' -PACKAGE_BUGREPORT='https://github.com/Jeija/gtkterm' -PACKAGE_URL='' - -ac_header_list= -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIBOBJS -EGREP -GREP -CPP -GLIB_COMPILE_RESOURCES -GNUCFLAGS -vte_LIBS -vte_CFLAGS -gtk_LIBS -gtk_CFLAGS -PKG_CONFIG_LIBDIR -PKG_CONFIG_PATH -PKG_CONFIG -ALL_LINGUAS -INTLTOOL_PERL -GMSGFMT -MSGFMT -MSGMERGE -XGETTEXT -INTLTOOL_POLICY_RULE -INTLTOOL_SERVICE_RULE -INTLTOOL_THEME_RULE -INTLTOOL_SCHEMAS_RULE -INTLTOOL_CAVES_RULE -INTLTOOL_XML_NOMERGE_RULE -INTLTOOL_XML_RULE -INTLTOOL_KBD_RULE -INTLTOOL_XAM_RULE -INTLTOOL_UI_RULE -INTLTOOL_SOUNDLIST_RULE -INTLTOOL_SHEET_RULE -INTLTOOL_SERVER_RULE -INTLTOOL_PONG_RULE -INTLTOOL_OAF_RULE -INTLTOOL_PROP_RULE -INTLTOOL_KEYS_RULE -INTLTOOL_DIRECTORY_RULE -INTLTOOL_DESKTOP_RULE -intltool__v_merge_options_0 -intltool__v_merge_options_ -INTLTOOL_V_MERGE_OPTIONS -INTLTOOL__v_MERGE_0 -INTLTOOL__v_MERGE_ -INTLTOOL_V_MERGE -INTLTOOL_EXTRACT -INTLTOOL_MERGE -INTLTOOL_UPDATE -USE_NLS -GETTEXT_PACKAGE -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -am__nodep -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -AM_DEFAULT_V -AM_V -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -runstatedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_silent_rules -enable_dependency_tracking -enable_nls -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -PKG_CONFIG -PKG_CONFIG_PATH -PKG_CONFIG_LIBDIR -gtk_CFLAGS -gtk_LIBS -vte_CFLAGS -vte_LIBS -CPP' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -runstatedir='${localstatedir}/run' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -runstatedir | --runstatedir | --runstatedi | --runstated \ - | --runstate | --runstat | --runsta | --runst | --runs \ - | --run | --ru | --r) - ac_prev=runstatedir ;; - -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ - | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ - | --run=* | --ru=* | --r=*) - runstatedir=$ac_optarg ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir runstatedir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures GtkTerm 1.0 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/gtkterm] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of GtkTerm 1.0:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-silent-rules less verbose build output (undo: "make V=1") - --disable-silent-rules verbose build output (undo: "make V=0") - --enable-dependency-tracking - do not reject slow dependency extractors - --disable-dependency-tracking - speeds up one-time build - --disable-nls do not use Native Language Support - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - PKG_CONFIG path to pkg-config utility - PKG_CONFIG_PATH - directories to add to pkg-config's search path - PKG_CONFIG_LIBDIR - path overriding pkg-config's built-in search path - gtk_CFLAGS C compiler flags for gtk, overriding pkg-config - gtk_LIBS linker flags for gtk, overriding pkg-config - vte_CFLAGS C compiler flags for vte, overriding pkg-config - vte_LIBS linker flags for vte, overriding pkg-config - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -GtkTerm configure 1.0 -generated by GNU Autoconf 2.69 - -Copyright (C) 2012 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by GtkTerm $as_me 1.0, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -as_fn_append ac_header_list " linux/serial.h" -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -am__api_version='1.15' - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken - alias in your environment" "$LINENO" 5 - fi - if test "$2" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi - -rm -f conftest.file - -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# Expand $ac_aux_dir to an absolute path. -am_aux_dir=`cd "$ac_aux_dir" && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=1;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='gtkterm' - VERSION='1.0' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -mkdir_p='$(MKDIR_P)' - -# We need awk for the "check" target (and possibly the TAP driver). The -# system "awk" is bad on some platforms. -# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AMTAR='$${TAR-tar}' - - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar pax cpio none' - -am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' - - - - - - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 - fi -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 -$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } -if ${am_cv_prog_cc_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 - ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 -$as_echo "$am_cv_prog_cc_c_o" >&6; } -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - -ac_config_headers="$ac_config_headers config.h" - - -GETTEXT_PACKAGE="gtkterm" - - -cat >>confdefs.h <<_ACEOF -#define GETTEXT_PACKAGE "$GETTEXT_PACKAGE" -_ACEOF - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 -$as_echo_n "checking whether NLS is requested... " >&6; } - # Check whether --enable-nls was given. -if test "${enable_nls+set}" = set; then : - enableval=$enable_nls; USE_NLS=$enableval -else - USE_NLS=yes -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 -$as_echo "$USE_NLS" >&6; } - - - - -case "$am__api_version" in - 1.01234) - as_fn_error $? "Automake 1.5 or newer is required to use intltool" "$LINENO" 5 - ;; - *) - ;; -esac - -INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.40.0 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` -INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` -INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` -if test -n "0.40.0"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= 0.40.0" >&5 -$as_echo_n "checking for intltool >= 0.40.0... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5 -$as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } - test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || - as_fn_error $? "Your intltool is too old. You need intltool 0.40.0 or later." "$LINENO" 5 -fi - -# Extract the first word of "intltool-update", so it can be a program name with args. -set dummy intltool-update; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_UPDATE+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $INTLTOOL_UPDATE in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE -if test -n "$INTLTOOL_UPDATE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5 -$as_echo "$INTLTOOL_UPDATE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "intltool-merge", so it can be a program name with args. -set dummy intltool-merge; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_MERGE+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $INTLTOOL_MERGE in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE -if test -n "$INTLTOOL_MERGE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5 -$as_echo "$INTLTOOL_MERGE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "intltool-extract", so it can be a program name with args. -set dummy intltool-extract; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_EXTRACT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $INTLTOOL_EXTRACT in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT -if test -n "$INTLTOOL_EXTRACT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5 -$as_echo "$INTLTOOL_EXTRACT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then - as_fn_error $? "The intltool scripts were not found. Please install intltool." "$LINENO" 5 -fi - -if test -z "$AM_DEFAULT_VERBOSITY"; then - AM_DEFAULT_VERBOSITY=1 -fi - - -INTLTOOL_V_MERGE='$(INTLTOOL__v_MERGE_$(V))' -INTLTOOL__v_MERGE_='$(INTLTOOL__v_MERGE_$(AM_DEFAULT_VERBOSITY))' -INTLTOOL__v_MERGE_0='@echo " ITMRG " $@;' - - - - -INTLTOOL_V_MERGE_OPTIONS='$(intltool__v_merge_options_$(V))' -intltool__v_merge_options_='$(intltool__v_merge_options_$(AM_DEFAULT_VERBOSITY))' -intltool__v_merge_options_0='-q' - - - - - INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' -INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -p $(top_srcdir)/po $< $@' - INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' -INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' -if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge 5000; then - INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u --no-translations $< $@' -else - INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; $(INTLTOOL_V_MERGE)_it_tmp_dir=tmp.intltool.$$RANDOM && mkdir $$_it_tmp_dir && LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u $$_it_tmp_dir $< $@ && rmdir $$_it_tmp_dir' -fi - INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(INTLTOOL_V_MERGE)LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# Check the gettext tools to make sure they are GNU -# Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_XGETTEXT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $XGETTEXT in - [\\/]* | ?:[\\/]*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -XGETTEXT=$ac_cv_path_XGETTEXT -if test -n "$XGETTEXT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 -$as_echo "$XGETTEXT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "msgmerge", so it can be a program name with args. -set dummy msgmerge; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGMERGE+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MSGMERGE in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -MSGMERGE=$ac_cv_path_MSGMERGE -if test -n "$MSGMERGE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 -$as_echo "$MSGMERGE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGFMT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -MSGFMT=$ac_cv_path_MSGFMT -if test -n "$MSGFMT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 -$as_echo "$MSGFMT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GMSGFMT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac -fi -GMSGFMT=$ac_cv_path_GMSGFMT -if test -n "$GMSGFMT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 -$as_echo "$GMSGFMT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then - as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 -fi -xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" -mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" -mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" -if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then - as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 -fi - -# Extract the first word of "perl", so it can be a program name with args. -set dummy perl; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_PERL+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $INTLTOOL_PERL in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL -if test -n "$INTLTOOL_PERL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5 -$as_echo "$INTLTOOL_PERL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test -z "$INTLTOOL_PERL"; then - as_fn_error $? "perl not found" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5 -$as_echo_n "checking for perl >= 5.8.1... " >&6; } -$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 -if test $? -ne 0; then - as_fn_error $? "perl 5.8.1 is required for intltool" "$LINENO" 5 -else - IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"` - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5 -$as_echo "$IT_PERL_VERSION" >&6; } -fi -if test "x" != "xno-xml"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5 -$as_echo_n "checking for XML::Parser... " >&6; } - if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } - else - as_fn_error $? "XML::Parser perl module is required for intltool" "$LINENO" 5 - fi -fi - -# Substitute ALL_LINGUAS so we can use it in po/Makefile - - - - - -AM_GLIB_GNU_GETTEXT - -# Use AM_SILENT_RULES if present -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=0;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - - - - - - - - - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. -set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -PKG_CONFIG=$ac_cv_path_PKG_CONFIG -if test -n "$PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 -$as_echo "$PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_path_PKG_CONFIG"; then - ac_pt_PKG_CONFIG=$PKG_CONFIG - # Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $ac_pt_PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG -if test -n "$ac_pt_PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 -$as_echo "$ac_pt_PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_pt_PKG_CONFIG" = x; then - PKG_CONFIG="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - PKG_CONFIG=$ac_pt_PKG_CONFIG - fi -else - PKG_CONFIG="$ac_cv_path_PKG_CONFIG" -fi - -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=0.9.0 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 -$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - PKG_CONFIG="" - fi -fi - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gtk" >&5 -$as_echo_n "checking for gtk... " >&6; } - -if test -n "$gtk_CFLAGS"; then - pkg_cv_gtk_CFLAGS="$gtk_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0 >= 3.12.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "gtk+-3.0 >= 3.12.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_gtk_CFLAGS=`$PKG_CONFIG --cflags "gtk+-3.0 >= 3.12.0" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$gtk_LIBS"; then - pkg_cv_gtk_LIBS="$gtk_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0 >= 3.12.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "gtk+-3.0 >= 3.12.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_gtk_LIBS=`$PKG_CONFIG --libs "gtk+-3.0 >= 3.12.0" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - gtk_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gtk+-3.0 >= 3.12.0" 2>&1` - else - gtk_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gtk+-3.0 >= 3.12.0" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$gtk_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements (gtk+-3.0 >= 3.12.0) were not met: - -$gtk_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables gtk_CFLAGS -and gtk_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables gtk_CFLAGS -and gtk_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details" "$LINENO" 5; } -else - gtk_CFLAGS=$pkg_cv_gtk_CFLAGS - gtk_LIBS=$pkg_cv_gtk_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for vte" >&5 -$as_echo_n "checking for vte... " >&6; } - -if test -n "$vte_CFLAGS"; then - pkg_cv_vte_CFLAGS="$vte_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"vte-2.91 >= 0.40.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "vte-2.91 >= 0.40.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_vte_CFLAGS=`$PKG_CONFIG --cflags "vte-2.91 >= 0.40.0" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$vte_LIBS"; then - pkg_cv_vte_LIBS="$vte_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"vte-2.91 >= 0.40.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "vte-2.91 >= 0.40.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_vte_LIBS=`$PKG_CONFIG --libs "vte-2.91 >= 0.40.0" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - vte_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "vte-2.91 >= 0.40.0" 2>&1` - else - vte_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "vte-2.91 >= 0.40.0" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$vte_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements (vte-2.91 >= 0.40.0) were not met: - -$vte_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables vte_CFLAGS -and vte_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables vte_CFLAGS -and vte_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details" "$LINENO" 5; } -else - vte_CFLAGS=$pkg_cv_vte_CFLAGS - vte_LIBS=$pkg_cv_vte_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - -if test "$CC" = "gcc" ; then - GNUCFLAGS="-Wall -fno-omit-frame-pointer -fno-strict-aliasing -O2" -fi - - -# Bundle GTK ui files with gresource -# Extract the first word of "glib-compile-resources", so it can be a program name with args. -set dummy glib-compile-resources; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GLIB_COMPILE_RESOURCES+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GLIB_COMPILE_RESOURCES in - [\\/]* | ?:[\\/]*) - ac_cv_path_GLIB_COMPILE_RESOURCES="$GLIB_COMPILE_RESOURCES" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GLIB_COMPILE_RESOURCES="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GLIB_COMPILE_RESOURCES" && ac_cv_path_GLIB_COMPILE_RESOURCES="no" - ;; -esac -fi -GLIB_COMPILE_RESOURCES=$ac_cv_path_GLIB_COMPILE_RESOURCES -if test -n "$GLIB_COMPILE_RESOURCES"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_COMPILE_RESOURCES" >&5 -$as_echo "$GLIB_COMPILE_RESOURCES" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test x$GLIB_COMPILE_RESOURCES = xno; then - as_fn_error $? "Could not find glib-compile-resources in your PATH" "$LINENO" 5 -fi - -# Linux is required for arbitrary baud rates - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_GREP" || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP" || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - - - for ac_header in $ac_header_list -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - - -ac_config_files="$ac_config_files Makefile src/Makefile po/Makefile.in" - - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 -$as_echo_n "checking that generated files are newer than configure... " >&6; } - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 -$as_echo "done" >&6; } - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - - ac_config_commands="$ac_config_commands po/stamp-it" - - - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by GtkTerm $as_me 1.0, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -GtkTerm config.status 1.0 -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; - "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "po/stamp-it":C) - if ! grep "^# INTLTOOL_MAKEFILE$" "po/Makefile.in" > /dev/null ; then - as_fn_error $? "po/Makefile.in.in was not created by intltoolize." "$LINENO" 5 - fi - rm -f "po/stamp-it" "po/stamp-it.tmp" "po/POTFILES" "po/Makefile.tmp" - >"po/stamp-it.tmp" - sed '/^#/d - s/^[[].*] *// - /^[ ]*$/d - '"s|^| $ac_top_srcdir/|" \ - "$srcdir/po/POTFILES.in" | sed '$!s/$/ \\/' >"po/POTFILES" - - sed '/^POTFILES =/,/[^\\]$/ { - /^POTFILES =/!d - r po/POTFILES - } - ' "po/Makefile.in" >"po/Makefile" - rm -f "po/Makefile.tmp" - mv "po/stamp-it.tmp" "po/stamp-it" - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff -Nru gtkterm-0.99.7+git9d63182/configure.ac gtkterm-1.0.1/configure.ac --- gtkterm-0.99.7+git9d63182/configure.ac 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/configure.ac 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ -# GtkTerm autoconf script - -AC_INIT([GtkTerm], [1.0], [https://github.com/Jeija/gtkterm]) -AM_INIT_AUTOMAKE([foreign -Wall -Werror -Wno-portability]) -AC_PROG_CC -AC_CONFIG_HEADERS([config.h]) - -GETTEXT_PACKAGE="gtkterm" -AC_SUBST(GETTEXT_PACKAGE) -AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE,"$GETTEXT_PACKAGE", [GETTEXT package name]) -IT_PROG_INTLTOOL([0.40.0]) -AM_GLIB_GNU_GETTEXT - -# Use AM_SILENT_RULES if present -m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) - -PKG_CHECK_MODULES([gtk], [gtk+-3.0 >= 3.12.0]) -PKG_CHECK_MODULES([vte], [vte-2.91 >= 0.40.0]) - -if test "$CC" = "gcc" ; then - GNUCFLAGS="-Wall -fno-omit-frame-pointer -fno-strict-aliasing -O2" -fi -AC_SUBST(GNUCFLAGS) - -# Bundle GTK ui files with gresource -AC_PATH_PROG(GLIB_COMPILE_RESOURCES, glib-compile-resources, no) -if test x$GLIB_COMPILE_RESOURCES = xno; then - AC_MSG_ERROR(Could not find glib-compile-resources in your PATH) -fi - -# Linux is required for arbitrary baud rates -AC_CHECK_HEADERS_ONCE([linux/serial.h]) - -AC_CONFIG_FILES([Makefile src/Makefile po/Makefile.in]) - -AC_OUTPUT diff -Nru gtkterm-0.99.7+git9d63182/data/config_terminal_dialog.ui gtkterm-1.0.1/data/config_terminal_dialog.ui --- gtkterm-0.99.7+git9d63182/data/config_terminal_dialog.ui 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/data/config_terminal_dialog.ui 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,216 @@ + + + + + + 100 + 99999 + 3000 + 1 + 10 + + + 290 + 245 + False + False + True + center-on-parent + True + dialog + center + + + False + center + center + vertical + 2 + + + False + + + Close + True + True + True + bottom + + + True + True + 0 + + + + + False + False + 1 + + + + + True + False + center + start + 5 + 6 + 12 + True + + + True + False + Terminal Font + 0.01 + 1 + + + + + + 0 + 0 + + + + + True + True + True + Sans 12 + + + + 1 + 0 + + + + + True + False + Scrollback Lines + 1 + + + + + + 0 + 1 + + + + + True + True + 5 + cfg_scrollback_lines + 100 + + + 1 + 1 + + + + + True + False + Background color + 1 + + + + + + 0 + 4 + + + + + True + True + True + start + Background color + + + 1 + 4 + + + + + True + False + Text color + 1 + + + + + + 0 + 3 + + + + + True + True + True + start + Text color + + + 1 + 3 + + + + + True + False + Block cursor + end + 1 + + + + + + 0 + 2 + + + + + True + True + start + center + True + True + + + 1 + 2 + + + + + False + True + 0 + + + + + + diff -Nru gtkterm-0.99.7+git9d63182/data/COPYING gtkterm-1.0.1/data/COPYING --- gtkterm-0.99.7+git9d63182/data/COPYING 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/data/COPYING 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,122 @@ +Creative Commons Legal Code + +CC0 1.0 Universal + + CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE + LEGAL SERVICES. DISTRIBUTION OF THIS DOCUMENT DOES NOT CREATE AN + ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS + INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES + REGARDING THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS + PROVIDED HEREUNDER, AND DISCLAIMS LIABILITY FOR DAMAGES RESULTING FROM + THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS PROVIDED + HEREUNDER. + +Statement of Purpose + +The laws of most jurisdictions throughout the world automatically confer +exclusive Copyright and Related Rights (defined below) upon the creator +and subsequent owner(s) (each and all, an "owner") of an original work of +authorship and/or a database (each, a "Work"). + +Certain owners wish to permanently relinquish those rights to a Work for +the purpose of contributing to a commons of creative, cultural and +scientific works ("Commons") that the public can reliably and without fear +of later claims of infringement build upon, modify, incorporate in other +works, reuse and redistribute as freely as possible in any form whatsoever +and for any purposes, including without limitation commercial purposes. +These owners may contribute to the Commons to promote the ideal of a free +culture and the further production of creative, cultural and scientific +works, or to gain reputation or greater distribution for their Work in +part through the use and efforts of others. + +For these and/or other purposes and motivations, and without any +expectation of additional consideration or compensation, the person +associating CC0 with a Work (the "Affirmer"), to the extent that he or she +is an owner of Copyright and Related Rights in the Work, voluntarily +elects to apply CC0 to the Work and publicly distribute the Work under its +terms, with knowledge of his or her Copyright and Related Rights in the +Work and the meaning and intended legal effect of CC0 on those rights. + +1. Copyright and Related Rights. A Work made available under CC0 may be +protected by copyright and related or neighboring rights ("Copyright and +Related Rights"). Copyright and Related Rights include, but are not +limited to, the following: + + i. the right to reproduce, adapt, distribute, perform, display, + communicate, and translate a Work; + ii. moral rights retained by the original author(s) and/or performer(s); +iii. publicity and privacy rights pertaining to a person's image or + likeness depicted in a Work; + iv. rights protecting against unfair competition in regards to a Work, + subject to the limitations in paragraph 4(a), below; + v. rights protecting the extraction, dissemination, use and reuse of data + in a Work; + vi. database rights (such as those arising under Directive 96/9/EC of the + European Parliament and of the Council of 11 March 1996 on the legal + protection of databases, and under any national implementation + thereof, including any amended or successor version of such + directive); and +vii. other similar, equivalent or corresponding rights throughout the + world based on applicable law or treaty, and any national + implementations thereof. + +2. Waiver. To the greatest extent permitted by, but not in contravention +of, applicable law, Affirmer hereby overtly, fully, permanently, +irrevocably and unconditionally waives, abandons, and surrenders all of +Affirmer's Copyright and Related Rights and associated claims and causes +of action, whether now known or unknown (including existing as well as +future claims and causes of action), in the Work (i) in all territories +worldwide, (ii) for the maximum duration provided by applicable law or +treaty (including future time extensions), (iii) in any current or future +medium and for any number of copies, and (iv) for any purpose whatsoever, +including without limitation commercial, advertising or promotional +purposes (the "Waiver"). Affirmer makes the Waiver for the benefit of each +member of the public at large and to the detriment of Affirmer's heirs and +successors, fully intending that such Waiver shall not be subject to +revocation, rescission, cancellation, termination, or any other legal or +equitable action to disrupt the quiet enjoyment of the Work by the public +as contemplated by Affirmer's express Statement of Purpose. + +3. Public License Fallback. Should any part of the Waiver for any reason +be judged legally invalid or ineffective under applicable law, then the +Waiver shall be preserved to the maximum extent permitted taking into +account Affirmer's express Statement of Purpose. In addition, to the +extent the Waiver is so judged Affirmer hereby grants to each affected +person a royalty-free, non transferable, non sublicensable, non exclusive, +irrevocable and unconditional license to exercise Affirmer's Copyright and +Related Rights in the Work (i) in all territories worldwide, (ii) for the +maximum duration provided by applicable law or treaty (including future +time extensions), (iii) in any current or future medium and for any number +of copies, and (iv) for any purpose whatsoever, including without +limitation commercial, advertising or promotional purposes (the +"License"). The License shall be deemed effective as of the date CC0 was +applied by Affirmer to the Work. Should any part of the License for any +reason be judged legally invalid or ineffective under applicable law, such +partial invalidity or ineffectiveness shall not invalidate the remainder +of the License, and in such case Affirmer hereby affirms that he or she +will not (i) exercise any of his or her remaining Copyright and Related +Rights in the Work or (ii) assert any associated claims and causes of +action with respect to the Work, in either case contrary to Affirmer's +express Statement of Purpose. + +4. Limitations and Disclaimers. + + a. No trademark or patent rights held by Affirmer are waived, abandoned, + surrendered, licensed or otherwise affected by this document. + b. Affirmer offers the Work as-is and makes no representations or + warranties of any kind concerning the Work, express, implied, + statutory or otherwise, including without limitation warranties of + title, merchantability, fitness for a particular purpose, non + infringement, or the absence of latent or other defects, accuracy, or + the present or absence of errors, whether or not discoverable, all to + the greatest extent permissible under applicable law. + c. Affirmer disclaims responsibility for clearing rights of other persons + that may apply to the Work or any use thereof, including without + limitation any person's Copyright and Related Rights in the Work. + Further, Affirmer disclaims responsibility for obtaining any necessary + consents, permissions or other rights required for any use of the + Work. + d. Affirmer understands and acknowledges that Creative Commons is not a + party to this document and has no duty or obligation with respect to + this CC0 or use of the Work. + diff -Nru gtkterm-0.99.7+git9d63182/data/gresource.xml gtkterm-1.0.1/data/gresource.xml --- gtkterm-0.99.7+git9d63182/data/gresource.xml 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/data/gresource.xml 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,7 @@ + + + + config_terminal_dialog.ui + gtkterm_64x64.png + + diff -Nru gtkterm-0.99.7+git9d63182/data/gtkterm.1 gtkterm-1.0.1/data/gtkterm.1 --- gtkterm-0.99.7+git9d63182/data/gtkterm.1 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/data/gtkterm.1 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,73 @@ +.TH GTKTerm "1" "September 15, 2019" +.\" Please adjust this date whenever revising the manpage. + +.SH NAME +GTKTerm \- A simple GTK+ serial port terminal + +.SH SYNOPSIS +.B gtkterm [ options ] + +.SH DESCRIPTION +.B gtkterm +is a simple GTK+ terminal used to communicate with the serial port. + +.SH OPTIONS +.B gtkterm +accepts the following options: + +.B \-h, \-\-help +Help screen. +.TP +.B \-c, \-\-config +Load configuration (default is "default"). +.TP +.B \-p, \-\-port +Serial port device (default /dev/ttyS0). +.TP +.B \-s, \-\-speed +Serial port speed (default 9600). +.TP +.B \-b, \-\-bits +Number of bits (default 8). +.TP +.B \-t, \-\-stopbits +Number of stopbits (default 1). +.TP +.B \-a, \-\-parity +Partity (default none). +.TP +.B \-w, \-\-flow +Flow control (default none). +.TP +.B \-d, \-\-delay +End of line delay in ms (default none). +.TP +.B \-r, \-\-char +Wait for a special char at end of line (default none). +.TP +.B \-f, \-\-file +Default file to send (default none). +.TP +.B \-e, \-\-echo +Set local echo. +.TP +.B \-x, \-\-rts_time_before +For rs485, time in ms before transmit with rts on +.TP +.B \-y, \-\-rts_time_after +For rs485, time in ms after transmit with rts on +.TP +.B \-e, \-\-echo +Switch on local echo +.TP +.B \-L, \-\-disable-port-lock +Do not lock serial port. Allows to send to serial port from different terminals. +.SH AUTHOR +.B gtkterm +was written by Julien Schmitt. +Maintained at https://github.com/Jeija/gtkterm by Willem van den Akker, +Florian Euchner + +.PP +This manual page was written by Sebastien Bacher , +for the Debian GNU/Linux system (but may be used by others). Binary files /tmp/tmp55KcXh/5rkG3eay5L/gtkterm-0.99.7+git9d63182/data/gtkterm_128x128.png and /tmp/tmp55KcXh/zNs5d03fAp/gtkterm-1.0.1/data/gtkterm_128x128.png differ Binary files /tmp/tmp55KcXh/5rkG3eay5L/gtkterm-0.99.7+git9d63182/data/gtkterm_256x256.png and /tmp/tmp55KcXh/zNs5d03fAp/gtkterm-1.0.1/data/gtkterm_256x256.png differ Binary files /tmp/tmp55KcXh/5rkG3eay5L/gtkterm-0.99.7+git9d63182/data/gtkterm_48x48.png and /tmp/tmp55KcXh/zNs5d03fAp/gtkterm-1.0.1/data/gtkterm_48x48.png differ Binary files /tmp/tmp55KcXh/5rkG3eay5L/gtkterm-0.99.7+git9d63182/data/gtkterm_64x64.png and /tmp/tmp55KcXh/zNs5d03fAp/gtkterm-1.0.1/data/gtkterm_64x64.png differ diff -Nru gtkterm-0.99.7+git9d63182/data/gtkterm.desktop.in gtkterm-1.0.1/data/gtkterm.desktop.in --- gtkterm-0.99.7+git9d63182/data/gtkterm.desktop.in 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/data/gtkterm.desktop.in 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,10 @@ +[Desktop Entry] +Name=GTKTerm +GenericName=Serial Port Terminal +Comment=Connect to serial consoles +Keywords=serial;console;terminal; +Icon=gtkterm +Exec=gtkterm +Terminal=false +Type=Application +Categories=GNOME;GTK;Utility Binary files /tmp/tmp55KcXh/5rkG3eay5L/gtkterm-0.99.7+git9d63182/data/gtkterm.png and /tmp/tmp55KcXh/zNs5d03fAp/gtkterm-1.0.1/data/gtkterm.png differ diff -Nru gtkterm-0.99.7+git9d63182/data/meson.build gtkterm-1.0.1/data/meson.build --- gtkterm-0.99.7+git9d63182/data/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/data/meson.build 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,59 @@ +gnome = import('gnome') + +# Glade UI files +gresources = gnome.compile_resources('resource', 'gresource.xml', source_dir: '.') + +# Desktop file +desktop_config = configuration_data() +desktop_config.set('VERSION', meson.project_version()) + +desktop_file_configured = configure_file( + input: 'gtkterm.desktop.in', + output: 'gtkterm.desktop', + configuration: desktop_config, + install_dir: join_paths( + datadir, + 'applications', + ) +) + +desktop_file_validate = find_program('desktop-file-validate', required: false) +if desktop_file_validate.found() + test( + 'desktop file test', + desktop_file_validate, + args: [ + desktop_file_configured + ] + ) +endif + +# Icon +install_data('gtkterm_256x256.png', + install_dir: join_paths(datadir, 'icons', 'hicolor', '256x256', 'apps'), + rename : 'gtkterm.png' +) + +install_data('gtkterm_128x128.png', + install_dir: join_paths(datadir, 'icons', 'hicolor', '128x128', 'apps'), + rename : 'gtkterm.png' +) + +install_data('gtkterm_64x64.png', + install_dir: join_paths(datadir, 'icons', 'hicolor', '64x64', 'apps'), + rename : 'gtkterm.png' +) + +install_data('gtkterm_48x48.png', + install_dir: join_paths(datadir, 'icons', 'hicolor', '48x48', 'apps'), + rename : 'gtkterm.png' +) + + +install_data('gtkterm_48x48.png', + install_dir: join_paths(datadir, 'icons', 'hicolor', '48x48', 'apps'), + rename : 'gtkterm.png' +) + +# Manpage +install_man('gtkterm.1') diff -Nru gtkterm-0.99.7+git9d63182/debian/changelog gtkterm-1.0.1/debian/changelog --- gtkterm-0.99.7+git9d63182/debian/changelog 2019-12-19 13:11:17.000000000 +0000 +++ gtkterm-1.0.1/debian/changelog 2019-12-19 13:11:18.000000000 +0000 @@ -1,3 +1,30 @@ +gtkterm (1.0.1-1) unstable; urgency=medium + + * New upstream release. + * debian/rules + - switch to meson buildsystem. + * debian/control + - add build dependencies. + - switch to debhelper-compat. + - bump standards to 4.4.1. No changes needed. + - correct VCS-git link. + - add Rules-Requires-Root: no. + * debian/install + - icons are now in data directory. + * debian/docs + - remove TODO. + * debian/compat + - remove. + + -- Willem van den Akker Wed, 18 Dec 2019 17:38:00 +0100 + +gtkterm (0.99.7+git9d63182-3) unstable; urgency=medium + + * debian/control + - corrected mismatch standards-version with changelog. + + -- Willem van den Akker Tue, 10 Jul 2018 10:21:02 +0200 + gtkterm (0.99.7+git9d63182-2) unstable; urgency=medium * debian/control diff -Nru gtkterm-0.99.7+git9d63182/debian/compat gtkterm-1.0.1/debian/compat --- gtkterm-0.99.7+git9d63182/debian/compat 2019-12-19 13:11:17.000000000 +0000 +++ gtkterm-1.0.1/debian/compat 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -11 diff -Nru gtkterm-0.99.7+git9d63182/debian/control gtkterm-1.0.1/debian/control --- gtkterm-0.99.7+git9d63182/debian/control 2019-12-19 13:11:17.000000000 +0000 +++ gtkterm-1.0.1/debian/control 2019-12-19 13:11:18.000000000 +0000 @@ -1,11 +1,18 @@ Source: gtkterm Section: comm Priority: optional +Rules-Requires-Root: no Maintainer: Willem van den Akker -Build-Depends: debhelper (>= 11), libgtk-3-dev, libvte-2.91-dev, intltool, libxml2-utils -Standards-Version: 4.1.3 +Build-Depends: debhelper-compat (= 12), + meson, + libgudev-1.0-dev, + libgtk-3-dev, + libvte-2.91-dev, + intltool, + libxml2-utils +Standards-Version: 4.4.1 Vcs-Browser: https://salsa.debian.org/wvdakker-guest/gtkterm -Vcs-Git: https://salsa.debian.org:wvdakker-guest/gtkterm.git +Vcs-Git: https://salsa.debian.org/wvdakker-guest/gtkterm.git Homepage: https://github.com/Jeija/gtkterm Package: gtkterm diff -Nru gtkterm-0.99.7+git9d63182/debian/copyright gtkterm-1.0.1/debian/copyright --- gtkterm-0.99.7+git9d63182/debian/copyright 2019-12-19 13:11:17.000000000 +0000 +++ gtkterm-1.0.1/debian/copyright 2019-12-19 13:11:18.000000000 +0000 @@ -5,6 +5,7 @@ Files: * Copyright: Julien Schmitt Zach Davis + Florian Euchner License: GPL-3+ Files: src/parsecfg.c and src/parsecfg.h diff -Nru gtkterm-0.99.7+git9d63182/debian/docs gtkterm-1.0.1/debian/docs --- gtkterm-0.99.7+git9d63182/debian/docs 2019-12-19 13:11:17.000000000 +0000 +++ gtkterm-1.0.1/debian/docs 2019-12-19 13:11:18.000000000 +0000 @@ -1,3 +1,2 @@ NEWS README.md -TODO diff -Nru gtkterm-0.99.7+git9d63182/debian/install gtkterm-1.0.1/debian/install --- gtkterm-0.99.7+git9d63182/debian/install 2019-12-19 13:11:17.000000000 +0000 +++ gtkterm-1.0.1/debian/install 2019-12-19 13:11:18.000000000 +0000 @@ -1,2 +1,2 @@ -icon/gtkterm.png usr/share/pixmaps +data/gtkterm.png usr/share/pixmaps debian/gtkterm.desktop usr/share/applications diff -Nru gtkterm-0.99.7+git9d63182/debian/rules gtkterm-1.0.1/debian/rules --- gtkterm-0.99.7+git9d63182/debian/rules 2019-12-19 13:11:17.000000000 +0000 +++ gtkterm-1.0.1/debian/rules 2019-12-19 13:11:18.000000000 +0000 @@ -5,4 +5,4 @@ #export DH_VERBOSE=1 %: - dh $@ + dh $@ --builsystem=meson+ninja diff -Nru gtkterm-0.99.7+git9d63182/depcomp gtkterm-1.0.1/depcomp --- gtkterm-0.99.7+git9d63182/depcomp 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/depcomp 1970-01-01 00:00:00.000000000 +0000 @@ -1,688 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2011-12-04.11; # UTC - -# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010, -# 2011 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva . - -case $1 in - '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by `PROGRAMS ARGS'. - object Object file output by `PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputting dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit $? - ;; -esac - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -cygpath_u="cygpath -u -f -" -if test "$depmode" = msvcmsys; then - # This is just like msvisualcpp but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvisualcpp -fi - -if test "$depmode" = msvc7msys; then - # This is just like msvc7 but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvc7 -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. -## Unfortunately, FreeBSD c89 acceptance of flags depends upon -## the command line argument order; so add the flags where they -## appear in depend2.am. Note that the slowdown incurred here -## affects only configure: in makefiles, %FASTDEP% shortcuts this. - for arg - do - case $arg in - -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; - *) set fnord "$@" "$arg" ;; - esac - shift # fnord - shift # $arg - done - "$@" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory -## that the space means something, we add a space to the output as -## well. hp depmode also adds that space, but also prefixes the VPATH -## to the object. Take care to not repeat it in the output. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the - # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> "$depfile" - echo >> "$depfile" - - # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.u - tmpdepfile2=$base.u - tmpdepfile3=$dir.libs/$base.u - "$@" -Wc,-M - else - tmpdepfile1=$dir$base.u - tmpdepfile2=$dir$base.u - tmpdepfile3=$dir$base.u - "$@" -M - fi - stat=$? - - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # ICC 7.0 will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want: - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - # ICC 7.1 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | - sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp2) - # The "hp" stanza above does not work with aCC (C++) and HP's ia64 - # compilers, which have integrated preprocessors. The correct option - # to use with these is +Maked; it writes dependencies to a file named - # 'foo.d', which lands next to the object file, wherever that - # happens to be. - # Much of this is similar to the tru64 case; see comments there. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir.libs/$base.d - "$@" -Wc,+Maked - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - "$@" +Maked - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" - # Add `dependent.h:' lines. - sed -ne '2,${ - s/^ *// - s/ \\*$// - s/$/:/ - p - }' "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" "$tmpdepfile2" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - - if test "$libtool" = yes; then - # With Tru64 cc, shared objects can also be used to make a - # static library. This mechanism is used in libtool 1.4 series to - # handle both shared and static libraries in a single compilation. - # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. - # - # With libtool 1.5 this exception was removed, and libtool now - # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 - tmpdepfile2=$dir$base.o.d # libtool 1.5 - tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 - tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.o.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - tmpdepfile4=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -msvc7) - if test "$libtool" = yes; then - showIncludes=-Wc,-showIncludes - else - showIncludes=-showIncludes - fi - "$@" $showIncludes > "$tmpdepfile" - stat=$? - grep -v '^Note: including file: ' "$tmpdepfile" - if test "$stat" = 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - # The first sed program below extracts the file names and escapes - # backslashes for cygpath. The second sed program outputs the file - # name when reading, but also accumulates all include files in the - # hold buffer in order to output them again at the end. This only - # works with sed implementations that can handle large buffers. - sed < "$tmpdepfile" -n ' -/^Note: including file: *\(.*\)/ { - s//\1/ - s/\\/\\\\/g - p -}' | $cygpath_u | sort -u | sed -n ' -s/ /\\ /g -s/\(.*\)/ \1 \\/p -s/.\(.*\) \\/\1:/ -H -$ { - s/.*/ / - G - p -}' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvc7msys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. - "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no eat=no - for arg - do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - if test $eat = yes; then - eat=no - continue - fi - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -arch) - eat=yes ;; - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix=`echo "$object" | sed 's/^.*\././'` - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - # makedepend may prepend the VPATH from the source file name to the object. - # No need to regex-escape $object, excess matching of '.' is harmless. - sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E | - sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - IFS=" " - for arg - do - case "$arg" in - -o) - shift - ;; - $object) - shift - ;; - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E 2>/dev/null | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvcmsys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru gtkterm-0.99.7+git9d63182/gtkterm.1 gtkterm-1.0.1/gtkterm.1 --- gtkterm-0.99.7+git9d63182/gtkterm.1 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/gtkterm.1 1970-01-01 00:00:00.000000000 +0000 @@ -1,75 +0,0 @@ -.\" Hey, EMACS: -*- nroff -*- -.\" First parameter, NAME, should be all caps -.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection -.\" other parameters are allowed: see man(7), man(1) -.TH GTKTERM "1" "August 26, 2010" -.\" Please adjust this date whenever revising the manpage. -.\" -.\" Some roff macros, for reference: -.\" .nh disable hyphenation -.\" .hy enable hyphenation -.\" .ad l left justify -.\" .ad b justify to both left and right margins -.\" .nf disable filling -.\" .fi enable filling -.\" .br insert line break -.\" .sp insert n+1 empty lines -.\" for manpage-specific macros, see man(7) -.SH NAME -gtkterm \- A simple GTK+ serial port terminal - -.SH SYNOPSIS -.B gtkterm [ options ] - -.SH DESCRIPTION -.B gtkterm -is a simple GTK+ terminal used to communicate with the serial port. - -.SH OPTIONS -.B gtkterm -accepts the following options: - -.B \-h, \-\-help -Help screen. -.TP -.B \-c, \-\-config -Load configuration (default is "default"). -.TP -.B \-p, \-\-port -Serial port device (default /dev/ttyS0). -.TP -.B \-s, \-\-speed -Serial port speed (default 9600). -.TP -.B \-b, \-\-bits -Number of bits (default 8). -.TP -.B \-t, \-\-stopbits -Number of stopbits (default 1). -.TP -.B \-a, \-\-parity -Partity (default none). -.TP -.B \-w, \-\-flow -Flow control (default none). -.TP -.B \-d, \-\-delay -End of line delay in ms (default none). -.TP -.B \-r, \-\-char -Wait for a special char at end of line (default none). -.TP -.B \-f, \-\-file -Default file to send (default none). -.TP -.B \-e, \-\-echo -Set local echo. - -.SH AUTHOR -.B gtkterm -was written by Julien Schmitt. -Maintained at https://fedorahosted.org/gtkterm/ -By Zach Davis -.PP -This manual page was written by Sebastien Bacher , -for the Debian GNU/Linux system (but may be used by others). diff -Nru gtkterm-0.99.7+git9d63182/icon/COPYING gtkterm-1.0.1/icon/COPYING --- gtkterm-0.99.7+git9d63182/icon/COPYING 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/icon/COPYING 1970-01-01 00:00:00.000000000 +0000 @@ -1,122 +0,0 @@ -Creative Commons Legal Code - -CC0 1.0 Universal - - CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE - LEGAL SERVICES. DISTRIBUTION OF THIS DOCUMENT DOES NOT CREATE AN - ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS - INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES - REGARDING THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS - PROVIDED HEREUNDER, AND DISCLAIMS LIABILITY FOR DAMAGES RESULTING FROM - THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS PROVIDED - HEREUNDER. - -Statement of Purpose - -The laws of most jurisdictions throughout the world automatically confer -exclusive Copyright and Related Rights (defined below) upon the creator -and subsequent owner(s) (each and all, an "owner") of an original work of -authorship and/or a database (each, a "Work"). - -Certain owners wish to permanently relinquish those rights to a Work for -the purpose of contributing to a commons of creative, cultural and -scientific works ("Commons") that the public can reliably and without fear -of later claims of infringement build upon, modify, incorporate in other -works, reuse and redistribute as freely as possible in any form whatsoever -and for any purposes, including without limitation commercial purposes. -These owners may contribute to the Commons to promote the ideal of a free -culture and the further production of creative, cultural and scientific -works, or to gain reputation or greater distribution for their Work in -part through the use and efforts of others. - -For these and/or other purposes and motivations, and without any -expectation of additional consideration or compensation, the person -associating CC0 with a Work (the "Affirmer"), to the extent that he or she -is an owner of Copyright and Related Rights in the Work, voluntarily -elects to apply CC0 to the Work and publicly distribute the Work under its -terms, with knowledge of his or her Copyright and Related Rights in the -Work and the meaning and intended legal effect of CC0 on those rights. - -1. Copyright and Related Rights. A Work made available under CC0 may be -protected by copyright and related or neighboring rights ("Copyright and -Related Rights"). Copyright and Related Rights include, but are not -limited to, the following: - - i. the right to reproduce, adapt, distribute, perform, display, - communicate, and translate a Work; - ii. moral rights retained by the original author(s) and/or performer(s); -iii. publicity and privacy rights pertaining to a person's image or - likeness depicted in a Work; - iv. rights protecting against unfair competition in regards to a Work, - subject to the limitations in paragraph 4(a), below; - v. rights protecting the extraction, dissemination, use and reuse of data - in a Work; - vi. database rights (such as those arising under Directive 96/9/EC of the - European Parliament and of the Council of 11 March 1996 on the legal - protection of databases, and under any national implementation - thereof, including any amended or successor version of such - directive); and -vii. other similar, equivalent or corresponding rights throughout the - world based on applicable law or treaty, and any national - implementations thereof. - -2. Waiver. To the greatest extent permitted by, but not in contravention -of, applicable law, Affirmer hereby overtly, fully, permanently, -irrevocably and unconditionally waives, abandons, and surrenders all of -Affirmer's Copyright and Related Rights and associated claims and causes -of action, whether now known or unknown (including existing as well as -future claims and causes of action), in the Work (i) in all territories -worldwide, (ii) for the maximum duration provided by applicable law or -treaty (including future time extensions), (iii) in any current or future -medium and for any number of copies, and (iv) for any purpose whatsoever, -including without limitation commercial, advertising or promotional -purposes (the "Waiver"). Affirmer makes the Waiver for the benefit of each -member of the public at large and to the detriment of Affirmer's heirs and -successors, fully intending that such Waiver shall not be subject to -revocation, rescission, cancellation, termination, or any other legal or -equitable action to disrupt the quiet enjoyment of the Work by the public -as contemplated by Affirmer's express Statement of Purpose. - -3. Public License Fallback. Should any part of the Waiver for any reason -be judged legally invalid or ineffective under applicable law, then the -Waiver shall be preserved to the maximum extent permitted taking into -account Affirmer's express Statement of Purpose. In addition, to the -extent the Waiver is so judged Affirmer hereby grants to each affected -person a royalty-free, non transferable, non sublicensable, non exclusive, -irrevocable and unconditional license to exercise Affirmer's Copyright and -Related Rights in the Work (i) in all territories worldwide, (ii) for the -maximum duration provided by applicable law or treaty (including future -time extensions), (iii) in any current or future medium and for any number -of copies, and (iv) for any purpose whatsoever, including without -limitation commercial, advertising or promotional purposes (the -"License"). The License shall be deemed effective as of the date CC0 was -applied by Affirmer to the Work. Should any part of the License for any -reason be judged legally invalid or ineffective under applicable law, such -partial invalidity or ineffectiveness shall not invalidate the remainder -of the License, and in such case Affirmer hereby affirms that he or she -will not (i) exercise any of his or her remaining Copyright and Related -Rights in the Work or (ii) assert any associated claims and causes of -action with respect to the Work, in either case contrary to Affirmer's -express Statement of Purpose. - -4. Limitations and Disclaimers. - - a. No trademark or patent rights held by Affirmer are waived, abandoned, - surrendered, licensed or otherwise affected by this document. - b. Affirmer offers the Work as-is and makes no representations or - warranties of any kind concerning the Work, express, implied, - statutory or otherwise, including without limitation warranties of - title, merchantability, fitness for a particular purpose, non - infringement, or the absence of latent or other defects, accuracy, or - the present or absence of errors, whether or not discoverable, all to - the greatest extent permissible under applicable law. - c. Affirmer disclaims responsibility for clearing rights of other persons - that may apply to the Work or any use thereof, including without - limitation any person's Copyright and Related Rights in the Work. - Further, Affirmer disclaims responsibility for obtaining any necessary - consents, permissions or other rights required for any use of the - Work. - d. Affirmer understands and acknowledges that Creative Commons is not a - party to this document and has no duty or obligation with respect to - this CC0 or use of the Work. - Binary files /tmp/tmp55KcXh/5rkG3eay5L/gtkterm-0.99.7+git9d63182/icon/gtkterm.png and /tmp/tmp55KcXh/zNs5d03fAp/gtkterm-1.0.1/icon/gtkterm.png differ Binary files /tmp/tmp55KcXh/5rkG3eay5L/gtkterm-0.99.7+git9d63182/icon/gtkterm_small.png and /tmp/tmp55KcXh/zNs5d03fAp/gtkterm-1.0.1/icon/gtkterm_small.png differ Binary files /tmp/tmp55KcXh/5rkG3eay5L/gtkterm-0.99.7+git9d63182/icon/Serial-port-300px.png and /tmp/tmp55KcXh/zNs5d03fAp/gtkterm-1.0.1/icon/Serial-port-300px.png differ diff -Nru gtkterm-0.99.7+git9d63182/INSTALL gtkterm-1.0.1/INSTALL --- gtkterm-0.99.7+git9d63182/INSTALL 2017-11-17 16:09:56.000000000 +0000 +++ gtkterm-1.0.1/INSTALL 1970-01-01 00:00:00.000000000 +0000 @@ -1,229 +0,0 @@ -Copyright 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software -Foundation, Inc. - - This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. - -Basic Installation -================== - - These are generic installation instructions. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. (Caching is -disabled by default to prevent problems with accidental use of stale -cache files.) - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You only need -`configure.ac' if you want to change it or regenerate `configure' using -a newer version of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. - - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - -Compilers and Options -===================== - - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. Run `./configure --help' -for details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - - You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - If you have to use a `make' that does not support the `VPATH' -variable, you have to compile the package for one architecture at a -time in the source code directory. After you have installed the -package for one architecture, use `make distclean' before reconfiguring -for another architecture. - -Installation Names -================== - - By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PATH'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PATH', the package will use -PATH as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=PATH' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - - There may be some features `configure' cannot figure out -automatically, but needs to determine by the type of machine the package -will run on. Usually, assuming the package is built to be run on the -_same_ architectures, `configure' can figure that out, but if it prints -a message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the `--target=TYPE' option to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - - Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -will cause the specified gcc to be used as the C compiler (unless it is -overridden in the site shell script). - -`configure' Invocation -====================== - - `configure' recognizes the following options to control how it -operates. - -`--help' -`-h' - Print a summary of the options to `configure', and exit. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. - diff -Nru gtkterm-0.99.7+git9d63182/install-sh gtkterm-1.0.1/install-sh --- gtkterm-0.99.7+git9d63182/install-sh 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/install-sh 1970-01-01 00:00:00.000000000 +0000 @@ -1,527 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2011-01-19.21; # UTC - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -nl=' -' -IFS=" "" $nl" - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -no_target_directory= - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -t) dst_arg=$2 - # Protect names problematic for `test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - shift;; - - -T) no_target_directory=true;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - # Protect names problematic for `test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - do_exit='(exit $ret); exit $ret' - trap "ret=129; $do_exit" 1 - trap "ret=130; $do_exit" 2 - trap "ret=141; $do_exit" 13 - trap "ret=143; $do_exit" 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names problematic for `test' and other utilities. - case $src in - -* | [=\(\)!]) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - dst=$dst_arg - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - [-=\(\)!]*) prefix='./';; - *) prefix='';; - esac - - eval "$initialize_posix_glob" - - oIFS=$IFS - IFS=/ - $posix_glob set -f - set fnord $dstdir - shift - $posix_glob set +f - IFS=$oIFS - - prefixes= - - for d - do - test X"$d" = X && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru gtkterm-0.99.7+git9d63182/Makefile.am gtkterm-1.0.1/Makefile.am --- gtkterm-0.99.7+git9d63182/Makefile.am 2017-11-17 16:09:56.000000000 +0000 +++ gtkterm-1.0.1/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ -# GtkTerm Makefile.am - -SUBDIRS = src po -man_MANS = gtkterm.1 -EXTRA_DIST = TODO $(man_MANS) - diff -Nru gtkterm-0.99.7+git9d63182/Makefile.in gtkterm-1.0.1/Makefile.in --- gtkterm-0.99.7+git9d63182/Makefile.in 2017-11-17 16:09:56.000000000 +0000 +++ gtkterm-1.0.1/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,875 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# GtkTerm Makefile.am -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -subdir = . -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ - $(am__configure_deps) $(am__DIST_COMMON) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ - ctags-recursive dvi-recursive html-recursive info-recursive \ - install-data-recursive install-dvi-recursive \ - install-exec-recursive install-html-recursive \ - install-info-recursive install-pdf-recursive \ - install-ps-recursive install-recursive installcheck-recursive \ - installdirs-recursive pdf-recursive ps-recursive \ - tags-recursive uninstall-recursive -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -man1dir = $(mandir)/man1 -am__installdirs = "$(DESTDIR)$(man1dir)" -NROFF = nroff -MANS = $(man_MANS) -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -am__recursive_targets = \ - $(RECURSIVE_TARGETS) \ - $(RECURSIVE_CLEAN_TARGETS) \ - $(am__extra_recursive_targets) -AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ - cscope distdir dist dist-all distcheck -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ - $(LISP)config.h.in -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -CSCOPE = cscope -DIST_SUBDIRS = $(SUBDIRS) -am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in AUTHORS \ - COPYING ChangeLog INSTALL NEWS TODO compile depcomp install-sh \ - missing -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ - || { sleep 5 && rm -rf "$(distdir)"; }; \ - else :; fi -am__post_remove_distdir = $(am__remove_distdir) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = --best -DIST_TARGETS = dist-gzip -distuninstallcheck_listfiles = find . -type f -print -am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ - | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GMSGFMT = @GMSGFMT@ -GNUCFLAGS = @GNUCFLAGS@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ -INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ -INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ -INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGMERGE = @MSGMERGE@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -XGETTEXT = @XGETTEXT@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build_alias = @build_alias@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gtk_CFLAGS = @gtk_CFLAGS@ -gtk_LIBS = @gtk_LIBS@ -host_alias = @host_alias@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -intltool__v_merge_options_ = @intltool__v_merge_options_@ -intltool__v_merge_options_0 = @intltool__v_merge_options_0@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -runstatedir = @runstatedir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -vte_CFLAGS = @vte_CFLAGS@ -vte_LIBS = @vte_LIBS@ -SUBDIRS = src po -man_MANS = gtkterm.1 -EXTRA_DIST = TODO $(man_MANS) -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -am--refresh: Makefile - @: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -config.h: stamp-h1 - @test -f $@ || rm -f stamp-h1 - @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 -install-man1: $(man_MANS) - @$(NORMAL_INSTALL) - @list1=''; \ - list2='$(man_MANS)'; \ - test -n "$(man1dir)" \ - && test -n "`echo $$list1$$list2`" \ - || exit 0; \ - echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ - { for i in $$list1; do echo "$$i"; done; \ - if test -n "$$list2"; then \ - for i in $$list2; do echo "$$i"; done \ - | sed -n '/\.1[a-z]*$$/p'; \ - fi; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ - done; } - -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list=''; test -n "$(man1dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ - sed -n '/\.1[a-z]*$$/p'; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) - -# This directory's subdirectories are mostly independent; you can cd -# into them and run 'make' without going through this Makefile. -# To change the values of 'make' variables: instead of editing Makefiles, -# (1) if the variable is set in 'config.status', edit 'config.status' -# (which will cause the Makefiles to be regenerated when you run 'make'); -# (2) otherwise, pass the desired values on the 'make' command line. -$(am__recursive_targets): - @fail=; \ - if $(am__make_keepgoing); then \ - failcom='fail=yes'; \ - else \ - failcom='exit 1'; \ - fi; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-recursive -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-recursive - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscope: cscope.files - test ! -s cscope.files \ - || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) -clean-cscope: - -rm -f cscope.files -cscope.files: clean-cscope cscopelist -cscopelist: cscopelist-recursive - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -rm -f cscope.out cscope.in.out cscope.po.out cscope.files - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - $(am__make_dryrun) \ - || test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz - $(am__post_remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 - $(am__post_remove_distdir) - -dist-lzip: distdir - tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz - $(am__post_remove_distdir) - -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz - $(am__post_remove_distdir) - -dist-tarZ: distdir - @echo WARNING: "Support for distribution archives compressed with" \ - "legacy program 'compress' is deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__post_remove_distdir) - -dist-shar: distdir - @echo WARNING: "Support for shar distribution archives is" \ - "deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz - $(am__post_remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__post_remove_distdir) - -dist dist-all: - $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' - $(am__post_remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lz*) \ - lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir) - chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build/sub \ - && ../../configure \ - $(AM_DISTCHECK_CONFIGURE_FLAGS) \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - --srcdir=../.. --prefix="$$dc_install_base" \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__post_remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @test -n '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: trying to run $@ with an empty' \ - '$$(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - $(am__cd) '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile $(MANS) config.h -installdirs: installdirs-recursive -installdirs-am: - for dir in "$(DESTDIR)$(man1dir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-hdr distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: install-man - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: install-man1 - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: uninstall-man - -uninstall-man: uninstall-man1 - -.MAKE: $(am__recursive_targets) all install-am install-strip - -.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ - am--refresh check check-am clean clean-cscope clean-generic \ - cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ - dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ - distcheck distclean distclean-generic distclean-hdr \ - distclean-tags distcleancheck distdir distuninstallcheck dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-man1 \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ - tags-am uninstall uninstall-am uninstall-man uninstall-man1 - -.PRECIOUS: Makefile - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru gtkterm-0.99.7+git9d63182/meson.build gtkterm-1.0.1/meson.build --- gtkterm-0.99.7+git9d63182/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/meson.build 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,35 @@ +project( + 'gtkterm', + 'c', + version: '1.0.1', + meson_version : '>= 0.46.0' +) + +# Find dependencies +gtk_deps = dependency('gtk+-3.0', version : '>= 3.0.0') +vte_deps = dependency('vte-2.91', version : '>= 0.28.0') +gudev_deps = dependency('gudev-1.0', version: '>= 230') + +# Find install paths +prefix = get_option('prefix') +datadir = join_paths(prefix, get_option('datadir')) +localedir = join_paths(prefix, get_option('localedir')) + +# Configure GTKTerm +conf = configuration_data() +conf.set_quoted('VERSION', meson.project_version()) +conf.set_quoted('PACKAGE', meson.project_name()) +conf.set_quoted('LOCALEDIR', localedir) + +cc = meson.get_compiler('c') +have_serial_h = cc.has_header('linux/serial.h') +if have_serial_h + conf.set('HAVE_LINUX_SERIAL_H', '1') +endif + +configure_file(output : 'config.h', configuration : conf) +config = declare_dependency(include_directories : include_directories('.')) + +subdir('data') +subdir('src') +subdir('po') diff -Nru gtkterm-0.99.7+git9d63182/missing gtkterm-1.0.1/missing --- gtkterm-0.99.7+git9d63182/missing 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/missing 1970-01-01 00:00:00.000000000 +0000 @@ -1,331 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. - -scriptversion=2012-01-06.13; # UTC - -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -msg="missing on your system" - -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - yacc create \`y.tab.[ch]', if possible, from existing .[ch] - -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. - -Send bug reports to ." - exit $? - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit $? - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - -esac - -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; - - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te*) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru gtkterm-0.99.7+git9d63182/NEWS gtkterm-1.0.1/NEWS --- gtkterm-0.99.7+git9d63182/NEWS 2017-11-17 16:09:56.000000000 +0000 +++ gtkterm-1.0.1/NEWS 2019-12-18 16:31:37.000000000 +0000 @@ -1,3 +1,8 @@ +1.0.1 : Change to meson buildsystem + Autoreconnect last port + Add several translations + Bugfix: show HEX output + 0.99.6 : Change of maintainership handfull of existing patches applied @@ -11,9 +16,9 @@ 0.98.3 : now gtkterm has a configuration file -0.98 : first GTK+ 2.0 version - lots of other changes ! see ChangeLog - -0.97 : control signals control +0.98 : first GTK+ 2.0 version + lots of other changes ! see ChangeLog + +0.97 : control signals control -0.9 : initial revision +0.9 : initial revision diff -Nru gtkterm-0.99.7+git9d63182/po/ChangeLog gtkterm-1.0.1/po/ChangeLog --- gtkterm-0.99.7+git9d63182/po/ChangeLog 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/po/ChangeLog 1970-01-01 00:00:00.000000000 +0000 @@ -1,22 +0,0 @@ -2010-11-10 gettextize - - * Makefile.in.in: Upgrade to gettext-0.17. - * boldquot.sed: New file, from gettext-0.17. - * en@boldquot.header: New file, from gettext-0.17. - * en@quot.header: New file, from gettext-0.17. - * insert-header.sin: New file, from gettext-0.17. - * quot.sed: New file, from gettext-0.17. - * remove-potcdate.sin: New file, from gettext-0.17. - * Rules-quot: New file, from gettext-0.17. - -2003-03-07 gettextize - - * Makefile.in.in: New file, from gettext-0.11.5. - * boldquot.sed: New file, from gettext-0.11.5. - * en@boldquot.header: New file, from gettext-0.11.5. - * en@quot.header: New file, from gettext-0.11.5. - * insert-header.sin: New file, from gettext-0.11.5. - * quot.sed: New file, from gettext-0.11.5. - * remove-potcdate.sin: New file, from gettext-0.11.5. - * Rules-quot: New file, from gettext-0.11.5. - diff -Nru gtkterm-0.99.7+git9d63182/po/LANGUAGES gtkterm-1.0.1/po/LANGUAGES --- gtkterm-0.99.7+git9d63182/po/LANGUAGES 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/po/LANGUAGES 1970-01-01 00:00:00.000000000 +0000 @@ -1,2 +0,0 @@ -fr hu ru de - diff -Nru gtkterm-0.99.7+git9d63182/po/LINGUAS gtkterm-1.0.1/po/LINGUAS --- gtkterm-0.99.7+git9d63182/po/LINGUAS 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/po/LINGUAS 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1 @@ +fr hu ru de zh_CN diff -Nru gtkterm-0.99.7+git9d63182/po/Makefile.in.in gtkterm-1.0.1/po/Makefile.in.in --- gtkterm-0.99.7+git9d63182/po/Makefile.in.in 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/po/Makefile.in.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,217 +0,0 @@ -# Makefile for program source directory in GNU NLS utilities package. -# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper -# Copyright (C) 2004-2008 Rodney Dawes -# -# This file may be copied and used freely without restrictions. It may -# be used in projects which are not available under a GNU Public License, -# but which still want to provide support for the GNU gettext functionality. -# -# - Modified by Owen Taylor to use GETTEXT_PACKAGE -# instead of PACKAGE and to look for po2tbl in ./ not in intl/ -# -# - Modified by jacob berkman to install -# Makefile.in.in and po2tbl.sed.in for use with glib-gettextize -# -# - Modified by Rodney Dawes for use with intltool -# -# We have the following line for use by intltoolize: -# INTLTOOL_MAKEFILE - -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -PACKAGE = @PACKAGE@ -VERSION = @VERSION@ - -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = @top_builddir@ -VPATH = @srcdir@ - -prefix = @prefix@ -exec_prefix = @exec_prefix@ -datadir = @datadir@ -datarootdir = @datarootdir@ -libdir = @libdir@ -DATADIRNAME = @DATADIRNAME@ -itlocaledir = $(prefix)/$(DATADIRNAME)/locale -subdir = po -install_sh = @install_sh@ -# Automake >= 1.8 provides @mkdir_p@. -# Until it can be supposed, use the safe fallback: -mkdir_p = $(install_sh) -d - -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ - -GMSGFMT = @GMSGFMT@ -MSGFMT = @MSGFMT@ -XGETTEXT = @XGETTEXT@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -MSGMERGE = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --dist -GENPOT = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --pot - -ALL_LANGUAGES = @ALL_LANGUAGES@ - -PO_LANGUAGES=$(shell if test -r $(srcdir)/LANGUAGES; then grep -v "^\#" $(srcdir)/LANGUAGES; else echo "$(ALL_LANGUAGES)"; fi) - -USER_LANGUAGES=$(shell if test -n "$(LANGUAGES)"; then LLANGUAGES="$(LANGUAGES)"; ALANGUAGES="$(ALL_LANGUAGES)"; for lang in $$LLANGUAGES; do if test -n "`grep \^$$lang$$ $(srcdir)/LANGUAGES 2>/dev/null`" -o -n "`echo $$ALANGUAGES|tr ' ' '\n'|grep \^$$lang$$`"; then printf "$$lang "; fi; done; fi) - -USE_LANGUAGES=$(shell if test -n "$(USER_LANGUAGES)" -o -n "$(LANGUAGES)"; then LLANGUAGES="$(USER_LANGUAGES)"; else if test -n "$(PO_LANGUAGES)"; then LLANGUAGES="$(PO_LANGUAGES)"; else LLANGUAGES="$(ALL_LANGUAGES)"; fi; fi; for lang in $$LLANGUAGES; do printf "$$lang "; done) - -POFILES=$(shell LANGUAGES="$(PO_LANGUAGES)"; for lang in $$LANGUAGES; do printf "$$lang.po "; done) - -DISTFILES = Makefile.in.in POTFILES.in $(POFILES) -EXTRA_DISTFILES = ChangeLog POTFILES.skip Makevars LANGUAGES - -POTFILES = \ -# This comment gets stripped out - -CATALOGS=$(shell LANGUAGES="$(USE_LANGUAGES)"; for lang in $$LANGUAGES; do printf "$$lang.gmo "; done) - -.SUFFIXES: -.SUFFIXES: .po .pox .gmo .mo .msg .cat - -.po.pox: - $(MAKE) $(GETTEXT_PACKAGE).pot - $(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox - -.po.mo: - $(MSGFMT) -o $@ $< - -.po.gmo: - file=`echo $* | sed 's,.*/,,'`.gmo \ - && rm -f $$file && $(GMSGFMT) -o $$file $< - -.po.cat: - sed -f ../intl/po2msg.sed < $< > $*.msg \ - && rm -f $@ && gencat $@ $*.msg - - -all: all-@USE_NLS@ - -all-yes: $(CATALOGS) -all-no: - -$(GETTEXT_PACKAGE).pot: $(POTFILES) - $(GENPOT) - -install: install-data -install-data: install-data-@USE_NLS@ -install-data-no: all -install-data-yes: all - LANGUAGES="$(USE_LANGUAGES)"; \ - for lang in $$LANGUAGES; do \ - dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $$dir; \ - if test -r $$lang.gmo; then \ - $(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ - echo "installing $$lang.gmo as $$dir/$(GETTEXT_PACKAGE).mo"; \ - else \ - $(INSTALL_DATA) $(srcdir)/$$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ - echo "installing $(srcdir)/$$lang.gmo as" \ - "$$dir/$(GETTEXT_PACKAGE).mo"; \ - fi; \ - if test -r $$lang.gmo.m; then \ - $(INSTALL_DATA) $$lang.gmo.m $$dir/$(GETTEXT_PACKAGE).mo.m; \ - echo "installing $$lang.gmo.m as $$dir/$(GETTEXT_PACKAGE).mo.m"; \ - else \ - if test -r $(srcdir)/$$lang.gmo.m ; then \ - $(INSTALL_DATA) $(srcdir)/$$lang.gmo.m \ - $$dir/$(GETTEXT_PACKAGE).mo.m; \ - echo "installing $(srcdir)/$$lang.gmo.m as" \ - "$$dir/$(GETTEXT_PACKAGE).mo.m"; \ - else \ - true; \ - fi; \ - fi; \ - done - -# Empty stubs to satisfy archaic automake needs -dvi info ctags tags CTAGS TAGS ID: - -# Define this as empty until I found a useful application. -install-exec installcheck: - -uninstall: - LANGUAGES="$(USE_LANGUAGES)"; \ - for lang in $$LANGUAGES; do \ - rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ - rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ - done - -check: all $(GETTEXT_PACKAGE).pot - rm -f missing notexist - srcdir=$(srcdir) $(INTLTOOL_UPDATE) -m - if [ -r missing -o -r notexist ]; then \ - exit 1; \ - fi - -mostlyclean: - rm -f *.pox $(GETTEXT_PACKAGE).pot *.old.po cat-id-tbl.tmp - rm -f .intltool-merge-cache - -clean: mostlyclean - -distclean: clean - rm -f Makefile Makefile.in POTFILES stamp-it - rm -f *.mo *.msg *.cat *.cat.m *.gmo - -maintainer-clean: distclean - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - rm -f Makefile.in.in - -distdir = ../$(PACKAGE)-$(VERSION)/$(subdir) -dist distdir: $(DISTFILES) - dists="$(DISTFILES)"; \ - extra_dists="$(EXTRA_DISTFILES)"; \ - for file in $$extra_dists; do \ - test -f $(srcdir)/$$file && dists="$$dists $(srcdir)/$$file"; \ - done; \ - for file in $$dists; do \ - test -f $$file || file="$(srcdir)/$$file"; \ - ln $$file $(distdir) 2> /dev/null \ - || cp -p $$file $(distdir); \ - done - -update-po: Makefile - $(MAKE) $(GETTEXT_PACKAGE).pot - tmpdir=`pwd`; \ - LANGUAGES="$(USE_LANGUAGES)"; \ - for lang in $$LANGUAGES; do \ - echo "$$lang:"; \ - result="`$(MSGMERGE) -o $$tmpdir/$$lang.new.po $$lang`"; \ - if $$result; then \ - if cmp $(srcdir)/$$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "msgmerge for $$lang.gmo failed!"; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi; \ - done - -Makefile POTFILES: stamp-it - @if test ! -f $@; then \ - rm -f stamp-it; \ - $(MAKE) stamp-it; \ - fi - -stamp-it: Makefile.in.in $(top_builddir)/config.status POTFILES.in - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/Makefile.in CONFIG_HEADERS= CONFIG_LINKS= \ - $(SHELL) ./config.status - -# Tell versions [3.59,3.63) of GNU make not to export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru gtkterm-0.99.7+git9d63182/po/meson.build gtkterm-1.0.1/po/meson.build --- gtkterm-0.99.7+git9d63182/po/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/po/meson.build 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,5 @@ +i18n = import('i18n') + +i18n.gettext(meson.project_name(), + args: '--directory=' + meson.source_root() +) diff -Nru gtkterm-0.99.7+git9d63182/po/POTFILES.in gtkterm-1.0.1/po/POTFILES.in --- gtkterm-0.99.7+git9d63182/po/POTFILES.in 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/po/POTFILES.in 2019-12-18 16:31:37.000000000 +0000 @@ -4,8 +4,10 @@ # Package source files src/buffer.c src/cmdline.c -src/config_terminal_dialog.ui +src/device_monitor.c src/files.c +src/gtkterm.c +src/i18n.c src/interface.c src/logging.c src/macros.c diff -Nru gtkterm-0.99.7+git9d63182/po/zh_CN.po gtkterm-1.0.1/po/zh_CN.po --- gtkterm-0.99.7+git9d63182/po/zh_CN.po 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/po/zh_CN.po 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,701 @@ +# Chinese (China) translation for gtkterm package. +# This file is distributed under the same license as the gtkterm package. +# +# 玉堂白鹤 , 2019. +# +msgid "" +msgstr "" +"Project-Id-Version: \n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2018-01-02 11:53+0800\n" +"PO-Revision-Date: 2019-11-15 15:11+0800\n" +"Language: zh_CN\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Last-Translator: 玉堂白鹤 \n" +"Language-Team: \n" +"X-Generator: Poedit 2.2.4\n" + +#: src/buffer.c:111 +msgid "ERROR : Buffer is not initialized !\n" +msgstr "错误：缓冲区未初始化！\n" + +#: src/cmdline.c:37 +#, c-format +msgid "" +"\n" +"GTKTerm version %s\n" +msgstr "" +"\n" +"GTKTerm 版本 %s\n" + +#: src/cmdline.c:38 +msgid "\t (c) Julien Schmitt\n" +msgstr "\t (c) Julien Schmitt\n" + +#: src/cmdline.c:39 +msgid "" +"\n" +"This program is released under the terms of the GPL V.2\n" +msgstr "" +"\n" +"该程序根据 GPL V.2 的条款发布\n" + +#: src/cmdline.c:40 +msgid "\t ** Use at your own risks ! **\n" +msgstr "\t ** 使用风险自负！ **\n" + +#: src/cmdline.c:41 +msgid "" +"\n" +"Command line options\n" +msgstr "" +"\n" +"命令行选项\n" + +#: src/cmdline.c:42 +msgid "--help or -h : this help screen\n" +msgstr "--help 或 -h：此帮助屏幕\n" + +#: src/cmdline.c:43 +msgid "--config or -c : load configuration\n" +msgstr "--config 或 -c：加载配置\n" + +#: src/cmdline.c:44 +msgid "--port or -p : serial port device (default /dev/ttyS0)\n" +msgstr "--port 或 -p ：串口设备 (默认为 /dev/ttyS0)\n" + +#: src/cmdline.c:45 +msgid "--speed or -s : serial port speed (default 9600)\n" +msgstr "--speed 或 -s ：串口速率 (默认为 9600)\n" + +#: src/cmdline.c:46 +msgid "--bits or -b : number of bits (default 8)\n" +msgstr "--bits 或 -b ：数据位 (默认为 8)\n" + +#: src/cmdline.c:47 +msgid "--stopbits or -t : number of stopbits (default 1)\n" +msgstr "--stopbits or -t ：停止位 (默认为 1)\n" + +#: src/cmdline.c:48 +msgid "--parity or -a : partity (default none)\n" +msgstr "--parity 或 -a ：奇偶校验 (默认为 none)\n" + +#: src/cmdline.c:49 +msgid "--flow or -w : flow control (default none)\n" +msgstr "--flow 或 -w ：数据流控制 (默认为 none)\n" + +#: src/cmdline.c:50 +msgid "--delay or -d : end of line delay in ms (default none)\n" +msgstr "--delay or -d ：行末延迟(ms) (默认 none)\n" + +#: src/cmdline.c:51 +msgid "" +"--char or -r : wait for a special char at end of line (default none)\n" +msgstr "--char or -r : 在行尾等待特殊字符 (默认为 none)\n" + +#: src/cmdline.c:52 +msgid "--file or -f : default file to send (default none)\n" +msgstr "--file or -f ：要发送的默认文件 (默认为 none)\n" + +#: src/cmdline.c:53 +msgid "" +"--rts_time_before or -x : for rs485, time in ms before transmit with " +"rts on\n" +msgstr "" + +#: src/cmdline.c:54 +msgid "" +"--rts_time_after or -y : for rs485, time in ms after transmit with rts " +"on\n" +msgstr "" + +#: src/cmdline.c:55 +msgid "--echo or -e : switch on local echo\n" +msgstr "--echo 或 -e ：打开本地回显\n" + +#: src/cmdline.c:160 +msgid "Misunderstood command line option\n" +msgstr "错误理解命令行选项\n" + +#: src/config_terminal_dialog.ui:67 +msgid "Terminal Font" +msgstr "终端字体" + +#: src/config_terminal_dialog.ui:96 +msgid "Scrollback Lines" +msgstr "回滚行数" + +#: src/config_terminal_dialog.ui:124 src/config_terminal_dialog.ui:141 +msgid "Background color" +msgstr "背景颜色" + +#: src/config_terminal_dialog.ui:152 src/config_terminal_dialog.ui:169 +msgid "Text color" +msgstr "文本颜色" + +#: src/config_terminal_dialog.ui:180 +msgid "Block cursor" +msgstr "方块光标" + +#: src/files.c:77 +msgid "Send RAW File" +msgstr "发送 RAW 文件" + +#: src/files.c:96 +msgid "Error opening file\n" +msgstr "打开文件出错\n" + +#: src/files.c:110 +#, c-format +msgid "%s : transfer in progress..." +msgstr "%s ：传输中..." + +#: src/files.c:128 +msgid "Cancel" +msgstr "取消" + +#: src/files.c:143 +#, c-format +msgid "Cannot read file %s: %s\n" +msgstr "无法读取文件 %s: %s\n" + +#: src/files.c:178 +msgid "Error sending file\n" +msgstr "发送文件出错\n" + +#: src/files.c:206 +#, c-format +msgid "Error sending file: %s\n" +msgstr "发送文件出错：%s\n" + +#: src/files.c:292 +msgid "Save RAW File" +msgstr "保存 RAW 文件" + +#: src/files.c:311 +msgid "File error\n" +msgstr "文件错误\n" + +#: src/files.c:322 src/logging.c:68 src/logging.c:123 +#, c-format +msgid "Cannot open file %s: %s\n" +msgstr "无法打开文件 %s: %s\n" + +#: src/interface.c:136 +msgid "_File" +msgstr "文件(_F)" + +#: src/interface.c:137 +msgid "_Edit" +msgstr "编辑(_E)" + +#: src/interface.c:138 +msgid "_Log" +msgstr "日志(_L)" + +#: src/interface.c:139 +msgid "_Configuration" +msgstr "配置(_C)" + +#: src/interface.c:140 +msgid "Control _signals" +msgstr "控制信号(_S)" + +#: src/interface.c:141 +msgid "_View" +msgstr "视图(_V)" + +#: src/interface.c:142 +msgid "Hexadecimal _chars" +msgstr "十六进制字符(_C)" + +#: src/interface.c:143 +msgid "_Help" +msgstr "帮助(_F)" + +#: src/interface.c:147 +msgid "_Clear screen" +msgstr "清除屏幕(_C)" + +#: src/interface.c:148 +msgid "Send _RAW file" +msgstr "发送 RAW 文件(_R)" + +#: src/interface.c:149 +msgid "_Save RAW file" +msgstr "保存 RAW 文件(_S)" + +#: src/interface.c:157 +msgid "To file..." +msgstr "至文件..." + +#: src/interface.c:163 +msgid "_Port" +msgstr "端口(_P)" + +#: src/interface.c:164 +msgid "_Main window" +msgstr "主窗口(_M)" + +#: src/interface.c:165 +msgid "_Macros" +msgstr "宏(_M)" + +#: src/interface.c:166 +msgid "_Load configuration" +msgstr "加载配置(_L)" + +#: src/interface.c:167 +msgid "_Save configuration" +msgstr "保存配置(_S)" + +#: src/interface.c:168 +msgid "_Delete configuration" +msgstr "删除配置(_D)" + +#: src/interface.c:171 +msgid "Send break" +msgstr "发送中断" + +#: src/interface.c:172 +msgid "_Open Port" +msgstr "打开端口(_O)" + +#: src/interface.c:173 +msgid "_Close Port" +msgstr "关闭端口(_C)" + +#: src/interface.c:174 +msgid "Toggle DTR" +msgstr "切换 DTR" + +#: src/interface.c:175 +msgid "Toggle RTS" +msgstr "切换 RTS" + +#: src/interface.c:184 +msgid "Local _echo" +msgstr "本地回显(_E)" + +#: src/interface.c:185 +msgid "_CR LF auto" +msgstr "CR LF 自动(_C)" + +#: src/interface.c:188 +msgid "Show _index" +msgstr "显示索引(_I)" + +#: src/interface.c:189 +msgid "_Send hexadecimal data" +msgstr "发送十六进制数据(_S)" + +#: src/interface.c:194 +msgid "_ASCII" +msgstr "ASCII(_A)" + +#: src/interface.c:195 +msgid "_Hexadecimal" +msgstr "十六进制(_H)" + +#: src/interface.c:391 +msgid "Resume" +msgstr "恢复" + +#: src/interface.c:536 +msgid "Hexadecimal data to send (separator : ';' or space) : " +msgstr "要发送的十六进制数据(分隔符 : ';' 或空格) : " + +#: src/interface.c:713 +msgid "" +"GTKTerm is a simple GTK+ terminal used to communicate with the serial port." +msgstr "GTKTerm 是一个简单的 GTK+ 终端，用于与串行端口进行通信。" + +#: src/interface.c:753 +msgid "Break signal sent!" +msgstr "中断信号发送！" + +#: src/interface.c:849 +msgid "0 byte(s) sent!" +msgstr "已发送 0 个字节！" + +#: src/interface.c:863 +msgid "Improper formatted hex input, 0 bytes sent!" +msgstr "十六进制输入格式不正确，已发送 0 个字节！" + +#: src/interface.c:874 +#, c-format +msgid "%d byte(s) sent!" +msgstr "已发送 %d 个字节！" + +#: src/logging.c:49 +msgid "Filename error\n" +msgstr "文件名错误\n" + +#: src/logging.c:88 +msgid "Log file selection" +msgstr "日志文件选择" + +#: src/logging.c:184 +msgid "Failed to log data\n" +msgstr "记录数据失败\n" + +#: src/macros.c:144 +#, c-format +msgid "Macro \"%s\" sent !" +msgstr "宏 \"%s\"已发送！" + +#: src/macros.c:275 +msgid "Shortcut" +msgstr "快捷键" + +#: src/macros.c:432 +msgid "" +"The \"action\" field of a macro is the data to be sent on the port. Text can " +"be entered, but also special chars, like \\n, \\t, \\r, etc. You can also " +"enter hexadecimal data preceded by a '\\'. The hexadecimal data should not " +"begin with a letter (eg. use \\0FF and not \\FF)\n" +"Examples :\n" +"\t\"Hello\\n\" sends \"Hello\" followed by a Line Feed\n" +"\t\"Hello\\0A\" does the same thing but the LF is entered in hexadecimal" +msgstr "" +"宏的 \"action\" 字段是要在端口上发送的数据。 可以输入文本，但也可以输入特殊字" +"符，例如\\n，\\t，\\r，等。您还可以输入以 '\\' 头的十六进制数据。 十六进制数" +"据不应以字母开头(例如，使用 \\0FF 而不是\\FF)\n" +"例如 ：\n" +"\t\"Hello\\n\" 发送“ Hello”，后跟换行\n" +"\t\"Hello\\0A\" 执行相同的操作，但是 LF 以十六进制输入" + +#: src/macros.c:452 +msgid "Configure Macros" +msgstr "配置宏" + +#: src/macros.c:489 +msgid "_Add" +msgstr "添加(_A)" + +#: src/macros.c:493 +msgid "_Delete" +msgstr "删除(_D)" + +#: src/macros.c:497 +msgid "_Capture Shortcut" +msgstr "捕捉快捷键" + +#: src/parsecfg.c:354 +#, c-format +msgid "Cannot open configuration file `%s'.\n" +msgstr "无法打开配置文件 `%s'.\n" + +#: src/parsecfg.c:357 +#, c-format +msgid "Cannot create configuration file `%s'.\n" +msgstr "无法创建配置文件 `%s'.\n" + +#: src/parsecfg.c:360 +#, c-format +msgid "" +"%s(%d): %s\n" +"Syntax error\n" +msgstr "" +"%s(%d): %s\n" +"语法错误\n" + +#: src/parsecfg.c:363 +#, c-format +msgid "" +"%s(%d): %s\n" +"Unrecognized parameter\n" +msgstr "" +"%s(%d): %s\n" +"无法识别的参数\n" + +#: src/parsecfg.c:366 +#, c-format +msgid "" +"%s(%d): %s\n" +"Internal error\n" +msgstr "" +"%s(%d): %s\n" +"内部错误\n" + +#: src/parsecfg.c:369 +#, c-format +msgid "" +"%s(%d): %s\n" +"Invalid number\n" +msgstr "" +"%s(%d): %s\n" +"无效数值\n" + +#: src/parsecfg.c:372 +#, c-format +msgid "" +"%s(%d): %s\n" +"Out of range\n" +msgstr "" +"%s(%d): %s\n" +"超出范围\n" + +#: src/parsecfg.c:375 +#, c-format +msgid "" +"%s(%d): %s\n" +"Cannot allocate memory.\n" +msgstr "" +"%s(%d): %s\n" +"无法分配内存。\n" + +#: src/parsecfg.c:378 +#, c-format +msgid "" +"%s(%d): %s\n" +"It must be specified TRUE or FALSE.\n" +msgstr "" +"%s(%d): %s\n" +"必须将其指定为 TRU E或 FALSE。\n" + +#: src/parsecfg.c:381 +#, c-format +msgid "" +"%s(%d): %s\n" +"The section name is already used.\n" +msgstr "" +"%s(%d): %s\n" +"这个配置部分名称已被使用。\n" + +#: src/parsecfg.c:384 +#, c-format +msgid "" +"%s(%d)\n" +"There is no closing brace.\n" +msgstr "" +"%s(%d)\n" +"没有右括号。\n" + +#: src/parsecfg.c:389 +#, c-format +msgid "" +"%s(%d): %s\n" +"Unexplained error\n" +msgstr "" +"%s(%d): %s\n" +"未知错误\n" + +#: src/serial.c:154 +#, c-format +msgid "Cannot open %s: %s\n" +msgstr "无法打开 %s: %s\n" + +#: src/serial.c:165 +msgid "" +"Cannot lock port! The serial port may currently be in use by another " +"program.\n" +msgstr "无法锁定端口！ 串行端口当前可能正在被另一个程序使用。\n" + +#: src/serial.c:232 +msgid "Arbitrary baud rates not supported" +msgstr "不支持任意波特率" + +#: src/serial.c:346 src/serial.c:392 +msgid "Control signals read" +msgstr "读取控制信号" + +#: src/serial.c:358 +msgid "DTR write" +msgstr "写入 DTR" + +#: src/serial.c:368 +msgid "RTS write" +msgstr "写入 RTS" + +#: src/serial.c:446 +msgid "No open port" +msgstr "无打开的端口" + +#: src/term_config.c:185 +msgid "" +"No serial devices found!\n" +"\n" +"Searched the following paths:\n" +"\t/dev/ttyS*\n" +"\t/dev/tts/*\n" +"\t/dev/ttyUSB*\n" +"\t/dev/usb/tts/*\n" +"\n" +"Enter a different device path in the 'Port' box.\n" +msgstr "" +"找不到串行设备！\n" +"\n" +"搜索以下路径：\n" +"\t/dev/ttyS*\n" +"\t/dev/tts/*\n" +"\t/dev/ttyUSB*\n" +"\t/dev/usb/tts/*\n" +"\n" +"在“端口”框中输入其他设备路径。\n" + +#: src/term_config.c:194 +msgid "Configuration" +msgstr "配置" + +#: src/term_config.c:198 +msgid "Serial port" +msgstr "串行端口" + +#: src/term_config.c:204 +msgid "Port:" +msgstr "端口：" + +#: src/term_config.c:206 +msgid "Baud Rate:" +msgstr "波特率:" + +#: src/term_config.c:208 +msgid "Parity:" +msgstr "奇偶校验:" + +#: src/term_config.c:354 +msgid "Bits:" +msgstr "数据位:" + +#: src/term_config.c:356 +msgid "Stopbits:" +msgstr "停止位:" + +#: src/term_config.c:358 +msgid "Flow control:" +msgstr "数据流控制:" + +#: src/term_config.c:409 +msgid "Advanced Configuration Options" +msgstr "高级配置选项" + +#: src/term_config.c:414 +msgid "ASCII file transfer" +msgstr "ASCII 文件传输" + +#: src/term_config.c:420 +msgid "End of line delay (milliseconds):" +msgstr "行末延迟 (毫秒)：" + +#: src/term_config.c:436 +msgid "Wait for this special character before passing to next line:" +msgstr "传递到下一行之前等待这个特殊字符:" + +#: src/term_config.c:449 +msgid "RS485 half-duplex parameters (RTS signal used to send)" +msgstr "RS485 半双工参数(用于发送RTS信号)" + +#: src/term_config.c:456 +msgid "Time with RTS 'on' before transmit (milliseconds):" +msgstr "" + +#: src/term_config.c:458 +msgid "Time with RTS 'on' after transmit (milliseconds):" +msgstr "" + +#: src/term_config.c:577 +msgid "Load configuration" +msgstr "加载配置" + +#: src/term_config.c:587 +msgid "Delete configuration" +msgstr "删除配置" + +#: src/term_config.c:617 +msgid "Cannot read configuration file!\n" +msgstr "无法读取配置文件！\n" + +#: src/term_config.c:623 +msgid "Configurations" +msgstr "配置" + +#: src/term_config.c:690 +msgid "Save configuration" +msgstr "保存配置" + +#: src/term_config.c:702 +msgid "Configuration name: " +msgstr "配置名称： " + +#: src/term_config.c:753 +msgid "Cannot overwrite section!" +msgstr "无法覆盖该配置部分！" + +#: src/term_config.c:758 +msgid "Cannot read configuration file!" +msgstr "无法读取配置文件！" + +#: src/term_config.c:768 +#, c-format +msgid "Configuration [%s] saved\n" +msgstr "配置 [%s] 已保存\n" + +#: src/term_config.c:799 +#, c-format +msgid "" +"Section [%s] already exists.\n" +"\n" +"Do you want to overwrite it ?" +msgstr "" +" [%s] 配置部分已存在。\n" +"\n" +"您要覆盖它吗？" + +#: src/term_config.c:858 +msgid "Cannot delete section!" +msgstr "无法删除该配置部分！" + +#: src/term_config.c:1031 +#, c-format +msgid "No section \"%s\" in configuration file\n" +msgstr "配置文件中无 \"%s\" 部分\n" + +#: src/term_config.c:1076 +#, c-format +msgid "Baudrate %d may not be supported by all hardware" +msgstr "不是所有硬件都支持波特率 %d" + +#: src/term_config.c:1083 +#, c-format +msgid "" +"Invalid number of stop-bits: %d\n" +"Falling back to default number of stop-bits number: %d\n" +msgstr "" +"无效的停止位：%d\n" +"退回到默认的停止位：%d\n" + +#: src/term_config.c:1091 +#, c-format +msgid "" +"Invalid number of bits: %d\n" +"Falling back to default number of bits: %d\n" +msgstr "" +"无效的数据位：%d\n" +"退回到默认的数据位：%d\n" + +#: src/term_config.c:1099 +#, c-format +msgid "" +"Invalid delay: %d ms\n" +"Falling back to default delay: %d ms\n" +msgstr "" +"无效的延迟： %d ms\n" +"退回到默认延迟：%d ms\n" +"\n" + +#: src/term_config.c:1129 +#, c-format +msgid "" +"Configuration file (%s) with\n" +"[default] configuration has been created.\n" +msgstr "" +"已创建包含 [default] 的\n" +"配置文件 (%s) 。\n" + +#: src/term_config.c:1375 +#, c-format +msgid "Cannot find section %s\n" +msgstr "找不到 %s 配置部分\n" diff -Nru gtkterm-0.99.7+git9d63182/README.md gtkterm-1.0.1/README.md --- gtkterm-0.99.7+git9d63182/README.md 2017-11-17 16:09:56.000000000 +0000 +++ gtkterm-1.0.1/README.md 2019-12-18 16:31:37.000000000 +0000 @@ -1,71 +1,84 @@ -# GTKTerm : a GTK+ serial port terminal -Original Code by: Julien Schmitt +# GTKTerm: A GTK+ Serial Port Terminal - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. +[![CircleCI Badge](https://circleci.com/gh/Jeija/gtkterm.svg?style=shield)](https://circleci.com/gh/Jeija/gtkterm) + - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. +GTKTerm is a simple, graphical serial port terminal emulator for Linux and possibly other POSIX-compliant operating systems. It can be used to communicate with all kinds of devices with a serial interface, such as embedded computers, microcontrollers, modems, GPS receivers, CNC machines and more. - You should have received a copy of the GNU General Public License - along with this program. If not, see . +

+ +

+ +## Usage +### Keyboard Shortcuts +As GTKTerm is often used like a terminal emulator, +the shortcut keys are assigned to ``, rather than just ``. This allows the user to send keystrokes of the form `X` and not have GTKTerm intercept them. + +Key Combination | Effect +---:|--- +`L` | Clear screen +`R` | Send file +`Q` | Quit +`S` | Configure port +`V` | Paste +`C` | Copy +`B` | Send break +F5 | Open Port +F6 | Close Port +F7 | Toggle DTR +F8 | Toggle RTS +### Command Line Options +See `man gtkterm` or `gtkterm --help` for more information on available command line interface options. -### Command line options +### Notes on RS485: +The RS485 flow control is a software user-space emulation and therefore may not work for all configurations (won't respond quickly enough). If this is the case for your setup, you will need to either use a dedicated RS232 to RS485 converter, or look for a kernel level driver. This is an inherent limitation to user space programs. - --help or -h : this help screen - --config or -c : load configuration - --port or -p : serial port device (default /dev/ttyS0) - --speed or -s : serial port speed (default 9600) - --bits or -b : number of bits (default 8) - --stopbits or -t : number of stopbits (default 1) - --parity or -a : parity (default none) - --flow or -w : flow control (default none) - --delay or -d : end of line delay in ms (default none) - --char or -r : wait for a special char at end of line (default none) - --file or -f : default file to send (default none) - --echo or -e : switch on local echo - -### Keyboard shortcuts -As Gtkterm is often used like a terminal emulator, -the shortcut keys are assigned to ``, rather than just ``. This allows the user to send keystrokes of the form `X` and not have Gtkterm intercept them. - - L -- Clear screen - R -- Send file - Q -- Quit - S -- Configure port - V -- Paste - C -- Copy - B -- Send break - F5 -- Open Port - F6 -- Close Port - F7 -- Toggle DTR - F8 -- Toggle RTS +### Scriptability with Signals +Some microcontrollers and other embedded devices are flashed using the same serial interface that is also used for outputting debug information. To facilitate rapid development on these platforms, GTKTerm supports the following UNIX signals: -#### NOTES on RS485: -The RS485 flow control is a software user-space emulation and therefore may not work for all configurations (won't respond quickly enough). If this is the case for your setup, you will need to either use a dedicated RS232 to RS485 converter, or look for a kernel level driver. This is an inherent limitation to user space programs. +Signal | Action | Usage Example +---:|:---:|--- +`SIGUSR1` | Open Port | `killall -USR1 gtkterm` +`SIGUSR2` | Close Port | `killall -USR2 gtkterm` + +You may find it useful to send these signals in your own firmware flashing scripts. -### Building: -GtkTerm has a few dependencies- +## Installation +GTKTerm has a few dependencies- * Gtk+3.0 (version 3.12 or higher) * vte (version 0.40 or higher) * intltool (version 0.40.0 or higher) +* libgudev (version 229 or higher) Once these dependencies are installed, most people should simply run: - ./configure - make - # And to install: - make install + meson build + ninja -C build + +To install GTKTerm system-wide, run: -If you wish to install Gtkterm someplace other than the default directory, use: + ninja -C build install + gtk-update-icon-cache - ./configure --prefix=/install/directory +If you wish to install GTKTerm someplace other than the default directory, e.g. in `/usr`, use: + + meson build -Dprefix=/usr Then build and install as usual. - See `INSTALL` for more detailed build and install options. +## License +Original Code by: Julien Schmitt + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . Binary files /tmp/tmp55KcXh/5rkG3eay5L/gtkterm-0.99.7+git9d63182/screenshot.png and /tmp/tmp55KcXh/zNs5d03fAp/gtkterm-1.0.1/screenshot.png differ diff -Nru gtkterm-0.99.7+git9d63182/src/buffer.c gtkterm-1.0.1/src/buffer.c --- gtkterm-0.99.7+git9d63182/src/buffer.c 2017-11-17 16:09:58.000000000 +0000 +++ gtkterm-1.0.1/src/buffer.c 2019-12-18 16:31:37.000000000 +0000 @@ -26,14 +26,19 @@ #include #include +#include +#define TIMESTAMP_SIZE 50 + +extern gboolean timestamp_on; +static int need_to_write_timestamp = 0; static char *buffer = NULL; static char *current_buffer; static unsigned int pointer; static int cr_received = 0; char overlapped; -void (*write_func)(char *, unsigned int) = NULL; +void (*write_func)(const char *, unsigned int) = NULL; void (*clear_func)(void) = NULL; void create_buffer(void) @@ -53,58 +58,106 @@ return; } -void put_chars(char *chars, unsigned int size, gboolean crlf_auto) -{ - char *characters; +//assumes that buffer always has space for timestamp (TIMESTAMP_SIZE) +//buffer points to location where timestamp will be inserted +unsigned int insert_timestamp(char *buffer) +{ + unsigned int size = 0; + + if(timestamp_on) + { + char buf[TIMESTAMP_SIZE]; + struct timespec ts; + int d,h,m,s,x; + timespec_get(&ts, TIME_UTC); + d = (ts.tv_sec / (3600 * 24)); + h = (ts.tv_sec / 3600) % 24; + m = (ts.tv_sec / 60 ) % 60; + s = ts.tv_sec % 60; + x = ts.tv_nsec / 1000000; + snprintf(buf, TIMESTAMP_SIZE - 1, "[%d.%02uh.%02um.%02us.%03u] " + , d, h, m, s, x ); + strcpy(buffer, buf); + size = strlen(buf); + } + return size; +} + +void put_chars(const char *chars, unsigned int size, gboolean crlf_auto) +{ + // buffer must still be valid after cr conversion or adding timestamp + // only pointer is copied below + char out_buffer[(BUFFER_RECEPTION*2) + TIMESTAMP_SIZE]; + const char *characters; /* If the auto CR LF mode on, read the buffer to add \r before \n */ - if(crlf_auto) + if(crlf_auto || timestamp_on) { - /* BUFFER_RECEPTION*2 for worst case scenario, all \n or \r chars */ - char out_buffer[BUFFER_RECEPTION*2]; int i, out_size = 0; for (i=0; i BUFFER_SIZE) { characters = chars + (size - BUFFER_SIZE); @@ -154,9 +209,9 @@ } } -void write_buffer_with_func(void (*func)(char *, unsigned int)) +void write_buffer_with_func(void (*func)(const char *, unsigned int)) { - void (*write_func_backup)(char *, unsigned int); + void (*write_func_backup)(const char *, unsigned int); write_func_backup = write_func; write_func = func; @@ -189,13 +244,12 @@ clear_func = NULL; } -void set_display_func(void (*func)(char *, unsigned int)) +void set_display_func(void (*func)(const char *, unsigned int)) { write_func = func; } -void unset_display_func(void (*func)(char *, unsigned int)) +void unset_display_func(void (*func)(const char *, unsigned int)) { write_func = NULL; } - diff -Nru gtkterm-0.99.7+git9d63182/src/buffer.h gtkterm-1.0.1/src/buffer.h --- gtkterm-0.99.7+git9d63182/src/buffer.h 2017-11-17 16:09:58.000000000 +0000 +++ gtkterm-1.0.1/src/buffer.h 2019-12-18 16:31:37.000000000 +0000 @@ -23,13 +23,13 @@ void create_buffer(void); void delete_buffer(void); -void put_chars(char *, unsigned int, gboolean); +void put_chars(const char *, unsigned int, gboolean); void clear_buffer(void); void write_buffer(void); -void set_display_func(void (*func)(char *, unsigned int)); -void unset_display_func(void (*func)(char *, unsigned int)); +void set_display_func(void (*func)(const char *, unsigned int)); +void unset_display_func(void (*func)(const char *, unsigned int)); void set_clear_func(void (*func)(void)); void unset_clear_func(void (*func)(void)); -void write_buffer_with_func(void (*func)(char *, unsigned int)); +void write_buffer_with_func(void (*func)(const char *, unsigned int)); #endif diff -Nru gtkterm-0.99.7+git9d63182/src/cmdline.c gtkterm-1.0.1/src/cmdline.c --- gtkterm-0.99.7+git9d63182/src/cmdline.c 2017-11-17 16:09:58.000000000 +0000 +++ gtkterm-1.0.1/src/cmdline.c 2019-12-18 16:31:37.000000000 +0000 @@ -53,6 +53,8 @@ i18n_printf(_("--rts_time_before or -x : for rs485, time in ms before transmit with rts on\n")); i18n_printf(_("--rts_time_after or -y : for rs485, time in ms after transmit with rts on\n")); i18n_printf(_("--echo or -e : switch on local echo\n")); + i18n_printf(_("--disable-port-lock or -L: does not lock serial port. Allows to send to serial port from different terminals\n")); + i18n_printf(_(" Note: incomming data are displayed randomly on only one terminal\n")); i18n_printf("\n"); } @@ -74,6 +76,7 @@ {"char", 1, 0, 'r'}, {"help", 0, 0, 'h'}, {"echo", 0, 0, 'e'}, + {"disable-port-lock", 0, 0, 'L'}, {"rts_time_before", 1, 0, 'x'}, {"rts_time_after", 1, 0, 'y'}, {"config", 1, 0, 'c'}, @@ -85,7 +88,7 @@ while(1) { - c = getopt_long (argc, argv, "s:a:t:b:f:p:w:d:r:hec:x:y:", long_options, &option_index); + c = getopt_long (argc, argv, "s:a:t:b:f:p:w:d:r:heLc:x:y:", long_options, &option_index); if(c == -1) break; @@ -144,6 +147,10 @@ config.echo = TRUE; break; + case 'L': + config.disable_port_lock = TRUE; + break; + case 'x': config.rs485_rts_time_before_transmit = atoi(optarg); break; @@ -164,4 +171,3 @@ Verify_configuration(); return 0; } - diff -Nru gtkterm-0.99.7+git9d63182/src/config_terminal_dialog.ui gtkterm-1.0.1/src/config_terminal_dialog.ui --- gtkterm-0.99.7+git9d63182/src/config_terminal_dialog.ui 2017-11-17 16:09:58.000000000 +0000 +++ gtkterm-1.0.1/src/config_terminal_dialog.ui 1970-01-01 00:00:00.000000000 +0000 @@ -1,216 +0,0 @@ - - - - - - 100 - 3000 - 200 - 1 - 10 - - - 290 - 245 - False - False - True - center-on-parent - True - dialog - center - - - False - center - center - vertical - 2 - - - False - - - Close - True - True - True - bottom - - - True - True - 0 - - - - - False - False - 1 - - - - - True - False - center - start - 5 - 6 - 12 - True - - - True - False - Terminal Font - 0.01 - 1 - - - - - - 0 - 0 - - - - - True - True - True - Sans 12 - - - - 1 - 0 - - - - - True - False - Scrollback Lines - 1 - - - - - - 0 - 1 - - - - - True - True - 5 - cfg_scrollback_lines - 100 - - - 1 - 1 - - - - - True - False - Background color - 1 - - - - - - 0 - 4 - - - - - True - True - True - start - Background color - - - 1 - 4 - - - - - True - False - Text color - 1 - - - - - - 0 - 3 - - - - - True - True - True - start - Text color - - - 1 - 3 - - - - - True - False - Block cursor - end - 1 - - - - - - 0 - 2 - - - - - True - True - start - center - True - True - - - 1 - 2 - - - - - False - True - 0 - - - - - - diff -Nru gtkterm-0.99.7+git9d63182/src/device_monitor.c gtkterm-1.0.1/src/device_monitor.c --- gtkterm-0.99.7+git9d63182/src/device_monitor.c 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/src/device_monitor.c 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,82 @@ +/***********************************************************************/ +/* device_mintor.h */ +/* --------- */ +/* GTKTerm Software */ +/* (c) Julien Schmitt */ +/* */ +/* ------------------------------------------------------------------- */ +/* */ +/* Purpose */ +/* Monitor device to autoreconnect */ +/* Written by Kevin Picot - picotk27@gmail.com */ +/* */ +/***********************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "interface.h" + +extern struct configuration_port config; + +static inline void device_monitor_status(const bool connected) +{ + if (connected) + interface_open_port(); + else + interface_close_port(); +} + +static inline void device_monitor_handle(const char *action) +{ + if (strcmp(action, "remove") == 0) + device_monitor_status(false); + else if (strcmp(action, "add") == 0) + device_monitor_status(true); +} + +void event_udev(GUdevClient *client, const gchar *action, GUdevDevice *device) +{ + + if (!device || !action) + return; + + if (!g_udev_device_get_device_file(device)) + return; + + const gchar *name = config.port; + + if (strcmp(g_udev_device_get_device_file(device), name) == 0) + device_monitor_handle(action); +} + +extern void device_monitor_start(void) +{ + + const gchar *const subsystems[] = {NULL, NULL}; + + /* Initial check */ + GUdevClient *udev_client = g_udev_client_new(subsystems); + + if (g_udev_client_query_by_device_file(udev_client, config.port) == NULL) { + device_monitor_status(false); + } else { + device_monitor_status(true); + } + + /* Monitor device */ + g_signal_connect(G_OBJECT(udev_client), "uevent", + G_CALLBACK(event_udev), NULL); +} diff -Nru gtkterm-0.99.7+git9d63182/src/device_monitor.h gtkterm-1.0.1/src/device_monitor.h --- gtkterm-0.99.7+git9d63182/src/device_monitor.h 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/src/device_monitor.h 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,20 @@ +/***********************************************************************/ +/* device_mintor.h */ +/* --------- */ +/* GTKTerm Software */ +/* (c) Julien Schmitt */ +/* */ +/* ------------------------------------------------------------------- */ +/* */ +/* Purpose */ +/* Monitor device to autoreconnect */ +/* Written by Kevin Picot - picotk27@gmail.com */ +/* */ +/***********************************************************************/ + +#ifndef DEV_MON_H_ +#define DEV_MON_H_ + +extern void device_monitor_start(void); + +#endif diff -Nru gtkterm-0.99.7+git9d63182/src/gicon.xml gtkterm-1.0.1/src/gicon.xml --- gtkterm-0.99.7+git9d63182/src/gicon.xml 2017-11-17 16:09:58.000000000 +0000 +++ gtkterm-1.0.1/src/gicon.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ - - - - ../icon/gtkterm_small.png - - diff -Nru gtkterm-0.99.7+git9d63182/src/gresource.xml gtkterm-1.0.1/src/gresource.xml --- gtkterm-0.99.7+git9d63182/src/gresource.xml 2017-11-17 16:09:58.000000000 +0000 +++ gtkterm-1.0.1/src/gresource.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ - - - - config_terminal_dialog.ui - - diff -Nru gtkterm-0.99.7+git9d63182/src/gtkterm.c gtkterm-1.0.1/src/gtkterm.c --- gtkterm-0.99.7+git9d63182/src/gtkterm.c 2017-11-17 16:09:58.000000000 +0000 +++ gtkterm-1.0.1/src/gtkterm.c 2019-12-18 16:31:37.000000000 +0000 @@ -28,6 +28,8 @@ #include "buffer.h" #include "macros.h" #include "auto_config.h" +#include "device_monitor.h" +#include "user_signals.h" #include #include @@ -55,6 +57,7 @@ } Config_port(); + ConfigFlags(); message = get_port_string(); Set_window_title(message); @@ -65,6 +68,10 @@ set_view(ASCII_VIEW); + device_monitor_start(); + + user_signals_catch(); + gtk_main(); delete_buffer(); diff -Nru gtkterm-0.99.7+git9d63182/src/interface.c gtkterm-1.0.1/src/interface.c --- gtkterm-0.99.7+git9d63182/src/interface.c 2017-11-17 16:09:59.000000000 +0000 +++ gtkterm-1.0.1/src/interface.c 2019-12-18 16:31:37.000000000 +0000 @@ -12,6 +12,11 @@ /* ChangeLog */ /* (All changes by Julien Schmitt except when explicitly written) */ /* */ +/* - 1.01 : The put_hexadecimal partly function rewritten. */ +/* The vte_terminal_get_cursor_position function does */ +/* not return always the actual column. */ +/* Now it uses an internal column-index (virt_col_pos).*/ +/* (Willem van den Akker) */ /* - 0.99.7 : Changed keyboard shortcuts to */ /* (Ken Peek) */ /* - 0.99.6 : Added scrollbar and copy/paste (Zach Davis) */ @@ -78,6 +83,7 @@ guint id; gboolean echo_on; gboolean crlfauto_on; +gboolean timestamp_on = 0; GtkWidget *StatusBar; GtkWidget *signals[6]; static GtkWidget *Hex_Box; @@ -97,11 +103,14 @@ GtkTextBuffer *buffer; GtkTextIter iter; +extern struct configuration_port config; + /* Variables for hexadecimal display */ static gint bytes_per_line = 16; static gchar blank_data[128]; static guint total_bytes; static gboolean show_index = FALSE; +static guint virt_col_pos = 0; /* Local functions prototype */ void signals_send_break_callback(GtkAction *action, gpointer data); @@ -114,6 +123,7 @@ gboolean control_signals_read(void); void echo_toggled_callback(GtkAction *action, gpointer data); void CR_LF_auto_toggled_callback(GtkAction *action, gpointer data); +void timestamp_toggled_callback(GtkAction *action, gpointer data); void view_radio_callback(GtkAction *action, gpointer data); void view_hexadecimal_chars_radio_callback(GtkAction* action, gpointer data); void view_index_toggled_callback(GtkAction *action, gpointer data); @@ -128,7 +138,6 @@ void edit_paste_callback(GtkAction *action, gpointer data); void edit_select_all_callback(GtkAction *action, gpointer data); - /* Menu */ const GtkActionEntry menu_entries[] = { @@ -183,6 +192,7 @@ /* Configuration Menu */ {"LocalEcho", NULL, N_("Local _echo"), NULL, NULL, G_CALLBACK(echo_toggled_callback), FALSE}, {"CRLFauto", NULL, N_("_CR LF auto"), NULL, NULL, G_CALLBACK(CR_LF_auto_toggled_callback), FALSE}, + {"Timestamp", NULL, N_("Timestamp"), NULL, NULL, G_CALLBACK(timestamp_toggled_callback), FALSE}, /* View Menu */ {"ViewIndex", NULL, N_("Show _index"), NULL, NULL, G_CALLBACK(view_index_toggled_callback), FALSE}, @@ -231,6 +241,7 @@ " " " " " " + " " " " " " " " @@ -325,6 +336,7 @@ gtk_action_set_sensitive(show_index_action, TRUE); gtk_action_set_sensitive(hex_chars_action, TRUE); total_bytes = 0; + virt_col_pos = 0; set_display_func(put_hexadecimal); break; default: @@ -375,6 +387,23 @@ configure_crlfauto(crlfauto_on); } +void Set_timestamp(gboolean timestamp) +{ + GtkAction *action; + + timestamp_on = timestamp; + + action = gtk_action_group_get_action(action_group, "Timestamp"); + if(action) + gtk_toggle_action_set_active(GTK_TOGGLE_ACTION(action), timestamp_on); +} + +void timestamp_toggled_callback(GtkAction *action, gpointer data) +{ + timestamp_on = gtk_toggle_action_get_active (GTK_TOGGLE_ACTION(action)); + config.timestamp = timestamp_on ? TRUE : FALSE; +} + void toggle_logging_pause_resume(gboolean currentlyLogging) { GtkAction *action; @@ -445,7 +474,7 @@ g_signal_connect(GTK_WIDGET(Fenetre), "destroy", (GCallback)gtk_main_quit, NULL); g_signal_connect(GTK_WIDGET(Fenetre), "delete_event", (GCallback)gtk_main_quit, NULL); - Set_window_title("GtkTerm"); + Set_window_title("GTKTerm"); main_vbox = gtk_box_new(GTK_ORIENTATION_VERTICAL, 0); gtk_container_add(GTK_CONTAINER(Fenetre), main_vbox); @@ -590,9 +619,7 @@ { static gchar data[128]; static gchar data_byte[6]; - static guint bytes; - glong column, row; - + static gchar buffer[128]; gint i = 0; if(size == 0) @@ -601,38 +628,30 @@ while(i < size) { while(gtk_events_pending()) gtk_main_iteration(); - vte_terminal_get_cursor_position(VTE_TERMINAL(display), &column, &row); - - if(show_index) - { - if(column == 0) - /* First byte on line */ - { - sprintf(data, "%6d: ", total_bytes); - vte_terminal_feed(VTE_TERMINAL(display), data, strlen(data)); - bytes = 0; - } - } - else - { - if(column == 0) - bytes = 0; - } /* Print hexadecimal characters */ data[0] = 0; - while(bytes < bytes_per_line && i < size) + while(virt_col_pos < bytes_per_line && i < size) { gint avance=0; gchar ascii[1]; + if(show_index) + { + /* First byte on line */ + if(virt_col_pos == 0) + { + sprintf(data, "%6d: ", total_bytes); + vte_terminal_feed(VTE_TERMINAL(display), data, strlen(data)); + } + } + sprintf(data_byte, "%02X ", (guchar)string[i]); log_chars(data_byte, 3); vte_terminal_feed(VTE_TERMINAL(display), data_byte, 3); - avance = (bytes_per_line - bytes) * 3 + bytes + 2; - + avance = (bytes_per_line - virt_col_pos) * 3 + virt_col_pos + 2; /* Move forward */ sprintf(data_byte, "%c[%dC", 27, avance); vte_terminal_feed(VTE_TERMINAL(display), data_byte, strlen(data_byte)); @@ -645,17 +664,18 @@ sprintf(data_byte, "%c[%dD", 27, avance + 1); vte_terminal_feed(VTE_TERMINAL(display), data_byte, strlen(data_byte)); - if(bytes == bytes_per_line / 2 - 1) + if(virt_col_pos == bytes_per_line / 2 - 1) vte_terminal_feed(VTE_TERMINAL(display), "- ", strlen("- ")); - bytes++; + virt_col_pos++; i++; /* End of line ? */ - if(bytes == bytes_per_line) + if(virt_col_pos == bytes_per_line) { vte_terminal_feed(VTE_TERMINAL(display), "\r\n", 2); - total_bytes += bytes; + total_bytes += virt_col_pos; + virt_col_pos = 0; } } @@ -700,17 +720,18 @@ void help_about_callback(GtkAction *action, gpointer data) { - gchar *authors[] = {"Julien Schimtt", "Zach Davis", NULL}; + gchar *authors[] = {"Julien Schimtt", "Zach Davis", "Florian Euchner", "Stephan Enderlein", + "Kevin Picot", NULL}; GError *error = NULL; GdkPixbuf *logo = NULL; - logo = gdk_pixbuf_new_from_resource ("/org/gtk/gtkterm/gtkterm_small.png", &error); + logo = gdk_pixbuf_new_from_resource ("/org/gtk/gtkterm/gtkterm_64x64.png", &error); gtk_show_about_dialog(GTK_WINDOW(Fenetre), "program-name", "GTKTerm", "logo", logo, "version", VERSION, - "comments", _("GTKTerm is a simple GTK+ terminal used to communicate with the serial port."), + "comments", _("Jun 2019\n\nGTKTerm is a simple GTK+ terminal used to communicate with the serial port."), "copyright", "Copyright © Julien Schimtt", "authors", authors, "website", "https://github.com/Jeija/gtkterm", @@ -765,24 +786,12 @@ void signals_close_port(GtkAction *action, gpointer data) { - Close_port(); - - gchar *message; - message = get_port_string(); - Set_status_message(message); - Set_window_title(message); - g_free(message); + interface_close_port(); } void signals_open_port(GtkAction *action, gpointer data) { - Config_port(); - - gchar *message; - message = get_port_string(); - Set_status_message(message); - Set_window_title(message); - g_free(message); + interface_open_port(); } gboolean control_signals_read(void) @@ -804,11 +813,33 @@ void Set_window_title(gchar *msg) { - gchar* header = g_strdup_printf("GtkTerm - %s", msg); + gchar* header = g_strdup_printf("GTKTerm - %s", msg); gtk_window_set_title(GTK_WINDOW(Fenetre), header); g_free(header); } +void interface_open_port(void) +{ + Config_port(); + + gchar *message; + message = get_port_string(); + Set_status_message(message); + Set_window_title(message); + g_free(message); +} + +void interface_close_port(void) +{ + Close_port(); + + gchar *message; + message = get_port_string(); + Set_status_message(message); + Set_window_title(message); + g_free(message); +} + void show_message(gchar *message, gint type_msg) { GtkWidget *Fenetre_msg; diff -Nru gtkterm-0.99.7+git9d63182/src/interface.h gtkterm-1.0.1/src/interface.h --- gtkterm-0.99.7+git9d63182/src/interface.h 2017-11-17 16:09:59.000000000 +0000 +++ gtkterm-1.0.1/src/interface.h 2019-12-18 16:31:37.000000000 +0000 @@ -32,6 +32,8 @@ gint send_serial(gchar *, gint); void Put_temp_message(const gchar *, gint); void Set_window_title(gchar *msg); +void interface_close_port(void); +void interface_open_port(void); void toggle_logging_pause_resume(gboolean currentlyLogging); void toggle_logging_sensitivity(gboolean currentlyLogging); diff -Nru gtkterm-0.99.7+git9d63182/src/Makefile.am gtkterm-1.0.1/src/Makefile.am --- gtkterm-0.99.7+git9d63182/src/Makefile.am 2017-11-17 16:09:58.000000000 +0000 +++ gtkterm-1.0.1/src/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,60 +0,0 @@ -# GtkTerm src/Makefile.am - -AM_CFLAGS = $(gtk_CFLAGS) $(vte_CFLAGS) - -bin_PROGRAMS = gtkterm - -# Rules to compile GResources -resources=$(shell $(GLIB_COMPILE_RESOURCES) --generate-dependencies gresource.xml) -gresource.c: gresource.xml $(resources) - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) --generate-source --target=$@ gresource.xml - -gresource.h: gresource.xml $(resources) - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) --generate-header --target=$@ gresource.xml - -gicon.c: gicon.xml $(resources) - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) --generate-source --target=$@ gicon.xml - -gicon.h: gicon.xml $(resources) - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) --generate-header --target=$@ gicon.xml - -gtkterm_SOURCES = \ - term_config.c \ - files.c \ - gtkterm.c \ - serial.c \ - config.h \ - files.h \ - serial.h \ - interface.c \ - interface.h \ - cmdline.c \ - cmdline.h \ - parsecfg.c \ - parsecfg.h \ - buffer.c \ - buffer.h \ - macros.c \ - macros.h \ - i18n.c \ - i18n.h \ - auto_config.h \ - logging.c \ - logging.h \ - gresource.c \ - gresource.h \ - gicon.c \ - gicon.h - -BUILT_SOURCES = \ - gresource.c \ - gresource.h \ - gicon.c \ - gicon.h - -gtkterm_LDADD = $(gtk_LIBS) $(vte_LIBS) - -CLEANFILES = $(BUILT_SOURCES) *~ - - -AM_CPPFLAGS = -DLOCALEDIR=\""$(localedir)"\" diff -Nru gtkterm-0.99.7+git9d63182/src/Makefile.in gtkterm-1.0.1/src/Makefile.in --- gtkterm-0.99.7+git9d63182/src/Makefile.in 2017-11-17 16:09:58.000000000 +0000 +++ gtkterm-1.0.1/src/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,662 +0,0 @@ -# Makefile.in generated by automake 1.15.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2017 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# GtkTerm src/Makefile.am - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -bin_PROGRAMS = gtkterm$(EXEEXT) -subdir = src -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" -PROGRAMS = $(bin_PROGRAMS) -am_gtkterm_OBJECTS = term_config.$(OBJEXT) files.$(OBJEXT) \ - gtkterm.$(OBJEXT) serial.$(OBJEXT) interface.$(OBJEXT) \ - cmdline.$(OBJEXT) parsecfg.$(OBJEXT) buffer.$(OBJEXT) \ - macros.$(OBJEXT) i18n.$(OBJEXT) logging.$(OBJEXT) \ - gresource.$(OBJEXT) gicon.$(OBJEXT) -gtkterm_OBJECTS = $(am_gtkterm_OBJECTS) -am__DEPENDENCIES_1 = -gtkterm_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(gtkterm_SOURCES) -DIST_SOURCES = $(gtkterm_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GMSGFMT = @GMSGFMT@ -GNUCFLAGS = @GNUCFLAGS@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@ -INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@ -INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@ -INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGMERGE = @MSGMERGE@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -XGETTEXT = @XGETTEXT@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build_alias = @build_alias@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gtk_CFLAGS = @gtk_CFLAGS@ -gtk_LIBS = @gtk_LIBS@ -host_alias = @host_alias@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -intltool__v_merge_options_ = @intltool__v_merge_options_@ -intltool__v_merge_options_0 = @intltool__v_merge_options_0@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -runstatedir = @runstatedir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -vte_CFLAGS = @vte_CFLAGS@ -vte_LIBS = @vte_LIBS@ -AM_CFLAGS = $(gtk_CFLAGS) $(vte_CFLAGS) - -# Rules to compile GResources -resources = $(shell $(GLIB_COMPILE_RESOURCES) --generate-dependencies gresource.xml) -gtkterm_SOURCES = \ - term_config.c \ - files.c \ - gtkterm.c \ - serial.c \ - config.h \ - files.h \ - serial.h \ - interface.c \ - interface.h \ - cmdline.c \ - cmdline.h \ - parsecfg.c \ - parsecfg.h \ - buffer.c \ - buffer.h \ - macros.c \ - macros.h \ - i18n.c \ - i18n.h \ - auto_config.h \ - logging.c \ - logging.h \ - gresource.c \ - gresource.h \ - gicon.c \ - gicon.h - -BUILT_SOURCES = \ - gresource.c \ - gresource.h \ - gicon.c \ - gicon.h - -gtkterm_LDADD = $(gtk_LIBS) $(vte_LIBS) -CLEANFILES = $(BUILT_SOURCES) *~ -AM_CPPFLAGS = -DLOCALEDIR=\""$(localedir)"\" -all: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) all-am - -.SUFFIXES: -.SUFFIXES: .c .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ - fi; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p \ - ; then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' \ - -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' \ - `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files - -clean-binPROGRAMS: - -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) - -gtkterm$(EXEEXT): $(gtkterm_OBJECTS) $(gtkterm_DEPENDENCIES) $(EXTRA_gtkterm_DEPENDENCIES) - @rm -f gtkterm$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(gtkterm_OBJECTS) $(gtkterm_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/buffer.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cmdline.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/files.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gicon.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gresource.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gtkterm.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i18n.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/interface.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/macros.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parsecfg.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/serial.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/term_config.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) check-am -all-am: Makefile $(PROGRAMS) -installdirs: - for dir in "$(DESTDIR)$(bindir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: install-binPROGRAMS - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS - -.MAKE: all check install install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \ - clean-binPROGRAMS clean-generic cscopelist-am ctags ctags-am \ - distclean distclean-compile distclean-generic distclean-tags \ - distdir dvi dvi-am html html-am info info-am install \ - install-am install-binPROGRAMS install-data install-data-am \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \ - ps ps-am tags tags-am uninstall uninstall-am \ - uninstall-binPROGRAMS - -.PRECIOUS: Makefile - -gresource.c: gresource.xml $(resources) - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) --generate-source --target=$@ gresource.xml - -gresource.h: gresource.xml $(resources) - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) --generate-header --target=$@ gresource.xml - -gicon.c: gicon.xml $(resources) - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) --generate-source --target=$@ gicon.xml - -gicon.h: gicon.xml $(resources) - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) --generate-header --target=$@ gicon.xml - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru gtkterm-0.99.7+git9d63182/src/meson.build gtkterm-1.0.1/src/meson.build --- gtkterm-0.99.7+git9d63182/src/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/src/meson.build 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,40 @@ +sources = [ + 'buffer.c', + 'buffer.h', + 'cmdline.c', + 'cmdline.h', + 'device_monitor.c', + 'device_monitor.h', + 'files.c', + 'files.h', + 'gtkterm.c', + 'i18n.c', + 'i18n.h', + 'interface.c', + 'interface.h', + 'logging.c', + 'logging.h', + 'macros.c', + 'macros.h', + 'parsecfg.c', + 'parsecfg.h', + 'serial.c', + 'serial.h', + 'term_config.c', + 'term_config.h', + 'user_signals.c', + 'user_signals.h', + gresources +] + +executable( + 'gtkterm', sources, + export_dynamic : true, + dependencies : [ + gtk_deps, + vte_deps, + config, + gudev_deps + ], + install : true +) diff -Nru gtkterm-0.99.7+git9d63182/src/parsecfg.c gtkterm-1.0.1/src/parsecfg.c --- gtkterm-0.99.7+git9d63182/src/parsecfg.c 2017-11-17 16:09:59.000000000 +0000 +++ gtkterm-1.0.1/src/parsecfg.c 2019-12-18 16:31:37.000000000 +0000 @@ -33,6 +33,7 @@ #include #include #include +#include #include "parsecfg.h" #include "i18n.h" @@ -575,6 +576,17 @@ char *strptr; cfgList *listptr; + //first step is to set locale to "C" and ignoring any environment + //defined locale. + //this is important because when saving float numbers in config file + //those are saved either as "1.0" or "1,0". When then starting + //gtkterm from console or via window manager menu, different locale + //could prevent processing config values correctly. + //In such a case configuration not loaded at all. + // + //Note: locale must be set at different locations to read and write + // correct values. + setlocale(LC_ALL,"C"); for (num = 0; cfg[num].type != CFG_END; num++) { @@ -1225,6 +1237,18 @@ char c[2]; cfgList *l; + //first step is to set locale to "C" and ignoring any environment + //defined locale. + //this is important because when saving float numbers in config file + //those are saved either as "1.0" or "1,0". When then starting + //gtkterm from console or via window manager menu, different locale + //could prevent processing config values correctly. + //In such a case configuration not loaded at all. + // + //Note: locale must be set at different locations to read and write + // correct values. + setlocale(LC_ALL,"C"); + for (j = 0; j < max; j++) { single_or_double_quote(cfgSectionNumberToName(j), c); diff -Nru gtkterm-0.99.7+git9d63182/src/serial.c gtkterm-1.0.1/src/serial.c --- gtkterm-0.99.7+git9d63182/src/serial.c 2017-11-17 16:09:59.000000000 +0000 +++ gtkterm-1.0.1/src/serial.c 2019-12-18 16:31:37.000000000 +0000 @@ -159,14 +159,17 @@ return FALSE; } - if(flock(serial_port_fd, LOCK_EX | LOCK_NB) == -1) + if(! config.disable_port_lock) { + if(flock(serial_port_fd, LOCK_EX | LOCK_NB) == -1) + { Close_port(); msg = g_strdup_printf(_("Cannot lock port! The serial port may currently be in use by another program.\n")); show_message(msg, MSG_ERR); g_free(msg); return FALSE; + } } tcgetattr(serial_port_fd, &termios_p); @@ -328,7 +331,10 @@ tcsetattr(serial_port_fd, TCSANOW, &termios_save); tcflush(serial_port_fd, TCOFLUSH); tcflush(serial_port_fd, TCIFLUSH); - flock(serial_port_fd, LOCK_UN); + if(! config.disable_port_lock) + { + flock(serial_port_fd, LOCK_UN); + } close(serial_port_fd); serial_port_fd = -1; } diff -Nru gtkterm-0.99.7+git9d63182/src/term_config.c gtkterm-1.0.1/src/term_config.c --- gtkterm-0.99.7+git9d63182/src/term_config.c 2017-11-17 16:09:59.000000000 +0000 +++ gtkterm-1.0.1/src/term_config.c 2019-12-18 16:31:37.000000000 +0000 @@ -45,7 +45,6 @@ #include "serial.h" #include "term_config.h" #include "interface.h" -#include "gresource.h" #include "parsecfg.h" #include "macros.h" #include "i18n.h" @@ -60,6 +59,7 @@ "/dev/tts/%d", "/dev/ttyUSB%d", "/dev/ttyACM%d", + "/dev/ttyXRUSB%d", "/dev/usb/tts/%d", NULL }; @@ -77,6 +77,7 @@ gint *rts_time_after_tx; gint *echo; gint *crlfauto; +gint *timestamp; cfgList **macro_list = NULL; gchar **font; @@ -109,6 +110,7 @@ {"rs485_rts_time_after_tx", CFG_INT, &rts_time_after_tx}, {"echo", CFG_BOOL, &echo}, {"crlfauto", CFG_BOOL, &crlfauto}, + {"timestamp", CFG_BOOL, ×tamp}, {"font", CFG_STRING, &font}, {"macros", CFG_STRING_LIST, ¯o_list}, {"term_block_cursor", CFG_BOOL, &block_cursor}, @@ -154,6 +156,12 @@ extern GtkWidget *display; +void ConfigFlags(void) +{ + Set_crlfauto(config.crlfauto); + Set_timestamp(config.timestamp); +} + void Config_Port_Fenetre(GtkAction *action, gpointer data) { GtkWidget *Table, *Label, *Bouton_OK, *Bouton_annule, @@ -538,6 +546,7 @@ config.car = -1; Config_port(); + ConfigFlags(); message = get_port_string(); Set_status_message(message); @@ -614,7 +623,7 @@ if(max == -1) { - show_message(_("Cannot read configuration file!\n"), MSG_ERR); + show_message(_("Cannot read configuration file!\nConfig file may contain invalid parameter.\n"), MSG_ERR); return; } @@ -732,7 +741,10 @@ max = cfgParse(config_file, cfg, CFG_INI); if(max == -1) + { + show_message(_("Cannot save configuration file!\nConfig file may contain invalid parameter.\n"), MSG_ERR); return; + } for(i = 0; i < max; i++) { @@ -783,7 +795,10 @@ max = cfgParse(config_file, cfg, CFG_INI); if(max == -1) + { + show_message(_("Cannot write configuration file!\nConfig file may contain invalid parameter.\n"), MSG_ERR); return; + } config_name = gtk_entry_get_text(GTK_ENTRY(edit)); @@ -833,6 +848,7 @@ Load_configuration_from_file(txt); Verify_configuration(); Config_port(); + ConfigFlags(); add_shortcuts(); message = get_port_string(); @@ -871,7 +887,10 @@ max = cfgParse(config_file, cfg, CFG_INI); if(max == -1) + { + show_message(_("Cannot read configuration file!\nConfig file may contain invalid parameter.\n"), MSG_ERR); return -1; + } else { @@ -930,6 +949,11 @@ else config.crlfauto = FALSE; + if(timestamp[i] != -1) + config.timestamp = (gboolean)timestamp[i]; + else + config.timestamp = FALSE; + g_free(term_conf.font); term_conf.font = g_strdup(font[i]); @@ -1151,6 +1175,8 @@ config.car = DEFAULT_CHAR; config.echo = DEFAULT_ECHO; config.crlfauto = FALSE; + config.timestamp = FALSE; + config.disable_port_lock = FALSE; term_conf.font = g_strdup_printf(DEFAULT_FONT); @@ -1255,6 +1281,14 @@ cfgStoreValue(cfg, "crlfauto", string, CFG_INI, pos); g_free(string); + if(config.timestamp == FALSE) + string = g_strdup_printf("False"); + else + string = g_strdup_printf("True"); + + cfgStoreValue(cfg, "timestamp", string, CFG_INI, pos); + g_free(string); + string = g_strdup(term_conf.font); cfgStoreValue(cfg, "font", string, CFG_INI, pos); g_free(string); @@ -1412,6 +1446,7 @@ GtkWidget *dialog; dialog = GTK_WIDGET(gtk_builder_get_object(builder, "dialog")); gtk_window_set_transient_for(dialog, Fenetre); + gtk_window_set_title(GTK_WINDOW(dialog), _("Main Window")); /** Connect signals **/ // Font Selection Button @@ -1556,4 +1591,3 @@ (gpointer)check_text_input, user_data); g_signal_stop_emission_by_name(editable, "insert-text"); } - diff -Nru gtkterm-0.99.7+git9d63182/src/term_config.h gtkterm-1.0.1/src/term_config.h --- gtkterm-0.99.7+git9d63182/src/term_config.h 2017-11-17 16:09:59.000000000 +0000 +++ gtkterm-1.0.1/src/term_config.h 2019-12-18 16:31:37.000000000 +0000 @@ -15,6 +15,7 @@ #ifndef TERM_CONFIG_H_ #define TERM_CONFIG_H_ +void ConfigFlags(void); void Config_Port_Fenetre(GtkAction *action, gpointer data); gint Lis_Config(GtkWidget *bouton, GtkWidget **Combos); void Config_Terminal(GtkAction *action, gpointer data); @@ -41,9 +42,11 @@ gint delai; // end of char delay: in ms gint rs485_rts_time_before_transmit; gint rs485_rts_time_after_transmit; - gchar car; // caractere attendre + gchar car; // caractere attendre gboolean echo; // echo local - gboolean crlfauto; // line feed auto + gboolean crlfauto; // line feed auto + gboolean timestamp; + gboolean disable_port_lock; }; typedef struct @@ -60,10 +63,10 @@ #define DEFAULT_FONT "Monospace 12" -#define DEFAULT_SCROLLBACK 200 +#define DEFAULT_SCROLLBACK 10000 #define DEFAULT_PORT "/dev/ttyS0" -#define DEFAULT_SPEED 9600 +#define DEFAULT_SPEED 115200 #define DEFAULT_PARITY 0 #define DEFAULT_BITS 8 #define DEFAULT_STOP 1 diff -Nru gtkterm-0.99.7+git9d63182/src/user_signals.c gtkterm-1.0.1/src/user_signals.c --- gtkterm-0.99.7+git9d63182/src/user_signals.c 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/src/user_signals.c 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,20 @@ +#include +#include "interface.h" + +static gboolean handle_usr1(gpointer user_data) +{ + interface_open_port(); + return G_SOURCE_CONTINUE; +} + +static gboolean handle_usr2(gpointer user_data) +{ + interface_close_port(); + return G_SOURCE_CONTINUE; +} + +void user_signals_catch(void) +{ + g_unix_signal_add(SIGUSR1, (GSourceFunc) handle_usr1, NULL); + g_unix_signal_add(SIGUSR2, (GSourceFunc) handle_usr2, NULL); +} diff -Nru gtkterm-0.99.7+git9d63182/src/user_signals.h gtkterm-1.0.1/src/user_signals.h --- gtkterm-0.99.7+git9d63182/src/user_signals.h 1970-01-01 00:00:00.000000000 +0000 +++ gtkterm-1.0.1/src/user_signals.h 2019-12-18 16:31:37.000000000 +0000 @@ -0,0 +1,19 @@ +/***********************************************************************/ +/* device_mintor.h */ +/* --------- */ +/* GTKTerm Software */ +/* (c) Julien Schmitt */ +/* */ +/* ------------------------------------------------------------------- */ +/* */ +/* Purpose */ +/* React to SIGUSR signals (for scriptability) */ +/* */ +/***********************************************************************/ + +#ifndef _USER_SIGNALS +#define _USER_SIGNALS + +void user_signals_catch(void); + +#endif diff -Nru gtkterm-0.99.7+git9d63182/TODO gtkterm-1.0.1/TODO --- gtkterm-0.99.7+git9d63182/TODO 2017-11-17 16:09:57.000000000 +0000 +++ gtkterm-1.0.1/TODO 1970-01-01 00:00:00.000000000 +0000 @@ -1,11 +0,0 @@ - -* Changes for 1.00 release (2012?) - - Update translations - - Update documentation and version information - - Migrate completely to Gtk-3.0 - - Refactor the code from french to english - -* Possible features - - Add inter-char delay for slow devices - - Support for tabs - - Better profile support