diff -Nru hitori-3.22.4/ABOUT-NLS hitori-3.31.0/ABOUT-NLS --- hitori-3.22.4/ABOUT-NLS 2017-10-02 08:07:40.000000000 +0000 +++ hitori-3.31.0/ABOUT-NLS 1970-01-01 00:00:00.000000000 +0000 @@ -1,1379 +0,0 @@ -1 Notes on the Free Translation Project -*************************************** - -Free software is going international! The Free Translation Project is a -way to get maintainers of free software, translators, and users all -together, so that free software will gradually become able to speak many -languages. A few packages already provide translations for their -messages. - - If you found this 'ABOUT-NLS' file inside a distribution, you may -assume that the distributed package does use GNU 'gettext' internally, -itself available at your nearest GNU archive site. But you do _not_ -need to install GNU 'gettext' prior to configuring, installing or using -this package with messages translated. - - Installers will find here some useful hints. These notes also -explain how users should proceed for getting the programs to use the -available translations. They tell how people wanting to contribute and -work on translations can contact the appropriate team. - -1.1 INSTALL Matters -=================== - -Some packages are "localizable" when properly installed; the programs -they contain can be made to speak your own native language. Most such -packages use GNU 'gettext'. Other packages have their own ways to -internationalization, predating GNU 'gettext'. - - By default, this package will be installed to allow translation of -messages. It will automatically detect whether the system already -provides the GNU 'gettext' functions. Installers may use special -options at configuration time for changing the default behaviour. The -command: - - ./configure --disable-nls - -will _totally_ disable translation of messages. - - When you already have GNU 'gettext' installed on your system and run -configure without an option for your new package, 'configure' will -probably detect the previously built and installed 'libintl' library and -will decide to use it. If not, you may have to to use the -'--with-libintl-prefix' option to tell 'configure' where to look for it. - - Internationalized packages usually have many 'po/LL.po' files, where -LL gives an ISO 639 two-letter code identifying the language. Unless -translations have been forbidden at 'configure' time by using the -'--disable-nls' switch, all available translations are installed -together with the package. However, the environment variable 'LINGUAS' -may be set, prior to configuration, to limit the installed set. -'LINGUAS' should then contain a space separated list of two-letter -codes, stating which languages are allowed. - -1.2 Using This Package -====================== - -As a user, if your language has been installed for this package, you -only have to set the 'LANG' environment variable to the appropriate -'LL_CC' combination. If you happen to have the 'LC_ALL' or some other -'LC_xxx' environment variables set, you should unset them before setting -'LANG', otherwise the setting of 'LANG' will not have the desired -effect. Here 'LL' is an ISO 639 two-letter language code, and 'CC' is -an ISO 3166 two-letter country code. For example, let's suppose that -you speak German and live in Germany. At the shell prompt, merely -execute 'setenv LANG de_DE' (in 'csh'), 'export LANG; LANG=de_DE' (in -'sh') or 'export LANG=de_DE' (in 'bash'). This can be done from your -'.login' or '.profile' file, once and for all. - - You might think that the country code specification is redundant. -But in fact, some languages have dialects in different countries. For -example, 'de_AT' is used for Austria, and 'pt_BR' for Brazil. The -country code serves to distinguish the dialects. - - The locale naming convention of 'LL_CC', with 'LL' denoting the -language and 'CC' denoting the country, is the one use on systems based -on GNU libc. On other systems, some variations of this scheme are used, -such as 'LL' or 'LL_CC.ENCODING'. You can get the list of locales -supported by your system for your language by running the command -'locale -a | grep '^LL''. - - Not all programs have translations for all languages. By default, an -English message is shown in place of a nonexistent translation. If you -understand other languages, you can set up a priority list of languages. -This is done through a different environment variable, called -'LANGUAGE'. GNU 'gettext' gives preference to 'LANGUAGE' over 'LANG' -for the purpose of message handling, but you still need to have 'LANG' -set to the primary language; this is required by other parts of the -system libraries. For example, some Swedish users who would rather read -translations in German than English for when Swedish is not available, -set 'LANGUAGE' to 'sv:de' while leaving 'LANG' to 'sv_SE'. - - Special advice for Norwegian users: The language code for Norwegian -bokma*l changed from 'no' to 'nb' recently (in 2003). During the -transition period, while some message catalogs for this language are -installed under 'nb' and some older ones under 'no', it's recommended -for Norwegian users to set 'LANGUAGE' to 'nb:no' so that both newer and -older translations are used. - - In the 'LANGUAGE' environment variable, but not in the 'LANG' -environment variable, 'LL_CC' combinations can be abbreviated as 'LL' to -denote the language's main dialect. For example, 'de' is equivalent to -'de_DE' (German as spoken in Germany), and 'pt' to 'pt_PT' (Portuguese -as spoken in Portugal) in this context. - -1.3 Translating Teams -===================== - -For the Free Translation Project to be a success, we need interested -people who like their own language and write it well, and who are also -able to synergize with other translators speaking the same language. -Each translation team has its own mailing list. The up-to-date list of -teams can be found at the Free Translation Project's homepage, -'http://translationproject.org/', in the "Teams" area. - - If you'd like to volunteer to _work_ at translating messages, you -should become a member of the translating team for your own language. -The subscribing address is _not_ the same as the list itself, it has -'-request' appended. For example, speakers of Swedish can send a -message to 'sv-request@li.org', having this message body: - - subscribe - - Keep in mind that team members are expected to participate _actively_ -in translations, or at solving translational difficulties, rather than -merely lurking around. If your team does not exist yet and you want to -start one, or if you are unsure about what to do or how to get started, -please write to 'coordinator@translationproject.org' to reach the -coordinator for all translator teams. - - The English team is special. It works at improving and uniformizing -the terminology in use. Proven linguistic skills are praised more than -programming skills, here. - -1.4 Available Packages -====================== - -Languages are not equally supported in all packages. The following -matrix shows the current state of internationalization, as of Jun 2014. -The matrix shows, in regard of each package, for which languages PO -files have been submitted to translation coordination, with a -translation percentage of at least 50%. - - Ready PO files af am an ar as ast az be bg bn bn_IN bs ca crh cs - +---------------------------------------------------+ - a2ps | [] [] [] | - aegis | | - anubis | | - aspell | [] [] [] | - bash | [] [] [] | - bfd | | - binutils | [] | - bison | | - bison-runtime | [] | - buzztrax | [] | - ccd2cue | | - ccide | | - cflow | | - clisp | | - coreutils | [] [] | - cpio | | - cppi | | - cpplib | [] | - cryptsetup | [] | - datamash | | - denemo | [] [] | - dfarc | [] | - dialog | [] [] [] | - dico | | - diffutils | [] | - dink | [] | - direvent | | - doodle | [] | - dos2unix | | - dos2unix-man | | - e2fsprogs | [] [] | - enscript | [] | - exif | [] | - fetchmail | [] [] | - findutils | [] | - flex | [] | - freedink | [] [] | - fusionforge | | - gas | | - gawk | [] | - gcal | [] | - gcc | | - gdbm | | - gettext-examples | [] [] [] [] [] | - gettext-runtime | [] [] [] | - gettext-tools | [] [] | - gjay | | - glunarclock | [] [] [] | - gnubiff | [] | - gnubik | [] | - gnucash | () () [] | - gnuchess | | - gnulib | [] | - gnunet | | - gnunet-gtk | | - gold | | - gphoto2 | [] | - gprof | [] | - gramadoir | | - grep | [] [] [] | - grub | [] | - gsasl | | - gss | | - gst-plugins-bad | [] [] | - gst-plugins-base | [] [] [] | - gst-plugins-good | [] [] [] | - gst-plugins-ugly | [] [] [] | - gstreamer | [] [] [] [] | - gtick | [] | - gtkam | [] [] | - gtkspell | [] [] [] [] [] | - guix | | - guix-packages | | - gutenprint | [] | - hello | [] | - help2man | | - help2man-texi | | - hylafax | | - idutils | | - iso_15924 | [] | - iso_3166 | [] [] [] [] [] [] [] [] [] [] | - iso_3166_2 | | - iso_4217 | [] | - iso_639 | [] [] [] [] [] [] [] [] [] | - iso_639_3 | [] [] | - iso_639_5 | | - jwhois | | - kbd | [] | - klavaro | [] [] [] [] [] | - ld | [] | - leafpad | [] [] [] [] | - libc | [] [] [] | - libexif | () | - libextractor | | - libgnutls | [] | - libgphoto2 | [] | - libgphoto2_port | [] | - libgsasl | | - libiconv | [] [] | - libidn | [] | - liferea | [] [] [] [] | - lilypond | [] [] | - lordsawar | [] | - lprng | | - lynx | [] [] | - m4 | [] | - mailfromd | | - mailutils | | - make | [] | - man-db | [] [] | - man-db-manpages | | - midi-instruments | [] [] [] | - minicom | [] | - mkisofs | [] | - myserver | [] | - nano | [] [] [] | - opcodes | | - parted | [] | - pies | | - pnmixer | | - popt | [] | - procps-ng | | - procps-ng-man | | - psmisc | [] | - pspp | [] | - pushover | [] | - pwdutils | | - pyspread | | - radius | [] | - recode | [] [] [] | - recutils | | - rpm | | - rush | | - sarg | | - sed | [] [] [] [] | - sharutils | [] | - shishi | | - skribilo | | - solfege | [] [] | - solfege-manual | | - spotmachine | | - sudo | [] [] | - sudoers | [] [] | - sysstat | [] | - tar | [] [] [] | - texinfo | [] [] | - texinfo_document | [] [] | - tigervnc | [] | - tin | | - tin-man | | - tracgoogleappsa... | | - trader | | - util-linux | [] | - ve | | - vice | | - vmm | | - vorbis-tools | [] | - wastesedge | | - wcd | | - wcd-man | | - wdiff | [] [] | - wget | [] | - wyslij-po | | - xboard | | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] | - +---------------------------------------------------+ - af am an ar as ast az be bg bn bn_IN bs ca crh cs - 4 0 2 5 3 11 0 8 25 3 3 1 55 4 74 - - da de el en en_GB en_ZA eo es et eu fa fi fr - +--------------------------------------------------+ - a2ps | [] [] [] [] [] [] [] [] [] | - aegis | [] [] [] [] | - anubis | [] [] [] [] [] | - aspell | [] [] [] [] [] [] [] | - bash | [] [] [] | - bfd | [] [] [] [] | - binutils | [] [] [] | - bison | [] [] [] [] [] [] [] [] | - bison-runtime | [] [] [] [] [] [] [] [] | - buzztrax | [] [] [] [] | - ccd2cue | [] [] [] [] | - ccide | [] [] [] [] [] [] | - cflow | [] [] [] [] [] | - clisp | [] [] [] [] [] | - coreutils | [] [] [] [] [] | - cpio | [] [] [] [] [] | - cppi | [] [] [] [] [] | - cpplib | [] [] [] [] [] [] | - cryptsetup | [] [] [] [] [] | - datamash | [] [] [] [] | - denemo | [] | - dfarc | [] [] [] [] [] [] | - dialog | [] [] [] [] [] [] [] [] [] | - dico | [] [] [] [] | - diffutils | [] [] [] [] [] [] | - dink | [] [] [] [] [] [] | - direvent | [] [] [] [] | - doodle | [] [] [] [] | - dos2unix | [] [] [] [] [] | - dos2unix-man | [] [] [] | - e2fsprogs | [] [] [] [] [] | - enscript | [] [] [] [] [] [] | - exif | [] [] [] [] [] [] | - fetchmail | [] () [] [] [] [] [] | - findutils | [] [] [] [] [] [] [] [] | - flex | [] [] [] [] [] [] | - freedink | [] [] [] [] [] [] [] [] | - fusionforge | [] [] [] | - gas | [] [] [] | - gawk | [] [] [] [] [] | - gcal | [] [] [] [] | - gcc | [] | - gdbm | [] [] [] [] [] | - gettext-examples | [] [] [] [] [] [] [] | - gettext-runtime | [] [] [] [] [] [] | - gettext-tools | [] [] [] [] [] | - gjay | [] [] [] [] | - glunarclock | [] [] [] [] [] | - gnubiff | () [] [] () | - gnubik | [] [] [] [] [] | - gnucash | [] () () () () () () | - gnuchess | [] [] [] [] | - gnulib | [] [] [] [] [] [] [] | - gnunet | [] | - gnunet-gtk | [] | - gold | [] [] [] | - gphoto2 | [] () [] [] | - gprof | [] [] [] [] [] [] | - gramadoir | [] [] [] [] [] | - grep | [] [] [] [] [] [] [] | - grub | [] [] [] [] [] | - gsasl | [] [] [] [] [] | - gss | [] [] [] [] [] | - gst-plugins-bad | [] [] [] | - gst-plugins-base | [] [] [] [] [] [] | - gst-plugins-good | [] [] [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] [] [] [] | - gstreamer | [] [] [] [] [] [] [] | - gtick | [] () [] [] [] | - gtkam | [] () [] [] [] [] | - gtkspell | [] [] [] [] [] [] [] [] | - guix | [] [] | - guix-packages | | - gutenprint | [] [] [] [] | - hello | [] [] [] [] [] [] [] [] | - help2man | [] [] [] [] [] [] [] | - help2man-texi | [] [] [] | - hylafax | [] [] | - idutils | [] [] [] [] [] | - iso_15924 | [] () [] [] () [] () | - iso_3166 | [] () [] [] [] [] () [] () | - iso_3166_2 | [] () () () | - iso_4217 | [] () [] [] [] () [] () | - iso_639 | [] () [] [] () [] () | - iso_639_3 | () () () | - iso_639_5 | () () () | - jwhois | [] [] [] [] [] | - kbd | [] [] [] [] [] [] | - klavaro | [] [] [] [] [] [] [] | - ld | [] [] [] [] | - leafpad | [] [] [] [] [] [] [] [] | - libc | [] [] [] [] [] | - libexif | [] [] () [] [] | - libextractor | [] | - libgnutls | [] [] [] [] | - libgphoto2 | [] () [] | - libgphoto2_port | [] () [] [] [] [] | - libgsasl | [] [] [] [] [] | - libiconv | [] [] [] [] [] [] [] | - libidn | [] [] [] [] [] | - liferea | [] () [] [] [] [] [] | - lilypond | [] [] [] [] [] [] | - lordsawar | [] [] | - lprng | | - lynx | [] [] [] [] [] [] | - m4 | [] [] [] [] [] [] | - mailfromd | [] | - mailutils | [] [] [] [] | - make | [] [] [] [] [] | - man-db | [] [] [] [] | - man-db-manpages | [] [] | - midi-instruments | [] [] [] [] [] [] [] [] [] | - minicom | [] [] [] [] [] | - mkisofs | [] [] [] | - myserver | [] [] [] [] | - nano | [] [] [] [] [] [] [] | - opcodes | [] [] [] [] [] | - parted | [] [] [] | - pies | [] | - pnmixer | [] [] | - popt | [] [] [] [] [] [] | - procps-ng | [] [] | - procps-ng-man | [] [] | - psmisc | [] [] [] [] [] [] [] | - pspp | [] [] [] | - pushover | () [] [] [] | - pwdutils | [] [] [] | - pyspread | [] [] [] | - radius | [] [] | - recode | [] [] [] [] [] [] [] | - recutils | [] [] [] [] | - rpm | [] [] [] [] [] | - rush | [] [] [] | - sarg | [] [] | - sed | [] [] [] [] [] [] [] [] | - sharutils | [] [] [] [] | - shishi | [] [] [] | - skribilo | [] [] [] | - solfege | [] [] [] [] [] [] [] [] | - solfege-manual | [] [] [] [] [] | - spotmachine | [] [] [] [] [] | - sudo | [] [] [] [] [] [] | - sudoers | [] [] [] [] [] [] | - sysstat | [] [] [] [] [] [] | - tar | [] [] [] [] [] [] [] | - texinfo | [] [] [] [] [] | - texinfo_document | [] [] [] [] | - tigervnc | [] [] [] [] [] [] | - tin | [] [] [] [] | - tin-man | [] | - tracgoogleappsa... | [] [] [] [] [] | - trader | [] [] [] [] [] [] | - util-linux | [] [] [] [] | - ve | [] [] [] [] [] | - vice | () () () | - vmm | [] [] | - vorbis-tools | [] [] [] [] | - wastesedge | [] | - wcd | [] [] [] [] | - wcd-man | [] | - wdiff | [] [] [] [] [] [] [] | - wget | [] [] [] [] [] [] | - wyslij-po | [] [] [] [] | - xboard | [] [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] [] [] [] [] | - +--------------------------------------------------+ - da de el en en_GB en_ZA eo es et eu fa fi fr - 119 131 32 1 6 0 94 95 22 13 4 102 139 - - ga gd gl gu he hi hr hu hy ia id is it ja ka kk - +-------------------------------------------------+ - a2ps | [] [] [] [] | - aegis | [] | - anubis | [] [] [] [] | - aspell | [] [] [] [] [] | - bash | [] [] [] [] | - bfd | [] [] | - binutils | [] [] [] | - bison | [] | - bison-runtime | [] [] [] [] [] [] [] [] | - buzztrax | | - ccd2cue | [] | - ccide | [] [] | - cflow | [] [] [] | - clisp | | - coreutils | [] [] | - cpio | [] [] [] [] [] [] | - cppi | [] [] [] [] [] | - cpplib | [] [] | - cryptsetup | [] | - datamash | | - denemo | [] | - dfarc | [] [] [] | - dialog | [] [] [] [] [] [] [] [] [] [] | - dico | | - diffutils | [] [] [] [] | - dink | [] | - direvent | [] | - doodle | [] [] | - dos2unix | [] [] | - dos2unix-man | | - e2fsprogs | [] [] | - enscript | [] [] [] | - exif | [] [] [] [] [] [] | - fetchmail | [] [] [] | - findutils | [] [] [] [] [] [] [] | - flex | [] | - freedink | [] [] [] [] | - fusionforge | | - gas | [] | - gawk | [] () [] | - gcal | | - gcc | | - gdbm | | - gettext-examples | [] [] [] [] [] [] [] | - gettext-runtime | [] [] [] [] [] [] [] | - gettext-tools | [] [] [] | - gjay | [] | - glunarclock | [] [] [] [] [] [] | - gnubiff | [] [] () | - gnubik | [] [] [] | - gnucash | () () () () () | - gnuchess | | - gnulib | [] [] [] [] [] | - gnunet | | - gnunet-gtk | | - gold | [] [] | - gphoto2 | [] [] [] [] | - gprof | [] [] [] [] | - gramadoir | [] [] [] | - grep | [] [] [] [] [] [] [] | - grub | [] [] [] | - gsasl | [] [] [] [] [] | - gss | [] [] [] [] [] | - gst-plugins-bad | [] [] [] | - gst-plugins-base | [] [] [] [] | - gst-plugins-good | [] [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] [] | - gstreamer | [] [] [] [] [] | - gtick | [] [] [] [] [] | - gtkam | [] [] [] [] [] | - gtkspell | [] [] [] [] [] [] [] [] [] [] | - guix | | - guix-packages | | - gutenprint | [] [] [] | - hello | [] [] [] [] [] | - help2man | [] [] [] | - help2man-texi | | - hylafax | [] | - idutils | [] [] | - iso_15924 | [] [] [] [] [] [] | - iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] | - iso_3166_2 | [] [] | - iso_4217 | [] [] [] [] [] [] | - iso_639 | [] [] [] [] [] [] [] [] [] | - iso_639_3 | [] [] | - iso_639_5 | | - jwhois | [] [] [] [] | - kbd | [] [] [] | - klavaro | [] [] [] [] [] | - ld | [] [] [] [] | - leafpad | [] [] [] [] [] [] [] () | - libc | [] [] [] [] [] | - libexif | [] | - libextractor | | - libgnutls | [] | - libgphoto2 | [] [] | - libgphoto2_port | [] [] | - libgsasl | [] [] [] [] | - libiconv | [] [] [] [] [] [] [] | - libidn | [] [] [] [] | - liferea | [] [] [] [] [] | - lilypond | [] | - lordsawar | | - lprng | [] | - lynx | [] [] [] [] | - m4 | [] [] [] [] [] | - mailfromd | | - mailutils | | - make | [] [] [] [] | - man-db | [] [] | - man-db-manpages | [] [] | - midi-instruments | [] [] [] [] [] [] [] [] [] | - minicom | [] [] [] | - mkisofs | [] [] | - myserver | [] | - nano | [] [] [] [] [] [] | - opcodes | [] [] [] | - parted | [] [] [] [] [] | - pies | | - pnmixer | [] [] | - popt | [] [] [] [] [] [] [] [] [] [] | - procps-ng | | - procps-ng-man | | - psmisc | [] [] [] [] | - pspp | [] [] | - pushover | [] | - pwdutils | [] | - pyspread | | - radius | [] | - recode | [] [] [] [] [] [] [] | - recutils | | - rpm | [] | - rush | [] | - sarg | | - sed | [] [] [] [] [] [] [] | - sharutils | | - shishi | | - skribilo | [] | - solfege | [] [] | - solfege-manual | | - spotmachine | | - sudo | [] [] [] [] | - sudoers | [] [] [] | - sysstat | [] [] [] [] | - tar | [] [] [] [] [] [] | - texinfo | [] [] [] | - texinfo_document | [] [] [] | - tigervnc | | - tin | | - tin-man | | - tracgoogleappsa... | [] [] [] [] | - trader | [] [] | - util-linux | [] | - ve | [] | - vice | () () | - vmm | | - vorbis-tools | [] [] | - wastesedge | [] | - wcd | | - wcd-man | | - wdiff | [] [] [] | - wget | [] [] [] [] | - wyslij-po | [] [] [] | - xboard | | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] [] [] [] | - +-------------------------------------------------+ - ga gd gl gu he hi hr hu hy ia id is it ja ka kk - 35 2 47 4 8 2 60 71 2 6 81 11 87 57 0 3 - - kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl - +--------------------------------------------------+ - a2ps | [] [] | - aegis | [] | - anubis | [] [] [] | - aspell | [] [] | - bash | [] [] | - bfd | | - binutils | | - bison | [] | - bison-runtime | [] [] [] [] [] [] | - buzztrax | | - ccd2cue | | - ccide | [] [] | - cflow | [] | - clisp | [] | - coreutils | [] [] | - cpio | [] | - cppi | | - cpplib | [] | - cryptsetup | [] | - datamash | [] [] | - denemo | | - dfarc | [] [] | - dialog | [] [] [] [] [] [] | - dico | | - diffutils | [] [] [] | - dink | [] | - direvent | [] | - doodle | [] | - dos2unix | [] [] | - dos2unix-man | [] | - e2fsprogs | [] | - enscript | [] | - exif | [] [] [] | - fetchmail | [] | - findutils | [] [] | - flex | [] | - freedink | [] [] | - fusionforge | | - gas | | - gawk | [] | - gcal | | - gcc | | - gdbm | | - gettext-examples | [] [] [] [] [] [] | - gettext-runtime | [] [] [] | - gettext-tools | [] | - gjay | | - glunarclock | [] [] | - gnubiff | [] | - gnubik | [] [] | - gnucash | () () () () () () () [] | - gnuchess | [] [] | - gnulib | [] | - gnunet | | - gnunet-gtk | | - gold | | - gphoto2 | [] | - gprof | [] [] | - gramadoir | [] | - grep | [] [] | - grub | [] [] [] | - gsasl | [] | - gss | | - gst-plugins-bad | [] [] [] | - gst-plugins-base | [] [] [] | - gst-plugins-good | [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] | - gstreamer | [] [] [] | - gtick | [] | - gtkam | [] [] | - gtkspell | [] [] [] [] [] [] [] | - guix | | - guix-packages | | - gutenprint | [] | - hello | [] [] [] | - help2man | [] | - help2man-texi | | - hylafax | [] | - idutils | [] | - iso_15924 | () [] [] | - iso_3166 | [] [] [] () [] [] [] [] [] [] | - iso_3166_2 | () [] | - iso_4217 | () [] [] [] | - iso_639 | [] [] () [] [] [] [] | - iso_639_3 | [] () [] | - iso_639_5 | () | - jwhois | [] [] | - kbd | [] | - klavaro | [] [] | - ld | | - leafpad | [] [] [] [] [] | - libc | [] [] | - libexif | [] | - libextractor | [] | - libgnutls | [] [] | - libgphoto2 | [] | - libgphoto2_port | [] | - libgsasl | [] | - libiconv | [] [] | - libidn | [] | - liferea | [] [] [] | - lilypond | [] | - lordsawar | | - lprng | | - lynx | [] | - m4 | [] | - mailfromd | | - mailutils | | - make | [] [] | - man-db | [] | - man-db-manpages | [] | - midi-instruments | [] [] [] [] [] [] [] | - minicom | [] | - mkisofs | [] | - myserver | | - nano | [] [] [] | - opcodes | [] | - parted | [] [] | - pies | | - pnmixer | [] | - popt | [] [] [] [] [] | - procps-ng | | - procps-ng-man | | - psmisc | [] | - pspp | [] [] | - pushover | | - pwdutils | [] | - pyspread | | - radius | [] | - recode | [] [] | - recutils | [] | - rpm | [] | - rush | [] | - sarg | | - sed | [] [] | - sharutils | [] | - shishi | | - skribilo | | - solfege | [] [] | - solfege-manual | [] | - spotmachine | [] | - sudo | [] [] [] | - sudoers | [] [] [] | - sysstat | [] [] | - tar | [] [] [] | - texinfo | [] | - texinfo_document | [] | - tigervnc | [] | - tin | | - tin-man | | - tracgoogleappsa... | [] [] [] | - trader | [] | - util-linux | [] | - ve | [] | - vice | [] | - vmm | [] | - vorbis-tools | [] | - wastesedge | [] | - wcd | [] | - wcd-man | [] | - wdiff | [] | - wget | [] [] | - wyslij-po | [] | - xboard | [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] | - +--------------------------------------------------+ - kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl - 5 15 4 6 0 13 23 3 3 3 4 11 2 42 1 125 - - nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr - +------------------------------------------------+ - a2ps | [] [] [] [] [] [] [] | - aegis | [] [] | - anubis | [] [] [] | - aspell | [] [] [] [] [] [] [] | - bash | [] [] [] [] [] [] | - bfd | [] [] | - binutils | [] [] | - bison | [] [] [] | - bison-runtime | [] [] [] [] [] [] [] [] | - buzztrax | [] | - ccd2cue | [] [] | - ccide | [] [] [] | - cflow | [] [] [] | - clisp | [] | - coreutils | [] [] [] [] | - cpio | [] [] [] | - cppi | [] [] [] | - cpplib | [] [] [] | - cryptsetup | [] [] [] | - datamash | [] [] | - denemo | | - dfarc | [] [] [] | - dialog | [] [] [] [] [] [] [] | - dico | [] | - diffutils | [] [] [] | - dink | | - direvent | [] [] [] | - doodle | [] [] | - dos2unix | [] [] [] [] | - dos2unix-man | [] [] | - e2fsprogs | [] | - enscript | [] [] [] [] [] [] | - exif | [] [] [] [] [] [] | - fetchmail | [] [] [] | - findutils | [] [] [] [] [] [] | - flex | [] [] [] [] [] | - freedink | [] [] [] [] [] | - fusionforge | | - gas | | - gawk | [] | - gcal | | - gcc | | - gdbm | [] [] [] | - gettext-examples | [] [] [] [] [] [] [] [] | - gettext-runtime | [] [] [] [] [] [] [] [] [] | - gettext-tools | [] [] [] [] [] [] [] | - gjay | [] | - glunarclock | [] [] [] [] [] [] | - gnubiff | [] | - gnubik | [] [] [] [] | - gnucash | () () () () () [] | - gnuchess | [] [] | - gnulib | [] [] [] [] [] | - gnunet | | - gnunet-gtk | | - gold | | - gphoto2 | [] [] [] [] [] | - gprof | [] [] [] [] | - gramadoir | [] [] | - grep | [] [] [] [] [] [] | - grub | [] [] [] [] [] | - gsasl | [] [] [] | - gss | [] [] [] [] | - gst-plugins-bad | [] [] [] [] [] | - gst-plugins-base | [] [] [] [] [] [] | - gst-plugins-good | [] [] [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] [] [] | - gstreamer | [] [] [] [] [] [] [] | - gtick | [] [] [] [] [] | - gtkam | [] [] [] [] [] [] | - gtkspell | [] [] [] [] [] [] [] [] [] | - guix | | - guix-packages | | - gutenprint | [] [] | - hello | [] [] [] [] [] [] | - help2man | [] [] [] [] | - help2man-texi | [] | - hylafax | | - idutils | [] [] [] | - iso_15924 | [] () [] [] [] [] | - iso_3166 | [] [] [] [] () [] [] [] [] [] [] [] [] | - iso_3166_2 | [] () [] | - iso_4217 | [] [] () [] [] [] [] [] | - iso_639 | [] [] [] () [] [] [] [] [] [] | - iso_639_3 | [] () | - iso_639_5 | () [] | - jwhois | [] [] [] [] | - kbd | [] [] | - klavaro | [] [] [] [] [] | - ld | | - leafpad | [] [] [] [] [] [] [] [] | - libc | [] [] [] | - libexif | [] () [] | - libextractor | [] | - libgnutls | [] | - libgphoto2 | [] | - libgphoto2_port | [] [] [] [] [] | - libgsasl | [] [] [] [] | - libiconv | [] [] [] [] [] | - libidn | [] [] [] | - liferea | [] [] [] [] () [] [] | - lilypond | | - lordsawar | | - lprng | [] | - lynx | [] [] | - m4 | [] [] [] [] [] | - mailfromd | [] | - mailutils | [] | - make | [] [] [] | - man-db | [] [] [] | - man-db-manpages | [] [] [] | - midi-instruments | [] [] [] [] [] [] [] [] | - minicom | [] [] [] [] | - mkisofs | [] [] [] | - myserver | [] [] | - nano | [] [] [] [] [] [] | - opcodes | | - parted | [] [] [] [] [] [] | - pies | [] | - pnmixer | [] | - popt | [] [] [] [] [] [] | - procps-ng | [] | - procps-ng-man | [] | - psmisc | [] [] [] [] | - pspp | [] [] | - pushover | | - pwdutils | [] | - pyspread | [] [] | - radius | [] [] | - recode | [] [] [] [] [] [] [] [] | - recutils | [] [] | - rpm | [] | - rush | [] [] [] | - sarg | [] [] | - sed | [] [] [] [] [] [] [] [] | - sharutils | [] [] [] | - shishi | [] [] | - skribilo | [] | - solfege | [] [] [] | - solfege-manual | [] [] | - spotmachine | [] [] | - sudo | [] [] [] [] [] [] | - sudoers | [] [] [] [] | - sysstat | [] [] [] [] [] | - tar | [] [] [] [] [] | - texinfo | [] [] [] | - texinfo_document | [] [] | - tigervnc | [] [] [] | - tin | [] | - tin-man | | - tracgoogleappsa... | [] [] [] [] | - trader | [] [] | - util-linux | [] [] | - ve | [] [] [] | - vice | | - vmm | | - vorbis-tools | [] [] [] | - wastesedge | | - wcd | | - wcd-man | | - wdiff | [] [] [] [] [] | - wget | [] [] [] [] [] | - wyslij-po | [] [] [] [] | - xboard | [] [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] [] | - +------------------------------------------------+ - nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr - 7 3 6 114 1 12 88 32 82 3 40 45 7 101 - - sv sw ta te tg th tr uk ur vi wa wo zh_CN - +----------------------------------------------+ - a2ps | [] [] [] [] [] | - aegis | [] | - anubis | [] [] [] [] | - aspell | [] [] [] [] [] | - bash | [] [] [] [] | - bfd | [] [] [] | - binutils | [] [] [] | - bison | [] [] [] [] | - bison-runtime | [] [] [] [] [] [] | - buzztrax | [] [] [] | - ccd2cue | [] [] [] | - ccide | [] [] [] [] | - cflow | [] [] [] [] | - clisp | | - coreutils | [] [] [] | - cpio | [] [] [] [] [] | - cppi | [] [] [] [] | - cpplib | [] [] [] [] [] | - cryptsetup | [] [] [] | - datamash | [] [] [] | - denemo | [] | - dfarc | [] [] | - dialog | [] [] [] [] [] [] | - dico | [] | - diffutils | [] [] [] [] [] | - dink | [] | - direvent | [] [] | - doodle | [] [] | - dos2unix | [] [] [] [] | - dos2unix-man | [] [] [] | - e2fsprogs | [] [] [] [] | - enscript | [] [] [] [] | - exif | [] [] [] [] [] | - fetchmail | [] [] [] [] | - findutils | [] [] [] [] [] | - flex | [] [] [] [] | - freedink | [] [] [] | - fusionforge | | - gas | [] | - gawk | [] [] [] | - gcal | [] [] [] | - gcc | [] | - gdbm | [] [] | - gettext-examples | [] [] [] [] [] | - gettext-runtime | [] [] [] [] [] | - gettext-tools | [] [] [] [] [] | - gjay | [] [] [] | - glunarclock | [] [] [] [] | - gnubiff | [] [] | - gnubik | [] [] [] [] | - gnucash | () () () () [] | - gnuchess | [] [] [] | - gnulib | [] [] [] [] | - gnunet | | - gnunet-gtk | | - gold | [] [] | - gphoto2 | [] [] [] [] | - gprof | [] [] [] [] | - gramadoir | [] [] [] | - grep | [] [] [] [] [] | - grub | [] [] [] [] | - gsasl | [] [] [] [] | - gss | [] [] [] | - gst-plugins-bad | [] [] [] [] [] | - gst-plugins-base | [] [] [] [] [] | - gst-plugins-good | [] [] [] [] [] | - gst-plugins-ugly | [] [] [] [] [] | - gstreamer | [] [] [] [] [] | - gtick | [] [] [] | - gtkam | [] [] [] [] | - gtkspell | [] [] [] [] [] [] [] | - guix | | - guix-packages | | - gutenprint | [] [] [] [] | - hello | [] [] [] [] [] [] | - help2man | [] [] [] | - help2man-texi | [] | - hylafax | [] | - idutils | [] [] [] | - iso_15924 | [] () [] [] () [] | - iso_3166 | [] [] () [] [] () [] [] | - iso_3166_2 | () [] [] () [] | - iso_4217 | [] () [] [] () [] | - iso_639 | [] [] [] () [] [] () [] [] | - iso_639_3 | [] () [] [] () | - iso_639_5 | () [] () | - jwhois | [] [] [] [] | - kbd | [] [] [] [] | - klavaro | [] [] [] [] [] [] | - ld | [] [] [] [] [] | - leafpad | [] [] [] [] [] [] | - libc | [] [] [] [] [] | - libexif | [] [] () | - libextractor | [] [] | - libgnutls | [] [] [] [] | - libgphoto2 | [] [] [] | - libgphoto2_port | [] [] [] [] | - libgsasl | [] [] [] [] | - libiconv | [] [] [] [] [] | - libidn | () [] [] [] | - liferea | [] [] [] [] [] | - lilypond | [] | - lordsawar | | - lprng | [] | - lynx | [] [] [] [] | - m4 | [] [] [] | - mailfromd | [] [] | - mailutils | [] | - make | [] [] [] [] | - man-db | [] [] [] | - man-db-manpages | [] [] | - midi-instruments | [] [] [] [] [] [] | - minicom | [] [] | - mkisofs | [] [] [] | - myserver | [] | - nano | [] [] [] [] | - opcodes | [] [] [] | - parted | [] [] [] [] [] | - pies | [] [] | - pnmixer | [] [] [] | - popt | [] [] [] [] [] [] [] | - procps-ng | [] [] | - procps-ng-man | [] | - psmisc | [] [] [] [] | - pspp | [] [] [] | - pushover | [] | - pwdutils | [] [] | - pyspread | [] | - radius | [] [] | - recode | [] [] [] [] | - recutils | [] [] [] | - rpm | [] [] [] [] | - rush | [] [] | - sarg | | - sed | [] [] [] [] [] | - sharutils | [] [] [] [] | - shishi | [] [] | - skribilo | [] [] | - solfege | [] [] [] [] | - solfege-manual | [] | - spotmachine | [] [] [] | - sudo | [] [] [] [] [] | - sudoers | [] [] [] [] | - sysstat | [] [] [] [] [] | - tar | [] [] [] [] [] | - texinfo | [] [] [] | - texinfo_document | [] | - tigervnc | [] [] [] | - tin | [] | - tin-man | | - tracgoogleappsa... | [] [] [] [] [] | - trader | [] | - util-linux | [] [] [] [] | - ve | [] [] [] [] | - vice | () () | - vmm | | - vorbis-tools | [] [] | - wastesedge | | - wcd | [] [] [] | - wcd-man | [] | - wdiff | [] [] [] [] | - wget | [] [] [] | - wyslij-po | [] [] | - xboard | [] [] | - xdg-user-dirs | [] [] [] [] [] [] [] [] | - xkeyboard-config | [] [] [] [] | - +----------------------------------------------+ - sv sw ta te tg th tr uk ur vi wa wo zh_CN - 106 1 4 3 0 13 51 115 1 125 7 1 100 - - zh_HK zh_TW - +-------------+ - a2ps | | 30 - aegis | | 9 - anubis | | 19 - aspell | | 29 - bash | [] | 23 - bfd | | 11 - binutils | | 12 - bison | [] | 18 - bison-runtime | [] | 38 - buzztrax | | 9 - ccd2cue | | 10 - ccide | | 17 - cflow | | 16 - clisp | | 10 - coreutils | | 18 - cpio | | 20 - cppi | | 17 - cpplib | [] | 19 - cryptsetup | | 14 - datamash | | 11 - denemo | | 5 - dfarc | | 17 - dialog | [] | 42 - dico | | 6 - diffutils | | 22 - dink | | 10 - direvent | | 11 - doodle | | 12 - dos2unix | [] | 18 - dos2unix-man | | 9 - e2fsprogs | | 15 - enscript | | 21 - exif | | 27 - fetchmail | | 19 - findutils | | 29 - flex | [] | 19 - freedink | | 24 - fusionforge | | 3 - gas | | 5 - gawk | | 13 - gcal | | 8 - gcc | | 2 - gdbm | | 10 - gettext-examples | [] [] | 40 - gettext-runtime | [] [] | 35 - gettext-tools | [] | 24 - gjay | | 9 - glunarclock | [] | 27 - gnubiff | | 9 - gnubik | | 19 - gnucash | () | 6 - gnuchess | | 11 - gnulib | | 23 - gnunet | | 1 - gnunet-gtk | | 1 - gold | | 7 - gphoto2 | [] | 19 - gprof | | 21 - gramadoir | | 14 - grep | [] | 31 - grub | | 21 - gsasl | [] | 19 - gss | | 17 - gst-plugins-bad | | 21 - gst-plugins-base | | 27 - gst-plugins-good | | 32 - gst-plugins-ugly | | 34 - gstreamer | [] | 32 - gtick | | 19 - gtkam | | 24 - gtkspell | [] [] | 48 - guix | | 2 - guix-packages | | 0 - gutenprint | | 15 - hello | [] | 30 - help2man | | 18 - help2man-texi | | 5 - hylafax | | 5 - idutils | | 14 - iso_15924 | [] | 23 - iso_3166 | [] [] | 58 - iso_3166_2 | | 9 - iso_4217 | [] [] | 28 - iso_639 | [] [] | 46 - iso_639_3 | | 10 - iso_639_5 | | 2 - jwhois | [] | 20 - kbd | | 17 - klavaro | | 30 - ld | [] | 15 - leafpad | [] | 39 - libc | [] | 24 - libexif | | 10 - libextractor | | 5 - libgnutls | | 13 - libgphoto2 | | 10 - libgphoto2_port | [] | 19 - libgsasl | | 18 - libiconv | [] | 29 - libidn | | 17 - liferea | | 29 - lilypond | | 11 - lordsawar | | 3 - lprng | | 3 - lynx | | 19 - m4 | [] | 22 - mailfromd | | 4 - mailutils | | 6 - make | | 19 - man-db | | 15 - man-db-manpages | | 10 - midi-instruments | [] | 43 - minicom | [] | 17 - mkisofs | | 13 - myserver | | 9 - nano | [] | 30 - opcodes | | 12 - parted | [] | 23 - pies | | 4 - pnmixer | | 9 - popt | [] | 36 - procps-ng | | 5 - procps-ng-man | | 4 - psmisc | [] | 22 - pspp | | 13 - pushover | | 6 - pwdutils | | 8 - pyspread | | 6 - radius | | 9 - recode | | 31 - recutils | | 10 - rpm | [] | 13 - rush | | 10 - sarg | | 4 - sed | [] | 35 - sharutils | | 13 - shishi | | 7 - skribilo | | 7 - solfege | | 21 - solfege-manual | | 9 - spotmachine | | 11 - sudo | | 26 - sudoers | | 22 - sysstat | | 23 - tar | [] | 30 - texinfo | | 17 - texinfo_document | | 13 - tigervnc | | 14 - tin | [] | 7 - tin-man | | 1 - tracgoogleappsa... | [] | 22 - trader | | 12 - util-linux | | 13 - ve | | 14 - vice | | 1 - vmm | | 3 - vorbis-tools | | 13 - wastesedge | | 3 - wcd | | 8 - wcd-man | | 3 - wdiff | [] | 23 - wget | | 21 - wyslij-po | | 14 - xboard | | 10 - xdg-user-dirs | [] [] | 68 - xkeyboard-config | [] | 28 - +-------------+ - 89 teams zh_HK zh_TW - 166 domains 7 42 2809 - - Some counters in the preceding matrix are higher than the number of -visible blocks let us expect. This is because a few extra PO files are -used for implementing regional variants of languages, or language -dialects. - - For a PO file in the matrix above to be effective, the package to -which it applies should also have been internationalized and distributed -as such by its maintainer. There might be an observable lag between the -mere existence a PO file and its wide availability in a distribution. - - If Jun 2014 seems to be old, you may fetch a more recent copy of this -'ABOUT-NLS' file on most GNU archive sites. The most up-to-date matrix -with full percentage details can be found at -'http://translationproject.org/extra/matrix.html'. - -1.5 Using 'gettext' in new packages -=================================== - -If you are writing a freely available program and want to -internationalize it you are welcome to use GNU 'gettext' in your -package. Of course you have to respect the GNU Lesser General Public -License which covers the use of the GNU 'gettext' library. This means -in particular that even non-free programs can use 'libintl' as a shared -library, whereas only free software can use 'libintl' as a static -library or use modified versions of 'libintl'. - - Once the sources are changed appropriately and the setup can handle -the use of 'gettext' the only thing missing are the translations. The -Free Translation Project is also available for packages which are not -developed inside the GNU project. Therefore the information given above -applies also for every other Free Software Project. Contact -'coordinator@translationproject.org' to make the '.pot' files available -to the translation teams. diff -Nru hitori-3.22.4/aclocal.m4 hitori-3.31.0/aclocal.m4 --- hitori-3.22.4/aclocal.m4 2017-10-02 08:08:02.000000000 +0000 +++ hitori-3.31.0/aclocal.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,1220 +0,0 @@ -# generated automatically by aclocal 1.15 -*- Autoconf -*- - -# Copyright (C) 1996-2014 Free Software Foundation, Inc. - -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, -[m4_warning([this file was generated for autoconf 2.69. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically 'autoreconf'.])]) - -# Copyright (C) 2002-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.15' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.15], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.15])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to -# '$srcdir', '$srcdir/..', or '$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is '.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl -# Expand $ac_aux_dir to an absolute path. -am_aux_dir=`cd "$ac_aux_dir" && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ([2.52])dnl - m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], - [$1], [CXX], [depcc="$CXX" am_compiler_list=], - [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], - [$1], [UPC], [depcc="$UPC" am_compiler_list=], - [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES. -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE([dependency-tracking], [dnl -AS_HELP_STRING( - [--enable-dependency-tracking], - [do not reject slow dependency extractors]) -AS_HELP_STRING( - [--disable-dependency-tracking], - [speeds up one-time build])]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -AC_SUBST([am__nodep])dnl -_AM_SUBST_NOTMAKE([am__nodep])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[{ - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each '.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. -m4_define([AC_PROG_CC], -m4_defn([AC_PROG_CC]) -[_AM_PROG_CC_C_O -]) - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.65])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[AC_DIAGNOSE([obsolete], - [$0: two- and three-arguments forms are deprecated.]) -m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if( - m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), - [ok:ok],, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) - AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) -AM_MISSING_PROG([AUTOCONF], [autoconf]) -AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) -AM_MISSING_PROG([AUTOHEADER], [autoheader]) -AM_MISSING_PROG([MAKEINFO], [makeinfo]) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target (and possibly the TAP driver). The -# system "awk" is bad on some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES([CC])], - [m4_define([AC_PROG_CC], - m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES([CXX])], - [m4_define([AC_PROG_CXX], - m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES([OBJC])], - [m4_define([AC_PROG_OBJC], - m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], - [_AM_DEPENDENCIES([OBJCXX])], - [m4_define([AC_PROG_OBJCXX], - m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl -]) -AC_REQUIRE([AM_SILENT_RULES])dnl -dnl The testsuite driver may need to know about EXEEXT, so add the -dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This -dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) - fi -fi -dnl The trailing newline in this macro's definition is deliberate, for -dnl backward compatibility and to allow trailing 'dnl'-style comments -dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. -]) - -dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -dnl mangled by Autoconf and run in a shell conditional statement. -m4_define([_AC_COMPILER_EXEEXT], -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST([install_sh])]) - -# Copyright (C) 2003-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- -# From Jim Meyering - -# Copyright (C) 1996-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAINTAINER_MODE([DEFAULT-MODE]) -# ---------------------------------- -# Control maintainer-specific portions of Makefiles. -# Default is to disable them, unless 'enable' is passed literally. -# For symmetry, 'disable' may be passed as well. Anyway, the user -# can override the default with the --enable/--disable switch. -AC_DEFUN([AM_MAINTAINER_MODE], -[m4_case(m4_default([$1], [disable]), - [enable], [m4_define([am_maintainer_other], [disable])], - [disable], [m4_define([am_maintainer_other], [enable])], - [m4_define([am_maintainer_other], [enable]) - m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) -AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode's default is 'disable' unless 'enable' is passed - AC_ARG_ENABLE([maintainer-mode], - [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], - am_maintainer_other[ make rules and dependencies not useful - (and sometimes confusing) to the casual installer])], - [USE_MAINTAINER_MODE=$enableval], - [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) - AC_MSG_RESULT([$USE_MAINTAINER_MODE]) - AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) - MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST([MAINT])dnl -] -) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it is modern enough. -# If it is, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - AC_MSG_WARN(['missing' script is too old or missing]) -fi -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# -------------------- -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) - -# _AM_SET_OPTIONS(OPTIONS) -# ------------------------ -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Copyright (C) 1999-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_CC_C_O -# --------------- -# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC -# to automatically call this. -AC_DEFUN([_AM_PROG_CC_C_O], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([compile])dnl -AC_LANG_PUSH([C])dnl -AC_CACHE_CHECK( - [whether $CC understands -c and -o together], - [am_cv_prog_cc_c_o], - [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i]) -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -AC_LANG_POP([C])]) - -# For backward compatibility. -AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) - -# Copyright (C) 2001-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_RUN_LOG(COMMAND) -# ------------------- -# Run COMMAND, save the exit status in ac_status, and log it. -# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) -AC_DEFUN([AM_RUN_LOG], -[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD - ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - (exit $ac_status); }]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken - alias in your environment]) - fi - if test "$[2]" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT([yes]) -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi -AC_CONFIG_COMMANDS_PRE( - [AC_MSG_CHECKING([that generated files are newer than configure]) - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - AC_MSG_RESULT([done])]) -rm -f conftest.file -]) - -# Copyright (C) 2009-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# ("yes" being less verbose, "no" or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], [dnl -AS_HELP_STRING( - [--enable-silent-rules], - [less verbose build output (undo: "make V=1")]) -AS_HELP_STRING( - [--disable-silent-rules], - [verbose build output (undo: "make V=0")])dnl -]) -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -dnl -dnl A few 'make' implementations (e.g., NonStop OS and NextStep) -dnl do not support nested variable expansions. -dnl See automake bug#9928 and bug#10237. -am_make=${MAKE-make} -AC_CACHE_CHECK([whether $am_make supports nested variables], - [am_cv_make_support_nested_variables], - [if AS_ECHO([['TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi]) -if test $am_cv_make_support_nested_variables = yes; then - dnl Using '$V' instead of '$(V)' breaks IRIX make. - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AC_SUBST([AM_V])dnl -AM_SUBST_NOTMAKE([AM_V])dnl -AC_SUBST([AM_DEFAULT_V])dnl -AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) - -# Copyright (C) 2001-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor 'install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in "make install-strip", and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# AM_SUBST_NOTMAKE(VARIABLE) -# -------------------------- -# Public sister of _AM_SUBST_NOTMAKE. -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004-2014 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of 'v7', 'ustar', or 'pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -# -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AC_SUBST([AMTAR], ['$${TAR-tar}']) - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' - -m4_if([$1], [v7], - [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - - [m4_case([$1], - [ustar], - [# The POSIX 1988 'ustar' format is defined with fixed-size fields. - # There is notably a 21 bits limit for the UID and the GID. In fact, - # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 - # and bug#13588). - am_max_uid=2097151 # 2^21 - 1 - am_max_gid=$am_max_uid - # The $UID and $GID variables are not portable, so we need to resort - # to the POSIX-mandated id(1) utility. Errors in the 'id' calls - # below are definitely unexpected, so allow the users to see them - # (that is, avoid stderr redirection). - am_uid=`id -u || echo unknown` - am_gid=`id -g || echo unknown` - AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) - if test $am_uid -le $am_max_uid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi - AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) - if test $am_gid -le $am_max_gid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi], - - [pax], - [], - - [m4_fatal([Unknown tar format])]) - - AC_MSG_CHECKING([how to create a $1 tar archive]) - - # Go ahead even if we have the value already cached. We do so because we - # need to set the values for the 'am__tar' and 'am__untar' variables. - _am_tools=${am_cv_prog_tar_$1-$_am_tools} - - for _am_tool in $_am_tools; do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works. - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi - done - rm -rf conftest.dir - - AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) - AC_MSG_RESULT([$am_cv_prog_tar_$1])]) - -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - -m4_include([m4/appstream-xml.m4]) -m4_include([m4/ax_append_compile_flags.m4]) -m4_include([m4/ax_append_flag.m4]) -m4_include([m4/ax_append_link_flags.m4]) -m4_include([m4/ax_check_compile_flag.m4]) -m4_include([m4/ax_check_enable_debug.m4]) -m4_include([m4/ax_check_link_flag.m4]) -m4_include([m4/ax_code_coverage.m4]) -m4_include([m4/ax_compiler_flags.m4]) -m4_include([m4/ax_compiler_flags_cflags.m4]) -m4_include([m4/ax_compiler_flags_gir.m4]) -m4_include([m4/ax_compiler_flags_ldflags.m4]) -m4_include([m4/ax_generate_changelog.m4]) -m4_include([m4/ax_is_release.m4]) -m4_include([m4/ax_require_defined.m4]) -m4_include([m4/gettext.m4]) -m4_include([m4/gsettings.m4]) -m4_include([m4/iconv.m4]) -m4_include([m4/intlmacosx.m4]) -m4_include([m4/lib-ld.m4]) -m4_include([m4/lib-link.m4]) -m4_include([m4/lib-prefix.m4]) -m4_include([m4/libtool.m4]) -m4_include([m4/ltoptions.m4]) -m4_include([m4/ltsugar.m4]) -m4_include([m4/ltversion.m4]) -m4_include([m4/lt~obsolete.m4]) -m4_include([m4/nls.m4]) -m4_include([m4/pkg.m4]) -m4_include([m4/po.m4]) -m4_include([m4/progtest.m4]) -m4_include([m4/yelp.m4]) diff -Nru hitori-3.22.4/autogen.sh hitori-3.31.0/autogen.sh --- hitori-3.22.4/autogen.sh 2017-03-22 14:34:03.000000000 +0000 +++ hitori-3.31.0/autogen.sh 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ -#!/bin/sh -# Run this to generate all the initial makefiles, etc. -test -n "$srcdir" || srcdir=$(dirname "$0") -test -n "$srcdir" || srcdir=. - -olddir=$(pwd) - -cd $srcdir - -(test -f configure.ac) || { - echo "*** ERROR: Directory '$srcdir' does not look like the top-level project directory ***" - exit 1 -} - -# Use the style-checker as pre-commit and pre-applypatch hooks -if [ -d $srcdir/.git ]; then - if [ ! -L $srcdir/.git/hooks/pre-commit ]; then - ln -s ../../../libgames-support/style-checker $srcdir/.git/hooks/pre-commit && echo "Enabled pre-commit style checker." || : - fi - if [ ! -L $srcdir/.git/hooks/pre-applypatch ]; then - ln -s ../../../libgames-support/style-checker $srcdir/.git/hooks/pre-applypatch && echo "Enabled pre-applypatch style checker." || : - fi -fi - -# shellcheck disable=SC2016 -PKG_NAME=$(autoconf --trace 'AC_INIT:$1' configure.ac) - -if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then - echo "*** WARNING: I am going to run 'configure' with no arguments." >&2 - echo "*** If you wish to pass any to it, please specify them on the" >&2 - echo "*** '$0' command line." >&2 - echo "" >&2 -fi - -aclocal --install || exit 1 -autoreconf --verbose --force --install || exit 1 - -cd "$olddir" -if [ "$NOCONFIGURE" = "" ]; then - $srcdir/configure "$@" || exit 1 - - if [ "$1" = "--help" ]; then exit 0 else - echo "Now type 'make' to compile $PKG_NAME" || exit 1 - fi -else - echo "Skipping configure process." -fi diff -Nru hitori-3.22.4/build-aux/meson_post_install.py hitori-3.31.0/build-aux/meson_post_install.py --- hitori-3.22.4/build-aux/meson_post_install.py 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/build-aux/meson_post_install.py 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1,19 @@ +#!/usr/bin/env python3 + +import os +import subprocess + +install_prefix = os.environ['MESON_INSTALL_PREFIX'] +schemadir = os.path.join(install_prefix, 'share/glib-2.0/schemas') + +if not os.environ.get('DESTDIR'): + print('Compiling gsettings schemas…') + subprocess.call(['glib-compile-schemas', schemadir]) + + print('Updating icon cache…') + icon_cache_dir = os.path.join(install_prefix, 'share/icons/hicolor') + subprocess.call(['gtk-update-icon-cache', '-qtf', icon_cache_dir]) + + print('Updating desktop database…') + desktop_database_dir = os.path.join(install_prefix, 'share/applications') + subprocess.call(['update-desktop-database', '-q', desktop_database_dir]) diff -Nru hitori-3.22.4/ChangeLog hitori-3.31.0/ChangeLog --- hitori-3.22.4/ChangeLog 2017-10-02 08:11:28.000000000 +0000 +++ hitori-3.31.0/ChangeLog 1970-01-01 00:00:00.000000000 +0000 @@ -1,4437 +0,0 @@ -commit ed894965d65e9cde23814a4616594f9c6a3819ee -Author: Piotr Drąg -Date: Sat Sep 30 23:30:07 2017 +0200 - - Add Polish help screenshots - -A help/pl/figures/hitori_main_window.png - -commit 549fb211a01f2d1572cf211afc5ff56b8e5e9a7c -Author: Arash Mousavi -Date: Fri Sep 22 23:15:45 2017 +0330 - - Update Persian translations - -M po/fa.po - -commit e0ce44513d534332493c098051d16e90519939c5 -Author: Nathan Follens -Date: Thu Sep 21 08:27:04 2017 +0000 - - Add Dutch translation - -M po/LINGUAS -A po/nl.po - -commit b3a8527f99d79e7690f023636536de02b4a0603d -Author: Jordi Mas -Date: Sun Sep 10 09:08:52 2017 +0200 - - Fixes to Catalan translation - -M po/ca.po - -commit 05d92e8ee0e9d204f0788f9dc0e9de7d56e72021 -Author: Alain Lojewski -Date: Fri Sep 8 08:55:55 2017 +0000 - - Update French translation - -M po/fr.po - -commit 94284235070711644cf3d6ed252fadf29077d7b1 -Author: Alexander Shopov -Date: Sun Sep 3 10:12:39 2017 +0300 - - Updated Bulgarian translation - -M po/bg.po - -commit 080e23c0d47ac850b7c3cea1052b47d317a8a7ff -Author: Junyoul Lim -Date: Sat Sep 2 12:56:58 2017 +0000 - - Update Korean translation - -M po/ko.po - -commit a98de5a07a33a81ceb85c849b027f851629efb89 -Author: Alexander Shopov -Date: Fri Aug 18 23:04:42 2017 +0200 - - Updated Bulgarian translation - -M po/bg.po - -commit 779d0f76afc89628b7c5deba9a5d74ae07a87a77 -Author: Piotr Drąg -Date: Thu Aug 31 02:14:19 2017 +0200 - - Add Polish help translation - -M help/Makefile.am -A help/pl/pl.po -M po/pl.po - -commit 31487b75ad95b62bde99d53dd9c312a5b07a8d68 -Author: Muhammet Kara -Date: Sun Aug 13 15:57:00 2017 +0000 - - Update Turkish translation - -M po/tr.po - -commit 952bdf197a6c17b2387e8bc2752087cd32957568 -Author: Ani Peter -Date: Sun Aug 6 06:04:51 2017 +0000 - - Add Malayalam translation - -M po/LINGUAS -A po/ml.po - -commit 8fdd2143f36a64e5cf5de9df03fc99f89179efc8 -Author: Philip Withnall -Date: Sun Apr 30 23:22:12 2017 +0100 - - Release version 3.22.3 - - Signed-off-by: Philip Withnall - -M NEWS -M configure.ac - -commit ce1636be85c224a0cce5ebd7c02c943dcdee725a -Author: Philip Withnall -Date: Sun Apr 30 23:17:56 2017 +0100 - - interface: Don’t require new GTK+ API - - If we’re compiling against GTK+ older than 3.22.0, use the old - gtk_show_uri() API rather than the new one. - - This is a follow up to commit 3b835d2. - - Signed-off-by: Philip Withnall - -M src/interface.c - -commit e830f24800cd702378848ad6b722aa11b83e7645 -Author: Yuras Shumovich -Date: Tue Apr 25 08:33:10 2017 +0000 - - Update Belarusian translation - -M po/be.po - -commit b03c1fa428f5aba710ec015f306589ae7bd9bfb1 -Author: Yuras Shumovich -Date: Tue Apr 25 08:11:16 2017 +0000 - - Add Belarusian translation - -M po/LINGUAS -A po/be.po - -commit fc846dd553ff4b18c4b7e6743d1d50813befced7 -Author: Tom Tryfonidis -Date: Thu Apr 6 10:03:38 2017 +0000 - - Update Greek translation - -M po/el.po - -commit cfff4f63f9b5138077114c86ce6fd6242d3eca73 -Author: Daniel Korostil -Date: Wed Mar 22 09:22:19 2017 +0200 - - Updated Ukrainian translation - -M po/uk.po - -commit 3b835d21bb25e7b8f89161e0b70592c053549b35 -Author: Javier Jardón -Date: Mon Mar 20 21:51:37 2017 +0000 - - src/interface.c: Use gtk_show_uri_on_window() - - Instead deprecated gtk_show_uri() - -M src/interface.c - -commit d29910535b1e60d1bdb2d1074208bdd3ced0af13 -Author: Rūdolfs Mazurs -Date: Mon Mar 20 21:12:02 2017 +0200 - - Update Latvian translation - -M po/lv.po - -commit e04bddabec9a4762bebf1015a23adde16e367356 -Author: Philip Withnall -Date: Thu Mar 16 11:52:10 2017 +0000 - - flatpak: Add flatpak manifests for stable and unstable branches - - Drop the old xdg-app based build rules for building a bundle file, in - favour of the new flatpak manifests which can be used to generate a - repository with the command: - flatpak-builder --repo=repo build-dir - flatpak/org.gnome.Hitori-stable.json - - This repository can then be turned into a bundle using the - instructions - at - http://docs.flatpak.org/en/latest/distributing-applications.html#single-file-bundles. - - The use of manifest files means it should now be possible for - Hitori to - be built nightly: - - https://wiki.gnome.org/Projects/SandboxedApps/Building - - Signed-off-by: Philip Withnall - -M Makefile.am -A flatpak/org.gnome.Hitori-stable.json -A flatpak/org.gnome.Hitori-unstable.json - -commit abd2bdfa5fb7625276681b1899c148c707a1cf67 -Author: Yuri Myasoedov -Date: Tue Mar 14 21:06:50 2017 +0400 - - Updated Russian translation - -M po/ru.po - -commit 6f6528a0eb7e9fb95e6382a768ddf41861d7ec5c -Author: Jordi Mas -Date: Sun Mar 12 08:36:13 2017 +0100 - - Update Catalan translation - -M po/ca.po - -commit b69f379d20b8a7c6cb3bb132c4a12bec208da5f1 -Author: Fran Dieguez -Date: Sat Mar 11 02:44:10 2017 +0000 - - Update Galician translation - -M po/gl.po - -commit 46705840468b19602067d2019143eacd839f7608 -Author: Philip Withnall -Date: Mon Mar 6 00:18:08 2017 +0000 - - interface: Improve rendering of externals borders - - Fix the rendering so that half of the external border lines are not - chopped off due to the fact that the lines are drawn centred on the - coordinates given to Cairo. This is possible by considering the whole - rendering area as needing to be BORDER_LEFT (the width) wider than it - actually is, and ensuring that all the cell size calculations are done - as floating point so as to not introduce rounding errors. - - https://bugzilla.gnome.org/show_bug.cgi?id=732776 - -M src/interface.c -M src/main.h - -commit f27423093152f3c80255d2d9d84b61f2148c9d81 -Author: Philip Withnall -Date: Sun Mar 5 19:02:28 2017 +0000 - - Release version 3.22.2 - -M NEWS -M configure.ac - -commit 184d1033a8fd4264f636f6ef172c8b5b8f0ddde8 -Author: Chao-Hsiung Liao -Date: Tue Feb 28 09:19:56 2017 +0000 - - Update Chinese (Taiwan) translation - -M po/zh_TW.po - -commit 77f75aa3d3dabaa2c590ad0685157f8c2dbe8711 -Author: Joe Hansen -Date: Mon Feb 27 00:39:44 2017 +0100 - - Updated Danish translation - -M po/da.po - -commit 0d366e46dea577038d82729afdb5ee139b72f463 -Author: Joe Hansen -Date: Mon Feb 27 00:11:56 2017 +0100 - - Updated Danish translation - -M po/da.po - -commit 2009e6ff7b39db78312c68caaf5975f6c080865b -Author: Fran Dieguez -Date: Sun Feb 26 22:50:33 2017 +0100 - - Updated Galician translations - -M po/gl.po - -commit d959712aff9bb915bdf05e53863e3b827ea48f07 -Author: Мирослав Николић -Date: Sun Feb 26 09:17:34 2017 +0100 - - Updated Serbian translation - -M po/sr.po -M po/sr@latin.po - -commit 766195ccb4356380d9ed159e27b31114310d8fdf -Author: Inaki Larranaga Murgoitio -Date: Sun Feb 19 19:38:18 2017 +0100 - - Update Basque language - -M po/eu.po - -commit 7f275c4648f69c1ee94513e557fc1e6a0b645063 -Author: Kjartan Maraas -Date: Sun Feb 19 17:52:08 2017 +0100 - - Updated Norwegian bokmål translation. - -M po/nb.po - -commit 9624f67794932eefb58e17d6d628bbeaf1ec62af -Author: Philip Withnall -Date: Tue Feb 14 23:07:40 2017 +0000 - - build: Validate .desktop file at make check time - - If desktop-file-validate is available; it’s a soft dependency. - - Signed-off-by: Philip Withnall - -M Makefile.am -M configure.ac - -commit a3b56b28d74545284c35f925e493046acdb37876 -Author: Philip Withnall -Date: Tue Feb 14 23:07:17 2017 +0000 - - build: Eliminate a bash-ism in check-builder - - Signed-off-by: Philip Withnall - -M Makefile.am - -commit f12f38b4e3a2391d9f744103018a8703f50455a4 -Author: Matej Urbančič -Date: Tue Feb 14 09:11:13 2017 +0100 - - Updated Slovenian translation - -M po/sl.po - -commit 0b82272dcc6699661d843c2690319965bcbec28f -Author: Philip Withnall -Date: Mon Feb 13 21:58:15 2017 +0000 - - Release version 3.22.1 - -M NEWS -M configure.ac - -commit ee376c6166d85a38b1865cefa0d383c0a644b609 -Author: Philip Withnall -Date: Mon Feb 13 21:52:48 2017 +0000 - - po: Don’t regenerate .po files each time .pot changes - - Otherwise they will change on most commits. Instead, rely on - translators - to update them before translating. - -M po/Makevars - -commit 4e28378e5235a89924e344b463015952faf2d413 -Author: Kukuh Syafaat -Date: Mon Feb 13 07:10:01 2017 +0000 - - Update Indonesian translation - -M po/id.po - -commit c24904af2dad375a4503b11d670ca2b4ad6b39ca -Author: Mandy Wang -Date: Fri Feb 10 18:06:29 2017 +0800 - - Update zh_CN translation - -M po/zh_CN.po - -commit 042980133eeccfbd6422c6cefb338e5b28375bc6 -Author: Alexandre Franke -Date: Fri Feb 3 15:59:31 2017 +0000 - - Update French translation - -M po/fr.po - -commit 68360a3d56637c8cdba38935bcd5e15c582184d3 -Author: Dušan Kazik -Date: Sun Jan 22 14:12:32 2017 +0000 - - Update Slovak translation - -M po/sk.po - -commit 581590055a075d41de84421dfdb2339d7678d79a -Author: Gianvito Cavasoli -Date: Fri Jan 20 14:59:32 2017 +0000 - - Update Italian translation - -M po/it.po - -commit 12112f6f635e766680e8a292d090318ab5476b03 -Author: Daniel Mustieles -Date: Mon Jan 16 21:33:57 2017 +0100 - - Updated Spanish translation - -M po/es.po - -commit 35b2ef26c8740cb06d1555009b7d705ca5e620e3 -Author: Aurimas Černius -Date: Sat Jan 7 13:57:18 2017 +0200 - - Updated Lithuanian translation - -M po/lt.po - -commit db9795cd22f27a9734b8371c1e4f882290ea34c5 -Author: Tiago Santos -Date: Mon Jan 2 10:03:50 2017 +0000 - - Update Portuguese translation - -M po/pt.po - -commit 069e79a8dbb917d3914415594bb481ad0bf91886 -Author: Balázs Meskó -Date: Thu Dec 29 11:39:21 2016 +0000 - - Update Hungarian translation - -M po/hu.po - -commit 5f6e38d49a9b025a2b92d6abf6b32beef5726cae -Author: Mario Blättermann -Date: Thu Dec 29 10:52:24 2016 +0000 - - Update German translation - -M po/de.po - -commit b4957e6935186c05a9dcf836190022f0b2b09abc -Author: Fabio Tomat -Date: Wed Dec 28 21:34:32 2016 +0000 - - Update Friulian translation - -M po/fur.po - -commit 67ca629c3d50d235592c51b5a0fa6ca256b3c0ba -Author: Rafael Fontenelle -Date: Mon Dec 26 08:43:08 2016 +0000 - - Update Brazilian Portuguese translation - -M po/pt_BR.po - -commit 197c7564adea736070eb54181a912a9c92d95eab -Author: Anders Jonsson -Date: Sun Dec 25 21:32:00 2016 +0000 - - Update Swedish translation - -M po/sv.po - -commit 1cf91c6be02df48859a403ce7113eb6d6917acd3 -Author: Piotr Drąg -Date: Sun Dec 25 21:23:24 2016 +0100 - - Update Polish translation - -M po/pl.po - -commit 18a13e488c3d981409c06e23d5228b18e8d2658a -Author: Marek Černocký -Date: Sun Dec 25 17:51:06 2016 +0100 - - Updated Czech translation - -M po/cs.po - -commit 7967b55995763d5eb1457261502bacd2f00dc8f2 -Author: Jiri Grönroos -Date: Sun Dec 25 12:55:42 2016 +0000 - - Update Finnish translation - -M po/fi.po - -commit 57f5079de84433efdab60861927e5ae350a00933 -Author: Piotr Drąg -Date: Sat Dec 24 19:32:53 2016 +0100 - - Add a translator comment to the .desktop file - -M data/org.gnome.Hitori.desktop.in - -commit 2072139e48a418b37374a70a23aded3f47792dbf -Author: Philip Withnall -Date: Thu Jun 11 19:18:51 2015 +0100 - - build: Port from intltool to upstream gettext - - Since version 0.19.8, gettext has supported everything we need for - localisation, and in an architecturally nicer way than intltool. Port - to - it and drop the horrendous XML hacks from our AppData file. - - This drops the dependency on intltool and adds a dependency on gettext - 0.19.8. - -M Makefile.am -M autogen.sh -M configure.ac -M data/org.gnome.Hitori.appdata.xml.in -M data/org.gnome.Hitori.desktop.in -A po/Makevars -M po/POTFILES.in -M src/interface.c -M src/main.c - -commit bdaaaaac677864fb35f4a1ea72b0072bf540c392 -Author: Philip Withnall -Date: Sun Feb 22 20:12:02 2015 +0000 - - build: Port to AX_GENERATE_CHANGELOG - - This simplifies the build logic to generate the ChangeLog. - - AX_GENERATE_CHANGELOG comes from autoconf-archive (or, in GNOME, the - m4-common mirror of autoconf-archive). - -A ChangeLog -M Makefile.am -M configure.ac - -commit a2673166bde308c06fd4c636987e4dc8f0b07681 -Author: Philip Withnall -Date: Fri Dec 23 23:42:49 2016 +0000 - - build: Add validation checks for the UI files - -M Makefile.am -M configure.ac - -commit 7deab83d921149fab38fbc3fd59852dd16f079f2 -Author: Philip Withnall -Date: Mon Dec 5 18:17:55 2016 +0000 - - WIP work to check gtk-builder files - -M Makefile.am - -commit 7ee7ea1a169554c34a86d80e045f230e4ee6f354 -Author: Fabio Tomat -Date: Tue Nov 15 08:53:44 2016 +0000 - - Update Friulian translation - -M po/fur.po - -commit 0b2a142961c7971f78d27f99352de26570b3b5e0 -Author: liushuyu -Date: Sun Oct 30 02:36:45 2016 +0800 - - Update zh_CN translation - -M po/zh_CN.po - -commit 122877a9807a6617cb0ec42391fc07937b8029c8 -Author: Ask Hjorth Larsen -Date: Sun Oct 2 17:40:45 2016 +0200 - - Updated Danish translation of docs by scootergrisen - -M help/da/da.po - -commit bb07c7cada0f93186ca4d65a93ca3a5116f6d57b -Author: Philip Withnall -Date: Tue Sep 20 16:41:12 2016 -0700 - - build: Use HTTPS download link in DOAP file - -M hitori.doap - -commit 6be3631122610deea6f7fda3d1c8531bb43d7e70 -Author: Philip Withnall -Date: Tue Sep 20 08:29:47 2016 -0700 - - Release version 3.22.0 - -M NEWS -M configure.ac - -commit 6a14bc04e1ae261819d41d92e55a28e2f9fc257e -Author: Philip Withnall -Date: Mon Sep 19 10:04:34 2016 -0700 - - data: Add OARS rating data - -M data/org.gnome.Hitori.appdata.xml.in - -commit b46891c1e8062fd25fddee5802ef9261b8bdfe96 -Author: Arash Mousavi -Date: Wed Sep 14 11:38:21 2016 +0430 - - [l10n] update Persian translations - -M po/LINGUAS -A po/fa.po - -commit db4baa5d5b5a6724fa4cfb109a703e19daa5843e -Author: Piotr Drąg -Date: Mon Aug 22 21:13:37 2016 +0200 - - Updated Polish translation - -M po/pl.po - -commit 5fdce68241a63b469039fe24d8ac298b5dafff47 -Author: Philip Withnall -Date: Fri Aug 12 12:31:33 2016 +0200 - - data: Add translation URI to org.gnome.Hitori.appdata.xml - -M data/org.gnome.Hitori.appdata.xml.in - -commit 15e59e2d690af2f2cb66d5534baf135b6b731a40 -Author: Piotr Drąg -Date: Sat Jul 23 21:33:16 2016 +0200 - - Add Language headers to po files - - Future versions of gettext will fail if this header is missing. - -M po/ca@valencia.po -M po/en_GB.po -M po/es.po -M po/fr.po -M po/ne.po -M po/pa.po -M po/sl.po -M po/sr@latin.po -M po/vi.po -M po/zh_HK.po - -commit 68dff62b892403f0aa4b78140687b2fb11b9fae7 -Author: Anders Jonsson -Date: Tue Jun 14 20:18:28 2016 +0000 - - Updated Swedish translation - -M help/sv/sv.po - -commit 361a4897cb24d3614414134b05c20824e6622deb -Author: Cédric Valmary -Date: Mon May 30 19:58:27 2016 +0000 - - Updated Occitan translation - -M po/oc.po - -commit eb5231f4049d75de65a7abe3e3905bfb18dd5877 -Author: Cédric Valmary -Date: Thu May 5 19:54:35 2016 +0000 - - Updated Occitan translation - -M po/oc.po - -commit 93de3ac8c311963a606d8603a53cd8d9c8319f77 -Author: GNOME Translation Robot -Date: Wed Apr 27 18:53:09 2016 +0000 - - Updated Portuguese translation - -M po/pt.po - -commit c3ea82242fb931f09a7684306f8c35826f358dba -Author: Fabio Tomat -Date: Fri Apr 8 08:19:57 2016 +0000 - - Updated Friulian translation - -M po/fur.po - -commit 77901639f87691b82864b055162186a2be69f678 -Author: Philip Withnall -Date: Mon Mar 21 19:08:53 2016 +0000 - - Release version 3.20.0 - -M NEWS -M configure.ac - -commit 82b27a3cce8d30961bc723c9fb15b0243b158c38 -Author: Gabor Kelemen -Date: Sat Mar 19 10:45:53 2016 +0100 - - Updated Hungarian help translation - -M help/hu/hu.po - -commit 2dc4b349a2a50f482707c18be0f800b92d2469f0 -Author: Gabor Kelemen -Date: Sat Mar 19 10:43:37 2016 +0100 - - Added Hungarian help image - -A help/hu/figures/hitori_main_window.png - -commit 1a8a1698debdd4534a42307106179ae05157cf01 -Author: Philip Withnall -Date: Wed Mar 9 00:21:59 2016 +0000 - - interface: Use state from GtkStyleContext - - Instead of assuming the widget will be in a particular state when - drawing, explicitly get and set the widget state. This fixes a warning - with newer versions of GTK+. - - https://bugzilla.gnome.org/show_bug.cgi?id=763245 - -M src/interface.c - -commit 7626ed3f8e5de9e1564d644747a44f2397b57c66 -Author: Philip Withnall -Date: Wed Mar 9 00:11:59 2016 +0000 - - build: Update autogen.sh from GNOME template - - https://wiki.gnome.org/Projects/GnomeCommon/Migration#autogen.sh - - This fixes an issue with running autogen.sh with builddir ≠ srcdir. - -M autogen.sh - -commit fefb538ed045e2fc78234365eed2b309d3311396 -Author: Cédric Valmary -Date: Fri Mar 4 15:42:48 2016 +0000 - - Updated Occitan translation - -M po/oc.po - -commit edeeeb07ea1cbcb234fb78142f7aef643f75928d -Author: Philip Withnall -Date: Thu Mar 3 20:40:08 2016 +0000 - - build: Remove unused CPPFLAGS variables - - These two C preprocessor variables were not used anywhere. - -M Makefile.am - -commit b91ab2d3aed8429774439edc92b3ce90cddf60ec -Author: Philip Withnall -Date: Thu Mar 3 20:39:21 2016 +0000 - - build: Fix definition of PACKAGE_LOCALE_DIR - - This is passed to bindtextdomain() to allow it to find translations, - so - needs to be correct for translations to work. - - https://bugzilla.gnome.org/show_bug.cgi?id=763056 - -M Makefile.am - -commit 301a9b4cd200b732d3caeda9112a0db44dffe2cb -Author: Richard Hughes -Date: Mon Feb 1 12:01:02 2016 +0000 - - Fix the AppData application ID to reflect reality - -M data/org.gnome.Hitori.appdata.xml.in - -commit 15370fae886616b06fc39fd5ddb674c3644f669d -Author: Sahil Sareen -Date: Sat Jan 30 12:32:47 2016 +0530 - - Change PKG_CHECK_MODULES to stick to GNOME games style - -M configure.ac - -commit 9757f0c8feeb925cf875bef01ddcc6d4edb11d58 -Author: Mario Blättermann -Date: Wed Jan 27 19:45:38 2016 +0100 - - Updated German translation - -M po/de.po - -commit faa4ea8e594c174b3b322f8196c9bd32a6e53a44 -Author: Gabor Kelemen -Date: Wed Jan 27 00:24:12 2016 +0100 - - Fix typo (duplicat) introduced in - a56b0c2ec7108f282eb631b329a551fc7714a0bc - -M data/org.gnome.Hitori.appdata.xml.in - -commit 7c48b3f30e6e84cd41f99a1b3928e989b4e09278 -Author: Mario Blättermann -Date: Mon Jan 25 21:10:28 2016 +0100 - - Updated German translation - -M po/de.po - -commit a56b0c2ec7108f282eb631b329a551fc7714a0bc -Author: Richard Hughes -Date: Mon Jan 25 15:19:45 2016 +0000 - - Update the AppData to spec version 0.7+ - -M data/org.gnome.Hitori.appdata.xml.in - -commit 9551ed3bae2205141dfa186d063bb1f3d8371689 -Author: Alexander Shopov -Date: Fri Jan 15 21:36:40 2016 +0200 - - Added Bulgarian translation - -M po/LINGUAS -A po/bg.po - -commit ee46c2fe8577498b75b7c037b14a6641e6230d70 -Author: Sahil Sareen -Date: Tue Jan 12 23:29:16 2016 +0530 - - Avoid messing with the user namespace - -M Makefile.am - -commit 70a475367f770928bfa3539f6dd4253eea090d4b -Author: Sahil Sareen -Date: Sun Dec 27 19:24:28 2015 +0530 - - Add a pre-commit and pre-applypatch git hook - -M autogen.sh - -commit 5d3ed6d2ad6592f542853162506f7d54bfe7a066 -Author: Michael Catanzaro -Date: Fri Dec 11 13:05:54 2015 +0100 - - Update appdata - -M data/org.gnome.Hitori.appdata.xml.in - -commit bba630ec3265bc7518a46a707949437a74711083 -Author: Aurimas Černius -Date: Fri Nov 20 21:30:38 2015 +0200 - - Fixed error in Lithuanian translation - -M po/lt.po - -commit 833bf056d435880e4bcb61ac3bc84c6e32ec07a1 -Author: Philip Withnall -Date: Thu Nov 19 12:24:43 2015 +0000 - - build: Allow the bundle access to the user’s home directory - - This completely undermines the sandboxing, but fixes DConf/GSettings: - https://tecnocode.co.uk/2015/11/19/hitori-available-as-an-xdg-app-preview/comment-page-1/#comment-6494. - -M Makefile.am - -commit e783b850d936d20b4e1e3e6b3b287996bdec1f21 -Author: Philip Withnall -Date: Thu Nov 19 11:40:39 2015 +0000 - - src: Fix references to old icon name - - Use the new icon name instead. - -M data/org.gnome.Hitori.desktop.in -M src/interface.c -M src/main.c - -commit fa5f96a84d12aa0bdc0cbf401249eb9dd0329d82 -Author: Philip Withnall -Date: Thu Nov 19 11:27:26 2015 +0000 - - Release version 3.19.1 - -M NEWS -M configure.ac - -commit 1884bbd1c2bd1e581ef0209a8f5f7325eaafb1fa -Author: Philip Withnall -Date: Thu Nov 19 11:15:35 2015 +0000 - - build: Add build rules for making an xdg-app bundle - - These are more like documentation than an actual recipe which is going - to work in every situation. - -M Makefile.am - -commit 7aa30ce4c7f414f1d32f876a5f68a88e75dfae71 -Author: Philip Withnall -Date: Thu Nov 19 11:14:56 2015 +0000 - - build: Use correct prefix on icons, desktop file and appdata file - - Use the app-centric prefix ‘org.gnome.Hitori’ rather than - ‘hitori’. This - makes us play better with xdg-app. - -M Makefile.am -R100 data/icons/16x16/hitori.png -data/icons/16x16/org.gnome.Hitori.png -R100 data/icons/16x16/hitori.svg -data/icons/16x16/org.gnome.Hitori.svg -R100 data/icons/22x22/hitori.png -data/icons/22x22/org.gnome.Hitori.png -R100 data/icons/22x22/hitori.svg -data/icons/22x22/org.gnome.Hitori.svg -R100 data/icons/32x32/hitori.png -data/icons/32x32/org.gnome.Hitori.png -R100 data/icons/32x32/hitori.svg -data/icons/32x32/org.gnome.Hitori.svg -R100 data/icons/48x48/hitori.png -data/icons/48x48/org.gnome.Hitori.png -R100 data/icons/48x48/hitori.svg -data/icons/48x48/org.gnome.Hitori.svg -R100 data/icons/symbolic/hitori-symbolic.svg -data/icons/symbolic/org.gnome.Hitori-symbolic.svg -R100 data/hitori.appdata.xml.in -data/org.gnome.Hitori.appdata.xml.in -R100 data/hitori.desktop.in data/org.gnome.Hitori.desktop.in -M po/POTFILES.in - -commit e15eae666d383be1d992f0886cbc3bfdbca0f5e2 -Author: Cédric Valmary -Date: Tue Nov 10 14:00:30 2015 +0000 - - Added Occitan translation - -M po/LINGUAS -A po/oc.po - -commit 119d1a33118f3094fa2a1ad4affce9554fd7e093 -Author: Christian Kirbach -Date: Thu Nov 5 22:28:37 2015 +0000 - - Updated German translation - -M help/de/de.po - -commit 611ec5c2bebe4deb2cdea9e736a65fd9bf424259 -Author: Bernd Homuth -Date: Sat Sep 19 09:30:26 2015 +0000 - - Updated German translation - -M po/de.po - -commit 092267a6ec79c9896462e46dda7582b11194e519 -Author: yassine birig -Date: Mon Sep 14 14:27:28 2015 +0000 - - Added Arabic translation - -M po/LINGUAS -A po/ar.po - -commit 5f4164f1f4df7b76848457f4e47aa93635a18805 -Author: Piotr Drąg -Date: Tue Aug 25 14:32:01 2015 +0200 - - Updated Polish translation - -M po/pl.po - -commit 37a95cf7563f7b93c5a96b0dece019fb709603df -Author: Pedro Albuquerque -Date: Wed Jul 1 22:05:16 2015 +0000 - - Added Portuguese translation - -M po/LINGUAS -A po/pt.po - -commit 263efcc10124ac45d70d88cfc66e1b97c11e5c60 -Author: Ting-Wei Lan -Date: Sat Jun 6 09:20:02 2015 +0800 - - build: Fix -Werror build for clang - - This prevents 'void function should not return void expression' - warning. - - https://bugzilla.gnome.org/show_bug.cgi?id=750482 - -M src/generator.c - -commit 69e8fdbff8fc65c2729c7db57da982bcf4c8ca2a -Author: Erik Sköldås -Date: Sun Jun 7 11:57:08 2015 +0000 - - Updated Swedish translation - -M help/sv/sv.po - -commit b41f0fe353cbe6825fdeffca8870e51a1a69dc0e -Author: Philip Withnall -Date: Wed Mar 11 12:23:00 2015 +0000 - - build: Add missing AC_CHECK_FUNCS call for atexit() - - The generated GResource code uses it. Spotted by autoscan. Thanks, - autoscan! - -M configure.ac - -commit 696dc979269f4d5239ae8e0bdb81d6619f451204 -Author: Philip Withnall -Date: Wed Mar 11 12:20:06 2015 +0000 - - build: Use AX_COMPILER_FLAGS - - Switch from GNOME_COMPILE_WARNINGS to AX_COMPILER_FLAGS. This - integrates - better with CI systems, allows easy disabling of -Werror, and - integrates - with AX_IS_RELEASE to automatically disable errors when building - releases. - - https://wiki.gnome.org/Projects/GnomeCommon/Migration - -M Makefile.am -M configure.ac - -commit 4498b2f8313a8bab3eef95f215e01d8863580ff4 -Author: Philip Withnall -Date: Wed Mar 11 12:14:39 2015 +0000 - - build: Remove GNOME_MAINTAINER_MODE_DEFINES - - It does nothing relevant any more. - - https://wiki.gnome.org/Projects/GnomeCommon/Migration - -M configure.ac - -commit 1a99cdb1f21ff7be2312ff623baed4958bff5da6 -Author: Philip Withnall -Date: Wed Mar 11 12:11:25 2015 +0000 - - build: Use AX_CHECK_ENABLE_DEBUG - - Drop manual debug code in configure.ac. The --enable-debug option to - configure remains unchanged. AX_CHECK_ENABLE_DEBUG is automatically - hooked up to AX_IS_RELEASE, so debug mode will automatically be - disabled - for release builds. - - https://wiki.gnome.org/Projects/GnomeCommon/Migration - -M configure.ac - -commit 712afbac3a47d3d5915bae6e67ef087d687d948c -Author: Philip Withnall -Date: Wed Mar 11 12:07:44 2015 +0000 - - build: Use AX_IS_RELEASE - - Check for the presence of a git repository to determine whether things - like compiler warnings should be fatal. The warnings themselves - will be - hooked up later. - - This adds an implicit dependency on autoconf-archive or GNOME’s - m4-common. These are pulled in by JHBuild, and the relevant macros are - automatically distributed in tarballs — so the dependencies only - need to - be explicitly installed if you are building from git without using - JHBuild. This is an unsupported use case. - - Note that AC_CONFIG_MACRO_DIR() has already been added to - configure.ac. - - https://wiki.gnome.org/Projects/GnomeCommon/Migration - -M configure.ac - -commit 3c04bf889c5d99303f71213367eeca8b3962800b -Author: Philip Withnall -Date: Wed Mar 11 12:42:20 2015 +0000 - - build: Use AX_CODE_COVERAGE - - Port the existing code coverage support to AX_CODE_COVERAGE. It is now - controlled by --enable-code-coverage, rather than --enable-debug. - - https://wiki.gnome.org/Projects/GnomeCommon/Migration - -M Makefile.am -M configure.ac - -commit ba45cd7868866bf38d1759b83fe32e08ccb10de1 -Author: Philip Withnall -Date: Wed Mar 11 12:24:07 2015 +0000 - - build: Add ACLOCAL_AMFLAGS to Makefile.am - - So that aclocal knows where local macros are. - - https://wiki.gnome.org/Projects/GnomeCommon/Migration - -M Makefile.am - -commit 239af91a7d054237794b47850d0865067bedb98e -Author: Philip Withnall -Date: Wed Mar 11 12:06:18 2015 +0000 - - build: Stop using gnome-autogen.sh - - https://wiki.gnome.org/Projects/GnomeCommon/Migration - -M autogen.sh - -commit 08235c3fa1a5a2bf68d3370d86660f4b822f3bda -Author: Daniel Martinez -Date: Mon May 4 01:04:01 2015 +0200 - - Add Aragonese translation - -M po/LINGUAS -A po/an.po - -commit 1762dbd153f5dcdfebc86fb799c9395b8ca173dd -Author: Philip Withnall -Date: Sat May 2 18:49:59 2015 +0100 - - Release version 3.16.1 - -M NEWS -M configure.ac - -commit a8050fe58513147a2b7d3b149096f0695588c272 -Author: Philip Withnall -Date: Sat May 2 18:49:17 2015 +0100 - - build: Add new symbolic icon to EXTRA_DIST - - With the other icons. Fixes distcheck. - -M Makefile.am - -commit 7a8ffb30d8e695d04446ddc30d6c20cf0d9e4358 -Author: Jakub Steiner -Date: Thu Apr 2 15:08:23 2015 +0200 - - icon: provide a symbolic variant of teh app icon - - since 3.16 the high contrast accessible theme is - covered by the recolorable symbolic variant of the app icon. - - The symbolic size has been introduced to hicolor to cope with - the nominal size of 16x16 rather than the backward compatible - 128x128. - - https://bugzilla.gnome.org/show_bug.cgi?id=747238 - -M Makefile.am -A data/icons/symbolic/hitori-symbolic.svg - -commit cca8ba3974ac6bdd7c18508e325dc2281a42f62b -Author: Kalev Lember -Date: Thu Apr 16 21:27:14 2015 +0200 - - Fix desktop file keywords Bosnian translation - - The keywords are a string list and need to be terminated with a - semicolon to pass validation. - -M po/bs.po - -commit 9d504a125d398ebce53be9b48af88957a4aff610 -Author: Philip Withnall -Date: Mon Apr 13 23:26:56 2015 +0100 - - Release version 3.16.0 - -M NEWS -M configure.ac - -commit eabdbd0c946ec4ce8cc872dbdd958025d4fd826f -Author: Fabio Tomat -Date: Sun Apr 12 07:34:04 2015 +0000 - - Added Friulian translation - -M po/LINGUAS -A po/fur.po - -commit 89ab0f25275356a241f6ac467195f35c28327466 -Author: Rūdolfs Mazurs -Date: Fri Apr 3 18:56:38 2015 +0300 - - Updated Latvian translation - -M po/lv.po - -commit 9660fabe660a057875d8ae4743705c685491d49b -Author: Enrico Nicoletto -Date: Mon Mar 23 19:20:23 2015 +0000 - - Updated Brazilian Portuguese translation - -M po/pt_BR.po - -commit ff23e4eb475c8b7e64284b153829094f6abb2f2e -Author: Muhammet Kara -Date: Sun Mar 22 15:55:11 2015 +0000 - - Updated Turkish translation - -M po/tr.po - -commit 5ec6c805fb6a3695dba110072f24747bce37c462 -Author: Fran Dieguez -Date: Wed Mar 18 00:03:57 2015 +0000 - - Updated Galician translation - -M po/gl.po - -commit e1076af0da56f3e3b702d9fafa6e89d6e88d5b10 -Author: Ask Hjorth Larsen -Date: Sun Mar 15 16:17:01 2015 +0100 - - Updated Danish translation - -M po/da.po - -commit c6681b8cad7f8568216abe41f2140aae08c64c60 -Author: Daniel Korostil -Date: Sat Mar 14 12:16:02 2015 +0200 - - Updated Ukrainian translation - -M po/uk.po - -commit 108eb1e2f8cacbf946ca59674b7245d474b7ec75 -Author: Samir Ribic -Date: Fri Mar 13 20:38:46 2015 +0000 - - Added Bosnian translation - -M po/LINGUAS -A po/bs.po - -commit 6eb5c1fff84fbb025f25f37974be02e3a6faade5 -Author: Jiri Grönroos -Date: Wed Mar 11 17:02:51 2015 +0200 - - Finnish translation update - -M po/fi.po - -commit d720417c8912b0fa25933a26d18c1aab25c40458 -Author: Milo Casagrande -Date: Tue Mar 10 10:32:46 2015 +0000 - - Updated Italian translation - -M po/it.po - -commit a22c792e2f03ac08ace41209102bca40ee6018fd -Author: Aurimas Černius -Date: Sun Mar 8 20:05:52 2015 +0200 - - Updated Lithuanian translation - -M po/lt.po - -commit c3462b62394af4ec1396bdf31a7c6f752e03120a -Author: Changwoo Ryu -Date: Sun Mar 8 04:51:21 2015 +0900 - - Updated Korean translation - -M po/ko.po - -commit 6860892f6a152d795389c7f98835ee4b89db2ce9 -Author: Arnaud Bonatti -Date: Tue Feb 24 16:39:16 2015 +0100 - - Use GResource for the UI and CSS files. - - https://bugzilla.gnome.org/show_bug.cgi?id=744981 - -M Makefile.am -M src/hitori.gresource.xml -M src/interface.c - -commit b8a8695b075a0dfc734aa2a649abe22007eb33ca -Author: Arnaud Bonatti -Date: Tue Feb 24 17:00:27 2015 +0100 - - Use 'requires' tag in UI files. - - https://bugzilla.gnome.org/show_bug.cgi?id=744981 - -M data/hitori-menus.ui -M data/hitori.ui - -commit 030f6ef687986abaab891f08c6b05886acfb74d7 -Author: Arnaud Bonatti -Date: Sun Feb 22 18:42:02 2015 +0100 - - 'New Game' and 'Change Size' in the same menu section. - - https://bugzilla.gnome.org/show_bug.cgi?id=744981 - -M data/hitori-menus.ui - -commit 72315c89f5ab9108836639531c2229905e943add -Author: Arnaud Bonatti -Date: Wed Feb 25 03:01:40 2015 +0100 - - Gtk+ >= 3.15, GResource for loading the app-menu. - - https://bugzilla.gnome.org/show_bug.cgi?id=744981 - -M Makefile.am -M configure.ac -A data/hitori-menus.ui -M data/hitori.ui -M po/POTFILES.in -A src/hitori.gresource.xml -M src/interface.c - -commit 30ba06d29fa8fdb0cb335b285059083353bc3fe1 -Author: Мирослав Николић -Date: Wed Mar 4 20:50:13 2015 +0100 - - Updated Serbian translation - -M po/sr.po -M po/sr@latin.po - -commit 35870b7e8d298f3f647c5d2a1541e84f5d2d6369 -Author: Philip Withnall -Date: Wed Mar 4 16:52:06 2015 +0000 - - Release version 3.14.3 - -M NEWS -M configure.ac - -commit 2da44546b33bc0d9430a7002af74aa023348a1a6 -Author: Piotr Drąg -Date: Mon Mar 2 19:37:45 2015 +0100 - - Updated Polish translation - -M po/pl.po - -commit 1ddd0fd28b45219d0fb5fbbd5213b4cdc6898f40 -Author: Alexandre Franke -Date: Tue Feb 24 00:49:32 2015 +0000 - - Updated French translation - -M po/fr.po - -commit 15d0a96e5843d2ae42eca49ad9738f5641cdad6e -Author: Efstathios Iosifidis -Date: Mon Feb 23 00:06:06 2015 +0000 - - Updated Greek translation - -M po/el.po - -commit 3bd6b96a29a029ec9c93cc0e91f9a8ab3ec6a6ff -Author: Dušan Kazik -Date: Sun Feb 22 15:54:41 2015 +0000 - - Updated Slovak translation - -M po/sk.po - -commit 4eb3eb25b9d1a033da4ad39c5a1b536f253bc2c0 -Author: Chao-Hsiung Liao -Date: Sat Feb 21 11:02:33 2015 +0000 - - Updated Chinese (Taiwan) translation - -M po/zh_TW.po - -commit d4cbd819d020e3727c7bdab3c74c93b2ca4995a8 -Author: Philip Withnall -Date: Fri Feb 20 16:26:34 2015 +0000 - - build: Add AC_CONFIG_MACRO_DIR to configure.ac - -M configure.ac - -commit 7af578acbbfa03d1c80fb806fe52e9d00ab751f3 -Author: Alexandre Franke -Date: Thu Feb 19 11:30:52 2015 +0000 - - Updated French translation - -M help/fr/fr.po - -commit 9f0fe3edc76c87a0bffba724d575a35475fb49aa -Author: Fran Dieguez -Date: Thu Feb 19 11:23:10 2015 +0100 - - Updated Galician translations - -M po/gl.po - -commit 4c6699dafe1a83327b9d7af59ffabb7a2f1563c5 -Author: Fran Dieguez -Date: Thu Feb 19 10:47:16 2015 +0100 - - Updated Galician translations - -M po/gl.po - -commit f1198a1056fe184a6a96caf09b16aa791db2b847 -Author: Anders Jonsson -Date: Wed Feb 18 15:58:17 2015 +0000 - - Updated Swedish translation - -M po/sv.po - -commit 1c0e313043a1cee8a6e9c91da5daafc95b816a82 -Author: Yosef Or Boczko -Date: Tue Feb 17 00:51:55 2015 +0200 - - Updated Hebrew translation - -M po/he.po - -commit c7162c5bb4c7bb57cbbbd1f17a6b814a8b7acec7 -Author: Matej Urbančič -Date: Sun Feb 15 21:26:49 2015 +0100 - - Updated Slovenian translation - -M po/sl.po - -commit 2ea32d619248a26bc8393d02a7e4d62bc69b115e -Author: Yuri Myasoedov -Date: Sat Feb 14 16:04:44 2015 +0300 - - Updated Russian translation - -M po/ru.po - -commit d25e77f8d83a26b4cc33cbc3912a7cde42f40fa4 -Author: Kjartan Maraas -Date: Tue Feb 10 17:55:09 2015 +0100 - - Updated Norwegian bokmål translation. - -M po/nb.po - -commit 253cacee3a1e0fc349a30ab5c6c9e01ac3ea681a -Author: Kristjan SCHMIDT -Date: Sun Feb 8 00:43:13 2015 +0100 - - Add Esperanto translation - -M po/LINGUAS -A po/eo.po - -commit 59e9f103fd866da47606a94b7b5f8e497f72ef75 -Author: Inaki Larranaga Murgoitio -Date: Thu Jan 8 15:21:18 2015 +0100 - - Added Basque language\nAdded 'eu' (Basque) to LINGUAS - -M po/LINGUAS -A po/eu.po - -commit e0c7cdee02c91bb8d6d0683cd72a55da059c449c -Author: Marek Černocký -Date: Tue Jan 6 23:37:01 2015 +0100 - - Updated Czech translation - -M po/cs.po - -commit 4501ff92aa9880e7994d11a6e5b356fd45e083ee -Author: Matej Urbančič -Date: Fri Dec 26 18:52:08 2014 +0100 - - Updated Slovenian translation - -M po/sl.po - -commit 7d13f6abb6f240d1432e6ca430d15f4a2d73a3f3 -Author: Daniel Mustieles -Date: Mon Dec 22 13:08:49 2014 +0100 - - Updated Spanish translation - -M po/es.po - -commit bb228a5dcb2e7815a6a7baa2fb2a40e539ee0583 -Author: Balázs Úr -Date: Sun Dec 21 23:41:22 2014 +0000 - - Updated Hungarian translation - -M po/hu.po - -commit 5f17095cf02fa8ae0f733563097fcfa7c81891d0 -Author: Philip Withnall -Date: Sun Dec 21 15:24:57 2014 +0000 - - i18n: Update British English translation - -M po/en_GB.po - -commit 309adadaecc40e196a37f2827d9c9ecd05f6ccc9 -Author: Philip Withnall -Date: Sun Dec 21 15:22:33 2014 +0000 - - data: Add Keywords to hitori.desktop.in - - As suggested on - https://alt.fedoraproject.org/pub/alt/screenshots/f22/matrix.html. - -M data/hitori.desktop.in - -commit 6b6f2a2b9a7a1641a8dd1dbc9ecdc2f03a243841 -Author: Philip Withnall -Date: Tue Dec 16 10:22:05 2014 +0000 - - Release version 3.14.2.1 - -M NEWS -M configure.ac - -commit 5ba041c030f416da29cfafd3a0796b8afb7ff896 -Author: Philip Withnall -Date: Tue Dec 16 10:19:39 2014 +0000 - - data: Tweak AppData string to no longer need new translations - - Commit b55388bea5a60bb7a36aa63151ff11ff5ffb3ea3 broke the string - freeze. Sorry. - - The element is needed to get hitori.appdata.xml to pass - validation with recent versions of appstream-glib, so some string is - needed here. - -M data/hitori.appdata.xml.in - -commit 6822707a2db593555b687e3f12f2b82ed699f0f7 -Author: Philip Withnall -Date: Tue Dec 16 09:28:01 2014 +0000 - - Release version 3.14.2 - -M NEWS -M configure.ac - -commit b55388bea5a60bb7a36aa63151ff11ff5ffb3ea3 -Author: Philip Withnall -Date: Tue Dec 16 09:26:00 2014 +0000 - - data: Add element to the AppData file - -M data/hitori.appdata.xml.in - -commit 871ff0ba62f8d0c13dc42c1dd53238aa6108c00b -Author: Gábor Kelemen -Date: Sun Dec 7 13:40:27 2014 +0000 - - Updated Hungarian translation - -M help/hu/hu.po - -commit 22d7d6c581f3dee8838c4a8271be0d19ec2c24ee -Author: Muhammet Kara -Date: Sun Nov 9 21:14:38 2014 +0000 - - Added Turkish translation - -M po/LINGUAS -A po/tr.po - -commit 810fda2a0b4788daa6e6e81c2d7809de7aa0a252 -Author: Philip Withnall -Date: Sun Oct 26 15:48:19 2014 +0000 - - Release version 3.14.1 - -M NEWS -M configure.ac - -commit 6a41072a9fc7d1ec4aa24c31e981d033f48d5ff7 -Author: Milo Casagrande -Date: Tue Oct 14 11:47:43 2014 +0000 - - Added Italian translation - -M po/LINGUAS -A po/it.po - -commit f4679cc8afed70ef49e13650f54fd30aa20b4556 -Author: Rūdolfs Mazurs -Date: Sun Oct 12 17:18:29 2014 +0300 - - Updated Latvian translation - -M po/lv.po - -commit a7023876dab7e84a4cb38f7646c6a3e21989eb58 -Author: Rūdolfs Mazurs -Date: Sun Oct 12 17:00:09 2014 +0300 - - Updated Latvian translation - -M po/lv.po - -commit 2d5641909247ee7375ebf9836b142c530d60ef2c -Author: Piotr Drąg -Date: Fri Oct 3 15:21:31 2014 +0200 - - Updated Polish translation - -M po/pl.po - -commit 285ad0126854170e443b88384de2eb3c4fbbd093 -Author: Piotr Drąg -Date: Mon Sep 29 16:33:08 2014 +0200 - - Updated Polish translation - -M po/pl.po - -commit c3a312f721aadda82712edd6b0b5418f761b591d -Author: Kjartan Maraas -Date: Sun Sep 28 10:58:31 2014 +0200 - - Updated Norwegian bokmål translation. - -M po/nb.po - -commit 12769382ce43c0fbba2f065f3e79a49947eb0e2e -Author: Pawan Chitrakar -Date: Tue Sep 23 17:56:40 2014 +0000 - - Added Nepali translation - -M po/LINGUAS -A po/ne.po - -commit 1600008fbf791508f6592873e681893189b8a828 -Author: Iris Gou -Date: Tue Sep 23 18:30:06 2014 +0800 - - update zh_CN translation - -M po/zh_CN.po - -commit 7dd25b8ab6a63c0fb8ef3bce89055603b147f1db -Author: Мирослав Николић -Date: Tue Sep 23 12:20:45 2014 +0200 - - Updated Serbian translation - -M po/sr.po -M po/sr@latin.po - -commit 956dd4e21b1f8308c120d508d0023d74244982e3 -Author: Balázs Úr -Date: Mon Sep 22 16:36:03 2014 +0000 - - Updated Hungarian translation - -M help/hu/hu.po - -commit 613440d02462c547703b48c7a7e76d131e8c3180 -Author: Philip Withnall -Date: Mon Sep 22 09:42:45 2014 +0100 - - Release version 3.14.0.1 - -M NEWS -M configure.ac - -commit d569f52de78195c0a46407cc0de6c914a7b4e487 -Author: Philip Withnall -Date: Mon Sep 22 08:22:32 2014 +0100 - - Release version 3.14.0 - -M NEWS -M configure.ac - -commit 7747079530799983ba7e1cad72e578b1a3ee37b6 -Author: Bernd Homuth -Date: Sun Sep 21 22:01:00 2014 +0000 - - Updated German translation - -M po/de.po - -commit a68234b4f0d991c3f72ec1f862eeee7f9a7dfaa7 -Author: Kenneth Nielsen -Date: Sun Sep 21 10:09:13 2014 +0200 - - Updated Danish translation - -M po/da.po - -commit 356d858fe064569e731a8b873b300d240abdafec -Author: Joe Hansen -Date: Sun Sep 21 09:47:00 2014 +0200 - - Updated Danish translation - -M po/da.po - -commit f36960a66c86e82555d6418fc19255bfde378ac4 -Author: Michael Catanzaro -Date: Sat Sep 20 14:19:24 2014 -0500 - - appdata: update screenshot - - Move it to a safer location and update its size. - -M data/hitori.appdata.xml.in - -commit 8b35c9b64ed570bee0e44d146b9fa19faefc309e -Author: Gábor Kelemen -Date: Sat Sep 20 00:18:09 2014 +0000 - - Updated Hungarian translation - -M po/hu.po - -commit f1e6be9d5395221630ceadc1aac8480f249bbdeb -Author: Philip Withnall -Date: Tue Sep 16 23:54:19 2014 +0100 - - Release version 3.13.92 - -M NEWS -M configure.ac - -commit d186edd00188bfbc2c2462064a649d603af85051 -Author: Philip Withnall -Date: Tue Sep 16 23:42:54 2014 +0100 - - data: Prevent the window being resized - - This is a temporary fix for the fact that (for some reason) the window - doesn’t maximise properly. A better fix can be implemented once the - problem’s been investigated (and probably once the GtkDrawingArea - has - been replaced with a proper GtkWidget for drawing the board, which - handles resizing correctly). - - https://bugzilla.gnome.org/show_bug.cgi?id=736499 - -M data/hitori.ui - -commit cfe6a00421cf4291f94a1351bd6e2e95a8ba743c -Author: Michael Catanzaro -Date: Sat Sep 13 20:40:45 2014 -0500 - - Don't translate timer label - - https://mail.gnome.org/archives/gnome-i18n/2014-September/msg00052.html - -M src/main.c - -commit 01f8f3cb2b5a5bbe5b59427cb0c950f6f0fbfe25 -Author: David King -Date: Fri Sep 12 16:44:51 2014 +0100 - - Use APPSTREAM_XML instead of APPDATA_XML - - https://bugzilla.gnome.org/show_bug.cgi?id=736571 - -M Makefile.am -M configure.ac - -commit 85a62259c32eaeb70ce6a80a16ee0256802e3ce5 -Author: Piotr Drąg -Date: Wed Sep 10 03:01:47 2014 +0200 - - Updated Polish translation - -M po/pl.po - -commit ad3b5ccb1af56a3cab1d9e89b18ceb21d1f2e523 -Author: Dušan Kazik -Date: Tue Sep 9 19:53:38 2014 +0000 - - Updated Slovak translation - -M po/sk.po - -commit 685e04864e9fbc05a8157314be0975524842087a -Author: Dušan Kazik -Date: Tue Sep 9 19:50:36 2014 +0000 - - Added Slovak translation - -M po/LINGUAS -A po/sk.po - -commit 5d25b455750c698d33d361b068aadabc348e5c3d -Author: Yuri Myasoedov -Date: Tue Sep 9 15:08:30 2014 +0400 - - Updated Russian translation - -M po/ru.po - -commit a3ed442ce744e89d901cc179001b06e95edb024d -Author: Ricardo Barbosa -Date: Mon Sep 8 02:14:12 2014 +0000 - - Updated Brazilian Portuguese translation - -M po/pt_BR.po - -commit 0aacae748f90ea7ea4d74bf369cf5697e85645e1 -Author: Ville-Pekka Vainio -Date: Sun Sep 7 13:44:03 2014 +0300 - - Finnish translation update by Jiri Grönroos - -M po/fi.po - -commit 5984d0b18316e242c11ded3c2ce30e14764fabd2 -Author: Piotr Drąg -Date: Sun Sep 7 04:38:17 2014 +0200 - - Updated Polish translation - -M po/pl.po - -commit 61a0ecf7722630a776ea88d027005c22b570a551 -Author: Piotr Drąg -Date: Sun Sep 7 04:36:57 2014 +0200 - - Updated Polish translation - -M po/pl.po - -commit 5d9de67bfb41dcaff7ceeab50d2645857d50b0c6 -Author: Changwoo Ryu -Date: Sat Sep 6 20:47:40 2014 +0900 - - Added Korean translation - -M po/LINGUAS -A po/ko.po - -commit a28bdd0903d227b4a60c13768dbcbec99c91fe5c -Author: Andika Triwidada -Date: Fri Sep 5 03:30:46 2014 +0000 - - Updated Indonesian translation - -M po/id.po - -commit a4dcef82bc66c1bc6c8371ca2b717b8519748e9b -Author: Carles Ferrando -Date: Fri Sep 5 00:23:25 2014 +0200 - - [l10n] Added Catalan (Valencian) translation - -M po/LINGUAS -A po/ca@valencia.po - -commit d72a804ce31faf96ae12bdfed82f7217b01cb4b6 -Author: Gil Forcada -Date: Fri Sep 5 00:23:19 2014 +0200 - - [l10n] Update Catalan translation - -M po/ca.po - -commit c0545a0b94beeb215a043858d442331b4b26f85f -Author: Maria Mavridou -Date: Sun Aug 31 10:48:33 2014 +0000 - - Updated Greek translation - -M help/el/el.po - -commit 048d1999d45d84d0c4adaa8433ab1ad2b14f9c51 -Author: Erwan GEORGET -Date: Fri Aug 29 10:01:35 2014 +0000 - - Updated French translation - -M po/fr.po - -commit ed82be0c7eced4ca521b408d6fe167f99cc27b1a -Author: Nilamdyuti Goswami -Date: Wed Aug 27 16:41:56 2014 +0000 - - Added Assamese translation - -M po/LINGUAS -A po/as.po - -commit 2f9e6542b187958728397f3ae536068f5a8abc0e -Author: Marek Černocký -Date: Mon Aug 25 23:02:40 2014 +0200 - - Updated Czech translation - -M help/cs/cs.po - -commit 09ee05dfe75764015ce43232d6a95b72260f6483 -Author: Fran Diéguez -Date: Mon Aug 25 22:35:52 2014 +0200 - - Updated Galician translations - -M po/gl.po - -commit 7bc1467a43e72dac63e1298a943d83fb2f805a07 -Author: Alexandre Franke -Date: Mon Aug 25 14:17:13 2014 +0000 - - Updated French translation - -M po/fr.po - -commit 017f36728f3638a1db83d8031bf51a3aea84464c -Author: Michael Catanzaro -Date: Sun Aug 24 10:18:50 2014 -0500 - - Center the board - - Kind of fixes bug #732788 - -M data/hitori.ui - -commit 362fa3e0408b80ba0bd0fee990f9998dcdac7a39 -Author: Kjartan Maraas -Date: Sat Aug 23 12:22:43 2014 +0200 - - Updated Norwegian bokmål translation. - -M po/nb.po - -commit 093e987a4160c91d1d4bed302af3b8b0d89d3470 -Author: Marek Černocký -Date: Fri Aug 22 08:17:38 2014 +0200 - - Updated Czech translation - -M po/cs.po - -commit fa562d209512c12d07e4ec72b981fa4cb19b23b1 -Author: Yosef Or Boczko -Date: Wed Aug 20 10:21:35 2014 +0300 - - Updated Hebrew translation - -M po/he.po - -commit 46d9876c7f285febee4341891fc6657f83e65465 -Author: Chao-Hsiung Liao -Date: Tue Aug 19 20:27:22 2014 +0800 - - Updated Traditional Chinese translation(Hong Kong and Taiwan) - -M po/LINGUAS -A po/zh_HK.po -A po/zh_TW.po - -commit d0b33ee9ae9fc62f5fe23ba5150df05823f04bd6 -Author: Parin Porecha -Date: Tue Aug 19 01:02:17 2014 +0200 - - Release version 3.13.90 - -M NEWS -M configure.ac - -commit 3135e877057610218d3bf52b4569d4b7f0a5b172 -Author: Daniel Mustieles -Date: Thu Aug 7 13:59:09 2014 +0200 - - Updated Spanish translation - -M help/es/es.po - -commit 3386c5426f6c73c264a623bec7a7a76ba4a6125d -Author: Michael Catanzaro -Date: Sat Jul 5 13:29:09 2014 -0500 - - help: follow guidelines for including license info - - The license is unchanged. - - https://bugzilla.gnome.org/show_bug.cgi?id=732524 - -M help/C/customization.page -M help/C/game.page -A help/C/legal.xml -D help/C/license.page -M help/C/playing.page -M help/C/strategy.page -M help/Makefile.am - -commit 162a91ec75463fe13bb917ad4551b2bec2300c8a -Author: Daniel Korostil -Date: Thu Jul 31 23:49:57 2014 +0300 - - Added uk translation - -M po/LINGUAS -A po/uk.po - -commit f06848b51d5e4e6d8d3bfb79e51e62cf11e0da3c -Author: Piotr Drąg -Date: Thu Jul 31 19:33:04 2014 +0200 - - doap: add - -M hitori.doap - -commit d27872ad9174636e0246c48903d865bb5d7d84a3 -Author: Olav Vitters -Date: Wed Jul 30 17:32:46 2014 +0200 - - doap category apps - -M hitori.doap - -commit e4c3bf940fc5c28de7700245b7f3dfd5da41e24c -Author: Aurimas Černius -Date: Sun Jul 27 01:14:04 2014 +0300 - - Added Lithuanian translation - -M po/LINGUAS -A po/lt.po - -commit 7db5cc98e1f92870fc566986a330cbcbb2cbd7da -Author: Kjartan Maraas -Date: Wed Jul 23 14:25:12 2014 +0200 - - Updated Norwegian bokmål translation. - -M po/nb.po - -commit f33155e269a4069c9c83b0572b4a52f566e1b0f4 -Author: Anders Jonsson -Date: Wed Jul 23 08:16:11 2014 +0000 - - Updated Swedish translation - -M po/sv.po - -commit 4331cf8753601030673e4ddcec7ad08acfb8ec6b -Author: Michael Catanzaro -Date: Sun Jul 20 22:27:42 2014 -0500 - - Release version 3.13.4 - -M NEWS -M configure.ac - -commit 77f12b8c86522056d4100bc73c33a4f093eaadf1 -Author: MarMav -Date: Wed Jul 9 23:41:56 2014 +0000 - - Updated Greek translation - -M po/el.po - -commit 09e01e3cdbf4886ab449c0e2096cda91434af5c6 -Author: Philip Withnall -Date: Wed Jul 9 08:22:20 2014 +0100 - - Update British English translation - -M po/en_GB.po - -commit 5dd5554021b45e5c2b3fc16fbf28040ce051d66d -Author: Philip Withnall -Date: Tue Jul 8 23:17:07 2014 +0100 - - Disable the game play timer after winning - - In certain situations, the game play timer could become re-enabled - after - winning a game (but before starting the next one). Only un-pause it if - event processing is enabled (i.e. a game is underway). - -M src/interface.c - -commit 7c2e2b0ac834b0fb96c7bb087f92673ab9709315 -Author: Daniel Mustieles -Date: Tue Jul 8 12:36:34 2014 +0200 - - Updated Spanish translation - -M po/es.po - -commit a231b1589e45c646ed59da86bf879907c1a2218a -Author: Piotr Drąg -Date: Mon Jul 7 20:28:28 2014 +0200 - - Updated POTFILES.in - -M po/POTFILES.in - -commit e82fe40dcd1755d1196de5a0c83d2f133706891e -Author: Michael Catanzaro -Date: Sat Jul 5 18:54:52 2014 -0500 - - Store board size in gsettings - - Remember the user's preferred board size - - * Bump GLib dependency to 2.32, for g_settings_get_action() - * Bump intltool dependency to 0.50.2, for automatic gsettings support - - https://bugzilla.gnome.org/show_bug.cgi?id=732504 - -M Makefile.am -M configure.ac -A data/org.gnome.hitori.gschema.xml -M src/interface.c -M src/main.c -M src/main.h - -commit fa52ee7c71a82b37763c7899b8774555c3d9fbd0 -Author: Yosef Or Boczko -Date: Mon Jul 7 13:42:37 2014 +0300 - - Updated Hebrew translation - -M po/he.po - -commit 9effdc2a21eadd9da61a0b6a31df5e9a5b2ce01d -Author: Michael Catanzaro -Date: Sat Jul 5 13:18:07 2014 -0500 - - Use CSS provider to control colors used in UI - - This style looks the same as Hitori using Adwaita prior to GTK+ 3.13.3 - - https://bugzilla.gnome.org/show_bug.cgi?id=732300 - -M Makefile.am -A data/hitori.css -M src/interface.c - -commit 458d64a481a36c7ff50b62a7c6f1848a82d2cefa -Author: Michael Catanzaro -Date: Sat Jul 5 15:50:29 2014 -0500 - - About dialog: update description - - * Be clear that Nikoli is not involved with GNOME Hitori - * Not a sentence, no period - -M src/interface.c - -commit 4dd8aebf7d3f91f266e4d58785926c28639ce585 -Author: Michael Catanzaro -Date: Sat Jul 5 15:27:10 2014 -0500 - - About dialog: use GtkLicense - -M src/interface.c - -commit 31a8d43d03345663dce363ef9d9ef8607dd1832d -Author: Michael Catanzaro -Date: Sat Jul 5 15:19:52 2014 -0500 - - Use correct apostrophe character - -M src/rules.c - -commit 2e6c46c915f9f3c6404b41b04fe7f10dd9534a4b -Author: Michael Catanzaro -Date: Sat Jul 5 11:12:55 2014 -0500 - - doap: add myself - -M hitori.doap - -commit 6e3a8fe26cc579922517fafe88c16fa42a03b84f -Author: Fran Diéguez -Date: Tue Jul 1 22:22:30 2014 +0200 - - Updated Galician translations - -M po/gl.po - -commit 7802b05667f170bf12263645f22c1055ba37f743 -Author: Yuri Myasoedov -Date: Sat Jun 28 22:40:26 2014 +0400 - - Updated Russian translation - -M po/ru.po - -commit 0cd5ca314d266f463d35fda62eee027ff8866949 -Author: Philip Withnall -Date: Tue Jun 24 12:32:53 2014 +0100 - - Update British English translation - -M po/en_GB.po - -commit 4f01704f36275bd6c54a041cced955140c752011 -Author: Marek Černocký -Date: Tue Jun 24 08:09:49 2014 +0200 - - Updated Czech translation - -M po/cs.po - -commit c23e112e0f387fec206561b2d24791434643fc59 -Author: Michael Catanzaro -Date: Mon Jun 23 13:31:42 2014 -0500 - - git.mk: ignore .deps and all .o files - - Fixes - - Untracked files: - src/.deps/ - src/src_hitori-generator.o - src/src_hitori-interface.o - src/src_hitori-main.o - src/src_hitori-rules.o - - Proposed for upstream at https://github.com/behdad/git.mk/issues/15 - - https://bugzilla.gnome.org/show_bug.cgi?id=731309 - -M git.mk - -commit 9fbf9db1abde66f1513d740d9229765114e50211 -Author: Philip Withnall -Date: Sun Jun 22 15:12:19 2014 +0100 - - core: Add preconditions to generator function - - This helps static analysis. - -M src/generator.c - -commit 23c6a8b77a394b7515d488688cf3d99bef690ac5 -Author: Daniel Mustieles -Date: Fri Jun 20 13:23:24 2014 +0200 - - Updated Spanish translation - -M po/es.po - -commit af15a8b98234b1785e6fa806fdc8048ed96dce39 -Author: Rafael Ferreira -Date: Thu Jun 19 18:43:43 2014 +0000 - - Updated Brazilian Portuguese translation - -M po/pt_BR.po - -commit 0342accbcb6f9cb7327cc054741a122135546dc5 -Author: Piotr Drąg -Date: Thu Jun 19 16:45:35 2014 +0200 - - Updated Polish translation - -M po/pl.po - -commit daf4243cbe8eafedfe58f422491077a8b9dea4b8 -Author: Michael Catanzaro -Date: Thu Jun 5 22:46:05 2014 -0500 - - Remove status bar - - Center the timer beneath the grid, and use a clock icon instead of a - text label. - - I tried placing the timer in the header bar instead, but that did not - look as good as expected. - - https://bugzilla.gnome.org/show_bug.cgi?id=731312 - -M data/hitori.ui -M src/main.c - -commit c53a9003bb6da92138ebc07ff303c9556dbb1aa2 -Author: Piotr Drąg -Date: Wed Jun 18 15:53:38 2014 +0200 - - Updated Polish translation - -M po/pl.po - -commit 712173ffa105fca2008c91ddb3fb3bcb9e9fddcf -Author: Tom Tryfonidis -Date: Wed Jun 18 10:44:20 2014 +0000 - - Updated Greek translation - -M po/el.po - -commit 1e6a53cf5e63769f25f4fdcd2c0ddec135b6c3dd -Author: Yosef Or Boczko -Date: Wed Jun 18 04:21:00 2014 +0300 - - Updated Hebrew translation - -M po/he.po - -commit 8db1071012b772b1547dd10d63203d37f8f8f9bb -Author: Rafael Ferreira -Date: Wed Jun 18 01:19:38 2014 +0000 - - Updated Brazilian Portuguese translation - -M po/pt_BR.po - -commit d9d3b6ccbe036625126c59422abf86f156ada054 -Author: Michael Catanzaro -Date: Thu Jun 5 23:01:01 2014 -0500 - - Replace GtkVBox with GtkBox - - GtkVBox has been deprecated - - https://bugzilla.gnome.org/show_bug.cgi?id=731312 - -M data/hitori.ui - -commit 927c13abcb060b93055d61e186d78b39bfe38927 -Author: Michael Catanzaro -Date: Thu Jun 5 18:50:14 2014 -0500 - - Replace the menu bar with a header bar - - Depends on GTK+ 3.13.2 for RTL icon theme support. - - https://bugzilla.gnome.org/show_bug.cgi?id=731312 - -M configure.ac -M data/hitori.ui -M src/interface.c - -commit 236fc7a90900f310f84af97b24ff2b4f515558ee -Author: Michael Catanzaro -Date: Wed Jun 4 23:05:05 2014 -0500 - - Move the board size preference to the app menu - - We're going to treat this as an application-level preference. - - https://bugzilla.gnome.org/show_bug.cgi?id=731312 - -M data/hitori.ui -M src/interface.c - -commit 99d9f9a2228bbec6d58ae9769b5913250c7f5619 -Author: Michael Catanzaro -Date: Wed Jun 4 20:39:43 2014 -0500 - - app menu: standardize help/about/quit - - As of 3.12, we are using this style fairly consistently. - - https://bugzilla.gnome.org/show_bug.cgi?id=731312 - -M data/hitori.ui - -commit d7f8316e5c56397ef01dd381659dbb90518c1a92 -Author: Piotr Drąg -Date: Tue Jun 17 19:39:03 2014 +0200 - - Updated Polish translation - -M po/pl.po - -commit 0c8025cdd7085ca7fbdb6e5870074e5be461ae20 -Author: Daniel Mustieles -Date: Tue Jun 17 19:22:20 2014 +0200 - - Updated Spanish translation - -M po/es.po - -commit d2bf0676714bb1299766605d0a5efad3e365cd43 -Author: Michael Catanzaro -Date: Thu Jun 5 23:49:41 2014 -0500 - - On game over, prompt the user to play again - - This allows us to simplify the UI by obviating the need to move - the new - game action from the app menu into the window. It's also simply more - useful than an OK button. - - The user can instead choose to quit the app from this dialog. What a - timesaver! - - https://bugzilla.gnome.org/show_bug.cgi?id=731314 - -M src/rules.c - -commit 8de8b2b6b5cd77683894b5d07cbcb93dcd6b5574 -Author: Michael Catanzaro -Date: Fri Jun 6 11:01:30 2014 -0500 - - Use descriptive labels on board size change dialog - - https://bugzilla.gnome.org/show_bug.cgi?id=731337 - -M src/main.c - -commit 19bec75fc9013542266ab18b8be9687e2106075c -Author: Michael Catanzaro -Date: Thu Jun 5 17:27:32 2014 -0500 - - appdata: add to GNOME project group - - Some software centers, like newer versions of GNOME Software, will use - this to associate Hitori with other GNOME apps. - - https://bugzilla.gnome.org/show_bug.cgi?id=731308 - -M data/hitori.appdata.xml.in - -commit 8c792f0364923695fa4fc9fd17bca7401a733541 -Author: Michael Catanzaro -Date: Thu Jun 5 17:26:02 2014 -0500 - - appdata: do not use generic name "Hitori" - - In a software center like GNOME Software, we should display the more - specific name "GNOME Hitori" rather than the generic "Hitori" that we - show once we're installed. - - https://bugzilla.gnome.org/show_bug.cgi?id=731308 - -M data/hitori.appdata.xml.in - -commit e13c862141299db1bbebffa958c56518da5d64c9 -Author: Philip Withnall -Date: Wed Jun 11 10:03:58 2014 +0100 - - interface: Fix a leak in the redo stack handling - -M src/interface.c - -commit 70d019a9c79336f9dbfce08445f458ad3bb88f2c -Author: Philip Withnall -Date: Wed Jun 11 10:02:49 2014 +0100 - - interface: Fix leak of top-level menu models - -M src/interface.c - -commit b2590082de11ab72607693d7281f544e270c3dbe -Author: Philip Withnall -Date: Wed Jun 11 09:47:21 2014 +0100 - - interface: Disable redo when making a move - - Making a move will clear the redo stack, so the redo button is useless - at that point. - -M src/interface.c - -commit c4cbc9eecac1694189b13e657819d16f95244e3c -Author: Philip Withnall -Date: Tue May 6 11:53:04 2014 +0100 - - core: Fix a potential NULL pointer dereference - -M src/main.c - -commit b93cfd3a0132a7596426b7af31e7b14ecc049644 -Author: Philip Withnall -Date: Tue May 6 11:52:33 2014 +0100 - - core: Remove a redundant assignment - -M src/interface.c - -commit 67d68b6613b6fd9c8461a2fdfa19dbec339dd0e3 -Author: Jordi Mas -Date: Wed May 28 13:33:10 2014 +0200 - - Fix to Catalan translation - -M po/ca.po - -commit ea0cb02b08c7f514e4a7b1108a3d52bdf5a181b9 -Author: Jordi Mas -Date: Wed May 28 13:04:13 2014 +0200 - - Catalan translation - -M po/LINGUAS -A po/ca.po - -commit 199f45a8582e38e54620fec74fe055a58f264524 -Author: Philip Withnall -Date: Sun May 4 15:51:02 2014 +0100 - - Release version 0.4.3 - -M NEWS -M configure.ac - -commit a8b7486116aa14ab2f97c1f7e9384044646c8425 -Author: Philip Withnall -Date: Sun May 4 11:55:33 2014 +0200 - - data: Update licencing information in AppData file - - See: - http://blogs.gnome.org/hughsie/2014/05/02/appdata-meet-spdx-spdx-meet-appdata/. - -M data/hitori.appdata.xml.in - -commit 875e49f87173b7c7bb88add1da645ea4f13783a3 -Author: Tom Tryfonidis -Date: Thu Apr 24 16:53:00 2014 +0000 - - Updated Greek translation - -M po/el.po - -commit 9c0afb9ac046ecd061dbb99d05d44c14a877f323 -Author: Andika Triwidada -Date: Sun Mar 30 12:38:16 2014 +0000 - - Updated Indonesian translation - -M po/id.po - -commit 7ed25113a4f209cde4bb0154bd7a28c510904574 -Author: Dimitris Spingos -Date: Sun Mar 16 22:11:26 2014 +0200 - - Added Greek translation of help - -M help/Makefile.am -A help/el/el.po - -commit 8e42bb2c89848217d47c06bb5fc6458acdaf68f6 -Author: Мирослав Николић -Date: Tue Jan 28 18:40:52 2014 +0100 - - Updated Serbian translation - -M po/sr.po -M po/sr@latin.po - -commit c180a5044abebe95f889ef8776b140b7e0de0398 -Author: Fran Diéguez -Date: Fri Jan 3 02:36:11 2014 +0100 - - Updated Galician translations - -M po/gl.po - -commit 8aa1691552ebe91ea1216638636323222b0ca49f -Author: Rafael Ferreira -Date: Wed Jan 1 17:42:35 2014 -0200 - - Updated Brazilian Portuguese Translation proofread by Enrico Nicoletto - -M po/pt_BR.po - -commit 8ac790d2929e5da54d813292c85df1faa00093bc -Author: Daniel Mustieles -Date: Mon Dec 30 11:58:35 2013 +0100 - - Updated Spanish translation - -M po/es.po - -commit 9d3d651a5c7d0cc1e7bcb44c5b8b7a5084c1738b -Author: Marek Černocký -Date: Tue Dec 24 17:03:53 2013 +0100 - - Updated Czech translation - -M po/cs.po - -commit 6f0bb76c550e12dc5f8f555db3135a38f474038c -Author: Piotr Drąg -Date: Sun Dec 22 20:40:51 2013 +0100 - - Updated Polish translation - -M po/pl.po - -commit 3796750134e93a5f957316c6501c7cc590db5bc1 -Author: Matej Urbančič -Date: Sun Dec 22 19:24:44 2013 +0100 - - Updated Slovenian translation - -M po/sl.po - -commit 378f6046d3fc3503f7ca9fed607461ad50f1cda1 -Author: Philip Withnall -Date: Fri Dec 20 23:12:25 2013 +0000 - - build: Add AppData support to git.mk - - This is in the process of being upstreamed: - https://github.com/behdad/git.mk/pull/14. - -M git.mk - -commit 2d4342bf4d305d702779435132a3bf39bbe90bc7 -Author: Philip Withnall -Date: Fri Dec 20 23:09:21 2013 +0000 - - build: Update git.mk from upstream - -M Makefile.am -M git.mk - -commit 848d7843742f1e71f630c6a566bbfa2a2e0f6ea6 -Author: Philip Withnall -Date: Fri Dec 20 23:00:35 2013 +0000 - - data: Slightly expand AppData description - - This allows it to pass validation. - -M data/hitori.appdata.xml.in - -commit 474af988b330cd9b19eaaa6c6ccfbbfc6f73d88c -Author: Philip Withnall -Date: Fri Dec 20 22:52:44 2013 +0000 - - build: Update AppData build rules to enable validation - - The AppData file’s validity will now be checked during `make check`. - -M Makefile.am -M configure.ac - -commit 4258f87033e8582c3a7dc287248b8c7eb340bedf -Author: Philip Withnall -Date: Fri Nov 8 11:51:55 2013 +0000 - - Release version 0.4.2 - -M NEWS -M configure.ac - -commit 778cfa6a793cb382a6d20f4c20a338184d35cef6 -Author: Philip Withnall -Date: Fri Nov 8 11:49:20 2013 +0000 - - build: Update DOAP file with download and bug pages - -M hitori.doap - -commit b95c1d17ce7f387689f5370901ef9ab670a39387 -Author: Philip Withnall -Date: Fri Nov 8 11:49:10 2013 +0000 - - build: Switch to .tar.xz distribution - -M configure.ac - -commit 131fef80e4decff273ad058667f29a16458ffdcc -Author: Jiri Grönroos -Date: Tue Nov 5 07:13:27 2013 +0200 - - Finnish translation update - -M po/LINGUAS -A po/fi.po - -commit f508ebb8cf5e4a06423706293522961b2fe571c9 -Author: Мирослав Николић -Date: Tue Oct 15 22:56:55 2013 +0200 - - Updated Serbian translation - -M po/sr.po -M po/sr@latin.po - -commit 99be53e340d94e1479114d8bfe5072e628379226 -Author: Rūdolfs Mazurs -Date: Sat Oct 5 14:29:21 2013 +0300 - - Updated Latvian translation - -M po/lv.po - -commit cbaea95d4e68560a429617a1ab38e6ccd6e10fc9 -Author: Enrico Nicoletto -Date: Thu Sep 12 22:45:55 2013 -0300 - - Updated Brazilian Portuguese translation - -M po/pt_BR.po - -commit 47d820031bad5a9bdd159f77f85c02d8ee976fd2 -Author: Fran Diéguez -Date: Thu Sep 12 19:30:40 2013 +0200 - - Updated Galician translations - -M po/gl.po - -commit f54525f10aa30366cbe80239ed4ce1bc42ba9d5b -Author: Piotr Drąg -Date: Thu Sep 12 00:27:22 2013 +0200 - - Updated Polish translation - -M po/pl.po - -commit 1590c159cf18eb2279f824f8622e8215626b291a -Author: Matej Urbančič -Date: Wed Sep 11 22:05:20 2013 +0200 - - Updated Slovenian translation - -M po/sl.po - -commit 006f043fc419233cf22dd1bb95145ae221835613 -Author: Daniel Mustieles -Date: Wed Sep 11 17:54:47 2013 +0200 - - Updated Spanish translation - -M po/es.po - -commit ddd5d19b52b2a524eaa50a555cd4133f6a37a9b8 -Author: Marek Černocký -Date: Wed Sep 11 11:21:47 2013 +0200 - - Updated Czech translation - -M po/cs.po - -commit b9936356f3b30dc9aa76eb58ce184b7eb2ff0697 -Author: Philip Withnall -Date: Tue Sep 10 21:10:51 2013 -0600 - - i18n: Update British English translation - -M po/en_GB.po - -commit 4a94f84c76df85e20d99962b1a2b58ae1a984d26 -Author: Philip Withnall -Date: Tue Sep 10 21:05:22 2013 -0600 - - docs: Update application home page - - The old home page has disappeared following an unexpected wiki - reorganisation. - - Closes: https://bugzilla.gnome.org/show_bug.cgi?id=707692 - -M README -M configure.ac -M hitori.doap -M src/interface.c - -commit f3514bcb07ed9531f493b2935e7c1023b2080c9a -Author: Philip Withnall -Date: Tue Sep 10 21:04:20 2013 -0600 - - build: Add an AppData file for the application - - See: http://people.freedesktop.org/~hughsient/appdata/. - -M Makefile.am -A data/hitori.appdata.xml.in -M po/POTFILES.in - -commit 6cf8568206cc6d666f98834ba807b870739fb4a1 -Author: Philip Withnall -Date: Fri Aug 2 10:56:55 2013 +0200 - - Release version 0.4.1 - -M NEWS - -commit d5b2643cb38fa40774aa2dad8d8b8460a86e78ca -Author: Philip Withnall -Date: Fri Aug 2 10:54:17 2013 +0200 - - core: Don’t use deprecated GtkStyleContext API - -M src/interface.c - -commit e63fd1dbdf6153a52bcd6a6041a4b29372642657 -Author: Philip Withnall -Date: Fri Aug 2 10:54:00 2013 +0200 - - core: Only call g_type_init() if compiled against old GLib - -M src/main.c - -commit be2ba012e75546b09e9938b7386adbd721a9cab8 -Author: Philip Withnall -Date: Fri Aug 2 10:38:24 2013 +0200 - - core: Fix timer pausing when winning the game - - The ‘congratulations’ dialogue was changing the focus state of - the main window - which was causing the timer to get un-paused after winning. - -M src/interface.c -M src/main.c - -commit a2d9f9b878956f0053488361249f15d310286f19 -Author: Marek Černocký -Date: Sun Jul 21 22:37:36 2013 +0200 - - Updated Czech translation - -M help/cs/cs.po - -commit 757cce550dcc00f97bee0d1a5842a9b0420fcaae -Author: Balázs Úr -Date: Sun Mar 17 11:31:52 2013 +0100 - - Added hu entry - -M help/Makefile.am - -commit f4eedfb163e7ab0e1eb1f228fa594554568f647d -Author: Balázs Úr -Date: Sun Mar 17 11:31:25 2013 +0100 - - Updated Hungarian translation - -A help/hu/hu.po - -commit 756940a384d967cde9a2ca3a0ff0cafbe9b56d22 -Author: Balázs Úr -Date: Sun Mar 17 11:17:11 2013 +0100 - - Updated Hungarian translation - -M po/hu.po - -commit 9de80fb26fc7ce525c4ae9ba9f8d32a0ed38a1c7 -Author: Enrico Nicoletto -Date: Sun Feb 10 00:00:45 2013 -0200 - - Updated Brazilian Portuguese translation - -M po/pt_BR.po - -commit 9bb6a169bfa58bfee82b20585fcdbcddbfa74f23 -Author: Yaron Shahrabani -Date: Fri Dec 28 14:52:52 2012 +0200 - - Added Hebrew. - -M po/LINGUAS - -commit 7d4e89ec1074a80d8cd9a0a1aadd6f05bb891ea6 -Author: Yaron Shahrabani -Date: Fri Dec 28 14:52:09 2012 +0200 - - Updated Hebrew translation. - -A po/he.po - -commit 8dd0f4418d8ee3e25a3e56bf2d28cb1b0d1b1bac -Author: Marek Černocký -Date: Thu Dec 27 21:02:25 2012 +0100 - - Updated Czech translation - -M help/cs/cs.po - -commit 395c658aa3acb07dc3c7f6ec5274b76cbf8b01e7 -Author: Aleksej Kabanov -Date: Tue Dec 25 23:30:25 2012 +0400 - - Updated Russian translation - -M po/ru.po - -commit 760acf1f00403627fe1ba8b439e98053c1c87ecf -Author: Mario Blättermann -Date: Thu Nov 1 22:26:33 2012 +0100 - - Updated German doc translation - -M help/de/de.po - -commit 38207e994e585dab86908f3a7f774608e5c8ac14 -Author: Mario Blättermann -Date: Thu Nov 1 22:21:07 2012 +0100 - - Updated German translation - -M po/de.po - -commit 33d359782d4160c1229423d8abe0cdace03438e3 -Author: Rūdolfs Mazurs -Date: Sun Oct 14 01:49:54 2012 +0300 - - Updated Latvian translation - -M po/lv.po - -commit a1bff80ba359e58578fee939ff0dc52ba2338e1c -Author: Fran Diéguez -Date: Fri Oct 12 01:23:32 2012 +0200 - - Updated Galician translations - -M po/gl.po - -commit 09d0b31965d3ff4d782b213c908ac67c017cbacc -Author: Marek Černocký -Date: Sun Oct 7 22:44:36 2012 +0200 - - Updated Czech translation - -M po/cs.po - -commit faee7c711643d5db26819926a90697f075d3a27c -Author: Andika Triwidada -Date: Thu Oct 4 10:53:04 2012 +0700 - - Updated Indonesian translation - -M po/id.po - -commit b84f69f67c2b250fbe351e2abe2dae925499f5c4 -Author: Daniel Mustieles -Date: Sun Sep 30 13:09:43 2012 +0200 - - Updated Spanish translation - -M help/es/es.po - -commit c8159787cedcb515a9f425ac47a46188083afb9a -Author: Daniel Mustieles -Date: Sun Sep 30 13:08:03 2012 +0200 - - Updated Spanish translation - -M po/es.po - -commit f655f310b4fdc4ff26021e0b7ebc7b45a42df085 -Author: Philip Withnall -Date: Sun Sep 30 08:56:25 2012 +0100 - - Post-release version bump to 0.4.1 - -M configure.ac - -commit 0ed6a39a8a7675c876fb03ae9a67291aa164c40c -Author: Philip Withnall -Date: Sun Sep 30 08:54:55 2012 +0100 - - Release version 0.4.0 - -M NEWS - -commit 8590b07563cd927972899eb5a2e579ff87122c61 -Author: Matej Urbančič -Date: Sat Sep 29 15:54:54 2012 +0200 - - Updated Slovenian translation - -M po/sl.po - -commit 698df44d0ad0c1a680c91af16d3db4d9a641cbd9 -Author: Мирослав Николић -Date: Sat Sep 29 10:40:09 2012 +0200 - - Updated Serbian translation - -M po/sr.po -M po/sr@latin.po - -commit fa6f580f7248b9af006829e0b77f5774de2da29d -Author: Piotr Drąg -Date: Sat Sep 29 05:17:56 2012 +0200 - - Updated Polish translation - -M po/pl.po - -commit f94fb76b1190e856e6cfed77496b5f529e1a1a7e -Author: Philip Withnall -Date: Sat Sep 29 02:44:14 2012 +0100 - - i18n: Update British English translation - -M po/en_GB.po - -commit e40104c541facd63a5cb21c1e4572ad0ef1aa209 -Author: Philip Withnall -Date: Sat Sep 29 02:39:46 2012 +0100 - - Bug 676602 — Port to GMenu - - Split the menu up into an application and a window menu, and port - them both - to GMenu/GAction. - - The new menu layout is: - • Application: - - New Game - - About Hitori - - Help - - Quit - • Window: - - Board Size (with submenu) - - Hint - - Undo - - Redo - - This was chosen because the actions in the window menu all perform - some - operation specifically on the contents of the main window. It’s - arguable - that ‘New Game’ should also be there, but that could be considered - to open - a new main window, sort of, so it’s in the application menu. - - Closes: https://bugzilla.gnome.org/show_bug.cgi?id=676602 - -M data/hitori.ui -M src/interface.c -M src/main.c -M src/main.h - -commit 8646cfd9ec9126b44a37b4082c585f2ad9999240 -Author: Piotr Drąg -Date: Sat Sep 29 02:31:11 2012 +0200 - - Updated Polish translation - -M po/pl.po - -commit e4430291bdf5c26fb7257589d29c461dfc1293a7 -Author: Philip Withnall -Date: Sat Sep 29 00:40:46 2012 +0100 - - Bug 676601 — Port to GtkApplication - - Port Hitori to use GtkApplication. This is a fairly quick-and-simple - port, - just wrapping the existing code in a GtkApplication without properly - integrating it all. For example, none of the semi-public members - of struct - Hitori have been moved into the new HitoriApplicationPrivate struct. - - That can all be tidied up later. - - Closes: https://bugzilla.gnome.org/show_bug.cgi?id=676601 - -M src/main.c -M src/main.h - -commit cdfa7362d29097476cfc6170bc5d2c4fdfc9e9a8 -Author: Philip Withnall -Date: Sat Sep 29 00:03:07 2012 +0100 - - build: Update git.mk from upstream - - Get the latest version (af2144914afa48193ff879bbec7270683f501742) from - upstream (https://github.com/behdad/git.mk). - -M git.mk - -commit 34a3d01945f6b3ab27bc571b53079ac9a45fa666 -Author: Oliver Propst -Date: Sat Sep 8 15:48:12 2012 +0200 - - build: Use yelp-tools instead of gnome-doc-utils - - Closes: https://bugzilla.gnome.org/show_bug.cgi?id=683623 - -M Makefile.am -M configure.ac -M help/Makefile.am -M help/da/da.po -M help/en_GB/en_GB.po -M help/es/es.po -D help/hitori.omf.in -M help/sv/sv.po -M help/zh_CN/zh_CN.po -M src/interface.c - -commit 6f3ac7ebe5fba6e10bb0f8b8cc9a96590fbdb062 -Author: Andika Triwidada -Date: Sun Sep 9 01:56:52 2012 +0700 - - Updated Indonesian translation - -M po/id.po - -commit 01209da0a8836223d5a563d896afeb2b2f85d9be -Author: Daniel Șerbănescu -Date: Sun Aug 5 23:03:44 2012 +0200 - - Updated Romanian Translation - -M help/Makefile.am -A help/ro/ro.po - -commit ef6d7282a19efdfae3b77d6b5174ecb087c0f6dd -Author: Tom Tryfonidis -Date: Fri Jun 29 14:34:34 2012 +0300 - - Updated Greek translation - -M po/el.po - -commit 9779bd3d3e4f2fe05a9cf0c4ddf0e455c8fa2e4c -Author: Philip Withnall -Date: Sat Mar 24 23:37:15 2012 +0000 - - core: Use two passes to draw the cells - - This ensures that the borders of the painted cells are always drawn - on top - of the borders of the unpainted cells. - -M src/interface.c - -commit d8c5352767964f120af352b4fe98bf63bc171647 -Author: Philip Withnall -Date: Sat Mar 24 23:29:03 2012 +0000 - - core: Remove implicit dependency on libm through use of floor() - function - -M configure.ac -M src/interface.c - -commit 9c168210dd14c6e1466e337abb4f1cc3caf6f65d -Author: Fran Diéguez -Date: Sat Mar 24 00:32:24 2012 +0100 - - Updated Galician translations - -M po/gl.po - -commit 1d64e50c024b9e9f1289e6cf5757006e5dab12ca -Author: Мирослав Николић -Date: Sat Mar 17 21:37:05 2012 +0100 - - Added Serbian translation - -M po/LINGUAS -A po/sr.po -A po/sr@latin.po - -commit f558e6a0eaa908d168761c1e4cfac387caab9550 -Author: Piotr Drąg -Date: Sat Feb 18 19:11:00 2012 +0100 - - Update version number in README - - GNOME 2.24 is so 2008-ish. :) - -M README - -commit 2822e1f275ddffab29f054f1d24c5455453eaac7 -Author: Piotr Drąg -Date: Sat Feb 18 19:04:41 2012 +0100 - - Added Polish translation - -M po/LINGUAS -A po/pl.po - -commit ed8aacfcf4a5f9596d5aa282a6ff562789111dc3 -Author: Bruno Brouard -Date: Sun Feb 12 17:10:35 2012 +0100 - - Updated French doc translation - -A help/fr/figures/hitori_main_window.png -M help/fr/fr.po - -commit 723b5f934009b46060906a73303d6b3c50402dc7 -Author: Daniel Șerbănescu -Date: Sat Feb 11 22:04:54 2012 +0100 - - Romanian translation added - -M po/LINGUAS -A po/ro.po - -commit 73aed8881e29c3d78c76ba764f30707e94a09b24 -Author: Philip Withnall -Date: Sat Jun 11 16:42:14 2011 +0100 - - Post-release version bump to 0.4.0 - -M configure.ac - -commit f459d03226868120015a51bac285c004d29058a8 -Author: Philip Withnall -Date: Tue Sep 13 23:15:49 2011 +0100 - - build: Fix AM_MAINTAINER_MODE in configure.ac - - See: - http://blogs.gnome.org/desrt/2011/09/08/am_maintainer_mode-is-not-cool/ - -M configure.ac - -commit 95d8f35a08476799e2ff7d078b1007dc13a01e3d -Author: Mario Blättermann -Date: Sun Jun 19 12:18:37 2011 +0200 - - [l10n] Tweaked German translation a bit - -M po/de.po - -commit ce0a0a25d77c7fa0d5f0a8fed87036dada128f89 -Author: Peter De Wachter -Date: Sat Jun 18 19:22:47 2011 +0100 - - Bug 652684 — Display glitch when marking hints - - Fix the drawing of hints to not rely on the clipping area for - redrawing a - particular cell, as the clipping area may be bigger than we expect - if, for - example, the hint is drawn just after the play area is resized. - - Closes: bgo#652684 - -M src/interface.c - -commit 0bcb8873a2e885247d9ec959a830d0ac3d7ded52 -Author: Philip Withnall -Date: Sun Jun 12 19:52:40 2011 +0100 - - Bug 652399 — l10n doesn't work - - Commit 997cf9973f4fc81ce6df531e03c044016e4d7842 means that - ENABLE_NLS is - now *never* defined, which effectively removed runtime gettext - support from - Hitori. - - Closes: bgo#652399 - -M src/main.c - -commit 0b67d00bec32bb6d2a79db38590aeb667f52fa1e -Author: Philip Withnall -Date: Sat Jun 11 16:41:08 2011 +0100 - - Release version 0.3.0 - -M NEWS - -commit b07150e138af9275ff0e4237ea6c3e4a62fb3862 -Author: Philip Withnall -Date: Sat Jun 11 16:39:01 2011 +0100 - - Remove non-existent files from EXTRA_DIST - -M Makefile.am - -commit f71e6b54d38f0a36b5c420d9c9a666afa9442a7d -Author: Philip Withnall -Date: Sat Jun 11 16:36:06 2011 +0100 - - Fix redrawing of hint rectangles - -M src/interface.c - -commit 612373480eed2fc1756e7b2d7e7c5173b8b1fea2 -Author: Philip Withnall -Date: Sat Jun 11 16:03:16 2011 +0100 - - Remove an extraneous debug print statement - -M src/interface.c - -commit b295ded4d84e14d2e3cb298942238bf59737cca7 -Author: Yuri Myasoedov -Date: Sun Jun 5 00:37:07 2011 +0400 - - Added Russian translation - -M po/LINGUAS -A po/ru.po - -commit ef8333afab2caf7f7b5edc7ce1fbe884e10e3a20 -Author: Lê Trường An -Date: Thu May 5 20:53:41 2011 +0700 - - Added Vietnamese translation - -M po/LINGUAS -A po/vi.po - -commit f4ff96c893b73c7a823c5a85ce6c0c7550234755 -Author: Rudolfs Mazurs -Date: Mon Apr 25 21:17:56 2011 +0300 - - Added Latvian translation. - -M po/LINGUAS -A po/lv.po - -commit 06197a73951757ce4a6e09b9c3eddc8d95209ec3 -Author: Mario Blättermann -Date: Sun Apr 10 12:36:24 2011 +0200 - - [l10n] Updated German doc translation, added new screenshot - -M help/de/de.po -M help/de/figures/hitori_main_window.png - -commit 900a34a7af376bdd96e7ee639b782169c2e67f1b -Author: Marek Černocký -Date: Mon Feb 7 19:10:46 2011 +0100 - - Updated Czech screenshot - -M help/cs/figures/hitori_main_window.png - -commit b487320f50f05d814a9f1f0420864a20795522a4 -Author: Marek Černocký -Date: Mon Feb 7 19:10:24 2011 +0100 - - Updated Czech translation - -M help/cs/cs.po - -commit 094a7106f4a592ce60fadb9e4214c1f1d5497f53 -Author: Philip Withnall -Date: Sun Jan 30 13:52:32 2011 +0000 - - Bug 640905 — Please update COPYING-DOCS - - Update COPYING-DOCS to refer to the CC license now used for the - documentation, - rather than the GFDL as was previously used. Closes: bgo#640905 - -M COPYING-DOCS - -commit 1420dc17458f45ad44cca27e12e048091e3a7ea1 -Author: Joe Hansen -Date: Sun Jan 16 15:01:58 2011 +0100 - - Updated Danish translation - -M po/da.po - -commit 69d6afa1dc8c3617e14570f1ccbe1f620e423cfa -Author: Philip Withnall -Date: Thu Dec 30 22:50:22 2010 +0000 - - Remove deprecated use of GdkDrawable - -M src/interface.c - -commit b0d020f4cb9b1accf2b9330857829cbc692c86b7 -Author: Philip Withnall -Date: Thu Dec 30 22:45:59 2010 +0000 - - Port to GtkStyleContext - -M src/interface.c - -commit f239f7c038f1edfe6a2da3839b94dbe0320005b2 -Author: Philip Withnall -Date: Thu Dec 30 22:29:13 2010 +0000 - - Remove call to deprecated gtk_set_locale() - -M src/main.c - -commit ba81511d949583162fa0dd87450baadc93de14e8 -Author: Jorge González -Date: Wed Dec 29 23:13:30 2010 +0100 - - Updated Spanish translation - -M help/es/es.po - -commit a3804e7c31c2d26f66c7b4a950f85e6afc0468ec -Author: Daniel Nylander -Date: Wed Dec 29 12:50:23 2010 +0100 - - Updated Swedish translation - -M po/sv.po - -commit acbb0cee5d2c536add887b748338bc54553c3085 -Author: Bruno Brouard -Date: Thu Dec 16 17:53:08 2010 +0100 - - New french doc translation - - Contributed by Gérard Baylard , - Bruno Brouard - -M help/Makefile.am -A help/fr/fr.po - -commit 99c4e06e977e12bded118fd78a7beb2074a60682 -Author: Mario Blättermann -Date: Sun Dec 5 19:07:24 2010 +0100 - - [l10n] Updated German translation - -M po/de.po - -commit 177fc396fad9526192c998a9d837b459075e556f -Author: Joe Hansen -Date: Sat Dec 4 12:31:01 2010 +0100 - - Updated Danish translation - -M po/da.po - -commit 63bd26ede2995ae375a2a20c85a65e5f4bfbb37f -Author: Jorge González -Date: Tue Nov 30 23:37:32 2010 +0100 - - Updated Spanish translation - -M po/es.po - -commit 127502998657d78abad044624e41bf04a82bc2c2 -Author: Bruno Brouard -Date: Thu Nov 25 22:47:52 2010 +0100 - - Updated French translation - -M po/fr.po - -commit 997cf9973f4fc81ce6df531e03c044016e4d7842 -Author: Philip Withnall -Date: Mon Nov 22 22:07:02 2010 +0000 - - Don't use IT_PROG_INTLTOOL and AM_GNU_GETTEXT - - They conflict. See bgo#635134. - -M configure.ac - -commit 19459bc77e7dfe22401b3dcf85f216f51fb33378 -Author: Andrej Žnidaršič -Date: Mon Nov 22 18:18:04 2010 +0100 - - Updated Slovenian translation - -M help/sl/sl.po - -commit e80350e3b0f454d1a781302647c64c435939f620 -Author: Andrej Žnidaršič -Date: Sat Nov 20 10:50:50 2010 +0100 - - Updated Slovenian translation - -M po/sl.po - -commit 7c276a8e86cc39c55efd69690cf03a13d7aafddd -Author: Andrej Žnidaršič -Date: Thu Nov 18 19:48:14 2010 +0100 - - Updated Slovenian translation - -M help/sl/sl.po - -commit af27e4f0cbe713d6c2003be1ca47f2121cbd287e -Author: Flamarion Jorge -Date: Wed Nov 17 13:48:48 2010 -0200 - - Updated Brazilian Portuguese translation - -M po/pt_BR.po - -commit db095e7ef17156a3a54dbab9ff2cfab96b86dde3 -Author: Petr Kovar -Date: Tue Nov 16 19:41:04 2010 +0100 - - Update Czech translation by Marek Cernocky - -M po/cs.po - -commit af5387fcdf826bbc313a39944d22e963612488a6 -Author: Gabor Kelemen -Date: Sun Nov 14 22:31:29 2010 +0100 - - Updated Hungarian translation - -M po/hu.po - -commit d62fffa71743d3d70df7ff73465a55c823f67fe6 -Author: Philip Withnall -Date: Fri Nov 12 00:27:04 2010 +0000 - - Update British English translation - -M po/en_GB.po - -commit ea0270a9a9e152b9a9bcef88c2096dbfd70eca75 -Author: Philip Withnall -Date: Fri Nov 12 00:25:54 2010 +0000 - - Allow toggling both tags on a cell simultaneously - - This also adds a new type of undo/redo event corresponding to - toggling both - tags simultaneously. - -M src/interface.c -M src/main.h - -commit 2607ef47dc33545490646491e51eebd78ce2be33 -Author: Philip Withnall -Date: Fri Nov 12 00:18:05 2010 +0000 - - Ensure message dialogues have a parent window set where possible - -M src/interface.c -M src/main.c -M src/rules.c - -commit e25b51d0c464ccdc1e4a93645e4ff15cea2351dd -Author: Philip Withnall -Date: Fri Nov 12 00:15:16 2010 +0000 - - Include the current time in the win message - -M src/rules.c - -commit c560effeda5af2d1e43b7f4313c029b365d3ade0 -Author: Andre Klapper -Date: Tue Nov 9 21:08:38 2010 +0100 - - Add missing file to POTFILES.in so strings are translatable - -M po/POTFILES.in - -commit ab8f6617a05bda2454953dd826776816b537ccb0 -Author: Marek Černocký -Date: Mon Nov 8 13:03:41 2010 +0100 - - Updated Czech translation - -M po/cs.po - -commit 8e47d8c0e2820275d6c928d209a9a2f722d5227e -Author: Mario Blättermann -Date: Sun Nov 7 16:42:32 2010 +0100 - - [l10n] Updated German translation - -M po/de.po - -commit 0371b7356655107d72dac36e0e0e53c1e9a94bae -Author: Andrej Žnidaršič -Date: Fri Nov 5 15:04:04 2010 +0100 - - Updated Slovenian translation - -M po/sl.po - -commit ec90823e01b35f477cd5975c8d4c66c4f3599795 -Author: Jorge González -Date: Sun Oct 31 21:53:06 2010 +0100 - - Updated Spanish translation - -M po/es.po - -commit 7f72414ed7318f6f2b9021ec50b2e20313f112a3 -Author: Philip Withnall -Date: Sun Oct 31 13:29:52 2010 +0000 - - Fix race condition when requesting a new hint - - If a new hint was requested just as soon as an existing hint was - finishing, - the timeout for the old hint would never be removed, and the new - hint would - flash twice as fast as it should. This tidies up hinting so that - this can't - happen. - -M src/interface.c -M src/main.h - -commit fcbf41a784f12e1594b67f86ff6caa4daf780182 -Author: Philip Withnall -Date: Sun Oct 31 13:11:45 2010 +0000 - - Update British English documentation translation - -M help/en_GB/en_GB.po - -commit 4fdfc8fcb76cfbafbf2a60376f5f3fa9e9b58a5c -Author: Philip Withnall -Date: Sun Oct 31 13:09:23 2010 +0000 - - Update British English translation - -M help/en_GB/en_GB.po -M po/en_GB.po - -commit 2f02a89846ec0fd07bb3ee6dda182f33a941d337 -Author: Philip Withnall -Date: Sun Oct 31 13:00:57 2010 +0000 - - Update the documentation - -M help/C/figures/hitori_main_window.png -M help/C/strategy.page - -commit 4e0094d98e3c12d1939bb8162e36d8241d03ac1b -Author: Philip Withnall -Date: Sun Oct 31 13:00:38 2010 +0000 - - Draw errors for cells violating rule 3 - -M src/rules.c - -commit 87a9e89c87623f721556b7e6dc5f78873a08228f -Author: Philip Withnall -Date: Sun Oct 31 12:28:11 2010 +0000 - - Pause the timer when the window's minimised - -M data/hitori.ui -M src/interface.c - -commit 1ea72d5802116525533bb70b531e7b134b527544 -Author: Philip Withnall -Date: Sun Oct 31 12:14:58 2010 +0000 - - Highlight errors using font colour and weight - - This looks better than changing the cell background to purple and - makes errors - more accessible, as they're no longer signalled purely via colour. - -M src/interface.c - -commit 2d06ed76c0009ca42bc2cbd75fe19fd4fca73791 -Author: Philip Withnall -Date: Sun Oct 31 12:03:15 2010 +0000 - - Tidy up the drawing code a little - -M src/interface.c - -commit dd89a9121930286b5108fe0aa536c8f112d854f6 -Author: Philip Withnall -Date: Sun Oct 31 11:59:04 2010 +0000 - - Fade out tags for painted cells - - Instead of drawing them in a darker shade, reduce their alpha - component so - they're faded out. This makes the board easier to read. - -M src/interface.c - -commit e04e7a6190f3e1c50831b022c6374a15a87d69ef -Author: Philip Withnall -Date: Sun Oct 31 11:54:07 2010 +0000 - - Reduce the font size of painted cells - - This makes the game more accessible, as the paint state of cells is - no longer - purely indicated by the cells' text colour. It also makes the board - easier to - read. - -M src/interface.c -M src/main.c -M src/main.h - -commit 620936a99d81d4321a31d3ff08afb63bf7208ac2 -Author: Philip Withnall -Date: Sun Oct 31 11:40:39 2010 +0000 - - Change the colour of one of the tags from red to blue - - It's calmer, and looks less like an error condition. - -M src/interface.c - -commit 5f8e7d8ad4e4d67ca95a1017263bd8c74803f257 -Author: Philip Withnall -Date: Sun Oct 31 11:30:38 2010 +0000 - - Highlight all cells which break rule 2 instead of just the first - -M src/generator.c -M src/interface.c -M src/main.c -M src/main.h -M src/rules.c - -commit 9e4887fbe07195006cf6c842f08eb2f9781a688b -Author: Philip Withnall -Date: Sun Oct 31 11:13:41 2010 +0000 - - Fix expansion of the statusbar - -M data/hitori.ui - -commit 4c4a9c5a04e7261c9387fef242291bf4045ed89a -Author: Philip Withnall -Date: Sun Oct 31 11:13:29 2010 +0000 - - Prevent multiple hints being triggered at the same time - -M src/interface.c - -commit 75da4bfe0815652d951a4216955b507e533bd73e -Author: Philip Withnall -Date: Sun Oct 31 11:10:45 2010 +0000 - - Make the hint line thicker - -M src/interface.c - -commit b5e1b07672099b0739fbe00c80cd905d4d6d17ef -Author: Philip Withnall -Date: Sun Oct 31 11:06:06 2010 +0000 - - Bug 575897 — Add timing support - - Add a statusbar with a timer in it. Closes: bgo#575897 - -M data/hitori.ui -M src/interface.c -M src/main.c -M src/main.h - -commit 4045eea37dde00bd409f95f24c68a4bf0ff75620 -Author: Mario Blättermann -Date: Sat Oct 30 21:13:49 2010 +0200 - - [l10n] Updated German translation - -M po/de.po - -commit b6465dafbbc4736b23a4f5b684c18f6892817e15 -Author: Andrej Žnidaršič -Date: Sat Oct 30 10:29:09 2010 +0200 - - Updated Slovenian translation - -M po/sl.po - -commit 955c23ca6c891b061d0cccb134492de5d918bf63 -Author: Marek Černocký -Date: Fri Oct 29 21:00:47 2010 +0200 - - Updated Czech translation - -M po/cs.po - -commit d8dccc29e1113bd66dea8be75daa20a84154055d -Author: Joe Hansen -Date: Fri Oct 29 00:26:40 2010 +0200 - - Updated Danish translation of the documentation - -M help/da/da.po - -commit 53a2a373536b37414b8874cb967f6d13300d9a40 -Author: Jorge González -Date: Fri Oct 29 00:24:57 2010 +0200 - - Updated Spanish translation - -M po/es.po - -commit 6a7749677ec1ae75a342f333b0c07c390fcf1299 -Author: Philip Withnall -Date: Thu Oct 28 18:17:54 2010 +0100 - - Use GTK+'s redraw methods instead of redrawing ourselves - - This simplifies the drawing code and means we don't get as much - flickering, - as we're no longer side-stepping GTK+'s double buffering. - -M src/interface.c -M src/interface.h -M src/main.c - -commit a20daa3f0d50f11f30492c7b4ceca2c448574269 -Author: Philip Withnall -Date: Thu Oct 28 18:03:26 2010 +0100 - - Split rule checking out from the drawing code - -M src/interface.c -M src/interface.h -M src/rules.c -M src/rules.h - -commit e5a751639ccb7ddf4b499eecc9169cfbd3435dfe -Author: Philip Withnall -Date: Thu Oct 28 17:46:57 2010 +0100 - - Port to GTK+ 3 - - This bumps the dependency on GTK+ to 3 unconditionally, and does - a basic - port of the interface drawing code to it. - -M configure.ac -M data/hitori.ui -M src/interface.c - -commit 096cee944348851168d5e45c5398f247b1fcb14f -Author: Philip Withnall -Date: Thu Oct 28 16:49:14 2010 +0100 - - Post-release version bump to 0.3.0 - -M configure.ac - -commit 98d87dee9e4de30eba0498c36293126575f136ee -Author: Philip Withnall -Date: Thu Oct 28 16:44:28 2010 +0100 - - Release version 0.2.5 - -M NEWS -M configure.ac -M src/interface.c - -commit e2ab407ad0974535bd2eadd2ada00eeae0a0f3f8 -Author: Philip Withnall -Date: Thu Oct 28 16:29:36 2010 +0100 - - Update British English translation - -M po/en_GB.po - -commit 3623148f1b35a4086c2e7db65978dd9554e240ff -Author: Philip Withnall -Date: Thu Oct 28 16:28:54 2010 +0100 - - Remove non-translatable text from a translatable message - -M src/interface.c - -commit d9a37ec05cc1c374ffee69da5dae516f98f5a0f8 -Author: Philip Withnall -Date: Thu Oct 28 16:27:44 2010 +0100 - - Use Unicode quotation marks instead of ASCII ones - -M src/interface.c - -commit 335754495fa867746a0c2a7264a262afa5cc884a -Author: Philip Withnall -Date: Thu Oct 28 16:27:31 2010 +0100 - - Remove an extraneous hyphen from a translatable message - -M src/main.c - -commit 230be4a3dcb7713f59862dbf20c8cccd5fa252ef -Author: Philip Withnall -Date: Thu Oct 28 16:23:46 2010 +0100 - - Fix formatting of error dialogue messages - -M src/interface.c -M src/main.c - -commit 9f3ec3ad305b266908488fc597ca4a40f9999cf0 -Author: Philip Withnall -Date: Thu Oct 28 10:31:24 2010 +0100 - - Bug 575896 — Improve board generation algorithm - - The algorithm wasn't allowing any painted cells at the edge of - the board. - This fixes that problem, and improves the code documentation a little. - Closes: bgo#575896 - -M src/generator.c - -commit ea666e414166c50d0df75c486584d4b00167427e -Author: Matej Urbančič -Date: Fri Oct 22 14:46:29 2010 +0200 - - Added sl for Slovenian translation - -M help/Makefile.am - -commit dd6c433955f27138e355dcd77ea4a754e453fc97 -Author: Matej Urbančič -Date: Fri Oct 22 14:46:16 2010 +0200 - - Added Slovenian translation - -A help/sl/sl.po - -commit c9d3e1787fcd68ea63edf82efcb96a1bb73c9e49 -Author: Philip Withnall -Date: Sun Oct 17 21:08:36 2010 +0100 - - Remove use of sealed GTK+ struct members - - Hitori now compiles with GSEAL_ENABLE. - -M src/interface.c - -commit f60123b0d3f9d69f454a1cd51005707e9a9f0d3f -Author: Philip Withnall -Date: Sun Oct 17 20:55:01 2010 +0100 - - Don't use INTLTOOL_DESKTOP_RULE - - Since we've switched to non-recursive automake and subdir-objects, - it breaks - when builddir != srcdir due to lp#605826. We copy the rule in and - fix it up - to not break. - -M Makefile.am - -commit c1245cc5fe5ab5e3c0ccda78136a096b6157460d -Author: Philip Withnall -Date: Sun Oct 17 20:46:55 2010 +0100 - - Ensure all files are cleaned and git ignored as appropriate - -M Makefile.am -M help/Makefile.am - -commit 73fedad548602c05a026826831628d16362f28ec -Author: Philip Withnall -Date: Sun Oct 17 20:24:45 2010 +0100 - - Update git.mk from Pango - -M git.mk - -commit bd191ed5bb98f85d2b8ea2763f84e60c337d7426 -Author: Philip Withnall -Date: Sun Oct 17 20:23:32 2010 +0100 - - Clean up configure.ac some more - -M configure.ac - -commit 1f053c25631ad5021457e2314286ecd0bfd4fdca -Author: Philip Withnall -Date: Sun Oct 17 20:17:33 2010 +0100 - - Clean up configure.ac some more - - Also enable deprecation flags and stricter compiler warnings. - -M Makefile.am -M configure.ac - -commit 8ed9292bf92bfd7b9260c9481a97b3c1f9c67d6a -Author: Philip Withnall -Date: Sun Oct 17 20:09:30 2010 +0100 - - Add silent-rules support - -M configure.ac - -commit a98159e9a05ec2d8b931315032d16a8b9df1d7f8 -Author: Philip Withnall -Date: Sun Oct 17 20:08:06 2010 +0100 - - Modernise configure.ac - - Act on the output of `autoupdate` and `autoscan` to remove deprecated - macros from configure.ac. - -M configure.ac - -commit ef09bd80bbb2a2e1e6bd5ba34fd47c5c7d512d56 -Author: Philip Withnall -Date: Sun Oct 17 20:00:52 2010 +0100 - - Convert to non-recursive automake - - The help/ and po/ directories still have to be recursed into, because - gnome-doc-utils and intltool don't play nicely with non-recursive - automake. - -M Makefile.am -M configure.ac -D data/Makefile.am -D data/icons/16x16/Makefile.am -D data/icons/22x22/Makefile.am -D data/icons/32x32/Makefile.am -D data/icons/48x48/Makefile.am -D data/icons/Makefile.am -D src/Makefile.am - -commit 9991c317a40cfa187edd3dcc9ae2d2bb377a9b4b -Author: Jorge González -Date: Wed Oct 13 12:21:32 2010 +0200 - - Updated Spanish translation - -M help/es/es.po - -commit 634fe3e5eb77ab2d811bbea19f184af76f77b35e -Author: Philip Withnall -Date: Sat Oct 9 00:12:10 2010 +0100 - - Use upstream gettext instead of GLib's gettext - - As explained here: http://blogs.gnome.org/jjardon/2010/10/08 - /use-upstream-gettext-instead-the-glib-one/. - -M configure.ac - -commit 1c545f508d78d963dee1ba3ffe51345097bd20a7 -Author: Mario Blättermann -Date: Fri Jul 16 22:20:10 2010 +0200 - - [i18n] Updated German translation - -M help/de/de.po - -commit 643a7b4dd0d7200077b8fb82dabcb7b5b05c8a2d -Author: Philip Withnall -Date: Wed Jul 14 22:22:14 2010 +0100 - - Fix documentation page IDs - -M help/C/customization.page -M help/C/playing.page - -commit 4047e55a6783e238d733a16d93af913dbd6e5798 -Author: Philip Withnall -Date: Wed Jul 14 22:21:56 2010 +0100 - - Add a strategy page to the documentation - -M help/C/index.page -A help/C/strategy.page -M help/Makefile.am - -commit 135ec43dadddb5c9b0f7922a40ee29e526ba1d84 -Author: Philip Withnall -Date: Wed Jul 14 21:54:26 2010 +0100 - - Convert documentation to Mallard - -A help/C/customization.page -A help/C/game.page -D help/C/hitori.xml -A help/C/index.page -D help/C/legal.xml -A help/C/license.page -A help/C/playing.page -M help/Makefile.am -M help/hitori.omf.in - -commit 8e16b0460bdbf0988b0b706b38e94abc4cd4371f -Author: Philip Withnall -Date: Wed Jul 14 20:22:54 2010 +0100 - - Remove the documentation credits - - They're unsupported by Mallard, which we're porting to, and it - was only - my name anyway. Helps: bgo#624308 - -M help/Makefile.am -M src/interface.c - -commit 1018fb8d47d1a8042cb97073e855c35c6cbe2df9 -Author: Philip Withnall -Date: Wed Jul 14 09:17:06 2010 +0100 - - Release version 0.2.4 - -M NEWS -M configure.ac - -commit 92ace9d415026f55899a42f1bdcc999d80db26b0 -Author: Philip Withnall -Date: Wed Jul 14 09:09:52 2010 +0100 - - Remove generated file from git - -D config.h.in - -commit 3dbc9f8441e763d2abf21795b1e2bdabbb8b66d5 -Author: Fran Diéguez -Date: Mon Jun 21 11:00:46 2010 +0200 - - Updated Galician translations - -M po/gl.po - -commit 350afe9c4915ff9dddcd963744153824109b6375 -Author: Matej Urbančič -Date: Sun Apr 25 10:36:07 2010 +0200 - - Updated Slovenian translation - -M po/sl.po - -commit 91681944bc827436634a923ade3af876692d65e9 -Author: Andika Triwidada -Date: Tue Apr 13 20:49:54 2010 +0700 - - Initial Indonesian translation by Imam Musthaqim - Added id to LINGUAS - -M po/LINGUAS -A po/id.po - -commit bdf3e5985c751f60aa8f5e986be4b5b786684e83 -Author: zhang ping -Date: Mon Mar 29 15:26:16 2010 +0800 - - Add Simplified Chinese translation. - -M help/Makefile.am -A help/zh_CN/zh_CN.po - -commit b2c283a65e91f0923ea3f45206f81efa72d47926 -Author: Kjartan Maraas -Date: Mon Mar 15 14:27:54 2010 +0100 - - Add Norwegian language entry. - -M po/LINGUAS - -commit 3086a9f0f8aba903192c757841d88f1b0a1214c7 -Author: Kjartan Maraas -Date: Mon Mar 15 14:27:44 2010 +0100 - - Added Norwegian bokmål translation - -A po/nb.po - -commit 0d46701826f7edaee2fe2785538e36a78f305e9f -Author: Jorge González -Date: Thu Feb 18 15:01:35 2010 +0100 - - Updated Spanish translation - -M help/es/es.po - -commit fdf1ebb941f889c1d920f848a3a4d576bcf53f42 -Author: Kenneth Nielsen -Date: Fri Dec 18 00:23:16 2009 +0100 - - Added da to list of languages - -M help/Makefile.am - -commit 2c20fda01fa80b79789b28d7823aa20278c46e57 -Author: Joe Hansen -Date: Fri Dec 18 00:22:43 2009 +0100 - - Added Danish translation of manual - -A help/da/da.po - -commit 8eb0855352322ee45db3b5556f12455f70c1210d -Author: Matej Urbančič -Date: Thu Dec 17 09:24:56 2009 +0100 - - Added sl for Slovenian translation - -M po/LINGUAS - -commit eb8f3c160ebbfa1aecf22f269653088a1cc30d51 -Author: Andrej Žnidaršič -Date: Thu Dec 17 09:24:49 2009 +0100 - - Updated Slovenian translation - -A po/sl.po - -commit ca82305ab12ad67c25b9369511a17136b01d4e46 -Author: Philip Withnall -Date: Fri Nov 6 20:52:24 2009 +0000 - - Release version 0.2.3 - -M NEWS -M config.h.in -M configure.ac - -commit a45262e4be1ade9c1737d01a5dd7af3b876fd95a -Author: Philip Withnall -Date: Fri Nov 6 20:39:10 2009 +0000 - - Bug 599867 — rejects valid solutions, bug in hitori_check_rule3 - - Patch from Peter De Wachter to reimplement - the rule - 3 check as a simple floodfill algorithm, to fix cases where it was - incorrectly failing. Closes: bgo#599867 - - Also rename a variable so it doesn't conflict with the time() - function. - -M src/generator.c -M src/rules.c - -commit 5b28f47e97630cc13ef41874436b776a519bab19 -Author: Petr Kovar -Date: Sat Oct 10 17:59:51 2009 +0200 - - Added Czech help translation by Marek Cernocky - - Reviewed by: Petr Kovar. - -M help/Makefile.am -A help/cs/cs.po -A help/cs/figures/hitori_main_window.png - -commit 4a922343b19640b3d54235e8b0eea4b5b8bd5ba3 -Author: Petr Kovar -Date: Tue Oct 6 00:54:21 2009 +0200 - - Added Czech translation by Marek Cernocky - - Reviewed by: Petr Kovar. - -M po/LINGUAS -A po/cs.po - -commit 78dec22e0429e8eb039fa8f16613173c567117a8 -Author: Joe Hansen -Date: Fri Oct 2 00:25:34 2009 +0200 - - Added Danish translation - -A po/da.po - -commit d045e7dd732de9f74396865ba2c6611f7921bd3a -Author: Kenneth Nielsen -Date: Fri Oct 2 00:24:24 2009 +0200 - - Added da to list of languages - -M po/LINGUAS - -commit fc3c0f02c940ffc963b6242f7c50dd9e80b42d9a -Author: Kostas Papadimas -Date: Sat Sep 12 19:11:52 2009 +0300 - - Added Greek translation. - -A po/el.po - -commit 306d8226eb011001c04d9a53cedd1109f9bf9dd9 -Author: Kostas Papadimas -Date: Sat Sep 12 19:11:22 2009 +0300 - - Added Greek translation. - -M po/LINGUAS - -commit 7e1495859bdc7ee268d1c13982f1dd2a9d64de77 -Author: Fran Dieguez -Date: Sat Aug 22 16:33:33 2009 +0200 - - Added Galician Translation - -M po/LINGUAS -A po/gl.po - -commit 06487c9f4ff0e77994ccc59b99a98b8004df00e6 -Author: A S Alam -Date: Tue Jun 16 06:37:01 2009 +0530 - - Add new translation pa.po for Punjabi and Update LINGUAS file - -M po/LINGUAS -A po/pa.po - -commit 05c8f7c66668a30e076a8bfec4fad38e64dfa384 -Author: Jorge Gonzalez -Date: Sun Jun 7 23:45:01 2009 +0200 - - Added es to DOC_LINGUAS - -M help/Makefile.am - -commit af7a68767c0e2e09a841607eb9e955636b621974 -Author: Jorge Gonzalez -Date: Sun Jun 7 23:44:52 2009 +0200 - - Updated Spanish translation - -A help/es/es.po - -commit 4a00210ea2e5b49468a26d9131a33350018bb5a1 -Author: Gabor Kelemen -Date: Sat May 9 01:10:13 2009 +0200 - - Add hu to LINGUAS - -M po/LINGUAS - -commit 23bcb85b3b05f508aff6faa9943bd623aa619c85 -Author: Gabor Kelemen -Date: Sat May 9 01:00:32 2009 +0200 - - Added Hungarian translation - - hu.po: New translation by Tamas Nemeth - LINGUAS: Added hu - -A po/hu.po - -commit 7f81f8b66942627d3e2788742e99d174f6a1e5e7 -Author: Philip Withnall -Date: Sun Apr 26 16:19:06 2009 +0100 - - Fixed e-mail address in DOAP file - -M hitori.doap - -commit 34169ac2fbef1c5eff5978393a8ab67bbaae4ab4 -Author: Zhang Miao -Date: Sat Apr 25 19:19:37 2009 +0800 - - Added Simplified Chinese translation. - -M po/LINGUAS -A po/zh_CN.po - -commit d8b3c2f3f5b0eeec352bbddb71f378bc984d429e -Author: Philip Withnall -Date: Wed Apr 22 00:24:00 2009 +0100 - - Removed extraneous execute permissions - -M help/ChangeLog.pre-0-2-2 - -commit 9cb503bf1faf56fa988261933c6522f32c9278cf -Author: Philip Withnall -Date: Tue Apr 21 07:35:57 2009 +0100 - - Updated repository for git - - .gitignore files are now generated by pango's git.mk, the ChangeLog - is now - generated on dist, a DOAP file has been added to give cgit a module - description, and the old .bzrignore file has been deleted. - -D .bzrignore -R100 ChangeLog ChangeLog.pre-0-2-2 -M Makefile.am -M data/Makefile.am -M data/icons/16x16/Makefile.am -M data/icons/22x22/Makefile.am -M data/icons/32x32/Makefile.am -M data/icons/48x48/Makefile.am -M data/icons/Makefile.am -A git.mk -R100 help/ChangeLog help/ChangeLog.pre-0-2-2 -M help/Makefile.am -A hitori.doap -R100 po/ChangeLog po/ChangeLog.pre-0-2-2 -M src/Makefile.am - -commit c8a13ad0601ba87a28318195a3bd92dc93ea3d89 -Author: Claude Paroz -Date: Mon Apr 6 18:42:25 2009 +0000 - - Added French translation by Laurent Coudeur and Bruno Brouard. - - 2009-04-06 Claude Paroz - - * LINGUAS: - * fr.po: Added French translation by Laurent Coudeur and - Bruno Brouard. - - svn path=/trunk/; revision=68 - -M po/ChangeLog -M po/LINGUAS -A po/fr.po - -commit 44134d2ed21e8b387bc091b65f544a08b5c39e1d -Author: Philip Withnall -Date: Sun Apr 5 16:56:08 2009 +0000 - - Bump to version 0.2.2. - - 2009-04-05 Philip Withnall - - * NEWS: - * configure.ac: Bump to version 0.2.2. - - - svn path=/trunk/; revision=66 - -M ChangeLog -M NEWS -M configure.ac diff -Nru hitori-3.22.4/ChangeLog.pre-0-2-2 hitori-3.31.0/ChangeLog.pre-0-2-2 --- hitori-3.22.4/ChangeLog.pre-0-2-2 2016-12-20 13:30:40.000000000 +0000 +++ hitori-3.31.0/ChangeLog.pre-0-2-2 1970-01-01 00:00:00.000000000 +0000 @@ -1,416 +0,0 @@ -============ Version 0.2.2 - -2009-04-05 Philip Withnall - - * NEWS: - * configure.ac: Bump to version 0.2.2. - -2009-04-05 Philip Withnall - - * README: Updated the README to give the new website. - * src/interface.c (hitori_about_cb): Updated the About dialogue to - give the new website, and to fix the punctuation in the copyright - string. - -2009-03-09 Philip Withnall - - * configure.ac: Modernised how the options are presented. - - Updated svn:ignore properties. - -2009-03-09 Philip Withnall - - * src/interface.c (hitori_button_release_cb), (hitori_update_hint), - (hitori_hint_cb): Fixed hinting so that hint rectangles don't get - stuck on the board any more. - -2009-03-09 Philip Withnall - - * Makefile.am: - * src/interface.c (hitori_draw_board), (hitori_undo_cb), - (hitori_redo_cb), (hitori_about_cb): - * src/main.h: - * src/rules.c (hitori_check_rule3): Fix some warnings, and list the - documenters in the About dialogue. - -2009-03-02 Philip Withnall - - * src/main.c (main): Added a translator comment. - -2009-03-01 Philip Withnall - - * src/interface.c (hitori_create_interface), (hitori_contents_cb), - (hitori_about_cb): - * src/main.c (main): Fixed some calls to printf()-style functions - without format specifiers, and some bad code for displaying the help. - -2009-03-01 Philip Withnall - - Updated svn:ignore properties. - -============ Version 0.2.1 - -2008-07-08 Philip Withnall - - * data/icons/16x16/Makefile.am: - * data/icons/22x22/Makefile.am: - * data/icons/32x32/Makefile.am: - * data/icons/48x48/Makefile.am: Include the SVG versions of the icons - in the tarball. - * src/Makefile.am: Revert change of binary installation location. - * NEWS: - * README: - * configure.ac: Bump to version 0.2.1. - -2008-07-08 Philip Withnall - - * .bzrignore: - * gnome-doc-utils.make: - * autogen.sh: Converted to use gnome-autogen.sh. - * Makefile.am: Fixed to include COPYING-DOCS in the tarball. - * src/Makefile.am: Fixed to put the binary in /usr/games. - -2008-06-29 Philip Withnall - - * data/hitori.desktop.in: Removed incorrect Bugzilla details. - -============ Version 0.2 - -2008-06-27 Philip Withnall - - * ChangeLog: Ported bzr history to ChangeLogs. - * data/icons/16x16/hitori.svg: - * data/icons/22x22/hitori.svg: - * data/icons/32x32/hitori.svg: - * data/icons/48x48/hitori.svg: Added SVG sources for icons by Jakub - Szypulka . - * data/hitori.ui: Used the correct glyphs for board sizes and made many - UI strings translatable. - * src/Makefile.am: Tidied up autofoo a little. - * .bzrignore: Updated bzr ignore lists. - * NEWS: - * README: - * configure.ac: Bump to version 0.2. - -2008-06-26 Philip Withnall - - * configure.ac: - * data/Makefile.am: - * data/hitori.desktop.in: Added desktop file. - * data/icons/16x16/Makefile.am: - * data/icons/16x16/hitori.png: - * data/icons/22x22/Makefile.am: - * data/icons/22x22/hitori.png: - * data/icons/32x32/Makefile.am: - * data/icons/32x32/hitori.png: - * data/icons/48x48/Makefile.am: - * data/icons/48x48/hitori.png: - * data/icons/Makefile.am: Added icon by Jakub Szypulka. - * .bzrignore: Updated bzr ignore lists. - -2008-06-22 Philip Withnall - - * src/interface.c: - * src/rules.c: Rewrote the check for rule 3 to be a lot cleaner, and - ensured that the board is redrawn before the win message is displayed. - -2008-06-22 Philip Withnall - - * src/interface.c: - * src/main.c: - * src/main.h: - * src/rules.c: Added error highlighting. - -2008-06-22 Philip Withnall - - * src/generator.c: - * src/interface.c: - * src/interface.h: - * src/main.c: - * src/main.h: - * src/rules.c: Lots of cleanup and refactoring to reduce memory - footprint. - -2008-06-08 Philip Withnall - - * .bzrignore: Updated bzr ignore lists. - * src/main.c: Improved an error message. - -2008-06-08 Philip Withnall - - * data/hitori.ui: Added a menu entry to open the help. - * configure.ac: - * src/generator.c: - * src/interface.c: Modified the code to seed the random number generator - so that starting two new games in rapid succession results in different - games. - -2008-06-08 Philip Withnall - - * data/hitori.ui: Fixed some problems with the UI file, and ensured the - window can't be made too small. - * src/interface.c: - * src/main.c: Changed the renderer to use GtkStyle colours where - possible, and updated other colours to be Tango-compliant. - -2008-06-08 Philip Withnall - - * COPYING-DOCS: - * gnome-doc-utils.make: - * .bzrignore: - * Makefile.am: - * configure.ac: Added documentation. - -2008-05-21 Philip Withnall - - * src/interface.c: Improvements to the hint code to prevent it - occasionally highlighting the first cell in error. - -2008-05-21 Philip Withnall - - * src/interface.c: Improve hint drawing a little. - -2008-04-20 Philip Withnall - - * README: - * src/generator.c: - * src/generator.h: - * src/interface.c: - * src/interface.h: - * src/main.c: - * src/main.h: - * src/rules.c: - * src/rules.h: Relicensed to GPLv3+ and updated links to the project - website. - -2008-04-20 Philip Withnall - - * src/generator.c: - * src/main.c: - * src/main.h: Fix a few more small memory leaks, and switch to - allocating the board with g_slices, rather than plain old malloc. - -2008-04-20 Philip Withnall - - * src/generator.c: - * src/main.c: Fixed some memory leaks and added a few bits of code - documentation. - * src/rules.c: Fixed the rule 3 check so that it takes painted cells - into account correctly. - -2008-04-20 Philip Withnall - - * src/generator.c: - * src/generator.h: Re-generate the random number seed for each new - board generated. - * src/interface.c: - * src/interface.h: Add code to fall back to the build directory UI - file if we can't load the install directory one. - * src/main.c: - * src/rules.c: Clear the board when there's the possibility it's been - resized, to prevent draw glitches. Improve font rendering. - -2008-04-20 Philip Withnall - - * .bzrignore: - * AUTHORS: - * COPYING: - * ChangeLog: - * Makefile.am: - * NEWS: - * README: - * config.h.in: - * configure.ac: - * data/Makefile.am: - * data/hitori.ui: - * src/Makefile.am: - * src/generator.c: - * src/generator.h: - * src/interface.c: - * src/interface.h: - * src/main.c: - * src/main.h: - * src/rules.c: - * src/rules.h: Some Makefile cleanup, and the introduction of an - --enable-debug compilation option to simplify things. - -2007-11-08 Philip Withnall - - * data/hitori.ui: - * src/generator.c: - * src/generator.h: - * src/interface.c: - * src/main.c: - * src/main.h: Hooked up the interface to allow changing the size of the - board, which now works completely. - -2007-11-06 Philip Withnall - - * src/generator.c: - * src/interface.c: - * src/main.c: - * src/main.h: - * src/rules.c: The initial work to make the board size dynamic has now - been done, and apart from a double-free on exit, is all working well. - -2007-11-01 Philip Withnall - - * .bzrignore: Finished repository cleanup. - -2007-11-01 Philip Withnall - - * INSTALL: - * TODO.tasks: - * config.guess: - * config.sub: - * depcomp: - * hitori.anjuta: - * install-sh: - * ltmain.sh: - * missing: - * mkinstalldirs: - * .bzrignore: More repository cleanup. - -2007-11-01 Philip Withnall - - * Makefile.in: - * aclocal.m4: - * configure: - * data/Makefile.in: - * intltool-extract.in: - * intltool-merge.in: - * intltool-update.in: - * po/Makefile.in.in: - * src/Makefile.in: - * .bzrignore: More repository cleanup. - -2007-11-01 Philip Withnall - - * intltool-extract: - * intltool-merge: - * intltool-update: Repository cleanup. - * .bzrignore: - * src/interface.c: - * src/main.c: - * src/main.h: - * src/rules.c: Added --seed option to allow regeneration of previous - boards. Cleaned up debug output, as well as the internationalisation. - -2007-09-13 Philip Withnall - - * README: - * src/interface.c: Changed Ben's e-mail address. - -============ Version 0.1 - -2007-09-13 Philip Withnall - - * Makefile.am: - * Makefile.in: - * src/interface.c: - * src/main.h: Fixed UI file location, and cleaned up Makefiles for - release. - -2007-09-13 Philip Withnall - - * src/main.c: Added seeding to random-number generation. - -2007-09-13 Philip Withnall - - * aclocal.m4: - * configure: - * configure.ac: - * data/Makefile.in: - * src/Makefile.am: - * src/Makefile.in: - * Makefile.in: Makefile changes to add Cairo as a proper dependency. - * README: Documentation updates, making sure I've got the website - right. - * src/generator.c: - * src/interface.c: - * src/main.c: - * src/main.h: Interface fixes, meaning that you can no longer play on - with a game after winning. A bug was also fixed with the hinting - system, so that hinting stops when you change a cell. - * src/rules.c: Fixed the rule-checking function for rule 1, which was - broken due to using the wrong variable name. - -2007-09-03 Philip Withnall - - * src/interface.c: Added winning message. - -2007-09-03 Philip Withnall - - * AUTHORS: - * NEWS: - * README: Updated documentation. - * src/interface.c: - * src/main.c: Added GOption support for the --debug parameter. - -2007-09-03 Philip Withnall - - * .bzrignore: Repository cleanup. - * data/hitori.ui: - * src/generator.c: - * src/generator.h: - * src/interface.c: - * src/interface.h: - * src/main.c: - * src/main.h: - * src/rules.c: - * src/rules.h: Added polish. - -2007-09-03 Philip Withnall - - * data/hitori.ui: - * src/generator.c: - * src/interface.c: - * src/interface.h: - * src/main.c: - * src/main.h: - * src/rules.c: Added support for hints, fixed some bugs with the undo - stack, and did some more cleanup. - -2007-09-03 Philip Withnall - - * data/hitori.ui: Linked up some of the menus. - * src/interface.c: - * src/main.c: - * src/main.h: Added undo/redo support. - -2007-09-03 Philip Withnall - - * src/Makefile.am: - * src/Makefile.in: - * src/rules.c: - * src/rules.h: Split rule-checking functions out into a different file - and finished them off. - * data/hitori.ui: - * src/generator.c: - * src/interface.c: - * src/main.c: - * src/main.h: Created the menus, and did some cleanup. - -2007-09-03 Philip Withnall - - * src/generator.c: - * src/generator.h: Wrote a proper generator using Ben's method. - * src/Makefile.in: - * src/interface.c: - * src/interface.h: - * src/main.c: - * src/main.h: Cleaned up a lot of code. - -2007-09-02 Philip Withnall - - * src/Makefile.am: - * src/interface.c: - * src/interface.h: - * src/main.c: - * src/main.h: Validation, rewritten drawing code, and various cleanups. - It mostly works now, apart from board generation. - -2007-08-27 Philip Withnall - - Initial commit. So far, rendering is preliminarily working, and you - can toggle the paint overlay on cells. diff -Nru hitori-3.22.4/compile hitori-3.31.0/compile --- hitori-3.22.4/compile 2017-10-02 08:08:04.000000000 +0000 +++ hitori-3.31.0/compile 1970-01-01 00:00:00.000000000 +0000 @@ -1,347 +0,0 @@ -#! /bin/sh -# Wrapper for compilers which do not understand '-c -o'. - -scriptversion=2012-10-14.11; # UTC - -# Copyright (C) 1999-2014 Free Software Foundation, Inc. -# Written by Tom Tromey . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# This file is maintained in Automake, please report -# bugs to or send patches to -# . - -nl=' -' - -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent tools from complaining about whitespace usage. -IFS=" "" $nl" - -file_conv= - -# func_file_conv build_file lazy -# Convert a $build file to $host form and store it in $file -# Currently only supports Windows hosts. If the determined conversion -# type is listed in (the comma separated) LAZY, no conversion will -# take place. -func_file_conv () -{ - file=$1 - case $file in - / | /[!/]*) # absolute file, and not a UNC file - if test -z "$file_conv"; then - # lazily determine how to convert abs files - case `uname -s` in - MINGW*) - file_conv=mingw - ;; - CYGWIN*) - file_conv=cygwin - ;; - *) - file_conv=wine - ;; - esac - fi - case $file_conv/,$2, in - *,$file_conv,*) - ;; - mingw/*) - file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` - ;; - cygwin/*) - file=`cygpath -m "$file" || echo "$file"` - ;; - wine/*) - file=`winepath -w "$file" || echo "$file"` - ;; - esac - ;; - esac -} - -# func_cl_dashL linkdir -# Make cl look for libraries in LINKDIR -func_cl_dashL () -{ - func_file_conv "$1" - if test -z "$lib_path"; then - lib_path=$file - else - lib_path="$lib_path;$file" - fi - linker_opts="$linker_opts -LIBPATH:$file" -} - -# func_cl_dashl library -# Do a library search-path lookup for cl -func_cl_dashl () -{ - lib=$1 - found=no - save_IFS=$IFS - IFS=';' - for dir in $lib_path $LIB - do - IFS=$save_IFS - if $shared && test -f "$dir/$lib.dll.lib"; then - found=yes - lib=$dir/$lib.dll.lib - break - fi - if test -f "$dir/$lib.lib"; then - found=yes - lib=$dir/$lib.lib - break - fi - if test -f "$dir/lib$lib.a"; then - found=yes - lib=$dir/lib$lib.a - break - fi - done - IFS=$save_IFS - - if test "$found" != yes; then - lib=$lib.lib - fi -} - -# func_cl_wrapper cl arg... -# Adjust compile command to suit cl -func_cl_wrapper () -{ - # Assume a capable shell - lib_path= - shared=: - linker_opts= - for arg - do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - eat=1 - case $2 in - *.o | *.[oO][bB][jJ]) - func_file_conv "$2" - set x "$@" -Fo"$file" - shift - ;; - *) - func_file_conv "$2" - set x "$@" -Fe"$file" - shift - ;; - esac - ;; - -I) - eat=1 - func_file_conv "$2" mingw - set x "$@" -I"$file" - shift - ;; - -I*) - func_file_conv "${1#-I}" mingw - set x "$@" -I"$file" - shift - ;; - -l) - eat=1 - func_cl_dashl "$2" - set x "$@" "$lib" - shift - ;; - -l*) - func_cl_dashl "${1#-l}" - set x "$@" "$lib" - shift - ;; - -L) - eat=1 - func_cl_dashL "$2" - ;; - -L*) - func_cl_dashL "${1#-L}" - ;; - -static) - shared=false - ;; - -Wl,*) - arg=${1#-Wl,} - save_ifs="$IFS"; IFS=',' - for flag in $arg; do - IFS="$save_ifs" - linker_opts="$linker_opts $flag" - done - IFS="$save_ifs" - ;; - -Xlinker) - eat=1 - linker_opts="$linker_opts $2" - ;; - -*) - set x "$@" "$1" - shift - ;; - *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) - func_file_conv "$1" - set x "$@" -Tp"$file" - shift - ;; - *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) - func_file_conv "$1" mingw - set x "$@" "$file" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift - done - if test -n "$linker_opts"; then - linker_opts="-link$linker_opts" - fi - exec "$@" $linker_opts - exit 1 -} - -eat= - -case $1 in - '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: compile [--help] [--version] PROGRAM [ARGS] - -Wrapper for compilers which do not understand '-c -o'. -Remove '-o dest.o' from ARGS, run PROGRAM with the remaining -arguments, and rename the output as expected. - -If you are trying to build a whole package this is not the -right script to run: please start by reading the file 'INSTALL'. - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "compile $scriptversion" - exit $? - ;; - cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) - func_cl_wrapper "$@" # Doesn't return... - ;; -esac - -ofile= -cfile= - -for arg -do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as 'compile cc -o foo foo.c'. - # So we strip '-o arg' only if arg is an object. - eat=1 - case $2 in - *.o | *.obj) - ofile=$2 - ;; - *) - set x "$@" -o "$2" - shift - ;; - esac - ;; - *.c) - cfile=$1 - set x "$@" "$1" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift -done - -if test -z "$ofile" || test -z "$cfile"; then - # If no '-o' option was seen then we might have been invoked from a - # pattern rule where we don't need one. That is ok -- this is a - # normal compilation that the losing compiler can handle. If no - # '.c' file was seen then we are probably linking. That is also - # ok. - exec "$@" -fi - -# Name of file we expect compiler to create. -cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` - -# Create the lock directory. -# Note: use '[/\\:.-]' here to ensure that we don't use the same name -# that we are using for the .o file. Also, base the name on the expected -# object file name, since that is what matters with a parallel build. -lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d -while true; do - if mkdir "$lockdir" >/dev/null 2>&1; then - break - fi - sleep 1 -done -# FIXME: race condition here if user kills between mkdir and trap. -trap "rmdir '$lockdir'; exit 1" 1 2 15 - -# Run the compile. -"$@" -ret=$? - -if test -f "$cofile"; then - test "$cofile" = "$ofile" || mv "$cofile" "$ofile" -elif test -f "${cofile}bj"; then - test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" -fi - -rmdir "$lockdir" -exit $ret - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru hitori-3.22.4/config.guess hitori-3.31.0/config.guess --- hitori-3.22.4/config.guess 2017-10-02 08:08:04.000000000 +0000 +++ hitori-3.31.0/config.guess 1970-01-01 00:00:00.000000000 +0000 @@ -1,1462 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright 1992-2016 Free Software Foundation, Inc. - -timestamp='2016-10-02' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, see . -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). -# -# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. -# -# You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess -# -# Please send patches to . - - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright 1992-2016 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -case "${UNAME_SYSTEM}" in -Linux|GNU|GNU/*) - # If the system lacks a compiler, then just pick glibc. - # We could probably try harder. - LIBC=gnu - - eval $set_cc_for_build - cat <<-EOF > $dummy.c - #include - #if defined(__UCLIBC__) - LIBC=uclibc - #elif defined(__dietlibc__) - LIBC=dietlibc - #else - LIBC=gnu - #endif - EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` - ;; -esac - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ - /sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || \ - echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - earmv*) - arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'` - endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'` - machine=${arch}${endian}-unknown - ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently (or will in the future) and ABI. - case "${UNAME_MACHINE_ARCH}" in - earm*) - os=netbsdelf - ;; - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ELF__ - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # Determine ABI tags. - case "${UNAME_MACHINE_ARCH}" in - earm*) - expr='s/^earmv[0-9]/-eabi/;s/eb$//' - abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"` - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}${abi}" - exit ;; - *:Bitrig:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; - *:LibertyBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-libertybsd${UNAME_RELEASE} - exit ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; - *:SolidBSD:*:*) - echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:Sortix:*:*) - echo ${UNAME_MACHINE}-unknown-sortix - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE=alpha ;; - "EV4.5 (21064)") - UNAME_MACHINE=alpha ;; - "LCA4 (21066/21068)") - UNAME_MACHINE=alpha ;; - "EV5 (21164)") - UNAME_MACHINE=alphaev5 ;; - "EV5.6 (21164A)") - UNAME_MACHINE=alphaev56 ;; - "EV5.6 (21164PC)") - UNAME_MACHINE=alphapca56 ;; - "EV5.7 (21164PC)") - UNAME_MACHINE=alphapca57 ;; - "EV6 (21264)") - UNAME_MACHINE=alphaev6 ;; - "EV6.7 (21264A)") - UNAME_MACHINE=alphaev67 ;; - "EV6.8CB (21264C)") - UNAME_MACHINE=alphaev68 ;; - "EV6.8AL (21264B)") - UNAME_MACHINE=alphaev68 ;; - "EV6.8CX (21264D)") - UNAME_MACHINE=alphaev68 ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE=alphaev69 ;; - "EV7 (21364)") - UNAME_MACHINE=alphaev7 ;; - "EV7.9 (21364A)") - UNAME_MACHINE=alphaev79 ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` - # Reset EXIT trap before exiting to avoid spurious non-zero exit code. - exitcode=$? - trap '' 0 - exit $exitcode ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm*:riscos:*:*|arm*:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - s390x:SunOS:*:*) - echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) - echo i386-pc-auroraux${UNAME_RELEASE} - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - eval $set_cc_for_build - SUN_ARCH=i386 - # If there is a compiler, see if it is configured for 64-bit objects. - # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. - # This test works for both compilers. - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then - if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - SUN_ARCH=x86_64 - fi - fi - echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[4567]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/lslpp ] ; then - IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | - awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 - 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH=hppa2.0n ;; - 64) HP_ARCH=hppa2.0w ;; - '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = hppa2.0w ] - then - eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | - grep -q __LP64__ - then - HP_ARCH=hppa2.0w - else - HP_ARCH=hppa64 - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` - FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:FreeBSD:*:*) - UNAME_PROCESSOR=`/usr/bin/uname -p` - case ${UNAME_PROCESSOR} in - amd64) - echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - *) - echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - esac - exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit ;; - *:MINGW64*:*) - echo ${UNAME_MACHINE}-pc-mingw64 - exit ;; - *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - *:MSYS*:*) - echo ${UNAME_MACHINE}-pc-msys - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit ;; - *:Interix*:*) - case ${UNAME_MACHINE} in - x86) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - authenticamd | genuineintel | EM64T) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; - IA64) - echo ia64-unknown-interix${UNAME_RELEASE} - exit ;; - esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - 8664:Windows_NT:*) - echo x86_64-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} - exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit ;; - aarch64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - aarch64_be:Linux:*:*) - UNAME_MACHINE=aarch64_be - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC=gnulibc1 ; fi - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - arc:Linux:*:* | arceb:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - arm*:Linux:*:*) - eval $set_cc_for_build - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - else - if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_PCS_VFP - then - echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi - else - echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf - fi - fi - exit ;; - avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - cris:Linux:*:*) - echo ${UNAME_MACHINE}-axis-linux-${LIBC} - exit ;; - crisv32:Linux:*:*) - echo ${UNAME_MACHINE}-axis-linux-${LIBC} - exit ;; - e2k:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - frv:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - hexagon:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - i*86:Linux:*:*) - echo ${UNAME_MACHINE}-pc-linux-${LIBC} - exit ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - k1om:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - mips:Linux:*:* | mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef ${UNAME_MACHINE} - #undef ${UNAME_MACHINE}el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=${UNAME_MACHINE}el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=${UNAME_MACHINE} - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } - ;; - mips64el:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - openrisc*:Linux:*:*) - echo or1k-unknown-linux-${LIBC} - exit ;; - or32:Linux:*:* | or1k*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - padre:Linux:*:*) - echo sparc-unknown-linux-${LIBC} - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-${LIBC} - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; - PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; - *) echo hppa-unknown-linux-${LIBC} ;; - esac - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-${LIBC} - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-${LIBC} - exit ;; - ppc64le:Linux:*:*) - echo powerpc64le-unknown-linux-${LIBC} - exit ;; - ppcle:Linux:*:*) - echo powerpcle-unknown-linux-${LIBC} - exit ;; - riscv32:Linux:*:* | riscv64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux-${LIBC} - exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - tile*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-${LIBC} - exit ;; - x86_64:Linux:*:*) - echo ${UNAME_MACHINE}-pc-linux-${LIBC} - exit ;; - xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} - exit ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. - # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configure will decide that - # this is a cross-build. - echo i586-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - NCR*:*:4.2:* | MPRAS*:*:4.2:*) - OS_REL='.3' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - BePC:Haiku:*:*) # Haiku running on Intel PC compatible. - echo i586-pc-haiku - exit ;; - x86_64:Haiku:*:*) - echo x86_64-unknown-haiku - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} - exit ;; - SX-ACE:SUPER-UX:*:*) - echo sxace-nec-superux${UNAME_RELEASE} - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - eval $set_cc_for_build - if test "$UNAME_PROCESSOR" = unknown ; then - UNAME_PROCESSOR=powerpc - fi - if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then - if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - case $UNAME_PROCESSOR in - i386) UNAME_PROCESSOR=x86_64 ;; - powerpc) UNAME_PROCESSOR=powerpc64 ;; - esac - fi - fi - elif test "$UNAME_PROCESSOR" = i386 ; then - # Avoid executing cc on OS X 10.9, as it ships with a stub - # that puts up a graphical alert prompting to install - # developer tools. Any system running Mac OS X 10.7 or - # later (Darwin 11 and later) is required to have a 64-bit - # processor. This is not true of the ARM version of Darwin - # that Apple uses in portable devices. - UNAME_PROCESSOR=x86_64 - fi - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = x86; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NEO-?:NONSTOP_KERNEL:*:*) - echo neo-tandem-nsk${UNAME_RELEASE} - exit ;; - NSE-*:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = 386; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'` - exit ;; - i*86:rdos:*:*) - echo ${UNAME_MACHINE}-pc-rdos - exit ;; - i*86:AROS:*:*) - echo ${UNAME_MACHINE}-pc-aros - exit ;; - x86_64:VMkernel:*:*) - echo ${UNAME_MACHINE}-unknown-esx - exit ;; - amd64:Isilon\ OneFS:*:*) - echo x86_64-unknown-onefs - exit ;; -esac - -cat >&2 </dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff -Nru hitori-3.22.4/config.h.in hitori-3.31.0/config.h.in --- hitori-3.22.4/config.h.in 2017-10-02 08:08:04.000000000 +0000 +++ hitori-3.31.0/config.h.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,92 +0,0 @@ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* Define if debugging is enabled */ -#undef DEBUG - -/* Define to 1 if translation of program messages to the user's native - language is requested. */ -#undef ENABLE_NLS - -/* Define to 1 if you have the `atexit' function. */ -#undef HAVE_ATEXIT - -/* Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the - CoreFoundation framework. */ -#undef HAVE_CFLOCALECOPYCURRENT - -/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in - the CoreFoundation framework. */ -#undef HAVE_CFPREFERENCESCOPYAPPVALUE - -/* Define if the GNU dcgettext() function is already present or preinstalled. - */ -#undef HAVE_DCGETTEXT - -/* Define to 1 if you have the header file. */ -#undef HAVE_DLFCN_H - -/* Define if the GNU gettext() function is already present or preinstalled. */ -#undef HAVE_GETTEXT - -/* Define if you have the iconv() function and it works. */ -#undef HAVE_ICONV - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Define to the sub-directory where libtool stores uninstalled libraries. */ -#undef LT_OBJDIR - -/* Define if debugging is disabled */ -#undef NDEBUG - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Version number of package */ -#undef VERSION diff -Nru hitori-3.22.4/config.rpath hitori-3.31.0/config.rpath --- hitori-3.22.4/config.rpath 2017-10-02 08:07:40.000000000 +0000 +++ hitori-3.31.0/config.rpath 1970-01-01 00:00:00.000000000 +0000 @@ -1,684 +0,0 @@ -#! /bin/sh -# Output a system dependent set of variables, describing how to set the -# run time search path of shared libraries in an executable. -# -# Copyright 1996-2016 Free Software Foundation, Inc. -# Taken from GNU libtool, 2001 -# Originally by Gordon Matzigkeit , 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. -# -# The first argument passed to this file is the canonical host specification, -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld -# should be set by the caller. -# -# The set of defined variables is at the end of this script. - -# Known limitations: -# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer -# than 256 bytes, otherwise the compiler driver will dump core. The only -# known workaround is to choose shorter directory names for the build -# directory and/or the installation directory. - -# All known linkers require a '.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -shrext=.so - -host="$1" -host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - -# Code taken from libtool.m4's _LT_CC_BASENAME. - -for cc_temp in $CC""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` - -# Code taken from libtool.m4's _LT_COMPILER_PIC. - -wl= -if test "$GCC" = yes; then - wl='-Wl,' -else - case "$host_os" in - aix*) - wl='-Wl,' - ;; - mingw* | cygwin* | pw32* | os2* | cegcc*) - ;; - hpux9* | hpux10* | hpux11*) - wl='-Wl,' - ;; - irix5* | irix6* | nonstopux*) - wl='-Wl,' - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - ecc*) - wl='-Wl,' - ;; - icc* | ifort*) - wl='-Wl,' - ;; - lf95*) - wl='-Wl,' - ;; - nagfor*) - wl='-Wl,-Wl,,' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - wl='-Wl,' - ;; - ccc*) - wl='-Wl,' - ;; - xl* | bgxl* | bgf* | mpixl*) - wl='-Wl,' - ;; - como) - wl='-lopt=' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) - wl= - ;; - *Sun\ C*) - wl='-Wl,' - ;; - esac - ;; - esac - ;; - newsos6) - ;; - *nto* | *qnx*) - ;; - osf3* | osf4* | osf5*) - wl='-Wl,' - ;; - rdos*) - ;; - solaris*) - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - wl='-Qoption ld ' - ;; - *) - wl='-Wl,' - ;; - esac - ;; - sunos4*) - wl='-Qoption ld ' - ;; - sysv4 | sysv4.2uw2* | sysv4.3*) - wl='-Wl,' - ;; - sysv4*MP*) - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - wl='-Wl,' - ;; - unicos*) - wl='-Wl,' - ;; - uts4*) - ;; - esac -fi - -# Code taken from libtool.m4's _LT_LINKER_SHLIBS. - -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no - -case "$host_os" in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - # Unlike libtool, we use -rpath here, not --rpath, since the documented - # option of GNU ld is called -rpath, not --rpath. - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - case "$host_os" in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - fi - ;; - amigaos*) - case "$host_cpu" in - powerpc) - ;; - m68k) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - cygwin* | mingw* | pw32* | cegcc*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - haiku*) - ;; - interix[3-9]*) - hardcode_direct=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - netbsd*) - ;; - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - else - ld_shlibs=no - fi - ;; - esac - ;; - sunos4*) - hardcode_direct=yes - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - esac - if test "$ld_shlibs" = no; then - hardcode_libdir_flag_spec= - fi -else - case "$host_os" in - aix3*) - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - else - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - fi - hardcode_direct=yes - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - fi - # Begin _LT_AC_SYS_LIBPATH_AIX. - echo 'int main () { return 0; }' > conftest.c - ${CC} ${LDFLAGS} conftest.c -o conftest - aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - fi - if test -z "$aix_libpath"; then - aix_libpath="/usr/lib:/lib" - fi - rm -f conftest.c conftest - # End _LT_AC_SYS_LIBPATH_AIX. - if test "$aix_use_runtimelinking" = yes; then - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - else - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - fi - fi - ;; - amigaos*) - case "$host_cpu" in - powerpc) - ;; - m68k) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - bsdi[45]*) - ;; - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - libext=lib - ;; - darwin* | rhapsody*) - hardcode_direct=no - if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then - : - else - ld_shlibs=no - fi - ;; - dgux*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - freebsd2.[01]*) - hardcode_direct=yes - hardcode_minus_L=yes - ;; - freebsd* | dragonfly*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - hpux9*) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - hpux10*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - hpux11*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - ;; - *) - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - irix5* | irix6* | nonstopux*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - netbsd*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - newsos6) - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - *nto* | *qnx*) - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - osf3*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - osf4* | osf5*) - if test "$GCC" = yes; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - # Both cc and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - solaris*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - sunos4*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - ;; - sysv4) - case $host_vendor in - sni) - hardcode_direct=yes # is this really true??? - ;; - siemens) - hardcode_direct=no - ;; - motorola) - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - ;; - sysv4.3*) - ;; - sysv4*MP*) - if test -d /usr/nec; then - ld_shlibs=yes - fi - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - ;; - sysv5* | sco3.2v5* | sco5v6*) - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator=':' - ;; - uts4*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - *) - ld_shlibs=no - ;; - esac -fi - -# Check dynamic linker characteristics -# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. -# Unlike libtool.m4, here we don't care about _all_ names of the library, but -# only about the one the linker finds when passed -lNAME. This is the last -# element of library_names_spec in libtool.m4, or possibly two of them if the -# linker has special search rules. -library_names_spec= # the last element of library_names_spec in libtool.m4 -libname_spec='lib$name' -case "$host_os" in - aix3*) - library_names_spec='$libname.a' - ;; - aix[4-9]*) - library_names_spec='$libname$shrext' - ;; - amigaos*) - case "$host_cpu" in - powerpc*) - library_names_spec='$libname$shrext' ;; - m68k) - library_names_spec='$libname.a' ;; - esac - ;; - beos*) - library_names_spec='$libname$shrext' - ;; - bsdi[45]*) - library_names_spec='$libname$shrext' - ;; - cygwin* | mingw* | pw32* | cegcc*) - shrext=.dll - library_names_spec='$libname.dll.a $libname.lib' - ;; - darwin* | rhapsody*) - shrext=.dylib - library_names_spec='$libname$shrext' - ;; - dgux*) - library_names_spec='$libname$shrext' - ;; - freebsd[23].*) - library_names_spec='$libname$shrext$versuffix' - ;; - freebsd* | dragonfly*) - library_names_spec='$libname$shrext' - ;; - gnu*) - library_names_spec='$libname$shrext' - ;; - haiku*) - library_names_spec='$libname$shrext' - ;; - hpux9* | hpux10* | hpux11*) - case $host_cpu in - ia64*) - shrext=.so - ;; - hppa*64*) - shrext=.sl - ;; - *) - shrext=.sl - ;; - esac - library_names_spec='$libname$shrext' - ;; - interix[3-9]*) - library_names_spec='$libname$shrext' - ;; - irix5* | irix6* | nonstopux*) - library_names_spec='$libname$shrext' - case "$host_os" in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; - *) libsuff= shlibsuff= ;; - esac - ;; - esac - ;; - linux*oldld* | linux*aout* | linux*coff*) - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - library_names_spec='$libname$shrext' - ;; - knetbsd*-gnu) - library_names_spec='$libname$shrext' - ;; - netbsd*) - library_names_spec='$libname$shrext' - ;; - newsos6) - library_names_spec='$libname$shrext' - ;; - *nto* | *qnx*) - library_names_spec='$libname$shrext' - ;; - openbsd*) - library_names_spec='$libname$shrext$versuffix' - ;; - os2*) - libname_spec='$name' - shrext=.dll - library_names_spec='$libname.a' - ;; - osf3* | osf4* | osf5*) - library_names_spec='$libname$shrext' - ;; - rdos*) - ;; - solaris*) - library_names_spec='$libname$shrext' - ;; - sunos4*) - library_names_spec='$libname$shrext$versuffix' - ;; - sysv4 | sysv4.3*) - library_names_spec='$libname$shrext' - ;; - sysv4*MP*) - library_names_spec='$libname$shrext' - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - library_names_spec='$libname$shrext' - ;; - tpf*) - library_names_spec='$libname$shrext' - ;; - uts4*) - library_names_spec='$libname$shrext' - ;; -esac - -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' -escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` -shlibext=`echo "$shrext" | sed -e 's,^\.,,'` -escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` - -LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). - - -# Please send patches to . -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright 1992-2016 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ - linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ - knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ - kopensolaris*-gnu* | cloudabi*-eabi* | \ - storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - android-linux) - os=-linux-android - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray | -microblaze*) - os= - basic_machine=$1 - ;; - -bluegene*) - os=-cnk - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco6) - os=-sco5v6 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*178) - os=-lynxos178 - ;; - -lynx*5) - os=-lynxos5 - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | aarch64 | aarch64_be \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arceb \ - | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ - | avr | avr32 \ - | ba \ - | be32 | be64 \ - | bfin \ - | c4x | c8051 | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | e2k | epiphany \ - | fido | fr30 | frv | ft32 \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | hexagon \ - | i370 | i860 | i960 | ia64 \ - | ip2k | iq2000 \ - | k1om \ - | le32 | le64 \ - | lm32 \ - | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64octeon | mips64octeonel \ - | mips64orion | mips64orionel \ - | mips64r5900 | mips64r5900el \ - | mips64vr | mips64vrel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa32r6 | mipsisa32r6el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64r6 | mipsisa64r6el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipsr5900 | mipsr5900el \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | moxie \ - | mt \ - | msp430 \ - | nds32 | nds32le | nds32be \ - | nios | nios2 | nios2eb | nios2el \ - | ns16k | ns32k \ - | open8 | or1k | or1knd | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle \ - | pyramid \ - | riscv32 | riscv64 \ - | rl78 | rx \ - | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu \ - | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ - | ubicom32 \ - | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ - | visium \ - | we32k \ - | x86 | xc16x | xstormy16 | xtensa \ - | z8k | z80) - basic_machine=$basic_machine-unknown - ;; - c54x) - basic_machine=tic54x-unknown - ;; - c55x) - basic_machine=tic55x-unknown - ;; - c6x) - basic_machine=tic6x-unknown - ;; - leon|leon[3-9]) - basic_machine=sparc-$basic_machine - ;; - m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - ms1) - basic_machine=mt-unknown - ;; - - strongarm | thumb | xscale) - basic_machine=arm-unknown - ;; - xgate) - basic_machine=$basic_machine-unknown - os=-none - ;; - xscaleeb) - basic_machine=armeb-unknown - ;; - - xscaleel) - basic_machine=armel-unknown - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | aarch64-* | aarch64_be-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* | avr32-* \ - | ba-* \ - | be32-* | be64-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* \ - | c8051-* | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | e2k-* | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | hexagon-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* | iq2000-* \ - | k1om-* \ - | le32-* | le64-* \ - | lm32-* \ - | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ - | microblaze-* | microblazeel-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64octeon-* | mips64octeonel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64r5900-* | mips64r5900el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa32r6-* | mipsisa32r6el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64r6-* | mipsisa64r6el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipsr5900-* | mipsr5900el-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | mt-* \ - | msp430-* \ - | nds32-* | nds32le-* | nds32be-* \ - | nios-* | nios2-* | nios2eb-* | nios2el-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | open8-* \ - | or1k*-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ - | pyramid-* \ - | riscv32-* | riscv64-* \ - | rl78-* | romp-* | rs6000-* | rx-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ - | tahoe-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tile*-* \ - | tron-* \ - | ubicom32-* \ - | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ - | vax-* \ - | visium-* \ - | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* \ - | xstormy16-* | xtensa*-* \ - | ymp-* \ - | z8k-* | z80-*) - ;; - # Recognize the basic CPU types without company name, with glob match. - xtensa*) - basic_machine=$basic_machine-unknown - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aros) - basic_machine=i386-pc - os=-aros - ;; - asmjs) - basic_machine=asmjs-unknown - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=-linux - ;; - blackfin-*) - basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - bluegene*) - basic_machine=powerpc-ibm - os=-cnk - ;; - c54x-*) - basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c55x-*) - basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c6x-*) - basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - cegcc) - basic_machine=arm-unknown - os=-cegcc - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16 | cr16-*) - basic_machine=cr16-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dicos) - basic_machine=i686-pc - os=-dicos - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - e500v[12]) - basic_machine=powerpc-unknown - os=$os"spe" - ;; - e500v[12]-*) - basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - os=$os"spe" - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - leon-*|leon[3-9]-*) - basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'` - ;; - m68knommu) - basic_machine=m68k-unknown - os=-linux - ;; - m68knommu-*) - basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - microblaze*) - basic_machine=microblaze-xilinx - ;; - mingw64) - basic_machine=x86_64-pc - os=-mingw64 - ;; - mingw32) - basic_machine=i686-pc - os=-mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=-mingw32ce - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - moxiebox) - basic_machine=moxie-unknown - os=-moxiebox - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - ms1-*) - basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` - ;; - msys) - basic_machine=i686-pc - os=-msys - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - nacl) - basic_machine=le32-unknown - os=-nacl - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - neo-tandem) - basic_machine=neo-tandem - ;; - nse-tandem) - basic_machine=nse-tandem - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - parisc) - basic_machine=hppa-unknown - os=-linux - ;; - parisc-*) - basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pc98) - basic_machine=i386-pc - ;; - pc98-*) - basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc | ppcbe) basic_machine=powerpc-unknown - ;; - ppc-* | ppcbe-*) - basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-* | ppc64p7-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rdos | rdos64) - basic_machine=x86_64-pc - os=-rdos - ;; - rdos32) - basic_machine=i386-pc - os=-rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sde) - basic_machine=mipsisa32-sde - os=-elf - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sh5el) - basic_machine=sh5le-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - strongarm-* | thumb-*) - basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tile*) - basic_machine=$basic_machine-unknown - os=-linux-gnu - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - xscale-* | xscalee[bl]-*) - basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - z80-*-coff) - basic_machine=z80-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -auroraux) - os=-auroraux - ;; - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ - | -sym* | -kopensolaris* | -plan9* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* | -cloudabi* | -sortix* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* | -cegcc* \ - | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ - | -linux-newlib* | -linux-musl* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \ - | -onefs* | -tirtos* | -phoenix*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -aros*) - os=-aros - ;; - -zvmoe) - os=-zvmoe - ;; - -dicos*) - os=-dicos - ;; - -nacl*) - ;; - -ios) - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - score-*) - os=-elf - ;; - spu-*) - os=-elf - ;; - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - c8051-*) - os=-elf - ;; - hexagon-*) - os=-elf - ;; - tic54x-*) - os=-coff - ;; - tic55x-*) - os=-coff - ;; - tic6x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - ;; - m68*-cisco) - os=-aout - ;; - mep-*) - os=-elf - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-haiku) - os=-haiku - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -cnk*|-aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff -Nru hitori-3.22.4/configure hitori-3.31.0/configure --- hitori-3.22.4/configure 2017-10-02 08:08:03.000000000 +0000 +++ hitori-3.31.0/configure 1970-01-01 00:00:00.000000000 +0000 @@ -1,19109 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for Hitori 3.22.4. -# -# Report bugs to . -# -# -# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Use a proper internal environment variable to ensure we don't fall - # into an infinite loop, continuously re-executing ourselves. - if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then - _as_can_reexec=no; export _as_can_reexec; - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -as_fn_exit 255 - fi - # We don't want this to propagate to other subprocesses. - { _as_can_reexec=; unset _as_can_reexec;} -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1 -test -x / || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 - - test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ - || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - export CONFIG_SHELL - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -exit 255 -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: https://bugzilla.gnome.org/enter_bug.cgi?product=hitori -$0: about your system, including any error possibly output -$0: before this message. Then install a modern shell, or -$0: manually run the script under such a shell if you do -$0: have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # If we had to re-execute with $CONFIG_SHELL, we're ensured to have - # already done that, so ensure we don't try to do so again and fall - # in an infinite loop. This has already happened in practice. - _as_can_reexec=no; export _as_can_reexec - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - -SHELL=${CONFIG_SHELL-/bin/sh} - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='Hitori' -PACKAGE_TARNAME='hitori' -PACKAGE_VERSION='3.22.4' -PACKAGE_STRING='Hitori 3.22.4' -PACKAGE_BUGREPORT='https://bugzilla.gnome.org/enter_bug.cgi?product=hitori' -PACKAGE_URL='https://wiki.gnome.org/Apps/Hitori' - -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -gt_needs= -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIBOBJS -DESKTOP_FILE_VALIDATE -GTK_PREFIX -GENERAL_LIBS -GENERAL_CFLAGS -GENERATE_CHANGELOG_RULES -GIT -APPSTREAM_XML_RULES -appstreamxmldir -APPSTREAM_UTIL -YELP_HELP_RULES -XMLLINT -ITSTOOL -HELP_DIR -YELP_LC_DIST -YELP_LC_MEDIA_LINKS -GSETTINGS_RULES -GLIB_COMPILE_SCHEMAS -gsettingsschemadir -PKG_CONFIG_LIBDIR -PKG_CONFIG_PATH -PKG_CONFIG -GSETTINGS_DISABLE_SCHEMAS_COMPILE -POSUB -LTLIBINTL -LIBINTL -INTLLIBS -LTLIBICONV -LIBICONV -INTL_MACOSX_LIBS -XGETTEXT_EXTRA_OPTIONS -MSGMERGE -XGETTEXT_015 -XGETTEXT -GMSGFMT_015 -MSGFMT_015 -GMSGFMT -MSGFMT -GETTEXT_MACRO_VERSION -USE_NLS -GLIB_COMPILE_RESOURCES -CODE_COVERAGE_RULES -CODE_COVERAGE_LDFLAGS -CODE_COVERAGE_LIBS -CODE_COVERAGE_CXXFLAGS -CODE_COVERAGE_CFLAGS -CODE_COVERAGE_CPPFLAGS -GENHTML -LCOV -GCOV -CODE_COVERAGE_ENABLED -CODE_COVERAGE_ENABLED_FALSE -CODE_COVERAGE_ENABLED_TRUE -WARN_SCANNERFLAGS -WARN_LDFLAGS -WARN_CFLAGS -LT_SYS_LIBRARY_PATH -OTOOL64 -OTOOL -LIPO -NMEDIT -DSYMUTIL -MANIFEST_TOOL -RANLIB -ac_ct_AR -AR -DLLTOOL -OBJDUMP -LN_S -NM -ac_ct_DUMPBIN -DUMPBIN -LD -FGREP -EGREP -GREP -SED -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -LIBTOOL -CPP -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -am__nodep -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -MAINT -MAINTAINER_MODE_FALSE -MAINTAINER_MODE_TRUE -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -AM_DEFAULT_V -AM_V -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_silent_rules -enable_maintainer_mode -enable_debug -enable_dependency_tracking -enable_shared -enable_static -with_pic -enable_fast_install -with_aix_soname -with_gnu_ld -with_sysroot -enable_libtool_lock -enable_compile_warnings -enable_Werror -with_gcov -enable_code_coverage -enable_nls -enable_rpath -with_libiconv_prefix -with_libintl_prefix -enable_schemas_compile -with_help_dir -enable_appstream_util -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP -LT_SYS_LIBRARY_PATH -PKG_CONFIG -PKG_CONFIG_PATH -PKG_CONFIG_LIBDIR -ITSTOOL -XMLLINT -GENERAL_CFLAGS -GENERAL_LIBS -GTK_PREFIX' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures Hitori 3.22.4 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/hitori] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of Hitori 3.22.4:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-silent-rules less verbose build output (undo: "make V=1") - --disable-silent-rules verbose build output (undo: "make V=0") - --disable-maintainer-mode - disable make rules and dependencies not useful (and - sometimes confusing) to the casual installer - --enable-debug=[yes/info/profile/no] - compile with debugging - --enable-dependency-tracking - do not reject slow dependency extractors - --disable-dependency-tracking - speeds up one-time build - --enable-shared[=PKGS] build shared libraries [default=yes] - --enable-static[=PKGS] build static libraries [default=yes] - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --disable-libtool-lock avoid locking (might break parallel builds) - --enable-compile-warnings=[no/yes/error] - Enable compiler warnings and errors - --disable-Werror Unconditionally make all compiler warnings non-fatal - --enable-code-coverage Whether to enable code coverage support - --disable-nls do not use Native Language Support - --disable-rpath do not hardcode runtime library paths - --disable-schemas-compile - Disable regeneration of gschemas.compiled on install - --disable-appstream-util - Disable validating AppData XML files during check - phase - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use - both] - --with-aix-soname=aix|svr4|both - shared library versioning (aka "SONAME") variant to - provide on AIX, [default=aix]. - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-sysroot[=DIR] Search for dependent libraries within DIR (or the - compiler's sysroot if not specified). - --with-gcov=GCOV use given GCOV for coverage (GCOV=gcov). - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib - --without-libiconv-prefix don't search for libiconv in includedir and libdir - --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib - --without-libintl-prefix don't search for libintl in includedir and libdir - --with-help-dir=DIR path where help files are installed - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CPP C preprocessor - LT_SYS_LIBRARY_PATH - User-defined run-time library search path. - PKG_CONFIG path to pkg-config utility - PKG_CONFIG_PATH - directories to add to pkg-config's search path - PKG_CONFIG_LIBDIR - path overriding pkg-config's built-in search path - ITSTOOL Path to the `itstool` command - XMLLINT Path to the `xmllint` command - GENERAL_CFLAGS - C compiler flags for GENERAL, overriding pkg-config - GENERAL_LIBS - linker flags for GENERAL, overriding pkg-config - GTK_PREFIX value of prefix for gtk+-3.0, overriding pkg-config - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -Hitori home page: . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -Hitori configure 3.22.4 -generated by GNU Autoconf 2.69 - -Copyright (C) 2012 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - test -x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by Hitori $as_me 3.22.4, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -gt_needs="$gt_needs " -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - # $is_release = (.git directory does not exist) - if test -d ${srcdir}/.git; then : - ax_is_release=no -else - ax_is_release=yes -fi - - - -am__api_version='1.15' - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken - alias in your environment" "$LINENO" 5 - fi - if test "$2" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi - -rm -f conftest.file - -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# Expand $ac_aux_dir to an absolute path. -am_aux_dir=`cd "$ac_aux_dir" && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=1;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='hitori' - VERSION='3.22.4' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -mkdir_p='$(MKDIR_P)' - -# We need awk for the "check" target (and possibly the TAP driver). The -# system "awk" is bad on some platforms. -# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AMTAR='$${TAR-tar}' - - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar pax cpio none' - -am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' - - - - - - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 - fi -fi - -ac_config_headers="$ac_config_headers config.h" - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 -$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } - # Check whether --enable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then : - enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval -else - USE_MAINTAINER_MODE=yes -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 -$as_echo "$USE_MAINTAINER_MODE" >&6; } - if test $USE_MAINTAINER_MODE = yes; then - MAINTAINER_MODE_TRUE= - MAINTAINER_MODE_FALSE='#' -else - MAINTAINER_MODE_TRUE='#' - MAINTAINER_MODE_FALSE= -fi - - MAINT=$MAINTAINER_MODE_TRUE - - - -# Options - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable debugging" >&5 -$as_echo_n "checking whether to enable debugging... " >&6; } - - ax_enable_debug_default=yes - ax_enable_debug_is_release=$ax_is_release - - # If this is a release, override the default. - if test "$ax_enable_debug_is_release" = "yes"; then : - ax_enable_debug_default="no" -fi - - - - - # Check whether --enable-debug was given. -if test "${enable_debug+set}" = set; then : - enableval=$enable_debug; -else - enable_debug=$ax_enable_debug_default -fi - - - # empty mean debug yes - if test "x$enable_debug" = "x"; then : - enable_debug="yes" -fi - - # case of debug - case $enable_debug in #( - yes) : - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - CFLAGS="${CFLAGS} -g -O0" - CXXFLAGS="${CXXFLAGS} -g -O0" - FFLAGS="${FFLAGS} -g -O0" - FCFLAGS="${FCFLAGS} -g -O0" - OBJCFLAGS="${OBJCFLAGS} -g -O0" - ;; #( - info) : - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: info" >&5 -$as_echo "info" >&6; } - CFLAGS="${CFLAGS} -g" - CXXFLAGS="${CXXFLAGS} -g" - FFLAGS="${FFLAGS} -g" - FCFLAGS="${FCFLAGS} -g" - OBJCFLAGS="${OBJCFLAGS} -g" - ;; #( - profile) : - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: profile" >&5 -$as_echo "profile" >&6; } - CFLAGS="${CFLAGS} -g -pg" - CXXFLAGS="${CXXFLAGS} -g -pg" - FFLAGS="${FFLAGS} -g -pg" - FCFLAGS="${FCFLAGS} -g -pg" - OBJCFLAGS="${OBJCFLAGS} -g -pg" - LDFLAGS="${LDFLAGS} -pg" - ;; #( - *) : - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - if test "x${CFLAGS+set}" != "xset"; then : - CFLAGS="" -fi - if test "x${CXXFLAGS+set}" != "xset"; then : - CXXFLAGS="" -fi - if test "x${FFLAGS+set}" != "xset"; then : - FFLAGS="" -fi - if test "x${FCFLAGS+set}" != "xset"; then : - FCFLAGS="" -fi - if test "x${OBJCFLAGS+set}" != "xset"; then : - OBJCFLAGS="" -fi - ;; -esac - - if test "x$enable_debug" = "xyes"; then : - -$as_echo "#define DEBUG /**/" >>confdefs.h - -else - -$as_echo "#define NDEBUG /**/" >>confdefs.h - -fi - ax_enable_debug=$enable_debug - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 -$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } -if ${am_cv_prog_cc_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 - ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 -$as_echo "$am_cv_prog_cc_c_o" >&6; } -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -case `pwd` in - *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.4.6' -macro_revision='2.4.6' - - - - - - - - - - - - - -ltmain=$ac_aux_dir/ltmain.sh - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -$as_echo_n "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case $ECHO in - printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -$as_echo "printf" >&6; } ;; - print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -$as_echo "print -r" >&6; } ;; - *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -$as_echo "cat" >&6; } ;; -esac - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if ${ac_cv_path_SED+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_SED" || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi -else - ac_cv_path_SED=$SED -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -$as_echo "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed - -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_GREP" || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP" || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 -$as_echo_n "checking for fgrep... " >&6; } -if ${ac_cv_path_FGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 - then ac_cv_path_FGREP="$GREP -F" - else - if test -z "$FGREP"; then - ac_path_FGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_FGREP" || continue -# Check for GNU ac_path_FGREP and select it if it is found. - # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in -*GNU*) - ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'FGREP' >> "conftest.nl" - "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_FGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_FGREP="$ac_path_FGREP" - ac_path_FGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_FGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_FGREP"; then - as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_FGREP=$FGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 -$as_echo "$ac_cv_path_FGREP" >&6; } - FGREP="$ac_cv_path_FGREP" - - -test -z "$GREP" && GREP=grep - - - - - - - - - - - - - - - - - - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -ac_prog=ld -if test yes = "$GCC"; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return, which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD=$ac_prog - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test yes = "$with_gnu_ld"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${lt_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD=$ac_dir/$ac_prog - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 -$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if ${lt_cv_path_NM+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM=$NM -else - lt_nm_to_check=${ac_tool_prefix}nm - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/$lt_tmp_nm - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the 'sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty - case $build_os in - mingw*) lt_bad_file=conftest.nm/nofile ;; - *) lt_bad_file=/dev/null ;; - esac - case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in - *$lt_bad_file* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break 2 - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break 2 - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS=$lt_save_ifs - done - : ${lt_cv_path_NM=no} -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 -$as_echo "$lt_cv_path_NM" >&6; } -if test no != "$lt_cv_path_NM"; then - NM=$lt_cv_path_NM -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - if test -n "$ac_tool_prefix"; then - for ac_prog in dumpbin "link -dump" - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DUMPBIN"; then - ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DUMPBIN=$ac_cv_prog_DUMPBIN -if test -n "$DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 -$as_echo "$DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$DUMPBIN" && break - done -fi -if test -z "$DUMPBIN"; then - ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in dumpbin "link -dump" -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DUMPBIN"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN -if test -n "$ac_ct_DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 -$as_echo "$ac_ct_DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_DUMPBIN" && break -done - - if test "x$ac_ct_DUMPBIN" = x; then - DUMPBIN=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DUMPBIN=$ac_ct_DUMPBIN - fi -fi - - case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols -headers" - ;; - *) - DUMPBIN=: - ;; - esac - fi - - if test : != "$DUMPBIN"; then - NM=$DUMPBIN - fi -fi -test -z "$NM" && NM=nm - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 -$as_echo_n "checking the name lister ($NM) interface... " >&6; } -if ${lt_cv_nm_interface+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 -$as_echo "$lt_cv_nm_interface" >&6; } - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } -fi - -# find the maximum length of command line arguments -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 -$as_echo_n "checking the maximum length of command line arguments... " >&6; } -if ${lt_cv_sys_max_cmd_len+:} false; then : - $as_echo_n "(cached) " >&6 -else - i=0 - teststring=ABCD - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - os2*) - # The test takes a long time on OS/2. - lt_cv_sys_max_cmd_len=8192 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len" && \ - test undefined != "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test X`env echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test 17 != "$i" # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac - -fi - -if test -n "$lt_cv_sys_max_cmd_len"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 -$as_echo "$lt_cv_sys_max_cmd_len" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 -$as_echo "none" >&6; } -fi -max_cmd_len=$lt_cv_sys_max_cmd_len - - - - - - -: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi - - - - - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 -$as_echo_n "checking how to convert $build file names to $host format... " >&6; } -if ${lt_cv_to_host_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac - -fi - -to_host_file_cmd=$lt_cv_to_host_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 -$as_echo "$lt_cv_to_host_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 -$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } -if ${lt_cv_to_tool_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - #assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac - -fi - -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 -$as_echo "$lt_cv_to_tool_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 -$as_echo_n "checking for $LD option to reload object files... " >&6; } -if ${lt_cv_ld_reload_flag+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 -$as_echo "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - if test yes != "$GCC"; then - reload_cmds=false - fi - ;; - darwin*) - if test yes = "$GCC"; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -$as_echo "$OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -$as_echo "$ac_ct_OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 -$as_echo_n "checking how to recognize dependent libraries... " >&6; } -if ${lt_cv_deplibs_check_method+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# 'unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# that responds to the $file_magic_cmd with a given extended regex. -# If you have 'file' or equivalent on your system and you're not sure -# whether 'pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd* | bitrig*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -os2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 -$as_echo "$lt_cv_deplibs_check_method" >&6; } - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - - - - - - - - - - - - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -$as_echo "$DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -$as_echo "$ac_ct_DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - -test -z "$DLLTOOL" && DLLTOOL=dlltool - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 -$as_echo_n "checking how to associate runtime and link libraries... " >&6; } -if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh; - # decide which one to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd=$ECHO - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 -$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - - - - - - - - -if test -n "$ac_tool_prefix"; then - for ac_prog in ar - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AR" && break - done -fi -if test -z "$AR"; then - ac_ct_AR=$AR - for ac_prog in ar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_AR="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_AR" && break -done - - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -fi - -: ${AR=ar} -: ${AR_FLAGS=cru} - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 -$as_echo_n "checking for archiver @FILE support... " >&6; } -if ${lt_cv_ar_at_file+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ar_at_file=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test 0 -eq "$ac_status"; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test 0 -ne "$ac_status"; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 -$as_echo "$lt_cv_ar_at_file" >&6; } - -if test no = "$lt_cv_ar_at_file"; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -test -z "$STRIP" && STRIP=: - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -test -z "$RANLIB" && RANLIB=: - - - - - - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - bitrig* | openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" -fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 -$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if ${lt_cv_sys_global_symbol_pipe+:} false; then : - $as_echo_n "(cached) " >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[ABCDGISTW]' - ;; -hpux*) - if test ia64 = "$host_cpu"; then - symcode='[ABCDEGRST]' - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Gets list of data symbols to import. - lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" - # Adjust the below global symbol transforms to fixup imported variables. - lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" - lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" - lt_c_name_lib_hook="\ - -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ - -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" -else - # Disable hooks by default. - lt_cv_sys_global_symbol_to_import= - lt_cdecl_hook= - lt_c_name_hook= - lt_c_name_lib_hook= -fi - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n"\ -$lt_cdecl_hook\ -" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ -$lt_c_name_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" - -# Transform an extracted symbol line into symbol name with lib prefix and -# symbol address. -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ -$lt_c_name_lib_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function, - # D for any global variable and I for any imported variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK '"\ -" {last_section=section; section=\$ 3};"\ -" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ -" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ -" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ -" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ -" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE -/* DATA imports from DLLs on WIN32 can't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined __osf__ -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -LT_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS=conftstm.$ac_objext - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest$ac_exeext; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test yes = "$pipe_works"; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 -$as_echo "failed" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -fi - -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 -$as_echo_n "checking for sysroot... " >&6; } - -# Check whether --with-sysroot was given. -if test "${with_sysroot+set}" = set; then : - withval=$with_sysroot; -else - with_sysroot=no -fi - - -lt_sysroot= -case $with_sysroot in #( - yes) - if test yes = "$GCC"; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 -$as_echo "$with_sysroot" >&6; } - as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 - ;; -esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 -$as_echo "${lt_sysroot:-no}" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 -$as_echo_n "checking for a working dd... " >&6; } -if ${ac_cv_path_lt_DD+:} false; then : - $as_echo_n "(cached) " >&6 -else - printf 0123456789abcdef0123456789abcdef >conftest.i -cat conftest.i conftest.i >conftest2.i -: ${lt_DD:=$DD} -if test -z "$lt_DD"; then - ac_path_lt_DD_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in dd; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_lt_DD" || continue -if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: -fi - $ac_path_lt_DD_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_lt_DD"; then - : - fi -else - ac_cv_path_lt_DD=$lt_DD -fi - -rm -f conftest.i conftest2.i conftest.out -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 -$as_echo "$ac_cv_path_lt_DD" >&6; } - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 -$as_echo_n "checking how to truncate binary pipes... " >&6; } -if ${lt_cv_truncate_bin+:} false; then : - $as_echo_n "(cached) " >&6 -else - printf 0123456789abcdef0123456789abcdef >conftest.i -cat conftest.i conftest.i >conftest2.i -lt_cv_truncate_bin= -if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" -fi -rm -f conftest.i conftest2.i conftest.out -test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 -$as_echo "$lt_cv_truncate_bin" >&6; } - - - - - - - -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -func_cc_basename () -{ - for cc_temp in $*""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac - done - func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -} - -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then : - enableval=$enable_libtool_lock; -fi - -test no = "$enable_libtool_lock" || enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out what ABI is being produced by ac_compile, and set mode - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE=32 - ;; - *ELF-64*) - HPUX_IA64_MODE=64 - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - if test yes = "$lt_cv_prog_gnu_ld"; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -mips64*-*linux*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - emul=elf - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - emul="${emul}32" - ;; - *64-bit*) - emul="${emul}64" - ;; - esac - case `/usr/bin/file conftest.$ac_objext` in - *MSB*) - emul="${emul}btsmip" - ;; - *LSB*) - emul="${emul}ltsmip" - ;; - esac - case `/usr/bin/file conftest.$ac_objext` in - *N32*) - emul="${emul}n32" - ;; - esac - LD="${LD-ld} -m $emul" - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. Note that the listed cases only cover the - # situations where additional linker options are needed (such as when - # doing 32-bit compilation for a host where ld defaults to 64-bit, or - # vice versa); the common cases where no linker options are needed do - # not appear in the list. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - case `/usr/bin/file conftest.o` in - *x86-64*) - LD="${LD-ld} -m elf32_x86_64" - ;; - *) - LD="${LD-ld} -m elf_i386" - ;; - esac - ;; - powerpc64le-*linux*) - LD="${LD-ld} -m elf32lppclinux" - ;; - powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - powerpcle-*linux*) - LD="${LD-ld} -m elf64lppc" - ;; - powerpc-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS=$CFLAGS - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 -$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if ${lt_cv_cc_needs_belf+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_cc_needs_belf=yes -else - lt_cv_cc_needs_belf=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 -$as_echo "$lt_cv_cc_needs_belf" >&6; } - if test yes != "$lt_cv_cc_needs_belf"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS=$SAVE_CFLAGS - fi - ;; -*-*solaris*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) - case $host in - i?86-*-solaris*|x86_64-*-solaris*) - LD="${LD-ld} -m elf_x86_64" - ;; - sparc*-*-solaris*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - # GNU ld 2.21 introduced _sol2 emulations. Use them if available. - if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD=${LD-ld}_sol2 - fi - ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks=$enable_libtool_lock - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. -set dummy ${ac_tool_prefix}mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$MANIFEST_TOOL"; then - ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL -if test -n "$MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 -$as_echo "$MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_MANIFEST_TOOL"; then - ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL - # Extract the first word of "mt", so it can be a program name with args. -set dummy mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_MANIFEST_TOOL"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL -if test -n "$ac_ct_MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 -$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_MANIFEST_TOOL" = x; then - MANIFEST_TOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL - fi -else - MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" -fi - -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 -$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } -if ${lt_cv_path_mainfest_tool+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&5 - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 -$as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test yes != "$lt_cv_path_mainfest_tool"; then - MANIFEST_TOOL=: -fi - - - - - - - case $host_os in - rhapsody* | darwin*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -$as_echo "$DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 -$as_echo "$ac_ct_DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DSYMUTIL=$ac_ct_DSYMUTIL - fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 -$as_echo "$NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 -$as_echo "$ac_ct_NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$LIPO"; then - ac_cv_prog_LIPO="$LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -LIPO=$ac_cv_prog_LIPO -if test -n "$LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 -$as_echo "$LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. -set dummy lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_LIPO"; then - ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_LIPO="lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -if test -n "$ac_ct_LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 -$as_echo "$ac_ct_LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_LIPO" = x; then - LIPO=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - LIPO=$ac_ct_LIPO - fi -else - LIPO="$ac_cv_prog_LIPO" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL"; then - ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL=$ac_cv_prog_OTOOL -if test -n "$OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -$as_echo "$OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL"; then - ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OTOOL="otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -if test -n "$ac_ct_OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 -$as_echo "$ac_ct_OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL" = x; then - OTOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL=$ac_ct_OTOOL - fi -else - OTOOL="$ac_cv_prog_OTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL64"; then - ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL64=$ac_cv_prog_OTOOL64 -if test -n "$OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 -$as_echo "$OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. -set dummy otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL64"; then - ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -if test -n "$ac_ct_OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 -$as_echo "$ac_ct_OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL64" = x; then - OTOOL64=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL64=$ac_ct_OTOOL64 - fi -else - OTOOL64="$ac_cv_prog_OTOOL64" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 -$as_echo_n "checking for -single_module linker flag... " >&6; } -if ${lt_cv_apple_cc_single_mod+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_apple_cc_single_mod=no - if test -z "$LT_MULTI_MODULE"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - # If there is a non-empty error log, and "single_module" - # appears in it, assume the flag caused a linker warning - if test -s conftest.err && $GREP single_module conftest.err; then - cat conftest.err >&5 - # Otherwise, if the output was created with a 0 exit code from - # the compiler, it worked. - elif test -f libconftest.dylib && test 0 = "$_lt_result"; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 -$as_echo "$lt_cv_apple_cc_single_mod" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 -$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if ${lt_cv_ld_exported_symbols_list+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_ld_exported_symbols_list=yes -else - lt_cv_ld_exported_symbols_list=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 -$as_echo_n "checking for -force_load linker flag... " >&6; } -if ${lt_cv_ld_force_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR cru libconftest.a conftest.o" >&5 - $AR cru libconftest.a conftest.o 2>&5 - echo "$RANLIB libconftest.a" >&5 - $RANLIB libconftest.a 2>&5 - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -s conftest.err && $GREP force_load conftest.err; then - cat conftest.err >&5 - elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&5 - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 -$as_echo "$lt_cv_ld_force_load" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; - 10.[012][,.]*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test yes = "$lt_cv_apple_cc_single_mod"; then - _lt_dar_single_mod='$single_module' - fi - if test yes = "$lt_cv_ld_exported_symbols_list"; then - _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' - fi - if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac - -# func_munge_path_list VARIABLE PATH -# ----------------------------------- -# VARIABLE is name of variable containing _space_ separated list of -# directories to be munged by the contents of PATH, which is string -# having a format: -# "DIR[:DIR]:" -# string "DIR[ DIR]" will be prepended to VARIABLE -# ":DIR[:DIR]" -# string "DIR[ DIR]" will be appended to VARIABLE -# "DIRP[:DIRP]::[DIRA:]DIRA" -# string "DIRP[ DIRP]" will be prepended to VARIABLE and string -# "DIRA[ DIRA]" will be appended to VARIABLE -# "DIR[:DIR]" -# VARIABLE will be replaced by "DIR[ DIR]" -func_munge_path_list () -{ - case x$2 in - x) - ;; - *:) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" - ;; - x:*) - eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" - ;; - *::*) - eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" - eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" - ;; - *) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" - ;; - esac -} - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in dlfcn.h -do : - ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -" -if test "x$ac_cv_header_dlfcn_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_DLFCN_H 1 -_ACEOF - -fi - -done - - - - - -# Set options - - - - enable_dlopen=no - - - enable_win32_dll=no - - - # Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then : - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - enable_shared=yes -fi - - - - - - - - - - # Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - enable_static=yes -fi - - - - - - - - - - -# Check whether --with-pic was given. -if test "${with_pic+set}" = set; then : - withval=$with_pic; lt_p=${PACKAGE-default} - case $withval in - yes|no) pic_mode=$withval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for lt_pkg in $withval; do - IFS=$lt_save_ifs - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - pic_mode=default -fi - - - - - - - - - # Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then : - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - enable_fast_install=yes -fi - - - - - - - - - shared_archive_member_spec= -case $host,$enable_shared in -power*-*-aix[5-9]*,yes) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 -$as_echo_n "checking which variant of shared library versioning to provide... " >&6; } - -# Check whether --with-aix-soname was given. -if test "${with_aix_soname+set}" = set; then : - withval=$with_aix_soname; case $withval in - aix|svr4|both) - ;; - *) - as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 - ;; - esac - lt_cv_with_aix_soname=$with_aix_soname -else - if ${lt_cv_with_aix_soname+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_with_aix_soname=aix -fi - - with_aix_soname=$lt_cv_with_aix_soname -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 -$as_echo "$with_aix_soname" >&6; } - if test aix != "$with_aix_soname"; then - # For the AIX way of multilib, we name the shared archive member - # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', - # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. - # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, - # the AIX toolchain works better with OBJECT_MODE set (default 32). - if test 64 = "${OBJECT_MODE-32}"; then - shared_archive_member_spec=shr_64 - else - shared_archive_member_spec=shr - fi - fi - ;; -*) - with_aix_soname=aix - ;; -esac - - - - - - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS=$ltmain - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -test -z "$LN_S" && LN_S="ln -s" - - - - - - - - - - - - - - -if test -n "${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 -$as_echo_n "checking for objdir... " >&6; } -if ${lt_cv_objdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 -$as_echo "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - - - -cat >>confdefs.h <<_ACEOF -#define LT_OBJDIR "$lt_cv_objdir/" -_ACEOF - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test set != "${COLLECT_NAMES+set}"; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a '.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld=$lt_cv_prog_gnu_ld - -old_CC=$CC -old_CFLAGS=$CFLAGS - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -func_cc_basename $compiler -cc_basename=$func_cc_basename_result - - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD=$MAGIC_CMD - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/${ac_tool_prefix}file"; then - lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD=$lt_cv_path_MAGIC_CMD - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS=$lt_save_ifs - MAGIC_CMD=$lt_save_MAGIC_CMD - ;; -esac -fi - -MAGIC_CMD=$lt_cv_path_MAGIC_CMD -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 -$as_echo_n "checking for file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD=$MAGIC_CMD - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/file"; then - lt_cv_path_MAGIC_CMD=$ac_dir/"file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD=$lt_cv_path_MAGIC_CMD - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS=$lt_save_ifs - MAGIC_CMD=$lt_save_MAGIC_CMD - ;; -esac -fi - -MAGIC_CMD=$lt_cv_path_MAGIC_CMD -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -# Use C for the default configuration in the libtool script - -lt_save_CC=$CC -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - -lt_prog_compiler_no_builtin_flag= - -if test yes = "$GCC"; then - case $cc_basename in - nvcc*) - lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; - *) - lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; - esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - - - - - - - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - - - if test yes = "$GCC"; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - lt_prog_compiler_pic='-fPIC' - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the '-m68020' flag to GCC prevents building anything better, - # like '-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - if test -n "$lt_prog_compiler_pic"; then - lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" - fi - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - case $cc_basename in - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='$wl-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - # old Intel for x86_64, which still supported -KPIC. - ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - *Sun\ F* | *Sun*Fortran*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Intel*\ [CF]*Compiler*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - *Portland\ Group*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - esac - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -case $host_os in - # For platforms that do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic=$lt_prog_compiler_pic -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -$as_echo "$lt_cv_prog_compiler_pic" >&6; } -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if ${lt_cv_prog_compiler_pic_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_pic_works"; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi - - - - - - - - - - - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -$as_echo "$lt_cv_prog_compiler_static_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_static_works"; then - : -else - lt_prog_compiler_static= -fi - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - -hard_links=nottested -if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test no = "$hard_links"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - runpath_var= - allow_undefined_flag= - always_export_symbols=no - archive_cmds= - archive_expsym_cmds= - compiler_needs_object=no - enable_shared_with_static_runtimes=no - export_dynamic_flag_spec= - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - hardcode_automatic=no - hardcode_direct=no - hardcode_direct_absolute=no - hardcode_libdir_flag_spec= - hardcode_libdir_separator= - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - inherit_rpath=no - link_all_deplibs=unknown - module_cmds= - module_expsym_cmds= - old_archive_from_new_cmds= - old_archive_from_expsyms_cmds= - thread_safe_flag_spec= - whole_archive_flag_spec= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ' (' and ')$', so one must not match beginning or - # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', - # as well as any symbol that contains 'd'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test yes != "$GCC"; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd* | bitrig*) - with_gnu_ld=no - ;; - esac - - ld_shlibs=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test yes = "$with_gnu_ld"; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test yes = "$lt_use_gnu_ld_interface"; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='$wl' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - export_dynamic_flag_spec='$wl--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test ia64 != "$host_cpu"; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='$wl--export-all-symbols' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file, use it as - # is; otherwise, prepend EXPORTS... - archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - - haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - link_all_deplibs=yes - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - shrext_cmds=.dll - archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - enable_shared_with_static_runtimes=yes - ;; - - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - export_dynamic_flag_spec='$wl-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test linux-dietlibc = "$host_os"; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test no = "$tmp_diet" - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - whole_archive_flag_spec= - tmp_sharedflag='--shared' ;; - nagfor*) # NAGFOR 5.3 - tmp_sharedflag='-Wl,-shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - compiler_needs_object=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - compiler_needs_object=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - - if test yes = "$supports_anon_versioning"; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - tcc*) - export_dynamic_flag_spec='-rdynamic' - ;; - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test yes = "$supports_anon_versioning"; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - ld_shlibs=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test no = "$ld_shlibs"; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix[4-9]*) - if test ia64 = "$host_cpu"; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag= - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to GNU nm, but means don't demangle to AIX nm. - # Without the "-l" option, or with the "-B" option, AIX nm treats - # weak defined symbols like other global defined symbols, whereas - # GNU nm marks them as "W". - # While the 'weak' keyword is ignored in the Export File, we need - # it in the Import File for the 'aix-soname' feature, so we have - # to replace the "-B" option with "-P" for AIX nm. - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # have runtime linking enabled, and use it for executables. - # For shared libraries, we enable/disable runtime linking - # depending on the kind of the shared library created - - # when "with_aix_soname,aix_use_runtimelinking" is: - # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables - # "aix,yes" lib.so shared, rtl:yes, for executables - # lib.a static archive - # "both,no" lib.so.V(shr.o) shared, rtl:yes - # lib.a(lib.so.V) shared, rtl:no, for executables - # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a(lib.so.V) shared, rtl:no - # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a static archive - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then - aix_use_runtimelinking=yes - break - fi - done - if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then - # With aix-soname=svr4, we create the lib.so.V shared archives only, - # so we don't have lib.a shared libs to link our executables. - # We have to force runtime linking in this case. - aix_use_runtimelinking=yes - LDFLAGS="$LDFLAGS -Wl,-brtl" - fi - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds='' - hardcode_direct=yes - hardcode_direct_absolute=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - file_list_spec='$wl-f,' - case $with_aix_soname,$aix_use_runtimelinking in - aix,*) ;; # traditional, no import file - svr4,* | *,yes) # use import file - # The Import File defines what to hardcode. - hardcode_direct=no - hardcode_direct_absolute=no - ;; - esac - - if test yes = "$GCC"; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`$CC -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test yes = "$aix_use_runtimelinking"; then - shared_flag="$shared_flag "'$wl-G' - fi - # Need to ensure runtime linking is disabled for the traditional - # shared library, or the linker may eventually find shared libraries - # /with/ Import File - we do not want to mix them. - shared_flag_aix='-shared' - shared_flag_svr4='-shared $wl-G' - else - # not using gcc - if test ia64 = "$host_cpu"; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test yes = "$aix_use_runtimelinking"; then - shared_flag='$wl-G' - else - shared_flag='$wl-bM:SRE' - fi - shared_flag_aix='$wl-bM:SRE' - shared_flag_svr4='$wl-G' - fi - fi - - export_dynamic_flag_spec='$wl-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - if test set = "${lt_cv_aix_libpath+set}"; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=/usr/lib:/lib - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag - else - if test ia64 = "$host_cpu"; then - hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - if test set = "${lt_cv_aix_libpath+set}"; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=/usr/lib:/lib - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' $wl-bernotok' - allow_undefined_flag=' $wl-berok' - if test yes = "$with_gnu_ld"; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - fi - archive_cmds_need_lc=yes - archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' - # -brtl affects multiple linker settings, -berok does not and is overridden later - compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' - if test svr4 != "$with_aix_soname"; then - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' - fi - if test aix != "$with_aix_soname"; then - archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' - else - # used by -dlpreopen to get the symbols - archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' - fi - archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - always_export_symbols=yes - file_list_spec='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' - archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then - cp "$export_symbols" "$output_objdir/$soname.def"; - echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; - else - $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, )='true' - enable_shared_with_static_runtimes=yes - exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - old_postinstall_cmds='chmod 644 $oldlib' - postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile=$lt_outputfile.exe - lt_tool_outputfile=$lt_tool_outputfile.exe - ;; - esac~ - if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - enable_shared_with_static_runtimes=yes - ;; - esac - ;; - - darwin* | rhapsody*) - - - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - if test yes = "$lt_cv_ld_force_load"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - - else - whole_archive_flag_spec='' - fi - link_all_deplibs=yes - allow_undefined_flag=$_lt_dar_allow_undefined - case $cc_basename in - ifort*|nagfor*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test yes = "$_lt_dar_can_shared"; then - output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" - archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" - module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" - - else - ld_shlibs=no - fi - - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2.*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9*) - if test yes = "$GCC"; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='$wl-E' - ;; - - hpux10*) - if test yes,no = "$GCC,$with_gnu_ld"; then - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test no = "$with_gnu_ld"; then - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='$wl-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - - hpux11*) - if test yes,no = "$GCC,$with_gnu_ld"; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 -$as_echo_n "checking if $CC understands -b... " >&6; } -if ${lt_cv_prog_compiler__b+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler__b=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -b" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler__b=yes - fi - else - lt_cv_prog_compiler__b=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 -$as_echo "$lt_cv_prog_compiler__b" >&6; } - -if test yes = "$lt_cv_prog_compiler__b"; then - archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -fi - - ;; - esac - fi - if test no = "$with_gnu_ld"; then - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='$wl-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test yes = "$GCC"; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -if ${lt_cv_irix_exported_symbol+:} false; then : - $as_echo_n "(cached) " >&6 -else - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int foo (void) { return 0; } -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_irix_exported_symbol=yes -else - lt_cv_irix_exported_symbol=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -$as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test yes = "$lt_cv_irix_exported_symbol"; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' - fi - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - inherit_rpath=yes - link_all_deplibs=yes - ;; - - linux*) - case $cc_basename in - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - ld_shlibs=yes - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - *nto* | *qnx*) - ;; - - openbsd* | bitrig*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - export_dynamic_flag_spec='$wl-E' - else - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - fi - else - ld_shlibs=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - shrext_cmds=.dll - archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - enable_shared_with_static_runtimes=yes - ;; - - osf3*) - if test yes = "$GCC"; then - allow_undefined_flag=' $wl-expect_unresolved $wl\*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test yes = "$GCC"; then - allow_undefined_flag=' $wl-expect_unresolved $wl\*' - archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - archive_cmds_need_lc='no' - hardcode_libdir_separator=: - ;; - - solaris*) - no_undefined_flag=' -z defs' - if test yes = "$GCC"; then - wlarc='$wl' - archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='$wl' - archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands '-z linker_flag'. GCC discards it without '$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test yes = "$GCC"; then - whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test sequent = "$host_vendor"; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='$wl-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We CANNOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='$wl-z,text' - allow_undefined_flag='$wl-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='$wl-R,$libdir' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='$wl-Bexport' - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac - - if test sni = "$host_vendor"; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='$wl-Blargedynsym' - ;; - esac - fi - fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 -$as_echo "$ld_shlibs" >&6; } -test no = "$ld_shlibs" && can_build_shared=no - -with_gnu_ld=$with_gnu_ld - - - - - - - - - - - - - - - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - - if test yes,yes = "$GCC,$enable_shared"; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } - archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc - ;; - esac - fi - ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } - -if test yes = "$GCC"; then - case $host_os in - darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; - *) lt_awk_arg='/^libraries:/' ;; - esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; - *) lt_sed_strip_eq='s|=/|/|g' ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary... - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - # ...but if some path component already ends with the multilib dir we assume - # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). - case "$lt_multi_os_dir; $lt_search_path_spec " in - "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) - lt_multi_os_dir= - ;; - esac - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" - elif test -n "$lt_multi_os_dir"; then - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS = " "; FS = "/|\n";} { - lt_foo = ""; - lt_count = 0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo = "/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's|/\([A-Za-z]:\)|\1|g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=.so -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - - - -case $host_os in -aix3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='$libname$release$shared_ext$major' - ;; - -aix[4-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test ia64 = "$host_cpu"; then - # AIX 5 supports IA64 - library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line '#! .'. This would cause the generated library to - # depend on '.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # Using Import Files as archive members, it is possible to support - # filename-based versioning of shared library archives on AIX. While - # this would work for both with and without runtime linking, it will - # prevent static linking of such archives. So we do filename-based - # shared library versioning with .so extension only, which is used - # when both runtime linking and shared linking is enabled. - # Unfortunately, runtime linking may impact performance, so we do - # not want this to be the default eventually. Also, we use the - # versioned .so libs for executables only if there is the -brtl - # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. - # To allow for filename-based versioning support, we need to create - # libNAME.so.V as an archive file, containing: - # *) an Import File, referring to the versioned filename of the - # archive as well as the shared archive member, telling the - # bitwidth (32 or 64) of that shared object, and providing the - # list of exported symbols of that shared object, eventually - # decorated with the 'weak' keyword - # *) the shared object with the F_LOADONLY flag set, to really avoid - # it being seen by the linker. - # At run time we better use the real file rather than another symlink, - # but for link time we create the symlink libNAME.so -> libNAME.so.V - - case $with_aix_soname,$aix_use_runtimelinking in - # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - aix,yes) # traditional libtool - dynamic_linker='AIX unversionable lib.so' - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - aix,no) # traditional AIX only - dynamic_linker='AIX lib.a(lib.so.V)' - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - ;; - svr4,*) # full svr4 only - dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,yes) # both, prefer svr4 - dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # unpreferred sharedlib libNAME.a needs extra handling - postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' - postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,no) # both, prefer aix - dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling - postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' - postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' - ;; - esac - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='$libname$shared_ext' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - library_names_spec='$libname.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec=$LIB - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; - - *) - # Assume MSVC wrapper - library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' - soname_spec='$libname$release$major$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[23].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -haiku*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - if test 32 = "$HPUX_IA64_MODE"; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - sys_lib_dlsearch_path_spec=/usr/lib/hpux32 - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - sys_lib_dlsearch_path_spec=/usr/lib/hpux64 - fi - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[3-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test yes = "$lt_cv_prog_gnu_ld"; then - version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" - sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -linux*android*) - version_type=none # Android doesn't support versioned libraries. - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext' - soname_spec='$libname$release$shared_ext' - finish_cmds= - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - dynamic_linker='Android linker' - # Don't embed -rpath directories since the linker doesn't support them. - hardcode_libdir_flag_spec='-L$libdir' - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - -fi - - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Add ABI-specific directories to the system library path. - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" - - # Ideally, we could use ldconfig to report *all* directores which are - # searched for libraries, however this is still not possible. Aside from not - # being certain /sbin/ldconfig is available, command - # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, - # even though it is searched at run-time. Try to do the best guess by - # appending ld.so.conf contents (and includes) to the search path. - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd* | bitrig*) - version_type=sunos - sys_lib_dlsearch_path_spec=/usr/lib - need_lib_prefix=no - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - need_version=no - else - need_version=yes - fi - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -os2*) - libname_spec='$name' - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - # OS/2 can only load a DLL with a base name of 8 characters or less. - soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; - v=$($ECHO $release$versuffix | tr -d .-); - n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); - $ECHO $n$v`$shared_ext' - library_names_spec='${libname}_dll.$libext' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=BEGINLIBPATH - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test yes = "$with_gnu_ld"; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec; then - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' - soname_spec='$libname$shared_ext.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=sco - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test yes = "$with_gnu_ld"; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test no = "$dynamic_linker" && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test yes = "$GCC"; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then - sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec -fi - -if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then - sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec -fi - -# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... -configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec - -# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code -func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" - -# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool -configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || - test yes = "$hardcode_automatic"; then - - # We can hardcode non-existent directories. - if test no != "$hardcode_direct" && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && - test no != "$hardcode_minus_L"; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 -$as_echo "$hardcode_action" >&6; } - -if test relink = "$hardcode_action" || - test yes = "$inherit_rpath"; then - # Fast installation is not supported - enable_fast_install=no -elif test yes = "$shlibpath_overrides_runpath" || - test no = "$enable_shared"; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - - - - - - if test yes != "$enable_dlopen"; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen=load_add_on - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen=LoadLibrary - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl -else - - lt_cv_dlopen=dyld - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - tpf*) - # Don't try to run any link tests for TPF. We know it's impossible - # because TPF is a cross-compiler, and we know how we open DSOs. - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - lt_cv_dlopen_self=no - ;; - - *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen=shl_load -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if ${ac_cv_lib_dld_shl_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_shl_load=yes -else - ac_cv_lib_dld_shl_load=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld -else - ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen=dlopen -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 -$as_echo_n "checking for dlopen in -lsvld... " >&6; } -if ${ac_cv_lib_svld_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_svld_dlopen=yes -else - ac_cv_lib_svld_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 -$as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 -$as_echo_n "checking for dld_link in -ldld... " >&6; } -if ${ac_cv_lib_dld_dld_link+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_dld_link=yes -else - ac_cv_lib_dld_dld_link=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 -$as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test no = "$lt_cv_dlopen"; then - enable_dlopen=no - else - enable_dlopen=yes - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS=$CPPFLAGS - test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS=$LDFLAGS - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS=$LIBS - LIBS="$lt_cv_dlopen_libs $LIBS" - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 -$as_echo_n "checking whether a program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test yes = "$cross_compiling"; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisibility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 -$as_echo "$lt_cv_dlopen_self" >&6; } - - if test yes = "$lt_cv_dlopen_self"; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 -$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self_static+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test yes = "$cross_compiling"; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisibility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 -$as_echo "$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS=$save_CPPFLAGS - LDFLAGS=$save_LDFLAGS - LIBS=$save_LIBS - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - - - - - - - - - - - - - - - - -striplib= -old_striplib= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 -$as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP"; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - fi - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi - - - - - - - - - - - - - # Report what library types will actually be built - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } - test no = "$can_build_shared" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test yes = "$enable_shared" && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[4-9]*) - if test ia64 != "$host_cpu"; then - case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in - yes,aix,yes) ;; # shared object as lib.so file only - yes,svr4,*) ;; # shared object as lib.so archive member only - yes,*) enable_static=no ;; # shared object in lib.a archive as well - esac - fi - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } - # Make sure either enable_shared or enable_static is yes. - test yes = "$enable_shared" || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } - - - - -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC=$lt_save_CC - - - - - - - - - - - - - - - - ac_config_commands="$ac_config_commands libtool" - - - - -# Only expand once: - - - -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=0;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - - - - # C support is enabled by default. - - - # Only enable C++ support if AC_PROG_CXX is called. The redefinition of - # AC_PROG_CXX is so that a fatal error is emitted if this macro is called - # before AC_PROG_CXX, which would otherwise cause no C++ warnings to be - # checked. - - - - - # Default value for IS-RELEASE is $ax_is_release - ax_compiler_flags_is_release=$ax_is_release - - # Check whether --enable-compile-warnings was given. -if test "${enable_compile_warnings+set}" = set; then : - enableval=$enable_compile_warnings; -else - if test "$ax_compiler_flags_is_release" = "yes"; then : - enable_compile_warnings="yes" -else - enable_compile_warnings="error" -fi -fi - - # Check whether --enable-Werror was given. -if test "${enable_Werror+set}" = set; then : - enableval=$enable_Werror; -else - enable_Werror=maybe -fi - - - # Return the user's chosen warning level - if test "$enable_Werror" = "no" -a \ - "$enable_compile_warnings" = "error"; then : - - enable_compile_warnings="yes" - -fi - - ax_enable_compile_warnings=$enable_compile_warnings - - - - - - - - - - - # Variable names - - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - # Always pass -Werror=unknown-warning-option to get Clang to fail on bad - # flags, otherwise they are always appended to the warn_cflags variable, and - # Clang warns on them for every compilation unit. - # If this is passed to GCC, it will explode, so the flag must be enabled - # conditionally. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts -Werror=unknown-warning-option" >&5 -$as_echo_n "checking whether C compiler accepts -Werror=unknown-warning-option... " >&6; } -if ${ax_cv_check_cflags___Werror_unknown_warning_option+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ax_check_save_flags=$CFLAGS - CFLAGS="$CFLAGS -Werror=unknown-warning-option" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ax_cv_check_cflags___Werror_unknown_warning_option=yes -else - ax_cv_check_cflags___Werror_unknown_warning_option=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS=$ax_check_save_flags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_cflags___Werror_unknown_warning_option" >&5 -$as_echo "$ax_cv_check_cflags___Werror_unknown_warning_option" >&6; } -if test "x$ax_cv_check_cflags___Werror_unknown_warning_option" = xyes; then : - - ax_compiler_flags_test="-Werror=unknown-warning-option" - -else - - ax_compiler_flags_test="" - -fi - - - # Check that -Wno-suggest-attribute=format is supported - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts -Wno-suggest-attribute=format" >&5 -$as_echo_n "checking whether C compiler accepts -Wno-suggest-attribute=format... " >&6; } -if ${ax_cv_check_cflags___Wno_suggest_attribute_format+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ax_check_save_flags=$CFLAGS - CFLAGS="$CFLAGS -Wno-suggest-attribute=format" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ax_cv_check_cflags___Wno_suggest_attribute_format=yes -else - ax_cv_check_cflags___Wno_suggest_attribute_format=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS=$ax_check_save_flags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_cflags___Wno_suggest_attribute_format" >&5 -$as_echo "$ax_cv_check_cflags___Wno_suggest_attribute_format" >&6; } -if test "x$ax_cv_check_cflags___Wno_suggest_attribute_format" = xyes; then : - - ax_compiler_no_suggest_attribute_flags="-Wno-suggest-attribute=format" - -else - - ax_compiler_no_suggest_attribute_flags="" - -fi - - - # Base flags - - - - -for flag in -fno-strict-aliasing ; do - as_CACHEVAR=`$as_echo "ax_cv_check_cflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts $flag" >&5 -$as_echo_n "checking whether C compiler accepts $flag... " >&6; } -if eval \${$as_CACHEVAR+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ax_check_save_flags=$CFLAGS - CFLAGS="$CFLAGS $ax_compiler_flags_test $flag" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$as_CACHEVAR=yes" -else - eval "$as_CACHEVAR=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS=$ax_check_save_flags -fi -eval ac_res=\$$as_CACHEVAR - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : - -if ${WARN_CFLAGS+:} false; then : - - case " $WARN_CFLAGS " in #( - *" $flag "*) : - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS already contains \$flag"; } >&5 - (: WARN_CFLAGS already contains $flag) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } ;; #( - *) : - - as_fn_append WARN_CFLAGS " $flag" - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 - (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - ;; -esac - -else - - WARN_CFLAGS=$flag - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 - (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - -fi - -else - : -fi - -done - - - if test "$ax_enable_compile_warnings" != "no"; then : - - # "yes" flags - - - - -for flag in -Wall -Wextra -Wundef -Wnested-externs -Wwrite-strings -Wpointer-arith -Wmissing-declarations -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wno-unused-parameter -Wno-missing-field-initializers -Wdeclaration-after-statement -Wformat=2 -Wold-style-definition -Wcast-align -Wformat-nonliteral -Wformat-security -Wsign-compare -Wstrict-aliasing -Wshadow -Winline -Wpacked -Wmissing-format-attribute -Wmissing-noreturn -Winit-self -Wredundant-decls -Wmissing-include-dirs -Wunused-but-set-variable -Warray-bounds -Wimplicit-function-declaration -Wreturn-type -Wswitch-enum -Wswitch-default ; do - as_CACHEVAR=`$as_echo "ax_cv_check_cflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts $flag" >&5 -$as_echo_n "checking whether C compiler accepts $flag... " >&6; } -if eval \${$as_CACHEVAR+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ax_check_save_flags=$CFLAGS - CFLAGS="$CFLAGS $ax_compiler_flags_test $flag" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$as_CACHEVAR=yes" -else - eval "$as_CACHEVAR=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS=$ax_check_save_flags -fi -eval ac_res=\$$as_CACHEVAR - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : - -if ${WARN_CFLAGS+:} false; then : - - case " $WARN_CFLAGS " in #( - *" $flag "*) : - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS already contains \$flag"; } >&5 - (: WARN_CFLAGS already contains $flag) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } ;; #( - *) : - - as_fn_append WARN_CFLAGS " $flag" - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 - (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - ;; -esac - -else - - WARN_CFLAGS=$flag - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 - (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - -fi - -else - : -fi - -done - - -fi - if test "$ax_enable_compile_warnings" = "error"; then : - - # "error" flags; -Werror has to be appended unconditionally because - # it's not possible to test for - # - # suggest-attribute=format is disabled because it gives too many false - # positives - -if ${WARN_CFLAGS+:} false; then : - - case " $WARN_CFLAGS " in #( - *" -Werror "*) : - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS already contains -Werror"; } >&5 - (: WARN_CFLAGS already contains -Werror) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } ;; #( - *) : - - as_fn_append WARN_CFLAGS " -Werror" - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 - (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - ;; -esac - -else - - WARN_CFLAGS=-Werror - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 - (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - -fi - - - - - - -for flag in $ax_compiler_no_suggest_attribute_flags ; do - as_CACHEVAR=`$as_echo "ax_cv_check_cflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts $flag" >&5 -$as_echo_n "checking whether C compiler accepts $flag... " >&6; } -if eval \${$as_CACHEVAR+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ax_check_save_flags=$CFLAGS - CFLAGS="$CFLAGS $ax_compiler_flags_test $flag" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$as_CACHEVAR=yes" -else - eval "$as_CACHEVAR=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS=$ax_check_save_flags -fi -eval ac_res=\$$as_CACHEVAR - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : - -if ${WARN_CFLAGS+:} false; then : - - case " $WARN_CFLAGS " in #( - *" $flag "*) : - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS already contains \$flag"; } >&5 - (: WARN_CFLAGS already contains $flag) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } ;; #( - *) : - - as_fn_append WARN_CFLAGS " $flag" - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 - (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - ;; -esac - -else - - WARN_CFLAGS=$flag - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 - (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - -fi - -else - : -fi - -done - - -fi - - # In the flags below, when disabling specific flags, always add *both* - # -Wno-foo and -Wno-error=foo. This fixes the situation where (for example) - # we enable -Werror, disable a flag, and a build bot passes CFLAGS=-Wall, - # which effectively turns that flag back on again as an error. - for flag in $WARN_CFLAGS; do - case $flag in #( - -Wno-*=*) : - ;; #( - -Wno-*) : - - - - - -for flag in -Wno-error=$($as_echo $flag | $SED 's/^-Wno-//'); do - as_CACHEVAR=`$as_echo "ax_cv_check_cflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts $flag" >&5 -$as_echo_n "checking whether C compiler accepts $flag... " >&6; } -if eval \${$as_CACHEVAR+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ax_check_save_flags=$CFLAGS - CFLAGS="$CFLAGS $ax_compiler_flags_test $flag" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$as_CACHEVAR=yes" -else - eval "$as_CACHEVAR=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS=$ax_check_save_flags -fi -eval ac_res=\$$as_CACHEVAR - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : - -if ${WARN_CFLAGS+:} false; then : - - case " $WARN_CFLAGS " in #( - *" $flag "*) : - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS already contains \$flag"; } >&5 - (: WARN_CFLAGS already contains $flag) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } ;; #( - *) : - - as_fn_append WARN_CFLAGS " $flag" - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 - (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - ;; -esac - -else - - WARN_CFLAGS=$flag - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 - (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - -fi - -else - : -fi - -done - - ;; #( - *) : - ;; -esac - done - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - # Substitute the variables - - - - - - - - - - - - - - # Variable names - - - # Always pass -Werror=unknown-warning-option to get Clang to fail on bad - # flags, otherwise they are always appended to the warn_ldflags variable, - # and Clang warns on them for every compilation unit. - # If this is passed to GCC, it will explode, so the flag must be enabled - # conditionally. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts -Werror=unknown-warning-option" >&5 -$as_echo_n "checking whether C compiler accepts -Werror=unknown-warning-option... " >&6; } -if ${ax_cv_check_cflags___Werror_unknown_warning_option+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ax_check_save_flags=$CFLAGS - CFLAGS="$CFLAGS -Werror=unknown-warning-option" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ax_cv_check_cflags___Werror_unknown_warning_option=yes -else - ax_cv_check_cflags___Werror_unknown_warning_option=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS=$ax_check_save_flags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_cflags___Werror_unknown_warning_option" >&5 -$as_echo "$ax_cv_check_cflags___Werror_unknown_warning_option" >&6; } -if test "x$ax_cv_check_cflags___Werror_unknown_warning_option" = xyes; then : - - ax_compiler_flags_test="-Werror=unknown-warning-option" - -else - - ax_compiler_flags_test="" - -fi - - - # macOS linker does not have --as-needed - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts -Wl,--no-as-needed" >&5 -$as_echo_n "checking whether the linker accepts -Wl,--no-as-needed... " >&6; } -if ${ax_cv_check_ldflags___Wl___no_as_needed+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ax_check_save_flags=$LDFLAGS - LDFLAGS="$LDFLAGS -Wl,--no-as-needed" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ax_cv_check_ldflags___Wl___no_as_needed=yes -else - ax_cv_check_ldflags___Wl___no_as_needed=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$ax_check_save_flags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_ldflags___Wl___no_as_needed" >&5 -$as_echo "$ax_cv_check_ldflags___Wl___no_as_needed" >&6; } -if test "x$ax_cv_check_ldflags___Wl___no_as_needed" = xyes; then : - - ax_compiler_flags_as_needed_option="-Wl,--no-as-needed" - -else - - ax_compiler_flags_as_needed_option="" - -fi - - - # macOS linker speaks with a different accent - ax_compiler_flags_fatal_warnings_option="" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts -Wl,--fatal-warnings" >&5 -$as_echo_n "checking whether the linker accepts -Wl,--fatal-warnings... " >&6; } -if ${ax_cv_check_ldflags___Wl___fatal_warnings+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ax_check_save_flags=$LDFLAGS - LDFLAGS="$LDFLAGS -Wl,--fatal-warnings" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ax_cv_check_ldflags___Wl___fatal_warnings=yes -else - ax_cv_check_ldflags___Wl___fatal_warnings=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$ax_check_save_flags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_ldflags___Wl___fatal_warnings" >&5 -$as_echo "$ax_cv_check_ldflags___Wl___fatal_warnings" >&6; } -if test "x$ax_cv_check_ldflags___Wl___fatal_warnings" = xyes; then : - - ax_compiler_flags_fatal_warnings_option="-Wl,--fatal-warnings" - -else - : -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts -Wl,-fatal_warnings" >&5 -$as_echo_n "checking whether the linker accepts -Wl,-fatal_warnings... " >&6; } -if ${ax_cv_check_ldflags___Wl__fatal_warnings+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ax_check_save_flags=$LDFLAGS - LDFLAGS="$LDFLAGS -Wl,-fatal_warnings" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ax_cv_check_ldflags___Wl__fatal_warnings=yes -else - ax_cv_check_ldflags___Wl__fatal_warnings=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$ax_check_save_flags -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_ldflags___Wl__fatal_warnings" >&5 -$as_echo "$ax_cv_check_ldflags___Wl__fatal_warnings" >&6; } -if test "x$ax_cv_check_ldflags___Wl__fatal_warnings" = xyes; then : - - ax_compiler_flags_fatal_warnings_option="-Wl,-fatal_warnings" - -else - : -fi - - - # Base flags - - - - -for flag in $ax_compiler_flags_as_needed_option ; do - as_CACHEVAR=`$as_echo "ax_cv_check_ldflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts $flag" >&5 -$as_echo_n "checking whether the linker accepts $flag... " >&6; } -if eval \${$as_CACHEVAR+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ax_check_save_flags=$LDFLAGS - LDFLAGS="$LDFLAGS $ax_compiler_flags_test $flag" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$as_CACHEVAR=yes" -else - eval "$as_CACHEVAR=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$ax_check_save_flags -fi -eval ac_res=\$$as_CACHEVAR - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : - -if ${WARN_LDFLAGS+:} false; then : - - case " $WARN_LDFLAGS " in #( - *" $flag "*) : - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS already contains \$flag"; } >&5 - (: WARN_LDFLAGS already contains $flag) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } ;; #( - *) : - - as_fn_append WARN_LDFLAGS " $flag" - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS=\"\$WARN_LDFLAGS\""; } >&5 - (: WARN_LDFLAGS="$WARN_LDFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - ;; -esac - -else - - WARN_LDFLAGS=$flag - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS=\"\$WARN_LDFLAGS\""; } >&5 - (: WARN_LDFLAGS="$WARN_LDFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - -fi - -else - : -fi - -done - - - if test "$ax_enable_compile_warnings" != "no"; then : - - # "yes" flags - - - - -for flag in ; do - as_CACHEVAR=`$as_echo "ax_cv_check_ldflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts $flag" >&5 -$as_echo_n "checking whether the linker accepts $flag... " >&6; } -if eval \${$as_CACHEVAR+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ax_check_save_flags=$LDFLAGS - LDFLAGS="$LDFLAGS $ax_compiler_flags_test $flag" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$as_CACHEVAR=yes" -else - eval "$as_CACHEVAR=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$ax_check_save_flags -fi -eval ac_res=\$$as_CACHEVAR - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : - -if ${WARN_LDFLAGS+:} false; then : - - case " $WARN_LDFLAGS " in #( - *" $flag "*) : - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS already contains \$flag"; } >&5 - (: WARN_LDFLAGS already contains $flag) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } ;; #( - *) : - - as_fn_append WARN_LDFLAGS " $flag" - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS=\"\$WARN_LDFLAGS\""; } >&5 - (: WARN_LDFLAGS="$WARN_LDFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - ;; -esac - -else - - WARN_LDFLAGS=$flag - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS=\"\$WARN_LDFLAGS\""; } >&5 - (: WARN_LDFLAGS="$WARN_LDFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - -fi - -else - : -fi - -done - - -fi - if test "$ax_enable_compile_warnings" = "error"; then : - - # "error" flags; -Werror has to be appended unconditionally because - # it's not possible to test for - # - # suggest-attribute=format is disabled because it gives too many false - # positives - - - - -for flag in $ax_compiler_flags_fatal_warnings_option ; do - as_CACHEVAR=`$as_echo "ax_cv_check_ldflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts $flag" >&5 -$as_echo_n "checking whether the linker accepts $flag... " >&6; } -if eval \${$as_CACHEVAR+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ax_check_save_flags=$LDFLAGS - LDFLAGS="$LDFLAGS $ax_compiler_flags_test $flag" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$as_CACHEVAR=yes" -else - eval "$as_CACHEVAR=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$ax_check_save_flags -fi -eval ac_res=\$$as_CACHEVAR - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : - -if ${WARN_LDFLAGS+:} false; then : - - case " $WARN_LDFLAGS " in #( - *" $flag "*) : - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS already contains \$flag"; } >&5 - (: WARN_LDFLAGS already contains $flag) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } ;; #( - *) : - - as_fn_append WARN_LDFLAGS " $flag" - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS=\"\$WARN_LDFLAGS\""; } >&5 - (: WARN_LDFLAGS="$WARN_LDFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - ;; -esac - -else - - WARN_LDFLAGS=$flag - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS=\"\$WARN_LDFLAGS\""; } >&5 - (: WARN_LDFLAGS="$WARN_LDFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - -fi - -else - : -fi - -done - - -fi - - # Substitute the variables - - - - - - - # Variable names - - - # Base flags - -if ${WARN_SCANNERFLAGS+:} false; then : - - case " $WARN_SCANNERFLAGS " in #( - *" "*) : - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS already contains "; } >&5 - (: WARN_SCANNERFLAGS already contains ) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } ;; #( - *) : - - as_fn_append WARN_SCANNERFLAGS " " - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS=\"\$WARN_SCANNERFLAGS\""; } >&5 - (: WARN_SCANNERFLAGS="$WARN_SCANNERFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - ;; -esac - -else - - WARN_SCANNERFLAGS= - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS=\"\$WARN_SCANNERFLAGS\""; } >&5 - (: WARN_SCANNERFLAGS="$WARN_SCANNERFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - -fi - - - if test "$ax_enable_compile_warnings" != "no"; then : - - # "yes" flags - -if ${WARN_SCANNERFLAGS+:} false; then : - - case " $WARN_SCANNERFLAGS " in #( - *" --warn-all "*) : - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS already contains --warn-all "; } >&5 - (: WARN_SCANNERFLAGS already contains --warn-all ) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } ;; #( - *) : - - as_fn_append WARN_SCANNERFLAGS " --warn-all " - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS=\"\$WARN_SCANNERFLAGS\""; } >&5 - (: WARN_SCANNERFLAGS="$WARN_SCANNERFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - ;; -esac - -else - - WARN_SCANNERFLAGS= --warn-all - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS=\"\$WARN_SCANNERFLAGS\""; } >&5 - (: WARN_SCANNERFLAGS="$WARN_SCANNERFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - -fi - - -fi - if test "$ax_enable_compile_warnings" = "error"; then : - - # "error" flags - -if ${WARN_SCANNERFLAGS+:} false; then : - - case " $WARN_SCANNERFLAGS " in #( - *" --warn-error "*) : - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS already contains --warn-error "; } >&5 - (: WARN_SCANNERFLAGS already contains --warn-error ) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } ;; #( - *) : - - as_fn_append WARN_SCANNERFLAGS " --warn-error " - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS=\"\$WARN_SCANNERFLAGS\""; } >&5 - (: WARN_SCANNERFLAGS="$WARN_SCANNERFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - ;; -esac - -else - - WARN_SCANNERFLAGS= --warn-error - { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS=\"\$WARN_SCANNERFLAGS\""; } >&5 - (: WARN_SCANNERFLAGS="$WARN_SCANNERFLAGS") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - -fi - - -fi - - # Substitute the variables - - - - -# Code coverage - - - - # allow to override gcov location - -# Check whether --with-gcov was given. -if test "${with_gcov+set}" = set; then : - withval=$with_gcov; _AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov -else - _AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov -fi - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with code coverage support" >&5 -$as_echo_n "checking whether to build with code coverage support... " >&6; } - # Check whether --enable-code-coverage was given. -if test "${enable_code_coverage+set}" = set; then : - enableval=$enable_code_coverage; -else - enable_code_coverage=no -fi - - - if test x$enable_code_coverage = xyes; then - CODE_COVERAGE_ENABLED_TRUE= - CODE_COVERAGE_ENABLED_FALSE='#' -else - CODE_COVERAGE_ENABLED_TRUE='#' - CODE_COVERAGE_ENABLED_FALSE= -fi - - CODE_COVERAGE_ENABLED=$enable_code_coverage - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_code_coverage" >&5 -$as_echo "$enable_code_coverage" >&6; } - - if test "$enable_code_coverage" = "yes" ; then : - - # check for gcov - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}$_AX_CODE_COVERAGE_GCOV_PROG_WITH", so it can be a program name with args. -set dummy ${ac_tool_prefix}$_AX_CODE_COVERAGE_GCOV_PROG_WITH; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_GCOV+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$GCOV"; then - ac_cv_prog_GCOV="$GCOV" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_GCOV="${ac_tool_prefix}$_AX_CODE_COVERAGE_GCOV_PROG_WITH" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -GCOV=$ac_cv_prog_GCOV -if test -n "$GCOV"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCOV" >&5 -$as_echo "$GCOV" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_GCOV"; then - ac_ct_GCOV=$GCOV - # Extract the first word of "$_AX_CODE_COVERAGE_GCOV_PROG_WITH", so it can be a program name with args. -set dummy $_AX_CODE_COVERAGE_GCOV_PROG_WITH; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_GCOV+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_GCOV"; then - ac_cv_prog_ac_ct_GCOV="$ac_ct_GCOV" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_GCOV="$_AX_CODE_COVERAGE_GCOV_PROG_WITH" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_GCOV=$ac_cv_prog_ac_ct_GCOV -if test -n "$ac_ct_GCOV"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_GCOV" >&5 -$as_echo "$ac_ct_GCOV" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_GCOV" = x; then - GCOV=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - GCOV=$ac_ct_GCOV - fi -else - GCOV="$ac_cv_prog_GCOV" -fi - - if test "X$GCOV" = "X:"; then : - as_fn_error $? "gcov is needed to do coverage" "$LINENO" 5 -fi - - - if test "$GCC" = "no" ; then : - - as_fn_error $? "not compiling with gcc, which is required for gcov code coverage" "$LINENO" 5 - -fi - - # Extract the first word of "lcov", so it can be a program name with args. -set dummy lcov; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_LCOV+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$LCOV"; then - ac_cv_prog_LCOV="$LCOV" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_LCOV="lcov" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -LCOV=$ac_cv_prog_LCOV -if test -n "$LCOV"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LCOV" >&5 -$as_echo "$LCOV" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - # Extract the first word of "genhtml", so it can be a program name with args. -set dummy genhtml; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_GENHTML+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$GENHTML"; then - ac_cv_prog_GENHTML="$GENHTML" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_GENHTML="genhtml" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -GENHTML=$ac_cv_prog_GENHTML -if test -n "$GENHTML"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GENHTML" >&5 -$as_echo "$GENHTML" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - if test -z "$LCOV" ; then : - - as_fn_error $? "To enable code coverage reporting you must have lcov installed" "$LINENO" 5 - -fi - - if test -z "$GENHTML" ; then : - - as_fn_error $? "Could not find genhtml from the lcov package" "$LINENO" 5 - -fi - - CODE_COVERAGE_CPPFLAGS="-DNDEBUG" - CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" - CODE_COVERAGE_CXXFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" - CODE_COVERAGE_LIBS="-lgcov" - CODE_COVERAGE_LDFLAGS="$CODE_COVERAGE_LIBS" - - - - - - - - CODE_COVERAGE_RULES_CHECK=' - -$(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) -k check - $(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) code-coverage-capture -' - CODE_COVERAGE_RULES_CAPTURE=' - $(code_coverage_v_lcov_cap)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(call code_coverage_sanitize,$(PACKAGE_NAME)-$(PACKAGE_VERSION))" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_OPTIONS) - $(code_coverage_v_lcov_ign)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN) --output-file "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_RMOPTS) - -@rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp - $(code_coverage_v_genhtml)LANG=C $(GENHTML) $(code_coverage_quiet) $(addprefix --prefix ,$(CODE_COVERAGE_DIRECTORY)) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS) - @echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html" -' - CODE_COVERAGE_RULES_CLEAN=' -clean: code-coverage-clean -distclean: code-coverage-clean -code-coverage-clean: - -$(LCOV) --directory $(top_builddir) -z - -rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY) - -find . \( -name "*.gcda" -o -name "*.gcno" -o -name "*.gcov" \) -delete -' - -else - - CODE_COVERAGE_RULES_CHECK=' - @echo "Need to reconfigure with --enable-code-coverage" -' - CODE_COVERAGE_RULES_CAPTURE="$CODE_COVERAGE_RULES_CHECK" - CODE_COVERAGE_RULES_CLEAN='' - -fi - -CODE_COVERAGE_RULES=' -# Code coverage -# -# Optional: -# - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting. -# Multiple directories may be specified, separated by whitespace. -# (Default: $(top_builddir)) -# - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated -# by lcov for code coverage. (Default: -# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info) -# - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage -# reports to be created. (Default: -# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage) -# - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage, -# set to 0 to disable it and leave empty to stay with the default. -# (Default: empty) -# - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov -# instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) -# - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov -# instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) -# - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov -# - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the -# collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) -# - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov -# instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) -# - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering -# lcov instance. (Default: empty) -# - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov -# instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) -# - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the -# genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) -# - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml -# instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) -# - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore -# -# The generated report will be titled using the $(PACKAGE_NAME) and -# $(PACKAGE_VERSION). In order to add the current git hash to the title, -# use the git-version-gen script, available online. - -# Optional variables -CODE_COVERAGE_DIRECTORY ?= $(top_builddir) -CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info -CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage -CODE_COVERAGE_BRANCH_COVERAGE ?= -CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ ---rc lcov_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) -CODE_COVERAGE_LCOV_SHOPTS ?= $(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) -CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)" -CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) -CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) -CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?= -CODE_COVERAGE_LCOV_RMOPTS ?= $(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) -CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\ -$(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ ---rc genhtml_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) -CODE_COVERAGE_GENHTML_OPTIONS ?= $(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) -CODE_COVERAGE_IGNORE_PATTERN ?= - -code_coverage_v_lcov_cap = $(code_coverage_v_lcov_cap_$(V)) -code_coverage_v_lcov_cap_ = $(code_coverage_v_lcov_cap_$(AM_DEFAULT_VERBOSITY)) -code_coverage_v_lcov_cap_0 = @echo " LCOV --capture"\ - $(CODE_COVERAGE_OUTPUT_FILE); -code_coverage_v_lcov_ign = $(code_coverage_v_lcov_ign_$(V)) -code_coverage_v_lcov_ign_ = $(code_coverage_v_lcov_ign_$(AM_DEFAULT_VERBOSITY)) -code_coverage_v_lcov_ign_0 = @echo " LCOV --remove /tmp/*"\ - $(CODE_COVERAGE_IGNORE_PATTERN); -code_coverage_v_genhtml = $(code_coverage_v_genhtml_$(V)) -code_coverage_v_genhtml_ = $(code_coverage_v_genhtml_$(AM_DEFAULT_VERBOSITY)) -code_coverage_v_genhtml_0 = @echo " GEN " $(CODE_COVERAGE_OUTPUT_DIRECTORY); -code_coverage_quiet = $(code_coverage_quiet_$(V)) -code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY)) -code_coverage_quiet_0 = --quiet - -# sanitizes the test-name: replaces with underscores: dashes and dots -code_coverage_sanitize = $(subst -,_,$(subst .,_,$(1))) - -# Use recursive makes in order to ignore errors during check -check-code-coverage:'"$CODE_COVERAGE_RULES_CHECK"' - -# Capture code coverage data -code-coverage-capture: code-coverage-capture-hook'"$CODE_COVERAGE_RULES_CAPTURE"' - -# Hook rule executed before code-coverage-capture, overridable by the user -code-coverage-capture-hook: - -'"$CODE_COVERAGE_RULES_CLEAN"' - -GITIGNOREFILES ?= -GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY) - -A''M_DISTCHECK_CONFIGURE_FLAGS ?= -A''M_DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage - -.PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean -' - - - - - -# GResources -# Extract the first word of "glib-compile-resources", so it can be a program name with args. -set dummy glib-compile-resources; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GLIB_COMPILE_RESOURCES+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GLIB_COMPILE_RESOURCES in - [\\/]* | ?:[\\/]*) - ac_cv_path_GLIB_COMPILE_RESOURCES="$GLIB_COMPILE_RESOURCES" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GLIB_COMPILE_RESOURCES="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -GLIB_COMPILE_RESOURCES=$ac_cv_path_GLIB_COMPILE_RESOURCES -if test -n "$GLIB_COMPILE_RESOURCES"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_COMPILE_RESOURCES" >&5 -$as_echo "$GLIB_COMPILE_RESOURCES" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - -# Internationalisation - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 -$as_echo_n "checking whether NLS is requested... " >&6; } - # Check whether --enable-nls was given. -if test "${enable_nls+set}" = set; then : - enableval=$enable_nls; USE_NLS=$enableval -else - USE_NLS=yes -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 -$as_echo "$USE_NLS" >&6; } - - - - - GETTEXT_MACRO_VERSION=0.19 - - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGFMT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case "$MSGFMT" in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && - (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" - test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" - ;; -esac -fi -MSGFMT="$ac_cv_path_MSGFMT" -if test "$MSGFMT" != ":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 -$as_echo "$MSGFMT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - # Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GMSGFMT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac -fi -GMSGFMT=$ac_cv_path_GMSGFMT -if test -n "$GMSGFMT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 -$as_echo "$GMSGFMT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; - *) MSGFMT_015=$MSGFMT ;; - esac - - case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; - *) GMSGFMT_015=$GMSGFMT ;; - esac - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_XGETTEXT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case "$XGETTEXT" in - [\\/]* | ?:[\\/]*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && - (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" - test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" - ;; -esac -fi -XGETTEXT="$ac_cv_path_XGETTEXT" -if test "$XGETTEXT" != ":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 -$as_echo "$XGETTEXT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - rm -f messages.po - - case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; - *) XGETTEXT_015=$XGETTEXT ;; - esac - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "msgmerge", so it can be a program name with args. -set dummy msgmerge; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGMERGE+:} false; then : - $as_echo_n "(cached) " >&6 -else - case "$MSGMERGE" in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then - ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" - test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" - ;; -esac -fi -MSGMERGE="$ac_cv_path_MSGMERGE" -if test "$MSGMERGE" != ":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 -$as_echo "$MSGMERGE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$localedir" || localedir='${datadir}/locale' - - - test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= - - - ac_config_commands="$ac_config_commands po-directories" - - - - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" - - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'` - while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${acl_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$acl_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 &5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${acl_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -$as_echo "$acl_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$acl_cv_prog_gnu_ld - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5 -$as_echo_n "checking for shared library run path origin... " >&6; } -if ${acl_cv_rpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5 -$as_echo "$acl_cv_rpath" >&6; } - wl="$acl_cv_wl" - acl_libext="$acl_cv_libext" - acl_shlibext="$acl_cv_shlibext" - acl_libname_spec="$acl_cv_libname_spec" - acl_library_names_spec="$acl_cv_library_names_spec" - acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - acl_hardcode_direct="$acl_cv_hardcode_direct" - acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" - # Check whether --enable-rpath was given. -if test "${enable_rpath+set}" = set; then : - enableval=$enable_rpath; : -else - enable_rpath=yes -fi - - - - - acl_libdirstem=lib - acl_libdirstem2= - case "$host_os" in - solaris*) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5 -$as_echo_n "checking for 64-bit host... " >&6; } -if ${gl_cv_solaris_64bit+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef _LP64 -sixtyfour bits -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "sixtyfour bits" >/dev/null 2>&1; then : - gl_cv_solaris_64bit=yes -else - gl_cv_solaris_64bit=no -fi -rm -f conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5 -$as_echo "$gl_cv_solaris_64bit" >&6; } - if test $gl_cv_solaris_64bit = yes; then - acl_libdirstem=lib/64 - case "$host_cpu" in - sparc*) acl_libdirstem2=lib/sparcv9 ;; - i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; - esac - fi - ;; - *) - searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` - if test -n "$searchpath"; then - acl_save_IFS="${IFS= }"; IFS=":" - for searchdir in $searchpath; do - if test -d "$searchdir"; then - case "$searchdir" in - */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; - */../ | */.. ) - # Better ignore directories of this form. They are misleading. - ;; - *) searchdir=`cd "$searchdir" && pwd` - case "$searchdir" in - */lib64 ) acl_libdirstem=lib64 ;; - esac ;; - esac - fi - done - IFS="$acl_save_IFS" - fi - ;; - esac - test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" - - - - - - - - - - - - - use_additional=yes - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - -# Check whether --with-libiconv-prefix was given. -if test "${with_libiconv_prefix+set}" = set; then : - withval=$with_libiconv_prefix; - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - if test "$acl_libdirstem2" != "$acl_libdirstem" \ - && ! test -d "$withval/$acl_libdirstem"; then - additional_libdir="$withval/$acl_libdirstem2" - fi - fi - fi - -fi - - LIBICONV= - LTLIBICONV= - INCICONV= - LIBICONV_PREFIX= - HAVE_LIBICONV= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='iconv ' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" - else - : - fi - else - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - if test "$acl_hardcode_direct" = yes; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - haveit= - for x in $LDFLAGS $LIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" - fi - fi - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = 'iconv'; then - LIBICONV_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = 'iconv'; then - LIBICONV_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INCICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - if test -n "$found_la"; then - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" - ;; - esac - done - fi - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" - else - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - for found_dir in $ltrpathdirs; do - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" - done - fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5 -$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; } -if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then : - $as_echo_n "(cached) " >&6 -else - gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -CFPreferencesCopyAppValue(NULL, NULL) - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - gt_cv_func_CFPreferencesCopyAppValue=yes -else - gt_cv_func_CFPreferencesCopyAppValue=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$gt_save_LIBS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 -$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; } - if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then - -$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h - - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5 -$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; } -if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then : - $as_echo_n "(cached) " >&6 -else - gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -CFLocaleCopyCurrent(); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - gt_cv_func_CFLocaleCopyCurrent=yes -else - gt_cv_func_CFLocaleCopyCurrent=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$gt_save_LIBS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5 -$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; } - if test $gt_cv_func_CFLocaleCopyCurrent = yes; then - -$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h - - fi - INTL_MACOSX_LIBS= - if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then - INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" - fi - - - - - - - LIBINTL= - LTLIBINTL= - POSUB= - - case " $gt_needs " in - *" need-formatstring-macros "*) gt_api_version=3 ;; - *" need-ngettext "*) gt_api_version=2 ;; - *) gt_api_version=1 ;; - esac - gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" - gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" - - if test "$USE_NLS" = "yes"; then - gt_use_preinstalled_gnugettext=no - - - if test $gt_api_version -ge 3; then - gt_revision_test_code=' -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -' - else - gt_revision_test_code= - fi - if test $gt_api_version -ge 2; then - gt_expression_test_code=' + * ngettext ("", "", 0)' - else - gt_expression_test_code= - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5 -$as_echo_n "checking for GNU gettext in libc... " >&6; } -if eval \${$gt_func_gnugettext_libc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -extern int _nl_msg_cat_cntr; -extern int *_nl_domain_bindings; -#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings) -#else -#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 -#endif -$gt_revision_test_code - -int -main () -{ - -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$gt_func_gnugettext_libc=yes" -else - eval "$gt_func_gnugettext_libc=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$gt_func_gnugettext_libc - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - - - - - - am_save_CPPFLAGS="$CPPFLAGS" - - for element in $INCICONV; do - haveit= - for x in $CPPFLAGS; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" - fi - done - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5 -$as_echo_n "checking for iconv... " >&6; } -if ${am_cv_func_iconv+:} false; then : - $as_echo_n "(cached) " >&6 -else - - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include - -int -main () -{ -iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - am_cv_func_iconv=yes -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test "$am_cv_func_iconv" != yes; then - am_save_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include - -int -main () -{ -iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - am_cv_lib_iconv=yes - am_cv_func_iconv=yes -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$am_save_LIBS" - fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5 -$as_echo "$am_cv_func_iconv" >&6; } - if test "$am_cv_func_iconv" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5 -$as_echo_n "checking for working iconv... " >&6; } -if ${am_cv_func_iconv_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - - am_save_LIBS="$LIBS" - if test $am_cv_lib_iconv = yes; then - LIBS="$LIBS $LIBICONV" - fi - am_cv_func_iconv_works=no - for ac_iconv_const in '' 'const'; do - if test "$cross_compiling" = yes; then : - case "$host_os" in - aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; - *) am_cv_func_iconv_works="guessing yes" ;; - esac -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include - -#ifndef ICONV_CONST -# define ICONV_CONST $ac_iconv_const -#endif - -int -main () -{ -int result = 0; - /* Test against AIX 5.1 bug: Failures are not distinguishable from successful - returns. */ - { - iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); - if (cd_utf8_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_utf8_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 1; - iconv_close (cd_utf8_to_88591); - } - } - /* Test against Solaris 10 bug: Failures are not distinguishable from - successful returns. */ - { - iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); - if (cd_ascii_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\263"; - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_ascii_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 2; - iconv_close (cd_ascii_to_88591); - } - } - /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304"; - static char buf[2] = { (char)0xDE, (char)0xAD }; - ICONV_CONST char *inptr = input; - size_t inbytesleft = 1; - char *outptr = buf; - size_t outbytesleft = 1; - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) - result |= 4; - iconv_close (cd_88591_to_utf8); - } - } -#if 0 /* This bug could be worked around by the caller. */ - /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; - char buf[50]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if ((int)res > 0) - result |= 8; - iconv_close (cd_88591_to_utf8); - } - } -#endif - /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is - provided. */ - if (/* Try standardized names. */ - iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) - /* Try IRIX, OSF/1 names. */ - && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) - /* Try AIX names. */ - && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) - /* Try HP-UX names. */ - && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) - result |= 16; - return result; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - am_cv_func_iconv_works=yes -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - test "$am_cv_func_iconv_works" = no || break - done - LIBS="$am_save_LIBS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5 -$as_echo "$am_cv_func_iconv_works" >&6; } - case "$am_cv_func_iconv_works" in - *no) am_func_iconv=no am_cv_lib_iconv=no ;; - *) am_func_iconv=yes ;; - esac - else - am_func_iconv=no am_cv_lib_iconv=no - fi - if test "$am_func_iconv" = yes; then - -$as_echo "#define HAVE_ICONV 1" >>confdefs.h - - fi - if test "$am_cv_lib_iconv" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5 -$as_echo_n "checking how to link with libiconv... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5 -$as_echo "$LIBICONV" >&6; } - else - CPPFLAGS="$am_save_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - - - - - - - - - - - - use_additional=yes - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - -# Check whether --with-libintl-prefix was given. -if test "${with_libintl_prefix+set}" = set; then : - withval=$with_libintl_prefix; - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - if test "$acl_libdirstem2" != "$acl_libdirstem" \ - && ! test -d "$withval/$acl_libdirstem"; then - additional_libdir="$withval/$acl_libdirstem2" - fi - fi - fi - -fi - - LIBINTL= - LTLIBINTL= - INCINTL= - LIBINTL_PREFIX= - HAVE_LIBINTL= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='intl ' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" - else - : - fi - else - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - if test "$acl_hardcode_direct" = yes; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - haveit= - for x in $LDFLAGS $LIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" - fi - fi - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = 'intl'; then - LIBINTL_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = 'intl'; then - LIBINTL_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INCINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - if test -n "$found_la"; then - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" - ;; - esac - done - fi - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" - else - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - for found_dir in $ltrpathdirs; do - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" - done - fi - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5 -$as_echo_n "checking for GNU gettext in libintl... " >&6; } -if eval \${$gt_func_gnugettext_libintl+:} false; then : - $as_echo_n "(cached) " >&6 -else - gt_save_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $INCINTL" - gt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBINTL" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); -#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) -#else -#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 -#endif -$gt_revision_test_code - -int -main () -{ - -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$gt_func_gnugettext_libintl=yes" -else - eval "$gt_func_gnugettext_libintl=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then - LIBS="$LIBS $LIBICONV" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); -#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) -#else -#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 -#endif -$gt_revision_test_code - -int -main () -{ - -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - LIBINTL="$LIBINTL $LIBICONV" - LTLIBINTL="$LTLIBINTL $LTLIBICONV" - eval "$gt_func_gnugettext_libintl=yes" - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - fi - CPPFLAGS="$gt_save_CPPFLAGS" - LIBS="$gt_save_LIBS" -fi -eval ac_res=\$$gt_func_gnugettext_libintl - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - fi - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ - || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ - && test "$PACKAGE" != gettext-runtime \ - && test "$PACKAGE" != gettext-tools; }; then - gt_use_preinstalled_gnugettext=yes - else - LIBINTL= - LTLIBINTL= - INCINTL= - fi - - - - if test -n "$INTL_MACOSX_LIBS"; then - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" - LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" - fi - fi - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - -$as_echo "#define ENABLE_NLS 1" >>confdefs.h - - else - USE_NLS=no - fi - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5 -$as_echo_n "checking whether to use NLS... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 -$as_echo "$USE_NLS" >&6; } - if test "$USE_NLS" = "yes"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5 -$as_echo_n "checking where the gettext function comes from... " >&6; } - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - gt_source="external libintl" - else - gt_source="libc" - fi - else - gt_source="included intl directory" - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5 -$as_echo "$gt_source" >&6; } - fi - - if test "$USE_NLS" = "yes"; then - - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5 -$as_echo_n "checking how to link with libintl... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5 -$as_echo "$LIBINTL" >&6; } - - for element in $INCINTL; do - haveit= - for x in $CPPFLAGS; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" - fi - done - - fi - - -$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h - - -$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h - - fi - - POSUB=po - fi - - - - INTLLIBS="$LIBINTL" - - - - - - - - -# GSettings - - - # Check whether --enable-schemas-compile was given. -if test "${enable_schemas_compile+set}" = set; then : - enableval=$enable_schemas_compile; case ${enableval} in - yes) GSETTINGS_DISABLE_SCHEMAS_COMPILE="" ;; - no) GSETTINGS_DISABLE_SCHEMAS_COMPILE="1" ;; - *) as_fn_error $? "bad value ${enableval} for --enable-schemas-compile" "$LINENO" 5 ;; - esac -fi - - - - - - - - - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. -set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -PKG_CONFIG=$ac_cv_path_PKG_CONFIG -if test -n "$PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 -$as_echo "$PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_path_PKG_CONFIG"; then - ac_pt_PKG_CONFIG=$PKG_CONFIG - # Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $ac_pt_PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG -if test -n "$ac_pt_PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 -$as_echo "$ac_pt_PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_pt_PKG_CONFIG" = x; then - PKG_CONFIG="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - PKG_CONFIG=$ac_pt_PKG_CONFIG - fi -else - PKG_CONFIG="$ac_cv_path_PKG_CONFIG" -fi - -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=0.16 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 -$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - PKG_CONFIG="" - fi -fi - gsettingsschemadir=${datadir}/glib-2.0/schemas - - if test x$cross_compiling != xyes; then - GLIB_COMPILE_SCHEMAS=`$PKG_CONFIG --variable glib_compile_schemas gio-2.0` - else - # Extract the first word of "glib-compile-schemas", so it can be a program name with args. -set dummy glib-compile-schemas; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GLIB_COMPILE_SCHEMAS+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GLIB_COMPILE_SCHEMAS in - [\\/]* | ?:[\\/]*) - ac_cv_path_GLIB_COMPILE_SCHEMAS="$GLIB_COMPILE_SCHEMAS" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GLIB_COMPILE_SCHEMAS="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -GLIB_COMPILE_SCHEMAS=$ac_cv_path_GLIB_COMPILE_SCHEMAS -if test -n "$GLIB_COMPILE_SCHEMAS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_COMPILE_SCHEMAS" >&5 -$as_echo "$GLIB_COMPILE_SCHEMAS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi - - if test "x$GLIB_COMPILE_SCHEMAS" = "x"; then - as_fn_error $? "glib-compile-schemas not found." "$LINENO" 5 - else - : - fi - - GSETTINGS_RULES=' -.PHONY : uninstall-gsettings-schemas install-gsettings-schemas clean-gsettings-schemas - -mostlyclean-am: clean-gsettings-schemas - -gsettings__enum_file = $(addsuffix .enums.xml,$(gsettings_ENUM_NAMESPACE)) - -%.gschema.valid: %.gschema.xml $(gsettings__enum_file) - $(AM_V_GEN) $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$< && mkdir -p $(@D) && touch $@ - -all-am: $(gsettings_SCHEMAS:.xml=.valid) -uninstall-am: uninstall-gsettings-schemas -install-data-am: install-gsettings-schemas - -.SECONDARY: $(gsettings_SCHEMAS) - -install-gsettings-schemas: $(gsettings_SCHEMAS) $(gsettings__enum_file) - @$(NORMAL_INSTALL) - if test -n "$^"; then \ - test -z "$(gsettingsschemadir)" || $(MKDIR_P) "$(DESTDIR)$(gsettingsschemadir)"; \ - $(INSTALL_DATA) $^ "$(DESTDIR)$(gsettingsschemadir)"; \ - test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir); \ - fi - -uninstall-gsettings-schemas: - @$(NORMAL_UNINSTALL) - @list='\''$(gsettings_SCHEMAS) $(gsettings__enum_file)'\''; test -n "$(gsettingsschemadir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e '\''s|^.*/||'\''`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '\''$(DESTDIR)$(gsettingsschemadir)'\'' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(gsettingsschemadir)" && rm -f $$files - test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir) - -clean-gsettings-schemas: - rm -f $(gsettings_SCHEMAS:.xml=.valid) $(gsettings__enum_file) - -ifdef gsettings_ENUM_NAMESPACE -$(gsettings__enum_file): $(gsettings_ENUM_FILES) - $(AM_V_GEN) glib-mkenums --comments '\'''\'' --fhead "" --vhead " <@type@ id='\''$(gsettings_ENUM_NAMESPACE).@EnumName@'\''>" --vprod " " --vtail " " --ftail "" $^ > $@.tmp && mv $@.tmp $@ -endif -' - - - - - - - -# Documentation - - - - - - -YELP_LC_MEDIA_LINKS=true -YELP_LC_DIST=true - -for yelpopt in ; do - case $yelpopt in - lc-media-links) YELP_LC_MEDIA_LINKS=true ;; - no-lc-media-links) YELP_LC_MEDIA_LINKS= ;; - lc-dist) YELP_LC_DIST=true ;; - no-lc-dist) YELP_LC_DIST= ;; - *) as_fn_error $? "Unrecognized YELP_HELP_INIT option $yelpopt\"" "$LINENO" 5 ;; - esac -done; - - - - -# Check whether --with-help-dir was given. -if test "${with_help_dir+set}" = set; then : - withval=$with_help_dir; -else - with_help_dir='${datadir}/help' -fi - -HELP_DIR="$with_help_dir" - - - -# Extract the first word of "itstool", so it can be a program name with args. -set dummy itstool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ITSTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ITSTOOL"; then - ac_cv_prog_ITSTOOL="$ITSTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ITSTOOL="itstool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ITSTOOL=$ac_cv_prog_ITSTOOL -if test -n "$ITSTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ITSTOOL" >&5 -$as_echo "$ITSTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test x"$ITSTOOL" = x; then - as_fn_error $? "itstool not found" "$LINENO" 5 -fi - - -# Extract the first word of "xmllint", so it can be a program name with args. -set dummy xmllint; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_XMLLINT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$XMLLINT"; then - ac_cv_prog_XMLLINT="$XMLLINT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_XMLLINT="xmllint" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -XMLLINT=$ac_cv_prog_XMLLINT -if test -n "$XMLLINT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XMLLINT" >&5 -$as_echo "$XMLLINT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test x"$XMLLINT" = x; then - as_fn_error $? "xmllint not found" "$LINENO" 5 -fi - -YELP_HELP_RULES=' -HELP_ID ?= -HELP_POT ?= -HELP_FILES ?= -HELP_EXTRA ?= -HELP_MEDIA ?= -HELP_LINGUAS ?= - -_HELP_LINGUAS = $(if $(filter environment,$(origin LINGUAS)),$(filter $(LINGUAS),$(HELP_LINGUAS)),$(HELP_LINGUAS)) -_HELP_POTFILE = $(if $(HELP_POT),$(HELP_POT),$(if $(HELP_ID),$(HELP_ID).pot)) -_HELP_POFILES = $(if $(HELP_ID),$(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).po)) -_HELP_MOFILES = $(patsubst %.po,%.mo,$(_HELP_POFILES)) -_HELP_C_FILES = $(foreach f,$(HELP_FILES),C/$(f)) -_HELP_C_EXTRA = $(foreach f,$(HELP_EXTRA),C/$(f)) -_HELP_C_MEDIA = $(foreach f,$(HELP_MEDIA),C/$(f)) -_HELP_LC_FILES = $(foreach lc,$(_HELP_LINGUAS),$(foreach f,$(HELP_FILES),$(lc)/$(f))) -_HELP_LC_STAMPS = $(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).stamp) - -_HELP_DEFAULT_V = $(if $(AM_DEFAULT_VERBOSITY),$(AM_DEFAULT_VERBOSITY),1) -_HELP_V = $(if $(V),$(V),$(_HELP_DEFAULT_V)) -_HELP_LC_VERBOSE = $(_HELP_LC_VERBOSE_$(_HELP_V)) -_HELP_LC_VERBOSE_ = $(_HELP_LC_VERBOSE_$(_HELP_DEFAULT_V)) -_HELP_LC_VERBOSE_0 = @echo " GEN "$(dir $@); - -all: $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) $(_HELP_LC_FILES) $(_HELP_POFILES) - -.PHONY: pot -pot: $(_HELP_POTFILE) -$(_HELP_POTFILE): $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) - $(AM_V_GEN)if test -d "C"; then d=; else d="$(srcdir)/"; fi; \ - $(ITSTOOL) -o "$@" $(foreach f,$(_HELP_C_FILES),"$${d}$(f)") - -.PHONY: repo -repo: $(_HELP_POTFILE) - $(AM_V_at)for po in $(_HELP_POFILES); do \ - if test "x$(_HELP_V)" = "x0"; then echo " GEN $${po}"; fi; \ - msgmerge -q -o "$${po}" "$${po}" "$(_HELP_POTFILE)"; \ - done - -$(_HELP_POFILES): - $(AM_V_at)if ! test -d "$(dir $@)"; then mkdir "$(dir $@)"; fi - $(AM_V_at)if test ! -f "$@" -a -f "$(srcdir)/$@"; then cp "$(srcdir)/$@" "$@"; fi - $(AM_V_GEN)if ! test -f "$@"; then \ - (cd "$(dir $@)" && \ - $(ITSTOOL) -o "$(notdir $@).tmp" $(_HELP_C_FILES) && \ - mv "$(notdir $@).tmp" "$(notdir $@)"); \ - else \ - (cd "$(dir $@)" && \ - $(ITSTOOL) -o "$(notdir $@).tmp" $(_HELP_C_FILES) && \ - msgmerge -o "$(notdir $@)" "$(notdir $@)" "$(notdir $@).tmp" && \ - rm "$(notdir $@).tmp"); \ - fi - -$(_HELP_MOFILES): %.mo: %.po - $(AM_V_at)if ! test -d "$(dir $@)"; then mkdir "$(dir $@)"; fi - $(AM_V_GEN)msgfmt -o "$@" "$<" - -$(_HELP_LC_FILES): $(_HELP_LINGUAS) -$(_HELP_LINGUAS): $(_HELP_LC_STAMPS) -$(_HELP_LC_STAMPS): %.stamp: %.mo -$(_HELP_LC_STAMPS): $(_HELP_C_FILES) $(_HELP_C_EXTRA) - $(AM_V_at)if ! test -d "$(dir $@)"; then mkdir "$(dir $@)"; fi - $(_HELP_LC_VERBOSE)if test -d "C"; then d="../"; else d="$(abs_srcdir)/"; fi; \ - mo="$(dir $@)$(patsubst %/$(notdir $@),%,$@).mo"; \ - if test -f "$${mo}"; then mo="../$${mo}"; else mo="$(abs_srcdir)/$${mo}"; fi; \ - (cd "$(dir $@)" && $(ITSTOOL) -m "$${mo}" $(foreach f,$(_HELP_C_FILES),$${d}/$(f))) && \ - touch "$@" - -.PHONY: clean-help -mostlyclean-am: $(if $(HELP_ID),clean-help) -clean-help: - rm -f $(_HELP_LC_FILES) $(_HELP_LC_STAMPS) $(_HELP_MOFILES) - -EXTRA_DIST ?= -EXTRA_DIST += $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) -EXTRA_DIST += $(if $(YELP_LC_DIST),$(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).stamp)) -EXTRA_DIST += $(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).po) -EXTRA_DIST += $(foreach f,$(HELP_MEDIA),$(foreach lc,$(HELP_LINGUAS),$(wildcard $(lc)/$(f)))) - -distdir: distdir-help-files -distdir-help-files: $(_HELP_LC_FILES) - @for lc in C $(if $(YELP_LC_DIST),$(HELP_LINGUAS)) ; do \ - $(MKDIR_P) "$(distdir)/$$lc"; \ - for file in $(HELP_FILES); do \ - if test -f "$$lc/$$file"; then d=./; else d=$(srcdir)/; fi; \ - cp -p "$$d$$lc/$$file" "$(distdir)/$$lc/" || exit 1; \ - done; \ - done; \ - -.PHONY: check-help -check: check-help -check-help: - for lc in C $(_HELP_LINGUAS); do \ - if test -d "$$lc"; \ - then d=; \ - xmlpath="$$lc"; \ - else \ - d="$(srcdir)/"; \ - xmlpath="$$lc:$(srcdir)/$$lc"; \ - fi; \ - for page in $(HELP_FILES); do \ - echo "$(XMLLINT) --noout --noent --path $$xmlpath --xinclude $$d$$lc/$$page"; \ - $(XMLLINT) --noout --noent --path "$$xmlpath" --xinclude "$$d$$lc/$$page"; \ - done; \ - done - - -.PHONY: install-help -install-data-am: $(if $(HELP_ID),install-help) -install-help: $(_HELP_LC_FILES) - @for lc in C $(_HELP_LINGUAS); do \ - $(mkinstalldirs) "$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)" || exit 1; \ - done - @for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \ - if test -f "$$lc/$$f"; then d=; else d="$(srcdir)/"; fi; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \ - echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir`basename $$f`"; \ - $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir`basename $$f`" || exit 1; \ - done; done - @for f in $(_HELP_C_EXTRA); do \ - lc=`dirname "$$f"`; lc=`basename "$$lc"`; \ - if test -f "$$f"; then d=; else d="$(srcdir)/"; fi; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \ - echo "$(INSTALL_DATA) $$d$$f $$helpdir`basename $$f`"; \ - $(INSTALL_DATA) "$$d$$f" "$$helpdir`basename $$f`" || exit 1; \ - done - @for f in $(HELP_MEDIA); do \ - for lc in C $(_HELP_LINGUAS); do \ - if test -f "$$lc$$f"; then d=; else d="$(srcdir)/"; fi; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - mdir=`dirname "$$f"`; \ - if test "x$mdir" = "x."; then mdir=""; fi; \ - if ! test -d "$$helpdir$$mdir"; then $(mkinstalldirs) "$$helpdir$$mdir"; fi; \ - if test -f "$$d$$lc/$$f"; then \ - echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir$$f"; \ - $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir$$f" || exit 1; \ - elif test "x$$lc" != "xC"; then \ - if test "x$(YELP_LC_MEDIA_LINKS)" != "x"; then \ - echo "$(LN_S) -f $(HELP_DIR)/C/$(HELP_ID)/$$f $$helpdir$$f"; \ - $(LN_S) -f "$(HELP_DIR)/C/$(HELP_ID)/$$f" "$$helpdir$$f" || exit 1; \ - fi; \ - fi; \ - done; \ - done - -.PHONY: uninstall-help -uninstall-am: $(if $(HELP_ID),uninstall-help) -uninstall-help: - for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - echo "rm -f $$helpdir`basename $$f`"; \ - rm -f "$$helpdir`basename $$f`"; \ - done; done - @for f in $(_HELP_C_EXTRA); do \ - lc=`dirname "$$f"`; lc=`basename "$$lc"`; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - echo "rm -f $$helpdir`basename $$f`"; \ - rm -f "$$helpdir`basename $$f`"; \ - done - @for f in $(HELP_MEDIA); do \ - for lc in C $(_HELP_LINGUAS); do \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - echo "rm -f $$helpdir$$f"; \ - rm -f "$$helpdir$$f"; \ - done; \ - done; -' - - - - -# AppData - - - # Check whether --enable-appstream-util was given. -if test "${enable_appstream_util+set}" = set; then : - enableval=$enable_appstream_util; -fi - - - if test "x$enable_appstream_validate" != "xno"; then : - # Extract the first word of "appstream-util", so it can be a program name with args. -set dummy appstream-util; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_APPSTREAM_UTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $APPSTREAM_UTIL in - [\\/]* | ?:[\\/]*) - ac_cv_path_APPSTREAM_UTIL="$APPSTREAM_UTIL" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_APPSTREAM_UTIL="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -APPSTREAM_UTIL=$ac_cv_path_APPSTREAM_UTIL -if test -n "$APPSTREAM_UTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $APPSTREAM_UTIL" >&5 -$as_echo "$APPSTREAM_UTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - if test "x$APPSTREAM_UTIL" = "x"; then : - have_appstream_validate=no -else - have_appstream_validate=yes - -fi -else - have_appstream_validate=no -fi - - if test "x$have_appstream_validate" != "xno"; then : - appstream_validate=yes -else - appstream_validate=no - if test "x$enable_appstream_validate" = "xyes"; then : - as_fn_error $? "AppData validation was requested but appstream-util was not found" "$LINENO" 5 -fi -fi - - appstreamxmldir=${datadir}/appdata - - - APPSTREAM_XML_RULES=' -.PHONY : uninstall-appstream-xml install-appstream-xml clean-appstream-xml - -mostlyclean-am: clean-appstream-xml - -%.appdata.valid: %.appdata.xml - $(AM_V_GEN) if test -f "$<"; then d=; else d="$(srcdir)/"; fi; \ - if test -n "$(APPSTREAM_UTIL)"; \ - then $(APPSTREAM_UTIL) --nonet validate $${d}$<; fi \ - && touch $@ - -check-am: $(appstream_XML:.appdata.xml=.appdata.valid) -uninstall-am: uninstall-appstream-xml -install-data-am: install-appstream-xml - -.SECONDARY: $(appstream_XML) - -install-appstream-xml: $(appstream_XML) - @$(NORMAL_INSTALL) - if test -n "$^"; then \ - test -z "$(appstreamxmldir)" || $(MKDIR_P) "$(DESTDIR)$(appstreamxmldir)"; \ - $(INSTALL_DATA) $^ "$(DESTDIR)$(appstreamxmldir)"; \ - fi - -uninstall-appstream-xml: - @$(NORMAL_UNINSTALL) - @list='\''$(appstream_XML)'\''; test -n "$(appstreamxmldir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e '\''s|^.*/||'\''`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '\''$(DESTDIR)$(appstreamxmldir)'\'' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(appstreamxmldir)" && rm -f $$files - -clean-appstream-xml: - rm -f $(appstream_XML:.appdata.xml=.appdata.valid) -' - - - - - - - - - # Find git, defaulting to the 'missing' script so the user gets a nice - # message if git is missing, rather than a plain 'command not found'. - # Extract the first word of "git", so it can be a program name with args. -set dummy git; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GIT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GIT="$GIT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GIT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GIT" && ac_cv_path_GIT="${am_missing_run}git" - ;; -esac -fi -GIT=$ac_cv_path_GIT -if test -n "$GIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GIT" >&5 -$as_echo "$GIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - - # Build the ChangeLog rules. - -GENERATE_CHANGELOG_RULES=' -# Generate ChangeLog -# -# Optional: -# - CHANGELOG_START: git commit ID or tag name to output changelogs from -# (exclusive). (Default: include all commits) -# - CHANGELOG_GIT_FLAGS: General flags to pass to git-log when generating the -# ChangeLog. (Default: various) -# - CHANGELOG_GIT_DIR: .git directory to use. (Default: $(top_srcdir)/.git) - -# git-specific -CHANGELOG_GIT_FLAGS ?= --stat -M -C --name-status --no-color --no-decorate -CHANGELOG_GIT_DIR ?= $(top_srcdir)/.git - -ifeq ($(CHANGELOG_START),) -CHANGELOG_GIT_RANGE = -else -CHANGELOG_GIT_RANGE = $(CHANGELOG_START).. -endif - -# Generate a ChangeLog in $(top_distdir) -dist-ChangeLog: - $(AM_V_GEN)if $(GIT) \ - --git-dir=$(CHANGELOG_GIT_DIR) --work-tree=$(top_srcdir) log \ - $(CHANGELOG_GIT_FLAGS) $(CHANGELOG_GIT_RANGE) \ - | fmt --split-only >.ChangeLog.tmp; \ - then mv -f .ChangeLog.tmp "$(top_distdir)/ChangeLog"; \ - else rm -f .ChangeLog.tmp; exit 1; fi - -.PHONY: dist-ChangeLog -' - - - - - -# Dependencies -for ac_func in atexit -do : - ac_fn_c_check_func "$LINENO" "atexit" "ac_cv_func_atexit" -if test "x$ac_cv_func_atexit" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_ATEXIT 1 -_ACEOF - -fi -done - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GENERAL" >&5 -$as_echo_n "checking for GENERAL... " >&6; } - -if test -n "$GENERAL_CFLAGS"; then - pkg_cv_GENERAL_CFLAGS="$GENERAL_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" - glib-2.0 - gio-2.0 >= 2.32 - gtk+-3.0 >= 3.15.0 - gmodule-2.0 cairo >= 1.4 -\""; } >&5 - ($PKG_CONFIG --exists --print-errors " - glib-2.0 - gio-2.0 >= 2.32 - gtk+-3.0 >= 3.15.0 - gmodule-2.0 cairo >= 1.4 -") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GENERAL_CFLAGS=`$PKG_CONFIG --cflags " - glib-2.0 - gio-2.0 >= 2.32 - gtk+-3.0 >= 3.15.0 - gmodule-2.0 cairo >= 1.4 -" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$GENERAL_LIBS"; then - pkg_cv_GENERAL_LIBS="$GENERAL_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" - glib-2.0 - gio-2.0 >= 2.32 - gtk+-3.0 >= 3.15.0 - gmodule-2.0 cairo >= 1.4 -\""; } >&5 - ($PKG_CONFIG --exists --print-errors " - glib-2.0 - gio-2.0 >= 2.32 - gtk+-3.0 >= 3.15.0 - gmodule-2.0 cairo >= 1.4 -") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GENERAL_LIBS=`$PKG_CONFIG --libs " - glib-2.0 - gio-2.0 >= 2.32 - gtk+-3.0 >= 3.15.0 - gmodule-2.0 cairo >= 1.4 -" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - GENERAL_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs " - glib-2.0 - gio-2.0 >= 2.32 - gtk+-3.0 >= 3.15.0 - gmodule-2.0 cairo >= 1.4 -" 2>&1` - else - GENERAL_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs " - glib-2.0 - gio-2.0 >= 2.32 - gtk+-3.0 >= 3.15.0 - gmodule-2.0 cairo >= 1.4 -" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$GENERAL_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements ( - glib-2.0 - gio-2.0 >= 2.32 - gtk+-3.0 >= 3.15.0 - gmodule-2.0 cairo >= 1.4 -) were not met: - -$GENERAL_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables GENERAL_CFLAGS -and GENERAL_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables GENERAL_CFLAGS -and GENERAL_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details" "$LINENO" 5; } -else - GENERAL_CFLAGS=$pkg_cv_GENERAL_CFLAGS - GENERAL_LIBS=$pkg_cv_GENERAL_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - -# GTK+ prefix for gtkbuilder.rng - -if test -n "$GTK_PREFIX"; then - pkg_cv_GTK_PREFIX="$GTK_PREFIX" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "gtk+-3.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GTK_PREFIX=`$PKG_CONFIG --variable="prefix" "gtk+-3.0" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -GTK_PREFIX=$pkg_cv_GTK_PREFIX - -if test "x$GTK_PREFIX" = x""; then : - -fi -# Extract the first word of "xmllint", so it can be a program name with args. -set dummy xmllint; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_XMLLINT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $XMLLINT in - [\\/]* | ?:[\\/]*) - ac_cv_path_XMLLINT="$XMLLINT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_XMLLINT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -XMLLINT=$ac_cv_path_XMLLINT -if test -n "$XMLLINT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XMLLINT" >&5 -$as_echo "$XMLLINT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - -# Desktop file validation -# Extract the first word of "desktop-file-validate", so it can be a program name with args. -set dummy desktop-file-validate; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_DESKTOP_FILE_VALIDATE+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $DESKTOP_FILE_VALIDATE in - [\\/]* | ?:[\\/]*) - ac_cv_path_DESKTOP_FILE_VALIDATE="$DESKTOP_FILE_VALIDATE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_DESKTOP_FILE_VALIDATE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -DESKTOP_FILE_VALIDATE=$ac_cv_path_DESKTOP_FILE_VALIDATE -if test -n "$DESKTOP_FILE_VALIDATE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DESKTOP_FILE_VALIDATE" >&5 -$as_echo "$DESKTOP_FILE_VALIDATE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - -# Output! -ac_config_files="$ac_config_files Makefile po/Makefile.in help/Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 -$as_echo_n "checking that generated files are newer than configure... " >&6; } - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 -$as_echo "done" >&6; } - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${CODE_COVERAGE_ENABLED_TRUE}" && test -z "${CODE_COVERAGE_ENABLED_FALSE}"; then - as_fn_error $? "conditional \"CODE_COVERAGE_ENABLED\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by Hitori $as_me 3.22.4, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to . -Hitori home page: ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -Hitori config.status 3.22.4 -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' -SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' -host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' -lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' -reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' -want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' -DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' -sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' -AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' -STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' -nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' -lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' -lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' -objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`' -configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' - -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in SHELL \ -ECHO \ -PATH_SEPARATOR \ -SED \ -GREP \ -EGREP \ -FGREP \ -LD \ -NM \ -LN_S \ -lt_SP2NL \ -lt_NL2SP \ -reload_flag \ -OBJDUMP \ -deplibs_check_method \ -file_magic_cmd \ -file_magic_glob \ -want_nocaseglob \ -DLLTOOL \ -sharedlib_from_linklib_cmd \ -AR \ -AR_FLAGS \ -archiver_list_spec \ -STRIP \ -RANLIB \ -CC \ -CFLAGS \ -compiler \ -lt_cv_sys_global_symbol_pipe \ -lt_cv_sys_global_symbol_to_cdecl \ -lt_cv_sys_global_symbol_to_import \ -lt_cv_sys_global_symbol_to_c_name_address \ -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -lt_cv_nm_interface \ -nm_file_list_spec \ -lt_cv_truncate_bin \ -lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_pic \ -lt_prog_compiler_wl \ -lt_prog_compiler_static \ -lt_cv_prog_compiler_c_o \ -need_locks \ -MANIFEST_TOOL \ -DSYMUTIL \ -NMEDIT \ -LIPO \ -OTOOL \ -OTOOL64 \ -shrext_cmds \ -export_dynamic_flag_spec \ -whole_archive_flag_spec \ -compiler_needs_object \ -with_gnu_ld \ -allow_undefined_flag \ -no_undefined_flag \ -hardcode_libdir_flag_spec \ -hardcode_libdir_separator \ -exclude_expsyms \ -include_expsyms \ -file_list_spec \ -variables_saved_for_relink \ -libname_spec \ -library_names_spec \ -soname_spec \ -install_override_mode \ -finish_eval \ -old_striplib \ -striplib; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postlink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -configure_time_dlsearch_path \ -configure_time_lt_sys_library_path; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -ac_aux_dir='$ac_aux_dir' - -# See if we are running on zsh, and set the options that allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='$PACKAGE' - VERSION='$VERSION' - RM='$RM' - ofile='$ofile' - - - -# Capture the value of obsolete ALL_LINGUAS because we need it to compute - # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it - # from automake < 1.5. - eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' - # Capture the value of LINGUAS because we need it to compute CATALOGS. - LINGUAS="${LINGUAS-%UNSET%}" - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; - "help/Makefile") CONFIG_FILES="$CONFIG_FILES help/Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "libtool":C) - - # See if we are running on zsh, and set the options that allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST - fi - - cfgfile=${ofile}T - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL -# Generated automatically by $as_me ($PACKAGE) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. - -# Provide generalized library-building support services. -# Written by Gordon Matzigkeit, 1996 - -# Copyright (C) 2014 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program or library that is built -# using GNU Libtool, you may include this file under the same -# distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - - -# The names of the tagged configurations supported by this script. -available_tags='' - -# Configured defaults for sys_lib_dlsearch_path munging. -: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} - -# ### BEGIN LIBTOOL CONFIG - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# Shared archive member basename,for filename based shared library versioning on AIX. -shared_archive_member_spec=$shared_archive_member_spec - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that protects backslashes. -ECHO=$lt_ECHO - -# The PATH separator for the build system. -PATH_SEPARATOR=$lt_PATH_SEPARATOR - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# convert \$build file names to \$host format. -to_host_file_cmd=$lt_cv_to_host_file_cmd - -# convert \$build files to toolchain format. -to_tool_file_cmd=$lt_cv_to_tool_file_cmd - -# An object symbol dumper. -OBJDUMP=$lt_OBJDUMP - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method = "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# How to find potential files when deplibs_check_method = "file_magic". -file_magic_glob=$lt_file_magic_glob - -# Find potential files using nocaseglob when deplibs_check_method = "file_magic". -want_nocaseglob=$lt_want_nocaseglob - -# DLL creation program. -DLLTOOL=$lt_DLLTOOL - -# Command to associate shared and link libraries. -sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd - -# The archiver. -AR=$lt_AR - -# Flags to create an archive. -AR_FLAGS=$lt_AR_FLAGS - -# How to feed a file listing to the archiver. -archiver_list_spec=$lt_archiver_list_spec - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Whether to use a lock for old archive extraction. -lock_old_archive_extraction=$lock_old_archive_extraction - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm into a list of symbols to manually relocate. -global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# The name lister interface. -nm_interface=$lt_lt_cv_nm_interface - -# Specify filename containing input files for \$NM. -nm_file_list_spec=$lt_nm_file_list_spec - -# The root where to search for dependent libraries,and where our libraries should be installed. -lt_sysroot=$lt_sysroot - -# Command to truncate a binary pipe. -lt_truncate_bin=$lt_lt_cv_truncate_bin - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Manifest tool. -MANIFEST_TOOL=$lt_MANIFEST_TOOL - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Permission mode override for installation of shared libraries. -install_override_mode=$lt_install_override_mode - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Detected run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path - -# Explicit LT_SYS_LIBRARY_PATH set during ./configure time. -configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \$shlibpath_var if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - cat <<'_LT_EOF' >> "$cfgfile" - -# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE - -# func_munge_path_list VARIABLE PATH -# ----------------------------------- -# VARIABLE is name of variable containing _space_ separated list of -# directories to be munged by the contents of PATH, which is string -# having a format: -# "DIR[:DIR]:" -# string "DIR[ DIR]" will be prepended to VARIABLE -# ":DIR[:DIR]" -# string "DIR[ DIR]" will be appended to VARIABLE -# "DIRP[:DIRP]::[DIRA:]DIRA" -# string "DIRP[ DIRP]" will be prepended to VARIABLE and string -# "DIRA[ DIRA]" will be appended to VARIABLE -# "DIR[:DIR]" -# VARIABLE will be replaced by "DIR[ DIR]" -func_munge_path_list () -{ - case x$2 in - x) - ;; - *:) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" - ;; - x:*) - eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" - ;; - *::*) - eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" - eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" - ;; - *) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" - ;; - esac -} - - -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -func_cc_basename () -{ - for cc_temp in $*""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac - done - func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -} - - -# ### END FUNCTIONS SHARED WITH CONFIGURE - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test set != "${COLLECT_NAMES+set}"; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain=$ac_aux_dir/ltmain.sh - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - "po-directories":C) - for ac_file in $CONFIG_FILES; do - # Support "outfile[:infile[:infile...]]" - case "$ac_file" in - *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - esac - # PO directories have a Makefile.in generated from Makefile.in.in. - case "$ac_file" in */Makefile.in) - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - # Treat a directory as a PO directory if and only if it has a - # POTFILES.in file. This allows packages to have multiple PO - # directories under different names or in different locations. - if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then - rm -f "$ac_dir/POTFILES" - test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" - gt_tab=`printf '\t'` - cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" - POMAKEFILEDEPS="POTFILES.in" - # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend - # on $ac_dir but don't depend on user-specified configuration - # parameters. - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - if test -n "$OBSOLETE_ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` - # Hide the ALL_LINGUAS assignment from automake < 1.5. - eval 'ALL_LINGUAS''=$ALL_LINGUAS_' - POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" - else - # The set of available languages was given in configure.in. - # Hide the ALL_LINGUAS assignment from automake < 1.5. - eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' - fi - # Compute POFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) - # Compute UPDATEPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) - # Compute DUMMYPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) - # Compute GMOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - UPDATEPOFILES= - DUMMYPOFILES= - GMOFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - done - fi - test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" - sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" - for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do - if test -f "$f"; then - case "$f" in - *.orig | *.bak | *~) ;; - *) cat "$f" >> "$ac_dir/Makefile" ;; - esac - fi - done - fi - ;; - esac - done ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff -Nru hitori-3.22.4/configure.ac hitori-3.31.0/configure.ac --- hitori-3.22.4/configure.ac 2017-10-02 08:05:38.000000000 +0000 +++ hitori-3.31.0/configure.ac 1970-01-01 00:00:00.000000000 +0000 @@ -1,64 +0,0 @@ -AC_INIT([Hitori],[3.22.4],[https://bugzilla.gnome.org/enter_bug.cgi?product=hitori],[hitori],[https://wiki.gnome.org/Apps/Hitori]) -AX_IS_RELEASE([git-directory]) - -AM_INIT_AUTOMAKE([check-news dist-xz no-dist-gzip subdir-objects]) -AC_CONFIG_HEADERS([config.h]) -AC_CONFIG_MACRO_DIR([m4]) -AM_MAINTAINER_MODE([enable]) - -# Options -AX_CHECK_ENABLE_DEBUG([yes],[DEBUG]) - -AC_PROG_CC -AM_PROG_CC_C_O -AC_PROG_CPP -LT_INIT - -m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])]) - -AX_COMPILER_FLAGS([WARN_CFLAGS],[WARN_LDFLAGS]) - -# Code coverage -AX_CODE_COVERAGE() - -# GResources -AC_PATH_PROG([GLIB_COMPILE_RESOURCES],[glib-compile-resources]) - -# Internationalisation -AM_GNU_GETTEXT([external]) -AM_GNU_GETTEXT_VERSION([0.19.8]) - -# GSettings -GLIB_GSETTINGS - -# Documentation -YELP_HELP_INIT - -# AppData -APPSTREAM_XML - -AX_GENERATE_CHANGELOG - -# Dependencies -AC_CHECK_FUNCS([atexit]) -PKG_CHECK_MODULES([GENERAL],[ - glib-2.0 - gio-2.0 >= 2.32 - gtk+-3.0 >= 3.15.0 - gmodule-2.0 cairo >= 1.4 -]) - -# GTK+ prefix for gtkbuilder.rng -PKG_CHECK_VAR([GTK_PREFIX],[gtk+-3.0],[prefix]) -AC_PATH_PROG([XMLLINT],[xmllint]) - -# Desktop file validation -AC_PATH_PROG([DESKTOP_FILE_VALIDATE],[desktop-file-validate]) - -# Output! -AC_CONFIG_FILES([ -Makefile -po/Makefile.in -help/Makefile -]) -AC_OUTPUT diff -Nru hitori-3.22.4/data/hitori-menus.ui hitori-3.31.0/data/hitori-menus.ui --- hitori-3.22.4/data/hitori-menus.ui 2016-12-20 13:30:40.000000000 +0000 +++ hitori-3.31.0/data/hitori-menus.ui 1970-01-01 00:00:00.000000000 +0000 @@ -1,64 +0,0 @@ - - - - -
- - app.new-game - _New Game - <Primary>n - - - Board _Size -
- - app.board-size - 5×5 - 5 - - - app.board-size - 6×6 - 6 - - - app.board-size - 7×7 - 7 - - - app.board-size - 8×8 - 8 - - - app.board-size - 9×9 - 9 - - - app.board-size - 10×10 - 10 - -
- -
-
- - app.help - _Help - F1 - - - app.about - _About - - - app.quit - _Quit - <Primary>q - -
- - diff -Nru hitori-3.22.4/data/hitori.ui hitori-3.31.0/data/hitori.ui --- hitori-3.22.4/data/hitori.ui 2016-12-20 13:30:40.000000000 +0000 +++ hitori-3.31.0/data/hitori.ui 2019-02-19 16:41:30.000000000 +0000 @@ -2,6 +2,61 @@ + +
+ + app.new-game + _New Game + <Primary>n + + + Board _Size +
+ + app.board-size + 5×5 + 5 + + + app.board-size + 6×6 + 6 + + + app.board-size + 7×7 + 7 + + + app.board-size + 8×8 + 8 + + + app.board-size + 9×9 + 9 + + + app.board-size + 10×10 + 10 + +
+ +
+
+ + app.help + _Help + F1 + + + app.about + _About Hitori + +
+ False @@ -64,6 +119,28 @@ + + True + center + True + False + primary-menu + + + + True + open-menu-symbolic + 1 + + + + + end + + + True False diff -Nru hitori-3.22.4/data/icons/meson.build hitori-3.31.0/data/icons/meson.build --- hitori-3.22.4/data/icons/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/data/icons/meson.build 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1,13 @@ +sizes = ['16x16', '22x22', '32x32', '48x48'] + +foreach size: sizes + install_data( + join_paths(size, application_id + '.png'), + install_dir: join_paths(get_option('datadir'), 'icons', 'hicolor', size, 'apps') + ) +endforeach + +install_data( + join_paths('symbolic', application_id + '-symbolic.svg'), + install_dir: join_paths(get_option('datadir'), 'icons', 'hicolor', 'symbolic', 'apps') +) \ No newline at end of file diff -Nru hitori-3.22.4/data/meson.build hitori-3.31.0/data/meson.build --- hitori-3.22.4/data/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/data/meson.build 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1,57 @@ +subdir('icons') + +desktop_file = i18n.merge_file('desktop-file', + type: 'desktop', + input: '@0@.desktop.in'.format(application_id), + output: '@0@.desktop'.format(application_id), + po_dir: join_paths(meson.source_root(), 'po'), + install: true, + install_dir: join_paths(get_option('datadir'), 'applications'), +) + +desktop_file_validate = find_program('desktop-file-validate', required: false) +if desktop_file_validate.found() + test( + 'validate-desktop', + desktop_file_validate, + args: [ + desktop_file.full_path(), + ], + ) +endif + +appdata_file = i18n.merge_file('appdata-file', + input: '@0@.appdata.xml.in'.format(application_id), + output: '@0@.appdata.xml'.format(application_id), + po_dir: join_paths(meson.source_root(), 'po'), + install: true, + install_dir: join_paths(get_option('datadir'), 'metainfo'), +) + +appstream_util = find_program('appstream-util', required: false) +if appstream_util.found() + test( + 'validate-appdata', appstream_util, + args: [ + 'validate-relax', '--nonet', appdata_file.full_path(), + ], + ) +endif + +install_data( + 'org.gnome.hitori.gschema.xml', + install_dir: join_paths(get_option('datadir'), 'glib-2.0', 'schemas'), +) + +xmllint = find_program('xmllint', required: false) +if xmllint.found() + gtk_prefix = gtk_dependency.get_pkgconfig_variable('prefix') + test( + 'validate-ui', xmllint, + args: [ + '--nonet', '--noblanks', '--noout', + '--relaxng', join_paths(gtk_prefix, 'share', 'gtk-3.0', 'gtkbuilder.rng'), + files('hitori.ui'), + ], + ) +endif diff -Nru hitori-3.22.4/data/org.gnome.Hitori.appdata.xml.in hitori-3.31.0/data/org.gnome.Hitori.appdata.xml.in --- hitori-3.22.4/data/org.gnome.Hitori.appdata.xml.in 2017-10-02 07:39:18.000000000 +0000 +++ hitori-3.31.0/data/org.gnome.Hitori.appdata.xml.in 2019-02-19 16:41:30.000000000 +0000 @@ -1,7 +1,7 @@ - org.gnome.Hitori.desktop + org.gnome.Hitori CC-BY-SA-3.0 GPL-3.0+ and CC-BY-SA-3.0 @@ -27,13 +27,18 @@ https://people.gnome.org/~mcatanzaro/hitori.png + + hitori + + org.gnome.Hitori.desktop https://wiki.gnome.org/Apps/Hitori - https://bugzilla.gnome.org/enter_bug.cgi?product=hitori + https://gitlab.gnome.org/GNOME/hitori/issues http://www.gnome.org/friends/ https://help.gnome.org/users/hitori/stable/ https://wiki.gnome.org/TranslationProject/LocalisationGuide philip_at_tecnocode.co.uk GNOME + The GNOME Project AppMenu HighContrast @@ -41,6 +46,11 @@ UserDocs hitori + + + + + none none diff -Nru hitori-3.22.4/debian/changelog hitori-3.31.0/debian/changelog --- hitori-3.22.4/debian/changelog 2017-10-13 22:48:50.000000000 +0000 +++ hitori-3.31.0/debian/changelog 2019-02-24 00:21:19.000000000 +0000 @@ -1,3 +1,15 @@ +hitori (3.31.0-1) unstable; urgency=medium + + * Team upload. + * New upstream version 3.31.0. + * Remove get-orig-source target. + * Declare compliance with Debian Policy 4.3.0. + * Use canonical VCS URI. + * Switch to compat level 12. + * Build-depend on meson. + + -- Markus Koschany Sun, 24 Feb 2019 01:21:19 +0100 + hitori (3.22.4-1) unstable; urgency=medium * Team upload. @@ -108,7 +120,7 @@ * New upstream version. * License change: the documentation license is now - Creative Commons Attribution-ShareAlike 3.0 unported. + Creative Commons Attribution-ShareAlike 3.0 unported. * Switch to dpkg-source 3.0 (quilt) format. * Bumped Standards-Version to 3.9.2. No changes needed. @@ -120,7 +132,7 @@ - Fixed bug in solution verification. (Closes: #552510) * Added missing build-dependency on docbook-xml. * Removed obsolete dh_scrollkeeper call. - * Bumped Standards-Version to 3.8.3. No changes needed. + * Bumped Standards-Version to 3.8.3. No changes needed. -- Peter De Wachter Sat, 07 Nov 2009 22:15:11 +0100 diff -Nru hitori-3.22.4/debian/compat hitori-3.31.0/debian/compat --- hitori-3.22.4/debian/compat 2017-10-13 22:48:50.000000000 +0000 +++ hitori-3.31.0/debian/compat 2019-02-24 00:21:19.000000000 +0000 @@ -1 +1 @@ -10 +12 diff -Nru hitori-3.22.4/debian/control hitori-3.31.0/debian/control --- hitori-3.22.4/debian/control 2017-10-13 22:48:50.000000000 +0000 +++ hitori-3.31.0/debian/control 2019-02-24 00:21:19.000000000 +0000 @@ -4,14 +4,15 @@ Maintainer: Debian Games Team Uploaders: Peter De Wachter Build-Depends: - debhelper (>= 10), + debhelper (>= 12), desktop-file-utils, libgtk-3-dev (>= 3.15.0), + meson, yelp-tools -Standards-Version: 4.1.1 +Standards-Version: 4.3.0 Homepage: https://wiki.gnome.org/Apps/Hitori -Vcs-Git: https://anonscm.debian.org/git/pkg-games/hitori.git -Vcs-Browser: https://anonscm.debian.org/git/pkg-games/hitori.git +Vcs-Git: https://salsa.debian.org/games-team/hitori.git +Vcs-Browser: https://salsa.debian.org/games-team/hitori Package: hitori Architecture: any diff -Nru hitori-3.22.4/debian/copyright hitori-3.31.0/debian/copyright --- hitori-3.22.4/debian/copyright 2017-10-13 22:48:50.000000000 +0000 +++ hitori-3.31.0/debian/copyright 2019-02-24 00:21:19.000000000 +0000 @@ -19,7 +19,7 @@ Copyright: 2009-2013, Peter De Wachter 2014, Vincent Cheng 2014-2015, Jackson Doak - 2016-2017, Markus Koschany + 2016-2019, Markus Koschany License: GPL-3+ License: GPL-3+ diff -Nru hitori-3.22.4/debian/docs hitori-3.31.0/debian/docs --- hitori-3.22.4/debian/docs 2017-10-13 22:48:50.000000000 +0000 +++ hitori-3.31.0/debian/docs 2019-02-24 00:21:19.000000000 +0000 @@ -1,2 +1 @@ NEWS -README diff -Nru hitori-3.22.4/debian/rules hitori-3.31.0/debian/rules --- hitori-3.22.4/debian/rules 2017-10-13 22:48:50.000000000 +0000 +++ hitori-3.31.0/debian/rules 2019-02-24 00:21:19.000000000 +0000 @@ -2,21 +2,12 @@ export DEB_LDFLAGS_MAINT_APPEND = -Wl,-z,defs -Wl,--as-needed export DEB_BUILD_MAINT_OPTIONS = hardening=+all +export CCACHE_DIR := $(CURDIR)/debian/ccache %: dh $@ override_dh_auto_configure: dh_auto_configure -- \ - --bindir='$${prefix}/games' \ - --disable-silent-rules + --bindir=/usr/games -override_dh_installchangelogs: - dh_installchangelogs - # Take care to install the old changelogs. - install ChangeLog.pre-0-2-2 debian/hitori/usr/share/doc/hitori/changelog - install help/ChangeLog.pre-0-2-2 debian/hitori/usr/share/doc/hitori/changelog.help.pre-0-2-2 - install po/ChangeLog.pre-0-2-2 debian/hitori/usr/share/doc/hitori/changelog.po.pre-0-2-2 - -get-orig-source: - uscan --download-current-version --force-download diff -Nru hitori-3.22.4/depcomp hitori-3.31.0/depcomp --- hitori-3.22.4/depcomp 2017-10-02 08:08:04.000000000 +0000 +++ hitori-3.31.0/depcomp 1970-01-01 00:00:00.000000000 +0000 @@ -1,791 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2013-05-30.07; # UTC - -# Copyright (C) 1999-2014 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva . - -case $1 in - '') - echo "$0: No command. Try '$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by 'PROGRAMS ARGS'. - object Object file output by 'PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputting dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit $? - ;; -esac - -# Get the directory component of the given path, and save it in the -# global variables '$dir'. Note that this directory component will -# be either empty or ending with a '/' character. This is deliberate. -set_dir_from () -{ - case $1 in - */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; - *) dir=;; - esac -} - -# Get the suffix-stripped basename of the given path, and save it the -# global variable '$base'. -set_base_from () -{ - base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` -} - -# If no dependency file was actually created by the compiler invocation, -# we still have to create a dummy depfile, to avoid errors with the -# Makefile "include basename.Plo" scheme. -make_dummy_depfile () -{ - echo "#dummy" > "$depfile" -} - -# Factor out some common post-processing of the generated depfile. -# Requires the auxiliary global variable '$tmpdepfile' to be set. -aix_post_process_depfile () -{ - # If the compiler actually managed to produce a dependency file, - # post-process it. - if test -f "$tmpdepfile"; then - # Each line is of the form 'foo.o: dependency.h'. - # Do two passes, one to just change these to - # $object: dependency.h - # and one to simply output - # dependency.h: - # which is needed to avoid the deleted-header problem. - { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" - sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" - } > "$depfile" - rm -f "$tmpdepfile" - else - make_dummy_depfile - fi -} - -# A tabulation character. -tab=' ' -# A newline character. -nl=' -' -# Character ranges might be problematic outside the C locale. -# These definitions help. -upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ -lower=abcdefghijklmnopqrstuvwxyz -digits=0123456789 -alpha=${upper}${lower} - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Avoid interferences from the environment. -gccflag= dashmflag= - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -cygpath_u="cygpath -u -f -" -if test "$depmode" = msvcmsys; then - # This is just like msvisualcpp but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvisualcpp -fi - -if test "$depmode" = msvc7msys; then - # This is just like msvc7 but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u='sed s,\\\\,/,g' - depmode=msvc7 -fi - -if test "$depmode" = xlc; then - # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. - gccflag=-qmakedep=gcc,-MF - depmode=gcc -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. -## Unfortunately, FreeBSD c89 acceptance of flags depends upon -## the command line argument order; so add the flags where they -## appear in depend2.am. Note that the slowdown incurred here -## affects only configure: in makefiles, %FASTDEP% shortcuts this. - for arg - do - case $arg in - -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; - *) set fnord "$@" "$arg" ;; - esac - shift # fnord - shift # $arg - done - "$@" - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. -## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. -## (see the conditional assignment to $gccflag above). -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). Also, it might not be -## supported by the other compilers which use the 'gcc' depmode. -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - # The second -e expression handles DOS-style file names with drive - # letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the "deleted header file" problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. -## Some versions of gcc put a space before the ':'. On the theory -## that the space means something, we add a space to the output as -## well. hp depmode also adds that space, but also prefixes the VPATH -## to the object. Take care to not repeat it in the output. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like '#:fec' to the end of the - # dependency line. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ - | tr "$nl" ' ' >> "$depfile" - echo >> "$depfile" - # The second pass generates a dummy entry for each header file. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> "$depfile" - else - make_dummy_depfile - fi - rm -f "$tmpdepfile" - ;; - -xlc) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts '$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - set_dir_from "$object" - set_base_from "$object" - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.u - tmpdepfile2=$base.u - tmpdepfile3=$dir.libs/$base.u - "$@" -Wc,-M - else - tmpdepfile1=$dir$base.u - tmpdepfile2=$dir$base.u - tmpdepfile3=$dir$base.u - "$@" -M - fi - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - aix_post_process_depfile - ;; - -tcc) - # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 - # FIXME: That version still under development at the moment of writing. - # Make that this statement remains true also for stable, released - # versions. - # It will wrap lines (doesn't matter whether long or short) with a - # trailing '\', as in: - # - # foo.o : \ - # foo.c \ - # foo.h \ - # - # It will put a trailing '\' even on the last line, and will use leading - # spaces rather than leading tabs (at least since its commit 0394caf7 - # "Emit spaces for -MD"). - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. - # We have to change lines of the first kind to '$object: \'. - sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" - # And for each line of the second kind, we have to emit a 'dep.h:' - # dummy dependency, to avoid the deleted-header problem. - sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" - rm -f "$tmpdepfile" - ;; - -## The order of this option in the case statement is important, since the -## shell code in configure will try each of these formats in the order -## listed in this file. A plain '-MD' option would be understood by many -## compilers, so we must ensure this comes after the gcc and icc options. -pgcc) - # Portland's C compiler understands '-MD'. - # Will always output deps to 'file.d' where file is the root name of the - # source file under compilation, even if file resides in a subdirectory. - # The object file name does not affect the name of the '.d' file. - # pgcc 10.2 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using '\' : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - set_dir_from "$object" - # Use the source, not the object, to determine the base name, since - # that's sadly what pgcc will do too. - set_base_from "$source" - tmpdepfile=$base.d - - # For projects that build the same source file twice into different object - # files, the pgcc approach of using the *source* file root name can cause - # problems in parallel builds. Use a locking strategy to avoid stomping on - # the same $tmpdepfile. - lockdir=$base.d-lock - trap " - echo '$0: caught signal, cleaning up...' >&2 - rmdir '$lockdir' - exit 1 - " 1 2 13 15 - numtries=100 - i=$numtries - while test $i -gt 0; do - # mkdir is a portable test-and-set. - if mkdir "$lockdir" 2>/dev/null; then - # This process acquired the lock. - "$@" -MD - stat=$? - # Release the lock. - rmdir "$lockdir" - break - else - # If the lock is being held by a different process, wait - # until the winning process is done or we timeout. - while test -d "$lockdir" && test $i -gt 0; do - sleep 1 - i=`expr $i - 1` - done - fi - i=`expr $i - 1` - done - trap - 1 2 13 15 - if test $i -le 0; then - echo "$0: failed to acquire lock after $numtries attempts" >&2 - echo "$0: check lockdir '$lockdir'" >&2 - exit 1 - fi - - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp2) - # The "hp" stanza above does not work with aCC (C++) and HP's ia64 - # compilers, which have integrated preprocessors. The correct option - # to use with these is +Maked; it writes dependencies to a file named - # 'foo.d', which lands next to the object file, wherever that - # happens to be. - # Much of this is similar to the tru64 case; see comments there. - set_dir_from "$object" - set_base_from "$object" - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir.libs/$base.d - "$@" -Wc,+Maked - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - "$@" +Maked - fi - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" - # Add 'dependent.h:' lines. - sed -ne '2,${ - s/^ *// - s/ \\*$// - s/$/:/ - p - }' "$tmpdepfile" >> "$depfile" - else - make_dummy_depfile - fi - rm -f "$tmpdepfile" "$tmpdepfile2" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in 'foo.d' instead, so we check for that too. - # Subdirectories are respected. - set_dir_from "$object" - set_base_from "$object" - - if test "$libtool" = yes; then - # Libtool generates 2 separate objects for the 2 libraries. These - # two compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir$base.o.d # libtool 1.5 - tmpdepfile2=$dir.libs/$base.o.d # Likewise. - tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -ne 0; then - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - # Same post-processing that is required for AIX mode. - aix_post_process_depfile - ;; - -msvc7) - if test "$libtool" = yes; then - showIncludes=-Wc,-showIncludes - else - showIncludes=-showIncludes - fi - "$@" $showIncludes > "$tmpdepfile" - stat=$? - grep -v '^Note: including file: ' "$tmpdepfile" - if test $stat -ne 0; then - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - # The first sed program below extracts the file names and escapes - # backslashes for cygpath. The second sed program outputs the file - # name when reading, but also accumulates all include files in the - # hold buffer in order to output them again at the end. This only - # works with sed implementations that can handle large buffers. - sed < "$tmpdepfile" -n ' -/^Note: including file: *\(.*\)/ { - s//\1/ - s/\\/\\\\/g - p -}' | $cygpath_u | sort -u | sed -n ' -s/ /\\ /g -s/\(.*\)/'"$tab"'\1 \\/p -s/.\(.*\) \\/\1:/ -H -$ { - s/.*/'"$tab"'/ - G - p -}' >> "$depfile" - echo >> "$depfile" # make sure the fragment doesn't end with a backslash - rm -f "$tmpdepfile" - ;; - -msvc7msys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove '-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for ':' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. - "$@" $dashmflag | - sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this sed invocation - # correctly. Breaking it into two sed invocations is a workaround. - tr ' ' "$nl" < "$tmpdepfile" \ - | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no eat=no - for arg - do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - if test $eat = yes; then - eat=no - continue - fi - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -arch) - eat=yes ;; - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix=`echo "$object" | sed 's/^.*\././'` - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - # makedepend may prepend the VPATH from the source file name to the object. - # No need to regex-escape $object, excess matching of '.' is harmless. - sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process the last invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed '1,2d' "$tmpdepfile" \ - | tr ' ' "$nl" \ - | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ - | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove '-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E \ - | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - | sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - IFS=" " - for arg - do - case "$arg" in - -o) - shift - ;; - $object) - shift - ;; - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E 2>/dev/null | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" - echo "$tab" >> "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvcmsys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru hitori-3.22.4/flatpak/org.gnome.Hitori-stable.json hitori-3.31.0/flatpak/org.gnome.Hitori-stable.json --- hitori-3.22.4/flatpak/org.gnome.Hitori-stable.json 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/flatpak/org.gnome.Hitori-stable.json 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1,47 @@ +{ + "app-id": "org.gnome.Hitori", + "runtime": "org.gnome.Platform", + "runtime-version": "3.22", + "sdk": "org.gnome.Sdk", + "command": "hitori", + "finish-args": + [ + /* X11 + XShm access */ + "--share=ipc", "--socket=x11", + /* Wayland access */ + "--socket=wayland", + /* Needed for dconf to work */ + "--filesystem=xdg-run/dconf", + "--filesystem=~/.config/dconf:ro", + "--talk-name=ca.desrt.dconf", + "--env=DCONF_USER_CONFIG_DIR=.config/dconf" + ], + "build-options" : + { + "cflags": "-O2 -g", + "cxxflags": "-O2 -g" + }, + "cleanup": + [ + "/include", "/lib/pkgconfig", + "/share/pkgconfig", "/share/aclocal", + "/man", "/share/man", "/share/gtk-doc", + "*.la", "*.a", + "/lib/girepository-1.0", + "/share/dbus-1", "/share/doc", "/share/gir-1.0" + ], + "modules": + [ + { + "name": "hitori", + "sources": + [ + { + "type": "git", + "url": "https://gitlab.gnome.org/GNOME/hitori.git", + "branch": "gnome-3-22" + } + ] + } + ] +} diff -Nru hitori-3.22.4/flatpak/org.gnome.Hitori-unstable.json hitori-3.31.0/flatpak/org.gnome.Hitori-unstable.json --- hitori-3.22.4/flatpak/org.gnome.Hitori-unstable.json 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/flatpak/org.gnome.Hitori-unstable.json 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1,51 @@ +{ + "app-id": "org.gnome.Hitori", + "runtime": "org.gnome.Platform", + "runtime-version": "master", + "sdk": "org.gnome.Sdk", + "command": "hitori", + "tags": ["nightly"], + "desktop-file-name-prefix": "(Nightly) ", + "finish-args": + [ + /* X11 + XShm access */ + "--share=ipc", "--socket=x11", + /* Wayland access */ + "--socket=wayland", + /* Needed for dconf to work */ + "--filesystem=xdg-run/dconf", + "--filesystem=~/.config/dconf:ro", + "--talk-name=ca.desrt.dconf", + "--env=DCONF_USER_CONFIG_DIR=.config/dconf" + ], + "build-options" : + { + "cflags": "-O2 -g", + "cxxflags": "-O2 -g" + }, + "cleanup": + [ + "/include", "/lib/pkgconfig", + "/share/pkgconfig", "/share/aclocal", + "/man", "/share/man", "/share/gtk-doc", + "*.la", "*.a", + "/lib/girepository-1.0", + "/share/dbus-1", "/share/doc", "/share/gir-1.0" + ], + "modules": + [ + { + "name": "hitori", + "config-opts": [ + "--disable-Werror" + ], + "sources": + [ + { + "type": "git", + "url": "https://gitlab.gnome.org/GNOME/hitori.git" + } + ] + } + ] +} diff -Nru hitori-3.22.4/help/ChangeLog.pre-0-2-2 hitori-3.31.0/help/ChangeLog.pre-0-2-2 --- hitori-3.22.4/help/ChangeLog.pre-0-2-2 2016-12-20 13:30:40.000000000 +0000 +++ hitori-3.31.0/help/ChangeLog.pre-0-2-2 1970-01-01 00:00:00.000000000 +0000 @@ -1,82 +0,0 @@ -2009-04-05 Philip Withnall - - * C/hitori.xml: - * de/de.po: - * en_GB/en_GB.po: - * sv/sv.po: Changed the website to live.gnome.org. - -2009-04-05 Philip Withnall - - * en_GB/en_GB.po: Updated British English translation. - -2009-04-05 Philip Withnall - - * en_GB/en_GB.po: Updated British English translation. - -2009-04-05 Philip Withnall - - * C/hitori.xml: - * de/de.po: Fixed markup in manual such that it validates, and updated - translations accordingly. - -2009-03-02 Mario Blättermann - - * de/de.po: Added German translation. - * de/figures: Added screenshot. - * Makefile.am: Added de. - -2009-03-09 Philip Withnall - - * en_GB/en_GB.po: Updated British English translation. - -2009-03-09 Philip Withnall - - * C/hitori.xml: Expanded manual. - -2009-03-09 Philip Withnall - - * C/hitori.xml: - * Makefile.am: Generate a list of documenters from the documentation - itself. - -2009-03-02 Daniel Nylander - - * sv/sv.po: Added Swedish translation. - * sv/figures: Added screenshot. - * Makefile.am: Added sv. - -2009-03-01 Philip Withnall - - * C/hitori.xml: Made it clearer that multiple solutions are possible. - -2009-03-01 Philip Withnall - - Updated svn:ignore properties. - -2008-07-08 Philip Withnall - - * C/hitori.xml: Updated application version. - -2008-06-27 Philip Withnall - - * ChangeLog: Ported bzr history to ChangeLogs. - -2008-06-26 Philip Withnall - - * C/figures/hitori_main_window.png: Updated screenshot in - documentation. - -2008-06-08 Philip Withnall - - * Makefile.am: - * en_GB/en_GB.po: Added en_GB (British English) documentation - translation. - -2008-06-08 Philip Withnall - - * C/figures/hitori_main_window.png: - * C/hitori.xml: - * C/legal.xml: - * ChangeLog: - * Makefile.am: - * hitori.omf.in: Added documentation. diff -Nru hitori-3.22.4/help/cs/customization.page hitori-3.31.0/help/cs/customization.page --- hitori-3.22.4/help/cs/customization.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/cs/customization.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,12 +0,0 @@ - - - - - - Změna vzhledu a způsobu hraní. - - Přizpůsobení hry - -

Hru si lze přizpůsobit změnou velikosti hrací desky — dovolené jsou čtvercové hrací desky o rozměrech 5 až 10 políček.

-

Pokud chcete změnit velikost hrací desky, vyberte některou z voleb v HraVelikost hrací desky. V případě, že máte rozehranou hru, dotáže se Hitori, jestli ji má ukončit a po té spustí novou hru s požadovanými rozměry hrací desky.

- Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/help/cs/figures/hitori_main_window.png and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/help/cs/figures/hitori_main_window.png differ diff -Nru hitori-3.22.4/help/cs/game.page hitori-3.31.0/help/cs/game.page --- hitori-3.22.4/help/cs/game.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/cs/game.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,25 +0,0 @@ - - - - - - Úvod do hry Hitori. - - Hra Hitori - -

Hitori je malý logický hlavolam podobné povahy jako populárnější Sudoku. Hráč začíná hru s čtvercovou hrací deskou s čísly a musí zatřít políčka tak, aby se v žádném řádku ani sloupci žádné číslo neopakovalo. Platí přitom následující pravidla:

- -

V každém řádku i sloupci se musí v nezatřených políčkách vyskytovat každé číslo jen jednou.

 -

Žádná zatřená políčka nesmí navzájem svisle nebo vodorovně sousedit.

 -

Všechna nezatřená políčka musí být spolu svisle nebo vodorovně propojená do jedné skupiny.

 - -

Musí se dodržovat pouhá tři pravidla, a tak je dost dobře možné, že může mít dané rozložení hrací desky Hitori více řešení.

- -
- Hlavní okno hry - Hlavní okno hry Hitori - -

Hlavní okno hry Hitori.

- -
- diff -Nru hitori-3.22.4/help/cs/index.page hitori-3.31.0/help/cs/index.page --- hitori-3.22.4/help/cs/index.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/cs/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ - - - - - - Philip Withnall - philip@tecnocode.co.uk - 2008 – 2010 - - -

Práce je licencována pod licencí Creative Commons Attribution-Share Alike 3.0 Unported License.

- - - Nápověda ke hře Hitori - -
- Základy hraní a použití -
- -
- Tipy a triky -
- diff -Nru hitori-3.22.4/help/cs/legal.xml hitori-3.31.0/help/cs/legal.xml --- hitori-3.22.4/help/cs/legal.xml 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/cs/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ - - - -

Tato práce je licencována pod Creative Commons Attribution-ShareAlike 3.0 Unported License.

- - diff -Nru hitori-3.22.4/help/cs/playing.page hitori-3.31.0/help/cs/playing.page --- hitori-3.22.4/help/cs/playing.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/cs/playing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,15 +0,0 @@ - - - - - - Použití Hitori k hraní hry. - - Jak hrát - -

Novou hru spustíte volbou HraNová hra. Pokud už máte rozehranou hru, Hitori se vás dotáže, jestli chcete současnou hru ukončit.

-

Políčko zatřete tím, že na něj klikněte. Zatření políčka zrušíte opětovným kliknutím na něj. Až jsou políčka zatřená tak, že neporušují žádné ze tří pravidel, hra končí a na hrací desce nelze nadále dělat žádné změny.

-

Hitori vám také umožňuje si pro své potřeby při řešení políčka označovat. Dělá se to podržením klávesy Ctrl nebo Shift a kliknutím na políčko. Obě označení se liší a mohou být u stejného políčka použita i naráz. Označení zrušíte opětovným kliknutím za současného přidržení Ctrl nebo Shift.

-

Pokud chcete vrátit tah zpět nebo jej provést znovu, zvolte HraZpět nebo HraZnovu. Vracet zpět a znovu provádět můžete libovolný počet tahů bez omezení.

-

Pokud chcete radu, které políčko zatřít, zvolte HraRada. Políčko se zvýrazní blikajícím červeným obrysem. To naznačuje, že současný stav políčka (zatřené nebo nezatřené) je nesprávný a pro vítězné dokončení hry by měl být změněn.

- diff -Nru hitori-3.22.4/help/cs/strategy.page hitori-3.31.0/help/cs/strategy.page --- hitori-3.22.4/help/cs/strategy.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/cs/strategy.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,15 +0,0 @@ - - - - - - Strategie pro hraní Hitori. - - Herní strategie - -

Hra Hitori je trochu podobná Sudoku, také vyžaduje logickou dedukci k určení, která políčka zatřít. Jednou ze strategií je použít klikání spolu s klávesou Shift k označení všech čísel, která se v jednotlivých sloupcích opakují, a s klávesou Ctrl k označení těch, která se opakují v jednotlivých řádcích.

-

Až to uděláte na celé desce, budou některá políčka označena oběma způsoby a ty jsou horkými kandidáty na zatření, ale naplatí to vždy. Když políčko zatíráte, zrušte označení všech políček se stejným číslem v příslušném řádku a sloupci, tak si udržíte přehled, které buňky stále porušují pravidlo 1 hry Hitori.

-

Stále mějte na paměti také pravidlo 2 hry Hitori, že nesmí být zatřeny naráz sousedící políčka. Políčka, která druhé pravidlo poruší, budou zvýrazněna červeně. Stejně tak budou červeně zvýrazněny skupiny políček, které porušují pravidlo číslo 3 oddělením jednoho nebo více nezatřených políček od jiných nezatřených políček.

- -

Jestli se v nějakém bodě zaseknete, zvolte HraRada, aby vám aplikace Hitori označila políčko, které by se mělo zatřít nebo očistit, a tím vás přiblížila k řešení.

- diff -Nru hitori-3.22.4/help/da/customization.page hitori-3.31.0/help/da/customization.page --- hitori-3.22.4/help/da/customization.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/da/customization.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,18 +0,0 @@ - - - - - - Ændre spillets udseende og hvordan det spilles. - - - Joe Hansen - joedalton2@yahoo.dk - 2009 - - - Tilpasse spillet - -

Spillet kan tilpasses ved at ændre brætstørrelsen - bræt med 5-10 cellefirkanter per række/kolonne er tilladt.

-

Ændring af brætstørrelse foretages ved at vælge en af mulighederne fra SpilBrætstørrelse. Hitori vil spørge, om du ønsker at standse det aktuelle spil, hvis du er i gang med et, og så starte et nyt spil med den ønskede brætstørrelse.

- diff -Nru hitori-3.22.4/help/da/game.page hitori-3.31.0/help/da/game.page --- hitori-3.22.4/help/da/game.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/da/game.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - Introduktion til spillet Hitori. - - - Joe Hansen - joedalton2@yahoo.dk - 2009 - - - Spillet Hitori - -

Hitori er et lille logikpuslespil, der minder om det mere populære Sudoku. I spillet starter spilleren med et firkantsbræt med tal, og skal herfra markere celler indtil der ikke er ens tal i hver række og kolonne. Følgende regler gælder:

- -

Der må kun være et af hvert tal i de umarkerede celler i hver række og kolonne.

 -

Ingen markerede celle må være ved siden af en anden markeret celle, hverken vertikalt eller horisontalt.

 -

Alle de umarkerede celler skal være forbundet vertikalt og horisontalt i en gruppe.

 - -

Dette er de eneste tre regler i spillet, og der kan derfor være flere løsninger i et Hitoripuslespil.

- -
- Spillets hovedvindue - Hitoris hovedvindue - -

Hitoris hovedvindue.

- -
- diff -Nru hitori-3.22.4/help/da/index.page hitori-3.31.0/help/da/index.page --- hitori-3.22.4/help/da/index.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/da/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Philip Withnall - philip@tecnocode.co.uk - 2008–2010 - - -

Dette værk er licenseret under Creative Commons Attribution-Share Alike 3.0 Unported License.

- - - - Joe Hansen - joedalton2@yahoo.dk - 2009 - - - Hjælp til Hitori - -
- Grundlæggende spil & brug -
- -
- Tips & tricks -
- diff -Nru hitori-3.22.4/help/da/legal.xml hitori-3.31.0/help/da/legal.xml --- hitori-3.22.4/help/da/legal.xml 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/da/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ - - - -

Dette værk er licenseret under Creative Commons Attribution-ShareAlike 3.0 Unported License.

- - diff -Nru hitori-3.22.4/help/da/playing.page hitori-3.31.0/help/da/playing.page --- hitori-3.22.4/help/da/playing.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/da/playing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,21 +0,0 @@ - - - - - - Tag et spil Hitori. - - - Joe Hansen - joedalton2@yahoo.dk - 2009 - - - Et spil - -

For at starte et nyt spil vælges SpilNyt spil. Hvis du allerede er i gang med et spil, vil Hitori spørge, om du ønsker at stoppe det aktuelle spil.

-

Klik på en celle for at markere den, fjern markeringen ved at klikke igen. Når dine markerede celler ikke bryder nogen af de tre regler vil spillet slutte, og brættet kan ikke længeres manipuleres.

-

Hitori giver dig mulighed for at fremhæve celler, når du forsøger at løse et bræt. Dette kan gøres ved at holde Ctrl eller Skift nede og klikke på en celle. De to metoder fremhæver cellerne på forskellig måde, og den enkelte celle kan fremhæves på begge måder. Du kan fjerne fremhævelsen på cellerne igen ved at klikke på dem igen, mens du holder enten Ctrl eller Skift nede.

-

For at fortryde eller omgøre et træk vælges SpilFortryd eller SpilOmgør. Du kan fortryde eller omgøre så mange træk, du ønsker, uden begrænsning.

-

For at se fif til hvilke celler, der skal markeres, vælges SpilFif. En celle vil blive fremhævet med et blinkende rødt omrids. Dette viser, at den aktuelle status på cellen (markeret eller umarkeret) er forkert, og bør ændres for at du kan vinde spillet.

- diff -Nru hitori-3.22.4/help/da/strategy.page hitori-3.31.0/help/da/strategy.page --- hitori-3.22.4/help/da/strategy.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/da/strategy.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,21 +0,0 @@ - - - - - - Spilstrategier til Hitori. - - - Joe Hansen - joedalton2@yahoo.dk - 2009 - - - Spilstrategier - -

Hitori ligner på mange måder Sudoku, da det kræver logisk omtanke at finde ud af hvilke celler, der skal markeres. Én strategi er at bruge Skift-klik til at fremhæve alle gentagne tal i hver kolonne, og så bruge Ctrl-klik til at fremhæve alle gentagne tal i hver række.

-

Når dette er gjort på hele brættet, er de celler, der er blevet markeret på begge måder, gode kandidater til markering – men ikke altid. Når en celle markeres, og de andre celler med samme tal i den samme række eller kolonne afmarkeres, er det en god måde at holde styr på hvilke celler, der fortsat bryder Hitoris regel 1.

-

Husk at Hitoris regel 2 betyder, at to tilstødende celler ikke begge kan markeres. Hitori fremhæver celler, der bryder regel 2, med rødt. På samme måde vil grupper af celler, der bryder regel 3 ved at adskille en eller flere umarkerede celler fra de andre umarkerede celler, blive fremhævet med rødt.

- -

Hvis du ikke kan komme videre, så vælg SpilFif for at få Hitori til at vise en celle, der skal markeres eller afmarkeres, for at komme tættere på en løsning.

- diff -Nru hitori-3.22.4/help/de/customization.page hitori-3.31.0/help/de/customization.page --- hitori-3.22.4/help/de/customization.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/de/customization.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,24 +0,0 @@ - - - - - - Änderung des Erscheinungsbilds und des Spiels. - - - Mario Blättermann - mario.blaettermann@gmail.com - 2009-2012 - - - - Christian Kirbach - christian.kirbach@googlemail.com - 2015 - - - Das Spiel anpassen - -

Das Spiel kann durch Ändern der Spielfeldgröße angepasst werden. Spielfeldgrößen von fünf bis zehn Feldern sind dabei erlaubt.

-

Um die Spielfeldgröße zu ändern, wählen Sie eine der Optionen in SpielSpielfeldgröße. Hitori fragt Sie dann, ob Sie das gegenwärtig laufende Spiel abbrechen wollen, falls bereits ein Spiel läuft. Dann wird ein neues Spiel mit der gewünschten Spielfeldgröße gestartet.

- Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/help/de/figures/hitori_main_window.png and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/help/de/figures/hitori_main_window.png differ diff -Nru hitori-3.22.4/help/de/game.page hitori-3.31.0/help/de/game.page --- hitori-3.22.4/help/de/game.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/de/game.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - Einführung in das Hitori-Spiel. - - - Mario Blättermann - mario.blaettermann@gmail.com - 2009-2012 - - - - Christian Kirbach - christian.kirbach@googlemail.com - 2015 - - - Das Hitori-Spiel - -

Hitori ist ein kleines Puzzlespiel, das dem bekannteren Sudoku etwas ähnelt. Der Spieler beginnt mit einem mit Zahlenfeldern gefüllten quadratischen Spielfeld und muss nach und nach Zahlenfelder einfärben, bis in jeder der Zeilen und Spalten keine Zahlen mehrfach vorkommen. Dabei kommen die folgenden Regeln zur Anwendung:

- -

Jede Zahl darf in den ungefärbten Feldern einer Zeile oder Spalte nur einmal vorkommen.

 -

Nicht eingefärbte Felder dürfen in senkrechter oder waagerechter Richtung einander berühren.

 -

Alle nicht eingefärbten Felder müssen waagerecht und senkrecht als eine Gruppe miteinander verbunden sein.

 - -

Es gibt nur diese drei Regeln für das Spiel, daher sind auf einem Hitori-Spielfeld durchaus mehrere Lösungen möglich.

- -
- Hauptfenster des Spiels - Hauptfenster von Hitori - -

Hauptfenster von Hitori.

- -
- diff -Nru hitori-3.22.4/help/de/index.page hitori-3.31.0/help/de/index.page --- hitori-3.22.4/help/de/index.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/de/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Philip Withnall - philip@tecnocode.co.uk - 2008–2010 - - -

Dieses Werk ist lizenziert unter einer Creative Commons Attribution-Share Alike 3.0 Unported License.

- - - - Mario Blättermann - mario.blaettermann@gmail.com - 2009-2012 - - - - Christian Kirbach - christian.kirbach@googlemail.com - 2015 - - - Hitori-Hilfe - -
- Grundlagen des Spiels und der Benutzung -
- -
- Tipps und Tricks -
- diff -Nru hitori-3.22.4/help/de/legal.xml hitori-3.31.0/help/de/legal.xml --- hitori-3.22.4/help/de/legal.xml 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/de/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ - - - -

Dieses Werk wird unter folgender Lizenz verbreitet: Creative Commons Namensnennung - Weitergabe unter gleichen Bedingungen 3.0 nicht angepasst.

- - diff -Nru hitori-3.22.4/help/de/playing.page hitori-3.31.0/help/de/playing.page --- hitori-3.22.4/help/de/playing.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/de/playing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,27 +0,0 @@ - - - - - - Ein Spiel mit Hitori spielen. - - - Mario Blättermann - mario.blaettermann@gmail.com - 2009-2012 - - - - Christian Kirbach - christian.kirbach@googlemail.com - 2015 - - - Das Spiel spielen - -

Um ein neues Spiel zu starten, wählen Sie SpielNeues Spiel. Falls bereits ein Spiel läuft, fragt Hitori, ob das aktuelle Spiel beendet werden soll.

-

Um ein Feld einzufärben, klicken Sie darauf. Ein erneuter Klick macht die Färbung wieder rückgängig. Wenn die Felder so eingefärbt sind, dass keine der drei Regeln gebrochen wurde, endet das Spiel und kann nicht mehr verändert werden.

-

Hitori gestattet Ihnen auch, Felder als Markierungen hervorzuheben. Halten Sie dazu beim Anklicken eines Feldes die Strg- oder Umschalt-Taste gedrückt. Die beiden Tasten heben ein Feld unterschiedlich hervor, wobei auch ein Feld auf beide Arten gekennzeichnet werden kann. Die Hervorhebung von Feldern kann wieder entfernt werden, wenn Sie beim Anklicken eines Feldes wiederum die Strg- oder Umschalt-Taste gedrückt halten.

-

Um einen Zug rückgängig zu machen oder zu wiederholen, wählen Sie SpielRückgängig oder SpielWiederholen. Sie können ohne Einschränkungen so viele Züge rückgängig machen oder wiederholen, wie Sie wollen.

-

Um einen Hinweis darauf zu erhalten, welche Felder eingefärbt werden sollten, wählen Sie SpielHinweis. Ein Feld wird daraufhin durch eine blinkende rote Umrandung hervorgehoben. Dies zeigt an, dass der gegenwärtige Zustand des Feldes (eingefärbt oder nicht eingefärbt) nicht korrektist und geändert werden muss, um das Spiel gewinnen zu können.

- diff -Nru hitori-3.22.4/help/de/strategy.page hitori-3.31.0/help/de/strategy.page --- hitori-3.22.4/help/de/strategy.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/de/strategy.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,27 +0,0 @@ - - - - - - Strategien zum Spielen von Hitori. - - - Mario Blättermann - mario.blaettermann@gmail.com - 2009-2012 - - - - Christian Kirbach - christian.kirbach@googlemail.com - 2015 - - - Strategien des Spiels - -

Hitori ist Sudoku recht ähnlich, im Hinblick darauf, dass auf logische Weise herausgefunden werden muss, welche Zellen eingefärbt werden müssen. Eine Strategie ist, die Umschalttaste zu drücken, um alle mehrfach vorkommenden Ziffern in jeder Spalte anzuzeigen, oder die Strg-Taste, um die mehrfach vorkommenden Ziffern in jeder Zeile anzuzeigen.

-

Sobald dies für das gesamte Spielfeld geschehen ist, sind die durch beide Maßnahmen hervorgehobenen Zellen gute Kandidaten für das Einfärben, allerdings nicht immer. Wenn Sie eine Zelle einfärben, werden die Zellen mit der gleichen Ziffer in der gleichen Zeile und Spalte nicht mehr hervorgehoben. Auf diese Weise finden Sie am besten heraus, welche Zellen die oberste Regel von Hitori noch immer brechen.

-

Denken Sie immer an die zweite Hitori-Regel, welche besagt, dass zwei benachbarte Zellen nicht zugleich eingefärbt sein können. Hitori hebt die jeweils äußerst linke Zelle hervor, welche die zweite Regel übertritt. Analog werden Zellengruppen in Rot hervorgehoben, die die dritte Regel brechen, weil eine oder mehrere nicht eingefärbte Zellen von den anderen nicht eingefärbten Zellen getrennt werden.

- -

Falls Sie an einem Punkt angelangt sind, an dem Sie nicht mehr weiter wissen, wählen Sie SpielHinweis, um Hitori eine Zelle hervorheben zu lassen, welche eingefärbt werden oder die Einfärbung zurückgenommen werden sollte, um einer Lösung näher zu kommen.

- diff -Nru hitori-3.22.4/help/el/customization.page hitori-3.31.0/help/el/customization.page --- hitori-3.22.4/help/el/customization.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/el/customization.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ - - - - - - Αλλάξτε την εμφάνιση και εκτέλεση του παιχνιδιού. - - - Ελληνική μεταφραστική ομάδα GNOME - team@gnome.gr - 2014 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2014 - - - - Μαυρίδου Μαρία - mavridou@gmail.com - 2014 - - - Προσαρμόζοντας το παιχνίδι - -

Το παιχνίδι μπορεί να προσαρμοστεί αλλάζοντας το μέγεθος του πίνακα - επιτρέπονται πίνακες από 5–10 τετράγωνα κελιά.

-

Για να αλλάξετε το μέγεθος του πίνακα, επιλέξτε από το ΠαιχνίδιΜέγεθος πίνακα. Το Hitori θα σας ρωτήσει αν θέλετε να σταματήσετε το τρέχον παιχνίδι αν είσαστε στο μέσο ενός παιχνιδιού, έπειτα αρχίστε με ένα νέο παιχνίδι με το ζητούμενο μέγεθος πίνακα.

- diff -Nru hitori-3.22.4/help/el/game.page hitori-3.31.0/help/el/game.page --- hitori-3.22.4/help/el/game.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/el/game.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,43 +0,0 @@ - - - - - - Εισαγωγή στο παιχνίδι του Hitori. - - - Ελληνική μεταφραστική ομάδα GNOME - team@gnome.gr - 2014 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2014 - - - - Μαυρίδου Μαρία - mavridou@gmail.com - 2014 - - - Το παιχνίδι Hitori - -

Το Hitori είναι ένα παιχνίδι λογικής με γρίφους, με παρόμοιο ύφος με το πιο δημοφιλές Σουντόκου. Στο παιχνίδι, ο παίκτης ξεκινά με έναν τετράγωνο πίνακα αριθμών και πρέπει να ξεβάψει κελιά μέχρι να μην υπάρχουν διπλοί αριθμοί σε κάθε γραμμή και στήλη. Οι παρακάτω κανόνες εφαρμόζονται:

- -

Πρέπει να υπάρχει μόνο ένας από κάθε αριθμό στα άβαφα κελιά σε κάθε γραμμή και στήλη.

 -

Κανένα βαμμένο κελί δεν μπορεί να είναι γειτονικό με ένα άλλο κάθετα ή οριζόντια.

 -

Όλα τα άβαφα κελιά πρέπει να ενώνονται μαζί κάθετα και οριζόντια σε μια ομάδα.

 - -

Αυτοί είναι οι μόνοι τρεις κανόνες του παιχνιδιού και έτσι μπορεί να υπάρξουν πολλές λύσεις σε ένα πίνακα γρίφου Hitori.

- -
- Το κυρίως παράθυρο του παιχνιδιού - Το κυρίως παράθυρο του Hitori - -

Το κυρίως παράθυρο του Hitori.

- -
- diff -Nru hitori-3.22.4/help/el/index.page hitori-3.31.0/help/el/index.page --- hitori-3.22.4/help/el/index.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/el/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,41 +0,0 @@ - - - - - - Philip Withnall - philip@tecnocode.co.uk - 2008–2010 - - -

Αυτό το έργο έχει αδειοδοτηθεί υπό την Άδεια Creative Commons Attribution-Share Alike 3.0 Unported.

- - - - Ελληνική μεταφραστική ομάδα GNOME - team@gnome.gr - 2014 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2014 - - - - Μαυρίδου Μαρία - mavridou@gmail.com - 2014 - - - Βοήθεια του Hitori - -
- Βασικό παιχνίδι και χρήση -
- -
- Συμβουλές και κόλπα -
- diff -Nru hitori-3.22.4/help/el/legal.xml hitori-3.31.0/help/el/legal.xml --- hitori-3.22.4/help/el/legal.xml 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/el/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ - - - -

Αυτό το έργο έχει αδειοδοτηθεί υπό την Άδεια Creative Commons Attribution-ShareAlike 3.0 Unported.

- - diff -Nru hitori-3.22.4/help/el/playing.page hitori-3.31.0/help/el/playing.page --- hitori-3.22.4/help/el/playing.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/el/playing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Χρησιμοποιήστε το Hitori για να παίξετε ένα παιχνίδι. - - - Ελληνική μεταφραστική ομάδα GNOME - team@gnome.gr - 2014 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2014 - - - - Μαυρίδου Μαρία - mavridou@gmail.com - 2014 - - - Παίζοντας ένα παιχνίδι - -

Για να ξεκινήσετε ένα νέο παιχνίδι, επιλέξτε ΠαιχνίδιΝέο παιχνίδι. Αν παίζετε ήδη ένα παιχνίδι, το Hitori θα σας ρωτήσει αν θέλετε να σταματήσετε το τρέχον παιχνίδι.

-

Για να βάψετε ένα κελί, κάντε κλικ πάνω του· για να το ξεβάψετε πάλι, πατήστε το ξανά. Όταν τα κελιά είναι βαμμένα έτσι ώστε κανένας από τους τρεις κανόνες να μην παραβιάζεται, το παιχνίδι θα τερματίσει και ο πίνακας δεν μπορεί πια να επεξεργαστεί.

-

Το Hitori σας επιτρέπει επίσης να επισημάνετε κελιά για τη δική σας αναφορά όταν λύνετε έναν πίνακα. Αυτό μπορεί να επιτευχθεί κρατώντας πατημένο το Ctrl ή το Shift και κάνοντας κλικ σε ένα κελί. Και τα δυο επισημαίνουν τα κελιά διαφορετικά και τα κελιά μπορούν να επισημανθούν και με τους δύο τρόπους ταυτόχρονα. Τα επισημασμένα κελιά μπορούν να αποεπισημανθούν πατώντας πάνω τους ξανά με πατημένο ή το Ctrl ή το Shift.

-

Για να αναιρέσετε ή να ακυρώσετε την αναίρεση μιας κίνησης, επιλέξτε ΠαιχνίδιΑναίρεση ή ΠαιχνίδιΕπανάληψη. Μπορείτε να αναιρέσετε ή να ξανακάνετε όσες κινήσεις θέλετε χωρίς περιορισμό.

-

Για να πάρετε μια υπόδειξη ποια κελιά να ξεβάψετε, επιλέξτε ΠαιχνίδιΥπόδειξη. Ένα κελί θα επισημανθεί με ένα αναλάμπον κόκκινο περίγραμμα. Αυτό εμφανίζει ότι η τρέχουσα κατάσταση του κελιού (βαμμένο ή άβαφο) είναι εσφαλμένη και πρέπει να αλλαχθεί για να κερδηθεί το παιχνίδι.

- diff -Nru hitori-3.22.4/help/el/strategy.page hitori-3.31.0/help/el/strategy.page --- hitori-3.22.4/help/el/strategy.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/el/strategy.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,33 +0,0 @@ - - - - - - Στρατηγικές για να παίξετε το Hitori. - - - Ελληνική μεταφραστική ομάδα GNOME - team@gnome.gr - 2014 - - - - Δημήτρης Σπίγγος - dmtrs32@gmail.com - 2014 - - - - Μαυρίδου Μαρία - mavridou@gmail.com - 2014 - - - Στρατηγικές αναπαραγωγής παιχνιδιού - -

Το Hitori είναι αρκετά παρόμοιο με το Σουντόκου, στο ότι παίρνει λογική επαγωγή για να υπολογίσει ποια κελιά θα ξεβαφτούν. Μια στρατηγική είναι να χρησιμοποιήσετε το Shift για να επισημανθούν όλοι οι επαναλαμβανόμενοι αριθμοί σε κάθε στήλη, έπειτα να χρησιμοποιήσετε το Ctrl για να επισημάνετε όλους τους επαναλαμβανόμενους αριθμούς σε κάθε γραμμή.

-

Αφού γίνει αυτό για όλον τον πίνακα, τα κελιά που έχουν επισημανθεί και με τους δύο τρόπους είναι καλοί υποψήφιοι για βαφή, αν και όχι πάντα. Όταν βάφετε ένα κελί, η αποεπισήμανση των άλλων κελιών με τον ίδιο αριθμό στην ίδια γραμμή και στήλη με αυτό το κελί είναι ένας καλός τρόπος να παρακολουθήσετε ποια κελιά παραβιάζουν ακόμα τον κανόνα 1 του Hitori.

-

Να έχετε κατά νου πάντα ότι ο κανόνας 2 του Hitori σημαίνει ότι δύο γειτονικά κελιά δεν μπορούν να βαφτούν και τα δύο. Το Hitori θα επισημάνει με κόκκινο τα κελιά που παραβιάζουν τον κανόνα 2. Παρόμοια, οι ομάδες των κελιών που παραβιάζουν τον κανόνα 3 χωρίζοντας ένα ή περισσότερα άβαφα κελιά από τα άλλα βαμμένα κελιά θα επισημανθούν με κόκκινο.

- -

Αν κολλήσετε οπουδήποτε, επιλέξτε ΠαιχνίδιΥπόδειξη για να τοποθετήσει το Hitori μια σημαία σε ένα κελί που πρέπει να βαφτεί ή να ξεβαφτεί για να πλησιάσετε μια λύση.

- diff -Nru hitori-3.22.4/help/en_GB/customization.page hitori-3.31.0/help/en_GB/customization.page --- hitori-3.22.4/help/en_GB/customization.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/en_GB/customization.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,12 +0,0 @@ - - - - - - Changing how the game appears and plays. - - Customising the Game - -

The game can be customised by changing the board size — boards from 5–10 cells square are allowed.

-

To change the board size, choose an option from GameBoard Size. Hitori will ask if you want to stop the current game if you're in the middle of one, then start a new game with the requested board size.

- diff -Nru hitori-3.22.4/help/en_GB/game.page hitori-3.31.0/help/en_GB/game.page --- hitori-3.22.4/help/en_GB/game.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/en_GB/game.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,25 +0,0 @@ - - - - - - Introduction to the game of Hitori. - - Hitori the Game - -

Hitori is a small logic puzzle in a similar vein to the more popular Sudoku. In the game, the player starts with a square board of numbers, and has to paint out cells until there are no duplicate numbers in each row and column. The following rules apply:

- -

There must only be one of each number in the unpainted cells in each row and column.

 -

No painted cell may be adjacent to another, vertically or horizontally.

 -

All the unpainted cells must be joined together vertically and horizontally in one group.

 - -

These are the only three rules of the game, and so there may well be multiple solutions to a Hitori puzzle board.

- -
- Main game window - Hitori main window - -

Hitori main window.

- -
- diff -Nru hitori-3.22.4/help/en_GB/index.page hitori-3.31.0/help/en_GB/index.page --- hitori-3.22.4/help/en_GB/index.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/en_GB/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ - - - - - - Philip Withnall - philip@tecnocode.co.uk - 2008–2010 - - -

This work is licensed under a Creative Commons Attribution-Share Alike 3.0 Unported Licence.

- - - Hitori Help - -
- Basic Gameplay & Usage -
- -
- Tips & Tricks -
- diff -Nru hitori-3.22.4/help/en_GB/legal.xml hitori-3.31.0/help/en_GB/legal.xml --- hitori-3.22.4/help/en_GB/legal.xml 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/en_GB/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,8 +0,0 @@ - - - -

This work is licensed under a - Creative Commons - Attribution-ShareAlike 3.0 Unported License.

- - diff -Nru hitori-3.22.4/help/en_GB/playing.page hitori-3.31.0/help/en_GB/playing.page --- hitori-3.22.4/help/en_GB/playing.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/en_GB/playing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,15 +0,0 @@ - - - - - - Using Hitori to play a game. - - Playing a Game - -

To start a new game, choose GameNew Game. If you are already playing a game, Hitori will ask if you want to stop the current game.

-

To paint a cell, click on it; to unpaint it again, click on it again. When cells are painted such that none of the three rules are broken, the game will end and the board may no longer be manipulated.

-

Hitori also allows you to highlight cells for your own reference when solving a board. This can be achieved by holding Ctrl or Shift and clicking on a cell. They both highlight cells differently, and cells can be highlighted in both manners at the same time. Highlighted cells can be de-highlighted by clicking on them again while holding either Ctrl or Shift again.

-

To undo or redo a move, choose GameUndo or GameRedo. You may undo or redo as many moves as you like without restriction.

-

To get a hint on which cells to paint out, choose GameHint. A cell will be highlighted with a flashing red outline. This shows that the current status of the cell (painted or unpainted) is incorrect, and should be changed for the game to be won.

- diff -Nru hitori-3.22.4/help/en_GB/strategy.page hitori-3.31.0/help/en_GB/strategy.page --- hitori-3.22.4/help/en_GB/strategy.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/en_GB/strategy.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,15 +0,0 @@ - - - - - - Strategies for playing Hitori. - - Gameplay Strategies - -

Hitori is quite similar to Sudoku, in that it takes logical deduction to work out which cells to paint out. One strategy is to use Shift-clicking to highlight all the repeated numbers in each column, then use Ctrl-clicking to highlight all the repeated numbers in each row.

-

Once this is done for the entire board, the cells which have been highlighted both ways are good candidates for painting, although not always. When painting a cell, unhighlighting the other cells with the same number in the same row and column as that cell is a good way to keep track of which cells are still violating rule 1 of Hitori.

-

Always bear in mind that rule 2 of Hitori means that two adjacent cells can't both be painted. Hitori will highlight in red the cells which violate rule 2. Similarly, groups of cells which violate rule 3 by separating one or more unpainted cells from the other unpainted cells will be highlighted in red.

- -

If you get stuck at any point, choose GameHint for Hitori to flag a cell which should be painted or unpainted to move closer to a solution.

- diff -Nru hitori-3.22.4/help/es/customization.page hitori-3.31.0/help/es/customization.page --- hitori-3.22.4/help/es/customization.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/es/customization.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,24 +0,0 @@ - - - - - - Cambiar la apariencia del juego y la jugabilidad. - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2012-2014 - - - - Jorge González - jorgegonz@svn.gnome.org - 2007-2010 - - - Personalizar el juego - -

El juego se puede personalizar cambiando el tamaño del tablero: se permiten tableros cuadrados de 5-10 celdas.

-

Para cambiar el tamaño del tablero elija una opción de JuegoTamaño del tablero. Hitori le preguntará si quiere parar la partida actual si está en medio de una, después se iniciará una partida nueva con el tamaño de tablero solicitado.

- diff -Nru hitori-3.22.4/help/es/game.page hitori-3.31.0/help/es/game.page --- hitori-3.22.4/help/es/game.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/es/game.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - Introducción al juego Hitori. - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2012-2014 - - - - Jorge González - jorgegonz@svn.gnome.org - 2007-2010 - - - El juego de Hitori - -

Hitori es un pequeño juego de puzle lógico del mismo tipo que el popular Sudoku. En la partida, el jugador comienza en un tablero cuadrado de números y tiene que escribir en las celdas hasta que no haya números duplicados en cada fila y columna. Se aplican las siguientes reglas:

- -

Sólo debe existir un número de cada tipo en las celdas vacías en cada fila y columna.

 -

Ninguna celda escrita debe estar adyacente a otra, vertical u horizontalmente.

 -

Todas las celdas vacías deben unirse juntas vertical y horizontalmente en un grupo.

 - -

Estas son las tres únicas reglas del juego y por ello puede haber múltiples soluciones de un tablero de puzle Hitori.

- -
- Ventana principal del juego - Ventana principal de Hitori - -

Ventana principal de Hitori.

- -
- diff -Nru hitori-3.22.4/help/es/index.page hitori-3.31.0/help/es/index.page --- hitori-3.22.4/help/es/index.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/es/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Philip Withnall - philip@tecnocode.co.uk - 2008–2010 - - -

Este trabajo está licenciado bajo una Licencia Creative Commons atribución - compartir igual 3.0 sin soporte.

- - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2012-2014 - - - - Jorge González - jorgegonz@svn.gnome.org - 2007-2010 - - - Ayuda de Hitori - -
- Uso básico del juego -
- -
- Sugerencias y trucos -
- diff -Nru hitori-3.22.4/help/es/legal.xml hitori-3.31.0/help/es/legal.xml --- hitori-3.22.4/help/es/legal.xml 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/es/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ - - - -

Este trabajo está licenciado bajo la Creative Commons de Atribución-Compartir Igual 3.0 sin soporte.

- - diff -Nru hitori-3.22.4/help/es/playing.page hitori-3.31.0/help/es/playing.page --- hitori-3.22.4/help/es/playing.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/es/playing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,27 +0,0 @@ - - - - - - Usando Hitori para jugar una partida. - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2012-2014 - - - - Jorge González - jorgegonz@svn.gnome.org - 2007-2010 - - - Jugar una partida - -

Para iniciar una partida nueva elija JuegoJuego nuevo. Si ya está jugando una partida Hitori le preguntará si quiere parar la partida actual.

-

Para escribir en una celda pulse sobre ella; para vaciar una celda pulse sobre ella de nuevo. Cuando las celdas están escritas de tal forma que ninguna de las tres reglas se ha roto, entonces el juego finalizará y no se podrá manipular el tablero.

-

Hitori también le permite resaltar celdas para su propia referencia mientras está resolviendo un tablero. Esto se puede hacer pulsando la tecla Ctrl o Mayús y pulsando sobre una celda. Ambas resaltan la celda de forma diferente y las celdas se pueden resaltar de ambas maneras a la vez. A las celdas resaltadas se las puede quitar el resaltado pulsando sobre ellas de nuevo con Ctrl o Mayús.

-

Para deshacer o rehacer un movimiento elija JuegoDeshacer o JuegoReahcer. Puede deshacer y rehacer tantos movimientos como quiera, sin restricción.

-

Para obtener una sugerencia acerca de cómo rellenar las celdas elija JuegoSugerencia. Se resaltará una celda con un marco rojo. Esto muestra que el estado actual de la celda (escrita o vacía) es incorrecto y se debería cambiar para ganar la partida.

- diff -Nru hitori-3.22.4/help/es/strategy.page hitori-3.31.0/help/es/strategy.page --- hitori-3.22.4/help/es/strategy.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/es/strategy.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,27 +0,0 @@ - - - - - - Estrategias para jugar Hitori. - - - Daniel Mustieles - daniel.mustieles@gmail.com - 2012-2014 - - - - Jorge González - jorgegonz@svn.gnome.org - 2007-2010 - - - Estrategias de juego - -

Hitori es bastante similar al Sudoku, de hecho usa parte de su deducción lógica para averiguar qué celdas se deben pintar. Una estrategia es usar Mayús-ratón para resaltar todos los números repetidos en cada columna, después usar Ctrl-ratón para resaltar todos los números repetidos en cada fila.

-

Una vez que esto está echo para el tablero entero, las celdas que se han resaltado de ambas maneras, son buenas candidatas para ser pintadas, aunque no siempre. Al pintar una celda, quite el resaltado del resto de celdas con el mismo número en la misma fila y columna, ya que esa celda se convierte en una buena forma de mantener el seguimiento de qué celdas todavía violan la primera regla de Hitori.

-

Tenga siempre en mente la segunda regla de Hitori, dos celdas adyacentes no pueden estar ambas pintadas. Hitori resaltará en rojo la celda más a la izquierda que viole la regla número dos. De igual forma, se resaltarán en rojo grupos de celtas que violen la tercera regla separando uno o más celdas sin pintar de las otras celdas sin pintar.

- -

Si se queda parado en cualquier punto, elija JuegoSugerencias para que Hitori marque una casilla que se debería pintar o limpiar y así acercarse a la solución.

- diff -Nru hitori-3.22.4/help/fr/customization.page hitori-3.31.0/help/fr/customization.page --- hitori-3.22.4/help/fr/customization.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/fr/customization.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,18 +0,0 @@ - - - - - - Modification de l'apparence et du comportement du jeu - - - Bruno Brouard - annoa.b@gmail.com - 2010 - - - Personnalisation du jeu - -

Le jeu est personnalisable en modifiant la taille du plateau — il est possible de choisir des plateaux carrés de 5 à 10 cases par côté.

-

Pour modifier la taille du plateau, sélectionnez une option de taille dans le sous-menu JeuTaille du plateau. Hitori vous demande si vous voulez interrompre le jeu en cours si vous êtes au milieu d'une partie, puis il initie un nouveau jeu avec la taille de plateau demandée.

- Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/help/fr/figures/hitori_main_window.png and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/help/fr/figures/hitori_main_window.png differ diff -Nru hitori-3.22.4/help/fr/game.page hitori-3.31.0/help/fr/game.page --- hitori-3.22.4/help/fr/game.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/fr/game.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ - - - - - - Introduction au jeu Hitori - - - Bruno Brouard - annoa.b@gmail.com - 2010 - - - Le jeu Hitori - -

Hitori est un petit casse-tête logique de la même veine que le populaire Sudoku. Dans ce jeu, le joueur démarre avec un plateau carré de chiffres et doit griser les cases de façon à ce qu'aucun chiffre ne soit en double dans chaque ligne et chaque colonne. Les règles ci-après doivent être respectées :

- -

Il ne doit y avoir qu'un seul exemplaire de chaque chiffre parmi les cases non-grisées dans chaque ligne et chaque colonne.

 -

Aucune case grisée ne peut toucher une autre, verticalement ou horizontalement.

 -

Toutes les cases non-grisées doivent faire partie d'un groupe tant verticalement qu'horizontalement.

 - -

La règle du jeu ne comporte que ces trois exigences ; il peut donc y avoir plusieurs solutions pour un même plateau de jeu Hitori.

- -
- Fenêtre principale du jeu - Fenêtre principale de Hitori - -

Fenêtre principale de Hitori.

- -
- diff -Nru hitori-3.22.4/help/fr/index.page hitori-3.31.0/help/fr/index.page --- hitori-3.22.4/help/fr/index.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/fr/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,29 +0,0 @@ - - - - - - Philip Withnall - philip@tecnocode.co.uk - 2008–2010 - - -

Cette œuvre est sous licence Creative Commons Paternité-Partage des Conditions Initiales à l'Identique 3.0 Unported.

- - - - Bruno Brouard - annoa.b@gmail.com - 2010 - - - Aide de Hitori - -
- Règle du jeu & utilisation -
- -
- Trucs & astuces -
- diff -Nru hitori-3.22.4/help/fr/legal.xml hitori-3.31.0/help/fr/legal.xml --- hitori-3.22.4/help/fr/legal.xml 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/fr/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ - - - -

Cette œuvre est distribuée sous licence Creative Commons Paternité-Partage des Conditions Initiales à l'Identique 3.0 Unported..

- - diff -Nru hitori-3.22.4/help/fr/playing.page hitori-3.31.0/help/fr/playing.page --- hitori-3.22.4/help/fr/playing.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/fr/playing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,21 +0,0 @@ - - - - - - Utilisation de Hitori pour faire une partie. - - - Bruno Brouard - annoa.b@gmail.com - 2010 - - - Déroulement d'une partie - -

Pour lancer une nouvelle partie, sélectionnez JeuNouvelle partie. Si vous aviez une partie en cours, Hitori vous demande de confirmer l'arrêt de la partie en cours.

-

Pour griser une case, faites un clic de souris dessus ; pour la libérer, cliquez dessus à nouveau. Quand les cases sont grisées de façon à ce qu'aucune des trois règles ne soit transgressée, le jeu est terminé et le plateau ne peut plus être modifié.

-

Hitori vous permet également de mettre, à votre initiative, des cases en évidence au cours de la résolution d'une partie. Cela s'opère en maintenant enfoncées les touches Ctrl ou Maj et en cliquant sur la case. L'une et l'autre manœuvre mettent en évidence les cases de façon différente ; les deux façons peuvent coexister sur une même case. Les cellules mises en évidence peuvent être libérées par un nouveau clic tout en maintenant pressée soit la touche Ctrl, soit la touche Maj.

-

Pour annuler ou rétablir un coup, sélectionnez JeuAnnuler ou JeuRétablir. Vous pouvez annuler ou rétablir autant de coups que vous souhaitez sans restriction.

-

Pour obtenir une indication sur les cases à griser, sélectionnez JeuIndice. Une case sera mise en évidence par un encadrement rouge clignotant. Cela indique que l'état actuel de la case (grisée ou libre) est incorrect et qu'il doit être modifié pour gagner la partie.

- diff -Nru hitori-3.22.4/help/fr/strategy.page hitori-3.31.0/help/fr/strategy.page --- hitori-3.22.4/help/fr/strategy.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/fr/strategy.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,21 +0,0 @@ - - - - - - Stratégies de jeu pour Hitori - - - Bruno Brouard - annoa.b@gmail.com - 2010 - - - Stratégies de jeu - -

Hitori trouve une quasi analogie avec le Sudoku du fait qu'il exige des déductions logiques pour trouver quelles cases griser. Une tactique consiste à utiliser la touche Maj tout en cliquant pour mettre en évidence tous les chiffres répétés dans chaque colonne, puis la touche Ctrl de la même manière pour mettre en évidence les chiffres répétés dans chaque ligne.

-

Une fois ceci fait pour la totalité du plateau, les cases mises en évidence dans les deux cas sont de bonnes candidates au grisé, mais cela n'est pas toujours vrai. Quand vous grisez une case, enlever la mise en évidence des autres cases portant le même chiffre dans la même colonne et dans la même ligne est un bon moyen pour détecter les cases qui contreviennent encore à la règle n° 1 du jeu Hitori.

-

Ne perdez pas de vue que la règle n° 2 du jeu de Hitori exige que deux cases adjacentes ne peuvent pas être grisées toutes deux. Hitori met en surbrillance rouge les cases qui ne se conforment pas à cette règle. De la même manière, les groupes de cases qui ne respectent pas la règle n° 3 en isolant une ou plusieurs cases non grisées du reste des autres cases non grisées seront également mises en évidence en rouge.

- -

Si vous êtes bloqué à une quelconque phase du jeu, sélectionnez JeuIndice : Hitori marque alors une cellule à griser ou à libérer pour vous approcher de la solution.

- diff -Nru hitori-3.22.4/help/fur/fur.po hitori-3.31.0/help/fur/fur.po --- hitori-3.22.4/help/fur/fur.po 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/help/fur/fur.po 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1,336 @@ +# Friulian translation for hitori. +# Copyright (C) 2017 hitori's COPYRIGHT HOLDER +# This file is distributed under the same license as the hitori package. +# Fabio Tomat , 2017. +# +msgid "" +msgstr "" +"Project-Id-Version: hitori master\n" +"POT-Creation-Date: 2017-09-22 19:46+0000\n" +"PO-Revision-Date: 2017-10-12 09:55+0200\n" +"Language-Team: Friulian \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Language: fur\n" +"Last-Translator: Fabio Tomat \n" +"X-Generator: Poedit 2.0.3\n" + +#. Put one translator per line, in the form NAME , YEAR1, YEAR2 +msgctxt "_" +msgid "translator-credits" +msgstr "Fabio Tomat , 2017" + +#. (itstool) path: info/desc +#: C/customization.page:6 +msgid "Changing how the game appears and plays." +msgstr "Cambiant l'aspiet e il mût di zuiâ." + +#. (itstool) path: page/title +#: C/customization.page:8 +msgid "Customizing the Game" +msgstr "Personalizant il zûc" + +#. (itstool) path: page/p +#: C/customization.page:10 +msgid "" +"The game can be customized by changing the board size — boards from 5–10 " +"cells square are allowed." +msgstr "" +"Il zûc al pues jessi personalizât cambiant la dimension de taule — a son " +"permetudis lis taulis di 5 a 10 caselis." + +#. (itstool) path: page/p +#: C/customization.page:11 +msgid "" +"To change the board size, choose an option from GameBoard Size. Hitori will ask if you want to stop the current game if you're in the middle " +"of one, then start a new game with the requested board size." +msgstr "" +"Par cambiâ la dimension de taule, sielç une opzion di ZûcDimension taule. Se " +"o sês tal mieç di une partide Hitori us domandarà se o desiderais " +"fermâ il zûc in vore e tacâ une gnove partide cun la dimension de taule " +"domandade." + +#. (itstool) path: info/desc +#: C/game.page:6 +msgid "Introduction to the game of Hitori." +msgstr "Introduzion al zûc di Hitori." + +#. (itstool) path: page/title +#: C/game.page:8 +msgid "Hitori the Game" +msgstr "Hitori il zûc" + +#. (itstool) path: page/p +#: C/game.page:10 +msgid "" +"Hitori is a small logic puzzle in a similar vein to the more popular Sudoku. " +"In the game, the player starts with a square board of numbers, and has to " +"paint out cells until there are no duplicate numbers in each row " +"and column. The following rules apply:" +msgstr "" +"Hitori al è un piçul berdei logjic de stesse risme dal plui famôs Sudoku. " +"Intal zûc il zuiadôr al tache cuntune taule cuadrade di numars e al à di " +"scrivi tes caselis fintremai che no son numars compagns in ogni rie " +"e colone. Si aplichin lis regulis chi daurman:" + +#. (itstool) path: item/p +#: C/game.page:13 +msgid "" +"There must only be one of each number in the unpainted cells in each row and " +"column." +msgstr "" +"Al scugne jessi dome un di ogni numar tes caselis vueidis in ogni rie e " +"colone." + +#. (itstool) path: item/p +#: C/game.page:14 +msgid "No painted cell may be adjacent to another, vertically or horizontally." +msgstr "" +"Nissune casele scrite e pues stâ in bande a une altre, sedi verticâl che " +"orizontâl." + +#. (itstool) path: item/p +#: C/game.page:15 +msgid "" +"All the unpainted cells must be joined together vertically and horizontally " +"in one group." +msgstr "" +"Dutis lis caselis vueidis a scugnin jessi unidis in verticâl o orizontâl " +"intun grup." + +#. (itstool) path: page/p +#: C/game.page:17 +msgid "" +"These are the only three rules of the game, and so there may well be " +"multiple solutions to a Hitori puzzle board." +msgstr "" +"Indi son dome trê regulis dal zûc e cusì si pues vê plui soluzions aes " +"taulis dal berdei Hitori." + +#. (itstool) path: figure/title +#: C/game.page:20 +msgid "Main game window" +msgstr "Barcon principâl dal zûc" + +#. (itstool) path: figure/desc +#: C/game.page:21 +msgid "Hitori main window" +msgstr "Barcon principâl di Hitori" + +#. (itstool) path: figure/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/game.page:22 +msgctxt "_" +msgid "" +"external ref='figures/hitori_main_window.png' " +"md5='b6ea3ee1ff73311d002cfdb4463032be'" +msgstr "" +"external ref='figures/hitori_main_window.png' " +"md5='b6ea3ee1ff73311d002cfdb4463032be'" + +#. (itstool) path: media/p +#: C/game.page:23 +msgid "Hitori main window." +msgstr "Barcon principâl di Hitori." + +#. (itstool) path: credit/name +#: C/index.page:6 +msgid "Philip Withnall" +msgstr "Philip Withnall" + +#. (itstool) path: credit/years +#: C/index.page:8 +msgid "2008–2010" +msgstr "2008–2010" + +#. (itstool) path: license/p +#: C/index.page:11 +msgid "" +"This work is licensed under a Creative Commons Attribution-Share Alike 3.0 Unported " +"License." +msgstr "" +"Chest lavôr al è in licence sot di une Licence Creative Commons Atribuzion-condivision " +"compagne 3.0 Unported." + +#. (itstool) path: page/title +#: C/index.page:15 +msgid "Hitori Help" +msgstr "Jutori di Hitori" + +#. (itstool) path: section/title +#: C/index.page:18 +msgid "Basic Gameplay & Usage" +msgstr "Ûs di fonde dal zûc" + +#. (itstool) path: section/title +#: C/index.page:22 +msgid "Tips & Tricks" +msgstr "Dretis e trucs" + +#. (itstool) path: p/link +#: C/legal.xml:5 +msgid "Creative Commons Attribution-ShareAlike 3.0 Unported License" +msgstr "Licence Creative Commons Atribuzion-condivision compagne 3.0 Unported" + +#. (itstool) path: license/p +#: C/legal.xml:4 +msgid "This work is licensed under a <_:link-1/>." +msgstr "Chest lavôr al è in licence sot de <_:link-1/>." + +#. (itstool) path: info/desc +#: C/playing.page:6 +msgid "Using Hitori to play a game." +msgstr "Doprant Hitori par zuiâ une partide." + +#. (itstool) path: page/title +#: C/playing.page:8 +msgid "Playing a Game" +msgstr "Zuiâ une partide" + +#. (itstool) path: page/p +#: C/playing.page:10 +msgid "" +"To start a new game, choose GameNew Game. If you are already playing a game, " +"Hitori will ask if you want to stop the current game." +msgstr "" +"Par tacâ une gnove partide, sielç ZûcGnove partide. Se si sta za zuiant a une " +"partide, Hitori al domandarà se si desidere fermâ la partide in " +"cors." + +#. (itstool) path: page/p +#: C/playing.page:12 +msgid "" +"To paint a cell, click on it; to unpaint it again, click on it again. When " +"cells are painted such that none of the three rules are broken, the game " +"will end and the board may no longer be manipulated." +msgstr "" +"Par scrivi une casele, fâs clic parsore di une; par scancelâle, fâs clic " +"parsore di chê di gnûf. Cuant che lis caselis a vegnin scritis siche nissune " +"des trê regulis a vegnin violadis, il zûc al finìs e la taule no pues jessi " +"plui modificade." + +#. (itstool) path: page/p +#: C/playing.page:14 +msgid "" +"Hitori also allows you to highlight cells for your own reference " +"when solving a board. This can be achieved by holding Ctrl or " +"Shift and clicking on a cell. They both highlight cells " +"differently, and cells can be highlighted in both manners at the same time. " +"Highlighted cells can be de-highlighted by clicking on them again while " +"holding either Ctrl or Shift again." +msgstr "" +"Hitori al permet ancje di evidenziâ caselis par fâ in mût di vê " +"riferiments cuant che si risolf une taule. Chest si pues fâ tignint fracât " +"Ctrl o Maiusc e fasint clic suntune casele. I doi " +"tascj a evidenzin lis caselis in manieris diferentis e si pues evidenziâ la " +"stesse casele in dutis dôs lis manieris. Si pues gjavâ la evidenziazion " +"fasint di gnûf clic su lis caselis intant che si ten fracât di gnûf o " +"Ctrl o Maiusc." + +#. (itstool) path: page/p +#: C/playing.page:18 +msgid "" +"To undo or redo a move, choose GameUndo or GameRedo. You may undo or redo as " +"many moves as you like without restriction." +msgstr "" +"Par disfâ o tornâ a fâ une mosse, sielzeit ZûcDisfe o ZûcTorne fâs. Si pues disfâ " +"o tornâ a fâ dutis lis mossis che si vûl cence restrizions." + +#. (itstool) path: page/p +#: C/playing.page:21 +msgid "" +"To get a hint on which cells to paint out, choose GameHint. A cell will be " +"highlighted with a flashing red outline. This shows that the current status " +"of the cell (painted or unpainted) is incorrect, and should be changed for " +"the game to be won." +msgstr "" +"Par vê un sugjeriment su cuale casele scrivi, sielç ZûcSugjeriment. Une casele e " +"si evidenziarà cuntun contor lampant di ros. Chest al indiche che il stât " +"atuâl de casele (scrite o no) nol è just e che al varès di jessi cambiât par " +"podê vinci." + +#. (itstool) path: info/desc +#: C/strategy.page:6 +msgid "Strategies for playing Hitori." +msgstr "Strategjiis par zuiâ a Hitori." + +#. (itstool) path: page/title +#: C/strategy.page:8 +msgid "Gameplay Strategies" +msgstr "Strategjiis di zûc" + +#. (itstool) path: page/p +#: C/strategy.page:10 +msgid "" +"Hitori is quite similar to Sudoku, in that it takes logical deduction to " +"work out which cells to paint out. One strategy is to use Shift-" +"clicking to highlight all the repeated numbers in each column, then " +"use Ctrl-clicking to highlight all the repeated numbers in each " +"row." +msgstr "" +"Hitori al è une vore simil a Sudoku, parcè che i covente deduzion logjiche " +"par capî cualis caselis scrivi. Une strategjie e je chê di fâ Shift-clic par evidenziâ ducj i numars ripetûts in ogni colone, dopo " +"fâ Ctrl-clic par evidenziâ ducj i numars ripetûts in ogni " +"rie." + +#. (itstool) path: page/p +#: C/strategy.page:13 +msgid "" +"Once this is done for the entire board, the cells which have been " +"highlighted both ways are good candidates for painting, although not always. " +"When painting a cell, unhighlighting the other cells with the same number in " +"the same row and column as that cell is a good way to keep track of which " +"cells are still violating rule 1 of Hitori." +msgstr "" +"Une volte fat pe taule interie, lis caselis che a son stadis evidenziadis in " +"dutis dôs lis manieris a son buinis pe scriture, ma no simpri. Cuant che si " +"scrîf une casele, il gjavâ la evidenziazion des altris caselis, cul stes " +"numar inte stesse rie e colone di chê casele, al è une buine maniere par " +"tignî cont di cualis caselis a stan violant la regule 1 " +"di Hitori." + +#. (itstool) path: page/p +#: C/strategy.page:16 +msgid "" +"Always bear in mind that rule 2 of Hitori means that two adjacent cells " +"can't both be painted. Hitori will highlight in red the cells " +"which violate rule 2. Similarly, groups of cells which violate rule 3 by " +"separating one or more unpainted cells from the other unpainted cells will " +"be highlighted in red." +msgstr "" +"Ten iniments che la regule 2 di Hitori al significhe che dôs caselis vicinis " +"no puedin jessi dutis dôs scritis. Hitori al evidenziarà in ros " +"lis caselis che a violin la regule 2. Te stesse maniere, i grups di caselis " +"che a violin la regule 3 separant une o plui caselis vueidis des altris " +"caselis vueidis a vignaran evidenziadis in ros." + +#. (itstool) path: page/p +#: C/strategy.page:20 +msgid "" +"If you get stuck at any point, choose GameHint for Hitori to " +"flag a cell which should be painted or unpainted to move closer to a " +"solution." +msgstr "" +"Se si reste impantanâts intun pont, sielzeit ZûcSugjeriment par fâ in mût " +"che Hitori al segni une casele di scrivi o scancelâ par rivâ plui " +"dongje ae soluzion." diff -Nru hitori-3.22.4/help/hu/customization.page hitori-3.31.0/help/hu/customization.page --- hitori-3.22.4/help/hu/customization.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/hu/customization.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,24 +0,0 @@ - - - - - - A játék megjelenésének és menetének megváltoztatása - - - Kelemen Gábor - kelemeng at gnome dot hu - 2014. - - - - Úr Balázs - urbalazs at gmail dot com - 2013, 2014. - - - A játék személyre szabása - -

A játék a tábla méretének módosításával szabható személyre - 5-10 cellás négyzet táblák használhatók.

-

A tábla méretének módosításához válasszon egy lehetőséget a JátékTáblaméret menüpont alatt. Ha éppen játék közben van, a Hitori meg fogja kérdezni, hogy leállítja-e az aktuális játékot és újat indít a kért táblamérettel.

- Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/help/hu/figures/hitori_main_window.png and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/help/hu/figures/hitori_main_window.png differ diff -Nru hitori-3.22.4/help/hu/game.page hitori-3.31.0/help/hu/game.page --- hitori-3.22.4/help/hu/game.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/hu/game.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - Bevezetés a Hitori játékba. - - - Kelemen Gábor - kelemeng at gnome dot hu - 2014. - - - - Úr Balázs - urbalazs at gmail dot com - 2013, 2014. - - - Hitori, a játék - -

A Hitori egy kis logikai fejtörő a népszerűbb Sudokuhoz hasonlóan. A játékban a játékos egy négyzet alakú számtáblával indul, és ki kell festenie a cellákat, amíg nem maradnak többször szereplő számok az egyes sorokban és oszlopokban. A következők a szabályok:

- -

A sorokban és oszlopokban kifestetlen cellákban minden számból csak egy lehet.

 -

A kifestett cellák nem lehetnek vízszintesen vagy függőlegesen szomszédosak.

 -

Minden kifestetlen cellának össze kell kapcsolódnia vízszintesen és függőlegesen egy csoportba.

 - -

A játéknak csak ez a három szabálya van, így több megoldása is lehet egy-egy Hitori fejtörőtáblának.

- -
- Fő játék ablak - Hitori főablak - -

Hitori főablak.

- -
- diff -Nru hitori-3.22.4/help/hu/index.page hitori-3.31.0/help/hu/index.page --- hitori-3.22.4/help/hu/index.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/hu/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Philip Withnall - philip@tecnocode.co.uk - 2008–2010 - - -

Ez a munka a Creative Commons Nevezd meg!-Így add tovább! 3.0 Ne változtasd! licenc alatt érhető el.

- - - - Kelemen Gábor - kelemeng at gnome dot hu - 2014. - - - - Úr Balázs - urbalazs at gmail dot com - 2013, 2014. - - - Hitori súgó - -
- Alapvető játékmenet és használat -
- -
- Tippek és trükkök -
- diff -Nru hitori-3.22.4/help/hu/legal.xml hitori-3.31.0/help/hu/legal.xml --- hitori-3.22.4/help/hu/legal.xml 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/hu/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ - - - -

Ez a mű a Creative Commons Nevezd meg!-Így add tovább! 3.0 átíratlan licenc feltételei szerint terjeszthető.

- - diff -Nru hitori-3.22.4/help/hu/playing.page hitori-3.31.0/help/hu/playing.page --- hitori-3.22.4/help/hu/playing.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/hu/playing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,27 +0,0 @@ - - - - - - A Hitori játék használata. - - - Kelemen Gábor - kelemeng at gnome dot hu - 2014. - - - - Úr Balázs - urbalazs at gmail dot com - 2013, 2014. - - - Játékmenet - -

Új játék indításához válassza a JátékÚj játék menüpontot. Ha már játszik, a Hitori meg fogja kérdezni, hogy leállítja-e az aktuális játékot.

-

Egy cella kifestéséhez kattintson rá. A kifestés megszüntetéséhez kattintson rá újra. Amikor a cellák úgy vannak kifestve, hogy a három szabály egyike sem sérül, a játék befejeződik és a tábla már nem lesz módosítható.

-

A Hitori lehetővé teszi a tábla megoldása közbe a cellák kiemelését saját jegyzetként. Ez a Ctrl vagy Shift billentyű lenyomva tartása közbeni cellára kattintással érhető el. A két billentyű eltérően emeli ki a cellákat, és a cellák egyszerre mindkét módon kiemelhetők. A cellák kiemelése megszüntethető, ha a Ctrl vagy Shift nyomva tartása közben újra rájuk kattint.

-

Egy lépés visszavonásához vagy mégis végrehajtásához válassza a JátékVisszavonás vagy a JátékMégis menüpontot. Korlátlan számú lépést vonhat vissza vagy hajthat végre mégis.

-

A kifestendő cellákkal kapcsolatos tippért válassza a JátékTipp menüpontot. Egy cella villogó vörös körvonallal kerül kiemelésre. Ez jelzi, hogy a cella aktuális állapota (kifestett vagy sem) helytelen, és meg kell változtatni a játék megnyeréséhez.

- diff -Nru hitori-3.22.4/help/hu/strategy.page hitori-3.31.0/help/hu/strategy.page --- hitori-3.22.4/help/hu/strategy.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/hu/strategy.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,27 +0,0 @@ - - - - - - Stratégiák a Hitori játékhoz. - - - Kelemen Gábor - kelemeng at gnome dot hu - 2014. - - - - Úr Balázs - urbalazs at gmail dot com - 2013, 2014. - - - Játékmenet stratégiák - -

A Hitori meglehetősen hasonló a Sudokuhoz, amennyiben logikai következtetéssel lehet meghatározni a kifestendő cellákat. Az egyik stratégia szerint a Shift használatával kiemeljük az ismétlődő számokat az egyes oszlopokban, majd a Ctrl használatával kiemeljük az ismétlődő számokat az egyes sorokban.

-

Miután ez megvan a teljes táblán, a mindkét módon kiemelt cellák jó jelöltek a kifestéshez, noha nem mindig. Egy cella kifestésekor az ugyanabban a sorban és oszlopban azonos számot tartalmazó cellák kiemelésének megszüntetése jó módszer azon cellák nyilvántartására, amelyek még mindig megsértik a Hitori 1. szabályát.

-

Mindig tartsa szem előtt a Hitori 2. szabályát, miszerint két szomszédos cella nem lehet egyszerre kifestve. A Hitori vörössel emeli ki a 2. szabályt megsértő cellákat. Hasonlóan a 3. szabályt a kifestetlen cellák többi kifestetlen cellától való elválasztásával megsértő cellák is vörössel lesznek kiemelve.

- -

Ha bármikor elakad, válassza a Játék Tipp menüpontot, hogy a Hitori kiemeljen egy cellát, amelynek kifestésével vagy kifestésének törlésével közelebb lehet jutni a megoldáshoz.

- diff -Nru hitori-3.22.4/help/Makefile.am hitori-3.31.0/help/Makefile.am --- hitori-3.22.4/help/Makefile.am 2017-09-22 09:21:15.000000000 +0000 +++ hitori-3.31.0/help/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,16 +0,0 @@ -@YELP_HELP_RULES@ - -HELP_ID = hitori -HELP_LINGUAS = cs da de el en_GB es fr hu pl ro sl sv zh_CN -HELP_MEDIA = figures/hitori_main_window.png -HELP_FILES = \ - customization.page \ - game.page \ - index.page \ - legal.xml \ - playing.page \ - strategy.page - -EXTRA_DIST = ChangeLog.pre-0-2-2 - --include $(top_srcdir)/git.mk diff -Nru hitori-3.22.4/help/Makefile.in hitori-3.31.0/help/Makefile.in --- hitori-3.22.4/help/Makefile.in 2017-10-02 08:08:05.000000000 +0000 +++ hitori-3.31.0/help/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,518 +0,0 @@ -# Makefile.in generated by automake 1.15 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2014 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = help -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/appstream-xml.m4 \ - $(top_srcdir)/m4/ax_append_compile_flags.m4 \ - $(top_srcdir)/m4/ax_append_flag.m4 \ - $(top_srcdir)/m4/ax_append_link_flags.m4 \ - $(top_srcdir)/m4/ax_check_compile_flag.m4 \ - $(top_srcdir)/m4/ax_check_enable_debug.m4 \ - $(top_srcdir)/m4/ax_check_link_flag.m4 \ - $(top_srcdir)/m4/ax_code_coverage.m4 \ - $(top_srcdir)/m4/ax_compiler_flags.m4 \ - $(top_srcdir)/m4/ax_compiler_flags_cflags.m4 \ - $(top_srcdir)/m4/ax_compiler_flags_gir.m4 \ - $(top_srcdir)/m4/ax_compiler_flags_ldflags.m4 \ - $(top_srcdir)/m4/ax_generate_changelog.m4 \ - $(top_srcdir)/m4/ax_is_release.m4 \ - $(top_srcdir)/m4/ax_require_defined.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gsettings.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/pkg.m4 \ - $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/m4/yelp.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -am__DIST_COMMON = $(srcdir)/Makefile.in -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -APPSTREAM_UTIL = @APPSTREAM_UTIL@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ -CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ -CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ -CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ -CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ -CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GCOV = @GCOV@ -GENERAL_CFLAGS = @GENERAL_CFLAGS@ -GENERAL_LIBS = @GENERAL_LIBS@ -GENHTML = @GENHTML@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GIT = @GIT@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTK_PREFIX = @GTK_PREFIX@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -ITSTOOL = @ITSTOOL@ -LCOV = @LCOV@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -WARN_LDFLAGS = @WARN_LDFLAGS@ -WARN_SCANNERFLAGS = @WARN_SCANNERFLAGS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMLLINT = @XMLLINT@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -appstreamxmldir = @appstreamxmldir@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -HELP_ID = hitori -HELP_LINGUAS = cs da de el en_GB es fr hu pl ro sl sv zh_CN -HELP_MEDIA = figures/hitori_main_window.png -HELP_FILES = \ - customization.page \ - game.page \ - index.page \ - legal.xml \ - playing.page \ - strategy.page - -EXTRA_DIST = ChangeLog.pre-0-2-2 -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu help/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu help/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags TAGS: - -ctags CTAGS: - -cscope cscopelist: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - cscopelist-am ctags-am distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags-am uninstall uninstall-am - -.PRECIOUS: Makefile - -@YELP_HELP_RULES@ - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru hitori-3.22.4/help/meson.build hitori-3.31.0/help/meson.build --- hitori-3.22.4/help/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/help/meson.build 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1,17 @@ +help_media = [ + 'figures/hitori_main_window.png', +] +help_files = [ + 'customization.page', + 'game.page', + 'index.page', + 'legal.xml', + 'playing.page', + 'strategy.page', +] + +gnome.yelp(meson.project_name(), + sources: help_files, + media: help_media, + symlink_media: true, +) diff -Nru hitori-3.22.4/help/pl/customization.page hitori-3.31.0/help/pl/customization.page --- hitori-3.22.4/help/pl/customization.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/pl/customization.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,24 +0,0 @@ - - - - - - Zmiana wyglądu i rozgrywki. - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - Dostosowanie gry - -

Można dostosować grę zmieniając rozmiar planszy. Można ustawić od 5 do 10 komórek.

-

Aby zmienić rozmiar planszy, wybierz opcję z menu GraRozmiar planszy. Hitori zapyta, czy zatrzymać bieżącą grę, jeśli jakaś jest rozgrywana, a następnie rozpocznie nową z ustawionym rozmiarem planszy.

- Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/help/pl/figures/hitori_main_window.png and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/help/pl/figures/hitori_main_window.png differ diff -Nru hitori-3.22.4/help/pl/game.page hitori-3.31.0/help/pl/game.page --- hitori-3.22.4/help/pl/game.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/pl/game.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - Wprowadzenie do gry Hitori. - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - Gra Hitori - -

Hitori to mała łamigłówka podobna do popularniejszej gry Sudoku. W tej grze gracz zaczyna na kwadratowej planszy z liczbami, z której musi wymazywać komórki, dopóki w każdym wierszu i kolumnie nie będzie podwójnych liczb. Reguły gry:

- -

W niewymazanych komórkach w każdym wierszu i kolumnie może być tylko jedno wystąpienie każdej liczby.

 -

Żadna wymazana komórka nie może dotykać drugiej, pionowo lub poziomo.

 -

Wszystkie niewymazane komórki muszą być połączone pionowo i poziomo w jednej grupie.

 - -

Istnieją tylko te trzy reguły, więc każda plansza Hitori może mieć więcej niż jedno rozwiązanie.

- -
- Główne okno gry - Główne okno gry Hitori - -

Główne okno gry Hitori.

- -
- diff -Nru hitori-3.22.4/help/pl/index.page hitori-3.31.0/help/pl/index.page --- hitori-3.22.4/help/pl/index.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/pl/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Philip Withnall - philip@tecnocode.co.uk - 2008-2010 - - -

Na warunkach licencji Creative Commons Attribution-Share Alike 3.0 Unported.

- - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - Hitori - -
- Podstawy gry -
- -
- Wskazówki i porady -
- diff -Nru hitori-3.22.4/help/pl/legal.xml hitori-3.31.0/help/pl/legal.xml --- hitori-3.22.4/help/pl/legal.xml 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/pl/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ - - - -

Na warunkach licencji Creative Commons Attribution-ShareAlike 3.0 Unported.

- - diff -Nru hitori-3.22.4/help/pl/playing.page hitori-3.31.0/help/pl/playing.page --- hitori-3.22.4/help/pl/playing.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/pl/playing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,27 +0,0 @@ - - - - - - Gra Hitori. - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - Gra - -

Aby rozpocząć nową grę, wybierz GraNowa gra. Jeśli jakaś gra jest już rozgrywana, to Hitori zapyta, czy ją przerwać.

-

Kliknij komórkę, aby ją wymazać. Kliknij ją drugi raz, aby cofnąć. Kiedy komórki będą wymazane w sposób, który nie łamie żadnej z trzech reguł, gra się skończy i plansza stanie się nieaktywna.

-

Hitori umożliwia także wyróżnianie komórek jako pomoc przy rozwiązywaniu planszy. Można to zrobić przytrzymując klawisz Ctrl lub Shift i klikając komórkę. Każdy klawisz wyróżnia komórkę w inny sposób, i można wyróżniać komórkę na oba sposoby jednocześnie. Wyróżnienie komórki można usunąć klikając ją drugi raz, także przytrzymując klawisz Ctrl lub Shift.

-

Aby cofnąć lub ponowić ruch, wybierz GraCofnij lub GraPonów. Można cofać i ponawiać ruchy bez ograniczeń.

-

Aby uzyskać podpowiedź, wybierz GraPodpowiedź. Jedna z komórek zostanie wyróżniona czerwoną obwódką, co pokazuje, że jej obecny stan (wymazana lub niewymazana) jest niewłaściwy, i powinien zostać zmieniony, aby wygrać.

- diff -Nru hitori-3.22.4/help/pl/pl.po hitori-3.31.0/help/pl/pl.po --- hitori-3.22.4/help/pl/pl.po 2017-09-22 09:21:15.000000000 +0000 +++ hitori-3.31.0/help/pl/pl.po 2019-02-19 16:41:30.000000000 +0000 @@ -1,13 +1,13 @@ # Polish translation for hitori help. # Copyright © 2017 the hitori authors. -# This file is distributed under the same license as the hitori package. +# This file is distributed under the same license as the hitori help. # Piotr Drąg , 2017. # Aviary.pl , 2017. # msgid "" msgstr "" "Project-Id-Version: hitori-help\n" -"POT-Creation-Date: 2017-08-13 15:57+0000\n" +"POT-Creation-Date: 2017-12-06 17:27+0000\n" "PO-Revision-Date: 2017-08-31 02:12+0200\n" "Last-Translator: Piotr Drąg \n" "Language-Team: Polish \n" diff -Nru hitori-3.22.4/help/pl/strategy.page hitori-3.31.0/help/pl/strategy.page --- hitori-3.22.4/help/pl/strategy.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/pl/strategy.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,27 +0,0 @@ - - - - - - Strategie gry w Hitori. - - - Piotr Drąg - piotrdrag@gmail.com - 2017 - - - - Aviary.pl - community-poland@mozilla.org - 2017 - - - Strategie gry - -

Gra Hitori jest całkiem podobna do Sudoku w tym, że wymaga logicznej dedukcji do rozgryzienia, które komórki wymazać. Jedną ze strategii jest używanie wyróżniania klawiszem Shift dla wszystkich powtarzających się liczb w każdej kolumnie oraz klawiszem Ctrl dla wszystkich powtarzających się liczb w każdym wierszu.

-

Po skończeniu dla całej planszy komórki wyróżnione na oba sposoby są dobrymi kandydatami do wymazania, chociaż nie pewniakami. Usuwanie wyróżnienia z pozostałych komórek z tą samą liczbą w tym samym rzędzie i kolumnie podczas wymazywania jest dobrym pomysłem na pilnowanie, które komórki nadal łamią pierwszą regułę.

-

Należy zawsze pamiętać, że druga reguła oznacza, że dwie sąsiednie komórki nie mogą być wymazane. Hitori wyróżni na czerwono komórki łamiące tę regułę, a także grupy komórek łamiące trzecią regułę, niepozwalającą na rozdzielanie jednej lub więcej niewymazanych komórek od pozostałych.

- -

W razie problemów można wybrać GraPodpowiedź, a Hitori oznaczy komórkę do wymazania lub cofnięcia wymazania, przybliżając do znalezienia rozwiązania.

- diff -Nru hitori-3.22.4/help/pt_BR/pt_BR.po hitori-3.31.0/help/pt_BR/pt_BR.po --- hitori-3.22.4/help/pt_BR/pt_BR.po 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/help/pt_BR/pt_BR.po 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1,334 @@ +# Brazilian Portuguese translation for hitori. +# Copyright (C) 2018 hitori's COPYRIGHT HOLDER +# This file is distributed under the same license as the hitori package. +# Rafael Fontenelle , 2018. +msgid "" +msgstr "" +"Project-Id-Version: hitori master\n" +"POT-Creation-Date: 2018-04-03 12:36+0000\n" +"PO-Revision-Date: 2018-07-12 12:11-0200\n" +"Last-Translator: Rafael Fontenelle \n" +"Language-Team: Brazilian Portuguese \n" +"Language: pt_BR\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=(n > 1);\n" +"X-Generator: Virtaal 1.0.0-beta1\n" + +#. Put one translator per line, in the form NAME , YEAR1, YEAR2 +msgctxt "_" +msgid "translator-credits" +msgstr "Rafael Fontenelle , 2018." + +#. (itstool) path: info/desc +#: C/customization.page:6 +msgid "Changing how the game appears and plays." +msgstr "Mudando como o jogo aparece e joga." + +#. (itstool) path: page/title +#: C/customization.page:8 +msgid "Customizing the Game" +msgstr "Personalizando o jogo" + +#. (itstool) path: page/p +#: C/customization.page:10 +msgid "" +"The game can be customized by changing the board size — boards from 5–10 " +"cells square are allowed." +msgstr "" +"O jogo pode ser personalizado alterando o tamanho do tabuleiro — são " +"permitidos tabuleiros de 5 a 10 células quadradas." + +#. (itstool) path: page/p +#: C/customization.page:11 +msgid "" +"To change the board size, choose an option from GameBoard Size. Hitori will ask if you want to stop the current game if you're in the middle " +"of one, then start a new game with the requested board size." +msgstr "" +"Para alterar o tamanho do tabuleiro, escolha uma opção de JogoTamanho do tabuleiro. O Hitori perguntará se você desejar parar o jogo atual " +"se estiver no meio de um, e então iniciar um novo jogo com o tamanho do " +"tabuleiro solicitado." + +#. (itstool) path: info/desc +#: C/game.page:6 +msgid "Introduction to the game of Hitori." +msgstr "Introdução ao jogo de Hitori." + +#. (itstool) path: page/title +#: C/game.page:8 +msgid "Hitori the Game" +msgstr "Hitori, o jogo" + +#. (itstool) path: page/p +#: C/game.page:10 +msgid "" +"Hitori is a small logic puzzle in a similar vein to the more popular Sudoku. " +"In the game, the player starts with a square board of numbers, and has to " +"paint out cells until there are no duplicate numbers in each row " +"and column. The following rules apply:" +msgstr "" +"Hitori é um pequeno quebra-cabeças lógico semelhante ao Sudoku mais popular. " +"No jogo, o jogador começa com um tabuleiro quadrado de números e tem que " +"pintar células até que não haja números duplicados em cada linha e " +"coluna. As seguintes regras se aplicam:" + +#. (itstool) path: item/p +#: C/game.page:13 +msgid "" +"There must only be one of each number in the unpainted cells in each row and " +"column." +msgstr "" +"Deve haver apenas um de cada número nas células não pintadas em cada linha e " +"coluna." + +#. (itstool) path: item/p +#: C/game.page:14 +msgid "No painted cell may be adjacent to another, vertically or horizontally." +msgstr "" +"Nenhuma célula pintada pode estar adjacente a outra, vertical ou " +"horizontalmente." + +#. (itstool) path: item/p +#: C/game.page:15 +msgid "" +"All the unpainted cells must be joined together vertically and horizontally " +"in one group." +msgstr "" +"Todas as células não pintadas devem ser unidas vertical e horizontalmente em " +"um grupo." + +#. (itstool) path: page/p +#: C/game.page:17 +msgid "" +"These are the only three rules of the game, and so there may well be " +"multiple solutions to a Hitori puzzle board." +msgstr "" +"Estas são as únicas três regras do jogo, e assim pode haver várias soluções " +"para um tabuleiro de quebra-cabeças Hitori." + +#. (itstool) path: figure/title +#: C/game.page:20 +msgid "Main game window" +msgstr "Janela principal do jogo" + +#. (itstool) path: figure/desc +#: C/game.page:21 +msgid "Hitori main window" +msgstr "Janela principal do Hitori" + +#. (itstool) path: figure/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/game.page:22 +msgctxt "_" +msgid "" +"external ref='figures/hitori_main_window.png' " +"md5='b6ea3ee1ff73311d002cfdb4463032be'" +msgstr "" +"external ref='figures/hitori_main_window.png' " +"md5='b6ea3ee1ff73311d002cfdb4463032be'" + +#. (itstool) path: media/p +#: C/game.page:23 +msgid "Hitori main window." +msgstr "Janela principal do Hitori." + +#. (itstool) path: credit/name +#: C/index.page:6 +msgid "Philip Withnall" +msgstr "Philip Withnall" + +#. (itstool) path: credit/years +#: C/index.page:8 +msgid "2008–2010" +msgstr "2008–2010" + +#. (itstool) path: license/p +#: C/index.page:11 +msgid "" +"This work is licensed under a Creative Commons Attribution-Share Alike 3.0 Unported " +"License." +msgstr "" +"Este trabalho está licenciado sob uma licença Creative Commons " +"Atribuição-CompartilhadaIgual 3.0 Não Adaptada." + +#. (itstool) path: page/title +#: C/index.page:15 +msgid "Hitori Help" +msgstr "Ajuda do Hitori" + +#. (itstool) path: section/title +#: C/index.page:18 +msgid "Basic Gameplay & Usage" +msgstr "Jogabilidade básica & Uso" + +#. (itstool) path: section/title +#: C/index.page:22 +msgid "Tips & Tricks" +msgstr "Dicas & Truques" + +#. (itstool) path: p/link +#: C/legal.xml:5 +msgid "Creative Commons Attribution-ShareAlike 3.0 Unported License" +msgstr "Creative Commons Atribuição-CompartilhadaIgual 3.0 Não Adaptada" + +#. (itstool) path: license/p +#: C/legal.xml:4 +msgid "This work is licensed under a <_:link-1/>." +msgstr "Esse trabalho está licenciado sob uma licença <_:link-1/>." + +#. (itstool) path: info/desc +#: C/playing.page:6 +msgid "Using Hitori to play a game." +msgstr "Usando Hitori para jogar um jogo." + +#. (itstool) path: page/title +#: C/playing.page:8 +msgid "Playing a Game" +msgstr "Jogando um jogo" + +#. (itstool) path: page/p +#: C/playing.page:10 +msgid "" +"To start a new game, choose GameNew Game. If you are already playing a game, " +"Hitori will ask if you want to stop the current game." +msgstr "" +"Para iniciar um novo jogo, escolha JogoNovo jogo. Se você já estiver " +"jogando, o Hitori perguntará se você deseja parar o jogo atual." + +#. (itstool) path: page/p +#: C/playing.page:12 +msgid "" +"To paint a cell, click on it; to unpaint it again, click on it again. When " +"cells are painted such that none of the three rules are broken, the game " +"will end and the board may no longer be manipulated." +msgstr "" +"Para pintar uma célula, clique nela; para desfazer a pintura, clique nela " +"novamente. Quando as células são pintadas de tal forma que nenhuma das três " +"regras sejam quebradas, o jogo terminará e o tabuleiro não poderá mais ser " +"manipulado." + +#. (itstool) path: page/p +#: C/playing.page:14 +msgid "" +"Hitori also allows you to highlight cells for your own reference " +"when solving a board. This can be achieved by holding Ctrl or " +"Shift and clicking on a cell. They both highlight cells " +"differently, and cells can be highlighted in both manners at the same time. " +"Highlighted cells can be de-highlighted by clicking on them again while " +"holding either Ctrl or Shift again." +msgstr "" +"O Hitori também permite destacar células para sua própria " +"referência ao resolver um tabuleiro. Isso pode ser feito pressionando " +"Ctrl ou Shift e clicando em uma célula. Ambos destacam " +"as células de maneira diferente e as células podem ser destacadas de ambas " +"as maneiras ao mesmo tempo. Pode-se desfazer o destaque de células " +"destacadas clicando nelas novamente, mantendo pressionadas as teclas " +"Ctrl ou Shift." + +#. (itstool) path: page/p +#: C/playing.page:18 +msgid "" +"To undo or redo a move, choose GameUndo or GameRedo. You may undo or redo as " +"many moves as you like without restriction." +msgstr "" +"Para desfazer e refazer um movimento, escolha JogoDesfazer ou JogoRefazer. " +"Você pode desfazer e refazer quantos movimentos você quiser sem restrição." + +#. (itstool) path: page/p +#: C/playing.page:21 +msgid "" +"To get a hint on which cells to paint out, choose GameHint. A cell will be " +"highlighted with a flashing red outline. This shows that the current status " +"of the cell (painted or unpainted) is incorrect, and should be changed for " +"the game to be won." +msgstr "" +"Para obter uma dica sobre quais células pintar, escolha JogoDica. Uma célula " +"será destacada com um contorno vermelho intermitente. Isso mostra que o " +"status atual da célula (pintado ou não) está incorreto e deve ser alterado " +"para que o jogo seja vencido." + +#. (itstool) path: info/desc +#: C/strategy.page:6 +msgid "Strategies for playing Hitori." +msgstr "Estratégias para jogar Hitori." + +#. (itstool) path: page/title +#: C/strategy.page:8 +msgid "Gameplay Strategies" +msgstr "Estratégias de jogabilidade" + +#. (itstool) path: page/p +#: C/strategy.page:10 +msgid "" +"Hitori is quite similar to Sudoku, in that it takes logical deduction to " +"work out which cells to paint out. One strategy is to use Shift-" +"clicking to highlight all the repeated numbers in each column, then " +"use Ctrl-clicking to highlight all the repeated numbers in each " +"row." +msgstr "" +"Hitori é bastante semelhante ao Sudoku, na medida em que é preciso dedução " +"lógica para descobrir quais células pintar. Uma estratégia é usar o clique " +"com Shift para destacar todos os números repetidos em cada " +"coluna, então use clique com Ctrl para destacar todos os " +"números repetidos em cada linha." + +#. (itstool) path: page/p +#: C/strategy.page:13 +msgid "" +"Once this is done for the entire board, the cells which have been " +"highlighted both ways are good candidates for painting, although not always. " +"When painting a cell, unhighlighting the other cells with the same number in " +"the same row and column as that cell is a good way to keep track of which " +"cells are still violating rule 1 of Hitori." +msgstr "" +"Uma vez feito isso para todo o tabuleiro, as células que foram destacadas " +"para os dois lados são boas candidatas para a pintura, embora nem sempre. Ao " +"pintar uma célula, retirar o destaque das outras células com o mesmo número " +"na mesma linha e coluna, essa célula é uma boa maneira de rastrear quais " +"células ainda estão violando a regra 1 do Hitori." + +#. (itstool) path: page/p +#: C/strategy.page:16 +msgid "" +"Always bear in mind that rule 2 of Hitori means that two adjacent cells " +"can't both be painted. Hitori will highlight in red the cells " +"which violate rule 2. Similarly, groups of cells which violate rule 3 by " +"separating one or more unpainted cells from the other unpainted cells will " +"be highlighted in red." +msgstr "" +"Tenha sempre em mente que a regra 2 de Hitori significa que duas células " +"adjacentes não podem ser pintadas. Hitori destacará em vermelho " +"as células que violam a regra 2. Da mesma forma, grupos de células que " +"violam a regra 3 separando uma ou mais células não pintadas das outras " +"células não pintadas serão destacadas em vermelho." + +#. (itstool) path: page/p +#: C/strategy.page:20 +msgid "" +"If you get stuck at any point, choose GameHint for Hitori to " +"flag a cell which should be painted or unpainted to move closer to a " +"solution." +msgstr "" +"Se você ficar preso a qualquer momento, escolha JogoDica para Hitori para sinalizar uma célula que deve ser pintada ou não pintada para se " +"aproximar de uma solução." diff -Nru hitori-3.22.4/help/ro/customization.page hitori-3.31.0/help/ro/customization.page --- hitori-3.22.4/help/ro/customization.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/ro/customization.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,12 +0,0 @@ - - - - - - Schimbarea modului de aparență și de joacă. - - Personalizarea jocului - -

Jocul poate fi personalizat prin schimbarea dimensiunii mesei - mese din 5-10 celule pătrate sunt permise.

-

Pentru a modifica dimensiunea mesei alegeți o opțiune din JocMărime masă. Hitori va întreba dacă doriți să opriți jocul actual, dacă vă aflați în mijlocul unuia, apoi va începe un joc nou cu dimensiunea mesei solicitate.

- Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/help/ro/figures/hitori_main_window.png and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/help/ro/figures/hitori_main_window.png differ diff -Nru hitori-3.22.4/help/ro/game.page hitori-3.31.0/help/ro/game.page --- hitori-3.22.4/help/ro/game.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/ro/game.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,25 +0,0 @@ - - - - - - Introducere în jocul de Hitori. - - Jocul Hitori - -

Hitori este un mic puzzle logic similar popularului Sudoku. În joc, jucătorul începe cu o tablă pătrată de numere și trebuie să picteze celulele până nu există mai multe numere identice în fiecare rând și coloană. Se aplică următoarele reguli:

- -

Trebuie să fie doar unul din fiecare număr în celulele nepictate în fiecare rând și coloană.

 -

Nici o celulă pictată nu poate fi adiacentă cu alta, vertical sau orizontal.

 -

Toate celulele nepicate trebuiesc alăturate împreună vertical și orizontal într-un singur grup.

 - -

Acestea sunt doar trei reguli de joc, și deci pot fi mai multe soluții pentru o masă de puzzle Hitori.

- -
- Fereastra principală de joc - Fereastra principală Hitori - -

Fereastra principală Hitori.

- -
- diff -Nru hitori-3.22.4/help/ro/index.page hitori-3.31.0/help/ro/index.page --- hitori-3.22.4/help/ro/index.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/ro/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ - - - - - - Philip Withnall - philip@tecnocode.co.uk - 2008–2010 - - -

Această lucrare este licențiată sub Creative Commons Attribution-Share Alike 3.0 Unported License.

- - - Ajutor Hitori - -
- Utilizarea și jocul rudimentar -
- -
- Sfaturi și trucuri -
- diff -Nru hitori-3.22.4/help/ro/legal.xml hitori-3.31.0/help/ro/legal.xml --- hitori-3.22.4/help/ro/legal.xml 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/ro/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,8 +0,0 @@ - - - -

This work is licensed under a - Creative Commons - Attribution-ShareAlike 3.0 Unported License.

- - diff -Nru hitori-3.22.4/help/ro/playing.page hitori-3.31.0/help/ro/playing.page --- hitori-3.22.4/help/ro/playing.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/ro/playing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,15 +0,0 @@ - - - - - - Utilizarea Hitori pentru a juca un joc. - - Jucarea unei partide - -

Pentru a porni un nou joc, alegeți JocJoc nou. Dacă jucați deja un alt joc, Hitori vă va întreba dacă doriți să opriți jocul curent.

-

Pentru a picta o celulă, apăsați pe ea; pentru a o depicta, apăsați pe ea din nou. Atunci când celulele sunt pictate astfel că niciuna din cele trei regulile nu sunt încălcate, jocul se va termina și masa nu mai poate fi manipulată.

-

Hitori de asemenea, vă permite să evidențiați celulele de referință pentru dumneavoastră atunci când rezolvați o masă. Acest lucru poate fi realizat prin menținerea Ctrl sau Shift și făcând clic pe acea celulă. Amândouă evidențiază celulele diferit și celulele pot fi evidențiate în ambele maniere, în același timp. Celulele evidențiate pot fi de-evidențiate, apăsând pe ele din nou, în timp ce mențineți, fie Ctrl sau Shift din nou.

-

Pentru a anula sau a reface o mișcare alegeți JocAnulează sau JocRefă. Puteți anula sau a reface, atâtea mutări câte doriți fără nici o restricție.

-

Pentru a obține un indiciu despre care celule trebuiesc pictate, selectați JocIndiciu. O celulă va fi evidențiată cu un contur roșu intermitent. Acest lucru arată că starea actuală a acelei celule (pictată sau nu) este incorectă și ar trebui să fie schimbată pentru ca jocul să fie câștigat.

- diff -Nru hitori-3.22.4/help/ro/ro.po hitori-3.31.0/help/ro/ro.po --- hitori-3.22.4/help/ro/ro.po 2016-12-20 13:30:40.000000000 +0000 +++ hitori-3.31.0/help/ro/ro.po 2019-02-19 16:41:30.000000000 +0000 @@ -7,90 +7,205 @@ msgid "" msgstr "" "Project-Id-Version: hitori master\n" -"POT-Creation-Date: 2011-06-19 10:21+0000\n" -"PO-Revision-Date: 2012-08-05 23:02+0200\n" +"POT-Creation-Date: 2017-02-26 08:18+0000\n" +"PO-Revision-Date: 2019-02-14 19:52+0100\n" "Last-Translator: Daniel Șerbănescu \n" -"Language-Team: Gnome Romanian Translation Team\n" +"Language-Team: Gnome Romanian Translation Team \n" "Language: ro\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < " -"20)) ? 1 : 2);;\n" -"X-Generator: Virtaal 0.7.0\n" +"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n==0 || (n!=1 && n%100>=1 && n" +"%100<=19) ? 1 : 2);\n" +"X-Generator: Poedit 2.2.1\n" +"X-Poedit-SourceCharset: UTF-8\n" -#: C/strategy.page:5(desc) -msgid "Strategies for playing Hitori." -msgstr "Strategii pentru a juca Hitori." +#. Put one translator per line, in the form NAME , YEAR1, YEAR2 +msgctxt "_" +msgid "translator-credits" +msgstr "" +"Iacobescu Cristian 2010, 2011\n" +"Daniel Șerbănescu 2019" -#: C/strategy.page:7(title) -msgid "Gameplay Strategies" -msgstr "Strategii de joc" +#. (itstool) path: info/desc +#: C/customization.page:6 +msgid "Changing how the game appears and plays." +msgstr "Schimbarea modului de aparență și de joacă." + +#. (itstool) path: page/title +#: C/customization.page:8 +msgid "Customizing the Game" +msgstr "Personalizarea jocului" -#: C/strategy.page:9(p) +#. (itstool) path: page/p +#: C/customization.page:10 msgid "" -"Hitori is quite similar to Sudoku, in that it takes logical deduction to " -"work out which cells to paint out. One strategy is to use Shift-" -"clicking to highlight all the repeated numbers in each column, then " -"use Ctrl-clicking to highlight all the repeated numbers in each " -"row." +"The game can be customized by changing the board size — boards from 5–10 " +"cells square are allowed." msgstr "" -"Hitori este destul de similar cu Sudoku, în care este nevoie de deducție " -"logică pentru a determina care celule trebuiesc pictate. O strategie este de " -"a utiliza Shift-clic pentru a evidenția toate numerele ce se " -"repetă în fiecare coloană, apoi utilizați Ctrl-clic " -"pentru a evidenția toate numerele ce se repetă în fiecare rând." +"Jocul poate fi personalizat prin schimbarea dimensiunii mesei - mese din " +"5-10 celule pătrate sunt permise." -#: C/strategy.page:12(p) +#. (itstool) path: page/p +#: C/customization.page:11 msgid "" -"Once this is done for the entire board, the cells which have been " -"highlighted both ways are good candidates for painting, although not always. " -"When painting a cell, unhighlighting the other cells with the same number in " -"the same row and column as that cell is a good way to keep track of which " -"cells are still violating rule 1 of Hitori." +"To change the board size, choose an option from GameBoard Size. Hitori will ask if you want to stop the current game if you're in the middle " +"of one, then start a new game with the requested board size." msgstr "" -"Odată ce acest lucru se face pentru întreaga masă, celulele care au fost " -"evidențiate în ambele sensuri sunt bune candidate pentru pictare, deși nu " -"întotdeauna. Când o celulă este pictată, neevidențierea altor celule cu " -"același număr în același rând și coloană ca acea celula este o modalitate " -"bună de a urmări care celulele încă încalcă regula 1 din " -"Hitori." +"Pentru a modifica dimensiunea mesei alegeți o opțiune din JocMărime masă. " +"Hitori va întreba dacă doriți să opriți jocul actual, dacă vă " +"aflați în mijlocul unuia, apoi va începe un joc nou cu dimensiunea mesei " +"solicitate." -#: C/strategy.page:15(p) +#. (itstool) path: info/desc +#: C/game.page:6 +msgid "Introduction to the game of Hitori." +msgstr "Introducere în jocul de Hitori." + +#. (itstool) path: page/title +#: C/game.page:8 +msgid "Hitori the Game" +msgstr "Jocul Hitori" + +#. (itstool) path: page/p +#: C/game.page:10 msgid "" -"Always bear in mind that rule 2 of Hitori means that two adjacent cells " -"can't both be painted. Hitori will highlight in red the cells " -"which violate rule 2. Similarly, groups of cells which violate rule 3 by " -"separating one or more unpainted cells from the other unpainted cells will " -"be highlighted in red." +"Hitori is a small logic puzzle in a similar vein to the more popular Sudoku. " +"In the game, the player starts with a square board of numbers, and has to " +"paint out cells until there are no duplicate numbers in each row " +"and column. The following rules apply:" msgstr "" -"Întotdeauna țineți minte că regula 2 din Hitori înseamnă că două celule " -"adiacente nu pot fi ambele pictate. Hitori va evidenția în roșu " -"celulele care încalcă regula 2. În mod similar, grupuri de celule care " -"încalcă regula 3, prin separarea a uneia sau mai multe celule nepictate de " -"alte celule nepictate vor fi evidențiate în roșu." +"Hitori este un mic puzzle logic similar popularului Sudoku. În joc, " +"jucătorul începe cu o tablă pătrată de numere și trebuie să picteze " +"celulele până nu există mai multe numere identice în fiecare rând și " +"coloană. Se aplică următoarele reguli:" -#: C/strategy.page:19(p) +#. (itstool) path: item/p +#: C/game.page:13 msgid "" -"If you get stuck at any point, choose GameHint for Hitori to " -"flag a cell which should be painted or unpainted to move closer to a " -"solution." +"There must only be one of each number in the unpainted cells in each row and " +"column." msgstr "" -"Dacă rămâneți blocat în orice moment, alegeți JocIndiciu pentru ca " -"Hitori să semnalizeze o celulă care ar trebui să fie pictată sau " -"depictată, pentru a se apropia de o soluție." +"Trebuie să fie doar unul din fiecare număr în celulele nepictate în fiecare " +"rând și coloană." + +#. (itstool) path: item/p +#: C/game.page:14 +msgid "No painted cell may be adjacent to another, vertically or horizontally." +msgstr "" +"Nici o celulă pictată nu poate fi adiacentă cu alta, vertical sau orizontal." + +#. (itstool) path: item/p +#: C/game.page:15 +msgid "" +"All the unpainted cells must be joined together vertically and horizontally " +"in one group." +msgstr "" +"Toate celulele nepicate trebuiesc alăturate împreună vertical și orizontal " +"într-un singur grup." + +#. (itstool) path: page/p +#: C/game.page:17 +msgid "" +"These are the only three rules of the game, and so there may well be " +"multiple solutions to a Hitori puzzle board." +msgstr "" +"Acestea sunt doar trei reguli de joc, și deci pot fi mai multe soluții " +"pentru o masă de puzzle Hitori." + +#. (itstool) path: figure/title +#: C/game.page:20 +msgid "Main game window" +msgstr "Fereastra principală de joc" + +#. (itstool) path: figure/desc +#: C/game.page:21 +msgid "Hitori main window" +msgstr "Fereastra principală Hitori" + +#. (itstool) path: figure/media +#. This is a reference to an external file such as an image or video. When +#. the file changes, the md5 hash will change to let you know you need to +#. update your localized copy. The msgstr is not used at all. Set it to +#. whatever you like once you have updated your copy of the file. +#: C/game.page:22 +msgctxt "_" +msgid "" +"external ref='figures/hitori_main_window.png' " +"md5='b6ea3ee1ff73311d002cfdb4463032be'" +msgstr "" +"external ref='figures/hitori_main_window.png' " +"md5='37d4edd9d19a19ca58d0e987257a2622'" -#: C/playing.page:5(desc) +#. (itstool) path: media/p +#: C/game.page:23 +msgid "Hitori main window." +msgstr "Fereastra principală Hitori." + +#. (itstool) path: credit/name +#: C/index.page:6 +msgid "Philip Withnall" +msgstr "Philip Withnall" + +#. (itstool) path: credit/years +#: C/index.page:8 +msgid "2008–2010" +msgstr "2008–2010" + +#. (itstool) path: license/p +#: C/index.page:11 +msgid "" +"This work is licensed under a Creative Commons Attribution-Share Alike 3.0 Unported " +"License." +msgstr "" +"Această lucrare este licențiată sub Creative Commons Attribution-Share Alike 3.0 Unported " +"License." + +#. (itstool) path: page/title +#: C/index.page:15 +msgid "Hitori Help" +msgstr "Ajutor Hitori" + +#. (itstool) path: section/title +#: C/index.page:18 +msgid "Basic Gameplay & Usage" +msgstr "Utilizarea și jocul rudimentar" + +#. (itstool) path: section/title +#: C/index.page:22 +msgid "Tips & Tricks" +msgstr "Sfaturi și trucuri" + +#. (itstool) path: p/link +#: C/legal.xml:5 +msgid "Creative Commons Attribution-ShareAlike 3.0 Unported License" +msgstr "" +"licență CreativeCommons Atribuire-Distribuire în condiții identice 3.0 Ne-" +"adaptată." + +#. (itstool) path: license/p +#: C/legal.xml:4 +msgid "This work is licensed under a <_:link-1/>." +msgstr "Această lucrare este licențiată sub o <_:link-1/>." + +#. (itstool) path: info/desc +#: C/playing.page:6 msgid "Using Hitori to play a game." msgstr "Utilizarea Hitori pentru a juca un joc." -#: C/playing.page:7(title) +#. (itstool) path: page/title +#: C/playing.page:8 msgid "Playing a Game" msgstr "Jucarea unei partide" -#: C/playing.page:9(p) +#. (itstool) path: page/p +#: C/playing.page:10 msgid "" "To start a new game, choose GameNew Game. If you are already playing a game, " @@ -100,7 +215,8 @@ "style=\"menuitem\">Joc nou. Dacă jucați deja un alt joc, " "Hitori vă va întreba dacă doriți să opriți jocul curent." -#: C/playing.page:11(p) +#. (itstool) path: page/p +#: C/playing.page:12 msgid "" "To paint a cell, click on it; to unpaint it again, click on it again. When " "cells are painted such that none of the three rules are broken, the game " @@ -111,7 +227,8 @@ "regulile nu sunt încălcate, jocul se va termina și masa nu mai poate fi " "manipulată." -#: C/playing.page:13(p) +#. (itstool) path: page/p +#: C/playing.page:14 msgid "" "Hitori also allows you to highlight cells for your own reference " "when solving a board. This can be achieved by holding Ctrl or " @@ -128,20 +245,21 @@ "evidențiate pot fi de-evidențiate, apăsând pe ele din nou, în timp ce " "mențineți, fie Ctrl sau Shift din nou." -#: C/playing.page:17(p) +#. (itstool) path: page/p +#: C/playing.page:18 msgid "" "To undo or redo a move, choose GameUndo or GameRedo. You may undo or redo as " "many moves as you like without restriction." msgstr "" -"Pentru a anula sau a reface o mișcare alegeți JocAnulează sau " -"JocRefă. Puteți anula sau a reface, atâtea " -"mutări câte doriți fără nici o restricție." +"Pentru a anula sau a reface o mișcare alegeți JocAnulează sau JocRefă. Puteți " +"anula sau a reface, atâtea mutări câte doriți fără nici o restricție." -#: C/playing.page:20(p) +#. (itstool) path: page/p +#: C/playing.page:21 msgid "" "To get a hint on which cells to paint out, choose GameHint. A cell will be " @@ -150,226 +268,137 @@ "the game to be won." msgstr "" "Pentru a obține un indiciu despre care celule trebuiesc pictate, selectați " -"JocIndiciu. O celulă va fi evidențiată cu un " -"contur roșu intermitent. Acest lucru arată că starea actuală a acelei celule " -"(pictată sau nu) este incorectă și ar trebui să fie schimbată pentru ca " -"jocul să fie câștigat." - -#: C/license.page:8(desc) -msgid "Legal information." -msgstr "Informații legale." - -#: C/license.page:11(title) -msgid "License" -msgstr "Licență" - -#: C/license.page:12(p) -msgid "" -"This work is distributed under a CreativeCommons Attribution-Share Alike 3.0 " -"Unported license." -msgstr "" -"Această lucrare este distribuită sub CreativeCommons Attribution-Share Alike " -"3.0 Unported." - -#: C/license.page:20(p) -msgid "You are free:" -msgstr "Sunteți liber să:" - -#: C/license.page:25(em) -msgid "To share" -msgstr "Să împărtășiți" +"JocIndiciu. O celulă va fi evidențiată cu un contur roșu intermitent. Acest " +"lucru arată că starea actuală a acelei celule (pictată sau nu) este " +"incorectă și ar trebui să fie schimbată pentru ca jocul să fie câștigat." -#: C/license.page:26(p) -msgid "To copy, distribute and transmit the work." -msgstr "Să copiați, distribuiți și transmiteți lucrarea." - -#: C/license.page:29(em) -msgid "To remix" -msgstr "Să modificați" - -#: C/license.page:30(p) -msgid "To adapt the work." -msgstr "Să adaptați lucrarea." - -#: C/license.page:33(p) -msgid "Under the following conditions:" -msgstr "În conformitate cu condițiile următoare:" - -#: C/license.page:38(em) -msgid "Attribution" -msgstr "Atribuire" - -#: C/license.page:39(p) -msgid "" -"You must attribute the work in the manner specified by the author or " -"licensor (but not in any way that suggests that they endorse you or your use " -"of the work)." -msgstr "" -"Trebuie să atribuiți programul în maniera specificată de autor sau " -"licențiator (dar nu într-un mod care sugerează că ei vă vizează pe " -"dumneavoastră sau utilizarea dumneavoastră a programului)." - -#: C/license.page:46(em) -msgid "Share Alike" -msgstr "În condiții identice" - -#: C/license.page:47(p) -msgid "" -"If you alter, transform, or build upon this work, you may distribute the " -"resulting work only under the same, similar or a compatible license." -msgstr "" -"Dacă modificați, transformați, sau construiți pe baza acestui program, " -"puteți distribui lucrarea rezultată numai sub aceeași, similară sau " -"compatibilă licență." - -#: C/license.page:53(p) -msgid "" -"For the full text of the license, see the CreativeCommons website, or read the full Commons Deed." -msgstr "" -"Pentru textul integral al licenței, consultați saitul " -"CreativeCommons, sau citiți întregul Commons Deed." - -#: C/index.page:6(name) -msgid "Philip Withnall" -msgstr "Philip Withnall" - -#: C/index.page:7(email) -msgid "philip@tecnocode.co.uk" -msgstr "philip@tecnocode.co.uk" - -#: C/index.page:8(years) -msgid "2008–2010" -msgstr "2008–2010" - -#: C/index.page:11(p) -msgid "" -"This work is licensed under a Creative Commons Attribution-Share Alike 3.0 Unported " -"License." -msgstr "" -"Această lucrare este licențiată sub Creative Commons " -"Attribution-Share Alike 3.0 Unported License." - -#: C/index.page:15(title) -msgid "Hitori Help" -msgstr "Ajutor Hitori" - -#: C/index.page:18(title) -msgid "Basic Gameplay & Usage" -msgstr "Utilizarea și jocul rudimentar" - -#: C/index.page:22(title) -msgid "Tips & Tricks" -msgstr "Sfaturi și trucuri" - -#. When image changes, this message will be marked fuzzy or untranslated for you. -#. It doesn't matter what you translate it to: it's not used at all. -#: C/game.page:21(None) -msgid "" -"@@image: 'figures/hitori_main_window.png'; " -"md5=b6ea3ee1ff73311d002cfdb4463032be" -msgstr "" -"@@image: 'figures/hitori_main_window.png'; " -"md5=b6ea3ee1ff73311d002cfdb4463032be" - -#: C/game.page:5(desc) -msgid "Introduction to the game of Hitori." -msgstr "Introducere în jocul de Hitori." +#. (itstool) path: info/desc +#: C/strategy.page:6 +msgid "Strategies for playing Hitori." +msgstr "Strategii pentru a juca Hitori." -#: C/game.page:7(title) -msgid "Hitori the Game" -msgstr "Jocul Hitori" +#. (itstool) path: page/title +#: C/strategy.page:8 +msgid "Gameplay Strategies" +msgstr "Strategii de joc" -#: C/game.page:9(p) +#. (itstool) path: page/p +#: C/strategy.page:10 msgid "" -"Hitori is a small logic puzzle in a similar vein to the more popular Sudoku. " -"In the game, the player starts with a square board of numbers, and has to " -"paint out cells until there are no duplicate numbers in each row " -"and column. The following rules apply:" +"Hitori is quite similar to Sudoku, in that it takes logical deduction to " +"work out which cells to paint out. One strategy is to use Shift-" +"clicking to highlight all the repeated numbers in each column, then " +"use Ctrl-clicking to highlight all the repeated numbers in each " +"row." msgstr "" -"Hitori este un mic puzzle logic similar popularului Sudoku. În joc, " -"jucătorul începe cu o tablă pătrată de numere și trebuie să picteze " -"celulele până nu există mai multe numere identice în fiecare rând și " -"coloană. Se aplică următoarele reguli:" +"Hitori este destul de similar cu Sudoku, în care este nevoie de deducție " +"logică pentru a determina care celule trebuiesc pictate. O strategie este de " +"a utiliza Shift-clic pentru a evidenția toate numerele ce se " +"repetă în fiecare coloană, apoi utilizați Ctrl-clic " +"pentru a evidenția toate numerele ce se repetă în fiecare rând." -#: C/game.page:12(p) +#. (itstool) path: page/p +#: C/strategy.page:13 msgid "" -"There must only be one of each number in the unpainted cells in each row and " -"column." -msgstr "" -"Trebuie să fie doar unul din fiecare număr în celulele nepictate în fiecare " -"rând și coloană." - -#: C/game.page:13(p) -msgid "No painted cell may be adjacent to another, vertically or horizontally." +"Once this is done for the entire board, the cells which have been " +"highlighted both ways are good candidates for painting, although not always. " +"When painting a cell, unhighlighting the other cells with the same number in " +"the same row and column as that cell is a good way to keep track of which " +"cells are still violating rule 1 of Hitori." msgstr "" -"Nici o celulă pictată nu poate fi adiacentă cu alta, vertical sau orizontal." +"Odată ce acest lucru se face pentru întreaga masă, celulele care au fost " +"evidențiate în ambele sensuri sunt bune candidate pentru pictare, deși nu " +"întotdeauna. Când o celulă este pictată, neevidențierea altor celule cu " +"același număr în același rând și coloană ca acea celula este o modalitate " +"bună de a urmări care celulele încă încalcă regula 1 din " +"Hitori." -#: C/game.page:14(p) +#. (itstool) path: page/p +#: C/strategy.page:16 msgid "" -"All the unpainted cells must be joined together vertically and horizontally " -"in one group." +"Always bear in mind that rule 2 of Hitori means that two adjacent cells " +"can't both be painted. Hitori will highlight in red the cells " +"which violate rule 2. Similarly, groups of cells which violate rule 3 by " +"separating one or more unpainted cells from the other unpainted cells will " +"be highlighted in red." msgstr "" -"Toate celulele nepicate trebuiesc alăturate împreună vertical și orizontal " -"într-un singur grup." +"Întotdeauna țineți minte că regula 2 din Hitori înseamnă că două celule " +"adiacente nu pot fi ambele pictate. Hitori va evidenția în roșu " +"celulele care încalcă regula 2. În mod similar, grupuri de celule care " +"încalcă regula 3, prin separarea a uneia sau mai multe celule nepictate de " +"alte celule nepictate vor fi evidențiate în roșu." -#: C/game.page:16(p) +#. (itstool) path: page/p +#: C/strategy.page:20 msgid "" -"These are the only three rules of the game, and so there may well be " -"multiple solutions to a Hitori puzzle board." +"If you get stuck at any point, choose GameHint for Hitori to " +"flag a cell which should be painted or unpainted to move closer to a " +"solution." msgstr "" -"Acestea sunt doar trei reguli de joc, și deci pot fi mai multe soluții " -"pentru o masă de puzzle Hitori." - -#: C/game.page:19(title) -msgid "Main game window" -msgstr "Fereastra principală de joc" - -#: C/game.page:20(desc) -msgid "Hitori main window" -msgstr "Fereastra principală Hitori" - -#: C/game.page:22(p) -msgid "Hitori main window." -msgstr "Fereastra principală Hitori." +"Dacă rămâneți blocat în orice moment, alegeți JocIndiciu pentru ca " +"Hitori să semnalizeze o celulă care ar trebui să fie pictată sau " +"depictată, pentru a se apropia de o soluție." -#: C/customization.page:5(desc) -msgid "Changing how the game appears and plays." -msgstr "Schimbarea modului de aparență și de joacă." +#~ msgid "Legal information." +#~ msgstr "Informații legale." -#: C/customization.page:7(title) -msgid "Customizing the Game" -msgstr "Personalizarea jocului" +#~ msgid "License" +#~ msgstr "Licență" -#: C/customization.page:9(p) -msgid "" -"The game can be customized by changing the board size — boards from 5–10 " -"cells square are allowed." -msgstr "" -"Jocul poate fi personalizat prin schimbarea dimensiunii mesei - mese din " -"5-10 celule pătrate sunt permise." +#~ msgid "You are free:" +#~ msgstr "Sunteți liber să:" -#: C/customization.page:10(p) -msgid "" -"To change the board size, choose an option from GameBoard Size. Hitori will ask if you want to stop the current game if you're in the middle " -"of one, then start a new game with the requested board size." -msgstr "" -"Pentru a modifica dimensiunea mesei alegeți o opțiune din JocMărime masă. " -"Hitori va întreba dacă doriți să opriți jocul actual, dacă vă " -"aflați în mijlocul unuia, apoi va începe un joc nou cu dimensiunea mesei " -"solicitate." +#~ msgid "To share" +#~ msgstr "Să împărtășiți" + +#~ msgid "To copy, distribute and transmit the work." +#~ msgstr "Să copiați, distribuiți și transmiteți lucrarea." + +#~ msgid "To remix" +#~ msgstr "Să modificați" + +#~ msgid "To adapt the work." +#~ msgstr "Să adaptați lucrarea." + +#~ msgid "Under the following conditions:" +#~ msgstr "În conformitate cu condițiile următoare:" + +#~ msgid "Attribution" +#~ msgstr "Atribuire" + +#~ msgid "" +#~ "You must attribute the work in the manner specified by the author or " +#~ "licensor (but not in any way that suggests that they endorse you or your " +#~ "use of the work)." +#~ msgstr "" +#~ "Trebuie să atribuiți programul în maniera specificată de autor sau " +#~ "licențiator (dar nu într-un mod care sugerează că ei vă vizează pe " +#~ "dumneavoastră sau utilizarea dumneavoastră a programului)." + +#~ msgid "Share Alike" +#~ msgstr "În condiții identice" + +#~ msgid "" +#~ "If you alter, transform, or build upon this work, you may distribute the " +#~ "resulting work only under the same, similar or a compatible license." +#~ msgstr "" +#~ "Dacă modificați, transformați, sau construiți pe baza acestui program, " +#~ "puteți distribui lucrarea rezultată numai sub aceeași, similară sau " +#~ "compatibilă licență." + +#~ msgid "" +#~ "For the full text of the license, see the CreativeCommons " +#~ "website, or read the full Commons Deed." +#~ msgstr "" +#~ "Pentru textul integral al licenței, consultați saitul " +#~ "CreativeCommons, sau citiți întregul Commons Deed." -#. Put one translator per line, in the form of NAME , YEAR1, YEAR2 -#: C/index.page:0(None) -msgid "translator-credits" -msgstr "Iacobescu Cristian 2010, 2011" +#~ msgid "philip@tecnocode.co.uk" +#~ msgstr "philip@tecnocode.co.uk" diff -Nru hitori-3.22.4/help/ro/strategy.page hitori-3.31.0/help/ro/strategy.page --- hitori-3.22.4/help/ro/strategy.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/ro/strategy.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,15 +0,0 @@ - - - - - - Strategii pentru a juca Hitori. - - Strategii de joc - -

Hitori este destul de similar cu Sudoku, în care este nevoie de deducție logică pentru a determina care celule trebuiesc pictate. O strategie este de a utiliza Shift-clic pentru a evidenția toate numerele ce se repetă în fiecare coloană, apoi utilizați Ctrl-clic pentru a evidenția toate numerele ce se repetă în fiecare rând.

-

Odată ce acest lucru se face pentru întreaga masă, celulele care au fost evidențiate în ambele sensuri sunt bune candidate pentru pictare, deși nu întotdeauna. Când o celulă este pictată, neevidențierea altor celule cu același număr în același rând și coloană ca acea celula este o modalitate bună de a urmări care celulele încă încalcă regula 1 din Hitori.

-

Întotdeauna țineți minte că regula 2 din Hitori înseamnă că două celule adiacente nu pot fi ambele pictate. Hitori va evidenția în roșu celulele care încalcă regula 2. În mod similar, grupuri de celule care încalcă regula 3, prin separarea a uneia sau mai multe celule nepictate de alte celule nepictate vor fi evidențiate în roșu.

- -

Dacă rămâneți blocat în orice moment, alegeți JocIndiciu pentru ca Hitori să semnalizeze o celulă care ar trebui să fie pictată sau depictată, pentru a se apropia de o soluție.

- diff -Nru hitori-3.22.4/help/sl/customization.page hitori-3.31.0/help/sl/customization.page --- hitori-3.22.4/help/sl/customization.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/sl/customization.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,12 +0,0 @@ - - - - - - Spreminjanje videza in igranja igre. - - Prilagajanje igre - -

Igro je mogoče prilagoditi s spremembo velikosti plošče - dovoljene so kvadratne plošče s stranico od 5 do 10 celic.

-

Za spremembo velikosti plošče izberite možnost v meniju IgraVelikost plošče. Hitori vas bo v primeru da igrate igro vprašal ali jo želite ustaviti in nato začel novo igro z zahtevano velikostjo plošče.

- diff -Nru hitori-3.22.4/help/sl/game.page hitori-3.31.0/help/sl/game.page --- hitori-3.22.4/help/sl/game.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/sl/game.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,25 +0,0 @@ - - - - - - Uvod v igro Hitori - - Igra Hitori - -

Hitori je majhna logična igra, ki je podobna veliko bolj priljubljenemu Sudokuju. V igri igralec začne s kvadratno ploščo števil, ki jim mora pobarvati dokler v vsaki vrstici in stolpcu ni podvojenih števil. Veljajo naslednja pravila:

- -

Eno od vsakih števil morda biti v nepobarvanih celicah v vsaki vrstici in stolpcu.

 -

Pobarvane celice ne smejo biti druga poleg druge niti navpično ali vodoravno.

 -

Vse nepobarvane celice je treba združiti skupaj tako vodoravno kot navpično v eno skupino.

 - -

Obstajajo samo tri pravila igra zato lahko za rešitev uganke Hitori obstaja več rešitev.

- -
- Glavno okno igre - Glavno okno Hitori - -

Glavno okno Hitori.

- -
- diff -Nru hitori-3.22.4/help/sl/index.page hitori-3.31.0/help/sl/index.page --- hitori-3.22.4/help/sl/index.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/sl/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ - - - - - - Philip Withnall - philip@tecnocode.co.uk - 2008–2010 - - -

To delo je licencirano pod Creative Commons Attribution-Share Alike 3.0 Unported License.

- - - Hitori pomoč - -
- Osnovno igranje in uporaba -
- -
- Namigi & triki -
- diff -Nru hitori-3.22.4/help/sl/legal.xml hitori-3.31.0/help/sl/legal.xml --- hitori-3.22.4/help/sl/legal.xml 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/sl/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,8 +0,0 @@ - - - -

This work is licensed under a - Creative Commons - Attribution-ShareAlike 3.0 Unported License.

- - diff -Nru hitori-3.22.4/help/sl/playing.page hitori-3.31.0/help/sl/playing.page --- hitori-3.22.4/help/sl/playing.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/sl/playing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,15 +0,0 @@ - - - - - - Uporaba Hitorija za igranje igre. - - Igranje igre - -

Za začetek nove igre izberite IgraNova igra. V primeru, da že igrate igro, vas bo Hitori vprašal, če želite ustaviti trenutno igro.

-

Za pobarvanje celice kliknite nanjo. Za odstranitev pobarvanosti ponovno kliknite nanjo. Ko so celice pobarvane tako, da ni prekršeno nobeno od treh pravil, se bo igra končala in z njo ne bo več mogoče upravljati.

-

Hitori vam omogoča poudarjanje celic za vašo evidenco pri reševanju plošče. To lahko dosežete s pritiskom na Ctrl ali Shift in klikom na celico. Tipki celice različno poudarjata. Hkrati je celice mogoče poudariti na oba načina. Poudarjanje celic je mogoče odstraniti s pritiskom naCtrl ali Shift in ponovnim klikom na polje.

-

Za uveljavitev ali razveljavitev poteze izberite IgraRazveljavi ali IgraUveljavi. Poteze lahko uveljavljate ali razveljavljate kot želite brez omejitev.

-

Za namig katere celice pobarvati izberite IgraNamig. Celica bo bila poudarjena z bliskajočim rdečim obrisom. To pokaže, da je trenutno stanje celice (pobarvano ali nepobarvano) napačno in da ga je treba za zmago spremeniti.

- diff -Nru hitori-3.22.4/help/sl/strategy.page hitori-3.31.0/help/sl/strategy.page --- hitori-3.22.4/help/sl/strategy.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/sl/strategy.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,15 +0,0 @@ - - - - - - Strategije za igranje Hitori. - - Strategije igranja - -

Hitori je precej podoben Sudokuju, saj zahteva logično sklepanje s pomočjo katerega ugotovite katere celice je treba pobarvati. Ena strategija je uporaba Shift in klika za poudarjanje ponovljenih števil v vsakem stolpcu. nato uporabite Ctrl in klik za poudarjanje vseh ponovljenih števil v vsaki vrstici.

-

Ko je to storjeno za celotno ploščo so poudarjene celice, ki so poudarjene obakrat dobri kandidati za barvanje, čeprav ne vedno. Pri barvanju celice je odstranjevanje poudarjanja drugih celic z istim številom v isti vrstici in stolpcu kot ta celica dober način za sledenje celicam, ki kršijo prvo pravilo igre Hitori.

-

Vedno imejte v mislih, da pravilo 2 Hitorija pomeni, da dve sosednji celici ne moreta biti hkrati pobarvani. Hitori v rdečem poudaril celice, ki kršijo pravilo 2. Podobno bodo skupine celic, ki kršijo pravilo 3 z ločevanjem ene ali več nepobarvanih celic z drugimi nepobarvanimi celicami, poudarjene z rdečo.

- -

Če kadarkoli obtičite izberite IgraNamig. Hitori bo označil celico, ki jo je treba pobarvati ali pa odstraniti pobarvanost za približanje rešitvi.

- diff -Nru hitori-3.22.4/help/sv/customization.page hitori-3.31.0/help/sv/customization.page --- hitori-3.22.4/help/sv/customization.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/sv/customization.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,24 +0,0 @@ - - - - - - Ändra utseende och beteende på spelet. - - - Daniel Nylander - po@danielnylander.se - 2009 - - - - Erik Sköldås - erik.skoldas@tele2.se - 2015 - - - Anpassa spelet - -

Spelet kan anpassas genom att ändra brädstorleken — bräden med 5–10 celler per sida är möjligt.

-

För att ändra brädstorleken, välj ett alternativ från SpelBrädstorlek. Hitori kommer att fråga om du vill avbryta det pågående spelet, för att sedan starta ett nytt spel med den begärda brädstorleken.

- Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/help/sv/figures/hitori_main_window.png and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/help/sv/figures/hitori_main_window.png differ diff -Nru hitori-3.22.4/help/sv/game.page hitori-3.31.0/help/sv/game.page --- hitori-3.22.4/help/sv/game.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/sv/game.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ - - - - - - Introduktion till spelet Hitori. - - - Daniel Nylander - po@danielnylander.se - 2009 - - - - Erik Sköldås - erik.skoldas@tele2.se - 2015 - - - Spelet Hitori - -

Hitori är ett litet logikpussel i liknande stil som det mer populära spelet Sudoku. I det här spelet startar spelaren med ett kvadratiskt bräde av siffror, och måste tona ner celler tills det inte finns några dubbletter i någon rad eller kolumn. Följande regler gäller:

- -

Det får bara finnas ett av varje nummer i de icke-nedtonade cellerna i varje rad och kolumn.

 -

Inga nedtonade celler kan ligga intill varandra, vertikalt eller horisontellt.

 -

Alla de icke-nedtonade cellerna måste fogas samman vertikalt och horisontellt i en grupp.

 - -

Dessa är de enda tre spelreglerna, så det kan mycket väl finnas flera lösningar på ett Hitoripussel.

- -
- Huvudspelsfönster - Huvudfönster för Hitori - -

Huvudfönster för Hitori.

- -
- diff -Nru hitori-3.22.4/help/sv/index.page hitori-3.31.0/help/sv/index.page --- hitori-3.22.4/help/sv/index.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/sv/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ - - - - - - Philip Withnall - philip@tecnocode.co.uk - 2008–2010 - - -

Det här verket är licensierat under licensen Creative Commons Erkännande-DelaLika 3.0 Unported.

- - - - Daniel Nylander - po@danielnylander.se - 2009 - - - - Erik Sköldås - erik.skoldas@tele2.se - 2015 - - - Hjälp för Hitori - -
- Grundläggande idé & användning -
- -
- Tips & tricks -
- diff -Nru hitori-3.22.4/help/sv/legal.xml hitori-3.31.0/help/sv/legal.xml --- hitori-3.22.4/help/sv/legal.xml 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/sv/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ - - - -

Det här verket är licensierat under licensen Creative Commons Erkännande-DelaLika 3.0 Unported.

- - diff -Nru hitori-3.22.4/help/sv/playing.page hitori-3.31.0/help/sv/playing.page --- hitori-3.22.4/help/sv/playing.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/sv/playing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,27 +0,0 @@ - - - - - - Att använda Hitori för att spela. - - - Daniel Nylander - po@danielnylander.se - 2009 - - - - Erik Sköldås - erik.skoldas@tele2.se - 2015 - - - Spela ett spel - -

För att starta ett nytt spel, välj SpelNytt spel. Om du redan spelar ett spel, kommer Hitori att fråga om du vill avbryta det pågående spelet.

-

För att tona ner en cell, klickar du på den; för att ta bort nedtoningen, klicka på den igen. När cellerna är nedtonade så att ingen av de tre reglerna bryts, är spelet slut och brädet kan inte längre manipuleras.

-

Hitori låter dig också markera celler för egen referens när du löser pusslet. Detta kan åstadkommas genom att trycka Ctrl eller Skift och klicka på en cell. De markerar celler på olika sätt, celler kan markeras på båda sätt samtidigt. Markerade celler kan avmarkeras genom att klicka på dem igen samtidigt som du trycker antingen Ctrl eller Shift återigen.

-

För att ångra eller göra om ett drag, välj SpelÅngra eller SpelGör om. Du kan ångra eller göra om så många drag som du vill utan begränsningar.

-

För att få ett tips om vilken cell man kan tona ner , välj SpelTips. En cell kommer att markeras med blinkande röd kontur. Detta visar att den aktuella statusen för cellen (nedtonad eller icke-nedtonad) är felaktig, och bör ändras för att pusslet ska gå ut.

- diff -Nru hitori-3.22.4/help/sv/strategy.page hitori-3.31.0/help/sv/strategy.page --- hitori-3.22.4/help/sv/strategy.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/sv/strategy.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,27 +0,0 @@ - - - - - - Strategier för att spela Hitori. - - - Daniel Nylander - po@danielnylander.se - 2009 - - - - Erik Sköldås - erik.skoldas@tele2.se - 2015 - - - Spelstrategier - -

Hitori är ganska likt spelet Sudoku, genom att det krävs logisk slutledning för att räkna ut vilka celler att tona ner. En strategi är att använda Skift-klickning för att markera alla de upprepade siffrorna i varje kolumn, och sedan använda Ctrl-klickning för att markera alla de upprepade siffrorna i varje rad.

-

När detta är gjort för hela brädet, är de celler som har blivit markerade i båda riktningarna goda kandidater för att tonas ned, men inte alltid. När man tonar ned en cell, avmarkeras de andra cellerna med samma nummer i samma rad och kolumn som den cellen, vilket är ett bra sätt att hålla reda på de celler som fortfarande bryter mot regel 1 i Hitori.

-

Ha alltid i beaktande att regel 2 i Hitori innebär att två angränsande celler inte båda kan tonas ned. Hitori kommer markera de cellerna som bryter mot regel 2 med rött. På samma sätt kommer grupper av celler som bryter mot regel 3 genom att de separerar en eller flera icke-nedtonade celler från andra icke-nedtonade celler att markeras i rött.

- -

Om du fastnar på något ställe, välj SpelTips för att Hitori ska flagga en cell som ska tonas ned eller ta bort en nedtoning för att komma närmare en lösning.

- diff -Nru hitori-3.22.4/help/zh_CN/customization.page hitori-3.31.0/help/zh_CN/customization.page --- hitori-3.22.4/help/zh_CN/customization.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/zh_CN/customization.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,14 +0,0 @@ - - - - - - Changing how the game appears and plays. - - 自定义游戏 - -

The game can be customized by changing the board size — boards from 5–10 cells square are allowed.

-

To change the board size, choose an option from GameBoard Size. - Hitori will ask if you want to stop the current game if you're in the middle of one, then start a new game with the - requested board size.

- diff -Nru hitori-3.22.4/help/zh_CN/game.page hitori-3.31.0/help/zh_CN/game.page --- hitori-3.22.4/help/zh_CN/game.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/zh_CN/game.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,26 +0,0 @@ - - - - - - Introduction to the game of Hitori. - - Hitori the Game - -

Hitori is a small logic puzzle in a similar vein to the more popular Sudoku. In the game, the player starts with a square board of numbers, - and has to paint out cells until there are no duplicate numbers in each row and column. The following rules apply:

- -

There must only be one of each number in the unpainted cells in each row and column.

 -

No painted cell may be adjacent to another, vertically or horizontally.

 -

All the unpainted cells must be joined together vertically and horizontally in one group.

 - -

These are the only three rules of the game, and so there may well be multiple solutions to a Hitori puzzle board.

- -
- Main game window - Hitori main window - -

Hitori main window.

- -
- diff -Nru hitori-3.22.4/help/zh_CN/index.page hitori-3.31.0/help/zh_CN/index.page --- hitori-3.22.4/help/zh_CN/index.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/zh_CN/index.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,24 +0,0 @@ - - - - - - Philip Withnall - philip@tecnocode.co.uk - 2008–2010 - - -

This work is licensed under a Creative Commons Attribution-Share - Alike 3.0 Unported License.

- - - Hitori Help - -
- Basic Gameplay & Usage -
- -
- Tips & Tricks -
- diff -Nru hitori-3.22.4/help/zh_CN/legal.xml hitori-3.31.0/help/zh_CN/legal.xml --- hitori-3.22.4/help/zh_CN/legal.xml 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/zh_CN/legal.xml 1970-01-01 00:00:00.000000000 +0000 @@ -1,8 +0,0 @@ - - - -

This work is licensed under a - Creative Commons - Attribution-ShareAlike 3.0 Unported License.

- - diff -Nru hitori-3.22.4/help/zh_CN/playing.page hitori-3.31.0/help/zh_CN/playing.page --- hitori-3.22.4/help/zh_CN/playing.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/zh_CN/playing.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,24 +0,0 @@ - - - - - - Using Hitori to play a game. - - 玩游戏 - -

To start a new game, choose GameNew Game. If you are already playing a - game, Hitori will ask if you want to stop the current game.

-

To paint a cell, click on it; to unpaint it again, click on it again. When cells are painted such that none - of the three rules are broken, the game will end and the board may no longer be manipulated.

-

Hitori also allows you to highlight cells for your own reference when solving a board. This can be achieved by holding - Ctrl or Shift and clicking on a cell. They both highlight cells differently, and cells can be highlighted in - both manners at the same time. Highlighted cells can be de-highlighted by clicking on them again while holding either Ctrl - or Shift again.

-

To undo or redo a move, choose GameUndo or - GameRedo. You may undo or redo as many moves as you like without - restriction.

-

To get a hint on which cells to paint out, choose GameHint. A cell - will be highlighted with a flashing red outline. This shows that the current status of the cell (painted or unpainted) is incorrect, - and should be changed for the game to be won.

- diff -Nru hitori-3.22.4/help/zh_CN/strategy.page hitori-3.31.0/help/zh_CN/strategy.page --- hitori-3.22.4/help/zh_CN/strategy.page 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/help/zh_CN/strategy.page 1970-01-01 00:00:00.000000000 +0000 @@ -1,22 +0,0 @@ - - - - - - Strategies for playing Hitori. - - Gameplay Strategies - -

Hitori is quite similar to Sudoku, in that it takes logical deduction to work out which cells to paint out. One strategy is to use - Shift-clicking to highlight all the repeated numbers in each column, then use Ctrl-clicking to - highlight all the repeated numbers in each row.

-

Once this is done for the entire board, the cells which have been highlighted both ways are good candidates for painting, although not - always. When painting a cell, unhighlighting the other cells with the same number in the same row and column as that cell is a good - way to keep track of which cells are still violating rule 1 of Hitori.

-

Always bear in mind that rule 2 of Hitori means that two adjacent cells can't both be painted. Hitori will highlight in red the - cells which violate rule 2. Similarly, groups of cells which violate rule 3 by separating one or more unpainted cells from the other - unpainted cells will be highlighted in red.

- -

If you get stuck at any point, choose GameHint for Hitori - to flag a cell which should be painted or unpainted to move closer to a solution.

- diff -Nru hitori-3.22.4/hitori.doap hitori-3.31.0/hitori.doap --- hitori-3.22.4/hitori.doap 2017-03-22 14:34:03.000000000 +0000 +++ hitori-3.31.0/hitori.doap 2019-02-19 16:41:30.000000000 +0000 @@ -22,7 +22,7 @@ - + C diff -Nru hitori-3.22.4/INSTALL hitori-3.31.0/INSTALL --- hitori-3.22.4/INSTALL 2017-10-02 08:08:04.000000000 +0000 +++ hitori-3.31.0/INSTALL 1970-01-01 00:00:00.000000000 +0000 @@ -1,370 +0,0 @@ -Installation Instructions -************************* - -Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation, -Inc. - - Copying and distribution of this file, with or without modification, -are permitted in any medium without royalty provided the copyright -notice and this notice are preserved. This file is offered as-is, -without warranty of any kind. - -Basic Installation -================== - - Briefly, the shell command `./configure && make && make install' -should configure, build, and install this package. The following -more-detailed instructions are generic; see the `README' file for -instructions specific to this package. Some packages provide this -`INSTALL' file but do not implement all of the features documented -below. The lack of an optional feature in a given package is not -necessarily a bug. More recommendations for GNU packages can be found -in *note Makefile Conventions: (standards)Makefile Conventions. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. Caching is -disabled by default to prevent problems with accidental use of stale -cache files. - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You need `configure.ac' if -you want to change it or regenerate `configure' using a newer version -of `autoconf'. - - The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. - - Running `configure' might take a while. While running, it prints - some messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package, generally using the just-built uninstalled binaries. - - 4. Type `make install' to install the programs and any data files and - documentation. When installing into a prefix owned by root, it is - recommended that the package be configured and built as a regular - user, and only the `make install' phase executed with root - privileges. - - 5. Optionally, type `make installcheck' to repeat any self-tests, but - this time using the binaries in their final installed location. - This target does not install anything. Running this target as a - regular user, particularly if the prior `make install' required - root privileges, verifies that the installation completed - correctly. - - 6. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - - 7. Often, you can also type `make uninstall' to remove the installed - files again. In practice, not all packages have tested that - uninstallation works correctly, even though it is required by the - GNU Coding Standards. - - 8. Some packages, particularly those that use Automake, provide `make - distcheck', which can by used by developers to test that all other - targets like `make install' and `make uninstall' work correctly. - This target is generally not run by end users. - -Compilers and Options -===================== - - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. Run `./configure --help' -for details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c99 CFLAGS=-g LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - - You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you can use GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. This -is known as a "VPATH" build. - - With a non-GNU `make', it is safer to compile the package for one -architecture at a time in the source code directory. After you have -installed the package for one architecture, use `make distclean' before -reconfiguring for another architecture. - - On MacOS X 10.5 and later systems, you can create libraries and -executables that work on multiple system types--known as "fat" or -"universal" binaries--by specifying multiple `-arch' options to the -compiler but only a single `-arch' option to the preprocessor. Like -this: - - ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ - CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ - CPP="gcc -E" CXXCPP="g++ -E" - - This is not guaranteed to produce working output in all cases, you -may have to build one architecture at a time and combine the results -using the `lipo' tool if you have problems. - -Installation Names -================== - - By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX', where PREFIX must be an -absolute file name. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. In general, the -default for these options is expressed in terms of `${prefix}', so that -specifying just `--prefix' will affect all of the other directory -specifications that were not explicitly provided. - - The most portable way to affect installation locations is to pass the -correct locations to `configure'; however, many packages provide one or -both of the following shortcuts of passing variable assignments to the -`make install' command line to change installation locations without -having to reconfigure or recompile. - - The first method involves providing an override variable for each -affected directory. For example, `make install -prefix=/alternate/directory' will choose an alternate location for all -directory configuration variables that were expressed in terms of -`${prefix}'. Any directories that were specified during `configure', -but not in terms of `${prefix}', must each be overridden at install -time for the entire installation to be relocated. The approach of -makefile variable overrides for each directory variable is required by -the GNU Coding Standards, and ideally causes no recompilation. -However, some platforms have known limitations with the semantics of -shared libraries that end up requiring recompilation when using this -method, particularly noticeable in packages that use GNU Libtool. - - The second method involves providing the `DESTDIR' variable. For -example, `make install DESTDIR=/alternate/directory' will prepend -`/alternate/directory' before all installation names. The approach of -`DESTDIR' overrides is not required by the GNU Coding Standards, and -does not work on platforms that have drive letters. On the other hand, -it does better at avoiding recompilation issues, and works well even -when some directory options were not specified in terms of `${prefix}' -at `configure' time. - -Optional Features -================= - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - - Some packages offer the ability to configure how verbose the -execution of `make' will be. For these packages, running `./configure ---enable-silent-rules' sets the default to minimal output, which can be -overridden with `make V=1'; while running `./configure ---disable-silent-rules' sets the default to verbose, which can be -overridden with `make V=0'. - -Particular systems -================== - - On HP-UX, the default C compiler is not ANSI C compatible. If GNU -CC is not installed, it is recommended to use the following options in -order to use an ANSI C compiler: - - ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" - -and if that doesn't work, install pre-built binaries of GCC for HP-UX. - - HP-UX `make' updates targets which have the same time stamps as -their prerequisites, which makes it generally unusable when shipped -generated files such as `configure' are involved. Use GNU `make' -instead. - - On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot -parse its `' header file. The option `-nodtk' can be used as -a workaround. If GNU CC is not installed, it is therefore recommended -to try - - ./configure CC="cc" - -and if that doesn't work, try - - ./configure CC="cc -nodtk" - - On Solaris, don't put `/usr/ucb' early in your `PATH'. This -directory contains several dysfunctional programs; working variants of -these programs are available in `/usr/bin'. So, if you need `/usr/ucb' -in your `PATH', put it _after_ `/usr/bin'. - - On Haiku, software installed for all users goes in `/boot/common', -not `/usr/local'. It is recommended to use the following options: - - ./configure --prefix=/boot/common - -Specifying the System Type -========================== - - There may be some features `configure' cannot figure out -automatically, but needs to determine by the type of machine the package -will run on. Usually, assuming the package is built to be run on the -_same_ architectures, `configure' can figure that out, but if it prints -a message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS - KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - - Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). - -Unfortunately, this technique does not work for `CONFIG_SHELL' due to -an Autoconf limitation. Until the limitation is lifted, you can use -this workaround: - - CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash - -`configure' Invocation -====================== - - `configure' recognizes the following options to control how it -operates. - -`--help' -`-h' - Print a summary of all of the options to `configure', and exit. - -`--help=short' -`--help=recursive' - Print a summary of the options unique to this package's - `configure', and exit. The `short' variant lists options used - only in the top level, while the `recursive' variant lists options - also present in any nested packages. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`--prefix=DIR' - Use DIR as the installation prefix. *note Installation Names:: - for more details, including other options available for fine-tuning - the installation locations. - -`--no-create' -`-n' - Run the configure checks, but stop before creating any output - files. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. diff -Nru hitori-3.22.4/install-sh hitori-3.31.0/install-sh --- hitori-3.22.4/install-sh 2017-10-02 08:08:04.000000000 +0000 +++ hitori-3.31.0/install-sh 1970-01-01 00:00:00.000000000 +0000 @@ -1,501 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2013-12-25.23; # UTC - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# 'make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -tab=' ' -nl=' -' -IFS=" $tab$nl" - -# Set DOITPROG to "echo" to test this script. - -doit=${DOITPROG-} -doit_exec=${doit:-exec} - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -is_target_a_directory=possibly - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -t) - is_target_a_directory=always - dst_arg=$2 - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - shift;; - - -T) is_target_a_directory=never;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -# We allow the use of options -d and -T together, by making -d -# take the precedence; this is for compatibility with GNU install. - -if test -n "$dir_arg"; then - if test -n "$dst_arg"; then - echo "$0: target directory not allowed when installing a directory." >&2 - exit 1 - fi -fi - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - # Protect names problematic for 'test' and other utilities. - case $dst_arg in - -* | [=\(\)!]) dst_arg=./$dst_arg;; - esac - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call 'install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - if test $# -gt 1 || test "$is_target_a_directory" = always; then - if test ! -d "$dst_arg"; then - echo "$0: $dst_arg: Is not a directory." >&2 - exit 1 - fi - fi -fi - -if test -z "$dir_arg"; then - do_exit='(exit $ret); exit $ret' - trap "ret=129; $do_exit" 1 - trap "ret=130; $do_exit" 2 - trap "ret=141; $do_exit" 13 - trap "ret=143; $do_exit" 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names problematic for 'test' and other utilities. - case $src in - -* | [=\(\)!]) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - dst=$dst_arg - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test "$is_target_a_directory" = never; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - dstdir=`dirname "$dst"` - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - [-=\(\)!]*) prefix='./';; - *) prefix='';; - esac - - oIFS=$IFS - IFS=/ - set -f - set fnord $dstdir - shift - set +f - IFS=$oIFS - - prefixes= - - for d - do - test X"$d" = X && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - set +f && - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru hitori-3.22.4/ltmain.sh hitori-3.31.0/ltmain.sh --- hitori-3.22.4/ltmain.sh 2017-10-02 08:07:50.000000000 +0000 +++ hitori-3.31.0/ltmain.sh 1970-01-01 00:00:00.000000000 +0000 @@ -1,11147 +0,0 @@ -#! /bin/sh -## DO NOT EDIT - This file generated from ./build-aux/ltmain.in -## by inline-source v2014-01-03.01 - -# libtool (GNU libtool) 2.4.6 -# Provide generalized library-building support services. -# Written by Gordon Matzigkeit , 1996 - -# Copyright (C) 1996-2015 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - - -PROGRAM=libtool -PACKAGE=libtool -VERSION=2.4.6 -package_revision=2.4.6 - - -## ------ ## -## Usage. ## -## ------ ## - -# Run './libtool --help' for help with using this script from the -# command line. - - -## ------------------------------- ## -## User overridable command paths. ## -## ------------------------------- ## - -# After configure completes, it has a better idea of some of the -# shell tools we need than the defaults used by the functions shared -# with bootstrap, so set those here where they can still be over- -# ridden by the user, but otherwise take precedence. - -: ${AUTOCONF="autoconf"} -: ${AUTOMAKE="automake"} - - -## -------------------------- ## -## Source external libraries. ## -## -------------------------- ## - -# Much of our low-level functionality needs to be sourced from external -# libraries, which are installed to $pkgauxdir. - -# Set a version string for this script. -scriptversion=2015-01-20.17; # UTC - -# General shell script boiler plate, and helper functions. -# Written by Gary V. Vaughan, 2004 - -# Copyright (C) 2004-2015 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. - -# As a special exception to the GNU General Public License, if you distribute -# this file as part of a program or library that is built using GNU Libtool, -# you may include this file under the same distribution terms that you use -# for the rest of that program. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# Please report bugs or propose patches to gary@gnu.org. - - -## ------ ## -## Usage. ## -## ------ ## - -# Evaluate this file near the top of your script to gain access to -# the functions and variables defined here: -# -# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh -# -# If you need to override any of the default environment variable -# settings, do that before evaluating this file. - - -## -------------------- ## -## Shell normalisation. ## -## -------------------- ## - -# Some shells need a little help to be as Bourne compatible as possible. -# Before doing anything else, make sure all that help has been provided! - -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac -fi - -# NLS nuisances: We save the old values in case they are required later. -_G_user_locale= -_G_safe_locale= -for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -do - eval "if test set = \"\${$_G_var+set}\"; then - save_$_G_var=\$$_G_var - $_G_var=C - export $_G_var - _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\" - _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\" - fi" -done - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Make sure IFS has a sensible default -sp=' ' -nl=' -' -IFS="$sp $nl" - -# There are apparently some retarded systems that use ';' as a PATH separator! -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - - -## ------------------------- ## -## Locate command utilities. ## -## ------------------------- ## - - -# func_executable_p FILE -# ---------------------- -# Check that FILE is an executable regular file. -func_executable_p () -{ - test -f "$1" && test -x "$1" -} - - -# func_path_progs PROGS_LIST CHECK_FUNC [PATH] -# -------------------------------------------- -# Search for either a program that responds to --version with output -# containing "GNU", or else returned by CHECK_FUNC otherwise, by -# trying all the directories in PATH with each of the elements of -# PROGS_LIST. -# -# CHECK_FUNC should accept the path to a candidate program, and -# set $func_check_prog_result if it truncates its output less than -# $_G_path_prog_max characters. -func_path_progs () -{ - _G_progs_list=$1 - _G_check_func=$2 - _G_PATH=${3-"$PATH"} - - _G_path_prog_max=0 - _G_path_prog_found=false - _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:} - for _G_dir in $_G_PATH; do - IFS=$_G_save_IFS - test -z "$_G_dir" && _G_dir=. - for _G_prog_name in $_G_progs_list; do - for _exeext in '' .EXE; do - _G_path_prog=$_G_dir/$_G_prog_name$_exeext - func_executable_p "$_G_path_prog" || continue - case `"$_G_path_prog" --version 2>&1` in - *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;; - *) $_G_check_func $_G_path_prog - func_path_progs_result=$func_check_prog_result - ;; - esac - $_G_path_prog_found && break 3 - done - done - done - IFS=$_G_save_IFS - test -z "$func_path_progs_result" && { - echo "no acceptable sed could be found in \$PATH" >&2 - exit 1 - } -} - - -# We want to be able to use the functions in this file before configure -# has figured out where the best binaries are kept, which means we have -# to search for them ourselves - except when the results are already set -# where we skip the searches. - -# Unless the user overrides by setting SED, search the path for either GNU -# sed, or the sed that truncates its output the least. -test -z "$SED" && { - _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for _G_i in 1 2 3 4 5 6 7; do - _G_sed_script=$_G_sed_script$nl$_G_sed_script - done - echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed - _G_sed_script= - - func_check_prog_sed () - { - _G_path_prog=$1 - - _G_count=0 - printf 0123456789 >conftest.in - while : - do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo '' >> conftest.nl - "$_G_path_prog" -f conftest.sed conftest.out 2>/dev/null || break - diff conftest.out conftest.nl >/dev/null 2>&1 || break - _G_count=`expr $_G_count + 1` - if test "$_G_count" -gt "$_G_path_prog_max"; then - # Best one so far, save it but keep looking for a better one - func_check_prog_result=$_G_path_prog - _G_path_prog_max=$_G_count - fi - # 10*(2^10) chars as input seems more than enough - test 10 -lt "$_G_count" && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out - } - - func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin - rm -f conftest.sed - SED=$func_path_progs_result -} - - -# Unless the user overrides by setting GREP, search the path for either GNU -# grep, or the grep that truncates its output the least. -test -z "$GREP" && { - func_check_prog_grep () - { - _G_path_prog=$1 - - _G_count=0 - _G_path_prog_max=0 - printf 0123456789 >conftest.in - while : - do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo 'GREP' >> conftest.nl - "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' conftest.out 2>/dev/null || break - diff conftest.out conftest.nl >/dev/null 2>&1 || break - _G_count=`expr $_G_count + 1` - if test "$_G_count" -gt "$_G_path_prog_max"; then - # Best one so far, save it but keep looking for a better one - func_check_prog_result=$_G_path_prog - _G_path_prog_max=$_G_count - fi - # 10*(2^10) chars as input seems more than enough - test 10 -lt "$_G_count" && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out - } - - func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin - GREP=$func_path_progs_result -} - - -## ------------------------------- ## -## User overridable command paths. ## -## ------------------------------- ## - -# All uppercase variable names are used for environment variables. These -# variables can be overridden by the user before calling a script that -# uses them if a suitable command of that name is not already available -# in the command search PATH. - -: ${CP="cp -f"} -: ${ECHO="printf %s\n"} -: ${EGREP="$GREP -E"} -: ${FGREP="$GREP -F"} -: ${LN_S="ln -s"} -: ${MAKE="make"} -: ${MKDIR="mkdir"} -: ${MV="mv -f"} -: ${RM="rm -f"} -: ${SHELL="${CONFIG_SHELL-/bin/sh}"} - - -## -------------------- ## -## Useful sed snippets. ## -## -------------------- ## - -sed_dirname='s|/[^/]*$||' -sed_basename='s|^.*/||' - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -sed_quote_subst='s|\([`"$\\]\)|\\\1|g' - -# Same as above, but do not quote variable references. -sed_double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution that turns a string into a regex matching for the -# string literally. -sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g' - -# Sed substitution that converts a w32 file name or path -# that contains forward slashes, into one that contains -# (escaped) backslashes. A very naive implementation. -sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - -# Re-'\' parameter expansions in output of sed_double_quote_subst that -# were '\'-ed in input to the same. If an odd number of '\' preceded a -# '$' in input to sed_double_quote_subst, that '$' was protected from -# expansion. Since each input '\' is now two '\'s, look for any number -# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'. -_G_bs='\\' -_G_bs2='\\\\' -_G_bs4='\\\\\\\\' -_G_dollar='\$' -sed_double_backslash="\ - s/$_G_bs4/&\\ -/g - s/^$_G_bs2$_G_dollar/$_G_bs&/ - s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g - s/\n//g" - - -## ----------------- ## -## Global variables. ## -## ----------------- ## - -# Except for the global variables explicitly listed below, the following -# functions in the '^func_' namespace, and the '^require_' namespace -# variables initialised in the 'Resource management' section, sourcing -# this file will not pollute your global namespace with anything -# else. There's no portable way to scope variables in Bourne shell -# though, so actually running these functions will sometimes place -# results into a variable named after the function, and often use -# temporary variables in the '^_G_' namespace. If you are careful to -# avoid using those namespaces casually in your sourcing script, things -# should continue to work as you expect. And, of course, you can freely -# overwrite any of the functions or variables defined here before -# calling anything to customize them. - -EXIT_SUCCESS=0 -EXIT_FAILURE=1 -EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - -# Allow overriding, eg assuming that you follow the convention of -# putting '$debug_cmd' at the start of all your functions, you can get -# bash to show function call trace with: -# -# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name -debug_cmd=${debug_cmd-":"} -exit_cmd=: - -# By convention, finish your script with: -# -# exit $exit_status -# -# so that you can set exit_status to non-zero if you want to indicate -# something went wrong during execution without actually bailing out at -# the point of failure. -exit_status=$EXIT_SUCCESS - -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath=$0 - -# The name of this program. -progname=`$ECHO "$progpath" |$SED "$sed_basename"` - -# Make sure we have an absolute progpath for reexecution: -case $progpath in - [\\/]*|[A-Za-z]:\\*) ;; - *[\\/]*) - progdir=`$ECHO "$progpath" |$SED "$sed_dirname"` - progdir=`cd "$progdir" && pwd` - progpath=$progdir/$progname - ;; - *) - _G_IFS=$IFS - IFS=${PATH_SEPARATOR-:} - for progdir in $PATH; do - IFS=$_G_IFS - test -x "$progdir/$progname" && break - done - IFS=$_G_IFS - test -n "$progdir" || progdir=`pwd` - progpath=$progdir/$progname - ;; -esac - - -## ----------------- ## -## Standard options. ## -## ----------------- ## - -# The following options affect the operation of the functions defined -# below, and should be set appropriately depending on run-time para- -# meters passed on the command line. - -opt_dry_run=false -opt_quiet=false -opt_verbose=false - -# Categories 'all' and 'none' are always available. Append any others -# you will pass as the first argument to func_warning from your own -# code. -warning_categories= - -# By default, display warnings according to 'opt_warning_types'. Set -# 'warning_func' to ':' to elide all warnings, or func_fatal_error to -# treat the next displayed warning as a fatal error. -warning_func=func_warn_and_continue - -# Set to 'all' to display all warnings, 'none' to suppress all -# warnings, or a space delimited list of some subset of -# 'warning_categories' to display only the listed warnings. -opt_warning_types=all - - -## -------------------- ## -## Resource management. ## -## -------------------- ## - -# This section contains definitions for functions that each ensure a -# particular resource (a file, or a non-empty configuration variable for -# example) is available, and if appropriate to extract default values -# from pertinent package files. Call them using their associated -# 'require_*' variable to ensure that they are executed, at most, once. -# -# It's entirely deliberate that calling these functions can set -# variables that don't obey the namespace limitations obeyed by the rest -# of this file, in order that that they be as useful as possible to -# callers. - - -# require_term_colors -# ------------------- -# Allow display of bold text on terminals that support it. -require_term_colors=func_require_term_colors -func_require_term_colors () -{ - $debug_cmd - - test -t 1 && { - # COLORTERM and USE_ANSI_COLORS environment variables take - # precedence, because most terminfo databases neglect to describe - # whether color sequences are supported. - test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"} - - if test 1 = "$USE_ANSI_COLORS"; then - # Standard ANSI escape sequences - tc_reset='' - tc_bold=''; tc_standout='' - tc_red=''; tc_green='' - tc_blue=''; tc_cyan='' - else - # Otherwise trust the terminfo database after all. - test -n "`tput sgr0 2>/dev/null`" && { - tc_reset=`tput sgr0` - test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold` - tc_standout=$tc_bold - test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso` - test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1` - test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2` - test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4` - test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5` - } - fi - } - - require_term_colors=: -} - - -## ----------------- ## -## Function library. ## -## ----------------- ## - -# This section contains a variety of useful functions to call in your -# scripts. Take note of the portable wrappers for features provided by -# some modern shells, which will fall back to slower equivalents on -# less featureful shells. - - -# func_append VAR VALUE -# --------------------- -# Append VALUE onto the existing contents of VAR. - - # We should try to minimise forks, especially on Windows where they are - # unreasonably slow, so skip the feature probes when bash or zsh are - # being used: - if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then - : ${_G_HAVE_ARITH_OP="yes"} - : ${_G_HAVE_XSI_OPS="yes"} - # The += operator was introduced in bash 3.1 - case $BASH_VERSION in - [12].* | 3.0 | 3.0*) ;; - *) - : ${_G_HAVE_PLUSEQ_OP="yes"} - ;; - esac - fi - - # _G_HAVE_PLUSEQ_OP - # Can be empty, in which case the shell is probed, "yes" if += is - # useable or anything else if it does not work. - test -z "$_G_HAVE_PLUSEQ_OP" \ - && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \ - && _G_HAVE_PLUSEQ_OP=yes - -if test yes = "$_G_HAVE_PLUSEQ_OP" -then - # This is an XSI compatible shell, allowing a faster implementation... - eval 'func_append () - { - $debug_cmd - - eval "$1+=\$2" - }' -else - # ...otherwise fall back to using expr, which is often a shell builtin. - func_append () - { - $debug_cmd - - eval "$1=\$$1\$2" - } -fi - - -# func_append_quoted VAR VALUE -# ---------------------------- -# Quote VALUE and append to the end of shell variable VAR, separated -# by a space. -if test yes = "$_G_HAVE_PLUSEQ_OP"; then - eval 'func_append_quoted () - { - $debug_cmd - - func_quote_for_eval "$2" - eval "$1+=\\ \$func_quote_for_eval_result" - }' -else - func_append_quoted () - { - $debug_cmd - - func_quote_for_eval "$2" - eval "$1=\$$1\\ \$func_quote_for_eval_result" - } -fi - - -# func_append_uniq VAR VALUE -# -------------------------- -# Append unique VALUE onto the existing contents of VAR, assuming -# entries are delimited by the first character of VALUE. For example: -# -# func_append_uniq options " --another-option option-argument" -# -# will only append to $options if " --another-option option-argument " -# is not already present somewhere in $options already (note spaces at -# each end implied by leading space in second argument). -func_append_uniq () -{ - $debug_cmd - - eval _G_current_value='`$ECHO $'$1'`' - _G_delim=`expr "$2" : '\(.\)'` - - case $_G_delim$_G_current_value$_G_delim in - *"$2$_G_delim"*) ;; - *) func_append "$@" ;; - esac -} - - -# func_arith TERM... -# ------------------ -# Set func_arith_result to the result of evaluating TERMs. - test -z "$_G_HAVE_ARITH_OP" \ - && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \ - && _G_HAVE_ARITH_OP=yes - -if test yes = "$_G_HAVE_ARITH_OP"; then - eval 'func_arith () - { - $debug_cmd - - func_arith_result=$(( $* )) - }' -else - func_arith () - { - $debug_cmd - - func_arith_result=`expr "$@"` - } -fi - - -# func_basename FILE -# ------------------ -# Set func_basename_result to FILE with everything up to and including -# the last / stripped. -if test yes = "$_G_HAVE_XSI_OPS"; then - # If this shell supports suffix pattern removal, then use it to avoid - # forking. Hide the definitions single quotes in case the shell chokes - # on unsupported syntax... - _b='func_basename_result=${1##*/}' - _d='case $1 in - */*) func_dirname_result=${1%/*}$2 ;; - * ) func_dirname_result=$3 ;; - esac' - -else - # ...otherwise fall back to using sed. - _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`' - _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"` - if test "X$func_dirname_result" = "X$1"; then - func_dirname_result=$3 - else - func_append func_dirname_result "$2" - fi' -fi - -eval 'func_basename () -{ - $debug_cmd - - '"$_b"' -}' - - -# func_dirname FILE APPEND NONDIR_REPLACEMENT -# ------------------------------------------- -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -eval 'func_dirname () -{ - $debug_cmd - - '"$_d"' -}' - - -# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT -# -------------------------------------------------------- -# Perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# For efficiency, we do not delegate to the functions above but instead -# duplicate the functionality here. -eval 'func_dirname_and_basename () -{ - $debug_cmd - - '"$_b"' - '"$_d"' -}' - - -# func_echo ARG... -# ---------------- -# Echo program name prefixed message. -func_echo () -{ - $debug_cmd - - _G_message=$* - - func_echo_IFS=$IFS - IFS=$nl - for _G_line in $_G_message; do - IFS=$func_echo_IFS - $ECHO "$progname: $_G_line" - done - IFS=$func_echo_IFS -} - - -# func_echo_all ARG... -# -------------------- -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} - - -# func_echo_infix_1 INFIX ARG... -# ------------------------------ -# Echo program name, followed by INFIX on the first line, with any -# additional lines not showing INFIX. -func_echo_infix_1 () -{ - $debug_cmd - - $require_term_colors - - _G_infix=$1; shift - _G_indent=$_G_infix - _G_prefix="$progname: $_G_infix: " - _G_message=$* - - # Strip color escape sequences before counting printable length - for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan" - do - test -n "$_G_tc" && { - _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"` - _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"` - } - done - _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes - - func_echo_infix_1_IFS=$IFS - IFS=$nl - for _G_line in $_G_message; do - IFS=$func_echo_infix_1_IFS - $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2 - _G_prefix=$_G_indent - done - IFS=$func_echo_infix_1_IFS -} - - -# func_error ARG... -# ----------------- -# Echo program name prefixed message to standard error. -func_error () -{ - $debug_cmd - - $require_term_colors - - func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2 -} - - -# func_fatal_error ARG... -# ----------------------- -# Echo program name prefixed message to standard error, and exit. -func_fatal_error () -{ - $debug_cmd - - func_error "$*" - exit $EXIT_FAILURE -} - - -# func_grep EXPRESSION FILENAME -# ----------------------------- -# Check whether EXPRESSION matches any line of FILENAME, without output. -func_grep () -{ - $debug_cmd - - $GREP "$1" "$2" >/dev/null 2>&1 -} - - -# func_len STRING -# --------------- -# Set func_len_result to the length of STRING. STRING may not -# start with a hyphen. - test -z "$_G_HAVE_XSI_OPS" \ - && (eval 'x=a/b/c; - test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ - && _G_HAVE_XSI_OPS=yes - -if test yes = "$_G_HAVE_XSI_OPS"; then - eval 'func_len () - { - $debug_cmd - - func_len_result=${#1} - }' -else - func_len () - { - $debug_cmd - - func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` - } -fi - - -# func_mkdir_p DIRECTORY-PATH -# --------------------------- -# Make sure the entire path to DIRECTORY-PATH is available. -func_mkdir_p () -{ - $debug_cmd - - _G_directory_path=$1 - _G_dir_list= - - if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then - - # Protect directory names starting with '-' - case $_G_directory_path in - -*) _G_directory_path=./$_G_directory_path ;; - esac - - # While some portion of DIR does not yet exist... - while test ! -d "$_G_directory_path"; do - # ...make a list in topmost first order. Use a colon delimited - # list incase some portion of path contains whitespace. - _G_dir_list=$_G_directory_path:$_G_dir_list - - # If the last portion added has no slash in it, the list is done - case $_G_directory_path in */*) ;; *) break ;; esac - - # ...otherwise throw away the child directory and loop - _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"` - done - _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'` - - func_mkdir_p_IFS=$IFS; IFS=: - for _G_dir in $_G_dir_list; do - IFS=$func_mkdir_p_IFS - # mkdir can fail with a 'File exist' error if two processes - # try to create one of the directories concurrently. Don't - # stop in that case! - $MKDIR "$_G_dir" 2>/dev/null || : - done - IFS=$func_mkdir_p_IFS - - # Bail out if we (or some other process) failed to create a directory. - test -d "$_G_directory_path" || \ - func_fatal_error "Failed to create '$1'" - fi -} - - -# func_mktempdir [BASENAME] -# ------------------------- -# Make a temporary directory that won't clash with other running -# libtool processes, and avoids race conditions if possible. If -# given, BASENAME is the basename for that directory. -func_mktempdir () -{ - $debug_cmd - - _G_template=${TMPDIR-/tmp}/${1-$progname} - - if test : = "$opt_dry_run"; then - # Return a directory name, but don't create it in dry-run mode - _G_tmpdir=$_G_template-$$ - else - - # If mktemp works, use that first and foremost - _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null` - - if test ! -d "$_G_tmpdir"; then - # Failing that, at least try and use $RANDOM to avoid a race - _G_tmpdir=$_G_template-${RANDOM-0}$$ - - func_mktempdir_umask=`umask` - umask 0077 - $MKDIR "$_G_tmpdir" - umask $func_mktempdir_umask - fi - - # If we're not in dry-run mode, bomb out on failure - test -d "$_G_tmpdir" || \ - func_fatal_error "cannot create temporary directory '$_G_tmpdir'" - fi - - $ECHO "$_G_tmpdir" -} - - -# func_normal_abspath PATH -# ------------------------ -# Remove doubled-up and trailing slashes, "." path components, -# and cancel out any ".." path components in PATH after making -# it an absolute path. -func_normal_abspath () -{ - $debug_cmd - - # These SED scripts presuppose an absolute path with a trailing slash. - _G_pathcar='s|^/\([^/]*\).*$|\1|' - _G_pathcdr='s|^/[^/]*||' - _G_removedotparts=':dotsl - s|/\./|/|g - t dotsl - s|/\.$|/|' - _G_collapseslashes='s|/\{1,\}|/|g' - _G_finalslash='s|/*$|/|' - - # Start from root dir and reassemble the path. - func_normal_abspath_result= - func_normal_abspath_tpath=$1 - func_normal_abspath_altnamespace= - case $func_normal_abspath_tpath in - "") - # Empty path, that just means $cwd. - func_stripname '' '/' "`pwd`" - func_normal_abspath_result=$func_stripname_result - return - ;; - # The next three entries are used to spot a run of precisely - # two leading slashes without using negated character classes; - # we take advantage of case's first-match behaviour. - ///*) - # Unusual form of absolute path, do nothing. - ;; - //*) - # Not necessarily an ordinary path; POSIX reserves leading '//' - # and for example Cygwin uses it to access remote file shares - # over CIFS/SMB, so we conserve a leading double slash if found. - func_normal_abspath_altnamespace=/ - ;; - /*) - # Absolute path, do nothing. - ;; - *) - # Relative path, prepend $cwd. - func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath - ;; - esac - - # Cancel out all the simple stuff to save iterations. We also want - # the path to end with a slash for ease of parsing, so make sure - # there is one (and only one) here. - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"` - while :; do - # Processed it all yet? - if test / = "$func_normal_abspath_tpath"; then - # If we ascended to the root using ".." the result may be empty now. - if test -z "$func_normal_abspath_result"; then - func_normal_abspath_result=/ - fi - break - fi - func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$_G_pathcar"` - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$_G_pathcdr"` - # Figure out what to do with it - case $func_normal_abspath_tcomponent in - "") - # Trailing empty path component, ignore it. - ;; - ..) - # Parent dir; strip last assembled component from result. - func_dirname "$func_normal_abspath_result" - func_normal_abspath_result=$func_dirname_result - ;; - *) - # Actual path component, append it. - func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent" - ;; - esac - done - # Restore leading double-slash if one was found on entry. - func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result -} - - -# func_notquiet ARG... -# -------------------- -# Echo program name prefixed message only when not in quiet mode. -func_notquiet () -{ - $debug_cmd - - $opt_quiet || func_echo ${1+"$@"} - - # A bug in bash halts the script if the last line of a function - # fails when set -e is in force, so we need another command to - # work around that: - : -} - - -# func_relative_path SRCDIR DSTDIR -# -------------------------------- -# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR. -func_relative_path () -{ - $debug_cmd - - func_relative_path_result= - func_normal_abspath "$1" - func_relative_path_tlibdir=$func_normal_abspath_result - func_normal_abspath "$2" - func_relative_path_tbindir=$func_normal_abspath_result - - # Ascend the tree starting from libdir - while :; do - # check if we have found a prefix of bindir - case $func_relative_path_tbindir in - $func_relative_path_tlibdir) - # found an exact match - func_relative_path_tcancelled= - break - ;; - $func_relative_path_tlibdir*) - # found a matching prefix - func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" - func_relative_path_tcancelled=$func_stripname_result - if test -z "$func_relative_path_result"; then - func_relative_path_result=. - fi - break - ;; - *) - func_dirname $func_relative_path_tlibdir - func_relative_path_tlibdir=$func_dirname_result - if test -z "$func_relative_path_tlibdir"; then - # Have to descend all the way to the root! - func_relative_path_result=../$func_relative_path_result - func_relative_path_tcancelled=$func_relative_path_tbindir - break - fi - func_relative_path_result=../$func_relative_path_result - ;; - esac - done - - # Now calculate path; take care to avoid doubling-up slashes. - func_stripname '' '/' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - func_stripname '/' '/' "$func_relative_path_tcancelled" - if test -n "$func_stripname_result"; then - func_append func_relative_path_result "/$func_stripname_result" - fi - - # Normalisation. If bindir is libdir, return '.' else relative path. - if test -n "$func_relative_path_result"; then - func_stripname './' '' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - fi - - test -n "$func_relative_path_result" || func_relative_path_result=. - - : -} - - -# func_quote_for_eval ARG... -# -------------------------- -# Aesthetically quote ARGs to be evaled later. -# This function returns two values: -# i) func_quote_for_eval_result -# double-quoted, suitable for a subsequent eval -# ii) func_quote_for_eval_unquoted_result -# has all characters that are still active within double -# quotes backslashified. -func_quote_for_eval () -{ - $debug_cmd - - func_quote_for_eval_unquoted_result= - func_quote_for_eval_result= - while test 0 -lt $#; do - case $1 in - *[\\\`\"\$]*) - _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; - *) - _G_unquoted_arg=$1 ;; - esac - if test -n "$func_quote_for_eval_unquoted_result"; then - func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" - else - func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg" - fi - - case $_G_unquoted_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and variable expansion - # for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - _G_quoted_arg=\"$_G_unquoted_arg\" - ;; - *) - _G_quoted_arg=$_G_unquoted_arg - ;; - esac - - if test -n "$func_quote_for_eval_result"; then - func_append func_quote_for_eval_result " $_G_quoted_arg" - else - func_append func_quote_for_eval_result "$_G_quoted_arg" - fi - shift - done -} - - -# func_quote_for_expand ARG -# ------------------------- -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () -{ - $debug_cmd - - case $1 in - *[\\\`\"]*) - _G_arg=`$ECHO "$1" | $SED \ - -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;; - *) - _G_arg=$1 ;; - esac - - case $_G_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - _G_arg=\"$_G_arg\" - ;; - esac - - func_quote_for_expand_result=$_G_arg -} - - -# func_stripname PREFIX SUFFIX NAME -# --------------------------------- -# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -if test yes = "$_G_HAVE_XSI_OPS"; then - eval 'func_stripname () - { - $debug_cmd - - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary variable first. - func_stripname_result=$3 - func_stripname_result=${func_stripname_result#"$1"} - func_stripname_result=${func_stripname_result%"$2"} - }' -else - func_stripname () - { - $debug_cmd - - case $2 in - .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;; - *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;; - esac - } -fi - - -# func_show_eval CMD [FAIL_EXP] -# ----------------------------- -# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. -func_show_eval () -{ - $debug_cmd - - _G_cmd=$1 - _G_fail_exp=${2-':'} - - func_quote_for_expand "$_G_cmd" - eval "func_notquiet $func_quote_for_expand_result" - - $opt_dry_run || { - eval "$_G_cmd" - _G_status=$? - if test 0 -ne "$_G_status"; then - eval "(exit $_G_status); $_G_fail_exp" - fi - } -} - - -# func_show_eval_locale CMD [FAIL_EXP] -# ------------------------------------ -# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. Use the saved locale for evaluation. -func_show_eval_locale () -{ - $debug_cmd - - _G_cmd=$1 - _G_fail_exp=${2-':'} - - $opt_quiet || { - func_quote_for_expand "$_G_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - $opt_dry_run || { - eval "$_G_user_locale - $_G_cmd" - _G_status=$? - eval "$_G_safe_locale" - if test 0 -ne "$_G_status"; then - eval "(exit $_G_status); $_G_fail_exp" - fi - } -} - - -# func_tr_sh -# ---------- -# Turn $1 into a string suitable for a shell variable name. -# Result is stored in $func_tr_sh_result. All characters -# not in the set a-zA-Z0-9_ are replaced with '_'. Further, -# if $1 begins with a digit, a '_' is prepended as well. -func_tr_sh () -{ - $debug_cmd - - case $1 in - [0-9]* | *[!a-zA-Z0-9_]*) - func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'` - ;; - * ) - func_tr_sh_result=$1 - ;; - esac -} - - -# func_verbose ARG... -# ------------------- -# Echo program name prefixed message in verbose mode only. -func_verbose () -{ - $debug_cmd - - $opt_verbose && func_echo "$*" - - : -} - - -# func_warn_and_continue ARG... -# ----------------------------- -# Echo program name prefixed warning message to standard error. -func_warn_and_continue () -{ - $debug_cmd - - $require_term_colors - - func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2 -} - - -# func_warning CATEGORY ARG... -# ---------------------------- -# Echo program name prefixed warning message to standard error. Warning -# messages can be filtered according to CATEGORY, where this function -# elides messages where CATEGORY is not listed in the global variable -# 'opt_warning_types'. -func_warning () -{ - $debug_cmd - - # CATEGORY must be in the warning_categories list! - case " $warning_categories " in - *" $1 "*) ;; - *) func_internal_error "invalid warning category '$1'" ;; - esac - - _G_category=$1 - shift - - case " $opt_warning_types " in - *" $_G_category "*) $warning_func ${1+"$@"} ;; - esac -} - - -# func_sort_ver VER1 VER2 -# ----------------------- -# 'sort -V' is not generally available. -# Note this deviates from the version comparison in automake -# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a -# but this should suffice as we won't be specifying old -# version formats or redundant trailing .0 in bootstrap.conf. -# If we did want full compatibility then we should probably -# use m4_version_compare from autoconf. -func_sort_ver () -{ - $debug_cmd - - printf '%s\n%s\n' "$1" "$2" \ - | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n -} - -# func_lt_ver PREV CURR -# --------------------- -# Return true if PREV and CURR are in the correct order according to -# func_sort_ver, otherwise false. Use it like this: -# -# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..." -func_lt_ver () -{ - $debug_cmd - - test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q` -} - - -# Local variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" -# time-stamp-time-zone: "UTC" -# End: -#! /bin/sh - -# Set a version string for this script. -scriptversion=2014-01-07.03; # UTC - -# A portable, pluggable option parser for Bourne shell. -# Written by Gary V. Vaughan, 2010 - -# Copyright (C) 2010-2015 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# Please report bugs or propose patches to gary@gnu.org. - - -## ------ ## -## Usage. ## -## ------ ## - -# This file is a library for parsing options in your shell scripts along -# with assorted other useful supporting features that you can make use -# of too. -# -# For the simplest scripts you might need only: -# -# #!/bin/sh -# . relative/path/to/funclib.sh -# . relative/path/to/options-parser -# scriptversion=1.0 -# func_options ${1+"$@"} -# eval set dummy "$func_options_result"; shift -# ...rest of your script... -# -# In order for the '--version' option to work, you will need to have a -# suitably formatted comment like the one at the top of this file -# starting with '# Written by ' and ending with '# warranty; '. -# -# For '-h' and '--help' to work, you will also need a one line -# description of your script's purpose in a comment directly above the -# '# Written by ' line, like the one at the top of this file. -# -# The default options also support '--debug', which will turn on shell -# execution tracing (see the comment above debug_cmd below for another -# use), and '--verbose' and the func_verbose function to allow your script -# to display verbose messages only when your user has specified -# '--verbose'. -# -# After sourcing this file, you can plug processing for additional -# options by amending the variables from the 'Configuration' section -# below, and following the instructions in the 'Option parsing' -# section further down. - -## -------------- ## -## Configuration. ## -## -------------- ## - -# You should override these variables in your script after sourcing this -# file so that they reflect the customisations you have added to the -# option parser. - -# The usage line for option parsing errors and the start of '-h' and -# '--help' output messages. You can embed shell variables for delayed -# expansion at the time the message is displayed, but you will need to -# quote other shell meta-characters carefully to prevent them being -# expanded when the contents are evaled. -usage='$progpath [OPTION]...' - -# Short help message in response to '-h' and '--help'. Add to this or -# override it after sourcing this library to reflect the full set of -# options your script accepts. -usage_message="\ - --debug enable verbose shell tracing - -W, --warnings=CATEGORY - report the warnings falling in CATEGORY [all] - -v, --verbose verbosely report processing - --version print version information and exit - -h, --help print short or long help message and exit -" - -# Additional text appended to 'usage_message' in response to '--help'. -long_help_message=" -Warning categories include: - 'all' show all warnings - 'none' turn off all the warnings - 'error' warnings are treated as fatal errors" - -# Help message printed before fatal option parsing errors. -fatal_help="Try '\$progname --help' for more information." - - - -## ------------------------- ## -## Hook function management. ## -## ------------------------- ## - -# This section contains functions for adding, removing, and running hooks -# to the main code. A hook is just a named list of of function, that can -# be run in order later on. - -# func_hookable FUNC_NAME -# ----------------------- -# Declare that FUNC_NAME will run hooks added with -# 'func_add_hook FUNC_NAME ...'. -func_hookable () -{ - $debug_cmd - - func_append hookable_fns " $1" -} - - -# func_add_hook FUNC_NAME HOOK_FUNC -# --------------------------------- -# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must -# first have been declared "hookable" by a call to 'func_hookable'. -func_add_hook () -{ - $debug_cmd - - case " $hookable_fns " in - *" $1 "*) ;; - *) func_fatal_error "'$1' does not accept hook functions." ;; - esac - - eval func_append ${1}_hooks '" $2"' -} - - -# func_remove_hook FUNC_NAME HOOK_FUNC -# ------------------------------------ -# Remove HOOK_FUNC from the list of functions called by FUNC_NAME. -func_remove_hook () -{ - $debug_cmd - - eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`' -} - - -# func_run_hooks FUNC_NAME [ARG]... -# --------------------------------- -# Run all hook functions registered to FUNC_NAME. -# It is assumed that the list of hook functions contains nothing more -# than a whitespace-delimited list of legal shell function names, and -# no effort is wasted trying to catch shell meta-characters or preserve -# whitespace. -func_run_hooks () -{ - $debug_cmd - - case " $hookable_fns " in - *" $1 "*) ;; - *) func_fatal_error "'$1' does not support hook funcions.n" ;; - esac - - eval _G_hook_fns=\$$1_hooks; shift - - for _G_hook in $_G_hook_fns; do - eval $_G_hook '"$@"' - - # store returned options list back into positional - # parameters for next 'cmd' execution. - eval _G_hook_result=\$${_G_hook}_result - eval set dummy "$_G_hook_result"; shift - done - - func_quote_for_eval ${1+"$@"} - func_run_hooks_result=$func_quote_for_eval_result -} - - - -## --------------- ## -## Option parsing. ## -## --------------- ## - -# In order to add your own option parsing hooks, you must accept the -# full positional parameter list in your hook function, remove any -# options that you action, and then pass back the remaining unprocessed -# options in '_result', escaped suitably for -# 'eval'. Like this: -# -# my_options_prep () -# { -# $debug_cmd -# -# # Extend the existing usage message. -# usage_message=$usage_message' -# -s, --silent don'\''t print informational messages -# ' -# -# func_quote_for_eval ${1+"$@"} -# my_options_prep_result=$func_quote_for_eval_result -# } -# func_add_hook func_options_prep my_options_prep -# -# -# my_silent_option () -# { -# $debug_cmd -# -# # Note that for efficiency, we parse as many options as we can -# # recognise in a loop before passing the remainder back to the -# # caller on the first unrecognised argument we encounter. -# while test $# -gt 0; do -# opt=$1; shift -# case $opt in -# --silent|-s) opt_silent=: ;; -# # Separate non-argument short options: -# -s*) func_split_short_opt "$_G_opt" -# set dummy "$func_split_short_opt_name" \ -# "-$func_split_short_opt_arg" ${1+"$@"} -# shift -# ;; -# *) set dummy "$_G_opt" "$*"; shift; break ;; -# esac -# done -# -# func_quote_for_eval ${1+"$@"} -# my_silent_option_result=$func_quote_for_eval_result -# } -# func_add_hook func_parse_options my_silent_option -# -# -# my_option_validation () -# { -# $debug_cmd -# -# $opt_silent && $opt_verbose && func_fatal_help "\ -# '--silent' and '--verbose' options are mutually exclusive." -# -# func_quote_for_eval ${1+"$@"} -# my_option_validation_result=$func_quote_for_eval_result -# } -# func_add_hook func_validate_options my_option_validation -# -# You'll alse need to manually amend $usage_message to reflect the extra -# options you parse. It's preferable to append if you can, so that -# multiple option parsing hooks can be added safely. - - -# func_options [ARG]... -# --------------------- -# All the functions called inside func_options are hookable. See the -# individual implementations for details. -func_hookable func_options -func_options () -{ - $debug_cmd - - func_options_prep ${1+"$@"} - eval func_parse_options \ - ${func_options_prep_result+"$func_options_prep_result"} - eval func_validate_options \ - ${func_parse_options_result+"$func_parse_options_result"} - - eval func_run_hooks func_options \ - ${func_validate_options_result+"$func_validate_options_result"} - - # save modified positional parameters for caller - func_options_result=$func_run_hooks_result -} - - -# func_options_prep [ARG]... -# -------------------------- -# All initialisations required before starting the option parse loop. -# Note that when calling hook functions, we pass through the list of -# positional parameters. If a hook function modifies that list, and -# needs to propogate that back to rest of this script, then the complete -# modified list must be put in 'func_run_hooks_result' before -# returning. -func_hookable func_options_prep -func_options_prep () -{ - $debug_cmd - - # Option defaults: - opt_verbose=false - opt_warning_types= - - func_run_hooks func_options_prep ${1+"$@"} - - # save modified positional parameters for caller - func_options_prep_result=$func_run_hooks_result -} - - -# func_parse_options [ARG]... -# --------------------------- -# The main option parsing loop. -func_hookable func_parse_options -func_parse_options () -{ - $debug_cmd - - func_parse_options_result= - - # this just eases exit handling - while test $# -gt 0; do - # Defer to hook functions for initial option parsing, so they - # get priority in the event of reusing an option name. - func_run_hooks func_parse_options ${1+"$@"} - - # Adjust func_parse_options positional parameters to match - eval set dummy "$func_run_hooks_result"; shift - - # Break out of the loop if we already parsed every option. - test $# -gt 0 || break - - _G_opt=$1 - shift - case $_G_opt in - --debug|-x) debug_cmd='set -x' - func_echo "enabling shell trace mode" - $debug_cmd - ;; - - --no-warnings|--no-warning|--no-warn) - set dummy --warnings none ${1+"$@"} - shift - ;; - - --warnings|--warning|-W) - test $# = 0 && func_missing_arg $_G_opt && break - case " $warning_categories $1" in - *" $1 "*) - # trailing space prevents matching last $1 above - func_append_uniq opt_warning_types " $1" - ;; - *all) - opt_warning_types=$warning_categories - ;; - *none) - opt_warning_types=none - warning_func=: - ;; - *error) - opt_warning_types=$warning_categories - warning_func=func_fatal_error - ;; - *) - func_fatal_error \ - "unsupported warning category: '$1'" - ;; - esac - shift - ;; - - --verbose|-v) opt_verbose=: ;; - --version) func_version ;; - -\?|-h) func_usage ;; - --help) func_help ;; - - # Separate optargs to long options (plugins may need this): - --*=*) func_split_equals "$_G_opt" - set dummy "$func_split_equals_lhs" \ - "$func_split_equals_rhs" ${1+"$@"} - shift - ;; - - # Separate optargs to short options: - -W*) - func_split_short_opt "$_G_opt" - set dummy "$func_split_short_opt_name" \ - "$func_split_short_opt_arg" ${1+"$@"} - shift - ;; - - # Separate non-argument short options: - -\?*|-h*|-v*|-x*) - func_split_short_opt "$_G_opt" - set dummy "$func_split_short_opt_name" \ - "-$func_split_short_opt_arg" ${1+"$@"} - shift - ;; - - --) break ;; - -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; - *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; - esac - done - - # save modified positional parameters for caller - func_quote_for_eval ${1+"$@"} - func_parse_options_result=$func_quote_for_eval_result -} - - -# func_validate_options [ARG]... -# ------------------------------ -# Perform any sanity checks on option settings and/or unconsumed -# arguments. -func_hookable func_validate_options -func_validate_options () -{ - $debug_cmd - - # Display all warnings if -W was not given. - test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" - - func_run_hooks func_validate_options ${1+"$@"} - - # Bail if the options were screwed! - $exit_cmd $EXIT_FAILURE - - # save modified positional parameters for caller - func_validate_options_result=$func_run_hooks_result -} - - - -## ----------------- ## -## Helper functions. ## -## ----------------- ## - -# This section contains the helper functions used by the rest of the -# hookable option parser framework in ascii-betical order. - - -# func_fatal_help ARG... -# ---------------------- -# Echo program name prefixed message to standard error, followed by -# a help hint, and exit. -func_fatal_help () -{ - $debug_cmd - - eval \$ECHO \""Usage: $usage"\" - eval \$ECHO \""$fatal_help"\" - func_error ${1+"$@"} - exit $EXIT_FAILURE -} - - -# func_help -# --------- -# Echo long help message to standard output and exit. -func_help () -{ - $debug_cmd - - func_usage_message - $ECHO "$long_help_message" - exit 0 -} - - -# func_missing_arg ARGNAME -# ------------------------ -# Echo program name prefixed message to standard error and set global -# exit_cmd. -func_missing_arg () -{ - $debug_cmd - - func_error "Missing argument for '$1'." - exit_cmd=exit -} - - -# func_split_equals STRING -# ------------------------ -# Set func_split_equals_lhs and func_split_equals_rhs shell variables after -# splitting STRING at the '=' sign. -test -z "$_G_HAVE_XSI_OPS" \ - && (eval 'x=a/b/c; - test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ - && _G_HAVE_XSI_OPS=yes - -if test yes = "$_G_HAVE_XSI_OPS" -then - # This is an XSI compatible shell, allowing a faster implementation... - eval 'func_split_equals () - { - $debug_cmd - - func_split_equals_lhs=${1%%=*} - func_split_equals_rhs=${1#*=} - test "x$func_split_equals_lhs" = "x$1" \ - && func_split_equals_rhs= - }' -else - # ...otherwise fall back to using expr, which is often a shell builtin. - func_split_equals () - { - $debug_cmd - - func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'` - func_split_equals_rhs= - test "x$func_split_equals_lhs" = "x$1" \ - || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'` - } -fi #func_split_equals - - -# func_split_short_opt SHORTOPT -# ----------------------------- -# Set func_split_short_opt_name and func_split_short_opt_arg shell -# variables after splitting SHORTOPT after the 2nd character. -if test yes = "$_G_HAVE_XSI_OPS" -then - # This is an XSI compatible shell, allowing a faster implementation... - eval 'func_split_short_opt () - { - $debug_cmd - - func_split_short_opt_arg=${1#??} - func_split_short_opt_name=${1%"$func_split_short_opt_arg"} - }' -else - # ...otherwise fall back to using expr, which is often a shell builtin. - func_split_short_opt () - { - $debug_cmd - - func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'` - func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'` - } -fi #func_split_short_opt - - -# func_usage -# ---------- -# Echo short help message to standard output and exit. -func_usage () -{ - $debug_cmd - - func_usage_message - $ECHO "Run '$progname --help |${PAGER-more}' for full usage" - exit 0 -} - - -# func_usage_message -# ------------------ -# Echo short help message to standard output. -func_usage_message () -{ - $debug_cmd - - eval \$ECHO \""Usage: $usage"\" - echo - $SED -n 's|^# || - /^Written by/{ - x;p;x - } - h - /^Written by/q' < "$progpath" - echo - eval \$ECHO \""$usage_message"\" -} - - -# func_version -# ------------ -# Echo version message to standard output and exit. -func_version () -{ - $debug_cmd - - printf '%s\n' "$progname $scriptversion" - $SED -n ' - /(C)/!b go - :more - /\./!{ - N - s|\n# | | - b more - } - :go - /^# Written by /,/# warranty; / { - s|^# || - s|^# *$|| - s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| - p - } - /^# Written by / { - s|^# || - p - } - /^warranty; /q' < "$progpath" - - exit $? -} - - -# Local variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" -# time-stamp-time-zone: "UTC" -# End: - -# Set a version string. -scriptversion='(GNU libtool) 2.4.6' - - -# func_echo ARG... -# ---------------- -# Libtool also displays the current mode in messages, so override -# funclib.sh func_echo with this custom definition. -func_echo () -{ - $debug_cmd - - _G_message=$* - - func_echo_IFS=$IFS - IFS=$nl - for _G_line in $_G_message; do - IFS=$func_echo_IFS - $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line" - done - IFS=$func_echo_IFS -} - - -# func_warning ARG... -# ------------------- -# Libtool warnings are not categorized, so override funclib.sh -# func_warning with this simpler definition. -func_warning () -{ - $debug_cmd - - $warning_func ${1+"$@"} -} - - -## ---------------- ## -## Options parsing. ## -## ---------------- ## - -# Hook in the functions to make sure our own options are parsed during -# the option parsing loop. - -usage='$progpath [OPTION]... [MODE-ARG]...' - -# Short help message in response to '-h'. -usage_message="Options: - --config show all configuration variables - --debug enable verbose shell tracing - -n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --mode=MODE use operation mode MODE - --no-warnings equivalent to '-Wnone' - --preserve-dup-deps don't remove duplicate dependency libraries - --quiet, --silent don't print informational messages - --tag=TAG use configuration variables from tag TAG - -v, --verbose print more informational messages than default - --version print version information - -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] - -h, --help, --help-all print short, long, or detailed help message -" - -# Additional text appended to 'usage_message' in response to '--help'. -func_help () -{ - $debug_cmd - - func_usage_message - $ECHO "$long_help_message - -MODE must be one of the following: - - clean remove files from the build directory - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. When passed as first option, -'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that. -Try '$progname --help --mode=MODE' for a more detailed description of MODE. - -When reporting a bug, please describe a test case to reproduce it and -include the following information: - - host-triplet: $host - shell: $SHELL - compiler: $LTCC - compiler flags: $LTCFLAGS - linker: $LD (gnu? $with_gnu_ld) - version: $progname (GNU libtool) 2.4.6 - automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` - autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` - -Report bugs to . -GNU libtool home page: . -General help using GNU software: ." - exit 0 -} - - -# func_lo2o OBJECT-NAME -# --------------------- -# Transform OBJECT-NAME from a '.lo' suffix to the platform specific -# object suffix. - -lo2o=s/\\.lo\$/.$objext/ -o2lo=s/\\.$objext\$/.lo/ - -if test yes = "$_G_HAVE_XSI_OPS"; then - eval 'func_lo2o () - { - case $1 in - *.lo) func_lo2o_result=${1%.lo}.$objext ;; - * ) func_lo2o_result=$1 ;; - esac - }' - - # func_xform LIBOBJ-OR-SOURCE - # --------------------------- - # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise) - # suffix to a '.lo' libtool-object suffix. - eval 'func_xform () - { - func_xform_result=${1%.*}.lo - }' -else - # ...otherwise fall back to using sed. - func_lo2o () - { - func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"` - } - - func_xform () - { - func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'` - } -fi - - -# func_fatal_configuration ARG... -# ------------------------------- -# Echo program name prefixed message to standard error, followed by -# a configuration failure hint, and exit. -func_fatal_configuration () -{ - func__fatal_error ${1+"$@"} \ - "See the $PACKAGE documentation for more information." \ - "Fatal configuration error." -} - - -# func_config -# ----------- -# Display the configuration for all the tags in this script. -func_config () -{ - re_begincf='^# ### BEGIN LIBTOOL' - re_endcf='^# ### END LIBTOOL' - - # Default configuration. - $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" - - # Now print the configurations for the tags. - for tagname in $taglist; do - $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" - done - - exit $? -} - - -# func_features -# ------------- -# Display the features supported by this script. -func_features () -{ - echo "host: $host" - if test yes = "$build_libtool_libs"; then - echo "enable shared libraries" - else - echo "disable shared libraries" - fi - if test yes = "$build_old_libs"; then - echo "enable static libraries" - else - echo "disable static libraries" - fi - - exit $? -} - - -# func_enable_tag TAGNAME -# ----------------------- -# Verify that TAGNAME is valid, and either flag an error and exit, or -# enable the TAGNAME tag. We also add TAGNAME to the global $taglist -# variable here. -func_enable_tag () -{ - # Global variable: - tagname=$1 - - re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" - re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" - sed_extractcf=/$re_begincf/,/$re_endcf/p - - # Validate tagname. - case $tagname in - *[!-_A-Za-z0-9,/]*) - func_fatal_error "invalid tag name: $tagname" - ;; - esac - - # Don't test for the "default" C tag, as we know it's - # there but not specially marked. - case $tagname in - CC) ;; - *) - if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then - taglist="$taglist $tagname" - - # Evaluate the configuration. Be careful to quote the path - # and the sed script, to avoid splitting on whitespace, but - # also don't use non-portable quotes within backquotes within - # quotes we have to do it in 2 steps: - extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` - eval "$extractedcf" - else - func_error "ignoring unknown tag $tagname" - fi - ;; - esac -} - - -# func_check_version_match -# ------------------------ -# Ensure that we are using m4 macros, and libtool script from the same -# release of libtool. -func_check_version_match () -{ - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from an older release. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - fi - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -$progname: but the definition of this LT_INIT comes from revision $macro_revision. -$progname: You should recreate aclocal.m4 with macros from revision $package_revision -$progname: of $PACKAGE $VERSION and run autoconf again. -_LT_EOF - fi - - exit $EXIT_MISMATCH - fi -} - - -# libtool_options_prep [ARG]... -# ----------------------------- -# Preparation for options parsed by libtool. -libtool_options_prep () -{ - $debug_mode - - # Option defaults: - opt_config=false - opt_dlopen= - opt_dry_run=false - opt_help=false - opt_mode= - opt_preserve_dup_deps=false - opt_quiet=false - - nonopt= - preserve_args= - - # Shorthand for --mode=foo, only valid as the first argument - case $1 in - clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; - compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; - execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; - finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; - install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; - link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; - uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; - esac - - # Pass back the list of options. - func_quote_for_eval ${1+"$@"} - libtool_options_prep_result=$func_quote_for_eval_result -} -func_add_hook func_options_prep libtool_options_prep - - -# libtool_parse_options [ARG]... -# --------------------------------- -# Provide handling for libtool specific options. -libtool_parse_options () -{ - $debug_cmd - - # Perform our own loop to consume as many options as possible in - # each iteration. - while test $# -gt 0; do - _G_opt=$1 - shift - case $_G_opt in - --dry-run|--dryrun|-n) - opt_dry_run=: - ;; - - --config) func_config ;; - - --dlopen|-dlopen) - opt_dlopen="${opt_dlopen+$opt_dlopen -}$1" - shift - ;; - - --preserve-dup-deps) - opt_preserve_dup_deps=: ;; - - --features) func_features ;; - - --finish) set dummy --mode finish ${1+"$@"}; shift ;; - - --help) opt_help=: ;; - - --help-all) opt_help=': help-all' ;; - - --mode) test $# = 0 && func_missing_arg $_G_opt && break - opt_mode=$1 - case $1 in - # Valid mode arguments: - clean|compile|execute|finish|install|link|relink|uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $_G_opt" - exit_cmd=exit - break - ;; - esac - shift - ;; - - --no-silent|--no-quiet) - opt_quiet=false - func_append preserve_args " $_G_opt" - ;; - - --no-warnings|--no-warning|--no-warn) - opt_warning=false - func_append preserve_args " $_G_opt" - ;; - - --no-verbose) - opt_verbose=false - func_append preserve_args " $_G_opt" - ;; - - --silent|--quiet) - opt_quiet=: - opt_verbose=false - func_append preserve_args " $_G_opt" - ;; - - --tag) test $# = 0 && func_missing_arg $_G_opt && break - opt_tag=$1 - func_append preserve_args " $_G_opt $1" - func_enable_tag "$1" - shift - ;; - - --verbose|-v) opt_quiet=false - opt_verbose=: - func_append preserve_args " $_G_opt" - ;; - - # An option not handled by this hook function: - *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; - esac - done - - - # save modified positional parameters for caller - func_quote_for_eval ${1+"$@"} - libtool_parse_options_result=$func_quote_for_eval_result -} -func_add_hook func_parse_options libtool_parse_options - - - -# libtool_validate_options [ARG]... -# --------------------------------- -# Perform any sanity checks on option settings and/or unconsumed -# arguments. -libtool_validate_options () -{ - # save first non-option argument - if test 0 -lt $#; then - nonopt=$1 - shift - fi - - # preserve --debug - test : = "$debug_cmd" || func_append preserve_args " --debug" - - case $host in - # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452 - # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788 - *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*) - # don't eliminate duplications in $postdeps and $predeps - opt_duplicate_compiler_generated_deps=: - ;; - *) - opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps - ;; - esac - - $opt_help || { - # Sanity checks first: - func_check_version_match - - test yes != "$build_libtool_libs" \ - && test yes != "$build_old_libs" \ - && func_fatal_configuration "not configured to build any kind of library" - - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$opt_dlopen" && test execute != "$opt_mode"; then - func_error "unrecognized option '-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Change the help message to a mode-specific one. - generic_help=$help - help="Try '$progname --help --mode=$opt_mode' for more information." - } - - # Pass back the unparsed argument list - func_quote_for_eval ${1+"$@"} - libtool_validate_options_result=$func_quote_for_eval_result -} -func_add_hook func_validate_options libtool_validate_options - - -# Process options as early as possible so that --help and --version -# can return quickly. -func_options ${1+"$@"} -eval set dummy "$func_options_result"; shift - - - -## ----------- ## -## Main. ## -## ----------- ## - -magic='%%%MAGIC variable%%%' -magic_exe='%%%MAGIC EXE variable%%%' - -# Global variables. -extracted_archives= -extracted_serial=0 - -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= - - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' -} - -# func_generated_by_libtool -# True iff stdin has been generated by Libtool. This function is only -# a basic sanity check; it will hardly flush out determined imposters. -func_generated_by_libtool_p () -{ - $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 -} - -# func_lalib_p file -# True iff FILE is a libtool '.la' library or '.lo' object file. -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_lalib_p () -{ - test -f "$1" && - $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p -} - -# func_lalib_unsafe_p file -# True iff FILE is a libtool '.la' library or '.lo' object file. -# This function implements the same check as func_lalib_p without -# resorting to external programs. To this end, it redirects stdin and -# closes it afterwards, without saving the original file descriptor. -# As a safety measure, use it only where a negative result would be -# fatal anyway. Works if 'file' does not exist. -func_lalib_unsafe_p () -{ - lalib_p=no - if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then - for lalib_p_l in 1 2 3 4 - do - read lalib_p_line - case $lalib_p_line in - \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; - esac - done - exec 0<&5 5<&- - fi - test yes = "$lalib_p" -} - -# func_ltwrapper_script_p file -# True iff FILE is a libtool wrapper script -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_script_p () -{ - test -f "$1" && - $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p -} - -# func_ltwrapper_executable_p file -# True iff FILE is a libtool wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_executable_p () -{ - func_ltwrapper_exec_suffix= - case $1 in - *.exe) ;; - *) func_ltwrapper_exec_suffix=.exe ;; - esac - $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 -} - -# func_ltwrapper_scriptname file -# Assumes file is an ltwrapper_executable -# uses $file to determine the appropriate filename for a -# temporary ltwrapper_script. -func_ltwrapper_scriptname () -{ - func_dirname_and_basename "$1" "" "." - func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper -} - -# func_ltwrapper_p file -# True iff FILE is a libtool wrapper script or wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_p () -{ - func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" -} - - -# func_execute_cmds commands fail_cmd -# Execute tilde-delimited COMMANDS. -# If FAIL_CMD is given, eval that upon failure. -# FAIL_CMD may read-access the current command in variable CMD! -func_execute_cmds () -{ - $debug_cmd - - save_ifs=$IFS; IFS='~' - for cmd in $1; do - IFS=$sp$nl - eval cmd=\"$cmd\" - IFS=$save_ifs - func_show_eval "$cmd" "${2-:}" - done - IFS=$save_ifs -} - - -# func_source file -# Source FILE, adding directory component if necessary. -# Note that it is not necessary on cygwin/mingw to append a dot to -# FILE even if both FILE and FILE.exe exist: automatic-append-.exe -# behavior happens only for exec(3), not for open(2)! Also, sourcing -# 'FILE.' does not work on cygwin managed mounts. -func_source () -{ - $debug_cmd - - case $1 in - */* | *\\*) . "$1" ;; - *) . "./$1" ;; - esac -} - - -# func_resolve_sysroot PATH -# Replace a leading = in PATH with a sysroot. Store the result into -# func_resolve_sysroot_result -func_resolve_sysroot () -{ - func_resolve_sysroot_result=$1 - case $func_resolve_sysroot_result in - =*) - func_stripname '=' '' "$func_resolve_sysroot_result" - func_resolve_sysroot_result=$lt_sysroot$func_stripname_result - ;; - esac -} - -# func_replace_sysroot PATH -# If PATH begins with the sysroot, replace it with = and -# store the result into func_replace_sysroot_result. -func_replace_sysroot () -{ - case $lt_sysroot:$1 in - ?*:"$lt_sysroot"*) - func_stripname "$lt_sysroot" '' "$1" - func_replace_sysroot_result='='$func_stripname_result - ;; - *) - # Including no sysroot. - func_replace_sysroot_result=$1 - ;; - esac -} - -# func_infer_tag arg -# Infer tagged configuration to use if any are available and -# if one wasn't chosen via the "--tag" command line option. -# Only attempt this if the compiler in the base compile -# command doesn't match the default compiler. -# arg is usually of the form 'gcc ...' -func_infer_tag () -{ - $debug_cmd - - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do - func_append_quoted CC_quoted "$arg" - done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. - *) - for z in $available_tags; do - if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then - # Evaluate the configuration. - eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. - func_append_quoted CC_quoted "$arg" - done - CC_expanded=`func_echo_all $CC` - CC_quoted_expanded=`func_echo_all $CC_quoted` - case "$@ " in - " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ - " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - func_echo "unable to infer tagged configuration" - func_fatal_error "specify a tag with '--tag'" -# else -# func_verbose "using $tagname tagged configuration" - fi - ;; - esac - fi -} - - - -# func_write_libtool_object output_name pic_name nonpic_name -# Create a libtool object file (analogous to a ".la" file), -# but don't create it if we're doing a dry run. -func_write_libtool_object () -{ - write_libobj=$1 - if test yes = "$build_libtool_libs"; then - write_lobj=\'$2\' - else - write_lobj=none - fi - - if test yes = "$build_old_libs"; then - write_oldobj=\'$3\' - else - write_oldobj=none - fi - - $opt_dry_run || { - cat >${write_libobj}T </dev/null` - if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then - func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | - $SED -e "$sed_naive_backslashify"` - else - func_convert_core_file_wine_to_w32_result= - fi - fi -} -# end: func_convert_core_file_wine_to_w32 - - -# func_convert_core_path_wine_to_w32 ARG -# Helper function used by path conversion functions when $build is *nix, and -# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly -# configured wine environment available, with the winepath program in $build's -# $PATH. Assumes ARG has no leading or trailing path separator characters. -# -# ARG is path to be converted from $build format to win32. -# Result is available in $func_convert_core_path_wine_to_w32_result. -# Unconvertible file (directory) names in ARG are skipped; if no directory names -# are convertible, then the result may be empty. -func_convert_core_path_wine_to_w32 () -{ - $debug_cmd - - # unfortunately, winepath doesn't convert paths, only file names - func_convert_core_path_wine_to_w32_result= - if test -n "$1"; then - oldIFS=$IFS - IFS=: - for func_convert_core_path_wine_to_w32_f in $1; do - IFS=$oldIFS - func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" - if test -n "$func_convert_core_file_wine_to_w32_result"; then - if test -z "$func_convert_core_path_wine_to_w32_result"; then - func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result - else - func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" - fi - fi - done - IFS=$oldIFS - fi -} -# end: func_convert_core_path_wine_to_w32 - - -# func_cygpath ARGS... -# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when -# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) -# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or -# (2), returns the Cygwin file name or path in func_cygpath_result (input -# file name or path is assumed to be in w32 format, as previously converted -# from $build's *nix or MSYS format). In case (3), returns the w32 file name -# or path in func_cygpath_result (input file name or path is assumed to be in -# Cygwin format). Returns an empty string on error. -# -# ARGS are passed to cygpath, with the last one being the file name or path to -# be converted. -# -# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH -# environment variable; do not put it in $PATH. -func_cygpath () -{ - $debug_cmd - - if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then - func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` - if test "$?" -ne 0; then - # on failure, ensure result is empty - func_cygpath_result= - fi - else - func_cygpath_result= - func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'" - fi -} -#end: func_cygpath - - -# func_convert_core_msys_to_w32 ARG -# Convert file name or path ARG from MSYS format to w32 format. Return -# result in func_convert_core_msys_to_w32_result. -func_convert_core_msys_to_w32 () -{ - $debug_cmd - - # awkward: cmd appends spaces to result - func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | - $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"` -} -#end: func_convert_core_msys_to_w32 - - -# func_convert_file_check ARG1 ARG2 -# Verify that ARG1 (a file name in $build format) was converted to $host -# format in ARG2. Otherwise, emit an error message, but continue (resetting -# func_to_host_file_result to ARG1). -func_convert_file_check () -{ - $debug_cmd - - if test -z "$2" && test -n "$1"; then - func_error "Could not determine host file name corresponding to" - func_error " '$1'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback: - func_to_host_file_result=$1 - fi -} -# end func_convert_file_check - - -# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH -# Verify that FROM_PATH (a path in $build format) was converted to $host -# format in TO_PATH. Otherwise, emit an error message, but continue, resetting -# func_to_host_file_result to a simplistic fallback value (see below). -func_convert_path_check () -{ - $debug_cmd - - if test -z "$4" && test -n "$3"; then - func_error "Could not determine the host path corresponding to" - func_error " '$3'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback. This is a deliberately simplistic "conversion" and - # should not be "improved". See libtool.info. - if test "x$1" != "x$2"; then - lt_replace_pathsep_chars="s|$1|$2|g" - func_to_host_path_result=`echo "$3" | - $SED -e "$lt_replace_pathsep_chars"` - else - func_to_host_path_result=$3 - fi - fi -} -# end func_convert_path_check - - -# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG -# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT -# and appending REPL if ORIG matches BACKPAT. -func_convert_path_front_back_pathsep () -{ - $debug_cmd - - case $4 in - $1 ) func_to_host_path_result=$3$func_to_host_path_result - ;; - esac - case $4 in - $2 ) func_append func_to_host_path_result "$3" - ;; - esac -} -# end func_convert_path_front_back_pathsep - - -################################################## -# $build to $host FILE NAME CONVERSION FUNCTIONS # -################################################## -# invoked via '$to_host_file_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# Result will be available in $func_to_host_file_result. - - -# func_to_host_file ARG -# Converts the file name ARG from $build format to $host format. Return result -# in func_to_host_file_result. -func_to_host_file () -{ - $debug_cmd - - $to_host_file_cmd "$1" -} -# end func_to_host_file - - -# func_to_tool_file ARG LAZY -# converts the file name ARG from $build format to toolchain format. Return -# result in func_to_tool_file_result. If the conversion in use is listed -# in (the comma separated) LAZY, no conversion takes place. -func_to_tool_file () -{ - $debug_cmd - - case ,$2, in - *,"$to_tool_file_cmd",*) - func_to_tool_file_result=$1 - ;; - *) - $to_tool_file_cmd "$1" - func_to_tool_file_result=$func_to_host_file_result - ;; - esac -} -# end func_to_tool_file - - -# func_convert_file_noop ARG -# Copy ARG to func_to_host_file_result. -func_convert_file_noop () -{ - func_to_host_file_result=$1 -} -# end func_convert_file_noop - - -# func_convert_file_msys_to_w32 ARG -# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_file_result. -func_convert_file_msys_to_w32 () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_to_host_file_result=$func_convert_core_msys_to_w32_result - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_w32 - - -# func_convert_file_cygwin_to_w32 ARG -# Convert file name ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_file_cygwin_to_w32 () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - # because $build is cygwin, we call "the" cygpath in $PATH; no need to use - # LT_CYGPATH in this case. - func_to_host_file_result=`cygpath -m "$1"` - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_cygwin_to_w32 - - -# func_convert_file_nix_to_w32 ARG -# Convert file name ARG from *nix to w32 format. Requires a wine environment -# and a working winepath. Returns result in func_to_host_file_result. -func_convert_file_nix_to_w32 () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - func_convert_core_file_wine_to_w32 "$1" - func_to_host_file_result=$func_convert_core_file_wine_to_w32_result - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_w32 - - -# func_convert_file_msys_to_cygwin ARG -# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_file_msys_to_cygwin () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - func_convert_core_msys_to_w32 "$1" - func_cygpath -u "$func_convert_core_msys_to_w32_result" - func_to_host_file_result=$func_cygpath_result - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_msys_to_cygwin - - -# func_convert_file_nix_to_cygwin ARG -# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed -# in a wine environment, working winepath, and LT_CYGPATH set. Returns result -# in func_to_host_file_result. -func_convert_file_nix_to_cygwin () -{ - $debug_cmd - - func_to_host_file_result=$1 - if test -n "$1"; then - # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. - func_convert_core_file_wine_to_w32 "$1" - func_cygpath -u "$func_convert_core_file_wine_to_w32_result" - func_to_host_file_result=$func_cygpath_result - fi - func_convert_file_check "$1" "$func_to_host_file_result" -} -# end func_convert_file_nix_to_cygwin - - -############################################# -# $build to $host PATH CONVERSION FUNCTIONS # -############################################# -# invoked via '$to_host_path_cmd ARG' -# -# In each case, ARG is the path to be converted from $build to $host format. -# The result will be available in $func_to_host_path_result. -# -# Path separators are also converted from $build format to $host format. If -# ARG begins or ends with a path separator character, it is preserved (but -# converted to $host format) on output. -# -# All path conversion functions are named using the following convention: -# file name conversion function : func_convert_file_X_to_Y () -# path conversion function : func_convert_path_X_to_Y () -# where, for any given $build/$host combination the 'X_to_Y' value is the -# same. If conversion functions are added for new $build/$host combinations, -# the two new functions must follow this pattern, or func_init_to_host_path_cmd -# will break. - - -# func_init_to_host_path_cmd -# Ensures that function "pointer" variable $to_host_path_cmd is set to the -# appropriate value, based on the value of $to_host_file_cmd. -to_host_path_cmd= -func_init_to_host_path_cmd () -{ - $debug_cmd - - if test -z "$to_host_path_cmd"; then - func_stripname 'func_convert_file_' '' "$to_host_file_cmd" - to_host_path_cmd=func_convert_path_$func_stripname_result - fi -} - - -# func_to_host_path ARG -# Converts the path ARG from $build format to $host format. Return result -# in func_to_host_path_result. -func_to_host_path () -{ - $debug_cmd - - func_init_to_host_path_cmd - $to_host_path_cmd "$1" -} -# end func_to_host_path - - -# func_convert_path_noop ARG -# Copy ARG to func_to_host_path_result. -func_convert_path_noop () -{ - func_to_host_path_result=$1 -} -# end func_convert_path_noop - - -# func_convert_path_msys_to_w32 ARG -# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic -# conversion to w32 is not available inside the cwrapper. Returns result in -# func_to_host_path_result. -func_convert_path_msys_to_w32 () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # Remove leading and trailing path separator characters from ARG. MSYS - # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; - # and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result=$func_convert_core_msys_to_w32_result - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_msys_to_w32 - - -# func_convert_path_cygwin_to_w32 ARG -# Convert path ARG from Cygwin to w32 format. Returns result in -# func_to_host_file_result. -func_convert_path_cygwin_to_w32 () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_cygwin_to_w32 - - -# func_convert_path_nix_to_w32 ARG -# Convert path ARG from *nix to w32 format. Requires a wine environment and -# a working winepath. Returns result in func_to_host_file_result. -func_convert_path_nix_to_w32 () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_to_host_path_result=$func_convert_core_path_wine_to_w32_result - func_convert_path_check : ";" \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" - fi -} -# end func_convert_path_nix_to_w32 - - -# func_convert_path_msys_to_cygwin ARG -# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. -# Returns result in func_to_host_file_result. -func_convert_path_msys_to_cygwin () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # See func_convert_path_msys_to_w32: - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_msys_to_w32_result" - func_to_host_path_result=$func_cygpath_result - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi -} -# end func_convert_path_msys_to_cygwin - - -# func_convert_path_nix_to_cygwin ARG -# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a -# a wine environment, working winepath, and LT_CYGPATH set. Returns result in -# func_to_host_file_result. -func_convert_path_nix_to_cygwin () -{ - $debug_cmd - - func_to_host_path_result=$1 - if test -n "$1"; then - # Remove leading and trailing path separator characters from - # ARG. msys behavior is inconsistent here, cygpath turns them - # into '.;' and ';.', and winepath ignores them completely. - func_stripname : : "$1" - func_to_host_path_tmp1=$func_stripname_result - func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" - func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" - func_to_host_path_result=$func_cygpath_result - func_convert_path_check : : \ - "$func_to_host_path_tmp1" "$func_to_host_path_result" - func_convert_path_front_back_pathsep ":*" "*:" : "$1" - fi -} -# end func_convert_path_nix_to_cygwin - - -# func_dll_def_p FILE -# True iff FILE is a Windows DLL '.def' file. -# Keep in sync with _LT_DLL_DEF_P in libtool.m4 -func_dll_def_p () -{ - $debug_cmd - - func_dll_def_p_tmp=`$SED -n \ - -e 's/^[ ]*//' \ - -e '/^\(;.*\)*$/d' \ - -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \ - -e q \ - "$1"` - test DEF = "$func_dll_def_p_tmp" -} - - -# func_mode_compile arg... -func_mode_compile () -{ - $debug_cmd - - # Get the compilation command and the source file. - base_compile= - srcfile=$nonopt # always keep a non-empty value in "srcfile" - suppress_opt=yes - suppress_output= - arg_mode=normal - libobj= - later= - pie_flag= - - for arg - do - case $arg_mode in - arg ) - # do not "continue". Instead, add this to base_compile - lastarg=$arg - arg_mode=normal - ;; - - target ) - libobj=$arg - arg_mode=normal - continue - ;; - - normal ) - # Accept any command-line options. - case $arg in - -o) - test -n "$libobj" && \ - func_fatal_error "you cannot specify '-o' more than once" - arg_mode=target - continue - ;; - - -pie | -fpie | -fPIE) - func_append pie_flag " $arg" - continue - ;; - - -shared | -static | -prefer-pic | -prefer-non-pic) - func_append later " $arg" - continue - ;; - - -no-suppress) - suppress_opt=no - continue - ;; - - -Xcompiler) - arg_mode=arg # the next one goes into the "base_compile" arg list - continue # The current "srcfile" will either be retained or - ;; # replaced later. I would guess that would be a bug. - - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result - lastarg= - save_ifs=$IFS; IFS=, - for arg in $args; do - IFS=$save_ifs - func_append_quoted lastarg "$arg" - done - IFS=$save_ifs - func_stripname ' ' '' "$lastarg" - lastarg=$func_stripname_result - - # Add the arguments to base_compile. - func_append base_compile " $lastarg" - continue - ;; - - *) - # Accept the current argument as the source file. - # The previous "srcfile" becomes the current argument. - # - lastarg=$srcfile - srcfile=$arg - ;; - esac # case $arg - ;; - esac # case $arg_mode - - # Aesthetically quote the previous argument. - func_append_quoted base_compile "$lastarg" - done # for arg - - case $arg_mode in - arg) - func_fatal_error "you must specify an argument for -Xcompile" - ;; - target) - func_fatal_error "you must specify a target with '-o'" - ;; - *) - # Get the name of the library object. - test -z "$libobj" && { - func_basename "$srcfile" - libobj=$func_basename_result - } - ;; - esac - - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - case $libobj in - *.[cCFSifmso] | \ - *.ada | *.adb | *.ads | *.asm | \ - *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ - *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) - func_xform "$libobj" - libobj=$func_xform_result - ;; - esac - - case $libobj in - *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; - *) - func_fatal_error "cannot determine name of library object from '$libobj'" - ;; - esac - - func_infer_tag $base_compile - - for arg in $later; do - case $arg in - -shared) - test yes = "$build_libtool_libs" \ - || func_fatal_configuration "cannot build a shared library" - build_old_libs=no - continue - ;; - - -static) - build_libtool_libs=no - build_old_libs=yes - continue - ;; - - -prefer-pic) - pic_mode=yes - continue - ;; - - -prefer-non-pic) - pic_mode=no - continue - ;; - esac - done - - func_quote_for_eval "$libobj" - test "X$libobj" != "X$func_quote_for_eval_result" \ - && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && func_warning "libobj name '$libobj' may not contain shell special characters." - func_dirname_and_basename "$obj" "/" "" - objname=$func_basename_result - xdir=$func_dirname_result - lobj=$xdir$objdir/$objname - - test -z "$base_compile" && \ - func_fatal_help "you must specify a compilation command" - - # Delete any leftover library objects. - if test yes = "$build_old_libs"; then - removelist="$obj $lobj $libobj ${libobj}T" - else - removelist="$lobj $libobj ${libobj}T" - fi - - # On Cygwin there's no "real" PIC flag so we must build both object types - case $host_os in - cygwin* | mingw* | pw32* | os2* | cegcc*) - pic_mode=default - ;; - esac - if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then - # non-PIC code in shared libraries is not supported - pic_mode=default - fi - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test no = "$compiler_c_o"; then - output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext - lockfile=$output_obj.lock - else - output_obj= - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test yes = "$need_locks"; then - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - elif test warn = "$need_locks"; then - if test -f "$lockfile"; then - $ECHO "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support '-c' and '-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - func_append removelist " $output_obj" - $ECHO "$srcfile" > "$lockfile" - fi - - $opt_dry_run || $RM $removelist - func_append removelist " $lockfile" - trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - - func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 - srcfile=$func_to_tool_file_result - func_quote_for_eval "$srcfile" - qsrcfile=$func_quote_for_eval_result - - # Only build a PIC object if we are building libtool libraries. - if test yes = "$build_libtool_libs"; then - # Without this assignment, base_compile gets emptied. - fbsd_hideous_sh_bug=$base_compile - - if test no != "$pic_mode"; then - command="$base_compile $qsrcfile $pic_flag" - else - # Don't build PIC code - command="$base_compile $qsrcfile" - fi - - func_mkdir_p "$xdir$objdir" - - if test -z "$output_obj"; then - # Place PIC objects in $objdir - func_append command " -o $lobj" - fi - - func_show_eval_locale "$command" \ - 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' - - if test warn = "$need_locks" && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support '-c' and '-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed, then go on to compile the next one - if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - func_show_eval '$MV "$output_obj" "$lobj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - - # Allow error messages only from the first compilation. - if test yes = "$suppress_opt"; then - suppress_output=' >/dev/null 2>&1' - fi - fi - - # Only build a position-dependent object if we build old libraries. - if test yes = "$build_old_libs"; then - if test yes != "$pic_mode"; then - # Don't build PIC code - command="$base_compile $qsrcfile$pie_flag" - else - command="$base_compile $qsrcfile $pic_flag" - fi - if test yes = "$compiler_c_o"; then - func_append command " -o $obj" - fi - - # Suppress compiler output if we already did a PIC compilation. - func_append command "$suppress_output" - func_show_eval_locale "$command" \ - '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - - if test warn = "$need_locks" && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support '-c' and '-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed - if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - func_show_eval '$MV "$output_obj" "$obj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - fi - - $opt_dry_run || { - func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" - - # Unlock the critical section if it was locked - if test no != "$need_locks"; then - removelist=$lockfile - $RM "$lockfile" - fi - } - - exit $EXIT_SUCCESS -} - -$opt_help || { - test compile = "$opt_mode" && func_mode_compile ${1+"$@"} -} - -func_mode_help () -{ - # We need to display help for each of the modes. - case $opt_mode in - "") - # Generic help is extracted from the usage comments - # at the start of this file. - func_help - ;; - - clean) - $ECHO \ -"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - - compile) - $ECHO \ -"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -no-suppress do not suppress compiler output for multiple passes - -prefer-pic try to build PIC objects only - -prefer-non-pic try to build non-PIC objects only - -shared do not build a '.o' file suitable for static linking - -static only build a '.o' file suitable for static linking - -Wc,FLAG pass FLAG directly to the compiler - -COMPILE-COMMAND is a command to be used in creating a 'standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix '.c' with the -library object suffix, '.lo'." - ;; - - execute) - $ECHO \ -"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to '-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - - finish) - $ECHO \ -"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the '--dry-run' option if you just want to see what would be executed." - ;; - - install) - $ECHO \ -"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the 'install' or 'cp' program. - -The following components of INSTALL-COMMAND are treated specially: - - -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - - link) - $ECHO \ -"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -bindir BINDIR specify path to binaries directory (for systems where - libraries must be found in the PATH setting at runtime) - -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE use a list of object files found in FILE to specify objects - -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes) - -precious-files-regex REGEX - don't remove output files matching REGEX - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -shared only do dynamic linking of libtool libraries - -shrext SUFFIX override the standard shared library file extension - -static do not do any dynamic linking of uninstalled libtool libraries - -static-libtool-libs - do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -weak LIBNAME declare that the target provides the LIBNAME interface - -Wc,FLAG - -Xcompiler FLAG pass linker-specific FLAG directly to the compiler - -Wl,FLAG - -Xlinker FLAG pass linker-specific FLAG directly to the linker - -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) - -All other options (arguments beginning with '-') are ignored. - -Every other argument is treated as a filename. Files ending in '.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in '.la', then a libtool library is created, -only library objects ('.lo' files) may be specified, and '-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created -using 'ar' and 'ranlib', or on Windows using 'lib'. - -If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file -is created, otherwise an executable program is created." - ;; - - uninstall) - $ECHO \ -"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - - *) - func_fatal_help "invalid operation mode '$opt_mode'" - ;; - esac - - echo - $ECHO "Try '$progname --help' for more information about other modes." -} - -# Now that we've collected a possible --mode arg, show help if necessary -if $opt_help; then - if test : = "$opt_help"; then - func_mode_help - else - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - func_mode_help - done - } | $SED -n '1p; 2,$s/^Usage:/ or: /p' - { - func_help noexit - for opt_mode in compile link execute install finish uninstall clean; do - echo - func_mode_help - done - } | - $SED '1d - /^When reporting/,/^Report/{ - H - d - } - $x - /information about other modes/d - /more detailed .*MODE/d - s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' - fi - exit $? -fi - - -# func_mode_execute arg... -func_mode_execute () -{ - $debug_cmd - - # The first argument is the command name. - cmd=$nonopt - test -z "$cmd" && \ - func_fatal_help "you must specify a COMMAND" - - # Handle -dlopen flags immediately. - for file in $opt_dlopen; do - test -f "$file" \ - || func_fatal_help "'$file' is not a file" - - dir= - case $file in - *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "'$lib' is not a valid libtool archive" - - # Read the libtool library. - dlname= - library_names= - func_source "$file" - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && \ - func_warning "'$file' was not linked with '-export-dynamic'" - continue - fi - - func_dirname "$file" "" "." - dir=$func_dirname_result - - if test -f "$dir/$objdir/$dlname"; then - func_append dir "/$objdir" - else - if test ! -f "$dir/$dlname"; then - func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'" - fi - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - func_dirname "$file" "" "." - dir=$func_dirname_result - ;; - - *) - func_warning "'-dlopen' is ignored for non-libtool libraries and objects" - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir=$absdir - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic=$magic - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -* | *.la | *.lo ) ;; - *) - # Do a test to see if this is really a libtool program. - if func_ltwrapper_script_p "$file"; then - func_source "$file" - # Transform arg to wrapped name. - file=$progdir/$program - elif func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - func_source "$func_ltwrapper_scriptname_result" - # Transform arg to wrapped name. - file=$progdir/$program - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - func_append_quoted args "$file" - done - - if $opt_dry_run; then - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - echo "export $shlibpath_var" - fi - $ECHO "$cmd$args" - exit $EXIT_SUCCESS - else - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi - - # Restore saved environment variables - for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES - do - eval "if test \"\${save_$lt_var+set}\" = set; then - $lt_var=\$save_$lt_var; export $lt_var - else - $lt_unset $lt_var - fi" - done - - # Now prepare to actually exec the command. - exec_cmd=\$cmd$args - fi -} - -test execute = "$opt_mode" && func_mode_execute ${1+"$@"} - - -# func_mode_finish arg... -func_mode_finish () -{ - $debug_cmd - - libs= - libdirs= - admincmds= - - for opt in "$nonopt" ${1+"$@"} - do - if test -d "$opt"; then - func_append libdirs " $opt" - - elif test -f "$opt"; then - if func_lalib_unsafe_p "$opt"; then - func_append libs " $opt" - else - func_warning "'$opt' is not a valid libtool archive" - fi - - else - func_fatal_error "invalid argument '$opt'" - fi - done - - if test -n "$libs"; then - if test -n "$lt_sysroot"; then - sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` - sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" - else - sysroot_cmd= - fi - - # Remove sysroot references - if $opt_dry_run; then - for lib in $libs; do - echo "removing references to $lt_sysroot and '=' prefixes from $lib" - done - else - tmpdir=`func_mktempdir` - for lib in $libs; do - $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ - > $tmpdir/tmp-la - mv -f $tmpdir/tmp-la $lib - done - ${RM}r "$tmpdir" - fi - fi - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - func_execute_cmds "$finish_cmds" 'admincmds="$admincmds -'"$cmd"'"' - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $opt_dry_run || eval "$cmds" || func_append admincmds " - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - $opt_quiet && exit $EXIT_SUCCESS - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - $ECHO " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the '-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the '$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the '$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $ECHO " - use the '$flag' linker flag" - fi - if test -n "$admincmds"; then - $ECHO " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'" - fi - echo - - echo "See any operating system documentation about shared libraries for" - case $host in - solaris2.[6789]|solaris2.1[0-9]) - echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" - echo "pages." - ;; - *) - echo "more information, such as the ld(1) and ld.so(8) manual pages." - ;; - esac - echo "----------------------------------------------------------------------" - fi - exit $EXIT_SUCCESS -} - -test finish = "$opt_mode" && func_mode_finish ${1+"$@"} - - -# func_mode_install arg... -func_mode_install () -{ - $debug_cmd - - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" || - # Allow the use of GNU shtool's install command. - case $nonopt in *shtool*) :;; *) false;; esac - then - # Aesthetically quote it. - func_quote_for_eval "$nonopt" - install_prog="$func_quote_for_eval_result " - arg=$1 - shift - else - install_prog= - arg=$nonopt - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - func_quote_for_eval "$arg" - func_append install_prog "$func_quote_for_eval_result" - install_shared_prog=$install_prog - case " $install_prog " in - *[\\\ /]cp\ *) install_cp=: ;; - *) install_cp=false ;; - esac - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=false - stripme= - no_mode=: - for arg - do - arg2= - if test -n "$dest"; then - func_append files " $dest" - dest=$arg - continue - fi - - case $arg in - -d) isdir=: ;; - -f) - if $install_cp; then :; else - prev=$arg - fi - ;; - -g | -m | -o) - prev=$arg - ;; - -s) - stripme=" -s" - continue - ;; - -*) - ;; - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - if test X-m = "X$prev" && test -n "$install_override_mode"; then - arg2=$install_override_mode - no_mode=false - fi - prev= - else - dest=$arg - continue - fi - ;; - esac - - # Aesthetically quote the argument. - func_quote_for_eval "$arg" - func_append install_prog " $func_quote_for_eval_result" - if test -n "$arg2"; then - func_quote_for_eval "$arg2" - fi - func_append install_shared_prog " $func_quote_for_eval_result" - done - - test -z "$install_prog" && \ - func_fatal_help "you must specify an install program" - - test -n "$prev" && \ - func_fatal_help "the '$prev' option requires an argument" - - if test -n "$install_override_mode" && $no_mode; then - if $install_cp; then :; else - func_quote_for_eval "$install_override_mode" - func_append install_shared_prog " -m $func_quote_for_eval_result" - fi - fi - - if test -z "$files"; then - if test -z "$dest"; then - func_fatal_help "no file or destination specified" - else - func_fatal_help "you must specify a destination" - fi - fi - - # Strip any trailing slash from the destination. - func_stripname '' '/' "$dest" - dest=$func_stripname_result - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=: - if $isdir; then - destdir=$dest - destname= - else - func_dirname_and_basename "$dest" "" "." - destdir=$func_dirname_result - destname=$func_basename_result - - # Not a directory, so check to see that there is only one file specified. - set dummy $files; shift - test "$#" -gt 1 && \ - func_fatal_help "'$dest' is not a directory" - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - func_fatal_help "'$destdir' must be an absolute directory name" - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic=$magic - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - func_append staticlibs " $file" - ;; - - *.la) - func_resolve_sysroot "$file" - file=$func_resolve_sysroot_result - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "'$file' is not a valid libtool archive" - - library_names= - old_library= - relink_command= - func_source "$file" - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) func_append current_libdirs " $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) func_append future_libdirs " $libdir" ;; - esac - fi - - func_dirname "$file" "/" "" - dir=$func_dirname_result - func_append dir "$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. - test "$inst_prefix_dir" = "$destdir" && \ - func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir" - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` - else - relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` - fi - - func_warning "relinking '$file'" - func_show_eval "$relink_command" \ - 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"' - fi - - # See the names of the shared library. - set dummy $library_names; shift - if test -n "$1"; then - realname=$1 - shift - - srcname=$realname - test -n "$relink_command" && srcname=${realname}T - - # Install the shared library and build the symlinks. - func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ - 'exit $?' - tstripme=$stripme - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - case $realname in - *.dll.a) - tstripme= - ;; - esac - ;; - os2*) - case $realname in - *_dll.a) - tstripme= - ;; - esac - ;; - esac - if test -n "$tstripme" && test -n "$striplib"; then - func_show_eval "$striplib $destdir/$realname" 'exit $?' - fi - - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - # Try 'ln -sf' first, because the 'ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. - for linkname - do - test "$linkname" != "$realname" \ - && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" - done - fi - - # Do each command in the postinstall commands. - lib=$destdir/$realname - func_execute_cmds "$postinstall_cmds" 'exit $?' - fi - - # Install the pseudo-library for information purposes. - func_basename "$file" - name=$func_basename_result - instname=$dir/${name}i - func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' - - # Maybe install the static library, too. - test -n "$old_library" && func_append staticlibs " $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile=$destdir/$destname - else - func_basename "$file" - destfile=$func_basename_result - destfile=$destdir/$destfile - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - func_lo2o "$destfile" - staticdest=$func_lo2o_result - ;; - *.$objext) - staticdest=$destfile - destfile= - ;; - *) - func_fatal_help "cannot copy a libtool object to '$destfile'" - ;; - esac - - # Install the libtool object if requested. - test -n "$destfile" && \ - func_show_eval "$install_prog $file $destfile" 'exit $?' - - # Install the old object if enabled. - if test yes = "$build_old_libs"; then - # Deduce the name of the old-style object file. - func_lo2o "$file" - staticobj=$func_lo2o_result - func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' - fi - exit $EXIT_SUCCESS - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile=$destdir/$destname - else - func_basename "$file" - destfile=$func_basename_result - destfile=$destdir/$destfile - fi - - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext= - case $file in - *.exe) - if test ! -f "$file"; then - func_stripname '' '.exe' "$file" - file=$func_stripname_result - stripped_ext=.exe - fi - ;; - esac - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin* | *mingw*) - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - wrapper=$func_ltwrapper_scriptname_result - else - func_stripname '' '.exe' "$file" - wrapper=$func_stripname_result - fi - ;; - *) - wrapper=$file - ;; - esac - if func_ltwrapper_script_p "$wrapper"; then - notinst_deplibs= - relink_command= - - func_source "$wrapper" - - # Check the variables that should have been set. - test -z "$generated_by_libtool_version" && \ - func_fatal_error "invalid libtool wrapper script '$wrapper'" - - finalize=: - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - func_source "$lib" - fi - libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'` - if test -n "$libdir" && test ! -f "$libfile"; then - func_warning "'$lib' has not been installed in '$libdir'" - finalize=false - fi - done - - relink_command= - func_source "$wrapper" - - outputname= - if test no = "$fast_install" && test -n "$relink_command"; then - $opt_dry_run || { - if $finalize; then - tmpdir=`func_mktempdir` - func_basename "$file$stripped_ext" - file=$func_basename_result - outputname=$tmpdir/$file - # Replace the output file specification. - relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` - - $opt_quiet || { - func_quote_for_expand "$relink_command" - eval "func_echo $func_quote_for_expand_result" - } - if eval "$relink_command"; then : - else - func_error "error: relink '$file' with the above command before installing it" - $opt_dry_run || ${RM}r "$tmpdir" - continue - fi - file=$outputname - else - func_warning "cannot relink '$file'" - fi - } - else - # Install the binary that we compiled earlier. - file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyway - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - func_stripname '' '.exe' "$destfile" - destfile=$func_stripname_result - ;; - esac - ;; - esac - func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' - $opt_dry_run || if test -n "$outputname"; then - ${RM}r "$tmpdir" - fi - ;; - esac - done - - for file in $staticlibs; do - func_basename "$file" - name=$func_basename_result - - # Set up the ranlib parameters. - oldlib=$destdir/$name - func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 - tool_oldlib=$func_to_tool_file_result - - func_show_eval "$install_prog \$file \$oldlib" 'exit $?' - - if test -n "$stripme" && test -n "$old_striplib"; then - func_show_eval "$old_striplib $tool_oldlib" 'exit $?' - fi - - # Do each command in the postinstall commands. - func_execute_cmds "$old_postinstall_cmds" 'exit $?' - done - - test -n "$future_libdirs" && \ - func_warning "remember to run '$progname --finish$future_libdirs'" - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - $opt_dry_run && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs' - else - exit $EXIT_SUCCESS - fi -} - -test install = "$opt_mode" && func_mode_install ${1+"$@"} - - -# func_generate_dlsyms outputname originator pic_p -# Extract symbols from dlprefiles and create ${outputname}S.o with -# a dlpreopen symbol table. -func_generate_dlsyms () -{ - $debug_cmd - - my_outputname=$1 - my_originator=$2 - my_pic_p=${3-false} - my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'` - my_dlsyms= - - if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - my_dlsyms=${my_outputname}S.c - else - func_error "not configured to extract global symbols from dlpreopened files" - fi - fi - - if test -n "$my_dlsyms"; then - case $my_dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist=$output_objdir/$my_outputname.nm - - func_show_eval "$RM $nlist ${nlist}S ${nlist}T" - - # Parse the name list into a source file. - func_verbose "creating $output_objdir/$my_dlsyms" - - $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ -/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */ -/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) -#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" -#endif - -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE -/* DATA imports from DLLs on WIN32 can't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined __osf__ -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - -#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) - -/* External symbol declarations for the compiler. */\ -" - - if test yes = "$dlself"; then - func_verbose "generating symbol list for '$output'" - - $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` - for progfile in $progfiles; do - func_to_tool_file "$progfile" func_convert_file_msys_to_w32 - func_verbose "extracting global C symbols from '$func_to_tool_file_result'" - $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $opt_dry_run || { - eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - if test -n "$export_symbols_regex"; then - $opt_dry_run || { - eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols=$output_objdir/$outputname.exp - $opt_dry_run || { - $RM $export_symbols - eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - case $host in - *cygwin* | *mingw* | *cegcc* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' - ;; - esac - } - else - $opt_dry_run || { - eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - case $host in - *cygwin* | *mingw* | *cegcc* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' - ;; - esac - } - fi - fi - - for dlprefile in $dlprefiles; do - func_verbose "extracting global C symbols from '$dlprefile'" - func_basename "$dlprefile" - name=$func_basename_result - case $host in - *cygwin* | *mingw* | *cegcc* ) - # if an import library, we need to obtain dlname - if func_win32_import_lib_p "$dlprefile"; then - func_tr_sh "$dlprefile" - eval "curr_lafile=\$libfile_$func_tr_sh_result" - dlprefile_dlbasename= - if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then - # Use subshell, to avoid clobbering current variable values - dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` - if test -n "$dlprefile_dlname"; then - func_basename "$dlprefile_dlname" - dlprefile_dlbasename=$func_basename_result - else - # no lafile. user explicitly requested -dlpreopen . - $sharedlib_from_linklib_cmd "$dlprefile" - dlprefile_dlbasename=$sharedlib_from_linklib_result - fi - fi - $opt_dry_run || { - if test -n "$dlprefile_dlbasename"; then - eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' - else - func_warning "Could not compute DLL name from $name" - eval '$ECHO ": $name " >> "$nlist"' - fi - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | - $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" - } - else # not an import lib - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - fi - ;; - *) - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - ;; - esac - done - - $opt_dry_run || { - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $MV "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if $GREP -v "^: " < "$nlist" | - if sort -k 3 /dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - $GREP -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' - else - echo '/* NONE */' >> "$output_objdir/$my_dlsyms" - fi - - func_show_eval '$RM "${nlist}I"' - if test -n "$global_symbol_to_import"; then - eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I' - fi - - echo >> "$output_objdir/$my_dlsyms" "\ - -/* The mapping between symbol names and symbols. */ -typedef struct { - const char *name; - void *address; -} lt_dlsymlist; -extern LT_DLSYM_CONST lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[];\ -" - - if test -s "$nlist"I; then - echo >> "$output_objdir/$my_dlsyms" "\ -static void lt_syminit(void) -{ - LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols; - for (; symbol->name; ++symbol) - {" - $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms" - echo >> "$output_objdir/$my_dlsyms" "\ - } -}" - fi - echo >> "$output_objdir/$my_dlsyms" "\ -LT_DLSYM_CONST lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[] = -{ {\"$my_originator\", (void *) 0}," - - if test -s "$nlist"I; then - echo >> "$output_objdir/$my_dlsyms" "\ - {\"@INIT@\", (void *) <_syminit}," - fi - - case $need_lib_prefix in - no) - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - *) - eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - esac - echo >> "$output_objdir/$my_dlsyms" "\ - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_${my_prefix}_LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - } # !$opt_dry_run - - pic_flag_for_symtable= - case "$compile_command " in - *" -static "*) ;; - *) - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; - *-*-hpux*) - pic_flag_for_symtable=" $pic_flag" ;; - *) - $my_pic_p && pic_flag_for_symtable=" $pic_flag" - ;; - esac - ;; - esac - symtab_cflags= - for arg in $LTCFLAGS; do - case $arg in - -pie | -fpie | -fPIE) ;; - *) func_append symtab_cflags " $arg" ;; - esac - done - - # Now compile the dynamic symbol file. - func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' - - # Clean up the generated files. - func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"' - - # Transform the symbol file into the correct name. - symfileobj=$output_objdir/${my_outputname}S.$objext - case $host in - *cygwin* | *mingw* | *cegcc* ) - if test -f "$output_objdir/$my_outputname.def"; then - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - else - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` - fi - ;; - *) - compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` - ;; - esac - ;; - *) - func_fatal_error "unknown suffix for '$my_dlsyms'" - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` - finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` - fi -} - -# func_cygming_gnu_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is a GNU/binutils-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_gnu_implib_p () -{ - $debug_cmd - - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` - test -n "$func_cygming_gnu_implib_tmp" -} - -# func_cygming_ms_implib_p ARG -# This predicate returns with zero status (TRUE) if -# ARG is an MS-style import library. Returns -# with nonzero status (FALSE) otherwise. -func_cygming_ms_implib_p () -{ - $debug_cmd - - func_to_tool_file "$1" func_convert_file_msys_to_w32 - func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` - test -n "$func_cygming_ms_implib_tmp" -} - -# func_win32_libid arg -# return the library type of file 'arg' -# -# Need a lot of goo to handle *both* DLLs and import libs -# Has to be a shell function in order to 'eat' the argument -# that is supplied when $file_magic_command is called. -# Despite the name, also deal with 64 bit binaries. -func_win32_libid () -{ - $debug_cmd - - win32_libid_type=unknown - win32_fileres=`file -L $1 2>/dev/null` - case $win32_fileres in - *ar\ archive\ import\ library*) # definitely import - win32_libid_type="x86 archive import" - ;; - *ar\ archive*) # could be an import, or static - # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then - case $nm_interface in - "MS dumpbin") - if func_cygming_ms_implib_p "$1" || - func_cygming_gnu_implib_p "$1" - then - win32_nmres=import - else - win32_nmres= - fi - ;; - *) - func_to_tool_file "$1" func_convert_file_msys_to_w32 - win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | - $SED -n -e ' - 1,100{ - / I /{ - s|.*|import| - p - q - } - }'` - ;; - esac - case $win32_nmres in - import*) win32_libid_type="x86 archive import";; - *) win32_libid_type="x86 archive static";; - esac - fi - ;; - *DLL*) - win32_libid_type="x86 DLL" - ;; - *executable*) # but shell scripts are "executable" too... - case $win32_fileres in - *MS\ Windows\ PE\ Intel*) - win32_libid_type="x86 DLL" - ;; - esac - ;; - esac - $ECHO "$win32_libid_type" -} - -# func_cygming_dll_for_implib ARG -# -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib () -{ - $debug_cmd - - sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` -} - -# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs -# -# The is the core of a fallback implementation of a -# platform-specific function to extract the name of the -# DLL associated with the specified import library LIBNAME. -# -# SECTION_NAME is either .idata$6 or .idata$7, depending -# on the platform and compiler that created the implib. -# -# Echos the name of the DLL associated with the -# specified import library. -func_cygming_dll_for_implib_fallback_core () -{ - $debug_cmd - - match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` - $OBJDUMP -s --section "$1" "$2" 2>/dev/null | - $SED '/^Contents of section '"$match_literal"':/{ - # Place marker at beginning of archive member dllname section - s/.*/====MARK====/ - p - d - } - # These lines can sometimes be longer than 43 characters, but - # are always uninteresting - /:[ ]*file format pe[i]\{,1\}-/d - /^In archive [^:]*:/d - # Ensure marker is printed - /^====MARK====/p - # Remove all lines with less than 43 characters - /^.\{43\}/!d - # From remaining lines, remove first 43 characters - s/^.\{43\}//' | - $SED -n ' - # Join marker and all lines until next marker into a single line - /^====MARK====/ b para - H - $ b para - b - :para - x - s/\n//g - # Remove the marker - s/^====MARK====// - # Remove trailing dots and whitespace - s/[\. \t]*$// - # Print - /./p' | - # we now have a list, one entry per line, of the stringified - # contents of the appropriate section of all members of the - # archive that possess that section. Heuristic: eliminate - # all those that have a first or second character that is - # a '.' (that is, objdump's representation of an unprintable - # character.) This should work for all archives with less than - # 0x302f exports -- but will fail for DLLs whose name actually - # begins with a literal '.' or a single character followed by - # a '.'. - # - # Of those that remain, print the first one. - $SED -e '/^\./d;/^.\./d;q' -} - -# func_cygming_dll_for_implib_fallback ARG -# Platform-specific function to extract the -# name of the DLL associated with the specified -# import library ARG. -# -# This fallback implementation is for use when $DLLTOOL -# does not support the --identify-strict option. -# Invoked by eval'ing the libtool variable -# $sharedlib_from_linklib_cmd -# Result is available in the variable -# $sharedlib_from_linklib_result -func_cygming_dll_for_implib_fallback () -{ - $debug_cmd - - if func_cygming_gnu_implib_p "$1"; then - # binutils import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` - elif func_cygming_ms_implib_p "$1"; then - # ms-generated import library - sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` - else - # unknown - sharedlib_from_linklib_result= - fi -} - - -# func_extract_an_archive dir oldlib -func_extract_an_archive () -{ - $debug_cmd - - f_ex_an_ar_dir=$1; shift - f_ex_an_ar_oldlib=$1 - if test yes = "$lock_old_archive_extraction"; then - lockfile=$f_ex_an_ar_oldlib.lock - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - fi - func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ - 'stat=$?; rm -f "$lockfile"; exit $stat' - if test yes = "$lock_old_archive_extraction"; then - $opt_dry_run || rm -f "$lockfile" - fi - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : - else - func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" - fi -} - - -# func_extract_archives gentop oldlib ... -func_extract_archives () -{ - $debug_cmd - - my_gentop=$1; shift - my_oldlibs=${1+"$@"} - my_oldobjs= - my_xlib= - my_xabs= - my_xdir= - - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - func_basename "$my_xlib" - my_xlib=$func_basename_result - my_xlib_u=$my_xlib - while :; do - case " $extracted_archives " in - *" $my_xlib_u "*) - func_arith $extracted_serial + 1 - extracted_serial=$func_arith_result - my_xlib_u=lt$extracted_serial-$my_xlib ;; - *) break ;; - esac - done - extracted_archives="$extracted_archives $my_xlib_u" - my_xdir=$my_gentop/$my_xlib_u - - func_mkdir_p "$my_xdir" - - case $host in - *-darwin*) - func_verbose "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - $opt_dry_run || { - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - func_basename "$darwin_archive" - darwin_base_archive=$func_basename_result - darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` - if test -n "$darwin_arches"; then - darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches; do - func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch" - $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive" - cd "unfat-$$/$darwin_base_archive-$darwin_arch" - func_extract_an_archive "`pwd`" "$darwin_base_archive" - cd "$darwin_curdir" - $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" - done # $darwin_arches - ## Okay now we've a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` - $LIPO -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - $RM -rf unfat-$$ - cd "$darwin_orig_dir" - else - cd $darwin_orig_dir - func_extract_an_archive "$my_xdir" "$my_xabs" - fi # $darwin_arches - } # !$opt_dry_run - ;; - *) - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` - done - - func_extract_archives_result=$my_oldobjs -} - - -# func_emit_wrapper [arg=no] -# -# Emit a libtool wrapper script on stdout. -# Don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw -# wrapper executable. Must ONLY be called from within -# func_mode_link because it depends on a number of variables -# set therein. -# -# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -# variable will take. If 'yes', then the emitted script -# will assume that the directory where it is stored is -# the $objdir directory. This is a cygwin/mingw-specific -# behavior. -func_emit_wrapper () -{ - func_emit_wrapper_arg1=${1-no} - - $ECHO "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM (GNU $PACKAGE) $VERSION -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -sed_quote_subst='$sed_quote_subst' - -# Be Bourne compatible -if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variables: - generated_by_libtool_version='$macro_version' - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$ECHO are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - file=\"\$0\"" - - qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` - $ECHO "\ - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - ECHO=\"$qECHO\" - fi - -# Very basic option parsing. These options are (a) specific to -# the libtool wrapper, (b) are identical between the wrapper -# /script/ and the wrapper /executable/ that is used only on -# windows platforms, and (c) all begin with the string "--lt-" -# (application programs are unlikely to have options that match -# this pattern). -# -# There are only two supported options: --lt-debug and -# --lt-dump-script. There is, deliberately, no --lt-help. -# -# The first argument to this parsing function should be the -# script's $0 value, followed by "$@". -lt_option_debug= -func_parse_lt_options () -{ - lt_script_arg0=\$0 - shift - for lt_opt - do - case \"\$lt_opt\" in - --lt-debug) lt_option_debug=1 ;; - --lt-dump-script) - lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` - test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. - lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` - cat \"\$lt_dump_D/\$lt_dump_F\" - exit 0 - ;; - --lt-*) - \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 - exit 1 - ;; - esac - done - - # Print the debug banner immediately: - if test -n \"\$lt_option_debug\"; then - echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2 - fi -} - -# Used when --lt-debug. Prints its arguments to stdout -# (redirection is the responsibility of the caller) -func_lt_dump_args () -{ - lt_dump_args_N=1; - for lt_arg - do - \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\" - lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` - done -} - -# Core function for launching the target application -func_exec_program_core () -{ -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2* | *-cegcc*) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; - - *) - $ECHO "\ - if test -n \"\$lt_option_debug\"; then - \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2 - func_lt_dump_args \${1+\"\$@\"} 1>&2 - fi - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" - ;; - esac - $ECHO "\ - \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 - exit 1 -} - -# A function to encapsulate launching the target application -# Strips options in the --lt-* namespace from \$@ and -# launches target application with the remaining arguments. -func_exec_program () -{ - case \" \$* \" in - *\\ --lt-*) - for lt_wr_arg - do - case \$lt_wr_arg in - --lt-*) ;; - *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; - esac - shift - done ;; - esac - func_exec_program_core \${1+\"\$@\"} -} - - # Parse options - func_parse_lt_options \"\$0\" \${1+\"\$@\"} - - # Find the directory that this script lives in. - thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` - done - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 - if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then - # special case for '.' - if test \"\$thisdir\" = \".\"; then - thisdir=\`pwd\` - fi - # remove .libs from thisdir - case \"\$thisdir\" in - *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; - $objdir ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test yes = "$fast_install"; then - $ECHO "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $MKDIR \"\$progdir\" - else - $RM \"\$progdir/\$file\" - fi" - - $ECHO "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - \$ECHO \"\$relink_command_output\" >&2 - $RM \"\$progdir/\$file\" - exit 1 - fi - fi - - $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $RM \"\$progdir/\$program\"; - $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $RM \"\$progdir/\$file\" - fi" - else - $ECHO "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - $ECHO "\ - - if test -f \"\$progdir/\$program\"; then" - - # fixup the dll searchpath if we need to. - # - # Fix the DLL searchpath if we need to. Do this before prepending - # to shlibpath, because on Windows, both are PATH and uninstalled - # libraries must come first. - if test -n "$dllsearchpath"; then - $ECHO "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - # Export our shlibpath_var if we have one. - if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $ECHO "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` - - export $shlibpath_var -" - fi - - $ECHO "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. - func_exec_program \${1+\"\$@\"} - fi - else - # The program doesn't exist. - \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2 - \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 - \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" -} - - -# func_emit_cwrapperexe_src -# emit the source code for a wrapper executable on stdout -# Must ONLY be called from within func_mode_link because -# it depends on a number of variable set therein. -func_emit_cwrapperexe_src () -{ - cat < -#include -#ifdef _MSC_VER -# include -# include -# include -#else -# include -# include -# ifdef __CYGWIN__ -# include -# endif -#endif -#include -#include -#include -#include -#include -#include -#include -#include - -#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0) - -/* declarations of non-ANSI functions */ -#if defined __MINGW32__ -# ifdef __STRICT_ANSI__ -int _putenv (const char *); -# endif -#elif defined __CYGWIN__ -# ifdef __STRICT_ANSI__ -char *realpath (const char *, char *); -int putenv (char *); -int setenv (const char *, const char *, int); -# endif -/* #elif defined other_platform || defined ... */ -#endif - -/* portability defines, excluding path handling macros */ -#if defined _MSC_VER -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -# define S_IXUSR _S_IEXEC -#elif defined __MINGW32__ -# define setmode _setmode -# define stat _stat -# define chmod _chmod -# define getcwd _getcwd -# define putenv _putenv -#elif defined __CYGWIN__ -# define HAVE_SETENV -# define FOPEN_WB "wb" -/* #elif defined other platforms ... */ -#endif - -#if defined PATH_MAX -# define LT_PATHMAX PATH_MAX -#elif defined MAXPATHLEN -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif - -#ifndef S_IXOTH -# define S_IXOTH 0 -#endif -#ifndef S_IXGRP -# define S_IXGRP 0 -#endif - -/* path handling portability macros */ -#ifndef DIR_SEPARATOR -# define DIR_SEPARATOR '/' -# define PATH_SEPARATOR ':' -#endif - -#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \ - defined __OS2__ -# define HAVE_DOS_BASED_FILE_SYSTEM -# define FOPEN_WB "wb" -# ifndef DIR_SEPARATOR_2 -# define DIR_SEPARATOR_2 '\\' -# endif -# ifndef PATH_SEPARATOR_2 -# define PATH_SEPARATOR_2 ';' -# endif -#endif - -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ - -#ifndef PATH_SEPARATOR_2 -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -#else /* PATH_SEPARATOR_2 */ -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -#endif /* PATH_SEPARATOR_2 */ - -#ifndef FOPEN_WB -# define FOPEN_WB "w" -#endif -#ifndef _O_BINARY -# define _O_BINARY 0 -#endif - -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free (stale); stale = 0; } \ -} while (0) - -#if defined LT_DEBUGWRAPPER -static int lt_debug = 1; -#else -static int lt_debug = 0; -#endif - -const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ - -void *xmalloc (size_t num); -char *xstrdup (const char *string); -const char *base_name (const char *name); -char *find_executable (const char *wrapper); -char *chase_symlinks (const char *pathspec); -int make_executable (const char *path); -int check_executable (const char *path); -char *strendzap (char *str, const char *pat); -void lt_debugprintf (const char *file, int line, const char *fmt, ...); -void lt_fatal (const char *file, int line, const char *message, ...); -static const char *nonnull (const char *s); -static const char *nonempty (const char *s); -void lt_setenv (const char *name, const char *value); -char *lt_extend_str (const char *orig_value, const char *add, int to_end); -void lt_update_exe_path (const char *name, const char *value); -void lt_update_lib_path (const char *name, const char *value); -char **prepare_spawn (char **argv); -void lt_dump_script (FILE *f); -EOF - - cat <= 0) - && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) - return 1; - else - return 0; -} - -int -make_executable (const char *path) -{ - int rval = 0; - struct stat st; - - lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", - nonempty (path)); - if ((!path) || (!*path)) - return 0; - - if (stat (path, &st) >= 0) - { - rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); - } - return rval; -} - -/* Searches for the full path of the wrapper. Returns - newly allocated full path name if found, NULL otherwise - Does not chase symlinks, even on platforms that support them. -*/ -char * -find_executable (const char *wrapper) -{ - int has_slash = 0; - const char *p; - const char *p_next; - /* static buffer for getcwd */ - char tmp[LT_PATHMAX + 1]; - size_t tmp_len; - char *concat_name; - - lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", - nonempty (wrapper)); - - if ((wrapper == NULL) || (*wrapper == '\0')) - return NULL; - - /* Absolute path? */ -#if defined HAVE_DOS_BASED_FILE_SYSTEM - if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - else - { -#endif - if (IS_DIR_SEPARATOR (wrapper[0])) - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } -#if defined HAVE_DOS_BASED_FILE_SYSTEM - } -#endif - - for (p = wrapper; *p; p++) - if (*p == '/') - { - has_slash = 1; - break; - } - if (!has_slash) - { - /* no slashes; search PATH */ - const char *path = getenv ("PATH"); - if (path != NULL) - { - for (p = path; *p; p = p_next) - { - const char *q; - size_t p_len; - for (q = p; *q; q++) - if (IS_PATH_SEPARATOR (*q)) - break; - p_len = (size_t) (q - p); - p_next = (*q == '\0' ? q : q + 1); - if (p_len == 0) - { - /* empty path: current directory */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); - tmp_len = strlen (tmp); - concat_name = - XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - } - else - { - concat_name = - XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, p, p_len); - concat_name[p_len] = '/'; - strcpy (concat_name + p_len + 1, wrapper); - } - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - } - /* not found in PATH; assume curdir */ - } - /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", - nonnull (strerror (errno))); - tmp_len = strlen (tmp); - concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - return NULL; -} - -char * -chase_symlinks (const char *pathspec) -{ -#ifndef S_ISLNK - return xstrdup (pathspec); -#else - char buf[LT_PATHMAX]; - struct stat s; - char *tmp_pathspec = xstrdup (pathspec); - char *p; - int has_symlinks = 0; - while (strlen (tmp_pathspec) && !has_symlinks) - { - lt_debugprintf (__FILE__, __LINE__, - "checking path component for symlinks: %s\n", - tmp_pathspec); - if (lstat (tmp_pathspec, &s) == 0) - { - if (S_ISLNK (s.st_mode) != 0) - { - has_symlinks = 1; - break; - } - - /* search backwards for last DIR_SEPARATOR */ - p = tmp_pathspec + strlen (tmp_pathspec) - 1; - while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - p--; - if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - { - /* no more DIR_SEPARATORS left */ - break; - } - *p = '\0'; - } - else - { - lt_fatal (__FILE__, __LINE__, - "error accessing file \"%s\": %s", - tmp_pathspec, nonnull (strerror (errno))); - } - } - XFREE (tmp_pathspec); - - if (!has_symlinks) - { - return xstrdup (pathspec); - } - - tmp_pathspec = realpath (pathspec, buf); - if (tmp_pathspec == 0) - { - lt_fatal (__FILE__, __LINE__, - "could not follow symlinks for %s", pathspec); - } - return xstrdup (tmp_pathspec); -#endif -} - -char * -strendzap (char *str, const char *pat) -{ - size_t len, patlen; - - assert (str != NULL); - assert (pat != NULL); - - len = strlen (str); - patlen = strlen (pat); - - if (patlen <= len) - { - str += len - patlen; - if (STREQ (str, pat)) - *str = '\0'; - } - return str; -} - -void -lt_debugprintf (const char *file, int line, const char *fmt, ...) -{ - va_list args; - if (lt_debug) - { - (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); - va_start (args, fmt); - (void) vfprintf (stderr, fmt, args); - va_end (args); - } -} - -static void -lt_error_core (int exit_status, const char *file, - int line, const char *mode, - const char *message, va_list ap) -{ - fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - - if (exit_status >= 0) - exit (exit_status); -} - -void -lt_fatal (const char *file, int line, const char *message, ...) -{ - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); - va_end (ap); -} - -static const char * -nonnull (const char *s) -{ - return s ? s : "(null)"; -} - -static const char * -nonempty (const char *s) -{ - return (s && !*s) ? "(empty)" : nonnull (s); -} - -void -lt_setenv (const char *name, const char *value) -{ - lt_debugprintf (__FILE__, __LINE__, - "(lt_setenv) setting '%s' to '%s'\n", - nonnull (name), nonnull (value)); - { -#ifdef HAVE_SETENV - /* always make a copy, for consistency with !HAVE_SETENV */ - char *str = xstrdup (value); - setenv (name, str, 1); -#else - size_t len = strlen (name) + 1 + strlen (value) + 1; - char *str = XMALLOC (char, len); - sprintf (str, "%s=%s", name, value); - if (putenv (str) != EXIT_SUCCESS) - { - XFREE (str); - } -#endif - } -} - -char * -lt_extend_str (const char *orig_value, const char *add, int to_end) -{ - char *new_value; - if (orig_value && *orig_value) - { - size_t orig_value_len = strlen (orig_value); - size_t add_len = strlen (add); - new_value = XMALLOC (char, add_len + orig_value_len + 1); - if (to_end) - { - strcpy (new_value, orig_value); - strcpy (new_value + orig_value_len, add); - } - else - { - strcpy (new_value, add); - strcpy (new_value + add_len, orig_value); - } - } - else - { - new_value = xstrdup (add); - } - return new_value; -} - -void -lt_update_exe_path (const char *name, const char *value) -{ - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); - - if (name && *name && value && *value) - { - char *new_value = lt_extend_str (getenv (name), value, 0); - /* some systems can't cope with a ':'-terminated path #' */ - size_t len = strlen (new_value); - while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1])) - { - new_value[--len] = '\0'; - } - lt_setenv (name, new_value); - XFREE (new_value); - } -} - -void -lt_update_lib_path (const char *name, const char *value) -{ - lt_debugprintf (__FILE__, __LINE__, - "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", - nonnull (name), nonnull (value)); - - if (name && *name && value && *value) - { - char *new_value = lt_extend_str (getenv (name), value, 0); - lt_setenv (name, new_value); - XFREE (new_value); - } -} - -EOF - case $host_os in - mingw*) - cat <<"EOF" - -/* Prepares an argument vector before calling spawn(). - Note that spawn() does not by itself call the command interpreter - (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : - ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); - GetVersionEx(&v); - v.dwPlatformId == VER_PLATFORM_WIN32_NT; - }) ? "cmd.exe" : "command.com"). - Instead it simply concatenates the arguments, separated by ' ', and calls - CreateProcess(). We must quote the arguments since Win32 CreateProcess() - interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a - special way: - - Space and tab are interpreted as delimiters. They are not treated as - delimiters if they are surrounded by double quotes: "...". - - Unescaped double quotes are removed from the input. Their only effect is - that within double quotes, space and tab are treated like normal - characters. - - Backslashes not followed by double quotes are not special. - - But 2*n+1 backslashes followed by a double quote become - n backslashes followed by a double quote (n >= 0): - \" -> " - \\\" -> \" - \\\\\" -> \\" - */ -#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" -char ** -prepare_spawn (char **argv) -{ - size_t argc; - char **new_argv; - size_t i; - - /* Count number of arguments. */ - for (argc = 0; argv[argc] != NULL; argc++) - ; - - /* Allocate new argument vector. */ - new_argv = XMALLOC (char *, argc + 1); - - /* Put quoted arguments into the new argument vector. */ - for (i = 0; i < argc; i++) - { - const char *string = argv[i]; - - if (string[0] == '\0') - new_argv[i] = xstrdup ("\"\""); - else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) - { - int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); - size_t length; - unsigned int backslashes; - const char *s; - char *quoted_string; - char *p; - - length = 0; - backslashes = 0; - if (quote_around) - length++; - for (s = string; *s != '\0'; s++) - { - char c = *s; - if (c == '"') - length += backslashes + 1; - length++; - if (c == '\\') - backslashes++; - else - backslashes = 0; - } - if (quote_around) - length += backslashes + 1; - - quoted_string = XMALLOC (char, length + 1); - - p = quoted_string; - backslashes = 0; - if (quote_around) - *p++ = '"'; - for (s = string; *s != '\0'; s++) - { - char c = *s; - if (c == '"') - { - unsigned int j; - for (j = backslashes + 1; j > 0; j--) - *p++ = '\\'; - } - *p++ = c; - if (c == '\\') - backslashes++; - else - backslashes = 0; - } - if (quote_around) - { - unsigned int j; - for (j = backslashes; j > 0; j--) - *p++ = '\\'; - *p++ = '"'; - } - *p = '\0'; - - new_argv[i] = quoted_string; - } - else - new_argv[i] = (char *) string; - } - new_argv[argc] = NULL; - - return new_argv; -} -EOF - ;; - esac - - cat <<"EOF" -void lt_dump_script (FILE* f) -{ -EOF - func_emit_wrapper yes | - $SED -n -e ' -s/^\(.\{79\}\)\(..*\)/\1\ -\2/ -h -s/\([\\"]\)/\\\1/g -s/$/\\n/ -s/\([^\n]*\).*/ fputs ("\1", f);/p -g -D' - cat <<"EOF" -} -EOF -} -# end: func_emit_cwrapperexe_src - -# func_win32_import_lib_p ARG -# True if ARG is an import lib, as indicated by $file_magic_cmd -func_win32_import_lib_p () -{ - $debug_cmd - - case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in - *import*) : ;; - *) false ;; - esac -} - -# func_suncc_cstd_abi -# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!! -# Several compiler flags select an ABI that is incompatible with the -# Cstd library. Avoid specifying it if any are in CXXFLAGS. -func_suncc_cstd_abi () -{ - $debug_cmd - - case " $compile_command " in - *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*) - suncc_use_cstd_abi=no - ;; - *) - suncc_use_cstd_abi=yes - ;; - esac -} - -# func_mode_link arg... -func_mode_link () -{ - $debug_cmd - - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - # It is impossible to link a dll without this setting, and - # we shouldn't force the makefile maintainer to figure out - # what system we are compiling for in order to pass an extra - # flag for every libtool invocation. - # allow_undefined=no - - # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll that has undefined symbols, in which case not - # even a static library is built. For now, we need to specify - # -no-undefined on the libtool link line when we can be certain - # that all symbols are satisfied, otherwise we get a static library. - allow_undefined=yes - ;; - *) - allow_undefined=yes - ;; - esac - libtool_args=$nonopt - base_compile="$nonopt $@" - compile_command=$nonopt - finalize_command=$nonopt - - compile_rpath= - finalize_rpath= - compile_shlibpath= - finalize_shlibpath= - convenience= - old_convenience= - deplibs= - old_deplibs= - compiler_flags= - linker_flags= - dllsearchpath= - lib_search_path=`pwd` - inst_prefix_dir= - new_inherited_linker_flags= - - avoid_version=no - bindir= - dlfiles= - dlprefiles= - dlself=no - export_dynamic=no - export_symbols= - export_symbols_regex= - generated= - libobjs= - ltlibs= - module=no - no_install=no - objs= - os2dllname= - non_pic_objects= - precious_files_regex= - prefer_static_libs=no - preload=false - prev= - prevarg= - release= - rpath= - xrpath= - perm_rpath= - temp_rpath= - thread_safe=no - vinfo= - vinfo_number=no - weak_libs= - single_module=$wl-single_module - func_infer_tag $base_compile - - # We need to know -static, to get the right output filenames. - for arg - do - case $arg in - -shared) - test yes != "$build_libtool_libs" \ - && func_fatal_configuration "cannot build a shared library" - build_old_libs=no - break - ;; - -all-static | -static | -static-libtool-libs) - case $arg in - -all-static) - if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then - func_warning "complete static linking is impossible in this configuration" - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - -static) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=built - ;; - -static-libtool-libs) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - esac - build_libtool_libs=no - build_old_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test "$#" -gt 0; do - arg=$1 - shift - func_quote_for_eval "$arg" - qarg=$func_quote_for_eval_unquoted_result - func_append libtool_args " $func_quote_for_eval_result" - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - output) - func_append compile_command " @OUTPUT@" - func_append finalize_command " @OUTPUT@" - ;; - esac - - case $prev in - bindir) - bindir=$arg - prev= - continue - ;; - dlfiles|dlprefiles) - $preload || { - # Add the symbol object into the linking commands. - func_append compile_command " @SYMFILE@" - func_append finalize_command " @SYMFILE@" - preload=: - } - case $arg in - *.la | *.lo) ;; # We handle these cases below. - force) - if test no = "$dlself"; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test dlprefiles = "$prev"; then - dlself=yes - elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test dlfiles = "$prev"; then - func_append dlfiles " $arg" - else - func_append dlprefiles " $arg" - fi - prev= - continue - ;; - esac - ;; - expsyms) - export_symbols=$arg - test -f "$arg" \ - || func_fatal_error "symbol file '$arg' does not exist" - prev= - continue - ;; - expsyms_regex) - export_symbols_regex=$arg - prev= - continue - ;; - framework) - case $host in - *-*-darwin*) - case "$deplibs " in - *" $qarg.ltframework "*) ;; - *) func_append deplibs " $qarg.ltframework" # this is fixed later - ;; - esac - ;; - esac - prev= - continue - ;; - inst_prefix) - inst_prefix_dir=$arg - prev= - continue - ;; - mllvm) - # Clang does not use LLVM to link, so we can simply discard any - # '-mllvm $arg' options when doing the link step. - prev= - continue - ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat "$save_arg"` - do -# func_append moreargs " $fil" - arg=$fil - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test none = "$pic_object" && - test none = "$non_pic_object"; then - func_fatal_error "cannot find name of object for '$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir=$func_dirname_result - - if test none != "$pic_object"; then - # Prepend the subdirectory the object is found in. - pic_object=$xdir$pic_object - - if test dlfiles = "$prev"; then - if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then - func_append dlfiles " $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test dlprefiles = "$prev"; then - # Preload the old-style object. - func_append dlprefiles " $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg=$pic_object - fi - - # Non-PIC object. - if test none != "$non_pic_object"; then - # Prepend the subdirectory the object is found in. - non_pic_object=$xdir$non_pic_object - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test none = "$pic_object"; then - arg=$non_pic_object - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object=$pic_object - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir=$func_dirname_result - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "'$arg' is not a valid libtool object" - fi - fi - done - else - func_fatal_error "link input file '$arg' does not exist" - fi - arg=$save_arg - prev= - continue - ;; - os2dllname) - os2dllname=$arg - prev= - continue - ;; - precious_regex) - precious_files_regex=$arg - prev= - continue - ;; - release) - release=-$arg - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case $arg in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - if test rpath = "$prev"; then - case "$rpath " in - *" $arg "*) ;; - *) func_append rpath " $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) func_append xrpath " $arg" ;; - esac - fi - prev= - continue - ;; - shrext) - shrext_cmds=$arg - prev= - continue - ;; - weak) - func_append weak_libs " $arg" - prev= - continue - ;; - xcclinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xcompiler) - func_append compiler_flags " $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xlinker) - func_append linker_flags " $qarg" - func_append compiler_flags " $wl$qarg" - prev= - func_append compile_command " $wl$qarg" - func_append finalize_command " $wl$qarg" - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi # test -n "$prev" - - prevarg=$arg - - case $arg in - -all-static) - if test -n "$link_static_flag"; then - # See comment for -static flag below, for more details. - func_append compile_command " $link_static_flag" - func_append finalize_command " $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - func_fatal_error "'-allow-undefined' must not be used because it is the default" - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -bindir) - prev=bindir - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - export_dynamic=yes - continue - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - func_fatal_error "more than one -exported-symbols argument is not allowed" - fi - if test X-export-symbols = "X$arg"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - -framework) - prev=framework - continue - ;; - - -inst-prefix-dir) - prev=inst_prefix - continue - ;; - - # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* - # so, if we see these flags be careful not to treat them like -L - -L[A-Z][A-Z]*:*) - case $with_gcc/$host in - no/*-*-irix* | /*-*-irix*) - func_append compile_command " $arg" - func_append finalize_command " $arg" - ;; - esac - continue - ;; - - -L*) - func_stripname "-L" '' "$arg" - if test -z "$func_stripname_result"; then - if test "$#" -gt 0; then - func_fatal_error "require no space between '-L' and '$1'" - else - func_fatal_error "need path for '-L' option" - fi - fi - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - test -z "$absdir" && \ - func_fatal_error "cannot determine absolute directory name of '$dir'" - dir=$absdir - ;; - esac - case "$deplibs " in - *" -L$dir "* | *" $arg "*) - # Will only happen for absolute or sysroot arguments - ;; - *) - # Preserve sysroot, but never include relative directories - case $dir in - [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; - *) func_append deplibs " -L$dir" ;; - esac - func_append lib_search_path " $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$dir:"*) ;; - ::) dllsearchpath=$dir;; - *) func_append dllsearchpath ":$dir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; - esac - ;; - esac - continue - ;; - - -l*) - if test X-lc = "X$arg" || test X-lm = "X$arg"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) - # These systems don't actually have a C or math library (as such) - continue - ;; - *-*-os2*) - # These systems don't actually have a C library (as such) - test X-lc = "X$arg" && continue - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) - # Do not include libc due to us having libc/libc_r. - test X-lc = "X$arg" && continue - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - func_append deplibs " System.ltframework" - continue - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - test X-lc = "X$arg" && continue - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - test X-lc = "X$arg" && continue - ;; - esac - elif test X-lc_r = "X$arg"; then - case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi - func_append deplibs " $arg" - continue - ;; - - -mllvm) - prev=mllvm - continue - ;; - - -module) - module=yes - continue - ;; - - # Tru64 UNIX uses -model [arg] to determine the layout of C++ - # classes, name mangling, and exception handling. - # Darwin uses the -arch flag to determine output architecture. - -model|-arch|-isysroot|--sysroot) - func_append compiler_flags " $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - prev=xcompiler - continue - ;; - - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ - |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) - func_append compiler_flags " $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - case "$new_inherited_linker_flags " in - *" $arg "*) ;; - * ) func_append new_inherited_linker_flags " $arg" ;; - esac - continue - ;; - - -multi_module) - single_module=$wl-multi_module - continue - ;; - - -no-fast-install) - fast_install=no - continue - ;; - - -no-install) - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) - # The PATH hackery in wrapper scripts is required on Windows - # and Darwin in order for the loader to find any dlls it needs. - func_warning "'-no-install' is ignored for $host" - func_warning "assuming '-no-fast-install' instead" - fast_install=no - ;; - *) no_install=yes ;; - esac - continue - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -objectlist) - prev=objectlist - continue - ;; - - -os2dllname) - prev=os2dllname - continue - ;; - - -o) prev=output ;; - - -precious-files-regex) - prev=precious_regex - continue - ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - func_stripname '-R' '' "$arg" - dir=$func_stripname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - =*) - func_stripname '=' '' "$dir" - dir=$lt_sysroot$func_stripname_result - ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) func_append xrpath " $dir" ;; - esac - continue - ;; - - -shared) - # The effects of -shared are defined in a previous loop. - continue - ;; - - -shrext) - prev=shrext - continue - ;; - - -static | -static-libtool-libs) - # The effects of -static are defined in a previous loop. - # We used to do the same as -all-static on platforms that - # didn't have a PIC flag, but the assumption that the effects - # would be equivalent was wrong. It would break on at least - # Digital Unix and AIX. - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - -version-number) - prev=vinfo - vinfo_number=yes - continue - ;; - - -weak) - prev=weak - continue - ;; - - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs=$IFS; IFS=, - for flag in $args; do - IFS=$save_ifs - func_quote_for_eval "$flag" - func_append arg " $func_quote_for_eval_result" - func_append compiler_flags " $func_quote_for_eval_result" - done - IFS=$save_ifs - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Wl,*) - func_stripname '-Wl,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs=$IFS; IFS=, - for flag in $args; do - IFS=$save_ifs - func_quote_for_eval "$flag" - func_append arg " $wl$func_quote_for_eval_result" - func_append compiler_flags " $wl$func_quote_for_eval_result" - func_append linker_flags " $func_quote_for_eval_result" - done - IFS=$save_ifs - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Xlinker) - prev=xlinker - continue - ;; - - -XCClinker) - prev=xcclinker - continue - ;; - - # -msg_* for osf cc - -msg_*) - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - ;; - - # Flags to be passed through unchanged, with rationale: - # -64, -mips[0-9] enable 64-bit mode for the SGI compiler - # -r[0-9][0-9]* specify processor for the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler - # +DA*, +DD* enable 64-bit mode for the HP compiler - # -q* compiler args for the IBM compiler - # -m*, -t[45]*, -txscale* architecture-specific flags for GCC - # -F/path path to uninstalled frameworks, gcc on darwin - # -p, -pg, --coverage, -fprofile-* profiling flags for GCC - # -fstack-protector* stack protector flags for GCC - # @file GCC response files - # -tp=* Portland pgcc target processor selection - # --sysroot=* for sysroot support - # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization - # -stdlib=* select c++ std lib with clang - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ - -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*) - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - func_append compile_command " $arg" - func_append finalize_command " $arg" - func_append compiler_flags " $arg" - continue - ;; - - -Z*) - if test os2 = "`expr $host : '.*\(os2\)'`"; then - # OS/2 uses -Zxxx to specify OS/2-specific options - compiler_flags="$compiler_flags $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - case $arg in - -Zlinker | -Zstack) - prev=xcompiler - ;; - esac - continue - else - # Otherwise treat like 'Some other compiler flag' below - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - fi - ;; - - # Some other compiler flag. - -* | +*) - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - ;; - - *.$objext) - # A standard object. - func_append objs " $arg" - ;; - - *.lo) - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test none = "$pic_object" && - test none = "$non_pic_object"; then - func_fatal_error "cannot find name of object for '$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir=$func_dirname_result - - test none = "$pic_object" || { - # Prepend the subdirectory the object is found in. - pic_object=$xdir$pic_object - - if test dlfiles = "$prev"; then - if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then - func_append dlfiles " $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test dlprefiles = "$prev"; then - # Preload the old-style object. - func_append dlprefiles " $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg=$pic_object - } - - # Non-PIC object. - if test none != "$non_pic_object"; then - # Prepend the subdirectory the object is found in. - non_pic_object=$xdir$non_pic_object - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test none = "$pic_object"; then - arg=$non_pic_object - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object=$pic_object - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir=$func_dirname_result - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "'$arg' is not a valid libtool object" - fi - fi - ;; - - *.$libext) - # An archive. - func_append deplibs " $arg" - func_append old_deplibs " $arg" - continue - ;; - - *.la) - # A libtool-controlled library. - - func_resolve_sysroot "$arg" - if test dlfiles = "$prev"; then - # This library was specified with -dlopen. - func_append dlfiles " $func_resolve_sysroot_result" - prev= - elif test dlprefiles = "$prev"; then - # The library was specified with -dlpreopen. - func_append dlprefiles " $func_resolve_sysroot_result" - prev= - else - func_append deplibs " $func_resolve_sysroot_result" - fi - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result - ;; - esac # arg - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - done # argument parsing loop - - test -n "$prev" && \ - func_fatal_help "the '$prevarg' option requires an argument" - - if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - - oldlibs= - # calculate the name of the file, without its directory - func_basename "$output" - outputname=$func_basename_result - libobjs_save=$libobjs - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\` - else - shlib_search_path= - fi - eval sys_lib_search_path=\"$sys_lib_search_path_spec\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - - # Definition is injected by LT_CONFIG during libtool generation. - func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH" - - func_dirname "$output" "/" "" - output_objdir=$func_dirname_result$objdir - func_to_tool_file "$output_objdir/" - tool_output_objdir=$func_to_tool_file_result - # Create the object directory. - func_mkdir_p "$output_objdir" - - # Determine the type of output - case $output in - "") - func_fatal_help "you must specify an output file" - ;; - *.$libext) linkmode=oldlib ;; - *.lo | *.$objext) linkmode=obj ;; - *.la) linkmode=lib ;; - *) linkmode=prog ;; # Anything else should be a program. - esac - - specialdeplibs= - - libs= - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do - if $opt_preserve_dup_deps; then - case "$libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append libs " $deplib" - done - - if test lib = "$linkmode"; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" - - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - if $opt_duplicate_compiler_generated_deps; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; - esac - func_append pre_post_deps " $pre_post_dep" - done - fi - pre_post_deps= - fi - - deplibs= - newdependency_libs= - newlib_search_path= - need_relink=no # whether we're linking any uninstalled libtool libraries - notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries - - case $linkmode in - lib) - passes="conv dlpreopen link" - for file in $dlfiles $dlprefiles; do - case $file in - *.la) ;; - *) - func_fatal_help "libraries can '-dlopen' only libtool libraries: $file" - ;; - esac - done - ;; - prog) - compile_deplibs= - finalize_deplibs= - alldeplibs=false - newdlfiles= - newdlprefiles= - passes="conv scan dlopen dlpreopen link" - ;; - *) passes="conv" - ;; - esac - - for pass in $passes; do - # The preopen pass in lib mode reverses $deplibs; put it back here - # so that -L comes before libs that need it for instance... - if test lib,link = "$linkmode,$pass"; then - ## FIXME: Find the place where the list is rebuilt in the wrong - ## order, and fix it there properly - tmp_deplibs= - for deplib in $deplibs; do - tmp_deplibs="$deplib $tmp_deplibs" - done - deplibs=$tmp_deplibs - fi - - if test lib,link = "$linkmode,$pass" || - test prog,scan = "$linkmode,$pass"; then - libs=$deplibs - deplibs= - fi - if test prog = "$linkmode"; then - case $pass in - dlopen) libs=$dlfiles ;; - dlpreopen) libs=$dlprefiles ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; - esac - fi - if test lib,dlpreopen = "$linkmode,$pass"; then - # Collect and forward deplibs of preopened libtool libs - for lib in $dlprefiles; do - # Ignore non-libtool-libs - dependency_libs= - func_resolve_sysroot "$lib" - case $lib in - *.la) func_source "$func_resolve_sysroot_result" ;; - esac - - # Collect preopened libtool deplibs, except any this library - # has declared as weak libs - for deplib in $dependency_libs; do - func_basename "$deplib" - deplib_base=$func_basename_result - case " $weak_libs " in - *" $deplib_base "*) ;; - *) func_append deplibs " $deplib" ;; - esac - done - done - libs=$dlprefiles - fi - if test dlopen = "$pass"; then - # Collect dlpreopened libraries - save_deplibs=$deplibs - deplibs= - fi - - for deplib in $libs; do - lib= - found=false - case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ - |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) - if test prog,link = "$linkmode,$pass"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - func_append compiler_flags " $deplib" - if test lib = "$linkmode"; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; - esac - fi - fi - continue - ;; - -l*) - if test lib != "$linkmode" && test prog != "$linkmode"; then - func_warning "'-l' is ignored for archives/objects" - continue - fi - func_stripname '-l' '' "$deplib" - name=$func_stripname_result - if test lib = "$linkmode"; then - searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" - else - searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" - fi - for searchdir in $searchdirs; do - for search_ext in .la $std_shrext .so .a; do - # Search the libtool library - lib=$searchdir/lib$name$search_ext - if test -f "$lib"; then - if test .la = "$search_ext"; then - found=: - else - found=false - fi - break 2 - fi - done - done - if $found; then - # deplib is a libtool library - # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, - # We need to do some special things here, and not later. - if test yes = "$allow_libtool_libs_with_static_runtimes"; then - case " $predeps $postdeps " in - *" $deplib "*) - if func_lalib_p "$lib"; then - library_names= - old_library= - func_source "$lib" - for l in $old_library $library_names; do - ll=$l - done - if test "X$ll" = "X$old_library"; then # only static version available - found=false - func_dirname "$lib" "" "." - ladir=$func_dirname_result - lib=$ladir/$old_library - if test prog,link = "$linkmode,$pass"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - fi - ;; - *) ;; - esac - fi - else - # deplib doesn't seem to be a libtool library - if test prog,link = "$linkmode,$pass"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - ;; # -l - *.ltframework) - if test prog,link = "$linkmode,$pass"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - if test lib = "$linkmode"; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) func_append new_inherited_linker_flags " $deplib" ;; - esac - fi - fi - continue - ;; - -L*) - case $linkmode in - lib) - deplibs="$deplib $deplibs" - test conv = "$pass" && continue - newdependency_libs="$deplib $newdependency_libs" - func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - prog) - if test conv = "$pass"; then - deplibs="$deplib $deplibs" - continue - fi - if test scan = "$pass"; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - *) - func_warning "'-L' is ignored for archives/objects" - ;; - esac # linkmode - continue - ;; # -L - -R*) - if test link = "$pass"; then - func_stripname '-R' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - dir=$func_resolve_sysroot_result - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; - *) func_append xrpath " $dir" ;; - esac - fi - deplibs="$deplib $deplibs" - continue - ;; - *.la) - func_resolve_sysroot "$deplib" - lib=$func_resolve_sysroot_result - ;; - *.$libext) - if test conv = "$pass"; then - deplibs="$deplib $deplibs" - continue - fi - case $linkmode in - lib) - # Linking convenience modules into shared libraries is allowed, - # but linking other static libraries is non-portable. - case " $dlpreconveniencelibs " in - *" $deplib "*) ;; - *) - valid_a_lib=false - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=: - fi - ;; - pass_all) - valid_a_lib=: - ;; - esac - if $valid_a_lib; then - echo - $ECHO "*** Warning: Linking the shared library $output against the" - $ECHO "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - else - echo - $ECHO "*** Warning: Trying to link with static lib archive $deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because the file extensions .$libext of this argument makes me believe" - echo "*** that it is just a static archive that I should not use here." - fi - ;; - esac - continue - ;; - prog) - if test link != "$pass"; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - continue - ;; - esac # linkmode - ;; # *.$libext - *.lo | *.$objext) - if test conv = "$pass"; then - deplibs="$deplib $deplibs" - elif test prog = "$linkmode"; then - if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - func_append newdlprefiles " $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - func_append newdlfiles " $deplib" - fi - fi - continue - ;; - %DEPLIBS%) - alldeplibs=: - continue - ;; - esac # case $deplib - - $found || test -f "$lib" \ - || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'" - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$lib" \ - || func_fatal_error "'$lib' is not a valid libtool archive" - - func_dirname "$lib" "" "." - ladir=$func_dirname_result - - dlname= - dlopen= - dlpreopen= - libdir= - library_names= - old_library= - inherited_linker_flags= - # If the library was installed with an old release of libtool, - # it will not redefine variables installed, or shouldnotlink - installed=yes - shouldnotlink=no - avoidtemprpath= - - - # Read the .la file - func_source "$lib" - - # Convert "-framework foo" to "foo.ltframework" - if test -n "$inherited_linker_flags"; then - tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` - for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do - case " $new_inherited_linker_flags " in - *" $tmp_inherited_linker_flag "*) ;; - *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; - esac - done - fi - dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - if test lib,link = "$linkmode,$pass" || - test prog,scan = "$linkmode,$pass" || - { test prog != "$linkmode" && test lib != "$linkmode"; }; then - test -n "$dlopen" && func_append dlfiles " $dlopen" - test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" - fi - - if test conv = "$pass"; then - # Only check for convenience libraries - deplibs="$lib $deplibs" - if test -z "$libdir"; then - if test -z "$old_library"; then - func_fatal_error "cannot find name of link library for '$lib'" - fi - # It is a libtool convenience library, so add in its objects. - func_append convenience " $ladir/$objdir/$old_library" - func_append old_convenience " $ladir/$objdir/$old_library" - elif test prog != "$linkmode" && test lib != "$linkmode"; then - func_fatal_error "'$lib' is not a convenience library" - fi - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if $opt_preserve_dup_deps; then - case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append tmp_libs " $deplib" - done - continue - fi # $pass = conv - - - # Get the name of the library we link against. - linklib= - if test -n "$old_library" && - { test yes = "$prefer_static_libs" || - test built,no = "$prefer_static_libs,$installed"; }; then - linklib=$old_library - else - for l in $old_library $library_names; do - linklib=$l - done - fi - if test -z "$linklib"; then - func_fatal_error "cannot find name of link library for '$lib'" - fi - - # This library was specified with -dlopen. - if test dlopen = "$pass"; then - test -z "$libdir" \ - && func_fatal_error "cannot -dlopen a convenience library: '$lib'" - if test -z "$dlname" || - test yes != "$dlopen_support" || - test no = "$build_libtool_libs" - then - # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - func_append dlprefiles " $lib $dependency_libs" - else - func_append newdlfiles " $lib" - fi - continue - fi # $pass = dlopen - - # We need an absolute path. - case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;; - *) - abs_ladir=`cd "$ladir" && pwd` - if test -z "$abs_ladir"; then - func_warning "cannot determine absolute directory name of '$ladir'" - func_warning "passing it literally to the linker, although it might fail" - abs_ladir=$ladir - fi - ;; - esac - func_basename "$lib" - laname=$func_basename_result - - # Find the relevant object directory and library name. - if test yes = "$installed"; then - if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - func_warning "library '$lib' was moved." - dir=$ladir - absdir=$abs_ladir - libdir=$abs_ladir - else - dir=$lt_sysroot$libdir - absdir=$lt_sysroot$libdir - fi - test yes = "$hardcode_automatic" && avoidtemprpath=yes - else - if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir=$ladir - absdir=$abs_ladir - # Remove this search path later - func_append notinst_path " $abs_ladir" - else - dir=$ladir/$objdir - absdir=$abs_ladir/$objdir - # Remove this search path later - func_append notinst_path " $abs_ladir" - fi - fi # $installed = yes - func_stripname 'lib' '.la' "$laname" - name=$func_stripname_result - - # This library was specified with -dlpreopen. - if test dlpreopen = "$pass"; then - if test -z "$libdir" && test prog = "$linkmode"; then - func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'" - fi - case $host in - # special handling for platforms with PE-DLLs. - *cygwin* | *mingw* | *cegcc* ) - # Linker will automatically link against shared library if both - # static and shared are present. Therefore, ensure we extract - # symbols from the import library if a shared library is present - # (otherwise, the dlopen module name will be incorrect). We do - # this by putting the import library name into $newdlprefiles. - # We recover the dlopen module name by 'saving' the la file - # name in a special purpose variable, and (later) extracting the - # dlname from the la file. - if test -n "$dlname"; then - func_tr_sh "$dir/$linklib" - eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" - func_append newdlprefiles " $dir/$linklib" - else - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - fi - ;; - * ) - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - func_append newdlprefiles " $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - func_append dlpreconveniencelibs " $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - func_append newdlprefiles " $dir/$dlname" - else - func_append newdlprefiles " $dir/$linklib" - fi - ;; - esac - fi # $pass = dlpreopen - - if test -z "$libdir"; then - # Link the convenience library - if test lib = "$linkmode"; then - deplibs="$dir/$old_library $deplibs" - elif test prog,link = "$linkmode,$pass"; then - compile_deplibs="$dir/$old_library $compile_deplibs" - finalize_deplibs="$dir/$old_library $finalize_deplibs" - else - deplibs="$lib $deplibs" # used for prog,scan pass - fi - continue - fi - - - if test prog = "$linkmode" && test link != "$pass"; then - func_append newlib_search_path " $ladir" - deplibs="$lib $deplibs" - - linkalldeplibs=false - if test no != "$link_all_deplibs" || test -z "$library_names" || - test no = "$build_libtool_libs"; then - linkalldeplibs=: - fi - - tmp_libs= - for deplib in $dependency_libs; do - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result" - func_append newlib_search_path " $func_resolve_sysroot_result" - ;; - esac - # Need to link against all dependency_libs? - if $linkalldeplibs; then - deplibs="$deplib $deplibs" - else - # Need to hardcode shared library paths - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi - if $opt_preserve_dup_deps; then - case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append tmp_libs " $deplib" - done # for deplib - continue - fi # $linkmode = prog... - - if test prog,link = "$linkmode,$pass"; then - if test -n "$library_names" && - { { test no = "$prefer_static_libs" || - test built,yes = "$prefer_static_libs,$installed"; } || - test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then - # Make sure the rpath contains only unique directories. - case $temp_rpath: in - *"$absdir:"*) ;; - *) func_append temp_rpath "$absdir:" ;; - esac - fi - - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - ;; - esac - fi # $linkmode,$pass = prog,link... - - if $alldeplibs && - { test pass_all = "$deplibs_check_method" || - { test yes = "$build_libtool_libs" && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - fi - - link_static=no # Whether the deplib will be linked statically - use_static_libs=$prefer_static_libs - if test built = "$use_static_libs" && test yes = "$installed"; then - use_static_libs=no - fi - if test -n "$library_names" && - { test no = "$use_static_libs" || test -z "$old_library"; }; then - case $host in - *cygwin* | *mingw* | *cegcc* | *os2*) - # No point in relinking DLLs because paths are not encoded - func_append notinst_deplibs " $lib" - need_relink=no - ;; - *) - if test no = "$installed"; then - func_append notinst_deplibs " $lib" - need_relink=yes - fi - ;; - esac - # This is a shared library - - # Warn about portability, can't link against -module's on some - # systems (darwin). Don't bleat about dlopened modules though! - dlopenmodule= - for dlpremoduletest in $dlprefiles; do - if test "X$dlpremoduletest" = "X$lib"; then - dlopenmodule=$dlpremoduletest - break - fi - done - if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then - echo - if test prog = "$linkmode"; then - $ECHO "*** Warning: Linking the executable $output against the loadable module" - else - $ECHO "*** Warning: Linking the shared library $output against the loadable module" - fi - $ECHO "*** $linklib is not portable!" - fi - if test lib = "$linkmode" && - test yes = "$hardcode_into_libs"; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) func_append compile_rpath " $absdir" ;; - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - ;; - esac - fi - - if test -n "$old_archive_from_expsyms_cmds"; then - # figure out the soname - set dummy $library_names - shift - realname=$1 - shift - libname=`eval "\\$ECHO \"$libname_spec\""` - # use dlname if we got it. it's perfectly good, no? - if test -n "$dlname"; then - soname=$dlname - elif test -n "$soname_spec"; then - # bleh windows - case $host in - *cygwin* | mingw* | *cegcc* | *os2*) - func_arith $current - $age - major=$func_arith_result - versuffix=-$major - ;; - esac - eval soname=\"$soname_spec\" - else - soname=$realname - fi - - # Make a new name for the extract_expsyms_cmds to use - soroot=$soname - func_basename "$soroot" - soname=$func_basename_result - func_stripname 'lib' '.dll' "$soname" - newlib=libimp-$func_stripname_result.a - - # If the library has no export list, then create one now - if test -f "$output_objdir/$soname-def"; then : - else - func_verbose "extracting exported symbol list from '$soname'" - func_execute_cmds "$extract_expsyms_cmds" 'exit $?' - fi - - # Create $newlib - if test -f "$output_objdir/$newlib"; then :; else - func_verbose "generating import library for '$soname'" - func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' - fi - # make sure the library variables are pointing to the new library - dir=$output_objdir - linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" - - if test prog = "$linkmode" || test relink != "$opt_mode"; then - add_shlibpath= - add_dir= - add= - lib_linked=yes - case $hardcode_action in - immediate | unsupported) - if test no = "$hardcode_direct"; then - add=$dir/$linklib - case $host in - *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;; - *-*-sysv4*uw2*) add_dir=-L$dir ;; - *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ - *-*-unixware7*) add_dir=-L$dir ;; - *-*-darwin* ) - # if the lib is a (non-dlopened) module then we cannot - # link against it, someone is ignoring the earlier warnings - if /usr/bin/file -L $add 2> /dev/null | - $GREP ": [^:]* bundle" >/dev/null; then - if test "X$dlopenmodule" != "X$lib"; then - $ECHO "*** Warning: lib $linklib is a module, not a shared library" - if test -z "$old_library"; then - echo - echo "*** And there doesn't seem to be a static archive available" - echo "*** The link will probably fail, sorry" - else - add=$dir/$old_library - fi - elif test -n "$old_library"; then - add=$dir/$old_library - fi - fi - esac - elif test no = "$hardcode_minus_L"; then - case $host in - *-*-sunos*) add_shlibpath=$dir ;; - esac - add_dir=-L$dir - add=-l$name - elif test no = "$hardcode_shlibpath_var"; then - add_shlibpath=$dir - add=-l$name - else - lib_linked=no - fi - ;; - relink) - if test yes = "$hardcode_direct" && - test no = "$hardcode_direct_absolute"; then - add=$dir/$linklib - elif test yes = "$hardcode_minus_L"; then - add_dir=-L$absdir - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" - ;; - esac - fi - add=-l$name - elif test yes = "$hardcode_shlibpath_var"; then - add_shlibpath=$dir - add=-l$name - else - lib_linked=no - fi - ;; - *) lib_linked=no ;; - esac - - if test yes != "$lib_linked"; then - func_fatal_configuration "unsupported hardcode properties" - fi - - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; - *) func_append compile_shlibpath "$add_shlibpath:" ;; - esac - fi - if test prog = "$linkmode"; then - test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" - test -n "$add" && compile_deplibs="$add $compile_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - if test yes != "$hardcode_direct" && - test yes != "$hardcode_minus_L" && - test yes = "$hardcode_shlibpath_var"; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; - esac - fi - fi - fi - - if test prog = "$linkmode" || test relink = "$opt_mode"; then - add_shlibpath= - add_dir= - add= - # Finalize command for both is simple: just hardcode it. - if test yes = "$hardcode_direct" && - test no = "$hardcode_direct_absolute"; then - add=$libdir/$linklib - elif test yes = "$hardcode_minus_L"; then - add_dir=-L$libdir - add=-l$name - elif test yes = "$hardcode_shlibpath_var"; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; - esac - add=-l$name - elif test yes = "$hardcode_automatic"; then - if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib"; then - add=$inst_prefix_dir$libdir/$linklib - else - add=$libdir/$linklib - fi - else - # We cannot seem to hardcode it, guess we'll fake it. - add_dir=-L$libdir - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - func_append add_dir " -L$inst_prefix_dir$libdir" - ;; - esac - fi - add=-l$name - fi - - if test prog = "$linkmode"; then - test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" - test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - fi - fi - elif test prog = "$linkmode"; then - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test unsupported != "$hardcode_direct"; then - test -n "$old_library" && linklib=$old_library - compile_deplibs="$dir/$linklib $compile_deplibs" - finalize_deplibs="$dir/$linklib $finalize_deplibs" - else - compile_deplibs="-l$name -L$dir $compile_deplibs" - finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi - elif test yes = "$build_libtool_libs"; then - # Not a shared library - if test pass_all != "$deplibs_check_method"; then - # We're trying link a shared library against a static one - # but the system doesn't support it. - - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. - echo - $ECHO "*** Warning: This system cannot link to static lib archive $lib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - if test yes = "$module"; then - echo "*** But as you try to build a module library, libtool will still create " - echo "*** a static module, that should work as long as the dlopening application" - echo "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using 'nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** 'nm' from GNU binutils and a full rebuild may help." - fi - if test no = "$build_old_libs"; then - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - else - deplibs="$dir/$old_library $deplibs" - link_static=yes - fi - fi # link shared/static library? - - if test lib = "$linkmode"; then - if test -n "$dependency_libs" && - { test yes != "$hardcode_into_libs" || - test yes = "$build_old_libs" || - test yes = "$link_static"; }; then - # Extract -R from dependency_libs - temp_deplibs= - for libdir in $dependency_libs; do - case $libdir in - -R*) func_stripname '-R' '' "$libdir" - temp_xrpath=$func_stripname_result - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) func_append xrpath " $temp_xrpath";; - esac;; - *) func_append temp_deplibs " $libdir";; - esac - done - dependency_libs=$temp_deplibs - fi - - func_append newlib_search_path " $absdir" - # Link against this library - test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - func_resolve_sysroot "$func_stripname_result";; - *) func_resolve_sysroot "$deplib" ;; - esac - if $opt_preserve_dup_deps; then - case "$tmp_libs " in - *" $func_resolve_sysroot_result "*) - func_append specialdeplibs " $func_resolve_sysroot_result" ;; - esac - fi - func_append tmp_libs " $func_resolve_sysroot_result" - done - - if test no != "$link_all_deplibs"; then - # Add the search paths of all dependency libraries - for deplib in $dependency_libs; do - path= - case $deplib in - -L*) path=$deplib ;; - *.la) - func_resolve_sysroot "$deplib" - deplib=$func_resolve_sysroot_result - func_dirname "$deplib" "" "." - dir=$func_dirname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - func_warning "cannot determine absolute directory name of '$dir'" - absdir=$dir - fi - ;; - esac - if $GREP "^installed=no" $deplib > /dev/null; then - case $host in - *-*-darwin*) - depdepl= - eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names"; then - for tmp in $deplibrary_names; do - depdepl=$tmp - done - if test -f "$absdir/$objdir/$depdepl"; then - depdepl=$absdir/$objdir/$depdepl - darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - if test -z "$darwin_install_name"; then - darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - fi - func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl" - func_append linker_flags " -dylib_file $darwin_install_name:$depdepl" - path= - fi - fi - ;; - *) - path=-L$absdir/$objdir - ;; - esac - else - eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - test -z "$libdir" && \ - func_fatal_error "'$deplib' is not a valid libtool archive" - test "$absdir" != "$libdir" && \ - func_warning "'$deplib' seems to be moved" - - path=-L$absdir - fi - ;; - esac - case " $deplibs " in - *" $path "*) ;; - *) deplibs="$path $deplibs" ;; - esac - done - fi # link_all_deplibs != no - fi # linkmode = lib - done # for deplib in $libs - if test link = "$pass"; then - if test prog = "$linkmode"; then - compile_deplibs="$new_inherited_linker_flags $compile_deplibs" - finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" - else - compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - fi - fi - dependency_libs=$newdependency_libs - if test dlpreopen = "$pass"; then - # Link the dlpreopened libraries before other libraries - for deplib in $save_deplibs; do - deplibs="$deplib $deplibs" - done - fi - if test dlopen != "$pass"; then - test conv = "$pass" || { - # Make sure lib_search_path contains only unique directories. - lib_search_path= - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; - *) func_append lib_search_path " $dir" ;; - esac - done - newlib_search_path= - } - - if test prog,link = "$linkmode,$pass"; then - vars="compile_deplibs finalize_deplibs" - else - vars=deplibs - fi - for var in $vars dependency_libs; do - # Add libraries to $var in reverse order - eval tmp_libs=\"\$$var\" - new_libs= - for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - -R*) ;; - *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac - done - tmp_libs= - for deplib in $new_libs; do - case $deplib in - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; - *) func_append tmp_libs " $deplib" ;; - esac - ;; - *) func_append tmp_libs " $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" - done # for var - fi - - # Add Sun CC postdeps if required: - test CXX = "$tagname" && { - case $host_os in - linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C++ 5.9 - func_suncc_cstd_abi - - if test no != "$suncc_use_cstd_abi"; then - func_append postdeps ' -library=Cstd -library=Crun' - fi - ;; - esac - ;; - - solaris*) - func_cc_basename "$CC" - case $func_cc_basename_result in - CC* | sunCC*) - func_suncc_cstd_abi - - if test no != "$suncc_use_cstd_abi"; then - func_append postdeps ' -library=Cstd -library=Crun' - fi - ;; - esac - ;; - esac - } - - # Last step: remove runtime libs from dependency_libs - # (they stay in deplibs) - tmp_libs= - for i in $dependency_libs; do - case " $predeps $postdeps $compiler_lib_search_path " in - *" $i "*) - i= - ;; - esac - if test -n "$i"; then - func_append tmp_libs " $i" - fi - done - dependency_libs=$tmp_libs - done # for pass - if test prog = "$linkmode"; then - dlfiles=$newdlfiles - fi - if test prog = "$linkmode" || test lib = "$linkmode"; then - dlprefiles=$newdlprefiles - fi - - case $linkmode in - oldlib) - if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then - func_warning "'-dlopen' is ignored for archives" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "'-l' and '-L' are ignored for archives" ;; - esac - - test -n "$rpath" && \ - func_warning "'-rpath' is ignored for archives" - - test -n "$xrpath" && \ - func_warning "'-R' is ignored for archives" - - test -n "$vinfo" && \ - func_warning "'-version-info/-version-number' is ignored for archives" - - test -n "$release" && \ - func_warning "'-release' is ignored for archives" - - test -n "$export_symbols$export_symbols_regex" && \ - func_warning "'-export-symbols' is ignored for archives" - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs=$output - func_append objs "$old_deplibs" - ;; - - lib) - # Make sure we only generate libraries of the form 'libNAME.la'. - case $outputname in - lib*) - func_stripname 'lib' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - ;; - *) - test no = "$module" \ - && func_fatal_help "libtool library '$output' must begin with 'lib'" - - if test no != "$need_lib_prefix"; then - # Add the "lib" prefix for modules if required - func_stripname '' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - else - func_stripname '' '.la' "$outputname" - libname=$func_stripname_result - fi - ;; - esac - - if test -n "$objs"; then - if test pass_all != "$deplibs_check_method"; then - func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs" - else - echo - $ECHO "*** Warning: Linking the shared library $output against the non-libtool" - $ECHO "*** objects $objs is not portable!" - func_append libobjs " $objs" - fi - fi - - test no = "$dlself" \ - || func_warning "'-dlopen self' is ignored for libtool libraries" - - set dummy $rpath - shift - test 1 -lt "$#" \ - && func_warning "ignoring multiple '-rpath's for a libtool library" - - install_libdir=$1 - - oldlibs= - if test -z "$rpath"; then - if test yes = "$build_libtool_libs"; then - # Building a libtool convenience library. - # Some compilers have problems with a '.al' extension so - # convenience libraries should have the same extension an - # archive normally would. - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - - test -n "$vinfo" && \ - func_warning "'-version-info/-version-number' is ignored for convenience libraries" - - test -n "$release" && \ - func_warning "'-release' is ignored for convenience libraries" - else - - # Parse the version information argument. - save_ifs=$IFS; IFS=: - set dummy $vinfo 0 0 0 - shift - IFS=$save_ifs - - test -n "$7" && \ - func_fatal_help "too many parameters to '-version-info'" - - # convert absolute version numbers to libtool ages - # this retains compatibility with .la files and attempts - # to make the code below a bit more comprehensible - - case $vinfo_number in - yes) - number_major=$1 - number_minor=$2 - number_revision=$3 - # - # There are really only two kinds -- those that - # use the current revision as the major version - # and those that subtract age and use age as - # a minor version. But, then there is irix - # that has an extra 1 added just for fun - # - case $version_type in - # correct linux to gnu/linux during the next big refactor - darwin|freebsd-elf|linux|osf|windows|none) - func_arith $number_major + $number_minor - current=$func_arith_result - age=$number_minor - revision=$number_revision - ;; - freebsd-aout|qnx|sunos) - current=$number_major - revision=$number_minor - age=0 - ;; - irix|nonstopux) - func_arith $number_major + $number_minor - current=$func_arith_result - age=$number_minor - revision=$number_minor - lt_irix_increment=no - ;; - esac - ;; - no) - current=$1 - revision=$2 - age=$3 - ;; - esac - - # Check that each of the things are valid numbers. - case $current in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "CURRENT '$current' must be a nonnegative integer" - func_fatal_error "'$vinfo' is not valid version information" - ;; - esac - - case $revision in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "REVISION '$revision' must be a nonnegative integer" - func_fatal_error "'$vinfo' is not valid version information" - ;; - esac - - case $age in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "AGE '$age' must be a nonnegative integer" - func_fatal_error "'$vinfo' is not valid version information" - ;; - esac - - if test "$age" -gt "$current"; then - func_error "AGE '$age' is greater than the current interface number '$current'" - func_fatal_error "'$vinfo' is not valid version information" - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case $version_type in - none) ;; - - darwin) - # Like Linux, but with the current version available in - # verstring for coding it into the library header - func_arith $current - $age - major=.$func_arith_result - versuffix=$major.$age.$revision - # Darwin ld doesn't like 0 for these options... - func_arith $current + 1 - minor_current=$func_arith_result - xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - # On Darwin other compilers - case $CC in - nagfor*) - verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision" - ;; - *) - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - ;; - esac - ;; - - freebsd-aout) - major=.$current - versuffix=.$current.$revision - ;; - - freebsd-elf) - func_arith $current - $age - major=.$func_arith_result - versuffix=$major.$age.$revision - ;; - - irix | nonstopux) - if test no = "$lt_irix_increment"; then - func_arith $current - $age - else - func_arith $current - $age + 1 - fi - major=$func_arith_result - - case $version_type in - nonstopux) verstring_prefix=nonstopux ;; - *) verstring_prefix=sgi ;; - esac - verstring=$verstring_prefix$major.$revision - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test 0 -ne "$loop"; do - func_arith $revision - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring=$verstring_prefix$major.$iface:$verstring - done - - # Before this point, $major must not contain '.'. - major=.$major - versuffix=$major.$revision - ;; - - linux) # correct to gnu/linux during the next big refactor - func_arith $current - $age - major=.$func_arith_result - versuffix=$major.$age.$revision - ;; - - osf) - func_arith $current - $age - major=.$func_arith_result - versuffix=.$current.$age.$revision - verstring=$current.$age.$revision - - # Add in all the interfaces that we are compatible with. - loop=$age - while test 0 -ne "$loop"; do - func_arith $current - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring=$verstring:$iface.0 - done - - # Make executables depend on our current version. - func_append verstring ":$current.0" - ;; - - qnx) - major=.$current - versuffix=.$current - ;; - - sco) - major=.$current - versuffix=.$current - ;; - - sunos) - major=.$current - versuffix=.$current.$revision - ;; - - windows) - # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 file systems. - func_arith $current - $age - major=$func_arith_result - versuffix=-$major - ;; - - *) - func_fatal_configuration "unknown library version type '$version_type'" - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - case $version_type in - darwin) - # we can't check for "0.0" in archive_cmds due to quoting - # problems, so we reset it completely - verstring= - ;; - *) - verstring=0.0 - ;; - esac - if test no = "$need_version"; then - versuffix= - else - versuffix=.0.0 - fi - fi - - # Remove version info from name if versioning should be avoided - if test yes,no = "$avoid_version,$need_version"; then - major= - versuffix= - verstring= - fi - - # Check to see if the archive will have undefined symbols. - if test yes = "$allow_undefined"; then - if test unsupported = "$allow_undefined_flag"; then - if test yes = "$build_old_libs"; then - func_warning "undefined symbols not allowed in $host shared libraries; building static only" - build_libtool_libs=no - else - func_fatal_error "can't build $host shared library unless -no-undefined is specified" - fi - fi - else - # Don't allow undefined symbols. - allow_undefined_flag=$no_undefined_flag - fi - - fi - - func_generate_dlsyms "$libname" "$libname" : - func_append libobjs " $symfileobj" - test " " = "$libobjs" && libobjs= - - if test relink != "$opt_mode"; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`$ECHO "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext | *.gcno) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*) - if test -n "$precious_files_regex"; then - if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then - continue - fi - fi - func_append removelist " $p" - ;; - *) ;; - esac - done - test -n "$removelist" && \ - func_show_eval "${RM}r \$removelist" - fi - - # Now set the variables for building old libraries. - if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then - func_append oldlibs " $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP` - fi - - # Eliminate all temporary directories. - #for path in $notinst_path; do - # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` - # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` - # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` - #done - - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do - func_replace_sysroot "$libdir" - func_append temp_xrpath " -R$func_replace_sysroot_result" - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - done - if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then - dependency_libs="$temp_xrpath $dependency_libs" - fi - fi - - # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles=$dlfiles - dlfiles= - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; - *) func_append dlfiles " $lib" ;; - esac - done - - # Make sure dlprefiles contains only unique files - old_dlprefiles=$dlprefiles - dlprefiles= - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; - *) func_append dlprefiles " $lib" ;; - esac - done - - if test yes = "$build_libtool_libs"; then - if test -n "$rpath"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework - func_append deplibs " System.ltframework" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - ;; - *) - # Add libc to deplibs on all other systems if necessary. - if test yes = "$build_libtool_need_lc"; then - func_append deplibs " -lc" - fi - ;; - esac - fi - - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release= - versuffix= - major= - newdeplibs= - droppeddeps=no - case $deplibs_check_method in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behavior. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $opt_dry_run || $RM conftest.c - cat > conftest.c </dev/null` - $nocaseglob - else - potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` - fi - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null | - $GREP " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib=$potent_lib - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | $SED 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;; - *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | - $SED -e 10q | - $EGREP "$file_magic_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" - a_deplib= - break 2 - fi - done - done - fi - if test -n "$a_deplib"; then - droppeddeps=yes - echo - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib"; then - $ECHO "*** with $libname but no candidates were found. (...for file magic test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a file magic. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - func_append newdeplibs " $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - for a_deplib in $deplibs; do - case $a_deplib in - -l*) - func_stripname -l '' "$a_deplib" - name=$func_stripname_result - if test yes = "$allow_libtool_libs_with_static_runtimes"; then - case " $predeps $postdeps " in - *" $a_deplib "*) - func_append newdeplibs " $a_deplib" - a_deplib= - ;; - esac - fi - if test -n "$a_deplib"; then - libname=`eval "\\$ECHO \"$libname_spec\""` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib=$potent_lib # see symlink-check above in file_magic test - if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ - $EGREP "$match_pattern_regex" > /dev/null; then - func_append newdeplibs " $a_deplib" - a_deplib= - break 2 - fi - done - done - fi - if test -n "$a_deplib"; then - droppeddeps=yes - echo - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib"; then - $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a regex pattern. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - func_append newdeplibs " $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs= - tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` - if test yes = "$allow_libtool_libs_with_static_runtimes"; then - for i in $predeps $postdeps; do - # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"` - done - fi - case $tmp_deplibs in - *[!\ \ ]*) - echo - if test none = "$deplibs_check_method"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." - else - echo "*** Warning: inter-library dependencies are not known to be supported." - fi - echo "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - ;; - esac - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library with the System framework - newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` - ;; - esac - - if test yes = "$droppeddeps"; then - if test yes = "$module"; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" - $ECHO "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using 'nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** 'nm' from GNU binutils and a full rebuild may help." - fi - if test no = "$build_old_libs"; then - oldlibs=$output_objdir/$libname.$libext - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." - - if test no = "$allow_undefined"; then - echo - echo "*** Since this library must not contain undefined symbols," - echo "*** because either the platform does not support them or" - echo "*** it was explicitly requested with -no-undefined," - echo "*** libtool will only create a static version of it." - if test no = "$build_old_libs"; then - oldlibs=$output_objdir/$libname.$libext - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - fi - fi - # Done checking deplibs! - deplibs=$newdeplibs - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - case $host in - *-*-darwin*) - newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $deplibs " in - *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; - esac - ;; - *) func_append new_libs " $deplib" ;; - esac - done - deplibs=$new_libs - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - # Test again, we may have decided not to build it any more - if test yes = "$build_libtool_libs"; then - # Remove $wl instances when linking with ld. - # FIXME: should test the right _cmds variable. - case $archive_cmds in - *\$LD\ *) wl= ;; - esac - if test yes = "$hardcode_into_libs"; then - # Hardcode the library paths - hardcode_libdirs= - dep_rpath= - rpath=$finalize_rpath - test relink = "$opt_mode" || rpath=$compile_rpath$rpath - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - func_replace_sysroot "$libdir" - libdir=$func_replace_sysroot_result - if test -z "$hardcode_libdirs"; then - hardcode_libdirs=$libdir - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - func_append dep_rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir=$hardcode_libdirs - eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" - fi - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - func_append rpath "$dir:" - done - eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" - fi - test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" - fi - - shlibpath=$finalize_shlibpath - test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath - if test -n "$shlibpath"; then - eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" - fi - - # Get the real and link names of the library. - eval shared_ext=\"$shrext_cmds\" - eval library_names=\"$library_names_spec\" - set dummy $library_names - shift - realname=$1 - shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname=$realname - fi - if test -z "$dlname"; then - dlname=$soname - fi - - lib=$output_objdir/$realname - linknames= - for link - do - func_append linknames " $link" - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` - test "X$libobjs" = "X " && libobjs= - - delfiles= - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" - export_symbols=$output_objdir/$libname.uexp - func_append delfiles " $export_symbols" - fi - - orig_export_symbols= - case $host_os in - cygwin* | mingw* | cegcc*) - if test -n "$export_symbols" && test -z "$export_symbols_regex"; then - # exporting using user supplied symfile - func_dll_def_p "$export_symbols" || { - # and it's NOT already a .def file. Must figure out - # which of the given symbols are data symbols and tag - # them as such. So, trigger use of export_symbols_cmds. - # export_symbols gets reassigned inside the "prepare - # the list of exported symbols" if statement, so the - # include_expsyms logic still works. - orig_export_symbols=$export_symbols - export_symbols= - always_export_symbols=yes - } - fi - ;; - esac - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then - func_verbose "generating symbol list for '$libname.la'" - export_symbols=$output_objdir/$libname.exp - $opt_dry_run || $RM $export_symbols - cmds=$export_symbols_cmds - save_ifs=$IFS; IFS='~' - for cmd1 in $cmds; do - IFS=$save_ifs - # Take the normal branch if the nm_file_list_spec branch - # doesn't work or if tool conversion is not needed. - case $nm_file_list_spec~$to_tool_file_cmd in - *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) - try_normal_branch=yes - eval cmd=\"$cmd1\" - func_len " $cmd" - len=$func_len_result - ;; - *) - try_normal_branch=no - ;; - esac - if test yes = "$try_normal_branch" \ - && { test "$len" -lt "$max_cmd_len" \ - || test "$max_cmd_len" -le -1; } - then - func_show_eval "$cmd" 'exit $?' - skipped_export=false - elif test -n "$nm_file_list_spec"; then - func_basename "$output" - output_la=$func_basename_result - save_libobjs=$libobjs - save_output=$output - output=$output_objdir/$output_la.nm - func_to_tool_file "$output" - libobjs=$nm_file_list_spec$func_to_tool_file_result - func_append delfiles " $output" - func_verbose "creating $NM input file list: $output" - for obj in $save_libobjs; do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > "$output" - eval cmd=\"$cmd1\" - func_show_eval "$cmd" 'exit $?' - output=$save_output - libobjs=$save_libobjs - skipped_export=false - else - # The command line is too long to execute in one step. - func_verbose "using reloadable object file for export list..." - skipped_export=: - # Break out early, otherwise skipped_export may be - # set to false by a later but shorter cmd. - break - fi - done - IFS=$save_ifs - if test -n "$export_symbols_regex" && test : != "$skipped_export"; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols=$export_symbols - test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' - fi - - if test : != "$skipped_export" && test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for '$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands, which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - - tmp_deplibs= - for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - func_append tmp_deplibs " $test_deplib" - ;; - esac - done - deplibs=$tmp_deplibs - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec" && - test yes = "$compiler_needs_object" && - test -z "$libobjs"; then - # extract the archives, so we have objects to list. - # TODO: could optimize this to just extract one archive. - whole_archive_flag_spec= - fi - if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - else - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - - func_extract_archives $gentop $convenience - func_append libobjs " $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - fi - - if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - func_append linker_flags " $flag" - fi - - # Make a backup of the uninstalled library when relinking - if test relink = "$opt_mode"; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? - fi - - # Do each of the archive commands. - if test yes = "$module" && test -n "$module_cmds"; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - eval test_cmds=\"$module_expsym_cmds\" - cmds=$module_expsym_cmds - else - eval test_cmds=\"$module_cmds\" - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds - else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds - fi - fi - - if test : != "$skipped_export" && - func_len " $test_cmds" && - len=$func_len_result && - test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # The command line is too long to link in one step, link piecewise - # or, if using GNU ld and skipped_export is not :, use a linker - # script. - - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - func_basename "$output" - output_la=$func_basename_result - - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - last_robj= - k=1 - - if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then - output=$output_objdir/$output_la.lnkscript - func_verbose "creating GNU ld script: $output" - echo 'INPUT (' > $output - for obj in $save_libobjs - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output - done - echo ')' >> $output - func_append delfiles " $output" - func_to_tool_file "$output" - output=$func_to_tool_file_result - elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then - output=$output_objdir/$output_la.lnk - func_verbose "creating linker input file list: $output" - : > $output - set x $save_libobjs - shift - firstobj= - if test yes = "$compiler_needs_object"; then - firstobj="$1 " - shift - fi - for obj - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output - done - func_append delfiles " $output" - func_to_tool_file "$output" - output=$firstobj\"$file_list_spec$func_to_tool_file_result\" - else - if test -n "$save_libobjs"; then - func_verbose "creating reloadable object files..." - output=$output_objdir/$output_la-$k.$objext - eval test_cmds=\"$reload_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - if test -z "$objlist" || - test "$len" -lt "$max_cmd_len"; then - func_append objlist " $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test 1 -eq "$k"; then - # The first file doesn't have a previous command to add. - reload_objs=$objlist - eval concat_cmds=\"$reload_cmds\" - else - # All subsequent reloadable object files will link in - # the last one created. - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" - fi - last_robj=$output_objdir/$output_la-$k.$objext - func_arith $k + 1 - k=$func_arith_result - output=$output_objdir/$output_la-$k.$objext - objlist=" $obj" - func_len " $last_robj" - func_arith $len0 + $func_len_result - len=$func_arith_result - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - reload_objs="$objlist $last_robj" - eval concat_cmds=\"\$concat_cmds$reload_cmds\" - if test -n "$last_robj"; then - eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" - fi - func_append delfiles " $output" - - else - output= - fi - - ${skipped_export-false} && { - func_verbose "generating symbol list for '$libname.la'" - export_symbols=$output_objdir/$libname.exp - $opt_dry_run || $RM $export_symbols - libobjs=$output - # Append the command to create the export file. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" - if test -n "$last_robj"; then - eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" - fi - } - - test -n "$save_libobjs" && - func_verbose "creating a temporary reloadable object file: $output" - - # Loop through the commands generated above and execute them. - save_ifs=$IFS; IFS='~' - for cmd in $concat_cmds; do - IFS=$save_ifs - $opt_quiet || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test relink = "$opt_mode"; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS=$save_ifs - - if test -n "$export_symbols_regex" && ${skipped_export-false}; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - - ${skipped_export-false} && { - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols=$export_symbols - test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols - $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' - fi - - if test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for '$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands, which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - func_append delfiles " $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - } - - libobjs=$output - # Restore the value of output. - output=$save_output - - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. - - # Do each of the archive commands. - if test yes = "$module" && test -n "$module_cmds"; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - cmds=$module_expsym_cmds - else - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds - fi - fi - fi - - if test -n "$delfiles"; then - # Append the command to remove temporary files to $cmds. - eval cmds=\"\$cmds~\$RM $delfiles\" - fi - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - - func_extract_archives $gentop $dlprefiles - func_append libobjs " $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - - save_ifs=$IFS; IFS='~' - for cmd in $cmds; do - IFS=$sp$nl - eval cmd=\"$cmd\" - IFS=$save_ifs - $opt_quiet || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test relink = "$opt_mode"; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS=$save_ifs - - # Restore the uninstalled library and exit - if test relink = "$opt_mode"; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? - - if test -n "$convenience"; then - if test -z "$whole_archive_flag_spec"; then - func_show_eval '${RM}r "$gentop"' - fi - fi - - exit $EXIT_SUCCESS - fi - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test yes = "$module" || test yes = "$export_dynamic"; then - # On all known operating systems, these are identical. - dlname=$soname - fi - fi - ;; - - obj) - if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then - func_warning "'-dlopen' is ignored for objects" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "'-l' and '-L' are ignored for objects" ;; - esac - - test -n "$rpath" && \ - func_warning "'-rpath' is ignored for objects" - - test -n "$xrpath" && \ - func_warning "'-R' is ignored for objects" - - test -n "$vinfo" && \ - func_warning "'-version-info' is ignored for objects" - - test -n "$release" && \ - func_warning "'-release' is ignored for objects" - - case $output in - *.lo) - test -n "$objs$old_deplibs" && \ - func_fatal_error "cannot build library object '$output' from non-libtool objects" - - libobj=$output - func_lo2o "$libobj" - obj=$func_lo2o_result - ;; - *) - libobj= - obj=$output - ;; - esac - - # Delete the old objects. - $opt_dry_run || $RM $obj $libobj - - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # if reload_cmds runs $LD directly, get rid of -Wl from - # whole_archive_flag_spec and hope we can get by with turning comma - # into space. - case $reload_cmds in - *\$LD[\ \$]*) wl= ;; - esac - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` - reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags - else - gentop=$output_objdir/${obj}x - func_append generated " $gentop" - - func_extract_archives $gentop $convenience - reload_conv_objs="$reload_objs $func_extract_archives_result" - fi - fi - - # If we're not building shared, we need to use non_pic_objs - test yes = "$build_libtool_libs" || libobjs=$non_pic_objects - - # Create the old-style object. - reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs - - output=$obj - func_execute_cmds "$reload_cmds" 'exit $?' - - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - fi - - test yes = "$build_libtool_libs" || { - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? - exit $EXIT_SUCCESS - } - - if test -n "$pic_flag" || test default != "$pic_mode"; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output=$libobj - func_execute_cmds "$reload_cmds" 'exit $?' - fi - - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - ;; - - prog) - case $host in - *cygwin*) func_stripname '' '.exe' "$output" - output=$func_stripname_result.exe;; - esac - test -n "$vinfo" && \ - func_warning "'-version-info' is ignored for programs" - - test -n "$release" && \ - func_warning "'-release' is ignored for programs" - - $preload \ - && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \ - && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support." - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` - ;; - esac - - case $host in - *-*-darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - # But is supposedly fixed on 10.4 or later (yay!). - if test CXX = "$tagname"; then - case ${MACOSX_DEPLOYMENT_TARGET-10.0} in - 10.[0123]) - func_append compile_command " $wl-bind_at_load" - func_append finalize_command " $wl-bind_at_load" - ;; - esac - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $compile_deplibs " in - *" -L$path/$objdir "*) - func_append new_libs " -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $compile_deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) func_append new_libs " $deplib" ;; - esac - ;; - *) func_append new_libs " $deplib" ;; - esac - done - compile_deplibs=$new_libs - - - func_append compile_command " $compile_deplibs" - func_append finalize_command " $finalize_deplibs" - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; - *) func_append finalize_rpath " $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs=$libdir - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) func_append perm_rpath " $libdir" ;; - esac - fi - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$libdir:"*) ;; - ::) dllsearchpath=$libdir;; - *) func_append dllsearchpath ":$libdir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; - *) func_append dllsearchpath ":$testbindir";; - esac - ;; - esac - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir=$hardcode_libdirs - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath=$rpath - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs=$libdir - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - func_append rpath " $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) func_append finalize_perm_rpath " $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir=$hardcode_libdirs - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath=$rpath - - if test -n "$libobjs" && test yes = "$build_old_libs"; then - # Transform all the library objects into standard objects. - compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` - finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` - fi - - func_generate_dlsyms "$outputname" "@PROGRAM@" false - - # template prelinking step - if test -n "$prelink_cmds"; then - func_execute_cmds "$prelink_cmds" 'exit $?' - fi - - wrappers_required=: - case $host in - *cegcc* | *mingw32ce*) - # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. - wrappers_required=false - ;; - *cygwin* | *mingw* ) - test yes = "$build_libtool_libs" || wrappers_required=false - ;; - *) - if test no = "$need_relink" || test yes != "$build_libtool_libs"; then - wrappers_required=false - fi - ;; - esac - $wrappers_required || { - # Replace the output file specification. - compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` - link_command=$compile_command$compile_rpath - - # We have no uninstalled library dependencies, so finalize right now. - exit_status=0 - func_show_eval "$link_command" 'exit_status=$?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - - # Delete the generated files. - if test -f "$output_objdir/${outputname}S.$objext"; then - func_show_eval '$RM "$output_objdir/${outputname}S.$objext"' - fi - - exit $exit_status - } - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - func_append rpath "$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - func_append rpath "$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test yes = "$no_install"; then - # We don't need to create a wrapper script. - link_command=$compile_var$compile_command$compile_rpath - # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $opt_dry_run || $RM $output - # Link the executable and exit - func_show_eval "$link_command" 'exit $?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - - exit $EXIT_SUCCESS - fi - - case $hardcode_action,$fast_install in - relink,*) - # Fast installation is not supported - link_command=$compile_var$compile_command$compile_rpath - relink_command=$finalize_var$finalize_command$finalize_rpath - - func_warning "this platform does not like uninstalled shared libraries" - func_warning "'$output' will be relinked during installation" - ;; - *,yes) - link_command=$finalize_var$compile_command$finalize_rpath - relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` - ;; - *,no) - link_command=$compile_var$compile_command$compile_rpath - relink_command=$finalize_var$finalize_command$finalize_rpath - ;; - *,needless) - link_command=$finalize_var$compile_command$finalize_rpath - relink_command= - ;; - esac - - # Replace the output file specification. - link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - - func_show_eval "$link_command" 'exit $?' - - if test -n "$postlink_cmds"; then - func_to_tool_file "$output_objdir/$outputname" - postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` - func_execute_cmds "$postlink_cmds" 'exit $?' - fi - - # Now create the wrapper script. - func_verbose "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` - fi - - # Only actually do things if not in dry run mode. - $opt_dry_run || { - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) func_stripname '' '.exe' "$output" - output=$func_stripname_result ;; - esac - # test for cygwin because mv fails w/o .exe extensions - case $host in - *cygwin*) - exeext=.exe - func_stripname '' '.exe' "$outputname" - outputname=$func_stripname_result ;; - *) exeext= ;; - esac - case $host in - *cygwin* | *mingw* ) - func_dirname_and_basename "$output" "" "." - output_name=$func_basename_result - output_path=$func_dirname_result - cwrappersource=$output_path/$objdir/lt-$output_name.c - cwrapper=$output_path/$output_name.exe - $RM $cwrappersource $cwrapper - trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - func_emit_cwrapperexe_src > $cwrappersource - - # The wrapper executable is built using the $host compiler, - # because it contains $host paths and files. If cross- - # compiling, it, like the target executable, must be - # executed on the $host or under an emulation environment. - $opt_dry_run || { - $LTCC $LTCFLAGS -o $cwrapper $cwrappersource - $STRIP $cwrapper - } - - # Now, create the wrapper script for func_source use: - func_ltwrapper_scriptname $cwrapper - $RM $func_ltwrapper_scriptname_result - trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 - $opt_dry_run || { - # note: this script will not be executed, so do not chmod. - if test "x$build" = "x$host"; then - $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result - else - func_emit_wrapper no > $func_ltwrapper_scriptname_result - fi - } - ;; - * ) - $RM $output - trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - - func_emit_wrapper no > $output - chmod +x $output - ;; - esac - } - exit $EXIT_SUCCESS - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - case $build_libtool_libs in - convenience) - oldobjs="$libobjs_save $symfileobj" - addlibs=$convenience - build_libtool_libs=no - ;; - module) - oldobjs=$libobjs_save - addlibs=$old_convenience - build_libtool_libs=no - ;; - *) - oldobjs="$old_deplibs $non_pic_objects" - $preload && test -f "$symfileobj" \ - && func_append oldobjs " $symfileobj" - addlibs=$old_convenience - ;; - esac - - if test -n "$addlibs"; then - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - - func_extract_archives $gentop $addlibs - func_append oldobjs " $func_extract_archives_result" - fi - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then - cmds=$old_archive_from_new_cmds - else - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - - func_extract_archives $gentop $dlprefiles - func_append oldobjs " $func_extract_archives_result" - fi - - # POSIX demands no paths to be encoded in archives. We have - # to avoid creating archives with duplicate basenames if we - # might have to extract them afterwards, e.g., when creating a - # static archive out of a convenience library, or when linking - # the entirety of a libtool archive into another (currently - # not supported by libtool). - if (for obj in $oldobjs - do - func_basename "$obj" - $ECHO "$func_basename_result" - done | sort | sort -uc >/dev/null 2>&1); then - : - else - echo "copying selected object files to avoid basename conflicts..." - gentop=$output_objdir/${outputname}x - func_append generated " $gentop" - func_mkdir_p "$gentop" - save_oldobjs=$oldobjs - oldobjs= - counter=1 - for obj in $save_oldobjs - do - func_basename "$obj" - objbase=$func_basename_result - case " $oldobjs " in - " ") oldobjs=$obj ;; - *[\ /]"$objbase "*) - while :; do - # Make sure we don't pick an alternate name that also - # overlaps. - newobj=lt$counter-$objbase - func_arith $counter + 1 - counter=$func_arith_result - case " $oldobjs " in - *[\ /]"$newobj "*) ;; - *) if test ! -f "$gentop/$newobj"; then break; fi ;; - esac - done - func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - func_append oldobjs " $gentop/$newobj" - ;; - *) func_append oldobjs " $obj" ;; - esac - done - fi - func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 - tool_oldlib=$func_to_tool_file_result - eval cmds=\"$old_archive_cmds\" - - func_len " $cmds" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - cmds=$old_archive_cmds - elif test -n "$archiver_list_spec"; then - func_verbose "using command file archive linking..." - for obj in $oldobjs - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" - done > $output_objdir/$libname.libcmd - func_to_tool_file "$output_objdir/$libname.libcmd" - oldobjs=" $archiver_list_spec$func_to_tool_file_result" - cmds=$old_archive_cmds - else - # the command line is too long to link in one step, link in parts - func_verbose "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs - oldobjs= - # Is there a better way of finding the last object in the list? - for obj in $save_oldobjs - do - last_oldobj=$obj - done - eval test_cmds=\"$old_archive_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - for obj in $save_oldobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - func_append objlist " $obj" - if test "$len" -lt "$max_cmd_len"; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - if test "$obj" = "$last_oldobj"; then - RANLIB=$save_RANLIB - fi - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\$concat_cmds$old_archive_cmds\" - objlist= - len=$len0 - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - if test -z "$oldobjs"; then - eval cmds=\"\$concat_cmds\" - else - eval cmds=\"\$concat_cmds~\$old_archive_cmds\" - fi - fi - fi - func_execute_cmds "$cmds" 'exit $?' - done - - test -n "$generated" && \ - func_show_eval "${RM}r$generated" - - # Now create the libtool archive. - case $output in - *.la) - old_library= - test yes = "$build_old_libs" && old_library=$libname.$libext - func_verbose "creating $output" - - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` - if test yes = "$hardcode_automatic"; then - relink_command= - fi - - # Only create the output if not a dry run. - $opt_dry_run || { - for installed in no yes; do - if test yes = "$installed"; then - if test -z "$install_libdir"; then - break - fi - output=$output_objdir/${outputname}i - # Replace all uninstalled libtool libraries with the installed ones - newdependency_libs= - for deplib in $dependency_libs; do - case $deplib in - *.la) - func_basename "$deplib" - name=$func_basename_result - func_resolve_sysroot "$deplib" - eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` - test -z "$libdir" && \ - func_fatal_error "'$deplib' is not a valid libtool archive" - func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" - ;; - -L*) - func_stripname -L '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -L$func_replace_sysroot_result" - ;; - -R*) - func_stripname -R '' "$deplib" - func_replace_sysroot "$func_stripname_result" - func_append newdependency_libs " -R$func_replace_sysroot_result" - ;; - *) func_append newdependency_libs " $deplib" ;; - esac - done - dependency_libs=$newdependency_libs - newdlfiles= - - for lib in $dlfiles; do - case $lib in - *.la) - func_basename "$lib" - name=$func_basename_result - eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "'$lib' is not a valid libtool archive" - func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" - ;; - *) func_append newdlfiles " $lib" ;; - esac - done - dlfiles=$newdlfiles - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - *.la) - # Only pass preopened files to the pseudo-archive (for - # eventual linking with the app. that links it) if we - # didn't already link the preopened objects directly into - # the library: - func_basename "$lib" - name=$func_basename_result - eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "'$lib' is not a valid libtool archive" - func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" - ;; - esac - done - dlprefiles=$newdlprefiles - else - newdlfiles= - for lib in $dlfiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; - *) abs=`pwd`"/$lib" ;; - esac - func_append newdlfiles " $abs" - done - dlfiles=$newdlfiles - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;; - *) abs=`pwd`"/$lib" ;; - esac - func_append newdlprefiles " $abs" - done - dlprefiles=$newdlprefiles - fi - $RM $output - # place dlname in correct position for cygwin - # In fact, it would be nice if we could use this code for all target - # systems that can't hard-code library paths into their executables - # and that have no shared library path variable independent of PATH, - # but it turns out we can't easily determine that from inspecting - # libtool variables, so we have to hard-code the OSs to which it - # applies here; at the moment, that means platforms that use the PE - # object format with DLL files. See the long comment at the top of - # tests/bindir.at for full details. - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) - # If a -bindir argument was supplied, place the dll there. - if test -n "$bindir"; then - func_relative_path "$install_libdir" "$bindir" - tdlname=$func_relative_path_result/$dlname - else - # Otherwise fall back on heuristic. - tdlname=../bin/$dlname - fi - ;; - esac - $ECHO > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM (GNU $PACKAGE) $VERSION -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# The name that we can dlopen(3). -dlname='$tdlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Linker flags that cannot go in dependency_libs. -inherited_linker_flags='$new_inherited_linker_flags' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Names of additional weak libraries provided by this library -weak_library_names='$weak_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=$installed - -# Should we warn about portability when linking against -modules? -shouldnotlink=$module - -# Files to dlopen/dlpreopen -dlopen='$dlfiles' -dlpreopen='$dlprefiles' - -# Directory that this library needs to be installed in: -libdir='$install_libdir'" - if test no,yes = "$installed,$need_relink"; then - $ECHO >> $output "\ -relink_command=\"$relink_command\"" - fi - done - } - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' - ;; - esac - exit $EXIT_SUCCESS -} - -if test link = "$opt_mode" || test relink = "$opt_mode"; then - func_mode_link ${1+"$@"} -fi - - -# func_mode_uninstall arg... -func_mode_uninstall () -{ - $debug_cmd - - RM=$nonopt - files= - rmforce=false - exit_status=0 - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic=$magic - - for arg - do - case $arg in - -f) func_append RM " $arg"; rmforce=: ;; - -*) func_append RM " $arg" ;; - *) func_append files " $arg" ;; - esac - done - - test -z "$RM" && \ - func_fatal_help "you must specify an RM program" - - rmdirs= - - for file in $files; do - func_dirname "$file" "" "." - dir=$func_dirname_result - if test . = "$dir"; then - odir=$objdir - else - odir=$dir/$objdir - fi - func_basename "$file" - name=$func_basename_result - test uninstall = "$opt_mode" && odir=$dir - - # Remember odir for removal later, being careful to avoid duplicates - if test clean = "$opt_mode"; then - case " $rmdirs " in - *" $odir "*) ;; - *) func_append rmdirs " $odir" ;; - esac - fi - - # Don't error if the file doesn't exist and rm -f was used. - if { test -L "$file"; } >/dev/null 2>&1 || - { test -h "$file"; } >/dev/null 2>&1 || - test -f "$file"; then - : - elif test -d "$file"; then - exit_status=1 - continue - elif $rmforce; then - continue - fi - - rmfiles=$file - - case $name in - *.la) - # Possibly a libtool archive, so verify it. - if func_lalib_p "$file"; then - func_source $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - func_append rmfiles " $odir/$n" - done - test -n "$old_library" && func_append rmfiles " $odir/$old_library" - - case $opt_mode in - clean) - case " $library_names " in - *" $dlname "*) ;; - *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; - esac - test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" - ;; - uninstall) - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1' - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1' - fi - # FIXME: should reinstall the best remaining shared library. - ;; - esac - fi - ;; - - *.lo) - # Possibly a libtool object, so verify it. - if func_lalib_p "$file"; then - - # Read the .lo file - func_source $dir/$name - - # Add PIC object to the list of files to remove. - if test -n "$pic_object" && test none != "$pic_object"; then - func_append rmfiles " $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" && test none != "$non_pic_object"; then - func_append rmfiles " $dir/$non_pic_object" - fi - fi - ;; - - *) - if test clean = "$opt_mode"; then - noexename=$name - case $file in - *.exe) - func_stripname '' '.exe' "$file" - file=$func_stripname_result - func_stripname '' '.exe' "$name" - noexename=$func_stripname_result - # $file with .exe has already been added to rmfiles, - # add $file without .exe - func_append rmfiles " $file" - ;; - esac - # Do a test to see if this is a libtool program. - if func_ltwrapper_p "$file"; then - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - relink_command= - func_source $func_ltwrapper_scriptname_result - func_append rmfiles " $func_ltwrapper_scriptname_result" - else - relink_command= - func_source $dir/$noexename - fi - - # note $name still contains .exe if it was in $file originally - # as does the version of $file that was added into $rmfiles - func_append rmfiles " $odir/$name $odir/${name}S.$objext" - if test yes = "$fast_install" && test -n "$relink_command"; then - func_append rmfiles " $odir/lt-$name" - fi - if test "X$noexename" != "X$name"; then - func_append rmfiles " $odir/lt-$noexename.c" - fi - fi - fi - ;; - esac - func_show_eval "$RM $rmfiles" 'exit_status=1' - done - - # Try to remove the $objdir's in the directories where we deleted files - for dir in $rmdirs; do - if test -d "$dir"; then - func_show_eval "rmdir $dir >/dev/null 2>&1" - fi - done - - exit $exit_status -} - -if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then - func_mode_uninstall ${1+"$@"} -fi - -test -z "$opt_mode" && { - help=$generic_help - func_fatal_help "you must specify a MODE" -} - -test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode '$opt_mode'" - -if test -n "$exec_cmd"; then - eval exec "$exec_cmd" - exit $EXIT_FAILURE -fi - -exit $exit_status - - -# The TAGs below are defined such that we never get into a situation -# where we disable both kinds of libraries. Given conflicting -# choices, we go for a static library, that is the most portable, -# since we can't tell whether shared libraries were disabled because -# the user asked for that or because the platform doesn't support -# them. This is particularly important on AIX, because we don't -# support having both static and shared libraries enabled at the same -# time on that platform, so we default to a shared-only configuration. -# If a disable-shared tag is given, we'll fallback to a static-only -# configuration. But we'll never go from static-only to shared-only. - -# ### BEGIN LIBTOOL TAG CONFIG: disable-shared -build_libtool_libs=no -build_old_libs=yes -# ### END LIBTOOL TAG CONFIG: disable-shared - -# ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` -# ### END LIBTOOL TAG CONFIG: disable-static - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: diff -Nru hitori-3.22.4/m4/appstream-xml.m4 hitori-3.31.0/m4/appstream-xml.m4 --- hitori-3.22.4/m4/appstream-xml.m4 2016-12-20 13:33:08.000000000 +0000 +++ hitori-3.31.0/m4/appstream-xml.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,86 +0,0 @@ -# appstream-xml.m4 -# -# serial 6 - -dnl APPSTREAM_XML -dnl Installs and validates AppData XML files. -dnl -dnl Call APPSTREAM_XML in configure.ac to check for the appstream-util tool. -dnl Add @APPSTREAM_XML_RULES@ to a Makefile.am to substitute the make rules. Add -dnl .appdata.xml files to appstream_XML in Makefile.am and they will be validated -dnl at make check time, if appstream-util is installed, as well as installed -dnl to the correct location automatically. Add --enable-appstream-util to -dnl AM_DISTCHECK_CONFIGURE_FLAGS in Makefile.am to require valid AppData XML when -dnl doing a distcheck. -dnl -dnl Adding files to appstream_XML does not distribute them automatically. - -AC_DEFUN([APPSTREAM_XML], -[ - m4_pattern_allow([AM_V_GEN]) - AC_ARG_ENABLE([appstream-util], - [AS_HELP_STRING([--disable-appstream-util], - [Disable validating AppData XML files during check phase])]) - - AS_IF([test "x$enable_appstream_validate" != "xno"], - [AC_PATH_PROG([APPSTREAM_UTIL], [appstream-util]) - AS_IF([test "x$APPSTREAM_UTIL" = "x"], - [have_appstream_validate=no], - [have_appstream_validate=yes - AC_SUBST([APPSTREAM_UTIL])])], - [have_appstream_validate=no]) - - AS_IF([test "x$have_appstream_validate" != "xno"], - [appstream_validate=yes], - [appstream_validate=no - AS_IF([test "x$enable_appstream_validate" = "xyes"], - [AC_MSG_ERROR([AppData validation was requested but appstream-util was not found])])]) - - AC_SUBST([appstreamxmldir], [${datadir}/appdata]) - - APPSTREAM_XML_RULES=' -.PHONY : uninstall-appstream-xml install-appstream-xml clean-appstream-xml - -mostlyclean-am: clean-appstream-xml - -%.appdata.valid: %.appdata.xml - $(AM_V_GEN) if test -f "$<"; then d=; else d="$(srcdir)/"; fi; \ - if test -n "$(APPSTREAM_UTIL)"; \ - then $(APPSTREAM_UTIL) --nonet validate $${d}$<; fi \ - && touch [$]@ - -check-am: $(appstream_XML:.appdata.xml=.appdata.valid) -uninstall-am: uninstall-appstream-xml -install-data-am: install-appstream-xml - -.SECONDARY: $(appstream_XML) - -install-appstream-xml: $(appstream_XML) - @$(NORMAL_INSTALL) - if test -n "$^"; then \ - test -z "$(appstreamxmldir)" || $(MKDIR_P) "$(DESTDIR)$(appstreamxmldir)"; \ - $(INSTALL_DATA) $^ "$(DESTDIR)$(appstreamxmldir)"; \ - fi - -uninstall-appstream-xml: - @$(NORMAL_UNINSTALL) - @list='\''$(appstream_XML)'\''; test -n "$(appstreamxmldir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e '\''s|^.*/||'\''`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '\''$(DESTDIR)$(appstreamxmldir)'\'' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(appstreamxmldir)" && rm -f $$files - -clean-appstream-xml: - rm -f $(appstream_XML:.appdata.xml=.appdata.valid) -' - _APPSTREAM_XML_SUBST(APPSTREAM_XML_RULES) -]) - -dnl _APPSTREAM_XML_SUBST(VARIABLE) -dnl Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST -AC_DEFUN([_APPSTREAM_XML_SUBST], -[ -AC_SUBST([$1]) -m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) -] -) diff -Nru hitori-3.22.4/m4/ax_append_compile_flags.m4 hitori-3.31.0/m4/ax_append_compile_flags.m4 --- hitori-3.22.4/m4/ax_append_compile_flags.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_append_compile_flags.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,67 +0,0 @@ -# ============================================================================ -# https://www.gnu.org/software/autoconf-archive/ax_append_compile_flags.html -# ============================================================================ -# -# SYNOPSIS -# -# AX_APPEND_COMPILE_FLAGS([FLAG1 FLAG2 ...], [FLAGS-VARIABLE], [EXTRA-FLAGS], [INPUT]) -# -# DESCRIPTION -# -# For every FLAG1, FLAG2 it is checked whether the compiler works with the -# flag. If it does, the flag is added FLAGS-VARIABLE -# -# If FLAGS-VARIABLE is not specified, the current language's flags (e.g. -# CFLAGS) is used. During the check the flag is always added to the -# current language's flags. -# -# If EXTRA-FLAGS is defined, it is added to the current language's default -# flags (e.g. CFLAGS) when the check is done. The check is thus made with -# the flags: "CFLAGS EXTRA-FLAGS FLAG". This can for example be used to -# force the compiler to issue an error when a bad flag is given. -# -# INPUT gives an alternative input source to AC_COMPILE_IFELSE. -# -# NOTE: This macro depends on the AX_APPEND_FLAG and -# AX_CHECK_COMPILE_FLAG. Please keep this macro in sync with -# AX_APPEND_LINK_FLAGS. -# -# LICENSE -# -# Copyright (c) 2011 Maarten Bosmans -# -# This program is free software: you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation, either version 3 of the License, or (at your -# option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -# Public License for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program. If not, see . -# -# As a special exception, the respective Autoconf Macro's copyright owner -# gives unlimited permission to copy, distribute and modify the configure -# scripts that are the output of Autoconf when processing the Macro. You -# need not follow the terms of the GNU General Public License when using -# or distributing such scripts, even though portions of the text of the -# Macro appear in them. The GNU General Public License (GPL) does govern -# all other use of the material that constitutes the Autoconf Macro. -# -# This special exception to the GPL applies to versions of the Autoconf -# Macro released by the Autoconf Archive. When you make and distribute a -# modified version of the Autoconf Macro, you may extend this special -# exception to the GPL to apply to your modified version as well. - -#serial 6 - -AC_DEFUN([AX_APPEND_COMPILE_FLAGS], -[AX_REQUIRE_DEFINED([AX_CHECK_COMPILE_FLAG]) -AX_REQUIRE_DEFINED([AX_APPEND_FLAG]) -for flag in $1; do - AX_CHECK_COMPILE_FLAG([$flag], [AX_APPEND_FLAG([$flag], [$2])], [], [$3], [$4]) -done -])dnl AX_APPEND_COMPILE_FLAGS diff -Nru hitori-3.22.4/m4/ax_append_flag.m4 hitori-3.31.0/m4/ax_append_flag.m4 --- hitori-3.22.4/m4/ax_append_flag.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_append_flag.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,71 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_append_flag.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_APPEND_FLAG(FLAG, [FLAGS-VARIABLE]) -# -# DESCRIPTION -# -# FLAG is appended to the FLAGS-VARIABLE shell variable, with a space -# added in between. -# -# If FLAGS-VARIABLE is not specified, the current language's flags (e.g. -# CFLAGS) is used. FLAGS-VARIABLE is not changed if it already contains -# FLAG. If FLAGS-VARIABLE is unset in the shell, it is set to exactly -# FLAG. -# -# NOTE: Implementation based on AX_CFLAGS_GCC_OPTION. -# -# LICENSE -# -# Copyright (c) 2008 Guido U. Draheim -# Copyright (c) 2011 Maarten Bosmans -# -# This program is free software: you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation, either version 3 of the License, or (at your -# option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -# Public License for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program. If not, see . -# -# As a special exception, the respective Autoconf Macro's copyright owner -# gives unlimited permission to copy, distribute and modify the configure -# scripts that are the output of Autoconf when processing the Macro. You -# need not follow the terms of the GNU General Public License when using -# or distributing such scripts, even though portions of the text of the -# Macro appear in them. The GNU General Public License (GPL) does govern -# all other use of the material that constitutes the Autoconf Macro. -# -# This special exception to the GPL applies to versions of the Autoconf -# Macro released by the Autoconf Archive. When you make and distribute a -# modified version of the Autoconf Macro, you may extend this special -# exception to the GPL to apply to your modified version as well. - -#serial 7 - -AC_DEFUN([AX_APPEND_FLAG], -[dnl -AC_PREREQ(2.64)dnl for _AC_LANG_PREFIX and AS_VAR_SET_IF -AS_VAR_PUSHDEF([FLAGS], [m4_default($2,_AC_LANG_PREFIX[FLAGS])]) -AS_VAR_SET_IF(FLAGS,[ - AS_CASE([" AS_VAR_GET(FLAGS) "], - [*" $1 "*], [AC_RUN_LOG([: FLAGS already contains $1])], - [ - AS_VAR_APPEND(FLAGS,[" $1"]) - AC_RUN_LOG([: FLAGS="$FLAGS"]) - ]) - ], - [ - AS_VAR_SET(FLAGS,[$1]) - AC_RUN_LOG([: FLAGS="$FLAGS"]) - ]) -AS_VAR_POPDEF([FLAGS])dnl -])dnl AX_APPEND_FLAG diff -Nru hitori-3.22.4/m4/ax_append_link_flags.m4 hitori-3.31.0/m4/ax_append_link_flags.m4 --- hitori-3.22.4/m4/ax_append_link_flags.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_append_link_flags.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,65 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_append_link_flags.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_APPEND_LINK_FLAGS([FLAG1 FLAG2 ...], [FLAGS-VARIABLE], [EXTRA-FLAGS], [INPUT]) -# -# DESCRIPTION -# -# For every FLAG1, FLAG2 it is checked whether the linker works with the -# flag. If it does, the flag is added FLAGS-VARIABLE -# -# If FLAGS-VARIABLE is not specified, the linker's flags (LDFLAGS) is -# used. During the check the flag is always added to the linker's flags. -# -# If EXTRA-FLAGS is defined, it is added to the linker's default flags -# when the check is done. The check is thus made with the flags: "LDFLAGS -# EXTRA-FLAGS FLAG". This can for example be used to force the linker to -# issue an error when a bad flag is given. -# -# INPUT gives an alternative input source to AC_COMPILE_IFELSE. -# -# NOTE: This macro depends on the AX_APPEND_FLAG and AX_CHECK_LINK_FLAG. -# Please keep this macro in sync with AX_APPEND_COMPILE_FLAGS. -# -# LICENSE -# -# Copyright (c) 2011 Maarten Bosmans -# -# This program is free software: you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation, either version 3 of the License, or (at your -# option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -# Public License for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program. If not, see . -# -# As a special exception, the respective Autoconf Macro's copyright owner -# gives unlimited permission to copy, distribute and modify the configure -# scripts that are the output of Autoconf when processing the Macro. You -# need not follow the terms of the GNU General Public License when using -# or distributing such scripts, even though portions of the text of the -# Macro appear in them. The GNU General Public License (GPL) does govern -# all other use of the material that constitutes the Autoconf Macro. -# -# This special exception to the GPL applies to versions of the Autoconf -# Macro released by the Autoconf Archive. When you make and distribute a -# modified version of the Autoconf Macro, you may extend this special -# exception to the GPL to apply to your modified version as well. - -#serial 6 - -AC_DEFUN([AX_APPEND_LINK_FLAGS], -[AX_REQUIRE_DEFINED([AX_CHECK_LINK_FLAG]) -AX_REQUIRE_DEFINED([AX_APPEND_FLAG]) -for flag in $1; do - AX_CHECK_LINK_FLAG([$flag], [AX_APPEND_FLAG([$flag], [m4_default([$2], [LDFLAGS])])], [], [$3], [$4]) -done -])dnl AX_APPEND_LINK_FLAGS diff -Nru hitori-3.22.4/m4/ax_check_compile_flag.m4 hitori-3.31.0/m4/ax_check_compile_flag.m4 --- hitori-3.22.4/m4/ax_check_compile_flag.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_check_compile_flag.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,74 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_check_compile_flag.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_CHECK_COMPILE_FLAG(FLAG, [ACTION-SUCCESS], [ACTION-FAILURE], [EXTRA-FLAGS], [INPUT]) -# -# DESCRIPTION -# -# Check whether the given FLAG works with the current language's compiler -# or gives an error. (Warnings, however, are ignored) -# -# ACTION-SUCCESS/ACTION-FAILURE are shell commands to execute on -# success/failure. -# -# If EXTRA-FLAGS is defined, it is added to the current language's default -# flags (e.g. CFLAGS) when the check is done. The check is thus made with -# the flags: "CFLAGS EXTRA-FLAGS FLAG". This can for example be used to -# force the compiler to issue an error when a bad flag is given. -# -# INPUT gives an alternative input source to AC_COMPILE_IFELSE. -# -# NOTE: Implementation based on AX_CFLAGS_GCC_OPTION. Please keep this -# macro in sync with AX_CHECK_{PREPROC,LINK}_FLAG. -# -# LICENSE -# -# Copyright (c) 2008 Guido U. Draheim -# Copyright (c) 2011 Maarten Bosmans -# -# This program is free software: you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation, either version 3 of the License, or (at your -# option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -# Public License for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program. If not, see . -# -# As a special exception, the respective Autoconf Macro's copyright owner -# gives unlimited permission to copy, distribute and modify the configure -# scripts that are the output of Autoconf when processing the Macro. You -# need not follow the terms of the GNU General Public License when using -# or distributing such scripts, even though portions of the text of the -# Macro appear in them. The GNU General Public License (GPL) does govern -# all other use of the material that constitutes the Autoconf Macro. -# -# This special exception to the GPL applies to versions of the Autoconf -# Macro released by the Autoconf Archive. When you make and distribute a -# modified version of the Autoconf Macro, you may extend this special -# exception to the GPL to apply to your modified version as well. - -#serial 5 - -AC_DEFUN([AX_CHECK_COMPILE_FLAG], -[AC_PREREQ(2.64)dnl for _AC_LANG_PREFIX and AS_VAR_IF -AS_VAR_PUSHDEF([CACHEVAR],[ax_cv_check_[]_AC_LANG_ABBREV[]flags_$4_$1])dnl -AC_CACHE_CHECK([whether _AC_LANG compiler accepts $1], CACHEVAR, [ - ax_check_save_flags=$[]_AC_LANG_PREFIX[]FLAGS - _AC_LANG_PREFIX[]FLAGS="$[]_AC_LANG_PREFIX[]FLAGS $4 $1" - AC_COMPILE_IFELSE([m4_default([$5],[AC_LANG_PROGRAM()])], - [AS_VAR_SET(CACHEVAR,[yes])], - [AS_VAR_SET(CACHEVAR,[no])]) - _AC_LANG_PREFIX[]FLAGS=$ax_check_save_flags]) -AS_VAR_IF(CACHEVAR,yes, - [m4_default([$2], :)], - [m4_default([$3], :)]) -AS_VAR_POPDEF([CACHEVAR])dnl -])dnl AX_CHECK_COMPILE_FLAGS diff -Nru hitori-3.22.4/m4/ax_check_enable_debug.m4 hitori-3.31.0/m4/ax_check_enable_debug.m4 --- hitori-3.22.4/m4/ax_check_enable_debug.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_check_enable_debug.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,124 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_check_enable_debug.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_CHECK_ENABLE_DEBUG([enable by default=yes/info/profile/no], [ENABLE DEBUG VARIABLES ...], [DISABLE DEBUG VARIABLES NDEBUG ...], [IS-RELEASE]) -# -# DESCRIPTION -# -# Check for the presence of an --enable-debug option to configure, with -# the specified default value used when the option is not present. Return -# the value in the variable $ax_enable_debug. -# -# Specifying 'yes' adds '-g -O0' to the compilation flags for all -# languages. Specifying 'info' adds '-g' to the compilation flags. -# Specifying 'profile' adds '-g -pg' to the compilation flags and '-pg' to -# the linking flags. Otherwise, nothing is added. -# -# Define the variables listed in the second argument if debug is enabled, -# defaulting to no variables. Defines the variables listed in the third -# argument if debug is disabled, defaulting to NDEBUG. All lists of -# variables should be space-separated. -# -# If debug is not enabled, ensure AC_PROG_* will not add debugging flags. -# Should be invoked prior to any AC_PROG_* compiler checks. -# -# IS-RELEASE can be used to change the default to 'no' when making a -# release. Set IS-RELEASE to 'yes' or 'no' as appropriate. By default, it -# uses the value of $ax_is_release, so if you are using the AX_IS_RELEASE -# macro, there is no need to pass this parameter. -# -# AX_IS_RELEASE([git-directory]) -# AX_CHECK_ENABLE_DEBUG() -# -# LICENSE -# -# Copyright (c) 2011 Rhys Ulerich -# Copyright (c) 2014, 2015 Philip Withnall -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. - -#serial 8 - -AC_DEFUN([AX_CHECK_ENABLE_DEBUG],[ - AC_BEFORE([$0],[AC_PROG_CC])dnl - AC_BEFORE([$0],[AC_PROG_CXX])dnl - AC_BEFORE([$0],[AC_PROG_F77])dnl - AC_BEFORE([$0],[AC_PROG_FC])dnl - - AC_MSG_CHECKING(whether to enable debugging) - - ax_enable_debug_default=m4_tolower(m4_normalize(ifelse([$1],,[no],[$1]))) - ax_enable_debug_is_release=m4_tolower(m4_normalize(ifelse([$4],, - [$ax_is_release], - [$4]))) - - # If this is a release, override the default. - AS_IF([test "$ax_enable_debug_is_release" = "yes"], - [ax_enable_debug_default="no"]) - - m4_define(ax_enable_debug_vars,[m4_normalize(ifelse([$2],,,[$2]))]) - m4_define(ax_disable_debug_vars,[m4_normalize(ifelse([$3],,[NDEBUG],[$3]))]) - - AC_ARG_ENABLE(debug, - [AS_HELP_STRING([--enable-debug=]@<:@yes/info/profile/no@:>@,[compile with debugging])], - [],enable_debug=$ax_enable_debug_default) - - # empty mean debug yes - AS_IF([test "x$enable_debug" = "x"], - [enable_debug="yes"]) - - # case of debug - AS_CASE([$enable_debug], - [yes],[ - AC_MSG_RESULT(yes) - CFLAGS="${CFLAGS} -g -O0" - CXXFLAGS="${CXXFLAGS} -g -O0" - FFLAGS="${FFLAGS} -g -O0" - FCFLAGS="${FCFLAGS} -g -O0" - OBJCFLAGS="${OBJCFLAGS} -g -O0" - ], - [info],[ - AC_MSG_RESULT(info) - CFLAGS="${CFLAGS} -g" - CXXFLAGS="${CXXFLAGS} -g" - FFLAGS="${FFLAGS} -g" - FCFLAGS="${FCFLAGS} -g" - OBJCFLAGS="${OBJCFLAGS} -g" - ], - [profile],[ - AC_MSG_RESULT(profile) - CFLAGS="${CFLAGS} -g -pg" - CXXFLAGS="${CXXFLAGS} -g -pg" - FFLAGS="${FFLAGS} -g -pg" - FCFLAGS="${FCFLAGS} -g -pg" - OBJCFLAGS="${OBJCFLAGS} -g -pg" - LDFLAGS="${LDFLAGS} -pg" - ], - [ - AC_MSG_RESULT(no) - dnl Ensure AC_PROG_CC/CXX/F77/FC/OBJC will not enable debug flags - dnl by setting any unset environment flag variables - AS_IF([test "x${CFLAGS+set}" != "xset"], - [CFLAGS=""]) - AS_IF([test "x${CXXFLAGS+set}" != "xset"], - [CXXFLAGS=""]) - AS_IF([test "x${FFLAGS+set}" != "xset"], - [FFLAGS=""]) - AS_IF([test "x${FCFLAGS+set}" != "xset"], - [FCFLAGS=""]) - AS_IF([test "x${OBJCFLAGS+set}" != "xset"], - [OBJCFLAGS=""]) - ]) - - dnl Define various variables if debugging is disabled. - dnl assert.h is a NOP if NDEBUG is defined, so define it by default. - AS_IF([test "x$enable_debug" = "xyes"], - [m4_map_args_w(ax_enable_debug_vars, [AC_DEFINE(], [,,[Define if debugging is enabled])])], - [m4_map_args_w(ax_disable_debug_vars, [AC_DEFINE(], [,,[Define if debugging is disabled])])]) - ax_enable_debug=$enable_debug -]) diff -Nru hitori-3.22.4/m4/ax_check_link_flag.m4 hitori-3.31.0/m4/ax_check_link_flag.m4 --- hitori-3.22.4/m4/ax_check_link_flag.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_check_link_flag.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,74 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_check_link_flag.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_CHECK_LINK_FLAG(FLAG, [ACTION-SUCCESS], [ACTION-FAILURE], [EXTRA-FLAGS], [INPUT]) -# -# DESCRIPTION -# -# Check whether the given FLAG works with the linker or gives an error. -# (Warnings, however, are ignored) -# -# ACTION-SUCCESS/ACTION-FAILURE are shell commands to execute on -# success/failure. -# -# If EXTRA-FLAGS is defined, it is added to the linker's default flags -# when the check is done. The check is thus made with the flags: "LDFLAGS -# EXTRA-FLAGS FLAG". This can for example be used to force the linker to -# issue an error when a bad flag is given. -# -# INPUT gives an alternative input source to AC_LINK_IFELSE. -# -# NOTE: Implementation based on AX_CFLAGS_GCC_OPTION. Please keep this -# macro in sync with AX_CHECK_{PREPROC,COMPILE}_FLAG. -# -# LICENSE -# -# Copyright (c) 2008 Guido U. Draheim -# Copyright (c) 2011 Maarten Bosmans -# -# This program is free software: you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation, either version 3 of the License, or (at your -# option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -# Public License for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program. If not, see . -# -# As a special exception, the respective Autoconf Macro's copyright owner -# gives unlimited permission to copy, distribute and modify the configure -# scripts that are the output of Autoconf when processing the Macro. You -# need not follow the terms of the GNU General Public License when using -# or distributing such scripts, even though portions of the text of the -# Macro appear in them. The GNU General Public License (GPL) does govern -# all other use of the material that constitutes the Autoconf Macro. -# -# This special exception to the GPL applies to versions of the Autoconf -# Macro released by the Autoconf Archive. When you make and distribute a -# modified version of the Autoconf Macro, you may extend this special -# exception to the GPL to apply to your modified version as well. - -#serial 5 - -AC_DEFUN([AX_CHECK_LINK_FLAG], -[AC_PREREQ(2.64)dnl for _AC_LANG_PREFIX and AS_VAR_IF -AS_VAR_PUSHDEF([CACHEVAR],[ax_cv_check_ldflags_$4_$1])dnl -AC_CACHE_CHECK([whether the linker accepts $1], CACHEVAR, [ - ax_check_save_flags=$LDFLAGS - LDFLAGS="$LDFLAGS $4 $1" - AC_LINK_IFELSE([m4_default([$5],[AC_LANG_PROGRAM()])], - [AS_VAR_SET(CACHEVAR,[yes])], - [AS_VAR_SET(CACHEVAR,[no])]) - LDFLAGS=$ax_check_save_flags]) -AS_VAR_IF(CACHEVAR,yes, - [m4_default([$2], :)], - [m4_default([$3], :)]) -AS_VAR_POPDEF([CACHEVAR])dnl -])dnl AX_CHECK_LINK_FLAGS diff -Nru hitori-3.22.4/m4/ax_code_coverage.m4 hitori-3.31.0/m4/ax_code_coverage.m4 --- hitori-3.22.4/m4/ax_code_coverage.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_code_coverage.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,264 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_code_coverage.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_CODE_COVERAGE() -# -# DESCRIPTION -# -# Defines CODE_COVERAGE_CPPFLAGS, CODE_COVERAGE_CFLAGS, -# CODE_COVERAGE_CXXFLAGS and CODE_COVERAGE_LIBS which should be included -# in the CPPFLAGS, CFLAGS CXXFLAGS and LIBS/LIBADD variables of every -# build target (program or library) which should be built with code -# coverage support. Also defines CODE_COVERAGE_RULES which should be -# substituted in your Makefile; and $enable_code_coverage which can be -# used in subsequent configure output. CODE_COVERAGE_ENABLED is defined -# and substituted, and corresponds to the value of the -# --enable-code-coverage option, which defaults to being disabled. -# -# Test also for gcov program and create GCOV variable that could be -# substituted. -# -# Note that all optimization flags in CFLAGS must be disabled when code -# coverage is enabled. -# -# Usage example: -# -# configure.ac: -# -# AX_CODE_COVERAGE -# -# Makefile.am: -# -# @CODE_COVERAGE_RULES@ -# my_program_LIBS = ... $(CODE_COVERAGE_LIBS) ... -# my_program_CPPFLAGS = ... $(CODE_COVERAGE_CPPFLAGS) ... -# my_program_CFLAGS = ... $(CODE_COVERAGE_CFLAGS) ... -# my_program_CXXFLAGS = ... $(CODE_COVERAGE_CXXFLAGS) ... -# -# This results in a "check-code-coverage" rule being added to any -# Makefile.am which includes "@CODE_COVERAGE_RULES@" (assuming the module -# has been configured with --enable-code-coverage). Running `make -# check-code-coverage` in that directory will run the module's test suite -# (`make check`) and build a code coverage report detailing the code which -# was touched, then print the URI for the report. -# -# In earlier versions of this macro, CODE_COVERAGE_LDFLAGS was defined -# instead of CODE_COVERAGE_LIBS. They are both still defined, but use of -# CODE_COVERAGE_LIBS is preferred for clarity; CODE_COVERAGE_LDFLAGS is -# deprecated. They have the same value. -# -# This code was derived from Makefile.decl in GLib, originally licenced -# under LGPLv2.1+. -# -# LICENSE -# -# Copyright (c) 2012, 2016 Philip Withnall -# Copyright (c) 2012 Xan Lopez -# Copyright (c) 2012 Christian Persch -# Copyright (c) 2012 Paolo Borelli -# Copyright (c) 2012 Dan Winship -# Copyright (c) 2015 Bastien ROUCARIES -# -# This library is free software; you can redistribute it and/or modify it -# under the terms of the GNU Lesser General Public License as published by -# the Free Software Foundation; either version 2.1 of the License, or (at -# your option) any later version. -# -# This library is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with this program. If not, see . - -#serial 24 - -AC_DEFUN([AX_CODE_COVERAGE],[ - dnl Check for --enable-code-coverage - AC_REQUIRE([AC_PROG_SED]) - - # allow to override gcov location - AC_ARG_WITH([gcov], - [AS_HELP_STRING([--with-gcov[=GCOV]], [use given GCOV for coverage (GCOV=gcov).])], - [_AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov], - [_AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov]) - - AC_MSG_CHECKING([whether to build with code coverage support]) - AC_ARG_ENABLE([code-coverage], - AS_HELP_STRING([--enable-code-coverage], - [Whether to enable code coverage support]),, - enable_code_coverage=no) - - AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test x$enable_code_coverage = xyes]) - AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage]) - AC_MSG_RESULT($enable_code_coverage) - - AS_IF([ test "$enable_code_coverage" = "yes" ], [ - # check for gcov - AC_CHECK_TOOL([GCOV], - [$_AX_CODE_COVERAGE_GCOV_PROG_WITH], - [:]) - AS_IF([test "X$GCOV" = "X:"], - [AC_MSG_ERROR([gcov is needed to do coverage])]) - AC_SUBST([GCOV]) - - dnl Check if gcc is being used - AS_IF([ test "$GCC" = "no" ], [ - AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage]) - ]) - - AC_CHECK_PROG([LCOV], [lcov], [lcov]) - AC_CHECK_PROG([GENHTML], [genhtml], [genhtml]) - - AS_IF([ test -z "$LCOV" ], [ - AC_MSG_ERROR([To enable code coverage reporting you must have lcov installed]) - ]) - - AS_IF([ test -z "$GENHTML" ], [ - AC_MSG_ERROR([Could not find genhtml from the lcov package]) - ]) - - dnl Build the code coverage flags - dnl Define CODE_COVERAGE_LDFLAGS for backwards compatibility - CODE_COVERAGE_CPPFLAGS="-DNDEBUG" - CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" - CODE_COVERAGE_CXXFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" - CODE_COVERAGE_LIBS="-lgcov" - CODE_COVERAGE_LDFLAGS="$CODE_COVERAGE_LIBS" - - AC_SUBST([CODE_COVERAGE_CPPFLAGS]) - AC_SUBST([CODE_COVERAGE_CFLAGS]) - AC_SUBST([CODE_COVERAGE_CXXFLAGS]) - AC_SUBST([CODE_COVERAGE_LIBS]) - AC_SUBST([CODE_COVERAGE_LDFLAGS]) - - [CODE_COVERAGE_RULES_CHECK=' - -$(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) -k check - $(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) code-coverage-capture -'] - [CODE_COVERAGE_RULES_CAPTURE=' - $(code_coverage_v_lcov_cap)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(call code_coverage_sanitize,$(PACKAGE_NAME)-$(PACKAGE_VERSION))" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_OPTIONS) - $(code_coverage_v_lcov_ign)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN) --output-file "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_RMOPTS) - -@rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp - $(code_coverage_v_genhtml)LANG=C $(GENHTML) $(code_coverage_quiet) $(addprefix --prefix ,$(CODE_COVERAGE_DIRECTORY)) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS) - @echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html" -'] - [CODE_COVERAGE_RULES_CLEAN=' -clean: code-coverage-clean -distclean: code-coverage-clean -code-coverage-clean: - -$(LCOV) --directory $(top_builddir) -z - -rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY) - -find . \( -name "*.gcda" -o -name "*.gcno" -o -name "*.gcov" \) -delete -'] - ], [ - [CODE_COVERAGE_RULES_CHECK=' - @echo "Need to reconfigure with --enable-code-coverage" -'] - CODE_COVERAGE_RULES_CAPTURE="$CODE_COVERAGE_RULES_CHECK" - CODE_COVERAGE_RULES_CLEAN='' - ]) - -[CODE_COVERAGE_RULES=' -# Code coverage -# -# Optional: -# - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting. -# Multiple directories may be specified, separated by whitespace. -# (Default: $(top_builddir)) -# - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated -# by lcov for code coverage. (Default: -# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info) -# - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage -# reports to be created. (Default: -# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage) -# - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage, -# set to 0 to disable it and leave empty to stay with the default. -# (Default: empty) -# - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov -# instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) -# - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov -# instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) -# - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov -# - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the -# collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) -# - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov -# instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) -# - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering -# lcov instance. (Default: empty) -# - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov -# instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) -# - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the -# genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) -# - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml -# instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) -# - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore -# -# The generated report will be titled using the $(PACKAGE_NAME) and -# $(PACKAGE_VERSION). In order to add the current git hash to the title, -# use the git-version-gen script, available online. - -# Optional variables -CODE_COVERAGE_DIRECTORY ?= $(top_builddir) -CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info -CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage -CODE_COVERAGE_BRANCH_COVERAGE ?= -CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ ---rc lcov_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) -CODE_COVERAGE_LCOV_SHOPTS ?= $(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) -CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)" -CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) -CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) -CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?= -CODE_COVERAGE_LCOV_RMOPTS ?= $(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) -CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\ -$(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ ---rc genhtml_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) -CODE_COVERAGE_GENHTML_OPTIONS ?= $(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) -CODE_COVERAGE_IGNORE_PATTERN ?= - -code_coverage_v_lcov_cap = $(code_coverage_v_lcov_cap_$(V)) -code_coverage_v_lcov_cap_ = $(code_coverage_v_lcov_cap_$(AM_DEFAULT_VERBOSITY)) -code_coverage_v_lcov_cap_0 = @echo " LCOV --capture"\ - $(CODE_COVERAGE_OUTPUT_FILE); -code_coverage_v_lcov_ign = $(code_coverage_v_lcov_ign_$(V)) -code_coverage_v_lcov_ign_ = $(code_coverage_v_lcov_ign_$(AM_DEFAULT_VERBOSITY)) -code_coverage_v_lcov_ign_0 = @echo " LCOV --remove /tmp/*"\ - $(CODE_COVERAGE_IGNORE_PATTERN); -code_coverage_v_genhtml = $(code_coverage_v_genhtml_$(V)) -code_coverage_v_genhtml_ = $(code_coverage_v_genhtml_$(AM_DEFAULT_VERBOSITY)) -code_coverage_v_genhtml_0 = @echo " GEN " $(CODE_COVERAGE_OUTPUT_DIRECTORY); -code_coverage_quiet = $(code_coverage_quiet_$(V)) -code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY)) -code_coverage_quiet_0 = --quiet - -# sanitizes the test-name: replaces with underscores: dashes and dots -code_coverage_sanitize = $(subst -,_,$(subst .,_,$(1))) - -# Use recursive makes in order to ignore errors during check -check-code-coverage:'"$CODE_COVERAGE_RULES_CHECK"' - -# Capture code coverage data -code-coverage-capture: code-coverage-capture-hook'"$CODE_COVERAGE_RULES_CAPTURE"' - -# Hook rule executed before code-coverage-capture, overridable by the user -code-coverage-capture-hook: - -'"$CODE_COVERAGE_RULES_CLEAN"' - -GITIGNOREFILES ?= -GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY) - -A''M_DISTCHECK_CONFIGURE_FLAGS ?= -A''M_DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage - -.PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean -'] - - AC_SUBST([CODE_COVERAGE_RULES]) - m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([CODE_COVERAGE_RULES])]) -]) diff -Nru hitori-3.22.4/m4/ax_compiler_flags_cflags.m4 hitori-3.31.0/m4/ax_compiler_flags_cflags.m4 --- hitori-3.22.4/m4/ax_compiler_flags_cflags.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_compiler_flags_cflags.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,140 +0,0 @@ -# ============================================================================= -# https://www.gnu.org/software/autoconf-archive/ax_compiler_flags_cflags.html -# ============================================================================= -# -# SYNOPSIS -# -# AX_COMPILER_FLAGS_CFLAGS([VARIABLE], [IS-RELEASE], [EXTRA-BASE-FLAGS], [EXTRA-YES-FLAGS]) -# -# DESCRIPTION -# -# Add warning flags for the C compiler to VARIABLE, which defaults to -# WARN_CFLAGS. VARIABLE is AC_SUBST-ed by this macro, but must be -# manually added to the CFLAGS variable for each target in the code base. -# -# This macro depends on the environment set up by AX_COMPILER_FLAGS. -# Specifically, it uses the value of $ax_enable_compile_warnings to decide -# which flags to enable. -# -# LICENSE -# -# Copyright (c) 2014, 2015 Philip Withnall -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. This file is offered as-is, without any -# warranty. - -#serial 14 - -AC_DEFUN([AX_COMPILER_FLAGS_CFLAGS],[ - AC_REQUIRE([AC_PROG_SED]) - AX_REQUIRE_DEFINED([AX_APPEND_COMPILE_FLAGS]) - AX_REQUIRE_DEFINED([AX_APPEND_FLAG]) - AX_REQUIRE_DEFINED([AX_CHECK_COMPILE_FLAG]) - - # Variable names - m4_define([ax_warn_cflags_variable], - [m4_normalize(ifelse([$1],,[WARN_CFLAGS],[$1]))]) - - AC_LANG_PUSH([C]) - - # Always pass -Werror=unknown-warning-option to get Clang to fail on bad - # flags, otherwise they are always appended to the warn_cflags variable, and - # Clang warns on them for every compilation unit. - # If this is passed to GCC, it will explode, so the flag must be enabled - # conditionally. - AX_CHECK_COMPILE_FLAG([-Werror=unknown-warning-option],[ - ax_compiler_flags_test="-Werror=unknown-warning-option" - ],[ - ax_compiler_flags_test="" - ]) - - # Check that -Wno-suggest-attribute=format is supported - AX_CHECK_COMPILE_FLAG([-Wno-suggest-attribute=format],[ - ax_compiler_no_suggest_attribute_flags="-Wno-suggest-attribute=format" - ],[ - ax_compiler_no_suggest_attribute_flags="" - ]) - - # Base flags - AX_APPEND_COMPILE_FLAGS([ dnl - -fno-strict-aliasing dnl - $3 dnl - ],ax_warn_cflags_variable,[$ax_compiler_flags_test]) - - AS_IF([test "$ax_enable_compile_warnings" != "no"],[ - # "yes" flags - AX_APPEND_COMPILE_FLAGS([ dnl - -Wall dnl - -Wextra dnl - -Wundef dnl - -Wnested-externs dnl - -Wwrite-strings dnl - -Wpointer-arith dnl - -Wmissing-declarations dnl - -Wmissing-prototypes dnl - -Wstrict-prototypes dnl - -Wredundant-decls dnl - -Wno-unused-parameter dnl - -Wno-missing-field-initializers dnl - -Wdeclaration-after-statement dnl - -Wformat=2 dnl - -Wold-style-definition dnl - -Wcast-align dnl - -Wformat-nonliteral dnl - -Wformat-security dnl - -Wsign-compare dnl - -Wstrict-aliasing dnl - -Wshadow dnl - -Winline dnl - -Wpacked dnl - -Wmissing-format-attribute dnl - -Wmissing-noreturn dnl - -Winit-self dnl - -Wredundant-decls dnl - -Wmissing-include-dirs dnl - -Wunused-but-set-variable dnl - -Warray-bounds dnl - -Wimplicit-function-declaration dnl - -Wreturn-type dnl - -Wswitch-enum dnl - -Wswitch-default dnl - $4 dnl - $5 dnl - $6 dnl - $7 dnl - ],ax_warn_cflags_variable,[$ax_compiler_flags_test]) - ]) - AS_IF([test "$ax_enable_compile_warnings" = "error"],[ - # "error" flags; -Werror has to be appended unconditionally because - # it's not possible to test for - # - # suggest-attribute=format is disabled because it gives too many false - # positives - AX_APPEND_FLAG([-Werror],ax_warn_cflags_variable) - - AX_APPEND_COMPILE_FLAGS([ dnl - [$ax_compiler_no_suggest_attribute_flags] dnl - ],ax_warn_cflags_variable,[$ax_compiler_flags_test]) - ]) - - # In the flags below, when disabling specific flags, always add *both* - # -Wno-foo and -Wno-error=foo. This fixes the situation where (for example) - # we enable -Werror, disable a flag, and a build bot passes CFLAGS=-Wall, - # which effectively turns that flag back on again as an error. - for flag in $ax_warn_cflags_variable; do - AS_CASE([$flag], - [-Wno-*=*],[], - [-Wno-*],[ - AX_APPEND_COMPILE_FLAGS([-Wno-error=$(AS_ECHO([$flag]) | $SED 's/^-Wno-//')], - ax_warn_cflags_variable, - [$ax_compiler_flags_test]) - ]) - done - - AC_LANG_POP([C]) - - # Substitute the variables - AC_SUBST(ax_warn_cflags_variable) -])dnl AX_COMPILER_FLAGS diff -Nru hitori-3.22.4/m4/ax_compiler_flags_gir.m4 hitori-3.31.0/m4/ax_compiler_flags_gir.m4 --- hitori-3.22.4/m4/ax_compiler_flags_gir.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_compiler_flags_gir.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,60 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_compiler_flags_gir.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_COMPILER_FLAGS_GIR([VARIABLE], [IS-RELEASE], [EXTRA-BASE-FLAGS], [EXTRA-YES-FLAGS]) -# -# DESCRIPTION -# -# Add warning flags for the g-ir-scanner (from GObject Introspection) to -# VARIABLE, which defaults to WARN_SCANNERFLAGS. VARIABLE is AC_SUBST-ed -# by this macro, but must be manually added to the SCANNERFLAGS variable -# for each GIR target in the code base. -# -# This macro depends on the environment set up by AX_COMPILER_FLAGS. -# Specifically, it uses the value of $ax_enable_compile_warnings to decide -# which flags to enable. -# -# LICENSE -# -# Copyright (c) 2015 Philip Withnall -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. This file is offered as-is, without any -# warranty. - -#serial 6 - -AC_DEFUN([AX_COMPILER_FLAGS_GIR],[ - AX_REQUIRE_DEFINED([AX_APPEND_FLAG]) - - # Variable names - m4_define([ax_warn_scannerflags_variable], - [m4_normalize(ifelse([$1],,[WARN_SCANNERFLAGS],[$1]))]) - - # Base flags - AX_APPEND_FLAG([$3],ax_warn_scannerflags_variable) - - AS_IF([test "$ax_enable_compile_warnings" != "no"],[ - # "yes" flags - AX_APPEND_FLAG([ dnl - --warn-all dnl - $4 dnl - $5 dnl - $6 dnl - $7 dnl - ],ax_warn_scannerflags_variable) - ]) - AS_IF([test "$ax_enable_compile_warnings" = "error"],[ - # "error" flags - AX_APPEND_FLAG([ dnl - --warn-error dnl - ],ax_warn_scannerflags_variable) - ]) - - # Substitute the variables - AC_SUBST(ax_warn_scannerflags_variable) -])dnl AX_COMPILER_FLAGS diff -Nru hitori-3.22.4/m4/ax_compiler_flags_ldflags.m4 hitori-3.31.0/m4/ax_compiler_flags_ldflags.m4 --- hitori-3.22.4/m4/ax_compiler_flags_ldflags.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_compiler_flags_ldflags.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,92 +0,0 @@ -# ============================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_compiler_flags_ldflags.html -# ============================================================================== -# -# SYNOPSIS -# -# AX_COMPILER_FLAGS_LDFLAGS([VARIABLE], [IS-RELEASE], [EXTRA-BASE-FLAGS], [EXTRA-YES-FLAGS]) -# -# DESCRIPTION -# -# Add warning flags for the linker to VARIABLE, which defaults to -# WARN_LDFLAGS. VARIABLE is AC_SUBST-ed by this macro, but must be -# manually added to the LDFLAGS variable for each target in the code base. -# -# This macro depends on the environment set up by AX_COMPILER_FLAGS. -# Specifically, it uses the value of $ax_enable_compile_warnings to decide -# which flags to enable. -# -# LICENSE -# -# Copyright (c) 2014, 2015 Philip Withnall -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. This file is offered as-is, without any -# warranty. - -#serial 8 - -AC_DEFUN([AX_COMPILER_FLAGS_LDFLAGS],[ - AX_REQUIRE_DEFINED([AX_APPEND_LINK_FLAGS]) - AX_REQUIRE_DEFINED([AX_APPEND_FLAG]) - AX_REQUIRE_DEFINED([AX_CHECK_COMPILE_FLAG]) - AX_REQUIRE_DEFINED([AX_CHECK_LINK_FLAG]) - - # Variable names - m4_define([ax_warn_ldflags_variable], - [m4_normalize(ifelse([$1],,[WARN_LDFLAGS],[$1]))]) - - # Always pass -Werror=unknown-warning-option to get Clang to fail on bad - # flags, otherwise they are always appended to the warn_ldflags variable, - # and Clang warns on them for every compilation unit. - # If this is passed to GCC, it will explode, so the flag must be enabled - # conditionally. - AX_CHECK_COMPILE_FLAG([-Werror=unknown-warning-option],[ - ax_compiler_flags_test="-Werror=unknown-warning-option" - ],[ - ax_compiler_flags_test="" - ]) - - # macOS linker does not have --as-needed - AX_CHECK_LINK_FLAG([-Wl,--no-as-needed], [ - ax_compiler_flags_as_needed_option="-Wl,--no-as-needed" - ], [ - ax_compiler_flags_as_needed_option="" - ]) - - # macOS linker speaks with a different accent - ax_compiler_flags_fatal_warnings_option="" - AX_CHECK_LINK_FLAG([-Wl,--fatal-warnings], [ - ax_compiler_flags_fatal_warnings_option="-Wl,--fatal-warnings" - ]) - AX_CHECK_LINK_FLAG([-Wl,-fatal_warnings], [ - ax_compiler_flags_fatal_warnings_option="-Wl,-fatal_warnings" - ]) - - # Base flags - AX_APPEND_LINK_FLAGS([ dnl - $ax_compiler_flags_as_needed_option dnl - $3 dnl - ],ax_warn_ldflags_variable,[$ax_compiler_flags_test]) - - AS_IF([test "$ax_enable_compile_warnings" != "no"],[ - # "yes" flags - AX_APPEND_LINK_FLAGS([$4 $5 $6 $7], - ax_warn_ldflags_variable, - [$ax_compiler_flags_test]) - ]) - AS_IF([test "$ax_enable_compile_warnings" = "error"],[ - # "error" flags; -Werror has to be appended unconditionally because - # it's not possible to test for - # - # suggest-attribute=format is disabled because it gives too many false - # positives - AX_APPEND_LINK_FLAGS([ dnl - $ax_compiler_flags_fatal_warnings_option dnl - ],ax_warn_ldflags_variable,[$ax_compiler_flags_test]) - ]) - - # Substitute the variables - AC_SUBST(ax_warn_ldflags_variable) -])dnl AX_COMPILER_FLAGS diff -Nru hitori-3.22.4/m4/ax_compiler_flags.m4 hitori-3.31.0/m4/ax_compiler_flags.m4 --- hitori-3.22.4/m4/ax_compiler_flags.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_compiler_flags.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,158 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_compiler_flags.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_COMPILER_FLAGS([CFLAGS-VARIABLE], [LDFLAGS-VARIABLE], [IS-RELEASE], [EXTRA-BASE-CFLAGS], [EXTRA-YES-CFLAGS], [UNUSED], [UNUSED], [UNUSED], [EXTRA-BASE-LDFLAGS], [EXTRA-YES-LDFLAGS], [UNUSED], [UNUSED], [UNUSED]) -# -# DESCRIPTION -# -# Check for the presence of an --enable-compile-warnings option to -# configure, defaulting to "error" in normal operation, or "yes" if -# IS-RELEASE is equal to "yes". Return the value in the variable -# $ax_enable_compile_warnings. -# -# Depending on the value of --enable-compile-warnings, different compiler -# warnings are checked to see if they work with the current compiler and, -# if so, are appended to CFLAGS-VARIABLE and LDFLAGS-VARIABLE. This -# allows a consistent set of baseline compiler warnings to be used across -# a code base, irrespective of any warnings enabled locally by individual -# developers. By standardising the warnings used by all developers of a -# project, the project can commit to a zero-warnings policy, using -Werror -# to prevent compilation if new warnings are introduced. This makes -# catching bugs which are flagged by warnings a lot easier. -# -# By providing a consistent --enable-compile-warnings argument across all -# projects using this macro, continuous integration systems can easily be -# configured the same for all projects. Automated systems or build -# systems aimed at beginners may want to pass the --disable-Werror -# argument to unconditionally prevent warnings being fatal. -# -# --enable-compile-warnings can take the values: -# -# * no: Base compiler warnings only; not even -Wall. -# * yes: The above, plus a broad range of useful warnings. -# * error: The above, plus -Werror so that all warnings are fatal. -# Use --disable-Werror to override this and disable fatal -# warnings. -# -# The set of base and enabled flags can be augmented using the -# EXTRA-*-CFLAGS and EXTRA-*-LDFLAGS variables, which are tested and -# appended to the output variable if --enable-compile-warnings is not -# "no". Flags should not be disabled using these arguments, as the entire -# point of AX_COMPILER_FLAGS is to enforce a consistent set of useful -# compiler warnings on code, using warnings which have been chosen for low -# false positive rates. If a compiler emits false positives for a -# warning, a #pragma should be used in the code to disable the warning -# locally. See: -# -# https://gcc.gnu.org/onlinedocs/gcc-4.9.2/gcc/Diagnostic-Pragmas.html#Diagnostic-Pragmas -# -# The EXTRA-* variables should only be used to supply extra warning flags, -# and not general purpose compiler flags, as they are controlled by -# configure options such as --disable-Werror. -# -# IS-RELEASE can be used to disable -Werror when making a release, which -# is useful for those hairy moments when you just want to get the release -# done as quickly as possible. Set it to "yes" to disable -Werror. By -# default, it uses the value of $ax_is_release, so if you are using the -# AX_IS_RELEASE macro, there is no need to pass this parameter. For -# example: -# -# AX_IS_RELEASE([git-directory]) -# AX_COMPILER_FLAGS() -# -# CFLAGS-VARIABLE defaults to WARN_CFLAGS, and LDFLAGS-VARIABLE defaults -# to WARN_LDFLAGS. Both variables are AC_SUBST-ed by this macro, but must -# be manually added to the CFLAGS and LDFLAGS variables for each target in -# the code base. -# -# If C++ language support is enabled with AC_PROG_CXX, which must occur -# before this macro in configure.ac, warning flags for the C++ compiler -# are AC_SUBST-ed as WARN_CXXFLAGS, and must be manually added to the -# CXXFLAGS variables for each target in the code base. EXTRA-*-CFLAGS can -# be used to augment the base and enabled flags. -# -# Warning flags for g-ir-scanner (from GObject Introspection) are -# AC_SUBST-ed as WARN_SCANNERFLAGS. This variable must be manually added -# to the SCANNERFLAGS variable for each GIR target in the code base. If -# extra g-ir-scanner flags need to be enabled, the AX_COMPILER_FLAGS_GIR -# macro must be invoked manually. -# -# AX_COMPILER_FLAGS may add support for other tools in future, in addition -# to the compiler and linker. No extra EXTRA-* variables will be added -# for those tools, and all extra support will still use the single -# --enable-compile-warnings configure option. For finer grained control -# over the flags for individual tools, use AX_COMPILER_FLAGS_CFLAGS, -# AX_COMPILER_FLAGS_LDFLAGS and AX_COMPILER_FLAGS_* for new tools. -# -# The UNUSED variables date from a previous version of this macro, and are -# automatically appended to the preceding non-UNUSED variable. They should -# be left empty in new uses of the macro. -# -# LICENSE -# -# Copyright (c) 2014, 2015 Philip Withnall -# Copyright (c) 2015 David King -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. This file is offered as-is, without any -# warranty. - -#serial 14 - -# _AX_COMPILER_FLAGS_LANG([LANGNAME]) -m4_defun([_AX_COMPILER_FLAGS_LANG], -[m4_ifdef([_AX_COMPILER_FLAGS_LANG_]$1[_enabled], [], - [m4_define([_AX_COMPILER_FLAGS_LANG_]$1[_enabled], [])dnl - AX_REQUIRE_DEFINED([AX_COMPILER_FLAGS_]$1[FLAGS])])dnl -]) - -AC_DEFUN([AX_COMPILER_FLAGS],[ - # C support is enabled by default. - _AX_COMPILER_FLAGS_LANG([C]) - # Only enable C++ support if AC_PROG_CXX is called. The redefinition of - # AC_PROG_CXX is so that a fatal error is emitted if this macro is called - # before AC_PROG_CXX, which would otherwise cause no C++ warnings to be - # checked. - AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AX_COMPILER_FLAGS_LANG([CXX])], - [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AX_COMPILER_FLAGS_LANG([CXX])])]) - AX_REQUIRE_DEFINED([AX_COMPILER_FLAGS_LDFLAGS]) - - # Default value for IS-RELEASE is $ax_is_release - ax_compiler_flags_is_release=m4_tolower(m4_normalize(ifelse([$3],, - [$ax_is_release], - [$3]))) - - AC_ARG_ENABLE([compile-warnings], - AS_HELP_STRING([--enable-compile-warnings=@<:@no/yes/error@:>@], - [Enable compiler warnings and errors]),, - [AS_IF([test "$ax_compiler_flags_is_release" = "yes"], - [enable_compile_warnings="yes"], - [enable_compile_warnings="error"])]) - AC_ARG_ENABLE([Werror], - AS_HELP_STRING([--disable-Werror], - [Unconditionally make all compiler warnings non-fatal]),, - [enable_Werror=maybe]) - - # Return the user's chosen warning level - AS_IF([test "$enable_Werror" = "no" -a \ - "$enable_compile_warnings" = "error"],[ - enable_compile_warnings="yes" - ]) - - ax_enable_compile_warnings=$enable_compile_warnings - - AX_COMPILER_FLAGS_CFLAGS([$1],[$ax_compiler_flags_is_release], - [$4],[$5 $6 $7 $8]) - m4_ifdef([_AX_COMPILER_FLAGS_LANG_CXX_enabled], - [AX_COMPILER_FLAGS_CXXFLAGS([WARN_CXXFLAGS], - [$ax_compiler_flags_is_release], - [$4],[$5 $6 $7 $8])]) - AX_COMPILER_FLAGS_LDFLAGS([$2],[$ax_compiler_flags_is_release], - [$9],[$10 $11 $12 $13]) - AX_COMPILER_FLAGS_GIR([WARN_SCANNERFLAGS],[$ax_compiler_flags_is_release]) -])dnl AX_COMPILER_FLAGS diff -Nru hitori-3.22.4/m4/ax_generate_changelog.m4 hitori-3.31.0/m4/ax_generate_changelog.m4 --- hitori-3.22.4/m4/ax_generate_changelog.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_generate_changelog.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,99 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_generate_changelog.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_GENERATE_CHANGELOG() -# -# DESCRIPTION -# -# Builds a rule for generating a ChangeLog file from version control -# system commit messages. Currently, the only supported VCS is git, but -# support for others could be added in future. -# -# Defines GENERATE_CHANGELOG_RULES which should be substituted in your -# Makefile. -# -# Usage example: -# -# configure.ac: -# -# AX_GENERATE_CHANGELOG -# -# Makefile.am: -# -# @GENERATE_CHANGELOG_RULES@ -# CHANGELOG_START = 0.2.3^ -# dist-hook: dist-ChangeLog -# -# ChangeLog (stub committed to VCS): -# -# The ChangeLog is auto-generated when releasing. -# If you are seeing this, use 'git log' for a detailed list of changes. -# -# This results in a "dist-ChangeLog" rule being added to the Makefile. -# When run, "dist-ChangeLog" will generate a ChangeLog in the -# $(top_distdir), using $(CHANGELOG_GIT_FLAGS) to format the output from -# "git log" being run in $(CHANGELOG_GIT_DIR). -# -# Unless Automake is initialised with the 'foreign' option, a dummy -# ChangeLog file must be committed to VCS in $(top_srcdir), containing the -# text above (for example). It will be substituted by the automatically -# generated ChangeLog during "make dist". -# -# LICENSE -# -# Copyright (c) 2015 David King -# Copyright (c) 2015 Philip Withnall -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. This file is offered as-is, without any -# warranty. - -#serial 3 - -AC_DEFUN([AX_GENERATE_CHANGELOG],[ - # Find git, defaulting to the 'missing' script so the user gets a nice - # message if git is missing, rather than a plain 'command not found'. - AC_PATH_PROG([GIT],[git],[${am_missing_run}git]) - AC_SUBST([GIT]) - - # Build the ChangeLog rules. - m4_pattern_allow([AM_V_GEN]) -GENERATE_CHANGELOG_RULES=' -# Generate ChangeLog -# -# Optional: -# - CHANGELOG_START: git commit ID or tag name to output changelogs from -# (exclusive). (Default: include all commits) -# - CHANGELOG_GIT_FLAGS: General flags to pass to git-log when generating the -# ChangeLog. (Default: various) -# - CHANGELOG_GIT_DIR: .git directory to use. (Default: $(top_srcdir)/.git) - -# git-specific -CHANGELOG_GIT_FLAGS ?= --stat -M -C --name-status --no-color --no-decorate -CHANGELOG_GIT_DIR ?= $(top_srcdir)/.git - -ifeq ($(CHANGELOG_START),) -CHANGELOG_GIT_RANGE = -else -CHANGELOG_GIT_RANGE = $(CHANGELOG_START).. -endif - -# Generate a ChangeLog in $(top_distdir) -dist-ChangeLog: - $(AM_V_GEN)if $(GIT) \ - --git-dir=$(CHANGELOG_GIT_DIR) --work-tree=$(top_srcdir) log \ - $(CHANGELOG_GIT_FLAGS) $(CHANGELOG_GIT_RANGE) \ - | fmt --split-only >.ChangeLog.tmp; \ - then mv -f .ChangeLog.tmp "$(top_distdir)/ChangeLog"; \ - else rm -f .ChangeLog.tmp; exit 1; fi - -.PHONY: dist-ChangeLog -' - - AC_SUBST([GENERATE_CHANGELOG_RULES]) - m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([GENERATE_CHANGELOG_RULES])]) -]) diff -Nru hitori-3.22.4/m4/ax_is_release.m4 hitori-3.31.0/m4/ax_is_release.m4 --- hitori-3.22.4/m4/ax_is_release.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_is_release.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,80 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_is_release.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_IS_RELEASE(POLICY) -# -# DESCRIPTION -# -# Determine whether the code is being configured as a release, or from -# git. Set the ax_is_release variable to 'yes' or 'no'. -# -# If building a release version, it is recommended that the configure -# script disable compiler errors and debug features, by conditionalising -# them on the ax_is_release variable. If building from git, these -# features should be enabled. -# -# The POLICY parameter specifies how ax_is_release is determined. It can -# take the following values: -# -# * git-directory: ax_is_release will be 'no' if a '.git' directory exists -# * minor-version: ax_is_release will be 'no' if the minor version number -# in $PACKAGE_VERSION is odd; this assumes -# $PACKAGE_VERSION follows the 'major.minor.micro' scheme -# * micro-version: ax_is_release will be 'no' if the micro version number -# in $PACKAGE_VERSION is odd; this assumes -# $PACKAGE_VERSION follows the 'major.minor.micro' scheme -# * dash-version: ax_is_release will be 'no' if there is a dash '-' -# in $PACKAGE_VERSION, for example 1.2-pre3, 1.2.42-a8b9 -# or 2.0-dirty (in particular this is suitable for use -# with git-version-gen) -# * always: ax_is_release will always be 'yes' -# * never: ax_is_release will always be 'no' -# -# Other policies may be added in future. -# -# LICENSE -# -# Copyright (c) 2015 Philip Withnall -# Copyright (c) 2016 Collabora Ltd. -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. - -#serial 7 - -AC_DEFUN([AX_IS_RELEASE],[ - AC_BEFORE([AC_INIT],[$0]) - - m4_case([$1], - [git-directory],[ - # $is_release = (.git directory does not exist) - AS_IF([test -d ${srcdir}/.git],[ax_is_release=no],[ax_is_release=yes]) - ], - [minor-version],[ - # $is_release = ($minor_version is even) - minor_version=`echo "$PACKAGE_VERSION" | sed 's/[[^.]][[^.]]*.\([[^.]][[^.]]*\).*/\1/'` - AS_IF([test "$(( $minor_version % 2 ))" -ne 0], - [ax_is_release=no],[ax_is_release=yes]) - ], - [micro-version],[ - # $is_release = ($micro_version is even) - micro_version=`echo "$PACKAGE_VERSION" | sed 's/[[^.]]*\.[[^.]]*\.\([[^.]]*\).*/\1/'` - AS_IF([test "$(( $micro_version % 2 ))" -ne 0], - [ax_is_release=no],[ax_is_release=yes]) - ], - [dash-version],[ - # $is_release = ($PACKAGE_VERSION has a dash) - AS_CASE([$PACKAGE_VERSION], - [*-*], [ax_is_release=no], - [*], [ax_is_release=yes]) - ], - [always],[ax_is_release=yes], - [never],[ax_is_release=no], - [ - AC_MSG_ERROR([Invalid policy. Valid policies: git-directory, minor-version, micro-version, dash-version, always, never.]) - ]) -]) diff -Nru hitori-3.22.4/m4/ax_require_defined.m4 hitori-3.31.0/m4/ax_require_defined.m4 --- hitori-3.22.4/m4/ax_require_defined.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/ax_require_defined.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ -# =========================================================================== -# https://www.gnu.org/software/autoconf-archive/ax_require_defined.html -# =========================================================================== -# -# SYNOPSIS -# -# AX_REQUIRE_DEFINED(MACRO) -# -# DESCRIPTION -# -# AX_REQUIRE_DEFINED is a simple helper for making sure other macros have -# been defined and thus are available for use. This avoids random issues -# where a macro isn't expanded. Instead the configure script emits a -# non-fatal: -# -# ./configure: line 1673: AX_CFLAGS_WARN_ALL: command not found -# -# It's like AC_REQUIRE except it doesn't expand the required macro. -# -# Here's an example: -# -# AX_REQUIRE_DEFINED([AX_CHECK_LINK_FLAG]) -# -# LICENSE -# -# Copyright (c) 2014 Mike Frysinger -# -# Copying and distribution of this file, with or without modification, are -# permitted in any medium without royalty provided the copyright notice -# and this notice are preserved. This file is offered as-is, without any -# warranty. - -#serial 2 - -AC_DEFUN([AX_REQUIRE_DEFINED], [dnl - m4_ifndef([$1], [m4_fatal([macro ]$1[ is not defined; is a m4 file missing?])]) -])dnl AX_REQUIRE_DEFINED diff -Nru hitori-3.22.4/m4/gettext.m4 hitori-3.31.0/m4/gettext.m4 --- hitori-3.22.4/m4/gettext.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/gettext.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,420 +0,0 @@ -# gettext.m4 serial 68 (gettext-0.19.8) -dnl Copyright (C) 1995-2014, 2016 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2006, 2008-2010. - -dnl Macro to add for using GNU gettext. - -dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). -dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The -dnl default (if it is not specified or empty) is 'no-libtool'. -dnl INTLSYMBOL should be 'external' for packages with no intl directory, -dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. -dnl If INTLSYMBOL is 'use-libtool', then a libtool library -dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, -dnl depending on --{enable,disable}-{shared,static} and on the presence of -dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library -dnl $(top_builddir)/intl/libintl.a will be created. -dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext -dnl implementations (in libc or libintl) without the ngettext() function -dnl will be ignored. If NEEDSYMBOL is specified and is -dnl 'need-formatstring-macros', then GNU gettext implementations that don't -dnl support the ISO C 99 formatstring macros will be ignored. -dnl INTLDIR is used to find the intl libraries. If empty, -dnl the value '$(top_builddir)/intl/' is used. -dnl -dnl The result of the configuration is one of three cases: -dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled -dnl and used. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 2) GNU gettext has been found in the system's C library. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 3) No internationalization, always use English msgid. -dnl Catalog format: none -dnl Catalog extension: none -dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. -dnl The use of .gmo is historical (it was needed to avoid overwriting the -dnl GNU format catalogs when building on a platform with an X/Open gettext), -dnl but we keep it in order not to force irrelevant filename changes on the -dnl maintainers. -dnl -AC_DEFUN([AM_GNU_GETTEXT], -[ - dnl Argument checking. - ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , - [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT -])])])])]) - ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old], - [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])]) - ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , - [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT -])])])]) - define([gt_included_intl], - ifelse([$1], [external], - ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]), - [yes])) - define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], [])) - gt_NEEDS_INIT - AM_GNU_GETTEXT_NEED([$2]) - - AC_REQUIRE([AM_PO_SUBDIRS])dnl - ifelse(gt_included_intl, yes, [ - AC_REQUIRE([AM_INTL_SUBDIR])dnl - ]) - - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Sometimes libintl requires libiconv, so first search for libiconv. - dnl Ideally we would do this search only after the - dnl if test "$USE_NLS" = "yes"; then - dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT - dnl the configure script would need to contain the same shell code - dnl again, outside any 'if'. There are two solutions: - dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. - dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. - dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not - dnl documented, we avoid it. - ifelse(gt_included_intl, yes, , [ - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - ]) - - dnl Sometimes, on Mac OS X, libintl requires linking with CoreFoundation. - gt_INTL_MACOSX - - dnl Set USE_NLS. - AC_REQUIRE([AM_NLS]) - - ifelse(gt_included_intl, yes, [ - BUILD_INCLUDED_LIBINTL=no - USE_INCLUDED_LIBINTL=no - ]) - LIBINTL= - LTLIBINTL= - POSUB= - - dnl Add a version number to the cache macros. - case " $gt_needs " in - *" need-formatstring-macros "*) gt_api_version=3 ;; - *" need-ngettext "*) gt_api_version=2 ;; - *) gt_api_version=1 ;; - esac - gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" - gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" - - dnl If we use NLS figure out what method - if test "$USE_NLS" = "yes"; then - gt_use_preinstalled_gnugettext=no - ifelse(gt_included_intl, yes, [ - AC_MSG_CHECKING([whether included gettext is requested]) - AC_ARG_WITH([included-gettext], - [ --with-included-gettext use the GNU gettext library included here], - nls_cv_force_use_gnu_gettext=$withval, - nls_cv_force_use_gnu_gettext=no) - AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext]) - - nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" - if test "$nls_cv_force_use_gnu_gettext" != "yes"; then - ]) - dnl User does not insist on using GNU NLS library. Figure out what - dnl to use. If GNU gettext is available we use this. Else we have - dnl to fall back to GNU NLS library. - - if test $gt_api_version -ge 3; then - gt_revision_test_code=' -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -changequote(,)dnl -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -changequote([,])dnl -' - else - gt_revision_test_code= - fi - if test $gt_api_version -ge 2; then - gt_expression_test_code=' + * ngettext ("", "", 0)' - else - gt_expression_test_code= - fi - - AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc], - [AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -extern int _nl_msg_cat_cntr; -extern int *_nl_domain_bindings; -#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings) -#else -#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 -#endif -$gt_revision_test_code - ]], - [[ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION - ]])], - [eval "$gt_func_gnugettext_libc=yes"], - [eval "$gt_func_gnugettext_libc=no"])]) - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - dnl Sometimes libintl requires libiconv, so first search for libiconv. - ifelse(gt_included_intl, yes, , [ - AM_ICONV_LINK - ]) - dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL - dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) - dnl because that would add "-liconv" to LIBINTL and LTLIBINTL - dnl even if libiconv doesn't exist. - AC_LIB_LINKFLAGS_BODY([intl]) - AC_CACHE_CHECK([for GNU gettext in libintl], - [$gt_func_gnugettext_libintl], - [gt_save_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $INCINTL" - gt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBINTL" - dnl Now see whether libintl exists and does not depend on libiconv. - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); -#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) -#else -#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 -#endif -$gt_revision_test_code - ]], - [[ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION - ]])], - [eval "$gt_func_gnugettext_libintl=yes"], - [eval "$gt_func_gnugettext_libintl=no"]) - dnl Now see whether libintl exists and depends on libiconv. - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then - LIBS="$LIBS $LIBICONV" - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); -#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) -#else -#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 -#endif -$gt_revision_test_code - ]], - [[ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION - ]])], - [LIBINTL="$LIBINTL $LIBICONV" - LTLIBINTL="$LTLIBINTL $LTLIBICONV" - eval "$gt_func_gnugettext_libintl=yes" - ]) - fi - CPPFLAGS="$gt_save_CPPFLAGS" - LIBS="$gt_save_LIBS"]) - fi - - dnl If an already present or preinstalled GNU gettext() is found, - dnl use it. But if this macro is used in GNU gettext, and GNU - dnl gettext is already preinstalled in libintl, we update this - dnl libintl. (Cf. the install rule in intl/Makefile.in.) - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ - || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ - && test "$PACKAGE" != gettext-runtime \ - && test "$PACKAGE" != gettext-tools; }; then - gt_use_preinstalled_gnugettext=yes - else - dnl Reset the values set by searching for libintl. - LIBINTL= - LTLIBINTL= - INCINTL= - fi - - ifelse(gt_included_intl, yes, [ - if test "$gt_use_preinstalled_gnugettext" != "yes"; then - dnl GNU gettext is not found in the C library. - dnl Fall back on included GNU gettext library. - nls_cv_use_gnu_gettext=yes - fi - fi - - if test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions used to generate GNU NLS library. - BUILD_INCLUDED_LIBINTL=yes - USE_INCLUDED_LIBINTL=yes - LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD" - LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD" - LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` - fi - - CATOBJEXT= - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions to use GNU gettext tools. - CATOBJEXT=.gmo - fi - ]) - - if test -n "$INTL_MACOSX_LIBS"; then - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Some extra flags are needed during linking. - LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" - LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" - fi - fi - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - AC_DEFINE([ENABLE_NLS], [1], - [Define to 1 if translation of program messages to the user's native language - is requested.]) - else - USE_NLS=no - fi - fi - - AC_MSG_CHECKING([whether to use NLS]) - AC_MSG_RESULT([$USE_NLS]) - if test "$USE_NLS" = "yes"; then - AC_MSG_CHECKING([where the gettext function comes from]) - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - gt_source="external libintl" - else - gt_source="libc" - fi - else - gt_source="included intl directory" - fi - AC_MSG_RESULT([$gt_source]) - fi - - if test "$USE_NLS" = "yes"; then - - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - AC_MSG_CHECKING([how to link with libintl]) - AC_MSG_RESULT([$LIBINTL]) - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) - fi - - dnl For backward compatibility. Some packages may be using this. - AC_DEFINE([HAVE_GETTEXT], [1], - [Define if the GNU gettext() function is already present or preinstalled.]) - AC_DEFINE([HAVE_DCGETTEXT], [1], - [Define if the GNU dcgettext() function is already present or preinstalled.]) - fi - - dnl We need to process the po/ directory. - POSUB=po - fi - - ifelse(gt_included_intl, yes, [ - dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL - dnl to 'yes' because some of the testsuite requires it. - if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then - BUILD_INCLUDED_LIBINTL=yes - fi - - dnl Make all variables we use known to autoconf. - AC_SUBST([BUILD_INCLUDED_LIBINTL]) - AC_SUBST([USE_INCLUDED_LIBINTL]) - AC_SUBST([CATOBJEXT]) - - dnl For backward compatibility. Some configure.ins may be using this. - nls_cv_header_intl= - nls_cv_header_libgt= - - dnl For backward compatibility. Some Makefiles may be using this. - DATADIRNAME=share - AC_SUBST([DATADIRNAME]) - - dnl For backward compatibility. Some Makefiles may be using this. - INSTOBJEXT=.mo - AC_SUBST([INSTOBJEXT]) - - dnl For backward compatibility. Some Makefiles may be using this. - GENCAT=gencat - AC_SUBST([GENCAT]) - - dnl For backward compatibility. Some Makefiles may be using this. - INTLOBJS= - if test "$USE_INCLUDED_LIBINTL" = yes; then - INTLOBJS="\$(GETTOBJS)" - fi - AC_SUBST([INTLOBJS]) - - dnl Enable libtool support if the surrounding package wishes it. - INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix - AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX]) - ]) - - dnl For backward compatibility. Some Makefiles may be using this. - INTLLIBS="$LIBINTL" - AC_SUBST([INTLLIBS]) - - dnl Make all documented variables known to autoconf. - AC_SUBST([LIBINTL]) - AC_SUBST([LTLIBINTL]) - AC_SUBST([POSUB]) -]) - - -dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized. -m4_define([gt_NEEDS_INIT], -[ - m4_divert_text([DEFAULTS], [gt_needs=]) - m4_define([gt_NEEDS_INIT], []) -]) - - -dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL]) -AC_DEFUN([AM_GNU_GETTEXT_NEED], -[ - m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"]) -]) - - -dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) -AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) - - -dnl Usage: AM_GNU_GETTEXT_REQUIRE_VERSION([gettext-version]) -AC_DEFUN([AM_GNU_GETTEXT_REQUIRE_VERSION], []) diff -Nru hitori-3.22.4/m4/gsettings.m4 hitori-3.31.0/m4/gsettings.m4 --- hitori-3.22.4/m4/gsettings.m4 2016-12-20 13:31:44.000000000 +0000 +++ hitori-3.31.0/m4/gsettings.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,83 +0,0 @@ -dnl GLIB_GSETTINGS -dnl Defines GSETTINGS_SCHEMAS_INSTALL which controls whether -dnl the schema should be compiled -dnl - -AC_DEFUN([GLIB_GSETTINGS], -[ - m4_pattern_allow([AM_V_GEN]) - AC_ARG_ENABLE(schemas-compile, - AS_HELP_STRING([--disable-schemas-compile], - [Disable regeneration of gschemas.compiled on install]), - [case ${enableval} in - yes) GSETTINGS_DISABLE_SCHEMAS_COMPILE="" ;; - no) GSETTINGS_DISABLE_SCHEMAS_COMPILE="1" ;; - *) AC_MSG_ERROR([bad value ${enableval} for --enable-schemas-compile]) ;; - esac]) - AC_SUBST([GSETTINGS_DISABLE_SCHEMAS_COMPILE]) - PKG_PROG_PKG_CONFIG([0.16]) - AC_SUBST(gsettingsschemadir, [${datadir}/glib-2.0/schemas]) - if test x$cross_compiling != xyes; then - GLIB_COMPILE_SCHEMAS=`$PKG_CONFIG --variable glib_compile_schemas gio-2.0` - else - AC_PATH_PROG(GLIB_COMPILE_SCHEMAS, glib-compile-schemas) - fi - AC_SUBST(GLIB_COMPILE_SCHEMAS) - if test "x$GLIB_COMPILE_SCHEMAS" = "x"; then - ifelse([$2],,[AC_MSG_ERROR([glib-compile-schemas not found.])],[$2]) - else - ifelse([$1],,[:],[$1]) - fi - - GSETTINGS_RULES=' -.PHONY : uninstall-gsettings-schemas install-gsettings-schemas clean-gsettings-schemas - -mostlyclean-am: clean-gsettings-schemas - -gsettings__enum_file = $(addsuffix .enums.xml,$(gsettings_ENUM_NAMESPACE)) - -%.gschema.valid: %.gschema.xml $(gsettings__enum_file) - $(AM_V_GEN) $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$< && mkdir -p [$](@D) && touch [$]@ - -all-am: $(gsettings_SCHEMAS:.xml=.valid) -uninstall-am: uninstall-gsettings-schemas -install-data-am: install-gsettings-schemas - -.SECONDARY: $(gsettings_SCHEMAS) - -install-gsettings-schemas: $(gsettings_SCHEMAS) $(gsettings__enum_file) - @$(NORMAL_INSTALL) - if test -n "$^"; then \ - test -z "$(gsettingsschemadir)" || $(MKDIR_P) "$(DESTDIR)$(gsettingsschemadir)"; \ - $(INSTALL_DATA) $^ "$(DESTDIR)$(gsettingsschemadir)"; \ - test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir); \ - fi - -uninstall-gsettings-schemas: - @$(NORMAL_UNINSTALL) - @list='\''$(gsettings_SCHEMAS) $(gsettings__enum_file)'\''; test -n "$(gsettingsschemadir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e '\''s|^.*/||'\''`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '\''$(DESTDIR)$(gsettingsschemadir)'\'' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(gsettingsschemadir)" && rm -f $$files - test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir) - -clean-gsettings-schemas: - rm -f $(gsettings_SCHEMAS:.xml=.valid) $(gsettings__enum_file) - -ifdef gsettings_ENUM_NAMESPACE -$(gsettings__enum_file): $(gsettings_ENUM_FILES) - $(AM_V_GEN) glib-mkenums --comments '\'''\'' --fhead "" --vhead " <@type@ id='\''$(gsettings_ENUM_NAMESPACE).@EnumName@'\''>" --vprod " " --vtail " " --ftail "" [$]^ > [$]@.tmp && mv [$]@.tmp [$]@ -endif -' - _GSETTINGS_SUBST(GSETTINGS_RULES) -]) - -dnl _GSETTINGS_SUBST(VARIABLE) -dnl Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST -AC_DEFUN([_GSETTINGS_SUBST], -[ -AC_SUBST([$1]) -m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) -] -) diff -Nru hitori-3.22.4/m4/iconv.m4 hitori-3.31.0/m4/iconv.m4 --- hitori-3.22.4/m4/iconv.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/iconv.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,271 +0,0 @@ -# iconv.m4 serial 19 (gettext-0.18.2) -dnl Copyright (C) 2000-2002, 2007-2014, 2016 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], -[ - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([iconv]) -]) - -AC_DEFUN([AM_ICONV_LINK], -[ - dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and - dnl those with the standalone portable GNU libiconv installed). - AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - - dnl Add $INCICONV to CPPFLAGS before performing the following checks, - dnl because if the user has installed libiconv and not disabled its use - dnl via --without-libiconv-prefix, he wants to use it. The first - dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed. - am_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) - - AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [ - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -#include - ]], - [[iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);]])], - [am_cv_func_iconv=yes]) - if test "$am_cv_func_iconv" != yes; then - am_save_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -#include - ]], - [[iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);]])], - [am_cv_lib_iconv=yes] - [am_cv_func_iconv=yes]) - LIBS="$am_save_LIBS" - fi - ]) - if test "$am_cv_func_iconv" = yes; then - AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [ - dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11, - dnl Solaris 10. - am_save_LIBS="$LIBS" - if test $am_cv_lib_iconv = yes; then - LIBS="$LIBS $LIBICONV" - fi - am_cv_func_iconv_works=no - for ac_iconv_const in '' 'const'; do - AC_RUN_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -#include - -#ifndef ICONV_CONST -# define ICONV_CONST $ac_iconv_const -#endif - ]], - [[int result = 0; - /* Test against AIX 5.1 bug: Failures are not distinguishable from successful - returns. */ - { - iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); - if (cd_utf8_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_utf8_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 1; - iconv_close (cd_utf8_to_88591); - } - } - /* Test against Solaris 10 bug: Failures are not distinguishable from - successful returns. */ - { - iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); - if (cd_ascii_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\263"; - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_ascii_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 2; - iconv_close (cd_ascii_to_88591); - } - } - /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304"; - static char buf[2] = { (char)0xDE, (char)0xAD }; - ICONV_CONST char *inptr = input; - size_t inbytesleft = 1; - char *outptr = buf; - size_t outbytesleft = 1; - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) - result |= 4; - iconv_close (cd_88591_to_utf8); - } - } -#if 0 /* This bug could be worked around by the caller. */ - /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; - char buf[50]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if ((int)res > 0) - result |= 8; - iconv_close (cd_88591_to_utf8); - } - } -#endif - /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is - provided. */ - if (/* Try standardized names. */ - iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) - /* Try IRIX, OSF/1 names. */ - && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) - /* Try AIX names. */ - && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) - /* Try HP-UX names. */ - && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) - result |= 16; - return result; -]])], - [am_cv_func_iconv_works=yes], , - [case "$host_os" in - aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; - *) am_cv_func_iconv_works="guessing yes" ;; - esac]) - test "$am_cv_func_iconv_works" = no || break - done - LIBS="$am_save_LIBS" - ]) - case "$am_cv_func_iconv_works" in - *no) am_func_iconv=no am_cv_lib_iconv=no ;; - *) am_func_iconv=yes ;; - esac - else - am_func_iconv=no am_cv_lib_iconv=no - fi - if test "$am_func_iconv" = yes; then - AC_DEFINE([HAVE_ICONV], [1], - [Define if you have the iconv() function and it works.]) - fi - if test "$am_cv_lib_iconv" = yes; then - AC_MSG_CHECKING([how to link with libiconv]) - AC_MSG_RESULT([$LIBICONV]) - else - dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV - dnl either. - CPPFLAGS="$am_save_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - AC_SUBST([LIBICONV]) - AC_SUBST([LTLIBICONV]) -]) - -dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to -dnl avoid warnings like -dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required". -dnl This is tricky because of the way 'aclocal' is implemented: -dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN. -dnl Otherwise aclocal's initial scan pass would miss the macro definition. -dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions. -dnl Otherwise aclocal would emit many "Use of uninitialized value $1" -dnl warnings. -m4_define([gl_iconv_AC_DEFUN], - m4_version_prereq([2.64], - [[AC_DEFUN_ONCE( - [$1], [$2])]], - [m4_ifdef([gl_00GNULIB], - [[AC_DEFUN_ONCE( - [$1], [$2])]], - [[AC_DEFUN( - [$1], [$2])]])])) -gl_iconv_AC_DEFUN([AM_ICONV], -[ - AM_ICONV_LINK - if test "$am_cv_func_iconv" = yes; then - AC_MSG_CHECKING([for iconv declaration]) - AC_CACHE_VAL([am_cv_proto_iconv], [ - AC_COMPILE_IFELSE( - [AC_LANG_PROGRAM( - [[ -#include -#include -extern -#ifdef __cplusplus -"C" -#endif -#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus) -size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); -#else -size_t iconv(); -#endif - ]], - [[]])], - [am_cv_proto_iconv_arg1=""], - [am_cv_proto_iconv_arg1="const"]) - am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) - am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` - AC_MSG_RESULT([ - $am_cv_proto_iconv]) - AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1], - [Define as const if the declaration of iconv() needs const.]) - dnl Also substitute ICONV_CONST in the gnulib generated . - m4_ifdef([gl_ICONV_H_DEFAULTS], - [AC_REQUIRE([gl_ICONV_H_DEFAULTS]) - if test -n "$am_cv_proto_iconv_arg1"; then - ICONV_CONST="const" - fi - ]) - fi -]) diff -Nru hitori-3.22.4/m4/intlmacosx.m4 hitori-3.31.0/m4/intlmacosx.m4 --- hitori-3.22.4/m4/intlmacosx.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/intlmacosx.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,56 +0,0 @@ -# intlmacosx.m4 serial 5 (gettext-0.18.2) -dnl Copyright (C) 2004-2014, 2016 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Checks for special options needed on Mac OS X. -dnl Defines INTL_MACOSX_LIBS. -AC_DEFUN([gt_INTL_MACOSX], -[ - dnl Check for API introduced in Mac OS X 10.2. - AC_CACHE_CHECK([for CFPreferencesCopyAppValue], - [gt_cv_func_CFPreferencesCopyAppValue], - [gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[#include ]], - [[CFPreferencesCopyAppValue(NULL, NULL)]])], - [gt_cv_func_CFPreferencesCopyAppValue=yes], - [gt_cv_func_CFPreferencesCopyAppValue=no]) - LIBS="$gt_save_LIBS"]) - if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then - AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1], - [Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework.]) - fi - dnl Check for API introduced in Mac OS X 10.3. - AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent], - [gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - AC_LINK_IFELSE( - [AC_LANG_PROGRAM( - [[#include ]], - [[CFLocaleCopyCurrent();]])], - [gt_cv_func_CFLocaleCopyCurrent=yes], - [gt_cv_func_CFLocaleCopyCurrent=no]) - LIBS="$gt_save_LIBS"]) - if test $gt_cv_func_CFLocaleCopyCurrent = yes; then - AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1], - [Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the CoreFoundation framework.]) - fi - INTL_MACOSX_LIBS= - if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then - INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" - fi - AC_SUBST([INTL_MACOSX_LIBS]) -]) diff -Nru hitori-3.22.4/m4/lib-ld.m4 hitori-3.31.0/m4/lib-ld.m4 --- hitori-3.22.4/m4/lib-ld.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/lib-ld.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,119 +0,0 @@ -# lib-ld.m4 serial 6 -dnl Copyright (C) 1996-2003, 2009-2016 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl Subroutines of libtool.m4, -dnl with replacements s/_*LT_PATH/AC_LIB_PROG/ and s/lt_/acl_/ to avoid -dnl collision with libtool.m4. - -dnl From libtool-2.4. Sets the variable with_gnu_ld to yes or no. -AC_DEFUN([AC_LIB_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld], -[# I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 /dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'` - while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL([acl_cv_path_LD], -[if test -z "$LD"; then - acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$acl_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 = 1.10 to complain if config.rpath is missing. - m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) - AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS - AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld - AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host - AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir - AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [ - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - ]) - wl="$acl_cv_wl" - acl_libext="$acl_cv_libext" - acl_shlibext="$acl_cv_shlibext" - acl_libname_spec="$acl_cv_libname_spec" - acl_library_names_spec="$acl_cv_library_names_spec" - acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - acl_hardcode_direct="$acl_cv_hardcode_direct" - acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" - dnl Determine whether the user wants rpath handling at all. - AC_ARG_ENABLE([rpath], - [ --disable-rpath do not hardcode runtime library paths], - :, enable_rpath=yes) -]) - -dnl AC_LIB_FROMPACKAGE(name, package) -dnl declares that libname comes from the given package. The configure file -dnl will then not have a --with-libname-prefix option but a -dnl --with-package-prefix option. Several libraries can come from the same -dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar -dnl macro call that searches for libname. -AC_DEFUN([AC_LIB_FROMPACKAGE], -[ - pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - define([acl_frompackage_]NAME, [$2]) - popdef([NAME]) - pushdef([PACK],[$2]) - pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - define([acl_libsinpackage_]PACKUP, - m4_ifdef([acl_libsinpackage_]PACKUP, [m4_defn([acl_libsinpackage_]PACKUP)[, ]],)[lib$1]) - popdef([PACKUP]) - popdef([PACK]) -]) - -dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. -dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found -dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_LINKFLAGS_BODY], -[ - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])]) - pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])]) - pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])]) - dnl Autoconf >= 2.61 supports dots in --with options. - pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[m4_translit(PACK,[.],[_])],PACK)]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_ARG_WITH(P_A_C_K[-prefix], -[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib - --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - if test "$acl_libdirstem2" != "$acl_libdirstem" \ - && ! test -d "$withval/$acl_libdirstem"; then - additional_libdir="$withval/$acl_libdirstem2" - fi - fi - fi -]) - dnl Search the library and its dependencies in $additional_libdir and - dnl $LDFLAGS. Using breadth-first-seach. - LIB[]NAME= - LTLIB[]NAME= - INC[]NAME= - LIB[]NAME[]_PREFIX= - dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been - dnl computed. So it has to be reset here. - HAVE_LIB[]NAME= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='$1 $2' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - dnl See if it was already located by an earlier AC_LIB_LINKFLAGS - dnl or AC_LIB_HAVE_LINKFLAGS call. - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" - else - dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined - dnl that this library doesn't exist. So just drop it. - : - fi - else - dnl Search the library lib$name in $additional_libdir and $LDFLAGS - dnl and the already constructed $LIBNAME/$LTLIBNAME. - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - dnl The same code as in the loop below: - dnl First look for a shared library. - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - dnl Then look for a static library. - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - dnl First look for a shared library. - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - dnl Then look for a static library. - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - dnl Found the library. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - dnl Linking with a shared library. We attempt to hardcode its - dnl directory into the executable's runpath, unless it's the - dnl standard /usr/lib. - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then - dnl No hardcoding is needed. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - dnl The hardcoding into $LIBNAME is system dependent. - if test "$acl_hardcode_direct" = yes; then - dnl Using DIR/libNAME.so during linking hardcodes DIR into the - dnl resulting binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - dnl Rely on "-L$found_dir". - dnl But don't add it if it's already contained in the LDFLAGS - dnl or the already constructed $LIBNAME - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH - dnl here, because this doesn't fit in flags passed to the - dnl compiler. So give up. No hardcoding. This affects only - dnl very old systems. - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - dnl Linking with a static library. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" - else - dnl We shouldn't come here, but anyway it's good to have a - dnl fallback. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" - fi - fi - dnl Assume the include files are nearby. - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = '$1'; then - LIB[]NAME[]_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = '$1'; then - LIB[]NAME[]_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - dnl Potentially add $additional_includedir to $INCNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's /usr/local/include and we are using GCC on Linux, - dnl 3. if it's already present in $CPPFLAGS or the already - dnl constructed $INCNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INC[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $INCNAME. - INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - dnl Look for dependencies. - if test -n "$found_la"; then - dnl Read the .la file. It defines the variables - dnl dlname, library_names, old_library, dependency_libs, current, - dnl age, revision, installed, dlopen, dlpreopen, libdir. - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - dnl We use only dependency_libs. - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's /usr/local/lib and we are using GCC on Linux, - dnl 3. if it's already present in $LDFLAGS or the already - dnl constructed $LIBNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LIBNAME. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LTLIBNAME. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - dnl Handle this in the next round. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - dnl Handle this in the next round. Throw away the .la's - dnl directory; it is already contained in a preceding -L - dnl option. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - dnl Most likely an immediate library name. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" - ;; - esac - done - fi - else - dnl Didn't find the library; assume it is in the system directories - dnl known to the linker and runtime loader. (All the system - dnl directories known to the linker should also be known to the - dnl runtime loader, otherwise the system is severely misconfigured.) - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user must - dnl pass all path elements in one option. We can arrange that for a - dnl single library, but not when more than one $LIBNAMEs are used. - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - else - dnl The -rpath options are cumulative. - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - dnl When using libtool, the option that works for both libraries and - dnl executables is -R. The -R options are cumulative. - for found_dir in $ltrpathdirs; do - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" - done - fi - popdef([P_A_C_K]) - popdef([PACKLIBS]) - popdef([PACKUP]) - popdef([PACK]) - popdef([NAME]) -]) - -dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, -dnl unless already present in VAR. -dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes -dnl contains two or three consecutive elements that belong together. -AC_DEFUN([AC_LIB_APPENDTOVAR], -[ - for element in [$2]; do - haveit= - for x in $[$1]; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - [$1]="${[$1]}${[$1]:+ }$element" - fi - done -]) - -dnl For those cases where a variable contains several -L and -l options -dnl referring to unknown libraries and directories, this macro determines the -dnl necessary additional linker options for the runtime path. -dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) -dnl sets LDADDVAR to linker options needed together with LIBSVALUE. -dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, -dnl otherwise linking without libtool is assumed. -AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], -[ - AC_REQUIRE([AC_LIB_RPATH]) - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - $1= - if test "$enable_rpath" != no; then - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode directories into the resulting - dnl binary. - rpathdirs= - next= - for opt in $2; do - if test -n "$next"; then - dir="$next" - dnl No need to hardcode the standard /usr/lib. - if test "X$dir" != "X/usr/$acl_libdirstem" \ - && test "X$dir" != "X/usr/$acl_libdirstem2"; then - rpathdirs="$rpathdirs $dir" - fi - next= - else - case $opt in - -L) next=yes ;; - -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` - dnl No need to hardcode the standard /usr/lib. - if test "X$dir" != "X/usr/$acl_libdirstem" \ - && test "X$dir" != "X/usr/$acl_libdirstem2"; then - rpathdirs="$rpathdirs $dir" - fi - next= ;; - *) next= ;; - esac - fi - done - if test "X$rpathdirs" != "X"; then - if test -n ""$3""; then - dnl libtool is used for linking. Use -R options. - for dir in $rpathdirs; do - $1="${$1}${$1:+ }-R$dir" - done - else - dnl The linker is used for linking directly. - if test -n "$acl_hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user - dnl must pass all path elements in one option. - alldirs= - for dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - $1="$flag" - else - dnl The -rpath options are cumulative. - for dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - $1="${$1}${$1:+ }$flag" - done - fi - fi - fi - fi - fi - AC_SUBST([$1]) -]) diff -Nru hitori-3.22.4/m4/lib-prefix.m4 hitori-3.31.0/m4/lib-prefix.m4 --- hitori-3.22.4/m4/lib-prefix.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/lib-prefix.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,224 +0,0 @@ -# lib-prefix.m4 serial 7 (gettext-0.18) -dnl Copyright (C) 2001-2005, 2008-2016 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and -dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't -dnl require excessive bracketing. -ifdef([AC_HELP_STRING], -[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], -[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) - -dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed -dnl to access previously installed libraries. The basic assumption is that -dnl a user will want packages to use other packages he previously installed -dnl with the same --prefix option. -dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate -dnl libraries, but is otherwise very convenient. -AC_DEFUN([AC_LIB_PREFIX], -[ - AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_CANONICAL_HOST]) - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_LIB_ARG_WITH([lib-prefix], -[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib - --without-lib-prefix don't search for libraries in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - fi - fi -]) - if test $use_additional = yes; then - dnl Potentially add $additional_includedir to $CPPFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's already present in $CPPFLAGS, - dnl 3. if it's /usr/local/include and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - for x in $CPPFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $CPPFLAGS. - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" - fi - fi - fi - fi - dnl Potentially add $additional_libdir to $LDFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's already present in $LDFLAGS, - dnl 3. if it's /usr/local/lib and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then - haveit= - for x in $LDFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LDFLAGS. - LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" - fi - fi - fi - fi - fi -]) - -dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, -dnl acl_final_exec_prefix, containing the values to which $prefix and -dnl $exec_prefix will expand at the end of the configure script. -AC_DEFUN([AC_LIB_PREPARE_PREFIX], -[ - dnl Unfortunately, prefix and exec_prefix get only finally determined - dnl at the end of configure. - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the -dnl variables prefix and exec_prefix bound to the values they will have -dnl at the end of the configure script. -AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], -[ - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - $1 - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_PREPARE_MULTILIB creates -dnl - a variable acl_libdirstem, containing the basename of the libdir, either -dnl "lib" or "lib64" or "lib/64", -dnl - a variable acl_libdirstem2, as a secondary possible value for -dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or -dnl "lib/amd64". -AC_DEFUN([AC_LIB_PREPARE_MULTILIB], -[ - dnl There is no formal standard regarding lib and lib64. - dnl On glibc systems, the current practice is that on a system supporting - dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under - dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine - dnl the compiler's default mode by looking at the compiler's library search - dnl path. If at least one of its elements ends in /lib64 or points to a - dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI. - dnl Otherwise we use the default, namely "lib". - dnl On Solaris systems, the current practice is that on a system supporting - dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under - dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or - dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib. - AC_REQUIRE([AC_CANONICAL_HOST]) - acl_libdirstem=lib - acl_libdirstem2= - case "$host_os" in - solaris*) - dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment - dnl . - dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link." - dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the - dnl symlink is missing, so we set acl_libdirstem2 too. - AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit], - [AC_EGREP_CPP([sixtyfour bits], [ -#ifdef _LP64 -sixtyfour bits -#endif - ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no]) - ]) - if test $gl_cv_solaris_64bit = yes; then - acl_libdirstem=lib/64 - case "$host_cpu" in - sparc*) acl_libdirstem2=lib/sparcv9 ;; - i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; - esac - fi - ;; - *) - searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` - if test -n "$searchpath"; then - acl_save_IFS="${IFS= }"; IFS=":" - for searchdir in $searchpath; do - if test -d "$searchdir"; then - case "$searchdir" in - */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; - */../ | */.. ) - # Better ignore directories of this form. They are misleading. - ;; - *) searchdir=`cd "$searchdir" && pwd` - case "$searchdir" in - */lib64 ) acl_libdirstem=lib64 ;; - esac ;; - esac - fi - done - IFS="$acl_save_IFS" - fi - ;; - esac - test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" -]) diff -Nru hitori-3.22.4/m4/libtool.m4 hitori-3.31.0/m4/libtool.m4 --- hitori-3.22.4/m4/libtool.m4 2017-10-02 08:07:50.000000000 +0000 +++ hitori-3.31.0/m4/libtool.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,8372 +0,0 @@ -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# -# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -m4_define([_LT_COPYING], [dnl -# Copyright (C) 2014 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program or library that is built -# using GNU Libtool, you may include this file under the same -# distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -]) - -# serial 58 LT_INIT - - -# LT_PREREQ(VERSION) -# ------------------ -# Complain and exit if this libtool version is less that VERSION. -m4_defun([LT_PREREQ], -[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, - [m4_default([$3], - [m4_fatal([Libtool version $1 or higher is required], - 63)])], - [$2])]) - - -# _LT_CHECK_BUILDDIR -# ------------------ -# Complain if the absolute build directory name contains unusual characters -m4_defun([_LT_CHECK_BUILDDIR], -[case `pwd` in - *\ * | *\ *) - AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; -esac -]) - - -# LT_INIT([OPTIONS]) -# ------------------ -AC_DEFUN([LT_INIT], -[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK -AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl -AC_BEFORE([$0], [LT_LANG])dnl -AC_BEFORE([$0], [LT_OUTPUT])dnl -AC_BEFORE([$0], [LTDL_INIT])dnl -m4_require([_LT_CHECK_BUILDDIR])dnl - -dnl Autoconf doesn't catch unexpanded LT_ macros by default: -m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl -m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl -dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 -dnl unless we require an AC_DEFUNed macro: -AC_REQUIRE([LTOPTIONS_VERSION])dnl -AC_REQUIRE([LTSUGAR_VERSION])dnl -AC_REQUIRE([LTVERSION_VERSION])dnl -AC_REQUIRE([LTOBSOLETE_VERSION])dnl -m4_require([_LT_PROG_LTMAIN])dnl - -_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) - -dnl Parse OPTIONS -_LT_SET_OPTIONS([$0], [$1]) - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS=$ltmain - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -_LT_SETUP - -# Only expand once: -m4_define([LT_INIT]) -])# LT_INIT - -# Old names: -AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) -AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PROG_LIBTOOL], []) -dnl AC_DEFUN([AM_PROG_LIBTOOL], []) - - -# _LT_PREPARE_CC_BASENAME -# ----------------------- -m4_defun([_LT_PREPARE_CC_BASENAME], [ -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -func_cc_basename () -{ - for cc_temp in @S|@*""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac - done - func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -} -])# _LT_PREPARE_CC_BASENAME - - -# _LT_CC_BASENAME(CC) -# ------------------- -# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME, -# but that macro is also expanded into generated libtool script, which -# arranges for $SED and $ECHO to be set by different means. -m4_defun([_LT_CC_BASENAME], -[m4_require([_LT_PREPARE_CC_BASENAME])dnl -AC_REQUIRE([_LT_DECL_SED])dnl -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl -func_cc_basename $1 -cc_basename=$func_cc_basename_result -]) - - -# _LT_FILEUTILS_DEFAULTS -# ---------------------- -# It is okay to use these file commands and assume they have been set -# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'. -m4_defun([_LT_FILEUTILS_DEFAULTS], -[: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} -])# _LT_FILEUTILS_DEFAULTS - - -# _LT_SETUP -# --------- -m4_defun([_LT_SETUP], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl - -_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl -dnl -_LT_DECL([], [host_alias], [0], [The host system])dnl -_LT_DECL([], [host], [0])dnl -_LT_DECL([], [host_os], [0])dnl -dnl -_LT_DECL([], [build_alias], [0], [The build system])dnl -_LT_DECL([], [build], [0])dnl -_LT_DECL([], [build_os], [0])dnl -dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -test -z "$LN_S" && LN_S="ln -s" -_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl -dnl -AC_REQUIRE([LT_CMD_MAX_LEN])dnl -_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl -_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl -dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl -m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl -m4_require([_LT_CMD_RELOAD])dnl -m4_require([_LT_CHECK_MAGIC_METHOD])dnl -m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl -m4_require([_LT_CMD_OLD_ARCHIVE])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_WITH_SYSROOT])dnl -m4_require([_LT_CMD_TRUNCATE])dnl - -_LT_CONFIG_LIBTOOL_INIT([ -# See if we are running on zsh, and set the options that allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST -fi -]) -if test -n "${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST -fi - -_LT_CHECK_OBJDIR - -m4_require([_LT_TAG_COMPILER])dnl - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test set != "${COLLECT_NAMES+set}"; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a '.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld=$lt_cv_prog_gnu_ld - -old_CC=$CC -old_CFLAGS=$CFLAGS - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -_LT_CC_BASENAME([$compiler]) - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - _LT_PATH_MAGIC - fi - ;; -esac - -# Use C for the default configuration in the libtool script -LT_SUPPORTED_TAG([CC]) -_LT_LANG_C_CONFIG -_LT_LANG_DEFAULT_CONFIG -_LT_CONFIG_COMMANDS -])# _LT_SETUP - - -# _LT_PREPARE_SED_QUOTE_VARS -# -------------------------- -# Define a few sed substitution that help us do robust quoting. -m4_defun([_LT_PREPARE_SED_QUOTE_VARS], -[# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([["`\\]]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' -]) - -# _LT_PROG_LTMAIN -# --------------- -# Note that this code is called both from 'configure', and 'config.status' -# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, -# 'config.status' has no value for ac_aux_dir unless we are using Automake, -# so we pass a copy along to make sure it has a sensible value anyway. -m4_defun([_LT_PROG_LTMAIN], -[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl -_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) -ltmain=$ac_aux_dir/ltmain.sh -])# _LT_PROG_LTMAIN - - -## ------------------------------------- ## -## Accumulate code for creating libtool. ## -## ------------------------------------- ## - -# So that we can recreate a full libtool script including additional -# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS -# in macros and then make a single call at the end using the 'libtool' -# label. - - -# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) -# ---------------------------------------- -# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL_INIT], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_INIT], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_INIT]) - - -# _LT_CONFIG_LIBTOOL([COMMANDS]) -# ------------------------------ -# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) - - -# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) -# ----------------------------------------------------- -m4_defun([_LT_CONFIG_SAVE_COMMANDS], -[_LT_CONFIG_LIBTOOL([$1]) -_LT_CONFIG_LIBTOOL_INIT([$2]) -]) - - -# _LT_FORMAT_COMMENT([COMMENT]) -# ----------------------------- -# Add leading comment marks to the start of each line, and a trailing -# full-stop to the whole comment if one is not present already. -m4_define([_LT_FORMAT_COMMENT], -[m4_ifval([$1], [ -m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], - [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) -)]) - - - -## ------------------------ ## -## FIXME: Eliminate VARNAME ## -## ------------------------ ## - - -# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) -# ------------------------------------------------------------------- -# CONFIGNAME is the name given to the value in the libtool script. -# VARNAME is the (base) name used in the configure script. -# VALUE may be 0, 1 or 2 for a computed quote escaped value based on -# VARNAME. Any other value will be used directly. -m4_define([_LT_DECL], -[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], - [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], - [m4_ifval([$1], [$1], [$2])]) - lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) - m4_ifval([$4], - [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) - lt_dict_add_subkey([lt_decl_dict], [$2], - [tagged?], [m4_ifval([$5], [yes], [no])])]) -]) - - -# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) -# -------------------------------------------------------- -m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) - - -# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_tag_varnames], -[_lt_decl_filter([tagged?], [yes], $@)]) - - -# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) -# --------------------------------------------------------- -m4_define([_lt_decl_filter], -[m4_case([$#], - [0], [m4_fatal([$0: too few arguments: $#])], - [1], [m4_fatal([$0: too few arguments: $#: $1])], - [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], - [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], - [lt_dict_filter([lt_decl_dict], $@)])[]dnl -]) - - -# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) -# -------------------------------------------------- -m4_define([lt_decl_quote_varnames], -[_lt_decl_filter([value], [1], $@)]) - - -# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_dquote_varnames], -[_lt_decl_filter([value], [2], $@)]) - - -# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_varnames_tagged], -[m4_assert([$# <= 2])dnl -_$0(m4_quote(m4_default([$1], [[, ]])), - m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), - m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) -m4_define([_lt_decl_varnames_tagged], -[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) - - -# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_all_varnames], -[_$0(m4_quote(m4_default([$1], [[, ]])), - m4_if([$2], [], - m4_quote(lt_decl_varnames), - m4_quote(m4_shift($@))))[]dnl -]) -m4_define([_lt_decl_all_varnames], -[lt_join($@, lt_decl_varnames_tagged([$1], - lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl -]) - - -# _LT_CONFIG_STATUS_DECLARE([VARNAME]) -# ------------------------------------ -# Quote a variable value, and forward it to 'config.status' so that its -# declaration there will have the same value as in 'configure'. VARNAME -# must have a single quote delimited value for this to work. -m4_define([_LT_CONFIG_STATUS_DECLARE], -[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) - - -# _LT_CONFIG_STATUS_DECLARATIONS -# ------------------------------ -# We delimit libtool config variables with single quotes, so when -# we write them to config.status, we have to be sure to quote all -# embedded single quotes properly. In configure, this macro expands -# each variable declared with _LT_DECL (and _LT_TAGDECL) into: -# -# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' -m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], -[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), - [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAGS -# ---------------- -# Output comment and list of tags supported by the script -m4_defun([_LT_LIBTOOL_TAGS], -[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl -available_tags='_LT_TAGS'dnl -]) - - -# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) -# ----------------------------------- -# Extract the dictionary values for VARNAME (optionally with TAG) and -# expand to a commented shell variable setting: -# -# # Some comment about what VAR is for. -# visible_name=$lt_internal_name -m4_define([_LT_LIBTOOL_DECLARE], -[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], - [description])))[]dnl -m4_pushdef([_libtool_name], - m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl -m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), - [0], [_libtool_name=[$]$1], - [1], [_libtool_name=$lt_[]$1], - [2], [_libtool_name=$lt_[]$1], - [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl -m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl -]) - - -# _LT_LIBTOOL_CONFIG_VARS -# ----------------------- -# Produce commented declarations of non-tagged libtool config variables -# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool' -# script. Tagged libtool config variables (even for the LIBTOOL CONFIG -# section) are produced by _LT_LIBTOOL_TAG_VARS. -m4_defun([_LT_LIBTOOL_CONFIG_VARS], -[m4_foreach([_lt_var], - m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAG_VARS(TAG) -# ------------------------- -m4_define([_LT_LIBTOOL_TAG_VARS], -[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) - - -# _LT_TAGVAR(VARNAME, [TAGNAME]) -# ------------------------------ -m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) - - -# _LT_CONFIG_COMMANDS -# ------------------- -# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of -# variables for single and double quote escaping we saved from calls -# to _LT_DECL, we can put quote escaped variables declarations -# into 'config.status', and then the shell code to quote escape them in -# for loops in 'config.status'. Finally, any additional code accumulated -# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. -m4_defun([_LT_CONFIG_COMMANDS], -[AC_PROVIDE_IFELSE([LT_OUTPUT], - dnl If the libtool generation code has been placed in $CONFIG_LT, - dnl instead of duplicating it all over again into config.status, - dnl then we will have config.status run $CONFIG_LT later, so it - dnl needs to know what name is stored there: - [AC_CONFIG_COMMANDS([libtool], - [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], - dnl If the libtool generation code is destined for config.status, - dnl expand the accumulated commands and init code now: - [AC_CONFIG_COMMANDS([libtool], - [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) -])#_LT_CONFIG_COMMANDS - - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], -[ - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -_LT_CONFIG_STATUS_DECLARATIONS -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$[]1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_quote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_dquote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -_LT_OUTPUT_LIBTOOL_INIT -]) - -# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) -# ------------------------------------ -# Generate a child script FILE with all initialization necessary to -# reuse the environment learned by the parent script, and make the -# file executable. If COMMENT is supplied, it is inserted after the -# '#!' sequence but before initialization text begins. After this -# macro, additional text can be appended to FILE to form the body of -# the child script. The macro ends with non-zero status if the -# file could not be fully written (such as if the disk is full). -m4_ifdef([AS_INIT_GENERATED], -[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], -[m4_defun([_LT_GENERATED_FILE_INIT], -[m4_require([AS_PREPARE])]dnl -[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl -[lt_write_fail=0 -cat >$1 <<_ASEOF || lt_write_fail=1 -#! $SHELL -# Generated by $as_me. -$2 -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$1 <<\_ASEOF || lt_write_fail=1 -AS_SHELL_SANITIZE -_AS_PREPARE -exec AS_MESSAGE_FD>&1 -_ASEOF -test 0 = "$lt_write_fail" && chmod +x $1[]dnl -m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT - -# LT_OUTPUT -# --------- -# This macro allows early generation of the libtool script (before -# AC_OUTPUT is called), incase it is used in configure for compilation -# tests. -AC_DEFUN([LT_OUTPUT], -[: ${CONFIG_LT=./config.lt} -AC_MSG_NOTICE([creating $CONFIG_LT]) -_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], -[# Run this file to recreate a libtool stub with the current configuration.]) - -cat >>"$CONFIG_LT" <<\_LTEOF -lt_cl_silent=false -exec AS_MESSAGE_LOG_FD>>config.log -{ - echo - AS_BOX([Running $as_me.]) -} >&AS_MESSAGE_LOG_FD - -lt_cl_help="\ -'$as_me' creates a local libtool stub from the current configuration, -for use in further configure time tests before the real libtool is -generated. - -Usage: $[0] [[OPTIONS]] - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - -Report bugs to ." - -lt_cl_version="\ -m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl -m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) -configured by $[0], generated by m4_PACKAGE_STRING. - -Copyright (C) 2011 Free Software Foundation, Inc. -This config.lt script is free software; the Free Software Foundation -gives unlimited permision to copy, distribute and modify it." - -while test 0 != $[#] -do - case $[1] in - --version | --v* | -V ) - echo "$lt_cl_version"; exit 0 ;; - --help | --h* | -h ) - echo "$lt_cl_help"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --quiet | --q* | --silent | --s* | -q ) - lt_cl_silent=: ;; - - -*) AC_MSG_ERROR([unrecognized option: $[1] -Try '$[0] --help' for more information.]) ;; - - *) AC_MSG_ERROR([unrecognized argument: $[1] -Try '$[0] --help' for more information.]) ;; - esac - shift -done - -if $lt_cl_silent; then - exec AS_MESSAGE_FD>/dev/null -fi -_LTEOF - -cat >>"$CONFIG_LT" <<_LTEOF -_LT_OUTPUT_LIBTOOL_COMMANDS_INIT -_LTEOF - -cat >>"$CONFIG_LT" <<\_LTEOF -AC_MSG_NOTICE([creating $ofile]) -_LT_OUTPUT_LIBTOOL_COMMANDS -AS_EXIT(0) -_LTEOF -chmod +x "$CONFIG_LT" - -# configure is writing to config.log, but config.lt does its own redirection, -# appending to config.log, which fails on DOS, as config.log is still kept -# open by configure. Here we exec the FD to /dev/null, effectively closing -# config.log, so it can be properly (re)opened and appended to by config.lt. -lt_cl_success=: -test yes = "$silent" && - lt_config_lt_args="$lt_config_lt_args --quiet" -exec AS_MESSAGE_LOG_FD>/dev/null -$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false -exec AS_MESSAGE_LOG_FD>>config.log -$lt_cl_success || AS_EXIT(1) -])# LT_OUTPUT - - -# _LT_CONFIG(TAG) -# --------------- -# If TAG is the built-in tag, create an initial libtool script with a -# default configuration from the untagged config vars. Otherwise add code -# to config.status for appending the configuration named by TAG from the -# matching tagged config vars. -m4_defun([_LT_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_CONFIG_SAVE_COMMANDS([ - m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl - m4_if(_LT_TAG, [C], [ - # See if we are running on zsh, and set the options that allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST - fi - - cfgfile=${ofile}T - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL -# Generated automatically by $as_me ($PACKAGE) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. - -# Provide generalized library-building support services. -# Written by Gordon Matzigkeit, 1996 - -_LT_COPYING -_LT_LIBTOOL_TAGS - -# Configured defaults for sys_lib_dlsearch_path munging. -: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} - -# ### BEGIN LIBTOOL CONFIG -_LT_LIBTOOL_CONFIG_VARS -_LT_LIBTOOL_TAG_VARS -# ### END LIBTOOL CONFIG - -_LT_EOF - - cat <<'_LT_EOF' >> "$cfgfile" - -# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE - -_LT_PREPARE_MUNGE_PATH_LIST -_LT_PREPARE_CC_BASENAME - -# ### END FUNCTIONS SHARED WITH CONFIGURE - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test set != "${COLLECT_NAMES+set}"; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - _LT_PROG_LTMAIN - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -], -[cat <<_LT_EOF >> "$ofile" - -dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded -dnl in a comment (ie after a #). -# ### BEGIN LIBTOOL TAG CONFIG: $1 -_LT_LIBTOOL_TAG_VARS(_LT_TAG) -# ### END LIBTOOL TAG CONFIG: $1 -_LT_EOF -])dnl /m4_if -], -[m4_if([$1], [], [ - PACKAGE='$PACKAGE' - VERSION='$VERSION' - RM='$RM' - ofile='$ofile'], []) -])dnl /_LT_CONFIG_SAVE_COMMANDS -])# _LT_CONFIG - - -# LT_SUPPORTED_TAG(TAG) -# --------------------- -# Trace this macro to discover what tags are supported by the libtool -# --tag option, using: -# autoconf --trace 'LT_SUPPORTED_TAG:$1' -AC_DEFUN([LT_SUPPORTED_TAG], []) - - -# C support is built-in for now -m4_define([_LT_LANG_C_enabled], []) -m4_define([_LT_TAGS], []) - - -# LT_LANG(LANG) -# ------------- -# Enable libtool support for the given language if not already enabled. -AC_DEFUN([LT_LANG], -[AC_BEFORE([$0], [LT_OUTPUT])dnl -m4_case([$1], - [C], [_LT_LANG(C)], - [C++], [_LT_LANG(CXX)], - [Go], [_LT_LANG(GO)], - [Java], [_LT_LANG(GCJ)], - [Fortran 77], [_LT_LANG(F77)], - [Fortran], [_LT_LANG(FC)], - [Windows Resource], [_LT_LANG(RC)], - [m4_ifdef([_LT_LANG_]$1[_CONFIG], - [_LT_LANG($1)], - [m4_fatal([$0: unsupported language: "$1"])])])dnl -])# LT_LANG - - -# _LT_LANG(LANGNAME) -# ------------------ -m4_defun([_LT_LANG], -[m4_ifdef([_LT_LANG_]$1[_enabled], [], - [LT_SUPPORTED_TAG([$1])dnl - m4_append([_LT_TAGS], [$1 ])dnl - m4_define([_LT_LANG_]$1[_enabled], [])dnl - _LT_LANG_$1_CONFIG($1)])dnl -])# _LT_LANG - - -m4_ifndef([AC_PROG_GO], [ -############################################################ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_GO. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -############################################################ -m4_defun([AC_PROG_GO], -[AC_LANG_PUSH(Go)dnl -AC_ARG_VAR([GOC], [Go compiler command])dnl -AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl -_AC_ARG_VAR_LDFLAGS()dnl -AC_CHECK_TOOL(GOC, gccgo) -if test -z "$GOC"; then - if test -n "$ac_tool_prefix"; then - AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) - fi -fi -if test -z "$GOC"; then - AC_CHECK_PROG(GOC, gccgo, gccgo, false) -fi -])#m4_defun -])#m4_ifndef - - -# _LT_LANG_DEFAULT_CONFIG -# ----------------------- -m4_defun([_LT_LANG_DEFAULT_CONFIG], -[AC_PROVIDE_IFELSE([AC_PROG_CXX], - [LT_LANG(CXX)], - [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) - -AC_PROVIDE_IFELSE([AC_PROG_F77], - [LT_LANG(F77)], - [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) - -AC_PROVIDE_IFELSE([AC_PROG_FC], - [LT_LANG(FC)], - [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) - -dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal -dnl pulling things in needlessly. -AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([LT_PROG_GCJ], - [LT_LANG(GCJ)], - [m4_ifdef([AC_PROG_GCJ], - [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([A][M_PROG_GCJ], - [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([LT_PROG_GCJ], - [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) - -AC_PROVIDE_IFELSE([AC_PROG_GO], - [LT_LANG(GO)], - [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) - -AC_PROVIDE_IFELSE([LT_PROG_RC], - [LT_LANG(RC)], - [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) -])# _LT_LANG_DEFAULT_CONFIG - -# Obsolete macros: -AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) -AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) -AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) -AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_CXX], []) -dnl AC_DEFUN([AC_LIBTOOL_F77], []) -dnl AC_DEFUN([AC_LIBTOOL_FC], []) -dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) -dnl AC_DEFUN([AC_LIBTOOL_RC], []) - - -# _LT_TAG_COMPILER -# ---------------- -m4_defun([_LT_TAG_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl -_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl -_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl -_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_TAG_COMPILER - - -# _LT_COMPILER_BOILERPLATE -# ------------------------ -# Check for compiler boilerplate output or warnings with -# the simple compiler test code. -m4_defun([_LT_COMPILER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* -])# _LT_COMPILER_BOILERPLATE - - -# _LT_LINKER_BOILERPLATE -# ---------------------- -# Check for linker boilerplate output or warnings with -# the simple link test code. -m4_defun([_LT_LINKER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* -])# _LT_LINKER_BOILERPLATE - -# _LT_REQUIRED_DARWIN_CHECKS -# ------------------------- -m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ - case $host_os in - rhapsody* | darwin*) - AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) - AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) - AC_CHECK_TOOL([LIPO], [lipo], [:]) - AC_CHECK_TOOL([OTOOL], [otool], [:]) - AC_CHECK_TOOL([OTOOL64], [otool64], [:]) - _LT_DECL([], [DSYMUTIL], [1], - [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) - _LT_DECL([], [NMEDIT], [1], - [Tool to change global to local symbols on Mac OS X]) - _LT_DECL([], [LIPO], [1], - [Tool to manipulate fat objects and archives on Mac OS X]) - _LT_DECL([], [OTOOL], [1], - [ldd/readelf like tool for Mach-O binaries on Mac OS X]) - _LT_DECL([], [OTOOL64], [1], - [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) - - AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], - [lt_cv_apple_cc_single_mod=no - if test -z "$LT_MULTI_MODULE"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - # If there is a non-empty error log, and "single_module" - # appears in it, assume the flag caused a linker warning - if test -s conftest.err && $GREP single_module conftest.err; then - cat conftest.err >&AS_MESSAGE_LOG_FD - # Otherwise, if the output was created with a 0 exit code from - # the compiler, it worked. - elif test -f libconftest.dylib && test 0 = "$_lt_result"; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi]) - - AC_CACHE_CHECK([for -exported_symbols_list linker flag], - [lt_cv_ld_exported_symbols_list], - [lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [lt_cv_ld_exported_symbols_list=yes], - [lt_cv_ld_exported_symbols_list=no]) - LDFLAGS=$save_LDFLAGS - ]) - - AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], - [lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD - echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD - $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD - echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD - $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -s conftest.err && $GREP force_load conftest.err; then - cat conftest.err >&AS_MESSAGE_LOG_FD - elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - ]) - case $host_os in - rhapsody* | darwin1.[[012]]) - _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; - 10.[[012]][[,.]]*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test yes = "$lt_cv_apple_cc_single_mod"; then - _lt_dar_single_mod='$single_module' - fi - if test yes = "$lt_cv_ld_exported_symbols_list"; then - _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' - fi - if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac -]) - - -# _LT_DARWIN_LINKER_FEATURES([TAG]) -# --------------------------------- -# Checks for linker and compiler features on darwin -m4_defun([_LT_DARWIN_LINKER_FEATURES], -[ - m4_require([_LT_REQUIRED_DARWIN_CHECKS]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_automatic, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - if test yes = "$lt_cv_ld_force_load"; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], - [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='' - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined - case $cc_basename in - ifort*|nagfor*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test yes = "$_lt_dar_can_shared"; then - output_verbose_link_cmd=func_echo_all - _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" - _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" - _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" - m4_if([$1], [CXX], -[ if test yes != "$lt_cv_apple_cc_single_mod"; then - _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil" - fi -],[]) - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi -]) - -# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) -# ---------------------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -# Store the results from the different compilers for each TAGNAME. -# Allow to override them for all tags through lt_cv_aix_libpath. -m4_defun([_LT_SYS_MODULE_PATH_AIX], -[m4_require([_LT_DECL_SED])dnl -if test set = "${lt_cv_aix_libpath+set}"; then - aix_libpath=$lt_cv_aix_libpath -else - AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], - [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ - lt_aix_libpath_sed='[ - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }]' - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi],[]) - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib - fi - ]) - aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) -fi -])# _LT_SYS_MODULE_PATH_AIX - - -# _LT_SHELL_INIT(ARG) -# ------------------- -m4_define([_LT_SHELL_INIT], -[m4_divert_text([M4SH-INIT], [$1 -])])# _LT_SHELL_INIT - - - -# _LT_PROG_ECHO_BACKSLASH -# ----------------------- -# Find how we can fake an echo command that does not interpret backslash. -# In particular, with Autoconf 2.60 or later we add some code to the start -# of the generated configure script that will find a shell with a builtin -# printf (that we can use as an echo command). -m4_defun([_LT_PROG_ECHO_BACKSLASH], -[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -AC_MSG_CHECKING([how to print strings]) -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$[]1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} - -case $ECHO in - printf*) AC_MSG_RESULT([printf]) ;; - print*) AC_MSG_RESULT([print -r]) ;; - *) AC_MSG_RESULT([cat]) ;; -esac - -m4_ifdef([_AS_DETECT_SUGGESTED], -[_AS_DETECT_SUGGESTED([ - test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test "X`printf %s $ECHO`" = "X$ECHO" \ - || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) - -_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) -_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) -])# _LT_PROG_ECHO_BACKSLASH - - -# _LT_WITH_SYSROOT -# ---------------- -AC_DEFUN([_LT_WITH_SYSROOT], -[AC_MSG_CHECKING([for sysroot]) -AC_ARG_WITH([sysroot], -[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@], - [Search for dependent libraries within DIR (or the compiler's sysroot - if not specified).])], -[], [with_sysroot=no]) - -dnl lt_sysroot will always be passed unquoted. We quote it here -dnl in case the user passed a directory name. -lt_sysroot= -case $with_sysroot in #( - yes) - if test yes = "$GCC"; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - AC_MSG_RESULT([$with_sysroot]) - AC_MSG_ERROR([The sysroot must be an absolute path.]) - ;; -esac - - AC_MSG_RESULT([${lt_sysroot:-no}]) -_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl -[dependent libraries, and where our libraries should be installed.])]) - -# _LT_ENABLE_LOCK -# --------------- -m4_defun([_LT_ENABLE_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AS_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test no = "$enable_libtool_lock" || enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out what ABI is being produced by ac_compile, and set mode - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE=32 - ;; - *ELF-64*) - HPUX_IA64_MODE=64 - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test yes = "$lt_cv_prog_gnu_ld"; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -mips64*-*linux*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - emul=elf - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - emul="${emul}32" - ;; - *64-bit*) - emul="${emul}64" - ;; - esac - case `/usr/bin/file conftest.$ac_objext` in - *MSB*) - emul="${emul}btsmip" - ;; - *LSB*) - emul="${emul}ltsmip" - ;; - esac - case `/usr/bin/file conftest.$ac_objext` in - *N32*) - emul="${emul}n32" - ;; - esac - LD="${LD-ld} -m $emul" - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. Note that the listed cases only cover the - # situations where additional linker options are needed (such as when - # doing 32-bit compilation for a host where ld defaults to 64-bit, or - # vice versa); the common cases where no linker options are needed do - # not appear in the list. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - case `/usr/bin/file conftest.o` in - *x86-64*) - LD="${LD-ld} -m elf32_x86_64" - ;; - *) - LD="${LD-ld} -m elf_i386" - ;; - esac - ;; - powerpc64le-*linux*) - LD="${LD-ld} -m elf32lppclinux" - ;; - powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - powerpcle-*linux*) - LD="${LD-ld} -m elf64lppc" - ;; - powerpc-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS=$CFLAGS - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test yes != "$lt_cv_cc_needs_belf"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS=$SAVE_CFLAGS - fi - ;; -*-*solaris*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) - case $host in - i?86-*-solaris*|x86_64-*-solaris*) - LD="${LD-ld} -m elf_x86_64" - ;; - sparc*-*-solaris*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - # GNU ld 2.21 introduced _sol2 emulations. Use them if available. - if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD=${LD-ld}_sol2 - fi - ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks=$enable_libtool_lock -])# _LT_ENABLE_LOCK - - -# _LT_PROG_AR -# ----------- -m4_defun([_LT_PROG_AR], -[AC_CHECK_TOOLS(AR, [ar], false) -: ${AR=ar} -: ${AR_FLAGS=cru} -_LT_DECL([], [AR], [1], [The archiver]) -_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) - -AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], - [lt_cv_ar_at_file=no - AC_COMPILE_IFELSE([AC_LANG_PROGRAM], - [echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' - AC_TRY_EVAL([lt_ar_try]) - if test 0 -eq "$ac_status"; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - AC_TRY_EVAL([lt_ar_try]) - if test 0 -ne "$ac_status"; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - ]) - ]) - -if test no = "$lt_cv_ar_at_file"; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi -_LT_DECL([], [archiver_list_spec], [1], - [How to feed a file listing to the archiver]) -])# _LT_PROG_AR - - -# _LT_CMD_OLD_ARCHIVE -# ------------------- -m4_defun([_LT_CMD_OLD_ARCHIVE], -[_LT_PROG_AR - -AC_CHECK_TOOL(STRIP, strip, :) -test -z "$STRIP" && STRIP=: -_LT_DECL([], [STRIP], [1], [A symbol stripping program]) - -AC_CHECK_TOOL(RANLIB, ranlib, :) -test -z "$RANLIB" && RANLIB=: -_LT_DECL([], [RANLIB], [1], - [Commands used to install an old-style archive]) - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - bitrig* | openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" -fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac -_LT_DECL([], [old_postinstall_cmds], [2]) -_LT_DECL([], [old_postuninstall_cmds], [2]) -_LT_TAGDECL([], [old_archive_cmds], [2], - [Commands used to build an old-style archive]) -_LT_DECL([], [lock_old_archive_extraction], [0], - [Whether to use a lock for old archive extraction]) -])# _LT_CMD_OLD_ARCHIVE - - -# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([_LT_COMPILER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - fi - $RM conftest* -]) - -if test yes = "[$]$2"; then - m4_if([$5], , :, [$5]) -else - m4_if([$6], , :, [$6]) -fi -])# _LT_COMPILER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) - - -# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------- -# Check whether the given linker option works -AC_DEFUN([_LT_LINKER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - else - $2=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS -]) - -if test yes = "[$]$2"; then - m4_if([$4], , :, [$4]) -else - m4_if([$5], , :, [$5]) -fi -])# _LT_LINKER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) - - -# LT_CMD_MAX_LEN -#--------------- -AC_DEFUN([LT_CMD_MAX_LEN], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - teststring=ABCD - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - os2*) - # The test takes a long time on OS/2. - lt_cv_sys_max_cmd_len=8192 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len" && \ - test undefined != "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test X`env echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test 17 != "$i" # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac -]) -if test -n "$lt_cv_sys_max_cmd_len"; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -max_cmd_len=$lt_cv_sys_max_cmd_len -_LT_DECL([], [max_cmd_len], [0], - [What is the maximum length of a command?]) -])# LT_CMD_MAX_LEN - -# Old name: -AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) - - -# _LT_HEADER_DLFCN -# ---------------- -m4_defun([_LT_HEADER_DLFCN], -[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl -])# _LT_HEADER_DLFCN - - -# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ---------------------------------------------------------------- -m4_defun([_LT_TRY_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test yes = "$cross_compiling"; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -[#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisibility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -}] -_LT_EOF - if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then - (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_dlunknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_TRY_DLOPEN_SELF - - -# LT_SYS_DLOPEN_SELF -# ------------------ -AC_DEFUN([LT_SYS_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test yes != "$enable_dlopen"; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen=load_add_on - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen=LoadLibrary - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[ - lt_cv_dlopen=dyld - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - tpf*) - # Don't try to run any link tests for TPF. We know it's impossible - # because TPF is a cross-compiler, and we know how we open DSOs. - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - lt_cv_dlopen_self=no - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen=shl_load], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen=dlopen], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test no = "$lt_cv_dlopen"; then - enable_dlopen=no - else - enable_dlopen=yes - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS=$CPPFLAGS - test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS=$LDFLAGS - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS=$LIBS - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test yes = "$lt_cv_dlopen_self"; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS=$save_CPPFLAGS - LDFLAGS=$save_LDFLAGS - LIBS=$save_LIBS - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -_LT_DECL([dlopen_support], [enable_dlopen], [0], - [Whether dlopen is supported]) -_LT_DECL([dlopen_self], [enable_dlopen_self], [0], - [Whether dlopen of programs is supported]) -_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], - [Whether dlopen of statically linked programs is supported]) -])# LT_SYS_DLOPEN_SELF - -# Old name: -AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) - - -# _LT_COMPILER_C_O([TAGNAME]) -# --------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler. -# This macro does not hard code the compiler like AC_PROG_CC_C_O. -m4_defun([_LT_COMPILER_C_O], -[m4_require([_LT_DECL_SED])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . 2>&AS_MESSAGE_LOG_FD - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* -]) -_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], - [Does compiler simultaneously support -c and -o options?]) -])# _LT_COMPILER_C_O - - -# _LT_COMPILER_FILE_LOCKS([TAGNAME]) -# ---------------------------------- -# Check to see if we can do hard links to lock some files if needed -m4_defun([_LT_COMPILER_FILE_LOCKS], -[m4_require([_LT_ENABLE_LOCK])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_COMPILER_C_O([$1]) - -hard_links=nottested -if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test no = "$hard_links"; then - AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) -])# _LT_COMPILER_FILE_LOCKS - - -# _LT_CHECK_OBJDIR -# ---------------- -m4_defun([_LT_CHECK_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -_LT_DECL([], [objdir], [0], - [The name of the directory that contains temporary libtool files])dnl -m4_pattern_allow([LT_OBJDIR])dnl -AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/", - [Define to the sub-directory where libtool stores uninstalled libraries.]) -])# _LT_CHECK_OBJDIR - - -# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) -# -------------------------------------- -# Check hardcoding attributes. -m4_defun([_LT_LINKER_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || - test -n "$_LT_TAGVAR(runpath_var, $1)" || - test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then - - # We can hardcode non-existent directories. - if test no != "$_LT_TAGVAR(hardcode_direct, $1)" && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" && - test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then - # Linking always hardcodes the temporary library directory. - _LT_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) - -if test relink = "$_LT_TAGVAR(hardcode_action, $1)" || - test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then - # Fast installation is not supported - enable_fast_install=no -elif test yes = "$shlibpath_overrides_runpath" || - test no = "$enable_shared"; then - # Fast installation is not necessary - enable_fast_install=needless -fi -_LT_TAGDECL([], [hardcode_action], [0], - [How to hardcode a shared library path into an executable]) -])# _LT_LINKER_HARDCODE_LIBPATH - - -# _LT_CMD_STRIPLIB -# ---------------- -m4_defun([_LT_CMD_STRIPLIB], -[m4_require([_LT_DECL_EGREP]) -striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP"; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) -_LT_DECL([], [striplib], [1]) -])# _LT_CMD_STRIPLIB - - -# _LT_PREPARE_MUNGE_PATH_LIST -# --------------------------- -# Make sure func_munge_path_list() is defined correctly. -m4_defun([_LT_PREPARE_MUNGE_PATH_LIST], -[[# func_munge_path_list VARIABLE PATH -# ----------------------------------- -# VARIABLE is name of variable containing _space_ separated list of -# directories to be munged by the contents of PATH, which is string -# having a format: -# "DIR[:DIR]:" -# string "DIR[ DIR]" will be prepended to VARIABLE -# ":DIR[:DIR]" -# string "DIR[ DIR]" will be appended to VARIABLE -# "DIRP[:DIRP]::[DIRA:]DIRA" -# string "DIRP[ DIRP]" will be prepended to VARIABLE and string -# "DIRA[ DIRA]" will be appended to VARIABLE -# "DIR[:DIR]" -# VARIABLE will be replaced by "DIR[ DIR]" -func_munge_path_list () -{ - case x@S|@2 in - x) - ;; - *:) - eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\" - ;; - x:*) - eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\" - ;; - *::*) - eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" - eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\" - ;; - *) - eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\" - ;; - esac -} -]])# _LT_PREPARE_PATH_LIST - - -# _LT_SYS_DYNAMIC_LINKER([TAG]) -# ----------------------------- -# PORTME Fill in your ld.so characteristics -m4_defun([_LT_SYS_DYNAMIC_LINKER], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_OBJDUMP])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl -m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl -AC_MSG_CHECKING([dynamic linker characteristics]) -m4_if([$1], - [], [ -if test yes = "$GCC"; then - case $host_os in - darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; - *) lt_awk_arg='/^libraries:/' ;; - esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;; - *) lt_sed_strip_eq='s|=/|/|g' ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary... - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - # ...but if some path component already ends with the multilib dir we assume - # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). - case "$lt_multi_os_dir; $lt_search_path_spec " in - "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) - lt_multi_os_dir= - ;; - esac - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" - elif test -n "$lt_multi_os_dir"; then - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS = " "; FS = "/|\n";} { - lt_foo = ""; - lt_count = 0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo = "/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[[lt_foo]]++; } - if (lt_freq[[lt_foo]] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=.so -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -AC_ARG_VAR([LT_SYS_LIBRARY_PATH], -[User-defined run-time library search path.]) - -case $host_os in -aix3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='$libname$release$shared_ext$major' - ;; - -aix[[4-9]]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test ia64 = "$host_cpu"; then - # AIX 5 supports IA64 - library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line '#! .'. This would cause the generated library to - # depend on '.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # Using Import Files as archive members, it is possible to support - # filename-based versioning of shared library archives on AIX. While - # this would work for both with and without runtime linking, it will - # prevent static linking of such archives. So we do filename-based - # shared library versioning with .so extension only, which is used - # when both runtime linking and shared linking is enabled. - # Unfortunately, runtime linking may impact performance, so we do - # not want this to be the default eventually. Also, we use the - # versioned .so libs for executables only if there is the -brtl - # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. - # To allow for filename-based versioning support, we need to create - # libNAME.so.V as an archive file, containing: - # *) an Import File, referring to the versioned filename of the - # archive as well as the shared archive member, telling the - # bitwidth (32 or 64) of that shared object, and providing the - # list of exported symbols of that shared object, eventually - # decorated with the 'weak' keyword - # *) the shared object with the F_LOADONLY flag set, to really avoid - # it being seen by the linker. - # At run time we better use the real file rather than another symlink, - # but for link time we create the symlink libNAME.so -> libNAME.so.V - - case $with_aix_soname,$aix_use_runtimelinking in - # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - aix,yes) # traditional libtool - dynamic_linker='AIX unversionable lib.so' - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - aix,no) # traditional AIX only - dynamic_linker='AIX lib.a[(]lib.so.V[)]' - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - ;; - svr4,*) # full svr4 only - dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,yes) # both, prefer svr4 - dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # unpreferred sharedlib libNAME.a needs extra handling - postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' - postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,no) # both, prefer aix - dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]" - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling - postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' - postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' - ;; - esac - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='$libname$shared_ext' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[[45]]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' - library_names_spec='$libname.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec=$LIB - if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; - - *) - # Assume MSVC wrapper - library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' - soname_spec='$libname$release$major$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[[23]].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[[01]]* | freebsdelf3.[[01]]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ - freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -haiku*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - if test 32 = "$HPUX_IA64_MODE"; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - sys_lib_dlsearch_path_spec=/usr/lib/hpux32 - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - sys_lib_dlsearch_path_spec=/usr/lib/hpux64 - fi - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[[3-9]]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test yes = "$lt_cv_prog_gnu_ld"; then - version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" - sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -linux*android*) - version_type=none # Android doesn't support versioned libraries. - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext' - soname_spec='$libname$release$shared_ext' - finish_cmds= - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - dynamic_linker='Android linker' - # Don't embed -rpath directories since the linker doesn't support them. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], - [lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ - LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], - [lt_cv_shlibpath_overrides_runpath=yes])]) - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - ]) - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Add ABI-specific directories to the system library path. - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" - - # Ideally, we could use ldconfig to report *all* directores which are - # searched for libraries, however this is still not possible. Aside from not - # being certain /sbin/ldconfig is available, command - # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, - # even though it is searched at run-time. Try to do the best guess by - # appending ld.so.conf contents (and includes) to the search path. - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd* | bitrig*) - version_type=sunos - sys_lib_dlsearch_path_spec=/usr/lib - need_lib_prefix=no - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - need_version=no - else - need_version=yes - fi - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -os2*) - libname_spec='$name' - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - # OS/2 can only load a DLL with a base name of 8 characters or less. - soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; - v=$($ECHO $release$versuffix | tr -d .-); - n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); - $ECHO $n$v`$shared_ext' - library_names_spec='${libname}_dll.$libext' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=BEGINLIBPATH - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test yes = "$with_gnu_ld"; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec; then - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' - soname_spec='$libname$shared_ext.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=sco - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test yes = "$with_gnu_ld"; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test no = "$dynamic_linker" && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test yes = "$GCC"; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then - sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec -fi - -if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then - sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec -fi - -# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... -configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec - -# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code -func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" - -# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool -configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH - -_LT_DECL([], [variables_saved_for_relink], [1], - [Variables whose values should be saved in libtool wrapper scripts and - restored at link time]) -_LT_DECL([], [need_lib_prefix], [0], - [Do we need the "lib" prefix for modules?]) -_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) -_LT_DECL([], [version_type], [0], [Library versioning type]) -_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) -_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) -_LT_DECL([], [shlibpath_overrides_runpath], [0], - [Is shlibpath searched before the hard-coded library search path?]) -_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) -_LT_DECL([], [library_names_spec], [1], - [[List of archive names. First name is the real one, the rest are links. - The last name is the one that the linker finds with -lNAME]]) -_LT_DECL([], [soname_spec], [1], - [[The coded name of the library, if different from the real name]]) -_LT_DECL([], [install_override_mode], [1], - [Permission mode override for installation of shared libraries]) -_LT_DECL([], [postinstall_cmds], [2], - [Command to use after installation of a shared archive]) -_LT_DECL([], [postuninstall_cmds], [2], - [Command to use after uninstallation of a shared archive]) -_LT_DECL([], [finish_cmds], [2], - [Commands used to finish a libtool library installation in a directory]) -_LT_DECL([], [finish_eval], [1], - [[As "finish_cmds", except a single script fragment to be evaled but - not shown]]) -_LT_DECL([], [hardcode_into_libs], [0], - [Whether we should hardcode library paths into libraries]) -_LT_DECL([], [sys_lib_search_path_spec], [2], - [Compile-time system search path for libraries]) -_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2], - [Detected run-time system search path for libraries]) -_LT_DECL([], [configure_time_lt_sys_library_path], [2], - [Explicit LT_SYS_LIBRARY_PATH set during ./configure time]) -])# _LT_SYS_DYNAMIC_LINKER - - -# _LT_PATH_TOOL_PREFIX(TOOL) -# -------------------------- -# find a file program that can recognize shared library -AC_DEFUN([_LT_PATH_TOOL_PREFIX], -[m4_require([_LT_DECL_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD=$MAGIC_CMD - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="m4_if([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$1"; then - lt_cv_path_MAGIC_CMD=$ac_dir/"$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD=$lt_cv_path_MAGIC_CMD - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS=$lt_save_ifs - MAGIC_CMD=$lt_save_MAGIC_CMD - ;; -esac]) -MAGIC_CMD=$lt_cv_path_MAGIC_CMD -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -_LT_DECL([], [MAGIC_CMD], [0], - [Used to examine libraries when file_magic_cmd begins with "file"])dnl -])# _LT_PATH_TOOL_PREFIX - -# Old name: -AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) - - -# _LT_PATH_MAGIC -# -------------- -# find a file program that can recognize a shared library -m4_defun([_LT_PATH_MAGIC], -[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# _LT_PATH_MAGIC - - -# LT_PATH_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([LT_PATH_LD], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PROG_ECHO_BACKSLASH])dnl - -AC_ARG_WITH([gnu-ld], - [AS_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test no = "$withval" || with_gnu_ld=yes], - [with_gnu_ld=no])dnl - -ac_prog=ld -if test yes = "$GCC"; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return, which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD=$ac_prog - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test yes = "$with_gnu_ld"; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD=$ac_dir/$ac_prog - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1 conftest.i -cat conftest.i conftest.i >conftest2.i -: ${lt_DD:=$DD} -AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd], -[if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: -fi]) -rm -f conftest.i conftest2.i conftest.out]) -])# _LT_PATH_DD - - -# _LT_CMD_TRUNCATE -# ---------------- -# find command to truncate a binary pipe -m4_defun([_LT_CMD_TRUNCATE], -[m4_require([_LT_PATH_DD]) -AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin], -[printf 0123456789abcdef0123456789abcdef >conftest.i -cat conftest.i conftest.i >conftest2.i -lt_cv_truncate_bin= -if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" -fi -rm -f conftest.i conftest2.i conftest.out -test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"]) -_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1], - [Command to truncate a binary pipe]) -])# _LT_CMD_TRUNCATE - - -# _LT_CHECK_MAGIC_METHOD -# ---------------------- -# how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -m4_defun([_LT_CHECK_MAGIC_METHOD], -[m4_require([_LT_DECL_EGREP]) -m4_require([_LT_DECL_OBJDUMP]) -AC_CACHE_CHECK([how to recognize dependent libraries], -lt_cv_deplibs_check_method, -[lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# 'unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# that responds to the $file_magic_cmd with a given extended regex. -# If you have 'file' or equivalent on your system and you're not sure -# whether 'pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[[4-9]]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[[45]]*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[[3-9]]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd* | bitrig*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -os2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -_LT_DECL([], [deplibs_check_method], [1], - [Method to check whether dependent libraries are shared objects]) -_LT_DECL([], [file_magic_cmd], [1], - [Command to use when deplibs_check_method = "file_magic"]) -_LT_DECL([], [file_magic_glob], [1], - [How to find potential files when deplibs_check_method = "file_magic"]) -_LT_DECL([], [want_nocaseglob], [1], - [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) -])# _LT_CHECK_MAGIC_METHOD - - -# LT_PATH_NM -# ---------- -# find the pathname to a BSD- or MS-compatible name lister -AC_DEFUN([LT_PATH_NM], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM=$NM -else - lt_nm_to_check=${ac_tool_prefix}nm - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/$lt_tmp_nm - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the 'sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty - case $build_os in - mingw*) lt_bad_file=conftest.nm/nofile ;; - *) lt_bad_file=/dev/null ;; - esac - case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in - *$lt_bad_file* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break 2 - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break 2 - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS=$lt_save_ifs - done - : ${lt_cv_path_NM=no} -fi]) -if test no != "$lt_cv_path_NM"; then - NM=$lt_cv_path_NM -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) - case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols -headers" - ;; - *) - DUMPBIN=: - ;; - esac - fi - AC_SUBST([DUMPBIN]) - if test : != "$DUMPBIN"; then - NM=$DUMPBIN - fi -fi -test -z "$NM" && NM=nm -AC_SUBST([NM]) -_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl - -AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], - [lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) - cat conftest.out >&AS_MESSAGE_LOG_FD - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest*]) -])# LT_PATH_NM - -# Old names: -AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) -AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_PROG_NM], []) -dnl AC_DEFUN([AC_PROG_NM], []) - -# _LT_CHECK_SHAREDLIB_FROM_LINKLIB -# -------------------------------- -# how to determine the name of the shared library -# associated with a specific link library. -# -- PORTME fill in with the dynamic library characteristics -m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], -[m4_require([_LT_DECL_EGREP]) -m4_require([_LT_DECL_OBJDUMP]) -m4_require([_LT_DECL_DLLTOOL]) -AC_CACHE_CHECK([how to associate runtime and link libraries], -lt_cv_sharedlib_from_linklib_cmd, -[lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh; - # decide which one to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd=$ECHO - ;; -esac -]) -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - -_LT_DECL([], [sharedlib_from_linklib_cmd], [1], - [Command to associate shared and link libraries]) -])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB - - -# _LT_PATH_MANIFEST_TOOL -# ---------------------- -# locate the manifest tool -m4_defun([_LT_PATH_MANIFEST_TOOL], -[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], - [lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&AS_MESSAGE_LOG_FD - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest*]) -if test yes != "$lt_cv_path_mainfest_tool"; then - MANIFEST_TOOL=: -fi -_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl -])# _LT_PATH_MANIFEST_TOOL - - -# _LT_DLL_DEF_P([FILE]) -# --------------------- -# True iff FILE is a Windows DLL '.def' file. -# Keep in sync with func_dll_def_p in the libtool script -AC_DEFUN([_LT_DLL_DEF_P], -[dnl - test DEF = "`$SED -n dnl - -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace - -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments - -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl - -e q dnl Only consider the first "real" line - $1`" dnl -])# _LT_DLL_DEF_P - - -# LT_LIB_M -# -------- -# check for math library -AC_DEFUN([LT_LIB_M], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw) - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM=-lm) - ;; -esac -AC_SUBST([LIBM]) -])# LT_LIB_M - -# Old name: -AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_CHECK_LIBM], []) - - -# _LT_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------- -m4_defun([_LT_COMPILER_NO_RTTI], -[m4_require([_LT_TAG_COMPILER])dnl - -_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test yes = "$GCC"; then - case $cc_basename in - nvcc*) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; - *) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; - esac - - _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], - [Compiler flag to turn off builtin functions]) -])# _LT_COMPILER_NO_RTTI - - -# _LT_CMD_GLOBAL_SYMBOLS -# ---------------------- -m4_defun([_LT_CMD_GLOBAL_SYMBOLS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([LT_PATH_NM])dnl -AC_REQUIRE([LT_PATH_LD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_TAG_COMPILER])dnl - -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) - if test ia64 = "$host_cpu"; then - symcode='[[ABCDEGRST]]' - fi - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris*) - symcode='[[BDRT]]' - ;; -sco3.2v5*) - symcode='[[DT]]' - ;; -sysv4.2uw2*) - symcode='[[DT]]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[[ABDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGIRSTW]]' ;; -esac - -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Gets list of data symbols to import. - lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" - # Adjust the below global symbol transforms to fixup imported variables. - lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" - lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" - lt_c_name_lib_hook="\ - -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ - -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" -else - # Disable hooks by default. - lt_cv_sys_global_symbol_to_import= - lt_cdecl_hook= - lt_c_name_hook= - lt_c_name_lib_hook= -fi - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n"\ -$lt_cdecl_hook\ -" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ -$lt_c_name_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" - -# Transform an extracted symbol line into symbol name with lib prefix and -# symbol address. -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ -$lt_c_name_lib_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function, - # D for any global variable and I for any imported variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK ['"\ -" {last_section=section; section=\$ 3};"\ -" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ -" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ -" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ -" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ -" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx]" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if AC_TRY_EVAL(ac_compile); then - # Now try to grab the symbols. - nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE -/* DATA imports from DLLs on WIN32 can't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT@&t@_DLSYM_CONST -#elif defined __osf__ -/* This system does not cope well with relocations in const data. */ -# define LT@&t@_DLSYM_CONST -#else -# define LT@&t@_DLSYM_CONST const -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -LT@&t@_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[[]] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS=conftstm.$ac_objext - CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test yes = "$pipe_works"; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi - -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - -_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], - [Take the output of nm and produce a listing of raw symbols and C names]) -_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], - [Transform the output of nm in a proper C declaration]) -_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1], - [Transform the output of nm into a list of symbols to manually relocate]) -_LT_DECL([global_symbol_to_c_name_address], - [lt_cv_sys_global_symbol_to_c_name_address], [1], - [Transform the output of nm in a C name address pair]) -_LT_DECL([global_symbol_to_c_name_address_lib_prefix], - [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], - [Transform the output of nm in a C name address pair when lib prefix is needed]) -_LT_DECL([nm_interface], [lt_cv_nm_interface], [1], - [The name lister interface]) -_LT_DECL([], [nm_file_list_spec], [1], - [Specify filename containing input files for $NM]) -]) # _LT_CMD_GLOBAL_SYMBOLS - - -# _LT_COMPILER_PIC([TAGNAME]) -# --------------------------- -m4_defun([_LT_COMPILER_PIC], -[m4_require([_LT_TAG_COMPILER])dnl -_LT_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_TAGVAR(lt_prog_compiler_static, $1)= - -m4_if([$1], [CXX], [ - # C++ specific cases for pic, static, wl, etc. - if test yes = "$GXX"; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the '-m68020' flag to GCC prevents building anything better, - # like '-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - case $host_os in - os2*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' - ;; - esac - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix[[4-9]]*) - # All AIX code is PIC. - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - dgux*) - case $cc_basename in - ec++*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' - if test ia64 != "$host_cpu"; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - KCC*) - # KAI C++ Compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - ecpc* ) - # old Intel C++ for x86_64, which still supported -KPIC. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - icpc* ) - # Intel C++, used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) - # IBM XL 8.0, 9.0 on PPC and BlueGene - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - esac - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx*) - # Digital/Compaq C++ - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc*) - # Lucid - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - vxworks*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test yes = "$GCC"; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the '-m68020' flag to GCC prevents building anything better, - # like '-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - case $host_os in - os2*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' - ;; - esac - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' - if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" - fi - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - case $cc_basename in - nagfor*) - # NAG Fortran compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - case $host_os in - os2*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static' - ;; - esac - ;; - - hpux9* | hpux10* | hpux11*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - # old Intel for x86_64, which still supported -KPIC. - ecc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' - _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' - ;; - nagfor*) - # NAG Fortran compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - ccc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='' - ;; - *Sun\ F* | *Sun*Fortran*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - *Intel*\ [[CF]]*Compiler*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - *Portland\ Group*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - esac - ;; - - newsos6) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - rdos*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - solaris*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; - *) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; - esac - ;; - - sunos4*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - unicos*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - - uts4*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -case $host_os in - # For platforms that do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" - ;; -esac - -AC_CACHE_CHECK([for $compiler option to produce PIC], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) -_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then - _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], - [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], - [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], - [Additional compiler flags for building library objects]) - -_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], - [How to pass a linker flag through the compiler]) -# -# Check to make sure the static flag actually works. -# -wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" -_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], - _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), - $lt_tmp_static_flag, - [], - [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) -_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], - [Compiler flag to prevent dynamic linking]) -])# _LT_COMPILER_PIC - - -# _LT_LINKER_SHLIBS([TAGNAME]) -# ---------------------------- -# See if the linker supports building shared libraries. -m4_defun([_LT_LINKER_SHLIBS], -[AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -m4_if([$1], [CXX], [ - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - case $host_os in - aix[[4-9]]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to GNU nm, but means don't demangle to AIX nm. - # Without the "-l" option, or with the "-B" option, AIX nm treats - # weak defined symbols like other global defined symbols, whereas - # GNU nm marks them as "W". - # While the 'weak' keyword is ignored in the Export File, we need - # it in the Import File for the 'aix-soname' feature, so we have - # to replace the "-B" option with "-P" for AIX nm. - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds - ;; - cygwin* | mingw* | cegcc*) - case $cc_basename in - cl*) - _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - ;; - esac - ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -], [ - runpath_var= - _LT_TAGVAR(allow_undefined_flag, $1)= - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(archive_cmds, $1)= - _LT_TAGVAR(archive_expsym_cmds, $1)= - _LT_TAGVAR(compiler_needs_object, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(hardcode_automatic, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(hardcode_libdir_separator, $1)= - _LT_TAGVAR(hardcode_minus_L, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_TAGVAR(inherit_rpath, $1)=no - _LT_TAGVAR(link_all_deplibs, $1)=unknown - _LT_TAGVAR(module_cmds, $1)= - _LT_TAGVAR(module_expsym_cmds, $1)= - _LT_TAGVAR(old_archive_from_new_cmds, $1)= - _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_TAGVAR(thread_safe_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ' (' and ')$', so one must not match beginning or - # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', - # as well as any symbol that contains 'd'. - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. -dnl Note also adjust exclude_expsyms for C++ above. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test yes != "$GCC"; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd* | bitrig*) - with_gnu_ld=no - ;; - esac - - _LT_TAGVAR(ld_shlibs, $1)=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test yes = "$with_gnu_ld"; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; - *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test yes = "$lt_use_gnu_ld_interface"; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='$wl' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - supports_anon_versioning=no - case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[[3-9]]*) - # On AIX/PPC, the GNU linker is very broken - if test ia64 != "$host_cpu"; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file, use it as - # is; otherwise, prepend EXPORTS... - _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - os2*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - shrext_cmds=.dll - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test linux-dietlibc = "$host_os"; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test no = "$tmp_diet" - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - _LT_TAGVAR(whole_archive_flag_spec, $1)= - tmp_sharedflag='--shared' ;; - nagfor*) # NAGFOR 5.3 - tmp_sharedflag='-Wl,-shared' ;; - xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - - if test yes = "$supports_anon_versioning"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - tcc*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic' - ;; - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test yes = "$supports_anon_versioning"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - sunos4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then - runpath_var= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix[[4-9]]*) - if test ia64 = "$host_cpu"; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag= - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to GNU nm, but means don't demangle to AIX nm. - # Without the "-l" option, or with the "-B" option, AIX nm treats - # weak defined symbols like other global defined symbols, whereas - # GNU nm marks them as "W". - # While the 'weak' keyword is ignored in the Export File, we need - # it in the Import File for the 'aix-soname' feature, so we have - # to replace the "-B" option with "-P" for AIX nm. - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # have runtime linking enabled, and use it for executables. - # For shared libraries, we enable/disable runtime linking - # depending on the kind of the shared library created - - # when "with_aix_soname,aix_use_runtimelinking" is: - # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables - # "aix,yes" lib.so shared, rtl:yes, for executables - # lib.a static archive - # "both,no" lib.so.V(shr.o) shared, rtl:yes - # lib.a(lib.so.V) shared, rtl:no, for executables - # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a(lib.so.V) shared, rtl:no - # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a static archive - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then - aix_use_runtimelinking=yes - break - fi - done - if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then - # With aix-soname=svr4, we create the lib.so.V shared archives only, - # so we don't have lib.a shared libs to link our executables. - # We have to force runtime linking in this case. - aix_use_runtimelinking=yes - LDFLAGS="$LDFLAGS -Wl,-brtl" - fi - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='$wl-f,' - case $with_aix_soname,$aix_use_runtimelinking in - aix,*) ;; # traditional, no import file - svr4,* | *,yes) # use import file - # The Import File defines what to hardcode. - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - ;; - esac - - if test yes = "$GCC"; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`$CC -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test yes = "$aix_use_runtimelinking"; then - shared_flag="$shared_flag "'$wl-G' - fi - # Need to ensure runtime linking is disabled for the traditional - # shared library, or the linker may eventually find shared libraries - # /with/ Import File - we do not want to mix them. - shared_flag_aix='-shared' - shared_flag_svr4='-shared $wl-G' - else - # not using gcc - if test ia64 = "$host_cpu"; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test yes = "$aix_use_runtimelinking"; then - shared_flag='$wl-G' - else - shared_flag='$wl-bM:SRE' - fi - shared_flag_aix='$wl-bM:SRE' - shared_flag_svr4='$wl-G' - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag - else - if test ia64 = "$host_cpu"; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' - if test yes = "$with_gnu_ld"; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' - # -brtl affects multiple linker settings, -berok does not and is overridden later - compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' - if test svr4 != "$with_aix_soname"; then - # This is similar to how AIX traditionally builds its shared libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' - fi - if test aix != "$with_aix_soname"; then - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' - else - # used by -dlpreopen to get the symbols - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' - fi - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - bsdi[[45]]*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then - cp "$export_symbols" "$output_objdir/$soname.def"; - echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; - else - $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile=$lt_outputfile.exe - lt_tool_outputfile=$lt_tool_outputfile.exe - ;; - esac~ - if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - esac - ;; - - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2.*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9*) - if test yes = "$GCC"; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - ;; - - hpux10*) - if test yes,no = "$GCC,$with_gnu_ld"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test no = "$with_gnu_ld"; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - fi - ;; - - hpux11*) - if test yes,no = "$GCC,$with_gnu_ld"; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - m4_if($1, [], [ - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - _LT_LINKER_OPTION([if $CC understands -b], - _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], - [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) - ;; - esac - fi - if test no = "$with_gnu_ld"; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test yes = "$GCC"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], - [lt_cv_irix_exported_symbol], - [save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" - AC_LINK_IFELSE( - [AC_LANG_SOURCE( - [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], - [C++], [[int foo (void) { return 0; }]], - [Fortran 77], [[ - subroutine foo - end]], - [Fortran], [[ - subroutine foo - end]])])], - [lt_cv_irix_exported_symbol=yes], - [lt_cv_irix_exported_symbol=no]) - LDFLAGS=$save_LDFLAGS]) - if test yes = "$lt_cv_irix_exported_symbol"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' - fi - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - linux*) - case $cc_basename in - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - _LT_TAGVAR(ld_shlibs, $1)=yes - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *nto* | *qnx*) - ;; - - openbsd* | bitrig*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - fi - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - os2*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - shrext_cmds=.dll - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - osf3*) - if test yes = "$GCC"; then - _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test yes = "$GCC"; then - _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - solaris*) - _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' - if test yes = "$GCC"; then - wlarc='$wl' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='$wl' - _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands '-z linker_flag'. GCC discards it without '$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test yes = "$GCC"; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - fi - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test sequent = "$host_vendor"; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - case $host_vendor in - sni) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We CANNOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - if test sni = "$host_vendor"; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym' - ;; - esac - fi - fi -]) -AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no - -_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld - -_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl -_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl -_LT_DECL([], [extract_expsyms_cmds], [2], - [The commands to extract the exported symbol list from a shared archive]) - -# -# Do we need to explicitly link libc? -# -case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test yes,yes = "$GCC,$enable_shared"; then - case $_LT_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_CACHE_CHECK([whether -lc should be explicitly linked in], - [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), - [$RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) - _LT_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) - then - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no - else - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - ]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) - ;; - esac - fi - ;; -esac - -_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], - [Whether or not to add -lc for building shared libraries]) -_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], - [enable_shared_with_static_runtimes], [0], - [Whether or not to disallow shared libs when runtime libs are static]) -_LT_TAGDECL([], [export_dynamic_flag_spec], [1], - [Compiler flag to allow reflexive dlopens]) -_LT_TAGDECL([], [whole_archive_flag_spec], [1], - [Compiler flag to generate shared objects directly from archives]) -_LT_TAGDECL([], [compiler_needs_object], [1], - [Whether the compiler copes with passing no objects directly]) -_LT_TAGDECL([], [old_archive_from_new_cmds], [2], - [Create an old-style archive from a shared archive]) -_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], - [Create a temporary old-style archive to link instead of a shared archive]) -_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) -_LT_TAGDECL([], [archive_expsym_cmds], [2]) -_LT_TAGDECL([], [module_cmds], [2], - [Commands used to build a loadable module if different from building - a shared archive.]) -_LT_TAGDECL([], [module_expsym_cmds], [2]) -_LT_TAGDECL([], [with_gnu_ld], [1], - [Whether we are building with GNU ld or not]) -_LT_TAGDECL([], [allow_undefined_flag], [1], - [Flag that allows shared libraries with undefined symbols to be built]) -_LT_TAGDECL([], [no_undefined_flag], [1], - [Flag that enforces no undefined symbols]) -_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], - [Flag to hardcode $libdir into a binary during linking. - This must work even if $libdir does not exist]) -_LT_TAGDECL([], [hardcode_libdir_separator], [1], - [Whether we need a single "-rpath" flag with a separated argument]) -_LT_TAGDECL([], [hardcode_direct], [0], - [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes - DIR into the resulting binary]) -_LT_TAGDECL([], [hardcode_direct_absolute], [0], - [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes - DIR into the resulting binary and the resulting library dependency is - "absolute", i.e impossible to change by setting $shlibpath_var if the - library is relocated]) -_LT_TAGDECL([], [hardcode_minus_L], [0], - [Set to "yes" if using the -LDIR flag during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_shlibpath_var], [0], - [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_automatic], [0], - [Set to "yes" if building a shared library automatically hardcodes DIR - into the library and all subsequent libraries and executables linked - against it]) -_LT_TAGDECL([], [inherit_rpath], [0], - [Set to yes if linker adds runtime paths of dependent libraries - to runtime path list]) -_LT_TAGDECL([], [link_all_deplibs], [0], - [Whether libtool must link a program against all its dependency libraries]) -_LT_TAGDECL([], [always_export_symbols], [0], - [Set to "yes" if exported symbols are required]) -_LT_TAGDECL([], [export_symbols_cmds], [2], - [The commands to list exported symbols]) -_LT_TAGDECL([], [exclude_expsyms], [1], - [Symbols that should not be listed in the preloaded symbols]) -_LT_TAGDECL([], [include_expsyms], [1], - [Symbols that must always be exported]) -_LT_TAGDECL([], [prelink_cmds], [2], - [Commands necessary for linking programs (against libraries) with templates]) -_LT_TAGDECL([], [postlink_cmds], [2], - [Commands necessary for finishing linking programs]) -_LT_TAGDECL([], [file_list_spec], [1], - [Specify filename containing input files]) -dnl FIXME: Not yet implemented -dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], -dnl [Compiler flag to generate thread safe objects]) -])# _LT_LINKER_SHLIBS - - -# _LT_LANG_C_CONFIG([TAG]) -# ------------------------ -# Ensure that the configuration variables for a C compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_C_CONFIG], -[m4_require([_LT_DECL_EGREP])dnl -lt_save_CC=$CC -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - -_LT_TAG_COMPILER -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - LT_SYS_DLOPEN_SELF - _LT_CMD_STRIPLIB - - # Report what library types will actually be built - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test no = "$can_build_shared" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test yes = "$enable_shared" && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[[4-9]]*) - if test ia64 != "$host_cpu"; then - case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in - yes,aix,yes) ;; # shared object as lib.so file only - yes,svr4,*) ;; # shared object as lib.so archive member only - yes,*) enable_static=no ;; # shared object in lib.a archive as well - esac - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test yes = "$enable_shared" || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_CONFIG($1) -fi -AC_LANG_POP -CC=$lt_save_CC -])# _LT_LANG_C_CONFIG - - -# _LT_LANG_CXX_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a C++ compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_CXX_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl -if test -n "$CXX" && ( test no != "$CXX" && - ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) || - (test g++ != "$CXX"))); then - AC_PROG_CXXCPP -else - _lt_caught_CXX_error=yes -fi - -AC_LANG_PUSH(C++) -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(compiler_needs_object, $1)=no -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for C++ test sources. -ac_ext=cpp - -# Object file extension for compiled C++ test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the CXX compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test yes != "$_lt_caught_CXX_error"; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="int some_variable = 0;" - - # Code to be used in simple link tests - lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC - lt_save_CFLAGS=$CFLAGS - lt_save_LD=$LD - lt_save_GCC=$GCC - GCC=$GXX - lt_save_with_gnu_ld=$with_gnu_ld - lt_save_path_LD=$lt_cv_path_LD - if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx - else - $as_unset lt_cv_prog_gnu_ld - fi - if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX - else - $as_unset lt_cv_path_LD - fi - test -z "${LDCXX+set}" || LD=$LDCXX - CC=${CXX-"c++"} - CFLAGS=$CXXFLAGS - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - # We don't want -fno-exception when compiling C++ code, so set the - # no_builtin_flag separately - if test yes = "$GXX"; then - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - else - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - fi - - if test yes = "$GXX"; then - # Set up default GNU C++ configuration - - LT_PATH_LD - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test yes = "$with_gnu_ld"; then - _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='$wl' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | - $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - GXX=no - with_gnu_ld=no - wlarc= - fi - - # PORTME: fill in a description of your system's C++ link characteristics - AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) - _LT_TAGVAR(ld_shlibs, $1)=yes - case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aix[[4-9]]*) - if test ia64 = "$host_cpu"; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag= - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # have runtime linking enabled, and use it for executables. - # For shared libraries, we enable/disable runtime linking - # depending on the kind of the shared library created - - # when "with_aix_soname,aix_use_runtimelinking" is: - # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables - # "aix,yes" lib.so shared, rtl:yes, for executables - # lib.a static archive - # "both,no" lib.so.V(shr.o) shared, rtl:yes - # lib.a(lib.so.V) shared, rtl:no, for executables - # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a(lib.so.V) shared, rtl:no - # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a static archive - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then - # With aix-soname=svr4, we create the lib.so.V shared archives only, - # so we don't have lib.a shared libs to link our executables. - # We have to force runtime linking in this case. - aix_use_runtimelinking=yes - LDFLAGS="$LDFLAGS -Wl,-brtl" - fi - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='$wl-f,' - case $with_aix_soname,$aix_use_runtimelinking in - aix,*) ;; # no import file - svr4,* | *,yes) # use import file - # The Import File defines what to hardcode. - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - ;; - esac - - if test yes = "$GXX"; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`$CC -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - if test yes = "$aix_use_runtimelinking"; then - shared_flag=$shared_flag' $wl-G' - fi - # Need to ensure runtime linking is disabled for the traditional - # shared library, or the linker may eventually find shared libraries - # /with/ Import File - we do not want to mix them. - shared_flag_aix='-shared' - shared_flag_svr4='-shared $wl-G' - else - # not using gcc - if test ia64 = "$host_cpu"; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test yes = "$aix_use_runtimelinking"; then - shared_flag='$wl-G' - else - shared_flag='$wl-bM:SRE' - fi - shared_flag_aix='$wl-bM:SRE' - shared_flag_svr4='$wl-G' - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to - # export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - # The "-G" linker flag allows undefined symbols. - _LT_TAGVAR(no_undefined_flag, $1)='-bernotok' - # Determine the default libpath from the value encoded in an empty - # executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" - - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag - else - if test ia64 = "$host_cpu"; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok' - if test yes = "$with_gnu_ld"; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' - # -brtl affects multiple linker settings, -berok does not and is overridden later - compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`' - if test svr4 != "$with_aix_soname"; then - # This is similar to how AIX traditionally builds its shared - # libraries. Need -bnortl late, we may have -brtl in LDFLAGS. - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' - fi - if test aix != "$with_aix_soname"; then - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' - else - # used by -dlpreopen to get the symbols - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir' - fi - _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d' - fi - fi - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - cygwin* | mingw* | pw32* | cegcc*) - case $GXX,$cc_basename in - ,cl* | no,cl*) - # Native MSVC - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then - cp "$export_symbols" "$output_objdir/$soname.def"; - echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; - else - $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile=$lt_outputfile.exe - lt_tool_outputfile=$lt_tool_outputfile.exe - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # g++ - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file, use it as - # is; otherwise, prepend EXPORTS... - _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - os2*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - shrext_cmds=.dll - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - freebsd2.*) - # C++ shared libraries reported to be fairly broken before - # switch to ELF - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - freebsd-elf*) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - - freebsd* | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - hpux9*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test yes = "$GXX"; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - hpux10*|hpux11*) - if test no = "$with_gnu_ld"; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test yes = "$GXX"; then - if test no = "$with_gnu_ld"; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test yes = "$GXX"; then - if test no = "$with_gnu_ld"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib' - fi - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc* | ecpc* ) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - case `$CC -V` in - *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) - _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' - _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ - $RANLIB $oldlib' - _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 6 and above use weak symbols - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - ;; - cxx*) - # Compaq C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' - ;; - xl* | mpixl* | bgxl*) - # IBM XL 8.0 on PPC, with GNU ld - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic' - _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - if test yes = "$supports_anon_versioning"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' - fi - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. - output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - esac - ;; - esac - ;; - - lynxos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - m88k*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - - *nto* | *qnx*) - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - openbsd* | bitrig*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E' - _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' - fi - output_verbose_link_cmd=func_echo_all - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - case $host in - osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; - esac - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - case $host in - osf3*) - _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - ;; - *) - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~ - $RM $lib.exp' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test yes,no = "$GXX,$with_gnu_ld"; then - _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*' - case $host in - osf3*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - psos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - solaris*) - case $cc_basename in - CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(archive_cmds_need_lc,$1)=yes - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands '-z linker_flag'. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - - output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test yes,no = "$GXX,$with_gnu_ld"; then - _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs' - if $CC --version | $GREP -v '^2\.7' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - else - # g++ 2.7 appears to require '-G' NOT '-shared' on this - # platform. - _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - fi - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir' - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' - ;; - esac - fi - ;; - esac - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We CANNOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport' - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ - '"$_LT_TAGVAR(old_archive_cmds, $1)" - _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ - '"$_LT_TAGVAR(reload_cmds, $1)" - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - vxworks*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) - test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no - - _LT_TAGVAR(GCC, $1)=$GXX - _LT_TAGVAR(LD, $1)=$LD - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS - LDCXX=$LD - LD=$lt_save_LD - GCC=$lt_save_GCC - with_gnu_ld=$lt_save_with_gnu_ld - lt_cv_path_LDCXX=$lt_cv_path_LD - lt_cv_path_LD=$lt_save_path_LD - lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld - lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -fi # test yes != "$_lt_caught_CXX_error" - -AC_LANG_POP -])# _LT_LANG_CXX_CONFIG - - -# _LT_FUNC_STRIPNAME_CNF -# ---------------------- -# func_stripname_cnf prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# -# This function is identical to the (non-XSI) version of func_stripname, -# except this one can be used by m4 code that may be executed by configure, -# rather than the libtool script. -m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl -AC_REQUIRE([_LT_DECL_SED]) -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) -func_stripname_cnf () -{ - case @S|@2 in - .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;; - *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;; - esac -} # func_stripname_cnf -])# _LT_FUNC_STRIPNAME_CNF - - -# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) -# --------------------------------- -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -m4_defun([_LT_SYS_HIDDEN_LIBDEPS], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl -# Dependencies to place before and after the object being linked: -_LT_TAGVAR(predep_objects, $1)= -_LT_TAGVAR(postdep_objects, $1)= -_LT_TAGVAR(predeps, $1)= -_LT_TAGVAR(postdeps, $1)= -_LT_TAGVAR(compiler_lib_search_path, $1)= - -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF -int a; -void foo (void) { a = 0; } -_LT_EOF -], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF -class Foo -{ -public: - Foo (void) { a = 0; } -private: - int a; -}; -_LT_EOF -], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer*4 a - a=0 - return - end -_LT_EOF -], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer a - a=0 - return - end -_LT_EOF -], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF -public class foo { - private int a; - public void bar (void) { - a = 0; - } -}; -_LT_EOF -], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF -package foo -func foo() { -} -_LT_EOF -]) - -_lt_libdeps_save_CFLAGS=$CFLAGS -case "$CC $CFLAGS " in #( -*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; -esac - -dnl Parse the compiler output and extract the necessary -dnl objects, libraries and library flags. -if AC_TRY_EVAL(ac_compile); then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - for p in `eval "$output_verbose_link_cmd"`; do - case $prev$p in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test x-L = "$p" || - test x-R = "$p"; then - prev=$p - continue - fi - - # Expand the sysroot to ease extracting the directories later. - if test -z "$prev"; then - case $p in - -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; - -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; - -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; - esac - fi - case $p in - =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; - esac - if test no = "$pre_test_object_deps_done"; then - case $prev in - -L | -R) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then - _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p - else - _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$_LT_TAGVAR(postdeps, $1)"; then - _LT_TAGVAR(postdeps, $1)=$prev$p - else - _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p" - fi - fi - prev= - ;; - - *.lto.$objext) ;; # Ignore GCC LTO objects - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - - if test no = "$pre_test_object_deps_done"; then - if test -z "$_LT_TAGVAR(predep_objects, $1)"; then - _LT_TAGVAR(predep_objects, $1)=$p - else - _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" - fi - else - if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then - _LT_TAGVAR(postdep_objects, $1)=$p - else - _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" - fi - fi - ;; - - *) ;; # Ignore the rest. - - esac - done - - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling $1 test program" -fi - -$RM -f confest.$objext -CFLAGS=$_lt_libdeps_save_CFLAGS - -# PORTME: override above test on systems where it is broken -m4_if([$1], [CXX], -[case $host_os in -interix[[3-9]]*) - # Interix 3.5 installs completely hosed .la files for C++, so rather than - # hack all around it, let's just trust "g++" to DTRT. - _LT_TAGVAR(predep_objects,$1)= - _LT_TAGVAR(postdep_objects,$1)= - _LT_TAGVAR(postdeps,$1)= - ;; -esac -]) - -case " $_LT_TAGVAR(postdeps, $1) " in -*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; -esac - _LT_TAGVAR(compiler_lib_search_dirs, $1)= -if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then - _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'` -fi -_LT_TAGDECL([], [compiler_lib_search_dirs], [1], - [The directories searched by this compiler when creating a shared library]) -_LT_TAGDECL([], [predep_objects], [1], - [Dependencies to place before and after the objects being linked to - create a shared library]) -_LT_TAGDECL([], [postdep_objects], [1]) -_LT_TAGDECL([], [predeps], [1]) -_LT_TAGDECL([], [postdeps], [1]) -_LT_TAGDECL([], [compiler_lib_search_path], [1], - [The library search path used internally by the compiler when linking - a shared library]) -])# _LT_SYS_HIDDEN_LIBDEPS - - -# _LT_LANG_F77_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a Fortran 77 compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_F77_CONFIG], -[AC_LANG_PUSH(Fortran 77) -if test -z "$F77" || test no = "$F77"; then - _lt_disable_F77=yes -fi - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for f77 test sources. -ac_ext=f - -# Object file extension for compiled f77 test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the F77 compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test yes != "$_lt_disable_F77"; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC - lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS - CC=${F77-"f77"} - CFLAGS=$FFLAGS - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - GCC=$G77 - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test no = "$can_build_shared" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test yes = "$enable_shared" && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test ia64 != "$host_cpu"; then - case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in - yes,aix,yes) ;; # shared object as lib.so file only - yes,svr4,*) ;; # shared object as lib.so archive member only - yes,*) enable_static=no ;; # shared object in lib.a archive as well - esac - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test yes = "$enable_shared" || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)=$G77 - _LT_TAGVAR(LD, $1)=$LD - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS -fi # test yes != "$_lt_disable_F77" - -AC_LANG_POP -])# _LT_LANG_F77_CONFIG - - -# _LT_LANG_FC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for a Fortran compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_FC_CONFIG], -[AC_LANG_PUSH(Fortran) - -if test -z "$FC" || test no = "$FC"; then - _lt_disable_FC=yes -fi - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for fc test sources. -ac_ext=${ac_fc_srcext-f} - -# Object file extension for compiled fc test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the FC compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test yes != "$_lt_disable_FC"; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC - lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS - CC=${FC-"f95"} - CFLAGS=$FCFLAGS - compiler=$CC - GCC=$ac_cv_fc_compiler_gnu - - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test no = "$can_build_shared" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test yes = "$enable_shared" && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test ia64 != "$host_cpu"; then - case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in - yes,aix,yes) ;; # shared object as lib.so file only - yes,svr4,*) ;; # shared object as lib.so archive member only - yes,*) enable_static=no ;; # shared object in lib.a archive as well - esac - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test yes = "$enable_shared" || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu - _LT_TAGVAR(LD, $1)=$LD - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS -fi # test yes != "$_lt_disable_FC" - -AC_LANG_POP -])# _LT_LANG_FC_CONFIG - - -# _LT_LANG_GCJ_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for the GNU Java Compiler compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_GCJ_CONFIG], -[AC_REQUIRE([LT_PROG_GCJ])dnl -AC_LANG_SAVE - -# Source file extension for Java test sources. -ac_ext=java - -# Object file extension for compiled Java test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}" - -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC=yes -CC=${GCJ-"gcj"} -CFLAGS=$GCJFLAGS -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)=$LD -_LT_CC_BASENAME([$compiler]) - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -_LT_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) -fi - -AC_LANG_RESTORE - -GCC=$lt_save_GCC -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_GCJ_CONFIG - - -# _LT_LANG_GO_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for the GNU Go compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_GO_CONFIG], -[AC_REQUIRE([LT_PROG_GO])dnl -AC_LANG_SAVE - -# Source file extension for Go test sources. -ac_ext=go - -# Object file extension for compiled Go test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="package main; func main() { }" - -# Code to be used in simple link tests -lt_simple_link_test_code='package main; func main() { }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC=yes -CC=${GOC-"gccgo"} -CFLAGS=$GOFLAGS -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)=$LD -_LT_CC_BASENAME([$compiler]) - -# Go did not exist at the time GCC didn't implicitly link libc in. -_LT_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) -fi - -AC_LANG_RESTORE - -GCC=$lt_save_GCC -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_GO_CONFIG - - -# _LT_LANG_RC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for the Windows resource compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to 'libtool'. -m4_defun([_LT_LANG_RC_CONFIG], -[AC_REQUIRE([LT_PROG_RC])dnl -AC_LANG_SAVE - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code=$lt_simple_compile_test_code - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC= -CC=${RC-"windres"} -CFLAGS= -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) -_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - -if test -n "$compiler"; then - : - _LT_CONFIG($1) -fi - -GCC=$lt_save_GCC -AC_LANG_RESTORE -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_RC_CONFIG - - -# LT_PROG_GCJ -# ----------- -AC_DEFUN([LT_PROG_GCJ], -[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], - [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], - [AC_CHECK_TOOL(GCJ, gcj,) - test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS)])])[]dnl -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_GCJ], []) - - -# LT_PROG_GO -# ---------- -AC_DEFUN([LT_PROG_GO], -[AC_CHECK_TOOL(GOC, gccgo,) -]) - - -# LT_PROG_RC -# ---------- -AC_DEFUN([LT_PROG_RC], -[AC_CHECK_TOOL(RC, windres,) -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_RC], []) - - -# _LT_DECL_EGREP -# -------------- -# If we don't have a new enough Autoconf to choose the best grep -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_EGREP], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_REQUIRE([AC_PROG_FGREP])dnl -test -z "$GREP" && GREP=grep -_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) -_LT_DECL([], [EGREP], [1], [An ERE matcher]) -_LT_DECL([], [FGREP], [1], [A literal string matcher]) -dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too -AC_SUBST([GREP]) -]) - - -# _LT_DECL_OBJDUMP -# -------------- -# If we don't have a new enough Autoconf to choose the best objdump -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_OBJDUMP], -[AC_CHECK_TOOL(OBJDUMP, objdump, false) -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) -AC_SUBST([OBJDUMP]) -]) - -# _LT_DECL_DLLTOOL -# ---------------- -# Ensure DLLTOOL variable is set. -m4_defun([_LT_DECL_DLLTOOL], -[AC_CHECK_TOOL(DLLTOOL, dlltool, false) -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) -AC_SUBST([DLLTOOL]) -]) - -# _LT_DECL_SED -# ------------ -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -m4_defun([_LT_DECL_SED], -[AC_PROG_SED -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" -_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) -_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], - [Sed that helps us avoid accidentally triggering echo(1) options like -n]) -])# _LT_DECL_SED - -m4_ifndef([AC_PROG_SED], [ -############################################################ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -############################################################ - -m4_defun([AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f "$lt_ac_sed" && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test 10 -lt "$lt_ac_count" && break - lt_ac_count=`expr $lt_ac_count + 1` - if test "$lt_ac_count" -gt "$lt_ac_max"; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_SUBST([SED]) -AC_MSG_RESULT([$SED]) -])#AC_PROG_SED -])#m4_ifndef - -# Old name: -AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_SED], []) - - -# _LT_CHECK_SHELL_FEATURES -# ------------------------ -# Find out whether the shell is Bourne or XSI compatible, -# or has some other useful features. -m4_defun([_LT_CHECK_SHELL_FEATURES], -[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi -_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac -_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl -_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl -])# _LT_CHECK_SHELL_FEATURES - - -# _LT_PATH_CONVERSION_FUNCTIONS -# ----------------------------- -# Determine what file name conversion functions should be used by -# func_to_host_file (and, implicitly, by func_to_host_path). These are needed -# for certain cross-compile configurations and native mingw. -m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_MSG_CHECKING([how to convert $build file names to $host format]) -AC_CACHE_VAL(lt_cv_to_host_file_cmd, -[case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac -]) -to_host_file_cmd=$lt_cv_to_host_file_cmd -AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) -_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], - [0], [convert $build file names to $host format])dnl - -AC_MSG_CHECKING([how to convert $build file names to toolchain format]) -AC_CACHE_VAL(lt_cv_to_tool_file_cmd, -[#assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac -]) -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) -_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], - [0], [convert $build files to toolchain format])dnl -])# _LT_PATH_CONVERSION_FUNCTIONS diff -Nru hitori-3.22.4/m4/lt~obsolete.m4 hitori-3.31.0/m4/lt~obsolete.m4 --- hitori-3.22.4/m4/lt~obsolete.m4 2017-10-02 08:07:51.000000000 +0000 +++ hitori-3.31.0/m4/lt~obsolete.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,99 +0,0 @@ -# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- -# -# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software -# Foundation, Inc. -# Written by Scott James Remnant, 2004. -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 5 lt~obsolete.m4 - -# These exist entirely to fool aclocal when bootstrapping libtool. -# -# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN), -# which have later been changed to m4_define as they aren't part of the -# exported API, or moved to Autoconf or Automake where they belong. -# -# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN -# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us -# using a macro with the same name in our local m4/libtool.m4 it'll -# pull the old libtool.m4 in (it doesn't see our shiny new m4_define -# and doesn't know about Autoconf macros at all.) -# -# So we provide this file, which has a silly filename so it's always -# included after everything else. This provides aclocal with the -# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything -# because those macros already exist, or will be overwritten later. -# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. -# -# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. -# Yes, that means every name once taken will need to remain here until -# we give up compatibility with versions before 1.7, at which point -# we need to keep only those names which we still refer to. - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) - -m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) -m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) -m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) -m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) -m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) -m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) -m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) -m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) -m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) -m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) -m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) -m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) -m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) -m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) -m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) -m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) -m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) -m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) -m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) -m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) -m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) -m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) -m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) -m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) -m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) -m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) -m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) -m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) -m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) -m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) -m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) -m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) -m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) -m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) -m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) -m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) -m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) -m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) -m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) -m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) -m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) -m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) -m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) -m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) -m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) -m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) -m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) -m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) -m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) -m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) diff -Nru hitori-3.22.4/m4/ltoptions.m4 hitori-3.31.0/m4/ltoptions.m4 --- hitori-3.22.4/m4/ltoptions.m4 2017-10-02 08:07:50.000000000 +0000 +++ hitori-3.31.0/m4/ltoptions.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,437 +0,0 @@ -# Helper functions for option handling. -*- Autoconf -*- -# -# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software -# Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 8 ltoptions.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) - - -# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) -# ------------------------------------------ -m4_define([_LT_MANGLE_OPTION], -[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) - - -# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) -# --------------------------------------- -# Set option OPTION-NAME for macro MACRO-NAME, and if there is a -# matching handler defined, dispatch to it. Other OPTION-NAMEs are -# saved as a flag. -m4_define([_LT_SET_OPTION], -[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl -m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), - _LT_MANGLE_DEFUN([$1], [$2]), - [m4_warning([Unknown $1 option '$2'])])[]dnl -]) - - -# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) -# ------------------------------------------------------------ -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -m4_define([_LT_IF_OPTION], -[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) - - -# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) -# ------------------------------------------------------- -# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME -# are set. -m4_define([_LT_UNLESS_OPTIONS], -[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), - [m4_define([$0_found])])])[]dnl -m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 -])[]dnl -]) - - -# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) -# ---------------------------------------- -# OPTION-LIST is a space-separated list of Libtool options associated -# with MACRO-NAME. If any OPTION has a matching handler declared with -# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about -# the unknown option and exit. -m4_defun([_LT_SET_OPTIONS], -[# Set options -m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [_LT_SET_OPTION([$1], _LT_Option)]) - -m4_if([$1],[LT_INIT],[ - dnl - dnl Simply set some default values (i.e off) if boolean options were not - dnl specified: - _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no - ]) - _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no - ]) - dnl - dnl If no reference was made to various pairs of opposing options, then - dnl we run the default mode handler for the pair. For example, if neither - dnl 'shared' nor 'disable-shared' was passed, we enable building of shared - dnl archives by default: - _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) - _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], - [_LT_ENABLE_FAST_INSTALL]) - _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4], - [_LT_WITH_AIX_SONAME([aix])]) - ]) -])# _LT_SET_OPTIONS - - -## --------------------------------- ## -## Macros to handle LT_INIT options. ## -## --------------------------------- ## - -# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) -# ----------------------------------------- -m4_define([_LT_MANGLE_DEFUN], -[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) - - -# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) -# ----------------------------------------------- -m4_define([LT_OPTION_DEFINE], -[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl -])# LT_OPTION_DEFINE - - -# dlopen -# ------ -LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes -]) - -AU_DEFUN([AC_LIBTOOL_DLOPEN], -[_LT_SET_OPTION([LT_INIT], [dlopen]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the 'dlopen' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) - - -# win32-dll -# --------- -# Declare package support for building win32 dll's. -LT_OPTION_DEFINE([LT_INIT], [win32-dll], -[enable_win32_dll=yes - -case $host in -*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; -esac - -test -z "$AS" && AS=as -_LT_DECL([], [AS], [1], [Assembler program])dnl - -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl - -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl -])# win32-dll - -AU_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -_LT_SET_OPTION([LT_INIT], [win32-dll]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the 'win32-dll' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) - - -# _LT_ENABLE_SHARED([DEFAULT]) -# ---------------------------- -# implement the --enable-shared flag, and supports the 'shared' and -# 'disable-shared' LT_INIT options. -# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. -m4_define([_LT_ENABLE_SHARED], -[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([shared], - [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS=$lt_save_ifs - ;; - esac], - [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) - - _LT_DECL([build_libtool_libs], [enable_shared], [0], - [Whether or not to build shared libraries]) -])# _LT_ENABLE_SHARED - -LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) -]) - -AC_DEFUN([AC_DISABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], [disable-shared]) -]) - -AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_SHARED], []) -dnl AC_DEFUN([AM_DISABLE_SHARED], []) - - - -# _LT_ENABLE_STATIC([DEFAULT]) -# ---------------------------- -# implement the --enable-static flag, and support the 'static' and -# 'disable-static' LT_INIT options. -# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. -m4_define([_LT_ENABLE_STATIC], -[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([static], - [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS=$lt_save_ifs - ;; - esac], - [enable_static=]_LT_ENABLE_STATIC_DEFAULT) - - _LT_DECL([build_old_libs], [enable_static], [0], - [Whether or not to build static libraries]) -])# _LT_ENABLE_STATIC - -LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) -]) - -AC_DEFUN([AC_DISABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], [disable-static]) -]) - -AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_STATIC], []) -dnl AC_DEFUN([AM_DISABLE_STATIC], []) - - - -# _LT_ENABLE_FAST_INSTALL([DEFAULT]) -# ---------------------------------- -# implement the --enable-fast-install flag, and support the 'fast-install' -# and 'disable-fast-install' LT_INIT options. -# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'. -m4_define([_LT_ENABLE_FAST_INSTALL], -[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([fast-install], - [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS=$lt_save_ifs - ;; - esac], - [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) - -_LT_DECL([fast_install], [enable_fast_install], [0], - [Whether or not to optimize for fast installation])dnl -])# _LT_ENABLE_FAST_INSTALL - -LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) - -# Old names: -AU_DEFUN([AC_ENABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the 'fast-install' option into LT_INIT's first parameter.]) -]) - -AU_DEFUN([AC_DISABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the 'disable-fast-install' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) -dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) - - -# _LT_WITH_AIX_SONAME([DEFAULT]) -# ---------------------------------- -# implement the --with-aix-soname flag, and support the `aix-soname=aix' -# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT -# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'. -m4_define([_LT_WITH_AIX_SONAME], -[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl -shared_archive_member_spec= -case $host,$enable_shared in -power*-*-aix[[5-9]]*,yes) - AC_MSG_CHECKING([which variant of shared library versioning to provide]) - AC_ARG_WITH([aix-soname], - [AS_HELP_STRING([--with-aix-soname=aix|svr4|both], - [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])], - [case $withval in - aix|svr4|both) - ;; - *) - AC_MSG_ERROR([Unknown argument to --with-aix-soname]) - ;; - esac - lt_cv_with_aix_soname=$with_aix_soname], - [AC_CACHE_VAL([lt_cv_with_aix_soname], - [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT) - with_aix_soname=$lt_cv_with_aix_soname]) - AC_MSG_RESULT([$with_aix_soname]) - if test aix != "$with_aix_soname"; then - # For the AIX way of multilib, we name the shared archive member - # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', - # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. - # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, - # the AIX toolchain works better with OBJECT_MODE set (default 32). - if test 64 = "${OBJECT_MODE-32}"; then - shared_archive_member_spec=shr_64 - else - shared_archive_member_spec=shr - fi - fi - ;; -*) - with_aix_soname=aix - ;; -esac - -_LT_DECL([], [shared_archive_member_spec], [0], - [Shared archive member basename, for filename based shared library versioning on AIX])dnl -])# _LT_WITH_AIX_SONAME - -LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])]) -LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])]) -LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])]) - - -# _LT_WITH_PIC([MODE]) -# -------------------- -# implement the --with-pic flag, and support the 'pic-only' and 'no-pic' -# LT_INIT options. -# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'. -m4_define([_LT_WITH_PIC], -[AC_ARG_WITH([pic], - [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [lt_p=${PACKAGE-default} - case $withval in - yes|no) pic_mode=$withval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for lt_pkg in $withval; do - IFS=$lt_save_ifs - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS=$lt_save_ifs - ;; - esac], - [pic_mode=m4_default([$1], [default])]) - -_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl -])# _LT_WITH_PIC - -LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) - -# Old name: -AU_DEFUN([AC_LIBTOOL_PICMODE], -[_LT_SET_OPTION([LT_INIT], [pic-only]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the 'pic-only' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) - -## ----------------- ## -## LTDL_INIT Options ## -## ----------------- ## - -m4_define([_LTDL_MODE], []) -LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], - [m4_define([_LTDL_MODE], [nonrecursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [recursive], - [m4_define([_LTDL_MODE], [recursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [subproject], - [m4_define([_LTDL_MODE], [subproject])]) - -m4_define([_LTDL_TYPE], []) -LT_OPTION_DEFINE([LTDL_INIT], [installable], - [m4_define([_LTDL_TYPE], [installable])]) -LT_OPTION_DEFINE([LTDL_INIT], [convenience], - [m4_define([_LTDL_TYPE], [convenience])]) diff -Nru hitori-3.22.4/m4/ltsugar.m4 hitori-3.31.0/m4/ltsugar.m4 --- hitori-3.22.4/m4/ltsugar.m4 2017-10-02 08:07:51.000000000 +0000 +++ hitori-3.31.0/m4/ltsugar.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,124 +0,0 @@ -# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- -# -# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software -# Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 6 ltsugar.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) - - -# lt_join(SEP, ARG1, [ARG2...]) -# ----------------------------- -# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their -# associated separator. -# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier -# versions in m4sugar had bugs. -m4_define([lt_join], -[m4_if([$#], [1], [], - [$#], [2], [[$2]], - [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) -m4_define([_lt_join], -[m4_if([$#$2], [2], [], - [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) - - -# lt_car(LIST) -# lt_cdr(LIST) -# ------------ -# Manipulate m4 lists. -# These macros are necessary as long as will still need to support -# Autoconf-2.59, which quotes differently. -m4_define([lt_car], [[$1]]) -m4_define([lt_cdr], -[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], - [$#], 1, [], - [m4_dquote(m4_shift($@))])]) -m4_define([lt_unquote], $1) - - -# lt_append(MACRO-NAME, STRING, [SEPARATOR]) -# ------------------------------------------ -# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'. -# Note that neither SEPARATOR nor STRING are expanded; they are appended -# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). -# No SEPARATOR is output if MACRO-NAME was previously undefined (different -# than defined and empty). -# -# This macro is needed until we can rely on Autoconf 2.62, since earlier -# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. -m4_define([lt_append], -[m4_define([$1], - m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) - - - -# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) -# ---------------------------------------------------------- -# Produce a SEP delimited list of all paired combinations of elements of -# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list -# has the form PREFIXmINFIXSUFFIXn. -# Needed until we can rely on m4_combine added in Autoconf 2.62. -m4_define([lt_combine], -[m4_if(m4_eval([$# > 3]), [1], - [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl -[[m4_foreach([_Lt_prefix], [$2], - [m4_foreach([_Lt_suffix], - ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, - [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) - - -# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) -# ----------------------------------------------------------------------- -# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited -# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. -m4_define([lt_if_append_uniq], -[m4_ifdef([$1], - [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], - [lt_append([$1], [$2], [$3])$4], - [$5])], - [lt_append([$1], [$2], [$3])$4])]) - - -# lt_dict_add(DICT, KEY, VALUE) -# ----------------------------- -m4_define([lt_dict_add], -[m4_define([$1($2)], [$3])]) - - -# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) -# -------------------------------------------- -m4_define([lt_dict_add_subkey], -[m4_define([$1($2:$3)], [$4])]) - - -# lt_dict_fetch(DICT, KEY, [SUBKEY]) -# ---------------------------------- -m4_define([lt_dict_fetch], -[m4_ifval([$3], - m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), - m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) - - -# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) -# ----------------------------------------------------------------- -m4_define([lt_if_dict_fetch], -[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], - [$5], - [$6])]) - - -# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) -# -------------------------------------------------------------- -m4_define([lt_dict_filter], -[m4_if([$5], [], [], - [lt_join(m4_quote(m4_default([$4], [[, ]])), - lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), - [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl -]) diff -Nru hitori-3.22.4/m4/ltversion.m4 hitori-3.31.0/m4/ltversion.m4 --- hitori-3.22.4/m4/ltversion.m4 2017-10-02 08:07:51.000000000 +0000 +++ hitori-3.31.0/m4/ltversion.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ -# ltversion.m4 -- version numbers -*- Autoconf -*- -# -# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# @configure_input@ - -# serial 4179 ltversion.m4 -# This file is part of GNU Libtool - -m4_define([LT_PACKAGE_VERSION], [2.4.6]) -m4_define([LT_PACKAGE_REVISION], [2.4.6]) - -AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.4.6' -macro_revision='2.4.6' -_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) -_LT_DECL(, macro_revision, 0) -]) diff -Nru hitori-3.22.4/m4/nls.m4 hitori-3.31.0/m4/nls.m4 --- hitori-3.22.4/m4/nls.m4 2016-12-20 13:31:44.000000000 +0000 +++ hitori-3.31.0/m4/nls.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,32 +0,0 @@ -# nls.m4 serial 5 (gettext-0.18) -dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014, 2016 Free Software -dnl Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -AC_PREREQ([2.50]) - -AC_DEFUN([AM_NLS], -[ - AC_MSG_CHECKING([whether NLS is requested]) - dnl Default is enabled NLS - AC_ARG_ENABLE([nls], - [ --disable-nls do not use Native Language Support], - USE_NLS=$enableval, USE_NLS=yes) - AC_MSG_RESULT([$USE_NLS]) - AC_SUBST([USE_NLS]) -]) diff -Nru hitori-3.22.4/m4/pkg.m4 hitori-3.31.0/m4/pkg.m4 --- hitori-3.22.4/m4/pkg.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/pkg.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,343 +0,0 @@ -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# serial 11 (pkg-config-0.29.1) - -dnl Copyright © 2004 Scott James Remnant . -dnl Copyright © 2012-2015 Dan Nicholson -dnl -dnl This program is free software; you can redistribute it and/or modify -dnl it under the terms of the GNU General Public License as published by -dnl the Free Software Foundation; either version 2 of the License, or -dnl (at your option) any later version. -dnl -dnl This program is distributed in the hope that it will be useful, but -dnl WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl General Public License for more details. -dnl -dnl You should have received a copy of the GNU General Public License -dnl along with this program; if not, write to the Free Software -dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -dnl 02111-1307, USA. -dnl -dnl As a special exception to the GNU General Public License, if you -dnl distribute this file as part of a program that contains a -dnl configuration script generated by Autoconf, you may include it under -dnl the same distribution terms that you use for the rest of that -dnl program. - -dnl PKG_PREREQ(MIN-VERSION) -dnl ----------------------- -dnl Since: 0.29 -dnl -dnl Verify that the version of the pkg-config macros are at least -dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's -dnl installed version of pkg-config, this checks the developer's version -dnl of pkg.m4 when generating configure. -dnl -dnl To ensure that this macro is defined, also add: -dnl m4_ifndef([PKG_PREREQ], -dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])]) -dnl -dnl See the "Since" comment for each macro you use to see what version -dnl of the macros you require. -m4_defun([PKG_PREREQ], -[m4_define([PKG_MACROS_VERSION], [0.29.1]) -m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, - [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) -])dnl PKG_PREREQ - -dnl PKG_PROG_PKG_CONFIG([MIN-VERSION]) -dnl ---------------------------------- -dnl Since: 0.16 -dnl -dnl Search for the pkg-config tool and set the PKG_CONFIG variable to -dnl first found in the path. Checks that the version of pkg-config found -dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is -dnl used since that's the first version where most current features of -dnl pkg-config existed. -AC_DEFUN([PKG_PROG_PKG_CONFIG], -[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) -m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) -m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) -AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) -AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) -AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=m4_default([$1], [0.9.0]) - AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - PKG_CONFIG="" - fi -fi[]dnl -])dnl PKG_PROG_PKG_CONFIG - -dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -dnl ------------------------------------------------------------------- -dnl Since: 0.18 -dnl -dnl Check to see whether a particular set of modules exists. Similar to -dnl PKG_CHECK_MODULES(), but does not set variables or print errors. -dnl -dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -dnl only at the first occurence in configure.ac, so if the first place -dnl it's called might be skipped (such as if it is within an "if", you -dnl have to call PKG_CHECK_EXISTS manually -AC_DEFUN([PKG_CHECK_EXISTS], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -if test -n "$PKG_CONFIG" && \ - AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then - m4_default([$2], [:]) -m4_ifvaln([$3], [else - $3])dnl -fi]) - -dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -dnl --------------------------------------------- -dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting -dnl pkg_failed based on the result. -m4_define([_PKG_CONFIG], -[if test -n "$$1"; then - pkg_cv_[]$1="$$1" - elif test -n "$PKG_CONFIG"; then - PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` - test "x$?" != "x0" && pkg_failed=yes ], - [pkg_failed=yes]) - else - pkg_failed=untried -fi[]dnl -])dnl _PKG_CONFIG - -dnl _PKG_SHORT_ERRORS_SUPPORTED -dnl --------------------------- -dnl Internal check to see if pkg-config supports short errors. -AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi[]dnl -])dnl _PKG_SHORT_ERRORS_SUPPORTED - - -dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -dnl [ACTION-IF-NOT-FOUND]) -dnl -------------------------------------------------------------- -dnl Since: 0.4.0 -dnl -dnl Note that if there is a possibility the first call to -dnl PKG_CHECK_MODULES might not happen, you should be sure to include an -dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -AC_DEFUN([PKG_CHECK_MODULES], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl -AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl - -pkg_failed=no -AC_MSG_CHECKING([for $1]) - -_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) -_PKG_CONFIG([$1][_LIBS], [libs], [$2]) - -m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS -and $1[]_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details.]) - -if test $pkg_failed = yes; then - AC_MSG_RESULT([no]) - _PKG_SHORT_ERRORS_SUPPORTED - if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` - else - $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD - - m4_default([$4], [AC_MSG_ERROR( -[Package requirements ($2) were not met: - -$$1_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -_PKG_TEXT])[]dnl - ]) -elif test $pkg_failed = untried; then - AC_MSG_RESULT([no]) - m4_default([$4], [AC_MSG_FAILURE( -[The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -_PKG_TEXT - -To get pkg-config, see .])[]dnl - ]) -else - $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS - $1[]_LIBS=$pkg_cv_[]$1[]_LIBS - AC_MSG_RESULT([yes]) - $3 -fi[]dnl -])dnl PKG_CHECK_MODULES - - -dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -dnl [ACTION-IF-NOT-FOUND]) -dnl --------------------------------------------------------------------- -dnl Since: 0.29 -dnl -dnl Checks for existence of MODULES and gathers its build flags with -dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags -dnl and VARIABLE-PREFIX_LIBS from --libs. -dnl -dnl Note that if there is a possibility the first call to -dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to -dnl include an explicit call to PKG_PROG_PKG_CONFIG in your -dnl configure.ac. -AC_DEFUN([PKG_CHECK_MODULES_STATIC], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -_save_PKG_CONFIG=$PKG_CONFIG -PKG_CONFIG="$PKG_CONFIG --static" -PKG_CHECK_MODULES($@) -PKG_CONFIG=$_save_PKG_CONFIG[]dnl -])dnl PKG_CHECK_MODULES_STATIC - - -dnl PKG_INSTALLDIR([DIRECTORY]) -dnl ------------------------- -dnl Since: 0.27 -dnl -dnl Substitutes the variable pkgconfigdir as the location where a module -dnl should install pkg-config .pc files. By default the directory is -dnl $libdir/pkgconfig, but the default can be changed by passing -dnl DIRECTORY. The user can override through the --with-pkgconfigdir -dnl parameter. -AC_DEFUN([PKG_INSTALLDIR], -[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) -m4_pushdef([pkg_description], - [pkg-config installation directory @<:@]pkg_default[@:>@]) -AC_ARG_WITH([pkgconfigdir], - [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],, - [with_pkgconfigdir=]pkg_default) -AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) -m4_popdef([pkg_default]) -m4_popdef([pkg_description]) -])dnl PKG_INSTALLDIR - - -dnl PKG_NOARCH_INSTALLDIR([DIRECTORY]) -dnl -------------------------------- -dnl Since: 0.27 -dnl -dnl Substitutes the variable noarch_pkgconfigdir as the location where a -dnl module should install arch-independent pkg-config .pc files. By -dnl default the directory is $datadir/pkgconfig, but the default can be -dnl changed by passing DIRECTORY. The user can override through the -dnl --with-noarch-pkgconfigdir parameter. -AC_DEFUN([PKG_NOARCH_INSTALLDIR], -[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) -m4_pushdef([pkg_description], - [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@]) -AC_ARG_WITH([noarch-pkgconfigdir], - [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],, - [with_noarch_pkgconfigdir=]pkg_default) -AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) -m4_popdef([pkg_default]) -m4_popdef([pkg_description]) -])dnl PKG_NOARCH_INSTALLDIR - - -dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, -dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -dnl ------------------------------------------- -dnl Since: 0.28 -dnl -dnl Retrieves the value of the pkg-config variable for the given module. -AC_DEFUN([PKG_CHECK_VAR], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl - -_PKG_CONFIG([$1], [variable="][$3]["], [$2]) -AS_VAR_COPY([$1], [pkg_cv_][$1]) - -AS_VAR_IF([$1], [""], [$5], [$4])dnl -])dnl PKG_CHECK_VAR - -dnl PKG_WITH_MODULES(VARIABLE-PREFIX, MODULES, -dnl [ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND], -dnl [DESCRIPTION], [DEFAULT]) -dnl ------------------------------------------ -dnl -dnl Prepare a "--with-" configure option using the lowercase -dnl [VARIABLE-PREFIX] name, merging the behaviour of AC_ARG_WITH and -dnl PKG_CHECK_MODULES in a single macro. -AC_DEFUN([PKG_WITH_MODULES], -[ -m4_pushdef([with_arg], m4_tolower([$1])) - -m4_pushdef([description], - [m4_default([$5], [build with ]with_arg[ support])]) - -m4_pushdef([def_arg], [m4_default([$6], [auto])]) -m4_pushdef([def_action_if_found], [AS_TR_SH([with_]with_arg)=yes]) -m4_pushdef([def_action_if_not_found], [AS_TR_SH([with_]with_arg)=no]) - -m4_case(def_arg, - [yes],[m4_pushdef([with_without], [--without-]with_arg)], - [m4_pushdef([with_without],[--with-]with_arg)]) - -AC_ARG_WITH(with_arg, - AS_HELP_STRING(with_without, description[ @<:@default=]def_arg[@:>@]),, - [AS_TR_SH([with_]with_arg)=def_arg]) - -AS_CASE([$AS_TR_SH([with_]with_arg)], - [yes],[PKG_CHECK_MODULES([$1],[$2],$3,$4)], - [auto],[PKG_CHECK_MODULES([$1],[$2], - [m4_n([def_action_if_found]) $3], - [m4_n([def_action_if_not_found]) $4])]) - -m4_popdef([with_arg]) -m4_popdef([description]) -m4_popdef([def_arg]) - -])dnl PKG_WITH_MODULES - -dnl PKG_HAVE_WITH_MODULES(VARIABLE-PREFIX, MODULES, -dnl [DESCRIPTION], [DEFAULT]) -dnl ----------------------------------------------- -dnl -dnl Convenience macro to trigger AM_CONDITIONAL after PKG_WITH_MODULES -dnl check._[VARIABLE-PREFIX] is exported as make variable. -AC_DEFUN([PKG_HAVE_WITH_MODULES], -[ -PKG_WITH_MODULES([$1],[$2],,,[$3],[$4]) - -AM_CONDITIONAL([HAVE_][$1], - [test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"]) -])dnl PKG_HAVE_WITH_MODULES - -dnl PKG_HAVE_DEFINE_WITH_MODULES(VARIABLE-PREFIX, MODULES, -dnl [DESCRIPTION], [DEFAULT]) -dnl ------------------------------------------------------ -dnl -dnl Convenience macro to run AM_CONDITIONAL and AC_DEFINE after -dnl PKG_WITH_MODULES check. HAVE_[VARIABLE-PREFIX] is exported as make -dnl and preprocessor variable. -AC_DEFUN([PKG_HAVE_DEFINE_WITH_MODULES], -[ -PKG_HAVE_WITH_MODULES([$1],[$2],[$3],[$4]) - -AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"], - [AC_DEFINE([HAVE_][$1], 1, [Enable ]m4_tolower([$1])[ support])]) -])dnl PKG_HAVE_DEFINE_WITH_MODULES diff -Nru hitori-3.22.4/m4/po.m4 hitori-3.31.0/m4/po.m4 --- hitori-3.22.4/m4/po.m4 2017-10-02 08:07:34.000000000 +0000 +++ hitori-3.31.0/m4/po.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,453 +0,0 @@ -# po.m4 serial 24 (gettext-0.19) -dnl Copyright (C) 1995-2014, 2016 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -AC_PREREQ([2.60]) - -dnl Checks for all prerequisites of the po subdirectory. -AC_DEFUN([AM_PO_SUBDIRS], -[ - AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_INSTALL])dnl - AC_REQUIRE([AC_PROG_MKDIR_P])dnl - AC_REQUIRE([AC_PROG_SED])dnl - AC_REQUIRE([AM_NLS])dnl - - dnl Release version of the gettext macros. This is used to ensure that - dnl the gettext macros and po/Makefile.in.in are in sync. - AC_SUBST([GETTEXT_MACRO_VERSION], [0.19]) - - dnl Perform the following tests also if --disable-nls has been given, - dnl because they are needed for "make dist" to work. - - dnl Search for GNU msgfmt in the PATH. - dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. - dnl The second test excludes FreeBSD msgfmt. - AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, - [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && - (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT]) - - dnl Test whether it is GNU msgfmt >= 0.15. -changequote(,)dnl - case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; - *) MSGFMT_015=$MSGFMT ;; - esac -changequote([,])dnl - AC_SUBST([MSGFMT_015]) -changequote(,)dnl - case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; - *) GMSGFMT_015=$GMSGFMT ;; - esac -changequote([,])dnl - AC_SUBST([GMSGFMT_015]) - - dnl Search for GNU xgettext 0.12 or newer in the PATH. - dnl The first test excludes Solaris xgettext and early GNU xgettext versions. - dnl The second test excludes FreeBSD xgettext. - AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, - [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && - (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - dnl Remove leftover from FreeBSD xgettext call. - rm -f messages.po - - dnl Test whether it is GNU xgettext >= 0.15. -changequote(,)dnl - case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; - *) XGETTEXT_015=$XGETTEXT ;; - esac -changequote([,])dnl - AC_SUBST([XGETTEXT_015]) - - dnl Search for GNU msgmerge 0.11 or newer in the PATH. - AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, - [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :) - - dnl Installation directories. - dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we - dnl have to define it here, so that it can be used in po/Makefile. - test -n "$localedir" || localedir='${datadir}/locale' - AC_SUBST([localedir]) - - dnl Support for AM_XGETTEXT_OPTION. - test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= - AC_SUBST([XGETTEXT_EXTRA_OPTIONS]) - - AC_CONFIG_COMMANDS([po-directories], [[ - for ac_file in $CONFIG_FILES; do - # Support "outfile[:infile[:infile...]]" - case "$ac_file" in - *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - esac - # PO directories have a Makefile.in generated from Makefile.in.in. - case "$ac_file" in */Makefile.in) - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - # Treat a directory as a PO directory if and only if it has a - # POTFILES.in file. This allows packages to have multiple PO - # directories under different names or in different locations. - if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then - rm -f "$ac_dir/POTFILES" - test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" - gt_tab=`printf '\t'` - cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" - POMAKEFILEDEPS="POTFILES.in" - # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend - # on $ac_dir but don't depend on user-specified configuration - # parameters. - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - if test -n "$OBSOLETE_ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` - # Hide the ALL_LINGUAS assignment from automake < 1.5. - eval 'ALL_LINGUAS''=$ALL_LINGUAS_' - POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" - else - # The set of available languages was given in configure.in. - # Hide the ALL_LINGUAS assignment from automake < 1.5. - eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' - fi - # Compute POFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) - # Compute UPDATEPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) - # Compute DUMMYPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) - # Compute GMOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - UPDATEPOFILES= - DUMMYPOFILES= - GMOFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - done - fi - test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" - sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" - for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do - if test -f "$f"; then - case "$f" in - *.orig | *.bak | *~) ;; - *) cat "$f" >> "$ac_dir/Makefile" ;; - esac - fi - done - fi - ;; - esac - done]], - [# Capture the value of obsolete ALL_LINGUAS because we need it to compute - # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it - # from automake < 1.5. - eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' - # Capture the value of LINGUAS because we need it to compute CATALOGS. - LINGUAS="${LINGUAS-%UNSET%}" - ]) -]) - -dnl Postprocesses a Makefile in a directory containing PO files. -AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE], -[ - # When this code is run, in config.status, two variables have already been - # set: - # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in, - # - LINGUAS is the value of the environment variable LINGUAS at configure - # time. - -changequote(,)dnl - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - # Find a way to echo strings without interpreting backslash. - if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then - gt_echo='echo' - else - if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then - gt_echo='printf %s\n' - else - echo_func () { - cat < "$ac_file.tmp" - tab=`printf '\t'` - if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then - # Add dependencies that cannot be formulated as a simple suffix rule. - for lang in $ALL_LINGUAS; do - frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` - cat >> "$ac_file.tmp" < /dev/null; then - # Add dependencies that cannot be formulated as a simple suffix rule. - for lang in $ALL_LINGUAS; do - frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` - cat >> "$ac_file.tmp" <> "$ac_file.tmp" <, 1996. - -AC_PREREQ([2.50]) - -# Search path for a program which passes the given test. - -dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN([AM_PATH_PROG_WITH_TEST], -[ -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL([ac_cv_path_$1], -[case "[$]$1" in - [[\\/]]* | ?:[[\\/]]*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in ifelse([$5], , $PATH, [$5]); do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then - AC_MSG_RESULT([$][$1]) -else - AC_MSG_RESULT([no]) -fi -AC_SUBST([$1])dnl -]) diff -Nru hitori-3.22.4/m4/yelp.m4 hitori-3.31.0/m4/yelp.m4 --- hitori-3.22.4/m4/yelp.m4 2016-12-20 13:31:44.000000000 +0000 +++ hitori-3.31.0/m4/yelp.m4 1970-01-01 00:00:00.000000000 +0000 @@ -1,213 +0,0 @@ -AC_DEFUN([YELP_HELP_INIT], -[ -AC_REQUIRE([AC_PROG_LN_S]) -m4_pattern_allow([AM_V_at]) -m4_pattern_allow([AM_V_GEN]) -m4_pattern_allow([AM_DEFAULT_VERBOSITY]) - -YELP_LC_MEDIA_LINKS=true -YELP_LC_DIST=true - -for yelpopt in [$1]; do - case $yelpopt in - lc-media-links) YELP_LC_MEDIA_LINKS=true ;; - no-lc-media-links) YELP_LC_MEDIA_LINKS= ;; - lc-dist) YELP_LC_DIST=true ;; - no-lc-dist) YELP_LC_DIST= ;; - *) AC_MSG_ERROR([Unrecognized [YELP_HELP_INIT] option $yelpopt"]) ;; - esac -done; -AC_SUBST([YELP_LC_MEDIA_LINKS]) -AC_SUBST([YELP_LC_DIST]) - -AC_ARG_WITH([help-dir], - AS_HELP_STRING([--with-help-dir=DIR], - [path where help files are installed]),, - [with_help_dir='${datadir}/help']) -HELP_DIR="$with_help_dir" -AC_SUBST(HELP_DIR) - -AC_ARG_VAR([ITSTOOL], [Path to the `itstool` command]) -AC_CHECK_PROG([ITSTOOL], [itstool], [itstool]) -if test x"$ITSTOOL" = x; then - AC_MSG_ERROR([itstool not found]) -fi - -AC_ARG_VAR([XMLLINT], [Path to the `xmllint` command]) -AC_CHECK_PROG([XMLLINT], [xmllint], [xmllint]) -if test x"$XMLLINT" = x; then - AC_MSG_ERROR([xmllint not found]) -fi - -YELP_HELP_RULES=' -HELP_ID ?= -HELP_POT ?= -HELP_FILES ?= -HELP_EXTRA ?= -HELP_MEDIA ?= -HELP_LINGUAS ?= - -_HELP_LINGUAS = $(if $(filter environment,$(origin LINGUAS)),$(filter $(LINGUAS),$(HELP_LINGUAS)),$(HELP_LINGUAS)) -_HELP_POTFILE = $(if $(HELP_POT),$(HELP_POT),$(if $(HELP_ID),$(HELP_ID).pot)) -_HELP_POFILES = $(if $(HELP_ID),$(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).po)) -_HELP_MOFILES = $(patsubst %.po,%.mo,$(_HELP_POFILES)) -_HELP_C_FILES = $(foreach f,$(HELP_FILES),C/$(f)) -_HELP_C_EXTRA = $(foreach f,$(HELP_EXTRA),C/$(f)) -_HELP_C_MEDIA = $(foreach f,$(HELP_MEDIA),C/$(f)) -_HELP_LC_FILES = $(foreach lc,$(_HELP_LINGUAS),$(foreach f,$(HELP_FILES),$(lc)/$(f))) -_HELP_LC_STAMPS = $(foreach lc,$(_HELP_LINGUAS),$(lc)/$(lc).stamp) - -_HELP_DEFAULT_V = $(if $(AM_DEFAULT_VERBOSITY),$(AM_DEFAULT_VERBOSITY),1) -_HELP_V = $(if $(V),$(V),$(_HELP_DEFAULT_V)) -_HELP_LC_VERBOSE = $(_HELP_LC_VERBOSE_$(_HELP_V)) -_HELP_LC_VERBOSE_ = $(_HELP_LC_VERBOSE_$(_HELP_DEFAULT_V)) -_HELP_LC_VERBOSE_0 = @echo " GEN "$(dir [$]@); - -all: $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) $(_HELP_LC_FILES) $(_HELP_POFILES) - -.PHONY: pot -pot: $(_HELP_POTFILE) -$(_HELP_POTFILE): $(_HELP_C_FILES) $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) - $(AM_V_GEN)if test -d "C"; then d=; else d="$(srcdir)/"; fi; \ - $(ITSTOOL) -o "[$]@" $(foreach f,$(_HELP_C_FILES),"$${d}$(f)") - -.PHONY: repo -repo: $(_HELP_POTFILE) - $(AM_V_at)for po in $(_HELP_POFILES); do \ - if test "x[$](_HELP_V)" = "x0"; then echo " GEN $${po}"; fi; \ - msgmerge -q -o "$${po}" "$${po}" "$(_HELP_POTFILE)"; \ - done - -$(_HELP_POFILES): - $(AM_V_at)if ! test -d "$(dir [$]@)"; then mkdir "$(dir [$]@)"; fi - $(AM_V_at)if test ! -f "[$]@" -a -f "$(srcdir)/[$]@"; then cp "$(srcdir)/[$]@" "[$]@"; fi - $(AM_V_GEN)if ! test -f "[$]@"; then \ - (cd "$(dir [$]@)" && \ - $(ITSTOOL) -o "$(notdir [$]@).tmp" $(_HELP_C_FILES) && \ - mv "$(notdir [$]@).tmp" "$(notdir [$]@)"); \ - else \ - (cd "$(dir [$]@)" && \ - $(ITSTOOL) -o "$(notdir [$]@).tmp" $(_HELP_C_FILES) && \ - msgmerge -o "$(notdir [$]@)" "$(notdir [$]@)" "$(notdir [$]@).tmp" && \ - rm "$(notdir [$]@).tmp"); \ - fi - -$(_HELP_MOFILES): %.mo: %.po - $(AM_V_at)if ! test -d "$(dir [$]@)"; then mkdir "$(dir [$]@)"; fi - $(AM_V_GEN)msgfmt -o "[$]@" "$<" - -$(_HELP_LC_FILES): $(_HELP_LINGUAS) -$(_HELP_LINGUAS): $(_HELP_LC_STAMPS) -$(_HELP_LC_STAMPS): %.stamp: %.mo -$(_HELP_LC_STAMPS): $(_HELP_C_FILES) $(_HELP_C_EXTRA) - $(AM_V_at)if ! test -d "$(dir [$]@)"; then mkdir "$(dir [$]@)"; fi - $(_HELP_LC_VERBOSE)if test -d "C"; then d="../"; else d="$(abs_srcdir)/"; fi; \ - mo="$(dir [$]@)$(patsubst %/$(notdir [$]@),%,[$]@).mo"; \ - if test -f "$${mo}"; then mo="../$${mo}"; else mo="$(abs_srcdir)/$${mo}"; fi; \ - (cd "$(dir [$]@)" && $(ITSTOOL) -m "$${mo}" $(foreach f,$(_HELP_C_FILES),$${d}/$(f))) && \ - touch "[$]@" - -.PHONY: clean-help -mostlyclean-am: $(if $(HELP_ID),clean-help) -clean-help: - rm -f $(_HELP_LC_FILES) $(_HELP_LC_STAMPS) $(_HELP_MOFILES) - -EXTRA_DIST ?= -EXTRA_DIST += $(_HELP_C_EXTRA) $(_HELP_C_MEDIA) -EXTRA_DIST += $(if $(YELP_LC_DIST),$(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).stamp)) -EXTRA_DIST += $(foreach lc,$(HELP_LINGUAS),$(lc)/$(lc).po) -EXTRA_DIST += $(foreach f,$(HELP_MEDIA),$(foreach lc,$(HELP_LINGUAS),$(wildcard $(lc)/$(f)))) - -distdir: distdir-help-files -distdir-help-files: $(_HELP_LC_FILES) - @for lc in C $(if $(YELP_LC_DIST),$(HELP_LINGUAS)) ; do \ - $(MKDIR_P) "$(distdir)/$$lc"; \ - for file in $(HELP_FILES); do \ - if test -f "$$lc/$$file"; then d=./; else d=$(srcdir)/; fi; \ - cp -p "$$d$$lc/$$file" "$(distdir)/$$lc/" || exit 1; \ - done; \ - done; \ - -.PHONY: check-help -check: check-help -check-help: - for lc in C $(_HELP_LINGUAS); do \ - if test -d "$$lc"; \ - then d=; \ - xmlpath="$$lc"; \ - else \ - d="$(srcdir)/"; \ - xmlpath="$$lc:$(srcdir)/$$lc"; \ - fi; \ - for page in $(HELP_FILES); do \ - echo "$(XMLLINT) --noout --noent --path $$xmlpath --xinclude $$d$$lc/$$page"; \ - $(XMLLINT) --noout --noent --path "$$xmlpath" --xinclude "$$d$$lc/$$page"; \ - done; \ - done - - -.PHONY: install-help -install-data-am: $(if $(HELP_ID),install-help) -install-help: $(_HELP_LC_FILES) - @for lc in C $(_HELP_LINGUAS); do \ - $(mkinstalldirs) "$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)" || exit 1; \ - done - @for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \ - if test -f "$$lc/$$f"; then d=; else d="$(srcdir)/"; fi; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \ - echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir`basename $$f`"; \ - $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir`basename $$f`" || exit 1; \ - done; done - @for f in $(_HELP_C_EXTRA); do \ - lc=`dirname "$$f"`; lc=`basename "$$lc"`; \ - if test -f "$$f"; then d=; else d="$(srcdir)/"; fi; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \ - echo "$(INSTALL_DATA) $$d$$f $$helpdir`basename $$f`"; \ - $(INSTALL_DATA) "$$d$$f" "$$helpdir`basename $$f`" || exit 1; \ - done - @for f in $(HELP_MEDIA); do \ - for lc in C $(_HELP_LINGUAS); do \ - if test -f "$$lc$$f"; then d=; else d="$(srcdir)/"; fi; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - mdir=`dirname "$$f"`; \ - if test "x$mdir" = "x."; then mdir=""; fi; \ - if ! test -d "$$helpdir$$mdir"; then $(mkinstalldirs) "$$helpdir$$mdir"; fi; \ - if test -f "$$d$$lc/$$f"; then \ - echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir$$f"; \ - $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir$$f" || exit 1; \ - elif test "x$$lc" != "xC"; then \ - if test "x$(YELP_LC_MEDIA_LINKS)" != "x"; then \ - echo "$(LN_S) -f $(HELP_DIR)/C/$(HELP_ID)/$$f $$helpdir$$f"; \ - $(LN_S) -f "$(HELP_DIR)/C/$(HELP_ID)/$$f" "$$helpdir$$f" || exit 1; \ - fi; \ - fi; \ - done; \ - done - -.PHONY: uninstall-help -uninstall-am: $(if $(HELP_ID),uninstall-help) -uninstall-help: - for lc in C $(_HELP_LINGUAS); do for f in $(HELP_FILES); do \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - echo "rm -f $$helpdir`basename $$f`"; \ - rm -f "$$helpdir`basename $$f`"; \ - done; done - @for f in $(_HELP_C_EXTRA); do \ - lc=`dirname "$$f"`; lc=`basename "$$lc"`; \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - echo "rm -f $$helpdir`basename $$f`"; \ - rm -f "$$helpdir`basename $$f`"; \ - done - @for f in $(HELP_MEDIA); do \ - for lc in C $(_HELP_LINGUAS); do \ - helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \ - echo "rm -f $$helpdir$$f"; \ - rm -f "$$helpdir$$f"; \ - done; \ - done; -' -AC_SUBST([YELP_HELP_RULES]) -m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([YELP_HELP_RULES])]) -]) diff -Nru hitori-3.22.4/Makefile.am hitori-3.31.0/Makefile.am --- hitori-3.22.4/Makefile.am 2017-03-22 14:34:03.000000000 +0000 +++ hitori-3.31.0/Makefile.am 1970-01-01 00:00:00.000000000 +0000 @@ -1,188 +0,0 @@ -SUBDIRS = help po - -ACLOCAL_AMFLAGS = --install -I m4 ${ACLOCAL_FLAGS} - -# Executable -bin_PROGRAMS = src/hitori - -src_hitori_SOURCES = \ - src/main.c \ - src/interface.c \ - src/main.h \ - src/interface.h \ - src/generator.c \ - src/generator.h \ - src/rules.c \ - src/rules.h \ - $(NULL) -nodist_src_hitori_SOURCES = \ - src/hitori-resources.c \ - $(NULL) - -src_hitori_CPPFLAGS = \ - -DPACKAGE_LOCALE_DIR=\""$(datadir)/locale"\" \ - $(DISABLE_DEPRECATED) \ - $(NULL) - -src_hitori_LDADD = $(GENERAL_LIBS) -src_hitori_CFLAGS = \ - $(GENERAL_CFLAGS) \ - $(CODE_COVERAGE_CFLAGS) \ - $(WARN_CFLAGS) \ - $(NULL) -src_hitori_LDFLAGS = \ - $(WARN_LDFLAGS) \ - $(CODE_COVERAGE_LDFLAGS) \ - $(NULL) - -# Code coverage -@CODE_COVERAGE_RULES@ - -# Icons -icon_dir = $(datadir)/icons/hicolor -gtk_update_icon_cache = gtk-update-icon-cache -f -t $(icon_dir) - -install-data-hook: update-icon-cache -uninstall-hook: update-icon-cache -update-icon-cache: - @-if test -z "$(DESTDIR)"; then \ - echo "Updating GTK+ icon cache."; \ - $(gtk_update_icon_cache); \ - else \ - echo "*** Icon cache not updated. After (un)install, run this:"; \ - echo "*** $(gtk_update_icon_cache)"; \ - fi - -icon16dir = $(icon_dir)/16x16/apps -icon16_DATA = data/icons/16x16/org.gnome.Hitori.png -icon22dir = $(icon_dir)/22x22/apps -icon22_DATA = data/icons/22x22/org.gnome.Hitori.png -icon32dir = $(icon_dir)/32x32/apps -icon32_DATA = data/icons/32x32/org.gnome.Hitori.png -icon48dir = $(icon_dir)/48x48/apps -icon48_DATA = data/icons/48x48/org.gnome.Hitori.png -iconsymbolicdir = $(icon_dir)/symbolic/apps -iconsymbolic_DATA = data/icons/symbolic/org.gnome.Hitori-symbolic.svg - -EXTRA_DIST = \ - data/icons/16x16/org.gnome.Hitori.svg \ - $(icon16_DATA) \ - data/icons/22x22/org.gnome.Hitori.svg \ - $(icon22_DATA) \ - data/icons/32x32/org.gnome.Hitori.svg \ - $(icon32_DATA) \ - data/icons/48x48/org.gnome.Hitori.svg \ - $(icon48_DATA) \ - $(iconsymbolic_DATA) \ - $(NULL) - -# GResources -src/hitori-resources.c: $(shell $(GLIB_COMPILE_RESOURCES) --generate-dependencies --sourcedir=$(top_srcdir) $(top_srcdir)/src/hitori.gresource.xml) - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=$(top_srcdir) --generate-source $(top_srcdir)/src/hitori.gresource.xml - -CLEANFILES = src/hitori-resources.c -EXTRA_DIST += src/hitori.gresource.xml - -# UI & CSS files -ui_data = \ - data/hitori-menus.ui \ - data/hitori.ui \ - $(NULL) -dist_noinst_DATA = \ - $(ui_data) \ - data/hitori.css - -check-builder: $(ui_data) - [ "$(XMLLINT)" = "" ] || \ - $(XMLLINT) --nonet --noblanks --noout --relaxng $(GTK_PREFIX)/share/gtk-3.0/gtkbuilder.rng $^ -check-local: check-builder - -# GSettings -gsettings_SCHEMAS = data/org.gnome.hitori.gschema.xml -@GSETTINGS_RULES@ - -# Desktop file -%.desktop: %.desktop.in - @$(MKDIR_P) $(dir $@) - $(AM_V_GEN) $(MSGFMT) --desktop --template $< -o $@-t \ - -d $(top_srcdir)/po && mv $@-t $@ - -desktop_in_files = data/org.gnome.Hitori.desktop.in -desktopdir = $(datadir)/applications -desktop_DATA = $(desktop_in_files:.desktop.in=.desktop) - -EXTRA_DIST += \ - $(gsettings_SCHEMAS) \ - $(desktop_in_files) \ - $(NULL) -CLEANFILES += $(desktop_DATA) - -check-desktop: $(desktop_DATA) - [ "$(DESKTOP_FILE_VALIDATE)" = "" ] || \ - $(DESKTOP_FILE_VALIDATE) $^ -check-local: check-desktop - -# AppData -@APPSTREAM_XML_RULES@ - -appstream_in_files = data/org.gnome.Hitori.appdata.xml.in -appstream_XML = $(appstream_in_files:.appdata.xml.in=.appdata.xml) - -EXTRA_DIST += $(appstream_in_files) -CLEANFILES += $(appstream_XML) - -%.appdata.xml: %.appdata.xml.in - @$(MKDIR_P) $(dir $@) - $(AM_V_GEN) $(MSGFMT) --xml --template $< -o $@-t \ - -d $(top_srcdir)/po && mv $@-t $@ - -# Gubbins -EXTRA_DIST += \ - autogen.sh \ - README \ - COPYING \ - COPYING-DOCS \ - AUTHORS \ - INSTALL \ - NEWS \ - ChangeLog.pre-0-2-2 \ - po/ChangeLog.pre-0-2-2 \ - MAINTAINERS \ - hitori.doap \ - $(NULL) - -MAINTAINERCLEANFILES = \ - $(GITIGNORE_MAINTAINERCLEANFILES_TOPLEVEL) \ - $(GITIGNORE_MAINTAINERCLEANFILES_MAKEFILE_IN) \ - ABOUT-NLS \ - INSTALL \ - compile \ - config.h.in \ - config.rpath \ - `find "m4" -type f -name "*.m4" -print` \ - po/Makevars.template \ - po/Rules-quot \ - po/boldquot.sed \ - po/en@boldquot.header \ - po/en@quot.header \ - po/insert-header.sin \ - po/quot.sed \ - po/remove-potcdate.sin \ - $(NULL) - -AM_DISTCHECK_CONFIGURE_FLAGS = --disable-scrollkeeper --enable-appstream-util - -# Copy all the spec files. Of course, only one is actually used. -dist-hook: - for specfile in *.spec; do \ - if test -f $$specfile; then \ - cp -p $$specfile $(distdir); \ - fi \ - done - -# ChangeLog generation -CHANGELOG_START = V_0_2_2^ -@GENERATE_CHANGELOG_RULES@ -dist-hook: dist-ChangeLog - --include $(top_srcdir)/git.mk diff -Nru hitori-3.22.4/Makefile.in hitori-3.31.0/Makefile.in --- hitori-3.22.4/Makefile.in 2017-10-02 08:08:04.000000000 +0000 +++ hitori-3.31.0/Makefile.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,1449 +0,0 @@ -# Makefile.in generated by automake 1.15 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2014 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - - -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -bin_PROGRAMS = src/hitori$(EXEEXT) -subdir = . -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/appstream-xml.m4 \ - $(top_srcdir)/m4/ax_append_compile_flags.m4 \ - $(top_srcdir)/m4/ax_append_flag.m4 \ - $(top_srcdir)/m4/ax_append_link_flags.m4 \ - $(top_srcdir)/m4/ax_check_compile_flag.m4 \ - $(top_srcdir)/m4/ax_check_enable_debug.m4 \ - $(top_srcdir)/m4/ax_check_link_flag.m4 \ - $(top_srcdir)/m4/ax_code_coverage.m4 \ - $(top_srcdir)/m4/ax_compiler_flags.m4 \ - $(top_srcdir)/m4/ax_compiler_flags_cflags.m4 \ - $(top_srcdir)/m4/ax_compiler_flags_gir.m4 \ - $(top_srcdir)/m4/ax_compiler_flags_ldflags.m4 \ - $(top_srcdir)/m4/ax_generate_changelog.m4 \ - $(top_srcdir)/m4/ax_is_release.m4 \ - $(top_srcdir)/m4/ax_require_defined.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gsettings.m4 \ - $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ - $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ - $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/pkg.m4 \ - $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/m4/yelp.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ - $(am__configure_deps) $(dist_noinst_DATA) $(am__DIST_COMMON) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(desktopdir)" \ - "$(DESTDIR)$(icon16dir)" "$(DESTDIR)$(icon22dir)" \ - "$(DESTDIR)$(icon32dir)" "$(DESTDIR)$(icon48dir)" \ - "$(DESTDIR)$(iconsymbolicdir)" -PROGRAMS = $(bin_PROGRAMS) -am__dirstamp = $(am__leading_dot)dirstamp -am_src_hitori_OBJECTS = src/src_hitori-main.$(OBJEXT) \ - src/src_hitori-interface.$(OBJEXT) \ - src/src_hitori-generator.$(OBJEXT) \ - src/src_hitori-rules.$(OBJEXT) -nodist_src_hitori_OBJECTS = src/src_hitori-hitori-resources.$(OBJEXT) -src_hitori_OBJECTS = $(am_src_hitori_OBJECTS) \ - $(nodist_src_hitori_OBJECTS) -am__DEPENDENCIES_1 = -src_hitori_DEPENDENCIES = $(am__DEPENDENCIES_1) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -src_hitori_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(src_hitori_CFLAGS) \ - $(CFLAGS) $(src_hitori_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(src_hitori_SOURCES) $(nodist_src_hitori_SOURCES) -DIST_SOURCES = $(src_hitori_SOURCES) -RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ - ctags-recursive dvi-recursive html-recursive info-recursive \ - install-data-recursive install-dvi-recursive \ - install-exec-recursive install-html-recursive \ - install-info-recursive install-pdf-recursive \ - install-ps-recursive install-recursive installcheck-recursive \ - installdirs-recursive pdf-recursive ps-recursive \ - tags-recursive uninstall-recursive -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -DATA = $(desktop_DATA) $(dist_noinst_DATA) $(icon16_DATA) \ - $(icon22_DATA) $(icon32_DATA) $(icon48_DATA) \ - $(iconsymbolic_DATA) -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -am__recursive_targets = \ - $(RECURSIVE_TARGETS) \ - $(RECURSIVE_CLEAN_TARGETS) \ - $(am__extra_recursive_targets) -AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ - cscope distdir dist dist-all distcheck -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ - $(LISP)config.h.in -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -CSCOPE = cscope -DIST_SUBDIRS = $(SUBDIRS) -am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README \ - compile config.guess config.rpath config.sub depcomp \ - install-sh ltmain.sh missing -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ - || { sleep 5 && rm -rf "$(distdir)"; }; \ - else :; fi -am__post_remove_distdir = $(am__remove_distdir) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -GZIP_ENV = --best -DIST_ARCHIVES = $(distdir).tar.xz -DIST_TARGETS = dist-xz -distuninstallcheck_listfiles = find . -type f -print -am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ - | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -APPSTREAM_UTIL = @APPSTREAM_UTIL@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ -CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ -CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ -CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ -CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ -CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DESKTOP_FILE_VALIDATE = @DESKTOP_FILE_VALIDATE@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GCOV = @GCOV@ -GENERAL_CFLAGS = @GENERAL_CFLAGS@ -GENERAL_LIBS = @GENERAL_LIBS@ -GENHTML = @GENHTML@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GIT = @GIT@ -GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ -GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@ -GTK_PREFIX = @GTK_PREFIX@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -ITSTOOL = @ITSTOOL@ -LCOV = @LCOV@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARN_CFLAGS = @WARN_CFLAGS@ -WARN_LDFLAGS = @WARN_LDFLAGS@ -WARN_SCANNERFLAGS = @WARN_SCANNERFLAGS@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -XMLLINT = @XMLLINT@ -YELP_LC_DIST = @YELP_LC_DIST@ -YELP_LC_MEDIA_LINKS = @YELP_LC_MEDIA_LINKS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -appstreamxmldir = @appstreamxmldir@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -gsettingsschemadir = @gsettingsschemadir@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = help po -ACLOCAL_AMFLAGS = --install -I m4 ${ACLOCAL_FLAGS} -src_hitori_SOURCES = \ - src/main.c \ - src/interface.c \ - src/main.h \ - src/interface.h \ - src/generator.c \ - src/generator.h \ - src/rules.c \ - src/rules.h \ - $(NULL) - -nodist_src_hitori_SOURCES = \ - src/hitori-resources.c \ - $(NULL) - -src_hitori_CPPFLAGS = \ - -DPACKAGE_LOCALE_DIR=\""$(datadir)/locale"\" \ - $(DISABLE_DEPRECATED) \ - $(NULL) - -src_hitori_LDADD = $(GENERAL_LIBS) -src_hitori_CFLAGS = \ - $(GENERAL_CFLAGS) \ - $(CODE_COVERAGE_CFLAGS) \ - $(WARN_CFLAGS) \ - $(NULL) - -src_hitori_LDFLAGS = \ - $(WARN_LDFLAGS) \ - $(CODE_COVERAGE_LDFLAGS) \ - $(NULL) - - -# Icons -icon_dir = $(datadir)/icons/hicolor -gtk_update_icon_cache = gtk-update-icon-cache -f -t $(icon_dir) -icon16dir = $(icon_dir)/16x16/apps -icon16_DATA = data/icons/16x16/org.gnome.Hitori.png -icon22dir = $(icon_dir)/22x22/apps -icon22_DATA = data/icons/22x22/org.gnome.Hitori.png -icon32dir = $(icon_dir)/32x32/apps -icon32_DATA = data/icons/32x32/org.gnome.Hitori.png -icon48dir = $(icon_dir)/48x48/apps -icon48_DATA = data/icons/48x48/org.gnome.Hitori.png -iconsymbolicdir = $(icon_dir)/symbolic/apps -iconsymbolic_DATA = data/icons/symbolic/org.gnome.Hitori-symbolic.svg - -# Gubbins -EXTRA_DIST = data/icons/16x16/org.gnome.Hitori.svg $(icon16_DATA) \ - data/icons/22x22/org.gnome.Hitori.svg $(icon22_DATA) \ - data/icons/32x32/org.gnome.Hitori.svg $(icon32_DATA) \ - data/icons/48x48/org.gnome.Hitori.svg $(icon48_DATA) \ - $(iconsymbolic_DATA) $(NULL) src/hitori.gresource.xml \ - $(gsettings_SCHEMAS) $(desktop_in_files) $(NULL) \ - $(appstream_in_files) autogen.sh README COPYING COPYING-DOCS \ - AUTHORS INSTALL NEWS ChangeLog.pre-0-2-2 \ - po/ChangeLog.pre-0-2-2 MAINTAINERS hitori.doap $(NULL) -CLEANFILES = src/hitori-resources.c $(desktop_DATA) $(appstream_XML) - -# UI & CSS files -ui_data = \ - data/hitori-menus.ui \ - data/hitori.ui \ - $(NULL) - -dist_noinst_DATA = \ - $(ui_data) \ - data/hitori.css - - -# GSettings -gsettings_SCHEMAS = data/org.gnome.hitori.gschema.xml -desktop_in_files = data/org.gnome.Hitori.desktop.in -desktopdir = $(datadir)/applications -desktop_DATA = $(desktop_in_files:.desktop.in=.desktop) -appstream_in_files = data/org.gnome.Hitori.appdata.xml.in -appstream_XML = $(appstream_in_files:.appdata.xml.in=.appdata.xml) -MAINTAINERCLEANFILES = \ - $(GITIGNORE_MAINTAINERCLEANFILES_TOPLEVEL) \ - $(GITIGNORE_MAINTAINERCLEANFILES_MAKEFILE_IN) \ - ABOUT-NLS \ - INSTALL \ - compile \ - config.h.in \ - config.rpath \ - `find "m4" -type f -name "*.m4" -print` \ - po/Makevars.template \ - po/Rules-quot \ - po/boldquot.sed \ - po/en@boldquot.header \ - po/en@quot.header \ - po/insert-header.sin \ - po/quot.sed \ - po/remove-potcdate.sin \ - $(NULL) - -AM_DISTCHECK_CONFIGURE_FLAGS = --disable-scrollkeeper --enable-appstream-util - -# ChangeLog generation -CHANGELOG_START = V_0_2_2^ -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -am--refresh: Makefile - @: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -config.h: stamp-h1 - @test -f $@ || rm -f stamp-h1 - @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ - fi; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p \ - || test -f $$p1 \ - ; then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' \ - -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' \ - `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list -src/$(am__dirstamp): - @$(MKDIR_P) src - @: > src/$(am__dirstamp) -src/$(DEPDIR)/$(am__dirstamp): - @$(MKDIR_P) src/$(DEPDIR) - @: > src/$(DEPDIR)/$(am__dirstamp) -src/src_hitori-main.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_hitori-interface.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_hitori-generator.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_hitori-rules.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) -src/src_hitori-hitori-resources.$(OBJEXT): src/$(am__dirstamp) \ - src/$(DEPDIR)/$(am__dirstamp) - -src/hitori$(EXEEXT): $(src_hitori_OBJECTS) $(src_hitori_DEPENDENCIES) $(EXTRA_src_hitori_DEPENDENCIES) src/$(am__dirstamp) - @rm -f src/hitori$(EXEEXT) - $(AM_V_CCLD)$(src_hitori_LINK) $(src_hitori_OBJECTS) $(src_hitori_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -rm -f src/*.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_hitori-generator.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_hitori-hitori-resources.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_hitori-interface.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_hitori-main.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/src_hitori-rules.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ -@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -src/src_hitori-main.o: src/main.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -MT src/src_hitori-main.o -MD -MP -MF src/$(DEPDIR)/src_hitori-main.Tpo -c -o src/src_hitori-main.o `test -f 'src/main.c' || echo '$(srcdir)/'`src/main.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_hitori-main.Tpo src/$(DEPDIR)/src_hitori-main.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/main.c' object='src/src_hitori-main.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -c -o src/src_hitori-main.o `test -f 'src/main.c' || echo '$(srcdir)/'`src/main.c - -src/src_hitori-main.obj: src/main.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -MT src/src_hitori-main.obj -MD -MP -MF src/$(DEPDIR)/src_hitori-main.Tpo -c -o src/src_hitori-main.obj `if test -f 'src/main.c'; then $(CYGPATH_W) 'src/main.c'; else $(CYGPATH_W) '$(srcdir)/src/main.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_hitori-main.Tpo src/$(DEPDIR)/src_hitori-main.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/main.c' object='src/src_hitori-main.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -c -o src/src_hitori-main.obj `if test -f 'src/main.c'; then $(CYGPATH_W) 'src/main.c'; else $(CYGPATH_W) '$(srcdir)/src/main.c'; fi` - -src/src_hitori-interface.o: src/interface.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -MT src/src_hitori-interface.o -MD -MP -MF src/$(DEPDIR)/src_hitori-interface.Tpo -c -o src/src_hitori-interface.o `test -f 'src/interface.c' || echo '$(srcdir)/'`src/interface.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_hitori-interface.Tpo src/$(DEPDIR)/src_hitori-interface.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/interface.c' object='src/src_hitori-interface.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -c -o src/src_hitori-interface.o `test -f 'src/interface.c' || echo '$(srcdir)/'`src/interface.c - -src/src_hitori-interface.obj: src/interface.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -MT src/src_hitori-interface.obj -MD -MP -MF src/$(DEPDIR)/src_hitori-interface.Tpo -c -o src/src_hitori-interface.obj `if test -f 'src/interface.c'; then $(CYGPATH_W) 'src/interface.c'; else $(CYGPATH_W) '$(srcdir)/src/interface.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_hitori-interface.Tpo src/$(DEPDIR)/src_hitori-interface.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/interface.c' object='src/src_hitori-interface.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -c -o src/src_hitori-interface.obj `if test -f 'src/interface.c'; then $(CYGPATH_W) 'src/interface.c'; else $(CYGPATH_W) '$(srcdir)/src/interface.c'; fi` - -src/src_hitori-generator.o: src/generator.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -MT src/src_hitori-generator.o -MD -MP -MF src/$(DEPDIR)/src_hitori-generator.Tpo -c -o src/src_hitori-generator.o `test -f 'src/generator.c' || echo '$(srcdir)/'`src/generator.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_hitori-generator.Tpo src/$(DEPDIR)/src_hitori-generator.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/generator.c' object='src/src_hitori-generator.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -c -o src/src_hitori-generator.o `test -f 'src/generator.c' || echo '$(srcdir)/'`src/generator.c - -src/src_hitori-generator.obj: src/generator.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -MT src/src_hitori-generator.obj -MD -MP -MF src/$(DEPDIR)/src_hitori-generator.Tpo -c -o src/src_hitori-generator.obj `if test -f 'src/generator.c'; then $(CYGPATH_W) 'src/generator.c'; else $(CYGPATH_W) '$(srcdir)/src/generator.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_hitori-generator.Tpo src/$(DEPDIR)/src_hitori-generator.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/generator.c' object='src/src_hitori-generator.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -c -o src/src_hitori-generator.obj `if test -f 'src/generator.c'; then $(CYGPATH_W) 'src/generator.c'; else $(CYGPATH_W) '$(srcdir)/src/generator.c'; fi` - -src/src_hitori-rules.o: src/rules.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -MT src/src_hitori-rules.o -MD -MP -MF src/$(DEPDIR)/src_hitori-rules.Tpo -c -o src/src_hitori-rules.o `test -f 'src/rules.c' || echo '$(srcdir)/'`src/rules.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_hitori-rules.Tpo src/$(DEPDIR)/src_hitori-rules.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/rules.c' object='src/src_hitori-rules.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -c -o src/src_hitori-rules.o `test -f 'src/rules.c' || echo '$(srcdir)/'`src/rules.c - -src/src_hitori-rules.obj: src/rules.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -MT src/src_hitori-rules.obj -MD -MP -MF src/$(DEPDIR)/src_hitori-rules.Tpo -c -o src/src_hitori-rules.obj `if test -f 'src/rules.c'; then $(CYGPATH_W) 'src/rules.c'; else $(CYGPATH_W) '$(srcdir)/src/rules.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_hitori-rules.Tpo src/$(DEPDIR)/src_hitori-rules.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/rules.c' object='src/src_hitori-rules.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -c -o src/src_hitori-rules.obj `if test -f 'src/rules.c'; then $(CYGPATH_W) 'src/rules.c'; else $(CYGPATH_W) '$(srcdir)/src/rules.c'; fi` - -src/src_hitori-hitori-resources.o: src/hitori-resources.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -MT src/src_hitori-hitori-resources.o -MD -MP -MF src/$(DEPDIR)/src_hitori-hitori-resources.Tpo -c -o src/src_hitori-hitori-resources.o `test -f 'src/hitori-resources.c' || echo '$(srcdir)/'`src/hitori-resources.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_hitori-hitori-resources.Tpo src/$(DEPDIR)/src_hitori-hitori-resources.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/hitori-resources.c' object='src/src_hitori-hitori-resources.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -c -o src/src_hitori-hitori-resources.o `test -f 'src/hitori-resources.c' || echo '$(srcdir)/'`src/hitori-resources.c - -src/src_hitori-hitori-resources.obj: src/hitori-resources.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -MT src/src_hitori-hitori-resources.obj -MD -MP -MF src/$(DEPDIR)/src_hitori-hitori-resources.Tpo -c -o src/src_hitori-hitori-resources.obj `if test -f 'src/hitori-resources.c'; then $(CYGPATH_W) 'src/hitori-resources.c'; else $(CYGPATH_W) '$(srcdir)/src/hitori-resources.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/src_hitori-hitori-resources.Tpo src/$(DEPDIR)/src_hitori-hitori-resources.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='src/hitori-resources.c' object='src/src_hitori-hitori-resources.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(src_hitori_CPPFLAGS) $(CPPFLAGS) $(src_hitori_CFLAGS) $(CFLAGS) -c -o src/src_hitori-hitori-resources.obj `if test -f 'src/hitori-resources.c'; then $(CYGPATH_W) 'src/hitori-resources.c'; else $(CYGPATH_W) '$(srcdir)/src/hitori-resources.c'; fi` - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -rm -rf src/.libs src/_libs - -distclean-libtool: - -rm -f libtool config.lt -install-desktopDATA: $(desktop_DATA) - @$(NORMAL_INSTALL) - @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(desktopdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(desktopdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \ - done - -uninstall-desktopDATA: - @$(NORMAL_UNINSTALL) - @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(desktopdir)'; $(am__uninstall_files_from_dir) -install-icon16DATA: $(icon16_DATA) - @$(NORMAL_INSTALL) - @list='$(icon16_DATA)'; test -n "$(icon16dir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(icon16dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(icon16dir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(icon16dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(icon16dir)" || exit $$?; \ - done - -uninstall-icon16DATA: - @$(NORMAL_UNINSTALL) - @list='$(icon16_DATA)'; test -n "$(icon16dir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(icon16dir)'; $(am__uninstall_files_from_dir) -install-icon22DATA: $(icon22_DATA) - @$(NORMAL_INSTALL) - @list='$(icon22_DATA)'; test -n "$(icon22dir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(icon22dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(icon22dir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(icon22dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(icon22dir)" || exit $$?; \ - done - -uninstall-icon22DATA: - @$(NORMAL_UNINSTALL) - @list='$(icon22_DATA)'; test -n "$(icon22dir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(icon22dir)'; $(am__uninstall_files_from_dir) -install-icon32DATA: $(icon32_DATA) - @$(NORMAL_INSTALL) - @list='$(icon32_DATA)'; test -n "$(icon32dir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(icon32dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(icon32dir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(icon32dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(icon32dir)" || exit $$?; \ - done - -uninstall-icon32DATA: - @$(NORMAL_UNINSTALL) - @list='$(icon32_DATA)'; test -n "$(icon32dir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(icon32dir)'; $(am__uninstall_files_from_dir) -install-icon48DATA: $(icon48_DATA) - @$(NORMAL_INSTALL) - @list='$(icon48_DATA)'; test -n "$(icon48dir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(icon48dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(icon48dir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(icon48dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(icon48dir)" || exit $$?; \ - done - -uninstall-icon48DATA: - @$(NORMAL_UNINSTALL) - @list='$(icon48_DATA)'; test -n "$(icon48dir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(icon48dir)'; $(am__uninstall_files_from_dir) -install-iconsymbolicDATA: $(iconsymbolic_DATA) - @$(NORMAL_INSTALL) - @list='$(iconsymbolic_DATA)'; test -n "$(iconsymbolicdir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(iconsymbolicdir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(iconsymbolicdir)" || exit 1; \ - fi; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsymbolicdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsymbolicdir)" || exit $$?; \ - done - -uninstall-iconsymbolicDATA: - @$(NORMAL_UNINSTALL) - @list='$(iconsymbolic_DATA)'; test -n "$(iconsymbolicdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - dir='$(DESTDIR)$(iconsymbolicdir)'; $(am__uninstall_files_from_dir) - -# This directory's subdirectories are mostly independent; you can cd -# into them and run 'make' without going through this Makefile. -# To change the values of 'make' variables: instead of editing Makefiles, -# (1) if the variable is set in 'config.status', edit 'config.status' -# (which will cause the Makefiles to be regenerated when you run 'make'); -# (2) otherwise, pass the desired values on the 'make' command line. -$(am__recursive_targets): - @fail=; \ - if $(am__make_keepgoing); then \ - failcom='fail=yes'; \ - else \ - failcom='exit 1'; \ - fi; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-recursive -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-recursive - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscope: cscope.files - test ! -s cscope.files \ - || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) -clean-cscope: - -rm -f cscope.files -cscope.files: clean-cscope cscopelist -cscopelist: cscopelist-recursive - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -rm -f cscope.out cscope.in.out cscope.po.out cscope.files - -distdir: $(DISTFILES) - @case `sed 15q $(srcdir)/NEWS` in \ - *"$(VERSION)"*) : ;; \ - *) \ - echo "NEWS not updated; not releasing" 1>&2; \ - exit 1;; \ - esac - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - $(am__make_dryrun) \ - || test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" distdir="$(distdir)" \ - dist-hook - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz - $(am__post_remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 - $(am__post_remove_distdir) - -dist-lzip: distdir - tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz - $(am__post_remove_distdir) -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz - $(am__post_remove_distdir) - -dist-tarZ: distdir - @echo WARNING: "Support for distribution archives compressed with" \ - "legacy program 'compress' is deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__post_remove_distdir) - -dist-shar: distdir - @echo WARNING: "Support for shar distribution archives is" \ - "deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz - $(am__post_remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__post_remove_distdir) - -dist dist-all: - $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' - $(am__post_remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lz*) \ - lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir) - chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build/sub \ - && ../../configure \ - $(AM_DISTCHECK_CONFIGURE_FLAGS) \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - --srcdir=../.. --prefix="$$dc_install_base" \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__post_remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @test -n '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: trying to run $@ with an empty' \ - '$$(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - $(am__cd) '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-recursive -all-am: Makefile $(PROGRAMS) $(DATA) config.h -installdirs: installdirs-recursive -installdirs-am: - for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(icon16dir)" "$(DESTDIR)$(icon22dir)" "$(DESTDIR)$(icon32dir)" "$(DESTDIR)$(icon48dir)" "$(DESTDIR)$(iconsymbolicdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -rm -f src/$(DEPDIR)/$(am__dirstamp) - -rm -f src/$(am__dirstamp) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-recursive - -clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf src/$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-hdr distclean-libtool distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: install-desktopDATA install-icon16DATA \ - install-icon22DATA install-icon32DATA install-icon48DATA \ - install-iconsymbolicDATA - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-data-hook -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: install-binPROGRAMS - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -rf src/$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: uninstall-binPROGRAMS uninstall-desktopDATA \ - uninstall-icon16DATA uninstall-icon22DATA uninstall-icon32DATA \ - uninstall-icon48DATA uninstall-iconsymbolicDATA - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) uninstall-hook -.MAKE: $(am__recursive_targets) all check-am install-am \ - install-data-am install-strip uninstall-am - -.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ - am--refresh check check-am check-local clean clean-binPROGRAMS \ - clean-cscope clean-generic clean-libtool cscope cscopelist-am \ - ctags ctags-am dist dist-all dist-bzip2 dist-gzip dist-hook \ - dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \ - distclean distclean-compile distclean-generic distclean-hdr \ - distclean-libtool distclean-tags distcleancheck distdir \ - distuninstallcheck dvi dvi-am html html-am info info-am \ - install install-am install-binPROGRAMS install-data \ - install-data-am install-data-hook install-desktopDATA \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-icon16DATA \ - install-icon22DATA install-icon32DATA install-icon48DATA \ - install-iconsymbolicDATA install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \ - uninstall-desktopDATA uninstall-hook uninstall-icon16DATA \ - uninstall-icon22DATA uninstall-icon32DATA uninstall-icon48DATA \ - uninstall-iconsymbolicDATA - -.PRECIOUS: Makefile - - -# Code coverage -@CODE_COVERAGE_RULES@ - -install-data-hook: update-icon-cache -uninstall-hook: update-icon-cache -update-icon-cache: - @-if test -z "$(DESTDIR)"; then \ - echo "Updating GTK+ icon cache."; \ - $(gtk_update_icon_cache); \ - else \ - echo "*** Icon cache not updated. After (un)install, run this:"; \ - echo "*** $(gtk_update_icon_cache)"; \ - fi - -# GResources -src/hitori-resources.c: $(shell $(GLIB_COMPILE_RESOURCES) --generate-dependencies --sourcedir=$(top_srcdir) $(top_srcdir)/src/hitori.gresource.xml) - $(AM_V_GEN) $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=$(top_srcdir) --generate-source $(top_srcdir)/src/hitori.gresource.xml - -check-builder: $(ui_data) - [ "$(XMLLINT)" = "" ] || \ - $(XMLLINT) --nonet --noblanks --noout --relaxng $(GTK_PREFIX)/share/gtk-3.0/gtkbuilder.rng $^ -check-local: check-builder -@GSETTINGS_RULES@ - -# Desktop file -%.desktop: %.desktop.in - @$(MKDIR_P) $(dir $@) - $(AM_V_GEN) $(MSGFMT) --desktop --template $< -o $@-t \ - -d $(top_srcdir)/po && mv $@-t $@ - -check-desktop: $(desktop_DATA) - [ "$(DESKTOP_FILE_VALIDATE)" = "" ] || \ - $(DESKTOP_FILE_VALIDATE) $^ -check-local: check-desktop - -# AppData -@APPSTREAM_XML_RULES@ - -%.appdata.xml: %.appdata.xml.in - @$(MKDIR_P) $(dir $@) - $(AM_V_GEN) $(MSGFMT) --xml --template $< -o $@-t \ - -d $(top_srcdir)/po && mv $@-t $@ - -# Copy all the spec files. Of course, only one is actually used. -dist-hook: - for specfile in *.spec; do \ - if test -f $$specfile; then \ - cp -p $$specfile $(distdir); \ - fi \ - done -@GENERATE_CHANGELOG_RULES@ -dist-hook: dist-ChangeLog - --include $(top_srcdir)/git.mk - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru hitori-3.22.4/meson.build hitori-3.31.0/meson.build --- hitori-3.22.4/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/meson.build 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1,98 @@ +project('hitori', 'c', + version: '3.31.0', + meson_version : '>= 0.48.0', + license: 'GPLv3+', + default_options : [ + 'buildtype=debugoptimized', + 'warning_level=2', + 'c_std=gnu11', + ], +) + +i18n = import('i18n') +gnome = import('gnome') +application_id = 'org.gnome.Hitori' + +# Dependencies +glib_dependency = dependency('glib-2.0') +gio_dependency = dependency('gio-2.0', version: '>= 2.32') +gtk_dependency = dependency('gtk+-3.0', version: '>= 3.15.0') +gmodule_dependency = dependency('gmodule-2.0') +cairo_dependency = dependency('cairo', version: '>= 1.4') + +config_h = configuration_data() +config_h.set_quoted('PACKAGE', meson.project_name()) +config_h.set_quoted('PACKAGE_URL', 'https://wiki.gnome.org/Apps/Hitori') +config_h.set_quoted('GETTEXT_PACKAGE', meson.project_name()) +config_h.set_quoted('PACKAGE_LOCALE_DIR', join_paths(get_option('prefix'), get_option('localedir'))) +config_h.set_quoted('VERSION', meson.project_version()) + +# Enable warning flags +test_c_args = [ + '-fno-strict-aliasing', + '-fstack-protector-strong', + '-Waggregate-return', + '-Wall', + '-Wunused', + '-Warray-bounds', + '-Wcast-align', + '-Wclobbered', + '-Wno-declaration-after-statement', + '-Wduplicated-branches', + '-Wduplicated-cond', + '-Wempty-body', + '-Wformat=2', + '-Wformat-nonliteral', + '-Wformat-security', + '-Wformat-signedness', + '-Wignored-qualifiers', + '-Wimplicit-function-declaration', + '-Wincompatible-pointer-types', + '-Wincompatible-pointer-types-discards-qualifiers', + '-Winit-self', + '-Wint-conversion', + '-Wlogical-op', + '-Wmisleading-indentation', + '-Wmissing-declarations', + '-Wmissing-format-attribute', + '-Wmissing-include-dirs', + '-Wmissing-noreturn', + '-Wmissing-parameter-type', + '-Wmissing-prototypes', + '-Wnested-externs', + '-Wno-error=cpp', + '-Wno-discarded-qualifiers', + '-Wno-missing-field-initializers', + '-Wno-suggest-attribute=format', + '-Wno-unused-parameter', + '-Wnull-dereference', + '-Wold-style-definition', + '-Woverflow', + '-Woverride-init', + '-Wparentheses', + '-Wpointer-arith', + '-Wredundant-decls', + '-Wreturn-type', + '-Wshadow', + '-Wsign-compare', + '-Wstrict-aliasing=2', + '-Wstrict-prototypes', + '-Wswitch-default', + '-Wswitch-enum', + '-Wtype-limits', + '-Wundef', + '-Wuninitialized', + '-Wunused-but-set-variable', + '-Wunused-result', + '-Wunused-variable', + '-Wwrite-strings' +] +cc = meson.get_compiler('c') +add_project_arguments(cc.get_supported_arguments(test_c_args), language: 'c') + +subdir('data') +subdir('help') +subdir('po') +subdir('src') + +meson.add_install_script('build-aux/meson_post_install.py') diff -Nru hitori-3.22.4/missing hitori-3.31.0/missing --- hitori-3.22.4/missing 2017-10-02 08:08:04.000000000 +0000 +++ hitori-3.31.0/missing 1970-01-01 00:00:00.000000000 +0000 @@ -1,215 +0,0 @@ -#! /bin/sh -# Common wrapper for a few potentially missing GNU programs. - -scriptversion=2013-10-28.13; # UTC - -# Copyright (C) 1996-2014 Free Software Foundation, Inc. -# Originally written by Fran,cois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try '$0 --help' for more information" - exit 1 -fi - -case $1 in - - --is-lightweight) - # Used by our autoconf macros to check whether the available missing - # script is modern enough. - exit 0 - ;; - - --run) - # Back-compat with the calling convention used by older automake. - shift - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due -to PROGRAM being missing or too old. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - -Supported PROGRAM values: - aclocal autoconf autoheader autom4te automake makeinfo - bison yacc flex lex help2man - -Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and -'g' are ignored when checking the name. - -Send bug reports to ." - exit $? - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit $? - ;; - - -*) - echo 1>&2 "$0: unknown '$1' option" - echo 1>&2 "Try '$0 --help' for more information" - exit 1 - ;; - -esac - -# Run the given program, remember its exit status. -"$@"; st=$? - -# If it succeeded, we are done. -test $st -eq 0 && exit 0 - -# Also exit now if we it failed (or wasn't found), and '--version' was -# passed; such an option is passed most likely to detect whether the -# program is present and works. -case $2 in --version|--help) exit $st;; esac - -# Exit code 63 means version mismatch. This often happens when the user -# tries to use an ancient version of a tool on a file that requires a -# minimum version. -if test $st -eq 63; then - msg="probably too old" -elif test $st -eq 127; then - # Program was missing. - msg="missing on your system" -else - # Program was found and executed, but failed. Give up. - exit $st -fi - -perl_URL=http://www.perl.org/ -flex_URL=http://flex.sourceforge.net/ -gnu_software_URL=http://www.gnu.org/software - -program_details () -{ - case $1 in - aclocal|automake) - echo "The '$1' program is part of the GNU Automake package:" - echo "<$gnu_software_URL/automake>" - echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" - echo "<$gnu_software_URL/autoconf>" - echo "<$gnu_software_URL/m4/>" - echo "<$perl_URL>" - ;; - autoconf|autom4te|autoheader) - echo "The '$1' program is part of the GNU Autoconf package:" - echo "<$gnu_software_URL/autoconf/>" - echo "It also requires GNU m4 and Perl in order to run:" - echo "<$gnu_software_URL/m4/>" - echo "<$perl_URL>" - ;; - esac -} - -give_advice () -{ - # Normalize program name to check for. - normalized_program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - - printf '%s\n' "'$1' is $msg." - - configure_deps="'configure.ac' or m4 files included by 'configure.ac'" - case $normalized_program in - autoconf*) - echo "You should only need it if you modified 'configure.ac'," - echo "or m4 files included by it." - program_details 'autoconf' - ;; - autoheader*) - echo "You should only need it if you modified 'acconfig.h' or" - echo "$configure_deps." - program_details 'autoheader' - ;; - automake*) - echo "You should only need it if you modified 'Makefile.am' or" - echo "$configure_deps." - program_details 'automake' - ;; - aclocal*) - echo "You should only need it if you modified 'acinclude.m4' or" - echo "$configure_deps." - program_details 'aclocal' - ;; - autom4te*) - echo "You might have modified some maintainer files that require" - echo "the 'autom4te' program to be rebuilt." - program_details 'autom4te' - ;; - bison*|yacc*) - echo "You should only need it if you modified a '.y' file." - echo "You may want to install the GNU Bison package:" - echo "<$gnu_software_URL/bison/>" - ;; - lex*|flex*) - echo "You should only need it if you modified a '.l' file." - echo "You may want to install the Fast Lexical Analyzer package:" - echo "<$flex_URL>" - ;; - help2man*) - echo "You should only need it if you modified a dependency" \ - "of a man page." - echo "You may want to install the GNU Help2man package:" - echo "<$gnu_software_URL/help2man/>" - ;; - makeinfo*) - echo "You should only need it if you modified a '.texi' file, or" - echo "any other file indirectly affecting the aspect of the manual." - echo "You might want to install the Texinfo package:" - echo "<$gnu_software_URL/texinfo/>" - echo "The spurious makeinfo call might also be the consequence of" - echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" - echo "want to install GNU make:" - echo "<$gnu_software_URL/make/>" - ;; - *) - echo "You might have modified some files without having the proper" - echo "tools for further handling them. Check the 'README' file, it" - echo "often tells you about the needed prerequisites for installing" - echo "this package. You may also peek at any GNU archive site, in" - echo "case some other package contains this missing '$1' program." - ;; - esac -} - -give_advice "$1" | sed -e '1s/^/WARNING: /' \ - -e '2,$s/^/ /' >&2 - -# Propagate the correct exit status (expected to be 127 for a program -# not found, 63 for a program that failed due to version mismatch). -exit $st - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff -Nru hitori-3.22.4/NEWS hitori-3.31.0/NEWS --- hitori-3.22.4/NEWS 2017-10-02 08:07:19.000000000 +0000 +++ hitori-3.31.0/NEWS 2019-02-19 16:41:30.000000000 +0000 @@ -1,191 +1,273 @@ -Major new features in version... +Overview of changes in Hitori 3.31.0 +==================================== -3.22.4: -* Translations: -** bg (Alexander Shopov) -** ca (Jordi Mas) -** fa (Arash Mousavi) -** fr (Alain Lojewski) -** ko (Junyoul Lim) -** ml (Ani Peter) -** nl (Nathan Follens) -** pl (Piotr Drąg) -** tr (Muhammet Kara) +* Migrated to Meson. (#10) + +* Bugs fixed: + - #9 Retire app menu + - #10 Migrate to Meson + - !4 Use G_DECLARE_FINAL_TYPE() to declare type + - !8 snap: Add snap build configuration + - !10 docs: Port README to Markdown + - !11 docs: Reformat NEWS to be valid Markdown + +* Translation updates: + - Catalan + - Chinese (Taiwan) + - Croatian + - Czech + - Danish + - Finnish + - French + - Friulian + - Galician + - Greek, Modern (1453-) + - Hungarian + - Indonesian + - Polish + - Romanian + - Slovenian + - Spanish + - Swedish + - Turkish + + +Overview of changes in Hitori 3.22.4 +==================================== + +* Translations: + - bg (Alexander Shopov) + - ca (Jordi Mas) + - fa (Arash Mousavi) + - fr (Alain Lojewski) + - ko (Junyoul Lim) + - ml (Ani Peter) + - nl (Nathan Follens) + - pl (Piotr Drąg) + - tr (Muhammet Kara) + + +Overview of changes in Hitori 3.22.3 +==================================== -3.22.3: * Minor rendering improvements (bug #732776) * Add flatpak manifests for nightly builds * Drop use of deprecated GTK+ API (no dependency change) * Translations: -** be (Yuras Shumovich) -** ca (Jordi Mas) -** el (Tom Tryfonidis) -** gl (Fran Dieguez) -** lv (Rūdolfs Mazurs) -** ru (Yuri Myasoedov) -** uk (Daniel Korostil) + - be (Yuras Shumovich) + - ca (Jordi Mas) + - el (Tom Tryfonidis) + - gl (Fran Dieguez) + - lv (Rūdolfs Mazurs) + - ru (Yuri Myasoedov) + - uk (Daniel Korostil) + + +Overview of changes in Hitori 3.22.2 +==================================== -3.22.2: * Add more build-time checks (this adds an optional build-time dependency on desktop-file-validate) * Translations: -** da (Joe Hansen) -** eu (Inaki Larranaga Murgoitio) -** gl (Fran Dieguez) -** nb (Kjartan Maraas) -** sl (Matej Urbančič) -** sr (Мирослав Николић) -** zh_TW (Chao-Hsiung Liao) + - da (Joe Hansen) + - eu (Inaki Larranaga Murgoitio) + - gl (Fran Dieguez) + - nb (Kjartan Maraas) + - sl (Matej Urbančič) + - sr (Мирослав Николић) + - zh_TW (Chao-Hsiung Liao) + + +Overview of changes in Hitori 3.22.1 +==================================== -3.22.1: * Port from intltool to gettext (this drops the intltool dependency) * Add various build-time checks (this adds an optional build-time dependency on xmllint) * Translations: -** cs (Marek Černocký) -** da (scootergrisen) -** de (Mario Blättermann) -** es (Daniel Mustieles) -** fi (Jiri Grönroos) -** fr (Alexandre Franke) -** fur (Fabio Tomat) -** hu (Balázs Meskó) -** id (Kukuh Syafaat) -** it (Gianvito Cavasoli) -** lt (Aurimas Černius) -** pl (Piotr Drąg) -** pt (Tiago Santos) -** pt_BR (Rafael Fontenelle) -** sk (Dušan Kazik) -** sv (Anders Jonsson) -** zh_CN (liushuyu, Mandy Wang) + - cs (Marek Černocký) + - da (scootergrisen) + - de (Mario Blättermann) + - es (Daniel Mustieles) + - fi (Jiri Grönroos) + - fr (Alexandre Franke) + - fur (Fabio Tomat) + - hu (Balázs Meskó) + - id (Kukuh Syafaat) + - it (Gianvito Cavasoli) + - lt (Aurimas Černius) + - pl (Piotr Drąg) + - pt (Tiago Santos) + - pt_BR (Rafael Fontenelle) + - sk (Dušan Kazik) + - sv (Anders Jonsson) + - zh_CN (liushuyu, Mandy Wang) + + +Overview of changes in Hitori 3.22.0 +==================================== -3.22.0: * Various AppData fixes * Translations: -** fa (Arash Mousavi) -** fur (Fabio Tomat) -** oc (Cédric Valmary) -** pl (Piotr Drąg) -** pt (Sérgio Cardeira) -** sv (Anders Jonsson) + - fa (Arash Mousavi) + - fur (Fabio Tomat) + - oc (Cédric Valmary) + - pl (Piotr Drąg) + - pt (Sérgio Cardeira) + - sv (Anders Jonsson) + + +Overview of changes in Hitori 3.20.0 +==================================== -3.20.0: * Various AppData fixes * Fix a GTK+ warning about styling with newer GTK+ versions * Translations: -** bg (Alexander Shopov) -** de (Mario Blättermann) -** hu (Gabor Kelemen) -** lt (Aurimas Černius) -** oc (Cédric Valmary) + - bg (Alexander Shopov) + - de (Mario Blättermann) + - hu (Gabor Kelemen) + - lt (Aurimas Černius) + - oc (Cédric Valmary) + + +Overview of changes in Hitori 3.19.1 +==================================== -3.19.1: * Rename icon, desktop and appdata files to use ‘org.gnome.Hitori’ prefix * Remove dependency on gnome-common in favour of autoconf-archive (or m4-common) -3.16.1: + +Overview of changes in Hitori 3.16.1 +==================================== + * Updated symbolic icon -3.16.0: + +Overview of changes in Hitori 3.16.0 +==================================== + * Port to GResource for UI and CSS * Minor menu tweaks * Translations: -** bs (Samir Ribic) -** da (Joe Hansen) -** fi (Jiri Grönroos) -** fur (Fabio Tomat) -** gl (Fran Dieguez) -** it (Milo Casagrande) -** ko (Changwoo Ryu) -** lt (Aurimas Černius) -** lv (Rūdofls Mazurs) -** pt_BR (Enrico Nicoletto) -** sr (Мирослав Николић) -** tr (Muhammet Kara) -** uk (Daniel Korostil) - -3.14.3: -* Translations: -** cs (Marek Černocký) -** el (Efstathios Iosifidis) -** en_GB (Philip Withnall) -** eo (Daniel PUENTES, Kristjan SCHMIDT) -** es (Daniel Mustieles) -** eu (Iñaki Larrañaga Murgoitio) -** fr (Gérard Baylard, Erwan GEORGET) -** he (Yosef Or Boczko) -** hu (Balázs Úr) -** gl (Fran Dieguez) -** nb (Kjartan Maraas) -** pl (Piotr Drąg, Aviary.pl) -** ru (Ivan Komaritsyn, Yuri Myasoedov) -** sk (Dušan Kazik) -** sl (Matej Urbančič) -** sv (Anders Jonsson) -** zh_TW (Chao-Hsiung Liao) + - bs (Samir Ribic) + - da (Joe Hansen) + - fi (Jiri Grönroos) + - fur (Fabio Tomat) + - gl (Fran Dieguez) + - it (Milo Casagrande) + - ko (Changwoo Ryu) + - lt (Aurimas Černius) + - lv (Rūdofls Mazurs) + - pt_BR (Enrico Nicoletto) + - sr (Мирослав Николић) + - tr (Muhammet Kara) + - uk (Daniel Korostil) + + +Overview of changes in Hitori 3.14.3 +==================================== + +* Translations: + - cs (Marek Černocký) + - el (Efstathios Iosifidis) + - en_GB (Philip Withnall) + - eo (Daniel PUENTES, Kristjan SCHMIDT) + - es (Daniel Mustieles) + - eu (Iñaki Larrañaga Murgoitio) + - fr (Gérard Baylard, Erwan GEORGET) + - he (Yosef Or Boczko) + - hu (Balázs Úr) + - gl (Fran Dieguez) + - nb (Kjartan Maraas) + - pl (Piotr Drąg, Aviary.pl) + - ru (Ivan Komaritsyn, Yuri Myasoedov) + - sk (Dušan Kazik) + - sl (Matej Urbančič) + - sv (Anders Jonsson) + - zh_TW (Chao-Hsiung Liao) + + +Overview of changes in Hitori 3.14.2.1 +====================================== -3.14.2.1: * Revert string freeze break -3.14.2: + +Overview of changes in Hitori 3.14.2 +==================================== + * Translations: -** hu (Gabor Kelemen) -** tr (Necdet Yücel, Muhammet Kara) + - hu (Gabor Kelemen) + - tr (Necdet Yücel, Muhammet Kara) + + +Overview of changes in Hitori 3.14.1 +==================================== -3.14.1: * Translations: -** hu (Balázs Úr) -** it (Milo Casagrande) -** lv (Rūdofls Mazurs) -** nb (Kjartan Maraas) -** ne (Pawan Chitrakar) -** pl (Piotr Drąg) -** sr (Мирослав Николић) -** zh_CN (Yunqiang Su) + - hu (Balázs Úr) + - it (Milo Casagrande) + - lv (Rūdofls Mazurs) + - nb (Kjartan Maraas) + - ne (Pawan Chitrakar) + - pl (Piotr Drąg) + - sr (Мирослав Николић) + - zh_CN (Yunqiang Su) + + +Overview of changes in Hitori 3.14.0.1 +====================================== -3.14.0.1: * autoreconf with up-to-date appstream-glib; fixes install location for hitori.appdata.xml -3.14.0: + +Overview of changes in Hitori 3.14.0 +==================================== + * Translations: -** da (Joe Hansen) -** de (Christian Kirbach) -** hu (Gabor Kelemen) + - da (Joe Hansen) + - de (Christian Kirbach) + - hu (Gabor Kelemen) -3.13.92: + +Overview of changes in Hitori 3.13.92 +===================================== * Minor UI and translation updates * Minor build system updates * Translations: -** as (Nilamdyuti Goswami) -** ca (Gil Forcada) -** cs (Marek Černocký) -** el (Tom Tryfonidis) -** fi (Jiri Grönroos) -** fr (Gérard Baylard, Erwan GEORGET) -** gl (Fran Dieguez) -** he (Yosef Or Boczko) -** id (Andika Triwidada) -** ko (Changwoo Ryu) -** nb (Kjartan Maraas) -** pl (Piotr Drąg) -** pt_BR (Ricardo Barbosa) -** ru (Yuri Myasoedov) -** sk (Dušan Kazik) -** zh_HK (Chao-Hsiung Liao) -** zh_TW (Chao-Hsiung Liao) + - as (Nilamdyuti Goswami) + - ca (Gil Forcada) + - cs (Marek Černocký) + - el (Tom Tryfonidis) + - fi (Jiri Grönroos) + - fr (Gérard Baylard, Erwan GEORGET) + - gl (Fran Dieguez) + - he (Yosef Or Boczko) + - id (Andika Triwidada) + - ko (Changwoo Ryu) + - nb (Kjartan Maraas) + - pl (Piotr Drąg) + - pt_BR (Ricardo Barbosa) + - ru (Yuri Myasoedov) + - sk (Dušan Kazik) + - zh_HK (Chao-Hsiung Liao) + - zh_TW (Chao-Hsiung Liao) + -3.13.90: +Overview of changes in Hitori 3.13.90 +===================================== * Follow guidelines for including license info in help * Translations: -** es (Daniel Mustieles) -** lt (Aurimas Černius) -** nb (Kjartan Maraas) -** sv (Anders Jonsson) -** uk (Daniel Korostil) + - es (Daniel Mustieles) + - lt (Aurimas Černius) + - nb (Kjartan Maraas) + - sv (Anders Jonsson) + - uk (Daniel Korostil) -3.13.4: + +Overview of changes in Hitori 3.13.4 +==================================== * Modernize UI, removing menu bar and status bar * On game over, prompt the user to play again @@ -196,96 +278,114 @@ * Fix two memory leaks * Disable the game play timer after winning * Translations: -** ca (Jordi Mas) -** cs (Marek Černocký) -** el (MarMav, Tom Tryfonidis) -** en_GB (Philip Withnall) -** es (Daniel Mustieles) -** gl (Fran Diéguez) -** he (Yosef Or Boczko) -** pl (Piotr Drąg) -** pt_BR (Rafael Ferreira) -** ru (Yuri Myasoedov) - -0.4.3: -* Translations: -** cs (Marek Černocký) -** el (Dimitris Spingos, Tom Tryfonidis) -** es (Daniel Mustieles) -** gl (Fran Dieguez) -** id (Andika Triwidada) -** pl (Piotr Drąg) -** pt_BR (Rafael Ferreira, Enrico Nicoletto) -** sl (Matej Urbančič) -** sr (Мирослав Николић) + - ca (Jordi Mas) + - cs (Marek Černocký) + - el (MarMav, Tom Tryfonidis) + - en_GB (Philip Withnall) + - es (Daniel Mustieles) + - gl (Fran Diéguez) + - he (Yosef Or Boczko) + - pl (Piotr Drąg) + - pt_BR (Rafael Ferreira) + - ru (Yuri Myasoedov) + + +Overview of changes in Hitori 0.4.3 +=================================== + +* Translations: + - cs (Marek Černocký) + - el (Dimitris Spingos, Tom Tryfonidis) + - es (Daniel Mustieles) + - gl (Fran Dieguez) + - id (Andika Triwidada) + - pl (Piotr Drąg) + - pt_BR (Rafael Ferreira, Enrico Nicoletto) + - sl (Matej Urbančič) + - sr (Мирослав Николић) + + +Overview of changes in Hitori 0.4.2 +=================================== -0.4.2: * Add an AppData file * Translations: -** cs (Marek Černocký) -** en_GB (Philip Withnall) -** es (Daniel Mustieles) -** fi (Jiri Grönroos) -** gl (Fran Dieguez) -** lv (Rūdofls Mazurs) -** pl (Piotr Drąg, Aviary.pl) -** pt_BR (Enrico Nicoletto) -** sl (Matej Urbančič) -** sr (Мирослав Николић) + - cs (Marek Černocký) + - en_GB (Philip Withnall) + - es (Daniel Mustieles) + - fi (Jiri Grönroos) + - gl (Fran Dieguez) + - lv (Rūdofls Mazurs) + - pl (Piotr Drąg, Aviary.pl) + - pt_BR (Enrico Nicoletto) + - sl (Matej Urbančič) + - sr (Мирослав Николић) + + +Overview of changes in Hitori 0.4.1 +=================================== -0.4.1: * Fix timer pausing on winning a game * Translations: -** cs (Marek Černocký) -** de (Mario Blättermann) -** es (Daniel Musteles) -** gl (Fran Dieguez) -** he (Yaron Shahrabani) -** hu (Balázs Úr) -** id (Andika Triwidada) -** lv (Rūdofls Mazurs) -** pt_BR (Enrico Nicoletto) -** ru (Yuri Myasoedov) + - cs (Marek Černocký) + - de (Mario Blättermann) + - es (Daniel Musteles) + - gl (Fran Dieguez) + - he (Yaron Shahrabani) + - hu (Balázs Úr) + - id (Andika Triwidada) + - lv (Rūdofls Mazurs) + - pt_BR (Enrico Nicoletto) + - ru (Yuri Myasoedov) + + +Overview of changes in Hitori 0.4.0 +=================================== -0.4.0: * Remove implicit dependency on libm * Fix l10n (bgo#652399) * Rendering improvements (bgo#652684) * Port to GtkApplication and GMenu (bgo#676601, bgo#676602) * Use yelp-tools instead of gnome-doc-utils (Oliver Propst, bgo#683623) * Translations: -** de (Mario Blättermann) -** el (Tom Tryfonidis) -** en_GB (Philip Withnall) -** fr (Gérard Baylard) -** gl (Fran Dieguez) -** id (Andika Triwidada) -** pl (Piotr Drąg, Aviary.pl) -** ro (Cristian Buzdugă, Master, Daniel Șerbănescu) -** sl (Matej Urbančič) -** sr (Мирослав Николић) + - de (Mario Blättermann) + - el (Tom Tryfonidis) + - en_GB (Philip Withnall) + - fr (Gérard Baylard) + - gl (Fran Dieguez) + - id (Andika Triwidada) + - pl (Piotr Drąg, Aviary.pl) + - ro (Cristian Buzdugă, Master, Daniel Șerbănescu) + - sl (Matej Urbančič) + - sr (Мирослав Николић) + + +Overview of changes in Hitori 0.3.0 +=================================== -0.3.0: * Port to GTK+ 3 * Add timing support (bgo#575897) * Improve the appearance of the game considerably * Update the documentation and relicence it to cc-by-sa 3.0 (from GFDL 1.2) * Translations: -** cs (Marek Černocký) -** da (Joe Hansen) -** de (Mario Blättermann) -** en_GB (Philip Withnall) -** es (Jorge González) -** fr (Gérard Baylard, Bruno Brouard) -** hu (Gabor Kelemen) -** lv (Rūdofls Mazurs) -** pt_BR (Flamarion Jorge) -** ru (Yuri Myasoedov) -** sl (Andrej Žnidaršič) -** sv (Daniel Nylander) -** vi (Lê Trường An) + - cs (Marek Černocký) + - da (Joe Hansen) + - de (Mario Blättermann) + - en_GB (Philip Withnall) + - es (Jorge González) + - fr (Gérard Baylard, Bruno Brouard) + - hu (Gabor Kelemen) + - lv (Rūdofls Mazurs) + - pt_BR (Flamarion Jorge) + - ru (Yuri Myasoedov) + - sl (Andrej Žnidaršič) + - sv (Daniel Nylander) + - vi (Lê Trường An) + + +Overview of changes in Hitori 0.2.5 +=================================== -0.2.5: * Convert documentation to Mallard format * Expand the documentation * Use upstream gettext instead of glib-gettext @@ -294,53 +394,68 @@ * Improve the board generation algorithm to allow painted cells on the board edges * Improve some translatable strings * Translations: -** de (Mario Blättermann) -** en_GB (Philip Withnall) -** es (Jorge González) -** sl (Matej Urbančič) - -0.2.4: -* Translations: -** da (Joe Hansen) -** es (Jorge González) -** gl (Fran Diéguez) -** id (Imam Musthaqim) -** nb (Kjartan Maraas, Espen Stefansen) -** sl (Andrej Žnidaršič) -** zh_CN (zhang ping) + - de (Mario Blättermann) + - en_GB (Philip Withnall) + - es (Jorge González) + - sl (Matej Urbančič) + + +Overview of changes in Hitori 0.2.4 +=================================== + +* Translations: + - da (Joe Hansen) + - es (Jorge González) + - gl (Fran Diéguez) + - id (Imam Musthaqim) + - nb (Kjartan Maraas, Espen Stefansen) + - sl (Andrej Žnidaršič) + - zh_CN (zhang ping) + + +Overview of changes in Hitori 0.2.3 +=================================== -0.2.3: * Move ChangeLogs to be generated from git logs * Fix a problem with rule 3 where it would incorrectly fail on some boards * Translations: -** fr (Laurent Coudeur, Bruno Brouard) -** zh_CN (Zhang Miao) -** hu (Tamas Nemeth) -** es (Jorge Gonzalez) -** pa (A S Alam) -** gl (Fran Dieguez) -** el (Kostas Papadimas) -** da (Kenneth Nielsen) -** cz (Marek Cernocky) + - fr (Laurent Coudeur, Bruno Brouard) + - zh_CN (Zhang Miao) + - hu (Tamas Nemeth) + - es (Jorge Gonzalez) + - pa (A S Alam) + - gl (Fran Dieguez) + - el (Kostas Papadimas) + - da (Kenneth Nielsen) + - cz (Marek Cernocky) + + +Overview of changes in Hitori 0.2.2 +=================================== -0.2.2: * Fixed how hints are drawn * Cleaned up some of the code * Fixed markup validation in the documentation * Migrated bug handling to GNOME Bugzilla (http://bugzilla.gnome.org/enter_bug.cgi?product=hitori) * Migrated website to live.gnome.org (http://live.gnome.org/Hitori) * Translations: -** de (Mario Blättermann) -** en_GB (Philip Withnall) -** es (Jorge Gonzalez) -** pt_BR (Og Maciel) -** sv (Daniel Nylander) + - de (Mario Blättermann) + - en_GB (Philip Withnall) + - es (Jorge Gonzalez) + - pt_BR (Og Maciel) + - sv (Daniel Nylander) + + +Overview of changes in Hitori 0.2.1 +=================================== -0.2.1: * Fixed some build problems * Fixed documentation licensing -0.2: + +Overview of changes in Hitori 0.2 +================================= + * Added --seed option * Added dynamic board sizing * Improvements to rendering, including Tangoisation and the use of GtkStyle @@ -351,7 +466,10 @@ * Added icon by Jakub Szypulka * Added desktop file -0.1: + +Overview of changes in Hitori 0.1 +================================= + * Project created * Board generation support * Rule-checking Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/an.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/an.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/ar.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/ar.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/as.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/as.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/be.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/be.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/bg.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/bg.gmo differ diff -Nru hitori-3.22.4/po/boldquot.sed hitori-3.31.0/po/boldquot.sed --- hitori-3.22.4/po/boldquot.sed 2017-10-02 08:07:41.000000000 +0000 +++ hitori-3.31.0/po/boldquot.sed 1970-01-01 00:00:00.000000000 +0000 @@ -1,10 +0,0 @@ -s/"\([^"]*\)"/“\1”/g -s/`\([^`']*\)'/‘\1’/g -s/ '\([^`']*\)' / ‘\1’ /g -s/ '\([^`']*\)'$/ ‘\1’/g -s/^'\([^`']*\)' /‘\1’ /g -s/“”/""/g -s/“/“/g -s/”/”/g -s/‘/‘/g -s/’/’/g Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/bs.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/bs.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/ca.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/ca.gmo differ diff -Nru hitori-3.22.4/po/ca.po hitori-3.31.0/po/ca.po --- hitori-3.22.4/po/ca.po 2017-10-02 08:11:26.000000000 +0000 +++ hitori-3.31.0/po/ca.po 2019-02-19 16:41:30.000000000 +0000 @@ -7,9 +7,8 @@ msgid "" msgstr "" "Project-Id-Version: Hitori\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" "PO-Revision-Date: 2014-09-05 00:21+0200\n" "Last-Translator: Gil Forcada \n" "Language-Team: Catalan \n" @@ -19,7 +18,7 @@ "Content-Transfer-Encoding: 8bits\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -28,10 +27,12 @@ msgid "Play the Hitori puzzle game" msgstr "Jugueu al trencaclosques Hitori" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "trencaclosques;puzle;joc;lògica;graella;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -58,59 +59,59 @@ "diferent mida, i podeu posar els marcadors a les celes per ajudar-vos a " "trobar la solució. Si us quedeu bloquejat, el joc us pot donar una pista." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "El projecte GNOME" + +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "_Joc nou" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "Mida del tauler" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "_Ajuda" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "_Quant a" - -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "_Surt" +#: data/hitori.ui:56 +msgid "_About Hitori" +msgstr "_Quan a l'Hitori" -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Desfés l'últim moviment" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Torna a fer el moviment" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Obtingueu un suggeriment per al vostre proper moviment" @@ -122,23 +123,23 @@ msgid "The size of the board, in cells." msgstr "La mida del tauler, en cel·les." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "No s'han pogut mostrar els continguts de l'ajuda" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Copyright © 2007–2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Un trencaclosques lògic dissenyat originalment per Nikoli." -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "Jordi Mas i Hernandez " -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Lloc web del Hitori" @@ -146,14 +147,17 @@ msgid "Enable debug mode" msgstr "Habilita mode de depuració" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Llavor pel generador de taulers" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "- Jugueu una partida del Hitori" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -167,15 +171,24 @@ msgid "Keep _Playing" msgstr "_Continua jugant" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Heu guanyat en un temps de %02u:%02u!" +#: src/rules.c:272 +msgid "_Quit" +msgstr "_Surt" + #: src/rules.c:273 msgid "_Play Again" msgstr "Jug_a de nou" +#~ msgid "_About" +#~ msgstr "_Quant a" + #~ msgid "UI file “%s” could not be loaded" #~ msgstr "No s'ha pogut carregar el fitxer d'interfície d'usuari «%s»" Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/ca@valencia.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/ca@valencia.gmo differ diff -Nru hitori-3.22.4/po/ca@valencia.po hitori-3.31.0/po/ca@valencia.po --- hitori-3.22.4/po/ca@valencia.po 2017-10-02 08:11:26.000000000 +0000 +++ hitori-3.31.0/po/ca@valencia.po 2019-02-19 16:41:30.000000000 +0000 @@ -1,18 +1,19 @@ # This file is distributed under the same license as the PACKAGE package. # -# Jordi Mas i Hernàndez , 2014 +# Jordi Mas i Hernàndez , 2014, 2017 # Gil Forcada , 2014. +# Jordi Serratosa , 2017. # msgid "" msgstr "" "Project-Id-Version: Hitori\n" "Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" +"product=hitori&keywords=I18N+L10N&component=General\n" +"POT-Creation-Date: 2017-10-02 08:24+0000\n" "PO-Revision-Date: 2014-09-05 00:21+0200\n" -"Last-Translator: Gil Forcada \n" +"Last-Translator: Xavi Ivars \n" "Language-Team: Catalan \n" -"Language: ca@valencia\n" +"Language: ca-valencia\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bits\n" @@ -27,13 +28,15 @@ msgid "Play the Hitori puzzle game" msgstr "Jugueu al trencaclosques Hitori" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" -msgstr "" +msgstr "trencaclosques;puzle;joc;lògica;graella;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" -msgstr "" +msgstr "org.gnome.Hitori" #. Translators: the name of the application as it appears in a software center #: data/org.gnome.Hitori.appdata.xml.in:9 @@ -55,7 +58,7 @@ "Jugueu contra rellotge, amb l'objectiu d'eliminar tots els nombres duplicats " "a cada fila i columna en el menor temps possible. Es pot jugar a taulers de " "diferent mida, i podeu posar els marcadors a les celes per ajudar-vos a " -"trobar la solució. Si vos quedeu bloquejats, el joc vos pot donar una pista." +"trobar la solució. Si vos quedeu bloquejat, el joc vos pot donar una pista." #: data/hitori-menus.ui:8 src/main.c:305 msgid "_New Game" @@ -145,14 +148,17 @@ msgid "Enable debug mode" msgstr "Habilita mode de depuració" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Llavor pel generador de taulers" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "- Jugueu una partida del Hitori" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -160,12 +166,14 @@ #: src/main.c:301 msgid "Do you want to stop the current game?" -msgstr "Voleu parar la partida actual?" +msgstr "Voleu aturar la partida actual?" #: src/main.c:304 msgid "Keep _Playing" msgstr "_Continua jugant" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" diff -Nru hitori-3.22.4/po/ChangeLog.pre-0-2-2 hitori-3.31.0/po/ChangeLog.pre-0-2-2 --- hitori-3.22.4/po/ChangeLog.pre-0-2-2 2016-12-20 13:30:40.000000000 +0000 +++ hitori-3.31.0/po/ChangeLog.pre-0-2-2 1970-01-01 00:00:00.000000000 +0000 @@ -1,85 +0,0 @@ -2009-04-06 Claude Paroz - - * LINGUAS: - * fr.po: Added French translation by Laurent Coudeur and Bruno Brouard. - -2009-04-05 Philip Withnall - - * de.po: - * en_GB.po: - * es.po: - * pt_BR.po: - * sv.po: Corrected the punctuation in the copyright string. - -2009-03-24 Daniel Nylander - - * sv.po: Updated Swedish translation. - -2009-03-19 Jorge Gonzalez - - * es.po: Added Spanish translation - * LINGUAS: Added es - -2009-03-10 Mario Blättermann - - * de.po: Added German translation. - * LINGUAS: Added de. - -2009-03-09 Philip Withnall - - * en_GB.po: Updated British English translation. - -2009-03-02 Og Maciel - - * pt_BR.po: Updated Brazilian Portuguese translation. - -2009-03-01 Og Maciel - - * pt_BR.po: Added Brazilian Portuguese translation. - * LINGUAS: Added pt_BR. - -2009-03-02 Daniel Nylander - - * sv.po: Added Swedish translation. - * LINGUAS: Added sv. - -2009-03-01 Philip Withnall - - Updated svn:ignore properties. - -2008-06-27 Philip Withnall - - * ChangeLog: Ported bzr history to ChangeLogs. - * POTFILES.in: Added the desktop file and ensured the UI file was - translatable. - * en_GB.po: Updated British English translation. - -2008-06-08 Philip Withnall - - * en_GB.po: Updated British English translation. - -2008-04-20 Philip Withnall - - * en_GB.po: Updated British English translation. - -2008-04-20 Philip Withnall - - * ChangeLog: - * LINGUAS: - * POTFILES.in: - * en_GB.po: Some Makefile cleanup. - -2007-09-03 Philip Withnall - - * en_GB.po: Updated British English translation. - -2007-09-03 Philip Withnall - - * en_GB.po: Updated British English translation. - -2007-09-03 Philip Withnall - - * LINGUAS: - * POTFILES.in: - * en_GB.po: Added en_GB (British English) translation. - Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/cs.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/cs.gmo differ diff -Nru hitori-3.22.4/po/cs.po hitori-3.31.0/po/cs.po --- hitori-3.22.4/po/cs.po 2017-10-02 08:11:26.000000000 +0000 +++ hitori-3.31.0/po/cs.po 2019-02-19 16:41:30.000000000 +0000 @@ -1,15 +1,14 @@ # Czech translation for hitori. # Copyright (C) 2009 the author(s) of hitori. # This file is distributed under the same license as the hitori package. -# Marek Černocký , 2009, 2010, 2013, 2014, 2015, 2016. +# Marek Černocký , 2009, 2010, 2013, 2014, 2015, 2016, 2019. # msgid "" msgstr "" "Project-Id-Version: hitori\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2016-12-25 17:45+0100\n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" +"PO-Revision-Date: 2019-02-06 09:59+0100\n" "Last-Translator: Marek Černocký \n" "Language-Team: čeština \n" "Language: cs\n" @@ -21,7 +20,7 @@ "X-Poedit-SourceCharset: utf-8\n" "X-Generator: Gtranslator 2.91.7\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -30,10 +29,12 @@ msgid "Play the Hitori puzzle game" msgstr "Hrát logickou hru Hitori." +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "hlavolam;hra;logická;mřížka;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -60,59 +61,59 @@ "při hledání řešení si můžete pomáhat umísťováním značek do políček. Když se " "zaseknete, umí vám hra nabídnout radu." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "Projekt GNOME" + +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "_Nová hra" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "_Velikost hrací desky" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "_Nápověda" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "O _aplikaci" - -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "U_končit" +#: data/hitori.ui:56 +msgid "_About Hitori" +msgstr "O _aplikaci Hitori" -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Vrátit zpět poslední tah" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Znovu provést poslední vrácený tah" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Získat radu k příštímu tahu" @@ -124,23 +125,23 @@ msgid "The size of the board, in cells." msgstr "Velikost hrací desky udaná v počtu políček." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "Nelze zobrazit obsah nápovědy" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Copyright © 2007–2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Logický hlavolam původně pocházející od Nikoli." -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "Marek Černocký " -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Webové stránky Hitori" @@ -148,14 +149,17 @@ msgid "Enable debug mode" msgstr "Povolit režim ladění" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Počáteční číslo pro generování hrací desky" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "– hrát hru Hitori" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -169,14 +173,23 @@ msgid "Keep _Playing" msgstr "_Pokračovat ve hře" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Vyhráli jste v čase %02u∶%02u!" +#: src/rules.c:272 +msgid "_Quit" +msgstr "U_končit" + #: src/rules.c:273 msgid "_Play Again" msgstr "H_rát znovu" +#~ msgid "_About" +#~ msgstr "O _aplikaci" + #~ msgid "UI file “%s” could not be loaded" #~ msgstr "Nelze načíst soubor „%s“ s uživatelským rozhraním." Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/da.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/da.gmo differ diff -Nru hitori-3.22.4/po/da.po hitori-3.31.0/po/da.po --- hitori-3.22.4/po/da.po 2017-10-02 08:11:26.000000000 +0000 +++ hitori-3.31.0/po/da.po 2019-02-19 16:41:30.000000000 +0000 @@ -1,15 +1,14 @@ # Danish translation for hitori. -# Copyright (C) 2013 hitori & nedenstående oversættere. +# Copyright (C) 2019 hitori & nedenstående oversættere. # This file is distributed under the same license as the hitori package. -# Joe Hansen (joedalton2@yahoo.dk), 2009, 2010, 2011, 2013, 2017. +# Joe Hansen (joedalton2@yahoo.dk), 2009, 2010, 2011, 2013, 2017, 2019. # msgid "" msgstr "" "Project-Id-Version: hitori master\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2017-02-24 15:29+0100\n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" +"PO-Revision-Date: 2019-02-14 15:29+0100\n" "Last-Translator: Joe Hansen \n" "Language-Team: Danish \n" "Language: da\n" @@ -18,7 +17,7 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -27,10 +26,12 @@ msgid "Play the Hitori puzzle game" msgstr "Læg puslespillet Hitori" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "tænkespil;puslespil;spil;logik;gitter;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -57,59 +58,59 @@ "brætstørrelser, og du kan placere markører på cellerne for at hjælpe med at " "finde løsningen. Hvis du sidder fast, kan du få fif." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "GNOME-projektet" + +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "_Nyt spil" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "Bræt_størrelse" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "_Hjælp" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "_Om" - -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "_Afslut" +#: data/hitori.ui:56 +msgid "_About Hitori" +msgstr "_Om Hitori" -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Fortryd dit sidste træk" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Omgør et træk" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Få et fif til dit næste træk" @@ -121,27 +122,27 @@ msgid "The size of the board, in cells." msgstr "Størrelsen på brættet i celler." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "Hjælpeindholdet kunne ikke vises" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Ophavsret © 2007-2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Et logisk puslespil oprindeligt designet af Nikoli" -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "" -"Joe Hansen , 2009, 2010, 2011, 2013, 2017.\n" +"Joe Hansen , 2009, 2010, 2011, 2013, 2017, 2019.\n" "\n" "Dansk-gruppen \n" "Mere info: http://www.dansk-gruppen.dk" -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Hitoris hjemmeside" @@ -149,14 +150,17 @@ msgid "Enable debug mode" msgstr "Slå fejlsøgningstilstand til" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Grundlagstal for brætoprettelsen" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "- Spil Hitori" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -170,11 +174,20 @@ msgid "Keep _Playing" msgstr "Fortsæt med at _spille" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Du har vundet. Din tid blev %02u:%02u!" +#: src/rules.c:272 +msgid "_Quit" +msgstr "_Afslut" + #: src/rules.c:273 msgid "_Play Again" msgstr "_Nyt spil" + +#~ msgid "_About" +#~ msgstr "_Om" Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/de.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/de.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/el.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/el.gmo differ diff -Nru hitori-3.22.4/po/el.po hitori-3.31.0/po/el.po --- hitori-3.22.4/po/el.po 2017-10-02 08:11:26.000000000 +0000 +++ hitori-3.31.0/po/el.po 2019-02-19 16:41:30.000000000 +0000 @@ -5,20 +5,19 @@ msgid "" msgstr "" "Project-Id-Version: hitori.master.el\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2017-04-06 13:01+0300\n" -"Last-Translator: Tom Tryfonidis \n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" +"PO-Revision-Date: 2018-12-24 15:08+0200\n" +"Last-Translator: Efstathios Iosifidis \n" "Language-Team: Greek, Modern (1453-) \n" "Language: el\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Generator: Poedit 1.8.11\n" +"X-Generator: Poedit 2.0.7\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -27,10 +26,12 @@ msgid "Play the Hitori puzzle game" msgstr "Παίξτε το παιχνίδι παζλ Hitori" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "γρίφος;παιχνίδι;λογική;πλέγμα;puzzle;game;logic;grid;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -60,59 +61,59 @@ "δείκτες στα κελιά για να βοηθηθείτε με τη λύση. Αν κολλήσετε, το παιχνίδι " "μπορεί να σας δώσει και μια υπόδειξη." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "Το έργο GNOME" + +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "_Νέο παιχνίδι" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "_Μέγεθος πίνακα" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "_Βοήθεια" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "_Περί" - -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "Έ_ξοδος" +#: data/hitori.ui:56 +msgid "_About Hitori" +msgstr "_Περί του Hitori" -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Αναίρεση της τελευταίας σας κίνησης" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Επανάληψη κίνησης" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Λήψη υπόδειξης για την επόμενη κίνησή σας" @@ -124,19 +125,19 @@ msgid "The size of the board, in cells." msgstr "Το μέγεθος του πίνακα, σε κελιά." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "Τα περιεχόμενα βοήθειας δε μπορούν να εμφανιστούν" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Πνευματικά δικαιώματα © 2007–2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Ένα παιχνίδι λογικής σχεδιασμένο από τον Nikoli" -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "" "Ελληνική μεταφραστική ομάδα GNOME\n" @@ -146,7 +147,7 @@ "Για περισσότερες πληροφορίες, επισκεφθείτε την σελίδα\n" "http://gnome.gr/" -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Ιστότοπος του Hitori" @@ -154,14 +155,17 @@ msgid "Enable debug mode" msgstr "Ενεργοποίηση κατάστασης αποσφαλμάτωσης" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Αριθμός seed για τη δημιουργία του πίνακα." +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "- Παίξτε ένα παιχνίδι Hitori" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -175,15 +179,24 @@ msgid "Keep _Playing" msgstr "Ε_ξακολούθηση παιχνιδιού" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Κερδίσαμε με χρόνο %02u:%02u!" +#: src/rules.c:272 +msgid "_Quit" +msgstr "Έ_ξοδος" + #: src/rules.c:273 msgid "_Play Again" msgstr "Παίξτε _ξανά" +#~ msgid "_About" +#~ msgstr "_Περί" + #~ msgid "UI file “%s” could not be loaded" #~ msgstr "Το αρχείο UI “%s” δεν μπόρεσε να φορτωθεί" diff -Nru hitori-3.22.4/po/en@boldquot.header hitori-3.31.0/po/en@boldquot.header --- hitori-3.22.4/po/en@boldquot.header 2017-10-02 08:07:41.000000000 +0000 +++ hitori-3.31.0/po/en@boldquot.header 1970-01-01 00:00:00.000000000 +0000 @@ -1,25 +0,0 @@ -# All this catalog "translates" are quotation characters. -# The msgids must be ASCII and therefore cannot contain real quotation -# characters, only substitutes like grave accent (0x60), apostrophe (0x27) -# and double quote (0x22). These substitutes look strange; see -# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html -# -# This catalog translates grave accent (0x60) and apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019). -# It also translates pairs of apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019) -# and pairs of quotation mark (0x22) to -# left double quotation mark (U+201C) and right double quotation mark (U+201D). -# -# When output to an UTF-8 terminal, the quotation characters appear perfectly. -# When output to an ISO-8859-1 terminal, the single quotation marks are -# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to -# grave/acute accent (by libiconv), and the double quotation marks are -# transliterated to 0x22. -# When output to an ASCII terminal, the single quotation marks are -# transliterated to apostrophes, and the double quotation marks are -# transliterated to 0x22. -# -# This catalog furthermore displays the text between the quotation marks in -# bold face, assuming the VT100/XTerm escape sequences. -# Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/en_GB.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/en_GB.gmo differ diff -Nru hitori-3.22.4/po/en@quot.header hitori-3.31.0/po/en@quot.header --- hitori-3.22.4/po/en@quot.header 2017-10-02 08:07:41.000000000 +0000 +++ hitori-3.31.0/po/en@quot.header 1970-01-01 00:00:00.000000000 +0000 @@ -1,22 +0,0 @@ -# All this catalog "translates" are quotation characters. -# The msgids must be ASCII and therefore cannot contain real quotation -# characters, only substitutes like grave accent (0x60), apostrophe (0x27) -# and double quote (0x22). These substitutes look strange; see -# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html -# -# This catalog translates grave accent (0x60) and apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019). -# It also translates pairs of apostrophe (0x27) to -# left single quotation mark (U+2018) and right single quotation mark (U+2019) -# and pairs of quotation mark (0x22) to -# left double quotation mark (U+201C) and right double quotation mark (U+201D). -# -# When output to an UTF-8 terminal, the quotation characters appear perfectly. -# When output to an ISO-8859-1 terminal, the single quotation marks are -# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to -# grave/acute accent (by libiconv), and the double quotation marks are -# transliterated to 0x22. -# When output to an ASCII terminal, the single quotation marks are -# transliterated to apostrophes, and the double quotation marks are -# transliterated to 0x22. -# Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/eo.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/eo.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/es.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/es.gmo differ diff -Nru hitori-3.22.4/po/es.po hitori-3.31.0/po/es.po --- hitori-3.22.4/po/es.po 2017-10-02 08:11:26.000000000 +0000 +++ hitori-3.31.0/po/es.po 2019-02-19 16:41:30.000000000 +0000 @@ -2,25 +2,24 @@ # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # Jorge González , 2009, 2010. -# Daniel Mustieles , 2012, 2013, 2014, 2017. +# Daniel Mustieles , 2012, 2013, 2014, 2017, 2018, 2019. # msgid "" msgstr "" "Project-Id-Version: hitori.master\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2017-01-11 10:06+0100\n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" +"PO-Revision-Date: 2019-01-04 13:05+0100\n" "Last-Translator: Daniel Mustieles \n" "Language-Team: es \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Generator: Gtranslator 2.91.6\n" +"X-Generator: Gtranslator 2.91.7\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -29,10 +28,12 @@ msgid "Play the Hitori puzzle game" msgstr "Jugar al juego de puzle Hitori" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "puzle;juego;lógica;rejilla;tablero;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -59,59 +60,59 @@ "tamaños de tablero y puede colocar marcadores en las celdas para ayudarle a " "encontrar la solución. Si tiene problemas, el juego puede darle una pista." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "El Proyecto GNOME" + +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "Juego _nuevo" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "_Tamaño del tablero" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5x5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6x6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "Ay_uda" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "A_cerca de" - -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "_Salir" +#: data/hitori.ui:56 +msgid "_About Hitori" +msgstr "_Acerca de Hitori" -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Deshacer el último movimiento" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Rehacer un movimiento" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Obtener una pista para el siguiente movimiento" @@ -123,23 +124,23 @@ msgid "The size of the board, in cells." msgstr "El tamaño del tablero, en casillas." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "No se pudo mostrar el contenido de la ayuda" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Copyright © 2007–2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Un puzle de lógica diseñado originalmente por Nikoli" -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "Jorge González , 2007-2008" -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Página web de Hitori" @@ -147,14 +148,17 @@ msgid "Enable debug mode" msgstr "Activar modo de depuración" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Alimentar la generación de tableros" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "- Jugar una partida de Hitori" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -168,15 +172,24 @@ msgid "Keep _Playing" msgstr "Seguir _jugando" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Ha ganado con un tiempo de %02u:%02u." +#: src/rules.c:272 +msgid "_Quit" +msgstr "_Salir" + #: src/rules.c:273 msgid "_Play Again" msgstr "Jugar _otra vez" +#~ msgid "_About" +#~ msgstr "A_cerca de" + #~ msgid "UI file “%s” could not be loaded" #~ msgstr "No se pudo cargar el archivo de interfaz de usuario «%s»" Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/eu.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/eu.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/fa.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/fa.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/fi.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/fi.gmo differ diff -Nru hitori-3.22.4/po/fi.po hitori-3.31.0/po/fi.po --- hitori-3.22.4/po/fi.po 2017-10-02 08:11:26.000000000 +0000 +++ hitori-3.31.0/po/fi.po 2019-02-19 16:41:30.000000000 +0000 @@ -7,10 +7,9 @@ msgid "" msgstr "" "Project-Id-Version: hitori master\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2016-12-25 14:54+0200\n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" +"PO-Revision-Date: 2019-02-05 21:28+0200\n" "Last-Translator: Jiri Grönroos \n" "Language-Team: suomi \n" "Language: fi\n" @@ -18,9 +17,9 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Gtranslator 2.91.7\n" +"X-Generator: Poedit 2.0.6\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -29,10 +28,12 @@ msgid "Play the Hitori puzzle game" msgstr "Pelaa Hitori-pulmapeliä" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "puzzle;game;logic;grid;pulma;peli;logiikka;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -59,59 +60,59 @@ "Peli tukee useita eri laudan kokoja, halutessasi voit asettaa merkkejä " "soluihin ratkaisun selvittämiseksi. Jos olet jumissa, peli voi antaa vihjeen." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "Gnome-projekti" + +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "_Uusi peli" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "Lau_dan koko" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "_Ohje" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "_Tietoja" - -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "_Lopeta" +#: data/hitori.ui:56 +msgid "_About Hitori" +msgstr "_Tietoja - Hitori" -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Kumoa viimeisin siirto" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Tee uudelleen siirto" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Pyydä vihje seuraavaa siirtoa varten" @@ -123,23 +124,23 @@ msgid "The size of the board, in cells." msgstr "Laudan koko soluissa." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "Ohjeen sisällön näyttäminen epäonnistui" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Tekijänoikeus © 2007–2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" -msgstr "Alkujaan Nikolin suunnittelema logiikkapeli." +msgstr "Alkujaan Nikolin suunnittelema logiikkapeli" -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "Jiri Grönroos" -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Hitorin verkkosivusto" @@ -147,14 +148,17 @@ msgid "Enable debug mode" msgstr "Käytä vianetsintätilaa" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Esiasteuta laudan luonti" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "- Pelaa Hitori-peliä" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -168,15 +172,24 @@ msgid "Keep _Playing" msgstr "Jatka _pelaamista" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Sinulta kului aikaa voittamiseen %02u:%02u!" +#: src/rules.c:272 +msgid "_Quit" +msgstr "_Lopeta" + #: src/rules.c:273 msgid "_Play Again" msgstr "Pelaa _uudelleen" +#~ msgid "_About" +#~ msgstr "_Tietoja" + #~ msgid "UI file “%s” could not be loaded" #~ msgstr "Käyttöliittymätiedoston \"%s\" lataaminen epäonnistui" Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/fr.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/fr.gmo differ diff -Nru hitori-3.22.4/po/fr.po hitori-3.31.0/po/fr.po --- hitori-3.22.4/po/fr.po 2017-10-02 08:11:26.000000000 +0000 +++ hitori-3.31.0/po/fr.po 2019-02-19 16:41:30.000000000 +0000 @@ -5,24 +5,24 @@ # laurent coudeur , 2009. # Bruno Brouard , 2009. # Gérard Baylard , 2010. +# Charles Monzat , 2018. # msgid "" msgstr "" "Project-Id-Version: hitori.HEAD\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2017-09-08 15:43+0100\n" -"Last-Translator: Charles Monzat \n" -"Language-Team: Français >\n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-11-07 09:36+0000\n" +"PO-Revision-Date: 2018-11-07 11:09+0100\n" +"Last-Translator: Charles Monzat \n" +"Language-Team: français \n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=n>1;\n" -"X-Generator: Poedit 1.8.11\n" +"Plural-Forms: nplurals=2; plural=(n > 1);\n" +"X-Generator: Gtranslator 2.91.7\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -31,10 +31,12 @@ msgid "Play the Hitori puzzle game" msgstr "Jouer au casse-tête Hitori" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "casse-tête;jeu;logique;grille;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -56,65 +58,62 @@ "board are supported, and you can place markers on cells to help work out the " "solution. If you get stuck, the game can give you a hint." msgstr "" -"Vous jouez contre la montre, l’objectif étant d’éliminer tout les nombres en " +"Vous jouez contre la montre, l’objectif étant d’éliminer tous les nombres en " "double dans chaque ligne et colonne le plus rapidement possible. Plusieurs " "tailles de plateau sont proposées et vous pouvez placer des marqueurs sur " "des cellules afin d’aider à trouver une solution. Si vous êtes bloqué, le " "jeu peut vous donner un indice." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "_Nouvelle partie" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "_Taille du plateau" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "Aid_e" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "_À propos" +#: data/hitori.ui:56 +#| msgid "Hitori" +msgid "_About Hitori" +msgstr "À _propos de Hitori" -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "_Quitter" - -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Annuler votre dernier mouvement" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Refaire un mouvement" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Obtenir un indice pour votre prochain mouvement" @@ -126,26 +125,26 @@ msgid "The size of the board, in cells." msgstr "Taille du plateau, en cellules" -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "Impossible d’afficher le contenu de l’aide" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Copyright © 2007–2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Un casse-tête de logique conçu à l’origine par Nikoli." -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "" "Laurent Coudeur , 2009\n" "Bruno Brouard , 2009\n" "Géode,2010" -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Site Web de Hitori" @@ -153,14 +152,17 @@ msgid "Enable debug mode" msgstr "Activer le mode débogage" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Germe de nombre aléatoire pour la génération du plateau" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "- Jouer à une partie de Hitori" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -174,16 +176,25 @@ msgid "Keep _Playing" msgstr "Continuer à _jouer" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Vous avez résolu le puzzle en %02u:%02u !" +#: src/rules.c:272 +msgid "_Quit" +msgstr "_Quitter" + # ... ou Jouer à Nouveau, c’est à voir. #: src/rules.c:273 msgid "_Play Again" msgstr "_Rejouer" +#~ msgid "_About" +#~ msgstr "_À propos" + #~ msgid "UI file “%s” could not be loaded" #~ msgstr "Impossible de charger le fichier d'interface utilisateur « %s »." Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/fur.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/fur.gmo differ diff -Nru hitori-3.22.4/po/fur.po hitori-3.31.0/po/fur.po --- hitori-3.22.4/po/fur.po 2017-10-02 08:11:26.000000000 +0000 +++ hitori-3.31.0/po/fur.po 2019-02-19 16:41:30.000000000 +0000 @@ -6,19 +6,18 @@ msgid "" msgstr "" "Project-Id-Version: hitori master\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2016-12-28 22:32+0100\n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" +"PO-Revision-Date: 2018-12-24 18:21+0100\n" "Last-Translator: Fabio Tomat \n" "Language-Team: Friulian \n" "Language: fur\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Generator: Poedit 1.8.11\n" +"X-Generator: Poedit 2.2\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -27,10 +26,12 @@ msgid "Play the Hitori puzzle game" msgstr "Zuie al berdei Hitori" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "puzzle;zûc;logjiche;gridele;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -56,59 +57,59 @@ "colone. Aumente il numar di celis e tu puedis meti marcaduris par judâti te " "soluzion. Se tu ti impantanis il zûc al pues judâti." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "Il progjet GNOME" + +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "_Gnove partide" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "Dimension _Taule" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "_Jutori" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "_Informazions" - -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "_Jes" +#: data/hitori.ui:56 +msgid "_About Hitori" +msgstr "_Informazions su Hitori" -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Anule ultime mosse" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Ripet une mosse" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Sugjeriment pe prossime mosse" @@ -120,23 +121,23 @@ msgid "The size of the board, in cells." msgstr "La dimension de taule in celis." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "I contignûts dal jutori no puedin jessi mostrâts" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Copyright © 2007–2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Un berdei di logjiche progjetât in origjin di Nikoli" -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "Fabio Tomat " -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Sît web di Hitori" @@ -144,14 +145,17 @@ msgid "Enable debug mode" msgstr "Abilite modalitât debug" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Gjenerazion de taule cun seed" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "- Zuie a Hitori" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -165,11 +169,20 @@ msgid "Keep _Playing" msgstr "Continue _Zuie" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Tu âs vinçût cuntun timp di %02u:%02u!" +#: src/rules.c:272 +msgid "_Quit" +msgstr "_Jes" + #: src/rules.c:273 msgid "_Play Again" msgstr "_Zuie di gnûf" + +#~ msgid "_About" +#~ msgstr "_Informazions" Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/gl.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/gl.gmo differ diff -Nru hitori-3.22.4/po/gl.po hitori-3.31.0/po/gl.po --- hitori-3.22.4/po/gl.po 2017-10-02 08:11:26.000000000 +0000 +++ hitori-3.31.0/po/gl.po 2019-02-19 16:41:30.000000000 +0000 @@ -2,26 +2,25 @@ # Copyright (C) 2009 hitori's COPYRIGHT HOLDER # This file is distributed under the same license as the hitori package. # Fran Diéguez , 2009, 2010. -# Fran Dieguez , 2012, 2013, 2014, 2015, 2017. +# Fran Dieguez , 2012-2019. # msgid "" msgstr "" "Project-Id-Version: hitori master\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2017-03-11 03:43+0100\n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" +"PO-Revision-Date: 2019-01-29 00:09+0100\n" "Last-Translator: Fran Dieguez \n" -"Language-Team: Galician \n" +"Language-Team: Galician \n" "Language: gl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" -"X-Generator: Gtranslator 2.91.7\n" +"Plural-Forms: nplurals=2; plural=(n != 1)\n" +"X-Generator: Gtranslator 3.30.0\n" "X-Project-Style: gnome\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -30,10 +29,12 @@ msgid "Play the Hitori puzzle game" msgstr "Xogue ao xogo de crebacabezas Hitori" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "quebracabezas;xogo;lóxica;grella;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -60,59 +61,60 @@ "de varios tamaños e pode dispor marcadores nas celas que lle axuden a acadar " "unha solución. Se se atasca, o xogo daralle un consello." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "O Proxecto GNOME" + +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "_Novo xogo" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "_Tamaño do taboleiro" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "_Axuda" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "_Sobre" - -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "_Saír" +#: data/hitori.ui:56 +#| msgid "Hitori" +msgid "_About Hitori" +msgstr "Sobre _Hitori" -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Desfacer o último movemento" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Refacer un movemento" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Obter unha suxestión para o seu novo movemento" @@ -124,23 +126,23 @@ msgid "The size of the board, in cells." msgstr "O tamaño do taboleiro, en celas." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "Non foi posíbel mostrar os contidos da axuda." -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Copyright © 2007–2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Un crebacabezas lóxico orixinalmente deseñado por Nikoli." -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "Fran Dieguez , 2014-2015." -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Páxina web de Hitori" @@ -148,14 +150,17 @@ msgid "Enable debug mode" msgstr "Activar modo de depuración" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Alimentar a xeración de taboleiros" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "- Xogar un xogo de Hitori" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -169,15 +174,24 @@ msgid "Keep _Playing" msgstr "Seguir _xogando" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Gañou cun tempo de %02u:%02u!" +#: src/rules.c:272 +msgid "_Quit" +msgstr "_Saír" + #: src/rules.c:273 msgid "_Play Again" msgstr "_Xogar de novo" +#~ msgid "_About" +#~ msgstr "_Sobre" + #~ msgid "UI file “%s” could not be loaded" #~ msgstr "Non é posíbel cargar o ficheiro de IU \"%s\"." Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/he.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/he.gmo differ diff -Nru hitori-3.22.4/po/hitori.pot hitori-3.31.0/po/hitori.pot --- hitori-3.22.4/po/hitori.pot 2017-10-02 08:08:10.000000000 +0000 +++ hitori-3.31.0/po/hitori.pot 1970-01-01 00:00:00.000000000 +0000 @@ -1,172 +0,0 @@ -# SOME DESCRIPTIVE TITLE. -# Copyright (C) YEAR authors -# This file is distributed under the same license as the hitori package. -# FIRST AUTHOR , YEAR. -# -#, fuzzy -msgid "" -msgstr "" -"Project-Id-Version: hitori 3.22.4\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"Language: \n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" - -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 -msgid "Hitori" -msgstr "" - -#. Translators: the brief summary of the application as it appears in a software center. -#: data/org.gnome.Hitori.desktop.in:4 data/org.gnome.Hitori.appdata.xml.in:12 -msgid "Play the Hitori puzzle game" -msgstr "" - -#: data/org.gnome.Hitori.desktop.in:6 -msgid "puzzle;game;logic;grid;" -msgstr "" - -#: data/org.gnome.Hitori.desktop.in:9 -msgid "org.gnome.Hitori" -msgstr "" - -#. Translators: the name of the application as it appears in a software center -#: data/org.gnome.Hitori.appdata.xml.in:9 -msgid "GNOME Hitori" -msgstr "" - -#. Translators: These are the application description paragraphs in the AppData file. -#: data/org.gnome.Hitori.appdata.xml.in:16 -msgid "Hitori is a logic game similar to the popular game of Sudoku." -msgstr "" - -#: data/org.gnome.Hitori.appdata.xml.in:17 -msgid "" -"You play the game against the clock, aiming to eliminate all the duplicate " -"numbers in each row and column in the fastest time. Multiple sizes of game " -"board are supported, and you can place markers on cells to help work out the " -"solution. If you get stuck, the game can give you a hint." -msgstr "" - -#: data/hitori-menus.ui:8 src/main.c:305 -msgid "_New Game" -msgstr "" - -#: data/hitori-menus.ui:12 -msgid "Board _Size" -msgstr "" - -#: data/hitori-menus.ui:16 -msgid "5×5" -msgstr "" - -#: data/hitori-menus.ui:21 -msgid "6×6" -msgstr "" - -#: data/hitori-menus.ui:26 -msgid "7×7" -msgstr "" - -#: data/hitori-menus.ui:31 -msgid "8×8" -msgstr "" - -#: data/hitori-menus.ui:36 -msgid "9×9" -msgstr "" - -#: data/hitori-menus.ui:41 -msgid "10×10" -msgstr "" - -#: data/hitori-menus.ui:50 -msgid "_Help" -msgstr "" - -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "" - -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "" - -#: data/hitori.ui:29 -msgid "Undo your last move" -msgstr "" - -#: data/hitori.ui:51 -msgid "Redo a move" -msgstr "" - -#: data/hitori.ui:75 -msgid "Get a hint for your next move" -msgstr "" - -#: data/org.gnome.hitori.gschema.xml:6 -msgid "Board size" -msgstr "" - -#: data/org.gnome.hitori.gschema.xml:7 -msgid "The size of the board, in cells." -msgstr "" - -#: src/interface.c:649 -msgid "The help contents could not be displayed" -msgstr "" - -#: src/interface.c:673 -msgid "Copyright © 2007–2010 Philip Withnall" -msgstr "" - -#: src/interface.c:674 -msgid "A logic puzzle originally designed by Nikoli" -msgstr "" - -#: src/interface.c:676 -msgid "translator-credits" -msgstr "" - -#: src/interface.c:680 -msgid "Hitori Website" -msgstr "" - -#: src/main.c:209 -msgid "Enable debug mode" -msgstr "" - -#: src/main.c:211 -msgid "Seed the board generation" -msgstr "" - -#: src/main.c:225 -msgid "- Play a game of Hitori" -msgstr "" - -#: src/main.c:235 -#, c-format -msgid "Command line options could not be parsed: %s\n" -msgstr "" - -#: src/main.c:301 -msgid "Do you want to stop the current game?" -msgstr "" - -#: src/main.c:304 -msgid "Keep _Playing" -msgstr "" - -#: src/rules.c:267 -#, c-format -msgid "You’ve won in a time of %02u:%02u!" -msgstr "" - -#: src/rules.c:273 -msgid "_Play Again" -msgstr "" diff -Nru hitori-3.22.4/po/hr.po hitori-3.31.0/po/hr.po --- hitori-3.22.4/po/hr.po 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/po/hr.po 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1,186 @@ +# Croatian translation for hitori. +# Copyright (C) 2018 hitori's COPYRIGHT HOLDER +# This file is distributed under the same license as the hitori package. +# FIRST AUTHOR , YEAR. +# +msgid "" +msgstr "" +"Project-Id-Version: hitori master\n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-02-07 23:56+0000\n" +"PO-Revision-Date: 2018-03-14 14:06+0100\n" +"Language-Team: Croatian \n" +"Language: hr\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" +"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" +"Last-Translator: \n" +"X-Generator: Poedit 2.0.6\n" + +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +msgid "Hitori" +msgstr "Hitori" + +#. Translators: the brief summary of the application as it appears in a software center. +#: data/org.gnome.Hitori.desktop.in:4 data/org.gnome.Hitori.appdata.xml.in:12 +msgid "Play the Hitori puzzle game" +msgstr "Igrajte Hitori igru slagalice" + +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! +#: data/org.gnome.Hitori.desktop.in:6 +msgid "puzzle;game;logic;grid;" +msgstr "slagalica;igra;logika;mreža;" + +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! +#: data/org.gnome.Hitori.desktop.in:9 +msgid "org.gnome.Hitori" +msgstr "org.gnome.Hitori" + +#. Translators: the name of the application as it appears in a software center +#: data/org.gnome.Hitori.appdata.xml.in:9 +msgid "GNOME Hitori" +msgstr "GNOME Hitori" + +#. Translators: These are the application description paragraphs in the AppData file. +#: data/org.gnome.Hitori.appdata.xml.in:16 +msgid "Hitori is a logic game similar to the popular game of Sudoku." +msgstr "Hitori je logička igra slična popularnoj igri Sudoku." + +#: data/org.gnome.Hitori.appdata.xml.in:17 +msgid "" +"You play the game against the clock, aiming to eliminate all the duplicate " +"numbers in each row and column in the fastest time. Multiple sizes of game " +"board are supported, and you can place markers on cells to help work out the " +"solution. If you get stuck, the game can give you a hint." +msgstr "" +"Igrate igru protiv vremena, s ciljem eliminacije svih duplih brojeva u " +"svakom redku i stupcu u što mogućem kraćem vremenu. Više veličina igrače " +"ploče je podržana a možete i smjestiti oznake na ćelije za pomoć pronalaska " +"rješenja. Ako zapnete, igra vam može dati savjet." + +#: data/hitori-menus.ui:8 src/main.c:305 +msgid "_New Game" +msgstr "_Nova igra" + +#: data/hitori-menus.ui:12 +msgid "Board _Size" +msgstr "Veličina _ploče" + +#: data/hitori-menus.ui:16 +msgid "5×5" +msgstr "5×5" + +#: data/hitori-menus.ui:21 +msgid "6×6" +msgstr "6×6" + +#: data/hitori-menus.ui:26 +msgid "7×7" +msgstr "7×7" + +#: data/hitori-menus.ui:31 +msgid "8×8" +msgstr "8×8" + +#: data/hitori-menus.ui:36 +msgid "9×9" +msgstr "9×9" + +#: data/hitori-menus.ui:41 +msgid "10×10" +msgstr "10×10" + +#: data/hitori-menus.ui:50 +msgid "_Help" +msgstr "_Priručnik" + +#: data/hitori-menus.ui:55 +msgid "_About" +msgstr "_O programu" + +#: data/hitori-menus.ui:59 src/rules.c:272 +msgid "_Quit" +msgstr "_Zatvori" + +#: data/hitori.ui:29 +msgid "Undo your last move" +msgstr "Poništi posljednji potez" + +#: data/hitori.ui:51 +msgid "Redo a move" +msgstr "Ponovi posljednji potez" + +#: data/hitori.ui:75 +msgid "Get a hint for your next move" +msgstr "Dobijte savjet za svoj sljedeći potez" + +#: data/org.gnome.hitori.gschema.xml:6 +msgid "Board size" +msgstr "Veličina ploče" + +#: data/org.gnome.hitori.gschema.xml:7 +msgid "The size of the board, in cells." +msgstr "Veličina ploče, u ćelijama." + +#: src/interface.c:649 +msgid "The help contents could not be displayed" +msgstr "Sadržaj pomoći se ne može prikazati" + +#: src/interface.c:673 +msgid "Copyright © 2007–2010 Philip Withnall" +msgstr "Autorsko pravo © 2007–2010 Philip Withnall" + +#: src/interface.c:674 +msgid "A logic puzzle originally designed by Nikoli" +msgstr "Logička slagalica izvorno dizajnirana od strane Nikoli" + +#: src/interface.c:676 +msgid "translator-credits" +msgstr "" +"Launchpad Contributions:\n" +" gogo https://launchpad.net/~trebelnik-stefina" + +#: src/interface.c:680 +msgid "Hitori Website" +msgstr "Hitori web stranica" + +#: src/main.c:209 +msgid "Enable debug mode" +msgstr "Omogući način otklanjanja greške" + +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board +#: src/main.c:211 +msgid "Seed the board generation" +msgstr "Odaberi broj stvaranja ploče" + +#. Options +#: src/main.c:225 +msgid "- Play a game of Hitori" +msgstr "- Zaigrajte igru Hitori" + +#. Print an error +#: src/main.c:235 +#, c-format +msgid "Command line options could not be parsed: %s\n" +msgstr "Mogućnosti naredbenog redka se ne mogu obraditi: %s\n" + +#: src/main.c:301 +msgid "Do you want to stop the current game?" +msgstr "Želite li prekinuti trenutnu igru?" + +#: src/main.c:304 +msgid "Keep _Playing" +msgstr "Nastavi _igrati" + +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. +#: src/rules.c:267 +#, c-format +msgid "You’ve won in a time of %02u:%02u!" +msgstr "Pobijedili ste u vremenu %02u:%02u!" + +#: src/rules.c:273 +msgid "_Play Again" +msgstr "_Igraj ponovno" Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/hu.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/hu.gmo differ diff -Nru hitori-3.22.4/po/hu.po hitori-3.31.0/po/hu.po --- hitori-3.22.4/po/hu.po 2017-10-02 08:11:27.000000000 +0000 +++ hitori-3.31.0/po/hu.po 2019-02-19 16:41:30.000000000 +0000 @@ -1,27 +1,26 @@ -# Hungarian translation of Hitori. -# Copyright (C) 2009 Free Software Foundation, inc. -# This file is distributed under the same license as the Hitori package. +# Hungarian translation for hitori. +# Copyright (C) 2009, 2010, 2014, 2019 Free Software Foundation, inc. +# This file is distributed under the same license as the hitori package. # # Németh Tamás , 2009. # Gabor Kelemen , 2009, 2010, 2014. -# Balázs Úr , 2013, 2014. +# Balázs Úr , 2013, 2014, 2019. msgid "" msgstr "" -"Project-Id-Version: Hitori master\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2016-12-29 11:08+0100\n" -"Last-Translator: Meskó Balázs \n" -"Language-Team: Hungarian \n" +"Project-Id-Version: hitori master\n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" +"PO-Revision-Date: 2019-01-27 16:40+0100\n" +"Last-Translator: Balázs Úr \n" +"Language-Team: Hungarian \n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Generator: Poedit 1.8.11\n" +"X-Generator: Lokalize 1.2\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -30,10 +29,12 @@ msgid "Play the Hitori puzzle game" msgstr "Japán eredetű logikai játék a számokkal" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "fejtörő;puzzle;játék;logika;rács;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -60,59 +61,59 @@ "elhelyezett jelölők segítségével pedig könnyíthető a megoldás. Ha elakad, a " "játék tud tippet is adni." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "A GNOME projekt" + +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "Ú_j játék" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "Tábla_méret" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "_Súgó" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "_Névjegy" +#: data/hitori.ui:56 +msgid "_About Hitori" +msgstr "A Hitori _névjegye" -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "_Kilépés" - -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Az utolsó lépés visszavonása" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Visszavont lépés végrehajtása mégis" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Javaslat a következő lépéshez" @@ -124,25 +125,25 @@ msgid "The size of the board, in cells." msgstr "A tábla mérete cellákban." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "A súgó tartalma nem jeleníthető meg" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Copyright © 2007–2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Eredetileg Nikoli által megalkotott logikai játék" -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "" "Kelemen Gábor \n" "Németh Tamás " -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "A Hitori honlapja" @@ -150,14 +151,17 @@ msgid "Enable debug mode" msgstr "Hibakereső üzemmód bekapcsolása" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Táblagenerálás kezdőértéke" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr " - Játsszon egyet a Hitorival" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -171,60 +175,18 @@ msgid "Keep _Playing" msgstr "_Játék folytatása" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Ön nyert, %02u:%02u idő alatt!" +#: src/rules.c:272 +msgid "_Quit" +msgstr "_Kilépés" + #: src/rules.c:273 msgid "_Play Again" msgstr "Új já_ték" -#~ msgid "UI file “%s” could not be loaded" -#~ msgstr "A(z) „%s” felületfájl nem tölthető be" - -#~ msgid "_Game" -#~ msgstr "_Játék" - -#~ msgid "_Hint" -#~ msgstr "_Tipp" - -#~ msgid "_Undo" -#~ msgstr "_Visszavonás" - -#~ msgid "_Redo" -#~ msgstr "Új_ra" - -#~ msgid "" -#~ "Hitori is free software: you can redistribute it and/or modify it under " -#~ "the terms of the GNU General Public License as published by the Free " -#~ "Software Foundation, either version 3 of the License, or (at your option) " -#~ "any later version." -#~ msgstr "" -#~ "A Hitori szabad szoftver, terjesztheti és/vagy módosíthatja a Free " -#~ "Software Foundation által kiadott GNU General Public License második " -#~ "(vagy bármely későbbi) változatában foglaltak alapján" - -#~ msgid "" -#~ "Hitori is distributed in the hope that it will be useful, but WITHOUT ANY " -#~ "WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS " -#~ "FOR A PARTICULAR PURPOSE. See the GNU General Public License for more " -#~ "details." -#~ msgstr "" -#~ "A Hitori programot abban a reményben terjesztjük, hogy hasznos lesz, de " -#~ "nem vállalunk SEMMIFÉLE GARANCIÁT, még olyan értelemben sem, hogy a " -#~ "program alkalmas-e a KÖZREADÁSRA vagy EGY BIZONYOS FELADAT ELVÉGZÉSÉRE. " -#~ "További részletekért tanulmányozza a GNU GPL licencet." - -#~ msgid "" -#~ "You should have received a copy of the GNU General Public License along " -#~ "with Hitori. If not, see ." -#~ msgstr "" -#~ "A Hitori programhoz a GNU General Public License egy példánya is jár, ha " -#~ "nem kapta meg, itt elolvashatja: ." - -#~ msgid "Time: %02u:%02u" -#~ msgstr "Idő: %02u:%02u" - -#~ msgid "_Settings" -#~ msgstr "_Beállítások" Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/id.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/id.gmo differ diff -Nru hitori-3.22.4/po/id.po hitori-3.31.0/po/id.po --- hitori-3.22.4/po/id.po 2017-10-02 08:11:27.000000000 +0000 +++ hitori-3.31.0/po/id.po 2019-02-19 16:41:30.000000000 +0000 @@ -7,20 +7,19 @@ msgid "" msgstr "" "Project-Id-Version: hitori master\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2017-01-15 17:46+0700\n" -"Last-Translator: Kukuh Syafaat \n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2019-01-04 12:14+0000\n" +"PO-Revision-Date: 2019-01-05 21:23+0700\n" +"Last-Translator: Kukuh Syafaat \n" "Language-Team: INDONESIA \n" "Language: id\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Poedit 1.8.11\n" +"Plural-Forms: nplurals=2; plural= n!=1;\n" +"X-Generator: Poedit 2.0.6\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -29,10 +28,12 @@ msgid "Play the Hitori puzzle game" msgstr "Mainkan permainan menyusun gambar Hitori" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "teka teki;permainan;logic;grid;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -60,59 +61,59 @@ "mencari solusi. Bila Anda menemui jalan buntu, permainan bisa memberi Anda " "petunjuk." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "Proyek GNOME" + +#: data/hitori.ui:9 src/main.c:315 msgid "_New Game" msgstr "Permaina_n Baru" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "_Ukuran Papan" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "_Bantuan" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "Tent_ang" - -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "_Keluar" +#: data/hitori.ui:56 +msgid "_About Hitori" +msgstr "Tent_ang Hitori" -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Batalkan langkah terakhir Anda" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Ulangi langkah" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Dapatkan petunjuk untuk langkah berikutnya" @@ -124,63 +125,75 @@ msgid "The size of the board, in cells." msgstr "Ukuran papan, dalam sel." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "Isi bantuan tidak dapat ditampilkan" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Hak Cipta © 2007–2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Teka-teki logika yang dirancang oleh Nikoli" -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "" "Imam Musthaqim , 2009\n" "Andika Triwidada , 2012, 2014\n" -"Kukuh Syafaat , 2017." +"Kukuh Syafaat , 2017, 2018, 2019." -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Situs Web Hitori" -#: src/main.c:209 +#: src/main.c:219 msgid "Enable debug mode" msgstr "Aktifkan mode perunutan" -#: src/main.c:211 +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board +#: src/main.c:221 msgid "Seed the board generation" msgstr "Tentukan sumber untuk pembuatan papan" -#: src/main.c:225 +#. Options +#: src/main.c:235 msgid "- Play a game of Hitori" msgstr "- Mainkan Hitori" -#: src/main.c:235 +#. Print an error +#: src/main.c:245 #, c-format msgid "Command line options could not be parsed: %s\n" msgstr "Opsi baris-perintah tidak dapat diurai: %s\n" -#: src/main.c:301 +#: src/main.c:311 msgid "Do you want to stop the current game?" msgstr "Anda ingin menghentikan permainan saat ini?" -#: src/main.c:304 +#: src/main.c:314 msgid "Keep _Playing" msgstr "Tetap _Bermain" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Anda menang dalam waktu %02u:%02u!" +#: src/rules.c:272 +msgid "_Quit" +msgstr "_Keluar" + #: src/rules.c:273 msgid "_Play Again" msgstr "M_ain Lagi" +#~ msgid "_About" +#~ msgstr "Tent_ang" + #~ msgid "UI file “%s” could not be loaded" #~ msgstr "Berkas UI \"%s\" tidak dapat dimuat" diff -Nru hitori-3.22.4/po/insert-header.sin hitori-3.31.0/po/insert-header.sin --- hitori-3.22.4/po/insert-header.sin 2017-10-02 08:07:41.000000000 +0000 +++ hitori-3.31.0/po/insert-header.sin 1970-01-01 00:00:00.000000000 +0000 @@ -1,23 +0,0 @@ -# Sed script that inserts the file called HEADER before the header entry. -# -# At each occurrence of a line starting with "msgid ", we execute the following -# commands. At the first occurrence, insert the file. At the following -# occurrences, do nothing. The distinction between the first and the following -# occurrences is achieved by looking at the hold space. -/^msgid /{ -x -# Test if the hold space is empty. -s/m/m/ -ta -# Yes it was empty. First occurrence. Read the file. -r HEADER -# Output the file's contents by reading the next line. But don't lose the -# current line while doing this. -g -N -bb -:a -# The hold space was nonempty. Following occurrences. Do nothing. -x -:b -} Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/it.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/it.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/ko.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/ko.gmo differ diff -Nru hitori-3.22.4/po/LINGUAS hitori-3.31.0/po/LINGUAS --- hitori-3.22.4/po/LINGUAS 2017-09-22 09:21:15.000000000 +0000 +++ hitori-3.31.0/po/LINGUAS 2019-02-19 16:41:30.000000000 +0000 @@ -22,6 +22,7 @@ fur gl he +hr hu id it Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/lt.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/lt.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/lv.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/lv.gmo differ diff -Nru hitori-3.22.4/po/Makefile.in.in hitori-3.31.0/po/Makefile.in.in --- hitori-3.22.4/po/Makefile.in.in 2017-10-02 08:07:41.000000000 +0000 +++ hitori-3.31.0/po/Makefile.in.in 1970-01-01 00:00:00.000000000 +0000 @@ -1,483 +0,0 @@ -# Makefile for PO directory in any package using GNU gettext. -# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper -# -# Copying and distribution of this file, with or without modification, -# are permitted in any medium without royalty provided the copyright -# notice and this notice are preserved. This file is offered as-is, -# without any warranty. -# -# Origin: gettext-0.19.8 -GETTEXT_MACRO_VERSION = 0.19 - -PACKAGE = @PACKAGE@ -VERSION = @VERSION@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ - -SED = @SED@ -SHELL = /bin/sh -@SET_MAKE@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ - -prefix = @prefix@ -exec_prefix = @exec_prefix@ -datarootdir = @datarootdir@ -datadir = @datadir@ -localedir = @localedir@ -gettextsrcdir = $(datadir)/gettext/po - -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ - -# We use $(mkdir_p). -# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as -# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, -# @install_sh@ does not start with $(SHELL), so we add it. -# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined -# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake -# versions, $(mkinstalldirs) and $(install_sh) are unused. -mkinstalldirs = $(SHELL) @install_sh@ -d -install_sh = $(SHELL) @install_sh@ -MKDIR_P = @MKDIR_P@ -mkdir_p = @mkdir_p@ - -# When building gettext-tools, we prefer to use the built programs -# rather than installed programs. However, we can't do that when we -# are cross compiling. -CROSS_COMPILING = @CROSS_COMPILING@ - -GMSGFMT_ = @GMSGFMT@ -GMSGFMT_no = @GMSGFMT@ -GMSGFMT_yes = @GMSGFMT_015@ -GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) -MSGFMT_ = @MSGFMT@ -MSGFMT_no = @MSGFMT@ -MSGFMT_yes = @MSGFMT_015@ -MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) -XGETTEXT_ = @XGETTEXT@ -XGETTEXT_no = @XGETTEXT@ -XGETTEXT_yes = @XGETTEXT_015@ -XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) -MSGMERGE = msgmerge -MSGMERGE_UPDATE = @MSGMERGE@ --update -MSGINIT = msginit -MSGCONV = msgconv -MSGFILTER = msgfilter - -POFILES = @POFILES@ -GMOFILES = @GMOFILES@ -UPDATEPOFILES = @UPDATEPOFILES@ -DUMMYPOFILES = @DUMMYPOFILES@ -DISTFILES.common = Makefile.in.in remove-potcdate.sin \ -$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) -DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ -$(POFILES) $(GMOFILES) \ -$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) - -POTFILES = \ - -CATALOGS = @CATALOGS@ - -POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot -POFILESDEPS_yes = $(POFILESDEPS_) -POFILESDEPS_no = -POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT)) - -DISTFILESDEPS_ = update-po -DISTFILESDEPS_yes = $(DISTFILESDEPS_) -DISTFILESDEPS_no = -DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO)) - -# Makevars gets inserted here. (Don't remove this line!) - -.SUFFIXES: -.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update - -.po.mo: - @echo "$(MSGFMT) -c -o $@ $<"; \ - $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ - -.po.gmo: - @lang=`echo $* | sed -e 's,.*/,,'`; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \ - cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo - -.sin.sed: - sed -e '/^#/d' $< > t-$@ - mv t-$@ $@ - - -all: all-@USE_NLS@ - -all-yes: stamp-po -all-no: - -# Ensure that the gettext macros and this Makefile.in.in are in sync. -CHECK_MACRO_VERSION = \ - test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \ - || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \ - exit 1; \ - } - -# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no -# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because -# we don't want to bother translators with empty POT files). We assume that -# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. -# In this case, stamp-po is a nop (i.e. a phony target). - -# stamp-po is a timestamp denoting the last time at which the CATALOGS have -# been loosely updated. Its purpose is that when a developer or translator -# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, -# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent -# invocations of "make" will do nothing. This timestamp would not be necessary -# if updating the $(CATALOGS) would always touch them; however, the rule for -# $(POFILES) has been designed to not touch files that don't need to be -# changed. -stamp-po: $(srcdir)/$(DOMAIN).pot - @$(CHECK_MACRO_VERSION) - test ! -f $(srcdir)/$(DOMAIN).pot || \ - test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) - @test ! -f $(srcdir)/$(DOMAIN).pot || { \ - echo "touch stamp-po" && \ - echo timestamp > stamp-poT && \ - mv stamp-poT stamp-po; \ - } - -# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', -# otherwise packages like GCC can not be built if only parts of the source -# have been downloaded. - -# This target rebuilds $(DOMAIN).pot; it is an expensive operation. -# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. -# The determination of whether the package xyz is a GNU one is based on the -# heuristic whether some file in the top level directory mentions "GNU xyz". -# If GNU 'find' is available, we avoid grepping through monster files. -$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed - package_gnu="$(PACKAGE_GNU)"; \ - test -n "$$package_gnu" || { \ - if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \ - LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f \ - -size -10000000c -exec grep 'GNU @PACKAGE@' \ - /dev/null '{}' ';' 2>/dev/null; \ - else \ - LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \ - fi; \ - } | grep -v 'libtool:' >/dev/null; then \ - package_gnu=yes; \ - else \ - package_gnu=no; \ - fi; \ - }; \ - if test "$$package_gnu" = "yes"; then \ - package_prefix='GNU '; \ - else \ - package_prefix=''; \ - fi; \ - if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ - msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ - else \ - msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ - fi; \ - case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - *) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --package-name="$${package_prefix}@PACKAGE@" \ - --package-version='@VERSION@' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - esac - test ! -f $(DOMAIN).po || { \ - if test -f $(srcdir)/$(DOMAIN).pot-header; then \ - sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \ - cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po; \ - rm -f $(DOMAIN).1po; \ - fi; \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ - sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ - if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ - else \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - else \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - } - -# This rule has no dependencies: we don't need to update $(DOMAIN).pot at -# every "make" invocation, only create it when it is missing. -# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. -$(srcdir)/$(DOMAIN).pot: - $(MAKE) $(DOMAIN).pot-update - -# This target rebuilds a PO file if $(DOMAIN).pot has changed. -# Note that a PO file is not touched if it doesn't need to be changed. -$(POFILES): $(POFILESDEPS) - @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ - if test -f "$(srcdir)/$${lang}.po"; then \ - test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \ - cd $(srcdir) \ - && { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ - $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \ - *) \ - $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \ - esac; \ - }; \ - else \ - $(MAKE) $${lang}.po-create; \ - fi - - -install: install-exec install-data -install-exec: -install-data: install-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - for file in $(DISTFILES.common) Makevars.template; do \ - $(INSTALL_DATA) $(srcdir)/$$file \ - $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - for file in Makevars; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -install-data-no: all -install-data-yes: all - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ - $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ - echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ - fi; \ - done; \ - done - -install-strip: install - -installdirs: installdirs-exec installdirs-data -installdirs-exec: -installdirs-data: installdirs-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - else \ - : ; \ - fi -installdirs-data-no: -installdirs-data-yes: - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - fi; \ - done; \ - done - -# Define this as empty until I found a useful application. -installcheck: - -uninstall: uninstall-exec uninstall-data -uninstall-exec: -uninstall-data: uninstall-data-@USE_NLS@ - if test "$(PACKAGE)" = "gettext-tools"; then \ - for file in $(DISTFILES.common) Makevars.template; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -uninstall-data-no: -uninstall-data-yes: - catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - done; \ - done - -check: all - -info dvi ps pdf html tags TAGS ctags CTAGS ID: - -mostlyclean: - rm -f remove-potcdate.sed - rm -f stamp-poT - rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po - rm -fr *.o - -clean: mostlyclean - -distclean: clean - rm -f Makefile Makefile.in POTFILES *.mo - -maintainer-clean: distclean - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - rm -f stamp-po $(GMOFILES) - -distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) -dist distdir: - test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS) - @$(MAKE) dist2 -# This is a separate target because 'update-po' must be executed before. -dist2: stamp-po $(DISTFILES) - dists="$(DISTFILES)"; \ - if test "$(PACKAGE)" = "gettext-tools"; then \ - dists="$$dists Makevars.template"; \ - fi; \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - dists="$$dists $(DOMAIN).pot stamp-po"; \ - fi; \ - if test -f $(srcdir)/ChangeLog; then \ - dists="$$dists ChangeLog"; \ - fi; \ - for i in 0 1 2 3 4 5 6 7 8 9; do \ - if test -f $(srcdir)/ChangeLog.$$i; then \ - dists="$$dists ChangeLog.$$i"; \ - fi; \ - done; \ - if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ - for file in $$dists; do \ - if test -f $$file; then \ - cp -p $$file $(distdir) || exit 1; \ - else \ - cp -p $(srcdir)/$$file $(distdir) || exit 1; \ - fi; \ - done - -update-po: Makefile - $(MAKE) $(DOMAIN).pot-update - test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) - $(MAKE) update-gmo - -# General rule for creating PO files. - -.nop.po-create: - @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ - echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ - exit 1 - -# General rule for updating PO files. - -.nop.po-update: - @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ - if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ - cd $(srcdir); \ - if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ - $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ - *) \ - $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ - esac; \ - }; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "msgmerge for $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -$(DUMMYPOFILES): - -update-gmo: Makefile $(GMOFILES) - @: - -# Recreate Makefile by invoking config.status. Explicitly invoke the shell, -# because execution permission bits may not work on the current file system. -# Use @SHELL@, which is the shell determined by autoconf for the use by its -# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient. -Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ - cd $(top_builddir) \ - && @SHELL@ ./config.status $(subdir)/$@.in po-directories - -force: - -# Tell versions [3.59,3.63) of GNU make not to export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru hitori-3.22.4/po/Makevars hitori-3.31.0/po/Makevars --- hitori-3.22.4/po/Makevars 2017-03-22 14:34:03.000000000 +0000 +++ hitori-3.31.0/po/Makevars 1970-01-01 00:00:00.000000000 +0000 @@ -1,71 +0,0 @@ -# Makefile variables for PO directory in any package using GNU gettext. - -# Usually the message domain is the same as the package name. -DOMAIN = $(PACKAGE) - -# These two variables depend on the location of this directory. -subdir = po -top_builddir = .. - -# These options get passed to xgettext. -XGETTEXT_OPTIONS = \ - --from-code=UTF-8 \ - --keyword=_ --flag=_:1:pass-c-format \ - --keyword=N_ --flag=N_:1:pass-c-format \ - --flag=g_log:3:c-format --flag=g_logv:3:c-format \ - --flag=g_error:1:c-format --flag=g_message:1:c-format \ - --flag=g_critical:1:c-format --flag=g_warning:1:c-format \ - --flag=g_print:1:c-format \ - --flag=g_printerr:1:c-format \ - --flag=g_strdup_printf:1:c-format --flag=g_strdup_vprintf:1:c-format \ - --flag=g_printf_string_upper_bound:1:c-format \ - --flag=g_snprintf:3:c-format --flag=g_vsnprintf:3:c-format \ - --flag=g_string_sprintf:2:c-format \ - --flag=g_string_sprintfa:2:c-format \ - --flag=g_scanner_error:2:c-format \ - --flag=g_scanner_warn:2:c-format - -# Don’t rebuild .po files all the time -PO_DEPENDS_ON_POT = no - -# This is the copyright holder that gets inserted into the header of the -# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding -# package. (Note that the msgstr strings, extracted from the package's -# sources, belong to the copyright holder of the package.) Translators are -# expected to transfer the copyright for their translations to this person -# or entity, or to disclaim their copyright. The empty string stands for -# the public domain; in this case the translators are expected to disclaim -# their copyright. -COPYRIGHT_HOLDER = $(PACKAGE_STRING) authors - -# This is the email address or URL to which the translators shall report -# bugs in the untranslated strings: -# - Strings which are not entire sentences, see the maintainer guidelines -# in the GNU gettext documentation, section 'Preparing Strings'. -# - Strings which use unclear terms or require additional context to be -# understood. -# - Strings which make invalid assumptions about notation of date, time or -# money. -# - Pluralisation problems. -# - Incorrect English spelling. -# - Incorrect formatting. -# It can be your email address, or a mailing list address where translators -# can write to without being subscribed, or the URL of a web page through -# which the translators can contact you. -MSGID_BUGS_ADDRESS = $(PACKAGE_BUGREPORT) - -# This is the list of locale categories, beyond LC_MESSAGES, for which the -# message catalogs shall be used. It is usually empty. -EXTRA_LOCALE_CATEGORIES = - -# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt' -# context. Possible values are "yes" and "no". Set this to yes if the -# package uses functions taking also a message context, like pgettext(), or -# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument. -USE_MSGCTXT = no - -# These options get passed to msgmerge. -# Useful options are in particular: -# --previous to keep previous msgids of translated messages, -# --quiet to reduce the verbosity. -MSGMERGE_OPTIONS = --quiet diff -Nru hitori-3.22.4/po/meson.build hitori-3.31.0/po/meson.build --- hitori-3.22.4/po/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/po/meson.build 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1 @@ +i18n.gettext(meson.project_name(), preset: 'glib') Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/ml.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/ml.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/nb.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/nb.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/ne.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/ne.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/nl.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/nl.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/oc.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/oc.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/pa.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/pa.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/pl.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/pl.gmo differ diff -Nru hitori-3.22.4/po/pl.po hitori-3.31.0/po/pl.po --- hitori-3.22.4/po/pl.po 2017-10-02 08:11:27.000000000 +0000 +++ hitori-3.31.0/po/pl.po 2019-02-19 16:41:30.000000000 +0000 @@ -1,16 +1,15 @@ # Polish translation for hitori. -# Copyright © 2012-2017 the hitori authors. +# Copyright © 2012-2019 the hitori authors. # This file is distributed under the same license as the hitori package. -# Piotr Drąg , 2012-2017. -# Aviary.pl , 2012-2017. +# Piotr Drąg , 2012-2019. +# Aviary.pl , 2012-2019. # msgid "" msgstr "" "Project-Id-Version: hitori\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2017-08-31 01:21+0200\n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" +"PO-Revision-Date: 2019-02-03 18:12+0100\n" "Last-Translator: Piotr Drąg \n" "Language-Team: Polish \n" "Language: pl\n" @@ -20,7 +19,7 @@ "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 " "|| n%100>=20) ? 1 : 2);\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -29,10 +28,12 @@ msgid "Play the Hitori puzzle game" msgstr "Gra logiczna Hitori" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "puzzle;puzle;gra;logiczna;siatka;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -59,59 +60,59 @@ "planszy, a na komórkach można umieszczać znaczniki ułatwiające znalezienie " "rozwiązania. Gra może wyświetlić podpowiedź w razie utknięcia." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "Projekt GNOME" + +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "_Nowa gra" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "_Rozmiar planszy" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "Pomo_c" -#: data/hitori-menus.ui:55 -msgid "_About" +#: data/hitori.ui:56 +msgid "_About Hitori" msgstr "_O grze" -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "Za_kończ" - -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Cofa ostatni ruch" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Ponawia ruch" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Podpowiada następny ruch" @@ -123,25 +124,25 @@ msgid "The size of the board, in cells." msgstr "Rozmiar planszy w komórkach." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "Nie można wyświetlić treści pomocy" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Copyright © 2007-2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Logiczna układanka oryginalnie zaprojektowana przez firmę Nikoli." -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "" -"Piotr Drąg , 2012-2017\n" -"Aviary.pl , 2012-2017" +"Piotr Drąg , 2012-2019\n" +"Aviary.pl , 2012-2019" -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Witryna gry Hitori" @@ -149,14 +150,17 @@ msgid "Enable debug mode" msgstr "Włącza tryb debugowania" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Ziarno generowania planszy" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "— gra logiczna Hitori" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -170,11 +174,17 @@ msgid "Keep _Playing" msgstr "_Graj dalej" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Wygrano w czasie %02u∶%02u!" +#: src/rules.c:272 +msgid "_Quit" +msgstr "Za_kończ" + #: src/rules.c:273 msgid "_Play Again" msgstr "_Zagraj jeszcze raz" diff -Nru hitori-3.22.4/po/POTFILES.in hitori-3.31.0/po/POTFILES.in --- hitori-3.22.4/po/POTFILES.in 2017-03-22 14:34:03.000000000 +0000 +++ hitori-3.31.0/po/POTFILES.in 2019-02-19 16:41:30.000000000 +0000 @@ -1,7 +1,6 @@ # List of source files containing translatable strings. data/org.gnome.Hitori.desktop.in data/org.gnome.Hitori.appdata.xml.in -data/hitori-menus.ui data/hitori.ui data/org.gnome.hitori.gschema.xml src/interface.c Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/pt_BR.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/pt_BR.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/pt.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/pt.gmo differ diff -Nru hitori-3.22.4/po/quot.sed hitori-3.31.0/po/quot.sed --- hitori-3.22.4/po/quot.sed 2017-10-02 08:07:41.000000000 +0000 +++ hitori-3.31.0/po/quot.sed 1970-01-01 00:00:00.000000000 +0000 @@ -1,6 +0,0 @@ -s/"\([^"]*\)"/“\1”/g -s/`\([^`']*\)'/‘\1’/g -s/ '\([^`']*\)' / ‘\1’ /g -s/ '\([^`']*\)'$/ ‘\1’/g -s/^'\([^`']*\)' /‘\1’ /g -s/“”/""/g diff -Nru hitori-3.22.4/po/remove-potcdate.sin hitori-3.31.0/po/remove-potcdate.sin --- hitori-3.22.4/po/remove-potcdate.sin 2017-10-02 08:07:41.000000000 +0000 +++ hitori-3.31.0/po/remove-potcdate.sin 1970-01-01 00:00:00.000000000 +0000 @@ -1,19 +0,0 @@ -# Sed script that remove the POT-Creation-Date line in the header entry -# from a POT file. -# -# The distinction between the first and the following occurrences of the -# pattern is achieved by looking at the hold space. -/^"POT-Creation-Date: .*"$/{ -x -# Test if the hold space is empty. -s/P/P/ -ta -# Yes it was empty. First occurrence. Remove the line. -g -d -bb -:a -# The hold space was nonempty. Following occurrences. Do nothing. -x -:b -} Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/ro.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/ro.gmo differ diff -Nru hitori-3.22.4/po/ro.po hitori-3.31.0/po/ro.po --- hitori-3.22.4/po/ro.po 2017-10-02 08:11:27.000000000 +0000 +++ hitori-3.31.0/po/ro.po 2019-02-19 16:41:30.000000000 +0000 @@ -6,11 +6,11 @@ msgid "" msgstr "" "Project-Id-Version: hitori.master\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2012-02-11 22:02+0200\n" -"Last-Translator: Daniel Șerbănescu \n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" +"PO-Revision-Date: 2019-01-27 02:26+0200\n" +"Last-Translator: Florentina Mușat \n" "Language-Team: Echipa de traducere în limba română Gnome România \n" "Language: ro\n" @@ -19,36 +19,37 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < " "20)) ? 1 : 2);;\n" -"X-Generator: Virtaal 0.7.0\n" +"X-Generator: Poedit 2.2.1\n" "X-Project-Style: gnome\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" #. Translators: the brief summary of the application as it appears in a software center. #: data/org.gnome.Hitori.desktop.in:4 data/org.gnome.Hitori.appdata.xml.in:12 msgid "Play the Hitori puzzle game" -msgstr "Joacă puzzle-ul Hitori" +msgstr "Joacă jocul de puzzle Hitori" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" -msgstr "" +msgstr "puzzle;game;logic;grid;joc;logică;grilă;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" -msgstr "" +msgstr "org.gnome.Hitori" #. Translators: the name of the application as it appears in a software center #: data/org.gnome.Hitori.appdata.xml.in:9 -#, fuzzy msgid "GNOME Hitori" -msgstr "Hitori" +msgstr "Hitori GNOME" #. Translators: These are the application description paragraphs in the AppData file. #: data/org.gnome.Hitori.appdata.xml.in:16 msgid "Hitori is a logic game similar to the popular game of Sudoku." -msgstr "" +msgstr "Hitori este un joc de logică similar cu jocul popular Sudoku." #: data/org.gnome.Hitori.appdata.xml.in:17 msgid "" @@ -57,91 +58,95 @@ "board are supported, and you can place markers on cells to help work out the " "solution. If you get stuck, the game can give you a hint." msgstr "" +"Jucați jocul contra-timp, țintind spre eliminarea tuturor numerelor " +"duplicate pe fiecare linie și coloană în cel mai rapid timp. Sunt suportate " +"dimensiuni multiple ale tablei de joc, și puteți să plasați marcaje pe " +"celule pentru a ajuta în descoperirea soluției. Dacă vă blocați, jocul poate " +"să ofere un indiciu." + +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "Proiectul GNOME" -#: data/hitori-menus.ui:8 src/main.c:305 -#, fuzzy +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" -msgstr "_Joc" +msgstr "Joc _nou" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "_Dimensiunea tablei" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10x10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "_Ajutor" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "" +#: data/hitori.ui:56 +msgid "_About Hitori" +msgstr "_Despre Hitori" -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "" - -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" -msgstr "" +msgstr "Anulează ultima mutare" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" -msgstr "" +msgstr "Refă o mutare" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" -msgstr "" +msgstr "Obțineți un indiciu pentru mutarea următoare" #: data/org.gnome.hitori.gschema.xml:6 -#, fuzzy msgid "Board size" -msgstr "_Dimensiunea tablei" +msgstr "Dimensiunea tablei" #: data/org.gnome.hitori.gschema.xml:7 msgid "The size of the board, in cells." -msgstr "" +msgstr "Dimensiunea tablei, în celule." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" -msgstr "Textul de ajutor nu a putut fi afișat" +msgstr "Conținutul ajutorului nu a putut fi afișat" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Drepturi de autor © 2007–2010 Philip Withnall" -#: src/interface.c:674 -#, fuzzy +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" -msgstr "Un puzzle de logică conceput de Nikoli." +msgstr "Un puzzle de logică proiectat de Nikoli" -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" -msgstr "Cristian Buzdugă " +msgstr "" +"Cristian Buzdugă \n" +"Florentina Mușat , 2019" -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Pagina de internet Hitori" @@ -149,18 +154,21 @@ msgid "Enable debug mode" msgstr "Activează modul de depanare" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Cod de generare a tablei" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "- Porniți un joc de Hitori" +#. Print an error #: src/main.c:235 -#, fuzzy, c-format +#, c-format msgid "Command line options could not be parsed: %s\n" -msgstr "Opțiunile din linia de comandă nu au putut fi procesate" +msgstr "Opțiunile din linia de comandă nu au putut fi parsate: %s\n" #: src/main.c:301 msgid "Do you want to stop the current game?" @@ -168,16 +176,25 @@ #: src/main.c:304 msgid "Keep _Playing" -msgstr "" +msgstr "Continuați să _jucați" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 -#, fuzzy, c-format +#, c-format msgid "You’ve won in a time of %02u:%02u!" -msgstr "Ați câștigat cu timpul de %02u:%02u!" +msgstr "Ați câștigat într-un timp de %02u:%02u!" + +#: src/rules.c:272 +msgid "_Quit" +msgstr "_Ieșire" #: src/rules.c:273 msgid "_Play Again" -msgstr "" +msgstr "_Jucați din nou" + +#~ msgid "_About" +#~ msgstr "_Despre" #~ msgid "_Hint" #~ msgstr "_Indiciu" Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/ru.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/ru.gmo differ diff -Nru hitori-3.22.4/po/Rules-quot hitori-3.31.0/po/Rules-quot --- hitori-3.22.4/po/Rules-quot 2017-10-02 08:07:41.000000000 +0000 +++ hitori-3.31.0/po/Rules-quot 1970-01-01 00:00:00.000000000 +0000 @@ -1,58 +0,0 @@ -# This file, Rules-quot, can be copied and used freely without restrictions. -# Special Makefile rules for English message catalogs with quotation marks. - -DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot - -.SUFFIXES: .insert-header .po-update-en - -en@quot.po-create: - $(MAKE) en@quot.po-update -en@boldquot.po-create: - $(MAKE) en@boldquot.po-update - -en@quot.po-update: en@quot.po-update-en -en@boldquot.po-update: en@boldquot.po-update-en - -.insert-header.po-update-en: - @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ - if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - ll=`echo $$lang | sed -e 's/@.*//'`; \ - LC_ALL=C; export LC_ALL; \ - cd $(srcdir); \ - if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \ - | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \ - { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \ - $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \ - ;; \ - *) \ - $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \ - ;; \ - esac } 2>/dev/null > $$tmpdir/$$lang.new.po \ - ; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "creation of $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -en@quot.insert-header: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header - -en@boldquot.insert-header: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header - -mostlyclean: mostlyclean-quot -mostlyclean-quot: - rm -f *.insert-header Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/sk.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/sk.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/sl.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/sl.gmo differ diff -Nru hitori-3.22.4/po/sl.po hitori-3.31.0/po/sl.po --- hitori-3.22.4/po/sl.po 2017-10-02 08:11:27.000000000 +0000 +++ hitori-3.31.0/po/sl.po 2019-02-19 16:41:30.000000000 +0000 @@ -3,27 +3,26 @@ # This file is distributed under the same license as the hitori package. # # Andrej Žnidaršič , 2009–2010. -# Matej Urbančič , 2013–2017. +# Matej Urbančič , 2013–2019. # msgid "" msgstr "" "Project-Id-Version: hitori master\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2017-02-14 09:00+0100\n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2019-01-04 12:14+0000\n" +"PO-Revision-Date: 2019-01-25 18:26+0100\n" "Last-Translator: Matej Urbančič \n" "Language-Team: Slovenian GNOME Translation Team \n" -"Language: sl\n" +"Language: sl_SI\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=4; plural=(n%100==1 ? 1 : n%100==2 ? 2 : n%100==3 || n" "%100==4 ? 3 : 0);\n" "X-Poedit-SourceCharset: utf-8\n" -"X-Generator: Poedit 1.8.9\n" +"X-Generator: Poedit 2.1.1\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -32,10 +31,12 @@ msgid "Play the Hitori puzzle game" msgstr "Igraj miselno igro Hitori" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "sestavljanka;igra;logika;polja;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -62,59 +63,59 @@ "ravneh, program pa omogoča tudi označevanje celic za hitrejše reševanje. " "Podprti so tudi namigi za najtežje trenutke." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "Projekt GNOME" + +#: data/hitori.ui:9 src/main.c:315 msgid "_New Game" msgstr "_Nova Igra" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "_Velikost plošče" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "Pomo_č" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "_O programu" +#: data/hitori.ui:56 +msgid "_About Hitori" +msgstr "_O igri" -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "_Končaj" - -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Razveljavi zadnjo potezo" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Ponovi potezo" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Namig za naslednjo potezo" @@ -124,62 +125,76 @@ #: data/org.gnome.hitori.gschema.xml:7 msgid "The size of the board, in cells." -msgstr "Velikost igralne plošče v celicah" +msgstr "Velikost igralne plošče v celicah." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "Vsebine pomoči ni mogoče prikazati" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Avtorske pravice © 2007-2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Miselna igra, ki jo je zasnoval Nikoli. " -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" -msgstr "Andrej Žnidaršič, " +msgstr "" +"Matej Urbančič \n" +"Andrej Žnidaršič" -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Spletišče Hitori" -#: src/main.c:209 +#: src/main.c:219 msgid "Enable debug mode" msgstr "Omogoči razhroščevalni način" -#: src/main.c:211 +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board +#: src/main.c:221 msgid "Seed the board generation" msgstr "Seme za ustvarjanje plošče" -#: src/main.c:225 +#. Options +#: src/main.c:235 msgid "- Play a game of Hitori" msgstr "- Igrajte igro Hitori" -#: src/main.c:235 +#. Print an error +#: src/main.c:245 #, c-format msgid "Command line options could not be parsed: %s\n" msgstr "Možnosti ukazne vrstice ni mogoče razčleniti: %s\n" -#: src/main.c:301 +#: src/main.c:311 msgid "Do you want to stop the current game?" msgstr "Ali želite končati trenutno igro?" -#: src/main.c:304 +#: src/main.c:314 msgid "Keep _Playing" msgstr "Nadaljuj _igranje" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Zmagali ste s časom %02u:%02u!" +#: src/rules.c:272 +msgid "_Quit" +msgstr "_Končaj" + #: src/rules.c:273 msgid "_Play Again" msgstr "_Igraj znova" +#~ msgid "_About" +#~ msgstr "_O programu" + #~ msgid "UI file “%s” could not be loaded" #~ msgstr "Datoteke uporabniškega vmesnika “%s” ni bilo mogoče naložiti." Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/sr.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/sr.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/sr@latin.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/sr@latin.gmo differ diff -Nru hitori-3.22.4/po/stamp-po hitori-3.31.0/po/stamp-po --- hitori-3.22.4/po/stamp-po 2017-10-02 08:08:11.000000000 +0000 +++ hitori-3.31.0/po/stamp-po 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -timestamp Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/sv.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/sv.gmo differ diff -Nru hitori-3.22.4/po/sv.po hitori-3.31.0/po/sv.po --- hitori-3.22.4/po/sv.po 2017-10-02 08:11:27.000000000 +0000 +++ hitori-3.31.0/po/sv.po 2019-02-19 16:41:30.000000000 +0000 @@ -7,19 +7,18 @@ msgid "" msgstr "" "Project-Id-Version: hitori\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2016-12-25 22:31+0100\n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" +"PO-Revision-Date: 2018-12-28 11:53+0100\n" "Last-Translator: Anders Jonsson \n" "Language-Team: Swedish \n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Generator: Poedit 1.8.11\n" +"X-Generator: Poedit 2.2\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -28,10 +27,12 @@ msgid "Play the Hitori puzzle game" msgstr "Spela pusselspelet Hitori" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "pussel;spel;logik;rutnät;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -58,59 +59,59 @@ "stöds, och du kan placera markörer på celler som ett stöd för att finna " "lösningen. Om du kör fast kan spelet ge dig ett tips." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "GNOME-projektet" + +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "_Nytt spel" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "Bräd_storlek" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "_Hjälp" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "_Om" - -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "_Avsluta" +#: data/hitori.ui:56 +msgid "_About Hitori" +msgstr "_Om Hitori" -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Ångra ditt senaste drag" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Gör om ett drag" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Få ett tips angående ditt nästa drag" @@ -122,19 +123,19 @@ msgid "The size of the board, in cells." msgstr "Brädets storlek i celler." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "Hjälpinnehållet kunde inte visas" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Copyright © 2007–2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Ett logiskt pusselspel ursprungligen designat av Nikoli" -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "" "Daniel Nylander \n" @@ -143,7 +144,7 @@ "Skicka synpunkter på översättningen till\n" "." -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Webbplats för Hitori" @@ -151,14 +152,17 @@ msgid "Enable debug mode" msgstr "Aktivera felsökningsläget" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Välj frö för brädgenerering" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "- Spela en omgång av Hitori" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -172,14 +176,23 @@ msgid "Keep _Playing" msgstr "Fortsätt s_pela" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "Du vann på tiden %02u:%02u!" +#: src/rules.c:272 +msgid "_Quit" +msgstr "_Avsluta" + #: src/rules.c:273 msgid "_Play Again" msgstr "S_pela igen" +#~ msgid "_About" +#~ msgstr "_Om" + #~ msgid "UI file “%s” could not be loaded" #~ msgstr "Gränssnittsfilen ”%s” kunde inte läsas in" Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/tr.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/tr.gmo differ diff -Nru hitori-3.22.4/po/tr.po hitori-3.31.0/po/tr.po --- hitori-3.22.4/po/tr.po 2017-10-02 08:11:27.000000000 +0000 +++ hitori-3.31.0/po/tr.po 2019-02-19 16:41:30.000000000 +0000 @@ -7,21 +7,20 @@ msgid "" msgstr "" "Project-Id-Version: hitori master\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2017-08-13 18:56+0300\n" -"Last-Translator: Muhammet Kara \n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" +"PO-Revision-Date: 2019-01-08 06:04+0200\n" +"Last-Translator: Sabri Ünal \n" "Language-Team: Turkish \n" "Language: tr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Gtranslator 2.91.7\n" +"X-Generator: Poedit 2.0.6\n" "X-POOTLE-MTIME: 1415490997.000000\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" @@ -30,10 +29,12 @@ msgid "Play the Hitori puzzle game" msgstr "Hitori bulmaca oyununu oynayın" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "bulmaca;yapboz;oyun;mantık;ızgara;tablo;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -60,59 +61,59 @@ "desteklenir ve hücrelere çözümü bulmaya yardımcı işaretler koyabilirsiniz. " "Takıldığınız yerde oyun size ipucu verebilir." -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "GNOME Projesi" + +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "_Yeni Oyun" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "Tahta _Boyutu" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "_Yardım" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "_Hakkında" - -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "_Çık" +#: data/hitori.ui:56 +msgid "_About Hitori" +msgstr "Hitori _Hakkında" -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "Son hamleyi geri al" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "Hareketi yinele" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "Bir sonraki hamle için ipucu al" @@ -124,25 +125,25 @@ msgid "The size of the board, in cells." msgstr "Hücre cinsinden tahtanın boyutu." -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "Yardım içeriği gösterilemiyor" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "Telif Hakkı © 2007–2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "Nikoli tarafından tasarlanan bir mantık bulmacası" -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "" "Necdet Yücel \n" "Muhammet Kara " -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Hitori Web Sayfası" @@ -150,14 +151,17 @@ msgid "Enable debug mode" msgstr "Hata ayıklama kipini etkinleştir" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "Tahta oluşumu için bir başlatıcı girin" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "- Bir Hitori oyunu oyna" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -171,14 +175,23 @@ msgid "Keep _Playing" msgstr "Oynamaya _Devam Et" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "%02u dakika %02u saniye içinde kazandınız!" +#: src/rules.c:272 +msgid "_Quit" +msgstr "_Çık" + #: src/rules.c:273 msgid "_Play Again" msgstr "_Tekrar Oyna" +#~ msgid "_About" +#~ msgstr "_Hakkında" + #~ msgid "UI file “%s” could not be loaded" #~ msgstr "UI dosyası \"%s\" yüklenemedi" Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/uk.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/uk.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/vi.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/vi.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/zh_CN.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/zh_CN.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/zh_HK.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/zh_HK.gmo differ Binary files /tmp/tmpSocV_p/zlEjjaBEW6/hitori-3.22.4/po/zh_TW.gmo and /tmp/tmpSocV_p/5_15248x0F/hitori-3.31.0/po/zh_TW.gmo differ diff -Nru hitori-3.22.4/po/zh_TW.po hitori-3.31.0/po/zh_TW.po --- hitori-3.22.4/po/zh_TW.po 2017-10-02 08:11:27.000000000 +0000 +++ hitori-3.31.0/po/zh_TW.po 2019-02-19 16:41:30.000000000 +0000 @@ -1,36 +1,38 @@ # Chinese (Taiwan) translation for hitori. # Copyright (C) 2014 hitori's COPYRIGHT HOLDER # This file is distributed under the same license as the hitori package. -# FIRST AUTHOR , YEAR. # +# pan93412 , 2019. msgid "" msgstr "" "Project-Id-Version: hitori master\n" -"Report-Msgid-Bugs-To: https://bugzilla.gnome.org/enter_bug.cgi?" -"product=hitori\n" -"POT-Creation-Date: 2017-10-02 09:08+0100\n" -"PO-Revision-Date: 2017-02-28 13:53+0800\n" -"Last-Translator: Chao-Hsiung Liao \n" -"Language-Team: Chinese (Taiwan) \n" +"Report-Msgid-Bugs-To: https://gitlab.gnome.org/GNOME/hitori/issues\n" +"POT-Creation-Date: 2018-12-20 15:42+0000\n" +"PO-Revision-Date: 2019-02-17 23:15+0800\n" +"Last-Translator: pan93412 \n" +"Language-Team: Chinese \n" "Language: zh_TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Generator: Poedit 1.8.11\n" +"X-Generator: Lokalize 18.12.2\n" +"Plural-Forms: nplurals=1; plural=0;\n" -#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:12 src/main.c:101 +#: data/org.gnome.Hitori.desktop.in:3 data/hitori.ui:67 src/main.c:101 msgid "Hitori" msgstr "Hitori" #. Translators: the brief summary of the application as it appears in a software center. #: data/org.gnome.Hitori.desktop.in:4 data/org.gnome.Hitori.appdata.xml.in:12 msgid "Play the Hitori puzzle game" -msgstr "玩 Hitori 解謎遊戲" +msgstr "遊玩 Hitori 解謎遊戲" +#. Translators: Search terms to find this application. Do NOT translate or localise the semicolons! The list MUST also end with a semicolon! #: data/org.gnome.Hitori.desktop.in:6 msgid "puzzle;game;logic;grid;" msgstr "puzzle;game;logic;grid;益智遊戲;遊戲;邏輯;" +#. Translators: Do NOT translate or transliterate this text (this is an icon file name)! #: data/org.gnome.Hitori.desktop.in:9 msgid "org.gnome.Hitori" msgstr "org.gnome.Hitori" @@ -56,59 +58,60 @@ "盤支援多種尺寸，您可以在格子裡放上標記來協助找出解答。如果您卡關了，遊戲可以" "給您提示。" -#: data/hitori-menus.ui:8 src/main.c:305 +#: data/org.gnome.Hitori.appdata.xml.in:41 +msgid "The GNOME Project" +msgstr "GNOME 專案" + +#: data/hitori.ui:9 src/main.c:305 msgid "_New Game" msgstr "開新局(_N)" -#: data/hitori-menus.ui:12 +#: data/hitori.ui:13 msgid "Board _Size" msgstr "遊戲盤大小(_S)" -#: data/hitori-menus.ui:16 +#: data/hitori.ui:17 msgid "5×5" msgstr "5×5" -#: data/hitori-menus.ui:21 +#: data/hitori.ui:22 msgid "6×6" msgstr "6×6" -#: data/hitori-menus.ui:26 +#: data/hitori.ui:27 msgid "7×7" msgstr "7×7" -#: data/hitori-menus.ui:31 +#: data/hitori.ui:32 msgid "8×8" msgstr "8×8" -#: data/hitori-menus.ui:36 +#: data/hitori.ui:37 msgid "9×9" msgstr "9×9" -#: data/hitori-menus.ui:41 +#: data/hitori.ui:42 msgid "10×10" msgstr "10×10" -#: data/hitori-menus.ui:50 +#: data/hitori.ui:51 msgid "_Help" msgstr "求助(_H)" -#: data/hitori-menus.ui:55 -msgid "_About" -msgstr "關於(_A)" - -#: data/hitori-menus.ui:59 src/rules.c:272 -msgid "_Quit" -msgstr "離開(_Q)" +#: data/hitori.ui:56 +#| msgid "Hitori" +msgid "_About Hitori" +msgstr "關於 Hitori(_A)" -#: data/hitori.ui:29 +#: data/hitori.ui:84 msgid "Undo your last move" msgstr "還原上一步" -#: data/hitori.ui:51 +#: data/hitori.ui:106 msgid "Redo a move" msgstr "取消復原移動" -#: data/hitori.ui:75 +#: data/hitori.ui:152 msgid "Get a hint for your next move" msgstr "給下一步的提示" @@ -120,23 +123,23 @@ msgid "The size of the board, in cells." msgstr "遊戲盤大小，以格子計" -#: src/interface.c:649 +#: src/interface.c:640 msgid "The help contents could not be displayed" msgstr "無法顯示求助內容" -#: src/interface.c:673 +#: src/interface.c:664 msgid "Copyright © 2007–2010 Philip Withnall" msgstr "版權所有 © 2007–2010 Philip Withnall" -#: src/interface.c:674 +#: src/interface.c:665 msgid "A logic puzzle originally designed by Nikoli" msgstr "原始由 Nikoli 設計的邏輯解謎遊戲" -#: src/interface.c:676 +#: src/interface.c:667 msgid "translator-credits" msgstr "Chao-Hsiung Liao , 2014" -#: src/interface.c:680 +#: src/interface.c:671 msgid "Hitori Website" msgstr "Hitori 網站" @@ -144,14 +147,17 @@ msgid "Enable debug mode" msgstr "啟用除錯模式" +#. Translators: This means to choose a number as the "seed" for random number generation used when creating a board #: src/main.c:211 msgid "Seed the board generation" msgstr "遊戲盤產生亂數種子" +#. Options #: src/main.c:225 msgid "- Play a game of Hitori" msgstr "- 玩 Hitri 遊戲" +#. Print an error #: src/main.c:235 #, c-format msgid "Command line options could not be parsed: %s\n" @@ -165,15 +171,24 @@ msgid "Keep _Playing" msgstr "繼續玩(_P)" +#. Translators: The first parameter is the number of minutes which have elapsed since the start of the game; the second parameter is +#. * the number of seconds. #: src/rules.c:267 #, c-format msgid "You’ve won in a time of %02u:%02u!" msgstr "您已於 %02u:%02u 獲勝！" +#: src/rules.c:272 +msgid "_Quit" +msgstr "離開(_Q)" + #: src/rules.c:273 msgid "_Play Again" msgstr "再玩一次(_P)" +#~ msgid "_About" +#~ msgstr "關於(_A)" + #~ msgid "UI file “%s” could not be loaded" #~ msgstr "無法載入 UI 檔案「%s」" diff -Nru hitori-3.22.4/README hitori-3.31.0/README --- hitori-3.22.4/README 2016-12-20 13:30:40.000000000 +0000 +++ hitori-3.31.0/README 1970-01-01 00:00:00.000000000 +0000 @@ -1,57 +0,0 @@ -Hitori -====== - -Hitori is a GTK+ application to generate and let you play games of Hitori, a logic game similar to Sudoku created by Nikoli. - -News -==== - -See NEWS file. - -Dependencies -============ - -GNOME 3.0 development platform - http://www.gnome.org - -Controls -======== - -Left-click on a cell: - Paint/Unpaint cell -Ctrl+Left-click on a cell: - Tag cell -Shift+Left-click on a cell: - Tag cell -Ctrl+N: - New game -Ctrl+H: - Display a hint -Ctrl+Z: - Undo last move -Ctrl+Shift+Z: - Redo last undone move -Ctrl+Q: - Quit - -Copyright -========= - -Philip Withnall -Algorithm assistance from Ben Windsor -Icon by Jakub Szypulka - -BUGS -==== - -Bugs should be entered in GNOME Bugzilla: -http://bugzilla.gnome.org/enter_bug.cgi?product=hitori - -To get a better debug output, run: -# hitori --debug - -Contact -======= - -Philip Withnall -https://wiki.gnome.org/Apps/Hitori diff -Nru hitori-3.22.4/README.md hitori-3.31.0/README.md --- hitori-3.22.4/README.md 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/README.md 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1,50 @@ +Hitori +====== + +Hitori is a GTK+ application to generate and let you play games of Hitori, a logic game similar to Sudoku created by Nikoli. + +News +==== + +See NEWS file. + +Dependencies +============ + +[GNOME 3.0 development platform](http://www.gnome.org) + +Controls +======== + + * Left-click on a cell: Paint/Unpaint cell + * Ctrl+Left-click on a cell: Tag cell + * Shift+Left-click on a cell: Tag cell + * Ctrl+N: New game + * Ctrl+H: Display a hint + * Ctrl+Z: Undo last move + * Ctrl+Shift+Z: Redo last undone move + * Ctrl+Q: Quit + +Copyright +========= + + * Philip Withnall + * Algorithm assistance from Ben Windsor + * Icon by Jakub Szypulka + +BUGS +==== + +Bugs should be entered in [GNOME GitLab](https://gitlab.gnome.org/GNOME/hitori/issues). + +To get a better debug output, run: +``` +hitori --debug +``` + +Contact +======= + +Philip Withnall + +https://wiki.gnome.org/Apps/Hitori diff -Nru hitori-3.22.4/snap/snapcraft.yaml hitori-3.31.0/snap/snapcraft.yaml --- hitori-3.22.4/snap/snapcraft.yaml 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/snap/snapcraft.yaml 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1,90 @@ +name: gnome-hitori +version: git +summary: Play the Hitori puzzle game +description: | + Hitori is a logic game similar to the popular game of Sudoku. + + You play the game against the clock, aiming to eliminate all the duplicate + numbers in each row and column in the fastest time. + Multiple sizes of game board are supported, and you can place markers on + cells to help work out the solution. + If you get stuck, the game can give you a hint. + +grade: stable # must be 'stable' to release into candidate/stable channels +confinement: strict +base: core18 + +plugs: + gnome-3-28-1804: + interface: content + target: $SNAP/gnome-platform + default-provider: gnome-3-28-1804 + gtk-3-themes: + interface: content + target: $SNAP/data-dir/themes + default-provider: gtk-common-themes + icon-themes: + interface: content + target: $SNAP/data-dir/icons + default-provider: gtk-common-themes + +slots: + # for GtkApplication registration + gnome-hitori: + interface: dbus + bus: session + name: org.gnome.Hitori + +apps: + gnome-hitori: + command: desktop-launch hitori + common-id: org.gnome.Hitori + environment: + GSETTINGS_SCHEMA_DIR: $SNAP/share/glib-2.0/schemas + plugs: + - desktop + - desktop-legacy + - gsettings + - unity7 + - wayland + desktop: usr/share/applications/org.gnome.Hitori.desktop + environment: + GSETTINGS_SCHEMA_DIR: $SNAP/share/glib-2.0/schemas + +parts: + desktop-gnome-platform: + source: https://github.com/ubuntu/snapcraft-desktop-helpers.git + source-subdir: gtk + plugin: make + make-parameters: ["FLAVOR=gtk3"] + build-packages: + - build-essential + - libgtk-3-dev + override-build: | + snapcraftctl build + mkdir -pv $SNAPCRAFT_PART_INSTALL/gnome-platform + + gnome-hitori: + after: [desktop-gnome-platform] + source: https://gitlab.gnome.org/GNOME/hitori.git + source-type: git + plugin: autotools + # workaround the issue described in https://launchpad.net/bugs/1583250 + configflags: [--prefix=/snap/gnome-hitori/current/usr] + organize: + snap/gnome-hitori/current/usr: usr + override-build: | + sed -i.bak -e 's|=org.gnome.Hitori$|=${SNAP}/meta/gui/org.gnome.Hitori.png|g' data/org.gnome.Hitori.desktop.in + snapcraftctl build + mkdir -p $SNAPCRAFT_PART_INSTALL/meta/gui/ + cp ../src/data/icons/48x48/org.gnome.Hitori.png $SNAPCRAFT_PART_INSTALL/meta/gui/ + cp data/org.gnome.Hitori.desktop $SNAPCRAFT_PART_INSTALL/meta/gui/ + build-packages: + - appstream-util + - autoconf-archive + - desktop-file-utils + - gettext + - gsettings-desktop-schemas-dev + - libglib2.0-dev + - libgtk-3-dev + - yelp-tools diff -Nru hitori-3.22.4/src/generator.c hitori-3.31.0/src/generator.c --- hitori-3.22.4/src/generator.c 2016-12-20 13:30:40.000000000 +0000 +++ hitori-3.31.0/src/generator.c 2019-02-19 16:41:30.000000000 +0000 @@ -44,7 +44,7 @@ } if (hitori->debug) - g_debug ("Seed value: %u", seed); + g_debug ("Seed value: %d", seed); srand (seed); diff -Nru hitori-3.22.4/src/hitori.gresource.xml hitori-3.31.0/src/hitori.gresource.xml --- hitori-3.22.4/src/hitori.gresource.xml 2016-12-20 13:30:40.000000000 +0000 +++ hitori-3.31.0/src/hitori.gresource.xml 2019-02-19 16:41:30.000000000 +0000 @@ -4,7 +4,4 @@ ./data/hitori.ui ./data/hitori.css - - ./data/hitori-menus.ui - diff -Nru hitori-3.22.4/src/interface.c hitori-3.31.0/src/interface.c --- hitori-3.22.4/src/interface.c 2017-06-27 13:03:29.000000000 +0000 +++ hitori-3.31.0/src/interface.c 2019-02-19 16:41:30.000000000 +0000 @@ -2,7 +2,7 @@ /* * Hitori * Copyright (C) Philip Withnall 2007-2009 - * + * * Hitori is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or @@ -46,7 +46,6 @@ static void hint_cb (GSimpleAction *action, GVariant *parameter, gpointer user_data); static void undo_cb (GSimpleAction *action, GVariant *parameter, gpointer user_data); static void redo_cb (GSimpleAction *action, GVariant *parameter, gpointer user_data); -static void quit_cb (GSimpleAction *action, GVariant *parameter, gpointer user_data); static void help_cb (GSimpleAction *action, GVariant *parameter, gpointer user_data); static void about_cb (GSimpleAction *action, GVariant *parameter, gpointer user_data); static void board_size_change_cb (GObject *object, GParamSpec *pspec, gpointer user_data); @@ -55,7 +54,6 @@ { "new-game", new_game_cb, NULL, NULL, NULL }, { "about", about_cb, NULL, NULL, NULL }, { "help", help_cb, NULL, NULL, NULL }, - { "quit", quit_cb, NULL, NULL, NULL }, }; static GActionEntry win_entries[] = { @@ -134,7 +132,7 @@ } static void -draw_cell (Hitori *hitori, GtkStyleContext *style_context, cairo_t *cr, gfloat cell_size, gdouble x_pos, gdouble y_pos, +draw_cell (Hitori *hitori, GtkStyleContext *style_context, cairo_t *cr, gdouble cell_size, gdouble x_pos, gdouble y_pos, HitoriVector iter) { gchar *text; @@ -307,7 +305,7 @@ /* Draw a hint if applicable */ if (hitori->hint_status % 2 == 1) { - gfloat line_width = BORDER_LEFT * 2.5; + gdouble line_width = BORDER_LEFT * 2.5; GdkRGBA colour; lookup_color (style_context, "hint-border-color", &colour); gdk_cairo_set_source_rgba (cr, &colour); @@ -622,13 +620,6 @@ } static void -quit_cb (GSimpleAction *action, GVariant *parameters, gpointer user_data) -{ - HitoriApplication *self = HITORI_APPLICATION (user_data); - hitori_quit (self); -} - -static void help_cb (GSimpleAction *action, GVariant *parameters, gpointer user_data) { HitoriApplication *self = HITORI_APPLICATION (user_data); diff -Nru hitori-3.22.4/src/main.c hitori-3.31.0/src/main.c --- hitori-3.22.4/src/main.c 2017-03-22 14:34:03.000000000 +0000 +++ hitori-3.31.0/src/main.c 2019-02-19 16:41:30.000000000 +0000 @@ -35,18 +35,18 @@ static void activate (GApplication *application); static gint handle_command_line (GApplication *application, GApplicationCommandLine *command_line); -struct _HitoriApplicationPrivate { +typedef struct { /* Command line parameters. */ gboolean debug; gint seed; -}; +} HitoriApplicationPrivate; typedef enum { PROP_DEBUG = 1, PROP_SEED } HitoriProperty; -G_DEFINE_TYPE (HitoriApplication, hitori_application, GTK_TYPE_APPLICATION) +G_DEFINE_TYPE_WITH_PRIVATE (HitoriApplication, hitori_application, GTK_TYPE_APPLICATION) static void hitori_application_class_init (HitoriApplicationClass *klass) @@ -54,8 +54,6 @@ GObjectClass *gobject_class = G_OBJECT_CLASS (klass); GApplicationClass *gapplication_class = G_APPLICATION_CLASS (klass); - g_type_class_add_private (klass, sizeof (HitoriApplicationPrivate)); - gobject_class->constructed = constructed; gobject_class->get_property = get_property; gobject_class->set_property = set_property; @@ -80,10 +78,12 @@ static void hitori_application_init (HitoriApplication *self) { - self->priv = G_TYPE_INSTANCE_GET_PRIVATE (self, HITORI_TYPE_APPLICATION, HitoriApplicationPrivate); + HitoriApplicationPrivate *priv; + + priv = hitori_application_get_instance_private (self); - self->priv->debug = FALSE; - self->priv->seed = -1; + priv->debug = FALSE; + priv->seed = -1; } static void @@ -108,7 +108,9 @@ static void get_property (GObject *object, guint property_id, GValue *value, GParamSpec *pspec) { - HitoriApplicationPrivate *priv = HITORI_APPLICATION (object)->priv; + HitoriApplicationPrivate *priv; + + priv = hitori_application_get_instance_private (HITORI_APPLICATION (object)); switch (property_id) { case PROP_DEBUG: @@ -127,7 +129,9 @@ static void set_property (GObject *object, guint property_id, const GValue *value, GParamSpec *pspec) { - HitoriApplicationPrivate *priv = HITORI_APPLICATION (object)->priv; + HitoriApplicationPrivate *priv; + + priv = hitori_application_get_instance_private (HITORI_APPLICATION (object)); switch (property_id) { case PROP_DEBUG: @@ -146,8 +150,12 @@ static void debug_handler (const char *log_domain, GLogLevelFlags log_level, const char *message, HitoriApplication *self) { + HitoriApplicationPrivate *priv; + + priv = hitori_application_get_instance_private (self); + /* Only display debug messages if we've been run with --debug */ - if (self->priv->debug == TRUE) { + if (priv->debug == TRUE) { g_log_default_handler (log_domain, log_level, message, NULL); } } @@ -166,7 +174,9 @@ activate (GApplication *application) { HitoriApplication *self = HITORI_APPLICATION (application); - HitoriApplicationPrivate *priv = self->priv; + HitoriApplicationPrivate *priv; + + priv = hitori_application_get_instance_private (self); /* Create the interface. */ if (self->window == NULL) { @@ -199,7 +209,7 @@ static gint handle_command_line (GApplication *application, GApplicationCommandLine *command_line) { - HitoriApplicationPrivate *priv = HITORI_APPLICATION (application)->priv; + HitoriApplicationPrivate *priv = hitori_application_get_instance_private (HITORI_APPLICATION (application)); GOptionContext *context; GError *error = NULL; gchar **args, **argv; diff -Nru hitori-3.22.4/src/main.h hitori-3.31.0/src/main.h --- hitori-3.22.4/src/main.h 2017-03-22 14:34:03.000000000 +0000 +++ hitori-3.31.0/src/main.h 2019-02-19 16:41:30.000000000 +0000 @@ -2,7 +2,7 @@ /* * Hitori * Copyright (C) Philip Withnall 2007-2009 - * + * * Hitori is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or @@ -61,18 +61,11 @@ guchar status; } HitoriCell; -#define HITORI_TYPE_APPLICATION (hitori_application_get_type ()) -#define HITORI_APPLICATION(o) (G_TYPE_CHECK_INSTANCE_CAST ((o), HITORI_TYPE_APPLICATION, HitoriApplication)) -#define HITORI_APPLICATION_CLASS(k) (G_TYPE_CHECK_CLASS_CAST((k), HITORI_TYPE_APPLICATION, HitoriApplicationClass)) -#define HITORI_IS_APPLICATION(o) (G_TYPE_CHECK_INSTANCE_TYPE ((o), HITORI_TYPE_APPLICATION)) -#define HITORI_IS_APPLICATION_CLASS(k) (G_TYPE_CHECK_CLASS_TYPE ((k), HITORI_TYPE_APPLICATION)) -#define HITORI_APPLICATION_GET_CLASS(o) (G_TYPE_INSTANCE_GET_CLASS ((o), HITORI_TYPE_APPLICATION, HitoriApplicationClass)) - -typedef struct _HitoriApplicationPrivate HitoriApplicationPrivate; +#define HITORI_TYPE_APPLICATION (hitori_application_get_type ()) +G_DECLARE_FINAL_TYPE (HitoriApplication, hitori_application, HITORI, APPLICATION, GtkApplication) -typedef struct { +struct _HitoriApplication { GtkApplication parent; - HitoriApplicationPrivate *priv; /* FIXME: This should all be merged into priv. */ GtkWidget *window; @@ -107,13 +100,7 @@ guint timeout_id; GSettings *settings; -} HitoriApplication; - -typedef struct { - GtkApplicationClass parent; -} HitoriApplicationClass; - -GType hitori_application_get_type (void) G_GNUC_CONST; +}; HitoriApplication *hitori_application_new (void) G_GNUC_WARN_UNUSED_RESULT G_GNUC_MALLOC; diff -Nru hitori-3.22.4/src/meson.build hitori-3.31.0/src/meson.build --- hitori-3.22.4/src/meson.build 1970-01-01 00:00:00.000000000 +0000 +++ hitori-3.31.0/src/meson.build 2019-02-19 16:41:30.000000000 +0000 @@ -0,0 +1,40 @@ +sources = files( + 'generator.c', + 'interface.c', + 'main.c', + 'rules.c', +) + +if not cc.has_function('atexit') + error('atexit() needed for generated GResource files') +endif + +resources = gnome.compile_resources( + 'hitori-resources', + '@0@.gresource.xml'.format(meson.project_name()), + source_dir: meson.source_root(), +) + +config_header = configure_file( + output: 'config.h', + configuration: config_h, +) + +executable( + meson.project_name(), + sources + resources, + config_header, + dependencies: [ + glib_dependency, + gio_dependency, + gtk_dependency, + gmodule_dependency, + cairo_dependency + ], + install: true, + c_args: [ + '-DHAVE_CONFIG_H', + '-DGETTEXT_PACKAGE="@0@"'.format (meson.project_name()) + ], + install_dir: get_option('bindir'), +)