diff -Nru libantlr3c-3.2/aclocal.m4 libantlr3c-3.4+dfsg/aclocal.m4 --- libantlr3c-3.2/aclocal.m4 2009-12-11 22:55:06.000000000 +0000 +++ libantlr3c-3.4+dfsg/aclocal.m4 2011-07-19 18:14:24.000000000 +0000 @@ -1,7 +1,7 @@ -# generated automatically by aclocal 1.9.6 -*- Autoconf -*- +# generated automatically by aclocal 1.11.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005 Free Software Foundation, Inc. +# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -11,6406 +11,15 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.66],, +[m4_warning([this file was generated for autoconf 2.66. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically `autoreconf'.])]) -# serial 48 AC_PROG_LIBTOOL - - -# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) -# ----------------------------------------------------------- -# If this macro is not defined by Autoconf, define it here. -m4_ifdef([AC_PROVIDE_IFELSE], - [], - [m4_define([AC_PROVIDE_IFELSE], - [m4_ifdef([AC_PROVIDE_$1], - [$2], [$3])])]) - - -# AC_PROG_LIBTOOL -# --------------- -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl -dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX -dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. - AC_PROVIDE_IFELSE([AC_PROG_CXX], - [AC_LIBTOOL_CXX], - [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX - ])]) -dnl And a similar setup for Fortran 77 support - AC_PROVIDE_IFELSE([AC_PROG_F77], - [AC_LIBTOOL_F77], - [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 -])]) - -dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. -dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run -dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. - AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [ifdef([AC_PROG_GCJ], - [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([A][M_PROG_GCJ], - [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([LT_AC_PROG_GCJ], - [define([LT_AC_PROG_GCJ], - defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) -])])# AC_PROG_LIBTOOL - - -# _AC_PROG_LIBTOOL -# ---------------- -AC_DEFUN([_AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl -AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl -AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -])# _AC_PROG_LIBTOOL - - -# AC_LIBTOOL_SETUP -# ---------------- -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.50)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl - -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl - -AC_LIBTOOL_SYS_MAX_CMD_LEN -AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -AC_LIBTOOL_OBJDIR - -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -_LT_AC_PROG_ECHO_BACKSLASH - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] - -# Same as above, but do not quote variable references. -[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" - -AC_CHECK_TOOL(AR, ar, false) -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -_LT_CC_BASENAME([$compiler]) - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC - fi - ;; -esac - -AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) - -AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -AC_ARG_WITH([pic], - [AC_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) -test -z "$pic_mode" && pic_mode=default - -# Use C for the default configuration in the libtool script -tagname= -AC_LIBTOOL_LANG_C_CONFIG -_LT_AC_TAGCONFIG -])# AC_LIBTOOL_SETUP - - -# _LT_AC_SYS_COMPILER -# ------------------- -AC_DEFUN([_LT_AC_SYS_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_AC_SYS_COMPILER - - -# _LT_CC_BASENAME(CC) -# ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -AC_DEFUN([_LT_CC_BASENAME], -[for cc_temp in $1""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -]) - - -# _LT_COMPILER_BOILERPLATE -# ------------------------ -# Check for compiler boilerplate output or warnings with -# the simple compiler test code. -AC_DEFUN([_LT_COMPILER_BOILERPLATE], -[ac_outfile=conftest.$ac_objext -printf "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* -])# _LT_COMPILER_BOILERPLATE - - -# _LT_LINKER_BOILERPLATE -# ---------------------- -# Check for linker boilerplate output or warnings with -# the simple link test code. -AC_DEFUN([_LT_LINKER_BOILERPLATE], -[ac_outfile=conftest.$ac_objext -printf "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm conftest* -])# _LT_LINKER_BOILERPLATE - - -# _LT_AC_SYS_LIBPATH_AIX -# ---------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], -[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_AC_SYS_LIBPATH_AIX - - -# _LT_AC_SHELL_INIT(ARG) -# ---------------------- -AC_DEFUN([_LT_AC_SHELL_INIT], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -$1 -AC_DIVERT_POP -])# _LT_AC_SHELL_INIT - - -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[_LT_AC_SHELL_INIT([ -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null 2>&1 && unset CDPATH - -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string=`eval $cmd`) 2>/dev/null && - echo_test_string=`eval $cmd` && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(ECHO) -])])# _LT_AC_PROG_ECHO_BACKSLASH - - -# _LT_AC_LOCK -# ----------- -AC_DEFUN([_LT_AC_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) LD="${LD-ld} -64" ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; - ]) -esac - -need_locks="$enable_libtool_lock" - -])# _LT_AC_LOCK - - -# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], -[AC_REQUIRE([LT_AC_PROG_SED]) -AC_CACHE_CHECK([$1], [$2], - [$2=no - ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - fi - $rm conftest* -]) - -if test x"[$]$2" = xyes; then - ifelse([$5], , :, [$5]) -else - ifelse([$6], , :, [$6]) -fi -])# AC_LIBTOOL_COMPILER_OPTION - - -# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ------------------------------------------------------------ -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], -[AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - printf "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - else - $2=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - ifelse([$4], , :, [$4]) -else - ifelse([$5], , :, [$5]) -fi -])# AC_LIBTOOL_LINKER_OPTION - - -# AC_LIBTOOL_SYS_MAX_CMD_LEN -# -------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], -[# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ - = "XX$teststring") >/dev/null 2>&1 && - new_result=`expr "X$teststring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - teststring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -])# AC_LIBTOOL_SYS_MAX_CMD_LEN - - -# _LT_AC_CHECK_DLFCN -# ------------------ -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h)dnl -])# _LT_AC_CHECK_DLFCN - - -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# --------------------------------------------------------------------- -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - exit (status); -}] -EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_dlunknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF - - -# AC_LIBTOOL_DLOPEN_SELF -# ---------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -])# AC_LIBTOOL_DLOPEN_SELF - - -# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) -# --------------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler -AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . 2>&AS_MESSAGE_LOG_FD - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* -]) -])# AC_LIBTOOL_PROG_CC_C_O - - -# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) -# ----------------------------------------- -# Check to see if we can do hard links to lock some files if needed -AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], -[AC_REQUIRE([_LT_AC_LOCK])dnl - -hard_links="nottested" -if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS - - -# AC_LIBTOOL_OBJDIR -# ----------------- -AC_DEFUN([AC_LIBTOOL_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -])# AC_LIBTOOL_OBJDIR - - -# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) -# ---------------------------------------------- -# Check hardcoding attributes. -AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_AC_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ - test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ - test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then - - # We can hardcode non-existant directories. - if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_AC_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_AC_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_AC_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH - - -# AC_LIBTOOL_SYS_LIB_STRIP -# ------------------------ -AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], -[striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) -fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -])# AC_LIBTOOL_SYS_LIB_STRIP - - -# AC_LIBTOOL_SYS_DYNAMIC_LINKER -# ----------------------------- -# PORTME Fill in your ld.so characteristics -AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], -[AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[[45]]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. - if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[[123]]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[[01]]* | freebsdelf3.[[01]]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ - freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - freebsd*) # from 4.6 on - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix3*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # find out which ABI we are using - libsuff= - case "$host_cpu" in - x86_64*|s390x*|powerpc64*) - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; - esac - fi - rm -rf conftest* - ;; - esac - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -knetbsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi -])# AC_LIBTOOL_SYS_DYNAMIC_LINKER - - -# _LT_AC_TAGCONFIG -# ---------------- -AC_DEFUN([_LT_AC_TAGCONFIG], -[AC_ARG_WITH([tags], - [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], - [include additional configurations @<:@automatic@:>@])], - [tagnames="$withval"]) - -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - AC_MSG_WARN([output file `$ofile' does not exist]) - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) - else - AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) - fi - fi - if test -z "$LTCFLAGS"; then - eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" - fi - - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` - - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in - "") ;; - *) AC_MSG_ERROR([invalid tag name: $tagname]) - ;; - esac - - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - AC_MSG_ERROR([tag name \"$tagname\" already exists]) - fi - - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_LIBTOOL_LANG_CXX_CONFIG - else - tagname="" - fi - ;; - - F77) - if test -n "$F77" && test "X$F77" != "Xno"; then - AC_LIBTOOL_LANG_F77_CONFIG - else - tagname="" - fi - ;; - - GCJ) - if test -n "$GCJ" && test "X$GCJ" != "Xno"; then - AC_LIBTOOL_LANG_GCJ_CONFIG - else - tagname="" - fi - ;; - - RC) - AC_LIBTOOL_LANG_RC_CONFIG - ;; - - *) - AC_MSG_ERROR([Unsupported tag name: $tagname]) - ;; - esac - - # Append the new tag name to the list of available tags. - if test -n "$tagname" ; then - available_tags="$available_tags $tagname" - fi - fi - done - IFS="$lt_save_ifs" - - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" - else - rm -f "${ofile}T" - AC_MSG_ERROR([unable to update list of available tagged configurations.]) - fi -fi -])# _LT_AC_TAGCONFIG - - -# AC_LIBTOOL_DLOPEN -# ----------------- -# enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], - [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_DLOPEN - - -# AC_LIBTOOL_WIN32_DLL -# -------------------- -# declare package support for building win32 DLLs -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_WIN32_DLL - - -# AC_ENABLE_SHARED([DEFAULT]) -# --------------------------- -# implement the --enable-shared flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([shared], - [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]AC_ENABLE_SHARED_DEFAULT) -])# AC_ENABLE_SHARED - - -# AC_DISABLE_SHARED -# ----------------- -# set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no) -])# AC_DISABLE_SHARED - - -# AC_ENABLE_STATIC([DEFAULT]) -# --------------------------- -# implement the --enable-static flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([static], - [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]AC_ENABLE_STATIC_DEFAULT) -])# AC_ENABLE_STATIC - - -# AC_DISABLE_STATIC -# ----------------- -# set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no) -])# AC_DISABLE_STATIC - - -# AC_ENABLE_FAST_INSTALL([DEFAULT]) -# --------------------------------- -# implement the --enable-fast-install flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([fast-install], - [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) -])# AC_ENABLE_FAST_INSTALL - - -# AC_DISABLE_FAST_INSTALL -# ----------------------- -# set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no) -])# AC_DISABLE_FAST_INSTALL - - -# AC_LIBTOOL_PICMODE([MODE]) -# -------------------------- -# implement the --with-pic flag -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default) -])# AC_LIBTOOL_PICMODE - - -# AC_PROG_EGREP -# ------------- -# This is predefined starting with Autoconf 2.54, so this conditional -# definition can be removed once we require Autoconf 2.54 or later. -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], -[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], - [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi]) - EGREP=$ac_cv_prog_egrep - AC_SUBST([EGREP]) -])]) - - -# AC_PATH_TOOL_PREFIX -# ------------------- -# find a file program which can recognise shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -])# AC_PATH_TOOL_PREFIX - - -# AC_PATH_MAGIC -# ------------- -# find a file program which can recognise a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# AC_PATH_MAGIC - - -# AC_PROG_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH([gnu-ld], - [AC_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no]) -AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix3*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux*) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -nto-qnx*) - lt_cv_deplibs_check_method=unknown - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown -])# AC_DEPLIBS_CHECK_METHOD - - -# AC_PROG_NM -# ---------- -# find the pathname to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -])# AC_PROG_NM - - -# AC_CHECK_LIBM -# ------------- -# check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM="-lm") - ;; -esac -])# AC_CHECK_LIBM - - -# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl convenience library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that -# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, -# it is assumed to be `libltdl'. LIBLTDL will be prefixed with -# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' -# (note the single quotes!). If your package is not flat and you're not -# using automake, define top_builddir and top_srcdir appropriately in -# the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_CONVENIENCE - - -# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl installable library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that -# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, -# and an installed libltdl is not found, it is assumed to be `libltdl'. -# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and top_srcdir -# appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, lt_dlinit, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - LTDLINCL= - fi - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_INSTALLABLE - - -# AC_LIBTOOL_CXX -# -------------- -# enable support for C++ libraries -AC_DEFUN([AC_LIBTOOL_CXX], -[AC_REQUIRE([_LT_AC_LANG_CXX]) -])# AC_LIBTOOL_CXX - - -# _LT_AC_LANG_CXX -# --------------- -AC_DEFUN([_LT_AC_LANG_CXX], -[AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([_LT_AC_PROG_CXXCPP]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) -])# _LT_AC_LANG_CXX - -# _LT_AC_PROG_CXXCPP -# ------------------ -AC_DEFUN([_LT_AC_PROG_CXXCPP], -[ -AC_REQUIRE([AC_PROG_CXX]) -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_PROG_CXXCPP -fi -])# _LT_AC_PROG_CXXCPP - -# AC_LIBTOOL_F77 -# -------------- -# enable support for Fortran 77 libraries -AC_DEFUN([AC_LIBTOOL_F77], -[AC_REQUIRE([_LT_AC_LANG_F77]) -])# AC_LIBTOOL_F77 - - -# _LT_AC_LANG_F77 -# --------------- -AC_DEFUN([_LT_AC_LANG_F77], -[AC_REQUIRE([AC_PROG_F77]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) -])# _LT_AC_LANG_F77 - - -# AC_LIBTOOL_GCJ -# -------------- -# enable support for GCJ libraries -AC_DEFUN([AC_LIBTOOL_GCJ], -[AC_REQUIRE([_LT_AC_LANG_GCJ]) -])# AC_LIBTOOL_GCJ - - -# _LT_AC_LANG_GCJ -# --------------- -AC_DEFUN([_LT_AC_LANG_GCJ], -[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], - [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], - [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], - [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) -])# _LT_AC_LANG_GCJ - - -# AC_LIBTOOL_RC -# ------------- -# enable support for Windows resource files -AC_DEFUN([AC_LIBTOOL_RC], -[AC_REQUIRE([LT_AC_PROG_RC]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) -])# AC_LIBTOOL_RC - - -# AC_LIBTOOL_LANG_C_CONFIG -# ------------------------ -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) -AC_DEFUN([_LT_AC_LANG_C_CONFIG], -[lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;\n" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}\n' - -_LT_AC_SYS_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_DLOPEN_SELF - -# Report which library types will actually be built -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) - -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4* | aix5*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_C_CONFIG - - -# AC_LIBTOOL_LANG_CXX_CONFIG -# -------------------------- -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) -AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], -[AC_LANG_PUSH(C++) -AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([_LT_AC_PROG_CXXCPP]) - -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_AC_TAGVAR(allow_undefined_flag, $1)= -_LT_AC_TAGVAR(always_export_symbols, $1)=no -_LT_AC_TAGVAR(archive_expsym_cmds, $1)= -_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_direct, $1)=no -_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= -_LT_AC_TAGVAR(hardcode_minus_L, $1)=no -_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -_LT_AC_TAGVAR(hardcode_automatic, $1)=no -_LT_AC_TAGVAR(module_cmds, $1)= -_LT_AC_TAGVAR(module_expsym_cmds, $1)= -_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown -_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_AC_TAGVAR(no_undefined_flag, $1)= -_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= -_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Dependencies to place before and after the object being linked: -_LT_AC_TAGVAR(predep_objects, $1)= -_LT_AC_TAGVAR(postdep_objects, $1)= -_LT_AC_TAGVAR(predeps, $1)= -_LT_AC_TAGVAR(postdeps, $1)= -_LT_AC_TAGVAR(compiler_lib_search_path, $1)= - -# Source file extension for C++ test sources. -ac_ext=cpp - -# Object file extension for compiled C++ test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;\n" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_LD=$LD -lt_save_GCC=$GCC -GCC=$GXX -lt_save_with_gnu_ld=$with_gnu_ld -lt_save_path_LD=$lt_cv_path_LD -if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx -else - $as_unset lt_cv_prog_gnu_ld -fi -if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX -else - $as_unset lt_cv_path_LD -fi -test -z "${LDCXX+set}" || LD=$LDCXX -CC=${CXX-"c++"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) - -# We don't want -fno-exception wen compiling C++ code, so set the -# no_builtin_flag separately -if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -else - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -fi - -if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - AC_PROG_LD - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - -else - GXX=no - with_gnu_ld=no - wlarc= -fi - -# PORTME: fill in a description of your system's C++ link characteristics -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -_LT_AC_TAGVAR(ld_shlibs, $1)=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GXX" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GXX" = yes ; then - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - fi - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi - ;; - - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - freebsd[[12]]*) - # C++ shared libraries reported to be fairly broken before switch to ELF - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - freebsd-elf*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - freebsd* | kfreebsd*-gnu | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - ;; - gnu*) - ;; - hpux9*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - ;; - *) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - interix3*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' - fi - fi - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - linux*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc*) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC*) - # Portland Group C++ compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - m88k*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - openbsd2*) - # C++ shared libraries are fairly broken - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - openbsd*) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd='echo' - ;; - osf3*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ - $rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The C++ compiler is used as linker so we must use $wl - # flag to pass the commands to the underlying system - # linker. We must also pass each convience library through - # to the system linker between allextract/defaultextract. - # The C++ compiler will combine linker options so we - # cannot just pass the convience library names through - # without $wl. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' - ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | grep -v '^2\.7' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - fi - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - fi - ;; - esac - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - # So that behaviour is only enabled if SCOABSPATH is set to a - # non-empty value in the environment. Most likely only useful for - # creating official distributions of packages. - # This is a hack until libtool officially supports absolute path - # names for shared libraries. - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; -esac -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -_LT_AC_TAGVAR(GCC, $1)="$GXX" -_LT_AC_TAGVAR(LD, $1)="$LD" - -AC_LIBTOOL_POSTDEP_PREDEP($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC=$lt_save_CC -LDCXX=$LD -LD=$lt_save_LD -GCC=$lt_save_GCC -with_gnu_ldcxx=$with_gnu_ld -with_gnu_ld=$lt_save_with_gnu_ld -lt_cv_path_LDCXX=$lt_cv_path_LD -lt_cv_path_LD=$lt_save_path_LD -lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld -lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -])# AC_LIBTOOL_LANG_CXX_CONFIG - -# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) -# ------------------------------------ -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <> "$cfgfile" -ifelse([$1], [], -[#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e 1s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# The names of the tagged configurations supported by this script. -available_tags= - -# ### BEGIN LIBTOOL CONFIG], -[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS - -# A language-specific compiler. -CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) - -# Is the compiler the GNU C compiler? -with_gcc=$_LT_AC_TAGVAR(GCC, $1) - -gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\` -gcc_ver=\`gcc -dumpversion\` - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_[]_LT_AC_TAGVAR(LD, $1) - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$lt_STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) - -# Commands used to build and install a shared archive. -archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) -archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) -module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=\`echo $lt_[]_LT_AC_TAGVAR(predep_objects, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=\`echo $lt_[]_LT_AC_TAGVAR(postdep_objects, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=\`echo $lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) - -# Compile-time system search path for libraries -sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" - -# Set to yes if exported symbols are required. -always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) - -# The commands to list exported symbols. -export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) - -# Symbols that must always be exported. -include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) - -ifelse([$1],[], -[# ### END LIBTOOL CONFIG], -[# ### END LIBTOOL TAG CONFIG: $tagname]) - -__EOF__ - -ifelse([$1],[], [ - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -]) -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi -])# AC_LIBTOOL_CONFIG - - -# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl - -_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - - AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI - - -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -linux*) - if test "$host_cpu" = ia64; then - symcode='[[ABCDGIRSTW]]' - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - fi - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris*) - symcode='[[BDRT]]' - ;; -sco3.2v5*) - symcode='[[DT]]' - ;; -sysv4.2uw2*) - symcode='[[DT]]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[[ABDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGIRSTW]]' ;; -esac - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if grep ' nm_test_var$' "$nlist" >/dev/null; then - if grep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[[]] = -{ -EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE - - -# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) -# --------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], -[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= - -AC_MSG_CHECKING([for $compiler option to produce PIC]) - ifelse([$1],[CXX],[ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | os2* | pw32*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - interix3*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix4* | aix5*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | kfreebsd*-gnu | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux*) - case $cc_basename in - KCC*) - # KAI C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - icpc* | ecpc*) - # Intel C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgCC*) - # Portland Group C++ compiler. - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx*) - # Digital/Compaq C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc*) - # Lucid - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - vxworks*) - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - interix3*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - esac - ;; - - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - newsos6) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - linux*) - case $cc_basename in - icc* | ecc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - ccc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - esac - ;; - - osf3* | osf4* | osf5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; - *) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; - esac - ;; - - sunos4*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - unicos*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - - uts4*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then - AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), - [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" - ;; -esac - -# -# Check to make sure the static flag actually works. -# -wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" -AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], - _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), - $lt_tmp_static_flag, - [], - [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) -]) - - -# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) -# ------------------------------------ -# See if the linker supports building shared libraries. -AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], -[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -ifelse([$1],[CXX],[ - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix4* | aix5*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - cygwin* | mingw*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' - ;; - *) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -],[ - runpath_var= - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)= - _LT_AC_TAGVAR(archive_expsym_cmds, $1)= - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown - _LT_AC_TAGVAR(hardcode_automatic, $1)=no - _LT_AC_TAGVAR(module_cmds, $1)= - _LT_AC_TAGVAR(module_expsym_cmds, $1)= - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_AC_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - _LT_CC_BASENAME([$compiler]) - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - interix3*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test $supports_anon_versioning = yes; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - sunos4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then - runpath_var= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - # see comment about different semantics on the GNU ld section - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - bsdi[[45]]*) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' - _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi - ;; - - dgux*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - freebsd1*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu | dragonfly*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - openbsd*) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - solaris*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine linker options so we - # cannot just pass the convience library names through - # without $wl, iff we do not link with $LD. - # Luckily, gcc supports the same syntax we need for Sun Studio. - # Supported since Solaris 2.6 (maybe 2.5.1?) - case $wlarc in - '') - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; - *) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; - esac ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - case $host_vendor in - sni) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -# -# Do we need to explicitly link libc? -# -case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_AC_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $rm conftest* - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - else - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) - ;; - esac - fi - ;; -esac -])# AC_LIBTOOL_PROG_LD_SHLIBS - - -# _LT_AC_FILE_LTDLL_C -# ------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ -])# _LT_AC_FILE_LTDLL_C - - -# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) -# --------------------------------- -AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) - - -# old names -AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) -AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) -AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) - -# This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL]) - -AC_DEFUN([LT_AC_PROG_GCJ], -[AC_CHECK_TOOL(GCJ, gcj, no) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS) -]) - -AC_DEFUN([LT_AC_PROG_RC], -[AC_CHECK_TOOL(RC, windres, no) -]) - -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -# LT_AC_PROG_SED -# -------------- -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -AC_DEFUN([LT_AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_SUBST([SED]) -AC_MSG_RESULT([$SED]) -]) - -# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -6420,14 +29,31 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.11' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.11.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- -# Call AM_AUTOMAKE_VERSION so it can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.9.6])]) +[AM_AUTOMAKE_VERSION([1.11.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- @@ -6484,14 +110,14 @@ # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 7 +# serial 9 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- @@ -6500,8 +126,11 @@ [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE]) -AC_SUBST([$1_FALSE]) +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' @@ -6515,15 +144,14 @@ Usually this means the macro was only invoked conditionally.]]) fi])]) - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 8 +# serial 10 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, @@ -6551,6 +179,7 @@ ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], UPC, [depcc="$UPC" am_compiler_list=], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) @@ -6579,6 +208,16 @@ if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and @@ -6596,7 +235,17 @@ done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested @@ -6606,18 +255,23 @@ break fi ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; none) break ;; esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message @@ -6668,61 +322,74 @@ AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -#serial 3 +#serial 5 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" +[{ + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done done -done +} ])# _AM_OUTPUT_DEPENDENCY_COMMANDS @@ -6741,14 +408,14 @@ # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 12 +# serial 16 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. @@ -6765,16 +432,20 @@ # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.58])dnl +[AC_PREREQ([2.62])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi fi # test whether we have cygpath @@ -6794,6 +465,9 @@ AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl @@ -6809,8 +483,8 @@ AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. @@ -6818,19 +492,36 @@ AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -]) -]) + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +]) +_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl +dnl The `parallel-tests' driver may need to know about EXEEXT, so add the +dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro +dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl +]) + +dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. @@ -6842,18 +533,19 @@ # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. +_am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in - $1 | $1:* ) + $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done -echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -6864,7 +556,14 @@ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"$am_aux_dir/install-sh"} +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. @@ -6891,27 +590,38 @@ # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering -# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 +# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 4 +# serial 5 +# AM_MAINTAINER_MODE([DEFAULT-MODE]) +# ---------------------------------- +# Control maintainer-specific portions of Makefiles. +# Default is to disable them, unless `enable' is passed literally. +# For symmetry, `disable' may be passed as well. Anyway, the user +# can override the default with the --enable/--disable switch. AC_DEFUN([AM_MAINTAINER_MODE], -[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode is disabled by default - AC_ARG_ENABLE(maintainer-mode, -[ --enable-maintainer-mode enable make rules and dependencies not useful +[m4_case(m4_default([$1], [disable]), + [enable], [m4_define([am_maintainer_other], [disable])], + [disable], [m4_define([am_maintainer_other], [enable])], + [m4_define([am_maintainer_other], [enable]) + m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) +AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles]) + dnl maintainer-mode's default is 'disable' unless 'enable' is passed + AC_ARG_ENABLE([maintainer-mode], +[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful (and sometimes confusing) to the casual installer], - USE_MAINTAINER_MODE=$enableval, - USE_MAINTAINER_MODE=no) + [USE_MAINTAINER_MODE=$enableval], + [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) AC_MSG_RESULT([$USE_MAINTAINER_MODE]) - AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) + AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST(MAINT)dnl + AC_SUBST([MAINT])dnl ] ) @@ -6919,13 +629,13 @@ # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 3 +# serial 4 # AM_MAKE_INCLUDE() # ----------------- @@ -6934,7 +644,7 @@ [am_make=${MAKE-make} cat > confinc << 'END' am__doit: - @echo done + @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. @@ -6944,24 +654,24 @@ _am_result=none # First try GNU make style include. echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) @@ -6971,14 +681,14 @@ # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 4 +# serial 6 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ @@ -6994,7 +704,15 @@ # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " @@ -7004,7 +722,7 @@ fi ]) -# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. +# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -7012,70 +730,33 @@ # AM_PROG_MKDIR_P # --------------- -# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. -# -# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories -# created by `make install' are always world readable, even if the -# installer happens to have an overly restrictive umask (e.g. 077). -# This was a mistake. There are at least two reasons why we must not -# use `-m 0755': -# - it causes special bits like SGID to be ignored, -# - it may be too restrictive (some setups expect 775 directories). -# -# Do not use -m 0755 and let people choose whatever they expect by -# setting umask. -# -# We cannot accept any implementation of `mkdir' that recognizes `-p'. -# Some implementations (such as Solaris 8's) are not thread-safe: if a -# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' -# concurrently, both version can detect that a/ is missing, but only -# one can create it and the other will error out. Consequently we -# restrict ourselves to GNU make (using the --version option ensures -# this.) +# Check for `mkdir -p'. AC_DEFUN([AM_PROG_MKDIR_P], -[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' - else - mkdir_p='$(install_sh) -d' - fi -fi -AC_SUBST([mkdir_p])]) +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 3 +# serial 4 # _AM_MANGLE_OPTION(NAME) # ----------------------- @@ -7092,7 +773,7 @@ # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- @@ -7102,14 +783,14 @@ # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 4 +# serial 5 # AM_SANITY_CHECK # --------------- @@ -7118,16 +799,29 @@ # Just in case sleep 1 echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; +esac + # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` + set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ @@ -7177,9 +871,28 @@ if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# Copyright (C) 2006, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. @@ -7276,3 +989,8 @@ AC_SUBST([am__untar]) ]) # _AM_PROG_TAR +m4_include([m4/libtool.m4]) +m4_include([m4/ltoptions.m4]) +m4_include([m4/ltsugar.m4]) +m4_include([m4/ltversion.m4]) +m4_include([m4/lt~obsolete.m4]) diff -Nru libantlr3c-3.2/antlr3config.h libantlr3c-3.4+dfsg/antlr3config.h --- libantlr3c-3.2/antlr3config.h 2009-09-23 20:50:45.000000000 +0000 +++ libantlr3c-3.4+dfsg/antlr3config.h 2011-07-19 18:14:54.000000000 +0000 @@ -88,6 +88,10 @@ /* Define to 1 if you have the header file. */ #define HAVE_UNISTD_H 1 +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#define LT_OBJDIR ".libs/" + /* Name of package */ #define PACKAGE "libantlr3c" @@ -98,19 +102,22 @@ #define PACKAGE_NAME "libantlr3c" /* Define to the full name and version of this package. */ -#define PACKAGE_STRING "libantlr3c 3.2" +#define PACKAGE_STRING "libantlr3c 3.4" /* Define to the one symbol short name of this package. */ #define PACKAGE_TARNAME "libantlr3c" +/* Define to the home page for this package. */ +#define PACKAGE_URL "" + /* Define to the version of this package. */ -#define PACKAGE_VERSION "3.2" +#define PACKAGE_VERSION "3.4" /* Define to 1 if you have the ANSI C header files. */ #define STDC_HEADERS 1 /* Version number of package */ -#define VERSION "3.2" +#define VERSION "3.4" /* Define for Solaris 2.5.1 so the uint32_t typedef from , , or is not used. If the typedef were allowed, the diff -Nru libantlr3c-3.2/antlr3config.h.in libantlr3c-3.4+dfsg/antlr3config.h.in --- libantlr3c-3.2/antlr3config.h.in 2009-12-11 22:55:08.000000000 +0000 +++ libantlr3c-3.4+dfsg/antlr3config.h.in 2011-07-19 18:14:25.000000000 +0000 @@ -87,6 +87,10 @@ /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#undef LT_OBJDIR + /* Name of package */ #undef PACKAGE @@ -102,6 +106,9 @@ /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME +/* Define to the home page for this package. */ +#undef PACKAGE_URL + /* Define to the version of this package. */ #undef PACKAGE_VERSION diff -Nru libantlr3c-3.2/config.guess libantlr3c-3.4+dfsg/config.guess --- libantlr3c-3.2/config.guess 2009-12-11 22:55:09.000000000 +0000 +++ libantlr3c-3.4+dfsg/config.guess 2011-07-19 18:14:25.000000000 +0000 @@ -1,9 +1,10 @@ #! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 +# Free Software Foundation, Inc. -timestamp='2005-07-08' +timestamp='2009-11-20' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -26,16 +27,16 @@ # the same distribution terms that you use for the rest of that program. -# Originally written by Per Bothner . -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. +# Originally written by Per Bothner. Please send patches (context +# diff format) to and include a ChangeLog +# entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD me=`echo "$0" | sed -e 's,.*/,,'` @@ -55,8 +56,8 @@ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -Free Software Foundation, Inc. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -106,7 +107,7 @@ trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; @@ -160,6 +161,7 @@ arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched @@ -168,7 +170,7 @@ arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null + | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? @@ -206,8 +208,11 @@ *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; macppc:MirBSD:*:*) - echo powerppc-unknown-mirbsd${UNAME_RELEASE} + echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} @@ -319,14 +324,33 @@ case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; - i86pc:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize @@ -527,7 +551,7 @@ echo rs6000-ibm-aix3.2 fi exit ;; - *:AIX:*:[45]) + *:AIX:*:[456]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 @@ -635,7 +659,7 @@ # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep __LP64__ >/dev/null + grep -q __LP64__ then HP_ARCH="hppa2.0w" else @@ -764,12 +788,19 @@ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + case ${UNAME_MACHINE} in + pc98) + echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; - i*:MINGW*:*) + *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) @@ -779,12 +810,24 @@ i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; - x86:Interix*:[34]*) - echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' - exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we @@ -794,7 +837,7 @@ i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; - amd64:CYGWIN*:*:*) + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) @@ -814,7 +857,31 @@ i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + fi + exit ;; + avr32*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; cris:Linux:*:*) @@ -826,6 +893,17 @@ frv:Linux:*:*) echo frv-unknown-linux-gnu exit ;; + i*86:Linux:*:*) + LIBC=gnu + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; @@ -835,63 +913,33 @@ m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; - mips:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips - #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - mips64:Linux:*:*) + mips:Linux:*:* | mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU - #undef mips64 - #undef mips64el + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mips64el + CPU=${UNAME_MACHINE}el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips64 + CPU=${UNAME_MACHINE} #else CPU= #endif #endif EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu + or32:Linux:*:*) + echo or32-unknown-linux-gnu exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu + padre:Linux:*:*) + echo sparc-unknown-linux-gnu exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level @@ -901,8 +949,11 @@ *) echo hppa-unknown-linux-gnu ;; esac exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux @@ -916,68 +967,15 @@ sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit ;; - coff-i386) - echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit ;; - esac - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #ifdef __INTEL_COMPILER - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - test x"${LIBC}" != x && { - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit - } - test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } - ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both @@ -1006,7 +1004,7 @@ i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) @@ -1050,8 +1048,11 @@ pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 @@ -1089,6 +1090,16 @@ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; @@ -1101,7 +1112,7 @@ rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) @@ -1164,6 +1175,9 @@ BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; @@ -1173,6 +1187,15 @@ SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; @@ -1182,7 +1205,16 @@ *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown case $UNAME_PROCESSOR in - *86) UNAME_PROCESSOR=i686 ;; + i386) + eval $set_cc_for_build + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + UNAME_PROCESSOR="x86_64" + fi + fi ;; unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} @@ -1261,6 +1293,12 @@ i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 @@ -1421,9 +1459,9 @@ the operating system you are using. It is advised that you download the most up to date version of the config scripts from - http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess + http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD and - http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub + http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD If the version you run ($0) is already up to date, please send the following data and any information you think might be diff -Nru libantlr3c-3.2/config.sub libantlr3c-3.4+dfsg/config.sub --- libantlr3c-3.2/config.sub 2009-12-11 22:55:09.000000000 +0000 +++ libantlr3c-3.4+dfsg/config.sub 2011-07-19 18:14:25.000000000 +0000 @@ -1,9 +1,10 @@ #! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 +# Free Software Foundation, Inc. -timestamp='2005-07-08' +timestamp='2009-11-20' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -31,13 +32,16 @@ # Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. +# diff and a properly formatted GNU ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. @@ -71,8 +75,8 @@ version="\ GNU config.sub ($timestamp) -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -Free Software Foundation, Inc. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -119,8 +123,10 @@ # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in - nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \ - kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) + nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ + uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; @@ -146,10 +152,13 @@ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray) + -apple | -axis | -knuth | -cray | -microblaze) os= basic_machine=$1 ;; + -bluegene*) + os=-cnk + ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 @@ -171,6 +180,10 @@ -hiux*) os=-hiuxwe2 ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` @@ -187,6 +200,10 @@ # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` @@ -231,20 +248,24 @@ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ - | fr30 | frv \ + | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ - | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep | metag \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ - | mips64vr | mips64vrel \ + | mips64octeon | mips64octeonel \ | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ @@ -257,35 +278,40 @@ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ - | ms1 \ + | moxie \ + | mt \ | msp430 \ + | nios | nios2 \ | ns16k | ns32k \ | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ - | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b \ - | strongarm \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ + | ubicom32 \ | v850 | v850e \ | we32k \ - | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ - | z8k) - basic_machine=$basic_machine-unknown - ;; - m32c) + | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k | z80) basic_machine=$basic_machine-unknown ;; - m6811 | m68hc11 | m6812 | m68hc12) + m6811 | m68hc11 | m6812 | m68hc12 | picochip) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; + ms1) + basic_machine=mt-unknown + ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and @@ -305,25 +331,28 @@ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* \ + | avr-* | avr32-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ - | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ - | m32r-* | m32rle-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ - | mips64vr-* | mips64vrel-* \ + | mips64octeon-* | mips64octeonel-* \ | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ @@ -336,30 +365,34 @@ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ - | ms1-* \ + | mt-* \ | msp430-* \ + | nios-* | nios2-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ - | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ | tron-* \ + | ubicom32-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ - | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ - | xstormy16-* | xtensa-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa*-* \ | ymp-* \ - | z8k-*) + | z8k-* | z80-*) ;; - m32c-*) + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. @@ -423,6 +456,10 @@ basic_machine=m68k-apollo os=-bsd ;; + aros) + basic_machine=i386-pc + os=-aros + ;; aux) basic_machine=m68k-apple os=-aux @@ -431,10 +468,26 @@ basic_machine=ns32k-sequent os=-dynix ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; c90) basic_machine=c90-cray os=-unicos ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; convex-c1) basic_machine=c1-convex os=-bsd @@ -463,8 +516,8 @@ basic_machine=craynv-cray os=-unicosmp ;; - cr16c) - basic_machine=cr16c-unknown + cr16) + basic_machine=cr16-unknown os=-elf ;; crds | unos) @@ -502,6 +555,10 @@ basic_machine=m88k-motorola os=-sysv3 ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp @@ -656,6 +713,14 @@ basic_machine=m68k-isi os=-sysv ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; m88k-omron*) basic_machine=m88k-omron ;; @@ -667,10 +732,17 @@ basic_machine=ns32k-utek os=-sysv ;; + microblaze) + basic_machine=microblaze-xilinx + ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; miniframe) basic_machine=m68000-convergent ;; @@ -696,6 +768,9 @@ basic_machine=i386-pc os=-msdos ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; mvs) basic_machine=i370-ibm os=-mvs @@ -794,6 +869,14 @@ basic_machine=i860-intel os=-osf ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; pbd) basic_machine=sparc-tti ;; @@ -803,6 +886,12 @@ pc532 | pc532-*) basic_machine=ns32k-pc532 ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; @@ -859,6 +948,10 @@ basic_machine=i586-unknown os=-pw32 ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; rom68k) basic_machine=m68k-rom68k os=-coff @@ -885,6 +978,10 @@ sb1el) basic_machine=mipsisa64sb1el-unknown ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; sei) basic_machine=mips-sei os=-seiux @@ -896,6 +993,9 @@ basic_machine=sh-hitachi os=-hms ;; + sh5el) + basic_machine=sh5le-unknown + ;; sh64) basic_machine=sh64-unknown ;; @@ -985,6 +1085,10 @@ basic_machine=tic6x-unknown os=-coff ;; + tile*) + basic_machine=tile-unknown + os=-linux-gnu + ;; tx39) basic_machine=mipstx39-unknown ;; @@ -1060,6 +1164,10 @@ basic_machine=z8k-unknown os=-sim ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; none) basic_machine=none-none os=-none @@ -1098,10 +1206,10 @@ we32k) basic_machine=we32k-att ;; - sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; - sparc | sparcv8 | sparcv9 | sparcv9b) + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) basic_machine=sparc-sun ;; cydra) @@ -1148,6 +1256,9 @@ # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; @@ -1168,27 +1279,30 @@ # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* \ + | -aos* | -aros* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* \ + | -chorusos* | -chorusrdb* | -cegcc* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku*) + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1318,6 +1432,9 @@ -zvmoe) os=-zvmoe ;; + -dicos*) + os=-dicos + ;; -none) ;; *) @@ -1340,6 +1457,12 @@ # system, and we'll never get to this point. case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; *-acorn) os=-riscix1.2 ;; @@ -1349,9 +1472,9 @@ arm*-semi) os=-aout ;; - c4x-* | tic4x-*) - os=-coff - ;; + c4x-* | tic4x-*) + os=-coff + ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 @@ -1377,6 +1500,9 @@ m68*-cisco) os=-aout ;; + mep-*) + os=-elf + ;; mips*-cisco) os=-elf ;; @@ -1506,7 +1632,7 @@ -sunos*) vendor=sun ;; - -aix*) + -cnk*|-aix*) vendor=ibm ;; -beos*) diff -Nru libantlr3c-3.2/configure libantlr3c-3.4+dfsg/configure --- libantlr3c-3.2/configure 2009-12-11 22:55:07.000000000 +0000 +++ libantlr3c-3.4+dfsg/configure 2011-07-19 18:14:24.000000000 +0000 @@ -1,11 +1,15 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.63 for libantlr3c 3.2. +# Generated by GNU Autoconf 2.66 for libantlr3c 3.4. # # Report bugs to . # +# # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software +# Foundation, Inc. +# +# # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. # @@ -38,13 +42,13 @@ # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which @@ -52,23 +56,15 @@ alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; esac - fi - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - as_nl=' ' export as_nl @@ -76,7 +72,13 @@ as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else @@ -87,7 +89,7 @@ as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; - case $arg in + case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; @@ -110,13 +112,6 @@ } fi -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - # IFS # We need space, tab and new line, in precisely that order. Quoting is @@ -126,15 +121,15 @@ IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -case $0 in +case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done IFS=$as_save_IFS ;; @@ -146,12 +141,16 @@ fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } + exit 1 fi -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' @@ -163,330 +162,308 @@ LANGUAGE=C export LANGUAGE -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - # CDPATH. -$as_unset CDPATH - +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test "x$CONFIG_SHELL" = x; then - if (eval ":") 2>/dev/null; then - as_have_required=yes + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST else - as_have_required=no + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac fi - - if test $as_have_required = yes && (eval ": -(as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes else - exitcode=1 - echo positional parameters were not saved. + as_have_required=no fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : -test \$exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=\$LINENO - as_lineno_2=\$LINENO - test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && - test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -") 2> /dev/null; then - : else - as_candidate_shells= - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - case $as_dir in + as_found=: + case $as_dir in #( /*) for as_base in sh bash ksh sh5; do - as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi done;; esac + as_found=false done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } IFS=$as_save_IFS - for as_shell in $as_candidate_shells $SHELL; do - # Try only shells that exist, to save several forks. - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { ("$as_shell") 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - -: -_ASEOF -}; then - CONFIG_SHELL=$as_shell - as_have_required=yes - if { "$as_shell" 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - -: -(as_func_return () { - (exit $1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = "$1" ); then - : -else - exitcode=1 - echo positional parameters were not saved. -fi - -test $exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } - -_ASEOF -}; then - break -fi - -fi - - done - - if test "x$CONFIG_SHELL" != x; then - for as_var in BASH_ENV ENV - do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - done + if test "x$CONFIG_SHELL" != x; then : + # We cannot yet assume a decent shell, so we have to provide a + # neutralization value for shells without unset; and this also + # works around shells that cannot unset nonexistent variables. + BASH_ENV=/dev/null + ENV=/dev/null + (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi - - if test $as_have_required = no; then - echo This script requires a shell more modern than all the - echo shells that I found on your system. Please install a - echo modern shell, or manually run the script under such a - echo shell if you do have one. - { (exit 1); exit 1; } + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: jimi@temporal-wave.com about your system, including any +$0: error possibly output before this message. Then install +$0: a modern shell, or manually run the script under such a +$0: shell if you do have one." + fi + exit 1 fi - - fi - fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" -(eval "as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} +} # as_fn_mkdir_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append -exitcode=0 -if as_func_success; then - : +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' else - exitcode=1 - echo as_func_success failed. -fi + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi -if as_func_ret_success; then - : +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr else - exitcode=1 - echo as_func_ret_success failed. + as_expr=false fi -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false fi -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname else - exitcode=1 - echo positional parameters were not saved. + as_dirname=false fi -test \$exitcode = 0") || { - echo No shell found that supports shell functions. - echo Please tell bug-autoconf@gnu.org about your system, - echo including any error possibly output before this message. - echo This can help us improve future autoconf versions. - echo Configuration will now proceed without shell functions. -} +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= @@ -503,8 +480,7 @@ s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the @@ -514,29 +490,18 @@ exit } - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in +case `echo -n x` in #((((( -n*) - case `echo 'x\c'` in + case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then @@ -566,7 +531,7 @@ rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false @@ -585,10 +550,10 @@ if test -d "$1"; then test -d "$1/."; else - case $1 in + case $1 in #( -*)set "./$1";; esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' @@ -601,166 +566,14 @@ # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - - -# Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -echo=${ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null 2>&1 && unset CDPATH - -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string=`eval $cmd`) 2>/dev/null && - echo_test_string=`eval $cmd` && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - - -tagnames=${tagnames+${tagnames},}CXX -tagnames=${tagnames+${tagnames},}F77 - -exec 7<&0 &1 +test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` @@ -775,14 +588,14 @@ subdirs= MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='libantlr3c' PACKAGE_TARNAME='libantlr3c' -PACKAGE_VERSION='3.2' -PACKAGE_STRING='libantlr3c 3.2' +PACKAGE_VERSION='3.4' +PACKAGE_STRING='libantlr3c 3.4' PACKAGE_BUGREPORT='jimi@temporal-wave.com' +PACKAGE_URL='' ac_unique_file="src/antlr3parser.c" # Factoring default headers for most tests. @@ -821,25 +634,26 @@ # include #endif" -ac_subst_vars='LTLIBOBJS +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS LIBOBJS OBJECT_MODE -LIBTOOL -ac_ct_F77 -FFLAGS -F77 -CXXCPP -am__fastdepCXX_FALSE -am__fastdepCXX_TRUE -CXXDEPMODE -ac_ct_CXX -CXXFLAGS -CXX CPP +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL RANLIB AR -ECHO +OBJDUMP LN_S +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP EGREP GREP SED @@ -851,6 +665,7 @@ build_vendor build_cpu build +LIBTOOL MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE @@ -877,6 +692,7 @@ SET_MAKE AWK mkdir_p +MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh @@ -888,6 +704,7 @@ VERSION PACKAGE CYGPATH_W +am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM @@ -921,6 +738,7 @@ program_transform_name prefix exec_prefix +PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION @@ -939,11 +757,10 @@ enable_maintainer_mode enable_shared enable_static +with_pic enable_fast_install with_gnu_ld enable_libtool_lock -with_pic -with_tags ' ac_precious_vars='build_alias host_alias @@ -953,13 +770,7 @@ LDFLAGS LIBS CPPFLAGS -CPP -CXX -CXXFLAGS -CCC -CXXCPP -F77 -FFLAGS' +CPP' # Initialize some variables set by options. @@ -1068,8 +879,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1095,8 +905,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1300,8 +1109,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1317,8 +1125,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1348,17 +1155,17 @@ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) { $as_echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; @@ -1375,15 +1182,13 @@ if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { $as_echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; - fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 - { (exit 1); exit 1; }; } ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi @@ -1406,8 +1211,7 @@ [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac - { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' @@ -1421,8 +1225,8 @@ if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 + $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used" >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -1437,11 +1241,9 @@ ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - { $as_echo "$as_me: error: working directory cannot be determined" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. @@ -1480,13 +1282,11 @@ fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 - { (exit 1); exit 1; }; } + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then @@ -1512,7 +1312,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures libantlr3c 3.2 to adapt to many kinds of systems. +\`configure' configures libantlr3c 3.4 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1526,7 +1326,7 @@ --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages + -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files @@ -1582,7 +1382,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of libantlr3c 3.2:";; + short | recursive ) echo "Configuration of libantlr3c 3.4:";; esac cat <<\_ACEOF @@ -1614,10 +1414,9 @@ Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-pic try to use only PIC/non-PIC objects [default=use both] - --with-tags[=TAGS] include additional configurations [automatic] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] Some influential environment variables: CC C compiler command @@ -1625,14 +1424,9 @@ LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor - CXX C++ compiler command - CXXFLAGS C++ compiler flags - CXXCPP C++ preprocessor - F77 Fortran 77 compiler command - FFLAGS Fortran 77 compiler flags Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. @@ -1700,11 +1494,10 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -libantlr3c configure 3.2 -generated by GNU Autoconf 2.63 +libantlr3c configure 3.4 +generated by GNU Autoconf 2.66 -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +Copyright (C) 2010 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. @@ -1740,141 +1533,585 @@ _ACEOF exit fi -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -It was created by libantlr3c $as_me 3.2, which was -generated by GNU Autoconf 2.63. Invocation command line was +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 - $ $0 $@ + ac_retval=1 +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval -_ACEOF -exec 5>>config.log +} # ac_fn_c_try_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () { -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` +} # ac_fn_c_try_link -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval "test \"\${$3+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} -_ASUNAME +} # ac_fn_c_check_header_compile -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" -done -IFS=$as_save_IFS +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -} >&5 + ac_retval=1 +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval -cat >&5 <<_ACEOF +} # ac_fn_c_try_cpp +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -## ----------- ## -## Core tests. ## -## ----------- ## + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval -_ACEOF +} # ac_fn_c_try_run +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval "test \"\${$3+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - ac_configure_args="$ac_configure_args '$ac_arg'" - ;; - esac - done -done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo +#ifdef __STDC__ +# include +#else +# include +#endif - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_check_func + +# ac_fn_c_check_type LINENO TYPE VAR INCLUDES +# ------------------------------------------- +# Tests whether TYPE exists after having included INCLUDES, setting cache +# variable VAR accordingly. +ac_fn_c_check_type () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval "test \"\${$3+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_check_type + +# ac_fn_c_find_intX_t LINENO BITS VAR +# ----------------------------------- +# Finds a signed integer type with width BITS, setting cache variable VAR +# accordingly. +ac_fn_c_find_intX_t () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for int$2_t" >&5 +$as_echo_n "checking for int$2_t... " >&6; } +if eval "test \"\${$3+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + # Order is important - never check a type that is potentially smaller + # than half of the expected target width. + for ac_type in int$2_t 'int' 'long int' \ + 'long long int' 'short int' 'signed char'; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default + enum { N = $2 / 2 - 1 }; +int +main () +{ +static int test_array [1 - 2 * !(0 < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1))]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default + enum { N = $2 / 2 - 1 }; +int +main () +{ +static int test_array [1 - 2 * !(($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1) + < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 2))]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + case $ac_type in #( + int$2_t) : + eval "$3=yes" ;; #( + *) : + eval "$3=\$ac_type" ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if eval test \"x\$"$3"\" = x"no"; then : + +else + break +fi + done +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_find_intX_t + +# ac_fn_c_find_uintX_t LINENO BITS VAR +# ------------------------------------ +# Finds an unsigned integer type with width BITS, setting cache variable VAR +# accordingly. +ac_fn_c_find_uintX_t () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5 +$as_echo_n "checking for uint$2_t... " >&6; } +if eval "test \"\${$3+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + # Order is important - never check a type that is potentially smaller + # than half of the expected target width. + for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \ + 'unsigned long long int' 'unsigned short int' 'unsigned char'; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !((($ac_type) -1 >> ($2 / 2 - 1)) >> ($2 / 2 - 1) == 3)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + case $ac_type in #( + uint$2_t) : + eval "$3=yes" ;; #( + *) : + eval "$3=\$ac_type" ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if eval test \"x\$"$3"\" = x"no"; then : + +else + break +fi + done +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_find_uintX_t +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by libantlr3c $as_me 3.4, which was +generated by GNU Autoconf 2.66. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) $as_unset $ac_var ;; + *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done @@ -1893,11 +2130,9 @@ ) echo - cat <<\_ASBOX -## ----------------- ## + $as_echo "## ----------------- ## ## Output variables. ## -## ----------------- ## -_ASBOX +## ----------------- ##" echo for ac_var in $ac_subst_vars do @@ -1910,11 +2145,9 @@ echo if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------------- ## + $as_echo "## ------------------- ## ## File substitutions. ## -## ------------------- ## -_ASBOX +## ------------------- ##" echo for ac_var in $ac_subst_files do @@ -1928,11 +2161,9 @@ fi if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## + $as_echo "## ----------- ## ## confdefs.h. ## -## ----------- ## -_ASBOX +## ----------- ##" echo cat confdefs.h echo @@ -1946,46 +2177,53 @@ exit $exit_status ' 0 for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h +$as_echo "/* confdefs.h */" > confdefs.h + # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then - ac_site_file1=$CONFIG_SITE + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site @@ -1996,19 +2234,23 @@ for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue - if test -r "$ac_site_file"; then - { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; @@ -2016,7 +2258,7 @@ esac fi else - { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi @@ -2031,11 +2273,11 @@ eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) - { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; @@ -2045,17 +2287,17 @@ ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else - { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi - { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac @@ -2067,20 +2309,26 @@ esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then - { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu @@ -2088,45 +2336,16 @@ - - - - - - - - - - - - - - - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - -# Check whether --enable-debuginfo was given. -if test "${enable_debuginfo+set}" = set; then - enableval=$enable_debuginfo; -else - enable_debuginfo=no -fi +# Check whether --enable-debuginfo was given. +if test "${enable_debuginfo+set}" = set; then : + enableval=$enable_debuginfo; +else + enable_debuginfo=no +fi # Check whether --enable-64bit was given. -if test "${enable_64bit+set}" = set; then +if test "${enable_64bit+set}" = set; then : enableval=$enable_64bit; else enable_64bit=no @@ -2134,7 +2353,7 @@ # Check whether --enable-abiflags was given. -if test "${enable_abiflags+set}" = set; then +if test "${enable_abiflags+set}" = set; then : enableval=$enable_abiflags; else enable_abiflags=yes @@ -2142,14 +2361,15 @@ # Check whether --enable-antlrdebug was given. -if test "${enable_antlrdebug+set}" = set; then +if test "${enable_antlrdebug+set}" = set; then : enableval=$enable_antlrdebug; else enable_antlrdebug=yes fi -am__api_version="1.9" +am__api_version='1.11' + ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then @@ -2167,9 +2387,7 @@ fi done if test -z "$ac_aux_dir"; then - { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 -$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, @@ -2195,10 +2413,10 @@ # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then +if test "${ac_cv_path_install+set}" = set; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -2206,11 +2424,11 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. @@ -2247,7 +2465,7 @@ ;; esac -done + done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir @@ -2263,7 +2481,7 @@ INSTALL=$ac_install_sh fi fi -{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. @@ -2274,21 +2492,34 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; +esac + # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` + set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ @@ -2298,11 +2529,8 @@ # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". - { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&5 -$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken +alias in your environment" "$LINENO" 5 fi test "$2" = conftest.file @@ -2311,13 +2539,10 @@ # Ok. : else - { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! -Check your system clock" >&5 -$as_echo "$as_me: error: newly created file is older than distributed files! -Check your system clock" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 fi -{ $as_echo "$as_me:$LINENO: result: yes" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" @@ -2332,56 +2557,187 @@ # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= - { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi -if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" else - mkdir_p='$(install_sh) -d' + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" fi fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_AWK+set}" = set; then +if test "${ac_cv_prog_AWK+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then @@ -2392,24 +2748,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then - { $as_echo "$as_me:$LINENO: result: $AWK" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2417,11 +2773,11 @@ test -n "$AWK" && break done -{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF @@ -2429,7 +2785,7 @@ all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; @@ -2439,11 +2795,11 @@ rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi @@ -2457,12 +2813,14 @@ fi rmdir .tst 2>/dev/null -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} - { (exit 1); exit 1; }; } +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi fi # test whether we have cygpath @@ -2477,7 +2835,7 @@ # Define the identity of the package. PACKAGE='libantlr3c' - VERSION='3.2' + VERSION='3.4' cat >>confdefs.h <<_ACEOF @@ -2505,108 +2863,6 @@ MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} -install_sh=${install_sh-"$am_aux_dir/install-sh"} - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" - # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. @@ -2635,9 +2891,9 @@ do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then +if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2648,24 +2904,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2679,9 +2935,9 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then @@ -2692,24 +2948,24 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2722,7 +2978,7 @@ else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac @@ -2731,57 +2987,37 @@ fi -test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. -$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 -{ (ac_try="$ac_compiler --version >&5" +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler --version >&5") 2>&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2797,8 +3033,8 @@ # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: @@ -2814,17 +3050,17 @@ done rm -f $ac_rmfiles -if { (ac_try="$ac_link_default" +if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, @@ -2841,7 +3077,7 @@ # certainly right. break;; *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi @@ -2860,84 +3096,41 @@ else ac_file='' fi - -{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -if test -z "$ac_file"; then - $as_echo "$as_me: failed program was:" >&5 +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; }; } +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } fi - +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } - fi - fi -fi -{ $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } -if { (ac_try="$ac_link" +if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with @@ -2952,32 +3145,83 @@ esac done else - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } fi - -rm -f conftest$ac_cv_exeext -{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } -if test "${ac_cv_objext+set}" = set; then +if test "${ac_cv_objext+set}" = set; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2989,17 +3233,17 @@ } _ACEOF rm -f conftest.o conftest.obj -if { (ac_try="$ac_compile" +if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in @@ -3012,31 +3256,23 @@ $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } fi - rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then +if test "${ac_cv_c_compiler_gnu+set}" = set; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -3050,37 +3286,16 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_compiler_gnu=no + ac_compiler_gnu=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes @@ -3089,20 +3304,16 @@ fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then +if test "${ac_cv_prog_cc_g+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -3113,35 +3324,11 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - CFLAGS="" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -3152,36 +3339,12 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_compile "$LINENO"; then : - ac_c_werror_flag=$ac_save_c_werror_flag +else + ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -3192,42 +3355,17 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS @@ -3244,18 +3382,14 @@ CFLAGS= fi fi -{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then +if test "${ac_cv_prog_cc_c89+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -3312,32 +3446,9 @@ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then + if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done @@ -3348,17 +3459,19 @@ # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) - { $as_echo "$as_me:$LINENO: result: none needed" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) - { $as_echo "$as_me:$LINENO: result: unsupported" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac +if test "x$ac_cv_prog_cc_c89" != xno; then : +fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -3373,44 +3486,44 @@ am_make=${MAKE-make} cat > confinc << 'END' am__doit: - @echo done + @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac fi -{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then +if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi @@ -3418,9 +3531,7 @@ am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi - - -if test "x$enable_dependency_tracking" != xno; then + if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else @@ -3430,12 +3541,11 @@ - depcc="$CC" am_compiler_list= -{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then @@ -3461,6 +3571,11 @@ if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and @@ -3478,7 +3593,17 @@ done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested @@ -3488,18 +3613,23 @@ break fi ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; none) break ;; esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message @@ -3523,13 +3653,11 @@ fi fi -{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - -if + if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= @@ -3540,20 +3668,19 @@ fi -{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then +if test "${enable_maintainer_mode+set}" = set; then : enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=no fi - { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 $as_echo "$USE_MAINTAINER_MODE" >&6; } - - -if test $USE_MAINTAINER_MODE = yes; then + if test $USE_MAINTAINER_MODE = yes; then MAINTAINER_MODE_TRUE= MAINTAINER_MODE_FALSE='#' else @@ -3564,109 +3691,54 @@ MAINT=$MAINTAINER_MODE_TRUE -# Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_shared=yes -fi +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.2.10' +macro_revision='1.3175' + + + -# Check whether --enable-static was given. -if test "${enable_static+set}" = set; then - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_static=yes -fi -# Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_fast_install=yes -fi + + + + +ltmain="$ac_aux_dir/ltmain.sh" + # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 -{ $as_echo "$as_me:$LINENO: checking build system type" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } -if test "${ac_cv_build+set}" = set; then +if test "${ac_cv_build+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && - { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; -*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -$as_echo "$as_me: error: invalid value of canonical build" >&2;} - { (exit 1); exit 1; }; };; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' @@ -3682,28 +3754,24 @@ case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac -{ $as_echo "$as_me:$LINENO: checking host system type" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } -if test "${ac_cv_host+set}" = set; then +if test "${ac_cv_host+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; -*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -$as_echo "$as_me: error: invalid value of canonical host" >&2;} - { (exit 1); exit 1; }; };; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' @@ -3719,68 +3787,160 @@ case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac -{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if test "${lt_cv_path_SED+set}" = set; then - $as_echo_n "(cached) " >&6 +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`print -r -- -n 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' else - # Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case "$ECHO" in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if test "${ac_cv_path_SED+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do + for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 done done -done + done IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done +else + ac_cv_path_SED=$SED +fi fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + -SED=$lt_cv_path_SED -{ $as_echo "$as_me:$LINENO: result: $SED" >&5 -$as_echo "$SED" >&6; } -{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if test "${ac_cv_path_GREP+set}" = set; then +if test "${ac_cv_path_GREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then @@ -3791,7 +3951,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do + for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue @@ -3811,7 +3971,7 @@ $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` + as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" @@ -3826,26 +3986,24 @@ $ac_path_GREP_found && break 3 done done -done + done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then - { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" -{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } -if test "${ac_cv_path_EGREP+set}" = set; then +if test "${ac_cv_path_EGREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 @@ -3859,7 +4017,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do + for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue @@ -3879,7 +4037,7 @@ $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` + as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" @@ -3894,12 +4052,10 @@ $ac_path_EGREP_found && break 3 done done -done + done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then - { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP @@ -3907,14 +4063,100 @@ fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if test "${ac_cv_path_FGREP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + # Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then +if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no @@ -3923,7 +4165,7 @@ ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) @@ -3937,9 +4179,9 @@ [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; @@ -3953,13 +4195,13 @@ ;; esac elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else - { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi -if test "${lt_cv_path_LD+set}" = set; then +if test "${lt_cv_path_LD+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then @@ -3990,18 +4232,16 @@ LD="$lt_cv_path_LD" if test -n "$LD"; then - { $as_echo "$as_me:$LINENO: result: $LD" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 $as_echo "$LD" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi -test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if test "${lt_cv_prog_gnu_ld+set}" = set; then +if test "${lt_cv_prog_gnu_ld+set}" = set; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. @@ -4014,39 +4254,21 @@ ;; esac fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld -{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -$as_echo_n "checking for $LD option to reload object files... " >&6; } -if test "${lt_cv_ld_reload_flag+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -$as_echo "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 -$as_echo_n "checking for BSD-compatible nm... " >&6; } -if test "${lt_cv_path_NM+set}" = set; then + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if test "${lt_cv_path_NM+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$NM"; then @@ -4090,2187 +4312,1104 @@ done IFS="$lt_save_ifs" done - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + : ${lt_cv_path_NM=no} fi fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } -NM="$lt_cv_path_NM" +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_DUMPBIN+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } else - { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -{ $as_echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 -$as_echo_n "checking how to recognise dependent libraries... " >&6; } -if test "${lt_cv_deplibs_check_method+set}" = set; then + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then : $as_echo_n "(cached) " >&6 else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -beos*) - lt_cv_deplibs_check_method=pass_all - ;; +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; + test -n "$ac_ct_DUMPBIN" && break +done -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump'. - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi -freebsd* | kfreebsd*-gnu | dragonfly*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: ;; esac - else - lt_cv_deplibs_check_method=pass_all fi - ;; -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; -interix3*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; -# This must be Linux ELF. -linux*) - lt_cv_deplibs_check_method=pass_all - ;; -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if test "${lt_cv_nm_interface+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" fi - ;; + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi -nto-qnx*) - lt_cv_deplibs_check_method=unknown - ;; +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if test "${lt_cv_sys_max_cmd_len+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi - ;; + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; ;; - ncr) - lt_cv_deplibs_check_method=pass_all + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 ;; - siemens) - lt_cv_deplibs_check_method=pass_all + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi ;; - pc) - lt_cv_deplibs_check_method=pass_all + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi ;; esac - ;; -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac +fi +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -$as_echo "$lt_cv_deplibs_check_method" >&6; } -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown +max_cmd_len=$lt_cv_sys_max_cmd_len -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -# Allow CC to be a program name with arguments. -compiler=$CC +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 +$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 +$as_echo "$xsi_shell" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 +$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 +$as_echo "$lt_shell_append" >&6; } -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval=$enable_libtool_lock; +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false fi -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 4337 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' ;; +esac + -x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if test "${lt_cv_cc_needs_belf+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - lt_cv_cc_needs_belf=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - lt_cv_cc_needs_belf=no -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if test "${lt_cv_ld_reload_flag+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -$as_echo "$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) LD="${LD-ld} -64" ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac -esac -need_locks="$enable_libtool_lock" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_OBJDUMP+set}" = set; then : $as_echo_n "(cached) " >&6 else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - # Broken: fails on valid input. -continue fi - -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -f conftest.err conftest.$ac_ext -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break fi - - done - ac_cv_prog_CPP=$CPP +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP fi -{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi - -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : + OBJDUMP=$ac_ct_OBJDUMP + fi else - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } + OBJDUMP="$ac_cv_prog_OBJDUMP" fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if test "${ac_cv_header_stdc+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include +test -z "$OBJDUMP" && OBJDUMP=objdump -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_header_stdc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* -fi -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if test "${lt_cv_deplibs_check_method+set}" = set; then : + $as_echo_n "(cached) " >&6 else - ac_cv_header_stdc=no -fi -rm -f conftest* + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. -fi +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif +beos*) + lt_cv_deplibs_check_method=pass_all + ;; -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. + if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; -fi -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; -fi +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; -# On IRIX 5.3, sys/types and inttypes.h are conflicting. +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; +# This must be Linux ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; -fi +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; -done +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; -for ac_header in dlfcn.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_compiler=no fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ------------------------------------- ## -## Report this to jimi@temporal-wave.com ## -## ------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF -fi -done -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -if test -z "$CXX"; then - if test -n "$CCC"; then - CXX=$CCC - else - if test -n "$ac_tool_prefix"; then - for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CXX+set}" = set; then +if test "${ac_cv_prog_AR+set}" = set; then : $as_echo_n "(cached) " >&6 else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_AR="${ac_tool_prefix}ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -CXX=$ac_cv_prog_CXX -if test -n "$CXX"; then - { $as_echo "$as_me:$LINENO: result: $CXX" >&5 -$as_echo "$CXX" >&6; } +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - test -n "$CXX" && break - done fi -if test -z "$CXX"; then - ac_ct_CXX=$CXX - for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_CXX"; then - ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CXX="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_ac_ct_AR="ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -ac_ct_CXX=$ac_cv_prog_ac_ct_CXX -if test -n "$ac_ct_CXX"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 -$as_echo "$ac_ct_CXX" >&6; } +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - - test -n "$ac_ct_CXX" && break -done - - if test "x$ac_ct_CXX" = x; then - CXX="g++" + if test "x$ac_ct_AR" = x; then + AR="false" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - CXX=$ac_ct_CXX + AR=$ac_ct_AR fi +else + AR="$ac_cv_prog_AR" fi - fi -fi -# Provide some information about the compiler. -$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru -{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 -$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } -if test "${ac_cv_cxx_compiler_gnu+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_compiler_gnu=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_cxx_compiler_gnu=$ac_compiler_gnu -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 -$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GXX=yes -else - GXX= -fi -ac_test_CXXFLAGS=${CXXFLAGS+set} -ac_save_CXXFLAGS=$CXXFLAGS -{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 -$as_echo_n "checking whether $CXX accepts -g... " >&6; } -if test "${ac_cv_prog_cxx_g+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_save_cxx_werror_flag=$ac_cxx_werror_flag - ac_cxx_werror_flag=yes - ac_cv_prog_cxx_g=no - CXXFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cxx_g=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - CXXFLAGS="" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cxx_werror_flag=$ac_save_cxx_werror_flag - CXXFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cxx_g=yes +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cxx_werror_flag=$ac_save_cxx_werror_flag +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 -$as_echo "$ac_cv_prog_cxx_g" >&6; } -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS=$ac_save_CXXFLAGS -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" else - CXXFLAGS="-g" + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP fi else - if test "$GXX" = yes; then - CXXFLAGS="-O2" - else - CXXFLAGS= - fi + STRIP="$ac_cv_prog_STRIP" fi -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -depcc="$CXX" am_compiler_list= +test -z "$STRIP" && STRIP=: -{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_RANLIB+set}" = set; then : $as_echo_n "(cached) " >&6 else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CXX_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CXX_dependencies_compiler_type=$depmode - break - fi - fi +done done +IFS=$as_save_IFS - cd .. - rm -rf conftest.dir +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } else - am_cv_CXX_dependencies_compiler_type=none + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -fi -{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } -CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then - am__fastdepCXX_TRUE= - am__fastdepCXX_FALSE='#' + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi else - am__fastdepCXX_TRUE='#' - am__fastdepCXX_FALSE= + RANLIB="$ac_cv_prog_RANLIB" fi +test -z "$RANLIB" && RANLIB=: -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 -$as_echo_n "checking how to run the C++ preprocessor... " >&6; } -if test -z "$CXXCPP"; then - if test "${ac_cv_prog_CXXCPP+set}" = set; then - $as_echo_n "(cached) " >&6 -else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || - test ! -s conftest.err - }; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= - # Passes both tests. -ac_preproc_ok=: -break +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi -rm -f conftest.err conftest.$ac_ext +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - done - ac_cv_prog_CXXCPP=$CXXCPP -fi - CXXCPP=$ac_cv_prog_CXXCPP -else - ac_cv_prog_CXXCPP=$CXXCPP -fi -{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5 -$as_echo "$CXXCPP" >&6; } -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || - test ! -s conftest.err - }; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; }; } -fi -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -fi -ac_ext=f -ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' -ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_f77_compiler_gnu -if test -n "$ac_tool_prefix"; then - for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_F77+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$F77"; then - ac_cv_prog_F77="$F77" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_F77="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS -fi -fi -F77=$ac_cv_prog_F77 -if test -n "$F77"; then - { $as_echo "$as_me:$LINENO: result: $F77" >&5 -$as_echo "$F77" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - test -n "$F77" && break - done -fi -if test -z "$F77"; then - ac_ct_F77=$F77 - for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_F77+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_F77"; then - ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_F77="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS -fi -fi -ac_ct_F77=$ac_cv_prog_ac_ct_F77 -if test -n "$ac_ct_F77"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 -$as_echo "$ac_ct_F77" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - test -n "$ac_ct_F77" && break -done - if test "x$ac_ct_F77" = x; then - F77="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - F77=$ac_ct_F77 - fi -fi -# Provide some information about the compiler. -$as_echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -rm -f a.out - -# If we don't use `.F' as extension, the preprocessor is not run on the -# input file. (Note that this only needs to work for GNU compilers.) -ac_save_ext=$ac_ext -ac_ext=F -{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 -$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; } -if test "${ac_cv_f77_compiler_gnu+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF - program main -#ifndef __GNUC__ - choke me -#endif - end -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_f77_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_compiler_gnu=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_f77_compiler_gnu=$ac_compiler_gnu -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 -$as_echo "$ac_cv_f77_compiler_gnu" >&6; } -ac_ext=$ac_save_ext -ac_test_FFLAGS=${FFLAGS+set} -ac_save_FFLAGS=$FFLAGS -FFLAGS= -{ $as_echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 -$as_echo_n "checking whether $F77 accepts -g... " >&6; } -if test "${ac_cv_prog_f77_g+set}" = set; then - $as_echo_n "(cached) " >&6 -else - FFLAGS=-g -cat >conftest.$ac_ext <<_ACEOF - program main - end -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_f77_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_f77_g=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_prog_f77_g=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 -$as_echo "$ac_cv_prog_f77_g" >&6; } -if test "$ac_test_FFLAGS" = set; then - FFLAGS=$ac_save_FFLAGS -elif test $ac_cv_prog_f77_g = yes; then - if test "x$ac_cv_f77_compiler_gnu" = xyes; then - FFLAGS="-g -O2" - else - FFLAGS="-g" - fi -else - if test "x$ac_cv_f77_compiler_gnu" = xyes; then - FFLAGS="-O2" - else - FFLAGS= - fi -fi - -if test $ac_compiler_gnu = yes; then - G77=yes -else - G77= -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! - -# find the maximum length of command line arguments -{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 -$as_echo_n "checking the maximum length of command line arguments... " >&6; } -if test "${lt_cv_sys_max_cmd_len+set}" = set; then - $as_echo_n "(cached) " >&6 -else - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - cygwin* | mingw*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ - = "XX$teststring") >/dev/null 2>&1 && - new_result=`expr "X$teststring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - teststring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - ;; - esac -fi -if test -n $lt_cv_sys_max_cmd_len ; then - { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 -$as_echo "$lt_cv_sys_max_cmd_len" >&6; } -else - { $as_echo "$as_me:$LINENO: result: none" >&5 -$as_echo "none" >&6; } -fi +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} +# Allow CC to be a program name with arguments. +compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then +if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then : $as_echo_n "(cached) " >&6 else @@ -6283,33 +5422,18 @@ # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; -cygwin* | mingw* | pw32*) +cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; -hpux*) # Its linker distinguishes data from code symbols +hpux*) if test "$host_cpu" = ia64; then symcode='[ABCDEGRST]' fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -linux*) - if test "$host_cpu" = ia64; then - symcode='[ABCDGIRSTW]' - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' @@ -6334,57 +5458,85 @@ ;; esac +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -# Try without a prefix undercore, then with it. +# Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* - cat > conftest.$ac_ext < conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; -void nm_test_func(){} +void nm_test_func(void); +void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} -EOF +_LT_EOF - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm - if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s "$nlist"; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" @@ -6393,53 +5545,55 @@ fi # Make sure that we snagged all the symbols we need. - if grep ' nm_test_var$' "$nlist" >/dev/null; then - if grep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif -EOF +_LT_EOF # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif + cat <<_LT_EOF >> conftest.$ac_ext -/* The mapping between symbol names and symbols. */ +/* The mapping between symbol names and symbols. */ const struct { const char *name; - lt_ptr_t address; + void *address; } -lt_preloaded_symbols[] = +lt__PROGRAM__LTX_preloaded_symbols[] = { -EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} }; +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + #ifdef __cplusplus } #endif -EOF +_LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_save_LIBS="$LIBS" lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext}; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS="$lt_save_LIBS" @@ -6457,7 +5611,7 @@ echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi - rm -f conftest* conftst* + rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then @@ -6473,6115 +5627,3599 @@ lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:$LINENO: result: failed" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 $as_echo "failed" >&6; } else - { $as_echo "$as_me:$LINENO: result: ok" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } fi -{ $as_echo "$as_me:$LINENO: checking for objdir" >&5 -$as_echo_n "checking for objdir... " >&6; } -if test "${lt_cv_objdir+set}" = set; then - $as_echo_n "(cached) " >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 -$as_echo "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' -# Constants: -rm="rm -f" -# Global variables: -default_ofile=libtool -can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -set dummy ${ac_tool_prefix}ar; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_AR+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:$LINENO: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi -fi -if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_AR+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="ar" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -else - AR="$ac_cv_prog_AR" -fi -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 + + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if test "${lt_cv_cc_needs_belf+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_RANLIB+set}" = set; then +if test "${ac_cv_prog_DSYMUTIL+set}" = set; then : $as_echo_n "(cached) " >&6 else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then +if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - RANLIB=$ac_ct_RANLIB + DSYMUTIL=$ac_ct_DSYMUTIL fi else - RANLIB="$ac_cv_prog_RANLIB" + DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then +if test "${ac_cv_prog_NMEDIT+set}" = set; then : $as_echo_n "(cached) " >&6 else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_STRIP" = x; then - STRIP=":" + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - STRIP=$ac_ct_STRIP + NMEDIT=$ac_ct_NMEDIT fi else - STRIP="$ac_cv_prog_STRIP" + NMEDIT="$ac_cv_prog_NMEDIT" fi + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_LIPO+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi - -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then : $as_echo_n "(cached) " >&6 else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <&2 + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" fi -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_OTOOL+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:$LINENO: checking for file" >&5 -$as_echo_n "checking for file... " >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then : $as_echo_n "(cached) " >&6 else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi +IFS=$as_save_IFS -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" else - MAGIC_CMD=: + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL fi +else + OTOOL="$ac_cv_prog_OTOOL" fi + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_OTOOL64+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi - ;; -esac - -enable_dlopen=no -enable_win32_dll=no +done + done +IFS=$as_save_IFS -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval=$enable_libtool_lock; +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -# Check whether --with-pic was given. -if test "${with_pic+set}" = set; then - withval=$with_pic; pic_mode="$withval" +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } else - pic_mode=default + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -test -z "$pic_mode" && pic_mode=default + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi -# Use C for the default configuration in the libtool script -tagname= -lt_save_CC="$CC" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Source file extension for C test sources. -ac_ext=c -# Object file extension for compiled C test sources. -objext=o -objext=$objext -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;\n" -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}\n' -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -# Allow CC to be a program name with arguments. -compiler=$CC -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -printf "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* -ac_outfile=conftest.$ac_objext -printf "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm conftest* -lt_prog_compiler_no_builtin_flag= -if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag=' -fno-builtin' -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7101: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:7105: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $rm conftest* - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - -lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - -{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } - - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - interix3*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if test "${lt_cv_apple_cc_single_mod+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* fi - ;; +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if test "${lt_cv_ld_exported_symbols_list+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; +int +main () +{ - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes +else + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if test "${lt_cv_ld_force_load+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then + lt_cv_ld_force_load=yes else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + cat conftest.err >&5 fi - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic='-qnocommon' - lt_prog_compiler_wl='-Wl,' - ;; - esac - ;; - - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' - ;; + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext - linux*) - case $cc_basename in - icc* | ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - esac - ;; + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; + done + ac_cv_prog_CPP=$CPP - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 -$as_echo "$lt_prog_compiler_pic" >&6; } +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then -{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if test "${lt_prog_compiler_pic_works+set}" = set; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if test "${ac_cv_header_stdc+set}" = set; then : $as_echo_n "(cached) " >&6 else - lt_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7369: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:7373: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_prog_compiler_pic_works=yes - fi - fi - $rm conftest* + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include -fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 -$as_echo "$lt_prog_compiler_pic_works" >&6; } +int +main () +{ -if test x"$lt_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no + ac_cv_header_stdc=no fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_prog_compiler_static_works+set}" = set; then - $as_echo_n "(cached) " >&6 else - lt_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - printf "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_prog_compiler_static_works=yes - fi - else - lt_prog_compiler_static_works=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" + ac_cv_header_stdc=no +fi +rm -f conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 -$as_echo "$lt_prog_compiler_static_works" >&6; } -if test x"$lt_prog_compiler_static_works" = xyes; then - : +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + else - lt_prog_compiler_static= + ac_cv_header_stdc=no fi +rm -f conftest* +fi -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o+set}" = set; then - $as_echo_n "(cached) " >&6 +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : else - lt_cv_prog_compiler_c_o=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - printf "$lt_simple_compile_test_code" > conftest.$ac_ext + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7473: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:7477: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no fi -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi - runpath_var= - allow_undefined_flag= - enable_shared_with_static_runtimes=no - archive_cmds= - archive_expsym_cmds= - old_archive_From_new_cmds= - old_archive_from_expsyms_cmds= - export_dynamic_flag_spec= - whole_archive_flag_spec= - thread_safe_flag_spec= - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld= - hardcode_libdir_separator= - hardcode_direct=no - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - link_all_deplibs=unknown - hardcode_automatic=no - module_cmds= - module_expsym_cmds= - always_export_symbols=no - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - ld_shlibs=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac +fi - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - cat <&2 +done -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. -EOF - fi - ;; - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs=no - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; +# Set options - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - interix3*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; + enable_dlopen=no - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test $supports_anon_versioning = yes; then - archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + enable_win32_dll=no + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes fi - else - ld_shlibs=no - fi + done + IFS="$lt_save_ifs" ;; + esac +else + enable_shared=yes +fi - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. -_LT_EOF - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = no; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" ;; + esac +else + enable_static=yes +fi - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - archive_cmds='' - hardcode_direct=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; pic_mode="$withval" else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - + pic_mode=default fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +test -z "$pic_mode" && pic_mode=default -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes fi - fi + done + IFS="$lt_save_ifs" ;; + esac +else + enable_fast_install=yes +fi - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes=yes - ;; - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - whole_archive_flag_spec='' - link_all_deplibs=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' - module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs=no - ;; - esac - fi - ;; - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - freebsd1*) - ld_shlibs=no - ;; - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu | dragonfly*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - hpux9*) - if test "$GCC" = yes; then - archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' - hardcode_direct=yes - export_dynamic_flag_spec='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - case $host_cpu in - hppa*64*|ia64*) - hardcode_libdir_flag_spec_ld='+b $libdir' - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - export_dynamic_flag_spec='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_ld='-rpath $libdir' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - openbsd*) - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - solaris*) - no_undefined_flag=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine linker options so we - # cannot just pass the convience library names through - # without $wl, iff we do not link with $LD. - # Luckily, gcc supports the same syntax we need for Sun Studio. - # Supported since Solaris 2.6 (maybe 2.5.1?) - case $wlarc in - '') - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - *) - whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; - esac ;; - esac - link_all_deplibs=yes - ;; - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) - no_undefined_flag='${wl}-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - *) - ld_shlibs=no - ;; - esac - fi -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -$as_echo "$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes +test -z "$LN_S" && LN_S="ln -s" - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $rm conftest* - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc=no - else - archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 -$as_echo "$archive_cmds_need_lc" >&6; } - ;; - esac - fi - ;; -esac -{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -need_lib_prefix=unknown -hardcode_into_libs=no -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. - if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if test "${lt_cv_objdir+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; -freebsd1*) - dynamic_linker=no - ;; -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - freebsd*) # from 4.6 on - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac ;; +esac -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; +# Global variables: +ofile=libtool +can_build_shared=yes -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a -interix3*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; +with_gnu_ld="$lt_cv_prog_gnu_ld" -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org - # find out which ABI we are using - libsuff= - case "$host_cpu" in - x86_64*|s390x*|powerpc64*) - echo '#line 8946 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; - esac +_LT_EOF + fi ;; + esac + fi + break fi - rm -rf conftest* - ;; - esac + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" - fi +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; -knetbsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" ;; +esac +fi -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no + else + MAGIC_CMD=: fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; +fi -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH fi ;; +esac -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; +# Use C for the default configuration in the libtool script -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi +# Source file extension for C test sources. +ac_ext=c -{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var" || \ - test "X$hardcode_automatic" = "Xyes" ; then +# Object file extension for compiled C test sources. +objext=o +objext=$objext - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 -$as_echo "$hardcode_action" >&6; } +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' -striplib= -old_striplib= -{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -$as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - ;; - *) - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - darwin*) - # if libdl is installed we need to link against it - { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_dl_dlopen=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dl_dlopen=no -fi +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = x""yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes +# Allow CC to be a program name with arguments. +compiler=$CC -fi +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC - ;; +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* - *) - { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 -$as_echo_n "checking for shl_load... " >&6; } -if test "${ac_cv_func_shl_load+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then -#undef shl_load +lt_prog_compiler_no_builtin_flag= -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_shl_load || defined __stub___shl_load -choke me -#endif +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_func_shl_load=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then : + $as_echo_n "(cached) " >&6 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_shl_load=no -fi + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -$as_echo "$ac_cv_func_shl_load" >&6; } -if test "x$ac_cv_func_shl_load" = x""yes; then - lt_cv_dlopen="shl_load" -else - { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_dld_shl_load=yes +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dld_shl_load=no + : fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = x""yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" -else - { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 -$as_echo_n "checking for dlopen... " >&6; } -if test "${ac_cv_func_dlopen+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case declares dlopen. - For example, HP-UX 11i declares gettimeofday. */ -#define dlopen innocuous_dlopen -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif -#undef dlopen -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_dlopen || defined __stub___dlopen -choke me -#endif -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_func_dlopen=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_func_dlopen=no -fi + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -$as_echo "$ac_cv_func_dlopen" >&6; } -if test "x$ac_cv_func_dlopen" = x""yes; then - lt_cv_dlopen="dlopen" -else - { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_dl_dlopen=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' - ac_cv_lib_dl_dlopen=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = x""yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -$as_echo_n "checking for dlopen in -lsvld... " >&6; } -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_svld_dlopen=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; - ac_cv_lib_svld_dlopen=no -fi + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -$as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = x""yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -$as_echo_n "checking for dld_link in -ldld... " >&6; } -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_lib_dld_dld_link=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; - ac_cv_lib_dld_dld_link=no -fi + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -$as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = x""yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" -fi + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; -fi + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; -fi + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac -fi + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + lt_prog_compiler_pic='-Xcompiler -fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; -fi + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; -fi + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ F* | *Sun*Fortran*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + esac + ;; + esac + ;; - ;; - esac + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + rdos*) + lt_prog_compiler_static='-non_shared' + ;; - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; - { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -$as_echo_n "checking whether a program can dlopen itself... " >&6; } -if test "${lt_cv_dlopen_self+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; -#ifdef __cplusplus -extern "C" void exit (int); -#endif + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + *) + lt_prog_compiler_can_build_shared=no + ;; esac - else : - # compilation failed - lt_cv_dlopen_self=no fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -$as_echo "$lt_cv_dlopen_self" >&6; } - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if test "${lt_cv_dlopen_self_static+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 +$as_echo "$lt_prog_compiler_pic" >&6; } -#include -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif -#ifdef __cplusplus -extern "C" void exit (int); -#endif -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if test "${lt_cv_prog_compiler_pic_works+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi fi -rm -fr conftest* - +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -$as_echo "$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac fi -# Report which library types will actually be built -{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } -{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } -test "$can_build_shared" = "no" && enable_shared=no -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; -aix4* | aix5*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } -{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler \ - CC \ - LD \ - lt_prog_compiler_wl \ - lt_prog_compiler_pic \ - lt_prog_compiler_static \ - lt_prog_compiler_no_builtin_flag \ - export_dynamic_flag_spec \ - thread_safe_flag_spec \ - whole_archive_flag_spec \ - enable_shared_with_static_runtimes \ - old_archive_cmds \ - old_archive_from_new_cmds \ - predep_objects \ - postdep_objects \ - predeps \ - postdeps \ - compiler_lib_search_path \ - archive_cmds \ - archive_expsym_cmds \ - postinstall_cmds \ - postuninstall_cmds \ - old_archive_from_expsyms_cmds \ - allow_undefined_flag \ - no_undefined_flag \ - export_symbols_cmds \ - hardcode_libdir_flag_spec \ - hardcode_libdir_flag_spec_ld \ - hardcode_libdir_separator \ - hardcode_automatic \ - module_cmds \ - module_expsym_cmds \ - lt_cv_prog_compiler_c_o \ - exclude_expsyms \ - include_expsyms; do - - case $var in - old_archive_cmds | \ - old_archive_from_new_cmds | \ - archive_cmds | \ - archive_expsym_cmds | \ - module_cmds | \ - module_expsym_cmds | \ - old_archive_from_expsyms_cmds | \ - export_symbols_cmds | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="${ofile}T" - trap "$rm \"$cfgfile\"; exit 1" 1 2 15 - $rm -f "$cfgfile" - { $as_echo "$as_me:$LINENO: creating $ofile" >&5 -$as_echo "$as_me: creating $ofile" >&6;} - - cat <<__EOF__ >> "$cfgfile" -#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. # -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# Check to make sure the static flag actually works. # -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e 1s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test "${lt_cv_prog_compiler_static_works+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" -# The names of the tagged configurations supported by this script. -available_tags= +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } -# ### BEGIN LIBTOOL CONFIG +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared -# Whether or not to build static libraries. -build_old_libs=$enable_static -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } -# An echo program that does not interpret backslashes. -echo=$lt_echo -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS -# A C compiler. -LTCC=$lt_LTCC -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS -# A language-specific compiler. -CC=$lt_compiler -# Is the compiler the GNU C compiler? -with_gcc=$GCC + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext -gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\` -gcc_ver=\`gcc -dumpversion\` + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* -# An ERE matcher. -EGREP=$lt_EGREP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } -# The linker used to build libraries. -LD=$lt_LD -# Whether we need hard or soft links. -LN_S=$lt_LN_S -# A BSD-compatible nm program. -NM=$lt_NM -# A symbol stripping program -STRIP=$lt_STRIP +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" -# Used on cygwin: assembler. -AS="$AS" -# The name of the directory that contains temporary libtool files. -objdir=$objdir -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= -# Object file suffix (normally "o"). -objext="$ac_objext" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac -# Old archive suffix (normally "a"). -libext="$libext" + ld_shlibs=yes -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi -# Executable file suffix (normally ""). -exeext="$exeext" + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic -pic_mode=$pic_mode + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. -# Must we lock files when doing compilation? -need_locks=$lt_need_locks +_LT_EOF + fi + ;; -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; -# Do we need a version for libraries? -need_version=$need_version + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; -# Whether dlopen is supported. -dlopen_support=$enable_dlopen + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='${wl}--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag= + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; -# Library versioning type. -version_type=$version_type + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 -# Format of library name prefix. -libname_spec=$lt_libname_spec +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=\`echo $lt_predep_objects | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=\`echo $lt_postdep_objects | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=\`echo $lt_compiler_lib_search_path | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Compile-time system search path for libraries -sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='${wl}-f,' -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds + export_dynamic_flag_spec='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms +int +main () +{ -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : -# ### END LIBTOOL CONFIG +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -__EOF__ + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int +main () +{ - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; -CC="$lt_save_CC" + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes=yes + ;; -# Check whether --with-tags was given. -if test "${with_tags+set}" = set; then - withval=$with_tags; tagnames="$withval" -fi + darwin* | rhapsody*) -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 -$as_echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + else + whole_archive_flag_spec='' fi + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 -$as_echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} - else - { $as_echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 -$as_echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} - fi - fi - if test -z "$LTCFLAGS"; then - eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" + else + ld_shlibs=no fi - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + ;; - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in - "") ;; - *) { { $as_echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 -$as_echo "$as_me: error: invalid tag name: $tagname" >&2;} - { (exit 1); exit 1; }; } - ;; - esac + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - { { $as_echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 -$as_echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} - { (exit 1); exit 1; }; } - fi + freebsd1*) + ld_shlibs=no + ;; - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes -archive_cmds_need_lc_CXX=no -allow_undefined_flag_CXX= -always_export_symbols_CXX=no -archive_expsym_cmds_CXX= -export_dynamic_flag_spec_CXX= -hardcode_direct_CXX=no -hardcode_libdir_flag_spec_CXX= -hardcode_libdir_flag_spec_ld_CXX= -hardcode_libdir_separator_CXX= -hardcode_minus_L_CXX=no -hardcode_shlibpath_var_CXX=unsupported -hardcode_automatic_CXX=no -module_cmds_CXX= -module_expsym_cmds_CXX= -link_all_deplibs_CXX=unknown -old_archive_cmds_CXX=$old_archive_cmds -no_undefined_flag_CXX= -whole_archive_flag_spec_CXX= -enable_shared_with_static_runtimes_CXX=no - -# Dependencies to place before and after the object being linked: -predep_objects_CXX= -postdep_objects_CXX= -predeps_CXX= -postdeps_CXX= -compiler_lib_search_path_CXX= - -# Source file extension for C++ test sources. -ac_ext=cpp + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; -# Object file extension for compiled C++ test sources. -objext=o -objext_CXX=$objext + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld='+b $libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;\n" + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) -# Code to be used in simple link tests -lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if test "${lt_cv_prog_compiler__b+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" -# ltmain only uses $CC for tagged configurations so make sure $CC is set. +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} +if test x"$lt_cv_prog_compiler__b" = xyes; then + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: -# Allow CC to be a program name with arguments. -compiler=$CC + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -printf "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo(void) {} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' -ac_outfile=conftest.$ac_objext -printf "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm conftest* +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_LD=$LD -lt_save_GCC=$GCC -GCC=$GXX -lt_save_with_gnu_ld=$with_gnu_ld -lt_save_path_LD=$lt_cv_path_LD -if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx -else - $as_unset lt_cv_prog_gnu_ld -fi -if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX -else - $as_unset lt_cv_path_LD -fi -test -z "${LDCXX+set}" || LD=$LDCXX -CC=${CXX-"c++"} -compiler=$CC -compiler_CXX=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + *nto* | *qnx*) + ;; -# We don't want -fno-exception wen compiling C++ code, so set the -# no_builtin_flag separately -if test "$GXX" = yes; then - lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' -else - lt_prog_compiler_no_builtin_flag_CXX= -fi + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; -if test "$GXX" = yes; then - # Set up default GNU C++ configuration + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if test "${lt_cv_path_LD+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; *) - test "$with_gnu_ld" != yes && break + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi ;; esac - fi - done - IFS="$lt_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$lt_cv_path_LD" -if test -n "$LD"; then - { $as_echo "$as_me:$LINENO: result: $LD" >&5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if test "${lt_cv_prog_gnu_ld+set}" = set; then - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - - + link_all_deplibs=yes + ;; - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; - hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_CXX= - fi - else - with_gnu_ld=no - wlarc= + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; -else - GXX=no - with_gnu_ld=no - wlarc= -fi + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' -# PORTME: fill in a description of your system's C++ link characteristics -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } -ld_shlibs_CXX=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - ;; - esac + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi + *) + ld_shlibs=no + ;; + esac - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds_CXX='' - hardcode_direct_CXX=yes - hardcode_libdir_separator_CXX=':' - link_all_deplibs_CXX=yes - - if test "$GXX" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct_CXX=yes - else - # We have old collect2 - hardcode_direct_CXX=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_CXX=yes - hardcode_libdir_flag_spec_CXX='-L$libdir' - hardcode_libdir_separator_CXX= - fi + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' ;; esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi fi + fi - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols_CXX=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_CXX='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no -int -main () -{ +with_gnu_ld=$with_gnu_ld - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_CXX="-z nodefs" - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_CXX=' ${wl}-bernotok' - allow_undefined_flag_CXX=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_CXX='$convenience' - archive_cmds_need_lc_CXX=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_CXX=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_CXX=no - fi - ;; +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if test "${lt_cv_archive_cmds_need_lc+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_CXX='-L$libdir' - allow_undefined_flag_CXX=unsupported - always_export_symbols_CXX=no - enable_shared_with_static_runtimes_CXX=yes - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs_CXX=no - fi - ;; - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc_CXX=no - hardcode_direct_CXX=no - hardcode_automatic_CXX=yes - hardcode_shlibpath_var_CXX=unsupported - whole_archive_flag_spec_CXX='' - link_all_deplibs_CXX=yes - - if test "$GXX" = yes ; then - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - else - archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - fi - module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' - module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs_CXX=no - ;; - esac - fi - ;; - - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - freebsd[12]*) - # C++ shared libraries reported to be fairly broken before switch to ELF - ld_shlibs_CXX=no - ;; - freebsd-elf*) - archive_cmds_need_lc_CXX=no - ;; - freebsd* | kfreebsd*-gnu | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - ld_shlibs_CXX=yes - ;; - gnu*) - ;; - hpux9*) - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_CXX=: - export_dynamic_flag_spec_CXX='${wl}-E' - hardcode_direct_CXX=yes - hardcode_minus_L_CXX=yes # Not in the search PATH, - # but as the default - # location of the library. + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aCC*) - archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc ;; esac - ;; - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_CXX=: + fi + ;; +esac - case $host_cpu in - hppa*64*|ia64*) - hardcode_libdir_flag_spec_ld_CXX='+b $libdir' - ;; - *) - export_dynamic_flag_spec_CXX='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct_CXX=no - hardcode_shlibpath_var_CXX=no - ;; - *) - hardcode_direct_CXX=yes - hardcode_minus_L_CXX=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - interix3*) - hardcode_direct_CXX=no - hardcode_shlibpath_var_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' - fi - fi - link_all_deplibs_CXX=yes - ;; - esac - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - ;; - linux*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc*) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - archive_cmds_need_lc_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC*) - # Portland Group C++ compiler - archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_CXX='-rpath $libdir' - hardcode_libdir_separator_CXX=: - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - m88k*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - hardcode_libdir_flag_spec_CXX='-R$libdir' - hardcode_direct_CXX=yes - hardcode_shlibpath_var_CXX=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - openbsd2*) - # C++ shared libraries are fairly broken - ld_shlibs_CXX=no - ;; - openbsd*) - hardcode_direct_CXX=yes - hardcode_shlibpath_var_CXX=no - archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - export_dynamic_flag_spec_CXX='${wl}-E' - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd='echo' - ;; - osf3*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - hardcode_libdir_separator_CXX=: - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - cxx*) - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - hardcode_libdir_separator_CXX=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - cxx*) - allow_undefined_flag_CXX=' -expect_unresolved \*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ - $rm $lib.exp' - - hardcode_libdir_flag_spec_CXX='-rpath $libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - archive_cmds_need_lc_CXX=yes - no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - hardcode_libdir_flag_spec_CXX='-R$libdir' - hardcode_shlibpath_var_CXX=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The C++ compiler is used as linker so we must use $wl - # flag to pass the commands to the underlying system - # linker. We must also pass each convience library through - # to the system linker between allextract/defaultextract. - # The C++ compiler will combine linker options so we - # cannot just pass the convience library names through - # without $wl. - # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' - ;; - esac - link_all_deplibs_CXX=yes - output_verbose_link_cmd='echo' - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - # The C++ compiler must be used to create the archive. - old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - no_undefined_flag_CXX=' ${wl}-z ${wl}defs' - if $CC --version | grep -v '^2\.7' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - fi - hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' - fi - ;; - esac - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag_CXX='${wl}-z,text' - archive_cmds_need_lc_CXX=no - hardcode_shlibpath_var_CXX=no - runpath_var='LD_RUN_PATH' - case $cc_basename in - CC*) - archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - # So that behaviour is only enabled if SCOABSPATH is set to a - # non-empty value in the environment. Most likely only useful for - # creating official distributions of packages. - # This is a hack until libtool officially supports absolute path - # names for shared libraries. - no_undefined_flag_CXX='${wl}-z,text' - allow_undefined_flag_CXX='${wl}-z,nodefs' - archive_cmds_need_lc_CXX=no - hardcode_shlibpath_var_CXX=no - hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator_CXX=':' - link_all_deplibs_CXX=yes - export_dynamic_flag_spec_CXX='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - case $cc_basename in - CC*) - archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 -$as_echo "$ld_shlibs_CXX" >&6; } -test "$ld_shlibs_CXX" = no && can_build_shared=no -GCC_CXX="$GXX" -LD_CXX="$LD" -cat > conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - # The `*' in the case matches for architectures that use `case' in - # $output_verbose_cmd can trigger glob expansion during the loop - # eval without this substitution. - output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` - - for p in `eval $output_verbose_link_cmd`; do - case $p in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" \ - || test $p = "-R"; then - prev=$p - continue - else - prev= - fi - if test "$pre_test_object_deps_done" = no; then - case $p in - -L* | -R*) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$compiler_lib_search_path_CXX"; then - compiler_lib_search_path_CXX="${prev}${p}" - else - compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$postdeps_CXX"; then - postdeps_CXX="${prev}${p}" - else - postdeps_CXX="${postdeps_CXX} ${prev}${p}" - fi - fi - ;; - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - if test "$pre_test_object_deps_done" = no; then - if test -z "$predep_objects_CXX"; then - predep_objects_CXX="$p" - else - predep_objects_CXX="$predep_objects_CXX $p" - fi - else - if test -z "$postdep_objects_CXX"; then - postdep_objects_CXX="$p" - else - postdep_objects_CXX="$postdep_objects_CXX $p" - fi - fi - ;; - *) ;; # Ignore the rest. - esac - done - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling CXX test program" -fi -$rm -f confest.$objext -# PORTME: override above test on systems where it is broken -case $host_os in -interix3*) - # Interix 3.5 installs completely hosed .la files for C++, so rather than - # hack all around it, let's just trust "g++" to DTRT. - predep_objects_CXX= - postdep_objects_CXX= - postdeps_CXX= - ;; -solaris*) - case $cc_basename in - CC*) - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - postdeps_CXX='-lCstd -lCrun' - ;; - esac - ;; -esac -case " $postdeps_CXX " in -*" -lc "*) archive_cmds_need_lc_CXX=no ;; -esac -lt_prog_compiler_wl_CXX= -lt_prog_compiler_pic_CXX= -lt_prog_compiler_static_CXX= -{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='-static' - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_CXX='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | os2* | pw32*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_CXX='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_CXX='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - lt_prog_compiler_pic_CXX= - ;; - interix3*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_CXX=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - lt_prog_compiler_pic_CXX='-fPIC' - ;; - esac - ;; - *) - lt_prog_compiler_pic_CXX='-fPIC' - ;; - esac - else - case $host_os in - aix4* | aix5*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_CXX='-Bstatic' - else - lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic_CXX='-qnocommon' - lt_prog_compiler_wl_CXX='-Wl,' - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++*) - lt_prog_compiler_pic_CXX='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - lt_prog_compiler_pic_CXX='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | kfreebsd*-gnu | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then - lt_prog_compiler_pic_CXX='+Z' - fi - ;; - aCC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_CXX='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux*) - case $cc_basename in - KCC*) - # KAI C++ Compiler - lt_prog_compiler_wl_CXX='--backend -Wl,' - lt_prog_compiler_pic_CXX='-fPIC' - ;; - icpc* | ecpc*) - # Intel C++ - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-static' - ;; - pgCC*) - # Portland Group C++ compiler. - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-fpic' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX='-non_shared' - ;; - *) - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - lt_prog_compiler_pic_CXX='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - lt_prog_compiler_wl_CXX='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - lt_prog_compiler_pic_CXX='-pic' - ;; - cxx*) - # Digital/Compaq C++ - lt_prog_compiler_wl_CXX='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' - lt_prog_compiler_wl_CXX='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - lt_prog_compiler_pic_CXX='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - lt_prog_compiler_pic_CXX='-pic' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - lcc*) - # Lucid - lt_prog_compiler_pic_CXX='-pic' - ;; - *) - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - lt_prog_compiler_pic_CXX='-KPIC' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - esac - ;; - vxworks*) - ;; - *) - lt_prog_compiler_can_build_shared_CXX=no - ;; - esac - fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 -$as_echo "$lt_prog_compiler_pic_CXX" >&6; } -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_CXX"; then -{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } -if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_prog_compiler_pic_works_CXX=no - ac_outfile=conftest.$ac_objext - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:12285: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:12289: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_prog_compiler_pic_works_CXX=yes - fi - fi - $rm conftest* -fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 -$as_echo "$lt_prog_compiler_pic_works_CXX" >&6; } -if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then - case $lt_prog_compiler_pic_CXX in - "" | " "*) ;; - *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; - esac -else - lt_prog_compiler_pic_CXX= - lt_prog_compiler_can_build_shared_CXX=no -fi -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_CXX= - ;; - *) - lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" - ;; -esac -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" -{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_prog_compiler_static_works_CXX+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_prog_compiler_static_works_CXX=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - printf "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_prog_compiler_static_works_CXX=yes - fi - else - lt_prog_compiler_static_works_CXX=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" -fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5 -$as_echo "$lt_prog_compiler_static_works_CXX" >&6; } -if test x"$lt_prog_compiler_static_works_CXX" = xyes; then - : -else - lt_prog_compiler_static_CXX= -fi -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o_CXX=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:12389: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:12393: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_CXX=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix4* | aix5*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - export_symbols_cmds_CXX="$ltdll_cmds" - ;; - cygwin* | mingw*) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' - ;; - *) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 -$as_echo "$ld_shlibs_CXX" >&6; } -test "$ld_shlibs_CXX" = no && can_build_shared=no -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc_CXX" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc_CXX=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_CXX in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $rm conftest* - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_CXX - pic_flag=$lt_prog_compiler_pic_CXX - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_CXX - allow_undefined_flag_CXX= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc_CXX=no - else - archive_cmds_need_lc_CXX=yes - fi - allow_undefined_flag_CXX=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 -$as_echo "$archive_cmds_need_lc_CXX" >&6; } - ;; - esac - fi - ;; -esac -{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -need_lib_prefix=unknown -hardcode_into_libs=no -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([A-Za-z]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH @@ -12595,7 +9233,7 @@ aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no @@ -12621,9 +9259,18 @@ ;; amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac ;; beos*) @@ -12646,48 +9293,40 @@ # libtool to hard-code these into programs ;; -cygwin* | mingw* | pw32*) +cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ - $rm \$dlpath' + $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; - mingw*) + mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' @@ -12710,17 +9349,13 @@ version_type=darwin need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. - if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; @@ -12737,18 +9372,6 @@ dynamic_linker=no ;; -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. @@ -12786,7 +9409,7 @@ shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; - freebsd*) # from 4.6 on + *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; @@ -12803,6 +9426,19 @@ hardcode_into_libs=yes ;; +haiku*) + version_type=linux + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. @@ -12825,18 +9461,18 @@ fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH @@ -12845,11 +9481,13 @@ soname_spec='${libname}${release}${shared_ext}$major' ;; esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 ;; -interix3*) +interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no @@ -12904,7 +9542,7 @@ ;; # This must be Linux ELF. -linux*) +linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no @@ -12913,36 +9551,54 @@ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes - # find out which ABI we are using - libsuff= - case "$host_cpu" in - x86_64*|s390x*|powerpc64*) - echo '#line 12925 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; - esac - fi - rm -rf conftest* - ;; - esac + # Add ABI-specific directories to the system library path. + sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" + fi # We used to test for /lib/ld.so.1 and disable shared libraries on @@ -12954,23 +9610,11 @@ dynamic_linker='GNU/Linux ld.so' ;; -knetbsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - netbsd*) version_type=sunos need_lib_prefix=no need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' @@ -12991,14 +9635,16 @@ shlibpath_overrides_runpath=yes ;; -nto-qnx*) - version_type=linux +*nto* | *qnx*) + version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' ;; openbsd*) @@ -13007,13 +9653,13 @@ need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no @@ -13047,6 +9693,10 @@ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; +rdos*) + dynamic_linker=no + ;; + solaris*) version_type=linux need_lib_prefix=no @@ -13081,7 +9731,6 @@ sni) shlibpath_overrides_runpath=no need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) @@ -13112,13 +9761,12 @@ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" @@ -13128,18 +9776,29 @@ sys_lib_dlsearch_path_spec='/usr/lib' ;; -uts4*) +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux + need_lib_prefix=no + need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes ;; -*) +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) dynamic_linker=no ;; esac -{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no @@ -13148,9942 +9807,3697 @@ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action_CXX= -if test -n "$hardcode_libdir_flag_spec_CXX" || \ - test -n "$runpath_var_CXX" || \ - test "X$hardcode_automatic_CXX" = "Xyes" ; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct_CXX" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && - test "$hardcode_minus_L_CXX" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_CXX=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_CXX=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_CXX=unsupported +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi -{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 -$as_echo "$hardcode_action_CXX" >&6; } - -if test "$hardcode_action_CXX" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_CXX \ - CC_CXX \ - LD_CXX \ - lt_prog_compiler_wl_CXX \ - lt_prog_compiler_pic_CXX \ - lt_prog_compiler_static_CXX \ - lt_prog_compiler_no_builtin_flag_CXX \ - export_dynamic_flag_spec_CXX \ - thread_safe_flag_spec_CXX \ - whole_archive_flag_spec_CXX \ - enable_shared_with_static_runtimes_CXX \ - old_archive_cmds_CXX \ - old_archive_from_new_cmds_CXX \ - predep_objects_CXX \ - postdep_objects_CXX \ - predeps_CXX \ - postdeps_CXX \ - compiler_lib_search_path_CXX \ - archive_cmds_CXX \ - archive_expsym_cmds_CXX \ - postinstall_cmds_CXX \ - postuninstall_cmds_CXX \ - old_archive_from_expsyms_cmds_CXX \ - allow_undefined_flag_CXX \ - no_undefined_flag_CXX \ - export_symbols_cmds_CXX \ - hardcode_libdir_flag_spec_CXX \ - hardcode_libdir_flag_spec_ld_CXX \ - hardcode_libdir_separator_CXX \ - hardcode_automatic_CXX \ - module_cmds_CXX \ - module_expsym_cmds_CXX \ - lt_cv_prog_compiler_c_o_CXX \ - exclude_expsyms_CXX \ - include_expsyms_CXX; do - - case $var in - old_archive_cmds_CXX | \ - old_archive_from_new_cmds_CXX | \ - archive_cmds_CXX | \ - archive_expsym_cmds_CXX | \ - module_cmds_CXX | \ - module_expsym_cmds_CXX | \ - old_archive_from_expsyms_cmds_CXX | \ - export_symbols_cmds_CXX | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac -cfgfile="$ofile" - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared -# Whether or not to build static libraries. -build_old_libs=$enable_static -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_CXX -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os -# An echo program that does not interpret backslashes. -echo=$lt_echo -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS -# A C compiler. -LTCC=$lt_LTCC -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS -# A language-specific compiler. -CC=$lt_compiler_CXX -# Is the compiler the GNU C compiler? -with_gcc=$GCC_CXX -gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\` -gcc_ver=\`gcc -dumpversion\` -# An ERE matcher. -EGREP=$lt_EGREP -# The linker used to build libraries. -LD=$lt_LD_CXX -# Whether we need hard or soft links. -LN_S=$lt_LN_S -# A BSD-compatible nm program. -NM=$lt_NM -# A symbol stripping program -STRIP=$lt_STRIP -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" -# Used on cygwin: assembler. -AS="$AS" -# The name of the directory that contains temporary libtool files. -objdir=$objdir -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_CXX -# Object file suffix (normally "o"). -objext="$ac_objext" -# Old archive suffix (normally "a"). -libext="$libext" -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' -# Executable file suffix (normally ""). -exeext="$exeext" -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_CXX -pic_mode=$pic_mode -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX -# Must we lock files when doing compilation? -need_locks=$lt_need_locks -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix -# Do we need a version for libraries? -need_version=$need_version -# Whether dlopen is supported. -dlopen_support=$enable_dlopen -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_CXX -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX -# Library versioning type. -version_type=$version_type -# Format of library name prefix. -libname_spec=$lt_libname_spec -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_CXX -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_CXX -archive_expsym_cmds=$lt_archive_expsym_cmds_CXX -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_CXX -module_expsym_cmds=$lt_module_expsym_cmds_CXX -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=\`echo $lt_predep_objects_CXX | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=\`echo $lt_postdep_objects_CXX | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_CXX - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_CXX - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=\`echo $lt_compiler_lib_search_path_CXX | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_CXX -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_CXX -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address -# This is the shared library runtime path variable. -runpath_var=$runpath_var -# This is the shared library path variable. -shlibpath_var=$shlibpath_var -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_CXX -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_CXX - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_CXX - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_CXX -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_CXX -# Compile-time system search path for libraries -sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path_CXX" -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_CXX -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_CXX -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_CXX -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_CXX -# ### END LIBTOOL TAG CONFIG: $tagname -__EOF__ -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC=$lt_save_CC -LDCXX=$LD -LD=$lt_save_LD -GCC=$lt_save_GCC -with_gnu_ldcxx=$with_gnu_ld -with_gnu_ld=$lt_save_with_gnu_ld -lt_cv_path_LDCXX=$lt_cv_path_LD -lt_cv_path_LD=$lt_save_path_LD -lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld -lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld - else - tagname="" - fi - ;; - F77) - if test -n "$F77" && test "X$F77" != "Xno"; then -ac_ext=f -ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' -ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_f77_compiler_gnu - - -archive_cmds_need_lc_F77=no -allow_undefined_flag_F77= -always_export_symbols_F77=no -archive_expsym_cmds_F77= -export_dynamic_flag_spec_F77= -hardcode_direct_F77=no -hardcode_libdir_flag_spec_F77= -hardcode_libdir_flag_spec_ld_F77= -hardcode_libdir_separator_F77= -hardcode_minus_L_F77=no -hardcode_automatic_F77=no -module_cmds_F77= -module_expsym_cmds_F77= -link_all_deplibs_F77=unknown -old_archive_cmds_F77=$old_archive_cmds -no_undefined_flag_F77= -whole_archive_flag_spec_F77= -enable_shared_with_static_runtimes_F77=no -# Source file extension for f77 test sources. -ac_ext=f -# Object file extension for compiled f77 test sources. -objext=o -objext_F77=$objext + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= -# Code to be used in simple compile tests -lt_simple_compile_test_code=" subroutine t\n return\n end\n" + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; -# Code to be used in simple link tests -lt_simple_link_test_code=" program t\n end\n" + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; -# ltmain only uses $CC for tagged configurations so make sure $CC is set. + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else -# Allow CC to be a program name with arguments. -compiler=$CC + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes +fi -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -printf "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* + ;; -ac_outfile=conftest.$ac_objext -printf "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm conftest* - - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${F77-"f77"} -compiler=$CC -compiler_F77=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = x""yes; then : + lt_cv_dlopen="shl_load" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if test "${ac_cv_lib_dld_shl_load+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = x""yes; then : + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = x""yes; then : + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if test "${ac_cv_lib_svld_dlopen+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } -test "$can_build_shared" = "no" && enable_shared=no +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = x""yes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if test "${ac_cv_lib_dld_dld_link+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; -aix4* | aix5*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = x""yes; then : + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +fi -{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } -GCC_F77="$G77" -LD_F77="$LD" +fi -lt_prog_compiler_wl_F77= -lt_prog_compiler_pic_F77= -lt_prog_compiler_static_F77= -{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +fi - if test "$GCC" = yes; then - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_static_F77='-static' - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_F77='-Bstatic' - fi - ;; +fi - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; +fi - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_F77='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_F77='-fno-common' - ;; +fi - interix3*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; + ;; + esac - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared_F77=no - enable_shared=no - ;; + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_F77=-Kconform_pic - fi - ;; + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_F77='-fPIC' - ;; - esac - ;; + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - *) - lt_prog_compiler_pic_F77='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl_F77='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_F77='-Bstatic' - else - lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' - fi - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic_F77='-qnocommon' - lt_prog_compiler_wl_F77='-Wl,' - ;; - esac - ;; + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_F77='-DDLL_EXPORT' - ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if test "${lt_cv_dlopen_self+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl_F77='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_F77='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static_F77='${wl}-a ${wl}archive' - ;; +#if HAVE_DLFCN_H +#include +#endif - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl_F77='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static_F77='-non_shared' - ;; +#include - newsos6) - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - ;; +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif - linux*) - case $cc_basename in - icc* | ecc*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-fpic' - lt_prog_compiler_static_F77='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl_F77='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static_F77='-non_shared' - ;; - esac - ;; +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif - osf3* | osf4* | osf5*) - lt_prog_compiler_wl_F77='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static_F77='-non_shared' - ;; +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +void fnord () __attribute__((visibility("default"))); +#endif - solaris*) - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl_F77='-Qoption ld ';; - *) - lt_prog_compiler_wl_F77='-Wl,';; - esac - ;; +void fnord () { int i=42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; - sunos4*) - lt_prog_compiler_wl_F77='-Qoption ld ' - lt_prog_compiler_pic_F77='-PIC' - lt_prog_compiler_static_F77='-Bstatic' - ;; + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - ;; + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic_F77='-Kconform_pic' - lt_prog_compiler_static_F77='-Bstatic' - fi - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - ;; +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } - unicos*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_can_build_shared_F77=no - ;; + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if test "${lt_cv_dlopen_self_static+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" - uts4*) - lt_prog_compiler_pic_F77='-pic' - lt_prog_compiler_static_F77='-Bstatic' - ;; +#if HAVE_DLFCN_H +#include +#endif - *) - lt_prog_compiler_can_build_shared_F77=no - ;; - esac - fi +#include -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 -$as_echo "$lt_prog_compiler_pic_F77" >&6; } +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_F77"; then +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif -{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; } -if test "${lt_prog_compiler_pic_works_F77+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_prog_compiler_pic_works_F77=no - ac_outfile=conftest.$ac_objext - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_F77" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13983: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:13987: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_prog_compiler_pic_works_F77=yes - fi - fi - $rm conftest* +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +void fnord () __attribute__((visibility("default"))); +#endif -fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 -$as_echo "$lt_prog_compiler_pic_works_F77" >&6; } +void fnord () { int i=42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; -if test x"$lt_prog_compiler_pic_works_F77" = xyes; then - case $lt_prog_compiler_pic_F77 in - "" | " "*) ;; - *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; - esac -else - lt_prog_compiler_pic_F77= - lt_prog_compiler_can_build_shared_F77=no + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi fi +rm -fr conftest* + fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_F77= - ;; - *) - lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" ;; -esac + esac -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" -{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_prog_compiler_static_works_F77+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_prog_compiler_static_works_F77=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - printf "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_prog_compiler_static_works_F77=yes - fi - else - lt_prog_compiler_static_works_F77=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5 -$as_echo "$lt_prog_compiler_static_works_F77" >&6; } -if test x"$lt_prog_compiler_static_works_F77" = xyes; then - : -else - lt_prog_compiler_static_F77= -fi -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o_F77=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:14087: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:14091: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_F77=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 -$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; } -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - runpath_var= - allow_undefined_flag_F77= - enable_shared_with_static_runtimes_F77=no - archive_cmds_F77= - archive_expsym_cmds_F77= - old_archive_From_new_cmds_F77= - old_archive_from_expsyms_cmds_F77= - export_dynamic_flag_spec_F77= - whole_archive_flag_spec_F77= - thread_safe_flag_spec_F77= - hardcode_libdir_flag_spec_F77= - hardcode_libdir_flag_spec_ld_F77= - hardcode_libdir_separator_F77= - hardcode_direct_F77=no - hardcode_minus_L_F77=no - hardcode_shlibpath_var_F77=unsupported - link_all_deplibs_F77=unknown - hardcode_automatic_F77=no - module_cmds_F77= - module_expsym_cmds_F77= - always_export_symbols_F77=no - export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms_F77= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } ;; esac +fi - ld_shlibs_F77=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_F77='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_F77= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs_F77=no - cat <&2 -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. -EOF - fi - ;; - amigaos*) - archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_minus_L_F77=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs_F77=no - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_F77=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_F77=no - fi - ;; - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_F77='-L$libdir' - allow_undefined_flag_F77=unsupported - always_export_symbols_F77=no - enable_shared_with_static_runtimes_F77=yes - export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs_F77=no - fi - ;; - interix3*) - hardcode_direct_F77=no - hardcode_shlibpath_var_F77=no - hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' - export_dynamic_flag_spec_F77='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test $supports_anon_versioning = yes; then - archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - else - ld_shlibs_F77=no - fi - ;; + # Report which library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs_F77=no - cat <&2 + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_F77=no - fi - ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs_F77=no - cat <<_LT_EOF 1>&2 -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. -_LT_EOF - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' - else - ld_shlibs_F77=no - fi - ;; - esac - ;; - sunos4*) - archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - ;; +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_F77=no - fi - ;; - esac +CC="$lt_save_CC" - if test "$ld_shlibs_F77" = no; then - runpath_var= - hardcode_libdir_flag_spec_F77= - export_dynamic_flag_spec_F77= - whole_archive_flag_spec_F77= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag_F77=unsupported - always_export_symbols_F77=yes - archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L_F77=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct_F77=unsupported - fi - ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - archive_cmds_F77='' - hardcode_direct_F77=yes - hardcode_libdir_separator_F77=':' - link_all_deplibs_F77=yes - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct_F77=yes - else - # We have old collect2 - hardcode_direct_F77=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_F77=yes - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_libdir_separator_F77= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols_F77=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_F77='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF - program main - - end -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_f77_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_F77="-z nodefs" - archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF - program main - end -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_f77_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ac_config_commands="$ac_config_commands libtool" -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_F77=' ${wl}-bernotok' - allow_undefined_flag_F77=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_F77='$convenience' - archive_cmds_need_lc_F77=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - amigaos*) - archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_minus_L_F77=yes - # see comment about different semantics on the GNU ld section - ld_shlibs_F77=no - ;; +# Only expand once: - bsdi[45]*) - export_dynamic_flag_spec_F77=-rdynamic - ;; - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec_F77=' ' - allow_undefined_flag_F77=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds_F77='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path_F77='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes_F77=yes - ;; - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc_F77=no - hardcode_direct_F77=no - hardcode_automatic_F77=yes - hardcode_shlibpath_var_F77=unsupported - whole_archive_flag_spec_F77='' - link_all_deplibs_F77=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' - module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs_F77=no - ;; - esac - fi - ;; - dgux*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_shlibpath_var_F77=no - ;; - freebsd1*) - ld_shlibs_F77=no - ;; - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - ;; +OBJECT_MODE= +# Checks for programs. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking compiler flags required for compiling ANTLR with $CC C compiler on host $host" >&5 +$as_echo_n "checking compiler flags required for compiling ANTLR with $CC C compiler on host $host... " >&6; } +WARNFLAGS= +case $CC in +xlc*) + CPPCMNTFLAGS="-qcpluscmt" + if test x"$enable_64bit" = xyes; then + CCFLAGS64="-q64 -Wl,-b64" + OBJECT_MODE="64" + else + OBJECT_MODE="32" + fi + OPTIMFLAGS="-O2" + if test x"$enable_debuginfo" = xyes; then + DEBUGFLAGS="-g" + fi + ;; - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes - hardcode_minus_L_F77=yes - hardcode_shlibpath_var_F77=no - ;; +aCC*) + CPPCMNTFLAGS= + if test x"$enable_64bit" = xyes; then + CCFLAGS64="+DD64" + fi + OPTIMFLAGS="-O" + if test $DEBUGINF = 1; then + DEBUGFLAGS="-g" + fi + ;; - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu | dragonfly*) - archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - ;; +gcc*) + CPPCMNTFLAGS= + if test x"$enable_64bit" = xyes; then + GCCABIFLAGS="-m64" + else + GCCABIFLAGS="-m32" + fi + if test x"$enable_abiflags" = xyes; then + CCFLAGS64=$GCCABIFLAGS + fi + OPTIMFLAGS="-O2" + if test x"$enable_debuginfo" = xyes; then + DEBUGFLAGS="-g" + fi + WARNFLAGS=-Wall + ;; - hpux9*) - if test "$GCC" = yes; then - archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_F77=: - hardcode_direct_F77=yes +*) - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_F77=yes - export_dynamic_flag_spec_F77='${wl}-E' - ;; +case $host in +sparc*-*solaris*) + CPPCMNTFLAGS= + if test x"$enable_64bit" = xyes; then + CCFLAGS64="-fast -xtarget=ultra4 -m64 -xarch=sparcvis" + fi + OPTIMFLAGS="-O" + if test x"$enable_debuginfo" = xyes; then + DEBUGFLAGS='-g' + fi + ;; - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_F77=: +*) + CPPCMNTFLAGS= + CCFLAGS64= + OPTIMFLAGS="-O" + if test x"$enable_debuginfo" = xyes; then + DEBUGFLAGS='-g' + fi + ;; +esac - hardcode_direct_F77=yes - export_dynamic_flag_spec_F77='${wl}-E' + ;; +esac - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_F77=yes - fi - ;; +CFLAGS="$CCFLAGS64 $CPPCMNTFLAGS $OPTIMFLAGS $DEBUGFLAGS $WARNFLAGS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CFLAGS" >&5 +$as_echo "$CFLAGS" >&6; } - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_F77=: - case $host_cpu in - hppa*64*|ia64*) - hardcode_libdir_flag_spec_ld_F77='+b $libdir' - hardcode_direct_F77=no - hardcode_shlibpath_var_F77=no - ;; - *) - hardcode_direct_F77=yes - export_dynamic_flag_spec_F77='${wl}-E' +if test "x$enable_antlrdebug" = xno; then : - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_F77=yes - ;; - esac - fi - ;; +$as_echo "#define ANTLR3_NODEBUGGER 1" >>confdefs.h - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' - fi - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_F77=: - link_all_deplibs_F77=yes - ;; +fi +if test x"$enable_64bit" = xyes; then : - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - ;; +$as_echo "#define ANTLR3_USE_64BIT 1" >>confdefs.h - newsos6) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_F77=: - hardcode_shlibpath_var_F77=no - ;; +fi - openbsd*) - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' - export_dynamic_flag_spec_F77='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_F77='-R$libdir' - ;; - *) - archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - os2*) - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_minus_L_F77=yes - allow_undefined_flag_F77=unsupported - archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag_F77=' -expect_unresolved \*' - archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_F77=: - ;; +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag_F77=' -expect_unresolved \*' - archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec_F77='-rpath $libdir' - fi - hardcode_libdir_separator_F77=: - ;; +# Checks for libraries. - solaris*) - no_undefined_flag_F77=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_shlibpath_var_F77=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine linker options so we - # cannot just pass the convience library names through - # without $wl, iff we do not link with $LD. - # Luckily, gcc supports the same syntax we need for Sun Studio. - # Supported since Solaris 2.6 (maybe 2.5.1?) - case $wlarc in - '') - whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; - *) - whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; - esac ;; - esac - link_all_deplibs_F77=yes - ;; +# Checks for header files. +$ac_includes_default +for ac_header in sys/types.h netinet/in.h arpa/nameser.h netdb.h resolv.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_NETINET_IN_H +# include /* inet_ functions / structs */ +#endif +#ifdef HAVE_ARPA_NAMESER_H +# include /* DNS HEADER struct */ +#endif +#ifdef HAVE_NETDB_H +# include +#endif +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_direct_F77=yes - hardcode_minus_L_F77=yes - hardcode_shlibpath_var_F77=no - ;; +fi - sysv4) - case $host_vendor in - sni) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds_F77='$CC -r -o $output$reload_objs' - hardcode_direct_F77=no - ;; - motorola) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_F77=no - ;; +done - sysv4.3*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_F77=no - export_dynamic_flag_spec_F77='-Bexport' - ;; - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_F77=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs_F77=yes - fi - ;; +for ac_header in sys/malloc.h malloc.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "#ifdef HAVE_SYS_MALLOC_H +#include +#endif +#ifdef HAVE_MALLOC_H +#include +#endif - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) - no_undefined_flag_F77='${wl}-z,text' - archive_cmds_need_lc_F77=no - hardcode_shlibpath_var_F77=no - runpath_var='LD_RUN_PATH' +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF - if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; +fi - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag_F77='${wl}-z,text' - allow_undefined_flag_F77='${wl}-z,nodefs' - archive_cmds_need_lc_F77=no - hardcode_shlibpath_var_F77=no - hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator_F77=':' - link_all_deplibs_F77=yes - export_dynamic_flag_spec_F77='${wl}-Bexport' - runpath_var='LD_RUN_PATH' +done - if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; +for ac_header in stdarg.h +do : + ac_fn_c_check_header_compile "$LINENO" "stdarg.h" "ac_cv_header_stdarg_h" "#ifdef HAVE_STDARG_H +#include +#endif - uts4*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_shlibpath_var_F77=no - ;; +" +if test "x$ac_cv_header_stdarg_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_STDARG_H 1 +_ACEOF - *) - ld_shlibs_F77=no - ;; - esac - fi +fi -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 -$as_echo "$ld_shlibs_F77" >&6; } -test "$ld_shlibs_F77" = no && can_build_shared=no +done -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc_F77" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc_F77=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_F77 in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $rm conftest* - printf "$lt_simple_compile_test_code" > conftest.$ac_ext +for ac_header in sys/stat.h +do : + ac_fn_c_check_header_compile "$LINENO" "sys/stat.h" "ac_cv_header_sys_stat_h" "#ifdef HAVE_SYS_STAT_H +#include +#endif - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_F77 - pic_flag=$lt_prog_compiler_pic_F77 - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_F77 - allow_undefined_flag_F77= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc_F77=no - else - archive_cmds_need_lc_F77=yes - fi - allow_undefined_flag_F77=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 -$as_echo "$archive_cmds_need_lc_F77" >&6; } - ;; - esac - fi - ;; -esac +" +if test "x$ac_cv_header_sys_stat_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYS_STAT_H 1 +_ACEOF -{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi -need_lib_prefix=unknown -hardcode_into_libs=no -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown +done -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; +for ac_header in ctype.h +do : + ac_fn_c_check_header_compile "$LINENO" "ctype.h" "ac_cv_header_ctype_h" "#ifdef HAVE_CTYPE_H +#include +#endif -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; +" +if test "x$ac_cv_header_ctype_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_CTYPE_H 1 +_ACEOF -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; +fi -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; +done -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no +for ac_header in netinet/tcp.h +do : + ac_fn_c_check_header_compile "$LINENO" "netinet/tcp.h" "ac_cv_header_netinet_tcp_h" "#ifdef HAVE_NETINET_TCP_H +#include +#endif - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes +" +if test "x$ac_cv_header_netinet_tcp_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_NETINET_TCP_H 1 +_ACEOF - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; +fi - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; +done -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. - if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; +for ac_header in sys/socket.h socket.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "#ifdef HAVE_SYS_SOCKET_H +#include +#endif +#ifdef HAVE_SOCKET_H +#include +#endif -freebsd1*) - dynamic_linker=no - ;; +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; +fi -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - freebsd*) # from 4.6 on - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; +done -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; +# Checks for typedefs, structures, and compiler characteristics. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 +$as_echo_n "checking for an ANSI C-conforming const... " >&6; } +if test "${ac_cv_c_const+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -interix3*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; +int +main () +{ +/* FIXME: Include the comments suggested by Paul. */ +#ifndef __cplusplus + /* Ultrix mips cc rejects this. */ + typedef int charset[2]; + const charset cs; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; }; + struct s *b; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_const=yes +else + ac_cv_c_const=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 +$as_echo "$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes +$as_echo "#define const /**/" >>confdefs.h - # find out which ABI we are using - libsuff= - case "$host_cpu" in - x86_64*|s390x*|powerpc64*) - echo '#line 15540 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; - esac - fi - rm -rf conftest* - ;; - esac +fi - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" - fi +ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" +if test "x$ac_cv_type_size_t" = x""yes; then : - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; +else -knetbsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; +cat >>confdefs.h <<_ACEOF +#define size_t unsigned int +_ACEOF -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; +fi -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; +ac_fn_c_find_intX_t "$LINENO" "8" "ac_cv_c_int8_t" +case $ac_cv_c_int8_t in #( + no|yes) ;; #( + *) -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; +cat >>confdefs.h <<_ACEOF +#define int8_t $ac_cv_c_int8_t +_ACEOF +;; +esac -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; +ac_fn_c_find_intX_t "$LINENO" "16" "ac_cv_c_int16_t" +case $ac_cv_c_int16_t in #( + no|yes) ;; #( + *) -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; +cat >>confdefs.h <<_ACEOF +#define int16_t $ac_cv_c_int16_t +_ACEOF +;; +esac -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; +ac_fn_c_find_intX_t "$LINENO" "32" "ac_cv_c_int32_t" +case $ac_cv_c_int32_t in #( + no|yes) ;; #( + *) -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; +cat >>confdefs.h <<_ACEOF +#define int32_t $ac_cv_c_int32_t +_ACEOF +;; +esac -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; +ac_fn_c_find_intX_t "$LINENO" "64" "ac_cv_c_int64_t" +case $ac_cv_c_int64_t in #( + no|yes) ;; #( + *) -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; +cat >>confdefs.h <<_ACEOF +#define int64_t $ac_cv_c_int64_t +_ACEOF +;; +esac -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; + ac_fn_c_check_type "$LINENO" "intptr_t" "ac_cv_type_intptr_t" "$ac_includes_default" +if test "x$ac_cv_type_intptr_t" = x""yes; then : -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; +$as_echo "#define HAVE_INTPTR_T 1" >>confdefs.h -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no +else + for ac_type in 'int' 'long int' 'long long int'; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($ac_type))]; +test_array [0] = 0 -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : -{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action_F77= -if test -n "$hardcode_libdir_flag_spec_F77" || \ - test -n "$runpath_var_F77" || \ - test "X$hardcode_automatic_F77" = "Xyes" ; then +cat >>confdefs.h <<_ACEOF +#define intptr_t $ac_type +_ACEOF - # We can hardcode non-existant directories. - if test "$hardcode_direct_F77" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && - test "$hardcode_minus_L_F77" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_F77=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_F77=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_F77=unsupported + ac_type= fi -{ $as_echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 -$as_echo "$hardcode_action_F77" >&6; } - -if test "$hardcode_action_F77" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test -z "$ac_type" && break + done fi -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_F77 \ - CC_F77 \ - LD_F77 \ - lt_prog_compiler_wl_F77 \ - lt_prog_compiler_pic_F77 \ - lt_prog_compiler_static_F77 \ - lt_prog_compiler_no_builtin_flag_F77 \ - export_dynamic_flag_spec_F77 \ - thread_safe_flag_spec_F77 \ - whole_archive_flag_spec_F77 \ - enable_shared_with_static_runtimes_F77 \ - old_archive_cmds_F77 \ - old_archive_from_new_cmds_F77 \ - predep_objects_F77 \ - postdep_objects_F77 \ - predeps_F77 \ - postdeps_F77 \ - compiler_lib_search_path_F77 \ - archive_cmds_F77 \ - archive_expsym_cmds_F77 \ - postinstall_cmds_F77 \ - postuninstall_cmds_F77 \ - old_archive_from_expsyms_cmds_F77 \ - allow_undefined_flag_F77 \ - no_undefined_flag_F77 \ - export_symbols_cmds_F77 \ - hardcode_libdir_flag_spec_F77 \ - hardcode_libdir_flag_spec_ld_F77 \ - hardcode_libdir_separator_F77 \ - hardcode_automatic_F77 \ - module_cmds_F77 \ - module_expsym_cmds_F77 \ - lt_cv_prog_compiler_c_o_F77 \ - exclude_expsyms_F77 \ - include_expsyms_F77; do - - case $var in - old_archive_cmds_F77 | \ - old_archive_from_new_cmds_F77 | \ - archive_cmds_F77 | \ - archive_expsym_cmds_F77 | \ - module_cmds_F77 | \ - module_expsym_cmds_F77 | \ - old_archive_from_expsyms_cmds_F77 | \ - export_symbols_cmds_F77 | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac +ac_fn_c_find_uintX_t "$LINENO" "8" "ac_cv_c_uint8_t" +case $ac_cv_c_uint8_t in #( + no|yes) ;; #( + *) -cfgfile="$ofile" +$as_echo "#define _UINT8_T 1" >>confdefs.h - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +cat >>confdefs.h <<_ACEOF +#define uint8_t $ac_cv_c_uint8_t +_ACEOF +;; + esac -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL +ac_fn_c_find_uintX_t "$LINENO" "16" "ac_cv_c_uint16_t" +case $ac_cv_c_uint16_t in #( + no|yes) ;; #( + *) -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared -# Whether or not to build static libraries. -build_old_libs=$enable_static +cat >>confdefs.h <<_ACEOF +#define uint16_t $ac_cv_c_uint16_t +_ACEOF +;; + esac -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_F77 +ac_fn_c_find_uintX_t "$LINENO" "32" "ac_cv_c_uint32_t" +case $ac_cv_c_uint32_t in #( + no|yes) ;; #( + *) -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 +$as_echo "#define _UINT32_T 1" >>confdefs.h -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os +cat >>confdefs.h <<_ACEOF +#define uint32_t $ac_cv_c_uint32_t +_ACEOF +;; + esac -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os +ac_fn_c_find_uintX_t "$LINENO" "64" "ac_cv_c_uint64_t" +case $ac_cv_c_uint64_t in #( + no|yes) ;; #( + *) -# An echo program that does not interpret backslashes. -echo=$lt_echo +$as_echo "#define _UINT64_T 1" >>confdefs.h -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS -# A C compiler. -LTCC=$lt_LTCC +cat >>confdefs.h <<_ACEOF +#define uint64_t $ac_cv_c_uint64_t +_ACEOF +;; + esac -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS -# A language-specific compiler. -CC=$lt_compiler_F77 + ac_fn_c_check_type "$LINENO" "uintptr_t" "ac_cv_type_uintptr_t" "$ac_includes_default" +if test "x$ac_cv_type_uintptr_t" = x""yes; then : -# Is the compiler the GNU C compiler? -with_gcc=$GCC_F77 +$as_echo "#define HAVE_UINTPTR_T 1" >>confdefs.h -gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\` -gcc_ver=\`gcc -dumpversion\` +else + for ac_type in 'unsigned int' 'unsigned long int' \ + 'unsigned long long int'; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($ac_type))]; +test_array [0] = 0 -# An ERE matcher. -EGREP=$lt_EGREP + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : -# The linker used to build libraries. -LD=$lt_LD_F77 +cat >>confdefs.h <<_ACEOF +#define uintptr_t $ac_type +_ACEOF -# Whether we need hard or soft links. -LN_S=$lt_LN_S + ac_type= +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test -z "$ac_type" && break + done +fi -# A BSD-compatible nm program. -NM=$lt_NM -# A symbol stripping program -STRIP=$lt_STRIP +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 +$as_echo_n "checking for inline... " >&6; } +if test "${ac_cv_c_inline+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_c_inline=no +for ac_kw in inline __inline__ __inline; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifndef __cplusplus +typedef int foo_t; +static $ac_kw foo_t static_foo () {return 0; } +$ac_kw foo_t foo () {return 0; } +#endif -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_inline=$ac_kw +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test "$ac_cv_c_inline" != no && break +done -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 +$as_echo "$ac_cv_c_inline" >&6; } -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" +case $ac_cv_c_inline in + inline | yes) ;; + *) + case $ac_cv_c_inline in + no) ac_val=;; + *) ac_val=$ac_cv_c_inline;; + esac + cat >>confdefs.h <<_ACEOF +#ifndef __cplusplus +#define inline $ac_val +#endif +_ACEOF + ;; +esac -# Used on cygwin: assembler. -AS="$AS" -# The name of the directory that contains temporary libtool files. -objdir=$objdir -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds +# Checks for library functions. +for ac_func in memmove memset strdup accept +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_F77 +fi +done -# Object file suffix (normally "o"). -objext="$ac_objext" -# Old archive suffix (normally "a"). -libext="$libext" -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' -# Executable file suffix (normally ""). -exeext="$exeext" +ac_config_headers="$ac_config_headers antlr3config.h" -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_F77 -pic_mode=$pic_mode +ac_config_files="$ac_config_files Makefile" -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 +_ACEOF -# Must we lock files when doing compilation? -need_locks=$lt_need_locks +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache -# Whether dlopen is supported. -dlopen_support=$enable_dlopen +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self +DEFS=-DHAVE_CONFIG_H -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_F77 +LTLIBOBJS=$ac_ltlibobjs -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 +: ${CONFIG_STATUS=./config.status} +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. -# Library versioning type. -version_type=$version_type +debug=false +ac_cs_recheck=false +ac_cs_silent=false -# Format of library name prefix. -libname_spec=$lt_libname_spec +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_F77 -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_F77 -archive_expsym_cmds=$lt_archive_expsym_cmds_F77 -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_F77 -module_expsym_cmds=$lt_module_expsym_cmds_F77 +# Find who we are. Look in the path if we contain no directory separator. +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=\`echo $lt_predep_objects_F77 | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=\`echo $lt_postdep_objects_F77 | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_F77 - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_F77 - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=\`echo $lt_compiler_lib_search_path_F77 | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_F77 -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_F77 +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi -# This is the shared library runtime path variable. -runpath_var=$runpath_var +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` -# This is the shared library path variable. -shlibpath_var=$shlibpath_var +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_F77 - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_F77 - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_F77 - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_F77 -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_F77 + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" -# Compile-time system search path for libraries -sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path_F77" +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in #( + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_F77 +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_F77 +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_F77 +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_F77 +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by libantlr3c $as_me 3.4, which was +generated by GNU Autoconf 2.66. Invocation command line was -# ### END LIBTOOL TAG CONFIG: $tagname + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ -__EOF__ +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" +_ACEOF -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -CC="$lt_save_CC" +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" - else - tagname="" - fi - ;; +_ACEOF - GCJ) - if test -n "$GCJ" && test "X$GCJ" != "Xno"; then +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. +Usage: $0 [OPTION]... [TAG]... -# Source file extension for Java test sources. -ac_ext=java + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE -# Object file extension for compiled Java test sources. -objext=o -objext_GCJ=$objext +Configuration files: +$config_files -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}\n" +Configuration headers: +$config_headers -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' +Configuration commands: +$config_commands -# ltmain only uses $CC for tagged configurations so make sure $CC is set. +Report bugs to ." -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +libantlr3c config.status 3.4 +configured by $0, generated by GNU Autoconf 2.66, + with options \\"\$ac_cs_config\\" -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} +Copyright (C) 2010 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." -# Allow CC to be a program name with arguments. -compiler=$CC +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -printf "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; -ac_outfile=conftest.$ac_objext -printf "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm conftest* + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${GCJ-"gcj"} -compiler=$CC -compiler_GCJ=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; esac + shift done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -archive_cmds_need_lc_GCJ=no -old_archive_cmds_GCJ=$old_archive_cmds - - -lt_prog_compiler_no_builtin_flag_GCJ= +ac_configure_extra_args= -if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi - -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16317: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:16321: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $rm conftest* - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" -else - : +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" fi -fi +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 -lt_prog_compiler_wl_GCJ= -lt_prog_compiler_pic_GCJ= -lt_prog_compiler_static_GCJ= +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" -{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } - if test "$GCC" = yes; then - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_static_GCJ='-static' +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_GCJ='-Bstatic' - fi +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' +macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' +pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' +ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' +host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' +host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' +build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' +build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' +build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' +SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' +Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' +GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' +EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' +FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' +LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' +NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' +LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' +ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' +exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' +lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' +reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' +AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' +STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' +RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' +lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' +CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' +compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' +GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' +need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' +LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' +libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' +module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' +version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' +runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' +libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' +soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' +install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' +finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' +old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' +striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in SHELL \ +ECHO \ +SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +OBJDUMP \ +deplibs_check_method \ +file_magic_cmd \ +AR \ +AR_FLAGS \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_wl \ +lt_prog_compiler_pic \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_flag_spec_ld \ +hardcode_libdir_separator \ +fix_srcfile_path \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +install_override_mode \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; - - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; + esac +done - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; - - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; + esac +done - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_GCJ='-fno-common' - ;; +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' - interix3*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared_GCJ=no - enable_shared=no - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_GCJ=-Kconform_pic - fi - ;; + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_GCJ='-fPIC' - ;; - esac - ;; - *) - lt_prog_compiler_pic_GCJ='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl_GCJ='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_GCJ='-Bstatic' - else - lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' - fi - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic_GCJ='-qnocommon' - lt_prog_compiler_wl_GCJ='-Wl,' - ;; - esac - ;; - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' - ;; - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl_GCJ='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_GCJ='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' - ;; +_ACEOF - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl_GCJ='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static_GCJ='-non_shared' - ;; +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - newsos6) - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "antlr3config.h") CONFIG_HEADERS="$CONFIG_HEADERS antlr3config.h" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - linux*) - case $cc_basename in - icc* | ecc*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-fpic' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl_GCJ='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static_GCJ='-non_shared' - ;; - esac - ;; + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done - osf3* | osf4* | osf5*) - lt_prog_compiler_wl_GCJ='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static_GCJ='-non_shared' - ;; - solaris*) - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl_GCJ='-Qoption ld ';; - *) - lt_prog_compiler_wl_GCJ='-Wl,';; - esac - ;; +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi - sunos4*) - lt_prog_compiler_wl_GCJ='-Qoption ld ' - lt_prog_compiler_pic_GCJ='-PIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic_GCJ='-Kconform_pic' - lt_prog_compiler_static_GCJ='-Bstatic' - fi - ;; +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - unicos*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_can_build_shared_GCJ=no - ;; +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi - uts4*) - lt_prog_compiler_pic_GCJ='-pic' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; +echo 'BEGIN {' >"$tmp/subs1.awk" && +_ACEOF - *) - lt_prog_compiler_can_build_shared_GCJ=no - ;; - esac - fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 -$as_echo "$lt_prog_compiler_pic_GCJ" >&6; } +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_GCJ"; then + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh -{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; } -if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_prog_compiler_pic_works_GCJ=no - ac_outfile=conftest.$ac_objext - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_GCJ" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16585: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:16589: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_prog_compiler_pic_works_GCJ=yes - fi - fi - $rm conftest* - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 -$as_echo "$lt_prog_compiler_pic_works_GCJ" >&6; } +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" -if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then - case $lt_prog_compiler_pic_GCJ in - "" | " "*) ;; - *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; - esac -else - lt_prog_compiler_pic_GCJ= - lt_prog_compiler_can_build_shared_GCJ=no -fi +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_GCJ= - ;; - *) - lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" - ;; -esac + print line +} -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" -{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then - $as_echo_n "(cached) " >&6 +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else - lt_prog_compiler_static_works_GCJ=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - printf "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_prog_compiler_static_works_GCJ=yes - fi - else - lt_prog_compiler_static_works_GCJ=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5 -$as_echo "$lt_prog_compiler_static_works_GCJ" >&6; } + cat +fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF -if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then - : -else - lt_prog_compiler_static_GCJ= +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' fi +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o_GCJ=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16689: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:16693: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_GCJ=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 -$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; } +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_t=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_t"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi -else - need_locks=no -fi - -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - runpath_var= - allow_undefined_flag_GCJ= - enable_shared_with_static_runtimes_GCJ=no - archive_cmds_GCJ= - archive_expsym_cmds_GCJ= - old_archive_From_new_cmds_GCJ= - old_archive_from_expsyms_cmds_GCJ= - export_dynamic_flag_spec_GCJ= - whole_archive_flag_spec_GCJ= - thread_safe_flag_spec_GCJ= - hardcode_libdir_flag_spec_GCJ= - hardcode_libdir_flag_spec_ld_GCJ= - hardcode_libdir_separator_GCJ= - hardcode_direct_GCJ=no - hardcode_minus_L_GCJ=no - hardcode_shlibpath_var_GCJ=unsupported - link_all_deplibs_GCJ=unknown - hardcode_automatic_GCJ=no - module_cmds_GCJ= - module_expsym_cmds_GCJ= - always_export_symbols_GCJ=no - export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms_GCJ= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - ld_shlibs_GCJ=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_GCJ= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs_GCJ=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs_GCJ=no - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_GCJ=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_GCJ='-L$libdir' - allow_undefined_flag_GCJ=unsupported - always_export_symbols_GCJ=no - enable_shared_with_static_runtimes_GCJ=yes - export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs_GCJ=no - fi - ;; - - interix3*) - hardcode_direct_GCJ=no - hardcode_shlibpath_var_GCJ=no - hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' - export_dynamic_flag_spec_GCJ='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - linux*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test $supports_anon_versioning = yes; then - archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - else - ld_shlibs_GCJ=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs_GCJ=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs_GCJ=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - esac - - if test "$ld_shlibs_GCJ" = no; then - runpath_var= - hardcode_libdir_flag_spec_GCJ= - export_dynamic_flag_spec_GCJ= - whole_archive_flag_spec_GCJ= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag_GCJ=unsupported - always_export_symbols_GCJ=yes - archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L_GCJ=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct_GCJ=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds_GCJ='' - hardcode_direct_GCJ=yes - hardcode_libdir_separator_GCJ=':' - link_all_deplibs_GCJ=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct_GCJ=yes - else - # We have old collect2 - hardcode_direct_GCJ=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_GCJ=yes - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_libdir_separator_GCJ= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols_GCJ=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_GCJ='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_GCJ="-z nodefs" - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_GCJ=' ${wl}-bernotok' - allow_undefined_flag_GCJ=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_GCJ='$convenience' - archive_cmds_need_lc_GCJ=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - # see comment about different semantics on the GNU ld section - ld_shlibs_GCJ=no - ;; - - bsdi[45]*) - export_dynamic_flag_spec_GCJ=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec_GCJ=' ' - allow_undefined_flag_GCJ=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds_GCJ='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes_GCJ=yes - ;; - - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc_GCJ=no - hardcode_direct_GCJ=no - hardcode_automatic_GCJ=yes - hardcode_shlibpath_var_GCJ=unsupported - whole_archive_flag_spec_GCJ='' - link_all_deplibs_GCJ=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' - module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs_GCJ=no - ;; - esac - fi - ;; - - dgux*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_shlibpath_var_GCJ=no - ;; - - freebsd1*) - ld_shlibs_GCJ=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes - hardcode_minus_L_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu | dragonfly*) - archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - hpux9*) - if test "$GCC" = yes; then - archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - hardcode_direct_GCJ=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - - hardcode_direct_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' - hardcode_direct_GCJ=no - hardcode_shlibpath_var_GCJ=no - ;; - *) - hardcode_direct_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' - fi - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - link_all_deplibs_GCJ=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - newsos6) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - hardcode_shlibpath_var_GCJ=no - ;; - - openbsd*) - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' - export_dynamic_flag_spec_GCJ='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - ;; - *) - archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - allow_undefined_flag_GCJ=unsupported - archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag_GCJ=' -expect_unresolved \*' - archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag_GCJ=' -expect_unresolved \*' - archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec_GCJ='-rpath $libdir' - fi - hardcode_libdir_separator_GCJ=: - ;; - - solaris*) - no_undefined_flag_GCJ=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_shlibpath_var_GCJ=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine linker options so we - # cannot just pass the convience library names through - # without $wl, iff we do not link with $LD. - # Luckily, gcc supports the same syntax we need for Sun Studio. - # Supported since Solaris 2.6 (maybe 2.5.1?) - case $wlarc in - '') - whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; - *) - whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; - esac ;; - esac - link_all_deplibs_GCJ=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_direct_GCJ=yes - hardcode_minus_L_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds_GCJ='$CC -r -o $output$reload_objs' - hardcode_direct_GCJ=no - ;; - motorola) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_GCJ=no - ;; - - sysv4.3*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_GCJ=no - export_dynamic_flag_spec_GCJ='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_GCJ=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs_GCJ=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) - no_undefined_flag_GCJ='${wl}-z,text' - archive_cmds_need_lc_GCJ=no - hardcode_shlibpath_var_GCJ=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag_GCJ='${wl}-z,text' - allow_undefined_flag_GCJ='${wl}-z,nodefs' - archive_cmds_need_lc_GCJ=no - hardcode_shlibpath_var_GCJ=no - hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator_GCJ=':' - link_all_deplibs_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_shlibpath_var_GCJ=no - ;; - - *) - ld_shlibs_GCJ=no - ;; - esac - fi - -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 -$as_echo "$ld_shlibs_GCJ" >&6; } -test "$ld_shlibs_GCJ" = no && can_build_shared=no - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc_GCJ" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc_GCJ=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_GCJ in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $rm conftest* - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_GCJ - pic_flag=$lt_prog_compiler_pic_GCJ - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ - allow_undefined_flag_GCJ= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc_GCJ=no - else - archive_cmds_need_lc_GCJ=yes - fi - allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 -$as_echo "$archive_cmds_need_lc_GCJ" >&6; } - ;; - esac - fi - ;; -esac - -{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. - if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -kfreebsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - freebsd*) # from 4.6 on - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix3*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # find out which ABI we are using - libsuff= - case "$host_cpu" in - x86_64*|s390x*|powerpc64*) - echo '#line 18162 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *64-bit*) - libsuff=64 - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - ;; - esac - fi - rm -rf conftest* - ;; - esac - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -knetbsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action_GCJ= -if test -n "$hardcode_libdir_flag_spec_GCJ" || \ - test -n "$runpath_var_GCJ" || \ - test "X$hardcode_automatic_GCJ" = "Xyes" ; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct_GCJ" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && - test "$hardcode_minus_L_GCJ" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_GCJ=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_GCJ=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_GCJ=unsupported -fi -{ $as_echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 -$as_echo "$hardcode_action_GCJ" >&6; } - -if test "$hardcode_action_GCJ" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_GCJ \ - CC_GCJ \ - LD_GCJ \ - lt_prog_compiler_wl_GCJ \ - lt_prog_compiler_pic_GCJ \ - lt_prog_compiler_static_GCJ \ - lt_prog_compiler_no_builtin_flag_GCJ \ - export_dynamic_flag_spec_GCJ \ - thread_safe_flag_spec_GCJ \ - whole_archive_flag_spec_GCJ \ - enable_shared_with_static_runtimes_GCJ \ - old_archive_cmds_GCJ \ - old_archive_from_new_cmds_GCJ \ - predep_objects_GCJ \ - postdep_objects_GCJ \ - predeps_GCJ \ - postdeps_GCJ \ - compiler_lib_search_path_GCJ \ - archive_cmds_GCJ \ - archive_expsym_cmds_GCJ \ - postinstall_cmds_GCJ \ - postuninstall_cmds_GCJ \ - old_archive_from_expsyms_cmds_GCJ \ - allow_undefined_flag_GCJ \ - no_undefined_flag_GCJ \ - export_symbols_cmds_GCJ \ - hardcode_libdir_flag_spec_GCJ \ - hardcode_libdir_flag_spec_ld_GCJ \ - hardcode_libdir_separator_GCJ \ - hardcode_automatic_GCJ \ - module_cmds_GCJ \ - module_expsym_cmds_GCJ \ - lt_cv_prog_compiler_c_o_GCJ \ - exclude_expsyms_GCJ \ - include_expsyms_GCJ; do - - case $var in - old_archive_cmds_GCJ | \ - old_archive_from_new_cmds_GCJ | \ - archive_cmds_GCJ | \ - archive_expsym_cmds_GCJ | \ - module_cmds_GCJ | \ - module_expsym_cmds_GCJ | \ - old_archive_from_expsyms_cmds_GCJ | \ - export_symbols_cmds_GCJ | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="$ofile" - - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_GCJ - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS - -# A language-specific compiler. -CC=$lt_compiler_GCJ - -# Is the compiler the GNU C compiler? -with_gcc=$GCC_GCJ - -gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\` -gcc_ver=\`gcc -dumpversion\` - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_LD_GCJ - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$lt_STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_GCJ - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_GCJ -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_GCJ - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_GCJ -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_GCJ -archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_GCJ -module_expsym_cmds=$lt_module_expsym_cmds_GCJ - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=\`echo $lt_predep_objects_GCJ | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=\`echo $lt_postdep_objects_GCJ | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_GCJ - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_GCJ - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=\`echo $lt_compiler_lib_search_path_GCJ | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_GCJ - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_GCJ - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_GCJ - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_GCJ - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_GCJ - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_GCJ - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_GCJ - -# Compile-time system search path for libraries -sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path_GCJ" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_GCJ - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_GCJ - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_GCJ - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_GCJ - -# ### END LIBTOOL TAG CONFIG: $tagname - -__EOF__ - - -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - else - tagname="" - fi - ;; - - RC) - - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -objext_RC=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' - -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -printf "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* - -ac_outfile=conftest.$ac_objext -printf "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm conftest* - - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${RC-"windres"} -compiler=$CC -compiler_RC=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - -lt_cv_prog_compiler_c_o_RC=yes - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_RC \ - CC_RC \ - LD_RC \ - lt_prog_compiler_wl_RC \ - lt_prog_compiler_pic_RC \ - lt_prog_compiler_static_RC \ - lt_prog_compiler_no_builtin_flag_RC \ - export_dynamic_flag_spec_RC \ - thread_safe_flag_spec_RC \ - whole_archive_flag_spec_RC \ - enable_shared_with_static_runtimes_RC \ - old_archive_cmds_RC \ - old_archive_from_new_cmds_RC \ - predep_objects_RC \ - postdep_objects_RC \ - predeps_RC \ - postdeps_RC \ - compiler_lib_search_path_RC \ - archive_cmds_RC \ - archive_expsym_cmds_RC \ - postinstall_cmds_RC \ - postuninstall_cmds_RC \ - old_archive_from_expsyms_cmds_RC \ - allow_undefined_flag_RC \ - no_undefined_flag_RC \ - export_symbols_cmds_RC \ - hardcode_libdir_flag_spec_RC \ - hardcode_libdir_flag_spec_ld_RC \ - hardcode_libdir_separator_RC \ - hardcode_automatic_RC \ - module_cmds_RC \ - module_expsym_cmds_RC \ - lt_cv_prog_compiler_c_o_RC \ - exclude_expsyms_RC \ - include_expsyms_RC; do - - case $var in - old_archive_cmds_RC | \ - old_archive_from_new_cmds_RC | \ - archive_cmds_RC | \ - archive_expsym_cmds_RC | \ - module_cmds_RC | \ - module_expsym_cmds_RC | \ - old_archive_from_expsyms_cmds_RC | \ - export_symbols_cmds_RC | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="$ofile" - - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_RC - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS - -# A language-specific compiler. -CC=$lt_compiler_RC - -# Is the compiler the GNU C compiler? -with_gcc=$GCC_RC - -gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\` -gcc_ver=\`gcc -dumpversion\` - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_LD_RC - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$lt_STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_RC - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_RC -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_RC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_RC -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_RC -archive_expsym_cmds=$lt_archive_expsym_cmds_RC -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_RC -module_expsym_cmds=$lt_module_expsym_cmds_RC - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=\`echo $lt_predep_objects_RC | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=\`echo $lt_postdep_objects_RC | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_RC - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_RC - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=\`echo $lt_compiler_lib_search_path_RC | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_RC - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_RC - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_RC - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_RC - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_RC - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_RC - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_RC - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_RC - -# Compile-time system search path for libraries -sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\` - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path_RC" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_RC - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_RC - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_RC - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_RC - -# ### END LIBTOOL TAG CONFIG: $tagname - -__EOF__ - - -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - ;; - - *) - { { $as_echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 -$as_echo "$as_me: error: Unsupported tag name: $tagname" >&2;} - { (exit 1); exit 1; }; } - ;; - esac - - # Append the new tag name to the list of available tags. - if test -n "$tagname" ; then - available_tags="$available_tags $tagname" - fi - fi - done - IFS="$lt_save_ifs" - - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" - else - rm -f "${ofile}T" - { { $as_echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 -$as_echo "$as_me: error: unable to update list of available tagged configurations." >&2;} - { (exit 1); exit 1; }; } - fi -fi - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - -# Prevent multiple expansion - - - - - - - - - - - - - - - - - - - - - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} - { (exit 1); exit 1; }; } - -{ $as_echo "$as_me:$LINENO: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if test "${ac_cv_build+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -$as_echo "$as_me: error: invalid value of canonical build" >&2;} - { (exit 1); exit 1; }; };; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:$LINENO: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if test "${ac_cv_host+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} - { (exit 1); exit 1; }; } -fi - -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -$as_echo "$as_me: error: invalid value of canonical host" >&2;} - { (exit 1); exit 1; }; };; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - - -OBJECT_MODE= -# Checks for programs. -{ $as_echo "$as_me:$LINENO: checking compiler flags required for compiling ANTLR with $CC C compiler on host $host" >&5 -$as_echo_n "checking compiler flags required for compiling ANTLR with $CC C compiler on host $host... " >&6; } -WARNFLAGS= -case $CC in -xlc*) - CPPCMNTFLAGS="-qcpluscmt" - if test x"$enable_64bit" = xyes; then - CCFLAGS64="-q64 -Wl,-b64" - OBJECT_MODE="64" - else - OBJECT_MODE="32" - fi - OPTIMFLAGS="-O2" - if test x"$enable_debuginfo" = xyes; then - DEBUGFLAGS="-g" - fi - ;; - -aCC*) - CPPCMNTFLAGS= - if test x"$enable_64bit" = xyes; then - CCFLAGS64="+DD64" - fi - OPTIMFLAGS="-O" - if test $DEBUGINF = 1; then - DEBUGFLAGS="-g" - fi - ;; - -gcc*) - CPPCMNTFLAGS= - if test x"$enable_64bit" = xyes; then - GCCABIFLAGS="-m64" - else - GCCABIFLAGS="-m32" - fi - if test x"$enable_abiflags" = xyes; then - CCFLAGS64=$GCCABIFLAGS - fi - OPTIMFLAGS="-O2" - if test x"$enable_debuginfo" = xyes; then - DEBUGFLAGS="-g" - fi - WARNFLAGS=-Wall - ;; - -*) - -case $host in -sparc*-*solaris*) - CPPCMNTFLAGS= - if test x"$enable_64bit" = xyes; then - CCFLAGS64="-fast -xtarget=ultra4 -m64 -xarch=sparcvis" - fi - OPTIMFLAGS="-O" - if test x"$enable_debuginfo" = xyes; then - DEBUGFLAGS='-g' - fi - ;; - -*) - CPPCMNTFLAGS= - CCFLAGS64= - OPTIMFLAGS="-O" - if test x"$enable_debuginfo" = xyes; then - DEBUGFLAGS='-g' - fi - ;; -esac - - ;; -esac - -CFLAGS="$CCFLAGS64 $CPPCMNTFLAGS $OPTIMFLAGS $DEBUGFLAGS $WARNFLAGS" -{ $as_echo "$as_me:$LINENO: result: $CFLAGS" >&5 -$as_echo "$CFLAGS" >&6; } - - -if test "x$enable_antlrdebug" = xno; then - -cat >>confdefs.h <<\_ACEOF -#define ANTLR3_NODEBUGGER 1 -_ACEOF - -fi - -if test x"$enable_64bit" = xyes; then - -cat >>confdefs.h <<\_ACEOF -#define ANTLR3_USE_64BIT 1 -_ACEOF - -fi - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - -done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } -fi - -{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - - -# Checks for libraries. - -# Checks for header files. -$ac_includes_default - - - - - -for ac_header in sys/types.h netinet/in.h arpa/nameser.h netdb.h resolv.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_NETINET_IN_H -# include /* inet_ functions / structs */ -#endif -#ifdef HAVE_ARPA_NAMESER_H -# include /* DNS HEADER struct */ -#endif -#ifdef HAVE_NETDB_H -# include -#endif - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - -for ac_header in sys/malloc.h malloc.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef HAVE_SYS_MALLOC_H -#include -#endif -#ifdef HAVE_MALLOC_H -#include -#endif - - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in stdarg.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef HAVE_STDARG_H -#include -#endif - - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - -for ac_header in sys/stat.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef HAVE_SYS_STAT_H -#include -#endif - - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - -for ac_header in ctype.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef HAVE_CTYPE_H -#include -#endif - - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - -for ac_header in netinet/tcp.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef HAVE_NETINET_TCP_H -#include -#endif - - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - -for ac_header in sys/socket.h socket.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef HAVE_SYS_SOCKET_H -#include -#endif -#ifdef HAVE_SOCKET_H -#include -#endif - - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -# Checks for typedefs, structures, and compiler characteristics. -{ $as_echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 -$as_echo_n "checking for an ANSI C-conforming const... " >&6; } -if test "${ac_cv_c_const+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -/* FIXME: Include the comments suggested by Paul. */ -#ifndef __cplusplus - /* Ultrix mips cc rejects this. */ - typedef int charset[2]; - const charset cs; - /* SunOS 4.1.1 cc rejects this. */ - char const *const *pcpcc; - char **ppc; - /* NEC SVR4.0.2 mips cc rejects this. */ - struct point {int x, y;}; - static struct point const zero = {0,0}; - /* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in - an arm of an if-expression whose if-part is not a constant - expression */ - const char *g = "string"; - pcpcc = &g + (g ? g-g : 0); - /* HPUX 7.0 cc rejects these. */ - ++pcpcc; - ppc = (char**) pcpcc; - pcpcc = (char const *const *) ppc; - { /* SCO 3.2v4 cc rejects this. */ - char *t; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; - if (s) return 0; - } - { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; - } - { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; - } - { /* AIX XL C 1.02.0.0 rejects this saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; }; - struct s *b; b->j = 5; - } - { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; - if (!foo) return 0; - } - return !cs[0] && !zero.x; -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_c_const=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_c_const=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 -$as_echo "$ac_cv_c_const" >&6; } -if test $ac_cv_c_const = no; then - -cat >>confdefs.h <<\_ACEOF -#define const /**/ -_ACEOF - -fi - -{ $as_echo "$as_me:$LINENO: checking for size_t" >&5 -$as_echo_n "checking for size_t... " >&6; } -if test "${ac_cv_type_size_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_type_size_t=no -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof (size_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof ((size_t))) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_type_size_t=yes -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 -$as_echo "$ac_cv_type_size_t" >&6; } -if test "x$ac_cv_type_size_t" = x""yes; then - : -else - -cat >>confdefs.h <<_ACEOF -#define size_t unsigned int -_ACEOF - -fi - - - { $as_echo "$as_me:$LINENO: checking for int8_t" >&5 -$as_echo_n "checking for int8_t... " >&6; } -if test "${ac_cv_c_int8_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_c_int8_t=no - for ac_type in 'int8_t' 'int' 'long int' \ - 'long long int' 'short int' 'signed char'; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (8 - 2)) - 1) * 2 + 1))]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (8 - 2)) - 1) * 2 + 1) - < ($ac_type) (((($ac_type) 1 << (8 - 2)) - 1) * 2 + 2))]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - case $ac_type in - int8_t) ac_cv_c_int8_t=yes ;; - *) ac_cv_c_int8_t=$ac_type ;; -esac - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_int8_t" != no && break - done -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_int8_t" >&5 -$as_echo "$ac_cv_c_int8_t" >&6; } - case $ac_cv_c_int8_t in #( - no|yes) ;; #( - *) - -cat >>confdefs.h <<_ACEOF -#define int8_t $ac_cv_c_int8_t -_ACEOF -;; - esac - - - { $as_echo "$as_me:$LINENO: checking for int16_t" >&5 -$as_echo_n "checking for int16_t... " >&6; } -if test "${ac_cv_c_int16_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_c_int16_t=no - for ac_type in 'int16_t' 'int' 'long int' \ - 'long long int' 'short int' 'signed char'; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (16 - 2)) - 1) * 2 + 1))]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (16 - 2)) - 1) * 2 + 1) - < ($ac_type) (((($ac_type) 1 << (16 - 2)) - 1) * 2 + 2))]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - case $ac_type in - int16_t) ac_cv_c_int16_t=yes ;; - *) ac_cv_c_int16_t=$ac_type ;; -esac - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_int16_t" != no && break - done -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_int16_t" >&5 -$as_echo "$ac_cv_c_int16_t" >&6; } - case $ac_cv_c_int16_t in #( - no|yes) ;; #( - *) - -cat >>confdefs.h <<_ACEOF -#define int16_t $ac_cv_c_int16_t -_ACEOF -;; - esac - - - { $as_echo "$as_me:$LINENO: checking for int32_t" >&5 -$as_echo_n "checking for int32_t... " >&6; } -if test "${ac_cv_c_int32_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_c_int32_t=no - for ac_type in 'int32_t' 'int' 'long int' \ - 'long long int' 'short int' 'signed char'; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (32 - 2)) - 1) * 2 + 1))]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (32 - 2)) - 1) * 2 + 1) - < ($ac_type) (((($ac_type) 1 << (32 - 2)) - 1) * 2 + 2))]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - case $ac_type in - int32_t) ac_cv_c_int32_t=yes ;; - *) ac_cv_c_int32_t=$ac_type ;; -esac - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_int32_t" != no && break - done -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_int32_t" >&5 -$as_echo "$ac_cv_c_int32_t" >&6; } - case $ac_cv_c_int32_t in #( - no|yes) ;; #( - *) - -cat >>confdefs.h <<_ACEOF -#define int32_t $ac_cv_c_int32_t -_ACEOF -;; - esac - - - { $as_echo "$as_me:$LINENO: checking for int64_t" >&5 -$as_echo_n "checking for int64_t... " >&6; } -if test "${ac_cv_c_int64_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_c_int64_t=no - for ac_type in 'int64_t' 'int' 'long int' \ - 'long long int' 'short int' 'signed char'; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (64 - 2)) - 1) * 2 + 1))]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (64 - 2)) - 1) * 2 + 1) - < ($ac_type) (((($ac_type) 1 << (64 - 2)) - 1) * 2 + 2))]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - case $ac_type in - int64_t) ac_cv_c_int64_t=yes ;; - *) ac_cv_c_int64_t=$ac_type ;; -esac - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_int64_t" != no && break - done -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_int64_t" >&5 -$as_echo "$ac_cv_c_int64_t" >&6; } - case $ac_cv_c_int64_t in #( - no|yes) ;; #( - *) - -cat >>confdefs.h <<_ACEOF -#define int64_t $ac_cv_c_int64_t -_ACEOF -;; - esac - - - { $as_echo "$as_me:$LINENO: checking for intptr_t" >&5 -$as_echo_n "checking for intptr_t... " >&6; } -if test "${ac_cv_type_intptr_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_type_intptr_t=no -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof (intptr_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof ((intptr_t))) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_type_intptr_t=yes -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_intptr_t" >&5 -$as_echo "$ac_cv_type_intptr_t" >&6; } -if test "x$ac_cv_type_intptr_t" = x""yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_INTPTR_T 1 -_ACEOF - -else - for ac_type in 'int' 'long int' 'long long int'; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($ac_type))]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - -cat >>confdefs.h <<_ACEOF -#define intptr_t $ac_type -_ACEOF - - ac_type= -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test -z "$ac_type" && break - done -fi - - - - { $as_echo "$as_me:$LINENO: checking for uint8_t" >&5 -$as_echo_n "checking for uint8_t... " >&6; } -if test "${ac_cv_c_uint8_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_c_uint8_t=no - for ac_type in 'uint8_t' 'unsigned int' 'unsigned long int' \ - 'unsigned long long int' 'unsigned short int' 'unsigned char'; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(($ac_type) -1 >> (8 - 1) == 1)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - case $ac_type in - uint8_t) ac_cv_c_uint8_t=yes ;; - *) ac_cv_c_uint8_t=$ac_type ;; -esac - -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_uint8_t" != no && break - done -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint8_t" >&5 -$as_echo "$ac_cv_c_uint8_t" >&6; } - case $ac_cv_c_uint8_t in #( - no|yes) ;; #( - *) - -cat >>confdefs.h <<\_ACEOF -#define _UINT8_T 1 -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define uint8_t $ac_cv_c_uint8_t -_ACEOF -;; - esac - - - { $as_echo "$as_me:$LINENO: checking for uint16_t" >&5 -$as_echo_n "checking for uint16_t... " >&6; } -if test "${ac_cv_c_uint16_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_c_uint16_t=no - for ac_type in 'uint16_t' 'unsigned int' 'unsigned long int' \ - 'unsigned long long int' 'unsigned short int' 'unsigned char'; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(($ac_type) -1 >> (16 - 1) == 1)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - case $ac_type in - uint16_t) ac_cv_c_uint16_t=yes ;; - *) ac_cv_c_uint16_t=$ac_type ;; -esac - -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_uint16_t" != no && break - done -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint16_t" >&5 -$as_echo "$ac_cv_c_uint16_t" >&6; } - case $ac_cv_c_uint16_t in #( - no|yes) ;; #( - *) - - -cat >>confdefs.h <<_ACEOF -#define uint16_t $ac_cv_c_uint16_t -_ACEOF -;; - esac - - - { $as_echo "$as_me:$LINENO: checking for uint32_t" >&5 -$as_echo_n "checking for uint32_t... " >&6; } -if test "${ac_cv_c_uint32_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_c_uint32_t=no - for ac_type in 'uint32_t' 'unsigned int' 'unsigned long int' \ - 'unsigned long long int' 'unsigned short int' 'unsigned char'; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(($ac_type) -1 >> (32 - 1) == 1)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - case $ac_type in - uint32_t) ac_cv_c_uint32_t=yes ;; - *) ac_cv_c_uint32_t=$ac_type ;; -esac - -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_uint32_t" != no && break - done -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint32_t" >&5 -$as_echo "$ac_cv_c_uint32_t" >&6; } - case $ac_cv_c_uint32_t in #( - no|yes) ;; #( - *) - -cat >>confdefs.h <<\_ACEOF -#define _UINT32_T 1 -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define uint32_t $ac_cv_c_uint32_t -_ACEOF -;; - esac - - - { $as_echo "$as_me:$LINENO: checking for uint64_t" >&5 -$as_echo_n "checking for uint64_t... " >&6; } -if test "${ac_cv_c_uint64_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_c_uint64_t=no - for ac_type in 'uint64_t' 'unsigned int' 'unsigned long int' \ - 'unsigned long long int' 'unsigned short int' 'unsigned char'; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(($ac_type) -1 >> (64 - 1) == 1)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - case $ac_type in - uint64_t) ac_cv_c_uint64_t=yes ;; - *) ac_cv_c_uint64_t=$ac_type ;; -esac - -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_uint64_t" != no && break - done -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint64_t" >&5 -$as_echo "$ac_cv_c_uint64_t" >&6; } - case $ac_cv_c_uint64_t in #( - no|yes) ;; #( - *) - -cat >>confdefs.h <<\_ACEOF -#define _UINT64_T 1 -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define uint64_t $ac_cv_c_uint64_t -_ACEOF -;; - esac - - - { $as_echo "$as_me:$LINENO: checking for uintptr_t" >&5 -$as_echo_n "checking for uintptr_t... " >&6; } -if test "${ac_cv_type_uintptr_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_type_uintptr_t=no -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof (uintptr_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof ((uintptr_t))) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_type_uintptr_t=yes -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_uintptr_t" >&5 -$as_echo "$ac_cv_type_uintptr_t" >&6; } -if test "x$ac_cv_type_uintptr_t" = x""yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_UINTPTR_T 1 -_ACEOF - -else - for ac_type in 'unsigned int' 'unsigned long int' \ - 'unsigned long long int'; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($ac_type))]; -test_array [0] = 0 +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 - ; - return 0; +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" } +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - -cat >>confdefs.h <<_ACEOF -#define uintptr_t $ac_type -_ACEOF - - ac_type= -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test -z "$ac_type" && break - done -fi - - -{ $as_echo "$as_me:$LINENO: checking for inline" >&5 -$as_echo_n "checking for inline... " >&6; } -if test "${ac_cv_c_inline+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_c_inline=no -for ac_kw in inline __inline__ __inline; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifndef __cplusplus -typedef int foo_t; -static $ac_kw foo_t static_foo () {return 0; } -$ac_kw foo_t foo () {return 0; } -#endif - -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_c_inline=$ac_kw -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_inline" != no && break -done +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 -$as_echo "$ac_cv_c_inline" >&6; } + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac -case $ac_cv_c_inline in - inline | yes) ;; - *) - case $ac_cv_c_inline in - no) ac_val=;; - *) ac_val=$ac_cv_c_inline;; + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac - cat >>confdefs.h <<_ACEOF -#ifndef __cplusplus -#define inline $ac_val -#endif -_ACEOF ;; -esac - - - -# Checks for library functions. - - - - -for ac_func in memmove memset strdup accept -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -as_val=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - if test "x$as_val" = x""yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF + esac -fi -done + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -ac_config_headers="$ac_config_headers antlr3config.h" + case $ac_mode in + :F) + # + # CONFIG_FILE + # -ac_config_files="$ac_config_files Makefile" + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub _ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) $as_unset $ac_var ;; - esac ;; - esac - done +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - test "x$cache_file" != "x/dev/null" && - { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out" && rm -f "$tmp/out";; + *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" + } >"$tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi else - { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; -DEFS=-DHAVE_CONFIG_H + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs -LTLIBOBJS=$ac_ltlibobjs + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + "libtool":C) + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" -: ${CONFIG_STATUS=./config.status} -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + cat <<_LT_EOF >> "$cfgfile" #! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, +# Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# The names of the tagged configurations supported by this script. +available_tags="" -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits +# ### BEGIN LIBTOOL CONFIG -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi +# Whether or not to build static libraries. +build_old_libs=$enable_static +# What type of objects to build. +pic_mode=$pic_mode -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install -# Find who we are. Look in the path if we contain no directory separator. -case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done -IFS=$as_save_IFS +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } -fi +# An echo program that protects backslashes. +ECHO=$lt_ECHO -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -done -PS1='$ ' -PS2='> ' -PS4='+ ' +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi +# A sed program that does not truncate output. +SED=$lt_SED -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" +# A grep program that handles long lines. +GREP=$lt_GREP -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` +# An ERE matcher. +EGREP=$lt_EGREP -# CDPATH. -$as_unset CDPATH +# A literal string matcher. +FGREP=$lt_FGREP +# A BSD- or MS-compatible name lister. +NM=$lt_NM +# Whether we need soft or hard links. +LN_S=$lt_LN_S - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} +# Object file suffix (normally "o"). +objext=$ac_objext +# Executable file suffix (normally ""). +exeext=$exeext -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi +# whether the shell understands "unset". +lt_unset=$lt_unset -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in --n*) - case `echo 'x\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; - esac;; -*) - ECHO_N='-n';; -esac -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi +# An object symbol dumper. +OBJDUMP=$lt_OBJDUMP -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +# Command to use when deplibs_check_method == "file_magic". +file_magic_cmd=$lt_file_magic_cmd -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS +# A symbol stripping program. +STRIP=$lt_STRIP -exec 6>&1 +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds -# Save the log message, to keep $[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by libantlr3c $as_me 3.2, which was -generated by GNU Autoconf 2.63. Invocation command line was +# Whether to use a lock for old archive extraction. +lock_old_archive_extraction=$lock_old_archive_extraction - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ +# A C compiler. +LTCC=$lt_CC -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS -_ACEOF +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" +# The name of the directory that contains temporary libtool files. +objdir=$objdir -_ACEOF +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. +# Must we lock files when doing compilation? +need_locks=$lt_need_locks -Usage: $0 [OPTION]... [FILE]... +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT -Configuration files: -$config_files +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO -Configuration headers: -$config_headers +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL -Configuration commands: -$config_commands +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 -Report bugs to ." +# Old archive suffix (normally "a"). +libext=$libext -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_version="\\ -libantlr3c config.status 3.2 -configured by $0, generated by GNU Autoconf 2.63, - with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds -Copyright (C) 2008 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - { $as_echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; +# Do we need a version for libraries? +need_version=$need_version - # This is an error. - -*) { $as_echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; +# Library versioning type. +version_type=$version_type - *) ac_config_targets="$ac_config_targets $1" - ac_need_defaults=false ;; +# Shared library runtime path variable. +runpath_var=$runpath_var - esac - shift -done +# Shared library path variable. +shlibpath_var=$shlibpath_var -ac_configure_extra_args= +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi +# Format of library name prefix. +libname_spec=$lt_libname_spec -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" +# Permission mode override for installation of shared libraries. +install_override_mode=$lt_install_override_mode -_ACEOF +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "antlr3config.h") CONFIG_HEADERS="$CONFIG_HEADERS antlr3config.h" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self - *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= - trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. +# The linker used to build libraries. +LD=$lt_LD -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || -{ - $as_echo "$as_me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds +# A language specific compiler. +CC=$lt_compiler -ac_cr=' ' -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi +# Is the compiler the GNU compiler? +with_gcc=$GCC -echo 'BEGIN {' >"$tmp/subs1.awk" && -_ACEOF +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } -ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\).*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\).*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc - print line -} +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ - || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 -$as_echo "$as_me: error: could not setup config files machinery" >&2;} - { (exit 1); exit 1; }; } -_ACEOF +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ -s/:*$// -s/^[^=]*=[ ]*$// -}' -fi +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_t=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_t"; then - break - elif $ac_last_try; then - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} - { (exit 1); exit 1; }; } - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 -$as_echo "$as_me: error: could not setup config headers machinery" >&2;} - { (exit 1); exit 1; }; } -fi # test -n "$CONFIG_HEADERS" +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +# If ld is used when linking, flag to hardcode \$libdir into a binary +# during linking. This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 -$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} - { (exit 1); exit 1; }; };; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} - { (exit 1); exit 1; }; };; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - ac_file_inputs="$ac_file_inputs '$ac_f'" - done +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute - case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } ;; - esac +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF ;; esac - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir="$ac_dir" - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - ac_builddir=. -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix +ltmain="$ac_aux_dir/ltmain.sh" -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) - case $ac_mode in - :F) - # - # CONFIG_FILE - # + case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} + +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} + +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; esac -_ACEOF +} -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} -ac_sed_dataroot=' -/datarootdir/ { - p - q +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $* )) } -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p -' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" - rm -f "$tmp/stdin" - case $ac_file in - -) cat "$tmp/out" && rm -f "$tmp/out";; - *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; - esac \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" - } >"$tmp/config.h" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } - if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$tmp/config.h" "$ac_file" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } - fi +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ - || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 -$as_echo "$as_me: error: could not create -" >&2;} - { (exit 1); exit 1; }; } + func_dirname_result="$func_dirname_result${2}" fi -# Compute "$ac_file"'s index in $config_headers. -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - "$ac_file" | "$ac_file":* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for "$ac_file"" >`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; +} - :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "${1}" | $SED "$basename"` +} + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; esac +} +# sed scripts: +my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[^=]*=//' - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir=$dirpart/$fdir - case $as_dir in #( - -*) as_dir=./$as_dir;; +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"` +} + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$@"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF +esac + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1+=\$2" +} +_LT_EOF + ;; + *) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1=\$$1\$2" +} + +_LT_EOF + ;; esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done + + + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + ;; esac done # for ac_tag -{ (exit 0); exit 0; } +as_fn_exit 0 _ACEOF -chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || - { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. @@ -23104,10 +13518,10 @@ exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } + $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi diff -Nru libantlr3c-3.2/configure.ac libantlr3c-3.4+dfsg/configure.ac --- libantlr3c-3.2/configure.ac 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/configure.ac 2011-07-19 18:14:04.000000000 +0000 @@ -1,7 +1,7 @@ # -*- Autoconf -*- # Process this file with autoconf to produce a configure script. -AC_INIT(libantlr3c, 3.2, jimi@temporal-wave.com) +AC_INIT(libantlr3c, 3.4, jimi@temporal-wave.com) AC_PREREQ(2.60) AC_COPYRIGHT([ (The "BSD licence") diff -Nru libantlr3c-3.2/C.vcproj libantlr3c-3.4+dfsg/C.vcproj --- libantlr3c-3.2/C.vcproj 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/C.vcproj 2011-06-28 20:41:01.000000000 +0000 @@ -817,10 +817,6 @@ > - - @@ -828,10 +824,6 @@ RelativePath=".\src\antlr3treeparser.c" > - - - - @@ -991,15 +979,6 @@ RelativePath="..\..\tool\src\main\resources\org\antlr\codegen\templates\C\Dbg.stg" > - - - - Thu, 21 Jun 2018 12:38:06 +0200 + +libantlr3c (3.4+dfsg-1) experimental; urgency=medium + + * QA upload. + * New upstream release. + * Add debian/watch file. + * Update patches. + * Add 02-convert-utf.patch (Closes: #900601). + * Upgrade to debhelper compat level 11. + * Update Homepage field in debian/control. + * Convert debian/copyright to the machine-readable format. + * Upgrade to Standards-Version 4.1.4 in debian/control. + * Adjust package names according to the changed SONAME. + * Add Vcs-Git and Vcs-Browser fields in debian/control. + * Add debian/README.Debian and remove libantlr3c-dev.README.Debian. + + -- Fabian Wolff Mon, 18 Jun 2018 19:21:45 +0200 + libantlr3c (3.2-3) unstable; urgency=medium * QA upload. diff -Nru libantlr3c-3.2/debian/compat libantlr3c-3.4+dfsg/debian/compat --- libantlr3c-3.2/debian/compat 2010-06-24 13:33:50.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/compat 2018-06-16 20:18:36.000000000 +0000 @@ -1 +1 @@ -7 +11 diff -Nru libantlr3c-3.2/debian/control libantlr3c-3.4+dfsg/debian/control --- libantlr3c-3.2/debian/control 2014-08-19 08:45:49.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/control 2018-06-16 20:18:36.000000000 +0000 @@ -1,15 +1,17 @@ Source: libantlr3c Section: libs Priority: optional -Maintainer: Debian QA Group -Standards-Version: 3.9.2 -Build-Depends: debhelper (>= 8.1.3), dpkg-dev (>= 1.15.4), dh-autoreconf -Homepage: http://www.antlr.org/wiki/display/ANTLR3/ANTLR3+Code+Generation+-+C +Maintainer: Debian QA Group +Standards-Version: 4.1.4 +Build-Depends: debhelper (>= 11) +Homepage: https://www.antlr3.org/api/C/index.html +Vcs-Git: https://salsa.debian.org/debian/libantlr3c.git +Vcs-Browser: https://salsa.debian.org/debian/libantlr3c Package: libantlr3c-dev Section: libdevel Architecture: any -Depends: libantlr3c-3.2-0 (= ${binary:Version}) | libantlr3c-antlrdbg-3.2-0 (= ${binary:Version}), ${misc:Depends} +Depends: libantlr3c-3.4-0 (= ${binary:Version}) | libantlr3c-antlrdbg-3.4-0 (= ${binary:Version}), ${misc:Depends} Description: ANTLR v3 parser generator C runtime [development files] ANTLR, ANother Tool for Language Recognition, is a language tool that provides a framework for constructing recognizers, compilers, and @@ -18,8 +20,7 @@ This package contains the development files needed to build your applications using parsers generated by ANTLR in the C language. -Package: libantlr3c-3.2-0 -Section: libs +Package: libantlr3c-3.4-0 Architecture: any Multi-Arch: same Pre-Depends: ${misc:Pre-Depends} @@ -33,14 +34,13 @@ v3 in the C language, with the ANTLR debugger disabled. Install libantlr3c0-antlrdbg if you want to use the ANTLR debugger. -Package: libantlr3c-antlrdbg-3.2-0 -Section: libs +Package: libantlr3c-antlrdbg-3.4-0 Architecture: any Multi-Arch: same Pre-Depends: ${misc:Pre-Depends} Depends: ${shlibs:Depends}, ${misc:Depends} -Conflicts: libantlr3c-3.2-0 -Provides: libantlr3c-3.2-0 +Conflicts: libantlr3c-3.4-0 +Provides: libantlr3c-3.4-0 Description: ANTLR v3 parser generator C runtime with ANTLR debugger ANTLR, ANother Tool for Language Recognition, is a language tool that provides a framework for constructing recognizers, compilers, and diff -Nru libantlr3c-3.2/debian/copyright libantlr3c-3.4+dfsg/debian/copyright --- libantlr3c-3.2/debian/copyright 2011-06-13 09:59:11.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/copyright 2018-06-20 23:54:36.000000000 +0000 @@ -1,69 +1,46 @@ -This package was debianized by Julien BLACHE on -Sat, 30 May 2009 13:16:04 +0200. - -It was downloaded from - -Upstream Author: - Jim Idle - -Copyright: - Copyright (C) 2005-2009 Jim Idle, Temporal Wave LLC - -License: - Copyright (c) 2005-2009 Jim Idle, Temporal Wave LLC - http://www.temporal-wave.com - http://www.linkedin.com/in/jimidle - - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - 1. Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - 3. The name of the author may not be used to endorse or promote products - derived from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -The files include/antlr3convertutf.h and src/antlr3convertutf.c are - Copyright (C) 2001-2004 Unicode, Inc. -and distributed under the following license: - - Disclaimer - - This source code is provided as is by Unicode, Inc. No claims are - made as to fitness for any particular purpose. No warranties of any - kind are expressed or implied. The recipient agrees to determine - applicability of information provided. If this file has been - purchased on magnetic or optical media from Unicode, Inc., the - sole remedy for any claim will be exchange of defective media - within 90 days of receipt. - - Limitations on Rights to Redistribute This Code - - Unicode, Inc. hereby grants the right to freely use the information - supplied in this file in the creation of products supporting the - Unicode Standard, and to make copies of this file in any form - for internal or external distribution as long as this notice - remains attached. - - -The Debian packaging is: - - Copyright (C) 2009-2010 Julien BLACHE - -and is licensed under the GPL version 3, -see `/usr/share/common-licenses/GPL-3'. +Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ +Upstream-Name: ANTLR 3 C Runtime +Source: http://www.antlr3.org/download/C/ +Files-Excluded: include/antlr3convertutf.h src/antlr3convertutf.c +Comment: See Debian bug #900601 for the reason why those files were excluded. + +Files: * +Copyright: 2005-2009 Jim Idle, Temporal Wave LLC +License: BSD-3-clause + +Files: debian/* +Copyright: 2009-2011 Julien BLACHE + 2014 Aurelien Jarno + 2018 Fabian Wolff +License: GPL-3 + On Debian systems, the complete text of the GNU General Public License + version 3 can be found in `/usr/share/common-licenses/GPL-3'. + +Files: debian/patches/02-convert-utf.patch +Copyright: 2018 Fabian Wolff +License: BSD-3-clause + +License: BSD-3-clause + All rights reserved. + . + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + 3. The name of the author may not be used to endorse or promote products + derived from this software without specific prior written permission. + . + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff -Nru libantlr3c-3.2/debian/gbp.conf libantlr3c-3.4+dfsg/debian/gbp.conf --- libantlr3c-3.2/debian/gbp.conf 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/gbp.conf 2018-06-16 20:18:36.000000000 +0000 @@ -0,0 +1,6 @@ +[DEFAULT] +pristine-tar = True + +[import-orig] +filter = [ 'include/antlr3convertutf.h', 'src/antlr3convertutf.c' ] +filter-pristine-tar = True diff -Nru libantlr3c-3.2/debian/libantlr3c-3.2-0.install libantlr3c-3.4+dfsg/debian/libantlr3c-3.2-0.install --- libantlr3c-3.2/debian/libantlr3c-3.2-0.install 2011-06-13 10:31:16.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/libantlr3c-3.2-0.install 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -usr/lib/*/lib*.so.* diff -Nru libantlr3c-3.2/debian/libantlr3c-3.2-0.shlibs libantlr3c-3.4+dfsg/debian/libantlr3c-3.2-0.shlibs --- libantlr3c-3.2/debian/libantlr3c-3.2-0.shlibs 2010-06-24 14:04:24.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/libantlr3c-3.2-0.shlibs 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -libantlr3c-3.2 0 libantlr3c-3.2-0 | libantlr3c-antlrdbg-3.2-0 diff -Nru libantlr3c-3.2/debian/libantlr3c-3.4-0.install libantlr3c-3.4+dfsg/debian/libantlr3c-3.4-0.install --- libantlr3c-3.2/debian/libantlr3c-3.4-0.install 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/libantlr3c-3.4-0.install 2018-06-16 20:18:36.000000000 +0000 @@ -0,0 +1 @@ +usr/lib/*/lib*.so.* diff -Nru libantlr3c-3.2/debian/libantlr3c-3.4-0.shlibs libantlr3c-3.4+dfsg/debian/libantlr3c-3.4-0.shlibs --- libantlr3c-3.2/debian/libantlr3c-3.4-0.shlibs 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/libantlr3c-3.4-0.shlibs 2018-06-16 20:18:36.000000000 +0000 @@ -0,0 +1 @@ +libantlr3c-3.4 0 libantlr3c-3.4-0 | libantlr3c-antlrdbg-3.4-0 diff -Nru libantlr3c-3.2/debian/libantlr3c-antlrdbg-3.2-0.install libantlr3c-3.4+dfsg/debian/libantlr3c-antlrdbg-3.2-0.install --- libantlr3c-3.2/debian/libantlr3c-antlrdbg-3.2-0.install 2011-06-13 10:31:28.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/libantlr3c-antlrdbg-3.2-0.install 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -usr/lib/*/lib*.so.* diff -Nru libantlr3c-3.2/debian/libantlr3c-antlrdbg-3.2-0.lintian-overrides libantlr3c-3.4+dfsg/debian/libantlr3c-antlrdbg-3.2-0.lintian-overrides --- libantlr3c-3.2/debian/libantlr3c-antlrdbg-3.2-0.lintian-overrides 2010-06-24 14:05:40.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/libantlr3c-antlrdbg-3.2-0.lintian-overrides 1970-01-01 00:00:00.000000000 +0000 @@ -1,2 +0,0 @@ -libantlr3c-antlrdbg-3.2-0: package-name-doesnt-match-sonames libantlr3c-3.2-0 - diff -Nru libantlr3c-3.2/debian/libantlr3c-antlrdbg-3.2-0.shlibs libantlr3c-3.4+dfsg/debian/libantlr3c-antlrdbg-3.2-0.shlibs --- libantlr3c-3.2/debian/libantlr3c-antlrdbg-3.2-0.shlibs 2010-06-24 14:03:23.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/libantlr3c-antlrdbg-3.2-0.shlibs 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -libantlr3c-3.2 0 libantlr3c-3.2-0 | libantlr3c-antlrdbg-3.2-0 diff -Nru libantlr3c-3.2/debian/libantlr3c-antlrdbg-3.4-0.install libantlr3c-3.4+dfsg/debian/libantlr3c-antlrdbg-3.4-0.install --- libantlr3c-3.2/debian/libantlr3c-antlrdbg-3.4-0.install 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/libantlr3c-antlrdbg-3.4-0.install 2018-06-16 20:18:36.000000000 +0000 @@ -0,0 +1 @@ +usr/lib/*/lib*.so.* diff -Nru libantlr3c-3.2/debian/libantlr3c-antlrdbg-3.4-0.lintian-overrides libantlr3c-3.4+dfsg/debian/libantlr3c-antlrdbg-3.4-0.lintian-overrides --- libantlr3c-3.2/debian/libantlr3c-antlrdbg-3.4-0.lintian-overrides 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/libantlr3c-antlrdbg-3.4-0.lintian-overrides 2018-06-16 20:18:36.000000000 +0000 @@ -0,0 +1 @@ +libantlr3c-antlrdbg-3.4-0: package-name-doesnt-match-sonames libantlr3c-3.4-0 diff -Nru libantlr3c-3.2/debian/libantlr3c-antlrdbg-3.4-0.shlibs libantlr3c-3.4+dfsg/debian/libantlr3c-antlrdbg-3.4-0.shlibs --- libantlr3c-3.2/debian/libantlr3c-antlrdbg-3.4-0.shlibs 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/libantlr3c-antlrdbg-3.4-0.shlibs 2018-06-16 20:18:36.000000000 +0000 @@ -0,0 +1 @@ +libantlr3c-3.4 0 libantlr3c-3.4-0 | libantlr3c-antlrdbg-3.4-0 diff -Nru libantlr3c-3.2/debian/libantlr3c-dev.README.Debian libantlr3c-3.4+dfsg/debian/libantlr3c-dev.README.Debian --- libantlr3c-3.2/debian/libantlr3c-dev.README.Debian 2010-06-24 14:04:49.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/libantlr3c-dev.README.Debian 1970-01-01 00:00:00.000000000 +0000 @@ -1,11 +0,0 @@ -libantlr3c for Debian ---------------------- - -This package contains the development files needed to build parsers generated -by ANTLR v3 in the C language. - -The static libraries come in two flavours, libantlr3c_antlrdbg.a and -libantlr3c.a; the former has the ANTLR debugger enabled, the latter has it -disabled (and is the default). - - -- Julien BLACHE Sat, 30 May 2009 17:45:04 +0200 diff -Nru libantlr3c-3.2/debian/patches/00-debian-soname.patch libantlr3c-3.4+dfsg/debian/patches/00-debian-soname.patch --- libantlr3c-3.2/debian/patches/00-debian-soname.patch 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/patches/00-debian-soname.patch 2018-06-16 20:18:36.000000000 +0000 @@ -0,0 +1,18 @@ +Description: set a proper soname + Upstream doesn't version the ANTLR 3 C runtime (uses -avoid-version!). Use + -release X.Y -version-info 0:0:0 for the Debian packages. +Author: Julien BLACHE +Last-Update: 2018-06-15 +--- +This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ +--- a/Makefile.am ++++ b/Makefile.am +@@ -62,7 +62,7 @@ + include/antlr3treeparser.h \ + antlr3config.h + +-libantlr3c_la_LDFLAGS = -avoid-version ++libantlr3c_la_LDFLAGS = -release 3.4 -version-info 0:0:0 + + INCLUDES = -Iinclude + diff -Nru libantlr3c-3.2/debian/patches/01-fix-configure-warning.patch libantlr3c-3.4+dfsg/debian/patches/01-fix-configure-warning.patch --- libantlr3c-3.2/debian/patches/01-fix-configure-warning.patch 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/patches/01-fix-configure-warning.patch 2018-06-16 20:18:36.000000000 +0000 @@ -0,0 +1,26 @@ +Description: fix a warning in configure script + Kill AC_INCLUDES_DEFAULT() which is misused here and causes a warning + during execution of the configure script. +Author: Julien BLACHE +Last-Update: 2018-06-15 +--- +This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ +--- a/configure.ac ++++ b/configure.ac +@@ -134,7 +134,7 @@ + ;; + esac + +-CFLAGS="$CCFLAGS64 $CPPCMNTFLAGS $OPTIMFLAGS $DEBUGFLAGS $WARNFLAGS" ++CFLAGS="$CCFLAGS64 $CPPCMNTFLAGS $OPTIMFLAGS $DEBUGFLAGS $WARNFLAGS $CFLAGS" + AC_MSG_RESULT([$CFLAGS]) + AC_SUBST([OBJECT_MODE]) + +@@ -148,7 +148,6 @@ + # Checks for libraries. + + # Checks for header files. +-AC_INCLUDES_DEFAULT() + AC_HEADER_RESOLV + AC_CHECK_HEADERS([sys/malloc.h malloc.h], [], [], + [[#ifdef HAVE_SYS_MALLOC_H diff -Nru libantlr3c-3.2/debian/patches/02-convert-utf.patch libantlr3c-3.4+dfsg/debian/patches/02-convert-utf.patch --- libantlr3c-3.2/debian/patches/02-convert-utf.patch 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/patches/02-convert-utf.patch 2018-06-20 23:54:36.000000000 +0000 @@ -0,0 +1,187 @@ +Description: Add the required ConvertUTF16toUTF8 function + include/antlr3convertutf.h and src/antlr3convertutf.c had to be removed + due to licensing issues. This patch provides an alternative implementation + of ConvertUTF16toUTF8, the only function that was defined in the removed + files that is actually used in the rest of the code. +Author: Fabian Wolff +Bug: https://github.com/antlr/antlr3/issues/193 +Bug-Debian: https://bugs.debian.org/900601 +Last-Update: 2018-06-16 +--- +This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ +--- /dev/null ++++ b/include/antlr3convertutf.h +@@ -0,0 +1,61 @@ ++// [The "BSD licence"] ++// Copyright (c) 2018 Fabian Wolff ++// ++// All rights reserved. ++// ++// Redistribution and use in source and binary forms, with or without ++// modification, are permitted provided that the following conditions ++// are met: ++// 1. Redistributions of source code must retain the above copyright ++// notice, this list of conditions and the following disclaimer. ++// 2. Redistributions in binary form must reproduce the above copyright ++// notice, this list of conditions and the following disclaimer in the ++// documentation and/or other materials provided with the distribution. ++// 3. The name of the author may not be used to endorse or promote products ++// derived from this software without specific prior written permission. ++// ++// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR ++// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ++// OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ++// IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++// NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ++// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ++// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++// THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ ++#ifndef _ANTLR3_CONVERTUTF_H ++#define _ANTLR3_CONVERTUTF_H ++ ++/* This file is Debian-specific, since the upstream implementation ++ * could not be used due to licensing issues (see Debian bug #900601). ++ * A reimplementation for the ConvertUTF16toUTF8() function has been ++ * provided in src/antlr3convertutf.cc because it is used in ++ * src/antlr3string.c. However, ConvertUTF16toUTF8() _MUST NOT_ be ++ * considered part of the public API of this library. ++ */ ++ ++#include ++ ++#ifdef __cplusplus ++extern "C" ++{ ++#endif ++ ++typedef ANTLR3_UINT32 UTF32; ++typedef ANTLR3_UINT16 UTF16; ++typedef ANTLR3_UINT8 UTF8; ++ ++#define UNI_SUR_HIGH_START (UTF32)0xD800 ++#define UNI_SUR_HIGH_END (UTF32)0xDBFF ++#define UNI_SUR_LOW_START (UTF32)0xDC00 ++#define UNI_SUR_LOW_END (UTF32)0xDFFF ++#define halfShift ((UTF32)10) ++#define halfBase ((UTF32)0x0010000UL) ++ ++#ifdef __cplusplus ++} ++#endif ++ ++#endif // _ANTLR3_CONVERTUTF_H +--- /dev/null ++++ b/src/antlr3convertutf.cc +@@ -0,0 +1,47 @@ ++// [The "BSD licence"] ++// Copyright (c) 2018 Fabian Wolff ++// ++// All rights reserved. ++// ++// Redistribution and use in source and binary forms, with or without ++// modification, are permitted provided that the following conditions ++// are met: ++// 1. Redistributions of source code must retain the above copyright ++// notice, this list of conditions and the following disclaimer. ++// 2. Redistributions in binary form must reproduce the above copyright ++// notice, this list of conditions and the following disclaimer in the ++// documentation and/or other materials provided with the distribution. ++// 3. The name of the author may not be used to endorse or promote products ++// derived from this software without specific prior written permission. ++// ++// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR ++// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ++// OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ++// IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++// NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ++// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ++// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++// THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ ++#include ++#include ++#include ++#include ++ ++extern "C" void ConvertUTF16toUTF8 ( ++ const UTF16 **sourceStart, ++ const UTF16 *sourceEnd, ++ UTF8 **targetStart, ++ UTF8 *targetEnd ++ ) ++{ ++ std::u16string u16; ++ u16.insert (0, (const char16_t *) *sourceStart, (std::u16string::size_type) (sourceEnd - (*sourceStart))); ++ ++ std::string u8 = std::wstring_convert,char16_t> ().to_bytes (u16); ++ ++ for (int i = 0; i < u8.length (); ++i, (*targetStart) += 1) ++ **targetStart = u8.at (i); ++} +--- a/Makefile.am ++++ b/Makefile.am +@@ -13,7 +13,7 @@ + src/antlr3commontree.c \ + src/antlr3commontreeadaptor.c \ + src/antlr3commontreenodestream.c \ +- src/antlr3convertutf.c \ ++ src/antlr3convertutf.cc \ + src/antlr3cyclicdfa.c \ + src/antlr3debughandlers.c \ + src/antlr3encodings.c \ +--- a/configure.ac ++++ b/configure.ac +@@ -54,6 +54,7 @@ + AM_INIT_AUTOMAKE(foreign) + AC_LANG(C) + AC_PROG_CC([xlc aCC gcc cc]) ++AC_PROG_CXX([g++ c++]) + AM_MAINTAINER_MODE + AM_PROG_LIBTOOL + +--- a/src/antlr3string.c ++++ b/src/antlr3string.c +@@ -351,6 +351,13 @@ + return string->factory->newPtr(string->factory, (pANTLR3_UINT8)(string->chars), string->len); + } + ++extern void ConvertUTF16toUTF8 ( ++ const UTF16 **sourceStart, ++ const UTF16 *sourceEnd, ++ UTF8 **targetStart, ++ UTF8 *targetEnd ++ ); ++ + // Convert a UTF16 string into a UTF8 representation using the Unicode.org + // supplied C algorithms, which are now contained within the ANTLR3 C runtime + // as permitted by the Unicode license (within the source code antlr3convertutf.c/.h +@@ -364,8 +371,6 @@ + UTF16 * inputEnd; + pANTLR3_STRING utf8String; + +- ConversionResult cResult; +- + // Allocate the output buffer, which needs to accommodate potentially + // 3X (in bytes) the input size (in chars). + // +@@ -389,13 +394,12 @@ + + // Call the Unicode converter + // +- cResult = ConvertUTF16toUTF8 ++ ConvertUTF16toUTF8 + ( + (const UTF16**)&inputEnd, + ((const UTF16 *)(string->chars)) + string->len, + &outputEnd, +- outputEnd + utf8String->size - 1, +- lenientConversion ++ outputEnd + utf8String->size - 1 + ); + + // We don't really care if things failed or not here, we just converted diff -Nru libantlr3c-3.2/debian/patches/debian_soname.patch libantlr3c-3.4+dfsg/debian/patches/debian_soname.patch --- libantlr3c-3.2/debian/patches/debian_soname.patch 2010-06-24 14:25:30.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/patches/debian_soname.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,31 +0,0 @@ -Description: set a proper soname - Upstream doesn't version the ANTLR 3 C runtime (uses -avoid-version!). Use - -release X.Y -version-info 0:0:0 for the Debian packages. -Author: Julien BLACHE - -Index: libantlr3c-3.2/Makefile.am -=================================================================== ---- libantlr3c-3.2.orig/Makefile.am 2010-06-24 16:16:00.000000000 +0200 -+++ libantlr3c-3.2/Makefile.am 2010-06-24 16:16:13.000000000 +0200 -@@ -65,7 +65,7 @@ - include/antlr3treeparser.h \ - antlr3config.h - --libantlr3c_la_LDFLAGS = -avoid-version -+libantlr3c_la_LDFLAGS = -release 3.2 -version-info 0:0:0 - - INCLUDES = -Iinclude - -Index: libantlr3c-3.2/Makefile.in -=================================================================== ---- libantlr3c-3.2.orig/Makefile.in 2010-06-24 16:15:22.000000000 +0200 -+++ libantlr3c-3.2/Makefile.in 2010-06-24 16:15:58.000000000 +0200 -@@ -272,7 +272,7 @@ - include/antlr3treeparser.h \ - antlr3config.h - --libantlr3c_la_LDFLAGS = -avoid-version -+libantlr3c_la_LDFLAGS = -release 3.2 -version-info 0:0:0 - INCLUDES = -Iinclude - EXTRA_DIST = \ - vsrulefiles/antlr3lexerandparser.rules \ diff -Nru libantlr3c-3.2/debian/patches/fix_configure_warning.patch libantlr3c-3.4+dfsg/debian/patches/fix_configure_warning.patch --- libantlr3c-3.2/debian/patches/fix_configure_warning.patch 2010-06-24 14:28:06.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/patches/fix_configure_warning.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,30 +0,0 @@ -Description: fix a warning in configure script - Kill AC_INCLUDES_DEFAULT() which is misused here and causes a warning - during execution of the configure script. -Author: Julien BLACHE - -Index: libantlr3c-3.2/configure -=================================================================== ---- libantlr3c-3.2.orig/configure 2010-06-24 16:22:24.000000000 +0200 -+++ libantlr3c-3.2/configure 2010-06-24 16:22:30.000000000 +0200 -@@ -19704,7 +19704,7 @@ - # Checks for libraries. - - # Checks for header files. --$ac_includes_default -+ - - - -Index: libantlr3c-3.2/configure.ac -=================================================================== ---- libantlr3c-3.2.orig/configure.ac 2010-06-24 16:22:13.000000000 +0200 -+++ libantlr3c-3.2/configure.ac 2010-06-24 16:22:20.000000000 +0200 -@@ -148,7 +148,6 @@ - # Checks for libraries. - - # Checks for header files. --AC_INCLUDES_DEFAULT() - AC_HEADER_RESOLV - AC_CHECK_HEADERS([sys/malloc.h malloc.h], [], [], - [[#ifdef HAVE_SYS_MALLOC_H diff -Nru libantlr3c-3.2/debian/patches/series libantlr3c-3.4+dfsg/debian/patches/series --- libantlr3c-3.2/debian/patches/series 2010-06-24 14:22:08.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/patches/series 2018-06-16 20:18:36.000000000 +0000 @@ -1,2 +1,3 @@ -debian_soname.patch -fix_configure_warning.patch +00-debian-soname.patch +01-fix-configure-warning.patch +02-convert-utf.patch diff -Nru libantlr3c-3.2/debian/README.Debian libantlr3c-3.4+dfsg/debian/README.Debian --- libantlr3c-3.2/debian/README.Debian 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/README.Debian 2018-06-20 23:54:36.000000000 +0000 @@ -0,0 +1,26 @@ +libantlr3c for Debian +--------------------- + +Please note that the files + + include/antlr3convertutf.h + src/antlr3convertutf.c + +have been removed (along with the functionality which they +implemented) from the upstream tarball due to license problems. For +more information, please refer to + + https://bugs.debian.org/900601 + https://bugs.debian.org/823100 + + -- Fabian Wolff Mon, 18 Jun 2018 17:19:08 +0200 + + +The libantlr3c-dev package contains the development files needed to +build parsers generated by ANTLR v3 in the C language. + +The static libraries come in two flavours, libantlr3c_antlrdbg.a and +libantlr3c.a; the former has the ANTLR debugger enabled, the latter has it +disabled (and is the default). + + -- Julien BLACHE Sat, 30 May 2009 17:45:04 +0200 diff -Nru libantlr3c-3.2/debian/rules libantlr3c-3.4+dfsg/debian/rules --- libantlr3c-3.2/debian/rules 2014-08-19 08:45:49.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/rules 2018-06-16 20:18:36.000000000 +0000 @@ -1,110 +1,52 @@ #!/usr/bin/make -f -# -*- makefile -*- -# Sample debian/rules that uses debhelper. -# This file was originally written by Joey Hess and Craig Small. -# As a special exception, when this file is copied by dh-make into a -# dh-make output file, you may use that output file without restriction. -# This special exception was added by Craig Small in version 0.37 of dh-make. # Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 +# export DH_VERBOSE=1 +include /usr/share/dpkg/architecture.mk -# These are used for cross-compiling and for saving the configure script -# from having to guess our platform (since we know it already) -DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) -DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) -ifneq ($(DEB_HOST_GNU_TYPE),$(DEB_BUILD_GNU_TYPE)) -CROSS= --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE) -else -CROSS= --build $(DEB_BUILD_GNU_TYPE) -endif +export DEB_BUILD_MAINT_OPTIONS = hardening=+all -DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH) -DEB_HOST_ARCH_BITS ?= $(shell dpkg-architecture -qDEB_HOST_ARCH_BITS) ifeq ($(DEB_HOST_ARCH_BITS),64) -ENABLE_64BIT = --enable-64bit + ENABLE_64BIT = --enable-64bit endif -configure: configure-stamp -configure-stamp: - dh_testdir - dh_autoreconf +%: + dh $@ + +override_dh_auto_configure: # Configure with ANTLR remote debugger enabled mkdir build-dbg - ( cd build-dbg; \ - ../configure $(CROSS) --prefix=/usr --libdir=\$${prefix}/lib/$(DEB_HOST_MULTIARCH) \ - --enable-debuginfo --disable-abiflags --enable-antlrdebug $(ENABLE_64BIT); \ + ( cd build-dbg; \ + ../configure $(CROSS) --prefix=/usr \ + --libdir=\$${prefix}/lib/$(DEB_HOST_MULTIARCH) \ + --enable-debuginfo --disable-abiflags --enable-antlrdebug \ + $(ENABLE_64BIT); \ ln -s ../include ) # Configure with ANTLR remote debugger disabled mkdir build-nodbg - ( cd build-nodbg; \ - ../configure $(CROSS) --prefix=/usr --libdir=\$${prefix}/lib/$(DEB_HOST_MULTIARCH) \ - --enable-debuginfo --disable-abiflags --disable-antlrdebug $(ENABLE_64BIT); \ - ln -s ../include ) + ( cd build-nodbg; \ + ../configure $(CROSS) --prefix=/usr \ + --libdir=\$${prefix}/lib/$(DEB_HOST_MULTIARCH) \ + --enable-debuginfo --disable-abiflags --disable-antlrdebug \ + $(ENABLE_64BIT); \ + ln -s ../include ) - touch configure-stamp - -build: build-stamp -build-stamp: configure-stamp - dh_testdir - - # Add here commands to compile the package. +override_dh_auto_build: ( cd build-dbg; $(MAKE) ) ( cd build-nodbg; $(MAKE) ) - touch $@ - -clean: - dh_testdir - dh_testroot - rm -f configure-stamp build-stamp - - # Add here commands to clean up after the build process. +override_dh_auto_clean: rm -rf build-dbg debian/tmp-dbg rm -rf build-nodbg - dh_autoreconf_clean - - dh_clean - -install: build - dh_testdir - dh_testroot - dh_prep - dh_installdirs - - # Add here commands to install the package into debian/tmp +override_dh_auto_install: ( cd build-dbg; $(MAKE) DESTDIR=$(CURDIR)/debian/tmp-dbg install ) ( cd build-nodbg; $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install ) - cp debian/tmp-dbg/usr/lib/$(DEB_HOST_MULTIARCH)/libantlr3c.a \ debian/tmp/usr/lib/$(DEB_HOST_MULTIARCH)/libantlr3c_antlrdbg.a -# Build architecture-independent files here. -binary-indep: install -# Nothing to do here. - -# Build architecture-dependent files here. -binary-arch: install - dh_testdir - dh_testroot - dh_installchangelogs ChangeLog - dh_lintian - dh_installdocs - dh_install --sourcedir=debian/tmp -Nlibantlr3c-antlrdbg-3.2-0 - dh_install --sourcedir=debian/tmp-dbg -plibantlr3c-antlrdbg-3.2-0 - dh_link - dh_strip - dh_compress - dh_fixperms - dh_makeshlibs - dh_installdeb - dh_shlibdeps - dh_gencontrol - dh_md5sums - dh_builddeb - -binary: binary-indep binary-arch -.PHONY: build clean binary-indep binary-arch binary install +override_dh_install: + dh_install --sourcedir=debian/tmp -Nlibantlr3c-antlrdbg-3.4-0 + dh_install --sourcedir=debian/tmp-dbg -plibantlr3c-antlrdbg-3.4-0 diff -Nru libantlr3c-3.2/debian/watch libantlr3c-3.4+dfsg/debian/watch --- libantlr3c-3.2/debian/watch 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/debian/watch 2018-06-16 20:18:36.000000000 +0000 @@ -0,0 +1,2 @@ +version=4 +opts="dversionmangle=s/\+dfsg\d*$//" https://www.antlr3.org/download/C/ libantlr3c-([\.\d]+)\.tar\.gz diff -Nru libantlr3c-3.2/depcomp libantlr3c-3.4+dfsg/depcomp --- libantlr3c-3.2/depcomp 2009-12-11 22:55:09.000000000 +0000 +++ libantlr3c-3.4+dfsg/depcomp 2011-07-19 18:14:25.000000000 +0000 @@ -1,9 +1,10 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2005-07-09.11 +scriptversion=2009-04-28.21; # UTC -# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free +# Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -16,9 +17,7 @@ # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -86,12 +85,34 @@ depmode=dashmstdout fi +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u="sed s,\\\\\\\\,/,g" + depmode=msvisualcpp +fi + case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. - "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" stat=$? if test $stat -eq 0; then : else @@ -178,14 +199,14 @@ ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' -' ' ' >> $depfile - echo >> $depfile +' ' ' >> "$depfile" + echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> $depfile + >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile @@ -201,34 +222,39 @@ # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. - stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` - tmpdepfile="$stripped.u" + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u "$@" -M fi stat=$? - if test -f "$tmpdepfile"; then : - else - stripped=`echo "$stripped" | sed 's,^.*/,,'` - tmpdepfile="$stripped.u" - fi - if test $stat -eq 0; then : else - rm -f "$tmpdepfile" + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done if test -f "$tmpdepfile"; then - outname="$stripped.o" # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" - sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile @@ -276,6 +302,51 @@ rm -f "$tmpdepfile" ;; +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add `dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. @@ -288,13 +359,13 @@ if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a - # static library. This mecanism is used in libtool 1.4 series to + # static library. This mechanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in in $dir.libs/$base.o.d and + # compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is @@ -345,7 +416,7 @@ # Remove the call to Libtool. if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift @@ -396,32 +467,39 @@ "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift - cleared=no - for arg in "$@"; do + cleared=no eat=no + for arg + do case $cleared in no) set ""; shift cleared=yes ;; esac + if test $eat = yes; then + eat=no + continue + fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done - obj_suffix="`echo $object | sed 's/^.*\././'`" + obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" @@ -441,7 +519,7 @@ # Remove the call to Libtool. if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift @@ -479,13 +557,27 @@ msvisualcpp) # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. + # always write the preprocessed file to stdout. "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + IFS=" " for arg do case "$arg" in + -o) + shift + ;; + $object) + shift + ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift @@ -498,16 +590,23 @@ ;; esac done - "$@" -E | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + none) exec "$@" ;; @@ -526,5 +625,6 @@ # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: diff -Nru libantlr3c-3.2/doxyfile libantlr3c-3.4+dfsg/doxyfile --- libantlr3c-3.2/doxyfile 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/doxyfile 2011-06-22 22:32:15.000000000 +0000 @@ -1,16 +1,91 @@ -# Doxyfile 1.5.2 +# Doxyfile 1.7.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + PROJECT_NAME = ANTLR3C -PROJECT_NUMBER = 3.1.2 + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = 3.3.1 + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + OUTPUT_DIRECTORY = api + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + ABBREVIATE_BRIEF = "The $name class" \ "The $name widget" \ "The $name file" \ @@ -22,71 +97,518 @@ a \ an \ the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + JAVADOC_AUTOBRIEF = YES + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + MULTILINE_CPP_IS_BRIEF = NO -DETAILS_AT_TOP = YES + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this +# tag. The format is ext=language, where ext is a file extension, and language +# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, +# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make +# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C +# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions +# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen to replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + SUBGROUPING = YES + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penality. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will rougly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols + +SYMBOL_CACHE_SIZE = 0 + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + EXTRACT_PRIVATE = YES + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespace are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + SHOW_INCLUDE_FILES = YES + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation +# rather than with sharp brackets. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + SORT_BRIEF_DOCS = YES + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen +# will sort the (brief and detailed) documentation of class members so that +# constructors and destructors are listed first. If set to NO (the default) +# the constructors will appear in the respective orders defined by +# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. +# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO +# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + SHOW_DIRECTORIES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. The create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. +# You can optionally specify a file name after the option, if omitted +# DoxygenLayout.xml will be used as the name of the layout file. + +LAYOUT_FILE = + #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + WARN_NO_PARAMDOC = YES + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + WARN_LOGFILE = docwarn.txt + #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + INPUT = src \ include \ doxygen + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 + FILE_PATTERNS = *.c \ *.cc \ *.cxx \ @@ -114,152 +636,1024 @@ *.mm \ *.dox \ *.py + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded +# from the input. + EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. + INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + FILTER_SOURCE_FILES = NO + #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + REFERENCED_BY_RELATION = YES + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + REFERENCES_RELATION = YES + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. Otherwise they will link to the documentation. + REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + VERBATIM_HEADERS = NO + #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + ALPHABETICAL_INDEX = YES + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + IGNORE_PREFIX = + #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + HTML_OUTPUT = . + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + HTML_STYLESHEET = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. +# Doxygen will adjust the colors in the stylesheet and background images +# according to this color. Hue is specified as an angle on a colorwheel, +# see http://en.wikipedia.org/wiki/Hue for more information. +# For instance the value 0 represents red, 60 is yellow, 120 is green, +# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. +# The allowed range is 0 to 359. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of +# the colors in the HTML output. For a value of 0 the output will use +# grayscales only. A value of 255 will produce the most vivid colors. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to +# the luminance component of the colors in the HTML output. Values below +# 100 gradually make the output lighter, whereas values above 100 make +# the output darker. The value divided by 100 is the actual gamma applied, +# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, +# and 100 does not change the gamma. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting +# this to NO can help when comparing the output of multiple runs. + +HTML_TIMESTAMP = YES + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + HTML_ALIGN_MEMBERS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = NO + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated +# that can be used as input for Qt's qhelpgenerator to generate a +# Qt Compressed Help (.qch) of the generated HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to +# add. For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see +# +# Qt Help Project / Custom Filters. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's +# filter section matches. +# +# Qt Help Project / Filter Attributes. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before +# the help appears. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have +# this name. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + ENUM_VALUES_PER_LINE = 4 + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. + GENERATE_TREEVIEW = YES + +# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, +# and Class Hierarchy pages using a tree view instead of an ordered list. + +USE_INLINE_TREES = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + TREEVIEW_WIDTH = 300 + +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open +# links to external symbols imported via tag files in a separate window. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are +# not supported properly for IE 6.0, but are supported on all modern browsers. +# Note that when changing this option you need to delete any form_*.png files +# in the HTML output before the changes have effect. + +FORMULA_TRANSPARENT = YES + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box +# for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using +# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets +# (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine +# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. + +SEARCHENGINE = NO + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a PHP enabled web server instead of at the web client +# using Javascript. Doxygen will generate the search PHP script and index +# file to put on the web server. The advantage of the server +# based approach is that it scales better to large projects and allows +# full text search. The disadvances is that it is more difficult to setup +# and does not have live searching capabilities. + +SERVER_BASED_SEARCH = NO + #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the +# Makefile that is written to the output directory. + LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + PDF_HYPERLINKS = NO + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + USE_PDFLATEX = NO + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include +# source code with syntax highlighting in the LaTeX output. +# Note that which sources are shown also depends on other settings +# such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + RTF_EXTENSIONS_FILE = + #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + GENERATE_MAN = YES + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + MAN_LINKS = YES + #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + XML_PROGRAMLISTING = YES + #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + GENERATE_AUTOGEN_DEF = NO + #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + PERLMOD_MAKEVAR_PREFIX = + #--------------------------------------------------------------------------- -# Configuration options related to the preprocessor +# Configuration options related to the preprocessor #--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse +# the parser if not removed. + SKIP_FUNCTION_MACROS = YES + #--------------------------------------------------------------------------- -# Configuration::additions related to external references +# Configuration::additions related to external references #--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + PERL_PATH = /usr/bin/perl + #--------------------------------------------------------------------------- -# Configuration options related to the dot tool +# Configuration options related to the dot tool #--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more +# powerful graphs. + CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + HAVE_DOT = YES + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is +# allowed to run in parallel. When set to 0 (the default) doxygen will +# base this on the number of processors available in the system. You can set it +# explicitly to a value larger than 0 to get control over the balance +# between CPU load and processing speed. + +DOT_NUM_THREADS = 0 + +# By default doxygen will write a font called FreeSans.ttf to the output +# directory and reference it in all dot files that doxygen generates. This +# font does not include all possible unicode characters however, so when you need +# these (or just want a differently looking font) you can specify the font name +# using DOT_FONTNAME. You need need to make sure dot is able to find the font, +# which can be done by putting it in a standard location or by setting the +# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory +# containing the font. + +DOT_FONTNAME = FreeSans.ttf + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the output directory to look for the +# FreeSans.ttf font (which doxygen will put there itself). If you specify a +# different font using DOT_FONTNAME you can set the path where dot +# can find it using this tag. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + CALL_GRAPH = YES + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + CALLER_GRAPH = YES + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + DOTFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + DOT_MULTI_TARGETS = YES + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + DOT_CLEANUP = YES -#--------------------------------------------------------------------------- -# Configuration::additions related to the search engine -#--------------------------------------------------------------------------- -SEARCHENGINE = NO diff -Nru libantlr3c-3.2/doxygen/buildrec.dox libantlr3c-3.4+dfsg/doxygen/buildrec.dox --- libantlr3c-3.2/doxygen/buildrec.dox 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/doxygen/buildrec.dox 2011-06-22 22:32:15.000000000 +0000 @@ -85,11 +85,11 @@ /// // it is easy to privide inpput from different sources such as files, or /// // memory strings. /// // -/// // For an ASCII/latin-1 memory string use: -/// // input = antlr3NewAsciiStringInPlaceStream (stringtouse, (ANTLR3_UINT32) length, NULL); +/// // For an 8Bit/latin-1/etc memory string use: +/// // input = antlr3New8BitStringInPlaceStream (stringtouse, (ANTLR3_UINT32) length, NULL); /// // -/// // For a UCS2 (16 bit) memory string use: -/// // input = antlr3NewUCS2StringInPlaceStream (stringtouse, (ANTLR3_UINT32) length, NULL); +/// // For a UTF16 memory string use: +/// // input = antlr3NewUTF16StringInPlaceStream (stringtouse, (ANTLR3_UINT32) length, NULL); /// // /// // For input from a file, see code below /// // @@ -156,9 +156,9 @@ /// } /// /// // Create the input stream using the supplied file name -/// // (Use antlr3AsciiFileStreamNew for UCS2/16bit input). +/// // (Use antlr38BitFileStreamNew for UTF16 input). /// // -/// input = antlr3AsciiFileStreamNew(fName); +/// input = antlr38BitFileStreamNew(fName); /// /// // The input will be created successfully, providing that there is enough /// // memory and the file exists etc diff -Nru libantlr3c-3.2/doxygen/interop.dox libantlr3c-3.4+dfsg/doxygen/interop.dox --- libantlr3c-3.2/doxygen/interop.dox 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/doxygen/interop.dox 2011-06-22 22:32:15.000000000 +0000 @@ -192,7 +192,7 @@ /// // Create a new input stream and take advantage of built in stream stacking /// // in C target runtime. /// // -/// in = antlr3AsciiFileStreamNew(fName->chars); +/// in = antlr38BitFileStreamNew(fName->chars); /// PUSHSTREAM(in); /// /// // Note that the input stream is not closed when it EOFs, I don't bother diff -Nru libantlr3c-3.2/doxygen/mainpage.dox libantlr3c-3.4+dfsg/doxygen/mainpage.dox --- libantlr3c-3.2/doxygen/mainpage.dox 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/doxygen/mainpage.dox 2011-06-22 22:32:15.000000000 +0000 @@ -4,21 +4,21 @@ /// \mainpage ANTLR3 C Runtime API and Usage Guide. /// -/// \section version Version 3.1 +/// \section version Version 3.3.1 /// /// This documentation is specifically for the C rutime version 3.1.x.x, which is /// specifically for use with version 3.1.x.x of the ANTLR recognizer generation /// tool. While some of the documentation may well apply to prior or future versions /// you should consult the manuals for the correct version whenever possible. /// -/// \section chchchchangeesss Changes from 3.0 to 3.1 +/// \section chchchchangeesss Changes from 3.2 to 3.3.1 /// -/// Some changes in 3.1 may require small changes in your invoking programs or +/// Some changes in 3.3.1 may require small changes in your invoking programs or /// in the grammar itself. Please read about them here before emailing the user group, /// where you will be told to come and read about them here, unless they were missed /// from this list. /// -/// - \subpage changes31 Check here for API changes +/// - \subpage changes331 Check here for API changes /// /// \section intro Introduction /// diff -Nru libantlr3c-3.2/doxygen/runtime.dox libantlr3c-3.4+dfsg/doxygen/runtime.dox --- libantlr3c-3.2/doxygen/runtime.dox 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/doxygen/runtime.dox 2011-06-22 22:32:15.000000000 +0000 @@ -11,7 +11,7 @@ /// methods. /// /// The typedefs are the types that you declare in your code and which are returned by the -/// 'constructors' such as antlr3AsciiFileStreamNew(). The underlying structures document +/// 'constructors' such as antlr38BitFileStreamNew(). The underlying structures document /// the data elements of the type and what a function pointer installed in any particular /// slot should do. /// @@ -29,7 +29,7 @@ /// to implement the class methods. /// /// From here, the documentation should be obvious. If it is not, then you could try reading -/// the actual source code, but please don;t email the author directly, but use the ANTLR Interest +/// the actual source code, but please don't email the author directly, use the ANTLR Interest /// email group, which you should probably have signed up for if you have read this far into the /// C runtime documentation. /// \ No newline at end of file diff -Nru libantlr3c-3.2/include/antlr3commontoken.h libantlr3c-3.4+dfsg/include/antlr3commontoken.h --- libantlr3c-3.2/include/antlr3commontoken.h 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/include/antlr3commontoken.h 2011-06-22 22:32:16.000000000 +0000 @@ -322,6 +322,10 @@ */ ANTLR3_INT32 thisPool; + /** Maximum pool count we have available + */ + ANTLR3_INT32 maxPool; + /** The next token to throw out from the pool, will cause a new pool allocation * if this exceeds the available tokenCount */ @@ -341,6 +345,11 @@ */ pANTLR3_COMMON_TOKEN (*newToken) (struct ANTLR3_TOKEN_FACTORY_struct * factory); + /** Pointer to a function that resets the factory so you can reuse the pools it + * has laready allocated + */ + void (*reset) (struct ANTLR3_TOKEN_FACTORY_struct * factory); + /** Pointer to a function that changes teh curent inptu stream so that * new tokens are created with reference to their originating text. */ diff -Nru libantlr3c-3.2/include/antlr3convertutf.h libantlr3c-3.4+dfsg/include/antlr3convertutf.h --- libantlr3c-3.2/include/antlr3convertutf.h 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/include/antlr3convertutf.h 1970-01-01 00:00:00.000000000 +0000 @@ -1,166 +0,0 @@ -/* - * Copyright 2001-2004 Unicode, Inc. - * - * Disclaimer - * - * This source code is provided as is by Unicode, Inc. No claims are - * made as to fitness for any particular purpose. No warranties of any - * kind are expressed or implied. The recipient agrees to determine - * applicability of information provided. If this file has been - * purchased on magnetic or optical media from Unicode, Inc., the - * sole remedy for any claim will be exchange of defective media - * within 90 days of receipt. - * - * Limitations on Rights to Redistribute This Code - * - * Unicode, Inc. hereby grants the right to freely use the information - * supplied in this file in the creation of products supporting the - * Unicode Standard, and to make copies of this file in any form - * for internal or external distribution as long as this notice - * remains attached. - */ - -/* --------------------------------------------------------------------- - - Conversions between UTF32, UTF-16, and UTF-8. Header file. - - Several functions are included here, forming a complete set of - conversions between the three formats. UTF-7 is not included - here, but is handled in a separate source file. - - Each of these routines takes pointers to input buffers and output - buffers. The input buffers are const. - - Each routine converts the text between *sourceStart and sourceEnd, - putting the result into the buffer between *targetStart and - targetEnd. Note: the end pointers are *after* the last item: e.g. - *(sourceEnd - 1) is the last item. - - The return result indicates whether the conversion was successful, - and if not, whether the problem was in the source or target buffers. - (Only the first encountered problem is indicated.) - - After the conversion, *sourceStart and *targetStart are both - updated to point to the end of last text successfully converted in - the respective buffers. - - Input parameters: - sourceStart - pointer to a pointer to the source buffer. - The contents of this are modified on return so that - it points at the next thing to be converted. - targetStart - similarly, pointer to pointer to the target buffer. - sourceEnd, targetEnd - respectively pointers to the ends of the - two buffers, for overflow checking only. - - These conversion functions take a ConversionFlags argument. When this - flag is set to strict, both irregular sequences and isolated surrogates - will cause an error. When the flag is set to lenient, both irregular - sequences and isolated surrogates are converted. - - Whether the flag is strict or lenient, all illegal sequences will cause - an error return. This includes sequences such as: , , - or in UTF-8, and values above 0x10FFFF in UTF-32. Conformant code - must check for illegal sequences. - - When the flag is set to lenient, characters over 0x10FFFF are converted - to the replacement character; otherwise (when the flag is set to strict) - they constitute an error. - - Output parameters: - The value "sourceIllegal" is returned from some routines if the input - sequence is malformed. When "sourceIllegal" is returned, the source - value will point to the illegal value that caused the problem. E.g., - in UTF-8 when a sequence is malformed, it points to the start of the - malformed sequence. - - Author: Mark E. Davis, 1994. - Rev History: Rick McGowan, fixes & updates May 2001. - Fixes & updates, Sept 2001. - ------------------------------------------------------------------------- */ - -/* --------------------------------------------------------------------- - The following 4 definitions are compiler-specific. - The C standard does not guarantee that wchar_t has at least - 16 bits, so wchar_t is no less portable than unsigned short! - All should be unsigned values to avoid sign extension during - bit mask & shift operations. ------------------------------------------------------------------------- */ - - -// Changes for ANTLR3 - Jim Idle, January 2008. -// builtin types defined for Unicode types changed to -// aliases for the types that are system determined by -// ANTLR at compile time. -// -// typedef unsigned long UTF32; /* at least 32 bits */ -// typedef unsigned short UTF16; /* at least 16 bits */ -// typedef unsigned char UTF8; /* typically 8 bits */ -// typedef unsigned char Boolean; /* 0 or 1 */ - -#ifndef _ANTLR3_CONVERTUTF_H -#define _ANTLR3_CONVERTUTF_H - -#include - -typedef ANTLR3_UINT32 UTF32; /* at least 32 bits */ -typedef ANTLR3_UINT16 UTF16; /* at least 16 bits */ -typedef ANTLR3_UINT8 UTF8; /* typically 8 bits */ - -/* Some fundamental constants */ -#define UNI_REPLACEMENT_CHAR (UTF32)0x0000FFFD -#define UNI_MAX_BMP (UTF32)0x0000FFFF -#define UNI_MAX_UTF16 (UTF32)0x0010FFFF -#define UNI_MAX_UTF32 (UTF32)0x7FFFFFFF -#define UNI_MAX_LEGAL_UTF32 (UTF32)0x0010FFFF - -typedef enum { - conversionOK, /* conversion successful */ - sourceExhausted, /* partial character in source, but hit end */ - targetExhausted, /* insuff. room in target for conversion */ - sourceIllegal /* source sequence is illegal/malformed */ -} ConversionResult; - -typedef enum { - strictConversion = 0, - lenientConversion -} ConversionFlags; - -/* This is for C++ and does no harm in C */ -#ifdef __cplusplus -extern "C" { -#endif - -ConversionResult ConvertUTF8toUTF16 ( - const UTF8** sourceStart, const UTF8* sourceEnd, - UTF16** targetStart, UTF16* targetEnd, ConversionFlags flags); - -ConversionResult ConvertUTF16toUTF8 ( - const UTF16** sourceStart, const UTF16* sourceEnd, - UTF8** targetStart, UTF8* targetEnd, ConversionFlags flags); - -ConversionResult ConvertUTF8toUTF32 ( - const UTF8** sourceStart, const UTF8* sourceEnd, - UTF32** targetStart, UTF32* targetEnd, ConversionFlags flags); - -ConversionResult ConvertUTF32toUTF8 ( - const UTF32** sourceStart, const UTF32* sourceEnd, - UTF8** targetStart, UTF8* targetEnd, ConversionFlags flags); - -ConversionResult ConvertUTF16toUTF32 ( - const UTF16** sourceStart, const UTF16* sourceEnd, - UTF32** targetStart, UTF32* targetEnd, ConversionFlags flags); - -ConversionResult ConvertUTF32toUTF16 ( - const UTF32** sourceStart, const UTF32* sourceEnd, - UTF16** targetStart, UTF16* targetEnd, ConversionFlags flags); - -ANTLR3_BOOLEAN isLegalUTF8Sequence(const UTF8 *source, const UTF8 *sourceEnd); - -#ifdef __cplusplus -} -#endif - -#endif - -/* --------------------------------------------------------------------- */ diff -Nru libantlr3c-3.2/include/antlr3defs.h libantlr3c-3.4+dfsg/include/antlr3defs.h --- libantlr3c-3.2/include/antlr3defs.h 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/include/antlr3defs.h 2011-06-22 22:32:16.000000000 +0000 @@ -41,36 +41,65 @@ #ifdef ANTLR3_HUGE #ifndef ANTLR3_SIZE_HINT -#define ANTLR3_SIZE_HINT 2049 +#define ANTLR3_SIZE_HINT 2049 #endif #ifndef ANTLR3_LIST_SIZE_HINT -#define ANTLR3_LIST_SIZE_HINT 127 +#define ANTLR3_LIST_SIZE_HINT 127 #endif #endif #ifdef ANTLR3_AVERAGE #ifndef ANTLR3_SIZE_HINT -#define ANTLR3_SIZE_HINT 1025 -#define ANTLR3_LIST_SIZE_HINT 63 +#define ANTLR3_SIZE_HINT 1025 +#define ANTLR3_LIST_SIZE_HINT 63 #endif #endif #ifdef ANTLR3_SMALL #ifndef ANTLR3_SIZE_HINT -#define ANTLR3_SIZE_HINT 211 -#define ANTLR3_LIST_SIZE_HINT 31 +#define ANTLR3_SIZE_HINT 211 +#define ANTLR3_LIST_SIZE_HINT 31 #endif #endif +// Definitions that indicate the encoding scheme character streams and strings etc +// +/// Indicates Big Endian for encodings where this makes sense +/// +#define ANTLR3_BE 1 + +/// Indicates Little Endian for encoidngs where this makes sense +/// +#define ANTLR3_LE 2 + +/// General latin-1 or other 8 bit encoding scheme such as straight ASCII +/// +#define ANTLR3_ENC_8BIT 4 + +/// UTF-8 encoding scheme +/// +#define ANTLR3_ENC_UTF8 8 + +/// UTF-16 encoding scheme (which also covers UCS2 as that does not have surrogates) +/// +#define ANTLR3_ENC_UTF16 16 +#define ANTLR3_ENC_UTF16BE 16 + ANTLR3_BE +#define ANTLR3_ENC_UTF16LE 16 + ANTLR3_LE + +/// UTF-32 encoding scheme (basically straight 32 bit) +/// +#define ANTLR3_ENC_UTF32 32 +#define ANTLR3_ENC_UTF32BE 32 + ANTLR3_BE +#define ANTLR3_ENC_UTF32LE 32 + ANTLR3_LE + +/// Input is 8 bit EBCDIC (which we convert to 8 bit ASCII on the fly +/// +#define ANTLR3_ENC_EBCDIC 64 + /* Common definitions come first */ #include -#define ANTLR3_ENCODING_LATIN1 0 -#define ANTLR3_ENCODING_UCS2 1 -#define ANTLR3_ENCODING_UTF8 2 -#define ANTLR3_ENCODING_UTF32 3 - /* Work out what operating system/compiler this is. We just do this once * here and use an internal symbol after this. */ @@ -107,15 +136,15 @@ #endif #include -#include -#include +#include +#include #include #include #include #include -#define ANTLR3_API __declspec(dllexport) -#define ANTLR3_CDECL __cdecl +#define ANTLR3_API __declspec(dllexport) +#define ANTLR3_CDECL __cdecl #define ANTLR3_FASTCALL __fastcall #ifdef __cplusplus @@ -144,45 +173,45 @@ // such as UINT16, hence we must use stdint.h for Mingw. // #include -typedef int32_t ANTLR3_CHAR, *pANTLR3_CHAR; -typedef uint32_t ANTLR3_UCHAR, *pANTLR3_UCHAR; +typedef int32_t ANTLR3_CHAR, *pANTLR3_CHAR; +typedef uint32_t ANTLR3_UCHAR, *pANTLR3_UCHAR; -typedef int8_t ANTLR3_INT8, *pANTLR3_INT8; -typedef int16_t ANTLR3_INT16, *pANTLR3_INT16; -typedef int32_t ANTLR3_INT32, *pANTLR3_INT32; -typedef int64_t ANTLR3_INT64, *pANTLR3_INT64; +typedef int8_t ANTLR3_INT8, *pANTLR3_INT8; +typedef int16_t ANTLR3_INT16, *pANTLR3_INT16; +typedef int32_t ANTLR3_INT32, *pANTLR3_INT32; +typedef int64_t ANTLR3_INT64, *pANTLR3_INT64; -typedef uint8_t ANTLR3_UINT8, *pANTLR3_UINT8; -typedef uint16_t ANTLR3_UINT16, *pANTLR3_UINT16; -typedef uint32_t ANTLR3_UINT32, *pANTLR3_UINT32; -typedef uint64_t ANTLR3_UINT64, *pANTLR3_UINT64; -typedef uint64_t ANTLR3_BITWORD, *pANTLR3_BITWORD; +typedef uint8_t ANTLR3_UINT8, *pANTLR3_UINT8; +typedef uint16_t ANTLR3_UINT16, *pANTLR3_UINT16; +typedef uint32_t ANTLR3_UINT32, *pANTLR3_UINT32; +typedef uint64_t ANTLR3_UINT64, *pANTLR3_UINT64; +typedef uint64_t ANTLR3_BITWORD, *pANTLR3_BITWORD; -typedef uint8_t ANTLR3_BOOLEAN, *pANTLR3_BOOLEAN; +typedef uint8_t ANTLR3_BOOLEAN, *pANTLR3_BOOLEAN; #endif -#define ANTLR3_UINT64_LIT(lit) lit##ULL +#define ANTLR3_UINT64_LIT(lit) lit##ULL -#define ANTLR3_INLINE __inline +#define ANTLR3_INLINE __inline typedef FILE * ANTLR3_FDSC; typedef struct stat ANTLR3_FSTAT_STRUCT; #ifdef ANTLR3_USE_64BIT -#define ANTLR3_FUNC_PTR(ptr) (void *)((ANTLR3_UINT64)(ptr)) -#define ANTLR3_UINT64_CAST(ptr) (ANTLR3_UINT64)(ptr)) -#define ANTLR3_UINT32_CAST(ptr) (ANTLR3_UINT32)((ANTLR3_UINT64)(ptr)) -typedef ANTLR3_INT64 ANTLR3_MARKER; -typedef ANTLR3_UINT64 ANTLR3_INTKEY; +#define ANTLR3_FUNC_PTR(ptr) (void *)((ANTLR3_UINT64)(ptr)) +#define ANTLR3_UINT64_CAST(ptr) (ANTLR3_UINT64)(ptr)) +#define ANTLR3_UINT32_CAST(ptr) (ANTLR3_UINT32)((ANTLR3_UINT64)(ptr)) +typedef ANTLR3_INT64 ANTLR3_MARKER; +typedef ANTLR3_UINT64 ANTLR3_INTKEY; #else -#define ANTLR3_FUNC_PTR(ptr) (void *)((ANTLR3_UINT32)(ptr)) -#define ANTLR3_UINT64_CAST(ptr) (ANTLR3_UINT64)((ANTLR3_UINT32)(ptr)) -#define ANTLR3_UINT32_CAST(ptr) (ANTLR3_UINT32)(ptr) -typedef ANTLR3_INT32 ANTLR3_MARKER; -typedef ANTLR3_UINT32 ANTLR3_INTKEY; +#define ANTLR3_FUNC_PTR(ptr) (void *)((ANTLR3_UINT32)(ptr)) +#define ANTLR3_UINT64_CAST(ptr) (ANTLR3_UINT64)((ANTLR3_UINT32)(ptr)) +#define ANTLR3_UINT32_CAST(ptr) (ANTLR3_UINT32)(ptr) +typedef ANTLR3_INT32 ANTLR3_MARKER; +typedef ANTLR3_UINT32 ANTLR3_INTKEY; #endif #ifdef ANTLR3_WIN32 @@ -192,7 +221,7 @@ #endif -typedef int ANTLR3_SALENT; // Type used for size of accept structure +typedef int ANTLR3_SALENT; // Type used for size of accept structure typedef struct sockaddr_in ANTLR3_SOCKADDRT, * pANTLR3_SOCKADDRT; // Type used for socket address declaration typedef struct sockaddr ANTLR3_SOCKADDRC, * pANTLR3_SOCKADDRC; // Type used for cast on accept() @@ -321,7 +350,7 @@ // SOCKET not defined on Unix // -typedef int SOCKET; +typedef int SOCKET; #define ANTLR3_API #define ANTLR3_CDECL @@ -329,32 +358,32 @@ #ifdef __hpux - // HPUX is always different usually for no good reason. Tru64 should have kicked it - // into touch and everyone knows it ;-) - // - typedef struct sockaddr_in ANTLR3_SOCKADDRT, * pANTLR3_SOCKADDRT; // Type used for socket address declaration - typedef void * pANTLR3_SOCKADDRC; // Type used for cast on accept() - typedef int ANTLR3_SALENT; + // HPUX is always different usually for no good reason. Tru64 should have kicked it + // into touch and everyone knows it ;-) + // + typedef struct sockaddr_in ANTLR3_SOCKADDRT, * pANTLR3_SOCKADDRT; // Type used for socket address declaration + typedef void * pANTLR3_SOCKADDRC; // Type used for cast on accept() + typedef int ANTLR3_SALENT; #else # if defined(_AIX) || __GNUC__ > 3 - typedef socklen_t ANTLR3_SALENT; + typedef socklen_t ANTLR3_SALENT; # else - typedef size_t ANTLR3_SALENT; + typedef size_t ANTLR3_SALENT; # endif - typedef struct sockaddr_in ANTLR3_SOCKADDRT, * pANTLR3_SOCKADDRT; // Type used for socket address declaration - typedef struct sockaddr * pANTLR3_SOCKADDRC; // Type used for cast on accept() + typedef struct sockaddr_in ANTLR3_SOCKADDRT, * pANTLR3_SOCKADDRT; // Type used for socket address declaration + typedef struct sockaddr * pANTLR3_SOCKADDRC; // Type used for cast on accept() #endif -#define INVALID_SOCKET ((SOCKET)-1) -#define ANTLR3_CLOSESOCKET close +#define INVALID_SOCKET ((SOCKET)-1) +#define ANTLR3_CLOSESOCKET close #ifdef __cplusplus extern "C" { @@ -362,21 +391,21 @@ /* Inherit type definitions for autoconf */ -typedef int32_t ANTLR3_CHAR, *pANTLR3_CHAR; -typedef uint32_t ANTLR3_UCHAR, *pANTLR3_UCHAR; +typedef int32_t ANTLR3_CHAR, *pANTLR3_CHAR; +typedef uint32_t ANTLR3_UCHAR, *pANTLR3_UCHAR; -typedef int8_t ANTLR3_INT8, *pANTLR3_INT8; -typedef int16_t ANTLR3_INT16, *pANTLR3_INT16; -typedef int32_t ANTLR3_INT32, *pANTLR3_INT32; -typedef int64_t ANTLR3_INT64, *pANTLR3_INT64; - -typedef uint8_t ANTLR3_UINT8, *pANTLR3_UINT8; -typedef uint16_t ANTLR3_UINT16, *pANTLR3_UINT16; -typedef uint32_t ANTLR3_UINT32, *pANTLR3_UINT32; -typedef uint64_t ANTLR3_UINT64, *pANTLR3_UINT64; -typedef uint64_t ANTLR3_BITWORD, *pANTLR3_BITWORD; +typedef int8_t ANTLR3_INT8, *pANTLR3_INT8; +typedef int16_t ANTLR3_INT16, *pANTLR3_INT16; +typedef int32_t ANTLR3_INT32, *pANTLR3_INT32; +typedef int64_t ANTLR3_INT64, *pANTLR3_INT64; + +typedef uint8_t ANTLR3_UINT8, *pANTLR3_UINT8; +typedef uint16_t ANTLR3_UINT16, *pANTLR3_UINT16; +typedef uint32_t ANTLR3_UINT32, *pANTLR3_UINT32; +typedef uint64_t ANTLR3_UINT64, *pANTLR3_UINT64; +typedef uint64_t ANTLR3_BITWORD, *pANTLR3_BITWORD; -typedef uint32_t ANTLR3_BOOLEAN, *pANTLR3_BOOLEAN; +typedef uint32_t ANTLR3_BOOLEAN, *pANTLR3_BOOLEAN; #define ANTLR3_INLINE inline #define ANTLR3_API @@ -385,19 +414,19 @@ typedef struct stat ANTLR3_FSTAT_STRUCT; #ifdef ANTLR3_USE_64BIT -#define ANTLR3_FUNC_PTR(ptr) (void *)((ANTLR3_UINT64)(ptr)) -#define ANTLR3_UINT64_CAST(ptr) (ANTLR3_UINT64)(ptr)) -#define ANTLR3_UINT32_CAST(ptr) (ANTLR3_UINT32)((ANTLR3_UINT64)(ptr)) -typedef ANTLR3_INT64 ANTLR3_MARKER; -typedef ANTLR3_UINT64 ANTLR3_INTKEY; +#define ANTLR3_FUNC_PTR(ptr) (void *)((ANTLR3_UINT64)(ptr)) +#define ANTLR3_UINT64_CAST(ptr) (ANTLR3_UINT64)(ptr)) +#define ANTLR3_UINT32_CAST(ptr) (ANTLR3_UINT32)((ANTLR3_UINT64)(ptr)) +typedef ANTLR3_INT64 ANTLR3_MARKER; +typedef ANTLR3_UINT64 ANTLR3_INTKEY; #else -#define ANTLR3_FUNC_PTR(ptr) (void *)((ANTLR3_UINT32)(ptr)) -#define ANTLR3_UINT64_CAST(ptr) (ANTLR3_UINT64)((ANTLR3_UINT32)(ptr)) -#define ANTLR3_UINT32_CAST(ptr) (ANTLR3_UINT32)(ptr) -typedef ANTLR3_INT32 ANTLR3_MARKER; -typedef ANTLR3_UINT32 ANTLR3_INTKEY; +#define ANTLR3_FUNC_PTR(ptr) (void *)((ANTLR3_UINT32)(ptr)) +#define ANTLR3_UINT64_CAST(ptr) (ANTLR3_UINT64)((ANTLR3_UINT32)(ptr)) +#define ANTLR3_UINT32_CAST(ptr) (ANTLR3_UINT32)(ptr) +typedef ANTLR3_INT32 ANTLR3_MARKER; +typedef ANTLR3_UINT32 ANTLR3_INTKEY; #endif -#define ANTLR3_UINT64_LIT(lit) lit##ULL +#define ANTLR3_UINT64_LIT(lit) lit##ULL #ifdef __cplusplus } @@ -418,7 +447,7 @@ // Include the unicode.org conversion library header. // -#include +#include /* Prototypes */ @@ -426,57 +455,57 @@ /// Default definition of ANTLR3_MALLOC. You can override this before including /// antlr3.h if you wish to use your own implementation. /// -#define ANTLR3_MALLOC(request) malloc ((size_t)(request)) +#define ANTLR3_MALLOC(request) malloc ((size_t)(request)) #endif #ifndef ANTLR3_CALLOC /// Default definition of ANTLR3_CALLOC. You can override this before including /// antlr3.h if you wish to use your own implementation. /// -#define ANTLR3_CALLOC(numEl, elSize) calloc (numEl, (size_t)(elSize)) +#define ANTLR3_CALLOC(numEl, elSize) calloc (numEl, (size_t)(elSize)) #endif #ifndef ANTLR3_REALLOC /// Default definition of ANTLR3_REALLOC. You can override this before including /// antlr3.h if you wish to use your own implementation. /// -#define ANTLR3_REALLOC(current, request) realloc ((void *)(current), (size_t)(request)) +#define ANTLR3_REALLOC(current, request) realloc ((void *)(current), (size_t)(request)) #endif #ifndef ANTLR3_FREE /// Default definition of ANTLR3_FREE. You can override this before including /// antlr3.h if you wish to use your own implementation. /// -#define ANTLR3_FREE(ptr) free ((void *)(ptr)) +#define ANTLR3_FREE(ptr) free ((void *)(ptr)) #endif #ifndef ANTLR3_FREE_FUNC -/// Default definition of ANTLR3_FREE_FUNC . You can override this before including +/// Default definition of ANTLR3_FREE_FUNC. You can override this before including /// antlr3.h if you wish to use your own implementation. /// -#define ANTLR3_FREE_FUNC free +#define ANTLR3_FREE_FUNC free #endif #ifndef ANTLR3_STRDUP /// Default definition of ANTLR3_STRDUP. You can override this before including /// antlr3.h if you wish to use your own implementation. /// -#define ANTLR3_STRDUP(instr) (pANTLR3_UINT8)(strdup ((const char *)(instr))) +#define ANTLR3_STRDUP(instr) (pANTLR3_UINT8)(strdup ((const char *)(instr))) #endif #ifndef ANTLR3_MEMCPY /// Default definition of ANTLR3_MEMCPY. You can override this before including /// antlr3.h if you wish to use your own implementation. /// -#define ANTLR3_MEMCPY(target, source, size) memcpy((void *)(target), (const void *)(source), (size_t)(size)) +#define ANTLR3_MEMCPY(target, source, size) memcpy((void *)(target), (const void *)(source), (size_t)(size)) #endif #ifndef ANTLR3_MEMMOVE /// Default definition of ANTLR3_MEMMOVE. You can override this before including /// antlr3.h if you wish to use your own implementation. /// -#define ANTLR3_MEMMOVE(target, source, size) memmove((void *)(target), (const void *)(source), (size_t)(size)) +#define ANTLR3_MEMMOVE(target, source, size) memmove((void *)(target), (const void *)(source), (size_t)(size)) #endif #ifndef ANTLR3_MEMSET /// Default definition of ANTLR3_MEMSET. You can override this before including /// antlr3.h if you wish to use your own implementation. /// -#define ANTLR3_MEMSET(target, byte, size) memset((void *)(target), (int)(byte), (size_t)(size)) +#define ANTLR3_MEMSET(target, byte, size) memset((void *)(target), (int)(byte), (size_t)(size)) #endif #ifndef ANTLR3_PRINTF @@ -484,7 +513,7 @@ /// if your system does not have a printf. Note that you can define this to be // /// without harming the runtime. /// -#define ANTLR3_PRINTF printf +#define ANTLR3_PRINTF printf #endif #ifndef ANTLR3_FPRINTF @@ -492,113 +521,109 @@ /// if your system does not have a fprintf. Note that you can define this to be // /// without harming the runtime. /// -#define ANTLR3_FPRINTF fprintf +#define ANTLR3_FPRINTF fprintf #endif #ifdef __cplusplus extern "C" { #endif -ANTLR3_API pANTLR3_INT_TRIE antlr3IntTrieNew (ANTLR3_UINT32 depth); +ANTLR3_API pANTLR3_INT_TRIE antlr3IntTrieNew (ANTLR3_UINT32 depth); -ANTLR3_API pANTLR3_BITSET antlr3BitsetNew (ANTLR3_UINT32 numBits); -ANTLR3_API pANTLR3_BITSET antlr3BitsetOf (ANTLR3_INT32 bit, ...); -ANTLR3_API pANTLR3_BITSET antlr3BitsetList (pANTLR3_HASH_TABLE list); -ANTLR3_API pANTLR3_BITSET antlr3BitsetCopy (pANTLR3_BITSET_LIST blist); -ANTLR3_API pANTLR3_BITSET antlr3BitsetLoad (pANTLR3_BITSET_LIST blist); -ANTLR3_API void antlr3BitsetSetAPI (pANTLR3_BITSET bitset); - - -ANTLR3_API pANTLR3_BASE_RECOGNIZER antlr3BaseRecognizerNew (ANTLR3_UINT32 type, ANTLR3_UINT32 sizeHint, pANTLR3_RECOGNIZER_SHARED_STATE state); -ANTLR3_API void antlr3RecognitionExceptionNew (pANTLR3_BASE_RECOGNIZER recognizer); -ANTLR3_API void antlr3MTExceptionNew (pANTLR3_BASE_RECOGNIZER recognizer); -ANTLR3_API void antlr3MTNExceptionNew (pANTLR3_BASE_RECOGNIZER recognizer); -ANTLR3_API pANTLR3_HASH_TABLE antlr3HashTableNew (ANTLR3_UINT32 sizeHint); -ANTLR3_API ANTLR3_UINT32 antlr3Hash (void * key, ANTLR3_UINT32 keylen); -ANTLR3_API pANTLR3_HASH_ENUM antlr3EnumNew (pANTLR3_HASH_TABLE table); -ANTLR3_API pANTLR3_LIST antlr3ListNew (ANTLR3_UINT32 sizeHint); -ANTLR3_API pANTLR3_VECTOR_FACTORY antlr3VectorFactoryNew (ANTLR3_UINT32 sizeHint); -ANTLR3_API pANTLR3_VECTOR antlr3VectorNew (ANTLR3_UINT32 sizeHint); -ANTLR3_API pANTLR3_STACK antlr3StackNew (ANTLR3_UINT32 sizeHint); -ANTLR3_API void antlr3SetVectorApi (pANTLR3_VECTOR vector, ANTLR3_UINT32 sizeHint); -ANTLR3_API ANTLR3_UCHAR antlr3c8toAntlrc (ANTLR3_INT8 inc); -ANTLR3_API pANTLR3_TOPO antlr3TopoNew(); - -ANTLR3_API pANTLR3_EXCEPTION antlr3ExceptionNew (ANTLR3_UINT32 exception, void * name, void * message, ANTLR3_BOOLEAN freeMessage); - -ANTLR3_API pANTLR3_INPUT_STREAM antlr3AsciiFileStreamNew (pANTLR3_UINT8 fileName); - -ANTLR3_API pANTLR3_INPUT_STREAM antlr3NewAsciiStringInPlaceStream (pANTLR3_UINT8 inString, ANTLR3_UINT32 size, pANTLR3_UINT8 name); -ANTLR3_API pANTLR3_INPUT_STREAM antlr3NewUCS2StringInPlaceStream (pANTLR3_UINT16 inString, ANTLR3_UINT32 size, pANTLR3_UINT16 name); -ANTLR3_API pANTLR3_INPUT_STREAM antlr3NewAsciiStringCopyStream (pANTLR3_UINT8 inString, ANTLR3_UINT32 size, pANTLR3_UINT8 name); - -ANTLR3_API pANTLR3_INT_STREAM antlr3IntStreamNew (void); - -ANTLR3_API pANTLR3_STRING_FACTORY antlr3StringFactoryNew (void); -ANTLR3_API pANTLR3_STRING_FACTORY antlr3UCS2StringFactoryNew (void); - -ANTLR3_API pANTLR3_COMMON_TOKEN antlr3CommonTokenNew (ANTLR3_UINT32 ttype); -ANTLR3_API pANTLR3_TOKEN_FACTORY antlr3TokenFactoryNew (pANTLR3_INPUT_STREAM input); -ANTLR3_API void antlr3SetTokenAPI (pANTLR3_COMMON_TOKEN token); - -ANTLR3_API pANTLR3_LEXER antlr3LexerNewStream (ANTLR3_UINT32 sizeHint, pANTLR3_INPUT_STREAM input, pANTLR3_RECOGNIZER_SHARED_STATE state); -ANTLR3_API pANTLR3_LEXER antlr3LexerNew (ANTLR3_UINT32 sizeHint, pANTLR3_RECOGNIZER_SHARED_STATE state); -ANTLR3_API pANTLR3_PARSER antlr3ParserNewStreamDbg (ANTLR3_UINT32 sizeHint, pANTLR3_TOKEN_STREAM tstream, pANTLR3_DEBUG_EVENT_LISTENER dbg, pANTLR3_RECOGNIZER_SHARED_STATE state); -ANTLR3_API pANTLR3_PARSER antlr3ParserNewStream (ANTLR3_UINT32 sizeHint, pANTLR3_TOKEN_STREAM tstream, pANTLR3_RECOGNIZER_SHARED_STATE state); -ANTLR3_API pANTLR3_PARSER antlr3ParserNew (ANTLR3_UINT32 sizeHint, pANTLR3_RECOGNIZER_SHARED_STATE state); - -ANTLR3_API pANTLR3_COMMON_TOKEN_STREAM antlr3CommonTokenStreamSourceNew (ANTLR3_UINT32 hint, pANTLR3_TOKEN_SOURCE source); -ANTLR3_API pANTLR3_COMMON_TOKEN_STREAM antlr3CommonTokenStreamNew (ANTLR3_UINT32 hint); -ANTLR3_API pANTLR3_COMMON_TOKEN_STREAM antlr3CommonTokenDebugStreamSourceNew - (ANTLR3_UINT32 hint, pANTLR3_TOKEN_SOURCE source, pANTLR3_DEBUG_EVENT_LISTENER debugger); - -ANTLR3_API pANTLR3_BASE_TREE_ADAPTOR ANTLR3_TREE_ADAPTORNew (pANTLR3_STRING_FACTORY strFactory); -ANTLR3_API pANTLR3_BASE_TREE_ADAPTOR ANTLR3_TREE_ADAPTORDebugNew (pANTLR3_STRING_FACTORY strFactory, pANTLR3_DEBUG_EVENT_LISTENER debugger); -ANTLR3_API pANTLR3_COMMON_TREE antlr3CommonTreeNew (void); -ANTLR3_API pANTLR3_COMMON_TREE antlr3CommonTreeNewFromTree (pANTLR3_COMMON_TREE tree); -ANTLR3_API pANTLR3_COMMON_TREE antlr3CommonTreeNewFromToken (pANTLR3_COMMON_TOKEN tree); -ANTLR3_API pANTLR3_ARBORETUM antlr3ArboretumNew (pANTLR3_STRING_FACTORY factory); -ANTLR3_API void antlr3SetCTAPI (pANTLR3_COMMON_TREE tree); -ANTLR3_API pANTLR3_BASE_TREE antlr3BaseTreeNew (pANTLR3_BASE_TREE tree); - -ANTLR3_API void antlr3BaseTreeAdaptorInit (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_DEBUG_EVENT_LISTENER debugger); - -ANTLR3_API pANTLR3_TREE_PARSER antlr3TreeParserNewStream (ANTLR3_UINT32 sizeHint, pANTLR3_COMMON_TREE_NODE_STREAM ctnstream, pANTLR3_RECOGNIZER_SHARED_STATE state); - -ANTLR3_API ANTLR3_INT32 antlr3dfaspecialTransition (void * ctx, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_INT_STREAM is, pANTLR3_CYCLIC_DFA dfa, ANTLR3_INT32 s); -ANTLR3_API ANTLR3_INT32 antlr3dfaspecialStateTransition (void * ctx, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_INT_STREAM is, pANTLR3_CYCLIC_DFA dfa, ANTLR3_INT32 s); -ANTLR3_API ANTLR3_INT32 antlr3dfapredict (void * ctx, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_INT_STREAM is, pANTLR3_CYCLIC_DFA cdfa); - -ANTLR3_API pANTLR3_COMMON_TREE_NODE_STREAM antlr3CommonTreeNodeStreamNewTree (pANTLR3_BASE_TREE tree, ANTLR3_UINT32 hint); -ANTLR3_API pANTLR3_COMMON_TREE_NODE_STREAM antlr3CommonTreeNodeStreamNew (pANTLR3_STRING_FACTORY strFactory, ANTLR3_UINT32 hint); -ANTLR3_API pANTLR3_COMMON_TREE_NODE_STREAM antlr3UnbufTreeNodeStreamNewTree (pANTLR3_BASE_TREE tree, ANTLR3_UINT32 hint); -ANTLR3_API pANTLR3_COMMON_TREE_NODE_STREAM antlr3UnbufTreeNodeStreamNew (pANTLR3_STRING_FACTORY strFactory, ANTLR3_UINT32 hint); -ANTLR3_API pANTLR3_COMMON_TREE_NODE_STREAM antlr3CommonTreeNodeStreamNewStream (pANTLR3_COMMON_TREE_NODE_STREAM inStream); -ANTLR3_API pANTLR3_TREE_NODE_STREAM antlr3TreeNodeStreamNew (); -ANTLR3_API void fillBufferExt (pANTLR3_COMMON_TOKEN_STREAM tokenStream); +ANTLR3_API pANTLR3_BITSET antlr3BitsetNew (ANTLR3_UINT32 numBits); +ANTLR3_API pANTLR3_BITSET antlr3BitsetOf (ANTLR3_INT32 bit, ...); +ANTLR3_API pANTLR3_BITSET antlr3BitsetList (pANTLR3_HASH_TABLE list); +ANTLR3_API pANTLR3_BITSET antlr3BitsetCopy (pANTLR3_BITSET_LIST blist); +ANTLR3_API pANTLR3_BITSET antlr3BitsetLoad (pANTLR3_BITSET_LIST blist); +ANTLR3_API void antlr3BitsetSetAPI (pANTLR3_BITSET bitset); + + +ANTLR3_API pANTLR3_BASE_RECOGNIZER antlr3BaseRecognizerNew (ANTLR3_UINT32 type, ANTLR3_UINT32 sizeHint, pANTLR3_RECOGNIZER_SHARED_STATE state); +ANTLR3_API void antlr3RecognitionExceptionNew (pANTLR3_BASE_RECOGNIZER recognizer); +ANTLR3_API void antlr3MTExceptionNew (pANTLR3_BASE_RECOGNIZER recognizer); +ANTLR3_API void antlr3MTNExceptionNew (pANTLR3_BASE_RECOGNIZER recognizer); +ANTLR3_API pANTLR3_HASH_TABLE antlr3HashTableNew (ANTLR3_UINT32 sizeHint); +ANTLR3_API ANTLR3_UINT32 antlr3Hash (void * key, ANTLR3_UINT32 keylen); +ANTLR3_API pANTLR3_HASH_ENUM antlr3EnumNew (pANTLR3_HASH_TABLE table); +ANTLR3_API pANTLR3_LIST antlr3ListNew (ANTLR3_UINT32 sizeHint); +ANTLR3_API pANTLR3_VECTOR_FACTORY antlr3VectorFactoryNew (ANTLR3_UINT32 sizeHint); +ANTLR3_API pANTLR3_VECTOR antlr3VectorNew (ANTLR3_UINT32 sizeHint); +ANTLR3_API pANTLR3_STACK antlr3StackNew (ANTLR3_UINT32 sizeHint); +ANTLR3_API void antlr3SetVectorApi (pANTLR3_VECTOR vector, ANTLR3_UINT32 sizeHint); +ANTLR3_API ANTLR3_UCHAR antlr3c8toAntlrc (ANTLR3_INT8 inc); +ANTLR3_API pANTLR3_TOPO antlr3TopoNew(); + +ANTLR3_API pANTLR3_EXCEPTION antlr3ExceptionNew (ANTLR3_UINT32 exception, void * name, void * message, ANTLR3_BOOLEAN freeMessage); + + +ANTLR3_API pANTLR3_INPUT_STREAM antlr3FileStreamNew (pANTLR3_UINT8 fileName, ANTLR3_UINT32 encoding); +ANTLR3_API pANTLR3_INPUT_STREAM antlr3StringStreamNew (pANTLR3_UINT8 data, ANTLR3_UINT32 encoding, ANTLR3_UINT32 size, pANTLR3_UINT8 name); + +ANTLR3_API pANTLR3_INT_STREAM antlr3IntStreamNew (void); + +ANTLR3_API pANTLR3_STRING_FACTORY antlr3StringFactoryNew (ANTLR3_UINT32 encoding); + +ANTLR3_API pANTLR3_COMMON_TOKEN antlr3CommonTokenNew (ANTLR3_UINT32 ttype); +ANTLR3_API pANTLR3_TOKEN_FACTORY antlr3TokenFactoryNew (pANTLR3_INPUT_STREAM input); +ANTLR3_API void antlr3SetTokenAPI (pANTLR3_COMMON_TOKEN token); + +ANTLR3_API pANTLR3_LEXER antlr3LexerNewStream (ANTLR3_UINT32 sizeHint, pANTLR3_INPUT_STREAM input, pANTLR3_RECOGNIZER_SHARED_STATE state); +ANTLR3_API pANTLR3_LEXER antlr3LexerNew (ANTLR3_UINT32 sizeHint, pANTLR3_RECOGNIZER_SHARED_STATE state); +ANTLR3_API pANTLR3_PARSER antlr3ParserNewStreamDbg (ANTLR3_UINT32 sizeHint, pANTLR3_TOKEN_STREAM tstream, pANTLR3_DEBUG_EVENT_LISTENER dbg, pANTLR3_RECOGNIZER_SHARED_STATE state); +ANTLR3_API pANTLR3_PARSER antlr3ParserNewStream (ANTLR3_UINT32 sizeHint, pANTLR3_TOKEN_STREAM tstream, pANTLR3_RECOGNIZER_SHARED_STATE state); +ANTLR3_API pANTLR3_PARSER antlr3ParserNew (ANTLR3_UINT32 sizeHint, pANTLR3_RECOGNIZER_SHARED_STATE state); + +ANTLR3_API pANTLR3_COMMON_TOKEN_STREAM antlr3CommonTokenStreamSourceNew (ANTLR3_UINT32 hint, pANTLR3_TOKEN_SOURCE source); +ANTLR3_API pANTLR3_COMMON_TOKEN_STREAM antlr3CommonTokenStreamNew (ANTLR3_UINT32 hint); +ANTLR3_API pANTLR3_COMMON_TOKEN_STREAM antlr3CommonTokenDebugStreamSourceNew (ANTLR3_UINT32 hint, pANTLR3_TOKEN_SOURCE source, pANTLR3_DEBUG_EVENT_LISTENER debugger); + +ANTLR3_API pANTLR3_BASE_TREE_ADAPTOR ANTLR3_TREE_ADAPTORNew (pANTLR3_STRING_FACTORY strFactory); +ANTLR3_API pANTLR3_BASE_TREE_ADAPTOR ANTLR3_TREE_ADAPTORDebugNew (pANTLR3_STRING_FACTORY strFactory, pANTLR3_DEBUG_EVENT_LISTENER debugger); +ANTLR3_API pANTLR3_COMMON_TREE antlr3CommonTreeNew (void); +ANTLR3_API pANTLR3_COMMON_TREE antlr3CommonTreeNewFromTree (pANTLR3_COMMON_TREE tree); +ANTLR3_API pANTLR3_COMMON_TREE antlr3CommonTreeNewFromToken (pANTLR3_COMMON_TOKEN tree); +ANTLR3_API pANTLR3_ARBORETUM antlr3ArboretumNew (pANTLR3_STRING_FACTORY factory); +ANTLR3_API void antlr3SetCTAPI (pANTLR3_COMMON_TREE tree); +ANTLR3_API pANTLR3_BASE_TREE antlr3BaseTreeNew (pANTLR3_BASE_TREE tree); + +ANTLR3_API void antlr3BaseTreeAdaptorInit (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_DEBUG_EVENT_LISTENER debugger); + +ANTLR3_API pANTLR3_TREE_PARSER antlr3TreeParserNewStream (ANTLR3_UINT32 sizeHint, pANTLR3_COMMON_TREE_NODE_STREAM ctnstream, pANTLR3_RECOGNIZER_SHARED_STATE state); + +ANTLR3_API ANTLR3_INT32 antlr3dfaspecialTransition (void * ctx, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_INT_STREAM is, pANTLR3_CYCLIC_DFA dfa, ANTLR3_INT32 s); +ANTLR3_API ANTLR3_INT32 antlr3dfaspecialStateTransition (void * ctx, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_INT_STREAM is, pANTLR3_CYCLIC_DFA dfa, ANTLR3_INT32 s); +ANTLR3_API ANTLR3_INT32 antlr3dfapredict (void * ctx, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_INT_STREAM is, pANTLR3_CYCLIC_DFA cdfa); + +ANTLR3_API pANTLR3_COMMON_TREE_NODE_STREAM antlr3CommonTreeNodeStreamNewTree (pANTLR3_BASE_TREE tree, ANTLR3_UINT32 hint); +ANTLR3_API pANTLR3_COMMON_TREE_NODE_STREAM antlr3CommonTreeNodeStreamNew (pANTLR3_STRING_FACTORY strFactory, ANTLR3_UINT32 hint); +ANTLR3_API pANTLR3_COMMON_TREE_NODE_STREAM antlr3UnbufTreeNodeStreamNewTree (pANTLR3_BASE_TREE tree, ANTLR3_UINT32 hint); +ANTLR3_API pANTLR3_COMMON_TREE_NODE_STREAM antlr3UnbufTreeNodeStreamNew (pANTLR3_STRING_FACTORY strFactory, ANTLR3_UINT32 hint); +ANTLR3_API pANTLR3_COMMON_TREE_NODE_STREAM antlr3CommonTreeNodeStreamNewStream (pANTLR3_COMMON_TREE_NODE_STREAM inStream); +ANTLR3_API pANTLR3_TREE_NODE_STREAM antlr3TreeNodeStreamNew (); +ANTLR3_API void fillBufferExt (pANTLR3_COMMON_TOKEN_STREAM tokenStream); ANTLR3_API pANTLR3_REWRITE_RULE_TOKEN_STREAM - antlr3RewriteRuleTOKENStreamNewAE (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description); + antlr3RewriteRuleTOKENStreamNewAE (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description); ANTLR3_API pANTLR3_REWRITE_RULE_TOKEN_STREAM - antlr3RewriteRuleTOKENStreamNewAEE (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description, void * oneElement); + antlr3RewriteRuleTOKENStreamNewAEE (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description, void * oneElement); ANTLR3_API pANTLR3_REWRITE_RULE_TOKEN_STREAM - antlr3RewriteRuleTOKENStreamNewAEV (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description, pANTLR3_VECTOR vector); + antlr3RewriteRuleTOKENStreamNewAEV (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description, pANTLR3_VECTOR vector); ANTLR3_API pANTLR3_REWRITE_RULE_NODE_STREAM - antlr3RewriteRuleNODEStreamNewAE (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description); + antlr3RewriteRuleNODEStreamNewAE (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description); ANTLR3_API pANTLR3_REWRITE_RULE_NODE_STREAM - antlr3RewriteRuleNODEStreamNewAEE (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description, void * oneElement); + antlr3RewriteRuleNODEStreamNewAEE (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description, void * oneElement); ANTLR3_API pANTLR3_REWRITE_RULE_NODE_STREAM - antlr3RewriteRuleNODEStreamNewAEV (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description, pANTLR3_VECTOR vector); + antlr3RewriteRuleNODEStreamNewAEV (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description, pANTLR3_VECTOR vector); ANTLR3_API pANTLR3_REWRITE_RULE_SUBTREE_STREAM - antlr3RewriteRuleSubtreeStreamNewAE (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description); + antlr3RewriteRuleSubtreeStreamNewAE (pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description); ANTLR3_API pANTLR3_REWRITE_RULE_SUBTREE_STREAM - antlr3RewriteRuleSubtreeStreamNewAEE(pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description, void * oneElement); + antlr3RewriteRuleSubtreeStreamNewAEE(pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description, void * oneElement); ANTLR3_API pANTLR3_REWRITE_RULE_SUBTREE_STREAM - antlr3RewriteRuleSubtreeStreamNewAEV(pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description, pANTLR3_VECTOR vector); + antlr3RewriteRuleSubtreeStreamNewAEV(pANTLR3_BASE_TREE_ADAPTOR adaptor, pANTLR3_BASE_RECOGNIZER rec, pANTLR3_UINT8 description, pANTLR3_VECTOR vector); -ANTLR3_API pANTLR3_DEBUG_EVENT_LISTENER antlr3DebugListenerNew (); +ANTLR3_API pANTLR3_DEBUG_EVENT_LISTENER antlr3DebugListenerNew(); #ifdef __cplusplus } diff -Nru libantlr3c-3.2/include/antlr3exception.h libantlr3c-3.4+dfsg/include/antlr3exception.h --- libantlr3c-3.2/include/antlr3exception.h 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/include/antlr3exception.h 2011-06-22 22:32:16.000000000 +0000 @@ -43,7 +43,7 @@ /** Name of exception #ANTLR3_RECOGNITION_EXCEPTION */ -#define ANTLR3_RECOGNITION_EX_NAME "Recognition Exception" +#define ANTLR3_RECOGNITION_EX_NAME "org.antlr.runtime.RecognitionException" /** Indicates that the recognizer was expecting one token and found a * a different one. @@ -52,7 +52,7 @@ /** Name of #ANTLR3_MISMATCHED_TOKEN_EXCEPTION */ -#define ANTLR3_MISMATCHED_EX_NAME "Mismatched Token Exception" +#define ANTLR3_MISMATCHED_EX_NAME "org.antlr.runtime.MismatchedTokenException" /** Recognizer could not find a valid alternative from the input */ @@ -60,7 +60,7 @@ /** Name of #ANTLR3_NO_VIABLE_ALT_EXCEPTION */ -#define ANTLR3_NO_VIABLE_ALT_NAME "No Viable Alt" +#define ANTLR3_NO_VIABLE_ALT_NAME "org.antlr.runtime.NoViableAltException" /* Character in a set was not found */ @@ -68,7 +68,7 @@ /* Name of #ANTLR3_MISMATCHED_SET_EXCEPTION */ -#define ANTLR3_MISMATCHED_SET_NAME "Mismatched set" +#define ANTLR3_MISMATCHED_SET_NAME "org.antlr.runtime.MismatchedSetException" /* A rule predicting at least n elements found less than that, * such as: WS: " "+; @@ -77,22 +77,22 @@ /* Name of #ANTLR3_EARLY_EXIT_EXCEPTION */ -#define ANTLR3_EARLY_EXIT_NAME "Early exit" +#define ANTLR3_EARLY_EXIT_NAME "org.antlr.runtime.EarlyExitException" #define ANTLR3_FAILED_PREDICATE_EXCEPTION 6 -#define ANTLR3_FAILED_PREDICATE_NAME "Predicate failed!" +#define ANTLR3_FAILED_PREDICATE_NAME "org.antlr.runtime.FailedPredicateException" #define ANTLR3_MISMATCHED_TREE_NODE_EXCEPTION 7 -#define ANTLR3_MISMATCHED_TREE_NODE_NAME "Mismatched tree node!" +#define ANTLR3_MISMATCHED_TREE_NODE_NAME "org.antlr.runtime.MismatchedTreeNodeException" #define ANTLR3_REWRITE_EARLY_EXCEPTION 8 -#define ANTLR3_REWRITE_EARLY_EXCEPTION_NAME "Mismatched tree node!" +#define ANTLR3_REWRITE_EARLY_EXCEPTION_NAME "org.antlr.runtime.tree.RewriteEarlyExitException" #define ANTLR3_UNWANTED_TOKEN_EXCEPTION 9 -#define ANTLR3_UNWANTED_TOKEN_EXCEPTION_NAME "Extraneous token" +#define ANTLR3_UNWANTED_TOKEN_EXCEPTION_NAME "org.antlr.runtime.UnwantedTokenException" #define ANTLR3_MISSING_TOKEN_EXCEPTION 10 -#define ANTLR3_MISSING_TOKEN_EXCEPTION_NAME "Missing token" +#define ANTLR3_MISSING_TOKEN_EXCEPTION_NAME "org.antlr.runtime.MissingTokenException" #ifdef __cplusplus extern "C" { diff -Nru libantlr3c-3.2/include/antlr3filestream.h libantlr3c-3.4+dfsg/include/antlr3filestream.h --- libantlr3c-3.2/include/antlr3filestream.h 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/include/antlr3filestream.h 2011-06-22 22:32:16.000000000 +0000 @@ -40,7 +40,7 @@ ANTLR3_API void antlr3Fclose (ANTLR3_FDSC fd); ANTLR3_API ANTLR3_UINT32 antlr3Fsize (pANTLR3_UINT8 filename); -ANTLR3_API ANTLR3_UINT32 antlr3readAscii (pANTLR3_INPUT_STREAM input, pANTLR3_UINT8 fileName); +ANTLR3_API ANTLR3_UINT32 antlr3read8Bit (pANTLR3_INPUT_STREAM input, pANTLR3_UINT8 fileName); ANTLR3_API ANTLR3_UINT32 antlr3Fread (ANTLR3_FDSC fdsc, ANTLR3_UINT32 count, void * data); #ifdef __cplusplus diff -Nru libantlr3c-3.2/include/antlr3input.h libantlr3c-3.4+dfsg/include/antlr3input.h --- libantlr3c-3.2/include/antlr3input.h 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/include/antlr3input.h 2011-06-22 22:32:16.000000000 +0000 @@ -1,9 +1,8 @@ /** \file * Defines the basic structures used to manipulate character - * streams from any input source. The first implementation of - * this stream was ASCII 8 bit, but any character size and encoding - * can in theory be used, so long as they can return a 32 bit Integer - * representation of their characters amd efficiently mark and revert + * streams from any input source. Any character size and encoding + * can in theory be used, so long as a set of functinos is provided that + * can return a 32 bit Integer representation of their characters amd efficiently mark and revert * to specific offsets into their input streams. */ #ifndef _ANTLR3_INPUT_H @@ -42,11 +41,14 @@ #include #include #include +#include #ifdef __cplusplus extern "C" { #endif + + /// Master context structure for an ANTLR3 C runtime based input stream. /// \ingroup apistructures /// @@ -64,15 +66,6 @@ */ void * super; - /// Indicates the size, in 8 bit units, of a single character. Note that - /// the C runtime does not deal with surrogates and UTF8 directly as this would be - /// slow and complicated. Variable character width inputs are expected to be converted - /// into fixed width formats, so that would be a UTF32 format for anything that cannot - /// work with a UCS2 encoding, such as UTF-8. Generally you are best - /// working internally with 32 bit characters. - /// - ANTLR3_UINT8 charByteSize; - /** Pointer the start of the input string, characters may be * taken as offsets from here and in original input format encoding. */ @@ -129,14 +122,9 @@ */ pANTLR3_STRING fileName; - /** File number, needs to be set manually to some file index of your devising. - */ - ANTLR3_UINT32 fileNo; - - /** Character that automatically causes an internal line count - * increment. + /** File number, needs to be set manually to some file index of your devising. */ - ANTLR3_UCHAR newlineChar; + ANTLR3_UINT32 fileNo; /* API */ @@ -150,13 +138,18 @@ */ void (*reset) (struct ANTLR3_INPUT_STREAM_struct * input); - /** - * Pinter to function that installs a version of LA that always - * returns upper case. Only valid for character streams and creates a case - * insensitive lexer if the lexer tokens are described in upper case. The - * tokens will preserve case in the token text. - */ - void (*setUcaseLA) (pANTLR3_INPUT_STREAM input, ANTLR3_BOOLEAN flag); + /** Pointer to a function that reuses and resets an input stream by + * supplying a new 'source' + */ + void (*reuse) (struct ANTLR3_INPUT_STREAM_struct * input, pANTLR3_UINT8 inString, ANTLR3_UINT32 size, pANTLR3_UINT8 name); + + /** + * Pointer to function that installs a version of LA that always + * returns upper case. Only valid for character streams and creates a case + * insensitive lexer if the lexer tokens are described in upper case. The + * tokens will preserve case in the token text. + */ + void (*setUcaseLA) (pANTLR3_INPUT_STREAM input, ANTLR3_BOOLEAN flag); /** Pointer to function to return input stream element at 1 based * offset from nextChar. Same as _LA for char stream, but token @@ -204,25 +197,41 @@ void (*setCharPositionInLine) (struct ANTLR3_INPUT_STREAM_struct * input, ANTLR3_UINT32 position); /** Pointer to function to override the default newline character that the input stream - * looks for to trigger the line and offset and line buffer recording information. + * looks for to trigger the line/offset and line buffer recording information. * \remark - * - By default the chracter '\n' will be instaleldas tehe newline trigger character. When this + * - By default the chracter '\n' will be installed as the newline trigger character. When this * character is seen by the consume() function then the current line number is incremented and the * current line offset is reset to 0. The Pointer for the line of input we are consuming * is updated to point to the next character after this one in the input stream (which means it - * may become invlaid if the last newline character in the file is seen (so watch out). - * - If for some reason you do not want teh counters and pointesr to be restee, yu can set the - * chracter to some impossible charater such as '\0' or whatever. - * - This is a single character only, so choose the last chracter in a sequence of two or more. - * - This is only a simple aid to error reporting - if you have a complicated binary inptu structure + * may become invalid if the last newline character in the file is seen (so watch out). + * - If for some reason you do not want the counters and pointers to be restee, you can set the + * chracter to some impossible character such as '\0' or whatever. + * - This is a single character only, so choose the last character in a sequence of two or more. + * - This is only a simple aid to error reporting - if you have a complicated binary input structure * it may not be adequate, but you can always override every function in the input stream with your * own of course, and can even write your own complete input stream set if you like. - * - It is your responsiblity to set a valid cahracter for the input stream type. Ther is no point - * setting this to 0xFFFFFFFF if the input stream is 8 bit ASCII as this will just be truncated and never + * - It is your responsiblity to set a valid character for the input stream type. There is no point + * setting this to 0xFFFFFFFF if the input stream is 8 bit ASCII, as this will just be truncated and never * trigger as the comparison will be (INT32)0xFF == (INT32)0xFFFFFFFF */ void (*SetNewLineChar) (struct ANTLR3_INPUT_STREAM_struct * input, ANTLR3_UINT32 newlineChar); + /// Character that automatically causes an internal line count + /// increment. + /// + ANTLR3_UCHAR newlineChar; + + /// Indicates the size, in 8 bit units, of a single character. Note that + /// the C runtime does not deal with surrogates as this would be + /// slow and complicated. If this is a UTF-8 stream then this field + /// will be set to 0. Generally you are best working internally with 32 bit characters + /// as this is the most efficient. + /// + ANTLR3_UINT8 charByteSize; + + /// Indicates the encoding scheme used in this input stream + /// + ANTLR3_UINT32 encoding; } ANTLR3_INPUT_STREAM; @@ -257,12 +266,14 @@ } ANTLR3_LEX_STATE; - /* Prototypes - */ - void antlr3AsciiSetupStream (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 type); - void antlr3UCS2SetupStream (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 type); - void antlr3GenericSetupStream (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 type); - +/* Prototypes + */ +void antlr38BitSetupStream (pANTLR3_INPUT_STREAM input); +void antlr3UTF16SetupStream (pANTLR3_INPUT_STREAM input, ANTLR3_BOOLEAN machineBigEndian, ANTLR3_BOOLEAN inputBigEndian); +void antlr3UTF32SetupStream (pANTLR3_INPUT_STREAM input, ANTLR3_BOOLEAN machineBigEndian, ANTLR3_BOOLEAN inputBigEndian); +void antlr3UTF8SetupStream (pANTLR3_INPUT_STREAM input); +void antlr3EBCDICSetupStream (pANTLR3_INPUT_STREAM input); +void antlr3GenericSetupStream (pANTLR3_INPUT_STREAM input); #ifdef __cplusplus } #endif diff -Nru libantlr3c-3.2/include/antlr3lexer.h libantlr3c-3.4+dfsg/include/antlr3lexer.h --- libantlr3c-3.2/include/antlr3lexer.h 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/include/antlr3lexer.h 2011-06-22 22:32:16.000000000 +0000 @@ -145,11 +145,9 @@ ANTLR3_BOOLEAN (*matchs) (struct ANTLR3_LEXER_struct * lexer, ANTLR3_UCHAR * string); /** Pointer to a function that matches and consumes the specified character from the input stream. - * As the input stream is required to provide characters via LA() as UTF32 characters it does not - * need to provide an implementation if it is not sourced from 8 bit ASCII. The default lexer - * implementation is source encoding agnostic, unless for some reason it takes two 32 bit characters - * to specify a single character, in which case the input stream and the lexer rules would have to match - * in encoding and then it would work 'by accident' anyway. + * The input stream is required to provide characters via LA() as UTF32 characters. The default lexer + * implementation is source encoding agnostic and so input streams do not generally need to + * override the default implmentation. */ ANTLR3_BOOLEAN (*matchc) (struct ANTLR3_LEXER_struct * lexer, ANTLR3_UCHAR c); diff -Nru libantlr3c-3.2/include/antlr3string.h libantlr3c-3.4+dfsg/include/antlr3string.h --- libantlr3c-3.2/include/antlr3string.h 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/include/antlr3string.h 2011-06-22 22:32:16.000000000 +0000 @@ -81,42 +81,41 @@ ANTLR3_UINT8 encoding; /** Pointer to function that sets the string value to a specific string in the default encoding - * for this string. For instance, if this is ASCII 8 bit, then this function is the same as set8 - * but if the encoding is 16 bit, then the pointer is assumed to point to 16 bit characters not + * for this string. For instance, if this is 8 bit, then this function is the same as set8 + * but if the encoding is UTF16, then the pointer is assumed to point to UTF16 characters, not * 8 bit. */ pANTLR3_UINT8 (*set) (struct ANTLR3_STRING_struct * string, const char * chars); /** Pointer to function that sets the string value to a specific 8 bit string in the default encoding - * for this string. For instance, if this is a 16 bit string, then this function is the same as set8 - * but if the encoding is 16 bit, then the pointer is assumed to point to 8 bit characters that must - * be converted to 16 bit characters on the fly. + * for this string. For instance, if this is an 8 bit string, then this function is the same as set8 + * but if the encoding is UTF16, then the pointer is assumed to point to 8 bit characters that must + * be converted to UTF16 characters on the fly. */ pANTLR3_UINT8 (*set8) (struct ANTLR3_STRING_struct * string, const char * chars); /** Pointer to function adds a raw char * type pointer in the default encoding - * for this string. For instance, if this is ASCII 8 bit, then this function is the same as append8 - * but if the encoding is 16 bit, then the pointer is assumed to point to 16 bit characters not + * for this string. For instance, if this is 8 bit, then this function is the same as append8 + * but if the encoding is UTF16, then the pointer is assumed to point to UTF16 characters not * 8 bit. */ pANTLR3_UINT8 (*append) (struct ANTLR3_STRING_struct * string, const char * newbit); /** Pointer to function adds a raw char * type pointer in the default encoding - * for this string. For instance, if this is a 16 bit string, then this function assumes the pointer + * for this string. For instance, if this is a UTF16 string, then this function assumes the pointer * points to 8 bit characters that must be converted on the fly. */ pANTLR3_UINT8 (*append8) (struct ANTLR3_STRING_struct * string, const char * newbit); /** Pointer to function that inserts the supplied string at the specified * offset in the current string in the default encoding for this string. For instance, if this is an 8 - * bit string, then this is the same as insert8, but if this is a 16 bit string, then the poitner - * must point to 16 bit characters. - * + * bit string, then this is the same as insert8, but if this is a UTF16 string, then the pointer + * must point to UTF16 characters. */ pANTLR3_UINT8 (*insert) (struct ANTLR3_STRING_struct * string, ANTLR3_UINT32 point, const char * newbit); /** Pointer to function that inserts the supplied string at the specified - * offset in the current string in the default encoding for this string. For instance, if this is a 16 bit string + * offset in the current string in the default encoding for this string. For instance, if this is a UTF16 string * then the pointer is assumed to point at 8 bit characteres that must be converted on the fly. */ pANTLR3_UINT8 (*insert8) (struct ANTLR3_STRING_struct * string, ANTLR3_UINT32 point, const char * newbit); @@ -142,7 +141,7 @@ pANTLR3_UINT8 (*inserti) (struct ANTLR3_STRING_struct * string, ANTLR3_UINT32 point, ANTLR3_INT32 i); /** Pointer to function that adds a single character to the end of the string, in the encoding of the - * string - 8 bit, 16 bit, utf-8 etc. Input is a single UTF32 (32 bits wide integer) character. + * string - 8 bit, UTF16, utf-8 etc. Input is a single UTF32 (32 bits wide integer) character. */ pANTLR3_UINT8 (*addc) (struct ANTLR3_STRING_struct * string, ANTLR3_UINT32 c); @@ -227,8 +226,8 @@ pANTLR3_STRING (*newSize) (struct ANTLR3_STRING_FACTORY_struct * factory, ANTLR3_UINT32 size); /** Pointer to function that manufactures a string from a given pointer and length. The pointer is assumed - * to point to characters in the same encoding as the string type, hence if this is a 16 bit string the - * pointer should point to 16 bit characters. + * to point to characters in the same encoding as the string type, hence if this is a UTF16 string the + * pointer should point to UTF16 characters. */ pANTLR3_STRING (*newPtr) (struct ANTLR3_STRING_FACTORY_struct * factory, pANTLR3_UINT8 string, ANTLR3_UINT32 size); @@ -238,7 +237,7 @@ pANTLR3_STRING (*newPtr8) (struct ANTLR3_STRING_FACTORY_struct * factory, pANTLR3_UINT8 string, ANTLR3_UINT32 size); /** Pointer to function that manufactures a string from a given pointer and works out the length. The pointer is - * assumed to point to characters in the same encoding as the string itself, i.e. 16 bit if a 16 bit + * assumed to point to characters in the same encoding as the string itself, i.e. UTF16 if a UTF16 * string and so on. */ pANTLR3_STRING (*newStr) (struct ANTLR3_STRING_FACTORY_struct * factory, pANTLR3_UINT8 string); diff -Nru libantlr3c-3.2/include/antlr3stringstream.h libantlr3c-3.4+dfsg/include/antlr3stringstream.h --- libantlr3c-3.2/include/antlr3stringstream.h 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/include/antlr3stringstream.h 1970-01-01 00:00:00.000000000 +0000 @@ -1,36 +0,0 @@ -#ifndef _ANTLR3_STRINGSTREAM_H -#define _ANTLR3_STRINGSTREAM_H - -// [The "BSD licence"] -// Copyright (c) 2005-2009 Jim Idle, Temporal Wave LLC -// http://www.temporal-wave.com -// http://www.linkedin.com/in/jimidle -// -// All rights reserved. -// -// Redistribution and use in source and binary forms, with or without -// modification, are permitted provided that the following conditions -// are met: -// 1. Redistributions of source code must retain the above copyright -// notice, this list of conditions and the following disclaimer. -// 2. Redistributions in binary form must reproduce the above copyright -// notice, this list of conditions and the following disclaimer in the -// documentation and/or other materials provided with the distribution. -// 3. The name of the author may not be used to endorse or promote products -// derived from this software without specific prior written permission. -// -// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -// OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -// IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -// NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -// THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -#include - - -#endif diff -Nru libantlr3c-3.2/include/antlr3tokenstream.h libantlr3c-3.4+dfsg/include/antlr3tokenstream.h --- libantlr3c-3.2/include/antlr3tokenstream.h 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/include/antlr3tokenstream.h 2011-06-22 22:32:16.000000000 +0000 @@ -171,9 +171,11 @@ pANTLR3_STRING (*toStringTT) (struct ANTLR3_TOKEN_STREAM_struct * tokenStream, pANTLR3_COMMON_TOKEN start, pANTLR3_COMMON_TOKEN stop); - /** Function that sets the token stream into debugging mode - */ - void (*setDebugListener) (struct ANTLR3_TOKEN_STREAM_struct * tokenStream, pANTLR3_DEBUG_EVENT_LISTENER debugger); + /** Function that sets the token stream into debugging mode + */ + void (*setDebugListener) (struct ANTLR3_TOKEN_STREAM_struct * tokenStream, pANTLR3_DEBUG_EVENT_LISTENER debugger); + + /** Function that knows how to free the memory for an ANTLR3_TOKEN_STREAM */ @@ -279,6 +281,14 @@ pANTLR3_LIST (*getTokensType) (struct ANTLR3_COMMON_TOKEN_STREAM_struct * tokenStream, ANTLR3_UINT32 start, ANTLR3_UINT32 stop, ANTLR3_UINT32 type); + /** Function that resets the token stream so that it can be reused, but + * but that does not free up any resources, such as the token factory + * the factory pool and so on. This prevents the need to keep freeing + * and reallocating the token pools if the thing you are building is + * a multi-shot dameon or somethign like that. It is much faster to + * just reuse all the vectors. + */ + void (*reset) (struct ANTLR3_COMMON_TOKEN_STREAM_struct * tokenStream); /** Function that knows how to free an ANTLR3_COMMON_TOKEN_STREAM */ diff -Nru libantlr3c-3.2/INSTALL libantlr3c-3.4+dfsg/INSTALL --- libantlr3c-3.2/INSTALL 2009-12-11 22:55:09.000000000 +0000 +++ libantlr3c-3.4+dfsg/INSTALL 2011-07-19 18:14:25.000000000 +0000 @@ -1,16 +1,25 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free -Software Foundation, Inc. +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, +2006, 2007, 2008, 2009 Free Software Foundation, Inc. -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== -These are generic installation instructions. + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -23,9 +32,9 @@ It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. (Caching is +the results of its tests to speed up reconfiguring. Caching is disabled by default to prevent problems with accidental use of stale -cache files.) +cache files. If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail @@ -35,30 +44,37 @@ may remove or edit it. The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You only need -`configure.ac' if you want to change it or regenerate `configure' using -a newer version of `autoconf'. +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. + `./configure' to configure the package for your system. - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. - 5. You can remove the program binaries and object files from the + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,45 +83,69 @@ all sorts of other programs in order to regenerate files that came with the distribution. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + Compilers and Options ===================== -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: - ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + ./configure CC=c99 CFLAGS=-g LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== -You can compile the package for more than one kind of computer at the + You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the +own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. - If you have to use a `make' that does not support the `VPATH' -variable, you have to compile the package for one architecture at a -time in the source code directory. After you have installed the -package for one architecture, use `make distclean' before reconfiguring -for another architecture. + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. Installation Names ================== -By default, `make install' installs the package's commands under + By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -116,16 +156,47 @@ In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to + Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The @@ -137,14 +208,53 @@ you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: @@ -152,7 +262,8 @@ where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -170,9 +281,9 @@ Sharing Defaults ================ -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. @@ -181,7 +292,7 @@ Defining Variables ================== -Variables not defined in a site shell script can be set in the + Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set @@ -190,21 +301,29 @@ ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). Here is a another example: +overridden in the site shell script). - /bin/bash ./configure CONFIG_SHELL=/bin/bash +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: -Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent -configuration-related scripts to be executed by `/bin/bash'. + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash `configure' Invocation ====================== -`configure' recognizes the following options to control how it operates. + `configure' recognizes the following options to control how it +operates. `--help' `-h' - Print a summary of the options to `configure', and exit. + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. `--version' `-V' @@ -231,6 +350,16 @@ Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. diff -Nru libantlr3c-3.2/install-sh libantlr3c-3.4+dfsg/install-sh --- libantlr3c-3.2/install-sh 2009-12-11 22:55:09.000000000 +0000 +++ libantlr3c-3.4+dfsg/install-sh 2011-07-19 18:14:25.000000000 +0000 @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2005-05-14.22 +scriptversion=2009-04-28.21; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -39,38 +39,68 @@ # when there is no Makefile. # # This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. +# from scratch. + +nl=' +' +IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi -# put in absolute paths if you don't have them in your path; or use env. vars. +# Put in absolute file names if you don't have them in your path; +# or use environment vars. -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 -chmodcmd="$chmodprog 0755" -chowncmd= chgrpcmd= -stripcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog rmcmd="$rmprog -f" -mvcmd="$mvprog" +stripcmd= + src= dst= dir_arg= -dstarg= +dst_arg= + +copy_on_change=false no_target_directory= -usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... @@ -80,81 +110,86 @@ In the 4th, create DIRECTORIES. Options: --c (ignored) --d create directories instead of installing files. --g GROUP $chgrpprog installed files to GROUP. --m MODE $chmodprog installed files to MODE. --o USER $chownprog installed files to USER. --s $stripprog installed files. --t DIRECTORY install into DIRECTORY. --T report an error if DSTFILE is a directory. ---help display this help and exit. ---version display version info and exit. + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG " -while test -n "$1"; do +while test $# -ne 0; do case $1 in - -c) shift - continue;; + -c) ;; - -d) dir_arg=true - shift - continue;; + -C) copy_on_change=true;; + + -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; + shift;; --help) echo "$usage"; exit $?;; - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t) dstarg=$2 - shift - shift - continue;; - - -T) no_target_directory=true - shift - continue;; + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + shift;; + + -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; - *) # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - test -n "$dir_arg$dstarg" && break - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dstarg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dstarg" - shift # fnord - fi - shift # arg - dstarg=$arg - done + --) shift break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; esac + shift done -if test -z "$1"; then +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + done +fi + +if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 @@ -164,24 +199,47 @@ exit 0 fi +if test -z "$dir_arg"; then + trap '(exit $?); exit' 1 2 13 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + for src do # Protect names starting with `-'. case $src in - -*) src=./$src ;; + -*) src=./$src;; esac if test -n "$dir_arg"; then dst=$src - src= - - if test -d "$dst"; then - mkdircmd=: - chmodcmd= - else - mkdircmd=$mkdirprog - fi + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. @@ -190,71 +248,199 @@ exit 1 fi - if test -z "$dstarg"; then + if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi - dst=$dstarg + dst=$dst_arg # Protect names starting with `-'. case $dst in - -*) dst=./$dst ;; + -*) dst=./$dst;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then - echo "$0: $dstarg: Is a directory" >&2 + echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi - dst=$dst/`basename "$src"` + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? fi fi - # This sed command emulates the dirname command. - dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` - - # Make sure that the destination directory exists. + obsolete_mkdir_used=false - # Skip lots of stat calls in the usual case. - if test ! -d "$dstdir"; then - defaultIFS=' - ' - IFS="${IFS-$defaultIFS}" - - oIFS=$IFS - # Some sh's can't handle IFS=/ for some reason. - IFS='%' - set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` - shift - IFS=$oIFS + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac - pathcomp= + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else - while test $# -ne 0 ; do - pathcomp=$pathcomp$1 + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + -*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir shift - if test ! -d "$pathcomp"; then - $mkdirprog "$pathcomp" - # mkdir can fail with a `File exist' error in case several - # install-sh are creating the directory concurrently. This - # is OK. - test -d "$pathcomp" || exit + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test -z "$d" && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true fi - pathcomp=$pathcomp/ - done + fi fi if test -n "$dir_arg"; then - $doit $mkdircmd "$dst" \ - && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } - + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else - dstfile=`basename "$dst"` # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ @@ -262,10 +448,9 @@ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - trap '(exit $?); exit' 1 2 13 15 # Copy the file name to the temp name. - $doit $cpprog "$src" "$dsttmp" && + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # @@ -273,51 +458,63 @@ # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && - - # Now rename the file to the real destination. - { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ - || { - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - if test -f "$dstdir/$dstfile"; then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ - || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ - || { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit 1 - } - else - : - fi - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" - } - } - fi || { (exit 1); exit 1; } -done + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || -# The final little trick to "correctly" pass the exit status to the exit trap. -{ - (exit 0); exit 0 -} + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: diff -Nru libantlr3c-3.2/ltmain.sh libantlr3c-3.4+dfsg/ltmain.sh --- libantlr3c-3.2/ltmain.sh 2007-01-07 05:02:45.000000000 +0000 +++ libantlr3c-3.4+dfsg/ltmain.sh 2011-07-19 18:14:22.000000000 +0000 @@ -1,30 +1,128 @@ -# ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun configure. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify +# Generated from ltmain.m4sh. + +# libtool (GNU libtool) 2.2.10 +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +# 2007, 2008, 2009, 2010 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # -# This program is distributed in the hope that it will be useful, but +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. # -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --no-quiet, --no-silent +# print informational messages (default) +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print more informational messages than default +# --no-verbose don't print the extra informational messages +# --version print version information +# -h, --help, --help-all print short, long, or detailed help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. When passed as first option, +# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.2.10 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to . + +PROGRAM=libtool +PACKAGE=libtool +VERSION=2.2.10 +TIMESTAMP="" +package_revision=1.3175 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# NLS nuisances: We save the old values to restore during execute mode. +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done +LC_ALL=C +LANGUAGE=C +export LANGUAGE LC_ALL + +$lt_unset CDPATH -basename="s,^.*/,,g" # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of @@ -33,123 +131,383 @@ # function. progpath="$0" -# The name of this program: -progname=`echo "$progpath" | $SED $basename` -modename="$progname" + + +: ${CP="cp -f"} +test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${EGREP="/bin/grep -E"} +: ${FGREP="/bin/grep -F"} +: ${GREP="/bin/grep"} +: ${LN_S="ln -s"} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SED="/bin/sed"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. -PROGRAM=ltmain.sh -PACKAGE=libtool -VERSION=1.5.22 -TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" +exit_status=$EXIT_SUCCESS -# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" -# Check that we have a working $echo. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$progpath" --no-reexec ${1+"$@"} -fi +dirname="s,/[^/]*$,," +basename="s,^.*/,," -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <&2 - $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE -fi +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} -# Global variables. -mode=$default_mode -nonopt= -prev= -prevopt= -run= -show="$echo" -show_help= -execute_dlfiles= -duplicate_deps=no -preserve_args= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" -extracted_archives= -extracted_serial=0 + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + done + my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} -##################################### -# Shell function definitions: -# This seems to be the best place for them # func_mktempdir [string] # Make a temporary directory that won't clash with other running @@ -159,7 +517,7 @@ { my_template="${TMPDIR-/tmp}/${1-$progname}" - if test "$run" = ":"; then + if test "$opt_dry_run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else @@ -168,519 +526,791 @@ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then - # Failing that, at least try and use $RANDOM to avoid a race - my_tmpdir="${my_template}-${RANDOM-0}$$" + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" - save_mktempdir_umask=`umask` - umask 0077 - $mkdir "$my_tmpdir" - umask $save_mktempdir_umask + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure - test -d "$my_tmpdir" || { - $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 - exit $EXIT_FAILURE - } + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi - $echo "X$my_tmpdir" | $Xsed + $ECHO "$my_tmpdir" } -# func_win32_libid arg -# return the library type of file 'arg' -# -# Need a lot of goo to handle *both* DLLs and import libs -# Has to be a shell function in order to 'eat' the argument -# that is supplied when $file_magic_command is called. -func_win32_libid () +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () { - win32_libid_type="unknown" - win32_fileres=`file -L $1 2>/dev/null` - case $win32_fileres in - *ar\ archive\ import\ library*) # definitely import - win32_libid_type="x86 archive import" - ;; - *ar\ archive*) # could be an import, or static - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ - $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then - win32_nmres=`eval $NM -f posix -A $1 | \ - $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` - case $win32_nmres in - import*) win32_libid_type="x86 archive import";; - *) win32_libid_type="x86 archive static";; - esac - fi - ;; - *DLL*) - win32_libid_type="x86 DLL" - ;; - *executable*) # but shell scripts are "executable" too... - case $win32_fileres in - *MS\ Windows\ PE\ Intel*) - win32_libid_type="x86 DLL" - ;; + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" esac - ;; - esac - $echo $win32_libid_type } -# func_infer_tag arg -# Infer tagged configuration to use if any are available and -# if one wasn't chosen via the "--tag" command line option. -# Only attempt this if the compiler in the base compile -# command doesn't match the default compiler. -# arg is usually of the form 'gcc ...' -func_infer_tag () +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () { - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" - done - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "$1" | $SED \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) - for z in $available_tags; do - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" - done - case "$@ " in - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - $echo "$modename: unable to infer tagged configuration" - $echo "$modename: specify a tag with \`--tag'" 1>&2 - exit $EXIT_FAILURE -# else -# $echo "$modename: using $tagname tagged configuration" - fi - ;; - esac - fi + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" } -# func_extract_an_archive dir oldlib -func_extract_an_archive () +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () { - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" + my_cmd="$1" + my_fail_exp="${2-:}" - $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" - $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : - else - $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 - exit $EXIT_FAILURE + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi fi } -# func_extract_archives gentop oldlib ... -func_extract_archives () + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () { - my_gentop="$1"; shift - my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" - my_status="" + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } - $show "${rm}r $my_gentop" - $run ${rm}r "$my_gentop" - $show "$mkdir $my_gentop" - $run $mkdir "$my_gentop" - my_status=$? - if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then - exit $my_status + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi fi +} - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` - my_xlib_u=$my_xlib - while :; do - case " $extracted_archives " in - *" $my_xlib_u "*) - extracted_serial=`expr $extracted_serial + 1` - my_xlib_u=lt$extracted_serial-$my_xlib ;; - *) break ;; - esac - done - extracted_archives="$extracted_archives $my_xlib_u" - my_xdir="$my_gentop/$my_xlib_u" - $show "${rm}r $my_xdir" - $run ${rm}r "$my_xdir" - $show "$mkdir $my_xdir" - $run $mkdir "$my_xdir" - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then - exit $exit_status - fi - case $host in - *-darwin*) - $show "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - if test -z "$run"; then - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` - darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` - if test -n "$darwin_arches"; then - darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - $show "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - func_extract_an_archive "`pwd`" "${darwin_base_archive}" - cd "$darwin_curdir" - $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" - done # $darwin_arches - ## Okay now we have a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` - lipo -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - ${rm}r unfat-$$ - cd "$darwin_orig_dir" - else - cd "$darwin_orig_dir" - func_extract_an_archive "$my_xdir" "$my_xabs" - fi # $darwin_arches - fi # $run - ;; - *) - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done - func_extract_archives_result="$my_oldobjs" +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $SED -n '/(C)/!b go + :more + /\./!{ + N + s/\n# / / + b more + } + :go + /^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $SED -n '/^# Usage:/,/^# *.*--help/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + echo + $ECHO "run \`$progname --help | more' for full usage" + exit $? } -# End of Shell function definitions -##################################### -# Darwin sucks -eval std_shrext=\"$shrext_cmds\" +# func_help [NOEXIT] +# Echo long help message to standard output and exit, +# unless 'noexit' is passed as argument. +func_help () +{ + $SED -n '/^# Usage:/,/# Report bugs to/ { + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ + p + }' < "$progpath" + ret=$? + if test -z "$1"; then + exit $ret + fi +} -disable_libs=no +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + func_error "missing argument for $1." + exit_cmd=exit +} -# Parse our command line options once, thoroughly. -while test "$#" -gt 0 -do - arg="$1" - shift +exit_cmd=: - case $arg in - -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - execute_dlfiles) - execute_dlfiles="$execute_dlfiles $arg" - ;; - tag) - tagname="$arg" - preserve_args="${preserve_args}=$arg" - - # Check whether tagname contains only valid characters - case $tagname in - *[!-_A-Za-z0-9,/]*) - $echo "$progname: invalid tag name: $tagname" 1>&2 - exit $EXIT_FAILURE - ;; - esac - case $tagname in - CC) - # Don't test for the "default" C tag, as we know, it's there, but - # not specially marked. - ;; - *) - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then - taglist="$taglist $tagname" - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" - else - $echo "$progname: ignoring unknown tag $tagname" 1>&2 - fi - ;; - esac - ;; - *) - eval "$prev=\$arg" - ;; - esac - prev= - prevopt= - continue - fi - # Have we seen a non-optional argument yet? - case $arg in - --help) - show_help=yes - ;; - --version) - $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - $echo - $echo "Copyright (C) 2005 Free Software Foundation, Inc." - $echo "This is free software; see the source for copying conditions. There is NO" - $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - exit $? - ;; +magic="%%%MAGIC variable%%%" +magic_exe="%%%MAGIC EXE variable%%%" + +# Global variables. +# $mode is unset +nonopt= +execute_dlfiles= +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 + +opt_dry_run=false +opt_duplicate_deps=false +opt_silent=false +opt_debug=: + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} + + +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" - --config) - ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath # Now print the configurations for the tags. for tagname in $taglist; do - ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" done - exit $? - ;; - --debug) - $echo "$progname: enabling shell trace mode" - set -x - preserve_args="$preserve_args $arg" - ;; - - --dry-run | -n) - run=: - ;; + exit $? +} - --features) - $echo "host: $host" +# func_features +# Display the features supported by this script. +func_features () +{ + echo "host: $host" if test "$build_libtool_libs" = yes; then - $echo "enable shared libraries" + echo "enable shared libraries" else - $echo "disable shared libraries" + echo "disable shared libraries" fi if test "$build_old_libs" = yes; then - $echo "enable static libraries" + echo "enable static libraries" else - $echo "disable static libraries" + echo "disable static libraries" fi + exit $? - ;; +} + +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac - --finish) mode="finish" ;; + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" - --mode) prevopt="--mode" prev=mode ;; - --mode=*) mode="$optarg" ;; + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} - --preserve-dup-deps) duplicate_deps="yes" ;; +# Parse options once, thoroughly. This comes as soon as possible in +# the script to make things like `libtool --version' happen quickly. +{ - --quiet | --silent) - show=: - preserve_args="$preserve_args $arg" + # Shorthand for --mode=foo, only valid as the first argument + case $1 in + clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift ;; - - --tag) - prevopt="--tag" - prev=tag - preserve_args="$preserve_args --tag" + compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift ;; - --tag=*) - set tag "$optarg" ${1+"$@"} - shift - prev=tag - preserve_args="$preserve_args --tag" + execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift ;; - - -dlopen) - prevopt="-dlopen" - prev=execute_dlfiles + finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift ;; - - -*) - $echo "$modename: unrecognized option \`$arg'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE + install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift ;; - - *) - nonopt="$arg" - break + link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; + uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift ;; esac -done -if test -n "$prevopt"; then - $echo "$modename: option \`$prevopt' requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE -fi + # Parse non-mode specific arguments: + while test "$#" -gt 0; do + opt="$1" + shift -case $disable_libs in -no) - ;; -shared) - build_libtool_libs=no - build_old_libs=yes - ;; -static) - build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` - ;; -esac + case $opt in + --config) func_config ;; -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= + --debug) preserve_args="$preserve_args $opt" + func_echo "enabling shell trace mode" + opt_debug='set -x' + $opt_debug + ;; -if test -z "$show_help"; then + -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break + execute_dlfiles="$execute_dlfiles $1" + shift + ;; - # Infer the operation mode. - if test -z "$mode"; then - $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 - $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 - case $nonopt in - *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) - mode=link - for arg - do - case $arg in - -c) - mode=compile - break - ;; - esac - done - ;; - *db | *dbx | *strace | *truss) - mode=execute - ;; - *install*|cp|mv) - mode=install - ;; - *rm) - mode=uninstall + --dry-run | -n) opt_dry_run=: ;; + --features) func_features ;; + --finish) mode="finish" ;; + + --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break + case $1 in + # Valid mode arguments: + clean) ;; + compile) ;; + execute) ;; + finish) ;; + install) ;; + link) ;; + relink) ;; + uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; + esac + + mode="$1" + shift + ;; + + --preserve-dup-deps) + opt_duplicate_deps=: ;; + + --quiet|--silent) preserve_args="$preserve_args $opt" + opt_silent=: + opt_verbose=false + ;; + + --no-quiet|--no-silent) + preserve_args="$preserve_args $opt" + opt_silent=false + ;; + + --verbose| -v) preserve_args="$preserve_args $opt" + opt_silent=false + opt_verbose=: + ;; + + --no-verbose) preserve_args="$preserve_args $opt" + opt_verbose=false + ;; + + --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break + preserve_args="$preserve_args $opt $1" + func_enable_tag "$1" # tagname is set here + shift + ;; + + # Separate optargs to long options: + -dlopen=*|--mode=*|--tag=*) + func_opt_split "$opt" + set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} + shift + ;; + + -\?|-h) func_usage ;; + --help) opt_help=: ;; + --help-all) opt_help=': help-all' ;; + --version) func_version ;; + + -*) func_fatal_help "unrecognized option \`$opt'" ;; + + *) nonopt="$opt" + break + ;; + esac + done + + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: ;; *) - # If we have no mode, but dlfiles were specified, then do execute mode. - test -n "$execute_dlfiles" && mode=execute + opt_duplicate_compiler_generated_deps=$opt_duplicate_deps + ;; + esac - # Just use the default operation mode. - if test -z "$mode"; then - if test -n "$nonopt"; then - $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 - else - $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 - fi + # Having warned about all mis-specified options, bail out if + # anything was wrong. + $exit_cmd $EXIT_FAILURE +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF fi - ;; - esac + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +## ----------- ## +## Main. ## +## ----------- ## + +$opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" fi + test -z "$mode" && func_fatal_error "error: you must specify a MODE." + + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. if test -n "$execute_dlfiles" && test "$mode" != execute; then - $echo "$modename: unrecognized option \`-dlopen'" 1>&2 - $echo "$help" 1>&2 + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" - help="Try \`$modename --help --mode=$mode' for more information." + help="Try \`$progname --help --mode=$mode' for more information." +} - # These modes are in order of execution frequency so that they run quickly. - case $mode in - # libtool compile mode - compile) - modename="$modename: compile" - # Get the compilation command and the source file. - base_compile= - srcfile="$nonopt" # always keep a non-empty value in "srcfile" - suppress_opt=yes - suppress_output= - arg_mode=normal - libobj= - later= - for arg - do - case $arg_mode in - arg ) - # do not "continue". Instead, add this to base_compile - lastarg="$arg" - arg_mode=normal - ;; +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} - target ) - libobj="$arg" - arg_mode=normal - continue - ;; +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} - normal ) - # Accept any command-line options. - case $arg in - -o) - if test -n "$libobj" ; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit $EXIT_FAILURE - fi - arg_mode=target - continue - ;; +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} - -static | -prefer-pic | -prefer-non-pic) - later="$later $arg" - continue - ;; +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_ltwrapper_scriptname_result="" + if func_ltwrapper_executable_p "$1"; then + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" + fi +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_quote_for_eval "$arg" + CC_quoted="$CC_quoted $func_quote_for_eval_result" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case "$@ " in + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi + + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T <\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - lastarg="$lastarg $arg" + func_quote_for_eval "$arg" + lastarg="$lastarg $func_quote_for_eval_result" done IFS="$save_ifs" - lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result # Add the arguments to base_compile. base_compile="$base_compile $lastarg" continue ;; - * ) + *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # @@ -729,65 +1353,42 @@ esac # case $arg_mode # Aesthetically quote the previous argument. - lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` - - case $lastarg in - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, and some SunOS ksh mistreat backslash-escaping - # in scan sets (worked around with variable expansion), - # and furthermore cannot handle '|' '&' '(' ')' in scan sets - # at all, so we specify them separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - lastarg="\"$lastarg\"" - ;; - esac - - base_compile="$base_compile $lastarg" + func_quote_for_eval "$lastarg" + base_compile="$base_compile $func_quote_for_eval_result" done # for arg case $arg_mode in arg) - $echo "$modename: you must specify an argument for -Xcompile" - exit $EXIT_FAILURE + func_fatal_error "you must specify an argument for -Xcompile" ;; target) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "you must specify a target with \`-o'" ;; *) # Get the name of the library object. - [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSifmso]' case $libobj in - *.ada) xform=ada ;; - *.adb) xform=adb ;; - *.ads) xform=ads ;; - *.asm) xform=asm ;; - *.c++) xform=c++ ;; - *.cc) xform=cc ;; - *.ii) xform=ii ;; - *.class) xform=class ;; - *.cpp) xform=cpp ;; - *.cxx) xform=cxx ;; - *.f90) xform=f90 ;; - *.for) xform=for ;; - *.java) xform=java ;; - *.obj) xform=obj ;; + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup) + func_xform "$libobj" + libobj=$func_xform_result + ;; esac - libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - case $libobj in - *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) - $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot determine name of library object from \`$libobj'" ;; esac @@ -795,7 +1396,15 @@ for arg in $later; do case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; + -static) + build_libtool_libs=no build_old_libs=yes continue ;; @@ -812,28 +1421,17 @@ esac done - qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` - case $qlibobj in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qlibobj="\"$qlibobj\"" ;; - esac - test "X$libobj" != "X$qlibobj" \ - && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." - objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir= - else - xdir=$xdir/ - fi + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" lobj=${xdir}$objdir/$objname - if test -z "$base_compile"; then - $echo "$modename: you must specify a compilation command" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then @@ -842,12 +1440,9 @@ removelist="$lobj $libobj ${libobj}T" fi - $run $rm $removelist - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 - # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in - cygwin* | mingw* | pw32* | os2*) + cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac @@ -859,10 +1454,8 @@ # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" - removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 else output_obj= need_locks=no @@ -872,13 +1465,13 @@ # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then - until $run ln "$progpath" "$lockfile" 2>/dev/null; do - $show "Waiting for $lockfile to be removed" + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then - $echo "\ + $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` @@ -889,34 +1482,22 @@ avoid parallel builds (make -j) in this platform, or get a better compiler." - $run $rm $removelist + $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi - $echo "$srcfile" > "$lockfile" + removelist="$removelist $output_obj" + $ECHO "$srcfile" > "$lockfile" fi + $opt_dry_run || $RM $removelist + removelist="$removelist $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi - qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` - case $qsrcfile in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qsrcfile="\"$qsrcfile\"" ;; - esac - - $run $rm "$libobj" "${libobj}T" - - # Create a libtool object file (analogous to a ".la" file), - # but don't create it if we're doing a dry run. - test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then - $echo "\ + $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -969,45 +1537,27 @@ avoid parallel builds (make -j) in this platform, or get a better compiler." - $run $rm $removelist + $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - $show "$mv $output_obj $lobj" - if $run $mv $output_obj $lobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi - # Append the name of the PIC object to the libtool object file. - test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then - $echo "\ + $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -1041,5448 +1586,6950 @@ avoid parallel builds (make -j) in this platform, or get a better compiler." - $run $rm $removelist + $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - $show "$mv $output_obj $obj" - if $run $mv $output_obj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi - - # Append the name of the non-PIC object the libtool object file. - # Only append if the libtool object file exists. - test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - -static) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=built - ;; - -static-libtool-libs) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - esac - build_libtool_libs=no - build_old_libs=yes - break - ;; - esac - done +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - # Go through the arguments, transforming them on the way. - while test "$#" -gt 0; do - arg="$1" - shift - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test - ;; - *) qarg=$arg ;; - esac - libtool_args="$libtool_args $qarg" +Compile a source file into a libtool library object. - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - output) - compile_command="$compile_command @OUTPUT@" - finalize_command="$finalize_command @OUTPUT@" - ;; - esac +This mode accepts the following additional options: - case $prev in - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. - compile_command="$compile_command @SYMFILE@" - finalize_command="$finalize_command @SYMFILE@" - preload=yes - fi - case $arg in - *.la | *.lo) ;; # We handle these cases below. - force) - if test "$dlself" = no; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test "$prev" = dlprefiles; then - dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - else - dlprefiles="$dlprefiles $arg" - fi - prev= - continue - ;; - esac - ;; - expsyms) - export_symbols="$arg" - if test ! -f "$arg"; then - $echo "$modename: symbol file \`$arg' does not exist" - exit $EXIT_FAILURE - fi - prev= - continue - ;; - expsyms_regex) - export_symbols_regex="$arg" - prev= - continue - ;; - inst_prefix) - inst_prefix_dir="$arg" - prev= - continue - ;; - precious_regex) - precious_files_regex="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat $save_arg` - do -# moreargs="$moreargs $fil" - arg=$fil - # A libtool-controlled object. + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to build PIC objects only + -prefer-non-pic try to build non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler - # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. - # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE - fi + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi +Automatically set library path, then run a program. - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" +This mode accepts the following additional options: - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi + -dlopen FILE add the directory containing FILE to the library path - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi +This mode sets the library path environment variable according to \`-dlopen' +flags. - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" +Then, COMMAND is executed, with ARGS as arguments." + ;; - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE - else - # Dry-run case. + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi +Complete the installation of libtool libraries. - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - fi - done - else - $echo "$modename: link input file \`$save_arg' does not exist" - exit $EXIT_FAILURE - fi - arg=$save_arg - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case $arg in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE - ;; - esac - if test "$prev" = rpath; then - case "$rpath " in - *" $arg "*) ;; - *) rpath="$rpath $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) xrpath="$xrpath $arg" ;; - esac - fi - prev= - continue - ;; - xcompiler) - compiler_flags="$compiler_flags $qarg" - prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" - continue - ;; - xlinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $wl$qarg" - prev= - compile_command="$compile_command $wl$qarg" - finalize_command="$finalize_command $wl$qarg" - continue - ;; - xcclinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $qarg" - prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" - continue - ;; - shrext) - shrext_cmds="$arg" - prev= - continue - ;; - darwin_framework|darwin_framework_skip) - test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - prev= - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi # test -n "$prev" +Each LIBDIR is a directory that contains libtool libraries. - prevarg="$arg" +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; - case $arg in - -all-static) - if test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 - continue - ;; + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... - -avoid-version) - avoid_version=yes - continue - ;; +Install executables or libraries. - -dlopen) - prev=dlfiles - continue - ;; +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. - -dlpreopen) - prev=dlprefiles - continue - ;; +The following components of INSTALL-COMMAND are treated specially: - -export-dynamic) - export_dynamic=yes - continue - ;; + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: more than one -exported-symbols argument is not allowed" - exit $EXIT_FAILURE - fi - if test "X$arg" = "X-export-symbols"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; - -framework|-arch|-isysroot) - case " $CC " in - *" ${arg} ${1} "* | *" ${arg} ${1} "*) - prev=darwin_framework_skip ;; - *) compiler_flags="$compiler_flags $arg" - prev=darwin_framework ;; - esac - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - continue - ;; + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... - -inst-prefix-dir) - prev=inst_prefix - continue - ;; +Link object files or libraries together to form another library, or to +create an executable program. - # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* - # so, if we see these flags be careful not to treat them like -L - -L[A-Z][A-Z]*:*) - case $with_gcc/$host in - no/*-*-irix* | /*-*-irix*) - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - ;; - esac - continue - ;; +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. - -L*) - dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - absdir="$dir" - notinst_path="$notinst_path $dir" - fi - dir="$absdir" - ;; - esac - case "$deplibs " in - *" -L$dir "*) ;; - *) - deplibs="$deplibs -L$dir" - lib_search_path="$lib_search_path $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$dir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - *) dllsearchpath="$dllsearchpath:$testbindir";; - esac - ;; - esac - continue - ;; +The following components of LINK-COMMAND are treated specially: - -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) - # These systems don't actually have a C or math library (as such) - continue - ;; - *-*-os2*) - # These systems don't actually have a C library (as such) - test "X$arg" = "X-lc" && continue - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs -framework System" - continue - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - test "X$arg" = "X-lc" && continue - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - test "X$arg" = "X-lc" && continue - ;; - esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi - deplibs="$deplibs $arg" - continue - ;; + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) - # Tru64 UNIX uses -model [arg] to determine the layout of C++ - # classes, name mangling, and exception handling. - -model) - compile_command="$compile_command $arg" - compiler_flags="$compiler_flags $arg" - finalize_command="$finalize_command $arg" - prev=xcompiler - continue - ;; +All other options (arguments beginning with \`-') are ignored. - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) - compiler_flags="$compiler_flags $arg" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - continue - ;; +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. - -module) - module=yes - continue - ;; +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. - # -64, -mips[0-9] enable 64-bit mode on the SGI compiler - # -r[0-9][0-9]* specifies the processor on the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler - # +DA*, +DD* enable 64-bit mode on the HP compiler - # -q* pass through compiler args for the IBM compiler - # -m* pass through architecture-specific compiler args for GCC - # -m*, -t[45]*, -txscale* pass through architecture-specific - # compiler args for GCC - # -pg pass through profiling flag for GCC - # @file GCC response files - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \ - -t[45]*|-txscale*|@*) +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - compiler_flags="$compiler_flags $arg" - continue +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." ;; - -shrext) - prev=shrext - continue - ;; + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -no-fast-install) - fast_install=no - continue - ;; +Remove libraries from an installation directory. - -no-install) - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - # The PATH hackery in wrapper scripts is required on Windows - # in order for the loader to find any dlls it needs. - $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 - $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 - fast_install=no - ;; - *) no_install=yes ;; - esac - continue - ;; +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. - -no-undefined) - allow_undefined=no - continue - ;; +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; - -objectlist) - prev=objectlist - continue - ;; + *) + func_fatal_help "invalid operation mode \`$mode'" + ;; + esac - -o) prev=output ;; + echo + $ECHO "Try \`$progname --help' for more information about other modes." +} - -precious-files-regex) - prev=precious_regex - continue - ;; +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test "$opt_help" = :; then + func_mode_help + else + { + func_help noexit + for mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | sed -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + sed '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi - -release) - prev=release - continue - ;; - -rpath) - prev=rpath - continue - ;; +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" - -R) - prev=xrpath - continue - ;; + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" - -R*) - dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - continue - ;; + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" - -static | -static-libtool-libs) - # The effects of -static are defined in a previous loop. - # We used to do the same as -all-static on platforms that - # didn't have a PIC flag, but the assumption that the effects - # would be equivalent was wrong. It would break on at least - # Digital Unix and AIX. - continue - ;; + # Read the libtool library. + dlname= + library_names= + func_source "$file" - -thread-safe) - thread_safe=yes - continue - ;; + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi - -version-info) - prev=vinfo - continue - ;; - -version-number) - prev=vinfo - vinfo_number=yes - continue - ;; + func_dirname "$file" "" "." + dir="$func_dirname_result" - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $flag" - done - IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi + fi ;; - -Wl,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $wl$flag" - linker_flags="$linker_flags $flag" - done - IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" ;; - -Xcompiler) - prev=xcompiler + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" continue ;; + esac - -Xlinker) - prev=xlinker - continue - ;; + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" - -XCClinker) - prev=xcclinker - continue - ;; + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done - # Some other compiler flag. - -* | +*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - ;; + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" - *.$objext) - # A standard object. - objs="$objs $arg" + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -* | *.la | *.lo ) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_quote_for_eval "$file" + args="$args $func_quote_for_eval_result" + done - *.lo) - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi - # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE - fi + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi +test "$mode" = execute && func_mode_execute ${1+"$@"} - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libdirs="$nonopt" + admincmds= - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE - else - # Dry-run case. + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - fi + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + exit $EXIT_SUCCESS +} - *.$libext) - # An archive. - deplibs="$deplibs $arg" - old_deplibs="$old_deplibs $arg" - continue - ;; +test "$mode" = finish && func_mode_finish ${1+"$@"} - *.la) - # A libtool-controlled library. - if test "$prev" = dlfiles; then - # This library was specified with -dlopen. - dlfiles="$dlfiles $arg" - prev= - elif test "$prev" = dlprefiles; then - # The library was specified with -dlpreopen. - dlprefiles="$dlprefiles $arg" - prev= - else - deplibs="$deplibs $arg" - fi +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + case $nonopt in *shtool*) :;; *) false;; esac; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + install_prog="$install_prog$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + no_mode=: + for arg + do + arg2= + if test -n "$dest"; then + files="$files $dest" + dest=$arg continue - ;; + fi - # Some other compiler argument. + case $arg in + -d) isdir=yes ;; + -f) + if $install_cp; then :; else + prev=$arg + fi + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + if test "x$prev" = x-m && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false + fi + prev= + else + dest=$arg + continue + fi ;; - esac # arg + esac - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + install_prog="$install_prog $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" fi - done # argument parsing loop - - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + install_shared_prog="$install_shared_prog $func_quote_for_eval_result" + done - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" - oldlibs= - # calculate the name of the file, without its directory - outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` - libobjs_save="$libobjs" + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` - else - shlib_search_path= + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + install_shared_prog="$install_shared_prog -m $func_quote_for_eval_result" + fi fi - eval sys_lib_search_path=\"$sys_lib_search_path_spec\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - # Create the object directory. - if test ! -d "$output_objdir"; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then - exit $exit_status + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" fi fi - # Determine the type of output - case $output in - "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - *.$libext) linkmode=oldlib ;; - *.lo | *.$objext) linkmode=obj ;; - *.la) linkmode=lib ;; - *) linkmode=prog ;; # Anything else should be a program. - esac + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result - case $host in - *cygwin* | *mingw* | *pw32*) - # don't eliminate duplications in $postdeps and $predeps - duplicate_compiler_generated_deps=yes - ;; + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; *) - duplicate_compiler_generated_deps=$duplicate_deps + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done ;; esac - specialdeplibs= - libs= - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do - if test "X$duplicate_deps" = "Xyes" ; then - case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - libs="$libs $deplib" - done + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" - if test "$linkmode" = lib; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; esac - pre_post_deps="$pre_post_deps $pre_post_dep" - done - fi - pre_post_deps= - fi + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi - deplibs= - newdependency_libs= - newlib_search_path= - need_relink=no # whether we're linking any uninstalled libtool libraries - notinst_deplibs= # not-installed libtool libraries - case $linkmode in - lib) - passes="conv link" - for file in $dlfiles $dlprefiles; do - case $file in - *.la) ;; - *) - $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 - exit $EXIT_FAILURE + func_dirname "$file" "/" "" + dir="$func_dirname_result" + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac ;; esac - done - ;; - prog) - compile_deplibs= - finalize_deplibs= - alldeplibs=no - newdlfiles= - newdlprefiles= - passes="conv scan dlopen dlpreopen link" - ;; - *) passes="conv" - ;; - esac - for pass in $passes; do - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" - deplibs= - fi - if test "$linkmode" = prog; then - case $pass in - dlopen) libs="$dlfiles" ;; - dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; - esac - fi - if test "$pass" = dlopen; then - # Collect dlpreopened libraries - save_deplibs="$deplibs" - deplibs= - fi - for deplib in $libs; do - lib= - found=no - case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - compiler_flags="$compiler_flags $deplib" + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' fi - continue - ;; - -l*) - if test "$linkmode" != lib && test "$linkmode" != prog; then - $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 - continue - fi - name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` - for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do - for search_ext in .la $std_shrext .so .a; do - # Search the libtool library - lib="$searchdir/lib${name}${search_ext}" - if test -f "$lib"; then - if test "$search_ext" = ".la"; then - found=yes - else - found=no - fi - break 2 - fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done - done - if test "$found" != yes; then - # deplib doesn't seem to be a libtool library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - else # deplib is a libtool library - # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, - # We need to do some special things here, and not later. - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $deplib "*) - if (${SED} -e '2q' $lib | - grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - library_names= - old_library= - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - for l in $old_library $library_names; do - ll="$l" - done - if test "X$ll" = "X$old_library" ; then # only static version available - found=no - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." - lib=$ladir/$old_library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - fi - ;; - *) ;; - esac - fi - fi - ;; # -l - -L*) - case $linkmode in - lib) - deplibs="$deplib $deplibs" - test "$pass" = conv && continue - newdependency_libs="$deplib $newdependency_libs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` - ;; - prog) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - if test "$pass" = scan; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` - ;; - *) - $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 - ;; - esac # linkmode - continue - ;; # -L - -R*) - if test "$pass" = link; then - dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - fi - deplibs="$deplib $deplibs" - continue - ;; - *.la) lib="$deplib" ;; - *.$libext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - case $linkmode in - lib) - valid_a_lib=no - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` - if eval $echo \"$deplib\" 2>/dev/null \ - | $SED 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes - fi - ;; - pass_all) - valid_a_lib=yes - ;; - esac - if test "$valid_a_lib" != yes; then - $echo - $echo "*** Warning: Trying to link with static lib archive $deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because the file extensions .$libext of this argument makes me believe" - $echo "*** that it is just a static archive that I should not used here." - else - $echo - $echo "*** Warning: Linking the shared library $output against the" - $echo "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi - continue - ;; - prog) - if test "$pass" != link; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - continue - ;; - esac # linkmode - ;; # *.$libext - *.lo | *.$objext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - elif test "$linkmode" = prog; then - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" - fi fi - continue - ;; - %DEPLIBS%) - alldeplibs=yes - continue - ;; - esac # case $deplib - if test "$found" = yes || test -f "$lib"; then : - else - $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 - exit $EXIT_FAILURE - fi - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' fi - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' - dlname= - dlopen= - dlpreopen= - libdir= - library_names= - old_library= - # If the library was installed with an old release of libtool, - # it will not redefine variables installed, or shouldnotlink - installed=yes - shouldnotlink=no - avoidtemprpath= + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + *.lo) + # Install (i.e. copy) a libtool object. - # Read the .la file - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; esac - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && dlfiles="$dlfiles $dlopen" - test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi + exit $EXIT_SUCCESS + ;; - if test "$pass" = conv; then - # Only check for convenience libraries - deplibs="$lib $deplibs" - if test -z "$libdir"; then - if test -z "$old_library"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" fi - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $ladir/$objdir/$old_library" - old_convenience="$old_convenience $ladir/$objdir/$old_library" - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - elif test "$linkmode" != prog && test "$linkmode" != lib; then - $echo "$modename: \`$lib' is not a convenience library" 1>&2 - exit $EXIT_FAILURE - fi - continue - fi # $pass = conv + ;; + esac + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi + func_source "$wrapper" - # This library was specified with -dlopen. - if test "$pass" = dlopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi - if test -z "$dlname" || - test "$dlopen_support" != yes || - test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - dlprefiles="$dlprefiles $lib $dependency_libs" + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } else - newdlfiles="$newdlfiles $lib" + # Install the binary that we compiled earlier. + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` fi - continue - fi # $pass = dlopen + fi - # We need an absolute path. - case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; - *) - abs_ladir=`cd "$ladir" && pwd` - if test -z "$abs_ladir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - abs_ladir="$ladir" - fi + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac ;; esac - laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done - # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then - if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - $echo "$modename: warning: library \`$lib' was moved." 1>&2 - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" - else - dir="$libdir" - absdir="$libdir" - fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes - else - if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir="$ladir" - absdir="$abs_ladir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - fi - fi # $installed = yes - name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" - # This library was specified with -dlpreopen. - if test "$pass" = dlpreopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - newdlprefiles="$newdlprefiles $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - newdlprefiles="$newdlprefiles $dir/$dlname" - else - newdlprefiles="$newdlprefiles $dir/$linklib" - fi - fi # $pass = dlpreopen + # Set up the ranlib parameters. + oldlib="$destdir/$name" - if test -z "$libdir"; then - # Link the convenience library - if test "$linkmode" = lib; then - deplibs="$dir/$old_library $deplibs" - elif test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$dir/$old_library $compile_deplibs" - finalize_deplibs="$dir/$old_library $finalize_deplibs" - else - deplibs="$lib $deplibs" # used for prog,scan pass - fi - continue - fi + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $oldlib" 'exit $?' + fi - if test "$linkmode" = prog && test "$pass" != link; then - newlib_search_path="$newlib_search_path $ladir" - deplibs="$lib $deplibs" + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done - linkalldeplibs=no - if test "$link_all_deplibs" != no || test -z "$library_names" || - test "$build_libtool_libs" = no; then - linkalldeplibs=yes - fi + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" - tmp_libs= - for deplib in $dependency_libs; do - case $deplib in - -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test - esac - # Need to link against all dependency_libs? - if test "$linkalldeplibs" = yes; then - deplibs="$deplib $deplibs" - else - # Need to hardcode shared library paths - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done # for deplib - continue - fi # $linkmode = prog... + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} - if test "$linkmode,$pass" = "prog,link"; then - if test -n "$library_names" && - { { test "$prefer_static_libs" = no || - test "$prefer_static_libs,$installed" = "built,yes"; } || - test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $absdir" ;; - esac - fi +test "$mode" = install && func_mode_install ${1+"$@"} - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi # $linkmode,$pass = prog,link... - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - fi +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi - link_static=no # Whether the deplib will be linked statically - use_static_libs=$prefer_static_libs - if test "$use_static_libs" = built && test "$installed" = yes ; then - use_static_libs=no - fi - if test -n "$library_names" && - { test "$use_static_libs" = no || test -z "$old_library"; }; then - if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_verbose "extracting global C symbols from \`$progfile'" + $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } fi - # This is a shared library - # Warn about portability, can't link against -module's on - # some systems (darwin) - if test "$shouldnotlink" = yes && test "$pass" = link ; then - $echo - if test "$linkmode" = prog; then - $echo "*** Warning: Linking the executable $output against the loadable module" - else - $echo "*** Warning: Linking the shared library $output against the loadable module" - fi - $echo "*** $linklib is not portable!" + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } fi - if test "$linkmode" = lib && - test "$hardcode_into_libs" = yes; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; esac - ;; - esac + } fi + fi - if test -n "$old_archive_from_expsyms_cmds"; then - # figure out the soname - set dummy $library_names - realname="$2" - shift; shift - libname=`eval \\$echo \"$libname_spec\"` - # use dlname if we got it. it's perfectly good, no? - if test -n "$dlname"; then - soname="$dlname" - elif test -n "$soname_spec"; then - # bleh windows - case $host in - *cygwin* | mingw*) - major=`expr $current - $age` - versuffix="-$major" - ;; - esac - eval soname=\"$soname_spec\" - else - soname="$realname" - fi + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + done - # Make a new name for the extract_expsyms_cmds to use - soroot="$soname" - soname=`$echo $soroot | ${SED} -e 's/^.*\///'` - newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi - # If the library has no export list, then create one now - if test -f "$output_objdir/$soname-def"; then : - else - $show "extracting exported symbol list from \`$soname'" - save_ifs="$IFS"; IFS='~' - cmds=$extract_expsyms_cmds - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi - # Create $newlib - if test -f "$output_objdir/$newlib"; then :; else - $show "generating import library for \`$soname'" - save_ifs="$IFS"; IFS='~' - cmds=$old_archive_from_expsyms_cmds - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - # make sure the library variables are pointing to the new library - dir=$output_objdir - linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi - if test "$linkmode" = prog || test "$mode" != relink; then - add_shlibpath= - add_dir= - add= - lib_linked=yes - case $hardcode_action in - immediate | unsupported) - if test "$hardcode_direct" = no; then - add="$dir/$linklib" - case $host in - *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; - *-*-sysv4*uw2*) add_dir="-L$dir" ;; - *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ - *-*-unixware7*) add_dir="-L$dir" ;; - *-*-darwin* ) - # if the lib is a module then we can not link against - # it, someone is ignoring the new warnings I added - if /usr/bin/file -L $add 2> /dev/null | - $EGREP ": [^:]* bundle" >/dev/null ; then - $echo "** Warning, lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then - $echo - $echo "** And there doesn't seem to be a static archive available" - $echo "** The link will probably fail, sorry" - else - add="$dir/$old_library" - fi - fi - esac - elif test "$hardcode_minus_L" = no; then - case $host in - *-*-sunos*) add_shlibpath="$dir" ;; - esac - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = no; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - relink) - if test "$hardcode_direct" = yes; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$dir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - *) lib_linked=no ;; - esac + echo >> "$output_objdir/$my_dlsyms" "\ - if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit $EXIT_FAILURE - fi +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +" + case $host in + *cygwin* | *mingw* | *cegcc* ) + echo >> "$output_objdir/$my_dlsyms" "\ +/* DATA imports from DLLs on WIN32 con't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs. */" + lt_dlsym_const= ;; + *osf5*) + echo >> "$output_objdir/$my_dlsyms" "\ +/* This system does not cope well with relocations in const data */" + lt_dlsym_const= ;; + *) + lt_dlsym_const=const ;; + esac - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; - *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; - esac - fi - if test "$linkmode" = prog; then - test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" - test -n "$add" && compile_deplibs="$add $compile_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && \ - test "$hardcode_minus_L" != yes && \ - test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - fi - fi - fi + echo >> "$output_objdir/$my_dlsyms" "\ +extern $lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +$lt_dlsym_const lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," - if test "$linkmode" = prog || test "$mode" = relink; then - add_shlibpath= - add_dir= - add= - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then - add="$libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - add="-l$name" - elif test "$hardcode_automatic" = yes; then - if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" - else - add="$libdir/$linklib" - fi - else - # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - fi + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + echo >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; - if test "$linkmode" = prog; then - test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" - test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - fi - fi - elif test "$linkmode" = prog; then - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_deplibs="$dir/$linklib $compile_deplibs" - finalize_deplibs="$dir/$linklib $finalize_deplibs" - else - compile_deplibs="-l$name -L$dir $compile_deplibs" - finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi - elif test "$build_libtool_libs" = yes; then - # Not a shared library - if test "$deplibs_check_method" != pass_all; then - # We're trying link a shared library against a static one - # but the system doesn't support it. +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. - $echo - $echo "*** Warning: This system can not link to static lib archive $lib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then - $echo "*** But as you try to build a module library, libtool will still create " - $echo "*** a static module, that should work as long as the dlopening application" - $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then - $echo - $echo "*** However, this would only work if libtool was able to extract symbol" - $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - $echo "*** not find such a program. So, this module is probably useless." - $echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) symtab_cflags="$symtab_cflags $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else - deplibs="$dir/$old_library $deplibs" - link_static=yes + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` fi - fi # link shared/static library? + ;; + *) + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + fi +} - if test "$linkmode" = lib; then - if test -n "$dependency_libs" && - { test "$hardcode_into_libs" != yes || - test "$build_old_libs" = yes || - test "$link_static" = yes; }; then - # Extract -R from dependency_libs - temp_deplibs= - for libdir in $dependency_libs; do - case $libdir in - -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - *) temp_deplibs="$temp_deplibs $libdir";; - esac - done - dependency_libs="$temp_deplibs" - fi +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + win32_nmres=`eval $NM -f posix -A $1 | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} - newlib_search_path="$newlib_search_path $absdir" - # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - if test "$link_all_deplibs" != no; then - # Add the search paths of all dependency libraries - for deplib in $dependency_libs; do - case $deplib in - -L*) path="$deplib" ;; - *.la) - dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$deplib" && dir="." - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - absdir="$dir" - fi - ;; - esac - if grep "^installed=no" $deplib > /dev/null; then - path="$absdir/$objdir" - else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - if test "$absdir" != "$libdir"; then - $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 - fi - path="$absdir" - fi - depdepl= - case $host in - *-*-darwin*) - # we do not want to link against static libs, - # but need to link against shared - eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names" ; then - for tmp in $deplibrary_names ; do - depdepl=$tmp - done - if test -f "$path/$depdepl" ; then - depdepl="$path/$depdepl" - fi - # do not add paths which are already there - case " $newlib_search_path " in - *" $path "*) ;; - *) newlib_search_path="$newlib_search_path $path";; - esac - fi - path="" - ;; - *) - path="-L$path" - ;; - esac - ;; - -l*) - case $host in - *-*-darwin*) - # Again, we only want to link against shared libraries - eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` - for tmp in $newlib_search_path ; do - if test -f "$tmp/lib$tmp_libs.dylib" ; then - eval depdepl="$tmp/lib$tmp_libs.dylib" - break - fi - done - path="" - ;; - *) continue ;; - esac - ;; - *) continue ;; - esac - case " $deplibs " in - *" $path "*) ;; - *) deplibs="$path $deplibs" ;; - esac - case " $deplibs " in - *" $depdepl "*) ;; - *) deplibs="$depdepl $deplibs" ;; - esac - done - fi # link_all_deplibs != no - fi # linkmode = lib - done # for deplib in $libs - dependency_libs="$newdependency_libs" - if test "$pass" = dlpreopen; then - # Link the dlpreopened libraries before other libraries - for deplib in $save_deplibs; do - deplibs="$deplib $deplibs" - done - fi - if test "$pass" != dlopen; then - if test "$pass" != conv; then - # Make sure lib_search_path contains only unique directories. - lib_search_path= - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir" ;; - esac - done - newlib_search_path= - fi - if test "$linkmode,$pass" != "prog,link"; then - vars="deplibs" - else - vars="compile_deplibs finalize_deplibs" - fi - for var in $vars dependency_libs; do - # Add libraries to $var in reverse order - eval tmp_libs=\"\$$var\" - new_libs= - for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - -R*) ;; - *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac - done - tmp_libs= - for deplib in $new_libs; do - case $deplib in - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" - done # for var - fi - # Last step: remove runtime libs from dependency_libs - # (they stay in deplibs) - tmp_libs= - for i in $dependency_libs ; do - case " $predeps $postdeps $compiler_lib_search_path " in - *" $i "*) - i="" - ;; - esac - if test -n "$i" ; then - tmp_libs="$tmp_libs $i" - fi +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + if test "$lock_old_archive_extraction" = yes; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 done - dependency_libs=$tmp_libs - done # for pass - if test "$linkmode" = prog; then - dlfiles="$newdlfiles" - dlprefiles="$newdlprefiles" fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test "$lock_old_archive_extraction" = yes; then + $opt_dry_run || rm -f "$lockfile" + fi + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} - case $linkmode in - oldlib) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 - fi - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 - fi +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 - fi + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" - objs="$objs$old_deplibs" - ;; + func_mkdir_p "$my_xdir" - lib) - # Make sure we only generate libraries of the form `libNAME.la'. - case $outputname in - lib*) - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run ;; *) - if test "$module" = no; then - $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - if test "$need_lib_prefix" != no; then - # Add the "lib" prefix for modules if required - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - else - libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - fi + func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + done - if test -n "$objs"; then - if test "$deplibs_check_method" != pass_all; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 - exit $EXIT_FAILURE - else - $echo - $echo "*** Warning: Linking the shared library $output against the non-libtool" - $echo "*** objects $objs is not portable!" - libobjs="$libobjs $objs" - fi - fi + func_extract_archives_result="$my_oldobjs" +} - if test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 - fi - set dummy $rpath - if test "$#" -gt 2; then - $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 - fi - install_libdir="$2" +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=${1-no} - oldlibs= - if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then - # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so - # convenience libraries should have the same extension an - # archive normally would. - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi + $ECHO "\ +#! $SHELL - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 - fi +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 - fi - else +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='$sed_quote_subst' - # Parse the version information argument. - save_ifs="$IFS"; IFS=':' - set dummy $vinfo 0 0 0 - IFS="$save_ifs" +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh - if test -n "$8"; then - $echo "$modename: too many parameters to \`-version-info'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - # convert absolute version numbers to libtool ages - # this retains compatibility with .la files and attempts - # to make the code below a bit more comprehensible +relink_command=\"$relink_command\" - case $vinfo_number in - yes) - number_major="$2" - number_minor="$3" - number_revision="$4" - # - # There are really only two kinds -- those that - # use the current revision as the major version - # and those that subtract age and use age as - # a minor version. But, then there is irix - # which has an extra 1 added just for fun - # - case $version_type in - darwin|linux|osf|windows|none) - current=`expr $number_major + $number_minor` - age="$number_minor" - revision="$number_revision" - ;; - freebsd-aout|freebsd-elf|sunos) - current="$number_major" - revision="$number_minor" - age="0" - ;; - irix|nonstopux) - current=`expr $number_major + $number_minor - 1` - age="$number_minor" - revision="$number_minor" - ;; - esac - ;; - no) - current="$2" - revision="$3" - age="$4" - ;; - esac +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + file=\"\$0\"" - # Check that each of the things are valid numbers. - case $current in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE - ;; - esac + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ - case $revision in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE - ;; - esac +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi - case $age in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE - ;; - esac +# Very basic option parsing. These options are (a) specific to +# the libtool wrapper, (b) are identical between the wrapper +# /script/ and the wrapper /executable/ which is used only on +# windows platforms, and (c) all begin with the string "--lt-" +# (application programs are unlikely to have options which match +# this pattern). +# +# There are only two supported options: --lt-debug and +# --lt-dump-script. There is, deliberately, no --lt-help. +# +# The first argument to this parsing function should be the +# script's $0 value, followed by "$@". +lt_option_debug= +func_parse_lt_options () +{ + lt_script_arg0=\$0 + shift + for lt_opt + do + case \"\$lt_opt\" in + --lt-debug) lt_option_debug=1 ;; + --lt-dump-script) + lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` + test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. + lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` + cat \"\$lt_dump_D/\$lt_dump_F\" + exit 0 + ;; + --lt-*) + \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 + exit 1 + ;; + esac + done - if test "$age" -gt "$current"; then - $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE - fi + # Print the debug banner immediately: + if test -n \"\$lt_option_debug\"; then + echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + fi +} - # Calculate the version variables. - major= - versuffix= - verstring= - case $version_type in - none) ;; +# Used when --lt-debug. Prints its arguments to stdout +# (redirection is the responsibility of the caller) +func_lt_dump_args () +{ + lt_dump_args_N=1; + for lt_arg + do + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` + done +} - darwin) - # Like Linux, but with the current version available in - # verstring for coding it into the library header - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - # Darwin ld doesn't like 0 for these options... - minor_current=`expr $current + 1` - verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" - ;; +# Core function for launching the target application +func_exec_program_core () +{ +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; + *) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 +} - freebsd-elf) - major=".$current" - versuffix=".$current"; - ;; +# A function to encapsulate launching the target application +# Strips options in the --lt-* namespace from \$@ and +# launches target application with the remaining arguments. +func_exec_program () +{ + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac + shift + done + func_exec_program_core \${1+\"\$@\"} +} - irix | nonstopux) - major=`expr $current - $age + 1` + # Parse options + func_parse_lt_options \"\$0\" \${1+\"\$@\"} - case $version_type in - nonstopux) verstring_prefix=nonstopux ;; - *) verstring_prefix=sgi ;; - esac - verstring="$verstring_prefix$major.$revision" + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. - # Add in all the interfaces that we are compatible with. - loop=$revision - while test "$loop" -ne 0; do - iface=`expr $revision - $loop` - loop=`expr $loop - 1` - verstring="$verstring_prefix$major.$iface:$verstring" - done + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` - # Before this point, $major must not contain `.'. - major=.$major - versuffix="$major.$revision" - ;; + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi - linux) - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - ;; + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + done - osf) - major=.`expr $current - $age` - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi - # Add in all the interfaces that we are compatible with. - loop=$age - while test "$loop" -ne 0; do - iface=`expr $current - $loop` - loop=`expr $loop - 1` - verstring="$verstring:${iface}.0" - done + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" - # Make executables depend on our current version. - verstring="$verstring:${current}.0" - ;; + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" - sunos) - major=".$current" - versuffix=".$current.$revision" - ;; + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then - windows) - # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 filesystems. - major=`expr $current - $age` - versuffix="-$major" - ;; + file=\"\$\$-\$program\" - *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE - ;; - esac + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - case $version_type in - darwin) - # we can't check for "0.0" in archive_cmds due to quoting - # problems, so we reset it completely - verstring= - ;; - *) - verstring="0.0" - ;; - esac - if test "$need_version" = no; then - versuffix= - else - versuffix=".0.0" - fi - fi + $ECHO "\ - # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then - major= - versuffix= - verstring="" - fi + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 - build_libtool_libs=no - build_old_libs=yes - fi + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" fi - fi - if test "$mode" != relink; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`$echo "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - if test "X$precious_files_regex" != "X"; then - if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then - continue - fi - fi - removelist="$removelist $p" - ;; - *) ;; - esac - done - if test -n "$removelist"; then - $show "${rm}r $removelist" - $run ${rm}r $removelist - fi - fi + $ECHO "\ - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" + if test -f \"\$progdir/\$program\"; then" - # Transform .lo files to .o files. - oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` - fi + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - # Eliminate all temporary directories. -# for path in $notinst_path; do -# lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` -# deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` -# dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` -# done + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then - dependency_libs="$temp_xrpath $dependency_libs" + export $shlibpath_var +" fi - fi - # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles="$dlfiles" - dlfiles= - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; - *) dlfiles="$dlfiles $lib" ;; - esac - done + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi - # Make sure dlprefiles contains only unique files - old_dlprefiles="$dlprefiles" - dlprefiles= - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; - *) dlprefiles="$dlprefiles $lib" ;; - esac - done + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + func_exec_program \${1+\"\$@\"} + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} - if test "$build_libtool_libs" = yes; then - if test -n "$rpath"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework - deplibs="$deplibs -framework System" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - ;; - *) - # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then - deplibs="$deplibs -lc" - fi - ;; - esac - fi - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release="" - versuffix="" - major="" - newdeplibs= - droppeddeps=no - case $deplibs_check_method in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behavior. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $rm conftest.c - cat > conftest.c </dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_path_result=`cygpath -w "$1" | + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # Unfortunately, winepath does not exit with a non-zero + # error code, so we are forced to check the contents of + # stdout. On the other hand, if the command is not + # found, the shell will set an exit code of 127 and print + # *an error message* to stdout. So we must check for both + # error code of zero AND non-empty stdout, which explains + # the odd construction: + func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` + if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then + func_to_host_path_result=`$ECHO "$func_to_host_path_tmp1" | + $SED -e "$lt_sed_naive_backslashify"` + else + # Allow warning below. + func_to_host_path_result= + fi + ;; + esac + if test -z "$func_to_host_path_result" ; then + func_error "Could not determine host path corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_path_result="$1" + fi + ;; + esac + fi +} +# end: func_to_host_path + +# func_to_host_pathlist arg +# +# Convert pathlists to host format when used with build tools. +# See func_to_host_path(), above. This function supports the +# following $build/$host combinations (but does no harm for +# combinations not listed here): +# $build $host +# mingw (msys) mingw [e.g. native] +# cygwin mingw +# *nix + wine mingw +# +# Path separators are also converted from $build format to +# $host format. If ARG begins or ends with a path separator +# character, it is preserved (but converted to $host format) +# on output. +# +# ARG is a pathlist (on $build) that should be converted to +# the proper representation on $host. The result is stored +# in $func_to_host_pathlist_result. +func_to_host_pathlist () +{ + func_to_host_pathlist_result="$1" + if test -n "$1"; then + case $host in + *mingw* ) + lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_pathlist_tmp1=$func_stripname_result + case $build in + *mingw* ) # Actually, msys. + # Awkward: cmd appends spaces to result. + func_to_host_pathlist_result=` + ( cmd //c echo "$func_to_host_pathlist_tmp1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` + ;; + *cygwin* ) + func_to_host_pathlist_result=`cygpath -w -p "$func_to_host_pathlist_tmp1" | + $SED -e "$lt_sed_naive_backslashify"` + ;; + * ) + # unfortunately, winepath doesn't convert pathlists + func_to_host_pathlist_result="" + func_to_host_pathlist_oldIFS=$IFS + IFS=: + for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do + IFS=$func_to_host_pathlist_oldIFS + if test -n "$func_to_host_pathlist_f" ; then + func_to_host_path "$func_to_host_pathlist_f" + if test -n "$func_to_host_path_result" ; then + if test -z "$func_to_host_pathlist_result" ; then + func_to_host_pathlist_result="$func_to_host_path_result" + else + func_append func_to_host_pathlist_result ";$func_to_host_path_result" + fi + fi + fi + done + IFS=$func_to_host_pathlist_oldIFS + ;; + esac + if test -z "$func_to_host_pathlist_result"; then + func_error "Could not determine the host path(s) corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This may break if $1 contains DOS-style drive + # specifications. The fix is not to complicate the expression + # below, but for the user to provide a working wine installation + # with winepath so that path translation in the cross-to-mingw + # case works properly. + lt_replace_pathsep_nix_to_dos="s|:|;|g" + func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ + $SED -e "$lt_replace_pathsep_nix_to_dos"` + fi + # Now, add the leading and trailing path separators back + case "$1" in + :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" + ;; + esac + case "$1" in + *: ) func_append func_to_host_pathlist_result ";" + ;; + esac + ;; + esac + fi +} +# end: func_to_host_pathlist + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +#else +# include +# include +# ifdef __CYGWIN__ +# include +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +/* declarations of non-ANSI functions */ +#if defined(__MINGW32__) +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined(__CYGWIN__) +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined (other platforms) ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined(_MSC_VER) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +# ifndef _INTPTR_T_DEFINED +# define _INTPTR_T_DEFINED +# define intptr_t int +# endif +#elif defined(__MINGW32__) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined(__CYGWIN__) +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined (other platforms) ... */ +#endif + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +/* path handling portability macros */ +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#if defined(LT_DEBUGWRAPPER) +static int lt_debug = 1; +#else +static int lt_debug = 0; +#endif + +const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_debugprintf (const char *file, int line, const char *fmt, ...); +void lt_fatal (const char *file, int line, const char *message, ...); +static const char *nonnull (const char *s); +static const char *nonempty (const char *s); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); +EOF + + cat </dev/null` - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null \ - | grep " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib="$potent_lib" - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | ${SED} 10q \ - | $EGREP "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - $echo - $echo "*** Warning: linker path does not have real file for library $a_deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $echo "*** with $libname but no candidates were found. (...for file magic test)" - else - $echo "*** with $libname and none of the candidates passed a file format test" - $echo "*** using a file magic. Last file checked: $potlib" - fi - fi else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" + cat <<"EOF" +const char * LIB_PATH_VALUE = ""; +EOF fi - done # Gone through all deplibs. - ;; - match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` - for a_deplib in $deplibs; do - name=`expr $a_deplib : '-l\(.*\)'` - # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - ;; - esac - fi - if test -n "$a_deplib" ; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test - if eval $echo \"$potent_lib\" 2>/dev/null \ - | ${SED} 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - $echo - $echo "*** Warning: linker path does not have real file for library $a_deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $echo "*** with $libname but no candidates were found. (...for regex pattern test)" - else - $echo "*** with $libname and none of the candidates passed a file format test" - $echo "*** using a regex pattern. Last file checked: $potlib" - fi - fi + + if test -n "$dllsearchpath"; then + func_to_host_pathlist "$dllsearchpath:" + cat </dev/null; then - $echo - if test "X$deplibs_check_method" = "Xnone"; then - $echo "*** Warning: inter-library dependencies are not supported in this platform." + + if test "$fast_install" = yes; then + cat < \"${export_symbols}T\"" - $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - $show "$mv \"${export_symbols}T\" \"$export_symbols\"" - $run eval '$mv "${export_symbols}T" "$export_symbols"' - fi - fi - fi + case $host_os in + mingw*) + cat <<"EOF" + { + char* p; + while ((p = strchr (newargz[0], '\\')) != NULL) + { + *p = '/'; + } + while ((p = strchr (lt_argv_zero, '\\')) != NULL) + { + *p = '/'; + } + } +EOF + ;; + esac - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' - fi + cat <<"EOF" + XFREE (target_name); + XFREE (actual_cwrapper_path); + XFREE (actual_cwrapper_name); + + lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */ + lt_setenv ("DUALCASE", "1"); /* for MSK sh */ + lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); + lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE); + + lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n", + nonnull (lt_argv_zero)); + for (i = 0; i < newargc; i++) + { + lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n", + i, nonnull (newargz[i])); + } - tmp_deplibs= - for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - tmp_deplibs="$tmp_deplibs $test_deplib" - ;; - esac - done - deplibs="$tmp_deplibs" +EOF - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" + case $host_os in + mingw*) + cat <<"EOF" + /* execv doesn't actually work on mingw as expected on unix */ + newargz = prepare_spawn (newargz); + rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); + if (rval == -1) + { + /* failed to start process */ + lt_debugprintf (__FILE__, __LINE__, + "(main) failed to launch target \"%s\": %s\n", + lt_argv_zero, nonnull (strerror (errno))); + return 127; + } + return rval; +EOF + ;; + *) + cat <<"EOF" + execv (lt_argv_zero, newargz); + return rval; /* =127, but avoids unused variable warning */ +EOF + ;; + esac - func_extract_archives $gentop $convenience - libobjs="$libobjs $func_extract_archives_result" - fi - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - linker_flags="$linker_flags $flag" - fi + cat <<"EOF" +} - # Make a backup of the uninstalled library when relinking - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? - fi +void * +xmalloc (size_t num) +{ + void *p = (void *) malloc (num); + if (!p) + lt_fatal (__FILE__, __LINE__, "memory exhausted"); - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - eval test_cmds=\"$module_expsym_cmds\" - cmds=$module_expsym_cmds - else - eval test_cmds=\"$module_cmds\" - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds - else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds - fi - fi + return p; +} - if test "X$skipped_export" != "X:" && - len=`expr "X$test_cmds" : ".*" 2>/dev/null` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # The command line is too long to link in one step, link piecewise. - $echo "creating reloadable object files..." +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), + string) : NULL; +} - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - output_la=`$echo "X$output" | $Xsed -e "$basename"` +const char * +base_name (const char *name) +{ + const char *base; - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - delfiles= - last_robj= - k=1 - output=$output_objdir/$output_la-${k}.$objext - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - eval test_cmds=\"$reload_cmds $objlist $last_robj\" - if test "X$objlist" = X || - { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && - test "$len" -le "$max_cmd_len"; }; then - objlist="$objlist $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else - # All subsequent reloadable object files will link in - # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" - fi - last_robj=$output_objdir/$output_la-${k}.$objext - k=`expr $k + 1` - output=$output_objdir/$output_la-${k}.$objext - objlist=$obj - len=1 - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha ((unsigned char) name[0]) && name[1] == ':') + name += 2; +#endif - if ${skipped_export-false}; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - libobjs=$output - # Append the command to create the export file. - eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" - fi - - # Set up a command to remove the reloadable object files - # after they are used. - i=0 - while test "$i" -lt "$k" - do - i=`expr $i + 1` - delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" - done + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return base; +} - $echo "creating a temporary reloadable object file: $output" +int +check_executable (const char *path) +{ + struct stat st; - # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; - libobjs=$output - # Restore the value of output. - output=$save_output + if ((stat (path, &st) >= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - cmds=$module_expsym_cmds - else - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds - fi - fi + lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; - # Append the command to remove the reloadable object files - # to the just-reset $cmds. - eval cmds=\"\$cmds~\$rm $delfiles\" - fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || { - lt_exit=$? + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' - fi +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; - exit $lt_exit - } - done - IFS="$save_ifs" + lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", + nonempty (wrapper)); - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; - if test -n "$convenience"; then - if test -z "$whole_archive_flag_spec"; then - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - fi - fi + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif - exit $EXIT_SUCCESS - fi + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? - fi - done + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" - fi - fi - ;; +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + lt_debugprintf (__FILE__, __LINE__, + "checking path component for symlinks: %s\n", + tmp_pathspec); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } - obj) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 - fi + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + lt_fatal (__FILE__, __LINE__, + "error accessing file \"%s\": %s", + tmp_pathspec, nonnull (strerror (errno))); + } + } + XFREE (tmp_pathspec); - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 - fi + if (!has_symlinks) + { + return xstrdup (pathspec); + } - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 - fi + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal (__FILE__, __LINE__, + "could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 - fi +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 - fi + assert (str != NULL); + assert (pat != NULL); - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 - fi + len = strlen (str); + patlen = strlen (pat); - case $output in - *.lo) - if test -n "$objs$old_deplibs"; then - $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit $EXIT_FAILURE - fi - libobj="$output" - obj=`$echo "X$output" | $Xsed -e "$lo2o"` - ;; - *) - libobj= - obj="$output" - ;; - esac + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} - # Delete the old objects. - $run $rm $obj $libobj +void +lt_debugprintf (const char *file, int line, const char *fmt, ...) +{ + va_list args; + if (lt_debug) + { + (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); + } +} - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec and hope we can get by with - # turning comma into space.. - wl= +static void +lt_error_core (int exit_status, const char *file, + int line, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` - else - gentop="$output_objdir/${obj}x" - generated="$generated $gentop" + if (exit_status >= 0) + exit (exit_status); +} - func_extract_archives $gentop $convenience - reload_conv_objs="$reload_objs $func_extract_archives_result" - fi - fi +void +lt_fatal (const char *file, int line, const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + va_end (ap); +} - # Create the old-style object. - reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test +static const char * +nonnull (const char *s) +{ + return s ? s : "(null)"; +} - output="$obj" - cmds=$reload_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" +static const char * +nonempty (const char *s) +{ + return (s && !*s) ? "(empty)" : nonnull (s); +} - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi +void +lt_setenv (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_setenv) setting '%s' to '%s'\n", + nonnull (name), nonnull (value)); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} - exit $EXIT_SUCCESS - fi +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} - if test "$build_libtool_libs" != yes; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi +void +lt_update_exe_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $run eval "echo timestamp > $libobj" || exit $? - exit $EXIT_SUCCESS - fi + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} - if test -n "$pic_flag" || test "$pic_mode" != default; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output="$libobj" - cmds=$reload_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi +void +lt_update_lib_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} - exit $EXIT_SUCCESS - ;; +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; - prog) - case $host in - *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; - esac - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 - fi - - if test "$preload" = yes; then - if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && - test "$dlopen_self_static" = unknown; then - $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi - fi - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - ;; - esac - - case $host in - *darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - if test "$tagname" = CXX ; then - compile_command="$compile_command ${wl}-bind_at_load" - finalize_command="$finalize_command ${wl}-bind_at_load" - fi - ;; - esac + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $compile_deplibs " in - *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $compile_deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$new_libs $deplib" ;; - esac - ;; - *) new_libs="$new_libs $deplib" ;; - esac - done - compile_deplibs="$new_libs" + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; - compile_command="$compile_command $compile_deplibs" - finalize_command="$finalize_command $finalize_deplibs" + quoted_string = XMALLOC (char, length + 1); - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - fi + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$libdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$libdir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - *) dllsearchpath="$dllsearchpath:$testbindir";; - esac - ;; - esac - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath="$rpath" + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + return new_argv; +} +EOF ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath="$rpath" - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - fi - - dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - dlsyms="${outputname}S.c" - else - $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 - fi - fi - - if test -n "$dlsyms"; then - case $dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${outputname}.nm" - - $show "$rm $nlist ${nlist}S ${nlist}T" - $run $rm "$nlist" "${nlist}S" "${nlist}T" - - # Parse the name list into a source file. - $show "creating $output_objdir/$dlsyms" - - test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ -/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ -/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* Prevent the only kind of declaration conflicts we can make. */ -#define lt_preloaded_symbols some_other_symbol - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - $show "generating symbol list for \`$output'" - - test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for arg in $progfiles; do - $show "extracting global C symbols from \`$arg'" - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - if test -n "$export_symbols_regex"; then - $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" - $run $rm $export_symbols - $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - case $host in - *cygwin* | *mingw* ) - $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' - ;; - esac - else - $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - $run eval 'mv "$nlist"T "$nlist"' - case $host in - *cygwin* | *mingw* ) - $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' - ;; - esac - fi - fi - - for arg in $dlprefiles; do - $show "extracting global C symbols from \`$arg'" - name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` - $run eval '$echo ": $name " >> "$nlist"' - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -z "$run"; then - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $mv "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | - if sort -k 3 /dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - grep -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' - else - $echo '/* NONE */' >> "$output_objdir/$dlsyms" - fi - - $echo >> "$output_objdir/$dlsyms" "\ - -#undef lt_preloaded_symbols - -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -" - - case $host in - *cygwin* | *mingw* ) - $echo >> "$output_objdir/$dlsyms" "\ -/* DATA imports from DLLs on WIN32 can't be const, because - runtime relocations are performed -- see ld's documentation - on pseudo-relocs */ -struct { -" - ;; - * ) - $echo >> "$output_objdir/$dlsyms" "\ -const struct { -" - ;; esac + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -e 's/\([\\"]\)/\\\1/g' \ + -e 's/^/ fputs ("/' -e 's/$/\\n", f);/' - $echo >> "$output_objdir/$dlsyms" "\ - const char *name; - lt_ptr address; + cat <<"EOF" } -lt_preloaded_symbols[] = -{\ -" - - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" - - $echo >> "$output_objdir/$dlsyms" "\ - {0, (lt_ptr) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_preloaded_symbols; +EOF } -#endif +# end: func_emit_cwrapperexe_src -#ifdef __cplusplus +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $opt_debug + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac } -#endif\ -" - fi - pic_flag_for_symtable= - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; - esac;; - *-*-hpux*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag";; - esac - esac - - # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? - - # Clean up the generated files. - $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" - $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" - - # Transform the symbol file into the correct name. - case $host in - *cygwin* | *mingw* ) - if test -f "$output_objdir/${outputname}.def" ; then - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` - else - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` - fi - ;; - * ) - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` - ;; - esac - ;; - *) - $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit $EXIT_FAILURE - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` - fi - - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP` - link_command="$compile_command$compile_rpath" +# func_mode_link arg... +func_mode_link () +{ + $opt_debug + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no - # We have no uninstalled library dependencies, so finalize right now. - $show "$link_command" - $run eval "$link_command" - exit_status=$? + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt - # Delete the generated files. - if test -n "$dlsyms"; then - $show "$rm $output_objdir/${outputname}S.${objext}" - $run $rm "$output_objdir/${outputname}S.${objext}" - fi + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= - exit $exit_status - fi + avoid_version=no + bindir= + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile - if test -n "$shlibpath_var"; then - # We should set the shlibpath_var - rpath= - for dir in $temp_rpath; do - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) - # Absolute path. - rpath="$rpath$dir:" + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + bindir) + bindir="$arg" + prev= + continue + ;; + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue ;; *) - # Relative path: add a thisdir entry. - rpath="$rpath\$thisdir/$dir:" + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + continue ;; esac - done - temp_rpath="$rpath" - fi - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test "$no_install" = yes; then - # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $run $rm $output - # Link the executable and exit - $show "$link_command" - $run eval "$link_command" || exit $? - exit $EXIT_SUCCESS - fi + ;; + expsyms) + export_symbols="$arg" + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) deplibs="$deplibs $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# moreargs="$moreargs $fil" + arg=$fil + # A libtool-controlled object. - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= - $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 - $echo "$modename: \`$output' will be relinked during installation" 1>&2 - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi + # Read the .lo file + func_source "$arg" - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi - # Delete the old output files. - $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" - $show "$link_command" - $run eval "$link_command" || exit $? + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" - # Now create the wrapper script. - $show "creating $output" + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi - # Quote the relink command for shipping. - if test -n "$relink_command"; then - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" - fi - done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` - fi - - # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then - case $progpath in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; - *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; - esac - qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` - fi - - # Only actually do things if our run command is non-null. - if test -z "$run"; then - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; - esac - # test for cygwin because mv fails w/o .exe extensions - case $host in - *cygwin*) - exeext=.exe - outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; - *) exeext= ;; - esac - case $host in - *cygwin* | *mingw* ) - output_name=`basename $output` - output_path=`dirname $output` - cwrappersource="$output_path/$objdir/lt-$output_name.c" - cwrapper="$output_path/$output_name.exe" - $rm $cwrappersource $cwrapper - trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - cat > $cwrappersource <> $cwrappersource<<"EOF" -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(PATH_MAX) -# define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi -#ifndef DIR_SEPARATOR -# define DIR_SEPARATOR '/' -# define PATH_SEPARATOR ':' -#endif + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) -# define HAVE_DOS_BASED_FILE_SYSTEM -# ifndef DIR_SEPARATOR_2 -# define DIR_SEPARATOR_2 '\\' -# endif -# ifndef PATH_SEPARATOR_2 -# define PATH_SEPARATOR_2 ';' -# endif -#endif + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" -#ifndef PATH_SEPARATOR_2 -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -#else /* PATH_SEPARATOR_2 */ -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -#endif /* PATH_SEPARATOR_2 */ + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + weak_libs="$weak_libs $arg" + prev= + continue + ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ -} while (0) + prevarg="$arg" -/* -DDEBUG is fairly common in CFLAGS. */ -#undef DEBUG -#if defined DEBUGWRAPPER -# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) -#else -# define DEBUG(format, ...) -#endif + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; -const char *program_name = NULL; + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; -void * xmalloc (size_t num); -char * xstrdup (const char *string); -const char * base_name (const char *name); -char * find_executable(const char *wrapper); -int check_executable(const char *path); -char * strendzap(char *str, const char *pat); -void lt_fatal (const char *message, ...); + -avoid-version) + avoid_version=yes + continue + ;; -int -main (int argc, char *argv[]) -{ - char **newargz; - int i; + -bindir) + prev=bindir + continue + ;; - program_name = (char *) xstrdup (base_name (argv[0])); - DEBUG("(main) argv[0] : %s\n",argv[0]); - DEBUG("(main) program_name : %s\n",program_name); - newargz = XMALLOC(char *, argc+2); -EOF + -dlopen) + prev=dlfiles + continue + ;; - cat >> $cwrappersource <> $cwrappersource <<"EOF" - newargz[1] = find_executable(argv[0]); - if (newargz[1] == NULL) - lt_fatal("Couldn't find %s", argv[0]); - DEBUG("(main) found exe at : %s\n",newargz[1]); - /* we know the script has the same name, without the .exe */ - /* so make sure newargz[1] doesn't end in .exe */ - strendzap(newargz[1],".exe"); - for (i = 1; i < argc; i++) - newargz[i+1] = xstrdup(argv[i]); - newargz[argc+1] = NULL; + -export-dynamic) + export_dynamic=yes + continue + ;; - for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" - return 127; -} + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; -void * -xmalloc (size_t num) -{ - void * p = (void *) malloc (num); - if (!p) - lt_fatal ("Memory exhausted"); + -L*) + func_stripname '-L' '' "$arg" + dir=$func_stripname_result + if test -z "$dir"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + continue + ;; - return p; -} + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + deplibs="$deplibs $arg" + continue + ;; -char * -xstrdup (const char *string) -{ - return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL -; -} + -module) + module=yes + continue + ;; -const char * -base_name (const char *name) -{ - const char *base; + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot) + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - /* Skip over the disk name in MSDOS pathnames. */ - if (isalpha ((unsigned char)name[0]) && name[1] == ':') - name += 2; -#endif + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + compiler_flags="$compiler_flags $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; + esac + continue + ;; - for (base = name; *name; name++) - if (IS_DIR_SEPARATOR (*name)) - base = name + 1; - return base; -} + -multi_module) + single_module="${wl}-multi_module" + continue + ;; -int -check_executable(const char * path) -{ - struct stat st; + -no-fast-install) + fast_install=no + continue + ;; - DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); - if ((!path) || (!*path)) - return 0; + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; - if ((stat (path, &st) >= 0) && - ( - /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ -#if defined (S_IXOTH) - ((st.st_mode & S_IXOTH) == S_IXOTH) || -#endif -#if defined (S_IXGRP) - ((st.st_mode & S_IXGRP) == S_IXGRP) || -#endif - ((st.st_mode & S_IXUSR) == S_IXUSR)) - ) - return 1; - else - return 0; -} + -no-undefined) + allow_undefined=no + continue + ;; -/* Searches for the full path of the wrapper. Returns - newly allocated full path name if found, NULL otherwise */ -char * -find_executable (const char* wrapper) -{ - int has_slash = 0; - const char* p; - const char* p_next; - /* static buffer for getcwd */ - char tmp[LT_PATHMAX + 1]; - int tmp_len; - char* concat_name; + -objectlist) + prev=objectlist + continue + ;; - DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); + -o) prev=output ;; - if ((wrapper == NULL) || (*wrapper == '\0')) - return NULL; + -precious-files-regex) + prev=precious_regex + continue + ;; - /* Absolute path? */ -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') - { - concat_name = xstrdup (wrapper); - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - } - else - { -#endif - if (IS_DIR_SEPARATOR (wrapper[0])) - { - concat_name = xstrdup (wrapper); - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - } -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - } -#endif + -release) + prev=release + continue + ;; - for (p = wrapper; *p; p++) - if (*p == '/') - { - has_slash = 1; - break; - } - if (!has_slash) - { - /* no slashes; search PATH */ - const char* path = getenv ("PATH"); - if (path != NULL) - { - for (p = path; *p; p = p_next) - { - const char* q; - size_t p_len; - for (q = p; *q; q++) - if (IS_PATH_SEPARATOR(*q)) - break; - p_len = q - p; - p_next = (*q == '\0' ? q : q + 1); - if (p_len == 0) - { - /* empty path: current directory */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen(tmp); - concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - } - else - { - concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); - memcpy (concat_name, p, p_len); - concat_name[p_len] = '/'; - strcpy (concat_name + p_len + 1, wrapper); - } - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - } - } - /* not found in PATH; assume curdir */ - } - /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen(tmp); - concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); + -rpath) + prev=rpath + continue + ;; - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - return NULL; -} + -R) + prev=xrpath + continue + ;; -char * -strendzap(char *str, const char *pat) -{ - size_t len, patlen; + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; - assert(str != NULL); - assert(pat != NULL); + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; - len = strlen(str); - patlen = strlen(pat); + -shrext) + prev=shrext + continue + ;; - if (patlen <= len) - { - str += len - patlen; - if (strcmp(str, pat) == 0) - *str = '\0'; - } - return str; -} + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; -static void -lt_error_core (int exit_status, const char * mode, - const char * message, va_list ap) -{ - fprintf (stderr, "%s: %s: ", program_name, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); + -thread-safe) + thread_safe=yes + continue + ;; - if (exit_status >= 0) - exit (exit_status); -} + -version-info) + prev=vinfo + continue + ;; -void -lt_fatal (const char *message, ...) -{ - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, "FATAL", message, ap); - va_end (ap); -} -EOF - # we should really use a build-platform specific compiler - # here, but OTOH, the wrappers (shell script and this C one) - # are only useful if you want to execute the "real" binary. - # Since the "real" binary is built for $host, then this - # wrapper might as well be built for $host, too. - $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource - ;; - esac - $rm $output - trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; - $echo > $output "\ -#! $SHELL + -weak) + prev=weak + continue + ;; -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + arg="$arg $func_quote_for_eval_result" + compiler_flags="$compiler_flags $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='${SED} -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + arg="$arg $wl$func_quote_for_eval_result" + compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" + linker_flags="$linker_flags $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; -# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). -if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac -fi + -Xcompiler) + prev=xcompiler + continue + ;; -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + -Xlinker) + prev=xlinker + continue + ;; -relink_command=\"$relink_command\" + -XCClinker) + prev=xcclinker + continue + ;; -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variable: - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$echo are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - echo=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$echo works! - : - else - # Restart under the correct shell, and then maybe \$echo will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $echo >> $output "\ + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # Flags to be passed through unchanged, with rationale: + # -64, -mips[0-9] enable 64-bit mode for the SGI compiler + # -r[0-9][0-9]* specify processor for the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler + # +DA*, +DD* enable 64-bit mode for the HP compiler + # -q* compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* architecture-specific flags for GCC + # -F/path path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + compiler_flags="$compiler_flags $arg" + continue + ;; - # Find the directory that this script lives in. - thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + *.$objext) + # A standard object. + objs="$objs $arg" + ;; - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi + *.lo) + # A libtool-controlled object. - file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` - done + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" + # Read the .lo file + func_source "$arg" - if test "$fast_install" = yes; then - $echo >> $output "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi - if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" - file=\"\$\$-\$program\" + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" - if test ! -d \"\$progdir\"; then - $mkdir \"\$progdir\" - else - $rm \"\$progdir/\$file\" - fi" + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi - $echo >> $output "\ + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $echo \"\$relink_command_output\" >&2 - $rm \"\$progdir/\$file\" - exit $EXIT_FAILURE - fi - fi + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi - $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $rm \"\$progdir/\$program\"; - $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $rm \"\$progdir/\$file\" - fi" + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi else - $echo >> $output "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi fi + ;; - $echo >> $output "\ + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue + ;; - if test -f \"\$progdir/\$program\"; then" + *.la) + # A libtool-controlled library. - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $echo >> $output "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + esac # arg - export $shlibpath_var -" - fi + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $echo >> $output "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname="$func_basename_result" + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_duplicate_deps ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + libs="$libs $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + case $lib in + *.la) func_source "$lib" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + func_basename "$deplib" + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; + *) deplibs="$deplibs $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + compiler_flags="$compiler_flags $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + dir=$func_stripname_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." + else + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + + if test "$found" = yes || test -f "$lib"; then : + else + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir="$ladir" + fi + ;; + esac + func_basename "$lib" + laname="$func_basename_result" + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + newlib_search_path="$newlib_search_path $func_stripname_result" + ;; + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) temp_rpath="$temp_rpath$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + notinst_deplibs="$notinst_deplibs $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + echo + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + $ECHO "*** Warning: This system can not link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + if $opt_duplicate_deps ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + path= + case $deplib in + -L*) path="$deplib" ;; + *.la) + func_dirname "$deplib" "" "." + dir="$func_dirname_result" + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of \`$dir'" + absdir="$dir" + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) + path="-L$absdir/$objdir" + ;; + esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + objs="$objs$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi + + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + shift + IFS="$save_ifs" + + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|qnx|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current" + ;; + + irix | nonstopux) + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + + *) + func_fatal_configuration "unknown library version type \`$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + func_warning "undefined symbols not allowed in $host shared libraries" + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + fi + + func_generate_dlsyms "$libname" "$libname" "yes" + libobjs="$libobjs $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + removelist="$removelist $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c </dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + done + fi + case $tmp_deplibs in + *[!\ \ ]*) + echo + if test "X$deplibs_check_method" = "Xnone"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + ;; + esac + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." - $echo >> $output "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2*) - $echo >> $output "\ - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" + if test "$allow_undefined" = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` ;; + esac + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; *) - $echo >> $output "\ - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" + case " $deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac ;; esac - $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \$*\" - exit $EXIT_FAILURE - fi - else - # The program doesn't exist. - \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 - \$echo \"This script is just a wrapper for \$program.\" 1>&2 - $echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit $EXIT_FAILURE - fi -fi\ -" - chmod +x $output - fi - exit $EXIT_SUCCESS - ;; - esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + deplibs="$new_libs" - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" - build_libtool_libs=no - else - oldobjs="$old_deplibs $non_pic_objects" + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi - addlibs="$old_convenience" - fi - if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi - func_extract_archives $gentop $addlibs - oldobjs="$oldobjs $func_extract_archives_result" - fi + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - cmds=$old_archive_from_new_cmds - else - # POSIX demands no paths to be encoded in archives. We have - # to avoid creating archives with duplicate basenames if we - # might have to extract them afterwards, e.g., when creating a - # static archive out of a convenience library, or when linking - # the entirety of a libtool archive into another (currently - # not supported by libtool). - if (for obj in $oldobjs - do - $echo "X$obj" | $Xsed -e 's%^.*/%%' - done | sort | sort -uc >/dev/null 2>&1); then - : + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" else - $echo "copying selected object files to avoid basename conflicts..." + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi - if test -z "$gentop"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" + lib="$output_objdir/$realname" + linknames= + for link + do + linknames="$linknames $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "$gentop"; then - exit $exit_status + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + delfiles="$delfiles $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes fi fi + ;; + esac - save_oldobjs=$oldobjs - oldobjs= - counter=1 - for obj in $save_oldobjs - do - objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - case " $oldobjs " in - " ") oldobjs=$obj ;; - *[\ /]"$objbase "*) - while :; do - # Make sure we don't pick an alternate name that also - # overlaps. - newobj=lt$counter-$objbase - counter=`expr $counter + 1` - case " $oldobjs " in - *[\ /]"$newobj "*) ;; - *) if test ! -f "$gentop/$newobj"; then break; fi ;; - esac - done - $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - $run ln "$obj" "$gentop/$newobj" || - $run cp "$obj" "$gentop/$newobj" - oldobjs="$oldobjs $gentop/$newobj" - ;; - *) oldobjs="$oldobjs $obj" ;; - esac - done + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + func_len " $cmd" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi fi - eval cmds=\"$old_archive_cmds\" - - if len=`expr "X$cmds" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - cmds=$old_archive_cmds - else - # the command line is too long to link in one step, link in parts - $echo "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi - # Is there a better way of finding the last object in the list? - for obj in $save_oldobjs - do - last_oldobj=$obj - done - for obj in $save_oldobjs - do - oldobjs="$objlist $obj" - objlist="$objlist $obj" - eval test_cmds=\"$old_archive_cmds\" - if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && - test "$len" -le "$max_cmd_len"; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - if test "$obj" = "$last_oldobj" ; then - RANLIB=$save_RANLIB - fi - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" - objlist= - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - if test "X$oldobjs" = "X" ; then - eval cmds=\"\$concat_cmds\" + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= else - eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= fi fi - fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - eval cmd=\"$cmd\" - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - if test -n "$generated"; then - $show "${rm}r$generated" - $run ${rm}r$generated - fi + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" + fi - # Now create the libtool archive. - case $output in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" - $show "creating $output" + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi fi - done - # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` - if test "$hardcode_automatic" = yes ; then - relink_command= - fi + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. - # Only create the output if not a dry run. - if test -z "$run"; then - for installed in no yes; do - if test "$installed" = yes; then - if test -z "$install_libdir"; then - break + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + func_basename "$output" + output_la=$func_basename_result + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + $ECHO "$obj" >> $output + done + echo ')' >> $output + delfiles="$delfiles $output" + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift fi - output="$output_objdir/$outputname"i - # Replace all uninstalled libtool libraries with the installed ones - newdependency_libs= - for deplib in $dependency_libs; do - case $deplib in - *.la) - name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - newdependency_libs="$newdependency_libs $libdir/$name" - ;; - *) newdependency_libs="$newdependency_libs $deplib" ;; - esac + for obj + do + $ECHO "$obj" >> $output done - dependency_libs="$newdependency_libs" - newdlfiles= - for lib in $dlfiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + delfiles="$delfiles $output" + output=$firstobj\"$file_list_spec$output\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" + else + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=" $obj" + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi - newdlfiles="$newdlfiles $libdir/$name" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE + delfiles="$delfiles $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi - newdlprefiles="$newdlprefiles $libdir/$name" - done - dlprefiles="$newdlprefiles" - else - newdlfiles= - for lib in $dlfiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlfiles="$newdlfiles $abs" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlprefiles="$newdlprefiles $abs" + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } done - dlprefiles="$newdlprefiles" + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi fi - $rm $output - # place dlname in correct position for cygwin - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; - esac - $echo > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# Please DO NOT delete this file! -# It is necessary for linking the library. -# The name that we can dlopen(3). -dlname='$tdlname' + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi -# Names of this library. -library_names='$library_names' + libobjs=$output + # Restore the value of output. + output=$save_output -# The name of the static archive. -old_library='$old_library' + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi -# Version information for $libname. -current=$current -age=$age -revision=$revision + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi -# Is this an already installed library? -installed=$installed + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" -# Should we warn about portability when linking against -modules? -shouldnotlink=$module + func_extract_archives $gentop $dlprefiles + libobjs="$libobjs $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi -# Files to dlopen/dlpreopen -dlopen='$dlfiles' -dlpreopen='$dlprefiles' + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? -# Directory that this library needs to be installed in: -libdir='$install_libdir'" - if test "$installed" = no && test "$need_relink" = yes; then - $echo >> $output "\ -relink_command=\"$relink_command\"" - fi + # Restore the uninstalled library and exit + if test "$mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } done - fi + IFS="$save_ifs" - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? - ;; - esac - exit $EXIT_SUCCESS - ;; + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? - # libtool install mode - install) - modename="$modename: install" + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - $echo "X$nonopt" | grep shtool > /dev/null; then - # Aesthetically quote it. - arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - install_prog="$arg " - arg="$1" - shift - else - install_prog= - arg=$nonopt - fi + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi ;; - esac - install_prog="$install_prog$arg" - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest=$arg - continue + obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" fi - case $arg in - -d) isdir=yes ;; - -f) - case " $install_prog " in - *[\\\ /]cp\ *) ;; - *) prev=$arg ;; - esac - ;; - -g | -m | -o) prev=$arg ;; - -s) - stripme=" -s" - continue - ;; - -*) + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result ;; *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest=$arg - continue - fi + libobj= + obj="$output" ;; esac - # Aesthetically quote the argument. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog $arg" - done + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj - if test -z "$install_prog"; then - $echo "$modename: you must specify an install program" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. + wl= - if test -n "$prev"; then - $echo "$modename: the \`$prev' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + else + gentop="$output_objdir/${obj}x" + generated="$generated $gentop" - if test -z "$files"; then - if test -z "$dest"; then - $echo "$modename: no file or destination specified" 1>&2 - else - $echo "$modename: you must specify a destination" 1>&2 + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi fi - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - # Strip any trailing slash from the destination. - dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` - test "X$destdir" = "X$dest" && destdir=. - destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + output="$obj" + func_execute_cmds "$reload_cmds" 'exit $?' - # Not a directory, so check to see that there is only one file specified. - set dummy $files - if test "$#" -gt 2; then - $echo "$modename: \`$dest' is not a directory" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS fi - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - esac - done + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS ;; - esac - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - staticlibs="$staticlibs $file" + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ;; + esac - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + ;; + esac fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac - library_names= - old_library= - relink_command= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; esac - fi + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + compile_deplibs="$new_libs" - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ - test "X$dir" = "X$file/" && dir= - dir="$dir$objdir" - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. - if test "$inst_prefix_dir" = "$destdir"; then - $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 - exit $EXIT_FAILURE - fi + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP` + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi else - relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP` + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" - $echo "$modename: warning: relinking \`$file'" 1>&2 - $show "$relink_command" - if $run eval "$relink_command"; then : + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - exit $EXIT_FAILURE + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" - # See the names of the shared library. - set dummy $library_names - if test -n "$2"; then - realname="$2" - shift - shift + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + fi - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" - # Install the shared library and build the symlinks. - $show "$install_prog $dir/$srcname $destdir/$realname" - $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? - if test -n "$stripme" && test -n "$striplib"; then - $show "$striplib $destdir/$realname" - $run eval "$striplib $destdir/$realname" || exit $? - fi + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. - for linkname - do - if test "$linkname" != "$realname"; then - $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" - $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" - fi - done - fi + wrappers_required=yes + case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=no + ;; + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then + # Replace the output file specification. + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" - # Do each command in the postinstall commands. - lib="$destdir/$realname" - cmds=$postinstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' - fi + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' - exit $lt_exit - } - done - IFS="$save_ifs" + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi - # Install the pseudo-library for information purposes. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - instname="$dir/$name"i - $show "$install_prog $instname $destdir/$name" - $run eval "$install_prog $instname $destdir/$name" || exit $? - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; + exit $exit_status + fi - *.lo) - # Install (i.e. copy) a libtool object. + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - esac - - # Install the libtool object if requested. - if test -n "$destfile"; then - $show "$install_prog $file $destfile" - $run eval "$install_prog $file $destfile" || exit $? + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi + fi - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` - - $show "$install_prog $staticobj $staticdest" - $run eval "$install_prog \$staticobj \$staticdest" || exit $? - fi + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' exit $EXIT_SUCCESS - ;; + fi - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" fi + fi - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext="" - case $file in - *.exe) - if test ! -f "$file"; then - file=`$echo $file|${SED} 's,.exe$,,'` - stripped_ext=".exe" - fi - ;; - esac - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin*|*mingw*) - wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` - ;; - *) - wrapper=$file - ;; - esac - if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then - notinst_deplibs= - relink_command= - - # Note that it is not necessary on cygwin/mingw to append a dot to - # foo even if both foo and FILE.exe exist: automatic-append-.exe - # behavior happens only for exec(3), not for open(2)! Also, sourcing - # `FILE.' does not work on cygwin managed mounts. - # - # If there is no directory component, then add one. - case $wrapper in - */* | *\\*) . ${wrapper} ;; - *) . ./${wrapper} ;; - esac - - # Check the variables that should have been set. - if test -z "$notinst_deplibs"; then - $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 - exit $EXIT_FAILURE - fi + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - # If there is no directory component, then add one. - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - fi - libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 - finalize=no - fi - done + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - relink_command= - # Note that it is not necessary on cygwin/mingw to append a dot to - # foo even if both foo and FILE.exe exist: automatic-append-.exe - # behavior happens only for exec(3), not for open(2)! Also, sourcing - # `FILE.' does not work on cygwin managed mounts. - # - # If there is no directory component, then add one. - case $wrapper in - */* | *\\*) . ${wrapper} ;; - *) . ./${wrapper} ;; - esac + func_show_eval "$link_command" 'exit $?' - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - if test "$finalize" = yes && test -z "$run"; then - tmpdir=`func_mktempdir` - file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP` + # Now create the wrapper script. + func_verbose "creating $output" - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - ${rm}r "$tmpdir" - continue - fi - file="$outputname" - else - $echo "$modename: warning: cannot relink \`$file'" 1>&2 - fi + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" else - # Install the binary that we compiled earlier. - file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyway - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` - ;; - esac - ;; + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; esac - $show "$install_prog$stripme $file $destfile" - $run eval "$install_prog\$stripme \$file \$destfile" || exit $? - test -n "$outputname" && ${rm}r "$tmpdir" - ;; - esac - done + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } - for file in $staticlibs; do - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - # Set up the ranlib parameters. - oldlib="$destdir/$name" + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac - $show "$install_prog $file $oldlib" - $run eval "$install_prog \$file \$oldlib" || exit $? + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do - if test -n "$stripme" && test -n "$old_striplib"; then - $show "$old_striplib $oldlib" - $run eval "$old_striplib $oldlib" || exit $? + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save $symfileobj" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + oldobjs="$oldobjs $symfileobj" + fi + fi + addlibs="$old_convenience" fi - # Do each command in the postinstall commands. - cmds=$old_postinstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" - if test -n "$future_libdirs"; then - $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 - fi + func_extract_archives $gentop $addlibs + oldobjs="$oldobjs $func_extract_archives_result" + fi - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - test -n "$run" && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' - else - exit $EXIT_SUCCESS - fi - ;; + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else - # libtool finish mode - finish) - modename="$modename: finish" - libdirs="$nonopt" - admincmds= + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done + func_extract_archives $gentop $dlprefiles + oldobjs="$oldobjs $func_extract_archives_result" + fi - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - cmds=$finish_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || admincmds="$admincmds - $cmd" + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + echo "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" + ;; + *) oldobjs="$oldobjs $obj" ;; + esac done - IFS="$save_ifs" - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $run eval "$cmds" || admincmds="$admincmds - $cmds" fi - done - fi - - # Exit here if they wanted silent mode. - test "$show" = : && exit $EXIT_SUCCESS + eval cmds=\"$old_archive_cmds\" - $echo "X----------------------------------------------------------------------" | $Xsed - $echo "Libraries have been installed in:" - for libdir in $libdirs; do - $echo " $libdir" + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' done - $echo - $echo "If you ever happen to want to link against installed libraries" - $echo "in a given directory, LIBDIR, you must either use libtool, and" - $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - $echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - $echo " during execution" - fi - if test -n "$runpath_var"; then - $echo " - add LIBDIR to the \`$runpath_var' environment variable" - $echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $echo " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $echo " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - $echo - $echo "See any operating system documentation about shared libraries for" - $echo "more information, such as the ld(1) and ld.so(8) manual pages." - $echo "X----------------------------------------------------------------------" | $Xsed - exit $EXIT_SUCCESS - ;; - - # libtool execute mode - execute) - modename="$modename: execute" - # The first argument is the command name. - cmd="$nonopt" - if test -z "$cmd"; then - $echo "$modename: you must specify a COMMAND" 1>&2 - $echo "$help" - exit $EXIT_FAILURE - fi + test -n "$generated" && \ + func_show_eval "${RM}r$generated" - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - if test ! -f "$file"; then - $echo "$modename: \`$file' is not a file" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + func_verbose "creating $output" - dir= - case $file in - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi - # Read the libtool library. - dlname= - library_names= + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlfiles="$newdlfiles $libdir/$name" + ;; + *) newdlfiles="$newdlfiles $lib" ;; + esac + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + newdlprefiles="$newdlprefiles $libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlfiles="$newdlfiles $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlprefiles="$newdlprefiles $abs" + done + dlprefiles="$newdlprefiles" + fi + $RM $output + # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test "x$bindir" != x ; + then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" - continue - fi +# The name that we can dlopen(3). +dlname='$tdlname' - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. +# Names of this library. +library_names='$library_names' - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit $EXIT_FAILURE - fi - ;; +# The name of the static archive. +old_library='$old_library' - *.lo) - # Just add the directory containing the .lo file. - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - ;; +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' - *) - $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 - continue - ;; - esac +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done +# Version information for $libname. +current=$current +age=$age +revision=$revision - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" +# Is this an already installed library? +installed=$installed - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac +# Should we warn about portability when linking against -modules? +shouldnotlink=$module - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` - args="$args \"$file\"" - done +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' - if test -z "$run"; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } - # Restore saved environment variables - for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES - do - eval "if test \"\${save_$lt_var+set}\" = set; then - $lt_var=\$save_$lt_var; export $lt_var - else - $lt_unset $lt_var - fi" - done + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} +{ test "$mode" = link || test "$mode" = relink; } && + func_mode_link ${1+"$@"} - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" - fi - $echo "$cmd$args" - exit $EXIT_SUCCESS - fi - ;; - # libtool clean and uninstall mode - clean | uninstall) - modename="$modename: $mode" - rm="$nonopt" +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" files= rmforce= exit_status=0 @@ -6494,30 +8541,28 @@ for arg do case $arg in - -f) rm="$rm $arg"; rmforce=yes ;; - -*) rm="$rm $arg" ;; + -f) RM="$RM $arg"; rmforce=yes ;; + -*) RM="$RM $arg" ;; *) files="$files $arg" ;; esac done - if test -z "$rm"; then - $echo "$modename: you must specify an RM program" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" rmdirs= origobjdir="$objdir" for file in $files; do - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$file"; then - dir=. + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then objdir="$origobjdir" else objdir="$dir/$origobjdir" fi - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + func_basename "$file" + name="$func_basename_result" test "$mode" = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates @@ -6529,9 +8574,9 @@ fi # Don't error if the file doesn't exist and rm -f was used. - if (test -L "$file") >/dev/null 2>&1 \ - || (test -h "$file") >/dev/null 2>&1 \ - || test -f "$file"; then + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then : elif test -d "$file"; then exit_status=1 @@ -6545,8 +8590,8 @@ case $name in *.la) # Possibly a libtool archive, so verify it. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - . $dir/$name + if func_lalib_p "$file"; then + func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do @@ -6561,39 +8606,17 @@ *" $dlname "*) ;; *) rmfiles="$rmfiles $objdir/$dlname" ;; esac - test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. - cmds=$postuninstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. - cmds=$old_postuninstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; @@ -6603,20 +8626,20 @@ *.lo) # Possibly a libtool object, so verify it. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if func_lalib_p "$file"; then # Read the .lo file - . $dir/$name + func_source $dir/$name # Add PIC object to the list of files to remove. - if test -n "$pic_object" \ - && test "$pic_object" != none; then + if test -n "$pic_object" && + test "$pic_object" != none; then rmfiles="$rmfiles $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" \ - && test "$non_pic_object" != none; then + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then rmfiles="$rmfiles $dir/$non_pic_object" fi fi @@ -6627,17 +8650,26 @@ noexename=$name case $file in *.exe) - file=`$echo $file|${SED} 's,.exe$,,'` - noexename=`$echo $name|${SED} 's,.exe$,,'` + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe rmfiles="$rmfiles $file" ;; esac # Do a test to see if this is a libtool program. - if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - relink_command= - . $dir/$noexename + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + rmfiles="$rmfiles $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles @@ -6652,239 +8684,38 @@ fi ;; esac - $show "$rm $rmfiles" - $run $rm $rmfiles || exit_status=1 + func_show_eval "$RM $rmfiles" 'exit_status=1' done objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then - $show "rmdir $dir" - $run rmdir $dir >/dev/null 2>&1 + func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status - ;; +} - "") - $echo "$modename: you must specify a MODE" 1>&2 - $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE - ;; - esac +{ test "$mode" = uninstall || test "$mode" = clean; } && + func_mode_uninstall ${1+"$@"} - if test -z "$exec_cmd"; then - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE - fi -fi # test -z "$show_help" +test -z "$mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$mode'" if test -n "$exec_cmd"; then - eval exec $exec_cmd + eval exec "$exec_cmd" exit $EXIT_FAILURE fi -# We need to display help for each of the modes. -case $mode in -"") $echo \ -"Usage: $modename [OPTION]... [MODE-ARG]... - -Provide generalized library-building support services. - - --config show all configuration variables - --debug enable verbose shell tracing --n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --finish same as \`--mode=finish' - --help display this help message and exit - --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] - --quiet same as \`--silent' - --silent don't print informational messages - --tag=TAG use configuration variables from tag TAG - --version print version information - -MODE must be one of the following: - - clean remove files from the build directory - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE. - -Report bugs to ." - exit $EXIT_SUCCESS - ;; - -clean) - $echo \ -"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - -compile) - $echo \ -"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only - -static always build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - -execute) - $echo \ -"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - -finish) - $echo \ -"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - -install) - $echo \ -"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - -link) - $echo \ -"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects - -precious-files-regex REGEX - don't remove output files matching REGEX - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of uninstalled libtool libraries - -static-libtool-libs - do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - -uninstall) - $echo \ -"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - -*) - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; -esac +exit $exit_status -$echo -$echo "Try \`$modename --help' for more information about other modes." - -exit $? # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting @@ -6898,14 +8729,17 @@ # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared -disable_libs=shared +build_libtool_libs=no +build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static -disable_libs=static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: +# vi:sw=2 + diff -Nru libantlr3c-3.2/m4/libtool.m4 libantlr3c-3.4+dfsg/m4/libtool.m4 --- libantlr3c-3.2/m4/libtool.m4 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/m4/libtool.m4 2011-07-19 18:14:22.000000000 +0000 @@ -0,0 +1,7441 @@ +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, +# Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +m4_define([_LT_COPYING], [dnl +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, +# Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +]) + +# serial 57 LT_INIT + + +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. +m4_defun([LT_PREREQ], +[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, + [m4_default([$3], + [m4_fatal([Libtool version $1 or higher is required], + 63)])], + [$2])]) + + +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters +m4_defun([_LT_CHECK_BUILDDIR], +[case `pwd` in + *\ * | *\ *) + AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +esac +]) + + +# LT_INIT([OPTIONS]) +# ------------------ +AC_DEFUN([LT_INIT], +[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT +AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +AC_BEFORE([$0], [LT_LANG])dnl +AC_BEFORE([$0], [LT_OUTPUT])dnl +AC_BEFORE([$0], [LTDL_INIT])dnl +m4_require([_LT_CHECK_BUILDDIR])dnl + +dnl Autoconf doesn't catch unexpanded LT_ macros by default: +m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +dnl unless we require an AC_DEFUNed macro: +AC_REQUIRE([LTOPTIONS_VERSION])dnl +AC_REQUIRE([LTSUGAR_VERSION])dnl +AC_REQUIRE([LTVERSION_VERSION])dnl +AC_REQUIRE([LTOBSOLETE_VERSION])dnl +m4_require([_LT_PROG_LTMAIN])dnl + +_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) + +dnl Parse OPTIONS +_LT_SET_OPTIONS([$0], [$1]) + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +_LT_SETUP + +# Only expand once: +m4_define([LT_INIT]) +])# LT_INIT + +# Old names: +AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + + +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +m4_defun([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +]) + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +m4_defun([_LT_FILEUTILS_DEFAULTS], +[: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} +])# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +m4_defun([_LT_SETUP], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl + +_LT_DECL([], [host_alias], [0], [The host system])dnl +_LT_DECL([], [host], [0])dnl +_LT_DECL([], [host_os], [0])dnl +dnl +_LT_DECL([], [build_alias], [0], [The build system])dnl +_LT_DECL([], [build], [0])dnl +_LT_DECL([], [build_os], [0])dnl +dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +test -z "$LN_S" && LN_S="ln -s" +_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl +dnl +AC_REQUIRE([LT_CMD_MAX_LEN])dnl +_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_CMD_RELOAD])dnl +m4_require([_LT_CHECK_MAGIC_METHOD])dnl +m4_require([_LT_CMD_OLD_ARCHIVE])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl + +_LT_CONFIG_LIBTOOL_INIT([ +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi +]) +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +_LT_CHECK_OBJDIR + +m4_require([_LT_TAG_COMPILER])dnl + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +_LT_CC_BASENAME([$compiler]) + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + _LT_PATH_MAGIC + fi + ;; +esac + +# Use C for the default configuration in the libtool script +LT_SUPPORTED_TAG([CC]) +_LT_LANG_C_CONFIG +_LT_LANG_DEFAULT_CONFIG +_LT_CONFIG_COMMANDS +])# _LT_SETUP + + +# _LT_PREPARE_SED_QUOTE_VARS +# -------------------------- +# Define a few sed substitution that help us do robust quoting. +m4_defun([_LT_PREPARE_SED_QUOTE_VARS], +[# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +]) + +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from `configure', and `config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# `config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +m4_defun([_LT_PROG_LTMAIN], +[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +ltmain="$ac_aux_dir/ltmain.sh" +])# _LT_PROG_LTMAIN + + +## ------------------------------------- ## +## Accumulate code for creating libtool. ## +## ------------------------------------- ## + +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the `libtool' +# label. + + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL_INIT], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_INIT], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- +m4_defun([_LT_CONFIG_SAVE_COMMANDS], +[_LT_CONFIG_LIBTOOL([$1]) +_LT_CONFIG_LIBTOOL_INIT([$2]) +]) + + +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. +m4_define([_LT_FORMAT_COMMENT], +[m4_ifval([$1], [ +m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], + [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +)]) + + + +## ------------------------ ## +## FIXME: Eliminate VARNAME ## +## ------------------------ ## + + +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. +m4_define([_LT_DECL], +[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], + [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], + [m4_ifval([$1], [$1], [$2])]) + lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) + m4_ifval([$4], + [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) + lt_dict_add_subkey([lt_decl_dict], [$2], + [tagged?], [m4_ifval([$5], [yes], [no])])]) +]) + + +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- +m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_tag_varnames], +[_lt_decl_filter([tagged?], [yes], $@)]) + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- +m4_define([_lt_decl_filter], +[m4_case([$#], + [0], [m4_fatal([$0: too few arguments: $#])], + [1], [m4_fatal([$0: too few arguments: $#: $1])], + [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], + [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], + [lt_dict_filter([lt_decl_dict], $@)])[]dnl +]) + + +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- +m4_define([lt_decl_quote_varnames], +[_lt_decl_filter([value], [1], $@)]) + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_dquote_varnames], +[_lt_decl_filter([value], [2], $@)]) + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_varnames_tagged], +[m4_assert([$# <= 2])dnl +_$0(m4_quote(m4_default([$1], [[, ]])), + m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), + m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +m4_define([_lt_decl_varnames_tagged], +[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_all_varnames], +[_$0(m4_quote(m4_default([$1], [[, ]])), + m4_if([$2], [], + m4_quote(lt_decl_varnames), + m4_quote(m4_shift($@))))[]dnl +]) +m4_define([_lt_decl_all_varnames], +[lt_join($@, lt_decl_varnames_tagged([$1], + lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +]) + + +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to `config.status' so that its +# declaration there will have the same value as in `configure'. VARNAME +# must have a single quote delimited value for this to work. +m4_define([_LT_CONFIG_STATUS_DECLARE], +[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) + + +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags="_LT_TAGS"dnl +]) + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) + + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into `config.status', and then the shell code to quote escape them in +# for loops in `config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$[]1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +_LT_OUTPUT_LIBTOOL_INIT +]) + +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# `#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +m4_ifdef([AS_INIT_GENERATED], +[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], +[m4_defun([_LT_GENERATED_FILE_INIT], +[m4_require([AS_PREPARE])]dnl +[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl +[lt_write_fail=0 +cat >$1 <<_ASEOF || lt_write_fail=1 +#! $SHELL +# Generated by $as_me. +$2 +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$1 <<\_ASEOF || lt_write_fail=1 +AS_SHELL_SANITIZE +_AS_PREPARE +exec AS_MESSAGE_FD>&1 +_ASEOF +test $lt_write_fail = 0 && chmod +x $1[]dnl +m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], +[# Run this file to recreate a libtool stub with the current configuration.]) + +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD + +lt_cl_help="\ +\`$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. + +Usage: $[0] [[OPTIONS]] + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + +Report bugs to ." + +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. + +Copyright (C) 2010 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." + +while test $[#] != 0 +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; + + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try \`$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try \`$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null +fi +_LTEOF + +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec AS_MESSAGE_LOG_FD>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec AS_MESSAGE_LOG_FD>>config.log +$lt_cl_success || AS_EXIT(1) +])# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +_LT_COPYING +_LT_LIBTOOL_TAGS + +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + _LT_PROG_LTMAIN + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + _LT_PROG_XSI_SHELLFNS + + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +], +[cat <<_LT_EOF >> "$ofile" + +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) + + +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) +dnl AC_DEFUN([AC_LIBTOOL_RC], []) + + +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_TAG_COMPILER + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +])# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi]) + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], + [lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS="$save_LDFLAGS" + ]) + AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], + [lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD + $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + ]) + case $host_os in + rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[[012]]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac +]) + + +# _LT_DARWIN_LINKER_FEATURES +# -------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + m4_if([$1], [CXX], +[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) + +# _LT_SYS_MODULE_PATH_AIX +# ----------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_SYS_MODULE_PATH_AIX + + +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[m4_divert_text([M4SH-INIT], [$1 +])])# _LT_SHELL_INIT + + + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script which will find a shell with a builtin +# printf (which we can use as an echo command). +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +AC_MSG_CHECKING([how to print strings]) +# Test print first, because it will be a builtin if present. +if test "X`print -r -- -n 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$[]1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +case "$ECHO" in + printf*) AC_MSG_RESULT([printf]) ;; + print*) AC_MSG_RESULT([print -r]) ;; + *) AC_MSG_RESULT([cat]) ;; +esac + +m4_ifdef([_AS_DETECT_SUGGESTED], +[_AS_DETECT_SUGGESTED([ + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) + +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) +])# _LT_PROG_ECHO_BACKSLASH + + +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" +])# _LT_ENABLE_LOCK + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[AC_CHECK_TOOL(AR, ar, false) +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1]) + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +_LT_DECL([], [lock_old_archive_extraction], [0], + [Whether to use a lock for old archive extraction]) +])# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $RM conftest* +]) + +if test x"[$]$2" = xyes; then + m4_if([$5], , :, [$5]) +else + m4_if([$6], , :, [$6]) +fi +])# _LT_COMPILER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + m4_if([$4], , :, [$4]) +else + m4_if([$5], , :, [$5]) +fi +])# _LT_LINKER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN + +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + + +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN + + +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +[#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +void fnord () __attribute__((visibility("default"))); +#endif + +void fnord () { int i=42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +}] +_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_TRY_DLOPEN_SELF + + +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF + +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +]) +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O + + +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) + +hard_links="nottested" +if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS + + +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", + [Define to the sub-directory in which libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR + + +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || + test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH + + +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB + + +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +AC_MSG_CHECKING([dynamic linker characteristics]) +m4_if([$1], + [], [ +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[[4-9]]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[123]]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[[3-9]]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], + [lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [lt_cv_shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ]) + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Add ABI-specific directories to the system library path. + sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" + + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [install_override_mode], [1], + [Permission mode override for installation of shared libraries]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], + [Run-time system search path for libraries]) +])# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program which can recognize shared library +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="m4_if([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX + +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + + +# _LT_PATH_MAGIC +# -------------- +# find a file program which can recognize a shared library +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# _LT_PATH_MAGIC + + +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PROG_ECHO_BACKSLASH])dnl + +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no])dnl + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[[3-9]]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method == "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD + + +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi]) +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + AC_SUBST([DUMPBIN]) + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + + +# LT_LIB_M +# -------- +# check for math library +AC_DEFUN([LT_LIB_M], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +AC_SUBST([LIBM]) +])# LT_LIB_M + +# Old name: +AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_CHECK_LIBM], []) + + +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +m4_defun([_LT_COMPILER_NO_RTTI], +[m4_require([_LT_TAG_COMPILER])dnl + +_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; + *) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; + esac + + _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], + [Compiler flag to turn off builtin functions]) +])# _LT_COMPILER_NO_RTTI + + +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- +m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([LT_PATH_NM])dnl +AC_REQUIRE([LT_PATH_LD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_TAG_COMPILER])dnl + +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris*) + symcode='[[BDRT]]' + ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[[]] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi + +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +]) # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= + +AC_MSG_CHECKING([for $compiler option to produce PIC]) +m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix[[4-9]]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + hpux9* | hpux10* | hpux11*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ F* | *Sun*Fortran*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + *Sun\ C*) + # Sun C 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + esac + ;; + esac + ;; + + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + rdos*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; +esac +AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + +# +# Check to make sure the static flag actually works. +# +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC + + +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global defined + # symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] +], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. +dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_TAGVAR(ld_shlibs, $1)=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; + *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag= + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + sunos4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + bsdi[[45]]*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + freebsd1*) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + m4_if($1, [], [ + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + _LT_LINKER_OPTION([if $CC understands -b], + _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + ;; + esac + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + AC_LINK_IFELSE(int foo(void) {}, + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + ) + LDFLAGS="$save_LDFLAGS" + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + solaris*) + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + fi + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + ;; + esac + fi + fi +]) +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) + +# +# Do we need to explicitly link libc? +# +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_CACHE_CHECK([whether -lc should be explicitly linked in], + [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), + [$RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + ;; + esac + fi + ;; +esac + +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], + [[If ld is used when linking, flag to hardcode $libdir into a binary + during linking. This must work even if $libdir does not exist]]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting ${shlibpath_var} if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [fix_srcfile_path], [1], + [Fix the shell variable $srcfile for the compiler]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report which library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) +fi +AC_LANG_POP +CC="$lt_save_CC" +])# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +else + _lt_caught_CXX_error=yes +fi + +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + freebsd[[12]]*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + gnu*) + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ + '"$_LT_TAGVAR(old_archive_cmds, $1)" + _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ + '"$_LT_TAGVAR(reload_cmds, $1)" + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + + _LT_TAGVAR(GCC, $1)="$GXX" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +]) +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case $p in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + else + prev= + fi + + if test "$pre_test_object_deps_done" = no; then + case $p in + -L* | -R*) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)="${prev}${p}" + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi + ;; + + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)="$p" + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)="$p" + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac +]) + +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_LANG_PUSH(Fortran 77) +if test -z "$F77" || test "X$F77" = "Xno"; then + _lt_disable_F77=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_F77" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + CC=${F77-"f77"} + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$G77" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" +fi # test "$_lt_disable_F77" != yes + +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_LANG_PUSH(Fortran) + +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_FC" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + CC=${FC-"f95"} + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" +fi # test "$_lt_disable_FC" != yes + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC="$lt_save_CC" +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC="$lt_save_CC" +])# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +AC_MSG_RESULT([$xsi_shell]) +_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) + +AC_MSG_CHECKING([whether the shell understands "+="]) +lt_shell_append=no +( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +AC_MSG_RESULT([$lt_shell_append]) +_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PROG_XSI_SHELLFNS +# --------------------- +# Bourne and XSI compatible variants of some useful shell functions. +m4_defun([_LT_PROG_XSI_SHELLFNS], +[case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} + +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} + +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $[*] )) +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} + +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "${1}" | $SED "$basename"` +} + +dnl func_dirname_and_basename +dnl A portable version of this function is already defined in general.m4sh +dnl so there is no need for it here. + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} + +# sed scripts: +my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[[^=]]*=//' + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"` +} + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[[^.]]*$/.lo/'` +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$[@]"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF +esac + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$[1]+=\$[2]" +} +_LT_EOF + ;; + *) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$[1]=\$$[1]\$[2]" +} + +_LT_EOF + ;; + esac +]) diff -Nru libantlr3c-3.2/m4/lt~obsolete.m4 libantlr3c-3.4+dfsg/m4/lt~obsolete.m4 --- libantlr3c-3.2/m4/lt~obsolete.m4 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/m4/lt~obsolete.m4 2011-07-19 18:14:22.000000000 +0000 @@ -0,0 +1,98 @@ +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 5 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) diff -Nru libantlr3c-3.2/m4/ltoptions.m4 libantlr3c-3.4+dfsg/m4/ltoptions.m4 --- libantlr3c-3.2/m4/ltoptions.m4 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/m4/ltoptions.m4 2011-07-19 18:14:22.000000000 +0000 @@ -0,0 +1,369 @@ +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 7 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option `$2'])])[]dnl +]) + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl `shared' nor `disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + ]) +])# _LT_SET_OPTIONS + + +## --------------------------------- ## +## Macros to handle LT_INIT options. ## +## --------------------------------- ## + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE + + +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) + +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `dlopen' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac + +test -z "$AS" && AS=as +_LT_DECL([], [AS], [1], [Assembler program])dnl + +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl + +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +])# win32-dll + +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `win32-dll' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the `shared' and +# `disable-shared' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED + +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) + +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) + +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the `static' and +# `disable-static' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC + +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) + +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) + +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the `fast-install' +# and `disable-fast-install' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `fast-install' option into LT_INIT's first parameter.]) +]) + +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `disable-fast-install' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# LT_INIT options. +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) + +test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC + +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `pic-only' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + +## ----------------- ## +## LTDL_INIT Options ## +## ----------------- ## + +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) + +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) diff -Nru libantlr3c-3.2/m4/ltsugar.m4 libantlr3c-3.4+dfsg/m4/ltsugar.m4 --- libantlr3c-3.2/m4/ltsugar.m4 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/m4/ltsugar.m4 2011-07-19 18:14:22.000000000 +0000 @@ -0,0 +1,123 @@ +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59 which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl +]) diff -Nru libantlr3c-3.2/m4/ltversion.m4 libantlr3c-3.4+dfsg/m4/ltversion.m4 --- libantlr3c-3.2/m4/ltversion.m4 1970-01-01 00:00:00.000000000 +0000 +++ libantlr3c-3.4+dfsg/m4/ltversion.m4 2011-07-19 18:14:22.000000000 +0000 @@ -0,0 +1,23 @@ +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# Generated from ltversion.in. + +# serial 3175 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.2.10]) +m4_define([LT_PACKAGE_REVISION], [1.3175]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.2.10' +macro_revision='1.3175' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) +]) diff -Nru libantlr3c-3.2/Makefile.am libantlr3c-3.4+dfsg/Makefile.am --- libantlr3c-3.2/Makefile.am 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/Makefile.am 2011-06-22 22:32:14.000000000 +0000 @@ -25,10 +25,8 @@ src/antlr3parser.c \ src/antlr3rewritestreams.c \ src/antlr3string.c \ - src/antlr3stringstream.c \ src/antlr3tokenstream.c \ - src/antlr3treeparser.c \ - src/antlr3ucs2inputstream.c + src/antlr3treeparser.c libantlr3c_la_SOURCES = $(LIBSOURCES) @@ -60,7 +58,6 @@ include/antlr3recognizersharedstate.h \ include/antlr3rewritestreams.h \ include/antlr3string.h \ - include/antlr3stringstream.h \ include/antlr3tokenstream.h \ include/antlr3treeparser.h \ antlr3config.h diff -Nru libantlr3c-3.2/Makefile.in libantlr3c-3.4+dfsg/Makefile.in --- libantlr3c-3.2/Makefile.in 2009-12-11 22:55:09.000000000 +0000 +++ libantlr3c-3.4+dfsg/Makefile.in 2011-07-19 18:14:25.000000000 +0000 @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.9.6 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005 Free Software Foundation, Inc. +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -15,15 +16,12 @@ @SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = . +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c @@ -37,29 +35,47 @@ POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ +subdir = . DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(srcdir)/antlr3config.h.in $(top_srcdir)/configure AUTHORS \ COPYING ChangeLog INSTALL NEWS config.guess config.sub depcomp \ install-sh ltmain.sh missing -subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno configure.status.lineno + configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = antlr3config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" -libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) libantlr3c_la_LIBADD = am__objects_1 = antlr3baserecognizer.lo antlr3basetree.lo \ @@ -70,24 +86,27 @@ antlr3encodings.lo antlr3exception.lo antlr3filestream.lo \ antlr3inputstream.lo antlr3intstream.lo antlr3lexer.lo \ antlr3parser.lo antlr3rewritestreams.lo antlr3string.lo \ - antlr3stringstream.lo antlr3tokenstream.lo antlr3treeparser.lo \ - antlr3ucs2inputstream.lo + antlr3tokenstream.lo antlr3treeparser.lo am_libantlr3c_la_OBJECTS = $(am__objects_1) libantlr3c_la_OBJECTS = $(am_libantlr3c_la_OBJECTS) -DEFAULT_INCLUDES = -I. -I$(srcdir) -I. +libantlr3c_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(libantlr3c_la_LDFLAGS) $(LDFLAGS) -o $@ +DEFAULT_INCLUDES = -I.@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ + $(LDFLAGS) -o $@ SOURCES = $(libantlr3c_la_SOURCES) DIST_SOURCES = $(libantlr3c_la_SOURCES) -includeHEADERS_INSTALL = $(INSTALL_HEADER) HEADERS = $(include_HEADERS) ETAGS = etags CTAGS = ctags @@ -95,16 +114,14 @@ distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } + { test ! -d "$(distdir)" \ + || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr "$(distdir)"; }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AUTOCONF = @AUTOCONF@ @@ -116,43 +133,47 @@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -ECHO = @ECHO@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ +INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ -MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ -MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJECT_MODE = @OBJECT_MODE@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -161,13 +182,12 @@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ -am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -179,6 +199,7 @@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ +builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ @@ -206,8 +227,12 @@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ AUTOMAKE_OPTIONS = gnu AM_LIBTOOLFLAGS = ACLOCAL_AMFLAGS = -I m4 @@ -233,10 +258,8 @@ src/antlr3parser.c \ src/antlr3rewritestreams.c \ src/antlr3string.c \ - src/antlr3stringstream.c \ src/antlr3tokenstream.c \ - src/antlr3treeparser.c \ - src/antlr3ucs2inputstream.c + src/antlr3treeparser.c libantlr3c_la_SOURCES = $(LIBSOURCES) include_HEADERS = include/antlr3.h \ @@ -267,7 +290,6 @@ include/antlr3recognizersharedstate.h \ include/antlr3rewritestreams.h \ include/antlr3string.h \ - include/antlr3stringstream.h \ include/antlr3tokenstream.h \ include/antlr3treeparser.h \ antlr3config.h @@ -293,15 +315,15 @@ @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ - cd $(srcdir) && $(AUTOMAKE) --gnu \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -317,21 +339,22 @@ $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(srcdir) && $(AUTOCONF) + $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): antlr3config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ - $(MAKE) stamp-h1; \ + $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/antlr3config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status antlr3config.h $(srcdir)/antlr3config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_srcdir) && $(AUTOHEADER) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ @@ -339,21 +362,25 @@ -rm -f antlr3config.h stamp-h1 install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) - test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ if test -f $$p; then \ - f=$(am__strip_dir) \ - echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ - $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ + list2="$$list2 $$p"; \ else :; fi; \ - done + done; \ + test -z "$$list2" || { \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p=$(am__strip_dir) \ - echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ - $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ done clean-libLTLIBRARIES: @@ -365,7 +392,7 @@ rm -f "$${dir}/so_locations"; \ done libantlr3c.la: $(libantlr3c_la_OBJECTS) $(libantlr3c_la_DEPENDENCIES) - $(LINK) -rpath $(libdir) $(libantlr3c_la_LDFLAGS) $(libantlr3c_la_OBJECTS) $(libantlr3c_la_LIBADD) $(LIBS) + $(libantlr3c_la_LINK) -rpath $(libdir) $(libantlr3c_la_OBJECTS) $(libantlr3c_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) @@ -394,206 +421,190 @@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/antlr3parser.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/antlr3rewritestreams.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/antlr3string.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/antlr3stringstream.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/antlr3tokenstream.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/antlr3treeparser.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/antlr3ucs2inputstream.Plo@am__quote@ .c.o: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: -@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< antlr3baserecognizer.lo: src/antlr3baserecognizer.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3baserecognizer.lo -MD -MP -MF "$(DEPDIR)/antlr3baserecognizer.Tpo" -c -o antlr3baserecognizer.lo `test -f 'src/antlr3baserecognizer.c' || echo '$(srcdir)/'`src/antlr3baserecognizer.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3baserecognizer.Tpo" "$(DEPDIR)/antlr3baserecognizer.Plo"; else rm -f "$(DEPDIR)/antlr3baserecognizer.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3baserecognizer.lo -MD -MP -MF $(DEPDIR)/antlr3baserecognizer.Tpo -c -o antlr3baserecognizer.lo `test -f 'src/antlr3baserecognizer.c' || echo '$(srcdir)/'`src/antlr3baserecognizer.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3baserecognizer.Tpo $(DEPDIR)/antlr3baserecognizer.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3baserecognizer.c' object='antlr3baserecognizer.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3baserecognizer.lo `test -f 'src/antlr3baserecognizer.c' || echo '$(srcdir)/'`src/antlr3baserecognizer.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3baserecognizer.lo `test -f 'src/antlr3baserecognizer.c' || echo '$(srcdir)/'`src/antlr3baserecognizer.c antlr3basetree.lo: src/antlr3basetree.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3basetree.lo -MD -MP -MF "$(DEPDIR)/antlr3basetree.Tpo" -c -o antlr3basetree.lo `test -f 'src/antlr3basetree.c' || echo '$(srcdir)/'`src/antlr3basetree.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3basetree.Tpo" "$(DEPDIR)/antlr3basetree.Plo"; else rm -f "$(DEPDIR)/antlr3basetree.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3basetree.lo -MD -MP -MF $(DEPDIR)/antlr3basetree.Tpo -c -o antlr3basetree.lo `test -f 'src/antlr3basetree.c' || echo '$(srcdir)/'`src/antlr3basetree.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3basetree.Tpo $(DEPDIR)/antlr3basetree.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3basetree.c' object='antlr3basetree.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3basetree.lo `test -f 'src/antlr3basetree.c' || echo '$(srcdir)/'`src/antlr3basetree.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3basetree.lo `test -f 'src/antlr3basetree.c' || echo '$(srcdir)/'`src/antlr3basetree.c antlr3basetreeadaptor.lo: src/antlr3basetreeadaptor.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3basetreeadaptor.lo -MD -MP -MF "$(DEPDIR)/antlr3basetreeadaptor.Tpo" -c -o antlr3basetreeadaptor.lo `test -f 'src/antlr3basetreeadaptor.c' || echo '$(srcdir)/'`src/antlr3basetreeadaptor.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3basetreeadaptor.Tpo" "$(DEPDIR)/antlr3basetreeadaptor.Plo"; else rm -f "$(DEPDIR)/antlr3basetreeadaptor.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3basetreeadaptor.lo -MD -MP -MF $(DEPDIR)/antlr3basetreeadaptor.Tpo -c -o antlr3basetreeadaptor.lo `test -f 'src/antlr3basetreeadaptor.c' || echo '$(srcdir)/'`src/antlr3basetreeadaptor.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3basetreeadaptor.Tpo $(DEPDIR)/antlr3basetreeadaptor.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3basetreeadaptor.c' object='antlr3basetreeadaptor.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3basetreeadaptor.lo `test -f 'src/antlr3basetreeadaptor.c' || echo '$(srcdir)/'`src/antlr3basetreeadaptor.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3basetreeadaptor.lo `test -f 'src/antlr3basetreeadaptor.c' || echo '$(srcdir)/'`src/antlr3basetreeadaptor.c antlr3bitset.lo: src/antlr3bitset.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3bitset.lo -MD -MP -MF "$(DEPDIR)/antlr3bitset.Tpo" -c -o antlr3bitset.lo `test -f 'src/antlr3bitset.c' || echo '$(srcdir)/'`src/antlr3bitset.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3bitset.Tpo" "$(DEPDIR)/antlr3bitset.Plo"; else rm -f "$(DEPDIR)/antlr3bitset.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3bitset.lo -MD -MP -MF $(DEPDIR)/antlr3bitset.Tpo -c -o antlr3bitset.lo `test -f 'src/antlr3bitset.c' || echo '$(srcdir)/'`src/antlr3bitset.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3bitset.Tpo $(DEPDIR)/antlr3bitset.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3bitset.c' object='antlr3bitset.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3bitset.lo `test -f 'src/antlr3bitset.c' || echo '$(srcdir)/'`src/antlr3bitset.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3bitset.lo `test -f 'src/antlr3bitset.c' || echo '$(srcdir)/'`src/antlr3bitset.c antlr3collections.lo: src/antlr3collections.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3collections.lo -MD -MP -MF "$(DEPDIR)/antlr3collections.Tpo" -c -o antlr3collections.lo `test -f 'src/antlr3collections.c' || echo '$(srcdir)/'`src/antlr3collections.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3collections.Tpo" "$(DEPDIR)/antlr3collections.Plo"; else rm -f "$(DEPDIR)/antlr3collections.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3collections.lo -MD -MP -MF $(DEPDIR)/antlr3collections.Tpo -c -o antlr3collections.lo `test -f 'src/antlr3collections.c' || echo '$(srcdir)/'`src/antlr3collections.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3collections.Tpo $(DEPDIR)/antlr3collections.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3collections.c' object='antlr3collections.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3collections.lo `test -f 'src/antlr3collections.c' || echo '$(srcdir)/'`src/antlr3collections.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3collections.lo `test -f 'src/antlr3collections.c' || echo '$(srcdir)/'`src/antlr3collections.c antlr3commontoken.lo: src/antlr3commontoken.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3commontoken.lo -MD -MP -MF "$(DEPDIR)/antlr3commontoken.Tpo" -c -o antlr3commontoken.lo `test -f 'src/antlr3commontoken.c' || echo '$(srcdir)/'`src/antlr3commontoken.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3commontoken.Tpo" "$(DEPDIR)/antlr3commontoken.Plo"; else rm -f "$(DEPDIR)/antlr3commontoken.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3commontoken.lo -MD -MP -MF $(DEPDIR)/antlr3commontoken.Tpo -c -o antlr3commontoken.lo `test -f 'src/antlr3commontoken.c' || echo '$(srcdir)/'`src/antlr3commontoken.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3commontoken.Tpo $(DEPDIR)/antlr3commontoken.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3commontoken.c' object='antlr3commontoken.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3commontoken.lo `test -f 'src/antlr3commontoken.c' || echo '$(srcdir)/'`src/antlr3commontoken.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3commontoken.lo `test -f 'src/antlr3commontoken.c' || echo '$(srcdir)/'`src/antlr3commontoken.c antlr3commontree.lo: src/antlr3commontree.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3commontree.lo -MD -MP -MF "$(DEPDIR)/antlr3commontree.Tpo" -c -o antlr3commontree.lo `test -f 'src/antlr3commontree.c' || echo '$(srcdir)/'`src/antlr3commontree.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3commontree.Tpo" "$(DEPDIR)/antlr3commontree.Plo"; else rm -f "$(DEPDIR)/antlr3commontree.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3commontree.lo -MD -MP -MF $(DEPDIR)/antlr3commontree.Tpo -c -o antlr3commontree.lo `test -f 'src/antlr3commontree.c' || echo '$(srcdir)/'`src/antlr3commontree.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3commontree.Tpo $(DEPDIR)/antlr3commontree.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3commontree.c' object='antlr3commontree.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3commontree.lo `test -f 'src/antlr3commontree.c' || echo '$(srcdir)/'`src/antlr3commontree.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3commontree.lo `test -f 'src/antlr3commontree.c' || echo '$(srcdir)/'`src/antlr3commontree.c antlr3commontreeadaptor.lo: src/antlr3commontreeadaptor.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3commontreeadaptor.lo -MD -MP -MF "$(DEPDIR)/antlr3commontreeadaptor.Tpo" -c -o antlr3commontreeadaptor.lo `test -f 'src/antlr3commontreeadaptor.c' || echo '$(srcdir)/'`src/antlr3commontreeadaptor.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3commontreeadaptor.Tpo" "$(DEPDIR)/antlr3commontreeadaptor.Plo"; else rm -f "$(DEPDIR)/antlr3commontreeadaptor.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3commontreeadaptor.lo -MD -MP -MF $(DEPDIR)/antlr3commontreeadaptor.Tpo -c -o antlr3commontreeadaptor.lo `test -f 'src/antlr3commontreeadaptor.c' || echo '$(srcdir)/'`src/antlr3commontreeadaptor.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3commontreeadaptor.Tpo $(DEPDIR)/antlr3commontreeadaptor.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3commontreeadaptor.c' object='antlr3commontreeadaptor.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3commontreeadaptor.lo `test -f 'src/antlr3commontreeadaptor.c' || echo '$(srcdir)/'`src/antlr3commontreeadaptor.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3commontreeadaptor.lo `test -f 'src/antlr3commontreeadaptor.c' || echo '$(srcdir)/'`src/antlr3commontreeadaptor.c antlr3commontreenodestream.lo: src/antlr3commontreenodestream.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3commontreenodestream.lo -MD -MP -MF "$(DEPDIR)/antlr3commontreenodestream.Tpo" -c -o antlr3commontreenodestream.lo `test -f 'src/antlr3commontreenodestream.c' || echo '$(srcdir)/'`src/antlr3commontreenodestream.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3commontreenodestream.Tpo" "$(DEPDIR)/antlr3commontreenodestream.Plo"; else rm -f "$(DEPDIR)/antlr3commontreenodestream.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3commontreenodestream.lo -MD -MP -MF $(DEPDIR)/antlr3commontreenodestream.Tpo -c -o antlr3commontreenodestream.lo `test -f 'src/antlr3commontreenodestream.c' || echo '$(srcdir)/'`src/antlr3commontreenodestream.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3commontreenodestream.Tpo $(DEPDIR)/antlr3commontreenodestream.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3commontreenodestream.c' object='antlr3commontreenodestream.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3commontreenodestream.lo `test -f 'src/antlr3commontreenodestream.c' || echo '$(srcdir)/'`src/antlr3commontreenodestream.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3commontreenodestream.lo `test -f 'src/antlr3commontreenodestream.c' || echo '$(srcdir)/'`src/antlr3commontreenodestream.c antlr3convertutf.lo: src/antlr3convertutf.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3convertutf.lo -MD -MP -MF "$(DEPDIR)/antlr3convertutf.Tpo" -c -o antlr3convertutf.lo `test -f 'src/antlr3convertutf.c' || echo '$(srcdir)/'`src/antlr3convertutf.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3convertutf.Tpo" "$(DEPDIR)/antlr3convertutf.Plo"; else rm -f "$(DEPDIR)/antlr3convertutf.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3convertutf.lo -MD -MP -MF $(DEPDIR)/antlr3convertutf.Tpo -c -o antlr3convertutf.lo `test -f 'src/antlr3convertutf.c' || echo '$(srcdir)/'`src/antlr3convertutf.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3convertutf.Tpo $(DEPDIR)/antlr3convertutf.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3convertutf.c' object='antlr3convertutf.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3convertutf.lo `test -f 'src/antlr3convertutf.c' || echo '$(srcdir)/'`src/antlr3convertutf.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3convertutf.lo `test -f 'src/antlr3convertutf.c' || echo '$(srcdir)/'`src/antlr3convertutf.c antlr3cyclicdfa.lo: src/antlr3cyclicdfa.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3cyclicdfa.lo -MD -MP -MF "$(DEPDIR)/antlr3cyclicdfa.Tpo" -c -o antlr3cyclicdfa.lo `test -f 'src/antlr3cyclicdfa.c' || echo '$(srcdir)/'`src/antlr3cyclicdfa.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3cyclicdfa.Tpo" "$(DEPDIR)/antlr3cyclicdfa.Plo"; else rm -f "$(DEPDIR)/antlr3cyclicdfa.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3cyclicdfa.lo -MD -MP -MF $(DEPDIR)/antlr3cyclicdfa.Tpo -c -o antlr3cyclicdfa.lo `test -f 'src/antlr3cyclicdfa.c' || echo '$(srcdir)/'`src/antlr3cyclicdfa.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3cyclicdfa.Tpo $(DEPDIR)/antlr3cyclicdfa.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3cyclicdfa.c' object='antlr3cyclicdfa.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3cyclicdfa.lo `test -f 'src/antlr3cyclicdfa.c' || echo '$(srcdir)/'`src/antlr3cyclicdfa.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3cyclicdfa.lo `test -f 'src/antlr3cyclicdfa.c' || echo '$(srcdir)/'`src/antlr3cyclicdfa.c antlr3debughandlers.lo: src/antlr3debughandlers.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3debughandlers.lo -MD -MP -MF "$(DEPDIR)/antlr3debughandlers.Tpo" -c -o antlr3debughandlers.lo `test -f 'src/antlr3debughandlers.c' || echo '$(srcdir)/'`src/antlr3debughandlers.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3debughandlers.Tpo" "$(DEPDIR)/antlr3debughandlers.Plo"; else rm -f "$(DEPDIR)/antlr3debughandlers.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3debughandlers.lo -MD -MP -MF $(DEPDIR)/antlr3debughandlers.Tpo -c -o antlr3debughandlers.lo `test -f 'src/antlr3debughandlers.c' || echo '$(srcdir)/'`src/antlr3debughandlers.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3debughandlers.Tpo $(DEPDIR)/antlr3debughandlers.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3debughandlers.c' object='antlr3debughandlers.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3debughandlers.lo `test -f 'src/antlr3debughandlers.c' || echo '$(srcdir)/'`src/antlr3debughandlers.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3debughandlers.lo `test -f 'src/antlr3debughandlers.c' || echo '$(srcdir)/'`src/antlr3debughandlers.c antlr3encodings.lo: src/antlr3encodings.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3encodings.lo -MD -MP -MF "$(DEPDIR)/antlr3encodings.Tpo" -c -o antlr3encodings.lo `test -f 'src/antlr3encodings.c' || echo '$(srcdir)/'`src/antlr3encodings.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3encodings.Tpo" "$(DEPDIR)/antlr3encodings.Plo"; else rm -f "$(DEPDIR)/antlr3encodings.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3encodings.lo -MD -MP -MF $(DEPDIR)/antlr3encodings.Tpo -c -o antlr3encodings.lo `test -f 'src/antlr3encodings.c' || echo '$(srcdir)/'`src/antlr3encodings.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3encodings.Tpo $(DEPDIR)/antlr3encodings.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3encodings.c' object='antlr3encodings.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3encodings.lo `test -f 'src/antlr3encodings.c' || echo '$(srcdir)/'`src/antlr3encodings.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3encodings.lo `test -f 'src/antlr3encodings.c' || echo '$(srcdir)/'`src/antlr3encodings.c antlr3exception.lo: src/antlr3exception.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3exception.lo -MD -MP -MF "$(DEPDIR)/antlr3exception.Tpo" -c -o antlr3exception.lo `test -f 'src/antlr3exception.c' || echo '$(srcdir)/'`src/antlr3exception.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3exception.Tpo" "$(DEPDIR)/antlr3exception.Plo"; else rm -f "$(DEPDIR)/antlr3exception.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3exception.lo -MD -MP -MF $(DEPDIR)/antlr3exception.Tpo -c -o antlr3exception.lo `test -f 'src/antlr3exception.c' || echo '$(srcdir)/'`src/antlr3exception.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3exception.Tpo $(DEPDIR)/antlr3exception.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3exception.c' object='antlr3exception.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3exception.lo `test -f 'src/antlr3exception.c' || echo '$(srcdir)/'`src/antlr3exception.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3exception.lo `test -f 'src/antlr3exception.c' || echo '$(srcdir)/'`src/antlr3exception.c antlr3filestream.lo: src/antlr3filestream.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3filestream.lo -MD -MP -MF "$(DEPDIR)/antlr3filestream.Tpo" -c -o antlr3filestream.lo `test -f 'src/antlr3filestream.c' || echo '$(srcdir)/'`src/antlr3filestream.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3filestream.Tpo" "$(DEPDIR)/antlr3filestream.Plo"; else rm -f "$(DEPDIR)/antlr3filestream.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3filestream.lo -MD -MP -MF $(DEPDIR)/antlr3filestream.Tpo -c -o antlr3filestream.lo `test -f 'src/antlr3filestream.c' || echo '$(srcdir)/'`src/antlr3filestream.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3filestream.Tpo $(DEPDIR)/antlr3filestream.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3filestream.c' object='antlr3filestream.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3filestream.lo `test -f 'src/antlr3filestream.c' || echo '$(srcdir)/'`src/antlr3filestream.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3filestream.lo `test -f 'src/antlr3filestream.c' || echo '$(srcdir)/'`src/antlr3filestream.c antlr3inputstream.lo: src/antlr3inputstream.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3inputstream.lo -MD -MP -MF "$(DEPDIR)/antlr3inputstream.Tpo" -c -o antlr3inputstream.lo `test -f 'src/antlr3inputstream.c' || echo '$(srcdir)/'`src/antlr3inputstream.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3inputstream.Tpo" "$(DEPDIR)/antlr3inputstream.Plo"; else rm -f "$(DEPDIR)/antlr3inputstream.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3inputstream.lo -MD -MP -MF $(DEPDIR)/antlr3inputstream.Tpo -c -o antlr3inputstream.lo `test -f 'src/antlr3inputstream.c' || echo '$(srcdir)/'`src/antlr3inputstream.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3inputstream.Tpo $(DEPDIR)/antlr3inputstream.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3inputstream.c' object='antlr3inputstream.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3inputstream.lo `test -f 'src/antlr3inputstream.c' || echo '$(srcdir)/'`src/antlr3inputstream.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3inputstream.lo `test -f 'src/antlr3inputstream.c' || echo '$(srcdir)/'`src/antlr3inputstream.c antlr3intstream.lo: src/antlr3intstream.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3intstream.lo -MD -MP -MF "$(DEPDIR)/antlr3intstream.Tpo" -c -o antlr3intstream.lo `test -f 'src/antlr3intstream.c' || echo '$(srcdir)/'`src/antlr3intstream.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3intstream.Tpo" "$(DEPDIR)/antlr3intstream.Plo"; else rm -f "$(DEPDIR)/antlr3intstream.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3intstream.lo -MD -MP -MF $(DEPDIR)/antlr3intstream.Tpo -c -o antlr3intstream.lo `test -f 'src/antlr3intstream.c' || echo '$(srcdir)/'`src/antlr3intstream.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3intstream.Tpo $(DEPDIR)/antlr3intstream.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3intstream.c' object='antlr3intstream.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3intstream.lo `test -f 'src/antlr3intstream.c' || echo '$(srcdir)/'`src/antlr3intstream.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3intstream.lo `test -f 'src/antlr3intstream.c' || echo '$(srcdir)/'`src/antlr3intstream.c antlr3lexer.lo: src/antlr3lexer.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3lexer.lo -MD -MP -MF "$(DEPDIR)/antlr3lexer.Tpo" -c -o antlr3lexer.lo `test -f 'src/antlr3lexer.c' || echo '$(srcdir)/'`src/antlr3lexer.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3lexer.Tpo" "$(DEPDIR)/antlr3lexer.Plo"; else rm -f "$(DEPDIR)/antlr3lexer.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3lexer.lo -MD -MP -MF $(DEPDIR)/antlr3lexer.Tpo -c -o antlr3lexer.lo `test -f 'src/antlr3lexer.c' || echo '$(srcdir)/'`src/antlr3lexer.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3lexer.Tpo $(DEPDIR)/antlr3lexer.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3lexer.c' object='antlr3lexer.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3lexer.lo `test -f 'src/antlr3lexer.c' || echo '$(srcdir)/'`src/antlr3lexer.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3lexer.lo `test -f 'src/antlr3lexer.c' || echo '$(srcdir)/'`src/antlr3lexer.c antlr3parser.lo: src/antlr3parser.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3parser.lo -MD -MP -MF "$(DEPDIR)/antlr3parser.Tpo" -c -o antlr3parser.lo `test -f 'src/antlr3parser.c' || echo '$(srcdir)/'`src/antlr3parser.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3parser.Tpo" "$(DEPDIR)/antlr3parser.Plo"; else rm -f "$(DEPDIR)/antlr3parser.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3parser.lo -MD -MP -MF $(DEPDIR)/antlr3parser.Tpo -c -o antlr3parser.lo `test -f 'src/antlr3parser.c' || echo '$(srcdir)/'`src/antlr3parser.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3parser.Tpo $(DEPDIR)/antlr3parser.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3parser.c' object='antlr3parser.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3parser.lo `test -f 'src/antlr3parser.c' || echo '$(srcdir)/'`src/antlr3parser.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3parser.lo `test -f 'src/antlr3parser.c' || echo '$(srcdir)/'`src/antlr3parser.c antlr3rewritestreams.lo: src/antlr3rewritestreams.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3rewritestreams.lo -MD -MP -MF "$(DEPDIR)/antlr3rewritestreams.Tpo" -c -o antlr3rewritestreams.lo `test -f 'src/antlr3rewritestreams.c' || echo '$(srcdir)/'`src/antlr3rewritestreams.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3rewritestreams.Tpo" "$(DEPDIR)/antlr3rewritestreams.Plo"; else rm -f "$(DEPDIR)/antlr3rewritestreams.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3rewritestreams.lo -MD -MP -MF $(DEPDIR)/antlr3rewritestreams.Tpo -c -o antlr3rewritestreams.lo `test -f 'src/antlr3rewritestreams.c' || echo '$(srcdir)/'`src/antlr3rewritestreams.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3rewritestreams.Tpo $(DEPDIR)/antlr3rewritestreams.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3rewritestreams.c' object='antlr3rewritestreams.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3rewritestreams.lo `test -f 'src/antlr3rewritestreams.c' || echo '$(srcdir)/'`src/antlr3rewritestreams.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3rewritestreams.lo `test -f 'src/antlr3rewritestreams.c' || echo '$(srcdir)/'`src/antlr3rewritestreams.c antlr3string.lo: src/antlr3string.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3string.lo -MD -MP -MF "$(DEPDIR)/antlr3string.Tpo" -c -o antlr3string.lo `test -f 'src/antlr3string.c' || echo '$(srcdir)/'`src/antlr3string.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3string.Tpo" "$(DEPDIR)/antlr3string.Plo"; else rm -f "$(DEPDIR)/antlr3string.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3string.lo -MD -MP -MF $(DEPDIR)/antlr3string.Tpo -c -o antlr3string.lo `test -f 'src/antlr3string.c' || echo '$(srcdir)/'`src/antlr3string.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3string.Tpo $(DEPDIR)/antlr3string.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3string.c' object='antlr3string.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3string.lo `test -f 'src/antlr3string.c' || echo '$(srcdir)/'`src/antlr3string.c - -antlr3stringstream.lo: src/antlr3stringstream.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3stringstream.lo -MD -MP -MF "$(DEPDIR)/antlr3stringstream.Tpo" -c -o antlr3stringstream.lo `test -f 'src/antlr3stringstream.c' || echo '$(srcdir)/'`src/antlr3stringstream.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3stringstream.Tpo" "$(DEPDIR)/antlr3stringstream.Plo"; else rm -f "$(DEPDIR)/antlr3stringstream.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3stringstream.c' object='antlr3stringstream.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3stringstream.lo `test -f 'src/antlr3stringstream.c' || echo '$(srcdir)/'`src/antlr3stringstream.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3string.lo `test -f 'src/antlr3string.c' || echo '$(srcdir)/'`src/antlr3string.c antlr3tokenstream.lo: src/antlr3tokenstream.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3tokenstream.lo -MD -MP -MF "$(DEPDIR)/antlr3tokenstream.Tpo" -c -o antlr3tokenstream.lo `test -f 'src/antlr3tokenstream.c' || echo '$(srcdir)/'`src/antlr3tokenstream.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3tokenstream.Tpo" "$(DEPDIR)/antlr3tokenstream.Plo"; else rm -f "$(DEPDIR)/antlr3tokenstream.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3tokenstream.lo -MD -MP -MF $(DEPDIR)/antlr3tokenstream.Tpo -c -o antlr3tokenstream.lo `test -f 'src/antlr3tokenstream.c' || echo '$(srcdir)/'`src/antlr3tokenstream.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3tokenstream.Tpo $(DEPDIR)/antlr3tokenstream.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3tokenstream.c' object='antlr3tokenstream.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3tokenstream.lo `test -f 'src/antlr3tokenstream.c' || echo '$(srcdir)/'`src/antlr3tokenstream.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3tokenstream.lo `test -f 'src/antlr3tokenstream.c' || echo '$(srcdir)/'`src/antlr3tokenstream.c antlr3treeparser.lo: src/antlr3treeparser.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3treeparser.lo -MD -MP -MF "$(DEPDIR)/antlr3treeparser.Tpo" -c -o antlr3treeparser.lo `test -f 'src/antlr3treeparser.c' || echo '$(srcdir)/'`src/antlr3treeparser.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3treeparser.Tpo" "$(DEPDIR)/antlr3treeparser.Plo"; else rm -f "$(DEPDIR)/antlr3treeparser.Tpo"; exit 1; fi +@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3treeparser.lo -MD -MP -MF $(DEPDIR)/antlr3treeparser.Tpo -c -o antlr3treeparser.lo `test -f 'src/antlr3treeparser.c' || echo '$(srcdir)/'`src/antlr3treeparser.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/antlr3treeparser.Tpo $(DEPDIR)/antlr3treeparser.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3treeparser.c' object='antlr3treeparser.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3treeparser.lo `test -f 'src/antlr3treeparser.c' || echo '$(srcdir)/'`src/antlr3treeparser.c - -antlr3ucs2inputstream.lo: src/antlr3ucs2inputstream.c -@am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT antlr3ucs2inputstream.lo -MD -MP -MF "$(DEPDIR)/antlr3ucs2inputstream.Tpo" -c -o antlr3ucs2inputstream.lo `test -f 'src/antlr3ucs2inputstream.c' || echo '$(srcdir)/'`src/antlr3ucs2inputstream.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/antlr3ucs2inputstream.Tpo" "$(DEPDIR)/antlr3ucs2inputstream.Plo"; else rm -f "$(DEPDIR)/antlr3ucs2inputstream.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/antlr3ucs2inputstream.c' object='antlr3ucs2inputstream.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3ucs2inputstream.lo `test -f 'src/antlr3ucs2inputstream.c' || echo '$(srcdir)/'`src/antlr3ucs2inputstream.c +@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o antlr3treeparser.lo `test -f 'src/antlr3treeparser.c' || echo '$(srcdir)/'`src/antlr3treeparser.c mostlyclean-libtool: -rm -f *.lo @@ -602,109 +613,119 @@ -rm -rf .libs _libs distclean-libtool: - -rm -f libtool -uninstall-info-am: + -rm -f libtool config.lt install-includeHEADERS: $(include_HEADERS) @$(NORMAL_INSTALL) - test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)" - @list='$(include_HEADERS)'; for p in $$list; do \ + test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \ - $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ done uninstall-includeHEADERS: @$(NORMAL_UNINSTALL) - @list='$(include_HEADERS)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \ - rm -f "$(DESTDIR)$(includedir)/$$f"; \ - done + @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(includedir)" && rm -f $$files ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) antlr3config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) antlr3config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) antlr3config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ list='$(SOURCES) $(HEADERS) antlr3config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) - mkdir $(distdir) - $(mkdir_p) $(distdir)/include $(distdir)/vsrulefiles - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) @@ -713,6 +734,14 @@ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz + $(am__remove_distdir) + dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) @@ -736,13 +765,17 @@ distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac @@ -750,9 +783,11 @@ mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && cd $(distdir)/_build \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ @@ -774,13 +809,15 @@ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: - @cd $(distuninstallcheck_dir) \ + @$(am__cd) '$(distuninstallcheck_dir)' \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ @@ -802,7 +839,7 @@ all-am: Makefile $(LTLIBRARIES) $(HEADERS) antlr3config.h installdirs: for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \ - test -z "$$dir" || $(mkdir_p) "$$dir"; \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am @@ -824,6 +861,7 @@ distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -846,18 +884,38 @@ html: html-am +html-am: + info: info-am info-am: install-data-am: install-includeHEADERS +install-dvi: install-dvi-am + +install-dvi-am: + install-exec-am: install-libLTLIBRARIES +install-html: install-html-am + +install-html-am: + install-info: install-info-am +install-info-am: + install-man: +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -880,27 +938,31 @@ ps-am: -uninstall-am: uninstall-includeHEADERS uninstall-info-am \ - uninstall-libLTLIBRARIES +uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES + +.MAKE: all install-am install-strip .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \ clean-generic clean-libLTLIBRARIES clean-libtool ctags dist \ - dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \ - distcheck distclean distclean-compile distclean-generic \ - distclean-hdr distclean-libtool distclean-tags distcleancheck \ - distdir distuninstallcheck dvi dvi-am html html-am info \ - info-am install install-am install-data install-data-am \ - install-exec install-exec-am install-includeHEADERS \ - install-info install-info-am install-libLTLIBRARIES \ - install-man install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \ - uninstall-am uninstall-includeHEADERS uninstall-info-am \ + dist-all dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ \ + dist-xz dist-zip distcheck distclean distclean-compile \ + distclean-generic distclean-hdr distclean-libtool \ + distclean-tags distcleancheck distdir distuninstallcheck dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-includeHEADERS install-info install-info-am \ + install-libLTLIBRARIES install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-includeHEADERS \ uninstall-libLTLIBRARIES export OBJECT_MODE + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff -Nru libantlr3c-3.2/missing libantlr3c-3.4+dfsg/missing --- libantlr3c-3.2/missing 2009-12-11 22:55:09.000000000 +0000 +++ libantlr3c-3.4+dfsg/missing 2011-07-19 18:14:25.000000000 +0000 @@ -1,10 +1,10 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2005-06-08.21 +scriptversion=2009-04-28.21; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify @@ -18,9 +18,7 @@ # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -33,6 +31,8 @@ fi run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. @@ -44,7 +44,7 @@ msg="missing on your system" -case "$1" in +case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= @@ -77,6 +77,7 @@ aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c @@ -86,6 +87,9 @@ tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + Send bug reports to ." exit $? ;; @@ -103,15 +107,22 @@ esac +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect -# the program). -case "$1" in - lex|yacc) +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) # Not GNU programs, they don't have --version. ;; - tar) + tar*) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 @@ -135,7 +146,7 @@ # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. -case "$1" in +case $program in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if @@ -145,7 +156,7 @@ touch aclocal.m4 ;; - autoconf) + autoconf*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the @@ -154,7 +165,7 @@ touch configure ;; - autoheader) + autoheader*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want @@ -164,7 +175,7 @@ test -z "$files" && files="config.h" touch_files= for f in $files; do - case "$f" in + case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; @@ -184,7 +195,7 @@ while read f; do touch "$f"; done ;; - autom4te) + autom4te*) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the @@ -192,8 +203,8 @@ You can get \`$1' as part of \`Autoconf' from any GNU archive site." - file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else @@ -207,80 +218,78 @@ fi ;; - bison|yacc) + bison*|yacc*) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then + if test $# -ne 1; then eval LASTARG="\${$#}" - case "$LASTARG" in + case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi - if [ ! -f y.tab.h ]; then + if test ! -f y.tab.h; then echo >y.tab.h fi - if [ ! -f y.tab.c ]; then + if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; - lex|flex) + lex*|flex*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c - if [ $# -ne 1 ]; then + if test $# -ne 1; then eval LASTARG="\${$#}" - case "$LASTARG" in + case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi - if [ ! -f lex.yy.c ]; then + if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; - help2man) + help2man*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` - fi - if [ -f "$file" ]; then + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" - exit 1 + exit $? fi ;; - makeinfo) + makeinfo*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file @@ -289,11 +298,17 @@ DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi @@ -303,7 +318,7 @@ touch $file ;; - tar) + tar*) shift # We have already tried tar in the generic part. @@ -317,13 +332,13 @@ fi firstarg="$1" if shift; then - case "$firstarg" in + case $firstarg in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac - case "$firstarg" in + case $firstarg in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 @@ -356,5 +371,6 @@ # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: diff -Nru libantlr3c-3.2/src/antlr3baserecognizer.c libantlr3c-3.4+dfsg/src/antlr3baserecognizer.c --- libantlr3c-3.2/src/antlr3baserecognizer.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3baserecognizer.c 2011-06-22 22:32:16.000000000 +0000 @@ -720,6 +720,13 @@ static void reportError (pANTLR3_BASE_RECOGNIZER recognizer) { + // Invoke the debugger event if there is a debugger listening to us + // + if (recognizer->debugger != NULL) + { + recognizer->debugger->recognitionException(recognizer->debugger, recognizer->state->exception); + } + if (recognizer->state->errorRecovery == ANTLR3_TRUE) { // Already in error recovery so don't display another error while doing so @@ -1429,12 +1436,7 @@ pANTLR3_INT_STREAM is; void * matchedSymbol; - // Invoke the debugger event if there is a debugger listening to us - // - if (recognizer->debugger != NULL) - { - recognizer->debugger->recognitionException(recognizer->debugger, recognizer->state->exception); - } + switch (recognizer->type) { @@ -1486,8 +1488,6 @@ recognizer->debugger->beginResync(recognizer->debugger); } - recognizer->beginResync(recognizer); - // "delete" the extra token // recognizer->beginResync(recognizer); diff -Nru libantlr3c-3.2/src/antlr3collections.c libantlr3c-3.4+dfsg/src/antlr3collections.c --- libantlr3c-3.2/src/antlr3collections.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3collections.c 2011-06-22 22:32:16.000000000 +0000 @@ -1077,18 +1077,18 @@ ANTLR3_API void antlr3SetVectorApi (pANTLR3_VECTOR vector, ANTLR3_UINT32 sizeHint) { - ANTLR3_UINT32 initialSize; + ANTLR3_UINT32 initialSize; - // Allow vectors to be guessed by ourselves, so input size can be zero - // - if (sizeHint > ANTLR3_VECTOR_INTERNAL_SIZE) - { - initialSize = sizeHint; - } - else - { - initialSize = ANTLR3_VECTOR_INTERNAL_SIZE; - } + // Allow vectors to be guessed by ourselves, so input size can be zero + // + if (sizeHint > ANTLR3_VECTOR_INTERNAL_SIZE) + { + initialSize = sizeHint; + } + else + { + initialSize = ANTLR3_VECTOR_INTERNAL_SIZE; + } if (sizeHint > ANTLR3_VECTOR_INTERNAL_SIZE) { @@ -1099,33 +1099,34 @@ vector->elements = vector->internal; } - if (vector->elements == NULL) - { - ANTLR3_FREE(vector); - return; - } - - // Memory allocated successfully - // - vector->count = 0; // No entries yet of course - vector->elementsSize = initialSize; // Available entries - - // Now we can install the API - // - vector->add = antlr3VectorAdd; - vector->del = antlr3VectorDel; - vector->get = antlr3VectorGet; - vector->free = antlr3VectorFree; - vector->set = antlr3VectorSet; - vector->remove = antrl3VectorRemove; - vector->clear = antlr3VectorClear; - vector->size = antlr3VectorSize; + if (vector->elements == NULL) + { + ANTLR3_FREE(vector); + return; + } + + // Memory allocated successfully + // + vector->count = 0; // No entries yet of course + vector->elementsSize = initialSize; // Available entries + + // Now we can install the API + // + vector->add = antlr3VectorAdd; + vector->del = antlr3VectorDel; + vector->get = antlr3VectorGet; + vector->free = antlr3VectorFree; + vector->set = antlr3VectorSet; + vector->remove = antrl3VectorRemove; + vector->clear = antlr3VectorClear; + vector->size = antlr3VectorSize; vector->swap = antlr3VectorSwap; - // Assume that this is not a factory made vector - // - vector->factoryMade = ANTLR3_FALSE; + // Assume that this is not a factory made vector + // + vector->factoryMade = ANTLR3_FALSE; } + // Clear the entries in a vector. // Clearing the vector leaves its capacity the same but // it walks the entries first to see if any of them diff -Nru libantlr3c-3.2/src/antlr3commontoken.c libantlr3c-3.4+dfsg/src/antlr3commontoken.c --- libantlr3c-3.2/src/antlr3commontoken.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3commontoken.c 2011-06-28 20:41:01.000000000 +0000 @@ -61,6 +61,7 @@ static void factoryClose (pANTLR3_TOKEN_FACTORY factory); static pANTLR3_COMMON_TOKEN newToken (void); static void setInputStream (pANTLR3_TOKEN_FACTORY factory, pANTLR3_INPUT_STREAM input); +static void factoryReset (pANTLR3_TOKEN_FACTORY factory); /* Internal management functions */ @@ -68,7 +69,6 @@ static pANTLR3_COMMON_TOKEN newPoolToken (pANTLR3_TOKEN_FACTORY factory); - ANTLR3_API pANTLR3_COMMON_TOKEN antlr3CommonTokenNew(ANTLR3_UINT32 ttype) { @@ -104,14 +104,16 @@ /* Install factory API */ - factory->newToken = newPoolToken; - factory->close = factoryClose; + factory->newToken = newPoolToken; + factory->close = factoryClose; factory->setInputStream = setInputStream; + factory->reset = factoryReset; /* Allocate the initial pool */ factory->thisPool = -1; factory->pools = NULL; + factory->maxPool = -1; newPool(factory); /* Factory space is good, we now want to initialize our cheating token @@ -153,18 +155,28 @@ */ factory->thisPool++; - /* Ensure we have enough pointers allocated - */ - factory->pools = (pANTLR3_COMMON_TOKEN *) - ANTLR3_REALLOC( (void *)factory->pools, /* Current pools pointer (starts at NULL) */ - (ANTLR3_UINT32)((factory->thisPool + 1) * sizeof(pANTLR3_COMMON_TOKEN *)) /* Memory for new pool pointers */ - ); - - /* Allocate a new pool for the factory - */ - factory->pools[factory->thisPool] = - (pANTLR3_COMMON_TOKEN) - ANTLR3_MALLOC((size_t)(sizeof(ANTLR3_COMMON_TOKEN) * ANTLR3_FACTORY_POOL_SIZE)); + // If we were reusing this token factory then we may already have a pool + // allocated. If we exceeded the max avaible then we must allocate a new + // one. + if (factory->thisPool > factory->maxPool) + { + /* Ensure we have enough pointers allocated + */ + factory->pools = (pANTLR3_COMMON_TOKEN *) + ANTLR3_REALLOC( (void *)factory->pools, /* Current pools pointer (starts at NULL) */ + (ANTLR3_UINT32)((factory->thisPool + 1) * sizeof(pANTLR3_COMMON_TOKEN *)) /* Memory for new pool pointers */ + ); + + /* Allocate a new pool for the factory + */ + factory->pools[factory->thisPool] = + (pANTLR3_COMMON_TOKEN) + ANTLR3_CALLOC(1, (size_t)(sizeof(ANTLR3_COMMON_TOKEN) * ANTLR3_FACTORY_POOL_SIZE)); + + // We now have a new pool and can track it as the maximum we have created so far + // + factory->maxPool = factory->thisPool; + } /* Reset the counters */ @@ -197,14 +209,19 @@ factory->nextToken++; /* We have our token pointer now, so we can initialize it to the predefined model. + * We only need do this though if the token is not already initialized, we just check + * an api function pointer for this as they are allocated via calloc. */ - antlr3SetTokenAPI(token); + if (token->setStartIndex == NULL) + { + antlr3SetTokenAPI(token); - /* It is factory made, and we need to copy the string factory pointer - */ - token->factoryMade = ANTLR3_TRUE; - token->strFactory = factory->input == NULL ? NULL : factory->input->strFactory; - token->input = factory->input; + // It is factory made, and we need to copy the string factory pointer + // + token->factoryMade = ANTLR3_TRUE; + token->strFactory = factory->input == NULL ? NULL : factory->input->strFactory; + token->input = factory->input; + } /* And we are done */ @@ -212,6 +229,16 @@ } static void +factoryReset (pANTLR3_TOKEN_FACTORY factory) +{ + // Just start again with pool #0 when we are + // called. + // + factory->thisPool = -1; + newPool(factory); +} + +static void factoryClose (pANTLR3_TOKEN_FACTORY factory) { pANTLR3_COMMON_TOKEN pool; @@ -280,7 +307,7 @@ /* Allocate memory for this */ - token = (pANTLR3_COMMON_TOKEN) ANTLR3_MALLOC((size_t)(sizeof(ANTLR3_COMMON_TOKEN))); + token = (pANTLR3_COMMON_TOKEN) ANTLR3_CALLOC(1, (size_t)(sizeof(ANTLR3_COMMON_TOKEN))); if (token == NULL) { @@ -298,44 +325,25 @@ ANTLR3_API void antlr3SetTokenAPI(pANTLR3_COMMON_TOKEN token) { - token->getText = getText; - token->setText = setText; - token->setText8 = setText8; - token->getType = getType; - token->setType = setType; - token->getLine = getLine; - token->setLine = setLine; - token->setLine = setLine; + token->getText = getText; + token->setText = setText; + token->setText8 = setText8; + token->getType = getType; + token->setType = setType; + token->getLine = getLine; + token->setLine = setLine; + token->setLine = setLine; token->getCharPositionInLine = getCharPositionInLine; token->setCharPositionInLine = setCharPositionInLine; - token->getChannel = getChannel; - token->setChannel = setChannel; - token->getTokenIndex = getTokenIndex; - token->setTokenIndex = setTokenIndex; - token->getStartIndex = getStartIndex; - token->setStartIndex = setStartIndex; - token->getStopIndex = getStopIndex; - token->setStopIndex = setStopIndex; - token->toString = toString; - - // Set defaults - // - token->setCharPositionInLine(token, -1); - - token->custom = NULL; - token->freeCustom = NULL; - token->type = ANTLR3_TOKEN_INVALID; - token->textState = ANTLR3_TEXT_NONE; - token->start = 0; - token->stop = 0; - token->channel = ANTLR3_TOKEN_DEFAULT_CHANNEL; - token->line = 0; - token->index = 0; - token->input = NULL; - token->user1 = 0; - token->user2 = 0; - token->user3 = 0; - token->custom = NULL; + token->getChannel = getChannel; + token->setChannel = setChannel; + token->getTokenIndex = getTokenIndex; + token->setTokenIndex = setTokenIndex; + token->getStartIndex = getStartIndex; + token->setStartIndex = setStartIndex; + token->getStopIndex = getStopIndex; + token->setStopIndex = setStopIndex; + token->toString = toString; return; } @@ -378,8 +386,9 @@ // if (token->type == ANTLR3_TOKEN_EOF) { - token->tokText.text = token->strFactory->newStr8(token->strFactory, (pANTLR3_UINT8)""); - token->textState = ANTLR3_TEXT_STRING; + token->tokText.text = token->strFactory->newStr8(token->strFactory, (pANTLR3_UINT8)""); + token->textState = ANTLR3_TEXT_STRING; + token->tokText.text->factory = token->strFactory; return token->tokText.text; } @@ -536,7 +545,7 @@ if (text->factory == NULL) { - return text; // This usall ymeans it is the EOF token + return text; // This usally means it is the EOF token } /* A new empty string to assemble all the stuff in @@ -561,9 +570,9 @@ if (token->getChannel(token) > ANTLR3_TOKEN_DEFAULT_CHANNEL) { - outtext->append8(outtext, "(channel = "); - outtext->addi (outtext, (ANTLR3_INT32)token->getChannel(token)); - outtext->append8(outtext, ") "); + outtext->append8(outtext, "(channel = "); + outtext->addi (outtext, (ANTLR3_INT32)token->getChannel(token)); + outtext->append8(outtext, ") "); } outtext->append8(outtext, "Line: "); diff -Nru libantlr3c-3.2/src/antlr3commontree.c libantlr3c-3.4+dfsg/src/antlr3commontree.c --- libantlr3c-3.2/src/antlr3commontree.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3commontree.c 2011-06-28 20:41:01.000000000 +0000 @@ -202,6 +202,7 @@ // tree->baseTree.super = tree; + // And we are done // return &(tree->baseTree); @@ -299,7 +300,7 @@ // Common tree overrides - tree->baseTree.isNilNode = isNilNode; + tree->baseTree.isNilNode = isNilNode; tree->baseTree.toString = toString; tree->baseTree.dupNode = (void *(*)(pANTLR3_BASE_TREE))(dupNode); tree->baseTree.getLine = getLine; @@ -314,8 +315,9 @@ tree->baseTree.getChildIndex = getChildIndex; tree->baseTree.createChildrenList = createChildrenList; tree->baseTree.reuse = reuse; - tree->baseTree.free = NULL; // Factory trees have no free function - + tree->baseTree.free = NULL; // Factory trees have no free function + tree->baseTree.u = NULL; // Initialize user pointer + tree->baseTree.children = NULL; tree->token = NULL; // No token as yet @@ -335,7 +337,7 @@ antlr3CommonTreeNew() { pANTLR3_COMMON_TREE tree; - tree = ANTLR3_MALLOC(sizeof(ANTLR3_COMMON_TREE)); + tree = ANTLR3_CALLOC(1, sizeof(ANTLR3_COMMON_TREE)); if (tree == NULL) { diff -Nru libantlr3c-3.2/src/antlr3convertutf.c libantlr3c-3.4+dfsg/src/antlr3convertutf.c --- libantlr3c-3.2/src/antlr3convertutf.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3convertutf.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,542 +0,0 @@ -/* - * Copyright 2001-2004 Unicode, Inc. - * - * Disclaimer - * - * This source code is provided as is by Unicode, Inc. No claims are - * made as to fitness for any particular purpose. No warranties of any - * kind are expressed or implied. The recipient agrees to determine - * applicability of information provided. If this file has been - * purchased on magnetic or optical media from Unicode, Inc., the - * sole remedy for any claim will be exchange of defective media - * within 90 days of receipt. - * - * Limitations on Rights to Redistribute This Code - * - * Unicode, Inc. hereby grants the right to freely use the information - * supplied in this file in the creation of products supporting the - * Unicode Standard, and to make copies of this file in any form - * for internal or external distribution as long as this notice - * remains attached. - */ - -/* --------------------------------------------------------------------- - - Conversions between UTF32, UTF-16, and UTF-8. Source code file. - Author: Mark E. Davis, 1994. - Rev History: Rick McGowan, fixes & updates May 2001. - Sept 2001: fixed const & error conditions per - mods suggested by S. Parent & A. Lillich. - June 2002: Tim Dodd added detection and handling of incomplete - source sequences, enhanced error detection, added casts - to eliminate compiler warnings. - July 2003: slight mods to back out aggressive FFFE detection. - Jan 2004: updated switches in from-UTF8 conversions. - Oct 2004: updated to use UNI_MAX_LEGAL_UTF32 in UTF-32 conversions. - - See the header file "ConvertUTF.h" for complete documentation. - ------------------------------------------------------------------------- */ - - -#include "antlr3convertutf.h" - -#ifdef CVTUTF_DEBUG -#include -#endif - -static const int halfShift = 10; /* used for shifting by 10 bits */ - -static const UTF32 halfBase = 0x0010000UL; -static const UTF32 halfMask = 0x3FFUL; - -#define UNI_SUR_HIGH_START (UTF32)0xD800 -#define UNI_SUR_HIGH_END (UTF32)0xDBFF -#define UNI_SUR_LOW_START (UTF32)0xDC00 -#define UNI_SUR_LOW_END (UTF32)0xDFFF -#define false 0 -#define true 1 - -/* --------------------------------------------------------------------- */ - -ConversionResult ConvertUTF32toUTF16 ( - const UTF32** sourceStart, const UTF32* sourceEnd, - UTF16** targetStart, UTF16* targetEnd, ConversionFlags flags) { - ConversionResult result = conversionOK; - const UTF32* source = *sourceStart; - UTF16* target = *targetStart; - while (source < sourceEnd) { - UTF32 ch; - if (target >= targetEnd) { - result = targetExhausted; break; - } - ch = *source++; - if (ch <= UNI_MAX_BMP) { /* Target is a character <= 0xFFFF */ - /* UTF-16 surrogate values are illegal in UTF-32; 0xffff or 0xfffe are both reserved values */ - if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END) { - if (flags == strictConversion) { - --source; /* return to the illegal value itself */ - result = sourceIllegal; - break; - } else { - *target++ = UNI_REPLACEMENT_CHAR; - } - } else { - *target++ = (UTF16)ch; /* normal case */ - } - } else if (ch > UNI_MAX_LEGAL_UTF32) { - if (flags == strictConversion) { - result = sourceIllegal; - } else { - *target++ = UNI_REPLACEMENT_CHAR; - } - } else { - /* target is a character in range 0xFFFF - 0x10FFFF. */ - if (target + 1 >= targetEnd) { - --source; /* Back up source pointer! */ - result = targetExhausted; break; - } - ch -= halfBase; - *target++ = (UTF16)((ch >> halfShift) + UNI_SUR_HIGH_START); - *target++ = (UTF16)((ch & halfMask) + UNI_SUR_LOW_START); - } - } - *sourceStart = source; - *targetStart = target; - return result; -} - -/* --------------------------------------------------------------------- */ - -ConversionResult ConvertUTF16toUTF32 ( - const UTF16** sourceStart, const UTF16* sourceEnd, - UTF32** targetStart, UTF32* targetEnd, ConversionFlags flags) { - ConversionResult result = conversionOK; - const UTF16* source = *sourceStart; - UTF32* target = *targetStart; - UTF32 ch, ch2; - while (source < sourceEnd) { - const UTF16* oldSource = source; /* In case we have to back up because of target overflow. */ - ch = *source++; - /* If we have a surrogate pair, convert to UTF32 first. */ - if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) { - /* If the 16 bits following the high surrogate are in the source buffer... */ - if (source < sourceEnd) { - ch2 = *source; - /* If it's a low surrogate, convert to UTF32. */ - if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) { - ch = ((ch - UNI_SUR_HIGH_START) << halfShift) - + (ch2 - UNI_SUR_LOW_START) + halfBase; - ++source; - } else if (flags == strictConversion) { /* it's an unpaired high surrogate */ - --source; /* return to the illegal value itself */ - result = sourceIllegal; - break; - } - } else { /* We don't have the 16 bits following the high surrogate. */ - --source; /* return to the high surrogate */ - result = sourceExhausted; - break; - } - } else if (flags == strictConversion) { - /* UTF-16 surrogate values are illegal in UTF-32 */ - if (ch >= UNI_SUR_LOW_START && ch <= UNI_SUR_LOW_END) { - --source; /* return to the illegal value itself */ - result = sourceIllegal; - break; - } - } - if (target >= targetEnd) { - source = oldSource; /* Back up source pointer! */ - result = targetExhausted; break; - } - *target++ = ch; - } - *sourceStart = source; - *targetStart = target; -#ifdef CVTUTF_DEBUG -if (result == sourceIllegal) { - ANTLR3_FPRINTF(stderr, "ConvertUTF16toUTF32 illegal seq 0x%04x,%04x\n", ch, ch2); - fflush(stderr); -} -#endif - return result; -} - -/* --------------------------------------------------------------------- */ - -/* - * Index into the table below with the first byte of a UTF-8 sequence to - * get the number of trailing bytes that are supposed to follow it. - * Note that *legal* UTF-8 values can't have 4 or 5-bytes. The table is - * left as-is for anyone who may want to do such conversion, which was - * allowed in earlier algorithms. - */ -static const char trailingBytesForUTF8[256] = { - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, - 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, - 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, 3,3,3,3,3,3,3,3,4,4,4,4,5,5,5,5 -}; - -/* - * Magic values subtracted from a buffer value during UTF8 conversion. - * This table contains as many values as there might be trailing bytes - * in a UTF-8 sequence. - */ -static const UTF32 offsetsFromUTF8[6] = { 0x00000000UL, 0x00003080UL, 0x000E2080UL, - 0x03C82080UL, 0xFA082080UL, 0x82082080UL }; - -/* - * Once the bits are split out into bytes of UTF-8, this is a mask OR-ed - * into the first byte, depending on how many bytes follow. There are - * as many entries in this table as there are UTF-8 sequence types. - * (I.e., one byte sequence, two byte... etc.). Remember that sequencs - * for *legal* UTF-8 will be 4 or fewer bytes total. - */ -static const UTF8 firstByteMark[7] = { 0x00, 0x00, 0xC0, 0xE0, 0xF0, 0xF8, 0xFC }; - -/* --------------------------------------------------------------------- */ - -/* The interface converts a whole buffer to avoid function-call overhead. - * Constants have been gathered. Loops & conditionals have been removed as - * much as possible for efficiency, in favor of drop-through switches. - * (See "Note A" at the bottom of the file for equivalent code.) - * If your compiler supports it, the "isLegalUTF8" call can be turned - * into an inline function. - */ - -/* --------------------------------------------------------------------- */ - -ConversionResult ConvertUTF16toUTF8 ( - const UTF16** sourceStart, const UTF16* sourceEnd, - UTF8** targetStart, UTF8* targetEnd, ConversionFlags flags) { - ConversionResult result = conversionOK; - const UTF16* source = *sourceStart; - UTF8* target = *targetStart; - while (source < sourceEnd) { - UTF32 ch; - unsigned short bytesToWrite = 0; - const UTF32 byteMask = 0xBF; - const UTF32 byteMark = 0x80; - const UTF16* oldSource = source; /* In case we have to back up because of target overflow. */ - ch = *source++; - /* If we have a surrogate pair, convert to UTF32 first. */ - if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) { - /* If the 16 bits following the high surrogate are in the source buffer... */ - if (source < sourceEnd) { - UTF32 ch2 = *source; - /* If it's a low surrogate, convert to UTF32. */ - if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) { - ch = ((ch - UNI_SUR_HIGH_START) << halfShift) - + (ch2 - UNI_SUR_LOW_START) + halfBase; - ++source; - } else if (flags == strictConversion) { /* it's an unpaired high surrogate */ - --source; /* return to the illegal value itself */ - result = sourceIllegal; - break; - } - } else { /* We don't have the 16 bits following the high surrogate. */ - --source; /* return to the high surrogate */ - result = sourceExhausted; - break; - } - } else if (flags == strictConversion) { - /* UTF-16 surrogate values are illegal in UTF-32 */ - if (ch >= UNI_SUR_LOW_START && ch <= UNI_SUR_LOW_END) { - --source; /* return to the illegal value itself */ - result = sourceIllegal; - break; - } - } - /* Figure out how many bytes the result will require */ - if (ch < (UTF32)0x80) { bytesToWrite = 1; - } else if (ch < (UTF32)0x800) { bytesToWrite = 2; - } else if (ch < (UTF32)0x10000) { bytesToWrite = 3; - } else if (ch < (UTF32)0x110000) { bytesToWrite = 4; - } else { bytesToWrite = 3; - ch = UNI_REPLACEMENT_CHAR; - } - - target += bytesToWrite; - if (target > targetEnd) { - source = oldSource; /* Back up source pointer! */ - target -= bytesToWrite; result = targetExhausted; break; - } - switch (bytesToWrite) { /* note: everything falls through. */ - case 4: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6; - case 3: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6; - case 2: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6; - case 1: *--target = (UTF8)(ch | firstByteMark[bytesToWrite]); - } - target += bytesToWrite; - } - *sourceStart = source; - *targetStart = target; - return result; -} - -/* --------------------------------------------------------------------- */ - -/* - * Utility routine to tell whether a sequence of bytes is legal UTF-8. - * This must be called with the length pre-determined by the first byte. - * If not calling this from ConvertUTF8to*, then the length can be set by: - * length = trailingBytesForUTF8[*source]+1; - * and the sequence is illegal right away if there aren't that many bytes - * available. - * If presented with a length > 4, this returns false. The Unicode - * definition of UTF-8 goes up to 4-byte sequences. - */ - -static ANTLR3_BOOLEAN -isLegalUTF8(const UTF8 *source, int length) { - UTF8 a; - const UTF8 *srcptr = source+length; - switch (length) { - default: return false; - /* Everything else falls through when "true"... */ - case 4: if ((a = (*--srcptr)) < 0x80 || a > 0xBF) return false; - case 3: if ((a = (*--srcptr)) < 0x80 || a > 0xBF) return false; - case 2: if ((a = (*--srcptr)) > 0xBF) return false; - - switch (*source) { - /* no fall-through in this inner switch */ - case 0xE0: if (a < 0xA0) return false; break; - case 0xED: if (a > 0x9F) return false; break; - case 0xF0: if (a < 0x90) return false; break; - case 0xF4: if (a > 0x8F) return false; break; - default: if (a < 0x80) return false; - } - - case 1: if (*source >= 0x80 && *source < 0xC2) return false; - } - if (*source > 0xF4) return false; - return true; -} - -/* --------------------------------------------------------------------- */ - -/* - * Exported function to return whether a UTF-8 sequence is legal or not. - * This is not used here; it's just exported. - */ -ANTLR3_BOOLEAN -isLegalUTF8Sequence(const UTF8 *source, const UTF8 *sourceEnd) { - int length = trailingBytesForUTF8[*source]+1; - if (source+length > sourceEnd) { - return false; - } - return isLegalUTF8(source, length); -} - -/* --------------------------------------------------------------------- */ - -ConversionResult ConvertUTF8toUTF16 ( - const UTF8** sourceStart, const UTF8* sourceEnd, - UTF16** targetStart, UTF16* targetEnd, ConversionFlags flags) { - ConversionResult result = conversionOK; - const UTF8* source = *sourceStart; - UTF16* target = *targetStart; - while (source < sourceEnd) { - UTF32 ch = 0; - unsigned short extraBytesToRead = trailingBytesForUTF8[*source]; - if (source + extraBytesToRead >= sourceEnd) { - result = sourceExhausted; break; - } - /* Do this check whether lenient or strict */ - if (! isLegalUTF8(source, extraBytesToRead+1)) { - result = sourceIllegal; - break; - } - /* - * The cases all fall through. See "Note A" below. - */ - switch (extraBytesToRead) { - case 5: ch += *source++; ch <<= 6; /* remember, illegal UTF-8 */ - case 4: ch += *source++; ch <<= 6; /* remember, illegal UTF-8 */ - case 3: ch += *source++; ch <<= 6; - case 2: ch += *source++; ch <<= 6; - case 1: ch += *source++; ch <<= 6; - case 0: ch += *source++; - } - ch -= offsetsFromUTF8[extraBytesToRead]; - - if (target >= targetEnd) { - source -= (extraBytesToRead+1); /* Back up source pointer! */ - result = targetExhausted; break; - } - if (ch <= UNI_MAX_BMP) { /* Target is a character <= 0xFFFF */ - /* UTF-16 surrogate values are illegal in UTF-32 */ - if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END) { - if (flags == strictConversion) { - source -= (extraBytesToRead+1); /* return to the illegal value itself */ - result = sourceIllegal; - break; - } else { - *target++ = UNI_REPLACEMENT_CHAR; - } - } else { - *target++ = (UTF16)ch; /* normal case */ - } - } else if (ch > UNI_MAX_UTF16) { - if (flags == strictConversion) { - result = sourceIllegal; - source -= (extraBytesToRead+1); /* return to the start */ - break; /* Bail out; shouldn't continue */ - } else { - *target++ = UNI_REPLACEMENT_CHAR; - } - } else { - /* target is a character in range 0xFFFF - 0x10FFFF. */ - if (target + 1 >= targetEnd) { - source -= (extraBytesToRead+1); /* Back up source pointer! */ - result = targetExhausted; break; - } - ch -= halfBase; - *target++ = (UTF16)((ch >> halfShift) + UNI_SUR_HIGH_START); - *target++ = (UTF16)((ch & halfMask) + UNI_SUR_LOW_START); - } - } - *sourceStart = source; - *targetStart = target; - return result; -} - -/* --------------------------------------------------------------------- */ - -ConversionResult ConvertUTF32toUTF8 ( - const UTF32** sourceStart, const UTF32* sourceEnd, - UTF8** targetStart, UTF8* targetEnd, ConversionFlags flags) { - ConversionResult result = conversionOK; - const UTF32* source = *sourceStart; - UTF8* target = *targetStart; - while (source < sourceEnd) { - UTF32 ch; - unsigned short bytesToWrite = 0; - const UTF32 byteMask = 0xBF; - const UTF32 byteMark = 0x80; - ch = *source++; - if (flags == strictConversion ) { - /* UTF-16 surrogate values are illegal in UTF-32 */ - if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END) { - --source; /* return to the illegal value itself */ - result = sourceIllegal; - break; - } - } - /* - * Figure out how many bytes the result will require. Turn any - * illegally large UTF32 things (> Plane 17) into replacement chars. - */ - if (ch < (UTF32)0x80) { bytesToWrite = 1; - } else if (ch < (UTF32)0x800) { bytesToWrite = 2; - } else if (ch < (UTF32)0x10000) { bytesToWrite = 3; - } else if (ch <= UNI_MAX_LEGAL_UTF32) { bytesToWrite = 4; - } else { bytesToWrite = 3; - ch = UNI_REPLACEMENT_CHAR; - result = sourceIllegal; - } - - target += bytesToWrite; - if (target > targetEnd) { - --source; /* Back up source pointer! */ - target -= bytesToWrite; result = targetExhausted; break; - } - switch (bytesToWrite) { /* note: everything falls through. */ - case 4: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6; - case 3: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6; - case 2: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6; - case 1: *--target = (UTF8) (ch | firstByteMark[bytesToWrite]); - } - target += bytesToWrite; - } - *sourceStart = source; - *targetStart = target; - return result; -} - -/* --------------------------------------------------------------------- */ - -ConversionResult ConvertUTF8toUTF32 ( - const UTF8** sourceStart, const UTF8* sourceEnd, - UTF32** targetStart, UTF32* targetEnd, ConversionFlags flags) { - ConversionResult result = conversionOK; - const UTF8* source = *sourceStart; - UTF32* target = *targetStart; - while (source < sourceEnd) { - UTF32 ch = 0; - unsigned short extraBytesToRead = trailingBytesForUTF8[*source]; - if (source + extraBytesToRead >= sourceEnd) { - result = sourceExhausted; break; - } - /* Do this check whether lenient or strict */ - if (! isLegalUTF8(source, extraBytesToRead+1)) { - result = sourceIllegal; - break; - } - /* - * The cases all fall through. See "Note A" below. - */ - switch (extraBytesToRead) { - case 5: ch += *source++; ch <<= 6; - case 4: ch += *source++; ch <<= 6; - case 3: ch += *source++; ch <<= 6; - case 2: ch += *source++; ch <<= 6; - case 1: ch += *source++; ch <<= 6; - case 0: ch += *source++; - } - ch -= offsetsFromUTF8[extraBytesToRead]; - - if (target >= targetEnd) { - source -= (extraBytesToRead+1); /* Back up the source pointer! */ - result = targetExhausted; break; - } - if (ch <= UNI_MAX_LEGAL_UTF32) { - /* - * UTF-16 surrogate values are illegal in UTF-32, and anything - * over Plane 17 (> 0x10FFFF) is illegal. - */ - if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END) { - if (flags == strictConversion) { - source -= (extraBytesToRead+1); /* return to the illegal value itself */ - result = sourceIllegal; - break; - } else { - *target++ = UNI_REPLACEMENT_CHAR; - } - } else { - *target++ = ch; - } - } else { /* i.e., ch > UNI_MAX_LEGAL_UTF32 */ - result = sourceIllegal; - *target++ = UNI_REPLACEMENT_CHAR; - } - } - *sourceStart = source; - *targetStart = target; - return result; -} - -/* --------------------------------------------------------------------- - - Note A. - The fall-through switches in UTF-8 reading code save a - temp variable, some decrements & conditionals. The switches - are equivalent to the following loop: - { - int tmpBytesToRead = extraBytesToRead+1; - do { - ch += *source++; - --tmpBytesToRead; - if (tmpBytesToRead) ch <<= 6; - } while (tmpBytesToRead > 0); - } - In UTF-8 writing code, the switches on "bytesToWrite" are - similarly unrolled loops. - - --------------------------------------------------------------------- */ diff -Nru libantlr3c-3.2/src/antlr3debughandlers.c libantlr3c-3.4+dfsg/src/antlr3debughandlers.c --- libantlr3c-3.2/src/antlr3debughandlers.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3debughandlers.c 2011-06-22 22:32:16.000000000 +0000 @@ -369,7 +369,7 @@ // strings lead in with a " // - buffer->append(buffer, " \""); + buffer->append(buffer, "\t\""); if (text == NULL) { @@ -436,13 +436,13 @@ // uses 32 bits. // delboy->tokenString->addi(delboy->tokenString, (ANTLR3_INT32)(t->getTokenIndex(t))); - delboy->tokenString->addc(delboy->tokenString, ' '); + delboy->tokenString->addc(delboy->tokenString, '\t'); delboy->tokenString->addi(delboy->tokenString, (ANTLR3_INT32)(t->getType(t))); - delboy->tokenString->addc(delboy->tokenString, ' '); + delboy->tokenString->addc(delboy->tokenString, '\t'); delboy->tokenString->addi(delboy->tokenString, (ANTLR3_INT32)(t->getChannel(t))); - delboy->tokenString->addc(delboy->tokenString, ' '); + delboy->tokenString->addc(delboy->tokenString, '\t'); delboy->tokenString->addi(delboy->tokenString, (ANTLR3_INT32)(t->getLine(t))); - delboy->tokenString->addc(delboy->tokenString, ' '); + delboy->tokenString->addc(delboy->tokenString, '\t'); delboy->tokenString->addi(delboy->tokenString, (ANTLR3_INT32)(t->getCharPositionInLine(t))); // Now send the text that the token represents. @@ -491,12 +491,12 @@ // Now we serialize the elements of the node.Note that the debugger only // uses 32 bits. // - delboy->tokenString->addc(delboy->tokenString, ' '); + delboy->tokenString->addc(delboy->tokenString, '\t'); // Adaptor ID // delboy->tokenString->addi(delboy->tokenString, delboy->adaptor->getUniqueID(delboy->adaptor, node)); - delboy->tokenString->addc(delboy->tokenString, ' '); + delboy->tokenString->addc(delboy->tokenString, '\t'); // Type of the current token (which may be imaginary) // @@ -506,7 +506,7 @@ // token = delboy->adaptor->getToken(delboy->adaptor, node); - delboy->tokenString->addc(delboy->tokenString, ' '); + delboy->tokenString->addc(delboy->tokenString, '\t'); if (token != NULL) { // Real token @@ -520,13 +520,13 @@ // Imaginary tokens have no location // delboy->tokenString->addi(delboy->tokenString, -1); - delboy->tokenString->addc(delboy->tokenString, ' '); + delboy->tokenString->addc(delboy->tokenString, '\t'); delboy->tokenString->addi(delboy->tokenString, -1); } // Start Index of the node // - delboy->tokenString->addc(delboy->tokenString, ' '); + delboy->tokenString->addc(delboy->tokenString, '\t'); delboy->tokenString->addi(delboy->tokenString, (ANTLR3_UINT32)(delboy->adaptor->getTokenStartIndex(delboy->adaptor, node))); // Now send the text that the node represents. @@ -551,7 +551,7 @@ // Create the message (speed is not of the essence) // - sprintf(buffer, "enterRule %s %s\n", grammarFileName, ruleName); + sprintf(buffer, "enterRule\t%s\t%s\n", grammarFileName, ruleName); transmit(delboy, buffer); } @@ -562,7 +562,7 @@ // Create the message (speed is not of the essence) // - sprintf(buffer, "enterAlt %d\n", alt); + sprintf(buffer, "enterAlt\t%d\n", alt); transmit(delboy, buffer); } @@ -573,7 +573,7 @@ // Create the message (speed is not of the essence) // - sprintf(buffer, "enterRule %s %s\n", grammarFileName, ruleName); + sprintf(buffer, "exitRule\t%s\t%s\n", grammarFileName, ruleName); transmit(delboy, buffer); } @@ -584,7 +584,7 @@ // Create the message (speed is not of the essence) // - sprintf(buffer, "enterSubRule %d\n", decisionNumber); + sprintf(buffer, "enterSubRule\t%d\n", decisionNumber); transmit(delboy, buffer); } @@ -595,7 +595,7 @@ // Create the message (speed is not of the essence) // - sprintf(buffer, "exitSubRule %d\n", decisionNumber); + sprintf(buffer, "exitSubRule\t%d\n", decisionNumber); transmit(delboy, buffer); } @@ -606,7 +606,7 @@ // Create the message (speed is not of the essence) // - sprintf(buffer, "enterDecision %d\n", decisionNumber); + sprintf(buffer, "enterDecision\t%d\n", decisionNumber); transmit(delboy, buffer); } @@ -618,7 +618,7 @@ // Create the message (speed is not of the essence) // - sprintf(buffer, "exitDecision %d\n", decisionNumber); + sprintf(buffer, "exitDecision\t%d\n", decisionNumber); transmit(delboy, buffer); } @@ -633,7 +633,7 @@ // Insert the debug event indicator // - msg->insert8(msg, 0, "consumeToken "); + msg->insert8(msg, 0, "consumeToken\t"); msg->addc(msg, '\n'); @@ -653,7 +653,7 @@ // Insert the debug event indicator // - msg->insert8(msg, 0, "consumeHiddenToken "); + msg->insert8(msg, 0, "consumeHiddenToken\t"); msg->addc(msg, '\n'); @@ -677,12 +677,12 @@ // Insert the index parameter // - msg->insert8(msg, 0, " "); + msg->insert8(msg, 0, "\t"); msg->inserti(msg, 0, i); // Insert the debug event indicator // - msg->insert8(msg, 0, "LT "); + msg->insert8(msg, 0, "LT\t"); msg->addc(msg, '\n'); @@ -697,7 +697,7 @@ { char buffer[128]; - sprintf(buffer, "mark %d\n", (ANTLR3_UINT32)(marker & 0xFFFFFFFF)); + sprintf(buffer, "mark\t%d\n", (ANTLR3_UINT32)(marker & 0xFFFFFFFF)); // Transmit the message and wait for ack // @@ -709,7 +709,7 @@ { char buffer[128]; - sprintf(buffer, "rewind %d\n", (ANTLR3_UINT32)(marker & 0xFFFFFFFF)); + sprintf(buffer, "rewind\t%d\n", (ANTLR3_UINT32)(marker & 0xFFFFFFFF)); // Transmit the message and wait for ack // @@ -728,7 +728,7 @@ { char buffer[128]; - sprintf(buffer, "beginBacktrack %d\n", (ANTLR3_UINT32)(level & 0xFFFFFFFF)); + sprintf(buffer, "beginBacktrack\t%d\n", (ANTLR3_UINT32)(level & 0xFFFFFFFF)); // Transmit the message and wait for ack // @@ -740,7 +740,7 @@ { char buffer[128]; - sprintf(buffer, "endBacktrack %d %d\n", level, successful); + sprintf(buffer, "endBacktrack\t%d\t%d\n", level, successful); // Transmit the message and wait for ack // @@ -752,7 +752,7 @@ { char buffer[128]; - sprintf(buffer, "location %d %d\n", line, pos); + sprintf(buffer, "location\t%d\t%d\n", line, pos); // Transmit the message and wait for ack // @@ -764,7 +764,7 @@ { char buffer[256]; - sprintf(buffer, "exception %s %d %d %d\n", (char *)(e->name), (ANTLR3_INT32)(e->index), e->line, e->charPositionInLine); + sprintf(buffer, "exception\t%s\t%d\t%d\t%d\n", (char *)(e->name), (ANTLR3_INT32)(e->index), e->line, e->charPositionInLine); // Transmit the message and wait for ack // @@ -795,7 +795,7 @@ if (buffer != NULL) { - out = buffer + sprintf((char *)buffer, "semanticPredicate %s ", result == ANTLR3_TRUE ? "true" : "false"); + out = buffer + sprintf((char *)buffer, "semanticPredicate\t%s\t", result == ANTLR3_TRUE ? "true" : "false"); while (*predicate != '\0') { @@ -877,7 +877,7 @@ // Now prepend the command // - buffer->insert8 (buffer, 0, "consumeNode "); + buffer->insert8 (buffer, 0, "consumeNode\t"); buffer->addc (buffer, '\n'); // Send to the debugger and wait for the ack @@ -894,9 +894,9 @@ // Now prepend the command // - buffer->insert8 (buffer, 0, " "); + buffer->insert8 (buffer, 0, "\t"); buffer->inserti (buffer, 0, i); - buffer->insert8 (buffer, 0, "LN "); + buffer->insert8 (buffer, 0, "LN\t"); buffer->addc (buffer, '\n'); // Send to the debugger and wait for the ack @@ -908,7 +908,7 @@ nilNode (pANTLR3_DEBUG_EVENT_LISTENER delboy, pANTLR3_BASE_TREE t) { char buffer[128]; - sprintf(buffer, "nilNode %d\n", delboy->adaptor->getUniqueID(delboy->adaptor, t)); + sprintf(buffer, "nilNode\t%d\n", delboy->adaptor->getUniqueID(delboy->adaptor, t)); transmit(delboy, buffer); } @@ -936,7 +936,7 @@ // Adaptor ID // delboy->tokenString->addi(delboy->tokenString, delboy->adaptor->getUniqueID(delboy->adaptor, t)); - delboy->tokenString->addc(delboy->tokenString, ' '); + delboy->tokenString->addc(delboy->tokenString, '\t'); // Type of the current token (which may be imaginary) // @@ -971,7 +971,7 @@ // Empty string // - delboy->tokenString->set8(delboy->tokenString, (const char *)"errorNode "); + delboy->tokenString->set8(delboy->tokenString, (const char *)"errorNode\t"); // Now we serialize the elements of the node.Note that the debugger only // uses 32 bits. @@ -979,7 +979,7 @@ // Adaptor ID // delboy->tokenString->addi(delboy->tokenString, delboy->adaptor->getUniqueID(delboy->adaptor, t)); - delboy->tokenString->addc(delboy->tokenString, ' '); + delboy->tokenString->addc(delboy->tokenString, '\t'); // Type of the current token (which is an error) // @@ -1004,7 +1004,7 @@ { char buffer[128]; - sprintf(buffer, "createNode %d %d\n", delboy->adaptor->getUniqueID(delboy->adaptor, node), (ANTLR3_UINT32)token->getTokenIndex(token)); + sprintf(buffer, "createNode\t%d\t%d\n", delboy->adaptor->getUniqueID(delboy->adaptor, node), (ANTLR3_UINT32)token->getTokenIndex(token)); transmit(delboy, buffer); } @@ -1014,7 +1014,7 @@ { char buffer[128]; - sprintf(buffer, "becomeRoot %d %d\n", delboy->adaptor->getUniqueID(delboy->adaptor, newRoot), + sprintf(buffer, "becomeRoot\t%d\t%d\n", delboy->adaptor->getUniqueID(delboy->adaptor, newRoot), delboy->adaptor->getUniqueID(delboy->adaptor, oldRoot) ); transmit(delboy, buffer); @@ -1026,7 +1026,7 @@ { char buffer[128]; - sprintf(buffer, "addChild %d %d\n", delboy->adaptor->getUniqueID(delboy->adaptor, root), + sprintf(buffer, "addChild\t%d\t%d\n", delboy->adaptor->getUniqueID(delboy->adaptor, root), delboy->adaptor->getUniqueID(delboy->adaptor, child) ); transmit(delboy, buffer); @@ -1037,7 +1037,7 @@ { char buffer[128]; - sprintf(buffer, "becomeRoot %d %d %d\n", delboy->adaptor->getUniqueID(delboy->adaptor, t), + sprintf(buffer, "becomeRoot\t%d\t%d\t%d\n", delboy->adaptor->getUniqueID(delboy->adaptor, t), (ANTLR3_UINT32)tokenStartIndex, (ANTLR3_UINT32)tokenStopIndex ); diff -Nru libantlr3c-3.2/src/antlr3encodings.c libantlr3c-3.4+dfsg/src/antlr3encodings.c --- libantlr3c-3.2/src/antlr3encodings.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3encodings.c 2011-06-22 22:32:16.000000000 +0000 @@ -40,7 +40,7 @@ /// Convert 8 bit character to ANTLR char form. /// -/// \param[in] inc Input character to transform in 8 bit ASCII form. +/// \param[in] inc Input character to transform from 8 bit form. /// \return ANTLR3_UCHAR encoding of the character. /// ANTLR3_API diff -Nru libantlr3c-3.2/src/antlr3filestream.c libantlr3c-3.4+dfsg/src/antlr3filestream.c --- libantlr3c-3.2/src/antlr3filestream.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3filestream.c 2011-06-22 22:32:16.000000000 +0000 @@ -46,6 +46,255 @@ #include +static void setupInputStream (pANTLR3_INPUT_STREAM input); +static pANTLR3_INPUT_STREAM antlr3CreateFileStream (pANTLR3_UINT8 fileName); +static pANTLR3_INPUT_STREAM antlr3CreateStringStream (pANTLR3_UINT8 data); + +ANTLR3_API pANTLR3_INPUT_STREAM +antlr3FileStreamNew(pANTLR3_UINT8 fileName, ANTLR3_UINT32 encoding) +{ + pANTLR3_INPUT_STREAM input; + + // First order of business is to read the file into some buffer space + // as just straight 8 bit bytes. Then we will work out the encoding and + // byte order and adjust the API functions that are installed for the + // default 8Bit stream accordingly. + // + input = antlr3CreateFileStream(fileName); + if (input == NULL) + { + return NULL; + } + + // We have the data in memory now so we can deal with it according to + // the encoding scheme we were given by the user. + // + input->encoding = encoding; + + // Now we need to work out the endian type and install any + // API functions that differ from 8Bit + // + setupInputStream(input); + + // Now we can set up the file name + // + input->istream->streamName = input->strFactory->newStr8(input->strFactory, fileName); + input->fileName = input->istream->streamName; + + return input; +} + + +ANTLR3_API pANTLR3_INPUT_STREAM +antlr3StringStreamNew(pANTLR3_UINT8 data, ANTLR3_UINT32 encoding, ANTLR3_UINT32 size, pANTLR3_UINT8 name) +{ + pANTLR3_INPUT_STREAM input; + + // First order of business is to set up the stream and install the data pointer. + // Then we will work out the encoding and byte order and adjust the API functions that are installed for the + // default 8Bit stream accordingly. + // + input = antlr3CreateStringStream(data); + if (input == NULL) + { + return NULL; + } + + // Size (in bytes) of the given 'string' + // + input->sizeBuf = size; + + // We have the data in memory now so we can deal with it according to + // the encoding scheme we were given by the user. + // + input->encoding = encoding; + + // Now we need to work out the endian type and install any + // API functions that differ from 8Bit + // + setupInputStream(input); + + // Now we can set up the file name + // + input->istream->streamName = input->strFactory->newStr8(input->strFactory, name); + input->fileName = input->istream->streamName; + + return input; +} + + +/// Determine endianess of the input stream and install the +/// API required for the encoding in that format. +/// +static void +setupInputStream(pANTLR3_INPUT_STREAM input) +{ + ANTLR3_BOOLEAN isBigEndian; + + // Used to determine the endianness of the machine we are currently + // running on. + // + ANTLR3_UINT16 bomTest = 0xFEFF; + + // What endianess is the machine we are running on? If the incoming + // encoding endianess is the same as this machine's natural byte order + // then we can use more efficient API calls. + // + if (*((pANTLR3_UINT8)(&bomTest)) == 0xFE) + { + isBigEndian = ANTLR3_TRUE; + } + else + { + isBigEndian = ANTLR3_FALSE; + } + + // What encoding did the user tell us {s}he thought it was? I am going + // to get sick of the questions on antlr-interest, I know I am. + // + switch (input->encoding) + { + case ANTLR3_ENC_UTF8: + + // See if there is a BOM at the start of this UTF-8 sequence + // and just eat it if there is. Windows .TXT files have this for instance + // as it identifies UTF-8 even though it is of no consequence for byte order + // as UTF-8 does not have a byte order. + // + if ( (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar)) == 0xEF + && (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar+1)) == 0xBB + && (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar+2)) == 0xBF + ) + { + // The UTF8 BOM is present so skip it + // + input->nextChar = (void *)((pANTLR3_UINT8)input->nextChar + 3); + } + + // Install the UTF8 input routines + // + antlr3UTF8SetupStream(input); + break; + + case ANTLR3_ENC_UTF16: + + // See if there is a BOM at the start of the input. If not then + // we assume that the byte order is the natural order of this + // machine (or it is really UCS2). If there is a BOM we determine if the encoding + // is the same as the natural order of this machine. + // + if ( (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar)) == 0xFE + && (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar+1)) == 0xFF + ) + { + // BOM Present, indicates Big Endian + // + input->nextChar = (void *)((pANTLR3_UINT8)input->nextChar + 2); + + antlr3UTF16SetupStream(input, isBigEndian, ANTLR3_TRUE); + } + else if ( (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar)) == 0xFF + && (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar+1)) == 0xFE + ) + { + // BOM present, indicates Little Endian + // + input->nextChar = (void *)((pANTLR3_UINT8)input->nextChar + 2); + + antlr3UTF16SetupStream(input, isBigEndian, ANTLR3_FALSE); + } + else + { + // No BOM present, assume local computer byte order + // + antlr3UTF16SetupStream(input, isBigEndian, isBigEndian); + } + break; + + case ANTLR3_ENC_UTF32: + + // See if there is a BOM at the start of the input. If not then + // we assume that the byte order is the natural order of this + // machine. If there is we determine if the encoding + // is the same as the natural order of this machine. + // + if ( (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar)) == 0x00 + && (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar+1)) == 0x00 + && (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar+2)) == 0xFE + && (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar+3)) == 0xFF + ) + { + // BOM Present, indicates Big Endian + // + input->nextChar = (void *)((pANTLR3_UINT8)input->nextChar + 4); + + antlr3UTF32SetupStream(input, isBigEndian, ANTLR3_TRUE); + } + else if ( (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar)) == 0xFF + && (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar+1)) == 0xFE + && (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar+1)) == 0x00 + && (ANTLR3_UINT8)(*((pANTLR3_UINT8)input->nextChar+1)) == 0x00 + ) + { + // BOM present, indicates Little Endian + // + input->nextChar = (void *)((pANTLR3_UINT8)input->nextChar + 4); + + antlr3UTF32SetupStream(input, isBigEndian, ANTLR3_FALSE); + } + else + { + // No BOM present, assume local computer byte order + // + antlr3UTF32SetupStream(input, isBigEndian, isBigEndian); + } + break; + + case ANTLR3_ENC_UTF16BE: + + // Encoding is definately Big Endian with no BOM + // + antlr3UTF16SetupStream(input, isBigEndian, ANTLR3_TRUE); + break; + + case ANTLR3_ENC_UTF16LE: + + // Encoding is definately Little Endian with no BOM + // + antlr3UTF16SetupStream(input, isBigEndian, ANTLR3_FALSE); + break; + + case ANTLR3_ENC_UTF32BE: + + // Encoding is definately Big Endian with no BOM + // + antlr3UTF32SetupStream(input, isBigEndian, ANTLR3_TRUE); + break; + + case ANTLR3_ENC_UTF32LE: + + // Encoding is definately Little Endian with no BOM + // + antlr3UTF32SetupStream(input, isBigEndian, ANTLR3_FALSE); + break; + + case ANTLR3_ENC_EBCDIC: + + // EBCDIC is basically the same as ASCII but with an on the + // fly translation to ASCII + // + antlr3EBCDICSetupStream(input); + break; + + case ANTLR3_ENC_8BIT: + default: + + // Standard 8bit/ASCII + // + antlr38BitSetupStream(input); + break; + } +} /** \brief Use the contents of an operating system file as the input * for an input stream. @@ -55,8 +304,8 @@ * - Pointer to new input stream context upon success * - One of the ANTLR3_ERR_ defines on error. */ -ANTLR3_API pANTLR3_INPUT_STREAM -antlr3AsciiFileStreamNew(pANTLR3_UINT8 fileName) +static pANTLR3_INPUT_STREAM +antlr3CreateFileStream(pANTLR3_UINT8 fileName) { // Pointer to the input stream we are going to create // @@ -80,18 +329,17 @@ // Structure was allocated correctly, now we can read the file. // - status = antlr3readAscii(input, fileName); + status = antlr3read8Bit(input, fileName); - // Call the common 8 bit ASCII input stream handler - // Initializer type thingy doobry function. + // Call the common 8 bit input stream handler + // initialization. // - antlr3AsciiSetupStream(input, ANTLR3_CHARSTREAM); - - // Now we can set up the file name - // - input->istream->streamName = input->strFactory->newStr(input->strFactory, fileName); - input->fileName = input->istream->streamName; + antlr3GenericSetupStream(input); + // However if the file was not there or something then we + // need to close. Have to wait until here as we cannot call + // close until the API is installed of course. + // if (status != ANTLR3_SUCCESS) { input->close(input); @@ -102,9 +350,9 @@ } ANTLR3_API ANTLR3_UINT32 -antlr3readAscii(pANTLR3_INPUT_STREAM input, pANTLR3_UINT8 fileName) +antlr3read8Bit(pANTLR3_INPUT_STREAM input, pANTLR3_UINT8 fileName) { - ANTLR3_FDSC infile; + ANTLR3_FDSC infile; ANTLR3_UINT32 fSize; /* Open the OS file in read binary mode @@ -181,3 +429,46 @@ { return (ANTLR3_UINT32)fread(data, (size_t)count, 1, fdsc); } + + +/** \brief Use the supplied 'string' as input to the stream + * + * \param data Pointer to the input data + * \return + * - Pointer to new input stream context upon success + * - NULL defines on error. + */ +static pANTLR3_INPUT_STREAM +antlr3CreateStringStream(pANTLR3_UINT8 data) +{ + // Pointer to the input stream we are going to create + // + pANTLR3_INPUT_STREAM input; + + if (data == NULL) + { + return NULL; + } + + // Allocate memory for the input stream structure + // + input = (pANTLR3_INPUT_STREAM) + ANTLR3_CALLOC(1, sizeof(ANTLR3_INPUT_STREAM)); + + if (input == NULL) + { + return NULL; + } + + // Structure was allocated correctly, now we can install the pointer + // + input->data = data; + input->isAllocated = ANTLR3_FALSE; + + // Call the common 8 bit input stream handler + // initialization. + // + antlr3GenericSetupStream(input); + + return input; +} \ No newline at end of file diff -Nru libantlr3c-3.2/src/antlr3inputstream.c libantlr3c-3.4+dfsg/src/antlr3inputstream.c --- libantlr3c-3.2/src/antlr3inputstream.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3inputstream.c 2011-06-22 22:32:16.000000000 +0000 @@ -33,103 +33,147 @@ #include +// ----------------------------------- +// Generic 8 bit input such as latin-1 +// + +// 8Bit INT Stream API +// +static void antlr38BitConsume (pANTLR3_INT_STREAM is); +static ANTLR3_UCHAR antlr38BitLA (pANTLR3_INT_STREAM is, ANTLR3_INT32 la); +static ANTLR3_UCHAR antlr38BitLA_ucase (pANTLR3_INT_STREAM is, ANTLR3_INT32 la); +static ANTLR3_MARKER antlr38BitIndex (pANTLR3_INT_STREAM is); +static ANTLR3_MARKER antlr38BitMark (pANTLR3_INT_STREAM is); +static void antlr38BitRewind (pANTLR3_INT_STREAM is, ANTLR3_MARKER mark); +static void antlr38BitRewindLast (pANTLR3_INT_STREAM is); +static void antlr38BitRelease (pANTLR3_INT_STREAM is, ANTLR3_MARKER mark); +static void antlr38BitSeek (pANTLR3_INT_STREAM is, ANTLR3_MARKER seekPoint); +static pANTLR3_STRING antlr38BitGetSourceName (pANTLR3_INT_STREAM is); + +// 8Bit Charstream API functions +// +static void antlr3InputClose (pANTLR3_INPUT_STREAM input); +static void antlr3InputReset (pANTLR3_INPUT_STREAM input); +static void antlr38BitReuse (pANTLR3_INPUT_STREAM input, pANTLR3_UINT8 inString, ANTLR3_UINT32 size, pANTLR3_UINT8 name); +static void * antlr38BitLT (pANTLR3_INPUT_STREAM input, ANTLR3_INT32 lt); +static ANTLR3_UINT32 antlr38BitSize (pANTLR3_INPUT_STREAM input); +static pANTLR3_STRING antlr38BitSubstr (pANTLR3_INPUT_STREAM input, ANTLR3_MARKER start, ANTLR3_MARKER stop); +static ANTLR3_UINT32 antlr38BitGetLine (pANTLR3_INPUT_STREAM input); +static void * antlr38BitGetLineBuf (pANTLR3_INPUT_STREAM input); +static ANTLR3_UINT32 antlr38BitGetCharPosition (pANTLR3_INPUT_STREAM input); +static void antlr38BitSetLine (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 line); +static void antlr38BitSetCharPosition (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 position); +static void antlr38BitSetNewLineChar (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 newlineChar); +static void antlr38BitSetUcaseLA (pANTLR3_INPUT_STREAM input, ANTLR3_BOOLEAN flag); + +// ----------------------------------- +// UTF16 (also covers UCS2) +// +// INT Stream API +// +static void antlr3UTF16Consume (pANTLR3_INT_STREAM is); +static ANTLR3_UCHAR antlr3UTF16LA (pANTLR3_INT_STREAM is, ANTLR3_INT32 la); +static void antlr3UTF16ConsumeLE (pANTLR3_INT_STREAM is); +static ANTLR3_UCHAR antlr3UTF16LALE (pANTLR3_INT_STREAM is, ANTLR3_INT32 la); +static void antlr3UTF16ConsumeBE (pANTLR3_INT_STREAM is); +static ANTLR3_UCHAR antlr3UTF16LABE (pANTLR3_INT_STREAM is, ANTLR3_INT32 la); +static ANTLR3_MARKER antlr3UTF16Index (pANTLR3_INT_STREAM is); +static void antlr3UTF16Seek (pANTLR3_INT_STREAM is, ANTLR3_MARKER seekPoint); + +// UTF16 Charstream API functions +// +static pANTLR3_STRING antlr3UTF16Substr (pANTLR3_INPUT_STREAM input, ANTLR3_MARKER start, ANTLR3_MARKER stop); +// ----------------------------------- +// UTF32 (also covers UCS2) +// // INT Stream API // -static void antlr3AsciiConsume (pANTLR3_INT_STREAM is); -static ANTLR3_UCHAR antlr3AsciiLA (pANTLR3_INT_STREAM is, ANTLR3_INT32 la); -static ANTLR3_UCHAR antlr3AsciiLA_ucase (pANTLR3_INT_STREAM is, ANTLR3_INT32 la); -static ANTLR3_MARKER antlr3AsciiIndex (pANTLR3_INT_STREAM is); -static ANTLR3_MARKER antlr3AsciiMark (pANTLR3_INT_STREAM is); -static void antlr3AsciiRewind (pANTLR3_INT_STREAM is, ANTLR3_MARKER mark); -static void antlr3AsciiRewindLast (pANTLR3_INT_STREAM is); -static void antlr3AsciiRelease (pANTLR3_INT_STREAM is, ANTLR3_MARKER mark); -static void antlr3AsciiSeek (pANTLR3_INT_STREAM is, ANTLR3_MARKER seekPoint); -static pANTLR3_STRING antlr3AsciiGetSourceName (pANTLR3_INT_STREAM is); - -// ASCII Charstream API functions -// -static void antlr3InputClose (pANTLR3_INPUT_STREAM input); -static void antlr3InputReset (pANTLR3_INPUT_STREAM input); -static void * antlr3AsciiLT (pANTLR3_INPUT_STREAM input, ANTLR3_INT32 lt); -static ANTLR3_UINT32 antlr3AsciiSize (pANTLR3_INPUT_STREAM input); -static pANTLR3_STRING antlr3AsciiSubstr (pANTLR3_INPUT_STREAM input, ANTLR3_MARKER start, ANTLR3_MARKER stop); -static ANTLR3_UINT32 antlr3AsciiGetLine (pANTLR3_INPUT_STREAM input); -static void * antlr3AsciiGetLineBuf (pANTLR3_INPUT_STREAM input); -static ANTLR3_UINT32 antlr3AsciiGetCharPosition (pANTLR3_INPUT_STREAM input); -static void antlr3AsciiSetLine (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 line); -static void antlr3AsciiSetCharPosition (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 position); -static void antlr3AsciiSetNewLineChar (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 newlineChar); -static void antlr3AsciiSetUcaseLA (pANTLR3_INPUT_STREAM input, ANTLR3_BOOLEAN flag); +static void antlr3UTF32Consume (pANTLR3_INT_STREAM is); +static ANTLR3_UCHAR antlr3UTF32LA (pANTLR3_INT_STREAM is, ANTLR3_INT32 la); +static ANTLR3_UCHAR antlr3UTF32LALE (pANTLR3_INT_STREAM is, ANTLR3_INT32 la); +static ANTLR3_UCHAR antlr3UTF32LABE (pANTLR3_INT_STREAM is, ANTLR3_INT32 la); +static ANTLR3_MARKER antlr3UTF32Index (pANTLR3_INT_STREAM is); +static void antlr3UTF32Seek (pANTLR3_INT_STREAM is, ANTLR3_MARKER seekPoint); + +// UTF16 Charstream API functions +// +static pANTLR3_STRING antlr3UTF32Substr (pANTLR3_INPUT_STREAM input, ANTLR3_MARKER start, ANTLR3_MARKER stop); -/// \brief Common function to setup function interface for an 8 bit ASCII input stream. +// ------------------------------------ +// UTF-8 +// +static void antlr3UTF8Consume (pANTLR3_INT_STREAM is); +static ANTLR3_UCHAR antlr3UTF8LA (pANTLR3_INT_STREAM is, ANTLR3_INT32 la); + +// ------------------------------------ +// EBCDIC +// +static ANTLR3_UCHAR antlr3EBCDICLA (pANTLR3_INT_STREAM is, ANTLR3_INT32 la); + +/// \brief Common function to setup function interface for an 8 bit input stream. /// /// \param input Input stream context pointer /// /// \remark -/// - Many of the 8 bit ASCII oriented file stream handling functions will be usable -/// by any or at least some other input streams. Therefore it is perfectly acceptable -/// to call this function to install the ASCII handler then override just those functions +/// - Many of the 8 bit oriented file stream handling functions will be usable +/// by any or at least some, other input streams. Therefore it is perfectly acceptable +/// to call this function to install the 8Bit handler then override just those functions /// that would not work for the particular input encoding, such as consume for instance. /// void -antlr3AsciiSetupStream (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 type) +antlr38BitSetupStream (pANTLR3_INPUT_STREAM input) { // Build a string factory for this stream - // - input->strFactory = antlr3StringFactoryNew(); + // + input->strFactory = antlr3StringFactoryNew(input->encoding); - // Default stream set up is for ASCII, therefore there is nothing else - // to do but set it up as such + // Default stream API set up is for 8Bit, so we are done // - antlr3GenericSetupStream(input, type); } - void -antlr3GenericSetupStream (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 type) +antlr3GenericSetupStream (pANTLR3_INPUT_STREAM input) { - - /* Install function pointers for an 8 bit ASCII input + /* Install function pointers for an 8 bit input */ /* Allocate stream interface */ - input->istream = antlr3IntStreamNew(); - input->istream->type = ANTLR3_CHARSTREAM; - input->istream->super = input; - - input->istream->type = type; + input->istream = antlr3IntStreamNew(); + input->istream->type = ANTLR3_CHARSTREAM; + input->istream->super = input; /* Intstream API */ - input->istream->consume = antlr3AsciiConsume; /* Consume the next 8 bit character in the buffer */ - input->istream->_LA = antlr3AsciiLA; /* Return the UTF32 character at offset n (1 based) */ - input->istream->index = antlr3AsciiIndex; /* Current index (offset from first character */ - input->istream->mark = antlr3AsciiMark; /* Record the current lex state for later restore */ - input->istream->rewind = antlr3AsciiRewind; /* How to rewind the input */ - input->istream->rewindLast = antlr3AsciiRewindLast; /* How to rewind the input */ - input->istream->seek = antlr3AsciiSeek; /* How to seek to a specific point in the stream */ - input->istream->release = antlr3AsciiRelease; /* Reset marks after mark n */ - input->istream->getSourceName = antlr3AsciiGetSourceName; // Return a string that names the input source - - /* Charstream API - */ - input->close = antlr3InputClose; /* Close down the stream completely */ - input->free = antlr3InputClose; /* Synonym for free */ - input->reset = antlr3InputReset; /* Reset input to start */ - input->_LT = antlr3AsciiLT; /* Same as _LA for 8 bit Ascii file */ - input->size = antlr3AsciiSize; /* Return the size of the input buffer */ - input->substr = antlr3AsciiSubstr; /* Return a string from the input stream */ - input->getLine = antlr3AsciiGetLine; /* Return the current line number in the input stream */ - input->getLineBuf = antlr3AsciiGetLineBuf; /* Return a pointer to the start of the current line being consumed */ - input->getCharPositionInLine = antlr3AsciiGetCharPosition; /* Return the offset into the current line of input */ - input->setLine = antlr3AsciiSetLine; /* Set the input stream line number (does not set buffer pointers) */ - input->setCharPositionInLine = antlr3AsciiSetCharPosition; /* Set the offset in to the current line (does not set any pointers ) */ - input->SetNewLineChar = antlr3AsciiSetNewLineChar; /* Set the value of the newline trigger character */ - input->setUcaseLA = antlr3AsciiSetUcaseLA; + input->istream->consume = antlr38BitConsume; // Consume the next 8 bit character in the buffer + input->istream->_LA = antlr38BitLA; // Return the UTF32 character at offset n (1 based) + input->istream->index = antlr38BitIndex; // Current index (offset from first character + input->istream->mark = antlr38BitMark; // Record the current lex state for later restore + input->istream->rewind = antlr38BitRewind; // How to rewind the input + input->istream->rewindLast = antlr38BitRewindLast; // How to rewind the input + input->istream->seek = antlr38BitSeek; // How to seek to a specific point in the stream + input->istream->release = antlr38BitRelease; // Reset marks after mark n + input->istream->getSourceName = antlr38BitGetSourceName; // Return a string that names the input source + + /* Charstream API + */ + input->close = antlr3InputClose; // Close down the stream completely + input->free = antlr3InputClose; // Synonym for free + input->reset = antlr3InputReset; // Reset input to start + input->reuse = antlr38BitReuse; // Install a new input string and reset + input->_LT = antlr38BitLT; // Same as _LA for 8 bit file + input->size = antlr38BitSize; // Return the size of the input buffer + input->substr = antlr38BitSubstr; // Return a string from the input stream + input->getLine = antlr38BitGetLine; // Return the current line number in the input stream + input->getLineBuf = antlr38BitGetLineBuf; // Return a pointer to the start of the current line being consumed + input->getCharPositionInLine = antlr38BitGetCharPosition; // Return the offset into the current line of input + input->setLine = antlr38BitSetLine; // Set the input stream line number (does not set buffer pointers) + input->setCharPositionInLine = antlr38BitSetCharPosition; // Set the offset in to the current line (does not set any pointers) + input->SetNewLineChar = antlr38BitSetNewLineChar; // Set the value of the newline trigger character + input->setUcaseLA = antlr38BitSetUcaseLA; // Changes the LA function to return upper case always - input->charByteSize = 1; // Size in bytes of characters in this stream. + input->charByteSize = 1; // Size in bytes of characters in this stream. /* Initialize entries for tables etc */ @@ -146,7 +190,7 @@ } static pANTLR3_STRING -antlr3AsciiGetSourceName(pANTLR3_INT_STREAM is) +antlr38BitGetSourceName(pANTLR3_INT_STREAM is) { return is->streamName; } @@ -192,19 +236,19 @@ } static void -antlr3AsciiSetUcaseLA (pANTLR3_INPUT_STREAM input, ANTLR3_BOOLEAN flag) +antlr38BitSetUcaseLA (pANTLR3_INPUT_STREAM input, ANTLR3_BOOLEAN flag) { if (flag) { // Return the upper case version of the characters // - input->istream->_LA = antlr3AsciiLA_ucase; + input->istream->_LA = antlr38BitLA_ucase; } else { // Return the raw characters as they are in the buffer // - input->istream->_LA = antlr3AsciiLA; + input->istream->_LA = antlr38BitLA; } } @@ -223,24 +267,52 @@ input->currentLine = input->data; input->markDepth = 0; /* Reset markers */ - /* Free up the markers table if it is there + /* Clear out up the markers table if it is there */ if (input->markers != NULL) { - input->markers->free(input->markers); + input->markers->clear(input->markers); + } + else + { + /* Install a new markers table + */ + input->markers = antlr3VectorNew(0); } +} - /* Install a new markers table - */ - input->markers = antlr3VectorNew(0); +/** Install a new source code in to a working input stream so that the + * input stream can be reused. + */ +static void +antlr38BitReuse(pANTLR3_INPUT_STREAM input, pANTLR3_UINT8 inString, ANTLR3_UINT32 size, pANTLR3_UINT8 name) +{ + input->isAllocated = ANTLR3_FALSE; + input->data = inString; + input->sizeBuf = size; + + // Now we can set up the file name. As we are reusing the stream, there may already + // be a string that we can reuse for holding the filename. + // + if (input->istream->streamName == NULL) + { + input->istream->streamName = input->strFactory->newStr(input->strFactory, name == NULL ? (pANTLR3_UINT8)"-memory-" : name); + input->fileName = input->istream->streamName; + } + else + { + input->istream->streamName->set(input->istream->streamName, (name == NULL ? (const char *)"-memory-" : (const char *)name)); + } + + input->reset(input); } -/** \brief Consume the next character in an 8 bit ASCII input stream +/** \brief Consume the next character in an 8 bit input stream * * \param input Input stream context pointer */ static void -antlr3AsciiConsume(pANTLR3_INT_STREAM is) +antlr38BitConsume(pANTLR3_INT_STREAM is) { pANTLR3_INPUT_STREAM input; @@ -275,7 +347,7 @@ * \return Next input character in internal ANTLR3 encoding (UTF32) */ static ANTLR3_UCHAR -antlr3AsciiLA(pANTLR3_INT_STREAM is, ANTLR3_INT32 la) +antlr38BitLA(pANTLR3_INT_STREAM is, ANTLR3_INT32 la) { pANTLR3_INPUT_STREAM input; @@ -291,7 +363,7 @@ } } -/** \brief Return the input element assuming an 8 bit ASCII input and +/** \brief Return the input element assuming an 8 bit input and * always return the UPPER CASE character. * Note that this is 8 bit and so we assume that the toupper * function will use the correct locale for 8 bits. @@ -302,7 +374,7 @@ * \return Next input character in internal ANTLR3 encoding (UTF32) */ static ANTLR3_UCHAR -antlr3AsciiLA_ucase (pANTLR3_INT_STREAM is, ANTLR3_INT32 la) +antlr38BitLA_ucase (pANTLR3_INT_STREAM is, ANTLR3_INT32 la) { pANTLR3_INPUT_STREAM input; @@ -327,7 +399,7 @@ * \return Next input character in internal ANTLR3 encoding (UTF32) */ static void * -antlr3AsciiLT(pANTLR3_INPUT_STREAM input, ANTLR3_INT32 lt) +antlr38BitLT(pANTLR3_INPUT_STREAM input, ANTLR3_INT32 lt) { /* Casting is horrible but it means no warnings and LT should never be called * on a character stream anyway I think. If it is then, the void * will need to be @@ -341,7 +413,7 @@ * \param[in] input Input stream context pointer */ static ANTLR3_MARKER -antlr3AsciiIndex(pANTLR3_INT_STREAM is) +antlr38BitIndex(pANTLR3_INT_STREAM is) { pANTLR3_INPUT_STREAM input; @@ -350,7 +422,7 @@ return (ANTLR3_MARKER)(((pANTLR3_UINT8)input->nextChar)); } -/** \brief Return the size of the current input stream, as an Ascii file +/** \brief Return the size of the current input stream, as an 8Bit file * which in this case is the total input. Other implementations may provide * more sophisticated implementations to deal with non-recoverable streams * and so on. @@ -358,19 +430,19 @@ * \param[in] input Input stream context pointer */ static ANTLR3_UINT32 -antlr3AsciiSize(pANTLR3_INPUT_STREAM input) +antlr38BitSize(pANTLR3_INPUT_STREAM input) { return input->sizeBuf; } -/** \brief Mark the current input point in an Ascii 8 bit stream +/** \brief Mark the current input point in an 8Bit 8 bit stream * such as a file stream, where all the input is available in the * buffer. * * \param[in] is Input stream context pointer */ static ANTLR3_MARKER -antlr3AsciiMark (pANTLR3_INT_STREAM is) +antlr38BitMark (pANTLR3_INT_STREAM is) { pANTLR3_LEX_STATE state; pANTLR3_INPUT_STREAM input; @@ -420,10 +492,10 @@ * \param[in] input Input stream context pointer * * \remark - * Assumes ASCII (or at least, 8 Bit) input stream. + * Assumes 8 Bit input stream. */ static void -antlr3AsciiRewindLast (pANTLR3_INT_STREAM is) +antlr38BitRewindLast (pANTLR3_INT_STREAM is) { is->rewind(is, is->lastMarker); } @@ -433,10 +505,10 @@ * \param[in] input Input stream context pointer * * \remark - * Assumes ASCII (or at least, 8 Bit) input stream. + * Assumes 8 Bit input stream. */ static void -antlr3AsciiRewind (pANTLR3_INT_STREAM is, ANTLR3_MARKER mark) +antlr38BitRewind (pANTLR3_INT_STREAM is, ANTLR3_MARKER mark) { pANTLR3_LEX_STATE state; pANTLR3_INPUT_STREAM input; @@ -454,7 +526,7 @@ /* Seek input pointer to the requested point (note we supply the void *pointer * to whatever is implementing the int stream to seek). */ - antlr3AsciiSeek(is, (ANTLR3_MARKER)(state->nextChar)); + antlr38BitSeek(is, (ANTLR3_MARKER)(state->nextChar)); /* Reset to the reset of the information in the mark */ @@ -472,10 +544,10 @@ * \param[in] input Input stream context pointer * * \remark - * Assumes ASCII (or at least, 8 Bit) input stream. + * Assumes 8 Bit input stream. */ static void -antlr3AsciiRelease (pANTLR3_INT_STREAM is, ANTLR3_MARKER mark) +antlr38BitRelease (pANTLR3_INT_STREAM is, ANTLR3_MARKER mark) { pANTLR3_INPUT_STREAM input; @@ -492,10 +564,10 @@ * \param[in] input Input stream context pointer * * \remark - * Assumes ASCII (or at least, 8 Bit) input stream. + * Assumes 8 Bit input stream. */ static void -antlr3AsciiSeek (pANTLR3_INT_STREAM is, ANTLR3_MARKER seekPoint) +antlr38BitSeek (pANTLR3_INT_STREAM is, ANTLR3_MARKER seekPoint) { ANTLR3_INT32 count; pANTLR3_INPUT_STREAM input; @@ -520,7 +592,7 @@ } } } -/** Return a substring of the ASCII (8 bit) input stream in +/** Return a substring of the 8 bit input stream in * newly allocated memory. * * \param input Input stream context pointer @@ -528,18 +600,18 @@ * \param stop Offset in the input stream where the string ends. */ static pANTLR3_STRING -antlr3AsciiSubstr (pANTLR3_INPUT_STREAM input, ANTLR3_MARKER start, ANTLR3_MARKER stop) +antlr38BitSubstr (pANTLR3_INPUT_STREAM input, ANTLR3_MARKER start, ANTLR3_MARKER stop) { return input->strFactory->newPtr(input->strFactory, (pANTLR3_UINT8)start, (ANTLR3_UINT32)(stop - start + 1)); } -/** \brief Return the line number as understood by the 8 bit/ASCII input stream. +/** \brief Return the line number as understood by the 8 bit input stream. * * \param input Input stream context pointer * \return Line number in input stream that we believe we are working on. */ static ANTLR3_UINT32 -antlr3AsciiGetLine (pANTLR3_INPUT_STREAM input) +antlr38BitGetLine (pANTLR3_INPUT_STREAM input) { return input->line; } @@ -551,7 +623,7 @@ * \param[in] input */ static void * -antlr3AsciiGetLineBuf (pANTLR3_INPUT_STREAM input) +antlr38BitGetLineBuf (pANTLR3_INPUT_STREAM input) { return input->currentLine; } @@ -562,7 +634,7 @@ * \return Current line offset */ static ANTLR3_UINT32 -antlr3AsciiGetCharPosition (pANTLR3_INPUT_STREAM input) +antlr38BitGetCharPosition (pANTLR3_INPUT_STREAM input) { return input->charPositionInLine; } @@ -579,7 +651,7 @@ * with some original source format. */ static void -antlr3AsciiSetLine (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 line) +antlr38BitSetLine (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 line) { input->line = line; } @@ -591,10 +663,10 @@ * * \remark * This does not set the actual pointers in the input stream, it is purely for reporting - * purposes and so on as per antlr3AsciiSetLine(); + * purposes and so on as per antlr38BitSetLine(); */ static void -antlr3AsciiSetCharPosition (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 position) +antlr38BitSetCharPosition (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 position) { input->charPositionInLine = position; } @@ -610,10 +682,1369 @@ * only, so it is up to the programmer to ensure that the character supplied is valid. */ static void -antlr3AsciiSetNewLineChar (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 newlineChar) +antlr38BitSetNewLineChar (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 newlineChar) { input->newlineChar = newlineChar; } +/// \brief Common function to setup function interface for a UTF16 or UCS2 input stream. +/// +/// \param input Input stream context pointer +/// +/// \remark +/// - Strictly speaking, there is no such thing as a UCS2 input stream as the term +/// tends to confuse the notions of character encoding, unicode and so on. UCS2 is +/// essentially UTF16 without any surrogates and so the standard UTF16 +/// input stream is able to handle it without any special code. +/// +void +antlr3UTF16SetupStream (pANTLR3_INPUT_STREAM input, ANTLR3_BOOLEAN machineBigEndian, ANTLR3_BOOLEAN inputBigEndian) +{ + // Build a string factory for this stream. This is a UTF16 string factory which is a standard + // part of the ANTLR3 string. The string factory is then passed through the whole chain + // of lexer->parser->tree->treeparser and so on. + // + input->strFactory = antlr3StringFactoryNew(input->encoding); + + // Generic API that does not care about endianess. + // + input->istream->index = antlr3UTF16Index; // Calculate current index in input stream, UTF16 based + input->substr = antlr3UTF16Substr; // Return a string from the input stream + input->istream->seek = antlr3UTF16Seek; // How to seek to a specific point in the stream + + // We must install different UTF16 routines according to whether the input + // is the same endianess as the machine we are executing upon or not. If it is not + // then we must install methods that can convert the endianess on the fly as they go + // + + switch (machineBigEndian) + { + case ANTLR3_TRUE: + + // Machine is Big Endian, if the input is also then install the + // methods that do not access input by bytes and reverse them. + // Otherwise install endian aware methods. + // + if (inputBigEndian == ANTLR3_TRUE) + { + // Input is machine compatible + // + input->istream->consume = antlr3UTF16Consume; // Consume the next UTF16 character in the buffer + input->istream->_LA = antlr3UTF16LA; // Return the UTF32 character at offset n (1 based) + } + else + { + // Need to use methods that know that the input is little endian + // + input->istream->consume = antlr3UTF16ConsumeLE; // Consume the next UTF16 character in the buffer + input->istream->_LA = antlr3UTF16LALE; // Return the UTF32 character at offset n (1 based) + } + break; + + case ANTLR3_FALSE: + + // Machine is Little Endian, if the input is also then install the + // methods that do not access input by bytes and reverse them. + // Otherwise install endian aware methods. + // + if (inputBigEndian == ANTLR3_FALSE) + { + // Input is machine compatible + // + input->istream->consume = antlr3UTF16Consume; // Consume the next UTF16 character in the buffer + input->istream->_LA = antlr3UTF16LA; // Return the UTF32 character at offset n (1 based) + } + else + { + // Need to use methods that know that the input is Big Endian + // + input->istream->consume = antlr3UTF16ConsumeBE; // Consume the next UTF16 character in the buffer + input->istream->_LA = antlr3UTF16LABE; // Return the UTF32 character at offset n (1 based) + } + break; + } + + + input->charByteSize = 2; // Size in bytes of characters in this stream. + +} + +/// \brief Consume the next character in a UTF16 input stream +/// +/// \param input Input stream context pointer +/// +static void +antlr3UTF16Consume(pANTLR3_INT_STREAM is) +{ + pANTLR3_INPUT_STREAM input; + UTF32 ch; + UTF32 ch2; + + input = ((pANTLR3_INPUT_STREAM) (is->super)); + + // Buffer size is always in bytes + // + if ((pANTLR3_UINT8)(input->nextChar) < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + // Indicate one more character in this line + // + input->charPositionInLine++; + + if ((ANTLR3_UCHAR)(*((pANTLR3_UINT16)input->nextChar)) == input->newlineChar) + { + // Reset for start of a new line of input + // + input->line++; + input->charPositionInLine = 0; + input->currentLine = (void *)(((pANTLR3_UINT16)input->nextChar) + 1); + } + + // Increment to next character position, accounting for any surrogates + // + // Next char in natural machine byte order + // + ch = *((UTF16*)input->nextChar); + + // We consumed one 16 bit character + // + input->nextChar = (void *)(((pANTLR3_UINT16)input->nextChar) + 1); + + // If we have a surrogate pair then we need to consume + // a following valid LO surrogate. + // + if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) { + + // If the 16 bits following the high surrogate are in the source buffer... + // + if ((pANTLR3_UINT8)(input->nextChar) < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + // Next character is in natural machine byte order + // + ch2 = *((UTF16*)input->nextChar); + + // If it's a valid low surrogate, consume it + // + if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) + { + // We consumed one 16 bit character + // + input->nextChar = (void *)(((pANTLR3_UINT16)input->nextChar) + 1); + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it. + // + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it because the buffer ended + // + } + // Note that we did not check for an invalid low surrogate here, or that fact that the + // lo surrogate was missing. We just picked out one 16 bit character unless the character + // was a valid hi surrogate, in whcih case we consumed two 16 bit characters. + // + } +} + +/// \brief Return the input element assuming an 8 bit ascii input +/// +/// \param[in] input Input stream context pointer +/// \param[in] la 1 based offset of next input stream element +/// +/// \return Next input character in internal ANTLR3 encoding (UTF32) +/// +static ANTLR3_UCHAR +antlr3UTF16LA(pANTLR3_INT_STREAM is, ANTLR3_INT32 la) +{ + pANTLR3_INPUT_STREAM input; + UTF32 ch; + UTF32 ch2; + UTF16 * nextChar; + + // Find the input interface and where we are currently pointing to + // in the input stream + // + input = ((pANTLR3_INPUT_STREAM) (is->super)); + nextChar = input->nextChar; + + // If a positive offset then advance forward, else retreat + // + if (la >= 0) + { + while (--la > 0 && (pANTLR3_UINT8)nextChar < ((pANTLR3_UINT8)input->data) + input->sizeBuf ) + { + // Advance our copy of the input pointer + // + // Next char in natural machine byte order + // + ch = *nextChar++; + + // If we have a surrogate pair then we need to consume + // a following valid LO surrogate. + // + if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) + { + // If the 16 bits following the high surrogate are in the source buffer... + // + if ((pANTLR3_UINT8)(nextChar) < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + // Next character is in natural machine byte order + // + ch2 = *nextChar; + + // If it's a valid low surrogate, consume it + // + if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) + { + // We consumed one 16 bit character + // + nextChar++; + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it. + // + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it because the buffer ended + // + } + // Note that we did not check for an invalid low surrogate here, or that fact that the + // lo surrogate was missing. We just picked out one 16 bit character unless the character + // was a valid hi surrogate, in whcih case we consumed two 16 bit characters. + // + } + } + else + { + // We need to go backwards from our input point + // + while (la++ < 0 && (pANTLR3_UINT8)nextChar > (pANTLR3_UINT8)input->data ) + { + // Get the previous 16 bit character + // + ch = *--nextChar; + + // If we found a low surrogate then go back one more character if + // the hi surrogate is there + // + if (ch >= UNI_SUR_LOW_START && ch <= UNI_SUR_LOW_END) + { + ch2 = *(nextChar-1); + if (ch2 >= UNI_SUR_HIGH_START && ch2 <= UNI_SUR_HIGH_END) + { + // Yes, there is a high surrogate to match it so decrement one more and point to that + // + nextChar--; + } + } + } + } + + // Our local copy of nextChar is now pointing to either the correct character or end of file + // + // Input buffer size is always in bytes + // + if ( (pANTLR3_UINT8)nextChar >= (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + return ANTLR3_CHARSTREAM_EOF; + } + else + { + // Pick up the next 16 character (native machine byte order) + // + ch = *nextChar++; + + // If we have a surrogate pair then we need to consume + // a following valid LO surrogate. + // + if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) + { + // If the 16 bits following the high surrogate are in the source buffer... + // + if ((pANTLR3_UINT8)(nextChar) < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + // Next character is in natural machine byte order + // + ch2 = *nextChar; + + // If it's a valid low surrogate, consume it + // + if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) + { + // Construct the UTF32 code point + // + ch = ((ch - UNI_SUR_HIGH_START) << halfShift) + + (ch2 - UNI_SUR_LOW_START) + halfBase; + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it. + // + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it because the buffer ended + // + } + } + return ch; +} + + +/// \brief Calculate the current index in the output stream. +/// \param[in] input Input stream context pointer +/// +static ANTLR3_MARKER +antlr3UTF16Index(pANTLR3_INT_STREAM is) +{ + pANTLR3_INPUT_STREAM input; + + input = ((pANTLR3_INPUT_STREAM) (is->super)); + + return (ANTLR3_MARKER)(input->nextChar); +} + +/// \brief Rewind the lexer input to the state specified by the supplied mark. +/// +/// \param[in] input Input stream context pointer +/// +/// \remark +/// Assumes UTF16 input stream. +/// +static void +antlr3UTF16Seek (pANTLR3_INT_STREAM is, ANTLR3_MARKER seekPoint) +{ + pANTLR3_INPUT_STREAM input; + + input = ((pANTLR3_INPUT_STREAM) is->super); + + // If the requested seek point is less than the current + // input point, then we assume that we are resetting from a mark + // and do not need to scan, but can just set to there as rewind will + // reset line numbers and so on. + // + if (seekPoint <= (ANTLR3_MARKER)(input->nextChar)) + { + input->nextChar = (void *)seekPoint; + } + else + { + // Call consume until we reach the asked for seek point or EOF + // + while (is->_LA(is, 1) != ANTLR3_CHARSTREAM_EOF && seekPoint < (ANTLR3_MARKER)input->nextChar) + { + is->consume(is); + } + } +} +/// \brief Return a substring of the UTF16 input stream in +/// newly allocated memory. +/// +/// \param input Input stream context pointer +/// \param start Offset in input stream where the string starts +/// \param stop Offset in the input stream where the string ends. +/// +static pANTLR3_STRING +antlr3UTF16Substr (pANTLR3_INPUT_STREAM input, ANTLR3_MARKER start, ANTLR3_MARKER stop) +{ + return input->strFactory->newPtr(input->strFactory, (pANTLR3_UINT8)start, ((ANTLR3_UINT32_CAST(stop - start))/2) + 1); +} + +/// \brief Consume the next character in a UTF16 input stream when the input is Little Endian and the machine is not +/// Note that the UTF16 routines do not do any substantial verification of the input stream as for performance +/// sake, we assume it is validly encoded. So if a low surrogate is found at the curent input position then we +/// just consume it. Surrogate pairs should be seen as Hi, Lo. So if we have a Lo first, then the input stream +/// is fubar but we just ignore that. +/// +/// \param input Input stream context pointer +/// +static void +antlr3UTF16ConsumeLE(pANTLR3_INT_STREAM is) +{ + pANTLR3_INPUT_STREAM input; + UTF32 ch; + UTF32 ch2; + + input = ((pANTLR3_INPUT_STREAM) (is->super)); + + // Buffer size is always in bytes + // + if ((pANTLR3_UINT8)(input->nextChar) < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + // Indicate one more character in this line + // + input->charPositionInLine++; + + if ((ANTLR3_UCHAR)(*((pANTLR3_UINT16)input->nextChar)) == input->newlineChar) + { + // Reset for start of a new line of input + // + input->line++; + input->charPositionInLine = 0; + input->currentLine = (void *)(((pANTLR3_UINT16)input->nextChar) + 1); + } + + // Increment to next character position, accounting for any surrogates + // + // Next char in litle endian form + // + ch = *((pANTLR3_UINT8)input->nextChar) + (*((pANTLR3_UINT8)input->nextChar + 1) <<8); + + // We consumed one 16 bit character + // + input->nextChar = (void *)(((pANTLR3_UINT16)input->nextChar) + 1); + + // If we have a surrogate pair then we need to consume + // a following valid LO surrogate. + // + if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) { + + // If the 16 bits following the high surrogate are in the source buffer... + // + if ((pANTLR3_UINT8)(input->nextChar) < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + ch2 = *((pANTLR3_UINT8)input->nextChar) + (*((pANTLR3_UINT8)input->nextChar + 1) <<8); + + // If it's a valid low surrogate, consume it + // + if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) + { + // We consumed one 16 bit character + // + input->nextChar = (void *)(((pANTLR3_UINT16)input->nextChar) + 1); + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it. + // + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it because the buffer ended + // + } + // Note that we did not check for an invalid low surrogate here, or that fact that the + // lo surrogate was missing. We just picked out one 16 bit character unless the character + // was a valid hi surrogate, in whcih case we consumed two 16 bit characters. + // + } +} + +/// \brief Return the input element assuming a UTF16 input when the input is Little Endian and the machine is not +/// +/// \param[in] input Input stream context pointer +/// \param[in] la 1 based offset of next input stream element +/// +/// \return Next input character in internal ANTLR3 encoding (UTF32) +/// +static ANTLR3_UCHAR +antlr3UTF16LALE(pANTLR3_INT_STREAM is, ANTLR3_INT32 la) +{ + pANTLR3_INPUT_STREAM input; + UTF32 ch; + UTF32 ch2; + pANTLR3_UCHAR nextChar; + + // Find the input interface and where we are currently pointing to + // in the input stream + // + input = ((pANTLR3_INPUT_STREAM) (is->super)); + nextChar = input->nextChar; + + // If a positive offset then advance forward, else retreat + // + if (la >= 0) + { + while (--la > 0 && (pANTLR3_UINT8)nextChar < ((pANTLR3_UINT8)input->data) + input->sizeBuf ) + { + // Advance our copy of the input pointer + // + // Next char in Little Endian byte order + // + ch = (*nextChar) + (*(nextChar+1) << 8); + nextChar += 2; + + // If we have a surrogate pair then we need to consume + // a following valid LO surrogate. + // + if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) + { + // If the 16 bits following the high surrogate are in the source buffer... + // + if ((pANTLR3_UINT8)(nextChar) < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + // Next character is in little endian byte order + // + ch2 = (*nextChar) + (*(nextChar+1) << 8); + + // If it's a valid low surrogate, consume it + // + if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) + { + // We consumed one 16 bit character + // + nextChar += 2; + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it. + // + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it because the buffer ended + // + } + // Note that we did not check for an invalid low surrogate here, or that fact that the + // lo surrogate was missing. We just picked out one 16 bit character unless the character + // was a valid hi surrogate, in whcih case we consumed two 16 bit characters. + // + } + } + else + { + // We need to go backwards from our input point + // + while (la++ < 0 && (pANTLR3_UINT8)nextChar > (pANTLR3_UINT8)input->data ) + { + // Get the previous 16 bit character + // + ch = (*nextChar - 2) + ((*nextChar -1) << 8); + nextChar -= 2; + + // If we found a low surrogate then go back one more character if + // the hi surrogate is there + // + if (ch >= UNI_SUR_LOW_START && ch <= UNI_SUR_LOW_END) + { + ch2 = (*nextChar - 2) + ((*nextChar -1) << 8); + if (ch2 >= UNI_SUR_HIGH_START && ch2 <= UNI_SUR_HIGH_END) + { + // Yes, there is a high surrogate to match it so decrement one more and point to that + // + nextChar -=2; + } + } + } + } + + // Our local copy of nextChar is now pointing to either the correct character or end of file + // + // Input buffer size is always in bytes + // + if ( (pANTLR3_UINT8)nextChar >= (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + return ANTLR3_CHARSTREAM_EOF; + } + else + { + // Pick up the next 16 character (little endian byte order) + // + ch = (*nextChar) + (*(nextChar+1) << 8); + nextChar += 2; + + // If we have a surrogate pair then we need to consume + // a following valid LO surrogate. + // + if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) + { + // If the 16 bits following the high surrogate are in the source buffer... + // + if ((pANTLR3_UINT8)(nextChar) < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + // Next character is in little endian byte order + // + ch2 = (*nextChar) + (*(nextChar+1) << 8); + + // If it's a valid low surrogate, consume it + // + if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) + { + // Construct the UTF32 code point + // + ch = ((ch - UNI_SUR_HIGH_START) << halfShift) + + (ch2 - UNI_SUR_LOW_START) + halfBase; + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it. + // + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it because the buffer ended + // + } + } + return ch; +} + +/// \brief Consume the next character in a UTF16 input stream when the input is Big Endian and the machine is not +/// +/// \param input Input stream context pointer +/// +static void +antlr3UTF16ConsumeBE(pANTLR3_INT_STREAM is) +{ + pANTLR3_INPUT_STREAM input; + UTF32 ch; + UTF32 ch2; + + input = ((pANTLR3_INPUT_STREAM) (is->super)); + + // Buffer size is always in bytes + // + if ((pANTLR3_UINT8)(input->nextChar) < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + // Indicate one more character in this line + // + input->charPositionInLine++; + + if ((ANTLR3_UCHAR)(*((pANTLR3_UINT16)input->nextChar)) == input->newlineChar) + { + // Reset for start of a new line of input + // + input->line++; + input->charPositionInLine = 0; + input->currentLine = (void *)(((pANTLR3_UINT16)input->nextChar) + 1); + } + + // Increment to next character position, accounting for any surrogates + // + // Next char in big endian form + // + ch = *((pANTLR3_UINT8)input->nextChar + 1) + (*((pANTLR3_UINT8)input->nextChar ) <<8); + + // We consumed one 16 bit character + // + input->nextChar = (void *)(((pANTLR3_UINT16)input->nextChar) + 1); + + // If we have a surrogate pair then we need to consume + // a following valid LO surrogate. + // + if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) { + + // If the 16 bits following the high surrogate are in the source buffer... + // + if ((pANTLR3_UINT8)(input->nextChar) < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + // Big endian + // + ch2 = *((pANTLR3_UINT8)input->nextChar + 1) + (*((pANTLR3_UINT8)input->nextChar ) <<8); + + // If it's a valid low surrogate, consume it + // + if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) + { + // We consumed one 16 bit character + // + input->nextChar = (void *)(((pANTLR3_UINT16)input->nextChar) + 1); + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it. + // + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it because the buffer ended + // + } + // Note that we did not check for an invalid low surrogate here, or that fact that the + // lo surrogate was missing. We just picked out one 16 bit character unless the character + // was a valid hi surrogate, in whcih case we consumed two 16 bit characters. + // + } +} + +/// \brief Return the input element assuming a UTF16 input when the input is Little Endian and the machine is not +/// +/// \param[in] input Input stream context pointer +/// \param[in] la 1 based offset of next input stream element +/// +/// \return Next input character in internal ANTLR3 encoding (UTF32) +/// +static ANTLR3_UCHAR +antlr3UTF16LABE(pANTLR3_INT_STREAM is, ANTLR3_INT32 la) +{ + pANTLR3_INPUT_STREAM input; + UTF32 ch; + UTF32 ch2; + pANTLR3_UCHAR nextChar; + + // Find the input interface and where we are currently pointing to + // in the input stream + // + input = ((pANTLR3_INPUT_STREAM) (is->super)); + nextChar = input->nextChar; + + // If a positive offset then advance forward, else retreat + // + if (la >= 0) + { + while (--la > 0 && (pANTLR3_UINT8)nextChar < ((pANTLR3_UINT8)input->data) + input->sizeBuf ) + { + // Advance our copy of the input pointer + // + // Next char in Big Endian byte order + // + ch = ((*nextChar) << 8) + *(nextChar+1); + nextChar += 2; + + // If we have a surrogate pair then we need to consume + // a following valid LO surrogate. + // + if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) + { + // If the 16 bits following the high surrogate are in the source buffer... + // + if ((pANTLR3_UINT8)(nextChar) < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + // Next character is in big endian byte order + // + ch2 = ((*nextChar) << 8) + *(nextChar+1); + + // If it's a valid low surrogate, consume it + // + if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) + { + // We consumed one 16 bit character + // + nextChar += 2; + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it. + // + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it because the buffer ended + // + } + // Note that we did not check for an invalid low surrogate here, or that fact that the + // lo surrogate was missing. We just picked out one 16 bit character unless the character + // was a valid hi surrogate, in whcih case we consumed two 16 bit characters. + // + } + } + else + { + // We need to go backwards from our input point + // + while (la++ < 0 && (pANTLR3_UINT8)nextChar > (pANTLR3_UINT8)input->data ) + { + // Get the previous 16 bit character + // + ch = ((*nextChar - 2) << 8) + (*nextChar -1); + nextChar -= 2; + + // If we found a low surrogate then go back one more character if + // the hi surrogate is there + // + if (ch >= UNI_SUR_LOW_START && ch <= UNI_SUR_LOW_END) + { + ch2 = ((*nextChar - 2) << 8) + (*nextChar -1); + if (ch2 >= UNI_SUR_HIGH_START && ch2 <= UNI_SUR_HIGH_END) + { + // Yes, there is a high surrogate to match it so decrement one more and point to that + // + nextChar -=2; + } + } + } + } + + // Our local copy of nextChar is now pointing to either the correct character or end of file + // + // Input buffer size is always in bytes + // + if ( (pANTLR3_UINT8)nextChar >= (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + return ANTLR3_CHARSTREAM_EOF; + } + else + { + // Pick up the next 16 character (big endian byte order) + // + ch = ((*nextChar) << 8) + *(nextChar+1); + nextChar += 2; + + // If we have a surrogate pair then we need to consume + // a following valid LO surrogate. + // + if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) + { + // If the 16 bits following the high surrogate are in the source buffer... + // + if ((pANTLR3_UINT8)(nextChar) < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + // Next character is in big endian byte order + // + ch2 = ((*nextChar) << 8) + *(nextChar+1); + + // If it's a valid low surrogate, consume it + // + if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) + { + // Construct the UTF32 code point + // + ch = ((ch - UNI_SUR_HIGH_START) << halfShift) + + (ch2 - UNI_SUR_LOW_START) + halfBase; + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it. + // + } + // Note that we ignore a valid hi surrogate that has no lo surrogate to go with + // it because the buffer ended + // + } + } + return ch; +} + +/// \brief Common function to setup function interface for a UTF3 input stream. +/// +/// \param input Input stream context pointer +/// +void +antlr3UTF32SetupStream (pANTLR3_INPUT_STREAM input, ANTLR3_BOOLEAN machineBigEndian, ANTLR3_BOOLEAN inputBigEndian) +{ + // Build a string factory for this stream. This is a UTF32 string factory which is a standard + // part of the ANTLR3 string. The string factory is then passed through the whole chain of lexer->parser->tree->treeparser + // and so on. + // + input->strFactory = antlr3StringFactoryNew(input->encoding); + + // Generic API that does not care about endianess. + // + input->istream->index = antlr3UTF32Index; // Calculate current index in input stream, UTF16 based + input->substr = antlr3UTF32Substr; // Return a string from the input stream + input->istream->seek = antlr3UTF32Seek; // How to seek to a specific point in the stream + input->istream->consume = antlr3UTF32Consume; // Consume the next UTF32 character in the buffer + + // We must install different UTF32 LA routines according to whether the input + // is the same endianess as the machine we are executing upon or not. If it is not + // then we must install methods that can convert the endianess on the fly as they go + // + switch (machineBigEndian) + { + case ANTLR3_TRUE: + + // Machine is Big Endian, if the input is also then install the + // methods that do not access input by bytes and reverse them. + // Otherwise install endian aware methods. + // + if (inputBigEndian == ANTLR3_TRUE) + { + // Input is machine compatible + // + input->istream->_LA = antlr3UTF32LA; // Return the UTF32 character at offset n (1 based) + } + else + { + // Need to use methods that know that the input is little endian + // + input->istream->_LA = antlr3UTF32LALE; // Return the UTF32 character at offset n (1 based) + } + break; + + case ANTLR3_FALSE: + + // Machine is Little Endian, if the input is also then install the + // methods that do not access input by bytes and reverse them. + // Otherwise install endian aware methods. + // + if (inputBigEndian == ANTLR3_FALSE) + { + // Input is machine compatible + // + input->istream->_LA = antlr3UTF32LA; // Return the UTF32 character at offset n (1 based) + } + else + { + // Need to use methods that know that the input is Big Endian + // + input->istream->_LA = antlr3UTF32LABE; // Return the UTF32 character at offset n (1 based) + } + break; + } + + input->charByteSize = 4; // Size in bytes of characters in this stream. +} + +/** \brief Consume the next character in a UTF32 input stream + * + * \param input Input stream context pointer + */ +static void +antlr3UTF32Consume(pANTLR3_INT_STREAM is) +{ + pANTLR3_INPUT_STREAM input; + input = ((pANTLR3_INPUT_STREAM) (is->super)); + + // SizeBuf is always in bytes + // + if ((pANTLR3_UINT8)(input->nextChar) < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + /* Indicate one more character in this line + */ + input->charPositionInLine++; + + if ((ANTLR3_UCHAR)(*((pANTLR3_UINT32)input->nextChar)) == input->newlineChar) + { + /* Reset for start of a new line of input + */ + input->line++; + input->charPositionInLine = 0; + input->currentLine = (void *)(((pANTLR3_UINT32)input->nextChar) + 1); + } + + /* Increment to next character position + */ + input->nextChar = (void *)(((pANTLR3_UINT32)input->nextChar) + 1); + } +} + +/// \brief Calculate the current index in the output stream. +/// \param[in] input Input stream context pointer +/// +static ANTLR3_MARKER +antlr3UTF32Index(pANTLR3_INT_STREAM is) +{ + pANTLR3_INPUT_STREAM input; + + input = ((pANTLR3_INPUT_STREAM) (is->super)); + + return (ANTLR3_MARKER)(input->nextChar); +} + +/// \brief Return a substring of the UTF16 input stream in +/// newly allocated memory. +/// +/// \param input Input stream context pointer +/// \param start Offset in input stream where the string starts +/// \param stop Offset in the input stream where the string ends. +/// +static pANTLR3_STRING +antlr3UTF32Substr (pANTLR3_INPUT_STREAM input, ANTLR3_MARKER start, ANTLR3_MARKER stop) +{ + return input->strFactory->newPtr(input->strFactory, (pANTLR3_UINT8)start, ((ANTLR3_UINT32_CAST(stop - start))/4) + 1); +} + +/// \brief Rewind the lexer input to the state specified by the supplied mark. +/// +/// \param[in] input Input stream context pointer +/// +/// \remark +/// Assumes UTF32 input stream. +/// +static void +antlr3UTF32Seek (pANTLR3_INT_STREAM is, ANTLR3_MARKER seekPoint) +{ + pANTLR3_INPUT_STREAM input; + + input = ((pANTLR3_INPUT_STREAM) is->super); + + // If the requested seek point is less than the current + // input point, then we assume that we are resetting from a mark + // and do not need to scan, but can just set to there as rewind will + // reset line numbers and so on. + // + if (seekPoint <= (ANTLR3_MARKER)(input->nextChar)) + { + input->nextChar = (void *)seekPoint; + } + else + { + // Call consume until we reach the asked for seek point or EOF + // + while (is->_LA(is, 1) != ANTLR3_CHARSTREAM_EOF && seekPoint < (ANTLR3_MARKER)input->nextChar) + { + is->consume(is); + } + } +} + +/** \brief Return the input element assuming a UTF32 input in natural machine byte order + * + * \param[in] input Input stream context pointer + * \param[in] la 1 based offset of next input stream element + * + * \return Next input character in internal ANTLR3 encoding (UTF32) + */ +static ANTLR3_UCHAR +antlr3UTF32LA(pANTLR3_INT_STREAM is, ANTLR3_INT32 la) +{ + pANTLR3_INPUT_STREAM input; + + input = ((pANTLR3_INPUT_STREAM) (is->super)); + + if (( ((pANTLR3_UINT8)input->nextChar) + la - 1) >= (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + return ANTLR3_CHARSTREAM_EOF; + } + else + { + return (ANTLR3_UCHAR)(*((pANTLR3_UINT32)input->nextChar + la - 1)); + } +} + +/** \brief Return the input element assuming a UTF32 input in little endian byte order + * + * \param[in] input Input stream context pointer + * \param[in] la 1 based offset of next input stream element + * + * \return Next input character in internal ANTLR3 encoding (UTF32) + */ +static ANTLR3_UCHAR +antlr3UTF32LALE(pANTLR3_INT_STREAM is, ANTLR3_INT32 la) +{ + pANTLR3_INPUT_STREAM input; + + input = ((pANTLR3_INPUT_STREAM) (is->super)); + + if (( ((pANTLR3_UINT8)input->nextChar) + la - 1) >= (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + return ANTLR3_CHARSTREAM_EOF; + } + else + { + ANTLR3_UCHAR c; + + c = (ANTLR3_UCHAR)(*((pANTLR3_UINT32)input->nextChar + la - 1)); + + // Swap Endianess to Big Endian + // + return (c>>24) | ((c<<8) & 0x00FF0000) | ((c>>8) & 0x0000FF00) | (c<<24); + } +} + +/** \brief Return the input element assuming a UTF32 input in big endian byte order + * + * \param[in] input Input stream context pointer + * \param[in] la 1 based offset of next input stream element + * + * \return Next input character in internal ANTLR3 encoding (UTF32) + * \remark This is the same code as LE version but seprated in case there are better optimisations fo rendinan swap + */ +static ANTLR3_UCHAR +antlr3UTF32LABE(pANTLR3_INT_STREAM is, ANTLR3_INT32 la) +{ + pANTLR3_INPUT_STREAM input; + + input = ((pANTLR3_INPUT_STREAM) (is->super)); + + if (( ((pANTLR3_UINT8)input->nextChar) + la - 1) >= (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + return ANTLR3_CHARSTREAM_EOF; + } + else + { + ANTLR3_UCHAR c; + + c = (ANTLR3_UCHAR)(*((pANTLR3_UINT32)input->nextChar + la - 1)); + + // Swap Endianess to Little Endian + // + return (c>>24) | ((c<<8) & 0x00FF0000) | ((c>>8) & 0x0000FF00) | (c<<24); + } +} + + +/// \brief Common function to setup function interface for a UTF8 input stream. +/// +/// \param input Input stream context pointer +/// +void +antlr3UTF8SetupStream (pANTLR3_INPUT_STREAM input) +{ + // Build a string factory for this stream. This is a UTF16 string factory which is a standard + // part of the ANTLR3 string. The string factory is then passed through the whole chain of lexer->parser->tree->treeparser + // and so on. + // + input->strFactory = antlr3StringFactoryNew(input->encoding); + + // Generic API that does not care about endianess. + // + input->istream->consume = antlr3UTF8Consume; // Consume the next UTF32 character in the buffer + input->istream->_LA = antlr3UTF8LA; // Return the UTF32 character at offset n (1 based) + input->charByteSize = 0; // Size in bytes of characters in this stream. +} + +// ------------------------------------------------------ +// Following is from Unicode.org (see antlr3convertutf.c) +// + +/// Index into the table below with the first byte of a UTF-8 sequence to +/// get the number of trailing bytes that are supposed to follow it. +/// Note that *legal* UTF-8 values can't have 4 or 5-bytes. The table is +/// left as-is for anyone who may want to do such conversion, which was +/// allowed in earlier algorithms. +/// +static const ANTLR3_UINT32 trailingBytesForUTF8[256] = { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, 3,3,3,3,3,3,3,3,4,4,4,4,5,5,5,5 +}; + +/// Magic values subtracted from a buffer value during UTF8 conversion. +/// This table contains as many values as there might be trailing bytes +/// in a UTF-8 sequence. +/// +static const UTF32 offsetsFromUTF8[6] = + { 0x00000000UL, 0x00003080UL, 0x000E2080UL, + 0x03C82080UL, 0xFA082080UL, 0x82082080UL + }; + +// End of Unicode.org tables +// ------------------------- + + +/** \brief Consume the next character in a UTF8 input stream + * + * \param input Input stream context pointer + */ +static void +antlr3UTF8Consume(pANTLR3_INT_STREAM is) +{ + pANTLR3_INPUT_STREAM input; + ANTLR3_UINT32 extraBytesToRead; + ANTLR3_UCHAR ch; + pANTLR3_UINT8 nextChar; + + input = ((pANTLR3_INPUT_STREAM) (is->super)); + + nextChar = input->nextChar; + + if (nextChar < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + // Indicate one more character in this line + // + input->charPositionInLine++; + + // Are there more bytes needed to make up the whole thing? + // + extraBytesToRead = trailingBytesForUTF8[*nextChar]; + + if (nextChar + extraBytesToRead >= (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + input->nextChar = (((pANTLR3_UINT8)input->data) + input->sizeBuf); + return; + } + + // Cases deliberately fall through (see note A in antlrconvertutf.c) + // Legal UTF8 is only 4 bytes but 6 bytes could be used in old UTF8 so + // we allow it. + // + ch = 0; + switch (extraBytesToRead) { + case 5: ch += *nextChar++; ch <<= 6; + case 4: ch += *nextChar++; ch <<= 6; + case 3: ch += *nextChar++; ch <<= 6; + case 2: ch += *nextChar++; ch <<= 6; + case 1: ch += *nextChar++; ch <<= 6; + case 0: ch += *nextChar++; + } + + // Magically correct the input value + // + ch -= offsetsFromUTF8[extraBytesToRead]; + if (ch == input->newlineChar) + { + /* Reset for start of a new line of input + */ + input->line++; + input->charPositionInLine = 0; + input->currentLine = (void *)nextChar; + } + + // Update input pointer + // + input->nextChar = nextChar; + } +} +/** \brief Return the input element assuming a UTF8 input + * + * \param[in] input Input stream context pointer + * \param[in] la 1 based offset of next input stream element + * + * \return Next input character in internal ANTLR3 encoding (UTF32) + */ +static ANTLR3_UCHAR +antlr3UTF8LA(pANTLR3_INT_STREAM is, ANTLR3_INT32 la) +{ + pANTLR3_INPUT_STREAM input; + ANTLR3_UINT32 extraBytesToRead; + ANTLR3_UCHAR ch; + pANTLR3_UINT8 nextChar; + + input = ((pANTLR3_INPUT_STREAM) (is->super)); + + nextChar = input->nextChar; + + // Do we need to traverse forwards or backwards? + // - LA(0) is treated as LA(1) and we assume that the nextChar is + // already positioned. + // - LA(n+) ; n>1 means we must traverse forward n-1 characters catering for UTF8 encoding + // - LA(-n) means we must traverse backwards n chracters + // + if (la > 1) { + + // Make sure that we have at least one character left before trying to + // loop through the buffer. + // + if (nextChar < (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + // Now traverse n-1 characters forward + // + while (--la > 0) + { + // Does the next character require trailing bytes? + // If so advance the pointer by that many bytes as well as advancing + // one position for what will be at least a single byte character. + // + nextChar += trailingBytesForUTF8[*nextChar] + 1; + + // Does that calculation take us past the byte length of the buffer? + // + if (nextChar >= (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + return ANTLR3_CHARSTREAM_EOF; + } + } + } + else + { + return ANTLR3_CHARSTREAM_EOF; + } + } + else + { + // LA is negative so we decrease the pointer by n character positions + // + while (nextChar > (pANTLR3_UINT8)input->data && la++ < 0) + { + // Traversing backwards in UTF8 means decermenting by one + // then continuing to decrement while ever a character pattern + // is flagged as being a trailing byte of an encoded code point. + // Trailing UTF8 bytes always start with 10 in binary. We assumne that + // the UTF8 is well formed and do not check boundary conditions + // + nextChar--; + while ((*nextChar & 0xC0) == 0x80) + { + nextChar--; + } + } + } + + // nextChar is now pointing at the UTF8 encoded character that we need to + // decode and return. + // + // Are there more bytes needed to make up the whole thing? + // + extraBytesToRead = trailingBytesForUTF8[*nextChar]; + if (nextChar + extraBytesToRead >= (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + return ANTLR3_CHARSTREAM_EOF; + } + + // Cases deliberately fall through (see note A in antlrconvertutf.c) + // + ch = 0; + switch (extraBytesToRead) { + case 5: ch += *nextChar++; ch <<= 6; + case 4: ch += *nextChar++; ch <<= 6; + case 3: ch += *nextChar++; ch <<= 6; + case 2: ch += *nextChar++; ch <<= 6; + case 1: ch += *nextChar++; ch <<= 6; + case 0: ch += *nextChar++; + } + + // Magically correct the input value + // + ch -= offsetsFromUTF8[extraBytesToRead]; + + return ch; +} + +// EBCDIC to ASCII conversion table +// +// This for EBCDIC EDF04 translated to ISO-8859.1 which is the usually accepted POSIX +// translation and the character tables are published all over the interweb. +// +const ANTLR3_UCHAR e2a[256] = +{ + 0x00, 0x01, 0x02, 0x03, 0x85, 0x09, 0x86, 0x7f, + 0x87, 0x8d, 0x8e, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x8f, 0x0a, 0x08, 0x97, + 0x18, 0x19, 0x9c, 0x9d, 0x1c, 0x1d, 0x1e, 0x1f, + 0x80, 0x81, 0x82, 0x83, 0x84, 0x92, 0x17, 0x1b, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x05, 0x06, 0x07, + 0x90, 0x91, 0x16, 0x93, 0x94, 0x95, 0x96, 0x04, + 0x98, 0x99, 0x9a, 0x9b, 0x14, 0x15, 0x9e, 0x1a, + 0x20, 0xa0, 0xe2, 0xe4, 0xe0, 0xe1, 0xe3, 0xe5, + 0xe7, 0xf1, 0x60, 0x2e, 0x3c, 0x28, 0x2b, 0x7c, + 0x26, 0xe9, 0xea, 0xeb, 0xe8, 0xed, 0xee, 0xef, + 0xec, 0xdf, 0x21, 0x24, 0x2a, 0x29, 0x3b, 0x9f, + 0x2d, 0x2f, 0xc2, 0xc4, 0xc0, 0xc1, 0xc3, 0xc5, + 0xc7, 0xd1, 0x5e, 0x2c, 0x25, 0x5f, 0x3e, 0x3f, + 0xf8, 0xc9, 0xca, 0xcb, 0xc8, 0xcd, 0xce, 0xcf, + 0xcc, 0xa8, 0x3a, 0x23, 0x40, 0x27, 0x3d, 0x22, + 0xd8, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, + 0x68, 0x69, 0xab, 0xbb, 0xf0, 0xfd, 0xfe, 0xb1, + 0xb0, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70, + 0x71, 0x72, 0xaa, 0xba, 0xe6, 0xb8, 0xc6, 0xa4, + 0xb5, 0xaf, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7a, 0xa1, 0xbf, 0xd0, 0xdd, 0xde, 0xae, + 0xa2, 0xa3, 0xa5, 0xb7, 0xa9, 0xa7, 0xb6, 0xbc, + 0xbd, 0xbe, 0xac, 0x5b, 0x5c, 0x5d, 0xb4, 0xd7, + 0xf9, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, + 0x48, 0x49, 0xad, 0xf4, 0xf6, 0xf2, 0xf3, 0xf5, + 0xa6, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, 0x50, + 0x51, 0x52, 0xb9, 0xfb, 0xfc, 0xdb, 0xfa, 0xff, + 0xd9, 0xf7, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, + 0x59, 0x5a, 0xb2, 0xd4, 0xd6, 0xd2, 0xd3, 0xd5, + 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, + 0x38, 0x39, 0xb3, 0x7b, 0xdc, 0x7d, 0xda, 0x7e +}; + +/// \brief Common function to setup function interface for a EBCDIC input stream. +/// +/// \param input Input stream context pointer +/// +void +antlr3EBCDICSetupStream (pANTLR3_INPUT_STREAM input) +{ + // EBCDIC streams can use the standard 8 bit string factory + // + input->strFactory = antlr3StringFactoryNew(input->encoding); + + // Generic API that does not care about endianess. + // + input->istream->_LA = antlr3EBCDICLA; // Return the UTF32 character at offset n (1 based) + input->charByteSize = 1; // Size in bytes of characters in this stream. +} + +/// \brief Return the input element assuming an 8 bit EBCDIC input +/// +/// \param[in] input Input stream context pointer +/// \param[in] la 1 based offset of next input stream element +/// +/// \return Next input character in internal ANTLR3 encoding (UTF32) after translation +/// from EBCDIC to ASCII +/// +static ANTLR3_UCHAR +antlr3EBCDICLA(pANTLR3_INT_STREAM is, ANTLR3_INT32 la) +{ + pANTLR3_INPUT_STREAM input; + + input = ((pANTLR3_INPUT_STREAM) (is->super)); + + if (( ((pANTLR3_UINT8)input->nextChar) + la - 1) >= (((pANTLR3_UINT8)input->data) + input->sizeBuf)) + { + return ANTLR3_CHARSTREAM_EOF; + } + else + { + // Translate the required character via the constant conversion table + // + return e2a[(*((pANTLR3_UINT8)input->nextChar + la - 1))]; + } +} \ No newline at end of file diff -Nru libantlr3c-3.2/src/antlr3lexer.c libantlr3c-3.4+dfsg/src/antlr3lexer.c --- libantlr3c-3.2/src/antlr3lexer.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3lexer.c 2011-06-28 20:41:01.000000000 +0000 @@ -104,7 +104,7 @@ */ if (lexer->rec->state->tokSource == NULL) { - lexer->rec->state->tokSource = (pANTLR3_TOKEN_SOURCE)ANTLR3_MALLOC(sizeof(ANTLR3_TOKEN_SOURCE)); + lexer->rec->state->tokSource = (pANTLR3_TOKEN_SOURCE)ANTLR3_CALLOC(1, sizeof(ANTLR3_TOKEN_SOURCE)); if (lexer->rec->state->tokSource == NULL) { @@ -146,19 +146,28 @@ /* Initialise the eof token */ - specialT = &(lexer->rec->state->tokSource->eofToken); + specialT = &(lexer->rec->state->tokSource->eofToken); antlr3SetTokenAPI (specialT); specialT->setType (specialT, ANTLR3_TOKEN_EOF); - specialT->factoryMade = ANTLR3_TRUE; // Prevent things trying to free() it - specialT->strFactory = NULL; + specialT->factoryMade = ANTLR3_TRUE; // Prevent things trying to free() it + specialT->strFactory = NULL; + specialT->textState = ANTLR3_TEXT_NONE; + specialT->custom = NULL; + specialT->user1 = 0; + specialT->user2 = 0; + specialT->user3 = 0; // Initialize the skip token. // - specialT = &(lexer->rec->state->tokSource->skipToken); + specialT = &(lexer->rec->state->tokSource->skipToken); antlr3SetTokenAPI (specialT); specialT->setType (specialT, ANTLR3_TOKEN_INVALID); - specialT->factoryMade = ANTLR3_TRUE; // Prevent things trying to free() it - specialT->strFactory = NULL; + specialT->factoryMade = ANTLR3_TRUE; // Prevent things trying to free() it + specialT->strFactory = NULL; + specialT->custom = NULL; + specialT->user1 = 0; + specialT->user2 = 0; + specialT->user3 = 0; return lexer; } @@ -169,18 +178,21 @@ lexer = rec->super; - lexer->rec->state->token = NULL; - lexer->rec->state->type = ANTLR3_TOKEN_INVALID; - lexer->rec->state->channel = ANTLR3_TOKEN_DEFAULT_CHANNEL; - lexer->rec->state->tokenStartCharIndex = -1; + lexer->rec->state->token = NULL; + lexer->rec->state->type = ANTLR3_TOKEN_INVALID; + lexer->rec->state->channel = ANTLR3_TOKEN_DEFAULT_CHANNEL; + lexer->rec->state->tokenStartCharIndex = -1; lexer->rec->state->tokenStartCharPositionInLine = -1; - lexer->rec->state->tokenStartLine = -1; + lexer->rec->state->tokenStartLine = -1; - lexer->rec->state->text = NULL; + lexer->rec->state->text = NULL; - if (lexer->input != NULL) + // OK - that's all hunky dory, but we may well have had + // a token factory that needs a reset. Do that here + // + if (lexer->rec->state->tokFactory != NULL) { - lexer->input->istream->seek(lexer->input->istream, 0); + lexer->rec->state->tokFactory->reset(lexer->rec->state->tokFactory); } } @@ -204,87 +216,95 @@ ANTLR3_INLINE static pANTLR3_COMMON_TOKEN nextTokenStr (pANTLR3_TOKEN_SOURCE toksource) { - pANTLR3_LEXER lexer; - - lexer = (pANTLR3_LEXER)(toksource->super); - - /// Loop until we get a non skipped token or EOF - /// - for (;;) - { - // Get rid of any previous token (token factory takes care of - // any de-allocation when this token is finally used up. - // - lexer->rec->state->token = NULL; - lexer->rec->state->error = ANTLR3_FALSE; // Start out without an exception - lexer->rec->state->failed = ANTLR3_FALSE; - - + pANTLR3_LEXER lexer; + pANTLR3_RECOGNIZER_SHARED_STATE state; + pANTLR3_INPUT_STREAM input; + pANTLR3_INT_STREAM istream; + + lexer = (pANTLR3_LEXER)(toksource->super); + state = lexer->rec->state; + input = lexer->input; + istream = input->istream; + + /// Loop until we get a non skipped token or EOF + /// + for (;;) + { + // Get rid of any previous token (token factory takes care of + // any de-allocation when this token is finally used up. + // + state->token = NULL; + state->error = ANTLR3_FALSE; // Start out without an exception + state->failed = ANTLR3_FALSE; - // Now call the matching rules and see if we can generate a new token - // - for (;;) - { + // Now call the matching rules and see if we can generate a new token + // + for (;;) + { // Record the start of the token in our input stream. // - lexer->rec->state->channel = ANTLR3_TOKEN_DEFAULT_CHANNEL; - lexer->rec->state->tokenStartCharIndex = lexer->input->istream->index(lexer->input->istream); - lexer->rec->state->tokenStartCharPositionInLine = lexer->input->getCharPositionInLine(lexer->input); - lexer->rec->state->tokenStartLine = lexer->input->getLine(lexer->input); - lexer->rec->state->text = NULL; - - if (lexer->input->istream->_LA(lexer->input->istream, 1) == ANTLR3_CHARSTREAM_EOF) - { - // Reached the end of the current stream, nothing more to do if this is - // the last in the stack. - // - pANTLR3_COMMON_TOKEN teof = &(toksource->eofToken); - - teof->setStartIndex (teof, lexer->getCharIndex(lexer)); - teof->setStopIndex (teof, lexer->getCharIndex(lexer)); - teof->setLine (teof, lexer->getLine(lexer)); - teof->factoryMade = ANTLR3_TRUE; // This isn't really manufactured but it stops things from trying to free it - return teof; - } - - lexer->rec->state->token = NULL; - lexer->rec->state->error = ANTLR3_FALSE; // Start out without an exception - lexer->rec->state->failed = ANTLR3_FALSE; + state->channel = ANTLR3_TOKEN_DEFAULT_CHANNEL; + state->tokenStartCharIndex = (ANTLR3_MARKER)(((pANTLR3_UINT8)input->nextChar)); + state->tokenStartCharPositionInLine = input->charPositionInLine; + state->tokenStartLine = input->line; + state->text = NULL; + state->custom = NULL; + state->user1 = 0; + state->user2 = 0; + state->user3 = 0; + + if (istream->_LA(istream, 1) == ANTLR3_CHARSTREAM_EOF) + { + // Reached the end of the current stream, nothing more to do if this is + // the last in the stack. + // + pANTLR3_COMMON_TOKEN teof = &(toksource->eofToken); + + teof->setStartIndex (teof, lexer->getCharIndex(lexer)); + teof->setStopIndex (teof, lexer->getCharIndex(lexer)); + teof->setLine (teof, lexer->getLine(lexer)); + teof->factoryMade = ANTLR3_TRUE; // This isn't really manufactured but it stops things from trying to free it + return teof; + } + + state->token = NULL; + state->error = ANTLR3_FALSE; // Start out without an exception + state->failed = ANTLR3_FALSE; - // Call the generated lexer, see if it can get a new token together. - // - lexer->mTokens(lexer->ctx); + // Call the generated lexer, see if it can get a new token together. + // + lexer->mTokens(lexer->ctx); - if (lexer->rec->state->error == ANTLR3_TRUE) - { - // Recognition exception, report it and try to recover. - // - lexer->rec->state->failed = ANTLR3_TRUE; - lexer->rec->reportError(lexer->rec); - lexer->recover(lexer); - } - else - { - if (lexer->rec->state->token == NULL) - { - // Emit the real token, which adds it in to the token stream basically - // - emit(lexer); - } - else if (lexer->rec->state->token == &(toksource->skipToken)) - { - // A real token could have been generated, but "Computer say's naaaaah" and it - // it is just something we need to skip altogether. - // - continue; - } - - // Good token, not skipped, not EOF token - // - return lexer->rec->state->token; - } - } - } + if (state->error == ANTLR3_TRUE) + { + // Recognition exception, report it and try to recover. + // + state->failed = ANTLR3_TRUE; + lexer->rec->reportError(lexer->rec); + lexer->recover(lexer); + } + else + { + if (state->token == NULL) + { + // Emit the real token, which adds it in to the token stream basically + // + emit(lexer); + } + else if (state->token == &(toksource->skipToken)) + { + // A real token could have been generated, but "Computer say's naaaaah" and it + // it is just something we need to skip altogether. + // + continue; + } + + // Good token, not skipped, not EOF token + // + return state->token; + } + } + } } /** @@ -624,16 +644,16 @@ pANTLR3_COMMON_TOKEN token; /* We could check pointers to token factories and so on, but - * we are in code that we want to run as fast as possible - * so we are not checking any errors. So make sure you have installed an input stream before - * trying to emit a new token. - */ + * we are in code that we want to run as fast as possible + * so we are not checking any errors. So make sure you have installed an input stream before + * trying to emit a new token. + */ token = lexer->rec->state->tokFactory->newToken(lexer->rec->state->tokFactory); /* Install the supplied information, and some other bits we already know - * get added automatically, such as the input stream it is associated with - * (though it can all be overridden of course) - */ + * get added automatically, such as the input stream it is associated with + * (though it can all be overridden of course) + */ token->type = lexer->rec->state->type; token->channel = lexer->rec->state->channel; token->start = lexer->rec->state->tokenStartCharIndex; @@ -641,20 +661,20 @@ token->line = lexer->rec->state->tokenStartLine; token->charPosition = lexer->rec->state->tokenStartCharPositionInLine; - if (lexer->rec->state->text != NULL) - { - token->textState = ANTLR3_TEXT_STRING; - token->tokText.text = lexer->rec->state->text; - } - else - { - token->textState = ANTLR3_TEXT_NONE; - } + if (lexer->rec->state->text != NULL) + { + token->textState = ANTLR3_TEXT_STRING; + token->tokText.text = lexer->rec->state->text; + } + else + { + token->textState = ANTLR3_TEXT_NONE; + } token->lineStart = lexer->input->currentLine; - token->user1 = lexer->rec->state->user1; - token->user2 = lexer->rec->state->user2; - token->user3 = lexer->rec->state->user3; - token->custom = lexer->rec->state->custom; + token->user1 = lexer->rec->state->user1; + token->user2 = lexer->rec->state->user2; + token->user3 = lexer->rec->state->user3; + token->custom = lexer->rec->state->custom; lexer->rec->state->token = token; @@ -846,7 +866,7 @@ static ANTLR3_UINT32 getCharPositionInLine (pANTLR3_LEXER lexer) { - return lexer->input->getCharPositionInLine(lexer->input); + return lexer->input->charPositionInLine; } static ANTLR3_MARKER getCharIndex (pANTLR3_LEXER lexer) diff -Nru libantlr3c-3.2/src/antlr3string.c libantlr3c-3.4+dfsg/src/antlr3string.c --- libantlr3c-3.2/src/antlr3string.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3string.c 2011-06-28 20:41:01.000000000 +0000 @@ -36,72 +36,72 @@ /* Factory API */ static pANTLR3_STRING newRaw8 (pANTLR3_STRING_FACTORY factory); -static pANTLR3_STRING newRaw16 (pANTLR3_STRING_FACTORY factory); +static pANTLR3_STRING newRawUTF16 (pANTLR3_STRING_FACTORY factory); static pANTLR3_STRING newSize8 (pANTLR3_STRING_FACTORY factory, ANTLR3_UINT32 size); -static pANTLR3_STRING newSize16 (pANTLR3_STRING_FACTORY factory, ANTLR3_UINT32 size); +static pANTLR3_STRING newSizeUTF16 (pANTLR3_STRING_FACTORY factory, ANTLR3_UINT32 size); static pANTLR3_STRING newPtr8 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 string, ANTLR3_UINT32 size); -static pANTLR3_STRING newPtr16_8 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 string, ANTLR3_UINT32 size); -static pANTLR3_STRING newPtr16_16 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 string, ANTLR3_UINT32 size); +static pANTLR3_STRING newPtrUTF16_8 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 string, ANTLR3_UINT32 size); +static pANTLR3_STRING newPtrUTF16_UTF16 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 string, ANTLR3_UINT32 size); static pANTLR3_STRING newStr8 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 string); -static pANTLR3_STRING newStr16_8 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 string); -static pANTLR3_STRING newStr16_16 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 string); +static pANTLR3_STRING newStrUTF16_8 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 string); +static pANTLR3_STRING newStrUTF16_UTF16 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 string); static void destroy (pANTLR3_STRING_FACTORY factory, pANTLR3_STRING string); static pANTLR3_STRING printable8 (pANTLR3_STRING_FACTORY factory, pANTLR3_STRING string); -static pANTLR3_STRING printable16 (pANTLR3_STRING_FACTORY factory, pANTLR3_STRING string); +static pANTLR3_STRING printableUTF16 (pANTLR3_STRING_FACTORY factory, pANTLR3_STRING string); static void closeFactory(pANTLR3_STRING_FACTORY factory); /* String API */ static pANTLR3_UINT8 set8 (pANTLR3_STRING string, const char * chars); -static pANTLR3_UINT8 set16_8 (pANTLR3_STRING string, const char * chars); -static pANTLR3_UINT8 set16_16 (pANTLR3_STRING string, const char * chars); +static pANTLR3_UINT8 setUTF16_8 (pANTLR3_STRING string, const char * chars); +static pANTLR3_UINT8 setUTF16_UTF16 (pANTLR3_STRING string, const char * chars); static pANTLR3_UINT8 append8 (pANTLR3_STRING string, const char * newbit); -static pANTLR3_UINT8 append16_8 (pANTLR3_STRING string, const char * newbit); -static pANTLR3_UINT8 append16_16 (pANTLR3_STRING string, const char * newbit); +static pANTLR3_UINT8 appendUTF16_8 (pANTLR3_STRING string, const char * newbit); +static pANTLR3_UINT8 appendUTF16_UTF16 (pANTLR3_STRING string, const char * newbit); static pANTLR3_UINT8 insert8 (pANTLR3_STRING string, ANTLR3_UINT32 point, const char * newbit); -static pANTLR3_UINT8 insert16_8 (pANTLR3_STRING string, ANTLR3_UINT32 point, const char * newbit); -static pANTLR3_UINT8 insert16_16 (pANTLR3_STRING string, ANTLR3_UINT32 point, const char * newbit); +static pANTLR3_UINT8 insertUTF16_8 (pANTLR3_STRING string, ANTLR3_UINT32 point, const char * newbit); +static pANTLR3_UINT8 insertUTF16_UTF16 (pANTLR3_STRING string, ANTLR3_UINT32 point, const char * newbit); static pANTLR3_UINT8 setS (pANTLR3_STRING string, pANTLR3_STRING chars); static pANTLR3_UINT8 appendS (pANTLR3_STRING string, pANTLR3_STRING newbit); static pANTLR3_UINT8 insertS (pANTLR3_STRING string, ANTLR3_UINT32 point, pANTLR3_STRING newbit); static pANTLR3_UINT8 addc8 (pANTLR3_STRING string, ANTLR3_UINT32 c); -static pANTLR3_UINT8 addc16 (pANTLR3_STRING string, ANTLR3_UINT32 c); +static pANTLR3_UINT8 addcUTF16 (pANTLR3_STRING string, ANTLR3_UINT32 c); static pANTLR3_UINT8 addi8 (pANTLR3_STRING string, ANTLR3_INT32 i); -static pANTLR3_UINT8 addi16 (pANTLR3_STRING string, ANTLR3_INT32 i); +static pANTLR3_UINT8 addiUTF16 (pANTLR3_STRING string, ANTLR3_INT32 i); static pANTLR3_UINT8 inserti8 (pANTLR3_STRING string, ANTLR3_UINT32 point, ANTLR3_INT32 i); -static pANTLR3_UINT8 inserti16 (pANTLR3_STRING string, ANTLR3_UINT32 point, ANTLR3_INT32 i); +static pANTLR3_UINT8 insertiUTF16 (pANTLR3_STRING string, ANTLR3_UINT32 point, ANTLR3_INT32 i); static ANTLR3_UINT32 compare8 (pANTLR3_STRING string, const char * compStr); -static ANTLR3_UINT32 compare16_8 (pANTLR3_STRING string, const char * compStr); -static ANTLR3_UINT32 compare16_16(pANTLR3_STRING string, const char * compStr); +static ANTLR3_UINT32 compareUTF16_8 (pANTLR3_STRING string, const char * compStr); +static ANTLR3_UINT32 compareUTF16_UTF16(pANTLR3_STRING string, const char * compStr); static ANTLR3_UINT32 compareS (pANTLR3_STRING string, pANTLR3_STRING compStr); static ANTLR3_UCHAR charAt8 (pANTLR3_STRING string, ANTLR3_UINT32 offset); -static ANTLR3_UCHAR charAt16 (pANTLR3_STRING string, ANTLR3_UINT32 offset); +static ANTLR3_UCHAR charAtUTF16 (pANTLR3_STRING string, ANTLR3_UINT32 offset); static pANTLR3_STRING subString8 (pANTLR3_STRING string, ANTLR3_UINT32 startIndex, ANTLR3_UINT32 endIndex); -static pANTLR3_STRING subString16 (pANTLR3_STRING string, ANTLR3_UINT32 startIndex, ANTLR3_UINT32 endIndex); +static pANTLR3_STRING subStringUTF16 (pANTLR3_STRING string, ANTLR3_UINT32 startIndex, ANTLR3_UINT32 endIndex); static ANTLR3_INT32 toInt32_8 (pANTLR3_STRING string); -static ANTLR3_INT32 toInt32_16 (pANTLR3_STRING string); +static ANTLR3_INT32 toInt32_UTF16 (pANTLR3_STRING string); static pANTLR3_STRING to8_8 (pANTLR3_STRING string); -static pANTLR3_STRING to8_16 (pANTLR3_STRING string); +static pANTLR3_STRING to8_UTF16 (pANTLR3_STRING string); static pANTLR3_STRING toUTF8_8 (pANTLR3_STRING string); -static pANTLR3_STRING toUTF8_16 (pANTLR3_STRING string); +static pANTLR3_STRING toUTF8_UTF16 (pANTLR3_STRING string); /* Local helpers */ static void stringInit8 (pANTLR3_STRING string); -static void stringInit16 (pANTLR3_STRING string); +static void stringInitUTF16 (pANTLR3_STRING string); static void ANTLR3_CDECL stringFree (pANTLR3_STRING string); ANTLR3_API pANTLR3_STRING_FACTORY -antlr3StringFactoryNew() +antlr3StringFactoryNew(ANTLR3_UINT32 encoding) { pANTLR3_STRING_FACTORY factory; /* Allocate memory */ - factory = (pANTLR3_STRING_FACTORY) ANTLR3_MALLOC(sizeof(ANTLR3_STRING_FACTORY)); + factory = (pANTLR3_STRING_FACTORY) ANTLR3_CALLOC(1, sizeof(ANTLR3_STRING_FACTORY)); if (factory == NULL) { @@ -119,57 +119,63 @@ return NULL; } - /* Install the API (8 bit assumed) - */ - factory->newRaw = newRaw8; - factory->newSize = newSize8; - - factory->newPtr = newPtr8; - factory->newPtr8 = newPtr8; - factory->newStr = newStr8; - factory->newStr8 = newStr8; - factory->destroy = destroy; - factory->printable = printable8; - factory->destroy = destroy; - factory->close = closeFactory; - + // Install the API + // + // TODO: These encodings need equivalent functions to + // UTF16 and 8Bit if I am going to support those encodings in the STRING stuff. + // The STRING stuff was intended as a quick and dirty hack for people that did not + // want to worry about memory and performance very much, but nobody ever reads the + // notes or comments or uses the email list search. I want to discourage using these + // interfaces as it is much more efficient to use the pointers within the tokens + // directly, so I am not implementing the string stuff for the newer encodings. + // We install the standard 8 and 16 bit functions for the UTF 8 and 16 but they + // will not be useful beyond returning the text. + // + switch(encoding) + { + case ANTLR3_ENC_UTF32: + break; + + case ANTLR3_ENC_UTF32BE: + break; + + case ANTLR3_ENC_UTF32LE: + break; + + case ANTLR3_ENC_UTF16BE: + case ANTLR3_ENC_UTF16LE: + case ANTLR3_ENC_UTF16: + + factory->newRaw = newRawUTF16; + factory->newSize = newSizeUTF16; + factory->newPtr = newPtrUTF16_UTF16; + factory->newPtr8 = newPtrUTF16_8; + factory->newStr = newStrUTF16_UTF16; + factory->newStr8 = newStrUTF16_8; + factory->printable = printableUTF16; + factory->destroy = destroy; + factory->close = closeFactory; + break; + + case ANTLR3_ENC_UTF8: + case ANTLR3_ENC_EBCDIC: + case ANTLR3_ENC_8BIT: + default: + + factory->newRaw = newRaw8; + factory->newSize = newSize8; + factory->newPtr = newPtr8; + factory->newPtr8 = newPtr8; + factory->newStr = newStr8; + factory->newStr8 = newStr8; + factory->printable = printable8; + factory->destroy = destroy; + factory->close = closeFactory; + break; + } return factory; } -/** Create a string factory that is UCS2 (16 bit) encoding based - */ -ANTLR3_API pANTLR3_STRING_FACTORY -antlr3UCS2StringFactoryNew() -{ - pANTLR3_STRING_FACTORY factory; - - /* Allocate an 8 bit factory, then override with 16 bit UCS2 functions where we - * need to. - */ - factory = antlr3StringFactoryNew(); - - if (factory == NULL) - { - return NULL; - } - - /* Override the 8 bit API with the UCS2 (mostly just 16 bit) API - */ - factory->newRaw = newRaw16; - factory->newSize = newSize16; - - factory->newPtr = newPtr16_16; - factory->newPtr8 = newPtr16_8; - factory->newStr = newStr16_16; - factory->newStr8 = newStr16_8; - factory->printable = printable16; - - factory->destroy = destroy; - factory->destroy = destroy; - factory->close = closeFactory; - - return factory; -} /** * @@ -206,7 +212,7 @@ * \return */ static pANTLR3_STRING -newRaw16 (pANTLR3_STRING_FACTORY factory) +newRawUTF16 (pANTLR3_STRING_FACTORY factory) { pANTLR3_STRING string; @@ -219,7 +225,7 @@ /* Structure is allocated, now fill in the API etc. */ - stringInit16(string); + stringInitUTF16(string); string->factory = factory; /* Add the string into the allocated list @@ -256,7 +262,7 @@ string->len = 0; string->size = 0; string->chars = NULL; - string->encoding = ANTLR3_ENCODING_LATIN1; + string->encoding = ANTLR3_ENC_8BIT ; /* API for 8 bit strings*/ @@ -275,7 +281,7 @@ string->subString = subString8; string->toInt32 = toInt32_8; string->to8 = to8_8; - string->toUTF8 = toUTF8_8; + string->toUTF8 = toUTF8_8; string->compareS = compareS; string->setS = setS; string->appendS = appendS; @@ -288,31 +294,31 @@ * \return */ static void -stringInit16 (pANTLR3_STRING string) +stringInitUTF16 (pANTLR3_STRING string) { string->len = 0; string->size = 0; string->chars = NULL; - string->encoding = ANTLR3_ENCODING_UCS2; + string->encoding = ANTLR3_ENC_8BIT; - /* API for 16 bit strings */ + /* API for UTF16 strings */ - string->set = set16_16; - string->set8 = set16_8; - string->append = append16_16; - string->append8 = append16_8; - string->insert = insert16_16; - string->insert8 = insert16_8; - string->addi = addi16; - string->inserti = inserti16; - string->addc = addc16; - string->charAt = charAt16; - string->compare = compare16_16; - string->compare8 = compare16_8; - string->subString = subString16; - string->toInt32 = toInt32_16; - string->to8 = to8_16; - string->toUTF8 = toUTF8_16; + string->set = setUTF16_UTF16; + string->set8 = setUTF16_8; + string->append = appendUTF16_UTF16; + string->append8 = appendUTF16_8; + string->insert = insertUTF16_UTF16; + string->insert8 = insertUTF16_8; + string->addi = addiUTF16; + string->inserti = insertiUTF16; + string->addc = addcUTF16; + string->charAt = charAtUTF16; + string->compare = compareUTF16_UTF16; + string->compare8 = compareUTF16_8; + string->subString = subStringUTF16; + string->toInt32 = toInt32_UTF16; + string->to8 = to8_UTF16; + string->toUTF8 = toUTF8_UTF16; string->compareS = compareS; string->setS = setS; @@ -345,63 +351,63 @@ return string->factory->newPtr(string->factory, (pANTLR3_UINT8)(string->chars), string->len); } -// Convert a 16 bit (UCS2) string into a UTF8 representation using the Unicode.org +// Convert a UTF16 string into a UTF8 representation using the Unicode.org // supplied C algorithms, which are now contained within the ANTLR3 C runtime // as permitted by the Unicode license (within the source code antlr3convertutf.c/.h // UCS2 has the same encoding as UTF16 so we can use UTF16 converter. // static pANTLR3_STRING -toUTF8_16 (pANTLR3_STRING string) +toUTF8_UTF16 (pANTLR3_STRING string) { - - UTF8 * outputEnd; - UTF16 * inputEnd; - pANTLR3_STRING utf8String; - ConversionResult cResult; + UTF8 * outputEnd; + UTF16 * inputEnd; + pANTLR3_STRING utf8String; - // Allocate the output buffer, which needs to accommodate potentially - // 3X (in bytes) the input size (in chars). - // - utf8String = string->factory->newStr8(string->factory, (pANTLR3_UINT8)""); + ConversionResult cResult; - if (utf8String != NULL) - { - // Free existing allocation - // - ANTLR3_FREE(utf8String->chars); - - // Reallocate according to maximum expected size - // - utf8String->size = string->len *3; - utf8String->chars = (pANTLR3_UINT8)ANTLR3_MALLOC(utf8String->size +1); + // Allocate the output buffer, which needs to accommodate potentially + // 3X (in bytes) the input size (in chars). + // + utf8String = string->factory->newStr8(string->factory, (pANTLR3_UINT8)""); - if (utf8String->chars != NULL) - { - inputEnd = (UTF16 *) (string->chars); - outputEnd = (UTF8 *) (utf8String->chars); + if (utf8String != NULL) + { + // Free existing allocation + // + ANTLR3_FREE(utf8String->chars); + + // Reallocate according to maximum expected size + // + utf8String->size = string->len *3; + utf8String->chars = (pANTLR3_UINT8)ANTLR3_MALLOC(utf8String->size +1); - // Call the Unicode converter - // - cResult = ConvertUTF16toUTF8 - ( - (const UTF16**)&inputEnd, - ((const UTF16 *)(string->chars)) + string->len, - &outputEnd, - outputEnd + utf8String->size - 1, - lenientConversion - ); - - // We don't really care if things failed or not here, we just converted - // everything that was vaguely possible and stopped when it wasn't. It is - // up to the grammar programmer to verify that the input is sensible. - // - utf8String->len = ANTLR3_UINT32_CAST(((pANTLR3_UINT8)outputEnd) - utf8String->chars); + if (utf8String->chars != NULL) + { + inputEnd = (UTF16 *) (string->chars); + outputEnd = (UTF8 *) (utf8String->chars); - *(outputEnd+1) = '\0'; // Always null terminate - } - } - return utf8String; + // Call the Unicode converter + // + cResult = ConvertUTF16toUTF8 + ( + (const UTF16**)&inputEnd, + ((const UTF16 *)(string->chars)) + string->len, + &outputEnd, + outputEnd + utf8String->size - 1, + lenientConversion + ); + + // We don't really care if things failed or not here, we just converted + // everything that was vaguely possible and stopped when it wasn't. It is + // up to the grammar programmer to verify that the input is sensible. + // + utf8String->len = ANTLR3_UINT32_CAST(((pANTLR3_UINT8)outputEnd) - utf8String->chars); + + *(outputEnd+1) = '\0'; // Always null terminate + } + } + return utf8String; } /** @@ -420,27 +426,27 @@ if (string == NULL) { - return string; + return string; } /* Always add one more byte for a terminator ;-) - */ - string->chars = (pANTLR3_UINT8) ANTLR3_MALLOC((size_t)(sizeof(ANTLR3_UINT8) * (size+1))); - *(string->chars) = '\0'; - string->size = size + 1; + */ + string->chars = (pANTLR3_UINT8) ANTLR3_MALLOC((size_t)(sizeof(ANTLR3_UINT8) * (size+1))); + *(string->chars) = '\0'; + string->size = size + 1; return string; } /** - * Creates a new string with enough capacity for size 16 bit characters plus a terminator. + * Creates a new string with enough capacity for size UTF16 characters plus a terminator. * - * \param[in] factory - POitner to the string factory that owns strings - * \param[in] size - In characters + * \param[in] factory - Pointer to the string factory that owns strings + * \param[in] size - In characters (count double for surrogate pairs!!!) * \return pointer to the new string. */ static pANTLR3_STRING -newSize16 (pANTLR3_STRING_FACTORY factory, ANTLR3_UINT32 size) +newSizeUTF16 (pANTLR3_STRING_FACTORY factory, ANTLR3_UINT32 size) { pANTLR3_STRING string; @@ -448,14 +454,14 @@ if (string == NULL) { - return string; + return string; } /* Always add one more byte for a terminator ;-) - */ - string->chars = (pANTLR3_UINT8) ANTLR3_MALLOC((size_t)(sizeof(ANTLR3_UINT16) * (size+1))); - *(string->chars) = '\0'; - string->size = size+1; /* Size is always in characters, as is len */ + */ + string->chars = (pANTLR3_UINT8) ANTLR3_MALLOC((size_t)(sizeof(ANTLR3_UINT16) * (size+1))); + *(string->chars) = '\0'; + string->size = size+1; /* Size is always in characters, as is len */ return string; } @@ -493,14 +499,14 @@ return string; } -/** Creates a new 16 bit string initialized with the 8 bit characters at the +/** Creates a new UTF16 string initialized with the 8 bit characters at the * supplied 8 bit character ptr, of pre-determined size. * \param[in] factory - Pointer to the string factory that owns the strings * \param[in] ptr - Pointer to 8 bit encoded characters * \return pointer to the new string */ static pANTLR3_STRING -newPtr16_8 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 ptr, ANTLR3_UINT32 size) +newPtrUTF16_8 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 ptr, ANTLR3_UINT32 size) { pANTLR3_STRING string; @@ -541,14 +547,14 @@ return string; } -/** Creates a new 16 bit string initialized with the 16 bit characters at the +/** Creates a new UTF16 string initialized with the UTF16 characters at the * supplied ptr, of pre-determined size. * \param[in] factory - Pointer to the string factory that owns the strings - * \param[in] ptr - Pointer to 16 bit encoded characters + * \param[in] ptr - Pointer to UTF16 encoded characters * \return pointer to the new string */ static pANTLR3_STRING -newPtr16_16 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 ptr, ANTLR3_UINT32 size) +newPtrUTF16_UTF16 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 ptr, ANTLR3_UINT32 size) { pANTLR3_STRING string; @@ -588,24 +594,24 @@ return factory->newPtr8(factory, ptr, (ANTLR3_UINT32)strlen((const char *)ptr)); } -/** Create a new 16 bit string from the supplied, null terminated, 8 bit string pointer. +/** Create a new UTF16 string from the supplied, null terminated, 8 bit string pointer. * \param[in] factory - Pointer to the string factory that owns strings. * \param[in] ptr - Pointer to the 8 bit encoded string * \return POinter to the newly initialized string */ static pANTLR3_STRING -newStr16_8 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 ptr) +newStrUTF16_8 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 ptr) { return factory->newPtr8(factory, ptr, (ANTLR3_UINT32)strlen((const char *)ptr)); } -/** Create a new 16 bit string from the supplied, null terminated, 16 bit string pointer. +/** Create a new UTF16 string from the supplied, null terminated, UTF16 string pointer. * \param[in] factory - Pointer to the string factory that owns strings. - * \param[in] ptr - Pointer to the 16 bit encoded string + * \param[in] ptr - Pointer to the UTF16 encoded string * \return Pointer to the newly initialized string */ static pANTLR3_STRING -newStr16_16 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 ptr) +newStrUTF16_UTF16 (pANTLR3_STRING_FACTORY factory, pANTLR3_UINT8 ptr) { pANTLR3_UINT16 in; ANTLR3_UINT32 count; @@ -715,7 +721,7 @@ } static pANTLR3_STRING -printable16(pANTLR3_STRING_FACTORY factory, pANTLR3_STRING instr) +printableUTF16(pANTLR3_STRING_FACTORY factory, pANTLR3_STRING instr) { pANTLR3_STRING string; @@ -807,7 +813,7 @@ } static pANTLR3_UINT8 -append16_8 (pANTLR3_STRING string, const char * newbit) +appendUTF16_8 (pANTLR3_STRING string, const char * newbit) { ANTLR3_UINT32 len; pANTLR3_UINT16 apPoint; @@ -834,7 +840,7 @@ } static pANTLR3_UINT8 -append16_16 (pANTLR3_STRING string, const char * newbit) +appendUTF16_UTF16 (pANTLR3_STRING string, const char * newbit) { ANTLR3_UINT32 len; pANTLR3_UINT16 in; @@ -885,7 +891,7 @@ } static pANTLR3_UINT8 -set16_8 (pANTLR3_STRING string, const char * chars) +setUTF16_8 (pANTLR3_STRING string, const char * chars) { ANTLR3_UINT32 len; ANTLR3_UINT32 count; @@ -910,7 +916,7 @@ } static pANTLR3_UINT8 -set16_16 (pANTLR3_STRING string, const char * chars) +setUTF16_UTF16 (pANTLR3_STRING string, const char * chars) { ANTLR3_UINT32 len; pANTLR3_UINT16 in; @@ -956,7 +962,7 @@ } static pANTLR3_UINT8 -addc16 (pANTLR3_STRING string, ANTLR3_UINT32 c) +addcUTF16 (pANTLR3_STRING string, ANTLR3_UINT32 c) { pANTLR3_UINT16 ptr; @@ -984,7 +990,7 @@ return string->append8(string, (const char *)newbit); } static pANTLR3_UINT8 -addi16 (pANTLR3_STRING string, ANTLR3_INT32 i) +addiUTF16 (pANTLR3_STRING string, ANTLR3_INT32 i) { ANTLR3_UINT8 newbit[32]; @@ -1002,7 +1008,7 @@ return string->insert8(string, point, (const char *)newbit); } static pANTLR3_UINT8 -inserti16 (pANTLR3_STRING string, ANTLR3_UINT32 point, ANTLR3_INT32 i) +insertiUTF16 (pANTLR3_STRING string, ANTLR3_UINT32 point, ANTLR3_INT32 i) { ANTLR3_UINT8 newbit[32]; @@ -1047,7 +1053,7 @@ } static pANTLR3_UINT8 -insert16_8 (pANTLR3_STRING string, ANTLR3_UINT32 point, const char * newbit) +insertUTF16_8 (pANTLR3_STRING string, ANTLR3_UINT32 point, const char * newbit) { ANTLR3_UINT32 len; ANTLR3_UINT32 count; @@ -1087,7 +1093,7 @@ } static pANTLR3_UINT8 -insert16_16 (pANTLR3_STRING string, ANTLR3_UINT32 point, const char * newbit) +insertUTF16_UTF16 (pANTLR3_STRING string, ANTLR3_UINT32 point, const char * newbit) { ANTLR3_UINT32 len; pANTLR3_UINT16 in; @@ -1170,7 +1176,7 @@ * a la strcmp() */ static ANTLR3_UINT32 -compare16_8 (pANTLR3_STRING string, const char * compStr) +compareUTF16_8 (pANTLR3_STRING string, const char * compStr) { pANTLR3_UINT16 ourString; ANTLR3_UINT32 charDiff; @@ -1199,7 +1205,7 @@ * a la strcmp() */ static ANTLR3_UINT32 -compare16_16 (pANTLR3_STRING string, const char * compStr8) +compareUTF16_UTF16 (pANTLR3_STRING string, const char * compStr8) { pANTLR3_UINT16 ourString; pANTLR3_UINT16 compStr; @@ -1255,7 +1261,7 @@ * offset as a 32 bit character. */ static ANTLR3_UCHAR -charAt16 (pANTLR3_STRING string, ANTLR3_UINT32 offset) +charAtUTF16 (pANTLR3_STRING string, ANTLR3_UINT32 offset) { if (offset > string->len) { @@ -1288,7 +1294,7 @@ * in java runtimes. */ static pANTLR3_STRING -subString16 (pANTLR3_STRING string, ANTLR3_UINT32 startIndex, ANTLR3_UINT32 endIndex) +subStringUTF16 (pANTLR3_STRING string, ANTLR3_UINT32 startIndex, ANTLR3_UINT32 endIndex) { pANTLR3_STRING newStr; @@ -1312,7 +1318,7 @@ /* Function that can convert the characters in the string to an integer */ static ANTLR3_INT32 -toInt32_16 (struct ANTLR3_STRING_struct * string) +toInt32_UTF16 (struct ANTLR3_STRING_struct * string) { pANTLR3_UINT16 input; ANTLR3_INT32 value; @@ -1352,11 +1358,11 @@ } /* Function that returns an 8 bit version of the string, - * which in this case is returning all the 16 bit characters + * which in this case is returning all the UTF16 characters * narrowed back into 8 bits, with characters that are too large * replaced with '_' */ -static pANTLR3_STRING to8_16 (pANTLR3_STRING string) +static pANTLR3_STRING to8_UTF16 (pANTLR3_STRING string) { pANTLR3_STRING newStr; ANTLR3_UINT32 i; @@ -1376,7 +1382,7 @@ newStr->size = string->len + 1; newStr->len = string->len; - /* Now copy each 16 bit charActer , making it an 8 bit character of + /* Now copy each UTF16 charActer , making it an 8 bit character of * some sort. */ for (i=0; ilen; i++) diff -Nru libantlr3c-3.2/src/antlr3stringstream.c libantlr3c-3.4+dfsg/src/antlr3stringstream.c --- libantlr3c-3.2/src/antlr3stringstream.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3stringstream.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,206 +0,0 @@ -/// \file -/// Provides implementations of string (or memory) streams as input -/// for ANLTR3 lexers. -/// - -// [The "BSD licence"] -// Copyright (c) 2005-2009 Jim Idle, Temporal Wave LLC -// http://www.temporal-wave.com -// http://www.linkedin.com/in/jimidle -// -// All rights reserved. -// -// Redistribution and use in source and binary forms, with or without -// modification, are permitted provided that the following conditions -// are met: -// 1. Redistributions of source code must retain the above copyright -// notice, this list of conditions and the following disclaimer. -// 2. Redistributions in binary form must reproduce the above copyright -// notice, this list of conditions and the following disclaimer in the -// documentation and/or other materials provided with the distribution. -// 3. The name of the author may not be used to endorse or promote products -// derived from this software without specific prior written permission. -// -// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -// OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -// IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -// NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -// THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -#include - -/// \brief Create an in-place ASCII string stream as input to ANTLR 3. -/// -/// An in-place string steam is the preferred method of supplying strings to ANTLR as input -/// for lexing and compiling. This is because we make no copies of the input string but -/// read from it right where it is. -/// -/// \param[in] inString Pointer to the string to be used as the input stream -/// \param[in] size Size (in 8 bit ASCII characters) of the input string -/// \param[in] name NAme to attach the input stream (can be NULL pointer) -/// -/// \return -/// - Pointer to new input stream context upon success -/// - One of the ANTLR3_ERR_ defines on error. -/// -/// \remark -/// - ANTLR does not alter the input string in any way. -/// - String is slightly incorrect in that the passed in pointer can be to any -/// memory in C version of ANTLR3 of course. -//// -ANTLR3_API pANTLR3_INPUT_STREAM -antlr3NewAsciiStringInPlaceStream (pANTLR3_UINT8 inString, ANTLR3_UINT32 size, pANTLR3_UINT8 name) -{ - // Pointer to the input stream we are going to create - // - pANTLR3_INPUT_STREAM input; - - // Allocate memory for the input stream structure - // - input = (pANTLR3_INPUT_STREAM) - ANTLR3_MALLOC(sizeof(ANTLR3_INPUT_STREAM)); - - if (input == NULL) - { - return NULL; - } - - // Structure was allocated correctly, now we can install the pointer. - // - input->isAllocated = ANTLR3_FALSE; - input->data = inString; - input->sizeBuf = size; - - // Call the common 8 bit ASCII input stream handler initializer. - // - antlr3AsciiSetupStream(input, ANTLR3_CHARSTREAM); - - // Now we can set up the file name - // - input->istream->streamName = input->strFactory->newStr(input->strFactory, name == NULL ? (pANTLR3_UINT8)"-memory-" : name); - input->fileName = input->istream->streamName; - - return input; -} - -/// \brief Create an in-place UCS2 string stream as input to ANTLR 3. -/// -/// An in-place string steam is the preferred method of supplying strings to ANTLR as input -/// for lexing and compiling. This is because we make no copies of the input string but -/// read from it right where it is. -/// -/// \param[in] inString Pointer to the string to be used as the input stream -/// \param[in] size Size (in 16 bit ASCII characters) of the input string -/// \param[in] name Name to attach the input stream (can be NULL pointer) -/// -/// \return -/// - Pointer to new input stream context upon success -/// - One of the ANTLR3_ERR_ defines on error. -/// -/// \remark -/// - ANTLR does not alter the input string in any way. -/// - String is slightly incorrect in that the passed in pointer can be to any -/// memory in C version of ANTLR3 of course. -//// -ANTLR3_API pANTLR3_INPUT_STREAM -antlr3NewUCS2StringInPlaceStream (pANTLR3_UINT16 inString, ANTLR3_UINT32 size, pANTLR3_UINT16 name) -{ - // Pointer to the input stream we are going to create - // - pANTLR3_INPUT_STREAM input; - - // Layout default file name string in correct encoding - // - ANTLR3_UINT16 defaultName[] = { '-', 'm', 'e', 'm', 'o', 'r', 'y', '-', '\0' }; - - // Allocate memory for the input stream structure - // - input = (pANTLR3_INPUT_STREAM) - ANTLR3_MALLOC(sizeof(ANTLR3_INPUT_STREAM)); - - if (input == NULL) - { - return NULL; - } - - // Structure was allocated correctly, now we can install the pointer. - // - input->isAllocated = ANTLR3_FALSE; - input->data = inString; - input->sizeBuf = size; - - // Call the common 16 bit input stream handler initializer. - // - antlr3UCS2SetupStream (input, ANTLR3_CHARSTREAM); - - input->istream->streamName = input->strFactory->newStr(input->strFactory, name == NULL ? (pANTLR3_UINT8)defaultName : (pANTLR3_UINT8)name); - input->fileName = input->istream->streamName; - - - return input; -} - -/// \brief Create an ASCII string stream as input to ANTLR 3, copying the input string. -/// -/// This string stream first makes a copy of the string at the supplied pointer -/// -/// \param[in] inString Pointer to the string to be copied as the input stream -/// \param[in] size Size (in 8 bit ASCII characters) of the input string -/// \param[in] name NAme to attach the input stream (can be NULL pointer) -/// -/// \return -/// - Pointer to new input stream context upon success -/// - One of the ANTLR3_ERR_ defines on error. -/// -/// \remark -/// - ANTLR does not alter the input string in any way. -/// - String is slightly incorrect in that the passed in pointer can be to any -/// memory in C version of ANTLR3 of course. -//// -pANTLR3_INPUT_STREAM antlr3NewAsciiStringCopyStream (pANTLR3_UINT8 inString, ANTLR3_UINT32 size, pANTLR3_UINT8 name) -{ - // Pointer to the input stream we are going to create - // - pANTLR3_INPUT_STREAM input; - - // Allocate memory for the input stream structure - // - input = (pANTLR3_INPUT_STREAM) - ANTLR3_MALLOC(sizeof(ANTLR3_INPUT_STREAM)); - - if (input == NULL) - { - return NULL; - } - - // Indicate that we allocated this input and allocate it - // - input->isAllocated = ANTLR3_TRUE; - input->data = ANTLR3_MALLOC((size_t)size); - - if (input->data == NULL) - { - return NULL; - } - - // Structure was allocated correctly, now we can install the pointer and set the size. - // - ANTLR3_MEMMOVE(input->data, (const void *)inString, size); - input->sizeBuf = size; - - // Call the common 8 bit ASCII input stream handler - // initializer type thingy doobry function. - // - antlr3AsciiSetupStream(input, ANTLR3_CHARSTREAM); - - - input->istream->streamName = input->strFactory->newStr(input->strFactory, name == NULL ? (pANTLR3_UINT8)"-memory-" : name); - input->fileName = input->istream->streamName; - - return input; -} diff -Nru libantlr3c-3.2/src/antlr3tokenstream.c libantlr3c-3.4+dfsg/src/antlr3tokenstream.c --- libantlr3c-3.2/src/antlr3tokenstream.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3tokenstream.c 2011-06-22 22:32:16.000000000 +0000 @@ -39,54 +39,55 @@ // COMMON_TOKEN_STREAM API // -static void setTokenTypeChannel (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_UINT32 ttype, ANTLR3_UINT32 channel); -static void discardTokenType (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_INT32 ttype); -static void discardOffChannel (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_BOOLEAN discard); -static pANTLR3_VECTOR getTokens (pANTLR3_COMMON_TOKEN_STREAM cts); -static pANTLR3_LIST getTokenRange (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_UINT32 start, ANTLR3_UINT32 stop); -static pANTLR3_LIST getTokensSet (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_UINT32 start, ANTLR3_UINT32 stop, pANTLR3_BITSET types); -static pANTLR3_LIST getTokensList (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_UINT32 start, ANTLR3_UINT32 stop, pANTLR3_LIST list); -static pANTLR3_LIST getTokensType (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_UINT32 start, ANTLR3_UINT32 stop, ANTLR3_UINT32 type); +static void setTokenTypeChannel (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_UINT32 ttype, ANTLR3_UINT32 channel); +static void discardTokenType (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_INT32 ttype); +static void discardOffChannel (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_BOOLEAN discard); +static pANTLR3_VECTOR getTokens (pANTLR3_COMMON_TOKEN_STREAM cts); +static pANTLR3_LIST getTokenRange (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_UINT32 start, ANTLR3_UINT32 stop); +static pANTLR3_LIST getTokensSet (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_UINT32 start, ANTLR3_UINT32 stop, pANTLR3_BITSET types); +static pANTLR3_LIST getTokensList (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_UINT32 start, ANTLR3_UINT32 stop, pANTLR3_LIST list); +static pANTLR3_LIST getTokensType (pANTLR3_COMMON_TOKEN_STREAM cts, ANTLR3_UINT32 start, ANTLR3_UINT32 stop, ANTLR3_UINT32 type); +static void reset (pANTLR3_COMMON_TOKEN_STREAM cts); // TOKEN_STREAM API // -static pANTLR3_COMMON_TOKEN tokLT (pANTLR3_TOKEN_STREAM ts, ANTLR3_INT32 k); -static pANTLR3_COMMON_TOKEN dbgTokLT (pANTLR3_TOKEN_STREAM ts, ANTLR3_INT32 k); -static pANTLR3_COMMON_TOKEN get (pANTLR3_TOKEN_STREAM ts, ANTLR3_UINT32 i); -static pANTLR3_TOKEN_SOURCE getTokenSource (pANTLR3_TOKEN_STREAM ts); -static void setTokenSource (pANTLR3_TOKEN_STREAM ts, pANTLR3_TOKEN_SOURCE tokenSource); -static pANTLR3_STRING toString (pANTLR3_TOKEN_STREAM ts); -static pANTLR3_STRING toStringSS (pANTLR3_TOKEN_STREAM ts, ANTLR3_UINT32 start, ANTLR3_UINT32 stop); -static pANTLR3_STRING toStringTT (pANTLR3_TOKEN_STREAM ts, pANTLR3_COMMON_TOKEN start, pANTLR3_COMMON_TOKEN stop); -static void setDebugListener (pANTLR3_TOKEN_STREAM ts, pANTLR3_DEBUG_EVENT_LISTENER debugger); +static pANTLR3_COMMON_TOKEN tokLT (pANTLR3_TOKEN_STREAM ts, ANTLR3_INT32 k); +static pANTLR3_COMMON_TOKEN dbgTokLT (pANTLR3_TOKEN_STREAM ts, ANTLR3_INT32 k); +static pANTLR3_COMMON_TOKEN get (pANTLR3_TOKEN_STREAM ts, ANTLR3_UINT32 i); +static pANTLR3_TOKEN_SOURCE getTokenSource (pANTLR3_TOKEN_STREAM ts); +static void setTokenSource (pANTLR3_TOKEN_STREAM ts, pANTLR3_TOKEN_SOURCE tokenSource); +static pANTLR3_STRING toString (pANTLR3_TOKEN_STREAM ts); +static pANTLR3_STRING toStringSS (pANTLR3_TOKEN_STREAM ts, ANTLR3_UINT32 start, ANTLR3_UINT32 stop); +static pANTLR3_STRING toStringTT (pANTLR3_TOKEN_STREAM ts, pANTLR3_COMMON_TOKEN start, pANTLR3_COMMON_TOKEN stop); +static void setDebugListener (pANTLR3_TOKEN_STREAM ts, pANTLR3_DEBUG_EVENT_LISTENER debugger); // INT STREAM API // -static void consume (pANTLR3_INT_STREAM is); -static void dbgConsume (pANTLR3_INT_STREAM is); -static ANTLR3_UINT32 _LA (pANTLR3_INT_STREAM is, ANTLR3_INT32 i); -static ANTLR3_UINT32 dbgLA (pANTLR3_INT_STREAM is, ANTLR3_INT32 i); -static ANTLR3_MARKER mark (pANTLR3_INT_STREAM is); -static ANTLR3_MARKER dbgMark (pANTLR3_INT_STREAM is); -static void release (pANTLR3_INT_STREAM is, ANTLR3_MARKER mark); -static ANTLR3_UINT32 size (pANTLR3_INT_STREAM is); -static ANTLR3_MARKER tindex (pANTLR3_INT_STREAM is); -static void rewindStream (pANTLR3_INT_STREAM is, ANTLR3_MARKER marker); -static void dbgRewindStream (pANTLR3_INT_STREAM is, ANTLR3_MARKER marker); -static void rewindLast (pANTLR3_INT_STREAM is); -static void dbgRewindLast (pANTLR3_INT_STREAM is); -static void seek (pANTLR3_INT_STREAM is, ANTLR3_MARKER index); -static void dbgSeek (pANTLR3_INT_STREAM is, ANTLR3_MARKER index); -static pANTLR3_STRING getSourceName (pANTLR3_INT_STREAM is); -static void antlr3TokenStreamFree (pANTLR3_TOKEN_STREAM stream); -static void antlr3CTSFree (pANTLR3_COMMON_TOKEN_STREAM stream); +static void consume (pANTLR3_INT_STREAM is); +static void dbgConsume (pANTLR3_INT_STREAM is); +static ANTLR3_UINT32 _LA (pANTLR3_INT_STREAM is, ANTLR3_INT32 i); +static ANTLR3_UINT32 dbgLA (pANTLR3_INT_STREAM is, ANTLR3_INT32 i); +static ANTLR3_MARKER mark (pANTLR3_INT_STREAM is); +static ANTLR3_MARKER dbgMark (pANTLR3_INT_STREAM is); +static void release (pANTLR3_INT_STREAM is, ANTLR3_MARKER mark); +static ANTLR3_UINT32 size (pANTLR3_INT_STREAM is); +static ANTLR3_MARKER tindex (pANTLR3_INT_STREAM is); +static void rewindStream (pANTLR3_INT_STREAM is, ANTLR3_MARKER marker); +static void dbgRewindStream (pANTLR3_INT_STREAM is, ANTLR3_MARKER marker); +static void rewindLast (pANTLR3_INT_STREAM is); +static void dbgRewindLast (pANTLR3_INT_STREAM is); +static void seek (pANTLR3_INT_STREAM is, ANTLR3_MARKER index); +static void dbgSeek (pANTLR3_INT_STREAM is, ANTLR3_MARKER index); +static pANTLR3_STRING getSourceName (pANTLR3_INT_STREAM is); +static void antlr3TokenStreamFree (pANTLR3_TOKEN_STREAM stream); +static void antlr3CTSFree (pANTLR3_COMMON_TOKEN_STREAM stream); // Helpers // -static void fillBuffer (pANTLR3_COMMON_TOKEN_STREAM tokenStream); -static ANTLR3_UINT32 skipOffTokenChannels (pANTLR3_COMMON_TOKEN_STREAM tokenStream, ANTLR3_INT32 i); -static ANTLR3_UINT32 skipOffTokenChannelsReverse (pANTLR3_COMMON_TOKEN_STREAM tokenStream, ANTLR3_INT32 i); -static pANTLR3_COMMON_TOKEN LB (pANTLR3_COMMON_TOKEN_STREAM tokenStream, ANTLR3_INT32 i); +static void fillBuffer (pANTLR3_COMMON_TOKEN_STREAM tokenStream); +static ANTLR3_UINT32 skipOffTokenChannels (pANTLR3_COMMON_TOKEN_STREAM tokenStream, ANTLR3_INT32 i); +static ANTLR3_UINT32 skipOffTokenChannelsReverse (pANTLR3_COMMON_TOKEN_STREAM tokenStream, ANTLR3_INT32 i); +static pANTLR3_COMMON_TOKEN LB (pANTLR3_COMMON_TOKEN_STREAM tokenStream, ANTLR3_INT32 i); ANTLR3_API pANTLR3_TOKEN_STREAM antlr3TokenStreamNew() @@ -155,6 +156,52 @@ ANTLR3_FREE(stream); } +// Reset a token stream so it can be used again and can reuse it's +// resources. +// +static void +reset (pANTLR3_COMMON_TOKEN_STREAM cts) +{ + + // Free any resources that ar most like specifc to the + // run we just did. + // + if (cts->discardSet != NULL) + { + cts->discardSet->free(cts->discardSet); + cts->discardSet = NULL; + } + if (cts->channelOverrides != NULL) + { + cts->channelOverrides->free(cts->channelOverrides); + cts->channelOverrides = NULL; + } + + // Now, if there were any existing tokens in the stream, + // then we just reset the vector count so that it starts + // again. We must traverse the entries unfortunately as + // there may be free pointers for custom token types and + // so on. However that is just a quick NULL check on the + // vector entries. + // + if (cts->tokens != NULL) + { + cts->tokens->clear(cts->tokens); + } + else + { + /* Install the token tracking tables + */ + cts->tokens = antlr3VectorNew(0); + } + + // Reset to defaults + // + cts->discardOffChannel = ANTLR3_FALSE; + cts->channel = ANTLR3_TOKEN_DEFAULT_CHANNEL; + cts->p = -1; +} + ANTLR3_API pANTLR3_COMMON_TOKEN_STREAM antlr3CommonTokenDebugStreamSourceNew(ANTLR3_UINT32 hint, pANTLR3_TOKEN_SOURCE source, pANTLR3_DEBUG_EVENT_LISTENER debugger) { @@ -238,25 +285,26 @@ /* Install the common token stream API */ - stream->setTokenTypeChannel = setTokenTypeChannel; - stream->discardTokenType = discardTokenType; - stream->discardOffChannelToks = discardOffChannel; - stream->getTokens = getTokens; - stream->getTokenRange = getTokenRange; - stream->getTokensSet = getTokensSet; - stream->getTokensList = getTokensList; - stream->getTokensType = getTokensType; + stream->setTokenTypeChannel = setTokenTypeChannel; + stream->discardTokenType = discardTokenType; + stream->discardOffChannelToks = discardOffChannel; + stream->getTokens = getTokens; + stream->getTokenRange = getTokenRange; + stream->getTokensSet = getTokensSet; + stream->getTokensList = getTokensList; + stream->getTokensType = getTokensType; + stream->reset = reset; /* Install the token stream API */ - stream->tstream->_LT = tokLT; - stream->tstream->get = get; - stream->tstream->getTokenSource = getTokenSource; - stream->tstream->setTokenSource = setTokenSource; - stream->tstream->toString = toString; - stream->tstream->toStringSS = toStringSS; - stream->tstream->toStringTT = toStringTT; - stream->tstream->setDebugListener = setDebugListener; + stream->tstream->_LT = tokLT; + stream->tstream->get = get; + stream->tstream->getTokenSource = getTokenSource; + stream->tstream->setTokenSource = setTokenSource; + stream->tstream->toString = toString; + stream->tstream->toStringSS = toStringSS; + stream->tstream->toStringTT = toStringTT; + stream->tstream->setDebugListener = setDebugListener; /* Install INT_STREAM interface */ @@ -269,7 +317,7 @@ stream->tstream->istream->rewindLast= rewindLast; stream->tstream->istream->seek = seek; stream->tstream->istream->consume = consume; - stream->tstream->istream->getSourceName = getSourceName; + stream->tstream->istream->getSourceName = getSourceName; return stream; } @@ -309,7 +357,7 @@ cts = (pANTLR3_COMMON_TOKEN_STREAM)ts->super; - if (k < 0) + if (k < 0) { return LB(cts, -k); } @@ -318,10 +366,11 @@ { fillBuffer(cts); } - if (k == 0) - { - return NULL; - } + + // Here we used to check for k == 0 and return 0, but this seems + // a superfluous check to me. LT(k=0) is therefore just undefined + // and we won't waste the clock cycles on the check + // if ((cts->p + k - 1) >= (ANTLR3_INT32)ts->istream->cachedSize) { @@ -352,8 +401,8 @@ return teof; } - // Here the token must be in the input vector. Rather then incut - // function call penalty, we jsut return the pointer directly + // Here the token must be in the input vector. Rather then incur + // function call penalty, we just return the pointer directly // from the vector // return (pANTLR3_COMMON_TOKEN)cts->tokens->elements[i].element; @@ -556,7 +605,7 @@ ts = (pANTLR3_TOKEN_STREAM) is->super; cts = (pANTLR3_COMMON_TOKEN_STREAM) ts->super; - if ((ANTLR3_UINT32)cts->p < cts->tokens->size(cts->tokens)) + if ((ANTLR3_UINT32)cts->p < cts->tokens->count) { cts->p++; cts->p = skipOffTokenChannels(cts, cts->p); diff -Nru libantlr3c-3.2/src/antlr3ucs2inputstream.c libantlr3c-3.4+dfsg/src/antlr3ucs2inputstream.c --- libantlr3c-3.2/src/antlr3ucs2inputstream.c 2009-12-11 22:54:59.000000000 +0000 +++ libantlr3c-3.4+dfsg/src/antlr3ucs2inputstream.c 1970-01-01 00:00:00.000000000 +0000 @@ -1,202 +0,0 @@ -/// \file -/// Base functions to initialize and manipulate a UCS2 input stream -/// -#include - -// [The "BSD licence"] -// Copyright (c) 2005-2009 Jim Idle, Temporal Wave LLC -// http://www.temporal-wave.com -// http://www.linkedin.com/in/jimidle -// -// All rights reserved. -// -// Redistribution and use in source and binary forms, with or without -// modification, are permitted provided that the following conditions -// are met: -// 1. Redistributions of source code must retain the above copyright -// notice, this list of conditions and the following disclaimer. -// 2. Redistributions in binary form must reproduce the above copyright -// notice, this list of conditions and the following disclaimer in the -// documentation and/or other materials provided with the distribution. -// 3. The name of the author may not be used to endorse or promote products -// derived from this software without specific prior written permission. -// -// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -// OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -// IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -// NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -// THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -// INT Stream API -// -static void antlr3UCS2Consume (pANTLR3_INT_STREAM is); -static ANTLR3_UCHAR antlr3UCS2LA (pANTLR3_INT_STREAM is, ANTLR3_INT32 la); -static ANTLR3_MARKER antlr3UCS2Index (pANTLR3_INT_STREAM is); -static void antlr3UCS2Seek (pANTLR3_INT_STREAM is, ANTLR3_MARKER seekPoint); - -// ucs2 Charstream API functions -// -static pANTLR3_STRING antlr3UCS2Substr (pANTLR3_INPUT_STREAM input, ANTLR3_MARKER start, ANTLR3_MARKER stop); - -/// \brief Common function to setup function interface for a 16 bit "UCS2" input stream. -/// -/// \param input Input stream context pointer -/// -/// \remark -/// - Strictly speaking, there is no such thing as a UCS2 input stream as the term -/// tends to confuse the notions of character encoding, unicode and so on. However -/// because there will possibly be a need for a UTF-16 stream, I needed to identify 16 bit -/// streams that do not support surrogate encodings and UCS2 is how it is mostly referred to. -/// For instance Java, Oracle and others use a 16 bit encoding of characters and so this type -/// of stream is very common. -/// Take it to mean, therefore, a straight 16 bit uncomplicated encoding of Unicode code points. -/// -void -antlr3UCS2SetupStream (pANTLR3_INPUT_STREAM input, ANTLR3_UINT32 type) -{ - // Build a string factory for this stream. This is a 16 bit string "UCS2" factory which is a standard - // part of the ANTLR3 string. The string factory is then passed through the whole chain of lexer->parser->tree->treeparser - // and so on. - // - input->strFactory = antlr3UCS2StringFactoryNew(); - - // Install function pointers for an 8 bit ASCII input, which are good for almost - // all input stream functions. We will then override those that won't work for 16 bit characters. - // - antlr3GenericSetupStream (input, type); - - // Intstream API overrides for UCS2 - // - input->istream->consume = antlr3UCS2Consume; // Consume the next 16 bit character in the buffer - input->istream->_LA = antlr3UCS2LA; // Return the UTF32 character at offset n (1 based) - input->istream->index = antlr3UCS2Index; // Calculate current index in input stream, 16 bit based - input->istream->seek = antlr3UCS2Seek; // How to seek to a specific point in the stream - - // Charstream API overrides for UCS2 - // - input->substr = antlr3UCS2Substr; // Return a string from the input stream - - input->charByteSize = 2; // Size in bytes of characters in this stream. - -} - -/// \brief Consume the next character in an 8 bit ASCII input stream -/// -/// \param input Input stream context pointer -/// -static void -antlr3UCS2Consume(pANTLR3_INT_STREAM is) -{ - pANTLR3_INPUT_STREAM input; - - input = ((pANTLR3_INPUT_STREAM) (is->super)); - - if ((pANTLR3_UINT16)(input->nextChar) < (((pANTLR3_UINT16)input->data) + input->sizeBuf)) - { - // Indicate one more character in this line - // - input->charPositionInLine++; - - if ((ANTLR3_UCHAR)(*((pANTLR3_UINT16)input->nextChar)) == input->newlineChar) - { - // Reset for start of a new line of input - // - input->line++; - input->charPositionInLine = 0; - input->currentLine = (void *)(((pANTLR3_UINT16)input->nextChar) + 1); - } - - // Increment to next character position - // - input->nextChar = (void *)(((pANTLR3_UINT16)input->nextChar) + 1); - } -} - -/// \brief Return the input element assuming an 8 bit ascii input -/// -/// \param[in] input Input stream context pointer -/// \param[in] la 1 based offset of next input stream element -/// -/// \return Next input character in internal ANTLR3 encoding (UTF32) -/// -static ANTLR3_UCHAR -antlr3UCS2LA(pANTLR3_INT_STREAM is, ANTLR3_INT32 la) -{ - pANTLR3_INPUT_STREAM input; - - input = ((pANTLR3_INPUT_STREAM) (is->super)); - - if (( ((pANTLR3_UINT16)input->nextChar) + la - 1) >= (((pANTLR3_UINT16)input->data) + input->sizeBuf)) - { - return ANTLR3_CHARSTREAM_EOF; - } - else - { - return (ANTLR3_UCHAR)(*((pANTLR3_UINT16)input->nextChar + la - 1)); - } -} - - -/// \brief Calculate the current index in the output stream. -/// \param[in] input Input stream context pointer -/// -static ANTLR3_MARKER -antlr3UCS2Index(pANTLR3_INT_STREAM is) -{ - pANTLR3_INPUT_STREAM input; - - input = ((pANTLR3_INPUT_STREAM) (is->super)); - - return (ANTLR3_MARKER)(input->nextChar); -} - -/// \brief Rewind the lexer input to the state specified by the supplied mark. -/// -/// \param[in] input Input stream context pointer -/// -/// \remark -/// Assumes ASCII (or at least, 8 Bit) input stream. -/// -static void -antlr3UCS2Seek (pANTLR3_INT_STREAM is, ANTLR3_MARKER seekPoint) -{ - ANTLR3_INT32 count; - pANTLR3_INPUT_STREAM input; - - input = ((pANTLR3_INPUT_STREAM) is->super); - - // If the requested seek point is less than the current - // input point, then we assume that we are resetting from a mark - // and do not need to scan, but can just set to there. - // - if (seekPoint <= (ANTLR3_MARKER)(input->nextChar)) - { - input->nextChar = (void *)seekPoint; - } - else - { - count = (ANTLR3_UINT32)((seekPoint - (ANTLR3_MARKER)(input->nextChar)) / 2); // 16 bits per character in UCS2 - - while (count--) - { - is->consume(is); - } - } -} -/// \brief Return a substring of the ucs2 (16 bit) input stream in -/// newly allocated memory. -/// -/// \param input Input stream context pointer -/// \param start Offset in input stream where the string starts -/// \param stop Offset in the input stream where the string ends. -/// -static pANTLR3_STRING -antlr3UCS2Substr (pANTLR3_INPUT_STREAM input, ANTLR3_MARKER start, ANTLR3_MARKER stop) -{ - return input->strFactory->newPtr(input->strFactory, (pANTLR3_UINT8)start, ((ANTLR3_UINT32_CAST(stop - start))/2) + 1); -}