diff -Nru libconfig-any-perl-0.32/Changes libconfig-any-perl-0.33/Changes --- libconfig-any-perl-0.32/Changes 2017-04-23 21:51:15.000000000 +0000 +++ libconfig-any-perl-0.33/Changes 2023-05-03 15:21:17.000000000 +0000 @@ -1,5 +1,13 @@ Revision history for Config-Any +0.33 - 2023-05-03 + - update docs describe which modules are needed for which formats + - update Config::General requirement for conf files to a non-broken + version (2.48) + - don't try to upgrade old Config::General versions + - fix is_supported method verifying the version of required modules + - documentation cleanups + 0.32 - 2017-04-23 - allow YAML::Syck to fail its error tests - improved diagnostics in YAML test diff -Nru libconfig-any-perl-0.32/debian/changelog libconfig-any-perl-0.33/debian/changelog --- libconfig-any-perl-0.32/debian/changelog 2022-11-19 17:39:50.000000000 +0000 +++ libconfig-any-perl-0.33/debian/changelog 2023-06-26 16:45:45.000000000 +0000 @@ -1,3 +1,23 @@ +libconfig-any-perl (0.33-1) unstable; urgency=medium + + * Import upstream version 0.33. + * Update debian/upstream/metadata. + * Remove libxml-namespacesupport-perl as an alternative to + libxml-simple-perl. + It is needed in addition to libxml-simple-perl, and luckilcy this package + depends on it. + Also remove libxml-namespacesupport-perl from Build-Depends-Indep. + * debian/control: explain which of the packages in Recommends are + needing for which config file types. + * Cleanup alternatives in Build-Depends-Indep, Depends, Recommends. + * Update years of upstream and packaging copyright, + and Upstream-Contact. + * Declare compliance with Debian Policy 4.6.2. + * Set Rules-Requires-Root: no. + * Annotate test-only build dependencies with . + + -- gregor herrmann Mon, 26 Jun 2023 18:45:45 +0200 + libconfig-any-perl (0.32-3) unstable; urgency=medium [ Debian Janitor ] diff -Nru libconfig-any-perl-0.32/debian/control libconfig-any-perl-0.33/debian/control --- libconfig-any-perl-0.32/debian/control 2022-11-19 17:39:50.000000000 +0000 +++ libconfig-any-perl-0.33/debian/control 2023-06-26 16:45:45.000000000 +0000 @@ -8,35 +8,35 @@ Testsuite: autopkgtest-pkg-perl Priority: optional Build-Depends: debhelper-compat (= 13) -Build-Depends-Indep: libconfig-general-perl, - libconfig-tiny-perl, - libcpanel-json-xs-perl, - libjson-maybexs-perl, - libjson-perl, - libjson-pp-perl, - libjson-xs-perl, - libmodule-pluggable-perl | perl (<< 5.17.0), - libtest-exception-perl, - libxml-namespacesupport-perl, - libxml-simple-perl, - libyaml-libyaml-perl, - libyaml-perl, - libyaml-syck-perl, +Build-Depends-Indep: libconfig-general-perl , + libconfig-tiny-perl , + libcpanel-json-xs-perl , + libjson-maybexs-perl , + libjson-perl , + libjson-pp-perl , + libjson-xs-perl , + libmodule-pluggable-perl , + libtest-exception-perl , + libxml-simple-perl , + libyaml-libyaml-perl , + libyaml-perl , + libyaml-syck-perl , perl -Standards-Version: 3.9.8 +Standards-Version: 4.6.2 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libconfig-any-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libconfig-any-perl.git Homepage: https://metacpan.org/release/Config-Any +Rules-Requires-Root: no Package: libconfig-any-perl Architecture: all -Depends: libmodule-pluggable-perl | perl:any (<< 5.17.0), - ${misc:Depends}, - ${perl:Depends} +Depends: ${misc:Depends}, + ${perl:Depends}, + libmodule-pluggable-perl Recommends: libconfig-general-perl, libconfig-tiny-perl, - libcpanel-json-xs-perl | libjson-maybexs-perl | libjson-xs-perl | perl | libjson-pp-perl | libjson-perl, - libxml-simple-perl | libxml-namespacesupport-perl, + libcpanel-json-xs-perl | libjson-maybexs-perl | libjson-xs-perl | libjson-pp-perl | libjson-perl, + libxml-simple-perl, libyaml-libyaml-perl | libyaml-syck-perl | libyaml-perl Description: module to load configuration from different file formats Config::Any provides a facility for Perl applications and libraries to load @@ -51,3 +51,16 @@ loader allows different users to make different choices, without generating extra work for the developers. As a developer you only need to learn a single interface to be able to use the power of different configuration formats. + . + Modules/packages (in Recommends) needed for specific file formats: + . + * ".cnf", ".conf" files: Config::General / libconfig-general-perl + * ".ini" files: Config::Tiny / libconfig-tiny-perl + * ".json", ".jsn" files: Cpanel::JSON::XS, JSON::MaybeXS, JSON::DWIW, + JSON::XS, JSON::Syck, JSON::PP, JSON / libcpanel-json-xs-perl or + libjson-maybexs-perl or libjson-xs-perl or libjson-pp-perl (also provided + by perl) or libjson-perl + * ".pl", ".perl" files: no additional requirements + * ".xml" files: XML::Simple / libxml-simple-perl + * ".yml", ".yaml" files: YAML::XS, YAML::Syck, YAML / libyaml-libyaml-perl + or libyaml-syck-perl or libyaml-perl diff -Nru libconfig-any-perl-0.32/debian/copyright libconfig-any-perl-0.33/debian/copyright --- libconfig-any-perl-0.32/debian/copyright 2022-11-19 17:39:50.000000000 +0000 +++ libconfig-any-perl-0.33/debian/copyright 2023-06-26 16:45:45.000000000 +0000 @@ -1,10 +1,10 @@ Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ Upstream-Name: Config-Any -Upstream-Contact: Joel Bernstein +Upstream-Contact: Graham Knop Source: https://metacpan.org/release/Config-Any Files: * -Copyright: 2007, Joel Bernstein +Copyright: 2007-2023, Joel Bernstein 2006, Portugal Telecom License: Artistic or GPL-1+ @@ -33,7 +33,7 @@ 2008, Ansgar Burchardt 2008, Gunnar Wolf 2008, Rene Mayorga - 2007-2017, gregor herrmann + 2007-2023, gregor herrmann 2007, Damyan Ivanov 2006-2007, Krzysztof Krzyzaniak (eloy) License: Artistic or GPL-1+ diff -Nru libconfig-any-perl-0.32/debian/upstream/metadata libconfig-any-perl-0.33/debian/upstream/metadata --- libconfig-any-perl-0.32/debian/upstream/metadata 2022-11-19 17:39:50.000000000 +0000 +++ libconfig-any-perl-0.33/debian/upstream/metadata 2023-06-26 16:45:45.000000000 +0000 @@ -1,5 +1,6 @@ --- Archive: CPAN Bug-Database: https://rt.cpan.org/Public/Dist/Display.html?Name=Config-Any -Repository: git://git.shadowcat.co.uk/p5sagit/Config-Any.git -Repository-Browse: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?p=p5sagit/Config-Any.git;a=summary +Bug-Submit: bug-Config-Any@rt.cpan.org +Repository: https://github.com/p5sagit/Config-Any.git +Repository-Browse: https://github.com/p5sagit/Config-Any diff -Nru libconfig-any-perl-0.32/lib/Config/Any/Base.pm libconfig-any-perl-0.33/lib/Config/Any/Base.pm --- libconfig-any-perl-0.32/lib/Config/Any/Base.pm 2017-04-09 14:12:40.000000000 +0000 +++ libconfig-any-perl-0.33/lib/Config/Any/Base.pm 2023-05-03 15:21:01.000000000 +0000 @@ -60,7 +60,7 @@ my ( $module, $version ) = ( ref $input ? @$input : $input ); (my $file = "$module.pm") =~ s{::}{/}g; require $file; - $module->VERSION if $version; + $module->VERSION($version) if $version; } =head1 AUTHOR diff -Nru libconfig-any-perl-0.32/lib/Config/Any/General.pm libconfig-any-perl-0.33/lib/Config/Any/General.pm --- libconfig-any-perl-0.32/lib/Config/Any/General.pm 2017-04-09 14:16:00.000000000 +0000 +++ libconfig-any-perl-0.33/lib/Config/Any/General.pm 2020-04-15 11:19:38.000000000 +0000 @@ -48,7 +48,7 @@ $args->{ -ConfigFile } = $file; require Config::General; - Config::General->VERSION( '2.47' ); + Config::General->VERSION( '2.48' ); $args->{ -ForceArray } = 1 unless exists $args->{ -ForceArray }; @@ -64,7 +64,7 @@ =cut -sub requires_all_of { [ 'Config::General' => '2.47' ] } +sub requires_all_of { [ 'Config::General' => '2.48' ] } =head1 AUTHOR diff -Nru libconfig-any-perl-0.32/lib/Config/Any.pm libconfig-any-perl-0.33/lib/Config/Any.pm --- libconfig-any-perl-0.32/lib/Config/Any.pm 2017-04-23 21:51:13.000000000 +0000 +++ libconfig-any-perl-0.33/lib/Config/Any.pm 2023-05-03 15:21:10.000000000 +0000 @@ -6,7 +6,7 @@ use Carp; use Module::Pluggable::Object (); -our $VERSION = '0.32'; +our $VERSION = '0.33'; =head1 NAME @@ -314,22 +314,40 @@ L -And at least one of the following: -L -L -L -L -L -L -L +And at least one of the following for each file type to be supported: -=head1 INCOMPATIBILITIES +=over 4 -None reported. +=item * -=head1 BUGS AND LIMITATIONS +For C<.cnf>, C<.conf> files: L + +=item * + +For C<.ini> files: L + +=item * + +For C<.json>, C<.jsn> files: L, L, L, L, L, L, L + +=item * + +For C<.pl>, C<.perl> files: no additional requirements + +=item * -No bugs have been reported. +For C<.xml> files: L + +=item * + +For C<.yml>, C<.yaml> files: L, L, L + +=back + +Additionally, other file types are supported by third-party plugins in the C +namespace, installed separately. + +=head1 BUGS AND LIMITATIONS Please report any bugs or feature requests to C, or through the web interface at diff -Nru libconfig-any-perl-0.32/LICENSE libconfig-any-perl-0.33/LICENSE --- libconfig-any-perl-0.32/LICENSE 1970-01-01 00:00:00.000000000 +0000 +++ libconfig-any-perl-0.33/LICENSE 2023-05-03 15:23:35.000000000 +0000 @@ -0,0 +1,374 @@ +Terms of the Perl programming language system itself + +a) the GNU General Public License as published by the Free + Software Foundation; either version 1, or (at your option) any + later version, or +b) the "Artistic License" + +--- The GNU General Public License, Version 1, February 1989 --- + +This software is Copyright (c) 2023 by Joel Bernstein . + +This is free software, licensed under: + + The GNU General Public License, Version 1, February 1989 + + GNU GENERAL PUBLIC LICENSE + Version 1, February 1989 + + Copyright (C) 1989 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The license agreements of most software companies try to keep users +at the mercy of those companies. By contrast, our General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. The +General Public License applies to the Free Software Foundation's +software and to any other program whose authors commit to using it. +You can use it for your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Specifically, the General Public License is designed to make +sure that you have the freedom to give away or sell copies of free +software, that you receive source code or can get it if you want it, +that you can change the software or use pieces of it in new free +programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of a such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must tell them their rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any program or other work which +contains a notice placed by the copyright holder saying it may be +distributed under the terms of this General Public License. The +"Program", below, refers to any such program or work, and a "work based +on the Program" means either the Program or any work containing the +Program or a portion of it, either verbatim or with modifications. Each +licensee is addressed as "you". + + 1. You may copy and distribute verbatim copies of the Program's source +code as you receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice and +disclaimer of warranty; keep intact all the notices that refer to this +General Public License and to the absence of any warranty; and give any +other recipients of the Program a copy of this General Public License +along with the Program. You may charge a fee for the physical act of +transferring a copy. + + 2. You may modify your copy or copies of the Program or any portion of +it, and copy and distribute such modifications under the terms of Paragraph +1 above, provided that you also do the following: + + a) cause the modified files to carry prominent notices stating that + you changed the files and the date of any change; and + + b) cause the whole of any work that you distribute or publish, that + in whole or in part contains the Program or any part thereof, either + with or without modifications, to be licensed at no charge to all + third parties under the terms of this General Public License (except + that you may choose to grant warranty protection to some or all + third parties, at your option). + + c) If the modified program normally reads commands interactively when + run, you must cause it, when started running for such interactive use + in the simplest and most usual way, to print or display an + announcement including an appropriate copyright notice and a notice + that there is no warranty (or else, saying that you provide a + warranty) and that users may redistribute the program under these + conditions, and telling the user how to view a copy of this General + Public License. + + d) You may charge a fee for the physical act of transferring a + copy, and you may at your option offer warranty protection in + exchange for a fee. + +Mere aggregation of another independent work with the Program (or its +derivative) on a volume of a storage or distribution medium does not bring +the other work under the scope of these terms. + + 3. You may copy and distribute the Program (or a portion or derivative of +it, under Paragraph 2) in object code or executable form under the terms of +Paragraphs 1 and 2 above provided that you also do one of the following: + + a) accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of + Paragraphs 1 and 2 above; or, + + b) accompany it with a written offer, valid for at least three + years, to give any third party free (except for a nominal charge + for the cost of distribution) a complete machine-readable copy of the + corresponding source code, to be distributed under the terms of + Paragraphs 1 and 2 above; or, + + c) accompany it with the information you received as to where the + corresponding source code may be obtained. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form alone.) + +Source code for a work means the preferred form of the work for making +modifications to it. For an executable file, complete source code means +all the source code for all modules it contains; but, as a special +exception, it need not include source code for modules which are standard +libraries that accompany the operating system on which the executable +file runs, or for standard header files or definitions files that +accompany that operating system. + + 4. You may not copy, modify, sublicense, distribute or transfer the +Program except as expressly provided under this General Public License. +Any attempt otherwise to copy, modify, sublicense, distribute or transfer +the Program is void, and will automatically terminate your rights to use +the Program under this License. However, parties who have received +copies, or rights to use copies, from you under this General Public +License will not have their licenses terminated so long as such parties +remain in full compliance. + + 5. By copying, distributing or modifying the Program (or any work based +on the Program) you indicate your acceptance of this license to do so, +and all its terms and conditions. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the original +licensor to copy, distribute or modify the Program subject to these +terms and conditions. You may not impose any further restrictions on the +recipients' exercise of the rights granted herein. + + 7. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of the license which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +the license, you may choose any version ever published by the Free Software +Foundation. + + 8. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 9. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 10. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + Appendix: How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to humanity, the best way to achieve this is to make it +free software which everyone can redistribute and change under these +terms. + + To do so, attach the following notices to the program. It is safest to +attach them to the start of each source file to most effectively convey +the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + + + Copyright (C) 19yy + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19xx name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the +appropriate parts of the General Public License. Of course, the +commands you use may be called something other than `show w' and `show +c'; they could even be mouse-clicks or menu items--whatever suits your +program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + program `Gnomovision' (a program to direct compilers to make passes + at assemblers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +That's all there is to it! + + +--- The Artistic License 1.0 --- + +This software is Copyright (c) 2023 by Joel Bernstein . + +This is free software, licensed under: + + The Artistic License 1.0 + +The Artistic License + +Preamble + +The intent of this document is to state the conditions under which a Package +may be copied, such that the Copyright Holder maintains some semblance of +artistic control over the development of the package, while giving the users of +the package the right to use and distribute the Package in a more-or-less +customary fashion, plus the right to make reasonable modifications. + +Definitions: + + - "Package" refers to the collection of files distributed by the Copyright + Holder, and derivatives of that collection of files created through + textual modification. + - "Standard Version" refers to such a Package if it has not been modified, + or has been modified in accordance with the wishes of the Copyright + Holder. + - "Copyright Holder" is whoever is named in the copyright or copyrights for + the package. + - "You" is you, if you're thinking about copying or distributing this Package. + - "Reasonable copying fee" is whatever you can justify on the basis of media + cost, duplication charges, time of people involved, and so on. (You will + not be required to justify it to the Copyright Holder, but only to the + computing community at large as a market that must bear the fee.) + - "Freely Available" means that no fee is charged for the item itself, though + there may be fees involved in handling the item. It also means that + recipients of the item may redistribute it under the same conditions they + received it. + +1. You may make and give away verbatim copies of the source form of the +Standard Version of this Package without restriction, provided that you +duplicate all of the original copyright notices and associated disclaimers. + +2. You may apply bug fixes, portability fixes and other modifications derived +from the Public Domain or from the Copyright Holder. A Package modified in such +a way shall still be considered the Standard Version. + +3. You may otherwise modify your copy of this Package in any way, provided that +you insert a prominent notice in each changed file stating how and when you +changed that file, and provided that you do at least ONE of the following: + + a) place your modifications in the Public Domain or otherwise make them + Freely Available, such as by posting said modifications to Usenet or an + equivalent medium, or placing the modifications on a major archive site + such as ftp.uu.net, or by allowing the Copyright Holder to include your + modifications in the Standard Version of the Package. + + b) use the modified Package only within your corporation or organization. + + c) rename any non-standard executables so the names do not conflict with + standard executables, which must also be provided, and provide a separate + manual page for each non-standard executable that clearly documents how it + differs from the Standard Version. + + d) make other distribution arrangements with the Copyright Holder. + +4. You may distribute the programs of this Package in object code or executable +form, provided that you do at least ONE of the following: + + a) distribute a Standard Version of the executables and library files, + together with instructions (in the manual page or equivalent) on where to + get the Standard Version. + + b) accompany the distribution with the machine-readable source of the Package + with your modifications. + + c) accompany any non-standard executables with their corresponding Standard + Version executables, giving the non-standard executables non-standard + names, and clearly documenting the differences in manual pages (or + equivalent), together with instructions on where to get the Standard + Version. + + d) make other distribution arrangements with the Copyright Holder. + +5. You may charge a reasonable copying fee for any distribution of this +Package. You may charge any fee you choose for support of this Package. You +may not charge a fee for this Package itself. However, you may distribute this +Package in aggregate with other (possibly commercial) programs as part of a +larger (possibly commercial) software distribution provided that you do not +advertise this Package as a product of your own. + +6. The scripts and library files supplied as input to or produced as output +from the programs of this Package do not automatically fall under the copyright +of this Package, but belong to whomever generated them, and may be sold +commercially, and may be aggregated with this Package. + +7. C or perl subroutines supplied by you and linked into this Package shall not +be considered part of this Package. + +8. The name of the Copyright Holder may not be used to endorse or promote +products derived from this software without specific prior written permission. + +9. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED +WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. + +The End + diff -Nru libconfig-any-perl-0.32/maint/Makefile.PL.include libconfig-any-perl-0.33/maint/Makefile.PL.include --- libconfig-any-perl-0.32/maint/Makefile.PL.include 2017-02-21 17:21:24.000000000 +0000 +++ libconfig-any-perl-0.33/maint/Makefile.PL.include 2023-05-03 15:21:01.000000000 +0000 @@ -1,4 +1,4 @@ -BEGIN { -e 'Distar' or system("git clone git://git.shadowcat.co.uk/p5sagit/Distar.git") } +BEGIN { -e 'Distar' or system qw(git clone https://github.com/p5sagit/Distar.git) } use lib 'Distar/lib'; use Distar; diff -Nru libconfig-any-perl-0.32/Makefile.PL libconfig-any-perl-0.33/Makefile.PL --- libconfig-any-perl-0.32/Makefile.PL 2017-04-09 14:02:27.000000000 +0000 +++ libconfig-any-perl-0.33/Makefile.PL 2023-05-03 15:22:29.000000000 +0000 @@ -14,7 +14,7 @@ 'Module::Pluggable::Object' => '3.6', }, suggests => { - 'Config::General' => '2.47', + 'Config::General' => '2.48', 'Config::Tiny' => 0, 'Cpanel::JSON::XS' => 0, 'XML::Simple' => 0, @@ -24,7 +24,7 @@ }, develop => { requires => { - 'Config::General' => '2.47', + 'Config::General' => '2.48', 'Config::Tiny' => 0, 'Cpanel::JSON::XS' => 0, 'XML::Simple' => 0, @@ -37,8 +37,8 @@ }, resources => { repository => { - url => 'git://git.shadowcat.co.uk/p5sagit/Config-Any.git', - web => 'http://git.shadowcat.co.uk/gitweb/gitweb.cgi?p=p5sagit/Config-Any.git;a=summary', + url => 'https://github.com/p5sagit/Config-Any.git', + web => 'https://github.com/p5sagit/Config-Any', type => 'git', }, bugtracker => { @@ -53,11 +53,7 @@ x_authority => 'cpan:RATAXIS', ); -my %MM_ARGS = ( - PREREQ_PM => { - (eval { require Config::General } ? ('Config::General' => '2.47') : ()), - }, -); +my %MM_ARGS = (); ## BOILERPLATE ############################################################### require ExtUtils::MakeMaker; @@ -78,6 +74,9 @@ if $mymeta_broken; $MM_ARGS{META_ADD} = { 'meta-spec' => { version => 2 }, %META } unless -f 'META.yml'; +$MM_ARGS{PL_FILES} ||= {}; +$MM_ARGS{NORECURS} = 1 + if not exists $MM_ARGS{NORECURS}; for (qw(configure build test runtime)) { my $key = $_ eq 'runtime' ? 'PREREQ_PM' : uc $_.'_REQUIRES'; diff -Nru libconfig-any-perl-0.32/MANIFEST libconfig-any-perl-0.33/MANIFEST --- libconfig-any-perl-0.32/MANIFEST 2017-04-23 21:52:20.000000000 +0000 +++ libconfig-any-perl-0.33/MANIFEST 2023-05-03 15:23:35.000000000 +0000 @@ -52,3 +52,4 @@ META.yml Module YAML meta-data (added by MakeMaker) META.json Module JSON meta-data (added by MakeMaker) README README file (added by Distar) +LICENSE LICENSE file (added by Distar) diff -Nru libconfig-any-perl-0.32/META.json libconfig-any-perl-0.33/META.json --- libconfig-any-perl-0.32/META.json 2017-04-23 21:52:20.000000000 +0000 +++ libconfig-any-perl-0.33/META.json 2023-05-03 15:23:34.000000000 +0000 @@ -4,13 +4,13 @@ "Joel Bernstein " ], "dynamic_config" : 1, - "generated_by" : "ExtUtils::MakeMaker version 7.24, CPAN::Meta::Converter version 2.150005", + "generated_by" : "ExtUtils::MakeMaker version 7.66, CPAN::Meta::Converter version 2.150010", "license" : [ "perl_5" ], "meta-spec" : { "url" : "http://search.cpan.org/perldoc?CPAN::Meta::Spec", - "version" : "2" + "version" : 2 }, "name" : "Config-Any", "no_index" : { @@ -24,7 +24,7 @@ "configure" : {}, "develop" : { "requires" : { - "Config::General" : "2.47", + "Config::General" : "2.48", "Config::Tiny" : "0", "Cpanel::JSON::XS" : "0", "Test::Pod" : "0", @@ -39,7 +39,7 @@ "Module::Pluggable::Object" : "3.6" }, "suggests" : { - "Config::General" : "2.47", + "Config::General" : "2.48", "Config::Tiny" : "0", "Cpanel::JSON::XS" : "0", "XML::NamespaceSupport" : "0", @@ -64,11 +64,11 @@ ], "repository" : { "type" : "git", - "url" : "git://git.shadowcat.co.uk/p5sagit/Config-Any.git", - "web" : "http://git.shadowcat.co.uk/gitweb/gitweb.cgi?p=p5sagit/Config-Any.git;a=summary" + "url" : "https://github.com/p5sagit/Config-Any.git", + "web" : "https://github.com/p5sagit/Config-Any" } }, - "version" : "0.32", + "version" : "0.33", "x_authority" : "cpan:RATAXIS", - "x_serialization_backend" : "JSON::PP version 2.27300" + "x_serialization_backend" : "JSON::PP version 4.16" } diff -Nru libconfig-any-perl-0.32/META.yml libconfig-any-perl-0.33/META.yml --- libconfig-any-perl-0.32/META.yml 2017-04-23 21:52:20.000000000 +0000 +++ libconfig-any-perl-0.33/META.yml 2023-05-03 15:23:33.000000000 +0000 @@ -5,7 +5,7 @@ build_requires: Test::More: '0' dynamic_config: 1 -generated_by: 'ExtUtils::MakeMaker version 7.24, CPAN::Meta::Converter version 2.150005' +generated_by: 'ExtUtils::MakeMaker version 7.66, CPAN::Meta::Converter version 2.150010' license: perl meta-spec: url: http://module-build.sourceforge.net/META-spec-v1.4.html @@ -20,7 +20,7 @@ resources: bugtracker: https://rt.cpan.org/Public/Dist/Display.html?Name=Config-Any license: http://dev.perl.org/licenses/ - repository: git://git.shadowcat.co.uk/p5sagit/Config-Any.git -version: '0.32' + repository: https://github.com/p5sagit/Config-Any.git +version: '0.33' x_authority: cpan:RATAXIS x_serialization_backend: 'CPAN::Meta::YAML version 0.018' diff -Nru libconfig-any-perl-0.32/README libconfig-any-perl-0.33/README --- libconfig-any-perl-0.32/README 2017-04-23 21:52:20.000000000 +0000 +++ libconfig-any-perl-0.33/README 2023-05-03 15:23:35.000000000 +0000 @@ -37,7 +37,7 @@ Config::Any->load_files( { files => \@files, use_ext => 1 } ); Config::Any->load_files( { files => \@files, flatten_to_hash => 1 } ); - "load_files()" attempts to load configuration from the list of files + load_files() attempts to load configuration from the list of files passed in the "files" parameter, if the file exists. If the "filter" parameter is set, it is used as a callback to modify the @@ -57,7 +57,7 @@ a hash keyed on the file names, as opposed to the usual list of single-key hashes. - "load_files()" also supports a 'force_plugins' parameter, whose value + load_files() also supports a 'force_plugins' parameter, whose value should be an arrayref of plugin names like "Config::Any::INI". Its intended use is to allow the use of a non-standard file extension while forcing it to be offered to a particular parser. It is not compatible @@ -76,32 +76,32 @@ Config::Any->load_stems( { stems => \@stems, use_ext => 1 } ); Config::Any->load_stems( { stems => \@stems, flatten_to_hash => 1 } ); - "load_stems()" attempts to load configuration from a list of files which + load_stems() attempts to load configuration from a list of files which it generates by combining the filename stems list passed in the "stems" parameter with the potential filename extensions from each loader, which - you can check with the "extensions()" classmethod described below. Once + you can check with the extensions() classmethod described below. Once this list of possible filenames is built it is treated exactly as in - "load_files()" above, as which it takes the same parameters. Please read - the "load_files()" documentation before using this method. + load_files() above, as which it takes the same parameters. Please read + the load_files() documentation before using this method. finder( ) - The "finder()" classmethod returns the Module::Pluggable::Object object + The finder() classmethod returns the Module::Pluggable::Object object which is used to load the plugins. See the documentation for that module for more information. plugins( ) - The "plugins()" classmethod returns the names of configuration loading + The plugins() classmethod returns the names of configuration loading plugins as found by Module::Pluggable::Object. extensions( ) - The "extensions()" classmethod returns the possible file extensions - which can be loaded by "load_stems()" and "load_files()". This may be - useful if you set the "use_ext" parameter to those methods. + The extensions() classmethod returns the possible file extensions which + can be loaded by load_stems() and load_files(). This may be useful if + you set the "use_ext" parameter to those methods. DIAGNOSTICS "No files specified!" or "No stems specified!" - The "load_files()" and "load_stems()" methods will issue this - warning if called with an empty list of files/stems to load. + The load_files() and load_stems() methods will issue this warning if + called with an empty list of files/stems to load. "_load requires a arrayref of file paths" This fatal error will be thrown by the internal "_load" method. It @@ -115,15 +115,25 @@ DEPENDENCIES Module::Pluggable::Object - And at least one of the following: Config::General Config::Tiny JSON - YAML JSON::Syck YAML::Syck XML::Simple + And at least one of the following for each file type to be supported: -INCOMPATIBILITIES - None reported. + * For ".cnf", ".conf" files: Config::General -BUGS AND LIMITATIONS - No bugs have been reported. + * For ".ini" files: Config::Tiny + + * For ".json", ".jsn" files: Cpanel::JSON::XS, JSON::MaybeXS, + JSON::DWIW, JSON::XS, JSON::Syck, JSON::PP, JSON + + * For ".pl", ".perl" files: no additional requirements + + * For ".xml" files: XML::Simple + * For ".yml", ".yaml" files: YAML::XS, YAML::Syck, YAML + + Additionally, other file types are supported by third-party plugins in + the "Config::Any::" namespace, installed separately. + +BUGS AND LIMITATIONS Please report any bugs or feature requests to "bug-config-any@rt.cpan.org", or through the web interface at .